From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- drivers/power/pda_power.c | 89 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 77 insertions(+), 12 deletions(-) (limited to 'drivers/power') diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index b56a704409d..a232de6a570 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -12,11 +12,14 @@ #include #include +#include #include #include #include +#include #include #include +#include static inline unsigned int get_irq_flags(struct resource *res) { @@ -35,6 +38,11 @@ static struct timer_list supply_timer; static struct timer_list polling_timer; static int polling; +#ifdef CONFIG_USB_OTG_UTILS +static struct otg_transceiver *transceiver; +#endif +static struct regulator *ac_draw; + enum { PDA_PSY_OFFLINE = 0, PDA_PSY_ONLINE = 1, @@ -104,18 +112,35 @@ static void update_status(void) static void update_charger(void) { - if (!pdata->set_charge) - return; - - if (new_ac_status > 0) { - dev_dbg(dev, "charger on (AC)\n"); - pdata->set_charge(PDA_POWER_CHARGE_AC); - } else if (new_usb_status > 0) { - dev_dbg(dev, "charger on (USB)\n"); - pdata->set_charge(PDA_POWER_CHARGE_USB); - } else { - dev_dbg(dev, "charger off\n"); - pdata->set_charge(0); + static int regulator_enabled; + int max_uA = pdata->ac_max_uA; + + if (pdata->set_charge) { + if (new_ac_status > 0) { + dev_dbg(dev, "charger on (AC)\n"); + pdata->set_charge(PDA_POWER_CHARGE_AC); + } else if (new_usb_status > 0) { + dev_dbg(dev, "charger on (USB)\n"); + pdata->set_charge(PDA_POWER_CHARGE_USB); + } else { + dev_dbg(dev, "charger off\n"); + pdata->set_charge(0); + } + } else if (ac_draw) { + if (new_ac_status > 0) { + regulator_set_current_limit(ac_draw, max_uA, max_uA); + if (!regulator_enabled) { + dev_dbg(dev, "charger on (AC)\n"); + regulator_enable(ac_draw); + regulator_enabled = 1; + } + } else { + if (regulator_enabled) { + dev_dbg(dev, "charger off\n"); + regulator_disable(ac_draw); + regulator_enabled = 0; + } + } } } @@ -194,6 +219,13 @@ static void polling_timer_func(unsigned long unused) jiffies + msecs_to_jiffies(pdata->polling_interval)); } +#ifdef CONFIG_USB_OTG_UTILS +static int otg_is_usb_online(void) +{ + return (transceiver->state == OTG_STATE_B_PERIPHERAL); +} +#endif + static int pda_power_probe(struct platform_device *pdev) { int ret = 0; @@ -227,6 +259,9 @@ static int pda_power_probe(struct platform_device *pdev) if (!pdata->polling_interval) pdata->polling_interval = 2000; + if (!pdata->ac_max_uA) + pdata->ac_max_uA = 500000; + setup_timer(&charger_timer, charger_timer_func, 0); setup_timer(&supply_timer, supply_timer_func, 0); @@ -240,6 +275,13 @@ static int pda_power_probe(struct platform_device *pdev) pda_psy_usb.num_supplicants = pdata->num_supplicants; } + ac_draw = regulator_get(dev, "ac_draw"); + if (IS_ERR(ac_draw)) { + dev_dbg(dev, "couldn't get ac_draw regulator\n"); + ac_draw = NULL; + ret = PTR_ERR(ac_draw); + } + if (pdata->is_ac_online) { ret = power_supply_register(&pdev->dev, &pda_psy_ac); if (ret) { @@ -261,6 +303,13 @@ static int pda_power_probe(struct platform_device *pdev) } } +#ifdef CONFIG_USB_OTG_UTILS + transceiver = otg_get_transceiver(); + if (transceiver && !pdata->is_usb_online) { + pdata->is_usb_online = otg_is_usb_online; + } +#endif + if (pdata->is_usb_online) { ret = power_supply_register(&pdev->dev, &pda_psy_usb); if (ret) { @@ -300,10 +349,18 @@ usb_irq_failed: usb_supply_failed: if (pdata->is_ac_online && ac_irq) free_irq(ac_irq->start, &pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif ac_irq_failed: if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); ac_supply_failed: + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); init_failed: @@ -327,6 +384,14 @@ static int pda_power_remove(struct platform_device *pdev) power_supply_unregister(&pda_psy_usb); if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); +#ifdef CONFIG_USB_OTG_UTILS + if (transceiver) + otg_put_transceiver(transceiver); +#endif + if (ac_draw) { + regulator_put(ac_draw); + ac_draw = NULL; + } if (pdata->exit) pdata->exit(dev); -- cgit v1.2.3