From 8ec93459655a3618dedec6360bb28d63f0010ef6 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 4 May 2006 05:59:41 -0400 Subject: spidernet: enable support for bcm5461 ethernet phy A newer board revision changed the type of ethernet phy. Moreover, this generalizes the way that a phy gets switched into fiber mode when autodetection is not available. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann Signed-off-by: Stephen Hemminger --- drivers/net/sungem_phy.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'drivers/net/sungem_phy.c') diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 046371ee5bb..b2ddd5e7930 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy* phy) return 0; } +static int bcm5421_enable_fiber(struct mii_phy* phy) +{ + /* enable fiber mode */ + phy_write(phy, MII_NCONFIG, 0x9020); + /* LEDs active in both modes, autosense prio = fiber */ + phy_write(phy, MII_NCONFIG, 0x945f); + + /* switch off fibre autoneg */ + phy_write(phy, MII_NCONFIG, 0xfc01); + phy_write(phy, 0x0b, 0x0004); + + return 0; +} + +static int bcm5461_enable_fiber(struct mii_phy* phy) +{ + phy_write(phy, MII_NCONFIG, 0xfc0c); + phy_write(phy, MII_BMCR, 0x4140); + phy_write(phy, MII_NCONFIG, 0xfc0b); + phy_write(phy, MII_BMCR, 0x0140); + + return 0; +} + static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise) { u16 ctl, adv; @@ -762,6 +786,7 @@ static struct mii_phy_ops bcm5421_phy_ops = { .setup_forced = bcm54xx_setup_forced, .poll_link = genmii_poll_link, .read_link = bcm54xx_read_link, + .enable_fiber = bcm5421_enable_fiber, }; static struct mii_phy_def bcm5421_phy_def = { @@ -792,6 +817,25 @@ static struct mii_phy_def bcm5421k2_phy_def = { .ops = &bcm5421k2_phy_ops }; +static struct mii_phy_ops bcm5461_phy_ops = { + .init = bcm5421_init, + .suspend = generic_suspend, + .setup_aneg = bcm54xx_setup_aneg, + .setup_forced = bcm54xx_setup_forced, + .poll_link = genmii_poll_link, + .read_link = bcm54xx_read_link, + .enable_fiber = bcm5461_enable_fiber, +}; + +static struct mii_phy_def bcm5461_phy_def = { + .phy_id = 0x002060c0, + .phy_id_mask = 0xfffffff0, + .name = "BCM5461", + .features = MII_GBIT_FEATURES, + .magic_aneg = 1, + .ops = &bcm5461_phy_ops +}; + /* Broadcom BCM 5462 built-in Vesta */ static struct mii_phy_ops bcm5462V_phy_ops = { .init = bcm5421_init, @@ -857,6 +901,7 @@ static struct mii_phy_def* mii_phy_table[] = { &bcm5411_phy_def, &bcm5421_phy_def, &bcm5421k2_phy_def, + &bcm5461_phy_def, &bcm5462V_phy_def, &marvell_phy_def, &genmii_phy_def, -- cgit v1.2.3