aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/ebony/ebony.c6
-rw-r--r--board/emk/top860/Makefile40
-rw-r--r--board/emk/top860/flash.c490
-rw-r--r--board/emk/top860/top860.c187
-rw-r--r--board/emk/top860/u-boot.lds122
-rw-r--r--board/emk/top860/u-boot.lds.debug132
-rw-r--r--board/evb64260/evb64260.c4
-rw-r--r--board/evb64260/pci.c33
-rw-r--r--board/lubbock/config.mk9
-rw-r--r--board/lubbock/flash.c467
-rw-r--r--board/lubbock/lubbock.c6
-rw-r--r--board/lubbock/memsetup.S665
-rw-r--r--board/mpc8260ads/mpc8260ads.c262
-rw-r--r--board/mpc8266ads/Makefile46
-rw-r--r--board/mpc8266ads/config.mk32
-rw-r--r--board/mpc8266ads/flash.c509
-rw-r--r--board/mpc8266ads/mpc8266ads.c565
-rw-r--r--board/mpc8266ads/u-boot.lds117
-rw-r--r--board/w7o/init.S1
-rw-r--r--board/walnut405/walnut405.c11
20 files changed, 2915 insertions, 789 deletions
diff --git a/board/ebony/ebony.c b/board/ebony/ebony.c
index 723fad328..b36d54224 100644
--- a/board/ebony/ebony.c
+++ b/board/ebony/ebony.c
@@ -21,11 +21,10 @@
*/
-extern long int spd_sdram (void);
-
#include <common.h>
#include "ebony.h"
#include <asm/processor.h>
+#include <spd_sdram.h>
#define BOOT_SMALL_FLASH 32 /* 00100000 */
#define FLASH_ONBD_N 2 /* 00000010 */
@@ -113,10 +112,9 @@ int checkboard (void)
long int initdram (int board_type)
{
long dram_size = 0;
- extern long spd_sdram (void);
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram ();
+ dram_size = spd_sdram (0);
#else
dram_size = fixed_sdram ();
#endif
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
new file mode 100644
index 000000000..ef173d036
--- /dev/null
+++ b/board/emk/top860/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/emk/top860/flash.c b/board/emk/top860/flash.c
new file mode 100644
index 000000000..a9a977114
--- /dev/null
+++ b/board/emk/top860/flash.c
@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * copied from the BMW Port - seems that its similiar enough
+ * to be easily adaped ;) --- Well, it turned out to become a
+ * merger between parts of the EMKstax Flash routines and the
+ * BMW funtion frames...
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define FLASH_WORD_SIZE unsigned short
+#define FLASH_WORD_WIDTH (sizeof (FLASH_WORD_SIZE))
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+/*****************************************************************************
+ * software product ID entry/exit
+ *****************************************************************************/
+static void FlashProductIdMode (
+ volatile FLASH_WORD_SIZE *b,
+ int on_off)
+{
+ b[0x5555] = 0xaa;
+ b[0x2aaa] = 0x55;
+ b[0x5555] = on_off ? 0x90 : 0xf0;
+}
+
+/*****************************************************************************
+ * sector erase start
+ *****************************************************************************/
+static void FlashSectorErase (
+ volatile FLASH_WORD_SIZE *b,
+ volatile FLASH_WORD_SIZE *a)
+{
+ b[0x5555] = 0xaa;
+ b[0x2aaa] = 0x55;
+ b[0x5555] = 0x80;
+ b[0x5555] = 0xaa;
+ b[0x2aaa] = 0x55;
+ a[0] = 0x30;
+}
+
+/*****************************************************************************
+ * program a word
+ *****************************************************************************/
+static void FlashProgWord (
+ volatile FLASH_WORD_SIZE *b,
+ volatile FLASH_WORD_SIZE *a,
+ FLASH_WORD_SIZE v)
+{
+ b[0x5555] = 0xaa;
+ b[0x2aaa] = 0x55;
+ b[0x5555] = 0xa0;
+ a[0] = v;
+}
+
+/*****************************************************************************
+ * reset bank, back to read mode
+ *****************************************************************************/
+static void FlashReset (volatile FLASH_WORD_SIZE *b)
+{
+ b[0] = 0xf0;
+}
+
+/*****************************************************************************
+ * identify FLASH chip
+ * this code is a stripped version of the FlashGetType() function in EMKstax
+ *****************************************************************************/
+unsigned long flash_init (void)
+{
+ volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
+ FLASH_WORD_SIZE manu, dev;
+ flash_info_t * const pflinfo = &flash_info[0];
+ int j;
+
+ /* get Id Bytes */
+ FlashProductIdMode (flash, 1);
+ manu = flash[0];
+ dev = flash[1];
+ FlashProductIdMode (flash, 0);
+
+ pflinfo->size = 0;
+ pflinfo->sector_count = 0;
+ pflinfo->flash_id = 0xffffffff;
+ pflinfo->portwidth = FLASH_CFI_16BIT;
+ pflinfo->chipwidth = FLASH_CFI_BY16;
+
+ switch (manu&0xff)
+ {
+ case 0x01: /* AMD */
+ pflinfo->flash_id = FLASH_MAN_AMD;
+ switch (dev&0xff)
+ {
+ case 0x49:
+ pflinfo->size = 0x00200000;
+ pflinfo->sector_count = 35;
+ pflinfo->flash_id |= FLASH_AM160B;
+ pflinfo->start[0] = CFG_FLASH_BASE;
+ pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+ pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+ pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+ for (j = 4; j < 35; j++)
+ {
+ pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
+ }
+ break;
+
+ case 0xf9:
+ pflinfo->size = 0x00400000;
+ pflinfo->sector_count = 71;
+ pflinfo->flash_id |= FLASH_AM320B;
+ pflinfo->start[0] = CFG_FLASH_BASE;
+ pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+ pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+ pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+ for (j = 0; j < 8; j++)
+ {
+ pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
+ }
+ for (j = 8; j < 71; j++)
+ {
+ pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
+ }
+ break;
+
+ default:
+ printf ("unknown AMD dev=%x ", dev);
+ pflinfo->flash_id |= FLASH_UNKNOWN;
+ }
+ break;
+
+ default:
+ printf ("unknown manu=%x ", manu);
+ }
+ return pflinfo->size;
+}
+
+/*****************************************************************************
+ * print info about a FLASH
+ *****************************************************************************/
+void flash_print_info (flash_info_t *info)
+{
+ static const char unk[] = "Unknown";
+ unsigned int i;
+ const char *mfct=unk,
+ *type=unk;
+
+ if(info->flash_id != FLASH_UNKNOWN)
+ {
+ switch (info->flash_id & FLASH_VENDMASK)
+ {
+ case FLASH_MAN_AMD:
+ mfct = "AMD";
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM160B:
+ type = "AM29LV160B (16 Mbit, bottom boot sect)";
+ break;
+ case FLASH_AM320B:
+ type = "AM29LV320B (32 Mbit, bottom boot sect)";
+ break;
+ }
+ }
+
+ printf (
+ "\n Brand: %s Type: %s\n"
+ " Size: %lu KB in %d Sectors\n",
+ mfct,
+ type,
+ info->size >> 10,
+ info->sector_count
+ );
+
+ printf (" Sector Start Addresses:");
+
+ for (i = 0; i < info->sector_count; i++)
+ {
+ unsigned long size;
+ unsigned int erased;
+ unsigned long *flash = (unsigned long *) info->start[i];
+
+ /*
+ * Check if whole sector is erased
+ */
+ size =
+ (i != (info->sector_count - 1)) ?
+ (info->start[i + 1] - info->start[i]) >> 2 :
+ (info->start[0] + info->size - info->start[i]) >> 2;
+
+ for (
+ flash = (unsigned long *) info->start[i], erased = 1;
+ (flash != (unsigned long *) info->start[i] + size) && erased;
+ flash++
+ )
+ erased = *flash == ~0x0UL;
+
+ printf (
+ "%s %08lX %s %s",
+ (i % 5) ? "" : "\n ",
+ info->start[i],
+ erased ? "E" : " ",
+ info->protect[i] ? "RO" : " "
+ );
+ }
+
+ puts ("\n");
+ return;
+}
+
+/*****************************************************************************
+ * erase one or more sectors
+ *****************************************************************************/
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ int flag,
+ prot,
+ sect,
+ l_sect;
+ ulong start,
+ now,
+ last;
+
+ if ((s_first < 0) || (s_first > s_last))
+ {
+ if (info->flash_id == FLASH_UNKNOWN)
+ {
+ printf ("- missing\n");
+ }
+ else
+ {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
+ {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect)
+ {
+ if (info->protect[sect])
+ {
+ prot++;
+ }
+ }
+
+ if (prot)
+ {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ }
+ else
+ {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++)
+ {
+ if (info->protect[sect] == 0)
+ { /* not protected */
+ FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (FLASH_WORD_SIZE *)info->start[l_sect];
+ while ((addr[0] & 0x0080) != 0x0080)
+ {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
+ {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000)
+ { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
+
+ printf (" done\n");
+ return 0;
+}
+
+/*****************************************************************************
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp,
+ wp,
+ data;
+ int i,
+ l,
+ rc;
+
+ wp = (addr & ~(FLASH_WORD_WIDTH-1)); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes, if there are...
+ */
+ if ((l = addr - wp) != 0)
+ {
+ data = 0;
+
+ /* get the current before the new data into our data word */
+ for (i=0, cp=wp; i<l; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ /* now merge the to be programmed values */
+ for (; i<4 && cnt>0; ++i, ++cp, --cnt)
+ {
+ data = (data << 8) | *src++;
+ }
+
+ /* get the current after the new data into our data word */
+ for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ /* now write the combined word */
+ if ((rc = write_word (info, wp, data)) != 0)
+ {
+ return (rc);
+ }
+ wp += FLASH_WORD_WIDTH;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= FLASH_WORD_WIDTH)
+ {
+ data = 0;
+ for (i=0; i<FLASH_WORD_WIDTH; ++i)
+ {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word (info, wp, data)) != 0)
+ {
+ return (rc);
+ }
+ wp += FLASH_WORD_WIDTH;
+ cnt -= FLASH_WORD_WIDTH;
+ }
+
+ if (cnt == 0)
+ {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes, if there are...
+ */
+ data = 0;
+
+ /* now merge the to be programmed values */
+ for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
+ {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+
+ /* get the current after the new data into our data word */
+ for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ /* now write the combined word */
+ return (write_word (info, wp, data));
+}
+
+/*****************************************************************************
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+ FLASH_WORD_SIZE data2 = data;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & data2) != data2)
+ {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ FlashProgWord (addr2, dest2, data2);
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*dest2 & 0x0080) != (data2 & 0x0080))
+ {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+ {
+ return (1);
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
new file mode 100644
index 000000000..b99bf0e92
--- /dev/null
+++ b/board/emk/top860/top860.c
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Board specific routines for the TOP860
+ *
+ * - initialisation
+ * - interface to VPD data (mac address, clock speeds)
+ * - memory controller
+ * - serial io initialisation
+ * - ethernet io initialisation
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+
+/*****************************************************************************
+ * UPM table for 60ns EDO RAM at 25 MHz bus/external clock
+ *****************************************************************************/
+static const uint edo_60ns_25MHz_tbl[] = {
+
+/* single read (offset 0x00 in upm ram) */
+ 0x0ff3fc04,0x08f3fc04,0x00f3fc04,0x00f3fc00,
+ 0x33f7fc07,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst read (offset 0x08 in upm ram) */
+ 0x0ff3fc04,0x08f3fc04,0x00f3fc0c,0x0ff3fc40,
+ 0x0cf3fc04,0x03f3fc48,0x0cf3fc04,0x03f3fc48,
+ 0x0cf3fc04,0x03f3fc00,0x3ff7fc07,0xfffffc05,
+ 0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* single write (offset 0x18 in upm ram) */
+ 0x0ffffc04,0x08fffc04,0x30fffc00,0xf1fffc07,
+ 0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst write (offset 0x20 in upm ram) */
+ 0x0ffffc04,0x08fffc00,0x00fffc04,0x03fffc4c,
+ 0x00fffc00,0x07fffc4c,0x00fffc00,0x0ffffc4c,
+ 0x00fffc00,0x3ffffc07,0xfffffc05,0xfffffc05,
+ 0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* refresh (offset 0x30 in upm ram) */
+ 0xc0fffc04,0x07fffc04,0x0ffffc04,0x0ffffc04,
+ 0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+ 0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* exception (offset 0x3C in upm ram) */
+ 0xfffffc07,0xfffffc03,0xfffffc05,0xfffffc05,
+};
+
+/*****************************************************************************
+ * Print Board Identity
+ *****************************************************************************/
+int checkboard (void)
+{
+ puts ("Board:"CONFIG_IDENT_STRING"\n");
+ return (0);
+}
+
+/*****************************************************************************
+ * Initialize DRAM controller
+ *****************************************************************************/
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ /*
+ * Only initialize memory controller when running from FLASH.
+ * When running from RAM, don't touch it.
+ */
+ if ((ulong) initdram & 0xff000000)
+ {
+ volatile uint *addr1, *addr2;
+ uint i, j;
+
+ upmconfig (UPMA, (uint *) edo_60ns_25MHz_tbl,
+ sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
+ memctl->memc_mptpr = 0x0200;
+ memctl->memc_mamr = 0x0ca20330;
+ memctl->memc_or2 = -CFG_DRAM_MAX | OR_CSNT_SAM;
+ memctl->memc_br2 = CFG_DRAM_BASE | BR_MS_UPMA | BR_V;
+ /*
+ * Do 8 read accesses to DRAM
+ */
+ addr1 = (volatile uint*) 0;
+ addr2 = (volatile uint*) 0x00400000;
+ for (i=0, j=0; i<8; i++)
+ j = addr1[0];
+
+ /*
+ * Now check whether we got 4MB or 16MB populated
+ */
+ addr1[0] = 0x12345678;
+ addr1[1] = 0x9abcdef0;
+ addr2[0] = 0xfeedc0de;
+ addr2[1] = 0x47110815;
+ if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815)
+ {
+ /* only 4MB populated */
+ memctl->memc_or2 = -(CFG_DRAM_MAX/4) | OR_CSNT_SAM;
+ }
+ }
+
+ return -(memctl->memc_or2 & 0xffff0000);
+}
+
+/*****************************************************************************
+ * otherinits after RAM is there and we are relocated to RAM
+ * note: though this is an int function, nobody cares for the result!
+ *****************************************************************************/
+int misc_init_r (void)
+{
+ /* read 'factory' part of EEPROM */
+ uchar buf[81];
+ uchar *p;
+ uint length;
+ uint addr;
+ uint len;
+
+ /* get length first */
+ addr = CFG_FACT_OFFSET;
+ if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2))
+ {
+bailout:
+ printf ("cannot read factory configuration\n");
+ printf ("be sure to set ethaddr yourself!\n");
+ return 0;
+ }
+ length = buf[0] + (buf[1]<<8);
+ addr += 2;
+
+ /* sanity check */
+ if (length < 20 || length > CFG_FACT_SIZE-2)
+ goto bailout;
+
+ /* read lines */
+ while (length > 0)
+ {
+ /* read one line */
+ len = length > 80 ? 80 : length;
+ if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
+ goto bailout;
+ /* mark end of buffer */
+ buf[len] = 0;
+ /* search end of line */
+ for (p=buf; *p && *p != 0x0a; p++) ;
+ if (!*p)
+ goto bailout;
+ *p++ = 0;
+ /* advance to next line start */
+ length -= p-buf;
+ addr += p-buf;
+ /*printf ("%s\n", buf);*/
+ /* search for our specific entry */
+ if (!strncmp ((char *)buf, "[RLA/lan/Ethernet] ", 19))
+ {
+ setenv ("ethaddr", buf+19);
+ }
+ else if (!strncmp ((char *)buf, "[BOARD/SERIAL] ", 15))
+ {
+ setenv ("serial#", buf+15);
+ }
+ else if (!strncmp ((char *)buf, "[BOARD/TYPE] ", 13))
+ {
+ setenv ("board_id", buf+13);
+ }
+ }
+ return (0);
+}
+
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
new file mode 100644
index 000000000..d647be362
--- /dev/null
+++ b/board/emk/top860/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
new file mode 100644
index 000000000..bd13b7b96
--- /dev/null
+++ b/board/emk/top860/u-boot.lds.debug
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+
+ . = env_offset;
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c
index 1c02e321f..02431dab5 100644
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -315,8 +315,10 @@ int misc_init_r (void)
}
void
-after_reloc(gd_t *gd, ulong dest_addr)
+after_reloc(ulong dest_addr)
{
+ DECLARE_GLOBAL_DATA_PTR;
+
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
diff --git a/board/evb64260/pci.c b/board/evb64260/pci.c
index 585906d31..5f3b154d5 100644
--- a/board/evb64260/pci.c
+++ b/board/evb64260/pci.c
@@ -52,6 +52,7 @@ static const unsigned int pci_scs_bank_size[2][4] = {
static const unsigned int pci_p2p_configuration[] = {
PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
+static unsigned int local_buses[] = { 0, 0};
/********************************************************************
* pciWriteConfigReg - Write to a PCI configuration register
* - Make sure the GT is configured as a master before writing
@@ -74,7 +75,7 @@ void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,unsigned int pciDev
{
volatile unsigned int DataForAddrReg;
unsigned int functionNum;
- unsigned int busNum = 0;
+ unsigned int busNum = PCI_BUS(pciDevNum);
unsigned int addr;
if(pciDevNum > 32) /* illegal device Number */
@@ -117,7 +118,7 @@ unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,unsigned in
volatile unsigned int DataForAddrReg;
unsigned int data;
unsigned int functionNum;
- unsigned int busNum = 0;
+ unsigned int busNum = PCI_BUS(pciDevNum);
if(pciDevNum > 32) /* illegal device Number */
return 0xffffffff;
@@ -531,16 +532,32 @@ static int gt_read_config_dword(struct pci_controller *hose,
pci_dev_t dev,
int offset, u32* value)
{
- *value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset, PCI_DEV(dev));
- return 0;
+ int bus = PCI_BUS(dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])){
+ *value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV(dev));
+ } else {
+ *value = pciOverBridgeReadConfigReg((PCI_HOST) hose->cfg_addr,
+ offset, PCI_DEV(dev), bus);
+ }
+ return 0;
}
static int gt_write_config_dword(struct pci_controller *hose,
pci_dev_t dev,
int offset, u32 value)
{
- pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset, PCI_DEV(dev), value);
- return 0;
+ int bus = PCI_BUS(dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])){
+ pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
+ PCI_DEV(dev), value);
+ } else {
+ pciOverBridgeWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
+ PCI_DEV(dev), value, bus);
+ }
+ return 0;
}
/*
@@ -603,7 +620,7 @@ pci_init_board(void)
pci0_hose.first_busno = 0;
pci0_hose.last_busno = 0xff;
-
+ local_buses[0] = pci0_hose.first_busno;
/* PCI memory space */
pci_set_region(pci0_hose.regions + 0,
CFG_PCI0_0_MEM_SPACE,
@@ -647,6 +664,8 @@ pci_init_board(void)
pci1_hose.first_busno = pci0_hose.last_busno + 1;
pci1_hose.last_busno = 0xff;
+ pci1_hose.current_busno = pci0_hose.current_busno;
+ local_buses[1] = pci1_hose.first_busno;
/* PCI memory space */
pci_set_region(pci1_hose.regions + 0,
diff --git a/board/lubbock/config.mk b/board/lubbock/config.mk
index d6ec08cf1..0ffe1ba63 100644
--- a/board/lubbock/config.mk
+++ b/board/lubbock/config.mk
@@ -1,12 +1,3 @@
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c170'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-
#TEXT_BASE = 0xa1700000
TEXT_BASE = 0xa3000000
#TEXT_BASE = 0
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index 84c09a853..a93875083 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -1,10 +1,9 @@
/*
- * (C) Copyright 2002
+ * (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -26,46 +25,62 @@
*/
#include <common.h>
+#include <linux/byteorder/swab.h>
-#define FLASH_BANK_SIZE 0x2000000
-#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
/*-----------------------------------------------------------------------
+ * Functions
*/
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel(void);
-ulong flash_init(void)
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
{
- int i, j;
+ int i;
ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
{
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
switch (i)
{
case 0:
- flashbase = PHYS_FLASH_1;
+ flash_get_size((FPW *)PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
break;
case 1:
- flashbase = PHYS_FLASH_2;
+ flash_get_size((FPW *)PHYS_FLASH_2, &flash_info[i]);
+ flash_get_offsets(PHYS_FLASH_2, &flash_info[i]);
break;
default:
panic("configured to many flash banks!\n");
break;
}
- for (j = 0; j < flash_info[i].sector_count; j++)
- {
- flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
- }
size += flash_info[i].size;
}
@@ -86,71 +101,140 @@ ulong flash_init(void)
/*-----------------------------------------------------------------------
*/
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
void flash_print_info (flash_info_t *info)
{
- int i, j;
+ int i;
- for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
- {
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
}
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- goto Done;
- break;
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n"); break;
+ default: printf ("Unknown Chip Type\n"); break;
}
- printf(" Size: %ld MB in %d Sectors\n",
+ printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
- {
printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
}
printf ("\n");
- info++;
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW)0x00AA00AA;
+ addr[0x2AAA] = (FPW)0x00550055;
+ addr[0x5555] = (FPW)0x00900090;
+
+ mb();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW)0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb();
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (FPW)INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
}
-Done:
+ addr[0] = (FPW)0x00FF00FF; /* restore read mode */
+
+ return (info->size);
}
+
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
+ ulong type, start, now, last;
+ int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
}
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
}
prot = 0;
@@ -159,153 +243,79 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
prot++;
}
}
- if (prot)
- return ERR_PROTECTED;
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+
+ /* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *)(info->start[sect]);
+ FPW status;
printf("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *)(info->start[sect]);
+ *addr = (FPW)0x00500050; /* clear status register */
+ *addr = (FPW)0x00200020; /* erase setup */
+ *addr = (FPW)0x00D000D0; /* erase confirm */
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while ((*addr & 0x80) != 0x80) {
+ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- /* clear status register command */
- *addr = 0x50;
- /* reset to read mode */
- *addr = 0xFF;
+ printf ("Timeout\n");
+ *addr = (FPW)0x00B000B0; /* suspend erase */
+ *addr = (FPW)0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
}
- printf("ok.\n");
}
- if (ctrlc())
- printf("User Interrupt!\n");
-outahere:
+ *addr = 0x00500050; /* clear status register cmd. */
+ *addr = 0x00FF00FF; /* resest to read mode */
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
-
- if (flag)
- enable_interrupts();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t *info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *)dest, val;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((*addr & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
-
- /* clear status register command */
- *addr = 0x50;
-
- /* program set-up command */
- *addr = 0x40;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait while polling the status register */
- while(((val = *addr) & 0x80) != 0x80)
- {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0xB0;
- goto outahere;
- }
- }
-
- if(val & 0x1A) { /* check for error */
- printf("\nFlash write error %02x at address %08lx\n",
- (int)val, (unsigned long)dest);
- if(val & (1<<3)) {
- printf("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
+ printf (" done\n");
}
- if(val & (1<<1)) {
- printf("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
}
- if(val & (1<<4)) {
- printf("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
-outahere:
- /* read array command */
- *addr = 0xFF;
-
- if (flag)
- enable_interrupts();
-
- return rc;
+ return rcode;
}
/*-----------------------------------------------------------------------
- * Copy memory to flash.
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
+ FPW data;
+ int count, i, l, rc, port_width;
- wp = (addr & ~1); /* get lower word aligned address */
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
/*
* handle unaligned start bytes
@@ -313,51 +323,110 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ data = (data << 8) | (*(uchar *)cp);
}
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
+ for (; i<port_width && cnt>0; ++i) {
+ data = (data << 8) | *src++;
--cnt;
++cp;
}
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; cnt==0 && i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_data(info, wp, SWAP(data))) != 0) {
return (rc);
}
- wp += 2;
+ wp += port_width;
}
/*
* handle word aligned part
*/
- while (cnt >= 2) {
- data = *((vu_short*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i=0; i<port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data(info, wp, SWAP(data))) != 0) {
return (rc);
}
- src += 2;
- wp += 2;
- cnt -= 2;
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800)
+ {
+ spin_wheel();
+ count = 0;
+ }
}
if (cnt == 0) {
- return ERR_OK;
+ return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
+ for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
--cnt;
}
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_data(info, wp, SWAP(data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *)dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW)0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
+ if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW)0x00FF00FF; /* restore read mode */
+ return (1);
+ }
}
- return write_word(info, wp, data);
+ *addr = (FPW)0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+void inline
+spin_wheel(void)
+{
+ static int r=0,p=0;
+ static char w[] = "\\/-";
+
+ printf("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
}
+
diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c
index ba9b86b31..2487a4cba 100644
--- a/board/lubbock/lubbock.c
+++ b/board/lubbock/lubbock.c
@@ -47,7 +47,7 @@ int board_init (void)
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
- return 1;
+ return 0;
}
int dram_init (void)
@@ -62,6 +62,6 @@ int dram_init (void)
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
- return PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE + PHYS_SDRAM_3_SIZE +
- PHYS_SDRAM_4_SIZE;
+
+ return 0;
}
diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S
index c0278340a..5bbd85958 100644
--- a/board/lubbock/memsetup.S
+++ b/board/lubbock/memsetup.S
@@ -39,12 +39,16 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
.endm
+/*
+ * Memory setup
+ */
+
.globl memsetup
memsetup:
mov r10, lr
- /* Set up GPIO pins first */
+ /* Set up GPIO pins first ----------------------------------------- */
ldr r0, =GPSR0
ldr r1, =CFG_GPSR0_VAL
@@ -106,562 +110,284 @@ memsetup:
ldr r1, =CFG_GAFR2_U_VAL
str r1, [r0]
- /* enable GPIO pins */
- ldr r0, =PSSR
+ ldr r0, =PSSR /* enable GPIO pins */
ldr r1, =CFG_PSSR_VAL
str r1, [r0]
- ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */
- ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */
- str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */
- ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */
-
- ldr r1, =LED_BLANK
- mov r0, #0xFF
- str r0, [r1] /* turn on hex leds */
-
-loop:
- ldr r0, =0xB0070001
- ldr r1, =_LED
- str r0, [r1] /* hex display */
-
-/*********************************************************************
- Initlialize Memory Controller
- The sequence below is based on the recommended init steps detailed
- in the EAS, chapter 5 (Chapter 10, Operating Systems Developers Guide)
-
-
- pause for 200 uSecs- allow internal clocks to settle
- *Note: only need this if hard reset... doing it anyway for now
-*/
-
- @ ---- Wait 200 usec
- ldr r3, =OSCR @ reset the OS Timer Count to zero
+ /* ---------------------------------------------------------------- */
+ /* Enable memory interface */
+ /* */
+ /* The sequence below is based on the recommended init steps */
+ /* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+ /* Chapter 10. */
+ /* ---------------------------------------------------------------- */
+
+ /* ---------------------------------------------------------------- */
+ /* Step 1: Wait for at least 200 microsedonds to allow internal */
+ /* clocks to settle. Only necessary after hard reset... */
+ /* FIXME: can be optimized later */
+ /* ---------------------------------------------------------------- */
+
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
mov r2, #0
str r2, [r3]
- ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ /* so 0x300 should be plenty */
1:
ldr r2, [r3]
cmp r4, r2
bgt 1b
mem_init:
- @ get memory controller base address
- ldr r1, =MEMC_BASE
-@****************************************************************************
-@ Step 1
-@
+ ldr r1, =MEMC_BASE /* get memory controller base addr. */
- @ write msc0, read back to ensure data latches
- @
+ /* ---------------------------------------------------------------- */
+ /* Step 2a: Initialize Asynchronous static memory controller */
+ /* ---------------------------------------------------------------- */
+
+ /* MSC registers: timing, bus width, mem type */
+
+ /* MSC0: nCS(0,1) */
ldr r2, =CFG_MSC0_VAL
str r2, [r1, #MSC0_OFFSET]
- ldr r2, [r1, #MSC0_OFFSET]
-
- @ write msc1
+ ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
+ /* that data latches */
+ /* MSC1: nCS(2,3) */
ldr r2, =CFG_MSC1_VAL
str r2, [r1, #MSC1_OFFSET]
ldr r2, [r1, #MSC1_OFFSET]
- @ write msc2
+ /* MSC2: nCS(4,5) */
ldr r2, =CFG_MSC2_VAL
str r2, [r1, #MSC2_OFFSET]
ldr r2, [r1, #MSC2_OFFSET]
- @ write mecr
+ /* ---------------------------------------------------------------- */
+ /* Step 2b: Initialize Card Interface */
+ /* ---------------------------------------------------------------- */
+
+ /* MECR: Memory Expansion Card Register */
ldr r2, =CFG_MECR_VAL
str r2, [r1, #MECR_OFFSET]
+ ldr r2, [r1, #MECR_OFFSET]
- @ write mcmem0
+ /* MCMEM0: Card Interface slot 0 timing */
ldr r2, =CFG_MCMEM0_VAL
str r2, [r1, #MCMEM0_OFFSET]
+ ldr r2, [r1, #MCMEM0_OFFSET]
- @ write mcmem1
+ /* MCMEM1: Card Interface slot 1 timing */
ldr r2, =CFG_MCMEM1_VAL
str r2, [r1, #MCMEM1_OFFSET]
+ ldr r2, [r1, #MCMEM1_OFFSET]
- @ write mcatt0
+ /* MCATT0: Card Interface Attribute Space Timing, slot 0 */
ldr r2, =CFG_MCATT0_VAL
str r2, [r1, #MCATT0_OFFSET]
+ ldr r2, [r1, #MCATT0_OFFSET]
- @ write mcatt1
+ /* MCATT1: Card Interface Attribute Space Timing, slot 1 */
ldr r2, =CFG_MCATT1_VAL
str r2, [r1, #MCATT1_OFFSET]
+ ldr r2, [r1, #MCATT1_OFFSET]
- @ write mcio0
+ /* MCIO0: Card Interface I/O Space Timing, slot 0 */
ldr r2, =CFG_MCIO0_VAL
str r2, [r1, #MCIO0_OFFSET]
+ ldr r2, [r1, #MCIO0_OFFSET]
- @ write mcio1
+ /* MCIO1: Card Interface I/O Space Timing, slot 1 */
ldr r2, =CFG_MCIO1_VAL
str r2, [r1, #MCIO1_OFFSET]
+ ldr r2, [r1, #MCIO1_OFFSET]
- @-------------------------------------------------------
- @ 3rd bullet, Step 1
- @
+ /* ---------------------------------------------------------------- */
+ /* Step 2c: Write FLYCNFG FIXME: what's that??? */
+ /* ---------------------------------------------------------------- */
- @ get the mdrefr settings
- ldr r3, =CFG_MDREFR_VAL_100
- @ extract DRI field (we need a valid DRI field)
- @
- ldr r2, =0xFFF
+ /* ---------------------------------------------------------------- */
+ /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
+ /* ---------------------------------------------------------------- */
- @ valid DRI field in r3
- @
- and r3, r3, r2
+ /* Before accessing MDREFR we need a valid DRI field, so we set */
+ /* this to power on defaults + DRI field. */
- @ get the reset state of MDREFR
- @
+ ldr r3, =CFG_MDREFR_VAL
+ ldr r2, =0xFFF
+ and r3, r3, r2
+ ldr r4, =0x03ca4000
+ orr r4, r4, r3
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r4, [r1, #MDREFR_OFFSET]
- @ clear the DRI field
- @
- bic r4, r4, r2
-
- @ insert the valid DRI field loaded above
- @
- orr r4, r4, r3
-
- @ write back mdrefr
- @
- str r4, [r1, #MDREFR_OFFSET]
-
- @ *Note: preserve the mdrefr value in r4 *
-
-@****************************************************************************
-@ Step 2
-@
- /* This should be for SRAM, why is it commented out??? */
-
- @ fetch sxcnfg value
- @
- @ldr r2, =0
- @ write back sxcnfg
- @str r2, [r1, #SXCNFG_OFFSET]
-
-/* @if sxcnfg=0, don't program for synch-static memory */
- @cmp r2, #0
- @beq 1f
-
- @program sxmrs
- @ldr r2, =SXMRS_SETTINGS
- @str r2, [r1, #SXMRS_OFFSET]
-
-
-@****************************************************************************
-@ Step 3
-@
-
- @ Assumes previous mdrefr value in r4, if not then read current mdrefr
-
- @ clear the free-running clock bits
- @ (clear K0Free, K1Free, K2Free
- @
- bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000)
-
- @ set K1RUN if bank 0 installed
- @
- orr r4, r4, #0x00010000
-
-
-
-#ifdef THIS
-@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-@<!<!<!<!<!<!<!<!<!<!<! Begin INSERT 1 <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- @ Lubbock: Allow the user to select the {T/R/M} with predetermined
- @ SDCLK. Based on Table 3-1 in PXA250 and PXA210 Dev Man.
- @
- @ * = Must set MDREFR.K1DB2 to halve the MemClk for desired SDCLK[1]
- @
- @ S25, S26 used to provide all 400 MHz BIN values for Cotulla (0,0 - 1,3)
- @ S25, S26 used to provide all 200 MHz BIN values for Sabinal
- @
- @ S23: Force the halving of MemClk when deriving SDCLK[1]
- @ DOT: no override !DOT: halve (if not already forced half)
-/* @ *For certain MemClks, SDCLK's derivation is forced to be halved */
- @
- @ S24: Run/Turbo.
- @ DOT: Run mode !DOT: Turbo mode
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
- @
- @ Allow the user to control K1DB2 where applicable
- @
- @ Get the value of S23: @ 1 = DOT (unity), 0 = !DOT (halve it)
- @
- @ DOT: set K1DB2 (SDCLD = MemClk)
- @ !DOT: clear K1DB2 (SDCLK = MemClk/2)
- @
- @ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
- bl GET_S23 @ r3, r2 @ get the value of S23 in R0, i put the base adx of fpga in r3
-
- cmp r3, #0x0 @ is !DOT?
- orreq r4, r4, #0x00020000 @ SDClk[1] = MemClk/2
- bicne r4, r4, #0x00020000 @ SDClk[1] = MemClk
-
- @
- @ Next, we need to look for S25,S26 selections that necessitate the
- @ halving of MemClk to derive SDCLK[1]: (S25,S26)={03-0C, 10-13}
- @ Override above S23-based selection accordingly.
- @
- ldr r2, =FPGA_REGS_BASE_PHYSICAL
- bl GET_S25 @ r0, r2
- @ get the value of S25 in R0, i put the base adx of fpga in r2
-
-
-
- ldr r2, =FPGA_REGS_BASE_PHYSICAL
- BL GET_S26 @ r3, r2
- @ get the value of S26 in R1, i put the base adx of fpga in r2
-
- orr r0, r0, r3 @ concatenate S25 & S26 vals
- and r0, r0, #0xFF
-
- @ Set K1DB2 for the frequencies that require it
- @
- cmp r0, #0x03
- cmpne r0, #0x04
- cmpne r0, #0x05
- cmpne r0, #0x06
- cmpne r0, #0x07
- cmpne r0, #0x08
- cmpne r0, #0x09
- cmpne r0, #0x0A
- cmpne r0, #0x0B
- cmpne r0, #0x0C
- cmpne r0, #0x10
- cmpne r0, #0x11
- cmpne r0, #0x12
- cmpne r0, #0x13
- orreq r4, r4, #0x00020000 @ SDCLK[1] = (MemClk)/2 for 03 - 0C @ 10 - 13
-
- @
- @ *Must make MSC0&1 adjustments now for MEMClks > 100MHz.
- @
- @ Adjust MSC0 for MemClks > 100 MHz
- @
- ldreq r0, [r1, #MSC0_OFFSET]
- ldreq r3, =0x7F007F00
- biceq r0, r0, r3 @ clear MSC0[14:12, 11:8] (RRR, RDN)
- ldreq r3, =0x46004600
- orreq r0, r0, r3 @ set MSC0[14, 10:9] (doubling RRR, RDN)
- streq r0, [r1, #MSC0_OFFSET]
- ldreq r0, [r1, #MSC0_OFFSET] @ read it back to ensure that the data latches
-
- @
- @ Adjust MSC1.LH for MemClks > 100 MHz
- @
- ldreq r0, [r1, #MSC1_OFFSET]
- ldreq r3, =0x7FF0
- biceq r0, r0, r3 @ clear MSC1[14:12, 11:8, 7:4] (RRR, RDN, RDF)
- ldreq r3, =0x4880
- orreq r0, r0, r3 @ set MSC1[14, 11, 7] (doubling RRR, RDN, RDF)
- streq r0, [r1, #MSC1_OFFSET]
- ldreq r0, [r1, #MSC1_OFFSET] @ read it back to ensure that the data latches
-
- @ @
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-#endif
+ /* Note: preserve the mdrefr value in r4 */
-@<!<!<!<!<!<!<!<!<!<!<! End INSERT 1 <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
-@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+ /* ---------------------------------------------------------------- */
+ /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+ /* ---------------------------------------------------------------- */
- @ write back mdrefr
- @
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
+ /* Initialize SXCNFG register. Assert the enable bits */
- @ deassert SLFRSH
- @
- bic r4, r4, #0x00400000
+ /* Write SXMRS to cause an MRS command to all enabled banks of */
+ /* synchronous static memory. Note that SXLCR need not be written */
+ /* at this time. */
- @ write back mdrefr
- @
- str r4, [r1, #MDREFR_OFFSET]
+ /* FIXME: we use async mode for now */
- @ assert E1PIN
- @
- orr r4, r4, #0x00008000
- @ write back mdrefr
- @
- str r4, [r1, #MDREFR_OFFSET]
+ /* ---------------------------------------------------------------- */
+ /* Step 4: Initialize SDRAM */
+ /* ---------------------------------------------------------------- */
+
+ /* set MDREFR according to user define with exception of a few bits */
+
+ ldr r4, =CFG_MDREFR_VAL
+ orr r4, r4, #(MDREFR_SLFRSH)
+ bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN)
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r4, [r1, #MDREFR_OFFSET]
- nop
- nop
+ /* Step 4b: de-assert MDREFR:SLFRSH. */
-@****************************************************************************
-@ Step 4
-@
+ bic r4, r4, #(MDREFR_SLFRSH)
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
- @ fetch platform value of mdcnfg
- @
- ldr r2, =CFG_MDCNFG_VAL
- @ disable all sdram banks
- @
- bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1)
- bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3)
+ /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */
- @ program banks 0/1 for bus width
- @
- bic r2, r2, #MDCNFG_DWID0 @0=32-bit
+ ldr r4, =CFG_MDREFR_VAL
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
- @ write initial value of mdcnfg, w/o enabling sdram banks
- @
- str r2, [r1, #MDCNFG_OFFSET]
+ /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
+ /* configure but not enable each SDRAM partition pair. */
-@ ****************************************************************************
-@ Step 5
-@
+ ldr r4, =CFG_MDCNFG_VAL
+ bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
- @ pause for 200 uSecs
- @
- ldr r3, =OSCR @reset the OS Timer Count to zero
+ str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
+ ldr r4, [r1, #MDCNFG_OFFSET]
+
+
+ /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
+ /* 100..200 µsec. */
+
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
mov r2, #0
str r2, [r3]
- ldr r4, =0x300 @really 0x2E1 is about 200usec, so 0x300 should be plenty
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ /* so 0x300 should be plenty */
1:
ldr r2, [r3]
cmp r4, r2
bgt 1b
-@****************************************************************************
-@ Step 6
-@
-
- mov r0, #0x78 @turn everything off
- mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.)
-
+ /* Step 4f: Trigger a number (usually 8) refresh cycles by */
+ /* attempting non-burst read or write accesses to disabled */
+ /* SDRAM, as commonly specified in the power up sequence */
+ /* documented in SDRAM data sheets. The address(es) used */
+ /* for this purpose must not be cacheable. */
-@ ****************************************************************************
-@ Step 7
-@
- @ Access memory *not yet enabled* for CBR refresh cycles (8)
- @ - CBR is generated for all banks
+ ldr r3, =CFG_DRAM_BASE
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
- ldr r2, =CFG_DRAM_BASE
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
+ /* Step 4g: Write MDCNFG with enable bits asserted */
+ /* (MDCNFG:DEx set to 1). */
-@ ****************************************************************************
-@ Step 8: NOP (enable dcache if you wanna... we dont)
-@
-
-
-@ ****************************************************************************
-@ Step 9
-@
-
-
- @get memory controller base address
- @
- ldr r1, =MEMC_BASE
-
- @fetch current mdcnfg value
- @
ldr r3, [r1, #MDCNFG_OFFSET]
-
- @enable sdram bank 0 if installed (must do for any populated bank)
- @
- orr r3, r3, #MDCNFG_DE0
-
- @write back mdcnfg, enabling the sdram bank(s)
- @
+ orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1)
str r3, [r1, #MDCNFG_OFFSET]
+ /* Step 4h: Write MDMRS. */
-@****************************************************************************
-@ Step 10
-@
-
- @ write mdmrs
- @
ldr r2, =CFG_MDMRS_VAL
str r2, [r1, #MDMRS_OFFSET]
-@****************************************************************************
-@ Step 11: Final Step
-@
+ /* We are finished with Intel's memory controller initialisation */
+
-@INITINTC
- @********************************************************************
- @ Disable (mask) all interrupts at the interrupt controller
- @
+ /* ---------------------------------------------------------------- */
+ /* Disable (mask) all interrupts at interrupt controller */
+ /* ---------------------------------------------------------------- */
- @ clear the interrupt level register (use IRQ, not FIQ)
- @
- mov r1, #0
+initirqs:
+
+ mov r1, #0 /* clear int. level register (IRQ, not FIQ) */
ldr r2, =ICLR
str r1, [r2]
- @ mask all interrupts at the controller
- @
- ldr r2, =ICMR
+ ldr r2, =ICMR /* mask all interrupts at the controller */
str r1, [r2]
-@INITCLKS
- @ ********************************************************************
- @ Disable the peripheral clocks, and set the core clock
- @ frequency (hard-coding at 398.12MHz for now).
- @
+ /* ---------------------------------------------------------------- */
+ /* Clock initialisation */
+ /* ---------------------------------------------------------------- */
+
+initclks:
+
+ /* Disable the peripheral clocks, and set the core clock frequency */
+ /* (hard-coding at 398.12MHz for now). */
- @ Turn Off ALL on-chip peripheral clocks for re-configuration
- @ *Note: See label 'ENABLECLKS' for the re-enabling
- @
+ /* Turn Off ALL on-chip peripheral clocks for re-configuration */
+ /* Note: See label 'ENABLECLKS' for the re-enabling */
ldr r1, =CKEN
mov r2, #0
str r2, [r1]
- @ default value in case no valid rotary switch setting is found
- ldr r2, =(CCCR_L27 | CCCR_M2 | CCCR_N10) @ DEFAULT: {200/200/100}
+ /* default value in case no valid rotary switch setting is found */
+ ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */
-
- @... and write the core clock config register
- @
+ /* ... and write the core clock config register */
ldr r1, =CCCR
str r2, [r1]
-/* @ enable the 32Khz oscillator for RTC and PowerManager
- @
+#ifdef RTC
+ /* enable the 32Khz oscillator for RTC and PowerManager */
+
ldr r1, =OSCC
mov r2, #OSCC_OON
str r2, [r1]
-
- @ NOTE: spin here until OSCC.OOK get set,
- @ meaning the PLL has settled.
- @
+ /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
+ /* has settled. */
60:
ldr r2, [r1]
ands r2, r2, #1
beq 60b
-*/
-
-@OSCC_OON_DONE
-
-
-#ifdef A0_COTULLA
- @****************************************************************************
- @ !!! Take care of A0 Errata Sighting #4 --
- @ after a frequency change, the memory controller must be restarted
- @
-
- @ get memory controller base address
- ldr r1, =MEMC_BASE
-
- @ get the current state of MDREFR
- @
- ldr r2, [r1, #MDREFR_OFFSET]
-
- @ clear E0PIN, E1PIN
- @
- bic r3, r2, #(MDREFR_E0PIN | MDREFR_E1PIN)
-
- @ write MDREFR with E0PIN, E1PIN cleared (disable sdclk[0,1])
- @
- str r3, [r1, #MDREFR_OFFSET]
-
- @ then write MDREFR with E0PIN, E1PIN set (enable sdclk[0,1])
- @
- str r2, [r1, #MDREFR_OFFSET]
-
- @ get the current state of MDCNFG
- @
- ldr r3, [r1, #MDCNFG_OFFSET]
-
- @ disable all SDRAM banks
- @
- bic r3, r3, #(MDCNFG_DE0 | MDCNFG_DE1)
- bic r3, r3, #(MDCNFG_DE2 | MDCNFG_DE3)
-
- @ write back MDCNFG
- @
- ldr r3, [r1, #MDCNFG_OFFSET]
-
- @ Access memory not yet enabled for CBR refresh cycles (8)
- @ - CBR is generated for *all* banks
- ldr r2, =CFG_DRAM_BASE
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
- str r2, [r2]
-
- @ fetch current mdcnfg value
- @
- ldr r3, [r1, #MDCNFG_OFFSET]
-
- @ enable sdram bank 0 if installed
- @
- orr r3, r3, #MDCNFG_DE0
-
- @ write back mdcnfg, enabling the sdram bank(s)
- @
- str r3, [r1, #MDCNFG_OFFSET]
-
- @ write mdmrs
- @
- ldr r2, =CFG_MDMRS_VAL
- str r2, [r1, #MDMRS_OFFSET]
-
-
-
- /* @ errata: don't enable auto power-down */
- @ get current value of mdrefr
- @ldr r3, [r1, #MDREFR_OFFSET]
- @ enable auto-power down
- @orr r3, r3, #MDREFR_APD
- @write back mdrefr
- @str r3, [r1, #MDREFR_OFFSET]
-
-#endif A0_Cotulla
-
-
- ldr r0, =0x000C0dE3
- ldr r1, =_LED
- str r0, [r1] /* hex display */
-
-@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
-@ ^%^%^%^%^%^%^%^%^% above could be replaced by prememLLI ^%^%^%^%^%^%^%^%^%
-@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+#endif
+ /* ---------------------------------------------------------------- */
+ /* */
+ /* ---------------------------------------------------------------- */
/* Save SDRAM size */
ldr r1, =DRAM_SIZE
str r8, [r1]
- ldr r0, =0xC0DE0006
- ldr r1, =_LED
- str r0, [r1] /* hex display */
-
- /* Interrupt init */
- /* Mask all interrupts */
+ /* Interrupt init: Mask all interrupts */
ldr r0, =ICMR /* enable no sources */
mov r1, #0
str r1, [r0]
+ /* FIXME */
+
#define NODEBUG
#ifdef NODEBUG
/*Disable software and data breakpoints */
@@ -676,74 +402,11 @@ mem_init:
#endif
- ldr r0, =0xBEEF001D
- ldr r1, =_LED
- str r0, [r1] /* hex display */
+ /* ---------------------------------------------------------------- */
+ /* End memsetup */
+ /* ---------------------------------------------------------------- */
- mov pc, r10
-
-@ End memsetup
-
-@ %%%%%%%%%%% Useful subroutines
-GET_S23:
- @ This macro will read S23 and return its value in r3
- @ r2 contains the base address of the Lubbock user registers
- ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
- /*@ read S23's value */
- ldr r3, [r2, #USER_SWITCHES_OFFSET]
-
- @ mask out irrelevant bits
- and r3, r3, #0x200
-
- @ get bit into position 0
- mov r3, r3, LSR #9
-
- mov pc, lr
-@ End GET_S23
-
-
-GET_S24:
- @ This macro will read S24 and return its value in r0
- @ r2 contains the base address of the Lubbock user registers
- ldr r2, =FPGA_REGS_BASE_PHYSICAL
-
- /*@ read S24's value */
- ldr r0, [r2, #USER_SWITCHES_OFFSET]
-
- @ mask out irrelevant bits
- and r0, r0, #0x100
-
- @ get bit into position 0
- mov r0, r0, LSR #8
+endmemsetup:
mov pc, lr
-@ End GET_S23
-
-
-GET_S25:
- @ This macro will read rotary S25 and return its value in r0
- @ r2 contains the base address of the Lubbock user registers
- @ read the user switches register
- ldr r0, [r2, #USER_SWITCHES_OFFSET]
-
- @ mask out irrelevant bits
- and r0, r0, #0xF0
-
- mov pc, lr
-@ End subroutine
-
-
-GET_S26:
- @ This macro will read rotary S26 and return its value in r3
- @ r2 contains the base address of the Lubbock user registers
- @ read the user switches register
- ldr r3, [r2, #USER_SWITCHES_OFFSET]
-
- @ mask out irrelevant bits
- and r3, r3, #0x0F
-
- mov pc, lr
-@ End subroutine GET_S26
-
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 1d920fe93..2200a24ce 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified during 2001 by
@@ -31,6 +31,8 @@
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
+#include <i2c.h>
+#include <spd.h>
/*
* I/O Port configuration table
@@ -167,8 +169,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 0, 0, 1, 0, 0 }, /* LED */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
@@ -197,76 +199,222 @@ typedef struct bscr_ {
unsigned long bcsr7;
} bcsr_t;
-void reset_phy(void)
+void reset_phy (void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
+ volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
- /* reset the FEC port */
- bcsr->bcsr1 &= ~FETH_RST;
- bcsr->bcsr1 |= FETH_RST;
+ /* reset the FEC port */
+ bcsr->bcsr1 &= ~FETH_RST;
+ bcsr->bcsr1 |= FETH_RST;
}
int board_pre_init (void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
- bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1;
+ volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
- return 0;
+ bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1;
+
+ return 0;
}
-long int initdram(int board_type)
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
+
+long int initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar *ramaddr,
- c = 0xff;
- int i;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar *ramaddr, c = 0xff;
+
+ /* Initialisation is for 16MB DIMM the board is shipped with */
+ long int msize = 16;
+ uint or = 0xFF000CA0;
+ uint psdmr = CFG_PSDMR;
+ uint psrt = CFG_PSRT;
+
+ int i;
#ifndef CFG_RAMBOOT
- immap->im_siu_conf.sc_ppc_acr = 0x00000002;
- immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
- immap->im_siu_conf.sc_tescr1 = 0x00004000;
-
- /* init local sdram, bank 4 */
- memctl->memc_lsrt = 0x00000010;
- memctl->memc_or4 = 0xFFC01480;
- memctl->memc_br4 = 0x04001861;
- memctl->memc_lsdmr = 0x2886A522;
- ramaddr = (uchar *)CFG_LSDRAM_BASE;
- *ramaddr = c;
- memctl->memc_lsdmr = 0x0886A522;
- for( i = 0; i < 8; i++ ) {
- *ramaddr = c;
- }
- memctl->memc_lsdmr = 0x1886A522;
- *ramaddr = c;
- memctl->memc_lsdmr = 0x4086A522;
-
- /* init sdram dimm */
- ramaddr = (uchar *)CFG_SDRAM_BASE;
- memctl->memc_psrt = 0x00000010;
- immap->im_memctl.memc_or2 = 0xFF000CA0;
- immap->im_memctl.memc_br2 = 0x00000041;
- memctl->memc_psdmr = 0x296EB452;
- *ramaddr = c;
- memctl->memc_psdmr = 0x096EB452;
- for (i = 0; i < 8; i++)
- *ramaddr = c;
-
- memctl->memc_psdmr = 0x196EB452;
- *ramaddr = c;
- memctl->memc_psdmr = 0x416EB452;
- *ramaddr = c;
+ immap->im_siu_conf.sc_ppc_acr = 0x00000002;
+ immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+ immap->im_siu_conf.sc_tescr1 = 0x00004000;
+
+ memctl->memc_mptpr = CFG_MPTPR;
+ /* init local sdram, bank 4 */
+ memctl->memc_lsrt = 0x00000010;
+ memctl->memc_or4 = 0xFFC01480;
+ memctl->memc_br4 = 0x04001861;
+ memctl->memc_lsdmr = 0x2886A522;
+ ramaddr = (uchar *) CFG_LSDRAM_BASE;
+ *ramaddr = c;
+ memctl->memc_lsdmr = 0x0886A522;
+ for (i = 0; i < 8; i++) {
+ *ramaddr = c;
+ }
+ memctl->memc_lsdmr = 0x1886A522;
+ *ramaddr = c;
+ memctl->memc_lsdmr = 0x4086A522;
+
+ /* init sdram dimm */
+#ifdef CONFIG_SPD_EEPROM
+ {
+ spd_eeprom_t spd;
+ uint pbi, bsel, rowst, lsb, tmp;
+
+ i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd));
+
+ /* Bank-based interleaving is not supported for physical bank
+ sizes greater than 128MB which is encoded as 0x20 in SPD
+ */
+ pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI;
+ msize = spd.nrows * (4 * spd.row_dens); /* Mixed size not supported */
+ or = ~(msize - 1) << 20; /* SDAM */
+ switch (spd.nbanks) { /* BPD */
+ case 2:
+ bsel = 1;
+ break;
+ case 4:
+ bsel = 2;
+ or |= 0x00002000;
+ break;
+ case 8:
+ bsel = 3;
+ or |= 0x00004000;
+ break;
+ }
+ lsb = 3; /* For 64-bit port, lsb is 3 bits */
+
+ if (pbi) { /* Bus partition depends on interleaving */
+ rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb);
+ or |= (rowst << 9); /* ROWST */
+ } else {
+ rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb);
+ or |= ((rowst * 2 - 12) << 9); /* ROWST */
+ }
+ or |= ((spd.nrow_addr - 9) << 6); /* NUMR */
+
+ psdmr = (pbi << 31); /* PBI */
+ /* Bus multiplexing parameters */
+ tmp = 32 - (lsb + spd.nrow_addr); /* Tables 10-19 and 10-20 */
+ psdmr |= ((tmp - (rowst - 5) - 13) << 24); /* SDAM */
+ psdmr |= ((tmp - 3 - 12) << 21); /* BSMA */
+
+ tmp = (31 - lsb - 10) - tmp;
+ /* Pin connected to SDA10 is (31 - lsb - 10).
+ rowst is multiplexed over (32 - (lsb + spd.nrow_addr)),
+ so (rowst + tmp) alternates with AP.
+ */
+ if (pbi) /* Table 10-7 */
+ psdmr |= ((10 - (rowst + tmp)) << 18); /* SDA10 */
+ else
+ psdmr |= ((12 - (rowst + tmp)) << 18); /* SDA10 */
+
+ /* SDRAM device-specific parameters */
+ tmp = ns2clk (70); /* Refresh recovery is not in SPD, so assume 70ns */
+ switch (tmp) { /* RFRC */
+ case 1:
+ case 2:
+ psdmr |= (1 << 15);
+ break;
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ psdmr |= ((tmp - 2) << 15);
+ break;
+ default:
+ psdmr |= (7 << 15);
+ }
+ psdmr |= (ns2clk (spd.trp) % 8 << 12); /* PRETOACT */
+ psdmr |= (ns2clk (spd.trcd) % 8 << 9); /* ACTTORW */
+ /* BL=0 because for 64-bit SDRAM burst length must be 4 */
+ /* LDOTOPRE ??? */
+ for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++)
+ tmp >>= 1;
+ switch (i) { /* WRC */
+ case 0:
+ case 1:
+ psdmr |= (1 << 4);
+ break;
+ case 2:
+ case 3:
+ psdmr |= (i << 4);
+ break;
+ }
+ /* EAMUX=0 - no external address multiplexing */
+ /* BUFCMD=0 - no external buffers */
+ for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++)
+ tmp >>= 1;
+ psdmr |= i; /* CL */
+
+ switch (spd.refresh & 0x7F) {
+ case 1:
+ tmp = 3900;
+ break;
+ case 2:
+ tmp = 7800;
+ break;
+ case 3:
+ tmp = 31300;
+ break;
+ case 4:
+ tmp = 62500;
+ break;
+ case 5:
+ tmp = 125000;
+ break;
+ default:
+ tmp = 15625;
+ }
+ psrt = tmp / (1000000000 / CONFIG_8260_CLKIN *
+ ((memctl->memc_mptpr >> 8) + 1)) - 1;
+#ifdef SPD_DEBUG
+ printf ("\nDIMM type: %-18.18s\n", spd.mpart);
+ printf ("SPD size: %d\n", spd.info_size);
+ printf ("EEPROM size: %d\n", 1 << spd.chip_size);
+ printf ("Memory type: %d\n", spd.mem_type);
+ printf ("Row addr: %d\n", spd.nrow_addr);
+ printf ("Column addr: %d\n", spd.ncol_addr);
+ printf ("# of rows: %d\n", spd.nrows);
+ printf ("Row density: %d\n", spd.row_dens);
+ printf ("# of banks: %d\n", spd.nbanks);
+ printf ("Data width: %d\n",
+ 256 * spd.dataw_msb + spd.dataw_lsb);
+ printf ("Chip width: %d\n", spd.primw);
+ printf ("Refresh rate: %02X\n", spd.refresh);
+ printf ("CAS latencies: %02X\n", spd.cas_lat);
+ printf ("Write latencies: %02X\n", spd.write_lat);
+ printf ("tRP: %d\n", spd.trp);
+ printf ("tRCD: %d\n", spd.trcd);
+
+ printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
+#endif /* SPD_DEBUG */
+ }
+#endif /* CONFIG_SPD_EEPROM */
+ memctl->memc_psrt = psrt;
+ memctl->memc_or2 = or;
+ memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041;
+ ramaddr = (uchar *) CFG_SDRAM_BASE;
+ memctl->memc_psdmr = psdmr | 0x28000000; /* Precharge all banks */
+ *ramaddr = c;
+ memctl->memc_psdmr = psdmr | 0x08000000; /* CBR refresh */
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | 0x18000000; /* Mode Register write */
+ *ramaddr = c;
+ memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */
+ *ramaddr = c;
#endif
- /* return total ram size of simm */
- return (16 * 1024 * 1024);
+ /* return total ram size of DIMM */
+ return (msize * 1024 * 1024);
}
-int checkboard(void)
+int checkboard (void)
{
- puts ("Board: Motorola MPC8260ADS\n");
- return 0;
+ puts ("Board: Motorola MPC8260ADS\n");
+ return 0;
}
-
diff --git a/board/mpc8266ads/Makefile b/board/mpc8266ads/Makefile
new file mode 100644
index 000000000..9280bf7d6
--- /dev/null
+++ b/board/mpc8266ads/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8266ads/config.mk b/board/mpc8266ads/config.mk
new file mode 100644
index 000000000..9d5559826
--- /dev/null
+++ b/board/mpc8266ads/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Modified by, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8260ads board
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/mpc8266ads/flash.c b/board/mpc8266ads/flash.c
new file mode 100644
index 000000000..5ec6e33cf
--- /dev/null
+++ b/board/mpc8266ads/flash.c
@@ -0,0 +1,509 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifndef CONFIG_MPC8260ADS
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+#endif
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+#ifndef CONFIG_MPC8260ADS
+ bcsr->bd_ctrl |= BD_CTRL_FLWE;
+#endif
+
+
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* set the default sector offset */
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+#ifndef CONFIG_MPC8260ADS
+ /* Remap FLASH according to real size */
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+ (memctl->memc_br1 & ~(BR_BA_MSK));
+#endif
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_SHARP: printf ("Sharp "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+ break;
+ case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+ break;
+ case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+ break;
+ case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+ ulong sector_offset;
+
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+
+ value = addr[0] & 0x00FF00FF;
+ switch (value) {
+ case MT_MANUFACT: /* SHARP, MT or => Intel */
+ case INTEL_ALT_MANU:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ printf("unknown manufacturer: %x\n", (unsigned int)value);
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case (INTEL_ID_28F016S):
+ info->flash_id += FLASH_28F016SV;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F160S3):
+ info->flash_id += FLASH_28F160S3;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F320S3):
+ info->flash_id += FLASH_28F320S3;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ sector_offset = 0x20000;
+ break; /* => 2x4 MB */
+
+ case SHARP_ID_28F016SCL:
+ case SHARP_ID_28F016SCZ:
+ info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+ info->sector_count = 32;
+ info->size = 0x00800000;
+ sector_offset = 0x40000;
+ break; /* => 4x2 MB */
+
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += sector_offset;
+ /* don't know how to check sector protection */
+ info->protect[i] = 0;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+ && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* Make Sure Block Lock Bit is not set. */
+ if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+ return 1;
+ }
+
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ last = start = get_timer (0);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+ while ((*addr & 0x80808080) != 0x80808080) {
+ if(*addr & 0x20202020){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr);
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ }
+ }
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x10101010;
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+ while (((csr = *addr) & 0x80808080) != 0x80808080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x40404040) {
+ printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long * addr)
+{
+ ulong start, now;
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+
+ *addr = 0x60606060;
+ *addr = 0xd0d0d0d0;
+
+ start = get_timer (0);
+ while(*addr != 0x80808080){
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout on clearing Block Lock Bit\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ }
+ return 0;
+}
diff --git a/board/mpc8266ads/mpc8266ads.c b/board/mpc8266ads/mpc8266ads.c
new file mode 100644
index 000000000..796b37de1
--- /dev/null
+++ b/board/mpc8266ads/mpc8266ads.c
@@ -0,0 +1,565 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified during 2001 by
+ * Advanced Communications Technologies (Australia) Pty. Ltd.
+ * Howard Walker, Tuong Vu-Dinh
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Added support for the 16M dram simm on the 8260ads boards
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <i2c.h>
+#include <mpc8260.h>
+
+/*
+ * PBI Page Based Interleaving
+ * PSDMR_PBI page based interleaving
+ * 0 bank based interleaving
+ * External Address Multiplexing (EAMUX) adds a clock to address cycles
+ * (this can help with marginal board layouts)
+ * PSDMR_EAMUX adds a clock
+ * 0 no extra clock
+ * Buffer Command (BUFCMD) adds a clock to command cycles.
+ * PSDMR_BUFCMD adds a clock
+ * 0 no extra clock
+ */
+#define CONFIG_PBI 0
+#define PESSIMISTIC_SDRAM 0
+#define EAMUX 0 /* EST requires EAMUX */
+#define BUFCMD 0
+
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
+ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
+ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
+ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
+ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
+ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
+ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
+ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
+ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 1, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
+ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
+ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
+ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
+ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
+ /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
+ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
+ /* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDC */
+ /* PC9 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */
+ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */
+ /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */
+ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
+ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
+ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
+ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+typedef struct bscr_ {
+ unsigned long bcsr0;
+ unsigned long bcsr1;
+ unsigned long bcsr2;
+ unsigned long bcsr3;
+ unsigned long bcsr4;
+ unsigned long bcsr5;
+ unsigned long bcsr6;
+ unsigned long bcsr7;
+} bcsr_t;
+
+void reset_phy(void)
+{
+ volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
+
+ /* reset the FEC port */
+ bcsr->bcsr1 &= ~FETH_RST;
+ bcsr->bcsr1 |= FETH_RST;
+}
+
+
+int board_pre_init (void)
+{
+ volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR;
+ bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts ("Board: Motorola MPC8266ADS\n");
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ /* Autoinit part stolen from board/sacsng/sacsng.c */
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0xff;
+ volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
+ uint psdmr = CFG_PSDMR;
+ int i;
+
+ uint psrt = 14; /* for no SPD */
+ uint chipselects = 1; /* for no SPD */
+ uint sdram_size = CFG_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
+ uint or = CFG_OR2_PRELIM; /* for no SPD */
+ uint data_width;
+ uint rows;
+ uint banks;
+ uint cols;
+ uint caslatency;
+ uint width;
+ uint rowst;
+ uint sdam;
+ uint bsma;
+ uint sda10;
+ u_char spd_size;
+ u_char data;
+ u_char cksum;
+ int j;
+
+ /* Keep the compiler from complaining about potentially uninitialized vars */
+ data_width = chipselects = rows = banks = cols = caslatency = psrt = 0;
+
+ /*
+ * Read the SDRAM SPD EEPROM via I2C.
+ */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
+ spd_size = data;
+ cksum = data;
+ for(j = 1; j < 64; j++)
+ { /* read only the checksummed bytes */
+ /* note: the I2C address autoincrements when alen == 0 */
+ i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
+ /*printf("addr %d = 0x%02x\n", j, data);*/
+ if(j == 5) chipselects = data & 0x0F;
+ else if(j == 6) data_width = data;
+ else if(j == 7) data_width |= data << 8;
+ else if(j == 3) rows = data & 0x0F;
+ else if(j == 4) cols = data & 0x0F;
+ else if(j == 12)
+ {
+ /*
+ * Refresh rate: this assumes the prescaler is set to
+ * approximately 1uSec per tick.
+ */
+ switch(data & 0x7F)
+ {
+ default:
+ case 0: psrt = 16; /* 15.625uS */ break;
+ case 1: psrt = 2; /* 3.9uS */ break;
+ case 2: psrt = 6; /* 7.8uS */ break;
+ case 3: psrt = 29; /* 31.3uS */ break;
+ case 4: psrt = 60; /* 62.5uS */ break;
+ case 5: psrt = 120; /* 125uS */ break;
+ }
+ }
+ else if(j == 17) banks = data;
+ else if(j == 18)
+ {
+ caslatency = 3; /* default CL */
+# if(PESSIMISTIC_SDRAM)
+ if((data & 0x04) != 0) caslatency = 3;
+ else if((data & 0x02) != 0) caslatency = 2;
+ else if((data & 0x01) != 0) caslatency = 1;
+# else
+ if((data & 0x01) != 0) caslatency = 1;
+ else if((data & 0x02) != 0) caslatency = 2;
+ else if((data & 0x04) != 0) caslatency = 3;
+# endif
+ else
+ {
+ printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
+ data);
+ }
+ }
+ else if(j == 63)
+ {
+ if(data != cksum)
+ {
+ printf ("WARNING: Configuration data checksum failure:"
+ " is 0x%02x, calculated 0x%02x\n",
+ data, cksum);
+ }
+ }
+ cksum += data;
+ }
+
+ /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
+ if(caslatency < 2) {
+ printf("CL was %d, forcing to 2\n", caslatency);
+ caslatency = 2;
+ }
+ if(rows > 14) {
+ printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+ rows = 14;
+ }
+ if(cols > 11) {
+ printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+ cols = 11;
+ }
+
+ if((data_width != 64) && (data_width != 72))
+ {
+ printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
+ data_width);
+ }
+ width = 3; /* 2^3 = 8 bytes = 64 bits wide */
+ /*
+ * Convert banks into log2(banks)
+ */
+ if (banks == 2) banks = 1;
+ else if(banks == 4) banks = 2;
+ else if(banks == 8) banks = 3;
+
+
+ sdram_size = 1 << (rows + cols + banks + width);
+
+#if(CONFIG_PBI == 0) /* bank-based interleaving */
+ rowst = ((32 - 6) - (rows + cols + width)) * 2;
+#else
+ rowst = 32 - (rows + banks + cols + width);
+#endif
+
+ or = ~(sdram_size - 1) | /* SDAM address mask */
+ ((banks-1) << 13) | /* banks per device */
+ (rowst << 9) | /* rowst */
+ ((rows - 9) << 6); /* numr */
+
+
+ /*printf("memctl->memc_or2 = 0x%08x\n", or);*/
+
+ /*
+ * SDAM specifies the number of columns that are multiplexed
+ * (reference AN2165/D), defined to be (columns - 6) for page
+ * interleave, (columns - 8) for bank interleave.
+ *
+ * BSMA is 14 - max(rows, cols). The bank select lines come
+ * into play above the highest "address" line going into the
+ * the SDRAM.
+ */
+#if(CONFIG_PBI == 0) /* bank-based interleaving */
+ sdam = cols - 8;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam + 2;
+#else
+ sdam = cols - 6;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam;
+#endif
+#if(PESSIMISTIC_SDRAM)
+ psdmr = (CONFIG_PBI |\
+ PSDMR_RFEN |\
+ PSDMR_RFRC_16_CLK |\
+ PSDMR_PRETOACT_8W |\
+ PSDMR_ACTTORW_8W |\
+ PSDMR_WRC_4C |\
+ PSDMR_EAMUX |\
+ PSDMR_BUFCMD) |\
+ caslatency |\
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
+ (sdam << 24) |\
+ (bsma << 21) |\
+ (sda10 << 18);
+#else
+ psdmr = (CONFIG_PBI |\
+ PSDMR_RFEN |\
+ PSDMR_RFRC_7_CLK |\
+ PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */ \
+ PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */ \
+ PSDMR_WRC_1C | /* 1 clock + 7nSec */
+ EAMUX |\
+ BUFCMD) |\
+ caslatency |\
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
+ (sdam << 24) |\
+ (bsma << 21) |\
+ (sda10 << 18);
+#endif
+ /*printf("psdmr = 0x%08x\n", psdmr);*/
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * Quote from Micron MT48LC8M16A2 data sheet:
+ *
+ * "...the SDRAM requires a 100uS delay prior to issuing any
+ * command other than a COMMAND INHIBIT or NOP. Starting at some
+ * point during this 100uS period and continuing at least through
+ * the end of this period, COMMAND INHIBIT or NOP commands should
+ * be applied."
+ *
+ * "Once the 100uS delay has been satisfied with at least one COMMAND
+ * INHIBIT or NOP command having been applied, a /PRECHARGE command/
+ * should be applied. All banks must then be precharged, thereby
+ * placing the device in the all banks idle state."
+ *
+ * "Once in the idle state, /two/ AUTO REFRESH cycles must be
+ * performed. After the AUTO REFRESH cycles are complete, the
+ * SDRAM is ready for mode register programming."
+ *
+ * (/emphasis/ mine, gvb)
+ *
+ * The way I interpret this, Micron start up sequence is:
+ * 1. Issue a PRECHARGE-BANK command (initial precharge)
+ * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
+ * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
+ * 4. Issue a MODE-SET command to initialize the mode register
+ *
+ * --------
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+#if 1
+ memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = psrt;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+
+ /*
+ * Do it a second time for the second set of chips if the DIMM has
+ * two chip selects (double sided).
+ */
+ if(chipselects > 1)
+ {
+ ramaddr += sdram_size;
+
+ memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+ memctl->memc_or3 = or;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+ }
+#endif
+ /*
+ printf("memctl->memc_mptpr = 0x%08x\n", CFG_MPTPR);
+ printf("memctl->memc_psrt = 0x%08x\n", psrt);
+
+ printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_PREA);
+ printf("ramaddr = 0x%08x\n", ramaddr);
+
+ printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_CBRR);
+
+ printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_MRW);
+
+ printf("memctl->memc_psdmr = 0x%08x\n", psdmr | PSDMR_OP_NORM | PSDMR_RFEN);
+
+ immap->im_siu_conf.sc_ppc_acr = 0x00000002;
+ immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+ immap->im_siu_conf.sc_tescr1 = 0x00004000;
+ */
+#if 0
+ /* init sdram dimm */
+ ramaddr = (uchar *)CFG_SDRAM_BASE;
+ memctl->memc_psrt = 0x00000010;
+ immap->im_memctl.memc_or2 = 0xFF000CA0;
+ immap->im_memctl.memc_br2 = 0x00000041;
+ memctl->memc_psdmr = 0x296EB452;
+ *ramaddr = c;
+ memctl->memc_psdmr = 0x096EB452;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = 0x196EB452;
+ *ramaddr = c;
+ memctl->memc_psdmr = 0x416EB452;
+ *ramaddr = c;
+#endif
+ /* print info */
+ printf("SDRAM configuration read from SPD\n");
+ printf("\tSize per side = %dMB\n", sdram_size >> 20);
+ printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
+ printf("\tRefresh rate = %d, CAS latency = %d\n", psrt, caslatency);
+ printf("\tTotal size: ");
+
+ return (sdram_size * chipselects);
+ /*return (16 * 1024 * 1024);*/
+}
diff --git a/board/mpc8266ads/u-boot.lds b/board/mpc8266ads/u-boot.lds
new file mode 100644
index 000000000..671e70db8
--- /dev/null
+++ b/board/mpc8266ads/u-boot.lds
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/w7o/init.S b/board/w7o/init.S
index 0abf21fe8..511a1bb52 100644
--- a/board/w7o/init.S
+++ b/board/w7o/init.S
@@ -162,6 +162,7 @@ sdram_init:
* contents of the SPD EEPROM. If the SPD EEPROM is blank or
* erronious, spd_sdram returns 0 in R3.
*/
+ li r3,0
bl spd_sdram
addic. r3, r3, 0 /* Check for error, save dram size */
bne ..sdri_done /* If it worked, we're done... */
diff --git a/board/walnut405/walnut405.c b/board/walnut405/walnut405.c
index 93c203432..598509f7c 100644
--- a/board/walnut405/walnut405.c
+++ b/board/walnut405/walnut405.c
@@ -20,13 +20,11 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-long int spd_sdram (void);
#include <common.h>
#include "walnut405.h"
#include <asm/processor.h>
-
-
+#include <spd_sdram.h>
int board_pre_init (void)
{
@@ -118,11 +116,8 @@ int checkboard (void)
the necessary info for SDRAM controller configuration
------------------------------------------------------------------------- */
long int initdram (int board_type)
-{
- long int ret;
-
- ret = spd_sdram ();
- return ret;
+{
+ return spd_sdram (0);
}
/* ------------------------------------------------------------------------- */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-23 14:52:42 +0000