aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-davinci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-davinci.c')
-rw-r--r--drivers/gpio/gpio-davinci.c455
1 files changed, 455 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 00000000000..df0d59570a8
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,455 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+struct davinci_gpio_regs {
+ u32 dir;
+ u32 out_data;
+ u32 set_data;
+ u32 clr_data;
+ u32 in_data;
+ u32 set_rising;
+ u32 clr_rising;
+ u32 set_falling;
+ u32 clr_falling;
+ u32 intstat;
+};
+
+#define chip2controller(chip) \
+ container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+ void __iomem *ptr;
+
+ if (gpio < 32 * 1)
+ ptr = gpio_base + 0x10;
+ else if (gpio < 32 * 2)
+ ptr = gpio_base + 0x38;
+ else if (gpio < 32 * 3)
+ ptr = gpio_base + 0x60;
+ else if (gpio < 32 * 4)
+ ptr = gpio_base + 0x88;
+ else if (gpio < 32 * 5)
+ ptr = gpio_base + 0xb0;
+ else
+ ptr = NULL;
+ return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+ struct davinci_gpio_regs __iomem *g;
+
+ g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
+
+ return g;
+}
+
+static int __init davinci_gpio_irq_setup(void);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+ unsigned offset, bool out, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+ unsigned long flags;
+ u32 temp;
+ u32 mask = 1 << offset;
+
+ spin_lock_irqsave(&d->lock, flags);
+ temp = __raw_readl(&g->dir);
+ if (out) {
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
+ } else {
+ temp |= mask;
+ }
+ __raw_writel(temp, &g->dir);
+ spin_unlock_irqrestore(&d->lock, flags);
+
+ return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+ return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ return (1 << offset) & __raw_readl(&g->in_data);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+ int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs *regs;
+
+ if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+ return 0;
+
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+ if (WARN_ON(!gpio_base))
+ return -ENOMEM;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+ chips[i].chip.label = "DaVinci";
+
+ chips[i].chip.direction_input = davinci_direction_in;
+ chips[i].chip.get = davinci_gpio_get;
+ chips[i].chip.direction_output = davinci_direction_out;
+ chips[i].chip.set = davinci_gpio_set;
+
+ chips[i].chip.base = base;
+ chips[i].chip.ngpio = ngpio - base;
+ if (chips[i].chip.ngpio > 32)
+ chips[i].chip.ngpio = 32;
+
+ spin_lock_init(&chips[i].lock);
+
+ regs = gpio2regs(base);
+ chips[i].regs = regs;
+ chips[i].set_data = &regs->set_data;
+ chips[i].clr_data = &regs->clr_data;
+ chips[i].in_data = &regs->in_data;
+
+ gpiochip_add(&chips[i].chip);
+ }
+
+ soc_info->gpio_ctlrs = chips;
+ soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
+ davinci_gpio_irq_setup();
+ return 0;
+}
+pure_initcall(davinci_gpio_setup);
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ __raw_writel(mask, &g->clr_falling);
+ __raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+ unsigned status = irqd_get_trigger_type(d);
+
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+ if (status & IRQ_TYPE_EDGE_FALLING)
+ __raw_writel(mask, &g->set_falling);
+ if (status & IRQ_TYPE_EDGE_RISING)
+ __raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .irq_enable = gpio_irq_enable,
+ .irq_disable = gpio_irq_disable,
+ .irq_set_type = gpio_irq_type,
+ .flags = IRQCHIP_SET_TYPE_MASKED,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct davinci_gpio_regs __iomem *g;
+ u32 mask = 0xffff;
+ struct davinci_gpio_controller *d;
+
+ d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+ g = (struct davinci_gpio_regs __iomem *)d->regs;
+
+ /* we only care about one bank */
+ if (irq & 1)
+ mask <<= 16;
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ while (1) {
+ u32 status;
+ int n;
+ int res;
+
+ /* ack any irqs */
+ status = __raw_readl(&g->intstat) & mask;
+ if (!status)
+ break;
+ __raw_writel(status, &g->intstat);
+
+ /* now demux them to the right lowlevel handler */
+ n = d->irq_base;
+ if (irq & 1) {
+ n += 16;
+ status >>= 16;
+ }
+
+ while (status) {
+ res = ffs(status);
+ n += res;
+ generic_handle_irq(n - 1);
+ status >>= res;
+ }
+ }
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ /* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+
+ if (d->irq_base >= 0)
+ return d->irq_base + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ /* NOTE: we assume for now that only irqs in the first gpio_chip
+ * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+ */
+ if (offset < soc_info->gpio_unbanked)
+ return soc_info->gpio_irq + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+
+ return 0;
+}
+
+/*
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+ unsigned gpio, irq, bank;
+ struct clk *clk;
+ u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs __iomem *g;
+
+ ngpio = soc_info->gpio_num;
+
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(NULL, "gpio");
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "Error %ld getting gpio clock?\n",
+ PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ clk_enable(clk);
+
+ /* Arrange gpio_to_irq() support, handling either direct IRQs or
+ * banked IRQs. Having GPIOs in the first GPIO bank use direct
+ * IRQs, while the others use banked IRQs, would need some setup
+ * tweaks to recognize hardware which can do that.
+ */
+ for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+ chips[bank].chip.to_irq = gpio_to_irq_banked;
+ chips[bank].irq_base = soc_info->gpio_unbanked
+ ? -EINVAL
+ : (soc_info->intc_irq_num + gpio);
+ }
+
+ /*
+ * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+ * controller only handling trigger modes. We currently assume no
+ * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+ */
+ if (soc_info->gpio_unbanked) {
+ static struct irq_chip gpio_irqchip_unbanked;
+
+ /* pass "bank 0" GPIO IRQs to AINTC */
+ chips[0].chip.to_irq = gpio_to_irq_unbanked;
+ binten = BIT(0);
+
+ /* AINTC handles mask/unmask; GPIO handles triggering */
+ irq = bank_irq;
+ gpio_irqchip_unbanked = *irq_get_chip(irq);
+ gpio_irqchip_unbanked.name = "GPIO-AINTC";
+ gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+
+ /* default trigger: both edges */
+ g = gpio2regs(0);
+ __raw_writel(~0, &g->set_falling);
+ __raw_writel(~0, &g->set_rising);
+
+ /* set the direct IRQs up to use that irqchip */
+ for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+ irq_set_chip(irq, &gpio_irqchip_unbanked);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
+ }
+
+ goto done;
+ }
+
+ /*
+ * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+ * then chain through our own handler.
+ */
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
+ unsigned i;
+
+ /* disabled by default, enabled only as needed */
+ g = gpio2regs(gpio);
+ __raw_writel(~0, &g->clr_falling);
+ __raw_writel(~0, &g->clr_rising);
+
+ /* set up all irqs in this bank */
+ irq_set_chained_handler(bank_irq, gpio_irq_handler);
+
+ /*
+ * Each chip handles 32 gpios, and each irq bank consists of 16
+ * gpio irqs. Pass the irq bank's corresponding controller to
+ * the chained irq handler.
+ */
+ irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
+ irq_set_chip(irq, &gpio_irqchip);
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_handler(irq, handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ binten |= BIT(bank);
+ }
+
+done:
+ /* BINTEN -- per-bank interrupt enable. genirq would also let these
+ * bits be set/cleared dynamically.
+ */
+ __raw_writel(binten, gpio_base + 0x08);
+
+ printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+ return 0;
+}