aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-12-21ENGR00137214 MX50: Turn on ZQ calib config by default and fix hang problemrel_imx_2.6.35_10.12.01_RC4rel_imx_2.6.35_10.12.01_RC3Robby Cai
1) Turn on ZQ calib config by default in uboot. 2) Remove one problematic statement which can cause hang issue 3) Change comment style from ; to // Signed-off-by: Robby Cai <R63905@freescale.com> (cherry picked from commit 09671e589705148725467863a9f84b9011bdfe03)
2010-12-10MX51: Add video supportStefano Babic
Add framebuffer driver for the MX51 processor working on the IPUv3 internal graphic processor. The port is based on the driver found in the kernel delivered by Freescale as part of i.MX BSP: [kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f] [agust@denx.de: some style fixes and dead code removal] Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> (cherry picked from commit 5dda7945d18077db81eb0cfdc2f9d4525e6b77b1)
2010-12-10MX51: Add IPU driver for video supportStefano Babic
The patch is a porting of the IPU Linux driver developed by Freescale to have framebuffer functionalities in u-boot. The port is based on kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f, as delivered by Freescale [i.MX BSP]. Most features are dropped from the original driver and only LCD support is the goal of this porting. Signed-off-by: Stefano Babic <sbabic@denx.de> (cherry picked from commit 575001e40c9d10e63f2924649098e7c07d3985c7)
2010-12-10Add linux framebuffer header include/linux/fb.hStefano Babic
[port of linux 2.6.34 commit 6a9ee8af344e3bd7dbd61e67037096cdf7f83289] Signed-off-by: Stefano Babic <sbabic@denx.de> (cherry picked from commit bf90ecd3c366177c55012e68d15b8aeb2c41e907)
2010-12-08ENGR00136042 Add ZQ calib config and update script for DDR2Robby Cai
script v2: http://compass.freescale.net/livelink/livelink/219931536/ Codex_DDR2_266MHz.inc.txt?func=doc.Fetch&nodeid=219931536 Signed-off-by: Robby Cai <R63905@freescale.com>
2010-12-08ENGR00136031 mfgtool: sync config file for mx50 rdpPeter Chen
Some configs for mx50 rdp is missed at mfg-tool firmware config file Signed-off-by: Peter Chen <peter.chen@freescale.com>
2010-12-07ENGR00134220-2 Need use CONFIG_SYS_NAND_MAX_CHIPSJason Liu
Need use CONFIG_SYS_NAND_MAX_CHIPS instead of NAND_MAX_CHIPS Signed-off-by: Jason Liu <r64343@freescale.com>
2010-12-07ENGR00134220-1 NAND: fix up the chip select handlingJason Liu
When the NAND has multi-cs, the chip select other than cs0 is not handled correctly which will lead to NAND not function as expected Signed-off-by: Jason Liu <r64343@freescale.com>
2010-12-03NAND: Update to support 64 bit device sizeSandeep Paulraj
This patch adds support for NANDs greater than 2 GB. Patch is based on the MTD NAND driver in the kernel. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2010-12-01ENGR00133744: Merge mx50_arm2 to mx50_rdpTerry Lv
Merge mx50_arm2 to mx50_rdp. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-12-01ENGR00025557: MX50 Add ZQ calibration support for TO1.1.1.Terry Lv
MX50 Add ZQ calibration support for TO1.1.1. This need to be enabled by CONFIG_ZQ_CALIB. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-12-01ENGR00133437 MX50 Uboot support for TO 1.1.1 precodeAnish Trivedi
Precoding: Update DDR configuration plugin to check SI Rev and change ROM addresses as needed. Signed-off-by: Anish Trivedi <anish@freescale.com>
2010-12-01ENGR00133579 Uboot ESDHCv3 Remove workaround for DLLAnish Trivedi
On MX50 TO 1.0, DLL did not work in slave mode, so slave override mode was used instead. Removed this workaround, except for TO 1.0. Starting with TO 1.1, the DLL in slave mode is working as expected. Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com>
2010-11-26ENGR00134098-2 MX53: Add fastboot support for android.Sammy He
Add fastboot support for mx53 EVK android. Signed-off-by: Sammy He <r62914@freescale.com>
2010-11-26ENGR00134098-1 MX51: Update fastboot usb init seqSammy He
Update fastboot usb init seq, and use defined macro for coding. Signed-off-by: Sammy He <r62914@freescale.com>
2010-11-18ENGR00133124: Add nand support for mx50 rdpTerry Lv
Add nand support for mx50 rdp. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-11-19ENGR00133551-2 Add fastboot driver support for android.Sammy He
Add fastboot driver support for android. In this commit, basic fastboot command is supported. 1) Reboot board >fastboot reboot 2) Get information of board, e.g, product name >fastboot getvar product 3) Download images in PC and flash to SD card >fastboot flash bootloader u-boot-no-padding.bin >fastboot flash kernel uImage >fastboot flash uramdisk uramdisk.img >fastboot flash system system.img >fastboot flash recovery recovery.img Certainly, SD card must have been formatted as Android user guider doc already. Signed-off-by: Sammy He <r62914@freescale.com>
2010-11-18ENGR00133551-1 Add freescale usb udc support for i.mx51 platform.Sammy He
Add imx_udc for usb gadget on i.mx51 platform. Signed-off-by: Hu Hui <b29976@freescale.com> Signed-off-by: Sammy He <r62914@freescale.com>
2010-11-17ENGR00133743 Change code style of fastboot code to pass review-commits.Sammy He
cmd_fastboot.c and fastboot.h cannot pass review-commits, this patch only change code style to fix the errors, but not fixed all warnings. Signed-off-by: Sammy He <r62914@freescale.com>
2010-11-16Get common/cmd_fastboot.c and include/fastboot.h from omap uboot git.Tom Rix
The code realized common Android USB fastboot protocol. The snapshot can be found of the link: http://dev.omapzoom.org/?p=bootloader/u-boot.git;a=commit; h=9c7c5d8ea2326bf8d2d0bfbe670455fb497eb053 Signed-off-by: Tom Rix <Tom.Rix@windriver.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
2010-11-15ENGR00132909 MX53 Uboot: Support for TO2Anish Trivedi
Support new DDR script entitled "Rita_TO2_init_DDR2_CPU2_CMOS_TEST_CAL_v1.inc" for DDR2 boards including MX53 EVK, ARD, and ARM2 CPU2. These new settings did not apply to TO1. Therefore, changed the DCD for these boards to a plugin so that TO1 and TO2 can both be supported using conditional execution of new DDR settings. During bootup on TO2, DDR frequency is required to be below 400 MHz. Therefore, BOOT_CFG2[4] must be set to enable DDR at 333 MHz in ROM on all boards. Uboot determines silicon version and for TO2 boosts the VCC and VDDA voltages to 1.3V, after which the DDR frequency is also increased to 400 MHz. This requirement meant that uboot does not calibrate PLL2 anymore until the voltage is increased. Removed the calibration from lowlevel_init.S and from all mx53 include/configs files. Also required that during config_periph_clk(), only CBCMR register is touched to set source PLL. Other changes to CBCDR were removed. Switching to PLL2 bypass clk during reprogram was also removed. All these changes are required to increase DDR frequency to 400 MHz. DDR2 CPU2 board with TO1 requires the following hw cfgs: JP3 populated, and J8 set to 2-3. For DDR2 CPU2 board with TO2, both these jumpers should be depopulated. ARM2 CPU3 (with DDR3) DDR configurations were not changed. TO1 and TO2 can run well using existing DDR3 script. However, DCD was converted to plugin to align with other boards. Signed-off-by: Anish Trivedi <anish@freescale.com>
2010-11-04ENGR00133049 Support nand flash for MX28Frank Li
Support nand basic read/write in MX28 u-boot. Signed-off-by: Frank Li <frank.li@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com>
2010-10-22ENGR00132886 mx50-rdp: add mx50 rdp board mfg-tool firmware defconfigPeter Chen
Add mx50 rdp board mfg-tool firmware configration Signed-off-by: Peter Chen <peter.chen@freescale.com>
2010-10-19ENGR00132759 MX53: use 32K CLK as GPT sourceLily Zhang
MT29F16G08MAA NAND flash was failed on MX53 ARD/RevB board, but it's fine in RevA board. After check, it's found that udelay is not accurate on MX53 ARD/RevB board because GPT uses IPG peripheral clock and assume it is 50MHZ. However IPG peripheral clock is not 50MHZ in MX53 ARD/RevB board. So it causes udelay is not accurate. This patch changes GPT clk source as 32K to make udelay accurate. Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-10-19ENGR00132758 correct NFC_CLK definitionLily Zhang
This patch is used to fix the issue caused by ENGR00132709. NFC_CLK definition should be used in cmd_clk interface. MXC_NFC_CLK should be used as internal clock name. Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-10-17ENGR00132617 MX53: add NAND supportLily Zhang
Add NAND support for MX53 EVK and ARD. Need to use kobs-ng to flash U-Boot on MX53 TO1. Because MX51 TO1 ROM doesn't support bi swap solution and kernel enable bi swap, Must enable "ignore bad block" option when flashing U-Boot. The step is as following: echo 1 > /sys/devices/platform/mxc_nandv2_flash.0/ignorebad kobs-ng init --chip_0_device_path=/dev/mtd2 u-boot.bin echo 0 > /sys/devices/platform/mxc_nandv2_flash.0/ignorebad Since default configuration stores environment into SD card and U-Boot uses get_mmc_env_devno (Read SBMR register) to get MMC/SD slot information, you must insert SD card to bottom SD slot to get/store environment if you are using NAND boot on MX53 EVK. You must config boot dip setting well when doing NAND boot. For example, if you are using NAND 29F32G080AA NAND chip on MX53 EVK, you can set boot dips as the following for NAND boot: SW3: dip 7, 8 on; SW2: dip 3,5 on; SW1: dip 4,7,8 on. Other dips are off. Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-10-15ENGR00132656 MX53 ARD: Add MFG tool supportLily Zhang
Add default uboot defconfig for MX53 ARD MFG tool Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-10-15ENGR00132618 MX53 MFG:use serial_mxc as uart driverLily Zhang
Use serial_mxc as uart driver for MX53 MFG. This change is required by ENGR00131779. Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-09-26ENGR00131936 MX5X corrent mx53_evk mx51_BBG android default env settingZhang Jiejing
This change make a bootable default setting of MX53 EVK and MX51 BBG board, the old default setting is too old to boot android system up. Also add the recovery command in the env strings, if you want to boot to recovery mode with mx53_evk, you can just : > run bootcmd_android_recovery This command will boot android into recovery mode. Also fix MX51 can't see UI in recovery mode. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
2010-09-25ENGR00131924: using ext4 as default recovery filesystemZhang Jiejing
using ext4 as default recovery filesystem. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-22ENGR00131840 MX53 ARD:use serial_mxc as uart driverLily Zhang
Use serial_mxc as uart driver for MX53 ARD. This change is required by ENGR00131779. Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-09-21ENGR00131691 MX50 RDP UbootAnish Trivedi
Add support for building uboot for MX50 reference design platform: 1) LPDDR2 init script (v0.3 from Mike Kjar, dated 9/14) 2) iomux 3) new board file and machine id for RDP 4) Updates for iram boot on RDP Signed-off-by: Anish Trivedi <anish@freescale.com>
2010-09-21ENGR00131779: Use serial_mxc as uart driver for all platformsTerry Lv
Use serial_mxc as uart driver for all platforms. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-21ENGR00131792: Fix mx50 lpddr2 build errorsTerry Lv
Fix mx50 lpddr2 build errors. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-20ENGR00131705-3 Import new mach-type header fileLily Zhang
Import new mach-type header file Signed-off-by: Lily Zhang <r58066@freescale.com> Acked-by: Rob Herring
2010-09-20ENGR00131705-2 Add MX53 ARD supportLily Zhang
Add MX53 Automotive Reference Board (ARD) support 1. Add DDR2 initialization script 2. Add external ethernet support 3. Update PIN settings for UART, I2C, SDHC etc Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com>
2010-09-20ENGR00131662: Fix that iram boot don't workTerry Lv
iram boot don't work. The reason is that ivt plugins copy too much data than that iram can hold. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-20ENGR00131578: Add android recovery mode support for mx53Terry Lv
Add android recovery mode support for mx53. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-19ENGR00127167: Add gpmi nfc and apbh dma support for mx50.Terry Lv
Add gpmi nfc and apbh dma support for mx50. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-09-19ENGR00131712 UBOOT:add DDR2 support for IMX50Huang Shijie
add DDR2 support for U-BOOT. The infomation about the init script: Date : Aug-30,2010 Author : Tommy Version: 0.1 please check : http://compass.freescale.net/doc/219931536/Codex_DDR2_266MHz.inc.txt Signed-off-by: Huang Shijie <b32955@freescale.com>
2010-09-10ENGR00127368 UBOOT: Make the android recovery code common for platformsrel_imx_2.6.31_10.09.00Xinyu Chen
Move the android recovery codes into common/recovery.c. Cut the keypad detecting time. Now we only need detect there's POWER and HOME key pressing at the time scanning keyboard matrix. So user must hold these two keys when bootup to enter recovery mode. This can reduce the uboot boot time with recovery mode configured. Later /cache file checking for recovery command should be merged into the common/recovery.c Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
2010-08-27ENGR00126764 MX50: Set the memroy size to 512M on LPDDR2 boardJason Liu
Set the memroy size to 512M on LPDDR2 board Signed-off-by: Jason Liu <r64343@freescale.com>
2010-08-11ENGR00126079: Add clk command support for mx51Terry Lv
Add clk command support for mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-08-04ENGR00125237: Fix incorrect copyright info.Terry Lv
Fix incorrect copyright info. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-08-03ENGR00125324: Add splash screen code and support for epdcrel-imx-2.6.31-10.08.01rel-imx-2.6.31-10.08.00Terry Lv
Add splash screen code and support for epdc. Signed-off-by: Terry Lv <r65388@freescale.com>
2010-07-30ENGR00125757 mx28: change the boot mode offset to TO1.2 versionAisheng.Dong
The boot mode offset has been changed in TO1.2. Signed-off-by: Aisheng.Dong <b29396@freescale.com>
2010-07-30ENGR00125735 iMX28 read mac address from fuseFrank Li
Read mac address from fuse Signed-off-by: Frank Li <frank.li@freescale.com>
2010-07-27ENGR00125613 mfg-tool: Add mx50 mfg firmware supportPeter Chen
Add mx50 mfg firmware support Signed-off-by: Peter Chen <peter.chen@freescale.com>
2010-07-22ENGR00125220 MX28: SD(slot0)boot dhcp failedJason Liu
This is caused by fec_pwr_en pin is mis-used which lead to FEC not power on. This commit fix this issue. Signed-off-by:Jason Liu <r64343@freescale.com>
2010-07-20ENGR00125036 Uboot Add eMMC 4.4 supportAnish Trivedi
Enable DDR mode on ESDHC controller and mmc library Enable 8-bit support in mmc library Signed-off-by: Anish Trivedi <anish@freescale.com>