aboutsummaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-10-18SAUCE: fix imx_pcm_new() to allocate dma buffer correctlylt-3.1-2011.10-0Eric Miao
BugLink: http://bugs.launchpad.net/bugs/877165 imx_pcm_new() calls imx_pcm_preallocate_dma_buffer() to allocate dma buffers according _only_ to cpu_dai parameters, and this is not true. A better way is to check out both cpu_dai and codec_dai. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-18SAUCE: set correct rates before registering SPDIF codec DAIEric Miao
BugLink: http://bugs.launchpad.net/bugs/855281 Playback/capture rates should be configured before the SPDIF codec DAI is registered, according to the parameters that passed in by the platform data. And this caused pulseaudio not working with the SPDIF sound card. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-18SAUCE: adjust sgtl5000 and S/PDIF orderEric Miao
BugLink: http://bugs.launchpad.net/bugs/857057 After adding support for S/PDIF audio output routing to HDMI, the SGTL5000 became card #1, which was no longer #0, thus making it no longer the default ALSA card. imx_sgtl5000_init() doesn't need to be late_initcall(), module_init() works just all right. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-18SAUCE: ENGR00139461-2 mxc alsa soc spdif driverAlan Tull
BugLink: http://bugs.launchpad.net/bugs/837155 S/PDIF tx and rx using ASoC layer. Signed-off-by: Alan Tull <alan.tull@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-16SAUCE: sgtl5000: fix power on/off of MIC biasLionel Xu
BugLink: http://bugs.launchpad.net/bugs/837797 There is no sound in the recorded wav, to enable recording, the VAG should be powered up, and the mic bias resistor should be setup with proper value. Original patch subject: ENGR00156813 MX53 ALSA: Recording no sound Signed-off-by: Lionel Xu <lionel.xu@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-14sound: change IMX_DMATYPE_SSI to IMX_DMATYPE_SSI_SPEric Miao
Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-14sound: add imx-sgtl5000Eric Miao
Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-14ASoC: sgtl5000: rename dac_mux to hp_muxEric Miao
The DAC mux is actually a mux selection for the headphone output. Renaming it to hp_mux will make this clearer. Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-10-02ASoC: omap_mcpdm_remove cannot be __devexitArnd Bergmann
omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADCAxel Lin
Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-02ASoC: use a valid device for dev_err() in ZyloniteArnd Bergmann
A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-23ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is activeJarkko Nikula
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37. CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream. This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON(). Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-21ASoC: Ensure we generate a driver nameMark Brown
Commit 873bd4c (ASoC: Don't set invalid name string to snd_card->driver field) broke generation of a driver name for all ASoC cards relying on the automatic generation of one. Fix this by using the old default with spaces replaced by underscores. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Takashi Iwai <tiwai@suse.de>
2011-09-20ASoC: Remove bitrotted wm8962_resume()Mark Brown
This functionality is now subsumed within the bias management, using the standard cache management functionality, without assuming the cache type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-16ASoC: bf5xx-ad73311: Fix prototype for bf5xx_probeAxel Lin
Fix below build warning: sound/soc/blackfin/bf5xx-ad73311.c: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-12ASoC: Fix trivial build regression in Kirkwood I2SArnd Bergmann
A fix merged in 3.1-rc2 introduced a small regression, this should get it to build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-05ASoC: Blackfin: bf5xx-ad193x: Fix codec device nameLars-Peter Clausen
Fix the codec_name field of the dai_link to match the actual device name of the codec. Otherwise the card won't be instantiated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-05ASoC: Fix reporting of partial jack updatesMark Brown
We need to report the entire jack state to the core jack code, not just the bits that were being updated by the caller, otherwise the status reported by other detection methods will be omitted from the state seen by userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-08-31ASoC: imx: Fix build warning of unused 'card' variableFabio Estevam
Fixes the following warning: CC sound/soc/imx/imx-pcm-fiq.o sound/soc/imx/imx-pcm-fiq.c: In function 'imx_pcm_fiq_new': sound/soc/imx/imx-pcm-fiq.c:243: warning: unused variable 'card' CC sound/soc/imx/imx-pcm-dma-mx2.o Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: Fix register cache sync register_writable WARN_ONsLars-Peter Clausen
Currently the condition for these WARN_ONs is reversed and they are placed before the actual check whether we are going to write to that register. So if the codec implements the register_writable callback we'll get a warning for each writable register when syncing the register cache. While we are at it change the check to use snd_soc_codec_writable_register instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: snd_soc_codec_{readable,writable}_register change default to trueLars-Peter Clausen
Change the default return value of snd_soc_codec_{readable,writable}_register to true when no codec specific callback for this function is given. Otherwise all registers of that codec will neither be readable nor writable, which is most certainly not what we want. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: soc-dapm: Fix parameter comment for snd_soc_dapm_freePeter Ujfalusi
We have dapm_context instead of codec parameter. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24ASoC: MPC5200: replace of_device with platform_deviceTimur Tabi
'struct of_device' no longer exists, and its functionality has been merged into platform_device. Update the MPC5200 audio DMA driver (mpc5200_dma) accordingly. This fixes a build break. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-24ASoC: Correct element count for WM8996 sidetone HPFMark Brown
I can count. Honest. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-24ASoC: Tegra: wm8903 machine driver: Drop Ventana supportStephen Warren
Board file support for Ventana is not yet mainlined, and probably won't ever be given the move to Device-Tree. Consequently, the Ventana entry is being removed from arch/arm/tools/mach-types in the next merge window, since it was registered over a year ago. This will also remove function machine_is_ventana(), which is used by the ASoC Tegra WM8903 machine driver. This will cause compilation failures. Drop Ventana support to resolve this. Hopefully, in the not-too-distant future, tegra_wm8903.c will be able to configure itself from Device-Tree, and hence we'll be able to re-instate Ventana support just by creating a .dts file for the board. Also note that Aebl support is in a similar boat. However, that board isn't scheduled for deprecation for at least another 5 months, and perhaps we will have completely removed non-Device-Tree support from tegra_wm8903.c by then and/or adjusted mach-types policy. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24ASoC: Add Springbank I/O card to Speyside KconfigJoseph Pentland
Signed-off-by: Joseph Pentland <jp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/fsl/mpc8610_hpcd.c: add missing of_node_putJulia Lawall
The first change is to add an of_node_put, since codec_np has previously been allocated. The rest of the patch reorganizes the error handling code so the only code executed is that which is needed. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != of_node_put(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 of_node_put(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/fsl/p1022_ds.c: add missing of_node_putJulia Lawall
dma_channel_np has been accessed at this point, so decrease its reference count before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != of_node_put(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 of_node_put(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/ep93xx/ep93xx-i2s.c: add missing kfreeJulia Lawall
Introduce a new label that includes kfree and jump to that one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/kirkwood/kirkwood-i2s.c: add missing kfreeJulia Lawall
Adjust the goto to jump to the error handling code that includes kfree. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22ASoC: soc-core: use GFP_KERNEL flag for kmalloc in snd_soc_cnewAxel Lin
GFP_ATOMIC is not needed here, use GFP_KERNEL instead. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/fsl/fsl_dma.c: add missing of_node_putTimur Tabi
of_parse_phandle increments the reference count of np, so this should be decremented before trying the next possibility. Since we don't actually use np, we can decrement the reference count immediately. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22ASoC: Clear completions from late WM8996 FLL lock IRQsMark Brown
In case we have a pending completion, for example due to a problem with the input clock which got corrected after we timed out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Clear any outstanding WM8962 FLL lock completions before waitingMark Brown
Ensure that we don't spuriously trigger early. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Ensure we only run Speyside WM8962 bias level callbacks onceMark Brown
We get called once per DAPM context but only need to run once. When DAPM was serialized this was a series of noops but now it can run in parallel we need to take proper care. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Fix configuration of WM8996 input enablesMark Brown
There's no need for separate widgets for the enables (as the map already shows). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: WM8996 record paths need AIFCLKMark Brown
Make AIFCLK supply the record paths otherwise record will not work unless there is a simultaneous playback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-19ASoC: omap: Fix build errors in ams-deltaJarkko Nikula
Fix "error: too few arguments to function 'ams_delta_set_bias_level'" build errors in ams-delta.c that were introduced after commit d4c6005 ("ASoC: Add context parameter to card DAPM callbacks") by adding dapm context to ams_delta_set_bias_level calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Fix check for symmetric rate enforcementSascha Hauer
The ASoC core tries to not enforce symmetric rates when two streams open simultaneously. It does so by checking rtd->rate being zero. This works exactly once after booting because it is not set to zero again when the streams close. Fix this by setting rtd->rate when no active stream is left. [This leads to lots of warnings about not enforcing the symmetry in some situations as there's a race in the userspace API where we know we've got two applications but don't know what rates they want to set. -- broonie ] Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: remove cache supportScott Jiang
asoc cache layer can't support this kind of spi registers well. remove cache support and read/write registers directly Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Add spi hw read function for 16 addr 8 data mode for ad193x fixScott Jiang
[This will be used by the ad193x driver to fix the fact that the original author of the driver put a bodge for their particular chip into a the generic ASoC register I/O abstraction layer which looked like an obvious bug which ended up getting fixed in 3.0. Sadly there were no comments documenting what was going on. A minimally invasive correction to the driver is to remove the register cache support and go direct to the hardware all the time so we're adding a new feature -- broonie] Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: fix system clockScott Jiang
system clock is 24.576MHz instead of 12.288MHz Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: fix dac word len settingScott Jiang
dac word len value should left shift before setting Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-15ASoC: ad193x: fix registers definitionScott Jiang
fix dac word len mask and adc tdm fmt shift value Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-15ASoC: sta32x: Fix a memory leak if snd_soc_register_codec failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: soc-jack: Fix checking return value of request_any_context_irqAxel Lin
request_any_context_irq() returns a negative value on failure. On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.orG
2011-08-14ASoC: rx1950: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: h1940: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: Move WM8962 CLKREG_OVD earlierMark Brown
When the clocking registers are not overriden some of the registers are not writable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-25 02:01:30 +0000