aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/ftape/lowlevel/ftape-io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ftape/lowlevel/ftape-io.c')
-rw-r--r--drivers/char/ftape/lowlevel/ftape-io.c992
1 files changed, 0 insertions, 992 deletions
diff --git a/drivers/char/ftape/lowlevel/ftape-io.c b/drivers/char/ftape/lowlevel/ftape-io.c
deleted file mode 100644
index 259015aeff5..00000000000
--- a/drivers/char/ftape/lowlevel/ftape-io.c
+++ /dev/null
@@ -1,992 +0,0 @@
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- * (C) 1996 Kai Harrekilde-Petersen,
- * (C) 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.c,v $
- * $Revision: 1.4 $
- * $Date: 1997/11/11 14:02:36 $
- *
- * This file contains the general control functions for the
- * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/system.h>
-#include <linux/ioctl.h>
-#include <linux/mtio.h>
-#include <linux/delay.h>
-
-#include <linux/ftape.h>
-#include <linux/qic117.h>
-#include "../lowlevel/ftape-tracing.h"
-#include "../lowlevel/fdc-io.h"
-#include "../lowlevel/ftape-io.h"
-#include "../lowlevel/ftape-ctl.h"
-#include "../lowlevel/ftape-rw.h"
-#include "../lowlevel/ftape-write.h"
-#include "../lowlevel/ftape-read.h"
-#include "../lowlevel/ftape-init.h"
-#include "../lowlevel/ftape-calibr.h"
-
-/* Global vars.
- */
-/* NOTE: sectors start numbering at 1, all others at 0 ! */
-ft_timeout_table ftape_timeout;
-unsigned int ftape_tape_len;
-volatile qic117_cmd_t ftape_current_command;
-const struct qic117_command_table qic117_cmds[] = QIC117_COMMANDS;
-int ftape_might_be_off_track;
-
-/* Local vars.
- */
-static int diagnostic_mode;
-static unsigned int ftape_udelay_count;
-static unsigned int ftape_udelay_time;
-
-void ftape_udelay(unsigned int usecs)
-{
- volatile int count = (ftape_udelay_count * usecs +
- ftape_udelay_count - 1) / ftape_udelay_time;
- volatile int i;
-
- while (count-- > 0) {
- for (i = 0; i < 20; ++i);
- }
-}
-
-void ftape_udelay_calibrate(void)
-{
- ftape_calibrate("ftape_udelay",
- ftape_udelay, &ftape_udelay_count, &ftape_udelay_time);
-}
-
-/* Delay (msec) routine.
- */
-void ftape_sleep(unsigned int time)
-{
- TRACE_FUN(ft_t_any);
-
- time *= 1000; /* msecs -> usecs */
- if (time < FT_USPT) {
- /* Time too small for scheduler, do a busy wait ! */
- ftape_udelay(time);
- } else {
- long timeout;
- unsigned long flags;
- unsigned int ticks = (time + FT_USPT - 1) / FT_USPT;
-
- TRACE(ft_t_any, "%d msec, %d ticks", time/1000, ticks);
- timeout = ticks;
- save_flags(flags);
- sti();
- msleep_interruptible(jiffies_to_msecs(timeout));
- /* Mmm. Isn't current->blocked == 0xffffffff ?
- */
- if (signal_pending(current)) {
- TRACE(ft_t_err, "awoken by non-blocked signal :-(");
- }
- restore_flags(flags);
- }
- TRACE_EXIT;
-}
-
-/* send a command or parameter to the drive
- * Generates # of step pulses.
- */
-static inline int ft_send_to_drive(int arg)
-{
- /* Always wait for a command_timeout period to separate
- * individuals commands and/or parameters.
- */
- ftape_sleep(3 * FT_MILLISECOND);
- /* Keep cylinder nr within range, step towards home if possible.
- */
- if (ftape_current_cylinder >= arg) {
- return fdc_seek(ftape_current_cylinder - arg);
- } else {
- return fdc_seek(ftape_current_cylinder + arg);
- }
-}
-
-/* forward */ int ftape_report_raw_drive_status(int *status);
-
-static int ft_check_cmd_restrictions(qic117_cmd_t command)
-{
- int status = -1;
- TRACE_FUN(ft_t_any);
-
- TRACE(ft_t_flow, "%s", qic117_cmds[command].name);
- /* A new motion command during an uninterruptible (motion)
- * command requires a ready status before the new command can
- * be issued. Otherwise a new motion command needs to be
- * checked against required status.
- */
- if (qic117_cmds[command].cmd_type == motion &&
- qic117_cmds[ftape_current_command].non_intr) {
- ftape_report_raw_drive_status(&status);
- if ((status & QIC_STATUS_READY) == 0) {
- TRACE(ft_t_noise,
- "motion cmd (%d) during non-intr cmd (%d)",
- command, ftape_current_command);
- TRACE(ft_t_noise, "waiting until drive gets ready");
- ftape_ready_wait(ftape_timeout.seek,
- &status);
- }
- }
- if (qic117_cmds[command].mask != 0) {
- __u8 difference;
- /* Some commands do require a certain status:
- */
- if (status == -1) { /* not yet set */
- ftape_report_raw_drive_status(&status);
- }
- difference = ((status ^ qic117_cmds[command].state) &
- qic117_cmds[command].mask);
- /* Wait until the drive gets
- * ready. This may last forever if
- * the drive never gets ready...
- */
- while ((difference & QIC_STATUS_READY) != 0) {
- TRACE(ft_t_noise, "command %d issued while not ready",
- command);
- TRACE(ft_t_noise, "waiting until drive gets ready");
- if (ftape_ready_wait(ftape_timeout.seek,
- &status) == -EINTR) {
- /* Bail out on signal !
- */
- TRACE_ABORT(-EINTR, ft_t_warn,
- "interrupted by non-blockable signal");
- }
- difference = ((status ^ qic117_cmds[command].state) &
- qic117_cmds[command].mask);
- }
- while ((difference & QIC_STATUS_ERROR) != 0) {
- int err;
- qic117_cmd_t cmd;
-
- TRACE(ft_t_noise,
- "command %d issued while error pending",
- command);
- TRACE(ft_t_noise, "clearing error status");
- ftape_report_error(&err, &cmd, 1);
- ftape_report_raw_drive_status(&status);
- difference = ((status ^ qic117_cmds[command].state) &
- qic117_cmds[command].mask);
- if ((difference & QIC_STATUS_ERROR) != 0) {
- /* Bail out on fatal signal !
- */
- FT_SIGNAL_EXIT(_NEVER_BLOCK);
- }
- }
- if (difference) {
- /* Any remaining difference can't be solved
- * here.
- */
- if (difference & (QIC_STATUS_CARTRIDGE_PRESENT |
- QIC_STATUS_NEW_CARTRIDGE |
- QIC_STATUS_REFERENCED)) {
- TRACE(ft_t_warn,
- "Fatal: tape removed or reinserted !");
- ft_failure = 1;
- } else {
- TRACE(ft_t_err, "wrong state: 0x%02x should be: 0x%02x",
- status & qic117_cmds[command].mask,
- qic117_cmds[command].state);
- }
- TRACE_EXIT -EIO;
- }
- if (~status & QIC_STATUS_READY & qic117_cmds[command].mask) {
- TRACE_ABORT(-EBUSY, ft_t_err, "Bad: still busy!");
- }
- }
- TRACE_EXIT 0;
-}
-
-/* Issue a tape command:
- */
-int ftape_command(qic117_cmd_t command)
-{
- int result = 0;
- static int level;
- TRACE_FUN(ft_t_any);
-
- if ((unsigned int)command > NR_ITEMS(qic117_cmds)) {
- /* This is a bug we'll want to know about too.
- */
- TRACE_ABORT(-EIO, ft_t_bug, "bug - bad command: %d", command);
- }
- if (++level > 5) { /* This is a bug we'll want to know about. */
- --level;
- TRACE_ABORT(-EIO, ft_t_bug, "bug - recursion for command: %d",
- command);
- }
- /* disable logging and restriction check for some commands,
- * check all other commands that have a prescribed starting
- * status.
- */
- if (diagnostic_mode) {
- TRACE(ft_t_flow, "diagnostic command %d", command);
- } else if (command == QIC_REPORT_DRIVE_STATUS ||
- command == QIC_REPORT_NEXT_BIT) {
- TRACE(ft_t_any, "%s", qic117_cmds[command].name);
- } else {
- TRACE_CATCH(ft_check_cmd_restrictions(command), --level);
- }
- /* Now all conditions are met or result was < 0.
- */
- result = ft_send_to_drive((unsigned int)command);
- if (qic117_cmds[command].cmd_type == motion &&
- command != QIC_LOGICAL_FORWARD && command != QIC_STOP_TAPE) {
- ft_location.known = 0;
- }
- ftape_current_command = command;
- --level;
- TRACE_EXIT result;
-}
-
-/* Send a tape command parameter:
- * Generates command # of step pulses.
- * Skips tape-status call !
- */
-int ftape_parameter(unsigned int parameter)
-{
- TRACE_FUN(ft_t_any);
-
- TRACE(ft_t_flow, "called with parameter = %d", parameter);
- TRACE_EXIT ft_send_to_drive(parameter + 2);
-}
-
-/* Wait for the drive to get ready.
- * timeout time in milli-seconds
- * Returned status is valid if result != -EIO
- *
- * Should we allow to be killed by SIGINT? (^C)
- * Would be nice at least for large timeouts.
- */
-int ftape_ready_wait(unsigned int timeout, int *status)
-{
- unsigned long t0;
- unsigned int poll_delay;
- int signal_retries;
- TRACE_FUN(ft_t_any);
-
- /* the following ** REALLY ** reduces the system load when
- * e.g. one simply rewinds or retensions. The tape is slow
- * anyway. It is really not necessary to detect error
- * conditions with 1/10 seconds granularity
- *
- * On my AMD 133MHZ 486: 100 ms: 23% system load
- * 1 sec: 5%
- * 5 sec: 0.6%, yeah
- */
- if (timeout <= FT_SECOND) {
- poll_delay = 100 * FT_MILLISECOND;
- signal_retries = 20; /* two seconds */
- } else if (timeout < 20 * FT_SECOND) {
- TRACE(ft_t_flow, "setting poll delay to 1 second");
- poll_delay = FT_SECOND;
- signal_retries = 2; /* two seconds */
- } else {
- TRACE(ft_t_flow, "setting poll delay to 5 seconds");
- poll_delay = 5 * FT_SECOND;
- signal_retries = 1; /* five seconds */
- }
- for (;;) {
- t0 = jiffies;
- TRACE_CATCH(ftape_report_raw_drive_status(status),);
- if (*status & QIC_STATUS_READY) {
- TRACE_EXIT 0;
- }
- if (!signal_retries--) {
- FT_SIGNAL_EXIT(_NEVER_BLOCK);
- }
- if ((int)timeout >= 0) {
- /* this will fail when jiffies wraps around about
- * once every year :-)
- */
- timeout -= ((jiffies - t0) * FT_SECOND) / HZ;
- if (timeout <= 0) {
- TRACE_ABORT(-ETIME, ft_t_err, "timeout");
- }
- ftape_sleep(poll_delay);
- timeout -= poll_delay;
- } else {
- ftape_sleep(poll_delay);
- }
- }
- TRACE_EXIT -ETIME;
-}
-
-/* Issue command and wait up to timeout milli seconds for drive ready
- */
-int ftape_command_wait(qic117_cmd_t command, unsigned int timeout, int *status)
-{
- int result;
-
- /* Drive should be ready, issue command
- */
- result = ftape_command(command);
- if (result >= 0) {
- result = ftape_ready_wait(timeout, status);
- }
- return result;
-}
-
-static int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status)
-{
- int result;
-
- /* Drive should be ready, issue command
- */
- result = ftape_parameter(parm);
- if (result >= 0) {
- result = ftape_ready_wait(timeout, status);
- }
- return result;
-}
-
-/*--------------------------------------------------------------------------
- * Report operations
- */
-
-/* Query the drive about its status. The command is sent and
- result_length bits of status are returned (2 extra bits are read
- for start and stop). */
-
-int ftape_report_operation(int *status,
- qic117_cmd_t command,
- int result_length)
-{
- int i, st3;
- unsigned int t0;
- unsigned int dt;
- TRACE_FUN(ft_t_any);
-
- TRACE_CATCH(ftape_command(command),);
- t0 = ftape_timestamp();
- i = 0;
- do {
- ++i;
- ftape_sleep(3 * FT_MILLISECOND); /* see remark below */
- TRACE_CATCH(fdc_sense_drive_status(&st3),);
- dt = ftape_timediff(t0, ftape_timestamp());
- /* Ack should be asserted within Ttimout + Tack = 6 msec.
- * Looks like some drives fail to do this so extend this
- * period to 300 msec.
- */
- } while (!(st3 & ST3_TRACK_0) && dt < 300000);
- if (!(st3 & ST3_TRACK_0)) {
- TRACE(ft_t_err,
- "No acknowledge after %u msec. (%i iter)", dt / 1000, i);
- TRACE_ABORT(-EIO, ft_t_err, "timeout on Acknowledge");
- }
- /* dt may be larger than expected because of other tasks
- * scheduled while we were sleeping.
- */
- if (i > 1 && dt > 6000) {
- TRACE(ft_t_err, "Acknowledge after %u msec. (%i iter)",
- dt / 1000, i);
- }
- *status = 0;
- for (i = 0; i < result_length + 1; i++) {
- TRACE_CATCH(ftape_command(QIC_REPORT_NEXT_BIT),);
- TRACE_CATCH(fdc_sense_drive_status(&st3),);
- if (i < result_length) {
- *status |= ((st3 & ST3_TRACK_0) ? 1 : 0) << i;
- } else if ((st3 & ST3_TRACK_0) == 0) {
- TRACE_ABORT(-EIO, ft_t_err, "missing status stop bit");
- }
- }
- /* this command will put track zero and index back into normal state */
- (void)ftape_command(QIC_REPORT_NEXT_BIT);
- TRACE_EXIT 0;
-}
-
-/* Report the current drive status. */
-
-int ftape_report_raw_drive_status(int *status)
-{
- int result;
- int count = 0;
- TRACE_FUN(ft_t_any);
-
- do {
- result = ftape_report_operation(status,
- QIC_REPORT_DRIVE_STATUS, 8);
- } while (result < 0 && ++count <= 3);
- if (result < 0) {
- TRACE_ABORT(-EIO, ft_t_err,
- "report_operation failed after %d trials", count);
- }
- if ((*status & 0xff) == 0xff) {
- TRACE_ABORT(-EIO, ft_t_err,
- "impossible drive status 0xff");
- }
- if (*status & QIC_STATUS_READY) {
- ftape_current_command = QIC_NO_COMMAND; /* completed */
- }
- ft_last_status.status.drive_status = (__u8)(*status & 0xff);
- TRACE_EXIT 0;
-}
-
-int ftape_report_drive_status(int *status)
-{
- TRACE_FUN(ft_t_any);
-
- TRACE_CATCH(ftape_report_raw_drive_status(status),);
- if (*status & QIC_STATUS_NEW_CARTRIDGE ||
- !(*status & QIC_STATUS_CARTRIDGE_PRESENT)) {
- ft_failure = 1; /* will inhibit further operations */
- TRACE_EXIT -EIO;
- }
- if (*status & QIC_STATUS_READY && *status & QIC_STATUS_ERROR) {
- /* Let caller handle all errors */
- TRACE_ABORT(1, ft_t_warn, "warning: error status set!");
- }
- TRACE_EXIT 0;
-}
-
-int ftape_report_error(unsigned int *error,
- qic117_cmd_t *command, int report)
-{
- static const ftape_error ftape_errors[] = QIC117_ERRORS;
- int code;
- TRACE_FUN(ft_t_any);
-
- TRACE_CATCH(ftape_report_operation(&code, QIC_REPORT_ERROR_CODE, 16),);
- *error = (unsigned int)(code & 0xff);
- *command = (qic117_cmd_t)((code>>8)&0xff);
- /* remember hardware status, maybe useful for status ioctls
- */
- ft_last_error.error.command = (__u8)*command;
- ft_last_error.error.error = (__u8)*error;
- if (!report) {
- TRACE_EXIT 0;
- }
- if (*error == 0) {
- TRACE_ABORT(0, ft_t_info, "No error");
- }
- TRACE(ft_t_info, "errorcode: %d", *error);
- if (*error < NR_ITEMS(ftape_errors)) {
- TRACE(ft_t_noise, "%sFatal ERROR:",
- (ftape_errors[*error].fatal ? "" : "Non-"));
- TRACE(ft_t_noise, "%s ...", ftape_errors[*error].message);
- } else {
- TRACE(ft_t_noise, "Unknown ERROR !");
- }
- if ((unsigned int)*command < NR_ITEMS(qic117_cmds) &&
- qic117_cmds[*command].name != NULL) {
- TRACE(ft_t_noise, "... caused by command \'%s\'",
- qic117_cmds[*command].name);
- } else {
- TRACE(ft_t_noise, "... caused by unknown command %d",
- *command);
- }
- TRACE_EXIT 0;
-}
-
-int ftape_report_configuration(qic_model *model,
- unsigned int *rate,
- int *qic_std,
- int *tape_len)
-{
- int result;
- int config;
- int status;
- static const unsigned int qic_rates[ 4] = { 250, 2000, 500, 1000 };
- TRACE_FUN(ft_t_any);
-
- result = ftape_report_operation(&config,
- QIC_REPORT_DRIVE_CONFIGURATION, 8);
- if (result < 0) {
- ft_last_status.status.drive_config = (__u8)0x00;
- *model = prehistoric;
- *rate = 500;
- *qic_std = QIC_TAPE_QIC40;
- *tape_len = 205;
- TRACE_EXIT 0;
- } else {
- ft_last_status.status.drive_config = (__u8)(config & 0xff);
- }
- *rate = qic_rates[(config & QIC_CONFIG_RATE_MASK) >> QIC_CONFIG_RATE_SHIFT];
- result = ftape_report_operation(&status, QIC_REPORT_TAPE_STATUS, 8);
- if (result < 0) {
- ft_last_status.status.tape_status = (__u8)0x00;
- /* pre- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is valid.
- */
- *qic_std = (config & QIC_CONFIG_80) ?
- QIC_TAPE_QIC80 : QIC_TAPE_QIC40;
- /* ?? how's about 425ft tapes? */
- *tape_len = (config & QIC_CONFIG_LONG) ? 307 : 0;
- *model = pre_qic117c;
- result = 0;
- } else {
- ft_last_status.status.tape_status = (__u8)(status & 0xff);
- *model = post_qic117b;
- TRACE(ft_t_any, "report tape status result = %02x", status);
- /* post- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is
- * invalid.
- */
- switch (status & QIC_TAPE_STD_MASK) {
- case QIC_TAPE_QIC40:
- case QIC_TAPE_QIC80:
- case QIC_TAPE_QIC3020:
- case QIC_TAPE_QIC3010:
- *qic_std = status & QIC_TAPE_STD_MASK;
- break;
- default:
- *qic_std = -1;
- break;
- }
- switch (status & QIC_TAPE_LEN_MASK) {
- case QIC_TAPE_205FT:
- /* 205 or 425+ ft 550 Oe tape */
- *tape_len = 0;
- break;
- case QIC_TAPE_307FT:
- /* 307.5 ft 550 Oe Extended Length (XL) tape */
- *tape_len = 307;
- break;
- case QIC_TAPE_VARIABLE:
- /* Variable length 550 Oe tape */
- *tape_len = 0;
- break;
- case QIC_TAPE_1100FT:
- /* 1100 ft 550 Oe tape */
- *tape_len = 1100;
- break;
- case QIC_TAPE_FLEX:
- /* Variable length 900 Oe tape */
- *tape_len = 0;
- break;
- default:
- *tape_len = -1;
- break;
- }
- if (*qic_std == -1 || *tape_len == -1) {
- TRACE(ft_t_any,
- "post qic-117b spec drive with unknown tape");
- }
- result = *tape_len == -1 ? -EIO : 0;
- if (status & QIC_TAPE_WIDE) {
- switch (*qic_std) {
- case QIC_TAPE_QIC80:
- TRACE(ft_t_info, "TR-1 tape detected");
- break;
- case QIC_TAPE_QIC3010:
- TRACE(ft_t_info, "TR-2 tape detected");
- break;
- case QIC_TAPE_QIC3020:
- TRACE(ft_t_info, "TR-3 tape detected");
- break;
- default:
- TRACE(ft_t_warn,
- "Unknown Travan tape type detected");
- break;
- }
- }
- }
- TRACE_EXIT (result < 0) ? -EIO : 0;
-}
-
-static int ftape_report_rom_version(int *version)
-{
-
- if (ftape_report_operation(version, QIC_REPORT_ROM_VERSION, 8) < 0) {
- return -EIO;
- } else {
- return 0;
- }
-}
-
-void ftape_report_vendor_id(unsigned int *id)
-{
- int result;
- TRACE_FUN(ft_t_any);
-
- /* We'll try to get a vendor id from the drive. First
- * according to the QIC-117 spec, a 16-bit id is requested.
- * If that fails we'll try an 8-bit version, otherwise we'll
- * try an undocumented query.
- */
- result = ftape_report_operation((int *) id, QIC_REPORT_VENDOR_ID, 16);
- if (result < 0) {
- result = ftape_report_operation((int *) id,
- QIC_REPORT_VENDOR_ID, 8);
- if (result < 0) {
- /* The following is an undocumented call found
- * in the CMS code.
- */
- result = ftape_report_operation((int *) id, 24, 8);
- if (result < 0) {
- *id = UNKNOWN_VENDOR;
- } else {
- TRACE(ft_t_noise, "got old 8 bit id: %04x",
- *id);
- *id |= 0x20000;
- }
- } else {
- TRACE(ft_t_noise, "got 8 bit id: %04x", *id);
- *id |= 0x10000;
- }
- } else {
- TRACE(ft_t_noise, "got 16 bit id: %04x", *id);
- }
- if (*id == 0x0047) {
- int version;
- int sign;
-
- if (ftape_report_rom_version(&version) < 0) {
- TRACE(ft_t_bug, "report rom version failed");
- TRACE_EXIT;
- }
- TRACE(ft_t_noise, "CMS rom version: %d", version);
- ftape_command(QIC_ENTER_DIAGNOSTIC_1);
- ftape_command(QIC_ENTER_DIAGNOSTIC_1);
- diagnostic_mode = 1;
- if (ftape_report_operation(&sign, 9, 8) < 0) {
- unsigned int error;
- qic117_cmd_t command;
-
- ftape_report_error(&error, &command, 1);
- ftape_command(QIC_ENTER_PRIMARY_MODE);
- diagnostic_mode = 0;
- TRACE_EXIT; /* failure ! */
- } else {
- TRACE(ft_t_noise, "CMS signature: %02x", sign);
- }
- if (sign == 0xa5) {
- result = ftape_report_operation(&sign, 37, 8);
- if (result < 0) {
- if (version >= 63) {
- *id = 0x8880;
- TRACE(ft_t_noise,
- "This is an Iomega drive !");
- } else {
- *id = 0x0047;
- TRACE(ft_t_noise,
- "This is a real CMS drive !");
- }
- } else {
- *id = 0x0047;
- TRACE(ft_t_noise, "CMS status: %d", sign);
- }
- } else {
- *id = UNKNOWN_VENDOR;
- }
- ftape_command(QIC_ENTER_PRIMARY_MODE);
- diagnostic_mode = 0;
- }
- TRACE_EXIT;
-}
-
-static int qic_rate_code(unsigned int rate)
-{
- switch (rate) {
- case 250:
- return QIC_CONFIG_RATE_250;
- case 500:
- return QIC_CONFIG_RATE_500;
- case 1000:
- return QIC_CONFIG_RATE_1000;
- case 2000:
- return QIC_CONFIG_RATE_2000;
- default:
- return QIC_CONFIG_RATE_500;
- }
-}
-
-static int ftape_set_rate_test(unsigned int *max_rate)
-{
- unsigned int error;
- qic117_cmd_t command;
- int status;
- int supported = 0;
- TRACE_FUN(ft_t_any);
-
- /* Check if the drive does support the select rate command
- * by testing all different settings. If any one is accepted
- * we assume the command is supported, else not.
- */
- for (*max_rate = 2000; *max_rate >= 250; *max_rate /= 2) {
- if (ftape_command(QIC_SELECT_RATE) < 0) {
- continue;
- }
- if (ftape_parameter_wait(qic_rate_code(*max_rate),
- 1 * FT_SECOND, &status) < 0) {
- continue;
- }
- if (status & QIC_STATUS_ERROR) {
- ftape_report_error(&error, &command, 0);
- continue;
- }
- supported = 1; /* did accept a request */
- break;
- }
- TRACE(ft_t_noise, "Select Rate command is%s supported",
- supported ? "" : " not");
- TRACE_EXIT supported;
-}
-
-int ftape_set_data_rate(unsigned int new_rate /* Kbps */, unsigned int qic_std)
-{
- int status;
- int result = 0;
- unsigned int data_rate = new_rate;
- static int supported;
- int rate_changed = 0;
- qic_model dummy_model;
- unsigned int dummy_qic_std, dummy_tape_len;
- TRACE_FUN(ft_t_any);
-
- if (ft_drive_max_rate == 0) { /* first time */
- supported = ftape_set_rate_test(&ft_drive_max_rate);
- }
- if (supported) {
- ftape_command(QIC_SELECT_RATE);
- result = ftape_parameter_wait(qic_rate_code(new_rate),
- 1 * FT_SECOND, &status);
- if (result >= 0 && !(status & QIC_STATUS_ERROR)) {
- rate_changed = 1;
- }
- }
- TRACE_CATCH(result = ftape_report_configuration(&dummy_model,
- &data_rate,
- &dummy_qic_std,
- &dummy_tape_len),);
- if (data_rate != new_rate) {
- if (!supported) {
- TRACE(ft_t_warn, "Rate change not supported!");
- } else if (rate_changed) {
- TRACE(ft_t_warn, "Requested: %d, got %d",
- new_rate, data_rate);
- } else {
- TRACE(ft_t_warn, "Rate change failed!");
- }
- result = -EINVAL;
- }
- /*
- * Set data rate and write precompensation as specified:
- *
- * | QIC-40/80 | QIC-3010/3020
- * rate | precomp | precomp
- * ----------+-------------+--------------
- * 250 Kbps. | 250 ns. | 0 ns.
- * 500 Kbps. | 125 ns. | 0 ns.
- * 1 Mbps. | 42 ns. | 0 ns.
- * 2 Mbps | N/A | 0 ns.
- */
- if ((qic_std == QIC_TAPE_QIC40 && data_rate > 500) ||
- (qic_std == QIC_TAPE_QIC80 && data_rate > 1000)) {
- TRACE_ABORT(-EINVAL,
- ft_t_warn, "Datarate too high for QIC-mode");
- }
- TRACE_CATCH(fdc_set_data_rate(data_rate),_res = -EINVAL);
- ft_data_rate = data_rate;
- if (qic_std == QIC_TAPE_QIC40 || qic_std == QIC_TAPE_QIC80) {
- switch (data_rate) {
- case 250:
- fdc_set_write_precomp(250);
- break;
- default:
- case 500:
- fdc_set_write_precomp(125);
- break;
- case 1000:
- fdc_set_write_precomp(42);
- break;
- }
- } else {
- fdc_set_write_precomp(0);
- }
- TRACE_EXIT result;
-}
-
-/* The next two functions are used to cope with excessive overrun errors
- */
-int ftape_increase_threshold(void)
-{
- TRACE_FUN(ft_t_flow);
-
- if (fdc.type < i82077 || ft_fdc_threshold >= 12) {
- TRACE_ABORT(-EIO, ft_t_err, "cannot increase fifo threshold");
- }
- if (fdc_fifo_threshold(++ft_fdc_threshold, NULL, NULL, NULL) < 0) {
- TRACE(ft_t_err, "cannot increase fifo threshold");
- ft_fdc_threshold --;
- fdc_reset();
- }
- TRACE(ft_t_info, "New FIFO threshold: %d", ft_fdc_threshold);
- TRACE_EXIT 0;
-}
-
-int ftape_half_data_rate(void)
-{
- if (ft_data_rate < 500) {
- return -1;
- }
- if (ftape_set_data_rate(ft_data_rate / 2, ft_qic_std) < 0) {
- return -EIO;
- }
- ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len);
- return 0;
-}
-
-/* Seek the head to the specified track.
- */
-int ftape_seek_head_to_track(unsigned int track)
-{
- int status;
- TRACE_FUN(ft_t_any);
-
- ft_location.track = -1; /* remains set in case of error */
- if (track >= ft_tracks_per_tape) {
- TRACE_ABORT(-EINVAL, ft_t_bug, "track out of bounds");
- }
- TRACE(ft_t_flow, "seeking track %d", track);
- TRACE_CATCH(ftape_command(QIC_SEEK_HEAD_TO_TRACK),);
- TRACE_CATCH(ftape_parameter_wait(track, ftape_timeout.head_seek,
- &status),);
- ft_location.track = track;
- ftape_might_be_off_track = 0;
- TRACE_EXIT 0;
-}
-
-int ftape_wakeup_drive(wake_up_types method)
-{
- int status;
- int motor_on = 0;
- TRACE_FUN(ft_t_any);
-
- switch (method) {
- case wake_up_colorado:
- TRACE_CATCH(ftape_command(QIC_PHANTOM_SELECT),);
- TRACE_CATCH(ftape_parameter(0 /* ft_drive_sel ?? */),);
- break;
- case wake_up_mountain:
- TRACE_CATCH(ftape_command(QIC_SOFT_SELECT),);
- ftape_sleep(FT_MILLISECOND); /* NEEDED */
- TRACE_CATCH(ftape_parameter(18),);
- break;
- case wake_up_insight:
- ftape_sleep(100 * FT_MILLISECOND);
- motor_on = 1;
- fdc_motor(motor_on); /* enable is done by motor-on */
- case no_wake_up:
- break;
- default:
- TRACE_EXIT -ENODEV; /* unknown wakeup method */
- break;
- }
- /* If wakeup succeeded we shouldn't get an error here..
- */
- TRACE_CATCH(ftape_report_raw_drive_status(&status),
- if (motor_on) {
- fdc_motor(0);
- });
- TRACE_EXIT 0;
-}
-
-int ftape_put_drive_to_sleep(wake_up_types method)
-{
- TRACE_FUN(ft_t_any);
-
- switch (method) {
- case wake_up_colorado:
- TRACE_CATCH(ftape_command(QIC_PHANTOM_DESELECT),);
- break;
- case wake_up_mountain:
- TRACE_CATCH(ftape_command(QIC_SOFT_DESELECT),);
- break;
- case wake_up_insight:
- fdc_motor(0); /* enable is done by motor-on */
- case no_wake_up: /* no wakeup / no sleep ! */
- break;
- default:
- TRACE_EXIT -ENODEV; /* unknown wakeup method */
- }
- TRACE_EXIT 0;
-}
-
-int ftape_reset_drive(void)
-{
- int result = 0;
- int status;
- unsigned int err_code;
- qic117_cmd_t err_command;
- int i;
- TRACE_FUN(ft_t_any);
-
- /* We want to re-establish contact with our drive. Fire a
- * number of reset commands (single step pulses) and pray for
- * success.
- */
- for (i = 0; i < 2; ++i) {
- TRACE(ft_t_flow, "Resetting fdc");
- fdc_reset();
- ftape_sleep(10 * FT_MILLISECOND);
- TRACE(ft_t_flow, "Reset command to drive");
- result = ftape_command(QIC_RESET);
- if (result == 0) {
- ftape_sleep(1 * FT_SECOND); /* drive not
- * accessible
- * during 1 second
- */
- TRACE(ft_t_flow, "Re-selecting drive");
-
- /* Strange, the QIC-117 specs don't mention
- * this but the drive gets deselected after a
- * soft reset ! So we need to enable it
- * again.
- */
- if (ftape_wakeup_drive(ft_drive_type.wake_up) < 0) {
- TRACE(ft_t_err, "Wakeup failed !");
- }
- TRACE(ft_t_flow, "Waiting until drive gets ready");
- result= ftape_ready_wait(ftape_timeout.reset, &status);
- if (result == 0 && (status & QIC_STATUS_ERROR)) {
- result = ftape_report_error(&err_code,
- &err_command, 1);
- if (result == 0 && err_code == 27) {
- /* Okay, drive saw reset
- * command and responded as it
- * should
- */
- break;
- } else {
- result = -EIO;
- }
- } else {
- result = -EIO;
- }
- }
- FT_SIGNAL_EXIT(_DONT_BLOCK);
- }
- if (result != 0) {
- TRACE(ft_t_err, "General failure to reset tape drive");
- } else {
- /* Restore correct settings: keep original rate
- */
- ftape_set_data_rate(ft_data_rate, ft_qic_std);
- }
- ftape_init_drive_needed = 1;
- TRACE_EXIT result;
-}