aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Allow NULL pointers in percpu_freeAlan Stern
The patch (as824b) makes percpu_free() ignore NULL arguments, as one would expect for a deallocation routine. (Note that free_percpu is #defined as percpu_free in include/linux/percpu.h.) A few callers are updated to remove now-unneeded tests for NULL. A few other callers already seem to assume that passing a NULL pointer to percpu_free() is okay! The patch also removes an unnecessary NULL check in percpu_depopulate(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Fix kunmap_atomic's use of kpte_clear_flush()Jeremy Fitzhardinge
kunmap_atomic() will call kpte_clear_flush with vaddr/ptep arguments which don't correspond if the vaddr is just a normal lowmem address (ie, not in the KMAP area). This patch makes sure that the pte is only cleared if kmap area was actually used for the mapping. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] mm: pagefault_{disable,enable}()Peter Zijlstra
Introduce pagefault_{disable,enable}() and use these where previously we did manual preempt increments/decrements to make the pagefault handler do the atomic thing. Currently they still rely on the increased preempt count, but do not rely on the disabled preemption, this might go away in the future. (NOTE: the extra barrier() in pagefault_disable might fix some holes on machines which have too many registers for their own good) [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] mm: arch do_page_fault() vs in_atomic()Peter Zijlstra
In light of the recent pagefault and filemap_copy_from_user work I've gone through all the arch pagefault handlers to make sure the inc_preempt_count() 'feature' works as expected. Several sections of code (including the new filemap_copy_from_user) rely on the fact that faults do not take locks under increased preempt count. arch/x86_64 - good arch/powerpc - good arch/cris - fixed arch/i386 - good arch/parisc - fixed arch/sh - good arch/sparc - good arch/s390 - good arch/m68k - fixed arch/ppc - good arch/alpha - fixed arch/mips - good arch/sparc64 - good arch/ia64 - good arch/arm - fixed arch/um - good arch/avr32 - good arch/h8300 - NA arch/m32r - good arch/v850 - good arch/frv - fixed arch/m68knommu - NA arch/arm26 - fixed arch/sh64 - fixed arch/xtensa - good Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] shared page table for hugetlb pageChen, Kenneth W
Following up with the work on shared page table done by Dave McCracken. This set of patch target shared page table for hugetlb memory only. The shared page table is particular useful in the situation of large number of independent processes sharing large shared memory segments. In the normal page case, the amount of memory saved from process' page table is quite significant. For hugetlb, the saving on page table memory is not the primary objective (as hugetlb itself already cuts down page table overhead significantly), instead, the purpose of using shared page table on hugetlb is to allow faster TLB refill and smaller cache pollution upon TLB miss. With PT sharing, pte entries are shared among hundreds of processes, the cache consumption used by all the page table is smaller and in return, application gets much higher cache hit ratio. One other effect is that cache hit ratio with hardware page walker hitting on pte in cache will be higher and this helps to reduce tlb miss latency. These two effects contribute to higher application performance. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Dave McCracken <dmccr@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] uml: workqueue build fixAndrew Morton
arch/um/drivers/chan_kern.c:643: error: conflicting types for 'chan_interrupt' arch/um/include/chan_kern.h:31: error: previous declaration of 'chan_interrupt' Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Import updates from i386's i8259.c [MIPS] *-berr: Header inclusions for DEC bus error handlers [MIPS] Compile __do_IRQ() when really needed [MIPS] genirq: use name instead of typename [MIPS] Do not use handle_level_irq for ioasic_dma_irq_type. [MIPS] pte_offset(dir,addr): parenthesis fix
2006-12-06[IA64] Fix pci.c kernel compilation breakage.Peter Chubb
The recent change to convert the is_enabled flag in the PCI device to an atomic count broke the IA64 compilation. As pcibios_disable_device is only ever called if the reference count is zero, convert the if to a BUG_ON. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-06[MIPS] Import updates from i386's i8259.cAtsushi Nemoto
Import many updates from i386's i8259.c, especially genirq transitions. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06[MIPS] *-berr: Header inclusions for DEC bus error handlersMaciej W. Rozycki
A fixup to add missing header inclusions for bus error handlers for DECstation system after the recent switch to get_irq_regs(). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06[MIPS] Compile __do_IRQ() when really neededFranck Bui-Huu
__do_IRQ() is needed only by irq handlers that can't use default handlers defined in kernel/irq/chip.c. For others platforms there's no need to compile this function since it won't be used. For those platforms this patch defines GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for this purpose. Futhermore for platforms which do not use __do_IRQ(), end() method which is part of the 'irq_chip' structure is not used. This patch simply removes this method in this case. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06[MIPS] genirq: use name instead of typenameAtsushi Nemoto
The "typename" field was obsoleted by the "name" field. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06[MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (43 commits) sh: sh775x/titan fixes for irq header changes. sh: update r7780rp defconfig. sh: compile fixes for header cleanup. sh: Fixup pte_mkhuge() build failure. sh: set KBUILD_IMAGE to something sensible. sh: show held locks in stack trace with lockdep. sh: platform_pata support for R7780RP sh: stacktrace/lockdep/irqflags tracing support. sh: Fixup movli.l/movco.l atomic ops for gcc4. sh: dyntick infrastructure. sh: Clock framework tidying. sh: Turn off IRQs around get_timer_offset() calls. sh: Get the PGD right in oops case with 64-bit PTEs. sh: Fix store queue bitmap end. sh: More flexible + SH7780 earlyprintk SCIF support. sh: Fixup various PAGE_SIZE == 4096 assumptions. sh: Fixup 4K irq stacks. sh: dma-api channel capability extensions. sh: Drop name overload in dma-sh. sh: Make dma-isa depend on ISA_DMA_API. ...
2006-12-06Merge git://git.infradead.org/users/dhowells/workq-2.6Linus Torvalds
* git://git.infradead.org/users/dhowells/workq-2.6: Actually update the fixed up compile failures. WorkQueue: Fix up arch-specific work items where possible WorkStruct: make allyesconfig WorkStruct: Pass the work_struct pointer instead of context data WorkStruct: Merge the pending bit into the wq_data pointer WorkStruct: Typedef the work function prototype WorkStruct: Separate delayable and non-delayable events.
2006-12-06[PATCH] m68knommu: switch 68360 to using rtc_timeGreg Ungerer
Adds support for RTCs (through genrtc) for M68KNOMMU. Board-specific code will have to link the appropriate RTC driver to the mach_hwclk callback, at minimum. This patch switches the 68360 code over to using rtc_time. Signed-off-by: Gavin Lambert <gavinl@compacsort.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06[PATCH] m68knommu: fix timer register access on 523x ColdFire platformsGreg Ungerer
The 523x timer TRR register is a full 32bits, the older register (on other ColdFire parts) was only 16 bits. Use the right type of __raw_read when accessing it. Problem found by Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06sh: sh775x/titan fixes for irq header changes.Jamie Lenehan
The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: update r7780rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: compile fixes for header cleanup.Paul Mundt
Since some header inclusion paths were cleaned up, compilation broke. Add in the headers we need directly to build again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: set KBUILD_IMAGE to something sensible.Paul Mundt
This was missing for sh too, wire it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: show held locks in stack trace with lockdep.Paul Mundt
Follows the same change as other architectures.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: platform_pata support for R7780RPPaul Mundt
This adds a platform device for the directly connected CF interface on R7780RP boards, for use with the pata_platform libata driver. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: stacktrace/lockdep/irqflags tracing support.Paul Mundt
Wire up all of the essentials for lockdep.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dyntick infrastructure.Paul Mundt
This adds basic NO_IDLE_HZ support to the SH timer API so timers are able to wire it up. Taken from the ARM version, as it fit in to our API with very few changes needed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Clock framework tidying.Paul Mundt
This syncs up the SH clock framework with the linux/clk.h API, for which there were only some minor changes required, namely the clk_get() dev_id and subsequent callsites. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Turn off IRQs around get_timer_offset() calls.Paul Mundt
Since all of the sys_timer sources currently do this on their own within the ->get_offset() path, it's more sensible to just have the caller take care of it when grabbing xtime_lock. Incidentally, this is more in line with what others (ie, ARM) are doing already. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Get the PGD right in oops case with 64-bit PTEs.Paul Mundt
Previously this was using a static pgd shift in the reporting code, simply flip this to PGDIR_SHIFT which does the right thing depending on varying PTE magnitudes on the SH-X2 MMU. While we're at it, and since it's been recently added, use get_TTB() for fetching the TTB, rather than the open coded instructions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fix store queue bitmap end.Paul Mundt
The end of the store queue bitmap is miscalculated when searching for a free range in sq_remap(), missing the PAGE_SHIFT shift that's done in sq_api_init(). This runs in to workloads where we can scan beyond the end of the bitmap. Spotted by Paul Jackson: http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: More flexible + SH7780 earlyprintk SCIF support.Paul Mundt
This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup various PAGE_SIZE == 4096 assumptions.Paul Mundt
There were a number of places that made evil PAGE_SIZE == 4k assumptions that ended up breaking when trying to play with 8k and 64k page sizes, this fixes those up. The most significant change is the way we load THREAD_SIZE, previously this was done via: mov #(THREAD_SIZE >> 8), reg shll8 reg to avoid a memory access and allow the immediate load. With a 64k PAGE_SIZE, we're out of range for the immediate load size without resorting to special instructions available in later ISAs (movi20s and so on). The "workaround" for this is to bump up the shift to 10 and insert a shll2, which gives a bit more flexibility while still being much cheaper than a memory access. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup 4K irq stacks.Paul Mundt
There was a clobber issue with the register we were saving the stack in, so we switch to a register that we handle in the clobber list properly already. This also follows the x86 changes for allowing the softirq checks from hardirq context. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dma-api channel capability extensions.Mark Glaisher
This extends the SH DMA API for allowing handling of DMA channels based off of their respective capabilities. A couple of functions are added to the existing API, the core bits are register_chan_caps() for registering channel capabilities, and request_dma_bycap() for fetching a channel dynamically based off of a capability set. Signed-off-by: Mark Glaisher <mark.glaisher@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Drop name overload in dma-sh.Paul Mundt
Pass along the dev_id from request_dma() all the way down, rather than inserting an artificial name relating to the TEI line that we were doing before. This makes the line a bit less obvious, but dev_id is the proper behaviour for this regardless. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Make dma-isa depend on ISA_DMA_API.Paul Mundt
Previously we linked in the ISA DMA wrapper unconditionally. As there are very few users of this, it's better to make it conditional. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dma-sysfs fixes.Paul Mundt
Handle the case where no registered DMACs exist somewhat more gracefully. While we're at it, check for sysdev_create_file() failing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fix syscall tracing ordering.Stuart Menefy
The implementation of system call tracing in the kernel has a couple of ordering problems: - the validity of the system call number is checked before calling out to system call tracing code, and should be done after - the system call number used when tracing is the one the system call was invoked with, while the system call tracing code can legitimatly change the call number (for example strace permutes fork into clone) This patch fixes both of these problems, and also reoders the code slightly to make the direct path through the code the common case. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: TLB miss fast-path optimizations.Stuart Menefy
Handle simple TLB miss faults which can be resolved completely from the page table in assembler. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: R7780RP push-switch support.Paul Mundt
This adds simple push-switch support for the RDBRP-1/RDBREVRP-1 debug boards found on the R7780RP-1. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: generic push-switch framework.Paul Mundt
This adds support for a generic push switch framework. Adaptable for various switches, including GPIO switches and the push switches commonly found on Renesas debug boards. This allows switch states to be trivially reported through sysfs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: pmd rework.Stuart Menefy
Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Use MMU.TTB register as pointer to current pgd.Stuart Menefy
Add TTB accessor functions and give it a sensible default value. We will use this later for optimizing the fault path. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Set up correct siginfo structures for page faults.Stuart Menefy
Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: gcc4 support.Stuart Menefy
This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Explicit endian selection support.Paul Mundt
Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: p3map_sem sem2mutex conversion.Paul Mundt
Simple sem2mutex conversion for the p3map semaphores. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Preliminary support for SH-X2 MMU.Paul Mundt
This adds some preliminary support for the SH-X2 MMU, used by newer SH-4A parts (particularly SH7785). This MMU implements a 'compat' mode with SH-X MMUs and an 'extended' mode for SH-X2 extended features. Extended features include additional page sizes (8kB, 4MB, 64MB), as well as the addition of page execute permissions. The extended mode attributes are placed in a second data array, which requires us to switch to 64-bit PTEs when in X2 mode. With the addition of the exec perms, we also overhaul the mmap prots somewhat, now that it's possible to handle them more intelligently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Hook SH7785 in to the build system.Paul Mundt
Simple 7785 placeholders to start hooking up other bits of code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Drop CPU subtype IRQ headers.Paul Mundt
This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: Paul Mundt <lethal@linux-sh.org>