aboutsummaryrefslogtreecommitdiff
path: root/common/cmd_i2c.c
diff options
context:
space:
mode:
authorFrans Meulenbroeks <fransmeulenbroeks@gmail.com>2010-02-25 10:12:15 +0100
committerWolfgang Denk <wd@denx.de>2010-03-21 22:44:43 +0100
commitfb0070e9101a1f288d7054f7e80b3d808fd7ead2 (patch)
treec5e76d3657d5253aa4d6e95ff49b6fb5b6d2b3dd /common/cmd_i2c.c
parentbfc3b77ebe68435b46e988e3a440bc4857bc7cf4 (diff)
downloadu-boot-linaro-natty-fb0070e9101a1f288d7054f7e80b3d808fd7ead2.tar.gz
cmd_i2c.c: sorted commands alphabetically
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'common/cmd_i2c.c')
-rw-r--r--common/cmd_i2c.c11
1 files changed, 5 insertions, 6 deletions
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 11ed511bb..b51d0c91c 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1302,25 +1302,24 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
- "speed [speed] - show or set I2C bus speed\n"
#if defined(CONFIG_I2C_MUX)
- "i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\n"
+ "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
#endif /* CONFIG_I2C_MUX */
+ "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
- "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
"i2c reset - re-init the I2C Controller\n"
- "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
#if defined(CONFIG_CMD_SDRAM)
- "\n"
- "i2c sdram chip - print SDRAM configuration information"
+ "i2c sdram chip - print SDRAM configuration information\n"
#endif
+ "i2c speed [speed] - show or set I2C bus speed"
);
#if defined(CONFIG_I2C_MUX)