aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r--drivers/gpu/drm/i915/intel_display.c33
1 files changed, 24 insertions, 9 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 981b1f1c04d..e77a863a383 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
@@ -4711,7 +4712,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
lvds_bpc = 6;
if (lvds_bpc < display_bpc) {
- DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
display_bpc = lvds_bpc;
}
continue;
@@ -4722,7 +4723,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
unsigned int edp_bpc = dev_priv->edp.bpp / 3;
if (edp_bpc < display_bpc) {
- DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
display_bpc = edp_bpc;
}
continue;
@@ -4737,7 +4738,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
/* Don't use an invalid EDID bpc value */
if (connector->display_info.bpc &&
connector->display_info.bpc < display_bpc) {
- DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
display_bpc = connector->display_info.bpc;
}
}
@@ -4748,10 +4749,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
*/
if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
if (display_bpc > 8 && display_bpc < 12) {
- DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n");
+ DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
display_bpc = 12;
} else {
- DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n");
+ DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
display_bpc = 8;
}
}
@@ -4789,8 +4790,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
display_bpc = min(display_bpc, bpc);
- DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
- bpc, display_bpc);
+ DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
+ bpc, display_bpc);
*pipe_bpp = display_bpc * 3;
@@ -5671,7 +5672,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
if ((is_lvds && dev_priv->lvds_dither) || dither) {
pipeconf |= PIPECONF_DITHER_EN;
- pipeconf |= PIPECONF_DITHER_TYPE_ST1;
+ pipeconf |= PIPECONF_DITHER_TYPE_SP;
}
if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
intel_dp_set_m_n(crtc, mode, adjusted_mode);
@@ -8148,6 +8149,20 @@ static void gen6_init_clock_gating(struct drm_device *dev)
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+ * gating disable must be set. Failure to set it results in
+ * flickering pixels due to Z write ordering failures after
+ * some amount of runtime in the Mesa "fire" demo, and Unigine
+ * Sanctuary and Tropics, and apparently anything else with
+ * alpha test or pixel discard.
+ *
+ * According to the spec, bit 11 (RCCUNIT) must also be set,
+ * but we didn't debug actual testcases to find it out.
+ */
+ I915_WRITE(GEN6_UCGCTL2,
+ GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+ GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc: