aboutsummaryrefslogtreecommitdiff
path: root/drivers/regulator/Kconfig
AgeCommit message (Collapse)Author
2012-01-19regulator: add anatop regulator driverYing-Chun Liu (PaulLiu)
Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
2011-12-19PMIC: Add REGULATOR Driver for Dialog DA9052Ying-Chun Liu (PaulLiu)
Add DA9052 regulator driver from Dialog. Modify Kconfig/Makefile for DA9052 regulator driver. Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
2011-10-12regulator: gpio-regulator add dependency on GENERIC_GPIOHeiko Stübner
Without GENERIC_GPIO "struct gpio" is undefined leading to errors. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09regulator: Add driver for gpio-controlled regulatorsHeiko Stübner
This patch adds support for regulators that can be controlled via gpios. Examples for such regulators are the TI-tps65024x voltage regulators with 4 fixed and 1 runtime-switchable voltage regulators or the TI-bq240XX charger regulators. The number of controlling gpios is not limited, the mapping between voltage/current and target gpio state is done via the states map and the driver can be used for either voltage or current regulators. A mapping for a regulator with two GPIOs could look like: gpios = { { .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" }, { .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" }, } The flags element of the gpios array determines the initial state of the gpio, set during probe. The initial state of the regulator is also calculated from these values states = { { .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) }, { .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) }, { .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) }, { .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) }, } The target-state for the n-th gpio is determined by the n-th bit in the bitfield of the target-value. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-31regulator: aat2870: Add AAT2870 regulator driverJin Park
Add regulator driver for AnalogicTech AAT2870. Signed-off-by: Jin Park <jinyoungp@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31tps65912: add regulator driverMargarita Olaya
The tps65912 consist of 4 DCDCs and 10 LDOs. The output voltages can be configured by the SPI or I2C interface, they are meant to supply power to the main processor and other components. Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-23regulator: Convert tps65023 to use regmap APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27TPS65910: Add tps65910 regulator driverGraeme Gregory
The regulator module consists of 3 DCDCs and 8 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-24mach-ux500: voltage domain regulators for DB8500Bengt Jonsson
The DB8500 has ePOD:s (electronic power domains) which are possible to switch on/off to deactivate silicon blocks on the DB8500 SoC by cutting their power without retention. We model these as simple regulators with one bit on/off settings. Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-26regulator: fix typo in KconfigIgor Grinberg
Fix typo: s/TPS695x0/TPS659x0/ Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-23regulator: Add a subdriver for TI TPS6105x regulator portions v2Linus Walleij
This adds a subdriver for the regulator found inside the TPS61050 and TPS61052 chips. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23regulator: MAX8997/8966 supportMyungJoo Ham
This patch supports PMIC/Regulator part of MAX8997/MAX8966 MFD. In this initial release, selecting voltages or current-limit and switching on/off the regulators are supported. Controlling voltages for DVS with GPIOs is not implemented fully and requires more considerations: it controls multiple bucks (selection of 1, 2, and 5) at the same time with SET1~3 gpios. Thus, when DVS-GPIO is activated, we lose the ability to control the voltage of a single buck regulator independently; i.e., contolling a buck affects other two bucks. Therefore, using the conventional regulator framework directly might be problematic. However, in this driver, we try to choose a setting without such side effect of affecting other regulators and then try to choose a setting with the minimum side effect (the sum of voltage changes in other regulators). On the other hand, controlling all the three bucks simultenously based on the voltage set table may help build cpufreq and similar system more robust; i.e., all the three voltages are consistent every time without glitches during transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-12regulator: Allow modular build of mc13xxx-coreMark Brown
Since the MFD core for this device and the regulator drivers for these devices can be built modular we should also support modular build of the shared code for the regulator drivers, otherwise we try to link built in code against modular code with unfortunate results. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: support PMIC mc13892Yong Shen
add support for mc13892, tested on mx51 babbage board Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12make mc13783 regulator code genericYong Shen
move some common functions and micros of mc13783 regulaor driver to a seperate file, which makes it possible for mc13892 to share code. Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: add driver for tps6524x regulatorCyril Chemparathy
TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28Regulator: LP3972 PMIC regulator driverAxel Lin
This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28MAX8952 PMIC Driver Initial ReleaseMyungJoo Ham
MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6586x: add dependancy on MFD_TPS6585xMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: add TPS6586X regulator driverMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: add support for regulators on the ab8500 MFDSundar R IYER
Hi Mark, > I think that's everything. Please find the updated patch set as below. >From f4bf7eec4d210db5075c0bce4521d9be6bc76c8c Mon Sep 17 00:00:00 2001 From: Sundar R Iyer <sundar.iyer@stericsson.com> Date: Sun, 6 Jun 2010 19:12:12 +0530 Subject: [PATCH v3 1/2] regulator: add support for regulators on the ab8500 MFD Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11drivers: regulators: depend on MFD_MAX8998Marek Szyprowski
The MAX8998-pmic driver requires a core driver for all io operations. Like other regulator driver make it depend of the required MFD io driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11drivers: regulator: add Maxim 8998 driverKyungmin Park
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11ISL6271A voltage regulator support.Marek Vasut
This device is very simple, it supports one buck and two LDOs. The LDOs are fixed-voltage. Only the buck is programable over the I2C bus to 16 possible voltages. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: new drivers for AD5398 and AD5821Sonic Zhang
The AD5398 and AD5821 are single 10-bit DAC with 120 mA output current sink capability. They feature an internal reference and operates from a single 2.7 V to 5.5 V supply. This driver supports both the AD5398 and the AD5821. It adapts into the voltage and current framework. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-07regulator: Add max8925 supportHaojian Zhuang
MAX8925 contains 3 Buck and 20 LDO regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Rename 88pm8607 to 88pm860x in mfdHaojian Zhuang
Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-03regulator: Provide optional dummy regulator for consumersMark Brown
In order to ease transitions with drivers are boards start using regulators provide an option to cause all regulator_get() calls to succeed, with a dummy always on regulator being supplied where one has not been configured. A warning is printed whenever the dummy regulator is used to aid system development. This regulator does not implement any regulator operations but will allow simple consumers which only do enable() and disable() calls to run. It is kept separate from the fixed voltage regulator to avoid Kconfig confusion on the part of users when it is extended to allow boards to explicitly use the dummy regulator to simplify cases where the majority of supplies are from fixed regulators without software control. This option is currently only effective for systems which do not specify full constriants. If required an override could also be provided to allow these systems to use the dummy regulator, though it is likely that unconfigured supplies on such systems will lead to error due to regulators being powered down more aggressively when not in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03regulator: Add WM8994 regulator supportMark Brown
The WM8994 contains two LDOs with mixed hardware/software control to minimise the number of external supplies required while delivering optimal voltages to minimise power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03regulator: enable max8649 regulator driverHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03regulator: trivial: fix typos in user-visible Kconfig textAlex Chiang
Fix Kconfig text for some Wolfson Micro devices. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17regulator: add 88PM8607 PMIC driverHaojian Zhuang
Hi Liam, Since Samuel merged a new version of mfd 88pm8607 driver, I format a new patch on regulator 88pm8607. I paste the new patch in mail. Please help to review again. And I also attach the mfd driver in mail. From: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Thu, 8 Oct 2009 09:36:53 -0400 Subject: [PATCH] regulator: Add 88PM8607 PMIC driver This patch adds regulator drivers for Marvell 88PM8607 PMIC. This controller contains 3 DVC and 14 LDO regulators. This controller uses I2C interface. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-17regulator: add driver for MAX8660/8661Wolfram Sang
Tested with a MX25-based custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-14regulator: Add support for twl6030 regulatorsRajendra Nayak
This patch updates the regulator driver to add support for TWL6030 PMIC specific LDO regulators. SMPS resources are not yet supported for TWL6030 and also .set_mode and .get_status for LDO's are yet to be implemented for TWL6030. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-22regulator: drop 'default n'Wolfram Sang
Specifying 'default n' is superfluous. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22drivers/regulator/Kconfig: fix typo (s/Usersapce/Userspace/) in ↵Michael Prokop
REGULATOR_USERSPACE_CONSUMER description Signed-off-by: Michael Prokop <mika@grml.org> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22Regulator: Adding TPS65023 and TPS6507x in Kconfig and MakefileAnuj Aggarwal
Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-17regulator: AB3100 supportLinus Walleij
This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: Add Freescale MC13783 driverSascha Hauer
This driver provides basic support for the voltage regulators integrated into the Freescale MC13783 PMIC. It is currently only possible to enable/disable outputs, not to actually set the voltage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: Add WM831x DC-DC buck convertor supportMark Brown
The WM831x series of devices all have 3 DC-DC buck convertors. This driver implements software control for these regulators via the regulator API. Use with split hardware/software control of individual regulators is not supported, though regulators not controlled by software may be controlled via the hardware control interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: add pcap driverDaniel Ribeiro
Add (partial) support for the voltage regulators on the PCAP2 PMIC. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-15LP3971 PMIC regulator driver (updated and combined version)Marek Szyprowski
This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: add userspace-consumer driverMike Rapoport
The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15Maxim 1586 regulator driverRobert Jarzmik
The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: twl4030 regulatorsDavid Brownell
Support most of the LDO regulators in the twl4030 family chips. In the case of LDOs supporting MMC/SD, the voltage controls are used; but in most other cases, the regulator framework is only used to enable/disable a supplies, conserving power when a given voltage rail is not needed. The drivers/mfd/twl4030-core.c code already sets up the various regulators according to board-specific configuration, and knows that some chips don't provide the full set of voltage rails. The omitted regulators are intended to be under hardware control, such as during the hardware-mediated system powerup, powerdown, and suspend states. Unless/until software hooks are known to be safe, they won't be exported here. These regulators implement the new get_status() operation, but can't realistically implement get_mode(); the status output is effectively the result of a vote, with the relevant hardware inputs not exposed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Make fixed voltage regulators visible in KconfigMark Brown
This allows users to enable or disable support for these regulators at build time as they can for other regulators rather than having platforms force the regulators to be built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-11regulator: PCF50633 pmic driverBalaji Rao
Changes from V1: - Removed support for suspend_enable & suspend_disable functions. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-09regulator: Use menuconfig in KconfigTakashi Iwai
Use menuconfig instead of flat configs so that you can disable/enable regulator items with one selection. Also, use depends instead of reverse selections to make life easier, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13da903x: add regulator support for DA9030/DA9034Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@kernel.org>
2008-10-13regulator: Add WM8350 regulator supportMark Brown
The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 16:34:27 +0000