From a89c33db96a1e55319a286dd4c3c05ca64ac6bfd Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 May 2009 17:06:54 +0200 Subject: General help message cleanup Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk --- common/cmd_nand.c | 45 +++++++++++++++++++++++---------------------- 1 file changed, 23 insertions(+), 22 deletions(-) (limited to 'common/cmd_nand.c') diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 1992531f4..94514160b 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -476,25 +476,26 @@ usage: return 1; } -U_BOOT_CMD(nand, 5, 1, do_nand, - "NAND sub-system", - "info - show available NAND devices\n" - "nand device [dev] - show or set current device\n" - "nand read - addr off|partition size\n" - "nand write - addr off|partition size\n" - " read/write 'size' bytes starting at offset 'off'\n" - " to/from memory address 'addr', skipping bad blocks.\n" - "nand erase [clean] [off size] - erase 'size' bytes from\n" - " offset 'off' (entire device if not specified)\n" - "nand bad - show bad blocks\n" - "nand dump[.oob] off - dump page\n" - "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" - "nand markbad off - mark bad block at offset (UNSAFE)\n" - "nand biterr off - make a bit error at offset (UNSAFE)\n" +U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, + "NAND sub-system", + "info - show available NAND devices\n" + "nand device [dev] - show or set current device\n" + "nand read - addr off|partition size\n" + "nand write - addr off|partition size\n" + " read/write 'size' bytes starting at offset 'off'\n" + " to/from memory address 'addr', skipping bad blocks.\n" + "nand erase [clean] [off size] - erase 'size' bytes from\n" + " offset 'off' (entire device if not specified)\n" + "nand bad - show bad blocks\n" + "nand dump[.oob] off - dump page\n" + "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" + "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n" + "nand biterr off - make a bit error at offset (UNSAFE)" #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK - "nand lock [tight] [status]\n" - " bring nand to lock state or display locked pages\n" - "nand unlock [offset] [size] - unlock section\n" + "\n" + "nand lock [tight] [status]\n" + " bring nand to lock state or display locked pages\n" + "nand unlock [offset] [size] - unlock section" #endif ); @@ -673,8 +674,8 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "boot from NAND device", - "[partition] | [[[loadAddr] dev] offset]\n"); - + "[partition] | [[[loadAddr] dev] offset]" +); #endif #else /* CONFIG_NAND_LEGACY */ @@ -941,7 +942,7 @@ U_BOOT_CMD( " offset `off' (entire device if not specified)\n" "nand bad - show bad blocks\n" "nand read.oob addr off size - read out-of-band data\n" - "nand write.oob addr off size - read out-of-band data\n" + "nand write.oob addr off size - read out-of-band data" ); int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -1081,7 +1082,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nboot, 4, 1, do_nandboot, "boot from NAND device", - "loadAddr dev\n" + "loadAddr dev" ); #endif -- cgit v1.2.3