aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_phy.c494
1 files changed, 494 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
new file mode 100644
index 00000000000..8002931ae82
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -0,0 +1,494 @@
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
+static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+
+/**
+ * ixgbe_identify_phy - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 phy_addr;
+
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+ hw->phy.addr = phy_addr;
+ ixgbe_get_phy_id(hw);
+ hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
+ status = 0;
+ break;
+ }
+ }
+ return status;
+}
+
+/**
+ * ixgbe_validate_phy_addr - Determines phy address is valid
+ * @hw: pointer to hardware structure
+ *
+ **/
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+ u16 phy_id = 0;
+ bool valid = false;
+
+ hw->phy.addr = phy_addr;
+ ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id);
+
+ if (phy_id != 0xFFFF && phy_id != 0x0)
+ valid = true;
+
+ return valid;
+}
+
+/**
+ * ixgbe_get_phy_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 phy_id_high = 0;
+ u16 phy_id_low = 0;
+
+ status = ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_high);
+
+ if (status == 0) {
+ hw->phy.id = (u32)(phy_id_high << 16);
+ status = ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_PHY_ID_LOW,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_low);
+ hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+ hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_type_from_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+ enum ixgbe_phy_type phy_type;
+
+ switch (phy_id) {
+ case TN1010_PHY_ID:
+ phy_type = ixgbe_phy_tn;
+ break;
+ case QT2022_PHY_ID:
+ phy_type = ixgbe_phy_qt;
+ break;
+ default:
+ phy_type = ixgbe_phy_unknown;
+ break;
+ }
+
+ return phy_type;
+}
+
+/**
+ * ixgbe_reset_phy - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+ /*
+ * Perform soft PHY reset to the PHY_XS.
+ * This will cause a soft reset to the PHY
+ */
+ return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ IXGBE_MDIO_PHY_XS_RESET);
+}
+
+/**
+ * ixgbe_read_phy_reg - Reads a value from a specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ u32 command;
+ u32 i;
+ u32 timeout = 10;
+ u32 data;
+ s32 status = 0;
+ u16 gssr;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ gssr = IXGBE_GSSR_PHY1_SM;
+ else
+ gssr = IXGBE_GSSR_PHY0_SM;
+
+ if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < timeout; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address command did not complete.\n");
+ status = IXGBE_ERR_PHY;
+ }
+
+ if (status == 0) {
+ /*
+ * Address cycle complete, setup and write the read
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < timeout; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw,
+ "PHY read command didn't complete\n");
+ status = IXGBE_ERR_PHY;
+ } else {
+ /*
+ * Read operation is complete. Get the data
+ * from MSRWD
+ */
+ data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+ data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+ *phy_data = (u16)(data);
+ }
+ }
+
+ ixgbe_release_swfw_sync(hw, gssr);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_write_phy_reg - Writes a value to specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ u32 command;
+ u32 i;
+ u32 timeout = 10;
+ s32 status = 0;
+ u16 gssr;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ gssr = IXGBE_GSSR_PHY1_SM;
+ else
+ gssr = IXGBE_GSSR_PHY0_SM;
+
+ if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ /* Put the data in the MDI single read and write data register*/
+ IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < timeout; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
+ break;
+ }
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ status = IXGBE_ERR_PHY;
+
+ if (status == 0) {
+ /*
+ * Address cycle complete, setup and write the write
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < timeout; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+ hw_dbg(hw, "PHY write command did not "
+ "complete.\n");
+ break;
+ }
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ status = IXGBE_ERR_PHY;
+ }
+
+ ixgbe_release_swfw_sync(hw, gssr);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_tnx_phy_link - Set and restart autoneg
+ * @hw: pointer to hardware structure
+ *
+ * Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_NOT_IMPLEMENTED;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 autoneg_speed_selection_register = 0x10;
+ u16 autoneg_restart_mask = 0x0200;
+ u16 autoneg_complete_mask = 0x0020;
+ u16 autoneg_reg = 0;
+
+ /*
+ * Set advertisement settings in PHY based on autoneg_advertised
+ * settings. If autoneg_advertised = 0, then advertise default values
+ * txn devices cannot be "forced" to a autoneg 10G and fail. But can
+ * for a 1G.
+ */
+ ixgbe_read_phy_reg(hw,
+ autoneg_speed_selection_register,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
+ else
+ autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
+
+ ixgbe_write_phy_reg(hw,
+ autoneg_speed_selection_register,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+
+
+ /* Restart PHY autonegotiation and wait for completion */
+ ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg |= autoneg_restart_mask;
+
+ ixgbe_write_phy_reg(hw,
+ IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+
+ /* Wait for autonegotiation to finish */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ /* Restart PHY autonegotiation and wait for completion */
+ status = ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= autoneg_complete_mask;
+ if (autoneg_reg == autoneg_complete_mask) {
+ status = 0;
+ break;
+ }
+ }
+
+ if (time_out == max_time_out)
+ status = IXGBE_ERR_LINK_SETUP;
+
+ return status;
+}
+
+/**
+ * ixgbe_check_tnx_phy_link - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
+ bool *link_up)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+ *link_up = true;
+ if (phy_speed ==
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ } else {
+ status = ixgbe_read_phy_reg(hw,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ &phy_data);
+ phy_link = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+ phy_speed = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ **/
+s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ /*
+ * Clear autoneg_advertised and set new values based on input link
+ * speed.
+ */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* Setup link based on the new speed settings */
+ ixgbe_setup_tnx_phy_link(hw);
+
+ return 0;
+}