diff options
| -rw-r--r-- | Makefile | 5 | ||||
| -rw-r--r-- | common/image.c | 1 | ||||
| -rw-r--r-- | doc/README.kwbimage | 93 | ||||
| -rw-r--r-- | include/image.h | 1 | ||||
| -rw-r--r-- | tools/Makefile | 5 | ||||
| -rw-r--r-- | tools/kwbimage.c | 405 | ||||
| -rw-r--r-- | tools/kwbimage.h | 106 | ||||
| -rw-r--r-- | tools/mkimage.c | 2 | ||||
| -rw-r--r-- | tools/mkimage.h | 1 |
9 files changed, 619 insertions, 0 deletions
@@ -324,6 +324,10 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ +$(obj)u-boot.kwb: $(obj)u-boot.bin + $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ + -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ + $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)tools/ubsha1 $(obj)u-boot.bin @@ -3759,6 +3763,7 @@ clobber: clean @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) + @rm -f $(obj)u-boot.kwb @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm diff --git a/common/image.c b/common/image.c index e8ecfa5c0..d0f169d66 100644 --- a/common/image.c +++ b/common/image.c @@ -139,6 +139,7 @@ static table_entry_t uimage_type[] = { { IH_TYPE_SCRIPT, "script", "Script", }, { IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, { IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", }, + { IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",}, { -1, "", "", }, }; diff --git a/doc/README.kwbimage b/doc/README.kwbimage new file mode 100644 index 000000000..2a5b3b3be --- /dev/null +++ b/doc/README.kwbimage @@ -0,0 +1,93 @@ +--------------------------------------------- +Kirkwood Boot Image generation using mkimage +--------------------------------------------- + +This document describes the U-Boot feature as it +is implemented for the Kirkwood family of SoCs. + +The Kirkwood SoC's can boot directly from NAND FLASH, +SPI FLASH, SATA etc. using its internal bootRom support. + +for more details refer section 24.2 of Kirkwood functional specifications. +ref: www.marvell.com/products/embedded.../kirkwood/index.jsp + +Command syntax: +-------------- +./tools/mkimage -l <kwboot_file> + to list the kwb image file details + +./tools/mkimage -n <board specific configuration file> \ + -T kwbimage -a <start address> -e <execution address> \ + -d <input_raw_binary> <output_kwboot_file> + +for ex. +./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ + -T kwbimage -a 0x00600000 -e 0x00600000 \ + -d u-boot.bin u-boot.kwb + +kwimage support available with mkimage utility will generate kirkwood boot +image that can be flashed on the board NAND/SPI flash + +Board specific configuration file specifications: +------------------------------------------------ +1. This file must present in the $(BOARDDIR) and the name should be + kwbimage.cfg (since this is used in Makefile) +2. This file can have empty lines and lines starting with "#" as first + character to put comments +3. This file can have configuration command lines as mentioned below, + any other information in this file is treated as invalid. + +Configuration command line syntax: +--------------------------------- +1. Each command line is must have two strings, first one command or address + and second one data string +2. Following are the valid command strings and associated data strings:- + Command string data string + -------------- ----------- + BOOT_FROM nand/spi/sata + NAND_ECC_MODE default/rs/hamming/disabled + NAND_PAGE_SIZE any uint16_t hex value + SATA_PIO_MODE any uint32_t hex value + DDR_INIT_DELAY any uint32_t hex value + DATA regaddr and regdara hex value + you can have maximum 55 such register programming commands + +3. All commands are optional to program + +Typical example of kwimage.cfg file: +----------------------------------- + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b1b9b +# DRAM Configuration +DATA 0xFFD01400 0x43000c30 +DATA 0xFFD01404 0x37543000 +DATA 0xFFD01408 0x22125451 +DATA 0xFFD0140C 0x00000a33 +DATA 0xFFD01410 0x000000cc +DATA 0xFFD01414 0x00000000 +DATA 0xFFD01418 0x00000000 +DATA 0xFFD0141C 0x00000C52 +DATA 0xFFD01420 0x00000040 +DATA 0xFFD01424 0x0000F17F +DATA 0xFFD01428 0x00085520 +DATA 0xFFD0147C 0x00008552 +DATA 0xFFD01504 0x0FFFFFF1 +DATA 0xFFD01508 0x10000000 +DATA 0xFFD0150C 0x0FFFFFF5 +DATA 0xFFD01514 0x00000000 +DATA 0xFFD0151C 0x00000000 +DATA 0xFFD01494 0x00030000 +DATA 0xFFD01498 0x00000000 +DATA 0xFFD0149C 0x0000E803 +DATA 0xFFD01480 0x00000001 +# End of Header extension +DATA 0x0 0x0 + +------------------------------------------------ +Author: Prafulla Wadaskar <prafulla@marvell.com> diff --git a/include/image.h b/include/image.h index d4cbf8c70..5a424e6a9 100644 --- a/include/image.h +++ b/include/image.h @@ -155,6 +155,7 @@ #define IH_TYPE_SCRIPT 6 /* Script file */ #define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */ #define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */ +#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */ /* * Compression Types diff --git a/tools/Makefile b/tools/Makefile index d5c23fd7e..b04e3f304 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -99,6 +99,7 @@ OBJ_FILES-y += fit_image.o OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o OBJ_FILES-$(CONFIG_INCA_IP) += inca-swap-bytes.o +OBJ_FILES-y += kwbimage.o OBJ_FILES-y += mkimage.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o OBJ_FILES-y += os_support.o @@ -189,6 +190,7 @@ $(obj)mkimage$(SFX): $(obj)crc32.o \ $(obj)default_image.o \ $(obj)fit_image.o \ $(obj)image.o \ + $(obj)kwbimage.o \ $(obj)md5.o \ $(obj)mkimage.o \ $(obj)os_support.o \ @@ -218,6 +220,9 @@ $(obj)fit_image.o: $(SRCTREE)/tools/fit_image.c $(obj)image.o: $(SRCTREE)/common/image.c $(CC) -g $(FIT_CFLAGS) -c -o $@ $< +$(obj)kwbimage.o: $(SRCTREE)/tools/kwbimage.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(obj)mkimage.o: $(SRCTREE)/tools/mkimage.c $(CC) -g $(FIT_CFLAGS) -c -o $@ $< diff --git a/tools/kwbimage.c b/tools/kwbimage.c new file mode 100644 index 000000000..28dc2d605 --- /dev/null +++ b/tools/kwbimage.c @@ -0,0 +1,405 @@ +/* + * (C) Copyright 2008 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Required to obtain the getline prototype from stdio.h */ +#define _GNU_SOURCE + +#include "mkimage.h" +#include <image.h> +#include "kwbimage.h" + +/* + * Supported commands for configuration file + */ +static table_entry_t kwbimage_cmds[] = { + {CMD_BOOT_FROM, "BOOT_FROM", "boot comand", }, + {CMD_NAND_ECC_MODE, "NAND_ECC_MODE", "NAND mode", }, + {CMD_NAND_PAGE_SIZE, "NAND_PAGE_SIZE", "NAND size", }, + {CMD_SATA_PIO_MODE, "SATA_PIO_MODE", "SATA mode", }, + {CMD_DDR_INIT_DELAY, "DDR_INIT_DELAY", "DDR init dly", }, + {CMD_DATA, "DATA", "Reg Write Data", }, + {CMD_INVALID, "", "", }, +}; + +/* + * Supported Boot options for configuration file + */ +static table_entry_t kwbimage_bootops[] = { + {IBR_HDR_SPI_ID, "spi", "SPI Flash", }, + {IBR_HDR_NAND_ID, "nand", "NAND Flash", }, + {IBR_HDR_SATA_ID, "sata", "Sata port", }, + {IBR_HDR_PEX_ID, "pex", "PCIe port", }, + {IBR_HDR_UART_ID, "uart", "Serial port", }, + {-1, "", "Invalid", }, +}; + +/* + * Supported NAND ecc options configuration file + */ +static table_entry_t kwbimage_eccmodes[] = { + {IBR_HDR_ECC_DEFAULT, "default", "Default mode", }, + {IBR_HDR_ECC_FORCED_HAMMING, "hamming", "Hamming mode", }, + {IBR_HDR_ECC_FORCED_RS, "rs", "RS mode", }, + {IBR_HDR_ECC_DISABLED, "disabled", "ECC Disabled", }, + {-1, "", "", }, +}; + +static struct kwb_header kwbimage_header; +static int datacmd_cnt = 0; +static char * fname = "Unknown"; +static int lineno = -1; + +/* + * Report Error if xflag is set in addition to default + */ +static int kwbimage_check_params (struct mkimage_params *params) +{ + if (!strlen (params->imagename)) { + printf ("Error:%s - Configuration file not specified, " + "it is needed for kwbimage generation\n", + params->cmdname); + return CFG_INVALID; + } + return ((params->dflag && (params->fflag || params->lflag)) || + (params->fflag && (params->dflag || params->lflag)) || + (params->lflag && (params->dflag || params->fflag)) || + (params->xflag) || !(strlen (params->imagename))); +} + +static uint32_t check_get_hexval (char *token) +{ + uint32_t hexval; + + if (!sscanf (token, "%x", &hexval)) { + printf ("Error:%s[%d] - Invalid hex data(%s)\n", fname, + lineno, token); + exit (EXIT_FAILURE); + } + return hexval; +} + +/* + * Generates 8 bit checksum + */ +static uint8_t kwbimage_checksum8 (void *start, uint32_t len, uint8_t csum) +{ + register uint8_t sum = csum; + volatile uint8_t *p = (volatile uint8_t *)start; + + /* check len and return zero checksum if invalid */ + if (!len) + return 0; + + do { + sum += *p; + p++; + } while (--len); + return (sum); +} + +/* + * Generates 32 bit checksum + */ +static uint32_t kwbimage_checksum32 (uint32_t *start, uint32_t len, uint32_t csum) +{ + register uint32_t sum = csum; + volatile uint32_t *p = start; + + /* check len and return zero checksum if invalid */ + if (!len) + return 0; + + if (len % sizeof(uint32_t)) { + printf ("Error:%s[%d] - lenght is not in multiple of %d\n", + __FUNCTION__, len, sizeof(uint32_t)); + return 0; + } + + do { + sum += *p; + p++; + len -= sizeof(uint32_t); + } while (len > 0); + return (sum); +} + +static void kwbimage_check_cfgdata (char *token, enum kwbimage_cmd cmdsw, + struct kwb_header *kwbhdr) +{ + bhr_t *mhdr = &kwbhdr->kwb_hdr; + extbhr_t *exthdr = &kwbhdr->kwb_exthdr; + int i; + + switch (cmdsw) { + case CMD_BOOT_FROM: + i = get_table_entry_id (kwbimage_bootops, + "Kwbimage boot option", token); + + if (i < 0) + goto INVL_DATA; + + mhdr->blockid = i; + printf ("Preparing kirkwood boot image to boot " + "from %s\n", token); + break; + case CMD_NAND_ECC_MODE: + i = get_table_entry_id (kwbimage_eccmodes, + "NAND ecc mode", token); + + if (i < 0) + goto INVL_DATA; + + mhdr->nandeccmode = i; + printf ("Nand ECC mode = %s\n", token); + break; + case CMD_NAND_PAGE_SIZE: + mhdr->nandpagesize = + (uint16_t) check_get_hexval (token); + printf ("Nand page size = 0x%x\n", mhdr->nandpagesize); + break; + case CMD_SATA_PIO_MODE: + mhdr->satapiomode = + (uint8_t) check_get_hexval (token); + printf ("Sata PIO mode = 0x%x\n", + mhdr->satapiomode); + break; + case CMD_DDR_INIT_DELAY: + mhdr->ddrinitdelay = + (uint16_t) check_get_hexval (token); + printf ("DDR init delay = %d msec\n", mhdr->ddrinitdelay); + break; + case CMD_DATA: + exthdr->rcfg[datacmd_cnt].raddr = + check_get_hexval (token); + + break; + case CMD_INVALID: + goto INVL_DATA; + default: + goto INVL_DATA; + } + return; + +INVL_DATA: + printf ("Error:%s[%d] - Invalid data\n", fname, lineno); + exit (EXIT_FAILURE); +} + +/* + * this function sets the kwbimage header by- + * 1. Abstracting input command line arguments data + * 2. parses the kwbimage configuration file and update extebded header data + * 3. calculates header, extended header and image checksums + */ +static void kwdimage_set_ext_header (struct kwb_header *kwbhdr, char* name) { + bhr_t *mhdr = &kwbhdr->kwb_hdr; + extbhr_t *exthdr = &kwbhdr->kwb_exthdr; + FILE *fd = NULL; + int j; + char *line = NULL; + char * token, *saveptr1, *saveptr2; + size_t len = 0; + enum kwbimage_cmd cmd; + + fname = name; + /* set dram register offset */ + exthdr->dramregsoffs = (intptr_t)&exthdr->rcfg - (intptr_t)mhdr; + + if ((fd = fopen (name, "r")) == 0) { + printf ("Error:%s - Can't open\n", fname); + exit (EXIT_FAILURE); + } + + /* Simple kwimage.cfg file parser */ + lineno=0; + while ((getline (&line, &len, fd)) > 0) { + lineno++; + token = strtok_r (line, "\r\n", &saveptr1); + /* drop all lines with zero tokens (= empty lines) */ + if (token == NULL) + continue; + + for (j = 0, cmd = CMD_INVALID, line = token; ; line = NULL) { + token = strtok_r (line, " \t", &saveptr2); + if (token == NULL) + break; + /* Drop all text starting with '#' as comments */ + if (token[0] == '#') + break; + + /* Process rest as valid config command line */ + switch (j) { + case CFG_COMMAND: + cmd = get_table_entry_id (kwbimage_cmds, + "Kwbimage command", token); + + if (cmd == CMD_INVALID) + goto INVL_CMD; + break; + + case CFG_DATA0: + kwbimage_check_cfgdata (token, cmd, kwbhdr); + break; + + case CFG_DATA1: + if (cmd != CMD_DATA) + goto INVL_CMD; + + exthdr->rcfg[datacmd_cnt].rdata = + check_get_hexval (token); + + if (datacmd_cnt > KWBIMAGE_MAX_CONFIG ) { + printf ("Error:%s[%d] - Found more " + "than max(%zd) allowed " + "data configurations\n", + fname, lineno, + KWBIMAGE_MAX_CONFIG); + exit (EXIT_FAILURE); + } else + datacmd_cnt++; + break; + + default: + goto INVL_CMD; + } + j++; + } + } + if (line) + free (line); + + fclose (fd); + return; + +/* + * Invalid Command error reporring + * + * command CMD_DATA needs three strings on a line + * whereas other commands need only two. + * + * if more than two/three (as per command type) are observed, + * then error will be reported + */ +INVL_CMD: + printf ("Error:%s[%d] - Invalid command\n", fname, lineno); + exit (EXIT_FAILURE); +} + +static void kwbimage_set_header (void *ptr, struct stat *sbuf, int ifd, + struct mkimage_params *params) +{ + struct kwb_header *hdr = (struct kwb_header *)ptr; + bhr_t *mhdr = &hdr->kwb_hdr; + extbhr_t *exthdr = &hdr->kwb_exthdr; + uint32_t checksum; + int size; + + /* Build and add image checksum header */ + checksum = kwbimage_checksum32 ((uint32_t *)ptr, sbuf->st_size, 0); + + size = write (ifd, &checksum, sizeof(uint32_t)); + if (size != sizeof(uint32_t)) { + printf ("Error:%s - Checksum write %d bytes %s\n", + params->cmdname, size, params->imagefile); + exit (EXIT_FAILURE); + } + + sbuf->st_size += sizeof(uint32_t); + + mhdr->blocksize = sbuf->st_size - sizeof(struct kwb_header); + mhdr->srcaddr = sizeof(struct kwb_header); + mhdr->destaddr= params->addr; + mhdr->execaddr =params->ep; + mhdr->ext = 0x1; /* header extension appended */ + + kwdimage_set_ext_header (hdr, params->imagename); + /* calculate checksums */ + mhdr->checkSum = kwbimage_checksum8 ((void *)mhdr, sizeof(bhr_t), 0); + exthdr->checkSum = kwbimage_checksum8 ((void *)exthdr, + sizeof(extbhr_t), 0); +} + +static int kwbimage_verify_header (unsigned char *ptr, int image_size, + struct mkimage_params *params) +{ + struct kwb_header *hdr = (struct kwb_header *)ptr; + bhr_t *mhdr = &hdr->kwb_hdr; + extbhr_t *exthdr = &hdr->kwb_exthdr; + uint8_t calc_hdrcsum; + uint8_t calc_exthdrcsum; + + calc_hdrcsum = kwbimage_checksum8 ((void *)mhdr, + sizeof(bhr_t) - sizeof(uint8_t), 0); + if (calc_hdrcsum != mhdr->checkSum) + return -FDT_ERR_BADSTRUCTURE; /* mhdr csum not matched */ + + calc_exthdrcsum = kwbimage_checksum8 ((void *)exthdr, + sizeof(extbhr_t) - sizeof(uint8_t), 0); + if (calc_hdrcsum != mhdr->checkSum) + return -FDT_ERR_BADSTRUCTURE; /* exthdr csum not matched */ + + return 0; +} + +static void kwbimage_print_header (const void *ptr) +{ + struct kwb_header *hdr = (struct kwb_header *) ptr; + bhr_t *mhdr = &hdr->kwb_hdr; + char *name = get_table_entry_name (kwbimage_bootops, + "Kwbimage boot option", + (int) mhdr->blockid); + + printf ("Image Type: Kirkwood Boot from %s Image\n", name); + printf ("Data Size: "); + genimg_print_size (mhdr->blocksize - sizeof(uint32_t)); + printf ("Load Address: %08x\n", mhdr->destaddr); + printf ("Entry Point: %08x\n", mhdr->execaddr); +} + +static int kwbimage_check_image_types (uint8_t type) +{ + if (type == IH_TYPE_KWBIMAGE) + return EXIT_SUCCESS; + else + return EXIT_FAILURE; +} + +/* + * kwbimage type parameters definition + */ +static struct image_type_params kwbimage_params = { + .name = "Kirkwood Boot Image support", + .header_size = sizeof(struct kwb_header), + .hdr = (void*)&kwbimage_header, + .check_image_type = kwbimage_check_image_types, + .verify_header = kwbimage_verify_header, + .print_header = kwbimage_print_header, + .set_header = kwbimage_set_header, + .check_params = kwbimage_check_params, +}; + +void init_kwb_image_type (void) +{ + mkimage_register (&kwbimage_params); +} diff --git a/tools/kwbimage.h b/tools/kwbimage.h new file mode 100644 index 000000000..3d3d5e913 --- /dev/null +++ b/tools/kwbimage.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2008 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _KWBIMAGE_H_ +#define _KWBIMAGE_H_ + +#include <stdint.h> + +#define KWBIMAGE_MAX_CONFIG ((0x1dc - 0x20)/sizeof(struct reg_config)) +#define MAX_TEMPBUF_LEN 32 + +/* NAND ECC Mode */ +#define IBR_HDR_ECC_DEFAULT 0x00 +#define IBR_HDR_ECC_FORCED_HAMMING 0x01 +#define IBR_HDR_ECC_FORCED_RS 0x02 +#define IBR_HDR_ECC_DISABLED 0x03 + +/* Boot Type - block ID */ +#define IBR_HDR_I2C_ID 0x4D +#define IBR_HDR_SPI_ID 0x5A +#define IBR_HDR_NAND_ID 0x8B +#define IBR_HDR_SATA_ID 0x78 +#define IBR_HDR_PEX_ID 0x9C +#define IBR_HDR_UART_ID 0x69 +#define IBR_DEF_ATTRIB 0x00 + +enum kwbimage_cmd { + CMD_INVALID, + CMD_BOOT_FROM, + CMD_NAND_ECC_MODE, + CMD_NAND_PAGE_SIZE, + CMD_SATA_PIO_MODE, + CMD_DDR_INIT_DELAY, + CMD_DATA +}; + +enum kwbimage_cmd_types { + CFG_INVALID = -1, + CFG_COMMAND, + CFG_DATA0, + CFG_DATA1 +}; + +/* typedefs */ +typedef struct bhr_t { + uint8_t blockid; /*0 */ + uint8_t nandeccmode; /*1 */ + uint16_t nandpagesize; /*2-3 */ + uint32_t blocksize; /*4-7 */ + uint32_t rsvd1; /*8-11 */ + uint32_t srcaddr; /*12-15 */ + uint32_t destaddr; /*16-19 */ + uint32_t execaddr; /*20-23 */ + uint8_t satapiomode; /*24 */ + uint8_t rsvd3; /*25 */ + uint16_t ddrinitdelay; /*26-27 */ + uint16_t rsvd2; /*28-29 */ + uint8_t ext; /*30 */ + uint8_t checkSum; /*31 */ +} bhr_t, *pbhr_t; + +struct reg_config { + uint32_t raddr; + uint32_t rdata; +}; + +typedef struct extbhr_t { + uint32_t dramregsoffs; + uint8_t rsrvd1[0x20 - sizeof(uint32_t)]; + struct reg_config rcfg[KWBIMAGE_MAX_CONFIG]; + uint8_t rsrvd2[7]; + uint8_t checkSum; +} extbhr_t, *pextbhr_t; + +struct kwb_header { + bhr_t kwb_hdr; + extbhr_t kwb_exthdr; +}; + +/* + * functions + */ +void init_kwb_image_type (void); + +#endif /* _KWBIMAGE_H_ */ diff --git a/tools/mkimage.c b/tools/mkimage.c index c43b20772..ab6ea32ad 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -148,6 +148,8 @@ main (int argc, char **argv) int retval = 0; struct image_type_params *tparams = NULL; + /* Init Kirkwood Boot image generation/list support */ + init_kwb_image_type (); /* Init FIT image generation/list support */ init_fit_image_type (); /* Init Default image generation/list support */ diff --git a/tools/mkimage.h b/tools/mkimage.h index 96f2ef8f1..ec6733625 100644 --- a/tools/mkimage.h +++ b/tools/mkimage.h @@ -139,6 +139,7 @@ void mkimage_register (struct image_type_params *tparams); * * Supported image types init functions */ +void init_kwb_image_type (void); void init_default_image_type (void); void init_fit_image_type (void); |