From d2b21f191753abd12c4063776cb1a3d635397509 Mon Sep 17 00:00:00 2001 From: Colin McCabe Date: Fri, 9 Jan 2009 14:58:09 -0800 Subject: libertas: if_spi, driver for libertas GSPI devices Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe Signed-off-by: Andrey Yurovsky Acked-by: Dan Williams Signed-off-by: John W. Linville --- include/linux/spi/libertas_spi.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/spi/libertas_spi.h (limited to 'include/linux/spi') diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h new file mode 100644 index 00000000000..ada71b4f378 --- /dev/null +++ b/include/linux/spi/libertas_spi.h @@ -0,0 +1,25 @@ +/* + * board-specific data for the libertas_spi driver. + * + * Copyright 2008 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#ifndef _LIBERTAS_SPI_H_ +#define _LIBERTAS_SPI_H_ +struct libertas_spi_platform_data { + /* There are two ways to read data from the WLAN module's SPI + * interface. Setting 0 or 1 here controls which one is used. + * + * Usually you want to set use_dummy_writes = 1. + * However, if that doesn't work or if you are using a slow SPI clock + * speed, you may want to use 0 here. */ + u16 use_dummy_writes; + + /* GPIO number to use as chip select */ + u16 gpio_cs; +}; +#endif -- cgit v1.2.3