aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2009-10-29 15:04:35 +0100
committerStefan Roese <sr@denx.de>2009-11-09 11:26:57 +0100
commitb0b867462c569e7accd6f78c942cbab028116ecf (patch)
tree28ff468681f1689d4abf7478eae575d748d04bfa
parent2cd95a25cb0ee8218b271d23d64fb3f719ac5390 (diff)
ppc4xx: Consolidate 4xx PCIe board specific configuration
This patch consolidates the PPC4xx board specific PCIe configuration code. This way the duplicated code is removed. Boards can implement a special, non standard behaviour (e.g. number of PCIe slots, etc) by overriding the weak default functions. Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--board/amcc/canyonlands/canyonlands.c74
-rw-r--r--board/amcc/katmai/katmai.c74
-rw-r--r--board/amcc/kilauea/kilauea.c77
-rw-r--r--board/amcc/makalu/makalu.c67
-rw-r--r--board/amcc/yucca/yucca.c191
-rw-r--r--cpu/ppc4xx/4xx_pcie.c123
-rw-r--r--include/configs/yucca.h8
7 files changed, 172 insertions, 442 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 91fae1917..8ce6788d4 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -383,84 +383,16 @@ int is_pci_host(struct pci_controller *hose)
return (1);
}
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
+int board_pcie_first(void)
{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
- int start;
-
- /*
- * assume we're called after the PCIX hose is initialized, which takes
- * bus ID 0 and therefore start numbering PCIe's from 1.
- */
- bus = busno;
-
/*
* Canyonlands with SATA enabled has only one PCIe slot
* (2nd one).
*/
if (gd->board_type == BOARD_CANYONLANDS_SATA)
- start = 1;
- else
- start = 0;
-
- for (i = start; i <= 1; i++) {
+ return 1;
- if (is_end_point(i))
- ret = ppc4xx_init_pcie_endport(i);
- else
- ret = ppc4xx_init_pcie_rootport(i);
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
+ return 0;
}
#endif /* CONFIG_PCI */
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 908f1a595..34ecd994d 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -351,7 +351,7 @@ int is_pci_host(struct pci_controller *hose)
return 1;
}
-static int katmai_pcie_card_present(int port)
+int board_pcie_card_present(int port)
{
u32 val;
@@ -367,78 +367,6 @@ static int katmai_pcie_card_present(int port)
return 0;
}
}
-
-static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
-
- /*
- * assume we're called after the PCIX hose is initialized, which takes
- * bus ID 0 and therefore start numbering PCIe's from 1.
- */
- bus = busno;
- for (i = 0; i <= 2; i++) {
- /* Check for katmai card presence */
- if (!katmai_pcie_card_present(i))
- continue;
-
- if (is_end_point(i))
- ret = ppc4xx_init_pcie_endport(i);
- else
- ret = ppc4xx_init_pcie_rootport(i);
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
#endif /* defined(CONFIG_PCI) */
#ifdef CONFIG_POST
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index 5cd822a7f..c4f8a6496 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -252,15 +252,19 @@ int board_emac_count(void)
return 2;
}
-static int board_pcie_count(void)
+/*
+ * Override the weak default implementation and return the
+ * last PCIe slot number (max number - 1).
+ */
+int board_pcie_last(void)
{
/*
* 405EXr only has one EMAC interface, 405EX has two
*/
if (is_405exr())
- return 1;
+ return 1 - 1;
else
- return 2;
+ return 2 - 1;
}
int checkboard (void)
@@ -300,73 +304,6 @@ int pci_pre_init(struct pci_controller * hose )
}
#endif /* defined(CONFIG_PCI) */
-#ifdef CONFIG_PCI
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- bus = busno;
- char *env;
- unsigned int delay;
-
- for (i = 0; i < board_pcie_count(); i++) {
-
- if (is_end_point(i))
- ret = ppc4xx_init_pcie_endport(i);
- else
- ret = ppc4xx_init_pcie_rootport(i);
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
-#endif
-
#if defined(CONFIG_POST)
/*
* Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index d4277dda9..43b9bc6ba 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -256,73 +256,6 @@ int pci_pre_init(struct pci_controller * hose )
}
#endif /* defined(CONFIG_PCI) */
-#ifdef CONFIG_PCI
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- bus = busno;
- char *env;
- unsigned int delay;
-
- for (i = 0; i < 2; i++) {
-
- if (is_end_point(i))
- ret = ppc4xx_init_pcie_endport(i);
- else
- ret = ppc4xx_init_pcie_rootport(i);
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
-#endif
-
#if defined(CONFIG_POST)
/*
* Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index d8f4bcbb1..649315581 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -679,7 +679,7 @@ int is_pci_host(struct pci_controller *hose)
return 1;
}
-static int yucca_pcie_card_present(int port)
+int board_pcie_card_present(int port)
{
u16 reg;
@@ -697,185 +697,54 @@ static int yucca_pcie_card_present(int port)
}
/*
- * For the given slot, set rootpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * and turn off reset.
- */
-void yucca_setup_pcie_fpga_rootpoint(int port)
-{
- u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
-
- switch(port) {
- case 0:
- rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
- endpoint = 0;
- power = FPGA_REG1A_PE0_PWRON;
- green_led = FPGA_REG1A_PE0_GLED;
- clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE0_YLED;
- reset_off = FPGA_REG1C_PE0_PERST;
- break;
- case 1:
- rootpoint = 0;
- endpoint = FPGA_REG1C_PE1_ENDPOINT;
- power = FPGA_REG1A_PE1_PWRON;
- green_led = FPGA_REG1A_PE1_GLED;
- clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE1_YLED;
- reset_off = FPGA_REG1C_PE1_PERST;
- break;
- case 2:
- rootpoint = 0;
- endpoint = FPGA_REG1C_PE2_ENDPOINT;
- power = FPGA_REG1A_PE2_PWRON;
- green_led = FPGA_REG1A_PE2_GLED;
- clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE2_YLED;
- reset_off = FPGA_REG1C_PE2_PERST;
- break;
-
- default:
- return;
- }
-
- out_be16((u16 *)FPGA_REG1A,
- ~(power | clock | green_led) &
- (yellow_led | in_be16((u16 *)FPGA_REG1A)));
-
- out_be16((u16 *)FPGA_REG1C,
- ~(endpoint | reset_off) &
- (rootpoint | in_be16((u16 *)FPGA_REG1C)));
- /*
- * Leave device in reset for a while after powering on the
- * slot to give it a chance to initialize.
- */
- udelay(250 * 1000);
-
- out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
-}
-/*
* For the given slot, set endpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * .In end point mode reset bit is read only.
+ * turn on the green LED and turn off the yellow LED, enable the
+ * clock. In end point mode reset bit is read only.
*/
-void yucca_setup_pcie_fpga_endpoint(int port)
+void board_pcie_setup_port(int port, int rootpoint)
{
- u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+ u16 power, clock, green_led, yellow_led,
+ reset_off, rp, ep;
- switch(port) {
+ switch (port) {
case 0:
- rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
- endpoint = 0;
- power = FPGA_REG1A_PE0_PWRON;
- green_led = FPGA_REG1A_PE0_GLED;
- clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE0_YLED;
- reset_off = FPGA_REG1C_PE0_PERST;
+ rp = FPGA_REG1C_PE0_ROOTPOINT;
+ ep = 0;
break;
case 1:
- rootpoint = 0;
- endpoint = FPGA_REG1C_PE1_ENDPOINT;
- power = FPGA_REG1A_PE1_PWRON;
- green_led = FPGA_REG1A_PE1_GLED;
- clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE1_YLED;
- reset_off = FPGA_REG1C_PE1_PERST;
+ rp = 0;
+ ep = FPGA_REG1C_PE1_ENDPOINT;
break;
case 2:
- rootpoint = 0;
- endpoint = FPGA_REG1C_PE2_ENDPOINT;
- power = FPGA_REG1A_PE2_PWRON;
- green_led = FPGA_REG1A_PE2_GLED;
- clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
- yellow_led = FPGA_REG1A_PE2_YLED;
- reset_off = FPGA_REG1C_PE2_PERST;
+ rp = 0;
+ ep = FPGA_REG1C_PE2_ENDPOINT;
break;
default:
return;
}
- out_be16((u16 *)FPGA_REG1A,
- ~(power | clock | green_led) &
- (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+ power = FPGA_REG1A_PWRON_ENCODE(port);
+ green_led = FPGA_REG1A_GLED_ENCODE(port);
+ clock = FPGA_REG1A_REFCLK_ENCODE(port);
+ yellow_led = FPGA_REG1A_YLED_ENCODE(port);
+ reset_off = FPGA_REG1C_PERST_ENCODE(port);
- out_be16((u16 *)FPGA_REG1C,
- ~(rootpoint | reset_off) &
- (endpoint | in_be16((u16 *)FPGA_REG1C)));
-}
+ out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) &
+ (yellow_led | in_be16((u16 *)FPGA_REG1A)));
-static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+ out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) &
+ (rp | in_be16((u16 *)FPGA_REG1C)));
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
+ if (rootpoint) {
+ /*
+ * Leave device in reset for a while after powering on the
+ * slot to give it a chance to initialize.
+ */
+ udelay(250 * 1000);
- /*
- * assume we're called after the PCIX hose is initialized, which takes
- * bus ID 0 and therefore start numbering PCIe's from 1.
- */
- bus = busno;
- for (i = 0; i <= 2; i++) {
- /* Check for yucca card presence */
- if (!yucca_pcie_card_present(i))
- continue;
-
- if (is_end_point(i)) {
- yucca_setup_pcie_fpga_endpoint(i);
- ret = ppc4xx_init_pcie_endport(i);
- } else {
- yucca_setup_pcie_fpga_rootpoint(i);
- ret = ppc4xx_init_pcie_rootport(i);
- }
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
+ out_be16((u16 *)FPGA_REG1C,
+ reset_off | in_be16((u16 *)FPGA_REG1C));
}
}
#endif /* defined(CONFIG_PCI) */
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 19d2c7dd2..c4d9cfed8 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -48,6 +48,129 @@ enum {
LNKW_X8 = 0x8
};
+#if 1 // test-only
+int board_pcie_first(void);
+int board_pcie_last(void);
+static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
+
+/*
+ * Per default, all cards are present, so we need to check if the
+ * link comes up.
+ */
+int __board_pcie_card_present(int port)
+{
+ return 1;
+}
+int board_pcie_card_present(int port)
+ __attribute__((weak, alias("__board_pcie_card_present")));
+
+/*
+ * Some boards have runtime detection of the first and last PCIe
+ * slot used, so let's provide weak default functions for the
+ * common version.
+ */
+int __board_pcie_first(void)
+{
+ return 0;
+}
+int board_pcie_first(void)
+ __attribute__((weak, alias("__board_pcie_first")));
+
+int __board_pcie_last(void)
+{
+ return CONFIG_SYS_PCIE_NR_PORTS - 1;
+}
+int board_pcie_last(void)
+ __attribute__((weak, alias("__board_pcie_last")));
+
+void __board_pcie_setup_port(int port, int rootpoint)
+{
+ /* noting in this weak default implementation */
+}
+void board_pcie_setup_port(int port, int rootpoint)
+ __attribute__((weak, alias("__board_pcie_setup_port")));
+
+void pcie_setup_hoses(int busno)
+{
+ struct pci_controller *hose;
+ int i, bus;
+ int ret = 0;
+ char *env;
+ unsigned int delay;
+ int first = board_pcie_first();
+ int last = board_pcie_last();
+
+ /*
+ * Assume we're called after the PCI(X) hose(s) are initialized,
+ * which takes bus ID 0... and therefore start numbering PCIe's
+ * from the next number.
+ */
+ bus = busno;
+
+ for (i = first; i <= last; i++) {
+ /*
+ * Some boards (e.g. Katmai) can detects via hardware
+ * if a PCIe card is plugged, so let's check this.
+ */
+ if (!board_pcie_card_present(i))
+ continue;
+
+ if (is_end_point(i)) {
+ board_pcie_setup_port(i, 0);
+ ret = ppc4xx_init_pcie_endport(i);
+ } else {
+ board_pcie_setup_port(i, 1);
+ ret = ppc4xx_init_pcie_rootport(i);
+ }
+ if (ret == -ENODEV)
+ continue;
+ if (ret) {
+ printf("PCIE%d: initialization as %s failed\n", i,
+ is_end_point(i) ? "endpoint" : "root-complex");
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ hose->current_busno = bus;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+ if (is_end_point(i)) {
+ ppc4xx_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+ } else {
+ ppc4xx_setup_pcie_rootpoint(hose, i);
+ env = getenv ("pciscandelay");
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
+ if (delay > 5)
+ printf("Warning, expect noticable delay before "
+ "PCIe scan due to 'pciscandelay' value!\n");
+ mdelay(delay * 1000);
+ }
+
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
+ }
+ }
+}
+#endif
+
static int validate_endpoint(struct pci_controller *hose)
{
if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index b165bd7a1..42f880785 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -389,6 +389,11 @@
#define FPGA_REG1A_PE_SELSOURCE_0 0x0002
#define FPGA_REG1A_PE_SELSOURCE_1 0x0001
+#define FPGA_REG1A_GLED_ENCODE(n) (FPGA_REG1A_PE0_GLED >> (n))
+#define FPGA_REG1A_YLED_ENCODE(n) (FPGA_REG1A_PE0_YLED >> (n))
+#define FPGA_REG1A_PWRON_ENCODE(n) (FPGA_REG1A_PE0_PWRON >> (n))
+#define FPGA_REG1A_REFCLK_ENCODE(n) (FPGA_REG1A_PE0_REFCLK_ENABLE >> (n))
+
/*----------------------------------------------------------------------------+
| PCIe Miscellaneous
+----------------------------------------------------------------------------*/
@@ -407,6 +412,9 @@
#define FPGA_REG1C_PE1_PERST 0x0008
#define FPGA_REG1C_PE2_PERST 0x0004
+#define FPGA_REG1C_ROOTPOINT_ENCODE(n) (FPGA_REG1C_PE0_ROOTPOINT >> (n))
+#define FPGA_REG1C_PERST_ENCODE(n) (FPGA_REG1C_PE0_PERST >> (n))
+
/*----------------------------------------------------------------------------+
| Defines
+----------------------------------------------------------------------------*/