aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2011-12-04SAUCE: skip resume soc-audio device without codecsEric Miao
BugLink: http://bugs.launchpad.net/bugs/882723 There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: remove unnecessary suspend/resume functions from mxc_spdifEric Miao
BugLink: http://bugs.launchpad.net/bugs/882723 Disabling/re-enabling clocks is not necessary as it's done in *_startup() and *_shutdown() functions, and shall be performed during suspend/resume. This is causing warnings of un-matched clk_enable()/clk_disable() Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: mxc_spdif: spdif gets clock from spdif streamAlan Tull
BugLink: http://bugs.launchpad.net/bugs/880632 The S/PDIF block's DPLL recovers the clock from the input bitstream. Signed-off-by: Alan Tull <alan.tull@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: ENGR00158176 SGTL5000: I/O Error appeared when recording mono wav ↵Lionel Xu
through HW BugLink: http://bugs.launchpad.net/bugs/856933 When recording mono wav, SSI's network mode should be closed, or it will influence the internal freq config, making recording fail. Signed-off-by: Lionel Xu <Lionel.Xu@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: fix imx_pcm_new() to allocate dma buffer correctlyEric Miao
BugLink: http://bugs.launchpad.net/bugs/877165 imx_pcm_new() calls imx_pcm_preallocate_dma_buffer() to allocate dma buffers according _only_ to cpu_dai parameters, and this is not true. A better way is to check out both cpu_dai and codec_dai. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: set correct rates before registering SPDIF codec DAIEric Miao
BugLink: http://bugs.launchpad.net/bugs/855281 Playback/capture rates should be configured before the SPDIF codec DAI is registered, according to the parameters that passed in by the platform data. And this caused pulseaudio not working with the SPDIF sound card. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: adjust sgtl5000 and S/PDIF orderEric Miao
BugLink: http://bugs.launchpad.net/bugs/857057 After adding support for S/PDIF audio output routing to HDMI, the SGTL5000 became card #1, which was no longer #0, thus making it no longer the default ALSA card. imx_sgtl5000_init() doesn't need to be late_initcall(), module_init() works just all right. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: ENGR00139461-2 mxc alsa soc spdif driverAlan Tull
BugLink: http://bugs.launchpad.net/bugs/837155 S/PDIF tx and rx using ASoC layer. Signed-off-by: Alan Tull <alan.tull@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04SAUCE: sgtl5000: fix power on/off of MIC biasLionel Xu
BugLink: http://bugs.launchpad.net/bugs/837797 There is no sound in the recorded wav, to enable recording, the VAG should be powered up, and the mic bias resistor should be setup with proper value. Original patch subject: ENGR00156813 MX53 ALSA: Recording no sound Signed-off-by: Lionel Xu <lionel.xu@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04sound: change IMX_DMATYPE_SSI to IMX_DMATYPE_SSI_SPEric Miao
Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04sound: add imx-sgtl5000Eric Miao
Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-04ASoC: sgtl5000: rename dac_mux to hp_muxEric Miao
The DAC mux is actually a mux selection for the headphone output. Renaming it to hp_mux will make this clearer. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-01Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-11-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda - Fix jack-detection control of VT1708 ALSA: hda - cut and paste typo in cs420x_models[] ALSA: hda/realtek - Minor cleanup ALSA: hda/realtek - Fix missing inits of item indices for auto-mic ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config() ALSA: hda - fail ELD reading early ALSA: lx6464es - fix device communication via command bus ALSA: lx6464es - command buffer API cleanup ALSA: hda - repoll ELD content for multiple times ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards ASoC: Ensure WM8731 register cache is synced when resuming from disabled ALSA: cs5535 - Fix an endianness conversion ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls ASoC: wm_hubs: fix DB_RANGE size ASoC: wm9090: fix DB_RANGE size ASoC: wm8993: fix DB_RANGE size ASoC: wm8962: fix DB_RANGE size ASoC: sgtl5000: fix DB_RANGE size ASoC: rt5631: fix DB_RANGE size ...
2011-11-27Merge branch 'fix/hda' into for-linusTakashi Iwai
2011-11-27ALSA: hda - Fix jack-detection control of VT1708Takashi Iwai
VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-27ALSA: hda - cut and paste typo in cs420x_models[]Dan Carpenter
The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-26ARM: 7175/1: add subname parameter to mfp_set_groupg callersAxel Lin
commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-11-23ALSA: hda/realtek - Minor cleanupTakashi Iwai
Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda/realtek - Fix missing inits of item indices for auto-micTakashi Iwai
When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko <dion@inhex.net> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecsTakashi Iwai
The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-23ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config()Takashi Iwai
In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: hda - fail ELD reading earlyWu Fengguang
With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: lx6464es - fix device communication via command busTim Blechmann
commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann <tim@klingt.org> LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: lx6464es - command buffer API cleanupTim Blechmann
the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: hda - repoll ELD content for multiple timesWu Fengguang
Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-22ALSA: hdspm - Fix PCI ID for PCIe RME MADI cardsAdrian Knoth
Commit c09403dcc5698abf214329fbbf3cf8dbb5558bea has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-21ASoC: Ensure WM8731 register cache is synced when resuming from disabledMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-11-21Merge branch 'DB_RANGE-size-fixes' of ↵Mark Brown
git://git.alsa-project.org/alsa-kprivate into for-3.2
2011-11-21ALSA: cs5535 - Fix an endianness conversionDan Carpenter
desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-20ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits callsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-20ASoC: wm_hubs: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: wm9090: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: wm8993: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: wm8962: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: sgtl5000: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: rt5631: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent the last entry from being omitted. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-20ASoC: adau1373: fix DB_RANGE sizeClemens Ladisch
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2011-11-19ALSA: hda - Add pin fix for Alienware M17x R3Takashi Iwai
Reported-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs ALSA: hda - Update URLs in document ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld() ALSA: hda - delayed ELD repoll ALSA: hda - fix ELD memory leak ALSA: hda/realtek: remove redundant semicolon ALSA: hda - pwr_nids cleanup for IDT codecs
2011-11-17ASoC: wm8753: Skip noop reconfiguration of DAI modeTimo Juhani Lindfors
This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-11-16ALSA: hda - Fix the connection selection of ADCs on Cirrus codecsTakashi Iwai
spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld()Wu Fengguang
It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - delayed ELD repollWu Fengguang
The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - fix ELD memory leakWu Fengguang
memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: <stable@kernel.org> Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-15ASoC: fsl_ssi: properly initialize the sysfs attribute objectTimur Tabi
Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-14ASoC: sta32x: preserve coefficient RAMJohannes Stezenbach
The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-11-14ALSA: hda/realtek: remove redundant semicolonJesper Juhl
Having just one semicolon after a break statement is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-12Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/kvm: Fix build failure with HV KVM and CBE powerpc/ps3: Fix lv1_gpu_attribute hcall powerpc/ps3: Fix PS3 repository build warnings powerpc/ps3: irq: Remove IRQF_DISABLED powerpc/irq: Remove IRQF_DISABLED powerpc/numa: NUMA topology support for PowerNV powerpc: Add System RAM to /proc/iomem powerpc: Add KVM as module to defconfigs powerpc/kvm: Fix build with older toolchains powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. powerpc/5200: add support for charon board
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-24 04:54:22 +0000