aboutsummaryrefslogtreecommitdiff
path: root/include/spd.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/spd.h')
-rw-r--r--include/spd.h78
1 files changed, 78 insertions, 0 deletions
diff --git a/include/spd.h b/include/spd.h
new file mode 100644
index 000000000..1ad4d801f
--- /dev/null
+++ b/include/spd.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Serial Presence Detect (SPD) EEPROM format according to the
+ * Intel's PC SDRAM Serial Presence Detect (SPD) Specification,
+ * revision 1.2B, November 1999
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPD_H_
+#define _SPD_H_
+
+typedef struct spd_eeprom_s {
+ unsigned char info_size; /* # of bytes written into serial memory */
+ unsigned char chip_size; /* Total # of bytes of SPD memory device */
+ unsigned char mem_type; /* Fundamental memory type (FPM, EDO, SDRAM...) */
+ unsigned char nrow_addr; /* # of Row Addresses on this assembly */
+ unsigned char ncol_addr; /* # of Column Addresses on this assembly */
+ unsigned char nrows; /* # of Module Rows on this assembly */
+ unsigned char dataw_lsb; /* Data Width of this assembly */
+ unsigned char dataw_msb; /* ... Data Width continuation */
+ unsigned char voltage; /* Voltage interface standard of this assembly */
+ unsigned char clk_cycle; /* SDRAM Cycle time at CL=X */
+ unsigned char clk_access; /* SDRAM Access from Clock at CL=X */
+ unsigned char config; /* DIMM Configuration type (non-parity, ECC) */
+ unsigned char refresh; /* Refresh Rate/Type */
+ unsigned char primw; /* Primary SDRAM Width */
+ unsigned char ecw; /* Error Checking SDRAM width */
+ unsigned char min_delay; /* Min Clock Delay for Back to Back Random Address */
+ unsigned char burstl; /* Burst Lengths Supported */
+ unsigned char nbanks; /* # of Banks on Each SDRAM Device */
+ unsigned char cas_lat; /* CAS# Latencies Supported */
+ unsigned char cs_lat; /* CS# Latency */
+ unsigned char write_lat; /* Write Latency (also called Write Recovery time) */
+ unsigned char mod_attr; /* SDRAM Module Attributes */
+ unsigned char dev_attr; /* SDRAM Device Attributes */
+ unsigned char clk_cycle2; /* Min SDRAM Cycle time at CL=X-1 */
+ unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1 */
+ unsigned char clk_cycle3; /* Min SDRAM Cycle time at CL=X-2 */
+ unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2 */
+ unsigned char trp; /* Min Row Precharge Time (tRP) */
+ unsigned char trrd; /* Min Row Active to Row Active (tRRD) */
+ unsigned char trcd; /* Min RAS to CAS Delay (tRCD) */
+ unsigned char tras; /* Minimum RAS Pulse Width (tRAS) */
+ unsigned char row_dens; /* Density of each row on module */
+ unsigned char ca_setup; /* Command and Address signal input setup time */
+ unsigned char ca_hold; /* Command and Address signal input hold time */
+ unsigned char data_setup; /* Data signal input setup time */
+ unsigned char data_hold; /* Data signal input hold time */
+ unsigned char sset[26]; /* Superset Information (may be used in future) */
+ unsigned char spd_rev; /* SPD Data Revision Code */
+ unsigned char cksum; /* Checksum for bytes 0-62 */
+ unsigned char mid[8]; /* Manufacturer's JEDEC ID code per JEP-108E */
+ unsigned char mloc; /* Manufacturing Location */
+ unsigned char mpart[18]; /* Manufacturer's Part Number */
+ unsigned char rev[2]; /* Revision Code */
+ unsigned char mdate[2]; /* Manufacturing Date */
+ unsigned char sernum[4]; /* Assembly Serial Number */
+ unsigned char mspec[27]; /* Manufacturer Specific Data */
+ unsigned char freq; /* Intel specification frequency */
+ unsigned char intel_cas; /* Intel Specification CAS# Latency support */
+} spd_eeprom_t;
+
+#endif /* _SPD_H_ */