aboutsummaryrefslogtreecommitdiff
path: root/doc/README.dk1s10
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-09 23:12:24 +0000
committerwdenk <wdenk>2004-02-09 23:12:24 +0000
commitec4c544bed9b026cdf93084fb0daa73ec53a9cda (patch)
treef34aa12b9723120921bf1b34f10579d7c803f687 /doc/README.dk1s10
parentb98fff1d6acc57cc54f01740028535ac095237cd (diff)
Patches by Stephan Linz, 30 Jan 2004:
1: - board/altera/common/flash.c:flash_erase(): o allow interrupts befor get_timer() call o check-up each erased sector and avoid unexpected timeouts - board/altera/dk1c20/dk1s10.c:board_early_init_f(): o enclose sevenseg_set() in cpp condition - remove the ASMI configuration for DK1S10_standard_32 (never present) - fix some typed in mistakes in the NIOS documentation 2: - split DK1C20 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1C20.h 3: - split DK1S10 configuration into several header files: o two new files for each NIOS CPU description o U-Boot related part is remaining in DK1S10.h 4: - Add support for the Microtronix Linux Development Kit NIOS CPU configuration at the Altera Nios Development Kit, Stratix Edition (DK-1S10) 5: - Add documentation for the Altera Nios Development Kit, Stratix Edition (DK-1S10) 6: - Add support for the Nios Serial Peripharel Interface (SPI) (master only) 7: - Add support for the common U-Boot SPI framework at RTC driver DS1306
Diffstat (limited to 'doc/README.dk1s10')
-rw-r--r--doc/README.dk1s10131
1 files changed, 131 insertions, 0 deletions
diff --git a/doc/README.dk1s10 b/doc/README.dk1s10
new file mode 100644
index 000000000..bb8375a6b
--- /dev/null
+++ b/doc/README.dk1s10
@@ -0,0 +1,131 @@
+
+ Nios Development Kit
+ Startix Editions
+
+ Last Update: January 28, 2004
+====================================================================
+
+This file contains information regarding U-Boot and the Altera
+Nios Development Kit, Startix Edition (DK-1S10). For general Nios
+information see doc/README.nios.
+
+Most stuff of this file was borrowed and based on README.dk1c20,
+the DK-1C20 related information file.
+
+For those interested in contributing ... see HELP WANTED section
+in doc/README.nios.
+
+Contents:
+
+ 1. Files
+ 2. Memory Organization
+ 3. CPU Variations
+ 4. Examples
+ 5. Programming U-Boot into FLASH with GERMS
+
+====================================================================
+
+1. Files
+=========
+ board/altera/dk1s10/*
+ include/configs/DK1S10.h
+
+2. Memory Organization
+=======================
+
+ -The heap is placed below the monitor (U-Boot code).
+ -Global data is placed below the heap.
+ -The stack is placed below global data (&grows down).
+
+3. CPU Variations
+=================
+
+There are more than one NIOS CPU variation for the DK-1S10. U-Boot
+supports the following CPU configurations:
+
+ - Altera Standard 32 (make DK1S10_standard_32_config)
+ - Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
+
+4. Examples
+============
+
+The hello_world example was never tested on DK-1S10. Neverthelse
+it should work as far as possible, because the DK-1S10 port is
+more than ninetieth percents equal to the DK-1C20 port and at
+this platform the hello_world example was already tested
+successfully (see README.dk1c20).
+
+
+5. Programming U-Boot into FLASH with GERMS
+============================================
+The current version of the DK-1S10 port with the default
+configuration settings occupies about 78 KBytes of flash.
+A minimal configuration occupies less than 60 KByte
+(network support disabled).
+
+To program U-Boot into the DK-1S10 flash using GERMS do the
+following:
+
+1. From the command line, download U-Boot using the nios-run:
+
+ $ nios-run -r u-boot.srec
+
+This takes about 45 seconds (GERMS is not very speedy here).
+After u-boot is downloaded it will be executed. You should
+see the following:
+
+ U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
+
+ CPU: Nios-32 Rev. 3.3 (0x3038)
+ Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
+ Board: Altera Nios 1S10 Development Kit
+ In: serial
+ Out: serial
+ Err: serial
+ DK1S10 >
+
+
+2. Quit nios-run and start your terminal application (e.g. start
+ Hyperterminal or minicom).
+
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
+ following:
+
+ a. From the u-boot command prompt start a binary download to
+ SRAM / SDRAM:
+
+ at the Altera Standard 32 to SRAM:
+
+ ==> loadb 800000
+
+ at the Microtronix LDK 2.0 to SDRAM:
+
+ ==> loadb 1010000
+
+ b. Download u-boot.bin using kermit.
+
+4. From the U-Boot command prompt, erase flash:
+
+ at the Altera Standard 32 from 0x40000 to 0x5ffff:
+
+ ==> erase 1:4-5
+
+ at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
+
+ ==> erase 1:0-1
+
+5. Copy the binary image from SRAM / SDRAM to flash:
+
+ at the Altera Standard 32 to SRAM:
+
+ ==> cp.b 800000 40000 $(filesize)
+
+ at the Microtronix LDK 2.0 to SDRAM:
+
+ ==> cp.b 1010000 8000000 $(filesize)
+
+U-Boot will now automatically start when the board is powered on or
+reset using the Standard-32 configuration. To start U-Boot with the
+Safe-32 configuration, enter the following GERMS command:
+
+ + g 40000