drivers/pcmcia : move pcmcia drivers to drivers/pcmcia

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

7 files changed, 2531 insertions, 0 deletions

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
new file mode 100644
index 000000000..55528c889
--- /dev/null
+++ b/drivers/pcmcia/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libpcmcia.a
+
+COBJS-y += mpc8xx_pcmcia.o
+COBJS-y += pxa_pcmcia.o
+COBJS-y += rpx_pcmcia.o
+COBJS-y += ti_pci1410a.o
+COBJS-y += tqm8xx_pcmcia.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
new file mode 100644
index 000000000..a40fcf41c
--- /dev/null
+++ b/drivers/pcmcia/i82365.c
@@ -0,0 +1,1014 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
+ * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
+ * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_I82365
+
+#include <command.h>
+#include <pci.h>
+#include <pcmcia.h>
+#include <asm/io.h>
+
+#include <pcmcia/ss.h>
+#include <pcmcia/i82365.h>
+#include <pcmcia/yenta.h>
+#ifdef CONFIG_CPC45
+#include <pcmcia/cirrus.h>
+#else
+#include <pcmcia/ti113x.h>
+#endif
+
+static struct pci_device_id supported[] = {
+#ifdef CONFIG_CPC45
+	{PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
+#else
+	{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510},
+#endif
+	{0, 0}
+};
+
+#define CYCLE_TIME	120
+
+#ifdef CONFIG_CPC45
+extern int SPD67290Init (void);
+#endif
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev);
+#endif
+
+typedef struct socket_info_t {
+	pci_dev_t	dev;
+	u_short		bcr;
+	u_char		pci_lat, cb_lat, sub_bus, cache;
+	u_int		cb_phys;
+
+	socket_cap_t	cap;
+	u_short		type;
+	u_int		flags;
+#ifdef CONFIG_CPC45
+	cirrus_state_t	c_state;
+#else
+	ti113x_state_t	state;
+#endif
+} socket_info_t;
+
+#ifdef CONFIG_CPC45
+/* These definitions must match the pcic table! */
+typedef enum pcic_id {
+	IS_PD6710, IS_PD672X, IS_VT83C469
+} pcic_id;
+
+typedef struct pcic_t {
+	char *name;
+} pcic_t;
+
+static pcic_t pcic[] = {
+	{" Cirrus PD6710: "},
+	{" Cirrus PD672x: "},
+	{" VIA VT83C469: "},
+};
+#endif
+
+static socket_info_t socket;
+static socket_state_t state;
+static struct pccard_mem_map mem;
+static struct pccard_io_map io;
+
+/*====================================================================*/
+
+/* Some PCI shortcuts */
+
+static int pci_readb (socket_info_t * s, int r, u_char * v)
+{
+	return pci_read_config_byte (s->dev, r, v);
+}
+static int pci_writeb (socket_info_t * s, int r, u_char v)
+{
+	return pci_write_config_byte (s->dev, r, v);
+}
+static int pci_readw (socket_info_t * s, int r, u_short * v)
+{
+	return pci_read_config_word (s->dev, r, v);
+}
+static int pci_writew (socket_info_t * s, int r, u_short v)
+{
+	return pci_write_config_word (s->dev, r, v);
+}
+#ifndef CONFIG_CPC45
+static int pci_readl (socket_info_t * s, int r, u_int * v)
+{
+	return pci_read_config_dword (s->dev, r, v);
+}
+static int pci_writel (socket_info_t * s, int r, u_int v)
+{
+	return pci_write_config_dword (s->dev, r, v);
+}
+#endif	/* !CONFIG_CPC45 */
+
+/*====================================================================*/
+
+#ifdef CONFIG_CPC45
+
+#define cb_readb(s)		readb((s)->cb_phys + 1)
+#define cb_writeb(s, v)		writeb(v, (s)->cb_phys)
+#define cb_writeb2(s, v)	writeb(v, (s)->cb_phys + 1)
+#define cb_readl(s, r)		readl((s)->cb_phys + (r))
+#define cb_writel(s, r, v)	writel(v, (s)->cb_phys + (r))
+
+
+static u_char i365_get (socket_info_t * s, u_short reg)
+{
+	u_char val;
+#ifdef CONFIG_PCMCIA_SLOT_A
+	int slot = 0;
+#else
+	int slot = 1;
+#endif
+
+	val = I365_REG (slot, reg);
+
+	cb_writeb (s, val);
+	val = cb_readb (s);
+
+	debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
+	return val;
+}
+
+static void i365_set (socket_info_t * s, u_short reg, u_char data)
+{
+#ifdef CONFIG_PCMCIA_SLOT_A
+	int slot = 0;
+#else
+	int slot = 1;
+#endif
+	u_char val;
+
+	val = I365_REG (slot, reg);
+
+	cb_writeb (s, val);
+	cb_writeb2 (s, data);
+
+	debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
+}
+
+#else	/* ! CONFIG_CPC45 */
+
+#define cb_readb(s, r)		readb((s)->cb_phys + (r))
+#define cb_readl(s, r)		readl((s)->cb_phys + (r))
+#define cb_writeb(s, r, v)	writeb(v, (s)->cb_phys + (r))
+#define cb_writel(s, r, v)	writel(v, (s)->cb_phys + (r))
+
+static u_char i365_get (socket_info_t * s, u_short reg)
+{
+	return cb_readb (s, 0x0800 + reg);
+}
+
+static void i365_set (socket_info_t * s, u_short reg, u_char data)
+{
+	cb_writeb (s, 0x0800 + reg, data);
+}
+#endif	/* CONFIG_CPC45 */
+
+static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) | mask);
+}
+
+static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) & ~mask);
+}
+
+#if 0	/* not used */
+static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
+{
+	u_char d = i365_get (s, reg);
+
+	i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
+}
+
+static u_short i365_get_pair (socket_info_t * s, u_short reg)
+{
+	return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
+}
+#endif	/* not used */
+
+static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
+{
+	i365_set (s, reg, data & 0xff);
+	i365_set (s, reg + 1, data >> 8);
+}
+
+#ifdef CONFIG_CPC45
+/*======================================================================
+
+    Code to save and restore global state information for Cirrus
+    PD67xx controllers, and to set and report global configuration
+    options.
+
+======================================================================*/
+
+#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
+
+static void cirrus_get_state (socket_info_t * s)
+{
+	int i;
+	cirrus_state_t *p = &s->c_state;
+
+	p->misc1 = i365_get (s, PD67_MISC_CTL_1);
+	p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+	p->misc2 = i365_get (s, PD67_MISC_CTL_2);
+	for (i = 0; i < 6; i++)
+		p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
+
+}
+
+static void cirrus_set_state (socket_info_t * s)
+{
+	int i;
+	u_char misc;
+	cirrus_state_t *p = &s->c_state;
+
+	misc = i365_get (s, PD67_MISC_CTL_2);
+	i365_set (s, PD67_MISC_CTL_2, p->misc2);
+	if (misc & PD67_MC2_SUSPEND)
+		udelay (50000);
+	misc = i365_get (s, PD67_MISC_CTL_1);
+	misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+	i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
+	for (i = 0; i < 6; i++)
+		i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
+}
+
+static u_int cirrus_set_opts (socket_info_t * s)
+{
+	cirrus_state_t *p = &s->c_state;
+	u_int mask = 0xffff;
+#if DEBUG
+	char buf[200];
+
+	memset (buf, 0, 200);
+#endif
+
+	if (has_ring == -1)
+		has_ring = 1;
+	flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
+	flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
+#if DEBUG
+	if (p->misc2 & PD67_MC2_IRQ15_RI)
+		strcat (buf, " [ring]");
+	if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
+		strcat (buf, " [dyn mode]");
+	if (p->misc1 & PD67_MC1_INPACK_ENA)
+		strcat (buf, " [inpack]");
+#endif
+
+	if (p->misc2 & PD67_MC2_IRQ15_RI)
+		mask &= ~0x8000;
+	if (has_led > 0) {
+#if DEBUG
+		strcat (buf, " [led]");
+#endif
+		mask &= ~0x1000;
+	}
+	if (has_dma > 0) {
+#if DEBUG
+		strcat (buf, " [dma]");
+#endif
+		mask &= ~0x0600;
+		flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
+#if DEBUG
+		if (p->misc2 & PD67_MC2_FREQ_BYPASS)
+			strcat (buf, " [freq bypass]");
+#endif
+	}
+
+	if (setup_time >= 0)
+		p->timer[0] = p->timer[3] = setup_time;
+	if (cmd_time > 0) {
+		p->timer[1] = cmd_time;
+		p->timer[4] = cmd_time * 2 + 4;
+	}
+	if (p->timer[1] == 0) {
+		p->timer[1] = 6;
+		p->timer[4] = 16;
+		if (p->timer[0] == 0)
+			p->timer[0] = p->timer[3] = 1;
+	}
+	if (recov_time >= 0)
+		p->timer[2] = p->timer[5] = recov_time;
+
+	debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
+		buf,
+		p->timer[0], p->timer[1], p->timer[2],
+		p->timer[3], p->timer[4], p->timer[5]);
+
+	return mask;
+}
+
+#else	/* !CONFIG_CPC45 */
+
+/*======================================================================
+
+    Code to save and restore global state information for TI 1130 and
+    TI 1131 controllers, and to set and report global configuration
+    options.
+
+======================================================================*/
+
+static void ti113x_get_state (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+
+	pci_readl (s, TI113X_SYSTEM_CONTROL, &p->sysctl);
+	pci_readb (s, TI113X_CARD_CONTROL, &p->cardctl);
+	pci_readb (s, TI113X_DEVICE_CONTROL, &p->devctl);
+	pci_readb (s, TI1250_DIAGNOSTIC, &p->diag);
+	pci_readl (s, TI12XX_IRQMUX, &p->irqmux);
+}
+
+static void ti113x_set_state (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+
+	pci_writel (s, TI113X_SYSTEM_CONTROL, p->sysctl);
+	pci_writeb (s, TI113X_CARD_CONTROL, p->cardctl);
+	pci_writeb (s, TI113X_DEVICE_CONTROL, p->devctl);
+	pci_writeb (s, TI1250_MULTIMEDIA_CTL, 0);
+	pci_writeb (s, TI1250_DIAGNOSTIC, p->diag);
+	pci_writel (s, TI12XX_IRQMUX, p->irqmux);
+	i365_set_pair (s, TI113X_IO_OFFSET (0), 0);
+	i365_set_pair (s, TI113X_IO_OFFSET (1), 0);
+}
+
+static u_int ti113x_set_opts (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+	u_int mask = 0xffff;
+
+	p->cardctl &= ~TI113X_CCR_ZVENABLE;
+	p->cardctl |= TI113X_CCR_SPKROUTEN;
+
+	return mask;
+}
+#endif	/* CONFIG_CPC45 */
+
+/*======================================================================
+
+    Routines to handle common CardBus options
+
+======================================================================*/
+
+/* Default settings for PCI command configuration register */
+#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
+		  PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
+
+static void cb_get_state (socket_info_t * s)
+{
+	pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
+	pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
+	pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
+	pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
+	pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
+	pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
+}
+
+static void cb_set_state (socket_info_t * s)
+{
+#ifndef CONFIG_CPC45
+	pci_writel (s, CB_LEGACY_MODE_BASE, 0);
+	pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys);
+#endif
+	pci_writew (s, PCI_COMMAND, CMD_DFLT);
+	pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
+	pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
+	pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
+	pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
+	pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
+	pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
+}
+
+static void cb_set_opts (socket_info_t * s)
+{
+#ifndef CONFIG_CPC45
+	if (s->cache == 0)
+		s->cache = 8;
+	if (s->pci_lat == 0)
+		s->pci_lat = 0xa8;
+	if (s->cb_lat == 0)
+		s->cb_lat = 0xb0;
+#endif
+}
+
+/*======================================================================
+
+    Power control for Cardbus controllers: used both for 16-bit and
+    Cardbus cards.
+
+======================================================================*/
+
+static int cb_set_power (socket_info_t * s, socket_state_t * state)
+{
+	u_int reg = 0;
+
+#ifdef CONFIG_CPC45
+
+	reg = I365_PWR_NORESET;
+	if (state->flags & SS_PWR_AUTO)
+		reg |= I365_PWR_AUTO;
+	if (state->flags & SS_OUTPUT_ENA)
+		reg |= I365_PWR_OUT;
+	if (state->Vpp != 0) {
+		if (state->Vpp == 120) {
+			reg |= I365_VPP1_12V;
+			puts (" 12V card found: ");
+		} else if (state->Vpp == state->Vcc) {
+			reg |= I365_VPP1_5V;
+		} else {
+			puts (" power not found: ");
+			return -1;
+		}
+	}
+	if (state->Vcc != 0) {
+		reg |= I365_VCC_5V;
+		if (state->Vcc == 33) {
+			puts (" 3.3V card found: ");
+			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else if (state->Vcc == 50) {
+			puts (" 5V card found: ");
+			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else {
+			puts (" power not found: ");
+			return -1;
+		}
+	}
+
+	if (reg != i365_get (s, I365_POWER)) {
+		reg = (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V);
+		i365_set (s, I365_POWER, reg);
+	}
+
+#else	/* ! CONFIG_CPC45 */
+
+	/* restart card voltage detection if it seems appropriate */
+	if ((state->Vcc == 0) && (state->Vpp == 0) &&
+	   !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
+		cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST);
+	switch (state->Vcc) {
+	case 0:
+		reg = 0;
+		break;
+	case 33:
+		reg = CB_SC_VCC_3V;
+		break;
+	case 50:
+		reg = CB_SC_VCC_5V;
+		break;
+	default:
+		return -1;
+	}
+	switch (state->Vpp) {
+	case 0:
+		break;
+	case 33:
+		reg |= CB_SC_VPP_3V;
+		break;
+	case 50:
+		reg |= CB_SC_VPP_5V;
+		break;
+	case 120:
+		reg |= CB_SC_VPP_12V;
+		break;
+	default:
+		return -1;
+	}
+	if (reg != cb_readl (s, CB_SOCKET_CONTROL))
+		cb_writel (s, CB_SOCKET_CONTROL, reg);
+#endif	/* CONFIG_CPC45 */
+	return 0;
+}
+
+/*======================================================================
+
+    Generic routines to get and set controller options
+
+======================================================================*/
+
+static void get_bridge_state (socket_info_t * s)
+{
+#ifdef CONFIG_CPC45
+	cirrus_get_state (s);
+#else
+	ti113x_get_state (s);
+#endif
+	cb_get_state (s);
+}
+
+static void set_bridge_state (socket_info_t * s)
+{
+	cb_set_state (s);
+	i365_set (s, I365_GBLCTL, 0x00);
+	i365_set (s, I365_GENCTL, 0x00);
+#ifdef CONFIG_CPC45
+	cirrus_set_state (s);
+#else
+	ti113x_set_state (s);
+#endif
+}
+
+static void set_bridge_opts (socket_info_t * s)
+{
+#ifdef CONFIG_CPC45
+	cirrus_set_opts (s);
+#else
+	ti113x_set_opts (s);
+#endif
+	cb_set_opts (s);
+}
+
+/*====================================================================*/
+#define PD67_EXT_INDEX		0x2e	/* Extension index */
+#define PD67_EXT_DATA		0x2f	/* Extension data */
+#define PD67_EXD_VS1(s)		(0x01 << ((s)<<1))
+
+#define pd67_ext_get(s, r) \
+    (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
+
+static int i365_get_status (socket_info_t * s, u_int * value)
+{
+	u_int status;
+#ifdef CONFIG_CPC45
+	u_char val;
+	u_char power, vcc, vpp;
+	u_int powerstate;
+#endif
+
+	status = i365_get (s, I365_IDENT);
+	status = i365_get (s, I365_STATUS);
+	*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
+	if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
+		*value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
+	} else {
+		*value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
+		*value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
+	}
+	*value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
+	*value |= (status & I365_CS_READY) ? SS_READY : 0;
+	*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
+
+#ifdef CONFIG_CPC45
+	/* Check for Cirrus CL-PD67xx chips */
+	i365_set (s, PD67_CHIP_INFO, 0);
+	val = i365_get (s, PD67_CHIP_INFO);
+	s->type = -1;
+	if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
+		val = i365_get (s, PD67_CHIP_INFO);
+		if ((val & PD67_INFO_CHIP_ID) == 0) {
+			s->type = (val & PD67_INFO_SLOTS) ? IS_PD672X : IS_PD6710;
+			i365_set (s, PD67_EXT_INDEX, 0xe5);
+			if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
+				s->type = IS_VT83C469;
+		}
+	} else {
+		printf ("no Cirrus Chip found\n");
+		*value = 0;
+		return -1;
+	}
+
+	power = i365_get (s, I365_POWER);
+	state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
+	state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
+	vcc = power & I365_VCC_MASK;
+	vpp = power & I365_VPP1_MASK;
+	state.Vcc = state.Vpp = 0;
+	if((vcc== 0) || (vpp == 0)) {
+		/*
+		 * On the Cirrus we get the info which card voltage
+		 * we have in EXTERN DATA and write it to MISC_CTL1
+		 */
+		powerstate = pd67_ext_get(s, PD67_EXTERN_DATA);
+		if (powerstate & PD67_EXD_VS1(0)) {
+			/* 5V Card */
+			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else {
+			/* 3.3V Card */
+			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		}
+		i365_set (s, I365_POWER, (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V));
+		power = i365_get (s, I365_POWER);
+	}
+	if (power & I365_VCC_5V) {
+		state.Vcc = (i365_get(s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) ? 33 : 50;
+	}
+
+	if (power == I365_VPP1_12V)
+		state.Vpp = 120;
+
+	/* IO card, RESET flags, IO interrupt */
+	power = i365_get (s, I365_INTCTL);
+	state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
+	if (power & I365_PC_IOCARD)
+		state.flags |= SS_IOCARD;
+	state.io_irq = power & I365_IRQ_MASK;
+
+	/* Card status change mask */
+	power = i365_get (s, I365_CSCINT);
+	state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
+	if (state.flags & SS_IOCARD)
+		state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
+	else {
+		state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
+		state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
+		state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
+	}
+	debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
+		"io_irq %d, csc_mask %#2.2x\n", state.flags,
+		state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
+
+#else	/* !CONFIG_CPC45 */
+
+	status = cb_readl (s, CB_SOCKET_STATE);
+	*value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0;
+	*value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0;
+	*value |= (status & CB_SS_XVCARD) ? SS_XVCARD : 0;
+	*value |= (status & CB_SS_VSENSE) ? 0 : SS_PENDING;
+	/* For now, ignore cards with unsupported voltage keys */
+	if (*value & SS_XVCARD)
+		*value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD);
+#endif	/* CONFIG_CPC45 */
+	return 0;
+}	/* i365_get_status */
+
+static int i365_set_socket (socket_info_t * s, socket_state_t * state)
+{
+	u_char reg;
+
+	set_bridge_state (s);
+
+	/* IO card, RESET flag */
+	reg = 0;
+	reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
+	reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
+	i365_set (s, I365_INTCTL, reg);
+
+#ifdef CONFIG_CPC45
+	cb_set_power (s, state);
+
+#if 0
+	/* Card status change interrupt mask */
+	reg = s->cs_irq << 4;
+	if (state->csc_mask & SS_DETECT)
+		reg |= I365_CSC_DETECT;
+	if (state->flags & SS_IOCARD) {
+		if (state->csc_mask & SS_STSCHG)
+			reg |= I365_CSC_STSCHG;
+	} else {
+		if (state->csc_mask & SS_BATDEAD)
+			reg |= I365_CSC_BVD1;
+		if (state->csc_mask & SS_BATWARN)
+			reg |= I365_CSC_BVD2;
+		if (state->csc_mask & SS_READY)
+			reg |= I365_CSC_READY;
+	}
+	i365_set (s, I365_CSCINT, reg);
+	i365_get (s, I365_CSC);
+#endif	/* 0 */
+
+#else	/* !CONFIG_CPC45 */
+
+	reg = I365_PWR_NORESET;
+	if (state->flags & SS_PWR_AUTO)
+		reg |= I365_PWR_AUTO;
+	if (state->flags & SS_OUTPUT_ENA)
+		reg |= I365_PWR_OUT;
+
+	cb_set_power (s, state);
+	reg |= i365_get (s, I365_POWER) & (I365_VCC_MASK | I365_VPP1_MASK);
+
+	if (reg != i365_get (s, I365_POWER))
+		i365_set (s, I365_POWER, reg);
+#endif	/* CONFIG_CPC45 */
+
+	return 0;
+}	/* i365_set_socket */
+
+/*====================================================================*/
+
+static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
+{
+	u_short base, i;
+	u_char map;
+
+	debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
+		mem->map, mem->flags, mem->speed,
+		mem->sys_start, mem->sys_stop, mem->card_start);
+
+	map = mem->map;
+	if ((map > 4) ||
+	    (mem->card_start > 0x3ffffff) ||
+	    (mem->sys_start > mem->sys_stop) ||
+	    (mem->speed > 1000)) {
+		return -1;
+	}
+
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
+
+	/* Take care of high byte, for PCI controllers */
+	i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
+
+	base = I365_MEM (map);
+	i = (mem->sys_start >> 12) & 0x0fff;
+	if (mem->flags & MAP_16BIT)
+		i |= I365_MEM_16BIT;
+	if (mem->flags & MAP_0WS)
+		i |= I365_MEM_0WS;
+	i365_set_pair (s, base + I365_W_START, i);
+
+	i = (mem->sys_stop >> 12) & 0x0fff;
+	switch (mem->speed / CYCLE_TIME) {
+	case 0:
+		break;
+	case 1:
+		i |= I365_MEM_WS0;
+		break;
+	case 2:
+		i |= I365_MEM_WS1;
+		break;
+	default:
+		i |= I365_MEM_WS1 | I365_MEM_WS0;
+		break;
+	}
+	i365_set_pair (s, base + I365_W_STOP, i);
+
+#ifdef CONFIG_CPC45
+	i = 0;
+#else
+	i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff;
+#endif
+	if (mem->flags & MAP_WRPROT)
+		i |= I365_MEM_WRPROT;
+	if (mem->flags & MAP_ATTRIB)
+		i |= I365_MEM_REG;
+	i365_set_pair (s, base + I365_W_OFF, i);
+
+#ifdef CONFIG_CPC45
+	/* set System Memory map Upper Adress */
+	i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
+	i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
+#endif
+
+	/* Turn on the window if necessary */
+	if (mem->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
+	return 0;
+}	/* i365_set_mem_map */
+
+static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
+{
+	u_char map, ioctl;
+
+	map = io->map;
+	/* comment out: comparison is always false due to limited range of data type */
+	if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
+	    (io->stop < io->start))
+		return -1;
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
+	i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
+	i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
+	ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
+	if (io->speed)
+		ioctl |= I365_IOCTL_WAIT (map);
+	if (io->flags & MAP_0WS)
+		ioctl |= I365_IOCTL_0WS (map);
+	if (io->flags & MAP_16BIT)
+		ioctl |= I365_IOCTL_16BIT (map);
+	if (io->flags & MAP_AUTOSZ)
+		ioctl |= I365_IOCTL_IOCS16 (map);
+	i365_set (s, I365_IOCTL, ioctl);
+	/* Turn on the window if necessary */
+	if (io->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
+	return 0;
+}	/* i365_set_io_map */
+
+/*====================================================================*/
+
+int i82365_init (void)
+{
+	u_int val;
+	int i;
+
+#ifdef CONFIG_CPC45
+	if (SPD67290Init () != 0)
+		return 1;
+#endif
+	if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
+		/* Controller not found */
+		return 1;
+	}
+	debug ("i82365 Device Found!\n");
+
+	pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys);
+	socket.cb_phys &= ~0xf;
+
+#ifdef CONFIG_CPC45
+	/* + 0xfe000000 see MPC 8245 Users Manual Adress Map B */
+	socket.cb_phys += 0xfe000000;
+#endif
+
+	get_bridge_state (&socket);
+	set_bridge_opts (&socket);
+
+	i = i365_get_status (&socket, &val);
+
+#ifdef CONFIG_CPC45
+	if (i > -1) {
+		puts (pcic[socket.type].name);
+	} else {
+		printf ("i82365: Controller not found.\n");
+		return 1;
+	}
+	if((val & SS_DETECT) != SS_DETECT){
+		puts ("No card\n");
+		return 1;
+	}
+#else	/* !CONFIG_CPC45 */
+	if (val & SS_DETECT) {
+		if (val & SS_3VCARD) {
+			state.Vcc = state.Vpp = 33;
+			puts (" 3.3V card found: ");
+		} else if (!(val & SS_XVCARD)) {
+			state.Vcc = state.Vpp = 50;
+			puts (" 5.0V card found: ");
+		} else {
+			puts ("i82365: unsupported voltage key\n");
+			state.Vcc = state.Vpp = 0;
+		}
+	} else {
+		/* No card inserted */
+		puts ("No card\n");
+		return 1;
+	}
+#endif	/* CONFIG_CPC45 */
+
+#ifdef CONFIG_CPC45
+	state.flags |= SS_OUTPUT_ENA;
+#else
+	state.flags = SS_IOCARD | SS_OUTPUT_ENA;
+	state.csc_mask = 0;
+	state.io_irq = 0;
+#endif
+
+	i365_set_socket (&socket, &state);
+
+	for (i = 500; i; i--) {
+		if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0) {
+		/* PC Card not ready for data transfer */
+		puts ("i82365 PC Card not ready for data transfer\n");
+		return 1;
+	}
+	debug (" PC Card ready for data transfer: ");
+
+	mem.map = 0;
+	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
+	mem.speed = 300;
+	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.card_start = 0;
+	i365_set_mem_map (&socket, &mem);
+
+#ifdef CONFIG_CPC45
+	mem.map = 1;
+	mem.flags = MAP_ACTIVE;
+	mem.speed = 300;
+	mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
+	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+	mem.card_start = 0;
+	i365_set_mem_map (&socket, &mem);
+
+#else	/* !CONFIG_CPC45 */
+
+	io.map = 0;
+	io.flags = MAP_AUTOSZ | MAP_ACTIVE;
+	io.speed = 0;
+	io.start = 0x0100;
+	io.stop = 0x010F;
+	i365_set_io_map (&socket, &io);
+
+#endif	/* CONFIG_CPC45 */
+
+#ifdef DEBUG
+	i82365_dump_regions (socket.dev);
+#endif
+
+	return 0;
+}
+
+void i82365_exit (void)
+{
+	io.map = 0;
+	io.flags = 0;
+	io.speed = 0;
+	io.start = 0;
+	io.stop = 0x1;
+
+	i365_set_io_map (&socket, &io);
+
+	mem.map = 0;
+	mem.flags = 0;
+	mem.speed = 0;
+	mem.sys_start = 0;
+	mem.sys_stop = 0x1000;
+	mem.card_start = 0;
+
+	i365_set_mem_map (&socket, &mem);
+
+#ifdef CONFIG_CPC45
+	mem.map = 1;
+	mem.flags = 0;
+	mem.speed = 0;
+	mem.sys_start = 0;
+	mem.sys_stop = 0x1000;
+	mem.card_start = 0;
+
+	i365_set_mem_map (&socket, &mem);
+#else	/* !CONFIG_CPC45 */
+	socket.state.sysctl &= 0xFFFF00FF;
+#endif
+	state.Vcc = state.Vpp = 0;
+
+	i365_set_socket (&socket, &state);
+}
+
+/*======================================================================
+
+    Debug stuff
+
+======================================================================*/
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev)
+{
+	u_int tmp[2];
+	u_int *mem = (void *) socket.cb_phys;
+	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+
+	pci_read_config_dword (dev, 0x00, tmp + 0);
+	pci_read_config_dword (dev, 0x80, tmp + 1);
+
+	printf ("PCI CONF: %08X ... %08X\n",
+		tmp[0], tmp[1]);
+	printf ("PCI MEM:  ... %08X ... %08X\n",
+		mem[0x8 / 4], mem[0x800 / 4]);
+	printf ("CIS:      ...%c%c%c%c%c%c%c%c...\n",
+		cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
+		cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
+	printf ("CIS CONF: %02X %02X %02X ...\n",
+		cis[0x200], cis[0x202], cis[0x204]);
+	printf ("IDE:      %02X %02X %02X %02X %02X %02X %02X %02X\n",
+		ide[0], ide[1], ide[2], ide[3],
+		ide[4], ide[5], ide[6], ide[7]);
+}
+#endif	/* DEBUG */
+
+#endif /* CONFIG_I82365 */
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
new file mode 100644
index 000000000..8a34cd305
--- /dev/null
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -0,0 +1,304 @@
+#include <common.h>
+#if defined(CONFIG_8xx)
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if defined(CONFIG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_8xx)	&& defined(CONFIG_PCMCIA)
+
+#if	defined(CONFIG_IDE_8xx_PCCARD)
+extern int check_ide_device (int slot);
+#endif
+
+extern int pcmcia_hardware_enable (int slot);
+extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
+
+#if defined(CONFIG_CMD_PCMCIA)
+extern int pcmcia_hardware_disable(int slot);
+#endif
+
+static u_int m8xx_get_graycode(u_int size);
+#if 0 /* Disabled */
+static u_int m8xx_get_speed(u_int ns, u_int is_io);
+#endif
+
+/* look up table for pgcrx registers */
+u_int *pcmcia_pgcrx[2] = {
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+};
+
+/*
+ * Search this table to see if the windowsize is
+ * supported...
+ */
+
+#define M8XX_SIZES_NO 32
+
+static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
+{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
+  0x00000080, 0x00000040, 0x00000010, 0x00000020,
+  0x00008000, 0x00004000, 0x00001000, 0x00002000,
+  0x00000100, 0x00000200, 0x00000800, 0x00000400,
+
+  0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x01000000, 0x02000000, 0xffffffff, 0x04000000,
+  0x00010000, 0x00020000, 0x00080000, 0x00040000,
+  0x00800000, 0x00400000, 0x00100000, 0x00200000 };
+
+
+/* -------------------------------------------------------------------- */
+
+#ifdef	CONFIG_HMI10
+#define	HMI10_FRAM_TIMING	(	PCMCIA_SHT(2)	\
+ 				|	PCMCIA_SST(2)	\
+ 				|	PCMCIA_SL(4))
+#endif
+
+#if	defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
+#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
+ 				|	PCMCIA_SST(3)	\
+ 				|	PCMCIA_SL(12))
+#else
+#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
+ 				|	PCMCIA_SST(4)	\
+ 				|	PCMCIA_SL(9))
+#endif
+
+/* -------------------------------------------------------------------- */
+
+int pcmcia_on (void)
+{
+	u_long reg, base;
+	pcmcia_win_t *win;
+	u_int slotbit;
+	u_int rc, slot;
+	int i;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* intialize the fixed memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+	base = CFG_PCMCIA_MEM_ADDR;
+
+	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+		printf ("Cannot set window size to 0x%08x\n",
+			CFG_PCMCIA_MEM_SIZE);
+		return (1);
+	}
+
+	slotbit = PCMCIA_SLOT_x;
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		win->br = base;
+
+#if	(PCMCIA_SOCKETS_NO == 2)
+		if (i == 4) /* Another slot starting from win 4 */
+			slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
+#endif
+		switch (i) {
+#ifdef	CONFIG_IDE_8xx_PCCARD
+		case 4:
+#ifdef	CONFIG_HMI10
+		{	/* map FRAM area */
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	HMI10_FRAM_TIMING );
+			break;
+		}
+#endif
+		case 0:	{	/* map attribute memory */
+			win->or = (	PCMCIA_BSIZE_64M
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+		case 5:
+		case 1: {	/* map I/O window for data reg */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_16
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+		case 6:
+		case 2: {	/* map I/O window for cmd/ctrl reg block */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+#ifdef	CONFIG_HMI10
+		case 3: {	/* map I/O window for 4xUART data/ctrl */
+			win->br += 0x40000;
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+#endif	/* CONFIG_HMI10 */
+		default:	/* set to not valid */
+			win->or = 0;
+			break;
+		}
+
+		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
+		       i, win->br, win->or);
+		base += CFG_PCMCIA_MEM_SIZE;
+		++win;
+	}
+
+	for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
+		/* turn off voltage */
+		if ((rc = pcmcia_voltage_set(slot, 0, 0)))
+			continue;
+
+		/* Enable external hardware */
+		if ((rc = pcmcia_hardware_enable(slot)))
+			continue;
+
+#ifdef	CONFIG_IDE_8xx_PCCARD
+		if ((rc = check_ide_device(i)))
+			continue;
+#endif
+	}
+	return rc;
+}
+
+#if defined(CONFIG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	int i;
+	pcmcia_win_t *win;
+
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* clear interrupt state, and disable interrupts */
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/* turn off interrupt and disable CxOE */
+	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
+
+	/* turn off memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		/* disable memory window */
+		win->or = 0;
+		++win;
+	}
+
+	/* turn off voltage */
+	pcmcia_voltage_set(_slot_, 0, 0);
+
+	/* disable external hardware */
+	printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
+	pcmcia_hardware_disable(_slot_);
+	return 0;
+}
+#endif
+
+
+static u_int m8xx_get_graycode(u_int size)
+{
+	u_int k;
+
+	for (k = 0; k < M8XX_SIZES_NO; k++) {
+		if(m8xx_size_to_gray[k] == size)
+			break;
+	}
+
+	if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+		k = -1;
+
+	return k;
+}
+
+#if	0
+
+#if	defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+
+/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
+ * SYPCR is write once only, therefore must the slowest memory be faster
+ * than the bus monitor or we will get a machine check due to the bus timeout.
+ */
+#undef	PCMCIA_BMT_LIMIT
+#define	PCMCIA_BMT_LIMIT (6*8)
+#endif
+
+static u_int m8xx_get_speed(u_int ns, u_int is_io)
+{
+	u_int reg, clocks, psst, psl, psht;
+
+	if(!ns) {
+
+		/*
+		* We get called with IO maps setup to 0ns
+		* if not specified by the user.
+		* They should be 255ns.
+		*/
+
+		if(is_io)
+			ns = 255;
+		else
+			ns = 100;  /* fast memory if 0 */
+	}
+
+	/*
+	* In PSST, PSL, PSHT fields we tell the controller
+	* timing parameters in CLKOUT clock cycles.
+	* CLKOUT is the same as GCLK2_50.
+	*/
+
+	/* how we want to adjust the timing - in percent */
+
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
+
+	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+	clocks = (clocks * ADJ) / (100*1000);
+
+	if(clocks >= PCMCIA_BMT_LIMIT) {
+		DEBUG(0, "Max access time limit reached\n");
+		clocks = PCMCIA_BMT_LIMIT-1;
+	}
+
+	psst = clocks / 7;          /* setup time */
+	psht = clocks / 7;          /* hold time */
+	psl  = (clocks * 5) / 7;    /* strobe length */
+
+	psst += clocks - (psst + psht + psl);
+
+	reg =  psst << 12;
+	reg |= psl  << 7;
+	reg |= psht << 16;
+
+	return reg;
+}
+#endif	/* 0 */
+
+#endif	/* CONFIG_8xx && CONFIG_PCMCIA */
diff --git a/drivers/pcmcia/pxa_pcmcia.c b/drivers/pcmcia/pxa_pcmcia.c
new file mode 100644
index 000000000..6020e4628
--- /dev/null
+++ b/drivers/pcmcia/pxa_pcmcia.c
@@ -0,0 +1,95 @@
+#include <common.h>
+#include <config.h>
+
+#ifdef CONFIG_PXA_PCMCIA
+
+#include <pcmcia.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+
+static inline void msWait(unsigned msVal)
+{
+	udelay(msVal*1000);
+}
+
+int pcmcia_on (void)
+{
+	unsigned int reg_arr[] = {
+		0x48000028, CFG_MCMEM0_VAL,
+		0x4800002c, CFG_MCMEM1_VAL,
+		0x48000030, CFG_MCATT0_VAL,
+		0x48000034, CFG_MCATT1_VAL,
+		0x48000038, CFG_MCIO0_VAL,
+		0x4800003c, CFG_MCIO1_VAL,
+
+		0, 0
+	};
+	int i, rc;
+
+#ifdef CONFIG_EXADRON1
+	int cardDetect;
+	volatile unsigned int *v_pBCRReg =
+			(volatile unsigned int *) 0x08000000;
+#endif
+
+	debug ("%s\n", __FUNCTION__);
+
+	i = 0;
+	while (reg_arr[i])
+		*((volatile unsigned int *) reg_arr[i++]) |= reg_arr[i++];
+	udelay (1000);
+
+	debug ("%s: programmed mem controller \n", __FUNCTION__);
+
+#ifdef CONFIG_EXADRON1
+
+/*define useful BCR masks */
+#define BCR_CF_INIT_VAL  		    0x00007230
+#define BCR_CF_PWRON_BUSOFF_RESETOFF_VAL    0x00007231
+#define BCR_CF_PWRON_BUSOFF_RESETON_VAL     0x00007233
+#define BCR_CF_PWRON_BUSON_RESETON_VAL      0x00007213
+#define BCR_CF_PWRON_BUSON_RESETOFF_VAL     0x00007211
+
+	/* we see from the GPIO bit if the card is present */
+	cardDetect = !(GPLR0 & GPIO_bit (14));
+
+	if (cardDetect) {
+		printf ("No PCMCIA card found!\n");
+	}
+
+	/* reset the card via the BCR line */
+	*v_pBCRReg = (unsigned) BCR_CF_INIT_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETOFF_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETOFF_VAL;
+	msWait (1500);
+
+	/* enable address bus */
+	GPCR1 = 0x01;
+	/* and the first CF slot */
+	MECR = 0x00000002;
+
+#endif /* EXADRON 1 */
+
+	rc = check_ide_device (0);	/* use just slot 0 */
+
+	return rc;
+}
+
+#if defined(CONFIG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_PXA_PCMCIA */
diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c
new file mode 100644
index 000000000..c7c425b93
--- /dev/null
+++ b/drivers/pcmcia/rpx_pcmcia.c
@@ -0,0 +1,73 @@
+/* -------------------------------------------------------------------- */
+/* RPX Boards from Embedded Planet					*/
+/* -------------------------------------------------------------------- */
+#include <common.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if defined(CONFIG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	defined(CONFIG_PCMCIA)	\
+	&& (defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE))
+
+#define	PCMCIA_BOARD_MSG	"RPX CLASSIC or RPX LITE"
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	u_long reg = 0;
+
+	switch(vcc) {
+		case 0: break;
+		case 33: reg |= BCSR1_PCVCTL4; break;
+		case 50: reg |= BCSR1_PCVCTL5; break;
+		default: return 1;
+	}
+
+	switch(vpp) {
+		case 0: break;
+		case 33:
+		case 50:
+			if(vcc == vpp)
+				reg |= BCSR1_PCVCTL6;
+			else
+				return 1;
+			break;
+		case 120:
+			reg |= BCSR1_PCVCTL7;
+			default: return 1;
+	}
+
+	/* first, turn off all power */
+	*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
+			| BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
+
+	/* enable new powersettings */
+	*((uint *)RPX_CSR_ADDR) |= reg;
+
+	return 0;
+}
+
+int pcmcia_hardware_enable (int slot)
+{
+	return 0;	/* No hardware to enable */
+}
+
+#if defined(CONFIG_CMD_PCMCIA)
+static int pcmcia_hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif
+
+
+#endif	/* CONFIG_PCMCIA && (CONFIG_RPXCLASSIC || CONFIG_RPXLITE) */
diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
new file mode 100644
index 000000000..208ca50a7
--- /dev/null
+++ b/drivers/pcmcia/ti_pci1410a.c
@@ -0,0 +1,665 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
+ * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
+ *
+ * "The ExCA standard specifies that socket controllers should provide
+ * two IO and five memory windows per socket, which can be independently
+ * configured and positioned in the host address space and mapped to
+ * arbitrary segments of card address space. " - David A Hinds. 1999
+ *
+ * This controller does _not_ meet the ExCA standard.
+ *
+ * m8xx pcmcia controller brief info:
+ * + 8 windows (attrib, mem, i/o)
+ * + up to two slots (SLOT_A and SLOT_B)
+ * + inputpins, outputpins, event and mask registers.
+ * - no offset register. sigh.
+ *
+ * Because of the lacking offset register we must map the whole card.
+ * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
+ * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
+ * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
+ * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
+ * They are maximum 64KByte each...
+ */
+
+
+#undef DEBUG		/**/
+
+/*
+ * PCMCIA support
+ */
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <pci.h>
+#include <asm/io.h>
+
+#include <pcmcia.h>
+
+#if defined(CONFIG_CMD_PCMCIA) && defined(CONFIG_IDE_TI_CARDBUS)
+
+int pcmcia_on(int ide_base_bus);
+
+static int  pcmcia_off(void);
+static int  hardware_disable(int slot);
+static int  hardware_enable(int slot);
+static int  voltage_set(int slot, int vcc, int vpp);
+static void print_funcid(int func);
+static void print_fixed(volatile uchar *p);
+static int  identify(volatile uchar *p);
+static int  check_ide_device(int slot, int ide_base_bus);
+
+
+/* ------------------------------------------------------------------------- */
+
+
+const char *indent = "\t   ";
+
+/* ------------------------------------------------------------------------- */
+
+
+int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#ifndef CFG_FIRST_PCMCIA_BUS
+# define CFG_FIRST_PCMCIA_BUS 0
+#endif
+
+	int rcode = 0;
+
+	if (argc != 2) {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+	if (strcmp(argv[1],"on") == 0) {
+		rcode = pcmcia_on(CFG_FIRST_PCMCIA_BUS);
+	} else if (strcmp(argv[1],"off") == 0) {
+		rcode = pcmcia_off();
+	} else {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+
+	return rcode;
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+static struct pci_device_id supported[] = {
+	{ PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */
+	{ PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */
+	{ }
+};
+
+static pci_dev_t devbusfn;
+static u32 socket_base;
+static u32 pcmcia_cis_ptr;
+
+int pcmcia_on(int ide_base_bus)
+{
+	u16 dev_id;
+	u32 socket_status;
+	int slot = 0;
+	int cis_len;
+	u16 io_base;
+	u16 io_len;
+
+	/*
+	 * Find the CardBus PCI device(s).
+	 */
+	if ((devbusfn = pci_find_devices(supported, 0)) < 0) {
+		printf("Ti CardBus: not found\n");
+		return 1;
+	}
+
+	pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id);
+
+	if (dev_id == 0xac56) {
+		debug("Enable PCMCIA Ti PCI1510\n");
+	} else {
+		debug("Enable PCMCIA Ti PCI1410A\n");
+	}
+
+	pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN;
+	cis_len = CFG_PCMCIA_CIS_WIN_SIZE;
+
+	io_base = CFG_PCMCIA_IO_WIN;
+	io_len = CFG_PCMCIA_IO_WIN_SIZE;
+
+	/*
+	 * Setup the PCI device.
+	 */
+	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base);
+	socket_base &= ~0xf;
+
+	socket_status = readl(socket_base+8);
+	if ((socket_status & 6) == 0) {
+		printf("Card Present: ");
+
+		switch (socket_status & 0x3c00) {
+
+		case 0x400:
+			printf("5V ");
+			break;
+		case 0x800:
+			printf("3.3V ");
+			break;
+		case 0xc00:
+			printf("3.3/5V ");
+			break;
+		default:
+			printf("unsupported Vcc ");
+			break;
+		}
+		switch (socket_status & 0x30) {
+		case 0x10:
+			printf("16bit PC-Card\n");
+			break;
+		case 0x20:
+			printf("32bit CardBus Card\n");
+			break;
+		default:
+			printf("8bit PC-Card\n");
+			break;
+		}
+	}
+
+
+	writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */
+	writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */
+
+	/* Careful: the linux yenta driver do not seem to reset the offset
+	 * in the i/o windows, so leaving them non-zero is a problem */
+
+	writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */
+	writeb(io_base>>8, socket_base + 0x809);
+	writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */
+	writeb((io_base + io_len - 1)>>8, socket_base + 0x80b);
+	writeb(0x00, socket_base + 0x836);      /* I/O window 0 offset address 0x000 */
+	writeb(0x00, socket_base + 0x837);
+
+
+	writeb((pcmcia_cis_ptr&0x000ff000) >> 12,
+	       socket_base + 0x810); /* Memory window 0 start address bits 19-12 */
+	writeb((pcmcia_cis_ptr&0x00f00000) >> 20,
+	       socket_base + 0x811);  /* Memory window 0 start address bits 23-20 */
+	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12,
+		socket_base + 0x812); /* Memory window 0 end address bits 19-12*/
+	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20,
+		socket_base + 0x813); /* Memory window 0 end address bits 23-20*/
+	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */
+	writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and
+					    * options (read/write, attribute access) */
+	writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control  */
+	writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */
+
+	writeb((pcmcia_cis_ptr & 0xff000000) >> 24,
+	       socket_base + 0x840); /* Memory window address bits 31-24 */
+
+
+	/* turn off voltage */
+	if (voltage_set(slot, 0, 0)) {
+		return 1;
+	}
+
+	/* Enable external hardware */
+	if (hardware_enable(slot)) {
+		return 1;
+	}
+
+	if (check_ide_device(slot, ide_base_bus)) {
+		return 1;
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+static int pcmcia_off (void)
+{
+	int slot = 0;
+
+	writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */
+
+	writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */
+	writeb(0x00, socket_base + 0x809);
+	writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */
+	writeb(0x00, socket_base + 0x80b);
+	writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address  */
+	writeb(0x00, socket_base + 0x837);
+
+	writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address  */
+	writeb(0x00, socket_base + 0x80d);
+	writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address  */
+	writeb(0x00, socket_base + 0x80f);
+	writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address  */
+	writeb(0x00, socket_base + 0x839);
+
+	writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */
+	writeb(0x00, socket_base + 0x811);
+	writeb(0x00, socket_base + 0x812); /* Memory window 0 end address  */
+	writeb(0x00, socket_base + 0x813);
+	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */
+	writeb(0x00, socket_base + 0x815);
+
+	writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */
+
+
+	/* turn off voltage */
+	voltage_set(slot, 0, 0);
+
+	/* disable external hardware */
+	printf ("Shutdown and Poweroff Ti PCI1410A\n");
+	hardware_disable(slot);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+#define	MAX_TUPEL_SZ	512
+#define MAX_FEATURES	4
+int ide_devices_found;
+static int check_ide_device(int slot, int ide_base_bus)
+{
+	volatile uchar *ident = NULL;
+	volatile uchar *feature_p[MAX_FEATURES];
+	volatile uchar *p, *start;
+	int n_features = 0;
+	uchar func_id = ~0;
+	uchar code, len;
+	ushort config_base = 0;
+	int found = 0;
+	int i;
+	u32 socket_status;
+
+	debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr);
+
+	socket_status = readl(socket_base+8);
+
+	if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) {
+		printf("no card or CardBus card\n");
+		return 1;
+	}
+
+	start = p = (volatile uchar *) pcmcia_cis_ptr;
+
+	while ((p - start) < MAX_TUPEL_SZ) {
+
+		code = *p; p += 2;
+
+		if (code == 0xFF) { /* End of chain */
+			break;
+		}
+
+		len = *p; p += 2;
+#if defined(DEBUG) && (DEBUG > 1)
+		{
+			volatile uchar *q = p;
+			printf ("\nTuple code %02x  length %d\n\tData:",
+				code, len);
+
+			for (i = 0; i < len; ++i) {
+				printf (" %02x", *q);
+				q+= 2;
+			}
+		}
+#endif	/* DEBUG */
+		switch (code) {
+		case CISTPL_VERS_1:
+			ident = p + 4;
+			break;
+		case CISTPL_FUNCID:
+			/* Fix for broken SanDisk which may have 0x80 bit set */
+			func_id = *p & 0x7F;
+			break;
+		case CISTPL_FUNCE:
+			if (n_features < MAX_FEATURES)
+				feature_p[n_features++] = p;
+			break;
+		case CISTPL_CONFIG:
+			config_base = (*(p+6) << 8) + (*(p+4));
+			debug ("\n## Config_base = %04x ###\n", config_base);
+		default:
+			break;
+		}
+		p += 2 * len;
+	}
+
+	found = identify(ident);
+
+	if (func_id != ((uchar)~0)) {
+		print_funcid (func_id);
+
+		if (func_id == CISTPL_FUNCID_FIXED)
+			found = 1;
+		else
+			return 1;	/* no disk drive */
+	}
+
+	for (i=0; i<n_features; ++i) {
+		print_fixed(feature_p[i]);
+	}
+
+	if (!found) {
+		printf("unknown card type\n");
+		return 1;
+	}
+
+	/* select config index 1 */
+	writeb(1, pcmcia_cis_ptr + config_base);
+
+#if 0
+	printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base));
+	printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2));
+	printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4));
+	printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6));
+#endif
+	ide_devices_found |= (1 << (slot+ide_base_bus));
+
+	return 0;
+}
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u32 socket_control;
+	int reg=0;
+
+	switch (slot) {
+	case 0:
+		reg = socket_base + 0x10;
+		break;
+	default:
+		return 1;
+	}
+
+	socket_control = 0;
+
+
+	switch (vcc) {
+	case 50:
+		socket_control |= 0x20;
+		break;
+	case 33:
+		socket_control |= 0x30;
+		break;
+	case 0:
+	default:
+	}
+
+	switch (vpp) {
+	case 120:
+		socket_control |= 0x1;
+		break;
+	case 50:
+		socket_control |= 0x2;
+		break;
+	case 33:
+		socket_control |= 0x3;
+		break;
+	case 0:
+	default:
+	}
+
+	writel(socket_control, reg);
+
+	debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n",
+		slot, vcc/10, vcc%10, vpp/10, vpp%10);
+
+	udelay(500);
+	return 0;
+}
+
+
+static int hardware_enable(int slot)
+{
+	u32 socket_status;
+	u16 brg_ctrl;
+	int is_82365sl;
+
+	socket_status = readl(socket_base+8);
+
+	if ((socket_status & 6) == 0) {
+
+		switch (socket_status & 0x3c00) {
+
+		case 0x400:
+			printf("5V ");
+			voltage_set(slot, 50, 0);
+			break;
+		case 0x800:
+			voltage_set(slot, 33, 0);
+			break;
+		case 0xc00:
+			voltage_set(slot, 33, 0);
+			break;
+		default:
+			voltage_set(slot, 0, 0);
+			break;
+		}
+	} else {
+		voltage_set(slot, 0, 0);
+	}
+
+	pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl);
+	brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl);
+	is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2);
+	writeb(is_82365sl?0x90:0x98, socket_base+0x802);
+	writeb(0x67, socket_base+0x803);
+	udelay(100000);
+#if 0
+	printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n",
+	       readb(socket_base+0x800), readb(socket_base+0x801),
+	       readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl);
+#endif
+
+	return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1;
+}
+
+
+static int hardware_disable(int slot)
+{
+	voltage_set(slot, 0, 0);
+	return 0;
+}
+
+static void print_funcid(int func)
+{
+	puts(indent);
+	switch (func) {
+	case CISTPL_FUNCID_MULTI:
+		puts(" Multi-Function");
+		break;
+	case CISTPL_FUNCID_MEMORY:
+		puts(" Memory");
+		break;
+	case CISTPL_FUNCID_SERIAL:
+		puts(" Serial Port");
+		break;
+	case CISTPL_FUNCID_PARALLEL:
+		puts(" Parallel Port");
+		break;
+	case CISTPL_FUNCID_FIXED:
+		puts(" Fixed Disk");
+		break;
+	case CISTPL_FUNCID_VIDEO:
+		puts(" Video Adapter");
+		break;
+	case CISTPL_FUNCID_NETWORK:
+		puts(" Network Adapter");
+		break;
+	case CISTPL_FUNCID_AIMS:
+		puts(" AIMS Card");
+		break;
+	case CISTPL_FUNCID_SCSI:
+		puts(" SCSI Adapter");
+		break;
+	default:
+		puts(" Unknown");
+		break;
+	}
+	puts(" Card\n");
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void print_fixed(volatile uchar *p)
+{
+	if (p == NULL)
+		return;
+
+	puts(indent);
+
+	switch (*p) {
+	case CISTPL_FUNCE_IDE_IFACE:
+		{   uchar iface = *(p+2);
+
+			puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
+			puts (" interface ");
+			break;
+		}
+	case CISTPL_FUNCE_IDE_MASTER:
+	case CISTPL_FUNCE_IDE_SLAVE:
+		{
+			uchar f1 = *(p+2);
+			uchar f2 = *(p+4);
+
+			puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
+
+			if (f1 & CISTPL_IDE_UNIQUE) {
+				puts(" [unique]");
+			}
+
+			puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
+
+			if (f2 & CISTPL_IDE_HAS_SLEEP) {
+				puts(" [sleep]");
+			}
+
+			if (f2 & CISTPL_IDE_HAS_STANDBY) {
+				puts(" [standby]");
+			}
+
+			if (f2 & CISTPL_IDE_HAS_IDLE) {
+				puts(" [idle]");
+			}
+
+			if (f2 & CISTPL_IDE_LOW_POWER) {
+				puts(" [low power]");
+			}
+
+			if (f2 & CISTPL_IDE_REG_INHIBIT) {
+				puts(" [reg inhibit]");
+			}
+
+			if (f2 & CISTPL_IDE_HAS_INDEX) {
+				puts(" [index]");
+			}
+
+			if (f2 & CISTPL_IDE_IOIS16) {
+				puts(" [IOis16]");
+			}
+
+			break;
+		}
+	}
+	putc('\n');
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define MAX_IDENT_CHARS		64
+#define	MAX_IDENT_FIELDS	4
+
+static uchar *known_cards[] = {
+	"ARGOSY PnPIDE D5",
+	NULL
+};
+
+static int identify(volatile uchar *p)
+{
+	uchar id_str[MAX_IDENT_CHARS];
+	uchar data;
+	uchar *t;
+	uchar **card;
+	int i, done;
+
+	if (p == NULL)
+		return (0);	/* Don't know */
+
+	t = id_str;
+	done =0;
+
+	for (i=0; i<=4 && !done; ++i, p+=2) {
+		while ((data = *p) != '\0') {
+			if (data == 0xFF) {
+				done = 1;
+				break;
+			}
+			*t++ = data;
+			if (t == &id_str[MAX_IDENT_CHARS-1]) {
+				done = 1;
+				break;
+			}
+			p += 2;
+		}
+		if (!done)
+			*t++ = ' ';
+	}
+	*t = '\0';
+	while (--t > id_str) {
+		if (*t == ' ') {
+			*t = '\0';
+		} else {
+			break;
+		}
+	}
+	puts(id_str);
+	putc('\n');
+
+	for (card=known_cards; *card; ++card) {
+		debug ("## Compare against \"%s\"\n", *card);
+		if (strcmp(*card, id_str) == 0) {	/* found! */
+			debug ("## CARD FOUND ##\n");
+			return 1;
+		}
+	}
+
+	return 0;	/* don't know */
+}
+
+#endif /* CONFIG_IDE_TI_CARDBUS */
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
new file mode 100644
index 000000000..132c7a516
--- /dev/null
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -0,0 +1,330 @@
+/* -------------------------------------------------------------------- */
+/* TQM8xxL Boards by TQ Components					*/
+/* SC8xx   Boards by SinoVee Microsystems				*/
+/* -------------------------------------------------------------------- */
+#include <common.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if defined(CONFIG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	defined(CONFIG_PCMCIA)	\
+	&& (defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx))
+
+#if	defined(CONFIG_VIRTLAB2)
+#define	PCMCIA_BOARD_MSG	"Virtlab2"
+#elif	defined(CONFIG_TQM8xxL)
+#define	PCMCIA_BOARD_MSG	"TQM8xxL"
+#elif	defined(CONFIG_SVM_SC8xx)
+#define	PCMCIA_BOARD_MSG	"SC8xx"
+#endif
+
+#if	defined(CONFIG_NSCU)
+
+#define	power_config(slot)	do {} while (0)
+#define	power_off(slot)		do {} while (0)
+#define	power_on_5_0(slot)	do {} while (0)
+#define	power_on_3_3(slot)	do {} while (0)
+
+#elif	defined(CONFIG_HMI10)
+
+static inline void power_config(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/*
+	 * Configure Port B  pins for
+	 * 5 Volts Enable and 3 Volts enable
+	*/
+	immap->im_cpm.cp_pbpar &= ~(0x00000300);
+}
+
+static inline void power_off(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/* remove all power */
+	immap->im_cpm.cp_pbdat |= 0x00000300;
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_cpm.cp_pbdat &= ~(0x0000100);
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_cpm.cp_pbdat &= ~(0x0000200);
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+}
+
+#elif	defined(CONFIG_VIRTLAB2)
+
+#define	power_config(slot)	do {} while (0)
+static inline void power_off(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+	*powerctl = 0;
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+			*powerctl = 2;	/* Enable 5V Vccout */
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+			*powerctl = 1;	/* Enable 3.3V Vccout */
+}
+
+#else
+
+static inline void power_config(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable
+	*/
+	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
+	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
+}
+
+static inline void power_off(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat |= 0x0004;
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat |= 0x0002;
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+}
+
+#endif
+
+#ifdef	CONFIG_HMI10
+static inline int check_card_is_absent(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	return pcmp->pcmc_pipr & (0x10000000 >> (slot << 4));
+}
+#else
+static inline int check_card_is_absent(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	return pcmp->pcmc_pipr & (0x18000000 >> (slot << 4));
+}
+#endif
+
+#ifdef	NSCU_OE_INV
+#define	NSCU_GCRX_CXOE	0
+#else
+#define	NSCU_GCRX_CXOE	__MY_PCMCIA_GCRX_CXOE
+#endif
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	volatile sysconf8xx_t *sysp =
+		(sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= NSCU_GCRX_CXOE;
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	power_config(slot);
+	power_off(slot);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n", __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+
+	if (check_card_is_absent(slot)) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	if ((reg & mask) == mask) {
+		power_on_5_0(slot);
+		puts (" 5.0V card found: ");
+	} else {
+		power_on_3_3(slot);
+		puts (" 3.3V card found: ");
+	}
+
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+
+	udelay(1000);
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg &= ~NSCU_GCRX_CXOE;
+
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if defined(CONFIG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+
+	/* remove all power */
+	power_off(slot);
+
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+#ifndef CONFIG_NSCU
+	u_long reg;
+# ifdef DEBUG
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+# endif
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(slot);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg |= NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("PCMCIA power OFF\n");
+	power_config(slot);
+	power_off(slot);
+
+	switch(vcc) {
+		case  0: 			break;
+		case 33: power_on_3_3(slot);	break;
+		case 50: power_on_5_0(slot);	break;
+		default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug("PIPR: 0x%x --> %s\n", pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	if (vcc)
+		debug("PCMCIA powered at %sV\n", (vcc == 50) ? "5.0" : "3.3");
+	else
+		debug("PCMCIA powered down\n");
+
+done:
+	debug("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg &= ~NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", slot+'A');
+#endif	/* CONFIG_NSCU */
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA && (CONFIG_TQM8xxL || CONFIG_SVM_SC8xx) */