From 29f3be0caf0799ca6b89dfd9824c15619a50000f Mon Sep 17 00:00:00 2001
From: Peter Pearse <peter.pearse@arm.com>
Date: Wed, 9 May 2007 10:24:38 +0100
Subject: Makefile permissions

---
 Makefile | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 mode change 100644 => 100755 Makefile

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
old mode 100644
new mode 100755
-- 
cgit v1.2.3


From b0d8f5bf0d215adc9424cb228b2484dbf07f7761 Mon Sep 17 00:00:00 2001
From: Peter Pearse <peter.pearse@arm.com>
Date: Wed, 9 May 2007 11:37:56 +0100
Subject: New board SMN42 branch

---
 Makefile | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index ceee2c7be..3e547fdb3 100755
--- a/Makefile
+++ b/Makefile
@@ -2100,7 +2100,10 @@ evb4510_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
 
 lpc2292sodimm_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm
+	@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
+
+SMN42_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
 
 #########################################################################
 ## XScale Systems
-- 
cgit v1.2.3


From 1443a31457d68f7e8f0b9403e9832ec1e79dc59d Mon Sep 17 00:00:00 2001
From: Peter Pearse <peter.pearse@arm.com>
Date: Fri, 18 May 2007 14:33:11 +0100
Subject: Makefile permissions

---
 Makefile | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 mode change 100755 => 100644 Makefile

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
old mode 100755
new mode 100644
-- 
cgit v1.2.3


From 32922cdc470fdfd39bea0c1c4f582d3fb340421e Mon Sep 17 00:00:00 2001
From: Ed Swarthout <Ed.Swarthout@freescale.com>
Date: Tue, 5 Jun 2007 12:30:52 -0500
Subject: mpc8641 image size cleanup

e600 does not have a bootpg restriction.
Move the version string to beginning of image at fff00000.
Resetvec.S is not needed.
Update flash copy instructions.
Add tftpflash env variable

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
 Makefile | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 94cda54c7..df8c3cd66 100644
--- a/Makefile
+++ b/Makefile
@@ -173,9 +173,6 @@ endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
-ifeq ($(CPU),mpc86xx)
-OBJS += cpu/$(CPU)/resetvec.o
-endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
 OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
-- 
cgit v1.2.3


From c440bfe6d6d92d66478a7e84402b31f48413617b Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 6 Jun 2007 11:42:13 +0200
Subject: ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board

This patch adds NAND booting support for the AMCC Acadia eval board.

Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.

I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:

=> bootstrap 267 nor	;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand	;to configure the board for 267MHz NNAND booting

Signed-off-by: Stefan Roese <sr@denx.de>
---
 Makefile | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 463757c43..6b70dd53b 100644
--- a/Makefile
+++ b/Makefile
@@ -1017,6 +1017,15 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
 acadia_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
 
+acadia_nand_config:	unconfig
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)nand_spl
+	@mkdir -p $(obj)board/amcc/acadia
+	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
+	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 ADCIOP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
-- 
cgit v1.2.3


From b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Fri, 15 Jun 2007 08:18:01 +0200
Subject: [ppc4xx] Add initial lwmon5 board support

This patch adds initial support for the Liebherr lwmon5 board euqipped
with an AMCC 440EPx PowerPC.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 Makefile | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index d5e220aad..2d8cff3ff 100644
--- a/Makefile
+++ b/Makefile
@@ -1139,6 +1139,9 @@ katmai_config:	unconfig
 luan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
 
+lwmon5_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+
 METROBOX_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
-- 
cgit v1.2.3


From 566a494f592ae3b3c0785d90d4e1ba45574880c4 Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@pollux.denx.de>
Date: Fri, 22 Jun 2007 19:11:54 +0200
Subject: [PCS440EP]      upgrade the PCS440EP board:                 - Show on
 the Status LEDs, some States of the board.                 - Get the MAC
 addresses from the EEProm                 - use PREBOOT                 - use
 the CF on the board.                 - check the U-Boot image in the Flash
 with a SHA1                   checksum.                 - use dynamic TLB
 entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
---
 Makefile | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index d5e220aad..3d64d1673 100644
--- a/Makefile
+++ b/Makefile
@@ -245,7 +245,7 @@ __LIBS := $(subst $(obj),,$(LIBS))
 #########################################################################
 #########################################################################
 
-ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
+ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
 
 all:		$(ALL)
 
@@ -265,6 +265,9 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
 
+$(obj)u-boot.sha1:	$(obj)u-boot.bin
+		./tools/ubsha1 $(obj)u-boot.bin
+
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
@@ -2455,7 +2458,7 @@ clean:
 	      $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
 	      $(obj)examples/test_burst
 	rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
-		$(obj)tools/gen_eth_addr
+		$(obj)tools/gen_eth_addr $(obj)tools/ubsha1
 	rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
 	rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
 	rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
@@ -2478,7 +2481,7 @@ clobber:	clean
 	rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
 	rm -fr $(obj)*.*~
 	rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
 	rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
 	rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
 	[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
-- 
cgit v1.2.3


From 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 3 Jul 2007 00:17:28 -0600
Subject: Fix Makefile to use $(MKCONFIG) macro for all board ports

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 Makefile | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 2d8cff3ff..3b71b21e2 100644
--- a/Makefile
+++ b/Makefile
@@ -424,7 +424,7 @@ jupiter_config:         unconfig
 	@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 
 v38b_config: unconfig
-	@./mkconfig -a v38b ppc mpc5xxx v38b
+	@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 
 inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
@@ -1027,7 +1027,7 @@ ADCIOP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
 alpr_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
 
 AP1000_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1239,7 +1239,7 @@ rainier_nand_config: unconfig
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sc3_config:unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx sc3
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
@@ -1405,7 +1405,7 @@ ep8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
 
 ep82xxm_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
+	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
 
 gw8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
@@ -1841,7 +1841,7 @@ TQM8560_config:		unconfig
 #########################################################################
 
 MPC8641HPCN_config:    unconfig
-	@./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn
 
 
 #########################################################################
@@ -2411,12 +2411,12 @@ suzaku_config:	unconfig
 ml401_config:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_ML401 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
 
 xupv2p_config:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_XUPV2P 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
 
 #########################################################################
 ## Blackfin
@@ -2441,7 +2441,7 @@ bf561-ezkit_config:	unconfig
 #########################################################################
 
 atstk1002_config	:	unconfig
-	@./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
 
 #########################################################################
 #########################################################################
-- 
cgit v1.2.3


From b44896215a09c60fa40cae906f7ed207bbc2c492 Mon Sep 17 00:00:00 2001
From: Sergei Poselenov <sposelenov@emcraft.com>
Date: Thu, 5 Jul 2007 08:17:37 +0200
Subject: Merged POST framework with the current TOT.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
---
 Makefile | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 2d8cff3ff..626283f70 100644
--- a/Makefile
+++ b/Makefile
@@ -214,6 +214,8 @@ LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
 	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
+LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
+	"post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
 LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
 	"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
 LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
-- 
cgit v1.2.3


From 96e1d75be8193ca79e4215a368bf9d7f2362450f Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@pollux.denx.de>
Date: Wed, 11 Jul 2007 18:39:11 +0200
Subject: [PCS440EP]  - Show on the DIAG LEDs, if the SHA1 check failed        
     - now the Flash ST M29W040B is supported (not tested)             - fix
 the "led" command             - fix compile error, if BUILD_DIR is used

Signed-off-by: Heiko Schocher <hs@denx.de>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 47e4e670a..c45700e08 100644
--- a/Makefile
+++ b/Makefile
@@ -268,7 +268,7 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 		-d $< $@
 
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
-		./tools/ubsha1 $(obj)u-boot.bin
+		$(obj)./tools/ubsha1 $(obj)u-boot.bin
 
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
-- 
cgit v1.2.3


From fa1df308926a6f70e3504c57514ef27ac31fd13a Mon Sep 17 00:00:00 2001
From: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed, 11 Jul 2007 20:11:07 +0200
Subject: CM1.QP1: Support for the Schindler CM1.QP1 board.

Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
---
 Makefile | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 626283f70..9c1a0b2a3 100644
--- a/Makefile
+++ b/Makefile
@@ -529,6 +529,14 @@ PM520_ROMBOOT_DDR_config:	unconfig
 smmaco4_config: unconfig
 	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
+cm1_qp1_config:	unconfig
+	@ >include/config.h
+	@[ -z "$(findstring cm1_qp1,$@)" ] || \
+		{  echo "... with 64 MByte SDRAM" ; \
+		  echo "... with 32 MByte Flash" ; \
+		}
+	@./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+
 spieval_config:	unconfig
 	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
 
-- 
cgit v1.2.3


From 011595307731a7a67a7445d107c279d031e8ab97 Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@pollux.denx.de>
Date: Sat, 14 Jul 2007 01:06:58 +0200
Subject: [PCS440EP]  - fix compile error, if BUILD_DIR is used

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index bfa38460d..3af9962e6 100644
--- a/Makefile
+++ b/Makefile
@@ -268,7 +268,7 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 		-d $< $@
 
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
-		$(obj)./tools/ubsha1 $(obj)u-boot.bin
+		$(obj)tools/ubsha1 $(obj)u-boot.bin
 
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
-- 
cgit v1.2.3


From 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 Mon Sep 17 00:00:00 2001
From: Rafal Jaworowski <raj@semihalf.com>
Date: Fri, 27 Jul 2007 14:43:59 +0200
Subject: [ADS5121] Support for the ADS5121 board

The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
 Makefile | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 3af9962e6..5b87aad5b 100644
--- a/Makefile
+++ b/Makefile
@@ -641,6 +641,13 @@ motionpro_config:         unconfig
 	@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 
 
+#########################################################################
+## MPC512x Systems
+#########################################################################
+ads5121_config: unconfig
+	@$(MKCONFIG) ads5121 ppc mpc512x ads5121
+
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
-- 
cgit v1.2.3


From cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 2 Aug 2007 00:48:45 +0200
Subject: Fix build errors and warnings / code cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 Makefile | 74 +++++++++++++++++++++++++++++++++++-----------------------------
 1 file changed, 40 insertions(+), 34 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 3b71b21e2..97dfb9d2e 100644
--- a/Makefile
+++ b/Makefile
@@ -1646,14 +1646,15 @@ r5200_config :		unconfig
 
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config: unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define CFG_33MHZ" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define CFG_66MHZ" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
 
@@ -1661,23 +1662,24 @@ MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
 MPC832XEMDS_SLAVE_config:	unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo -n "... PCI HOST " ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
 		echo "...PCI SLAVE 66M"  ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define PCI_33M" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define PCI_66M" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
 
@@ -1702,23 +1704,24 @@ MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
 MPC8360EMDS_SLAVE_config:	unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo -n "... PCI HOST " ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
 		echo "...PCI SLAVE 66M"  ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define PCI_33M" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define PCI_66M" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
 
@@ -1744,10 +1747,10 @@ MPC8540EVAL_66_slave_config:      unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "... 33 MHz PCI" ; \
+		echo "... 33 MHz PCI" ; \
 	else \
 		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-		echo -n "... 66 MHz PCI" ; \
+		echo "... 66 MHz PCI" ; \
 	fi ; \
 	if [ "$(findstring _slave_,$@)" ] ; then \
 		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
@@ -2008,13 +2011,13 @@ omap1610h2_cs3boot_config \
 omap1610h2_cs_autoboot_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
-		echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
 		echo "... configured for CS0 boot"; \
 	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
-		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
 		echo "... configured for CS_AUTO boot"; \
 	else \
-		echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
 		echo "... configured for CS3 boot"; \
 	fi;
 	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@@ -2183,11 +2186,12 @@ logodl_config	:	unconfig
 
 pdnb3_config \
 scpu_config:    unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring scpu_,$@)" ] ; then \
-		echo "#define CONFIG_SCPU"      >>include/config.h ; \
+		echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
 		echo "... on SCPU board variant" ; \
 	else \
-		>include/config.h ; \
+		>$(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
 
@@ -2409,13 +2413,15 @@ suzaku_config:	unconfig
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 ml401_config:	unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_ML401 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@ >$(obj)include/config.h
+	@echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
 
 xupv2p_config:	unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_XUPV2P 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@ >$(obj)include/config.h
+	@echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
 
 #########################################################################
-- 
cgit v1.2.3


From 63e22764d2f8653f68888c667eb65b3996b52680 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 2 Aug 2007 10:11:18 +0200
Subject: Minor cleanup of <board>_nand build rules.

---
 Makefile | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 97dfb9d2e..e7577d10f 100644
--- a/Makefile
+++ b/Makefile
@@ -1015,9 +1015,8 @@ acadia_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
 
 acadia_nand_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/acadia
+	@mkdir -p $(obj)include $(obj)board/amcc/acadia
+	@mkdir -p $(obj)nand_spl/board/amcc/acadia
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@@ -1045,9 +1044,8 @@ bamboo_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
 
 bamboo_nand_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/bamboo
+	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
+	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@@ -1228,9 +1226,8 @@ rainier_config: unconfig
 
 sequoia_nand_config \
 rainier_nand_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/sequoia
+	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
+	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-- 
cgit v1.2.3


From 86b116b1b1e165ca4840daefed36d2e3b8460173 Mon Sep 17 00:00:00 2001
From: Bartlomiej Sieka <tur@semihalf.com>
Date: Fri, 3 Aug 2007 12:08:16 +0200
Subject: cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200
 family.

Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on

Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
---
 Makefile | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 5b87aad5b..7f5aefe47 100644
--- a/Makefile
+++ b/Makefile
@@ -532,13 +532,8 @@ PM520_ROMBOOT_DDR_config:	unconfig
 smmaco4_config: unconfig
 	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
-cm1_qp1_config:	unconfig
-	@ >include/config.h
-	@[ -z "$(findstring cm1_qp1,$@)" ] || \
-		{  echo "... with 64 MByte SDRAM" ; \
-		  echo "... with 32 MByte Flash" ; \
-		}
-	@./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+cm5200_config:	unconfig
+	@./mkconfig -a cm5200 ppc mpc5xxx cm5200
 
 spieval_config:	unconfig
 	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
-- 
cgit v1.2.3


From 0f460a1ee148b648ee242c3157650287d4296260 Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.jin@freescale.com>
Date: Fri, 13 Jul 2007 12:14:58 +0800
Subject: Configurations for ATI video card BIOS emulator

This patch add definition of the BIOS emulator and the ATI framebuffer
driver for MPC8641HPCN board.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'Makefile')

diff --git a/Makefile b/Makefile
index 4fdd485fb..20aa9c26f 100644
--- a/Makefile
+++ b/Makefile
@@ -205,6 +205,7 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/nand/libnand.a
 LIBS += drivers/nand_legacy/libnand_legacy.a
 ifeq ($(CPU),mpc83xx)
-- 
cgit v1.2.3