/* * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) * * (c) Copyright 2006-2007 Wim Van Sebroeck . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor * provide warranty for any of this software. This material is * provided "AS-IS" and at no charge. * * The TCO watchdog is implemented in the following I/O controller hubs: * (See the intel documentation on http://developer.intel.com.) * 82801AA (ICH) : document number 290655-003, 290677-014, * 82801AB (ICHO) : document number 290655-003, 290677-014, * 82801BA (ICH2) : document number 290687-002, 298242-027, * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, * 82801CA (ICH3-S) : document number 290733-003, 290739-013, * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, * 82801DB (ICH4) : document number 290744-001, 290745-020, * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, * 82801E (C-ICH) : document number 273599-001, 273645-002, * 82801EB (ICH5) : document number 252516-001, 252517-003, * 82801ER (ICH5R) : document number 252516-001, 252517-003, * 82801FB (ICH6) : document number 301473-002, 301474-007, * 82801FR (ICH6R) : document number 301473-002, 301474-007, * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, * 82801FW (ICH6W) : document number 301473-001, 301474-007, * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, * 82801GB (ICH7) : document number 307013-002, 307014-009, * 82801GR (ICH7R) : document number 307013-002, 307014-009, * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, * 82801HB (ICH8) : document number 313056-003, 313057-009, * 82801HR (ICH8R) : document number 313056-003, 313057-009, * 82801HBM (ICH8M) : document number 313056-003, 313057-009, * 82801HH (ICH8DH) : document number 313056-003, 313057-009, * 82801HO (ICH8DO) : document number 313056-003, 313057-009, * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, * 82801IB (ICH9) : document number 316972-001, 316973-001, * 82801IR (ICH9R) : document number 316972-001, 316973-001, * 82801IH (ICH9DH) : document number 316972-001, 316973-001, * 6300ESB (6300ESB) : document number 300641-003, 300884-010, * 631xESB (631xESB) : document number 313082-001, 313075-005, * 632xESB (632xESB) : document number 313082-001, 313075-005 */ /* * Includes, defines, variables, module parameters, ... */ /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.02" #define DRV_RELDATE "26-Jul-2007" #define PFX DRV_NAME ": " /* Includes */ #include /* For module specific items */ #include /* For new moduleparam's */ #include /* For standard types (like size_t) */ #include /* For the -ENODEV/... values */ #include /* For printk/panic/... */ #include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ #include /* For the watchdog specific items */ #include /* For __init/__exit/... */ #include /* For file operations */ #include /* For platform_driver framework */ #include /* For pci functions */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ #include /* For copy_to_user/put_user/... */ #include /* For inb/outb/... */ /* TCO related info */ enum iTCO_chipsets { TCO_ICH = 0, /* ICH */ TCO_ICH0, /* ICH0 */ TCO_ICH2, /* ICH2 */ TCO_ICH2M, /* ICH2-M */ TCO_ICH3, /* ICH3-S */ TCO_ICH3M, /* ICH3-M */ TCO_ICH4, /* ICH4 */ TCO_ICH4M, /* ICH4-M */ TCO_CICH, /* C-ICH */ TCO_ICH5, /* ICH5 & ICH5R */ TCO_6300ESB, /* 6300ESB */ TCO_ICH6, /* ICH6 & ICH6R */ TCO_ICH6M, /* ICH6-M */ TCO_ICH6W, /* ICH6W & ICH6RW */ TCO_ICH7, /* ICH7 & ICH7R */ TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ TCO_ICH8M, /* ICH8M */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ TCO_631XESB, /* 631xESB/632xESB */ }; static struct { char *name; unsigned int iTCO_version; } iTCO_chipset_info[] __devinitdata = { {"ICH", 1}, {"ICH0", 1}, {"ICH2", 1}, {"ICH2-M", 1}, {"ICH3-S", 1}, {"ICH3-M", 1}, {"ICH4", 1}, {"ICH4-M", 1}, {"C-ICH", 1}, {"ICH5 or ICH5R", 1}, {"6300ESB", 1}, {"ICH6 or ICH6R", 2}, {"ICH6-M", 2}, {"ICH6W or ICH6RW", 2}, {"ICH7 or ICH7R", 2}, {"ICH7-M", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, {"ICH8M", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, {"631xESB/632xESB", 2}, {NULL,0} }; #define ITCO_PCI_DEVICE(dev, data) \ .vendor = PCI_VENDOR_ID_INTEL, \ .device = dev, \ .subvendor = PCI_ANY_ID, \ .subdevice = PCI_ANY_ID, \ .class = 0, \ .class_mask = 0, \ .driver_data = data /* * This data only exists for exporting the supported PCI ids * via MODULE_DEVICE_TABLE. We do not actually register a * pci_driver, because the I/O Controller Hub has also other * functions that probably will be registered by other drivers. */ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )}, { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2673, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2674, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2675, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2676, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2677, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2678, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2679, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267a, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267b, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267c, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ #define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */ #define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */ #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ #define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ #define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ #define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ #define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ /* internal variables */ static unsigned long is_active; static char expect_release; static struct { /* this is private data for the iTCO_wdt device */ unsigned int iTCO_version; /* TCO version/generation */ unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */ spinlock_t io_lock; /* the lock for io operations */ struct pci_dev *pdev; /* the PCI-device */ } iTCO_wdt_private; static struct platform_device *iTCO_wdt_platform_device; /* the watchdog platform device */ /* module parameters */ #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 0 = The TCO timer is enabled to count */ val = inw(TCO1_CNT); val &= 0xf7ff; outw(val, TCO1_CNT); val = inw(TCO1_CNT); spin_unlock(&iTCO_wdt_private.io_lock); if (val & 0x0800) return -1; return 0; } static int iTCO_wdt_stop(void) { unsigned int val; spin_lock(&iTCO_wdt_private.io_lock); iTCO_vendor_pre_stop(iTCO_wdt_private.ACPIBASE); /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ val = inw(TCO1_CNT); val |= 0x0800; outw(val, TCO1_CNT); val = inw(TCO1_CNT); /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); spin_unlock(&iTCO_wdt_private.io_lock); if ((val & 0x0800) == 0) return -1; return 0; } static int iTCO_wdt_keepalive(void) { spin_lock(&iTCO_wdt_private.io_lock); iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat); /* Reload the timer by writing to the TCO Timer Counter register */ if (iTCO_wdt_private.iTCO_version == 2) { outw(0x01, TCO_RLD); } else if (iTCO_wdt_private.iTCO_version == 1) { outb(0x01, TCO_RLD); } spin_unlock(&iTCO_wdt_private.io_lock); return 0; } static int iTCO_wdt_set_heartbeat(int t) { unsigned int val16; unsigned char val8; unsigned int tmrval; tmrval = seconds_to_ticks(t); /* from the specs: */ /* "Values of 0h-3h are ignored and should not be attempted" */ if (tmrval < 0x04) return -EINVAL; if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) || ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) return -EINVAL; iTCO_vendor_pre_set_heartbeat(tmrval); /* Write new heartbeat to watchdog */ if (iTCO_wdt_private.iTCO_version == 2) { spin_lock(&iTCO_wdt_private.io_lock); val16 = inw(TCOv2_TMR); val16 &= 0xfc00; val16 |= tmrval; outw(val16, TCOv2_TMR); val16 = inw(TCOv2_TMR); spin_unlock(&iTCO_wdt_private.io_lock); if ((val16 & 0x3ff) != tmrval) return -EINVAL; } else if (iTCO_wdt_private.iTCO_version == 1) { spin_lock(&iTCO_wdt_private.io_lock); val8 = inb(TCOv1_TMR); val8 &= 0xc0; val8 |= (tmrval & 0xff); outb(val8, TCOv1_TMR); val8 = inb(TCOv1_TMR); spin_unlock(&iTCO_wdt_private.io_lock); if ((val8 & 0x3f) != tmrval) return -EINVAL; } heartbeat = t; return 0; } static int iTCO_wdt_get_timeleft (int *time_left) { unsigned int val16; unsigned char val8; /* read the TCO Timer */ if (iTCO_wdt_private.iTCO_version == 2) { spin_lock(&iTCO_wdt_private.io_lock); val16 = inw(TCO_RLD); val16 &= 0x3ff; spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val16 * 6) / 10; } else if (iTCO_wdt_private.iTCO_version == 1) { spin_lock(&iTCO_wdt_private.io_lock); val8 = inb(TCO_RLD); val8 &= 0x3f; spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val8 * 6) / 10; } else return -EINVAL; return 0; } /* * /dev/watchdog handling */ static int iTCO_wdt_open (struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ if (test_and_set_bit(0, &is_active)) return -EBUSY; /* * Reload and activate timer */ iTCO_wdt_keepalive(); iTCO_wdt_start(); return nonseekable_open(inode, file); } static int iTCO_wdt_release (struct inode *inode, struct file *file) { /* * Shut off the timer. */ if (expect_release == 42) { iTCO_wdt_stop(); } else { printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); iTCO_wdt_keepalive(); } clear_bit(0, &is_active); expect_release = 0; return 0; } static ssize_t iTCO_wdt_write (struct file *file, const char __user *data, size_t len, loff_t * ppos) { /* See if we got the magic character 'V' and reload the timer */ if (len) { if (!nowayout) { size_t i; /* note: just in case someone wrote the magic character * five months ago... */ expect_release = 0; /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; if (get_user(c, data+i)) return -EFAULT; if (c == 'V') expect_release = 42; } } /* someone wrote to us, we should reload the timer */ iTCO_wdt_keepalive(); } return len; } static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int new_options, retval = -EINVAL; int new_heartbeat; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = DRV_NAME, }; switch (cmd) { case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof (ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: iTCO_wdt_keepalive(); return 0; case WDIOC_SETOPTIONS: { if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { iTCO_wdt_stop(); retval = 0; } if (new_options & WDIOS_ENABLECARD) { iTCO_wdt_keepalive(); iTCO_wdt_start(); retval = 0; } return retval; } case WDIOC_SETTIMEOUT: { if (get_user(new_heartbeat, p)) return -EFAULT; if (iTCO_wdt_set_heartbeat(new_heartbeat)) return -EINVAL; iTCO_wdt_keepalive(); /* Fall */ } case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); case WDIOC_GETTIMELEFT: { int time_left; if (iTCO_wdt_get_timeleft(&time_left)) return -EINVAL; return put_user(time_left, p); } default: return -ENOTTY; } } /* * Kernel Interfaces */ static const struct file_operations iTCO_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = iTCO_wdt_write, .ioctl = iTCO_wdt_ioctl, .open = iTCO_wdt_open, .release = iTCO_wdt_release, }; static struct miscdevice iTCO_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &iTCO_wdt_fops, }; /* * Init & exit routines */ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev) { int ret; u32 base_address; unsigned long RCBA; unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base * for the TCO registers (TCOBASE=ACPIBASE + 0x60) * ACPIBASE is bits [15:7] from 0x40-0x43 */ pci_read_config_dword(pdev, 0x40, &base_address); base_address &= 0x0000ff80; if (base_address == 0x00000000) { /* Something's wrong here, ACPIBASE has to be set */ printk(KERN_ERR PFX "failed to get TCOBASE address\n"); pci_dev_put(pdev); return -ENODEV; } iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version; iTCO_wdt_private.ACPIBASE = base_address; iTCO_wdt_private.pdev = pdev; /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */ /* To get access to it you have to read RCBA from PCI Config space 0xf0 and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */ if (iTCO_wdt_private.iTCO_version == 2) { pci_read_config_dword(pdev, 0xf0, &base_address); RCBA = base_address & 0xffffc000; iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4); } /* Check chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ goto out; } /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); /* Set the TCO_EN bit in SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", SMI_EN ); ret = -EIO; goto out; } val32 = inl(SMI_EN); val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ outl(val32, SMI_EN); release_region(SMI_EN, 4); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) { printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; goto out; } printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", iTCO_chipset_info[ent->driver_data].name, iTCO_chipset_info[ent->driver_data].iTCO_version, TCOBASE); /* Clear out the (probably old) status */ outb(0, TCO1_STS); outb(3, TCO2_STS); /* Make sure the watchdog is not running */ iTCO_wdt_stop(); /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (iTCO_wdt_set_heartbeat(heartbeat)) { iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); printk(KERN_INFO PFX "heartbeat value must be 2"); MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);