diff options
Diffstat (limited to 'arch')
316 files changed, 5636 insertions, 1393 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d3f5674bece..3b70eb4c323 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -191,6 +191,22 @@ config VECTORS_BASE help The base address of exception vectors. +config ARM_PATCH_PHYS_VIRT + bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on !XIP_KERNEL && !THUMB2_KERNEL && MMU + depends on !ARCH_REALVIEW || !SPARSEMEM + help + Patch phys-to-virt translation functions at runtime according to + the position of the kernel in system memory. + + This can only be used with non-XIP, non-Thumb2, MMU kernels where + the base of physical memory is at a 16MB boundary. + +config ARM_PATCH_PHYS_VIRT_16BIT + def_bool y + depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -1178,6 +1194,31 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + +config ARM_ERRATA_753970 + bool "ARM errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + endmenu source "arch/arm/common/Kconfig" @@ -1393,7 +1434,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9c430525e13..e681e34df42 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S +OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index ab204db594d..c6028967d33 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,3 +1,7 @@ font.c -piggy.gz +lib1funcs.S +piggy.gzip +piggy.lzo +piggy.lzma +vmlinux vmlinux.lds diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ae890caa17a..9f2c5bd5fbc 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -291,3 +291,7 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_OMAP_SMARTREFLEX=y +CONFIG_OMAP_SMARTREFLEX_CLASS3=y diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 5aeec1e1735..16bd4803158 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -36,6 +36,7 @@ #define L2X0_RAW_INTR_STAT 0x21C #define L2X0_INTR_CLEAR 0x220 #define L2X0_CACHE_SYNC 0x730 +#define L2X0_DUMMY_REG 0x740 #define L2X0_INV_LINE_PA 0x770 #define L2X0_INV_WAY 0x77C #define L2X0_CLEAN_LINE_PA 0x7B0 diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index a101f10bb5b..e0d1c0cfa54 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,8 +50,17 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC +#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) +#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) + +#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) +#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) + static inline void sysctl_soft_reset(void __iomem *base) { + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + /* writing any value to SCSYSSTAT reg will reset system */ writel(0, base + SCSYSSTAT); } diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 20e0f7c9e03..d66605dea55 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } +/* IO barriers */ +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + /* * Now, pick up the machine-defined IO definitions */ @@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr) * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) +#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); }) +#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)); }) +#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)); }) -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; }) #define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) + __raw_readw(__io(p))); __iormb(); __v; }) #define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) + __raw_readl(__io(p))); __iormb(); __v; }) #define outsb(p,d,l) __raw_writesb(__io(p),d,l) #define outsw(p,d,l) __raw_writesw(__io(p),d,l) @@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ cpu_to_le32(v),__mem_pci(c))) -#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 23c2e8e5c0f..431077c5a86 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <linux/const.h> +#include <linux/types.h> #include <mach/memory.h> #include <asm/sizes.h> @@ -133,20 +134,10 @@ #endif /* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ -#ifndef __virt_to_phys -#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif - -/* * Convert a physical address to a Page Frame Number and back */ -#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) +#define __phys_to_pfn(paddr) ((unsigned long)((paddr) >> PAGE_SHIFT)) +#define __pfn_to_phys(pfn) ((phys_addr_t)(pfn) << PAGE_SHIFT) /* * Convert a page to/from a physical address @@ -157,6 +148,62 @@ #ifndef __ASSEMBLY__ /* + * Physical vs virtual RAM address space conversion. These are + * private definitions which should NOT be used outside memory.h + * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. + */ +#ifndef __virt_to_phys +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + +/* + * Constants used to force the right instruction encodings and shifts + * so that all we need to do is modify the 8-bit constant field. + */ +#define __PV_BITS_31_24 0x81000000 +#define __PV_BITS_23_16 0x00810000 + +extern unsigned long __pv_phys_offset; +#define PHYS_OFFSET __pv_phys_offset + +#define __pv_stub(from,to,instr,type) \ + __asm__("@ __pv_stub\n" \ + "1: " instr " %0, %1, %2\n" \ + " .pushsection .pv_table,\"a\"\n" \ + " .long 1b\n" \ + " .popsection\n" \ + : "=r" (to) \ + : "r" (from), "I" (type)) + +static inline unsigned long __virt_to_phys(unsigned long x) +{ + unsigned long t; + __pv_stub(x, t, "add", __PV_BITS_31_24); +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + __pv_stub(t, t, "add", __PV_BITS_23_16); +#endif + return t; +} + +static inline unsigned long __phys_to_virt(unsigned long x) +{ + unsigned long t; + __pv_stub(x, t, "sub", __PV_BITS_31_24); +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + __pv_stub(t, t, "sub", __PV_BITS_23_16); +#endif + return t; +} +#else +#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) +#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) +#endif +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET PLAT_PHYS_OFFSET +#endif + +/* * The DMA mask corresponding to the maximum bus address allocatable * using GFP_DMA. The default here places no restriction on DMA * allocations. This must be the smallest DMA mask in the system, @@ -188,12 +235,12 @@ * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ -static inline unsigned long virt_to_phys(void *x) +static inline phys_addr_t virt_to_phys(const volatile void *x) { return __virt_to_phys((unsigned long)(x)); } -static inline void *phys_to_virt(unsigned long x) +static inline void *phys_to_virt(phys_addr_t x) { return (void *)(__phys_to_virt((unsigned long)(x))); } diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 12c8e680cbf..a2b775b81cf 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -25,8 +25,23 @@ struct mod_arch_specific { }; /* - * Include the ARM architecture version. + * Add the ARM architecture version to the version magic string */ -#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " " +#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " " + +/* Add __virt_to_phys patching state as well */ +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT +#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " +#else +#define MODULE_ARCH_VERMAGIC_P2V "p2v8 " +#endif +#else +#define MODULE_ARCH_VERMAGIC_P2V "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_ARCH_VERMAGIC_ARMVSN \ + MODULE_ARCH_VERMAGIC_P2V #endif /* _ASM_ARM_MODULE_H */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 8ccea012722..7544ce6b481 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,11 +12,25 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ +#include <linux/interrupt.h> + enum arm_pmu_type { ARM_PMU_DEVICE_CPU = 0, ARM_NUM_PMU_DEVICES, }; +/* + * struct arm_pmu_platdata - ARM PMU platform data + * + * @handle_irq: an optional handler which will be called from the interrupt and + * passed the address of the low level handler, and can be used to implement + * any platform specific handling before or after calling it. + */ +struct arm_pmu_platdata { + irqreturn_t (*handle_irq)(int irq, void *dev, + irq_handler_t pmu_handler); +}; + #ifdef CONFIG_CPU_HAS_PMU /** diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f41a6f57cd1..82dfe5d0c41 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -18,16 +18,34 @@ #define __ASMARM_TLB_H #include <asm/cacheflush.h> -#include <asm/tlbflush.h> #ifndef CONFIG_MMU #include <linux/pagemap.h> + +#define tlb_flush(tlb) ((void) tlb) + #include <asm-generic/tlb.h> #else /* !CONFIG_MMU */ +#include <linux/swap.h> #include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +/* + * We need to delay page freeing for SMP as other CPUs can access pages + * which have been removed but not yet had their TLB entries invalidated. + * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, + * we need to apply this same delaying tactic to ensure correct operation. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) +#define tlb_fast_mode(tlb) 0 +#define FREE_PTE_NR 500 +#else +#define tlb_fast_mode(tlb) 1 +#define FREE_PTE_NR 0 +#endif /* * TLB handling. This allows us to remove pages from the page @@ -36,12 +54,58 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + struct vm_area_struct *vma; unsigned long range_start; unsigned long range_end; + unsigned int nr; + struct page *pages[FREE_PTE_NR]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); +/* + * This is unnecessarily complex. There's three ways the TLB shootdown + * code is used: + * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). + * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. + * 2. Unmapping all vmas. See exit_mmap(). + * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. Additionally, page tables will be freed. + * 3. Unmapping argument pages. See shift_arg_pages(). + * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called. + * tlb->vma will be NULL. + */ +static inline void tlb_flush(struct mmu_gather *tlb) +{ + if (tlb->fullmm || !tlb->vma) + flush_tlb_mm(tlb->mm); + else if (tlb->range_end > 0) { + flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } +} + +static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush(tlb); + if (!tlb_fast_mode(tlb)) { + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + } +} + static inline struct mmu_gather * tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) { @@ -49,6 +113,8 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) tlb->mm = mm; tlb->fullmm = full_mm_flush; + tlb->vma = NULL; + tlb->nr = 0; return tlb; } @@ -56,8 +122,7 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ check_pgt_cache(); @@ -71,12 +136,7 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) { - if (!tlb->fullmm) { - if (addr < tlb->range_start) - tlb->range_start = addr; - if (addr + PAGE_SIZE > tlb->range_end) - tlb->range_end = addr + PAGE_SIZE; - } + tlb_add_flush(tlb, addr); } /* @@ -89,6 +149,7 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->vma = vma; tlb->range_start = TASK_SIZE; tlb->range_end = 0; } @@ -97,12 +158,30 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm && tlb->range_end > 0) - flush_tlb_range(vma, tlb->range_start, tlb->range_end); + if (!tlb->fullmm) + tlb_flush(tlb); +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (tlb_fast_mode(tlb)) { + free_page_and_swap_cache(page); + } else { + tlb->pages[tlb->nr++] = page; + if (tlb->nr >= FREE_PTE_NR) + tlb_flush_mmu(tlb); + } +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long addr) +{ + pgtable_page_dtor(pte); + tlb_add_flush(tlb, addr); + tlb_remove_page(tlb, pte); } -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index ce7378ea15a..d2005de383b 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -10,12 +10,7 @@ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ +#ifdef CONFIG_MMU #include <asm/glue.h> diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index d5d4185f0c2..acca35aebe2 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -164,3 +164,7 @@ EXPORT_SYMBOL(mcount); #endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif + +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +EXPORT_SYMBOL(__pv_phys_offset); +#endif diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 8f57515bbdb..c84b57d27d0 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -25,83 +25,6 @@ * machine ID for example). */ __HEAD -__error_a: -#ifdef CONFIG_DEBUG_LL - mov r4, r1 @ preserve machine ID - adr r0, str_a1 - bl printascii - mov r0, r4 - bl printhex8 - adr r0, str_a2 - bl printascii - adr r3, __lookup_machine_type_data - ldmia r3, {r4, r5, r6} @ get machine desc list - sub r4, r3, r4 @ get offset between virt&phys - add r5, r5, r4 @ convert virt addresses to - add r6, r6, r4 @ physical address space -1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type - bl printhex8 - mov r0, #'\t' - bl printch - ldr r0, [r5, #MACHINFO_NAME] @ get machine name - add r0, r0, r4 - bl printascii - mov r0, #'\n' - bl printch - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - adr r0, str_a3 - bl printascii - b __error -ENDPROC(__error_a) - -str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" -str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" -str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" - .align -#else - b __error -#endif - -/* - * Lookup machine architecture in the linker-build list of architectures. - * Note that we can't use the absolute addresses for the __arch_info - * lists since we aren't running with the MMU on (and therefore, we are - * not in the correct address space). We have to calculate the offset. - * - * r1 = machine architecture number - * Returns: - * r3, r4, r6 corrupted - * r5 = mach_info pointer in physical address space - */ -__lookup_machine_type: - adr r3, __lookup_machine_type_data - ldmia r3, {r4, r5, r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type - teq r3, r1 @ matches loader number? - beq 2f @ found - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown machine -2: mov pc, lr -ENDPROC(__lookup_machine_type) - -/* - * Look in arch/arm/kernel/arch.[ch] for information about the - * __arch_info structures. - */ - .align 2 - .type __lookup_machine_type_data, %object -__lookup_machine_type_data: - .long . - .long __arch_info_begin - .long __arch_info_end - .size __lookup_machine_type_data, . - __lookup_machine_type_data /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and @@ -109,8 +32,6 @@ __lookup_machine_type_data: * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * - * r8 = machinfo - * * Returns: * r2 either valid atags pointer, or zero * r5, r6 corrupted @@ -185,17 +106,6 @@ __mmap_switched_data: .size __mmap_switched_data, . - __mmap_switched_data /* - * This provides a C-API version of __lookup_machine_type - */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} -ENDPROC(lookup_machine_type) - -/* * This provides a C-API version of __lookup_processor_type */ ENTRY(lookup_processor_type) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 814ce1a7327..6b1e0ad9ec3 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -44,9 +44,6 @@ ENTRY(stext) bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' - bl __lookup_machine_type @ r5=machinfo - movs r8, r5 @ invalid machine (r5=0)? - beq __error_a @ yes, error 'a' adr lr, BSYM(__after_proc_init) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f17d9a09e8f..8f96ca067eb 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -26,14 +26,6 @@ #include <mach/debug-macro.S> #endif -#if (PHYS_OFFSET & 0x001fffff) -#error "PHYS_OFFSET must be at an even 2MiB boundary!" -#endif - -#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) -#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) - - /* * swapper_pg_dir is the virtual address of the initial page table. * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must @@ -41,6 +33,7 @@ * the least significant 16 bits to be 0x8000, but we could probably * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. */ +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif @@ -48,8 +41,8 @@ .globl swapper_pg_dir .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 - .macro pgtbl, rd - ldr \rd, =(KERNEL_RAM_PADDR - 0x4000) + .macro pgtbl, rd, phys + add \rd, \phys, #TEXT_OFFSET - 0x4000 .endm #ifdef CONFIG_XIP_KERNEL @@ -87,25 +80,33 @@ ENTRY(stext) movs r10, r5 @ invalid processor (r5=0)? THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' - bl __lookup_machine_type @ r5=machinfo - movs r8, r5 @ invalid machine (r5=0)? - THUMB( it eq ) @ force fixup-able long branch encoding - beq __error_a @ yes, error 'a' + +#ifndef CONFIG_XIP_KERNEL + adr r3, 2f + ldmia r3, {r4, r8} + sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) + add r8, r8, r4 @ PHYS_OFFSET +#else + ldr r8, =PLAT_PHYS_OFFSET +#endif /* * r1 = machine no, r2 = atags, - * r8 = machinfo, r9 = cpuid, r10 = procinfo + * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags #ifdef CONFIG_SMP_ON_UP bl __fixup_smp #endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + bl __fixup_pv_table +#endif bl __create_page_tables /* * The following calls CPU specific code in a position independent * manner. See arch/arm/mm/proc-*.S for details. r10 = base of - * xxx_proc_info structure selected by __lookup_machine_type + * xxx_proc_info structure selected by __lookup_processor_type * above. On return, the CPU will be ready for the MMU to be * turned on, and r0 will hold the CPU control register value. */ @@ -118,22 +119,24 @@ ENTRY(stext) 1: b __enable_mmu ENDPROC(stext) .ltorg +#ifndef CONFIG_XIP_KERNEL +2: .long . + .long PAGE_OFFSET +#endif /* * Setup the initial page tables. We only setup the barest * amount which are required to get the kernel running, which * generally means mapping in the kernel code. * - * r8 = machinfo - * r9 = cpuid - * r10 = procinfo + * r8 = phys_offset, r9 = cpuid, r10 = procinfo * * Returns: * r0, r3, r5-r7 corrupted * r4 = physical page table address */ __create_page_tables: - pgtbl r4 @ page table address + pgtbl r4, r8 @ page table address /* * Clear the 16K level 1 swapper page table @@ -189,10 +192,8 @@ __create_page_tables: /* * Map some ram to cover our .data and .bss areas. */ - orr r3, r7, #(KERNEL_RAM_PADDR & 0xff000000) - .if (KERNEL_RAM_PADDR & 0x00f00000) - orr r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000) - .endif + add r3, r8, #TEXT_OFFSET + orr r3, r3, r7 add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! ldr r6, =(_end - 1) @@ -205,14 +206,17 @@ __create_page_tables: #endif /* - * Then map first 1MB of ram in case it contains our boot params. + * Then map boot params address in r2 or + * the first 1MB of ram if boot params address is not specified. */ - add r0, r4, #PAGE_OFFSET >> 18 - orr r6, r7, #(PHYS_OFFSET & 0xff000000) - .if (PHYS_OFFSET & 0x00f00000) - orr r6, r6, #(PHYS_OFFSET & 0x00f00000) - .endif - str r6, [r0] + mov r0, r2, lsr #20 + movs r0, r0, lsl #20 + moveq r0, r8 + sub r3, r0, r8 + add r3, r3, #PAGE_OFFSET + add r3, r4, r3, lsr #18 + orr r6, r7, r0 + str r6, [r3] #ifdef CONFIG_DEBUG_LL #ifndef CONFIG_DEBUG_ICEDCC @@ -391,25 +395,24 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP + __INIT __fixup_smp: - mov r4, #0x00070000 - orr r3, r4, #0xff000000 @ mask 0xff070000 - orr r4, r4, #0x41000000 @ val 0x41070000 - and r0, r9, r3 - teq r0, r4 @ ARM CPU and ARMv6/v7? + and r3, r9, #0x000f0000 @ architecture version + teq r3, #0x000f0000 @ CPU ID supported? bne __fixup_smp_on_up @ no, assume UP - orr r3, r3, #0x0000ff00 - orr r3, r3, #0x000000f0 @ mask 0xff07fff0 + bic r3, r9, #0x00ff0000 + bic r3, r3, #0x0000000f @ mask 0xff00fff0 + mov r4, #0x41000000 orr r4, r4, #0x0000b000 - orr r4, r4, #0x00000020 @ val 0x4107b020 - and r0, r9, r3 - teq r0, r4 @ ARM 11MPCore? + orr r4, r4, #0x00000020 @ val 0x4100b020 + teq r3, r4 @ ARM 11MPCore? moveq pc, lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR - tst r0, #1 << 31 - movne pc, lr @ bit 31 => SMP + and r0, r0, #0xc0000000 @ multiprocessing extensions and + teq r0, #0x80000000 @ not part of a uniprocessor system? + moveq pc, lr @ yes, assume SMP __fixup_smp_on_up: adr r0, 1f @@ -417,18 +420,7 @@ __fixup_smp_on_up: sub r3, r0, r3 add r4, r4, r3 add r5, r5, r3 -2: cmp r4, r5 - movhs pc, lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) -#ifdef __ARMEB__ - THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. -#endif - THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. - THUMB( strh r6, [r0] ) - b 2b + b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align @@ -442,7 +434,109 @@ smp_on_up: ALT_SMP(.long 1) ALT_UP(.long 0) .popsection +#endif + + .text +__do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. +#endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) + +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +/* __fixup_pv_table - patch the stub instructions with the delta between + * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and + * can be expressed by an immediate shifter operand. The stub instruction + * has a form of '(add|sub) rd, rn, #imm'. + */ + __HEAD +__fixup_pv_table: + adr r0, 1f + ldmia r0, {r3-r5, r7} + sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET + add r4, r4, r3 @ adjust table start address + add r5, r5, r3 @ adjust table end address + str r8, [r7, r3]! @ save computed PHYS_OFFSET to __pv_phys_offset +#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + mov r6, r3, lsr #24 @ constant for add/sub instructions + teq r3, r6, lsl #24 @ must be 16MiB aligned +#else + mov r6, r3, lsr #16 @ constant for add/sub instructions + teq r3, r6, lsl #16 @ must be 64kiB aligned +#endif + bne __error + str r6, [r7, #4] @ save to __pv_offset + b __fixup_a_pv_table +ENDPROC(__fixup_pv_table) + + .align +1: .long . + .long __pv_table_begin + .long __pv_table_end +2: .long __pv_phys_offset + + .text +__fixup_a_pv_table: +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + and r0, r6, #255 @ offset bits 23-16 + mov r6, r6, lsr #8 @ offset bits 31-24 +#else + mov r0, #0 @ just in case... +#endif + b 3f +2: ldr ip, [r7, r3] + bic ip, ip, #0x000000ff + tst ip, #0x400 @ rotate shift tells us LS or MS byte + orrne ip, ip, r6 @ mask in offset bits 31-24 + orreq ip, ip, r0 @ mask in offset bits 23-16 + str ip, [r7, r3] +3: cmp r4, r5 + ldrcc r7, [r4], #4 @ use branch for delay slot + bcc 2b + mov pc, lr +ENDPROC(__fixup_a_pv_table) + +ENTRY(fixup_pv_table) + stmfd sp!, {r4 - r7, lr} + ldr r2, 2f @ get address of __pv_phys_offset + mov r3, #0 @ no offset + mov r4, r0 @ r0 = table start + add r5, r0, r1 @ r1 = table size + ldr r6, [r2, #4] @ get __pv_offset + bl __fixup_a_pv_table + ldmfd sp!, {r4 - r7, pc} +ENDPROC(fixup_pv_table) + + .align +2: .long __pv_phys_offset + + .data + .globl __pv_phys_offset + .type __pv_phys_offset, %object +__pv_phys_offset: + .long 0 + .size __pv_phys_offset, . - __pv_phys_offset +__pv_offset: + .long 0 #endif #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index c9f3f046757..d600bd35070 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -137,11 +137,10 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), + "CPUID feature registers not supported. " + "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void) return debug_arch; } +static int debug_arch_supported(void) +{ + u8 arch = get_debug_arch(); + return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; +} + /* Determine number of BRP register available. */ static int get_num_brp_resources(void) { @@ -268,6 +273,9 @@ out: int hw_breakpoint_slots(int type) { + if (!debug_arch_supported()) + return 0; + /* * We can be called early, so don't rely on * our static variables being initialised. @@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused) /* * v7 debug contains save and restore registers so that debug state - * can be maintained across low-power modes without leaving - * the debug logic powered up. It is IMPLEMENTATION DEFINED whether - * we can write to the debug registers out of reset, so we must - * unlock the OS Lock Access Register to avoid taking undefined - * instruction exceptions later on. + * can be maintained across low-power modes without leaving the debug + * logic powered up. It is IMPLEMENTATION DEFINED whether we can access + * the debug registers out of reset, so we must unlock the OS Lock + * Access Register to avoid taking undefined instruction exceptions + * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { /* @@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void) debug_arch = get_debug_arch(); - if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + if (!debug_arch_supported()) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); return 0; } @@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void) pr_info("%d breakpoint(s) reserved for watchpoint " "single-step.\n", core_num_reserved_brps); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + on_each_cpu(reset_ctrl_regs, NULL, 1); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { + max_watchpoint_len = 4; pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of 4 bytes."); + "watchpoint size of %u bytes.", max_watchpoint_len); } else { - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(reset_ctrl_regs, NULL, 1); - reset_ctrl_regs(NULL); - /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); pr_info("maximum watchpoint size is %u bytes.\n", diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 2c1f0050c9c..8f6ed43861f 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1437,7 +1437,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) return space_cccc_1100_010x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0c400000) { + } else if ((insn & 0x0e000000) == 0x0c000000) { return space_cccc_110x(insn, asi); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..93010dc24b7 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/smp_plat.h> #include <asm/unwind.h> #ifdef CONFIG_XIP_KERNEL @@ -268,12 +269,29 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_pv_table(const void *, unsigned long); +extern void fixup_smp(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr *s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -315,6 +333,14 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); #endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + s = find_mod_section(hdr, sechdrs, ".pv_table"); + if (s) + fixup_pv_table((void *)s->sh_addr, s->sh_size); +#endif + s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); + if (s && !is_smp()) + fixup_smp((void *)s->sh_addr, s->sh_size); return 0; } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2f..22e194eb853 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -377,9 +377,18 @@ validate_group(struct perf_event *event) return 0; } +static irqreturn_t armpmu_platform_irq(int irq, void *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev); + + return plat->handle_irq(irq, dev, armpmu->handle_irq); +} + static int armpmu_reserve_hardware(void) { + struct arm_pmu_platdata *plat; + irq_handler_t handle_irq; int i, err = -ENODEV, irq; pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); @@ -390,6 +399,12 @@ armpmu_reserve_hardware(void) init_pmu(ARM_PMU_DEVICE_CPU); + plat = dev_get_platdata(&pmu_device->dev); + if (plat && plat->handle_irq) + handle_irq = armpmu_platform_irq; + else + handle_irq = armpmu->handle_irq; + if (pmu_device->num_resources < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; @@ -400,7 +415,7 @@ armpmu_reserve_hardware(void) if (irq < 0) continue; - err = request_irq(irq, armpmu->handle_irq, + err = request_irq(irq, handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, "armpmu", NULL); if (err) { @@ -700,7 +715,7 @@ user_backtrace(struct frame_tail __user *tail, * Frame pointers should strictly progress back up the stack * (towards higher addresses). */ - if (tail >= buftail.fp) + if (tail + 1 >= buftail.fp) return NULL; return buftail.fp - 1; diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index b8af96ea62e..2c79eec1926 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -97,28 +97,34 @@ set_irq_affinity(int irq, irq, cpu); return err; #else - return 0; + return -EINVAL; #endif } static int init_cpu_pmu(void) { - int i, err = 0; + int i, irqs, err = 0; struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - if (!pdev) { - err = -ENODEV; - goto out; - } + if (!pdev) + return -ENODEV; + + irqs = pdev->num_resources; + + /* + * If we have a single PMU interrupt that we can't shift, assume that + * we're running on a uniprocessor machine and continue. + */ + if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) + return 0; - for (i = 0; i < pdev->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { err = set_irq_affinity(platform_get_irq(pdev, i), i); if (err) break; } -out: return err; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 420b8d6485d..130e44e96e3 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -226,8 +226,8 @@ int cpu_architecture(void) * Register 0 and check for VMSAv7 or PMSAv7 */ asm("mrc p15, 0, %0, c0, c1, 4" : "=r" (mmfr0)); - if ((mmfr0 & 0x0000000f) == 0x00000003 || - (mmfr0 & 0x000000f0) == 0x00000030) + if ((mmfr0 & 0x0000000f) >= 0x00000003 || + (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; else if ((mmfr0 & 0x0000000f) == 0x00000002 || (mmfr0 & 0x000000f0) == 0x00000020) @@ -308,7 +308,44 @@ static void __init cacheid_init(void) * already provide the required functionality. */ extern struct proc_info_list *lookup_processor_type(unsigned int); -extern struct machine_desc *lookup_machine_type(unsigned int); + +static void __init early_print(const char *str, ...) +{ + extern void printascii(const char *); + char buf[256]; + va_list ap; + + va_start(ap, str); + vsnprintf(buf, sizeof(buf), str, ap); + va_end(ap); + +#ifdef CONFIG_DEBUG_LL + printascii(buf); +#endif + printk("%s", buf); +} + +static struct machine_desc * __init lookup_machine_type(unsigned int type) +{ + extern struct machine_desc __arch_info_begin[], __arch_info_end[]; + struct machine_desc *p; + + for (p = __arch_info_begin; p < __arch_info_end; p++) + if (type == p->nr) + return p; + + early_print("\n" + "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" + "Available machine support:\n\nID (hex)\tNAME\n", type); + + for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("%08x\t%s\n", p->nr, p->name); + + early_print("\nPlease check your kernel config and/or bootloader.\n"); + + while (true) + /* can't use cpu_relax() here as it may require MMU setup */; +} static void __init feat_v6_fixup(void) { @@ -703,7 +740,7 @@ static struct init_tags { { tag_size(tag_core), ATAG_CORE }, { 1, PAGE_SIZE, 0xff }, { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE, PHYS_OFFSET }, + { MEM_SIZE }, { 0, ATAG_NONE } }; @@ -802,6 +839,8 @@ void __init setup_arch(char **cmdline_p) struct machine_desc *mdesc; char *from = default_command_line; + init_tags.mem.start = PHYS_OFFSET; + unwind_init(); setup_processor(); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 907d5a620bc..abaf8445ce2 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -474,7 +474,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, unsigned long handler = (unsigned long)ka->sa.sa_handler; unsigned long retcode; int thumb = 0; - unsigned long cpsr = regs->ARM_cpsr & ~PSR_f; + unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + + cpsr |= PSR_ENDSTATE; /* * Maybe we need to deliver a 32-bit signal to a 26-bit task. diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fd9156698ab..60636f499cb 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -36,6 +36,7 @@ static void twd_set_mode(enum clock_event_mode mode, /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; + __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ @@ -81,7 +82,7 @@ int twd_timer_ack(void) static void __cpuinit twd_calibrate_rate(void) { - unsigned long load, count; + unsigned long count; u64 waitjiffies; /* @@ -116,10 +117,6 @@ static void __cpuinit twd_calibrate_rate(void) printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, (twd_timer_rate / 1000000) % 100); } - - load = twd_timer_rate / HZ; - - __raw_writel(load, twd_base + TWD_TIMER_LOAD); } /* diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 26685c2f7a4..f5cf660eefc 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -15,7 +15,7 @@ #include <linux/string.h> /* memcpy */ #include <asm/cputype.h> #include <asm/mach/map.h> -#include <mach/memory.h> +#include <asm/memory.h> #include "tcm.h" static struct gen_pool *tcm_pool; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f203..dfbb377e251 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,6 +21,12 @@ #define ARM_CPU_KEEP(x) #endif +#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#define ARM_EXIT_KEEP(x) x +#else +#define ARM_EXIT_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -43,6 +49,7 @@ SECTIONS _sinittext = .; HEAD_TEXT INIT_TEXT + ARM_EXIT_KEEP(EXIT_TEXT) _einittext = .; ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; @@ -57,6 +64,10 @@ SECTIONS __smpalt_end = .; #endif + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + INIT_SETUP(16) INIT_CALLS @@ -67,6 +78,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) #endif } @@ -162,6 +174,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) . = ALIGN(PAGE_SIZE); __init_end = .; #endif @@ -247,6 +260,8 @@ SECTIONS } #endif + NOTES + BSS_SECTION(0, 0, 0) _end = .; diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h index 4f93c567a35..4a10bf0bd36 100644 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -12,6 +12,6 @@ #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0xf0000000) +#define PLAT_PHYS_OFFSET UL(0xf0000000) #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index 14f4ef4b6a9..c2cfe504064 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,6 @@ #include <mach/hardware.h> -#define PHYS_OFFSET (AT91_SDRAM_BASE) +#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) #endif diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 447eb340c61..8bf3564fba5 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -31,7 +31,7 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_START PHYS_OFFSET +#define RAM_START PLAT_PHYS_OFFSET #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h index 114f942bb4f..15162e4c75f 100644 --- a/arch/arm/mach-bcmring/include/mach/memory.h +++ b/arch/arm/mach-bcmring/include/mach/memory.h @@ -23,7 +23,7 @@ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. */ -#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE +#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE /* * Maximum DMA memory allowed is 14M diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index f45c8e892cb..3a032a67725 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -23,7 +23,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h index 3b6b769b7a2..dc16c5c5d86 100644 --- a/arch/arm/mach-cns3xxx/include/mach/memory.h +++ b/arch/arm/mach-cns3xxx/include/mach/memory.h @@ -13,7 +13,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define __phys_to_bus(x) ((x) + PHYS_OFFSET) #define __bus_to_phys(x) ((x) - PHYS_OFFSET) diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 22eb97c1c30..78822723f38 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -26,9 +26,9 @@ #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) #error Cannot enable DaVinci and DA8XX platforms concurrently #elif defined(CONFIG_ARCH_DAVINCI_DA8XX) -#define PHYS_OFFSET DA8XX_DDR_BASE +#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE #else -#define PHYS_OFFSET DAVINCI_DDR_BASE +#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE #endif #define DDR2_SDRCR_OFFSET 0xc diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h index d6687207494..bbc93fee6c7 100644 --- a/arch/arm/mach-dove/include/mach/memory.h +++ b/arch/arm/mach-dove/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h index 0ca66d080c6..8e49066ad85 100644 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ b/arch/arm/mach-ebsa110/include/mach/memory.h @@ -19,7 +19,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) /* * Cache flushing area - SRAM diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ffdf87be295..82079545adc 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release); static struct resource ep93xx_ac97_resources[] = { { .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index f3dc76fdcea..bec34b83495 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -427,6 +427,13 @@ void __init ep93xx_gpio_init(void) { int i; + /* Set Ports C, D, E, G, and H for GPIO use */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) gpiochip_add(&ep93xx_gpio_banks[i].chip); } diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 554064e9030..c9400cf0051 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -6,15 +6,15 @@ #define __ASM_ARCH_MEMORY_H #if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xd0000000) +#define PLAT_PHYS_OFFSET UL(0xd0000000) #elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xe0000000) +#define PLAT_PHYS_OFFSET UL(0xe0000000) #elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xf0000000) +#define PLAT_PHYS_OFFSET UL(0xf0000000) #else #error "Kconfig bug: No EP93xx PHYS_OFFSET set" #endif diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 3c9e0c40c67..30b971d6581 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,8 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv mov \rp, #0x000003f8 - orr \rv, \rp, #0x7c000000 @ physical - orr \rp, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xff000000 @ virtual + orr \rp, \rp, #0x7c000000 @ physical .endm #define UART_SHIFT 0 diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 8d64f457408..5c6df377f96 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -62,7 +62,7 @@ extern unsigned long __bus_to_pfn(unsigned long); /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define FLUSH_BASE_PHYS 0x50000000 diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h index 2d14d5bf1f9..a50915f764d 100644 --- a/arch/arm/mach-gemini/include/mach/memory.h +++ b/arch/arm/mach-gemini/include/mach/memory.h @@ -11,9 +11,9 @@ #define __MACH_MEMORY_H #ifdef CONFIG_GEMINI_MEM_SWAP -# define PHYS_OFFSET UL(0x00000000) +# define PLAT_PHYS_OFFSET UL(0x00000000) #else -# define PHYS_OFFSET UL(0x10000000) +# define PLAT_PHYS_OFFSET UL(0x10000000) #endif #endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h index ef4c1e26f18..9d368765146 100644 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ b/arch/arm/mach-h720x/include/mach/memory.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) /* * This is the maximum DMA address that can be DMAd to. * There should not be more than (0xd0000000 - 0xc0000000) diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..8382e790207 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 991f24d2c11..334d5e27188 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -23,7 +23,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 3ad45531886..1afa99ef97f 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -6,7 +6,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h index c30f6450ad5..169cc239f76 100644 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ b/arch/arm/mach-iop32x/include/mach/memory.h @@ -8,6 +8,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xa0000000) +#define PLAT_PHYS_OFFSET UL(0xa0000000) #endif diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h index a30a96aa6d2..8e1daf7006b 100644 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ b/arch/arm/mach-iop33x/include/mach/memory.h @@ -8,6 +8,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h index 98e3471be15..5f0c4fd4076 100644 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ b/arch/arm/mach-ixp2000/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #include <mach/ixp2000-regs.h> diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 6ef65d813f1..6cf0704e946 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -17,7 +17,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET (0x00000000) +#define PLAT_PHYS_OFFSET (0x00000000) #define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4dc68d6bb6b..9fd894271d5 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long ixp4xx_timer_freq = FREQ; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { @@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = { static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, + clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, clockevent_ixp4xx.shift); clockevent_ixp4xx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index 0136eaa2922..6d388c9d0e2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 2c3f93c3eb7..c9e930f2933 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,7 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666000 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +#define IXP4XX_TIMER_FREQ 66666000 +#define CLOCK_TICK_RATE \ + (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfdbe4b5a3c..852f7c9f87d 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue) qmgr_queue_descs[queue], queue); qmgr_queue_descs[queue][0] = '\x0'; #endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); } static int qmgr_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h index 45431e13146..4600b44e3ad 100644 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ b/arch/arm/mach-kirkwood/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index bace9a681ad..f7e1b9bce34 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -18,7 +18,7 @@ /* * Physical SRAM offset. */ -#define PHYS_OFFSET KS8695_SDRAM_PA +#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h index edb8f5faf5d..f77bde80fe4 100644 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ b/arch/arm/mach-lh7a40x/include/mach/memory.h @@ -17,7 +17,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) /* * Sparsemem version of the above diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h index 2ed7e6e732c..66366657a87 100644 --- a/arch/arm/mach-loki/include/mach/memory.h +++ b/arch/arm/mach-loki/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h index 044e1acecbe..a647dd624af 100644 --- a/arch/arm/mach-lpc32xx/include/mach/memory.h +++ b/arch/arm/mach-lpc32xx/include/mach/memory.h @@ -22,6 +22,6 @@ /* * Physical DRAM offset of bank 0 */ -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h index bdb21d70714..d68b50a2d6a 100644 --- a/arch/arm/mach-mmp/include/mach/memory.h +++ b/arch/arm/mach-mmp/include/mach/memory.h @@ -9,6 +9,6 @@ #ifndef __ASM_MACH_MEMORY_H #define __ASM_MACH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index e7a76eff57d..08fcd40a8cb 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -132,7 +132,7 @@ static void __init msm7x2x_map_io(void) MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -142,7 +142,7 @@ MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -152,7 +152,7 @@ MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -162,7 +162,7 @@ MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 6f3b9735e97..25db8fd71a7 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -26,11 +26,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/memory.h> #include <asm/setup.h> #include <mach/gpio.h> #include <mach/board.h> -#include <mach/memory.h> #include <mach/msm_iomap.h> #include <mach/dma.h> @@ -85,7 +85,7 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -95,7 +95,7 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -105,7 +105,7 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6dde8185205..15c2bbd2ef8 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -118,7 +118,7 @@ static void __init qsd8x50_init(void) MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, @@ -128,7 +128,7 @@ MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 8919ffb1719..83604f526f0 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -107,7 +107,7 @@ MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland <swetland@google.com> */ #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, .init_irq = sapphire_init_irq, diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index 070e17d237f..176875df241 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -18,15 +18,15 @@ /* physical offset of RAM */ #if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_ARCH_QSD8X50) -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #elif defined(CONFIG_ARCH_MSM7X30) -#define PHYS_OFFSET UL(0x00200000) +#define PLAT_PHYS_OFFSET UL(0x00200000) #elif defined(CONFIG_ARCH_MSM8X60) -#define PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40200000) #else -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #endif #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h index e663042d307..a648c51f2e4 100644 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ b/arch/arm/mach-mv78xx0/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index a5f3eb24e4d..df1a6ce8e3e 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -27,6 +27,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> +#include <asm/memory.h> #include <asm/setup.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -36,7 +37,6 @@ #include <mach/clock.h> #include <mach/common.h> #include <mach/iomux-mx3.h> -#include <mach/memory.h> #include "devices-imx31.h" #include "devices.h" diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 0a19e7567c0..d8a65daa8be 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -464,7 +464,14 @@ static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent) return 0; } +#ifdef CONFIG_CLK_DEBUG +#define __INIT_CLK_DEBUG(n) .name = #n, +#else +#define __INIT_CLK_DEBUG(n) +#endif + static struct clk main_bus_clk = { + __INIT_CLK_DEBUG(main_bus_clk) .parent = &pll2_sw_clk, .set_parent = _clk_main_bus_set_parent, }; @@ -728,23 +735,28 @@ static unsigned long _clk_ddr_hf_get_rate(struct clk *clk) /* External high frequency clock */ static struct clk ckih_clk = { + __INIT_CLK_DEBUG(ckih_clk) .get_rate = get_high_reference_clock_rate, }; static struct clk ckih2_clk = { + __INIT_CLK_DEBUG(ckih2_clk) .get_rate = get_ckih2_reference_clock_rate, }; static struct clk osc_clk = { + __INIT_CLK_DEBUG(osc_clk) .get_rate = get_oscillator_reference_clock_rate, }; /* External low frequency (32kHz) clock */ static struct clk ckil_clk = { + __INIT_CLK_DEBUG(ckil_clk) .get_rate = get_low_reference_clock_rate, }; static struct clk pll1_main_clk = { + __INIT_CLK_DEBUG(pll1_main_clk) .parent = &osc_clk, .get_rate = clk_pll_get_rate, .enable = _clk_pll_enable, @@ -762,6 +774,7 @@ static struct clk pll1_main_clk = { /* PLL1 SW supplies to ARM core */ static struct clk pll1_sw_clk = { + __INIT_CLK_DEBUG(pll1_sw_clk) .parent = &pll1_main_clk, .set_parent = _clk_pll1_sw_set_parent, .get_rate = clk_pll1_sw_get_rate, @@ -769,6 +782,7 @@ static struct clk pll1_sw_clk = { /* PLL2 SW supplies to AXI/AHB/IP buses */ static struct clk pll2_sw_clk = { + __INIT_CLK_DEBUG(pll2_sw_clk) .parent = &osc_clk, .get_rate = clk_pll_get_rate, .set_rate = _clk_pll_set_rate, @@ -779,6 +793,7 @@ static struct clk pll2_sw_clk = { /* PLL3 SW supplies to serial clocks like USB, SSI, etc. */ static struct clk pll3_sw_clk = { + __INIT_CLK_DEBUG(pll3_sw_clk) .parent = &osc_clk, .set_rate = _clk_pll_set_rate, .get_rate = clk_pll_get_rate, @@ -788,6 +803,7 @@ static struct clk pll3_sw_clk = { /* PLL4 SW supplies to LVDS Display Bridge(LDB) */ static struct clk mx53_pll4_sw_clk = { + __INIT_CLK_DEBUG(mx53_pll4_clk) .parent = &osc_clk, .set_rate = _clk_pll_set_rate, .enable = _clk_pll_enable, @@ -796,22 +812,26 @@ static struct clk mx53_pll4_sw_clk = { /* Low-power Audio Playback Mode clock */ static struct clk lp_apm_clk = { + __INIT_CLK_DEBUG(lp_apm_clk) .parent = &osc_clk, .set_parent = _clk_lp_apm_set_parent, }; static struct clk periph_apm_clk = { + __INIT_CLK_DEBUG(periph_apm_clk) .parent = &pll1_sw_clk, .set_parent = _clk_periph_apm_set_parent, }; static struct clk cpu_clk = { + __INIT_CLK_DEBUG(cpu_clk) .parent = &pll1_sw_clk, .get_rate = clk_cpu_get_rate, .set_rate = clk_cpu_set_rate, }; static struct clk ahb_clk = { + __INIT_CLK_DEBUG(ahb_clk) .parent = &main_bus_clk, .get_rate = clk_ahb_get_rate, .set_rate = _clk_ahb_set_rate, @@ -819,6 +839,7 @@ static struct clk ahb_clk = { }; static struct clk iim_clk = { + __INIT_CLK_DEBUG(iim_clk) .parent = &ipg_clk, .enable_reg = MXC_CCM_CCGR0, .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET, @@ -826,17 +847,20 @@ static struct clk iim_clk = { /* Main IP interface clock for access to registers */ static struct clk ipg_clk = { + __INIT_CLK_DEBUG(ipg_clk) .parent = &ahb_clk, .get_rate = clk_ipg_get_rate, }; static struct clk ipg_perclk = { + __INIT_CLK_DEBUG(ipg_clk) .parent = &lp_apm_clk, .get_rate = clk_ipg_per_get_rate, .set_parent = _clk_ipg_per_set_parent, }; static struct clk ahb_max_clk = { + __INIT_CLK_DEBUG(ahb_max_clk) .parent = &ahb_clk, .enable_reg = MXC_CCM_CCGR0, .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET, @@ -845,6 +869,7 @@ static struct clk ahb_max_clk = { }; static struct clk aips_tz1_clk = { + __INIT_CLK_DEBUG(aips_tz1_clk) .parent = &ahb_clk, .secondary = &ahb_max_clk, .enable_reg = MXC_CCM_CCGR0, @@ -854,6 +879,7 @@ static struct clk aips_tz1_clk = { }; static struct clk aips_tz2_clk = { + __INIT_CLK_DEBUG(aips_tz2_clk) .parent = &ahb_clk, .secondary = &ahb_max_clk, .enable_reg = MXC_CCM_CCGR0, @@ -863,11 +889,13 @@ static struct clk aips_tz2_clk = { }; static struct clk gpt_32k_clk = { + __INIT_CLK_DEBUG(gpt_32k_clk) .id = 0, .parent = &ckil_clk, }; static struct clk kpp_clk = { + __INIT_CLK_DEBUG(kpp_clk) .id = 0, }; @@ -876,6 +904,7 @@ static struct clk dummy_clk = { }; static struct clk emi_slow_clk = { + __INIT_CLK_DEBUG(emi_slow_clk) .parent = &pll2_sw_clk, .enable_reg = MXC_CCM_CCGR5, .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, @@ -989,6 +1018,7 @@ static struct clk mipi_hsp_clk = { #define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \ static struct clk name = { \ + __INIT_CLK_DEBUG(name) \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ @@ -1004,6 +1034,7 @@ static struct clk mipi_hsp_clk = { #define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \ static struct clk name = { \ + __INIT_CLK_DEBUG(name) \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ @@ -1082,6 +1113,7 @@ CLK_GET_RATE(uart, 1, UART) CLK_SET_PARENT(uart, 1, UART) static struct clk uart_root_clk = { + __INIT_CLK_DEBUG(uart_root_clk) .parent = &pll2_sw_clk, .get_rate = clk_uart_get_rate, .set_parent = clk_uart_set_parent, @@ -1092,6 +1124,7 @@ CLK_GET_RATE(usboh3, 1, USBOH3) CLK_SET_PARENT(usboh3, 1, USBOH3) static struct clk usboh3_clk = { + __INIT_CLK_DEBUG(usboh3_clk) .parent = &pll2_sw_clk, .get_rate = clk_usboh3_get_rate, .set_parent = clk_usboh3_set_parent, @@ -1137,6 +1170,7 @@ CLK_GET_RATE(ecspi, 2, CSPI) CLK_SET_PARENT(ecspi, 1, CSPI) static struct clk ecspi_main_clk = { + __INIT_CLK_DEBUG(ecspi_main_clk) .parent = &pll3_sw_clk, .get_rate = clk_ecspi_get_rate, .set_parent = clk_ecspi_set_parent, @@ -1152,7 +1186,8 @@ CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2) CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2) #define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ - static struct clk name = { \ +static struct clk name = { \ + __INIT_CLK_DEBUG(name) \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ @@ -1372,8 +1407,10 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, ckih2_reference = ckih2; oscillator_reference = osc; - for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++) + for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++) { clkdev_add(&mx51_lookups[i]); + clk_debug_register(mx51_lookups[i].clk); + } clk_tree_init(); diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfde..ca72a05ed9c 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..fd1c4c54b8e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70..a7093c88e6a 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..cb0c0e83a52 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a3..592c9ab5d76 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h index 9a363f297f9..59561496c36 100644 --- a/arch/arm/mach-netx/include/mach/memory.h +++ b/arch/arm/mach-netx/include/mach/memory.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h index 1e5689d98ec..d3325211ba6 100644 --- a/arch/arm/mach-nomadik/include/mach/memory.h +++ b/arch/arm/mach-nomadik/include/mach/memory.h @@ -23,6 +23,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h index 6107193adbf..5c65aee6e7a 100644 --- a/arch/arm/mach-ns9xxx/include/mach/memory.h +++ b/arch/arm/mach-ns9xxx/include/mach/memory.h @@ -19,6 +19,6 @@ #define NS9XXX_CS2STAT_LENGTH UL(0x1000) #define NS9XXX_CS3STAT_LENGTH UL(0x1000) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h index 323ab0db3f7..ef9864b002a 100644 --- a/arch/arm/mach-nuc93x/include/mach/memory.h +++ b/arch/arm/mach-nuc93x/include/mach/memory.h @@ -16,6 +16,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 8d2f2daba0c..e0a028161dd 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -9,6 +9,7 @@ config ARCH_OMAP730 depends on ARCH_OMAP1 bool "OMAP730 Based System" select CPU_ARM926T + select OMAP_MPU_TIMER select ARCH_OMAP_OTG config ARCH_OMAP850 @@ -22,6 +23,7 @@ config ARCH_OMAP15XX default y bool "OMAP15xx Based System" select CPU_ARM925T + select OMAP_MPU_TIMER config ARCH_OMAP16XX depends on ARCH_OMAP1 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 6ee19504845..ba6009f2767 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,12 +3,11 @@ # # Common support -obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o -obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 6a0fa046236..62856044eb6 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -17,6 +17,9 @@ #include <plat/serial.h> +#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -33,7 +36,7 @@ omap_uart_virt: .word 0x0 /* Use omap_uart_phys/virt if already configured */ 9: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rp, =omap_uart_phys @ MMU enabled add \rv, \rp, #4 @ omap_uart_virt ldr \rp, [\rp, #0] @@ -46,7 +49,7 @@ omap_uart_virt: .word 0x0 mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ @@ -73,7 +76,7 @@ omap_uart_virt: .word 0x0 98: add \rp, \rp, #0xff000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] sub \rp, \rp, #0xff000000 @ phys base diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index c9be6d4d83e..bfb4fb1d738 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -14,19 +14,6 @@ #include <mach/irqs.h> #include <asm/hardware/gic.h> -/* - * We use __glue to avoid errors with multiple definitions of - * .globl omap_irq_flags as it's included from entry-armv.S but not - * from entry-common.S. - */ -#ifdef __glue - .pushsection .data - .globl omap_irq_flags -omap_irq_flags: - .word 0 - .popsection -#endif - .macro disable_fiq .endm diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 47701584df3..731dd33bff5 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -57,6 +57,7 @@ struct omap_irq_bank { unsigned long wake_enable; }; +u32 omap_irq_flags; static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; @@ -176,7 +177,6 @@ static struct irq_chip omap_irq_chip = { void __init omap_init_irq(void) { - extern unsigned int omap_irq_flags; int i, j; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da0..453809359ba 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index ed7a61ff916..6885d2fac18 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -49,11 +49,15 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/irq.h> +#include <asm/sched_clock.h> + #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <plat/common.h> +#ifdef CONFIG_OMAP_MPU_TIMER + #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 @@ -67,7 +71,7 @@ typedef struct { ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ (n)*OMAP_MPU_TIMER_OFFSET)) -static inline unsigned long omap_mpu_timer_read(int nr) +static inline unsigned long notrace omap_mpu_timer_read(int nr) { volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); return timer->read_tim; @@ -212,6 +216,32 @@ static struct clocksource clocksource_mpu = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static DEFINE_CLOCK_DATA(cd); + +static inline unsigned long long notrace _omap_mpu_sched_clock(void) +{ + u32 cyc = mpu_read(&clocksource_mpu); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +#ifndef CONFIG_OMAP_32K_TIMER +unsigned long long notrace sched_clock(void) +{ + return _omap_mpu_sched_clock(); +} +#else +static unsigned long long notrace omap_mpu_sched_clock(void) +{ + return _omap_mpu_sched_clock(); +} +#endif + +static void notrace mpu_update_sched_clock(void) +{ + u32 cyc = mpu_read(&clocksource_mpu); + update_sched_clock(&cd, cyc, (u32)~0); +} + static void __init omap_init_clocksource(unsigned long rate) { static char err[] __initdata = KERN_ERR @@ -219,17 +249,13 @@ static void __init omap_init_clocksource(unsigned long rate) setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); omap_mpu_timer_start(1, ~0, 1); + init_sched_clock(&cd, mpu_update_sched_clock, 32, rate); if (clocksource_register_hz(&clocksource_mpu, rate)) printk(err, clocksource_mpu.name); } -/* - * --------------------------------------------------------------------------- - * Timer initialization - * --------------------------------------------------------------------------- - */ -static void __init omap_timer_init(void) +static void __init omap_mpu_timer_init(void) { struct clk *ck_ref = clk_get(NULL, "ck_ref"); unsigned long rate; @@ -246,6 +272,66 @@ static void __init omap_timer_init(void) omap_init_clocksource(rate); } +#else +static inline void omap_mpu_timer_init(void) +{ + pr_err("Bogus timer, should not happen\n"); +} +#endif /* CONFIG_OMAP_MPU_TIMER */ + +#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER) +static unsigned long long (*preferred_sched_clock)(void); + +unsigned long long notrace sched_clock(void) +{ + if (!preferred_sched_clock) + return 0; + + return preferred_sched_clock(); +} + +static inline void preferred_sched_clock_init(bool use_32k_sched_clock) +{ + if (use_32k_sched_clock) + preferred_sched_clock = omap_32k_sched_clock; + else + preferred_sched_clock = omap_mpu_sched_clock; +} +#else +static inline void preferred_sched_clock_init(bool use_32k_sched_clcok) +{ +} +#endif + +static inline int omap_32k_timer_usable(void) +{ + int res = false; + + if (cpu_is_omap730() || cpu_is_omap15xx()) + return res; + +#ifdef CONFIG_OMAP_32K_TIMER + res = omap_32k_timer_init(); +#endif + + return res; +} + +/* + * --------------------------------------------------------------------------- + * Timer initialization + * --------------------------------------------------------------------------- + */ +static void __init omap_timer_init(void) +{ + if (omap_32k_timer_usable()) { + preferred_sched_clock_init(1); + } else { + omap_mpu_timer_init(); + preferred_sched_clock_init(0); + } +} + struct sys_timer omap_timer = { .init = omap_timer_init, }; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 20cfbcc6c60..13d7b8f145b 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,10 +52,9 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <plat/common.h> #include <plat/dmtimer.h> -struct sys_timer omap_timer; - /* * --------------------------------------------------------------------------- * 32KHz OS timer @@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap_timer_init(void) +bool __init omap_32k_timer_init(void) { + omap_init_clocksource_32k(); + #ifdef CONFIG_OMAP_DM_TIMER omap_dm_timer_init(); #endif omap_init_32k_timer(); -} -struct sys_timer omap_timer = { - .init = omap_timer_init, -}; + return true; +} diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b02d87..f6614a6898a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -61,7 +61,7 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \ - cpuidle34xx.o pm_bus.o + cpuidle34xx.o pm_bus.o dvfs.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o @@ -242,3 +242,6 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) + +disp-$(CONFIG_OMAP2_DSS) := display.o +obj-y += $(disp-m) $(disp-y) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d4e41ef86aa..33ff4f6ba12 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -307,22 +307,8 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct platform_device sdp3430_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &sdp3430_dss_data, - }, -}; - -static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &sdp3430_dss_device.dev, -}; - -static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_dss_device, -}; +static struct regulator_consumer_supply sdp3430_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; @@ -546,10 +532,8 @@ static struct regulator_init_data sdp3430_vdac = { /* VPLL2 for digital video outputs */ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - { - .supply = "vdds_dsi", - .dev = &sdp3430_dss_device.dev, - } + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), }; static struct regulator_init_data sdp3430_vpll2 = { @@ -801,7 +785,7 @@ static void __init omap_3430sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); - platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); + omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; else diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7743c..548f5245eda 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -378,24 +378,12 @@ static struct omap_dss_board_info am3517_evm_dss_data = { .default_device = &am3517_evm_lcd_device, }; -static struct platform_device am3517_evm_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &am3517_evm_dss_data, - }, -}; - /* * Board initialization */ static struct omap_board_config_kernel am3517_evm_config[] __initdata = { }; -static struct platform_device *am3517_evm_devices[] __initdata = { - &am3517_evm_dss_device, -}; - static void __init am3517_evm_init_irq(void) { omap_board_config = am3517_evm_config; @@ -495,9 +483,7 @@ static void __init am3517_evm_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); - platform_add_devices(am3517_evm_devices, - ARRAY_SIZE(am3517_evm_devices)); - + omap_display_init(&am3517_evm_dss_data); omap_serial_init(); /* Configure GPIO for EHCI port */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac14161066..2e9265ef3f9 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -401,14 +401,6 @@ static struct omap_dss_board_info cm_t35_dss_data = { .default_device = &cm_t35_dvi_device, }; -static struct platform_device cm_t35_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &cm_t35_dss_data, - }, -}; - static struct omap2_mcspi_device_config tdo24m_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ @@ -468,7 +460,7 @@ static void __init cm_t35_init_display(void) msleep(50); gpio_set_value(lcd_en_gpio, 1); - err = platform_device_register(&cm_t35_dss_device); + err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); goto err_dev_reg; @@ -495,15 +487,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { .supply = "vmmc_aux", }; -static struct regulator_consumer_supply cm_t35_vdac_supply = { - .supply = "vdda_dac", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdac_supply = + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); -static struct regulator_consumer_supply cm_t35_vdvi_supply = { - .supply = "vdvi", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdvi_supply = + REGULATOR_SUPPLY("vdvi", "omap_display"); /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5b0c77732df..8f9a64d650e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {} #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (160) +#define RTC_RD_GPIO (53) #define RTC_CS_GPIO (163) +#define RTC_CS_EN_GPIO (160) struct v3020_platform_data cm_t3517_v3020_pdata = { .use_gpio = 1, @@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = { static void __init cm_t3517_init_rtc(void) { + int err; + + err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + if (err) { + pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); + return; + } + + gpio_direction_output(RTC_CS_EN_GPIO, 1); + platform_device_register(&cm_t3517_rtc_device); } #else @@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ .size = MTDPART_SIZ_FULL, }, }; @@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* RTC GPIOs: IO, WR#, RD#, CS# */ + + /* RTC GPIOs: */ + /* IO - GPIO153 */ OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* WR# - GPIO154 */ OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* RD# - GPIO53 */ + OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS# - GPIO163 */ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS EN - GPIO160 */ + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* HSUSB2 RESET */ diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 00bb1fc5e01..d277143c425 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -198,16 +195,8 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct platform_device devkit8000_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &devkit8000_dss_data, - }, -}; - static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), @@ -247,6 +236,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +246,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } @@ -275,14 +272,15 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; -static struct regulator_consumer_supply devkit8000_vpll1_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data devkit8000_vmmc1 = { @@ -323,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vpll1_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), + .consumer_supplies = devkit8000_vpll1_supplies, }; /* VAUX4 for ads7846 and nubs */ @@ -571,7 +569,6 @@ static void __init omap_dm9000_init(void) } static struct platform_device *devkit8000_devices[] __initdata = { - &devkit8000_dss_device, &leds_gpio, &keys_gpio, &omap_dm9000_dev, @@ -793,6 +790,7 @@ static void __init devkit8000_init(void) platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); + omap_display_init(&devkit8000_dss_data); spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3be85a1f55f..dfbe3a1eaa8 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -485,17 +485,9 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct platform_device igep2_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &igep2_dss_data, - }, -}; - -static struct regulator_consumer_supply igep2_vpll2_supply = { - .supply = "vdds_dsi", - .dev = &igep2_dss_device.dev, +static struct regulator_consumer_supply igep2_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), }; static struct regulator_init_data igep2_vpll2 = { @@ -509,8 +501,8 @@ static struct regulator_init_data igep2_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), + .consumer_supplies = igep2_vpll2_supplies, }; static void __init igep2_display_init(void) @@ -521,7 +513,6 @@ static void __init igep2_display_init(void) } static struct platform_device *igep2_devices[] __initdata = { - &igep2_dss_device, &igep2_vwlan_device, }; @@ -697,6 +688,7 @@ static void __init igep2_init(void) /* Register I2C busses and drivers */ igep2_i2c_init(); platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); + omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814ab565..caf6c8aedac 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -228,19 +228,13 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct platform_device beagle_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &beagle_dss_data, - }, -}; - static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); -static struct regulator_consumer_supply beagle_vdvi_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply beagle_vdvi_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), +}; static void __init beagle_display_init(void) { @@ -427,8 +421,8 @@ static struct regulator_init_data beagle_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), + .consumer_supplies = beagle_vdvi_supplies, }; static struct twl4030_usb_data beagle_usb_data = { @@ -550,7 +544,6 @@ static void __init omap3_beagle_init_irq(void) static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, - &beagle_dss_device, }; static void __init omap3beagle_flash_init(void) @@ -617,6 +610,7 @@ static void __init omap3_beagle_init(void) omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + omap_display_init(&beagle_dss_data); omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 323c3809ce3..0c56b9edf65 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -328,14 +328,6 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct platform_device omap3_evm_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &omap3_evm_dss_data, - }, -}; - static struct regulator_consumer_supply omap3evm_vmmc1_supply = { .supply = "vmmc", }; @@ -500,10 +492,8 @@ static struct twl4030_codec_data omap3evm_codec_data = { .audio = &omap3evm_audio_data, }; -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &omap3_evm_dss_device.dev, -}; +static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { @@ -521,8 +511,10 @@ static struct regulator_init_data omap3_evm_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), +}; static struct regulator_init_data omap3_evm_vpll2 = { .constraints = { @@ -534,8 +526,8 @@ static struct regulator_init_data omap3_evm_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), + .consumer_supplies = omap3_evm_vpll2_supplies, }; static struct twl4030_platform_data omap3evm_twldata = { @@ -634,10 +626,6 @@ static void __init omap3_evm_init_irq(void) omap_init_irq(); } -static struct platform_device *omap3_evm_devices[] __initdata = { - &omap3_evm_dss_device, -}; - static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, @@ -675,7 +663,7 @@ static void __init omap3_evm_init(void) omap3_evm_i2c_init(); - platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); + omap_display_init(&omap3_evm_dss_data); spi_register_board_info(omap3evm_spi_board_info, ARRAY_SIZE(omap3evm_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 0b34beded11..b430d2bce8f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -253,14 +253,6 @@ static struct omap_dss_board_info pandora_dss_data = { .default_device = &pandora_lcd_device, }; -static struct platform_device pandora_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &pandora_dss_data, - }, -}; - static void pandora_wl1251_init_card(struct mmc_card *card) { /* @@ -350,11 +342,12 @@ static struct regulator_consumer_supply pandora_vmmc3_supply = REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2"); static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); static struct regulator_consumer_supply pandora_vdds_supplies[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), }; static struct regulator_consumer_supply pandora_vcc_lcd_supply = @@ -677,7 +670,6 @@ fail: static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, - &pandora_dss_device, &pandora_vwlan_device, }; @@ -712,6 +704,7 @@ static void __init omap3pandora_init(void) pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); + omap_display_init(&pandora_dss_data); omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad447e8..b5e868044c1 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -240,14 +240,6 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct platform_device omap3_stalker_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &omap3_stalker_dss_data, - }, -}; - static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { .supply = "vmmc", }; @@ -448,10 +440,8 @@ static struct twl4030_codec_data omap3stalker_codec_data = { .audio = &omap3stalker_audio_data, }; -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &omap3_stalker_dss_device.dev, -}; +static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -469,9 +459,9 @@ static struct regulator_init_data omap3_stalker_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supply = { - .supply = "vdds_dsi", - .dev = &omap3_stalker_lcd_device.dev, +static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), }; static struct regulator_init_data omap3_stalker_vpll2 = { @@ -485,8 +475,8 @@ static struct regulator_init_data omap3_stalker_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), + .consumer_supplies = omap3_stalker_vpll2_supplies, }; static struct twl4030_platform_data omap3stalker_twldata = { @@ -604,7 +594,6 @@ static void __init omap3_stalker_init_irq(void) } static struct platform_device *omap3_stalker_devices[] __initdata = { - &omap3_stalker_dss_device, &keys_gpio, }; @@ -644,6 +633,7 @@ static void __init omap3_stalker_init(void) platform_add_devices(omap3_stalker_devices, ARRAY_SIZE(omap3_stalker_devices)); + omap_display_init(&omap3_stalker_dss_data); spi_register_board_info(omap3stalker_spi_board_info, ARRAY_SIZE(omap3stalker_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0..b09d23925f4 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -37,6 +37,7 @@ #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> +#include <plat/panel-generic-dpi.h> #include "timer-gp.h" #include "hsmmc.h" @@ -76,6 +77,60 @@ static struct platform_device *panda_devices[] __initdata = { &leds_gpio, }; +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +static int panda_enable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 1); + return 0; +} + +static void panda_disable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 0); +} + +/* Using generic display panel */ +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = panda_enable_dvi, + .platform_disable = panda_disable_dvi, +}; + +struct omap_dss_device panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +int __init panda_dvi_init(void) +{ + int r; + + /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ + r = gpio_request_one(panda_dvi_device.reset_gpio, + GPIOF_OUT_INIT_LOW, "DVI PD"); + if (r) + pr_err("Failed to get DVI powerdown GPIO\n"); + + return r; +} + +static struct omap_dss_device *panda_dss_devices[] = { + &panda_dvi_device, +}; + +static struct omap_dss_board_info panda_dss_data = { + .num_devices = ARRAY_SIZE(panda_dss_devices), + .devices = panda_dss_devices, + .default_device = &panda_dvi_device, +}; + static void __init omap4_panda_init_irq(void) { omap2_init_common_infrastructure(); @@ -375,6 +430,17 @@ static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { .platform_data = &omap4_panda_twldata, }, }; + +/* + * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM + * is connected as I2C slave device, and can be accessed at address 0x50 + */ +static struct i2c_board_info __initdata panda_i2c_eeprom[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + static int __init omap4_panda_i2c_init(void) { /* @@ -384,13 +450,76 @@ static int __init omap4_panda_i2c_init(void) omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, ARRAY_SIZE(omap4_panda_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); + /* + * Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz + */ + omap_register_i2c_bus(3, 100, panda_i2c_eeprom, + ARRAY_SIZE(panda_i2c_eeprom)); omap_register_i2c_bus(4, 400, NULL, 0); return 0; } #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* gpio 0 - TFP410 PD */ + OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3), + /* dispc2_data23 */ + OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data22 */ + OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data21 */ + OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data20 */ + OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data19 */ + OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data18 */ + OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data15 */ + OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data14 */ + OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data13 */ + OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data12 */ + OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data11 */ + OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data10 */ + OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data9 */ + OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data16 */ + OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data17 */ + OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_hsync */ + OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_pclk */ + OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_vsync */ + OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_de */ + OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data8 */ + OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data7 */ + OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data6 */ + OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data5 */ + OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data4 */ + OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data3 */ + OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data2 */ + OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data1 */ + OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data0 */ + OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -400,6 +529,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int err; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; @@ -409,10 +539,13 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); + + /* Enabling DVI Display */ + err = panda_dvi_init(); + if (!err) + omap_display_init(&panda_dss_data); } static void __init omap4_panda_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index cb26e5d8268..90c256879ed 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -28,6 +28,7 @@ #include <linux/platform_device.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/spi/spi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -41,10 +42,14 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> +#include <plat/mcspi.h> +#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -68,8 +73,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <plat/mcspi.h> -#include <linux/spi/spi.h> #include <linux/spi/ads7846.h> static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -94,18 +97,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - } -}; - static void __init overo_ads7846_init(void) { if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && @@ -115,9 +106,6 @@ static void __init overo_ads7846_init(void) printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); return; } - - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); } #else @@ -233,6 +221,140 @@ static inline void __init overo_init_smsc911x(void) static inline void __init overo_init_smsc911x(void) { return; } #endif +/* DSS */ +static int lcd_enabled; +static int dvi_enabled; + +#define OVERO_GPIO_LCD_EN 144 +#define OVERO_GPIO_LCD_BL 145 + +static void __init overo_display_init(void) +{ + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_EN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_EN\n"); + + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_BL, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_BL\n"); +} + +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + dvi_enabled = 1; + + return 0; +} + +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = overo_panel_enable_dvi, + .platform_disable = overo_panel_disable_dvi, +}; + +static struct omap_dss_device overo_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = -EINVAL, +}; + +static struct omap_dss_device overo_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(OVERO_GPIO_LCD_EN, 1); + gpio_set_value(OVERO_GPIO_LCD_BL, 1); + lcd_enabled = 1; + return 0; +} + +static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(OVERO_GPIO_LCD_EN, 0); + gpio_set_value(OVERO_GPIO_LCD_BL, 0); + lcd_enabled = 0; +} + +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct omap_dss_device overo_lcd35_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd35", + .driver_name = "lgphilips_lb035q02_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ + defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) +static struct omap_dss_device overo_lcd43_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd43", + .driver_name = "samsung_lte_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +static struct omap_dss_device *overo_dss_devices[] = { + &overo_dvi_device, + &overo_tv_device, +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + &overo_lcd35_device, +#endif +#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ + defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) + &overo_lcd43_device, +#endif +}; + +static struct omap_dss_board_info overo_dss_data = { + .num_devices = ARRAY_SIZE(overo_dss_devices), + .devices = overo_dss_devices, + .default_device = &overo_dvi_device, +}; + +static struct regulator_consumer_supply overo_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); + +static struct regulator_consumer_supply overo_vdds_supplies[] = { + REGULATOR_SUPPLY("vdds_sdi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), +}; + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -358,6 +480,37 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data overo_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data overo_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(overo_vdds_supplies), + .consumer_supplies = &overo_vdds_supplies, +}; + +/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + static struct twl4030_codec_audio_data overo_audio_data = { .audio_mclk = 26000000, }; @@ -376,6 +529,8 @@ static struct twl4030_platform_data overo_twldata = { .usb = &overo_usb_data, .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, + .vdac = &overo_vdac, + .vpll2 = &overo_vpll2, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { @@ -396,33 +551,47 @@ static int __init overo_i2c_init(void) return 0; } -static struct platform_device overo_lcd_device = { - .name = "overo_lcd", - .id = -1, -}; - -static struct omap_lcd_config overo_lcd_config __initdata = { - .ctrl_name = "internal", +static struct spi_board_info overo_spi_board_info[] __initdata = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +#endif +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + { + .modalias = "lgphilips_lb035q02_panel-spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 500000, + .mode = SPI_MODE_3, + }, +#endif }; -static struct omap_board_config_kernel overo_config[] __initdata = { - { OMAP_TAG_LCD, &overo_lcd_config }, -}; +static int __init overo_spi_init(void) +{ + overo_ads7846_init(); + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + return 0; +} static void __init overo_init_irq(void) { - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); } -static struct platform_device *overo_devices[] __initdata = { - &overo_lcd_device, -}; - static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, @@ -450,13 +619,14 @@ static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); - platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_display_init(&overo_dss_data); omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); - overo_ads7846_init(); + overo_spi_init(); overo_init_smsc911x(); + overo_display_init(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44..39a71bb8a30 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e75e240cad6..b783854476b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -360,11 +360,11 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omap_display"), }; static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss"), + REGULATOR_SUPPLY("vdda_dac", "omap_venc"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index acd670054d9..89a66db8b77 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -66,18 +66,6 @@ static struct omap_dss_board_info rx51_dss_board_info = { .default_device = &rx51_lcd_device, }; -struct platform_device rx51_display_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &rx51_dss_board_info, - }, -}; - -static struct platform_device *rx51_video_devices[] __initdata = { - &rx51_display_device, -}; - static int __init rx51_video_init(void) { if (!machine_is_nokia_rx51()) @@ -95,8 +83,7 @@ static int __init rx51_video_init(void) gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - platform_add_devices(rx51_video_devices, - ARRAY_SIZE(rx51_video_devices)); + omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 6bcd43657ae..37b84c2b850 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -130,14 +130,6 @@ static struct omap_dss_board_info zoom_dss_data = { .default_device = &zoom_lcd_device, }; -static struct platform_device zoom_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &zoom_dss_data, - }, -}; - static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, .single_channel = 1, /* 0: slave, 1: master */ @@ -153,14 +145,9 @@ static struct spi_board_info nec_8048_spi_board_info[] __initdata = { }, }; -static struct platform_device *zoom_display_devices[] __initdata = { - &zoom_dss_device, -}; - void __init zoom_display_init(void) { - platform_add_devices(zoom_display_devices, - ARRAY_SIZE(zoom_display_devices)); + omap_display_init(&zoom_dss_data); spi_register_board_info(nec_8048_spi_board_info, ARRAY_SIZE(nec_8048_spi_board_info)); zoom_lcd_panel_init(); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index e0e040f34c6..780a99c4359 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -226,11 +226,13 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply zoom_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply zoom_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omap_display"), + REGULATOR_SUPPLY("vdds_dsi", "omap_dsi1"), +}; static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omap_venc"); static struct regulator_init_data zoom_vpll2 = { .constraints = { @@ -241,8 +243,8 @@ static struct regulator_init_data zoom_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), + .consumer_supplies = zoom_vpll2_supplies, }; static struct regulator_init_data zoom_vdac = { diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 0a992bc8d0d..3c1712b045a 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1786,10 +1786,10 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_242X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_242X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_242X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_242X), + CLK("omap_dss", "ick", &dss_ick, CK_242X), + CLK("omap_dss", "fck", &dss1_fck, CK_242X), + CLK("omap_dss", "sys_clk", &dss2_fck, CK_242X), + CLK("omap_dss", "tv_clk", &dss_54m_fck, CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index c047dcd007e..136171c92c6 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1890,10 +1890,10 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_243X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X), + CLK("omap_dss", "ick", &dss_ick, CK_243X), + CLK("omap_dss", "fck", &dss1_fck, CK_243X), + CLK("omap_dss", "sys_clk", &dss2_fck, CK_243X), + CLK("omap_dss", "tv_clk", &dss_54m_fck, CK_243X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 403a4a1d3f9..414de70c7a3 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3357,13 +3357,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omapdss", "tv_fck", &dss_tv_fck, CK_3XXX), - CLK("omapdss", "video_fck", &dss_96m_fck, CK_3XXX), - CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omap_dss", "fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omap_dss", "fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omap_dss", "tv_clk", &dss_tv_fck, CK_3XXX), + CLK("omap_dss", "video_clk", &dss_96m_fck, CK_3XXX), + CLK("omap_dss", "sys_clk", &dss2_alwon_fck, CK_3XXX), + CLK("omap_dss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omap_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index e8cb32fd7f1..bfaed63690d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -34,7 +34,6 @@ #include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" -#include "prm44xx.h" #include "prm-regbits-44xx.h" #include "control.h" #include "scrm44xx.h" @@ -3107,11 +3106,16 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), + CLK("omap_dss", "sys_clk", &dss_sys_clk, CK_443X), + CLK("omap_dss", "tv_clk", &dss_tv_clk, CK_443X), + CLK("omap_dss", "dss_clk", &dss_dss_clk, CK_443X), + CLK("omap_dss", "video_clk", &dss_48mhz_clk, CK_443X), + CLK("omap_dss", "fck", &dss_fck, CK_443X), + /* + * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility + * with OMAP2/3. + */ + CLK("omap_dss", "ick", &dummy_ck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index e20b98636ab..58e42f76603 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) if (!clkdm1 || !clkdm2) return -EINVAL; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) { pr_debug("clockdomain: hardware cannot set/clear wake up of " @@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) struct clkdm_dep *cd; u32 mask = 0; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s: %s: not yet implemented\n", + clkdm->name, __func__); + return -EINVAL; + } + if (!clkdm) return -EINVAL; @@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_add_autodeps(clkdm); @@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 51920fc7fc5..10622c914ab 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -30,8 +30,6 @@ #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" #include "prcm44xx.h" diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c new file mode 100644 index 00000000000..cc7b4f3070d --- /dev/null +++ b/arch/arm/mach-omap2/display.c @@ -0,0 +1,103 @@ +/* + * OMAP2plus display device setup / initialization. + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Senthilvadivu Guruswamy + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/display.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> + +static struct platform_device omap_display_device = { + .name = "omap_display", + .id = -1, + .dev = { + .platform_data = NULL, + }, +}; + +static struct omap_device_pm_latency omap_dss_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +int __init omap_display_init(struct omap_dss_board_info + *board_data) +{ + int r = 0; + struct omap_hwmod *oh; + struct omap_device *od; + int i; + struct omap_display_platform_data pdata; + + /* + * omap: valid DSS hwmod names + * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc + * omap3,4: dss_dsi1 + * omap4: dss_dsi2, dss_hdmi + */ + char *oh_name[] = {"dss_core", "dss_dispc", "dss_rfbi", "dss_venc", "dss_dsi1", + "dss_dsi2", "dss_hdmi"}; + char *dev_name[] = {"omap_dss", "omap_dispc", "omap_rfbi", "omap_venc", "omap_dsi1", + "omap_dsi2", "omap_hdmi"}; + int oh_count; + + memset(&pdata, 0, sizeof(pdata)); + + if (cpu_is_omap24xx()) + oh_count = ARRAY_SIZE(oh_name) - 3; + /* last 3 hwmod dev in oh_name are not available for omap2 */ + else if (cpu_is_omap44xx()) + oh_count = ARRAY_SIZE(oh_name); + else + oh_count = ARRAY_SIZE(oh_name) - 2; + /* last 2 hwmod dev in oh_name are not available for omap3 */ + + + pdata.board_data = board_data; + pdata.board_data->get_last_off_on_transaction_id = NULL; + + for (i = 0; i < oh_count; i++) { + oh = omap_hwmod_lookup(oh_name[i]); + if (!oh) { + pr_err("Could not look up %s\n", oh_name[i]); + return -ENODEV; + } + od = omap_device_build(dev_name[i], -1, oh, &pdata, + sizeof(struct omap_display_platform_data), + omap_dss_latency, + ARRAY_SIZE(omap_dss_latency), 0); + + if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", + oh_name[i])) + return -ENODEV; + } + omap_display_device.dev.platform_data = board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) + printk(KERN_ERR "Unable to register OMAP-Display device\n"); + + return r; +} diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index d2f15f5cfd3..34922b2d2e3 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) if (IS_ERR(od)) { pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, name, oh->name); - return IS_ERR(od); + return PTR_ERR(od); } mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); diff --git a/arch/arm/mach-omap2/dvfs.c b/arch/arm/mach-omap2/dvfs.c new file mode 100644 index 00000000000..1e5492c2ecb --- /dev/null +++ b/arch/arm/mach-omap2/dvfs.c @@ -0,0 +1,751 @@ +/* + * OMAP3/OMAP4 DVFS Management Routines + * + * Author: Vishwanath BS <vishwanath.bs@ti.com> + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Vishwanath BS <vishwanath.bs@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/plist.h> +#include <linux/slab.h> +#include <linux/opp.h> +#include <plat/common.h> +#include <plat/voltage.h> +#include <plat/omap_device.h> +#include <plat/smartreflex.h> + +/** + * struct omap_dev_user_list - Structure maitain userlist per device + * + * @dev: The device requesting for a particular frequency + * @node: The list head entry + * @freq: frequency being requested + * + * Using this structure, user list (requesting dev * and frequency) for + * each device is maintained. This is how we can have different devices + * at different frequencies (to support frequency locking and throttling). + * Even if one of the devices in a given vdd has locked it's frequency, + * other's can still scale their frequency using this list. + * If no one has placed a frequency request for a device, then device is + * set to the frequency from it's opp table. + */ +struct omap_dev_user_list { + struct device *dev; + struct plist_node node; + u32 freq; +}; + +/** + * struct omap_vdd_dev_list - Device list per vdd + * + * @dev: The device belonging to a particular vdd + * @node: The list head entry + */ +struct omap_vdd_dev_list { + struct device *dev; + struct list_head node; + struct plist_head user_list; + spinlock_t user_lock; /* spinlock for plist */ +}; + +/** + * struct omap_vdd_user_list - The per vdd user list + * + * @dev: The device asking for the vdd to be set at a particular + * voltage + * @node: The list head entry + * @volt: The voltage requested by the device <dev> + */ +struct omap_vdd_user_list { + struct device *dev; + struct plist_node node; + u32 volt; +}; + +/** + * struct omap_vdd_dvfs_info - The per vdd dvfs info + * + * @user_lock: spinlock for plist operations + * @user_list: The vdd user list + * @scaling_mutex: Mutex for protecting dvfs data structures for a vdd + * @voltdm: Voltage domains for which dvfs info stored + * + * This is a fundamental structure used to store all the required + * DVFS related information for a vdd. + */ +struct omap_vdd_dvfs_info { + spinlock_t user_lock; /* spin lock */ + struct plist_head user_list; + struct mutex scaling_mutex; /* dvfs mutex */ + struct voltagedomain *voltdm; + struct list_head dev_list; + struct device vdd_device; +}; + +static struct omap_vdd_dvfs_info *omap_dvfs_info_list; +static int omap_nr_vdd; + +static struct voltagedomain omap3_vdd[] = { + { + .name = "mpu", + }, + { + .name = "core", + }, +}; +static int omap_dvfs_voltage_scale(struct omap_vdd_dvfs_info *dvfs_info); + +static int __init omap_dvfs_init(void); + +static struct omap_vdd_dvfs_info *get_dvfs_info(struct voltagedomain *voltdm) +{ + int i; + if (!voltdm || !omap_dvfs_info_list) + return NULL; + + for (i = 0; i < omap_nr_vdd; i++) + if (omap_dvfs_info_list[i].voltdm == voltdm) + return &omap_dvfs_info_list[i]; + + pr_warning("%s: unable find dvfs info for vdd %s\n", + __func__, voltdm->name); + return NULL; +} + +/** + * omap_dvfs_find_voltage() - search for given voltage + * @dev: device pointer associated with the opp type + * @volt: voltage to search for + * + * Searches for exact match in the opp list and returns handle to the matching + * opp if found, else returns ERR_PTR in case of error and should be handled + * using IS_ERR. If there are multiple opps with same voltage, it will return + * the first available entry. + */ +static struct opp *omap_dvfs_find_voltage(struct device *dev, + unsigned long volt) +{ + struct opp *opp = ERR_PTR(-ENODEV); + unsigned long f = 0; + + do { + opp = opp_find_freq_ceil(dev, &f); + if (IS_ERR(opp)) + break; + if (opp_get_voltage(opp) >= volt) + break; + f++; + } while (1); + + return opp; +} + +/** + * omap_dvfs_add_vdd_user() - Add a voltage request + * @dvfs_info: omap_vdd_dvfs_info pointer for the required vdd + * @dev: device making the request + * @volt: requesting voltage in uV + * + * Adds the given devices' voltage request into corresponding + * vdd's omap_vdd_dvfs_info user list (plist). This list is used + * to find the maximum voltage request for a given vdd. + * + * Returns 0 on success. + */ +static int omap_dvfs_add_vdd_user(struct omap_vdd_dvfs_info *dvfs_info, + struct device *dev, unsigned long volt) +{ + struct omap_vdd_user_list *user = NULL, *temp_user; + struct plist_node *node; + + if (!dvfs_info || IS_ERR(dvfs_info)) { + dev_warn(dev, "%s: VDD specified does not exist!\n", __func__); + return -EINVAL; + } + + mutex_lock(&dvfs_info->scaling_mutex); + + plist_for_each_entry(temp_user, &dvfs_info->user_list, node) { + if (temp_user->dev == dev) { + user = temp_user; + break; + } + } + + if (!user) { + user = kzalloc(sizeof(struct omap_vdd_user_list), GFP_KERNEL); + if (!user) { + dev_err(dev, "%s: Unable to creat a new user for vdd_%s\n", + __func__, dvfs_info->voltdm->name); + mutex_unlock(&dvfs_info->scaling_mutex); + return -ENOMEM; + } + user->dev = dev; + } else { + plist_del(&user->node, &dvfs_info->user_list); + } + + plist_node_init(&user->node, volt); + plist_add(&user->node, &dvfs_info->user_list); + node = plist_last(&dvfs_info->user_list); + user->volt = node->prio; + + mutex_unlock(&dvfs_info->scaling_mutex); + + return 0; +} + +/** + * omap_dvfs_remove_vdd_user() - Remove a voltage request + * @dvfs_info: omap_vdd_dvfs_info pointer for the required vdd + * @dev: device making the request + * + * Removes the given devices' voltage request from corresponding + * vdd's omap_vdd_dvfs_info user list (plist). + * + * Returns 0 on success. + */ +static int omap_dvfs_remove_vdd_user(struct omap_vdd_dvfs_info *dvfs_info, + struct device *dev) +{ + struct omap_vdd_user_list *user = NULL, *temp_user; + int ret = 0; + + if (!dvfs_info || IS_ERR(dvfs_info)) { + dev_err(dev, "%s: VDD specified does not exist!\n", __func__); + return -EINVAL; + } + + mutex_lock(&dvfs_info->scaling_mutex); + + plist_for_each_entry(temp_user, &dvfs_info->user_list, node) { + if (temp_user->dev == dev) { + user = temp_user; + break; + } + } + + if (user) + plist_del(&user->node, &dvfs_info->user_list); + else { + dev_err(dev, "%s: Unable to find the user for vdd_%s\n", + __func__, dvfs_info->voltdm->name); + ret = -ENOMEM; + } + mutex_unlock(&dvfs_info->scaling_mutex); + + return ret; +} + +/** + * omap_dvfs_register_device - Add a device into voltage domain + * @voltdm: voltage domain to which the device is to be added + * @dev: Device to be added + * + * This API will add a given device into user_list of corresponding + * vdd's omap_vdd_dvfs_info strucure. This list is traversed to scale + * frequencies of all the devices on a given vdd. This api is called + * while hwmod db is built for an omap_device. + * + * Returns 0 on success. + */ +int omap_dvfs_register_device(struct voltagedomain *voltdm, struct device *dev) +{ + struct omap_vdd_dev_list *temp_dev; + struct omap_vdd_dvfs_info *dvfs_info = get_dvfs_info(voltdm); + + if (!voltdm || IS_ERR(voltdm) || !dvfs_info) { + dev_warn(dev, "%s: VDD specified does not exist!\n", __func__); + return -EINVAL; + } + + list_for_each_entry(temp_dev, &dvfs_info->dev_list, node) { + if (temp_dev->dev == dev) { + dev_warn(dev, "%s: Device already added to vdee_%s\n", + __func__, dvfs_info->voltdm->name); + return -EINVAL; + } + } + + temp_dev = kzalloc(sizeof(struct omap_vdd_dev_list), GFP_KERNEL); + if (!temp_dev) { + dev_err(dev, "%s: Unable to creat a new device for vdd_%s\n", + __func__, dvfs_info->voltdm->name); + return -ENOMEM; + } + + /* Initialize priority ordered list */ + spin_lock_init(&temp_dev->user_lock); + plist_head_init(&temp_dev->user_list, &temp_dev->user_lock); + + temp_dev->dev = dev; + list_add(&temp_dev->node, &dvfs_info->dev_list); + + return 0; +} + +/** + * omap_dvfs_add_freq_request() - add a requested device frequency + * + * + * @dvfs_info: omap_vdd_dvfs_info pointer for the required vdd + * @req_dev: device making the request + * @target_dev: target device for which frequency request is being made + * @freq: target device frequency + * + * This API adds a requested frequency into target's device frequency list. + * + * Returns 0 on success. + */ +static int omap_dvfs_add_freq_request(struct omap_vdd_dvfs_info *dvfs_info, + struct device *req_dev, struct device *target_dev, unsigned long freq) +{ + struct omap_dev_user_list *dev_user = NULL, *tmp_user; + struct omap_vdd_dev_list *temp_dev; + + if (!dvfs_info || IS_ERR(dvfs_info)) { + dev_warn(target_dev, "%s: VDD specified does not exist!\n", + __func__); + return -EINVAL; + } + + mutex_lock(&dvfs_info->scaling_mutex); + + list_for_each_entry(temp_dev, &dvfs_info->dev_list, node) { + if (temp_dev->dev == target_dev) + break; + } + + if (temp_dev->dev != target_dev) { + dev_warn(target_dev, "%s: target_dev does not exist!\n", + __func__); + mutex_unlock(&dvfs_info->scaling_mutex); + return -EINVAL; + } + + plist_for_each_entry(tmp_user, &temp_dev->user_list, node) { + if (tmp_user->dev == req_dev) { + dev_user = tmp_user; + break; + } + } + + if (!dev_user) { + dev_user = kzalloc(sizeof(struct omap_dev_user_list), + GFP_KERNEL); + if (!dev_user) { + dev_err(target_dev, "%s: Unable to creat a new user for vdd_%s\n", + __func__, dvfs_info->voltdm->name); + mutex_unlock(&dvfs_info->scaling_mutex); + return -ENOMEM; + } + dev_user->dev = req_dev; + } else { + plist_del(&dev_user->node, &temp_dev->user_list); + } + + plist_node_init(&dev_user->node, freq); + plist_add(&dev_user->node, &temp_dev->user_list); + + mutex_unlock(&dvfs_info->scaling_mutex); + return 0; +} + +/** + * omap_dvfs_remove_freq_request() - Remove the requested device frequency + * + * @dvfs_info: omap_vdd_dvfs_info pointer for the required vdd + * @req_dev: device removing the request + * @target_dev: target device from which frequency request is being removed + * + * This API removes a requested frequency from target's device frequency list. + * + * Returns 0 on success. + */ + +static int omap_dvfs_remove_freq_request(struct omap_vdd_dvfs_info *dvfs_info, + struct device *req_dev, struct device *target_dev) +{ + struct omap_dev_user_list *dev_user = NULL, *tmp_user; + int ret = 0; + struct omap_vdd_dev_list *temp_dev; + + if (!dvfs_info || IS_ERR(dvfs_info)) { + dev_warn(target_dev, "%s: VDD specified does not exist!\n", + __func__); + return -EINVAL; + } + + mutex_lock(&dvfs_info->scaling_mutex); + + list_for_each_entry(temp_dev, &dvfs_info->dev_list, node) { + if (temp_dev->dev == target_dev) + break; + } + + if (temp_dev->dev != target_dev) { + dev_warn(target_dev, "%s: target_dev does not exist!\n", + __func__); + mutex_unlock(&dvfs_info->scaling_mutex); + return -EINVAL; + } + + plist_for_each_entry(tmp_user, &temp_dev->user_list, node) { + if (tmp_user->dev == req_dev) { + dev_user = tmp_user; + break; + } + } + + if (dev_user) + plist_del(&dev_user->node, &temp_dev->user_list); + else { + dev_err(target_dev, "%s: Unable to remove the user for vdd_%s\n", + __func__, dvfs_info->voltdm->name); + ret = -EINVAL; + } + + return ret; +} + +/* Calculate dependency vdd voltage for given vdd voltage */ +static int calc_dep_vdd_volt(struct device *dev, + struct omap_vdd_info *main_vdd, unsigned long main_volt) +{ + struct omap_vdd_dep_info *dep_vdds; + int i, ret = 0; + + if (!main_vdd->dep_vdd_info) { + pr_debug("%s: No dependent VDD's for vdd_%s\n", + __func__, main_vdd->voltdm.name); + return 0; + } + + dep_vdds = main_vdd->dep_vdd_info; + + for (i = 0; i < main_vdd->nr_dep_vdd; i++) { + struct omap_vdd_dep_volt *volt_table = dep_vdds[i].dep_table; + int nr_volt = 0; + unsigned long dep_volt = 0, act_volt = 0; + + while (volt_table[nr_volt].main_vdd_volt != 0) { + if (volt_table[nr_volt].main_vdd_volt == main_volt) { + dep_volt = volt_table[nr_volt].dep_vdd_volt; + break; + } + nr_volt++; + } + if (!dep_volt) { + pr_warning("%s: Not able to find a matching volt for" + "vdd_%s corresponding to vdd_%s %ld volt\n", + __func__, dep_vdds[i].name, + main_vdd->voltdm.name, main_volt); + ret = -EINVAL; + continue; + } + + if (!dep_vdds[i].voltdm) + dep_vdds[i].voltdm = + omap_voltage_domain_lookup(dep_vdds[i].name); + + act_volt = dep_volt; + + /* See if dep_volt is possible for the vdd*/ + ret = omap_dvfs_add_vdd_user(get_dvfs_info(dep_vdds[i].voltdm), + dev, act_volt); + } + + return ret; +} + +/* Scale dependent VDD */ +static int scale_dep_vdd(struct omap_vdd_dvfs_info *vdd_info) +{ + struct omap_vdd_dep_info *dep_vdds; + int i; + struct omap_vdd_info *main_vdd; + struct voltagedomain *voltdm = vdd_info->voltdm; + main_vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + + if (!main_vdd->dep_vdd_info) { + pr_debug("%s: No dependent VDD's for vdd_%s\n", + __func__, main_vdd->voltdm.name); + return 0; + } + + dep_vdds = main_vdd->dep_vdd_info; + + for (i = 0; i < main_vdd->nr_dep_vdd; i++) + omap_dvfs_voltage_scale(get_dvfs_info(dep_vdds[i].voltdm)); + + return 0; +} + +/** + * omap_dvfs_voltage_scale() : API to scale the devices associated with a + * voltage domain vdd voltage. + * + * @dvfs_info: omap_vdd_dvfs_info pointer for the required vdd + * + * This API runs through the list of devices associated with the + * voltage domain and scales the device rates to the one requested + * by the user or those corresponding to the new voltage of the + * voltage domain. Target voltage is the highest voltage in the vdd_user_list. + * + * Returns 0 on success + * else the error value. + */ +static int omap_dvfs_voltage_scale(struct omap_vdd_dvfs_info *dvfs_info) +{ + unsigned long curr_volt; + int is_volt_scaled = 0; + struct omap_vdd_dev_list *temp_dev; + struct plist_node *node; + int ret = 0; + struct voltagedomain *voltdm; + unsigned long volt; + struct omap_vdd_info *vdd; + + if (!dvfs_info || IS_ERR(dvfs_info)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return -EINVAL; + } + + voltdm = dvfs_info->voltdm; + vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + + mutex_lock(&dvfs_info->scaling_mutex); + + /* Find the highest voltage being requested */ + node = plist_last(&dvfs_info->user_list); + volt = node->prio; + + curr_volt = omap_voltage_get_nom_volt(voltdm); + + /* Disable smartreflex module across voltage and frequency scaling */ + omap_sr_disable(voltdm); + + if (curr_volt == volt) { + is_volt_scaled = 1; + } else if (curr_volt < volt) { + ret = omap_voltage_scale_vdd(voltdm, volt); + if (ret) { + pr_warning("%s: Unable to scale the %s to %ld volt\n", + __func__, voltdm->name, volt); + omap_sr_enable(voltdm); + mutex_unlock(&dvfs_info->scaling_mutex); + return ret; + } + is_volt_scaled = 1; + } + + list_for_each_entry(temp_dev, &dvfs_info->dev_list, node) { + struct device *dev; + struct opp *opp; + unsigned long freq; + + dev = temp_dev->dev; + if (!plist_head_empty(&temp_dev->user_list)) { + node = plist_last(&temp_dev->user_list); + freq = node->prio; + } else { + opp = omap_dvfs_find_voltage(dev, volt); + if (IS_ERR(opp)) + continue; + freq = opp_get_freq(opp); + } + + if (freq == omap_device_get_rate(dev)) { + dev_dbg(dev, "%s: Already at the requested" + "rate %ld\n", __func__, freq); + continue; + } + + ret |= omap_device_set_rate(dev, freq); + } + + if (!is_volt_scaled && !ret) + omap_voltage_scale_vdd(voltdm, volt); + + /* Enable Smartreflex module */ + omap_sr_enable(voltdm); + + mutex_unlock(&dvfs_info->scaling_mutex); + + /* calculate the voltages for dependent vdd's */ + if (calc_dep_vdd_volt(&dvfs_info->vdd_device, vdd, volt)) { + pr_warning("%s: Error in calculating dependent vdd voltages" + "for vdd_%s\n", __func__, voltdm->name); + return -EINVAL; + } + + /* Scale dependent vdds */ + scale_dep_vdd(dvfs_info); + + return 0; +} + +/** + * omap_device_scale() - Set a new rate at which the device is to operate + * @req_dev: pointer to the device requesting the scaling. + * @target_dev: pointer to the device that is to be scaled + * @rate: the rnew rate for the device. + * + * This API gets the device opp table associated with this device and + * tries putting the device to the requested rate and the voltage domain + * associated with the device to the voltage corresponding to the + * requested rate. Since multiple devices can be assocciated with a + * voltage domain this API finds out the possible voltage the + * voltage domain can enter and then decides on the final device + * rate. Return 0 on success else the error value + */ +int omap_device_scale(struct device *req_dev, struct device *target_dev, + unsigned long rate) +{ + struct opp *opp; + unsigned long volt, freq, min_freq, max_freq; + struct omap_vdd_dvfs_info *dvfs_info; + struct platform_device *pdev; + struct omap_device *od; + int ret = 0; + + pdev = container_of(target_dev, struct platform_device, dev); + od = container_of(pdev, struct omap_device, pdev); + + /* + * Figure out if the desired frquency lies between the + * maximum and minimum possible for the particular device + */ + min_freq = 0; + if (IS_ERR(opp_find_freq_ceil(target_dev, &min_freq))) { + dev_err(target_dev, "%s: Unable to find lowest opp\n", + __func__); + return -ENODEV; + } + + max_freq = ULONG_MAX; + if (IS_ERR(opp_find_freq_floor(target_dev, &max_freq))) { + dev_err(target_dev, "%s: Unable to find highest opp\n", + __func__); + return -ENODEV; + } + + if (rate < min_freq) + freq = min_freq; + else if (rate > max_freq) + freq = max_freq; + else + freq = rate; + + opp = opp_find_freq_ceil(target_dev, &freq); + if (IS_ERR(opp)) { + dev_err(target_dev, "%s: Unable to find OPP for freq%ld\n", + __func__, rate); + return -ENODEV; + } + + /* Get the voltage corresponding to the requested frequency */ + volt = opp_get_voltage(opp); + + /* + * Call into the voltage layer to get the final voltage possible + * for the voltage domain associated with the device. + */ + + if (rate) { + dvfs_info = get_dvfs_info(od->hwmods[0]->voltdm); + + ret = omap_dvfs_add_freq_request(dvfs_info, req_dev, + target_dev, freq); + if (ret) { + dev_err(target_dev, "%s: Unable to add frequency request\n", + __func__); + return ret; + } + + ret = omap_dvfs_add_vdd_user(dvfs_info, req_dev, volt); + if (ret) { + dev_err(target_dev, "%s: Unable to add voltage request\n", + __func__); + omap_dvfs_remove_freq_request(dvfs_info, req_dev, + target_dev); + return ret; + } + } else { + dvfs_info = get_dvfs_info(od->hwmods[0]->voltdm); + + ret = omap_dvfs_remove_freq_request(dvfs_info, req_dev, + target_dev); + if (ret) { + dev_err(target_dev, "%s: Unable to remove frequency request\n", + __func__); + return ret; + } + + ret = omap_dvfs_remove_vdd_user(dvfs_info, req_dev); + if (ret) { + dev_err(target_dev, "%s: Unable to remove voltage request\n", + __func__); + return ret; + } + } + + /* Do the actual scaling */ + ret = omap_dvfs_voltage_scale(dvfs_info); + if (!ret) + if (omap_device_get_rate(target_dev) >= rate) + return 0; + + return ret; +} +EXPORT_SYMBOL(omap_device_scale); + +/** + * omap_dvfs_init() - Initialize omap dvfs layer + * + * Initalizes omap dvfs layer. It basically allocates memory for + * omap_dvfs_info_list and populates voltdm pointer inside + * omap_vdd_dvfs_info structure for all the VDDs. + * + * Returns 0 on success. + */ +static int __init omap_dvfs_init() +{ + int i; + struct voltagedomain *vdd_list; + if (cpu_is_omap34xx()) { + omap_nr_vdd = 2; + vdd_list = omap3_vdd; + } + + omap_dvfs_info_list = kzalloc(omap_nr_vdd * + sizeof(struct omap_vdd_dvfs_info), GFP_KERNEL); + if (!omap_dvfs_info_list) { + pr_warning("%s: Unable to allocate memory for vdd_list", + __func__); + return -ENOMEM; + } + + for (i = 0; i < omap_nr_vdd; i++) { + omap_dvfs_info_list[i].voltdm = + omap_voltage_domain_lookup(vdd_list[i].name); + /* Init the plist */ + spin_lock_init(&omap_dvfs_info_list[i].user_lock); + plist_head_init(&omap_dvfs_info_list[i].user_list, + &omap_dvfs_info_list[i].user_lock); + /* Init the DVFS mutex */ + mutex_init(&omap_dvfs_info_list[i].scaling_mutex); + /* Init the device list */ + INIT_LIST_HEAD(&omap_dvfs_info_list[i].dev_list); + } + + return 0; +} +core_initcall(omap_dvfs_init); diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 6a4d4136002..6049f465ec8 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -19,6 +19,9 @@ #define UART_OFFSET(addr) ((addr) & 0x00ffffff) +#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -36,7 +39,7 @@ omap_uart_lsr: .word 0 /* Use omap_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rp, =omap_uart_phys @ MMU enabled add \rv, \rp, #4 @ omap_uart_virt ldr \rp, [\rp, #0] @@ -49,7 +52,7 @@ omap_uart_lsr: .word 0 mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ @@ -94,7 +97,7 @@ omap_uart_lsr: .word 0 95: ldr \rp, =ZOOM_UART_BASE mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] ldr \rp, =ZOOM_UART_VIRT @@ -109,7 +112,7 @@ omap_uart_lsr: .word 0 98: add \rp, \rp, #0x48000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] sub \rp, \rp, #0x48000000 @ phys base @@ -131,7 +134,7 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index befa321c4c1..81985a665cb 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -38,20 +38,6 @@ */ #ifdef MULTI_OMAP2 - -/* - * We use __glue to avoid errors with multiple definitions of - * .globl omap_irq_base as it's included from entry-armv.S but not - * from entry-common.S. - */ -#ifdef __glue - .pushsection .data - .globl omap_irq_base -omap_irq_base: - .word 0 - .popsection -#endif - /* * Configure the interrupt base on the first interrupt. * See also omap_irq_base_init for setting omap_irq_base. diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e66687b0b9d..c2032041d26 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +void __iomem *omap_irq_base; + /* * Initialize asm_irq_base for entry-macro.S */ static inline void omap_irq_base_init(void) { - extern void __iomem *omap_irq_base; - -#ifdef MULTI_OMAP2 if (cpu_is_omap24xx()) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); else if (cpu_is_omap34xx()) @@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); else pr_err("Could not initialize omap_irq_base\n"); -#endif } void __init omap2_init_common_infrastructure(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index df8d2f2872c..98148b6c36e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, struct omap_mux *mux = NULL; struct omap_mux_entry *e; const char *mode_name; - int found = 0, found_mode, mode0_len = 0; + int found = 0, found_mode = 0, mode0_len = 0; struct list_head *muxmodes = &partition->muxmodes; mode_name = strchr(muxname, '.'); @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b85c630b64d..21014dee5e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -18,7 +18,8 @@ #include <plat/serial.h> #include <plat/i2c.h> #include <plat/gpio.h> - +#include <plat/l3_2xxx.h> +#include <plat/l4_2xxx.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" @@ -38,6 +39,10 @@ static struct omap_hwmod omap2420_mpu_hwmod; static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; +static struct omap_hwmod omap2420_dss_core_hwmod; +static struct omap_hwmod omap2420_dss_dispc_hwmod; +static struct omap_hwmod omap2420_dss_rfbi_hwmod; +static struct omap_hwmod omap2420_dss_venc_hwmod; static struct omap_hwmod omap2420_wd_timer2_hwmod; static struct omap_hwmod omap2420_gpio1_hwmod; static struct omap_hwmod omap2420_gpio2_hwmod; @@ -64,6 +69,19 @@ static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = { &omap2420_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap2420_dss__l3 = { + .master = &omap2420_dss_core_hwmod, + .slave = &omap2420_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = { &omap2420_l3_main__l4_core, @@ -470,6 +488,291 @@ static struct omap_hwmod omap2420_uart3_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2420_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2420_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap2420_dss_irqs[] = { + { .irq = 25 }, +}; + +static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = { + &omap2420_dss__l3, +}; + +static struct omap_hwmod_addr_space omap2420_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { + &omap2420_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +static struct omap_hwmod omap2420_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2420_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .mpu_irqs = omap2420_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dss_irqs), + .sdma_reqs = omap2420_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap2420_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), + .masters = omap2420_dss_masters, + .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2420_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2420_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_dispc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { + &omap2420_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap2420_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2420_dispc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .slaves = omap2420_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2420_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2420_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap2420_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_rfbi_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { + &omap2420_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap2420_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2420_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2420_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap2420_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap2420_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_venc_hwmod, + .clk = "dss_54m_fck", + .addr = omap2420_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_venc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { + &omap2420_l4_core__dss_venc, +}; + +static struct omap_hwmod omap2420_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2420_venc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2420_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C common */ static struct omap_hwmod_class_sysconfig i2c_sysc = { .rev_offs = 0x00, @@ -874,6 +1177,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_uart1_hwmod, &omap2420_uart2_hwmod, &omap2420_uart3_hwmod, + /* dss class */ + &omap2420_dss_core_hwmod, + &omap2420_dss_dispc_hwmod, + &omap2420_dss_rfbi_hwmod, + &omap2420_dss_venc_hwmod, + /* i2c class */ &omap2420_i2c1_hwmod, &omap2420_i2c2_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 8ecfbcde13b..1ef3f3fd862 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -18,6 +18,7 @@ #include <plat/serial.h> #include <plat/i2c.h> #include <plat/gpio.h> +#include <plat/l3_2xxx.h> #include "omap_hwmod_common_data.h" @@ -38,6 +39,10 @@ static struct omap_hwmod omap2430_mpu_hwmod; static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; +static struct omap_hwmod omap2430_dss_core_hwmod; +static struct omap_hwmod omap2430_dss_dispc_hwmod; +static struct omap_hwmod omap2430_dss_rfbi_hwmod; +static struct omap_hwmod omap2430_dss_venc_hwmod; static struct omap_hwmod omap2430_wd_timer2_hwmod; static struct omap_hwmod omap2430_gpio1_hwmod; static struct omap_hwmod omap2430_gpio2_hwmod; @@ -65,6 +70,19 @@ static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = { &omap2430_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap2430_dss__l3 = { + .master = &omap2430_dss_core_hwmod, + .slave = &omap2430_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = { &omap2430_l3_main__l4_core, @@ -469,6 +487,266 @@ static struct omap_hwmod omap2430_uart3_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2430_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2430_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap2430_dss_irqs[] = { + { .irq = 25 }, +}; +static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = { + &omap2430_dss__l3, +}; + +static struct omap_hwmod_addr_space omap2430_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { + &omap2430_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +static struct omap_hwmod omap2430_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2430_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .mpu_irqs = omap2430_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dss_irqs), + .sdma_reqs = omap2430_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_dss_sdma_chs), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap2430_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), + .masters = omap2430_dss_masters, + .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2430_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2430_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_dispc_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { + &omap2430_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap2430_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2430_dispc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .slaves = omap2430_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2430_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2430_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap2430_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_rfbi_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { + &omap2430_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap2430_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2430_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2430_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap2430_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap2430_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_venc_hwmod, + .clk = "dss_54m_fck", + .addr = omap2430_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_venc_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { + &omap2430_l4_core__dss_venc, +}; + +static struct omap_hwmod omap2430_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2430_venc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2430_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C common */ static struct omap_hwmod_class_sysconfig i2c_sysc = { .rev_offs = 0x00, @@ -929,6 +1207,12 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_uart1_hwmod, &omap2430_uart2_hwmod, &omap2430_uart3_hwmod, + /* dss class */ + &omap2430_dss_core_hwmod, + &omap2430_dss_dispc_hwmod, + &omap2430_dss_rfbi_hwmod, + &omap2430_dss_venc_hwmod, + /* i2c class */ &omap2430_i2c1_hwmod, &omap2430_i2c2_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 8d8181334f8..5cff284b7a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -18,6 +18,7 @@ #include <plat/cpu.h> #include <plat/dma.h> #include <plat/serial.h> +#include <plat/l3_3xxx.h> #include <plat/l4_3xxx.h> #include <plat/i2c.h> #include <plat/gpio.h> @@ -44,6 +45,12 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; static struct omap_hwmod omap3xxx_wd_timer2_hwmod; +static struct omap_hwmod omap3430es1_dss_core_hwmod; +static struct omap_hwmod omap3xxx_dss_core_hwmod; +static struct omap_hwmod omap3xxx_dss_dispc_hwmod; +static struct omap_hwmod omap3xxx_dss_dsi1_hwmod; +static struct omap_hwmod omap3xxx_dss_rfbi_hwmod; +static struct omap_hwmod omap3xxx_dss_venc_hwmod; static struct omap_hwmod omap3xxx_i2c1_hwmod; static struct omap_hwmod omap3xxx_i2c2_hwmod; static struct omap_hwmod omap3xxx_i2c3_hwmod; @@ -84,6 +91,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = { &omap3xxx_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = { + .master = &omap3xxx_dss_core_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { &omap3xxx_l3_main__l4_core, @@ -94,6 +114,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { static struct omap_hwmod omap3xxx_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, + .vdd_name = "core", .masters = omap3xxx_l3_main_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), .slaves = omap3xxx_l3_main_slaves, @@ -384,6 +405,7 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { .name = "mpu", .class = &mpu_hwmod_class, .main_clk = "arm_fck", + .vdd_name = "mpu", .masters = omap3xxx_mpu_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -412,6 +434,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = { static struct omap_hwmod omap3xxx_iva_hwmod = { .name = "iva", .class = &iva_hwmod_class, + .vdd_name = "mpu", .masters = omap3xxx_iva_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) @@ -664,6 +687,410 @@ static struct omap_hwmod_class i2c_class = { .sysc = &i2c_sysc, }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap3xxx_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = { + { .irq = 25 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, + { .name = "dsi1", .dma_req = 74 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = { + &omap3xxx_dss__l3, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3430es1_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = { + &omap3430es1_l4_core__dss, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { + &omap3xxx_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_tv_fck" }, + { .role = "video_clk", .clk = "dss_96m_fck" }, + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + +static struct omap_hwmod omap3430es1_dss_core_hwmod = { + .name = "dss_core", + .class = &omap3xxx_dss_hwmod_class, + .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ + .mpu_irqs = omap3xxx_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), + .sdma_reqs = omap3xxx_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), + + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap3430es1_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), + .masters = omap3xxx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod omap3xxx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap3xxx_dss_hwmod_class, + .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ + .mpu_irqs = omap3xxx_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), + .sdma_reqs = omap3xxx_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), + + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap3xxx_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves), + .masters = omap3xxx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 | + CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_MIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3xxx_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { + &omap3xxx_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap3xxx_dispc_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dsi' class + * display serial interface controller + */ + +static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { + .name = "dsi", +}; + +/* dss_dsi1 */ +static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { + { + .pa_start = 0x4804FC00, + .pa_end = 0x4804FFFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dsi1_hwmod, + .addr = omap3xxx_dss_dsi1_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dsi1 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { + &omap3xxx_l4_core__dss_dsi1, +}; + +static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { + .name = "dss_dsi1", + .class = &omap3xxx_dsi_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_dsi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap3xxx_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP , + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { + &omap3xxx_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap3xxx_rfbi_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap3xxx_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap3xxx_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_venc_hwmod, + .clk = "dss_tv_fck", + .addr = omap3xxx_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_venc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { + &omap3xxx_l4_core__dss_venc, +}; + +static struct omap_hwmod omap3xxx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap3xxx_venc_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C1 */ static struct omap_i2c_dev_attr i2c1_dev_attr = { @@ -1368,6 +1795,15 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, &omap3xxx_uart4_hwmod, + /* dss class */ + &omap3430es1_dss_core_hwmod, + &omap3xxx_dss_core_hwmod, + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + + /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, &omap3xxx_i2c3_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c2806bd11fb..0bd579e98e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -43,6 +43,13 @@ static struct omap_hwmod omap44xx_dma_system_hwmod; static struct omap_hwmod omap44xx_dmm_hwmod; static struct omap_hwmod omap44xx_dsp_hwmod; +static struct omap_hwmod omap44xx_dss_core_hwmod; +static struct omap_hwmod omap44xx_dss_dispc_hwmod; +static struct omap_hwmod omap44xx_dss_dsi1_hwmod; +static struct omap_hwmod omap44xx_dss_dsi2_hwmod; +static struct omap_hwmod omap44xx_dss_hdmi_hwmod; +static struct omap_hwmod omap44xx_dss_rfbi_hwmod; +static struct omap_hwmod omap44xx_dss_venc_hwmod; static struct omap_hwmod omap44xx_emif_fw_hwmod; static struct omap_hwmod omap44xx_iva_hwmod; static struct omap_hwmod omap44xx_l3_instr_hwmod; @@ -237,12 +244,21 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* dss -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { + .master = &omap44xx_dss_core_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l3_main_1 slave ports */ static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { &omap44xx_dsp__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, &omap44xx_mpu__l3_main_1, + &omap44xx_dss__l3_main_1, }; static struct omap_hwmod omap44xx_l3_main_1_hwmod = { @@ -746,6 +762,584 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* ==== DSS related classes ==== */ + /* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap44xx_dispc_sysc, +}; + +/* dss_dispc */ +static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = { + { .irq = 25 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = { + { .dma_req = 5 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { + { + .pa_start = 0x48041000, + .pa_end = 0x48041fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { + { + .pa_start = 0x58001000, + .pa_end = 0x58001fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dispc_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { + &omap44xx_l3_main_2__dss_dispc, + &omap44xx_l4_per__dss_dispc, +}; + +static struct omap_hwmod omap44xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap44xx_dispc_hwmod_class, + .mpu_irqs = omap44xx_dss_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs), + .sdma_reqs = omap44xx_dss_dispc_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'dsi' class + * display serial interface controller + */ +static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { + .name = "dsi", + .sysc = &omap44xx_dsi_sysc, +}; + +/* dss_dsi1 */ +static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = { + { .irq = 53 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = { + { .dma_req = 74 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = { + { + .pa_start = 0x48044000, + .pa_end = 0x480440ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { + { + .pa_start = 0x58004000, + .pa_end = 0x580040ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dsi1_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_dsi1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = { + &omap44xx_l3_main_2__dss_dsi1, + &omap44xx_l4_per__dss_dsi1, +}; + +static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { + .name = "dss_dsi1", + .class = &omap44xx_dsi_hwmod_class, + .mpu_irqs = omap44xx_dss_dsi1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_irqs), + .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dsi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* dss_dsi2 */ +static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = { + { .irq = 84 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = { + { .dma_req = 83 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = { + { + .pa_start = 0x48045000, + .pa_end = 0x480450ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { + { + .pa_start = 0x58005000, + .pa_end = 0x580050ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dsi2_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_dsi2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = { + &omap44xx_l3_main_2__dss_dsi2, + &omap44xx_l4_per__dss_dsi2, +}; + +static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { + .name = "dss_dsi2", + .class = &omap44xx_dsi_hwmod_class, + .mpu_irqs = omap44xx_dss_dsi2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_irqs), + .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dsi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'dss' class + * display sub-system + */ +static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { + .rev_offs = 0x0000, + .syss_offs = 0x0014, + .sysc_flags = SYSS_HAS_RESET_STATUS, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), +}; + +static struct omap_hwmod_class omap44xx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap44xx_dss_sysc, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = { + &omap44xx_dss__l3_main_1, +}; + +static struct omap_hwmod_irq_info omap44xx_dss_irqs[] = { + { .irq = 25 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = { + { + .pa_start = 0x48040000, + .pa_end = 0x4804007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_core_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { + { + .pa_start = 0x58000000, + .pa_end = 0x5800007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_core_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { + &omap44xx_l3_main_2__dss, + &omap44xx_l4_per__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "tv_clk", .clk = "dss_tv_clk" }, + { .role = "dss_clk", .clk = "dss_dss_clk" }, + { .role = "video_clk", .clk = "dss_48mhz_clk" }, +}; + +static struct omap_hwmod omap44xx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap44xx_dss_hwmod_class, + .mpu_irqs = omap44xx_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_irqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap44xx_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves), + .masters = omap44xx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'hdmi' class + * hdmi controller + */ + +static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { + .name = "hdmi", +}; + +/* dss_hdmi */ +static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = { + { .irq = 101 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = { + { .dma_req = 75 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = { + { + .pa_start = 0x48046000, + .pa_end = 0x48046fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_hdmi_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { + { + .pa_start = 0x58006000, + .pa_end = 0x58006fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_hdmi_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_hdmi slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = { + &omap44xx_l3_main_2__dss_hdmi, + &omap44xx_l4_per__dss_hdmi, +}; + +static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { + .name = "dss_hdmi", + .class = &omap44xx_hdmi_hwmod_class, + .mpu_irqs = omap44xx_dss_hdmi_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_irqs), + .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_hdmi_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + + /* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap44xx_rfbi_sysc, +}; + +/* dss_rfbi */ +static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { + { .dma_req = 13 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = { + { + .pa_start = 0x48042000, + .pa_end = 0x480420ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { + { + .pa_start = 0x58002000, + .pa_end = 0x580020ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_rfbi_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = { + &omap44xx_l3_main_2__dss_rfbi, + &omap44xx_l4_per__dss_rfbi, +}; + +static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap44xx_rfbi_hwmod_class, + .sdma_reqs = omap44xx_dss_rfbi_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class_sysconfig omap44xx_venc_sysc = { + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), +}; + +static struct omap_hwmod_class omap44xx_venc_hwmod_class = { + .name = "venc", + .sysc = &omap44xx_venc_sysc, +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = { + { + .pa_start = 0x48043000, + .pa_end = 0x480430ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { + { + .pa_start = 0x58003000, + .pa_end = 0x580030ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_venc_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = { + &omap44xx_l3_main_2__dss_venc, + &omap44xx_l4_per__dss_venc, +}; + +static struct omap_hwmod omap44xx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap44xx_venc_hwmod_class, + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + + /* * 'gpio' class * general purpose io module @@ -2031,6 +2625,15 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_dsp_hwmod, &omap44xx_dsp_c0_hwmod, + /* dss class */ + &omap44xx_dss_core_hwmod, + &omap44xx_dss_dispc_hwmod, + &omap44xx_dss_dsi1_hwmod, + &omap44xx_dss_dsi2_hwmod, + &omap44xx_dss_hdmi_hwmod, + &omap44xx_dss_rfbi_hwmod, + &omap44xx_dss_venc_hwmod, + /* gpio class */ &omap44xx_gpio1_hwmod, &omap44xx_gpio2_hwmod, diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 00e1d2b5368..5100125bc2f 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -59,8 +59,15 @@ static bool is_offset_valid; static u8 smps_offset; +/* + * Flag to ensure Smartreflex bit in TWL + * being cleared in board file is not overwritten. + */ +static bool __initdata twl_sr_enable_autoinit; +#define TWL4030_DCDC_GLOBAL_CFG 0x06 #define REG_SMPS_OFFSET 0xE0 +#define SMARTREFLEX_ENABLE BIT(3) static unsigned long twl4030_vsel_to_uv(const u8 vsel) { @@ -269,6 +276,18 @@ int __init omap3_twl_init(void) omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; } + /* + * The smartreflex bit on twl4030 specifies if the setting of voltage + * is done over the I2C_SR path. Since this setting is independent of + * the actual usage of smartreflex AVS module, we enable TWL SR bit + * by default irrespective of whether smartreflex AVS module is enabled + * on the OMAP side or not. This is because without this bit enabled, + * the voltage scaling through vp forceupdate/bypass mechanism of + * voltage scaling will not function on TWL over I2C_SR. + */ + if (!twl_sr_enable_autoinit) + omap3_twl_set_sr_bit(true); + voltdm = omap_voltage_domain_lookup("mpu"); omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); @@ -277,3 +296,44 @@ int __init omap3_twl_init(void) return 0; } + +/** + * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL + * @enable: enable SR mode in twl or not + * + * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure + * voltage scaling through OMAP SR works. Else, the smartreflex bit + * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but + * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct + * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, + * in those scenarios this bit is to be cleared (enable = false). + * + * Returns 0 on sucess, error is returned if I2C read/write fails. + */ +int __init omap3_twl_set_sr_bit(bool enable) +{ + u8 temp; + int ret; + if (twl_sr_enable_autoinit) + pr_warning("%s: unexpected multiple calls\n", __func__); + + ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp, + TWL4030_DCDC_GLOBAL_CFG); + if (ret) + goto err; + + if (enable) + temp |= SMARTREFLEX_ENABLE; + else + temp &= ~SMARTREFLEX_ENABLE; + + ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp, + TWL4030_DCDC_GLOBAL_CFG); + if (!ret) { + twl_sr_enable_autoinit = true; + return 0; + } +err: + pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret); + return ret; +} diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 0486fce8a92..eefd6aff3f2 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,20 +19,21 @@ #include <linux/module.h> #include <plat/cpu.h> +#include <plat/voltage.h> #include "omap_opp_data.h" static struct omap_opp_def __initdata omap34xx_opp_def_list[] = { /* MPU OPP1 */ - OPP_INITIALIZER("mpu", true, 125000000, 975000), + OPP_INITIALIZER("mpu", true, 125000000, OMAP3430_VDD_MPU_OPP1_UV), /* MPU OPP2 */ - OPP_INITIALIZER("mpu", true, 250000000, 1075000), + OPP_INITIALIZER("mpu", true, 250000000, OMAP3430_VDD_MPU_OPP2_UV), /* MPU OPP3 */ - OPP_INITIALIZER("mpu", true, 500000000, 1200000), + OPP_INITIALIZER("mpu", true, 500000000, OMAP3430_VDD_MPU_OPP3_UV), /* MPU OPP4 */ - OPP_INITIALIZER("mpu", true, 550000000, 1270000), + OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV), /* MPU OPP5 */ - OPP_INITIALIZER("mpu", true, 600000000, 1350000), + OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV), /* * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is @@ -42,47 +43,47 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = { * impact that frequency will do to the MPU and the whole system in * general. */ - OPP_INITIALIZER("l3_main", false, 41500000, 975000), + OPP_INITIALIZER("l3_main", false, 41500000, OMAP3430_VDD_CORE_OPP1_UV), /* L3 OPP2 */ - OPP_INITIALIZER("l3_main", true, 83000000, 1050000), + OPP_INITIALIZER("l3_main", true, 83000000, OMAP3430_VDD_CORE_OPP2_UV), /* L3 OPP3 */ - OPP_INITIALIZER("l3_main", true, 166000000, 1150000), + OPP_INITIALIZER("l3_main", true, 166000000, OMAP3430_VDD_CORE_OPP3_UV), /* DSP OPP1 */ - OPP_INITIALIZER("iva", true, 90000000, 975000), + OPP_INITIALIZER("iva", true, 90000000, OMAP3430_VDD_MPU_OPP1_UV), /* DSP OPP2 */ - OPP_INITIALIZER("iva", true, 180000000, 1075000), + OPP_INITIALIZER("iva", true, 180000000, OMAP3430_VDD_MPU_OPP2_UV), /* DSP OPP3 */ - OPP_INITIALIZER("iva", true, 360000000, 1200000), + OPP_INITIALIZER("iva", true, 360000000, OMAP3430_VDD_MPU_OPP3_UV), /* DSP OPP4 */ - OPP_INITIALIZER("iva", true, 400000000, 1270000), + OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV), /* DSP OPP5 */ - OPP_INITIALIZER("iva", true, 430000000, 1350000), + OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV), }; static struct omap_opp_def __initdata omap36xx_opp_def_list[] = { /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 300000000, 1012500), + OPP_INITIALIZER("mpu", true, 300000000, OMAP3630_VDD_MPU_OPP50_UV), /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 600000000, 1200000), + OPP_INITIALIZER("mpu", true, 600000000, OMAP3630_VDD_MPU_OPP100_UV), /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", false, 800000000, 1325000), + OPP_INITIALIZER("mpu", false, 800000000, OMAP3630_VDD_MPU_OPP120_UV), /* MPU OPP4 - OPP-SB */ - OPP_INITIALIZER("mpu", false, 1000000000, 1375000), + OPP_INITIALIZER("mpu", false, 1000000000, OMAP3630_VDD_MPU_OPP1G_UV), /* L3 OPP1 - OPP50 */ - OPP_INITIALIZER("l3_main", true, 100000000, 1000000), + OPP_INITIALIZER("l3_main", true, 100000000, OMAP3630_VDD_CORE_OPP50_UV), /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */ - OPP_INITIALIZER("l3_main", true, 200000000, 1200000), + OPP_INITIALIZER("l3_main", true, 200000000, OMAP3630_VDD_CORE_OPP100_UV), /* DSP OPP1 - OPP50 */ - OPP_INITIALIZER("iva", true, 260000000, 1012500), + OPP_INITIALIZER("iva", true, 260000000, OMAP3630_VDD_MPU_OPP50_UV), /* DSP OPP2 - OPP100 */ - OPP_INITIALIZER("iva", true, 520000000, 1200000), + OPP_INITIALIZER("iva", true, 520000000, OMAP3630_VDD_MPU_OPP100_UV), /* DSP OPP3 - OPP-Turbo */ - OPP_INITIALIZER("iva", false, 660000000, 1325000), + OPP_INITIALIZER("iva", false, 660000000, OMAP3630_VDD_MPU_OPP120_UV), /* DSP OPP4 - OPP-SB */ - OPP_INITIALIZER("iva", false, 800000000, 1375000), + OPP_INITIALIZER("iva", false, 800000000, OMAP3630_VDD_MPU_OPP1G_UV), }; /** diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index a11fa566d8e..80d08bcd612 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -20,22 +20,23 @@ #include <linux/module.h> #include <plat/cpu.h> +#include <plat/voltage.h> #include "omap_opp_data.h" static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 300000000, 1100000), + OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV), /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 600000000, 1200000), + OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV), /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", false, 800000000, 1260000), + OPP_INITIALIZER("mpu", false, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV), /* MPU OPP4 - OPP-SB */ - OPP_INITIALIZER("mpu", false, 1008000000, 1350000), + OPP_INITIALIZER("mpu", false, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV), /* L3 OPP1 - OPP50 */ - OPP_INITIALIZER("l3_main_1", true, 100000000, 930000), + OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV), /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */ - OPP_INITIALIZER("l3_main_1", true, 200000000, 1100000), + OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4430_VDD_CORE_OPP100_UV), /* TODO: add IVA, DSP, aess, fdif, gpu */ }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index d5a102c7198..1b94ad47b07 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -23,6 +23,9 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "cm2xxx_3xxx.h" +#include "cm-regbits-34xx.h" +#include "prm.h" static struct omap_device_pm_latency *pm_lats; @@ -31,6 +34,8 @@ static struct device *iva_dev; static struct device *l3_dev; static struct device *dsp_dev; +static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk; + struct device *omap2_get_mpuss_device(void) { WARN_ON_ONCE(!mpu_dev); @@ -77,6 +82,55 @@ static int _init_omap_device(char *name, struct device **new_dev) return 0; } +static unsigned long omap3_mpu_get_rate(struct device *dev) +{ + return dpll1_clk->rate; +} + +static int omap3_mpu_set_rate(struct device *dev, unsigned long rate) +{ + int ret; + + ret = clk_set_rate(dpll1_clk, rate); + if (ret) { + dev_warn(dev, "%s: Unable to set rate to %ld\n", + __func__, rate); + return ret; + } + + return 0; +} + +static int omap3_iva_set_rate(struct device *dev, unsigned long rate) +{ + return clk_set_rate(dpll2_clk, rate); +} + +static unsigned long omap3_iva_get_rate(struct device *dev) +{ + return dpll2_clk->rate; +} + +static int omap3_l3_set_rate(struct device *dev, unsigned long rate) +{ + int l3_div; + + l3_div = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL) & + OMAP3430_CLKSEL_L3_MASK; + + return clk_set_rate(dpll3_clk, rate * l3_div); +} + +static unsigned long omap3_l3_get_rate(struct device *dev) +{ + int l3_div; + + l3_div = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL) & + OMAP3430_CLKSEL_L3_MASK; + return dpll3_clk->rate / l3_div; +} + + /* * Build omap_devices for processors and bus. */ @@ -90,6 +144,23 @@ static void omap2_init_processor_devices(void) } else { _init_omap_device("l3_main", &l3_dev); } + + if (cpu_is_omap34xx()) { + dpll1_clk = clk_get(NULL, "dpll1_ck"); + dpll2_clk = clk_get(NULL, "dpll2_ck"); + dpll3_clk = clk_get(NULL, "dpll3_m2_ck"); + + if (mpu_dev) + omap_device_register_dvfs_callbacks(mpu_dev, + omap3_mpu_set_rate, omap3_mpu_get_rate); + if (iva_dev) + omap_device_register_dvfs_callbacks(iva_dev, + omap3_iva_set_rate, omap3_iva_get_rate); + if (l3_dev) + omap_device_register_dvfs_callbacks(l3_dev, + omap3_l3_set_rate, omap3_l3_get_rate); + + } } /* Types of sleep_switch used in omap_set_pwrdm_state */ diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 1c1b0ab5b97..f4a5f716422 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -127,6 +127,7 @@ static inline void omap_enable_smartreflex_on_init(void) {} #ifdef CONFIG_TWL4030_CORE extern int omap3_twl_init(void); extern int omap4_twl_init(void); +extern int omap3_twl_set_sr_bit(bool enable); #else static inline int omap3_twl_init(void) { diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 9e5dc8ed51e..97feb3ab6a6 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void) /* Block console output in case it is on one of the OMAP UARTs */ if (!is_suspending()) - if (try_acquire_console_sem()) + if (!console_trylock()) goto no_sleep; omap_uart_prepare_idle(0); @@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(0); if (!is_suspending()) - release_console_sem(); + console_unlock(); no_sleep: if (omap2_pm_debug) { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8cbbeade4b8..2f864e4b085 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -398,7 +399,7 @@ void omap_sram_idle(void) if (!is_suspending()) if (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON) - if (try_acquire_console_sem()) + if (!console_trylock()) goto console_still_active; /* PER */ @@ -481,7 +482,7 @@ void omap_sram_idle(void) } if (!is_suspending()) - release_console_sem(); + console_unlock(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index d5233890370..cf600e22bf8 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -19,7 +19,6 @@ #include <plat/prcm.h> #include "powerdomain.h" -#include "prm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 302da7403a1..32e91a9c8b6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh->dev_attr = uart; - acquire_console_sem(); /* in case the earlycon is on the UART */ + console_lock(); /* in case the earlycon is on the UART */ /* * Because of early UART probing, UART did not get idled @@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; - release_console_sem(); + console_unlock(); if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae..c37e823266d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 4e48e786bec..7b7c2683ae7 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -42,6 +42,8 @@ #include "timer-gp.h" +#include <plat/common.h> + /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void) /* * When 32k-timer is enabled, don't use GPTimer for clocksource * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in see plat-omap/common.c. + * sync counter. See clocksource setup in plat-omap/counter_32k.c */ -static inline void __init omap2_gp_clocksource_init(void) {} +static void __init omap2_gp_clocksource_init(void) +{ + omap_init_clocksource_32k(); +} + #else /* * clocksource diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c5..f5d591a5088 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -39,123 +39,6 @@ #define VP_TRANXDONE_TIMEOUT 300 #define VOLTAGE_DIR_SIZE 16 -/* Voltage processor register offsets */ -struct vp_reg_offs { - u8 vpconfig; - u8 vstepmin; - u8 vstepmax; - u8 vlimitto; - u8 vstatus; - u8 voltage; -}; - -/* Voltage Processor bit field values, shifts and masks */ -struct vp_reg_val { - /* PRM module */ - u16 prm_mod; - /* VPx_VPCONFIG */ - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u32 vpconfig_errorgain_mask; - u8 vpconfig_errorgain_shift; - u32 vpconfig_initvoltage_mask; - u8 vpconfig_initvoltage_shift; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - /* VPx_VSTEPMIN */ - u8 vstepmin_stepmin; - u16 vstepmin_smpswaittimemin; - u8 vstepmin_stepmin_shift; - u8 vstepmin_smpswaittimemin_shift; - /* VPx_VSTEPMAX */ - u8 vstepmax_stepmax; - u16 vstepmax_smpswaittimemax; - u8 vstepmax_stepmax_shift; - u8 vstepmax_smpswaittimemax_shift; - /* VPx_VLIMITTO */ - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; - u16 vlimitto_timeout; - u8 vlimitto_vddmin_shift; - u8 vlimitto_vddmax_shift; - u8 vlimitto_timeout_shift; - /* PRM_IRQSTATUS*/ - u32 tranxdone_status; -}; - -/* Voltage controller registers and offsets */ -struct vc_reg_info { - /* PRM module */ - u16 prm_mod; - /* VC register offsets */ - u8 smps_sa_reg; - u8 smps_volra_reg; - u8 bypass_val_reg; - u8 cmdval_reg; - u8 voltsetup_reg; - /*VC_SMPS_SA*/ - u8 smps_sa_shift; - u32 smps_sa_mask; - /* VC_SMPS_VOL_RA */ - u8 smps_volra_shift; - u32 smps_volra_mask; - /* VC_BYPASS_VAL */ - u8 data_shift; - u8 slaveaddr_shift; - u8 regaddr_shift; - u32 valid; - /* VC_CMD_VAL */ - u8 cmd_on_shift; - u8 cmd_onlp_shift; - u8 cmd_ret_shift; - u8 cmd_off_shift; - u32 cmd_on_mask; - /* PRM_VOLTSETUP */ - u8 voltsetup_shift; - u32 voltsetup_mask; -}; - -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. - * @vp_offs : structure containing the offsets for various - * vp registers - * @vp_reg : the register values, shifts, masks for various - * vp registers - * @vc_reg : structure containing various various vc registers, - * shifts, masks etc. - * @voltdm : pointer to the voltage domain structure - * @debug_dir : debug directory for this voltage domain. - * @curr_volt : current voltage for this vdd. - * @ocp_mod : The prm module for accessing the prm irqstatus reg. - * @prm_irqst_reg : prm irqstatus register. - * @vp_enabled : flag to keep track of whether vp is enabled or not - * @volt_scale : API to scale the voltage of the vdd. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; - struct vp_reg_offs vp_offs; - struct vp_reg_val vp_reg; - struct vc_reg_info vc_reg; - struct voltagedomain voltdm; - struct dentry *debug_dir; - u32 curr_volt; - u16 ocp_mod; - u8 prm_irqst_reg; - bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, - unsigned long target_volt); -}; - static struct omap_vdd_info *vdd_info; /* * Number of scalable voltage domains. @@ -308,6 +191,39 @@ static struct omap_volt_data omap44xx_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(0, 0, 0, 0), }; +/* OMAP 3430 MPU Core VDD dependency table */ +static struct omap_vdd_dep_volt omap34xx_vdd1_vdd2_data[] = { + {.main_vdd_volt = OMAP3430_VDD_MPU_OPP1_UV, .dep_vdd_volt = OMAP3430_VDD_CORE_OPP2_UV}, + {.main_vdd_volt = OMAP3430_VDD_MPU_OPP2_UV, .dep_vdd_volt = OMAP3430_VDD_CORE_OPP2_UV}, + {.main_vdd_volt = OMAP3430_VDD_MPU_OPP3_UV, .dep_vdd_volt = OMAP3430_VDD_CORE_OPP3_UV}, + {.main_vdd_volt = OMAP3430_VDD_MPU_OPP4_UV, .dep_vdd_volt = OMAP3430_VDD_CORE_OPP3_UV}, + {.main_vdd_volt = OMAP3430_VDD_MPU_OPP5_UV, .dep_vdd_volt = OMAP3430_VDD_CORE_OPP3_UV}, + {.main_vdd_volt = 0, .dep_vdd_volt = 0}, +}; + +static struct omap_vdd_dep_info omap34xx_vdd1_dep_info[] = { + { + .name = "core", + .dep_table = omap34xx_vdd1_vdd2_data, + }, +}; + +/* OMAP 3630 MPU Core VDD dependency table */ +static struct omap_vdd_dep_volt omap36xx_vdd1_vdd2_data[] = { + {.main_vdd_volt = OMAP3630_VDD_MPU_OPP50_UV, .dep_vdd_volt = OMAP3630_VDD_CORE_OPP50_UV}, + {.main_vdd_volt = OMAP3630_VDD_MPU_OPP100_UV, .dep_vdd_volt = OMAP3630_VDD_CORE_OPP100_UV}, + {.main_vdd_volt = OMAP3630_VDD_MPU_OPP120_UV, .dep_vdd_volt = OMAP3630_VDD_CORE_OPP100_UV}, + {.main_vdd_volt = OMAP3630_VDD_MPU_OPP1G_UV, .dep_vdd_volt = OMAP3630_VDD_CORE_OPP100_UV}, + {.main_vdd_volt = 0, .dep_vdd_volt = 0}, +}; + +static struct omap_vdd_dep_info omap36xx_vdd1_dep_info[] = { + { + .name = "core", + .dep_table = omap36xx_vdd1_vdd2_data, + }, +}; + static struct dentry *voltage_dir; /* Init function pointers */ @@ -471,6 +387,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); @@ -813,10 +730,15 @@ static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd) } if (!strcmp(vdd->voltdm.name, "mpu")) { - if (cpu_is_omap3630()) + if (cpu_is_omap3630()) { vdd->volt_data = omap36xx_vddmpu_volt_data; - else + vdd->dep_vdd_info = omap36xx_vdd1_dep_info; + vdd->nr_dep_vdd = ARRAY_SIZE(omap36xx_vdd1_dep_info); + } else { vdd->volt_data = omap34xx_vddmpu_volt_data; + vdd->dep_vdd_info = omap34xx_vdd1_dep_info; + vdd->nr_dep_vdd = ARRAY_SIZE(omap34xx_vdd1_dep_info); + } vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK; vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET; diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h index 52a2955d0f8..6769917882f 100644 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ b/arch/arm/mach-orion5x/include/mach/memory.h @@ -7,6 +7,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h index 0e877008105..1275db61cee 100644 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ b/arch/arm/mach-pnx4008/include/mach/memory.h @@ -16,6 +16,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a134a1413e0..e194d928cda 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -829,5 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3") .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800a113..28f667e52ef 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void) GPIO0_COLIBRI_PXA270_SD_DETECT; if (machine_is_colibri300()) /* PXA300 Colibri */ colibri_mci_platform_data.gpio_card_detect = - GPIO39_COLIBRI_PXA300_SD_DETECT; + GPIO13_COLIBRI_PXA300_SD_DETECT; else /* PXA320 Colibri */ colibri_mci_platform_data.gpio_card_detect = GPIO28_COLIBRI_PXA320_SD_DETECT; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d07eb..66dd81cbc8a 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = { GPIO4_MMC1_DAT1, GPIO5_MMC1_DAT2, GPIO6_MMC1_DAT3, - GPIO39_GPIO, /* SD detect */ + GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */ /* UHC */ GPIO0_2_USBH_PEN, diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f1ef9..cb4236e98a0 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} #define GPIO113_COLIBRI_PXA270_TS_IRQ 113 /* GPIO definitions for Colibri PXA300/310 */ -#define GPIO39_COLIBRI_PXA300_SD_DETECT 39 +#define GPIO13_COLIBRI_PXA300_SD_DETECT 13 /* GPIO definitions for Colibri PXA320 */ #define GPIO28_COLIBRI_PXA320_SD_DETECT 28 diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 92361a66b22..7f68724dcc2 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -15,7 +15,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xa0000000) +#define PLAT_PHYS_OFFSET UL(0xa0000000) #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 405b92a2979..35572c427fa 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = { .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500, + .pwm_period_ns = 3500 * 1024, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b28954..1807c9abdde 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state) #endif /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) @@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state) pxa_cpu_pm_fns->enter(state); cpu_init(); - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 5dafc157b27..e05fc2c4c08 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -24,9 +24,9 @@ * Physical DRAM offset. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET -#define PHYS_OFFSET UL(0x70000000) +#define PLAT_PHYS_OFFSET UL(0x70000000) #else -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 6ef5c5e528b..8ede983b861 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -484,7 +484,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index cbdc97a5685..9f26369555c 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -379,7 +379,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8e8ab7d29a6..dea06b2da3a 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -381,7 +381,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 841118e3e11..7d0f1734a21 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -331,7 +331,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 02b755b009d..b89e28f8853 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -414,7 +414,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h index 78191bf2519..18a221093bf 100644 --- a/arch/arm/mach-rpc/include/mach/memory.h +++ b/arch/arm/mach-rpc/include/mach/memory.h @@ -21,7 +21,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) /* * Cache flushing area - ROM diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h index cf5901ffd38..3f33670dd01 100644 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ b/arch/arm/mach-s3c2400/include/mach/memory.h @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x0C000000) +#define PLAT_PHYS_OFFSET UL(0x0C000000) #endif diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h index 6f1e5871ae4..f92b97b89c0 100644 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ b/arch/arm/mach-s3c2410/include/mach/memory.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x30000000) +#define PLAT_PHYS_OFFSET UL(0x30000000) #endif diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h index 7d74fd5c8d6..7d208a71b17 100644 --- a/arch/arm/mach-s3c24a0/include/mach/memory.h +++ b/arch/arm/mach-s3c24a0/include/mach/memory.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_24A0_MEMORY_H #define __ASM_ARCH_24A0_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h index 42cc54e2ee3..4760cdae1eb 100644 --- a/arch/arm/mach-s3c64xx/include/mach/memory.h +++ b/arch/arm/mach-s3c64xx/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x50000000) +#define PLAT_PHYS_OFFSET UL(0x50000000) #define CONSISTENT_DMA_SIZE SZ_8M diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h index 9ddd877ba2e..cfe259dded3 100644 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ b/arch/arm/mach-s5p6442/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h index 1b036b0a24c..365a6eb4b88 100644 --- a/arch/arm/mach-s5p64x0/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h index 4b60d18179f..bda4e79fd5f 100644 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ b/arch/arm/mach-s5pc100/include/mach/memory.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #endif diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index d503e0c4ce4..7b5fcf0da0c 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) /* diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index d4d222b716b..27376223ea9 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -65,7 +65,7 @@ resume_with_mmu: /* * After MMU is turned on, restore the previous MMU table. */ - ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + ldr r9 , =(PAGE_OFFSET - PLAT_PHYS_OFFSET) add r4, r4, r9 str r12, [r4] diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 09c4c21b70c..b2a9acc5185 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -122,6 +122,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5PV310_DEV_PD + select S5PV310_DEV_SYSMMU select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 74d400625a2..3060f78e12a 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -124,8 +124,6 @@ #define S5PV310_PA_SYSMMU_TV 0x12E20000 #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM /* compatibiltiy defines. */ #define S3C_PA_UART S5PV310_PA_UART diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h index 1dffb482324..470b01bf861 100644 --- a/arch/arm/mach-s5pv310/include/mach/memory.h +++ b/arch/arm/mach-s5pv310/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) /* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h index 662fe85ff4d..598fc5c9211 100644 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h @@ -13,6 +13,9 @@ #ifndef __ASM_ARM_ARCH_SYSMMU_H #define __ASM_ARM_ARCH_SYSMMU_H __FILE__ +#define S5PV310_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM + enum s5pv310_sysmmu_ips { SYSMMU_MDMA, SYSMMU_SSS, @@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips { SYSMMU_MFC_R, }; -static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = { +static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { "SYSMMU_MDMA" , "SYSMMU_SSS" , "SYSMMU_FIMC0" , diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index d43c5ef58eb..bd3e1bfdd6a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = { struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, + .dev = { + .platform_data = &locomo_info, + }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index 128a1dfa96b..a44da6a2916 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset is 0xc0000000 on the SA1100 */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index d9c4812f1c3..9afb1700000 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -15,7 +15,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x08000000) +#define PLAT_PHYS_OFFSET UL(0x08000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4d1b4c5c938..0c8f6cf3e94 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -60,6 +60,8 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" + select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI depends on ARCH_SH73A0 config MACH_MACKEREL diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c18a740a415..2123b96b563 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,9 +34,10 @@ #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> - +#include <linux/sh_clk.h> +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> - #include <mach/hardware.h> #include <mach/sh73a0.h> #include <mach/common.h> @@ -183,11 +184,165 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(95), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .id = 0, + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + +static unsigned char lcd_backlight_seq[3][2] = { + { 0x04, 0x07 }, + { 0x23, 0x80 }, + { 0x03, 0x01 }, +}; + +static void lcd_backlight_on(void) +{ + struct i2c_adapter *a; + struct i2c_msg msg; + int k; + + a = i2c_get_adapter(1); + for (k = 0; a && k < 3; k++) { + msg.addr = 0x6d; + msg.buf = &lcd_backlight_seq[k][0]; + msg.len = 2; + msg.flags = 0; + if (i2c_transfer(a, &msg, 1) != 1) + break; + } +} + +static void lcd_backlight_reset(void) +{ + gpio_set_value(GPIO_PORT235, 0); + mdelay(24); + gpio_set_value(GPIO_PORT235, 1); +} + +static void lcd_on(void *board_data, struct fb_info *info) +{ + lcd_backlight_on(); +} + +static void lcd_off(void *board_data) +{ + lcd_backlight_reset(); +} + +/* LCDC0 */ +static const struct fb_videomode lcdc0_modes[] = { + { + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, +}; + +static struct sh_mobile_lcdc_info lcdc0_info = { + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_size_cfg.width = 44, + .lcd_size_cfg.height = 79, + .bpp = 16, + .lcd_cfg = lcdc0_modes, + .num_cfg = ARRAY_SIZE(lcdc0_modes), + .board_cfg = { + .display_on = lcd_on, + .display_off = lcd_off, + }, + } +}; + +static struct resource lcdc0_resources[] = { + [0] = { + .name = "LCDC0", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc0_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc0_resources), + .resource = lcdc0_resources, + .id = 0, + .dev = { + .platform_data = &lcdc0_info, + .coherent_dma_mask = ~0, + }, +}; + +/* MIPI-DSI */ +static struct resource mipidsi0_resources[] = { + [0] = { + .start = 0xfeab0000, + .end = 0xfeab3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xfeab4000, + .end = 0xfeab7fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .lcd_chan = &lcdc0_info.ch[0], + .vsynw_offset = 20, + .clksrc = 1, + .flags = SH_MIPI_DSI_HSABM, +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + static struct platform_device *ag5evm_devices[] __initdata = { ð_device, &keysc_device, &fsi_device, &mmc_device, + &irda_device, + &lcdc0_device, + &mipidsi0_device, }; static struct map_desc ag5evm_io_desc[] __initdata = { @@ -224,6 +379,8 @@ void __init ag5evm_init_irq(void) __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A); } +#define DSI0PHYCR 0xe615006c + static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -287,6 +444,25 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* IrDA */ + gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL); + gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL); + gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); + + /* LCD panel */ + gpio_request(GPIO_PORT217, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT217, 0); + mdelay(1); + gpio_set_value(GPIO_PORT217, 1); + + /* LCD backlight controller */ + gpio_request(GPIO_PORT235, NULL); /* RESET */ + gpio_direction_output(GPIO_PORT235, 0); + lcd_backlight_reset(); + + /* MIPI-DSI clock setup */ + __raw_writel(0x2a809010, DSI0PHYCR); + #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 686b304a770..ef4613b993a 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -347,7 +347,6 @@ static void __init g3evm_init(void) gpio_request(GPIO_FN_IRDA_OUT, NULL); gpio_request(GPIO_FN_IRDA_IN, NULL); gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW); sh7367_add_standard_devices(); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b15d21f0f6..fb4213a4e15 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -169,9 +169,8 @@ * SW1 | SW33 * | bit1 | bit2 | bit3 | bit4 * -------------+------+------+------+------- - * MMC0 OFF | OFF | ON | ON | X - * MMC1 ON | OFF | ON | X | ON - * SDHI1 OFF | ON | X | OFF | ON + * MMC0 OFF | OFF | X | ON | X (Use MMCIF) + * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) * */ diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 9aa8d68d1a9..e9731b5a73e 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -234,7 +234,9 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate) value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); + __raw_writel(value | ((idx + 19) << 24), PLLC2CR); + + clk->rate = clk->freq_table[idx].frequency; return 0; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 720a71433be..ddd4a1b775f 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -118,8 +118,16 @@ static unsigned long pll_recalc(struct clk *clk) { unsigned long mult = 1; - if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) + if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) { mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1); + /* handle CFG bit for PLL1 and PLL2 */ + switch (clk->enable_bit) { + case 1: + case 2: + if (__raw_readl(clk->enable_reg) & (1 << 20)) + mult *= 2; + } + } return clk->parent->rate * mult; } @@ -212,7 +220,7 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT), - [DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), + [DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0), @@ -255,10 +263,10 @@ static struct clk div6_clks[DIV6_NR] = { }; enum { MSTP001, - MSTP125, MSTP116, + MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP323, MSTP312, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP312, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -268,7 +276,9 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */ [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ + [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */ [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ @@ -279,6 +289,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ @@ -288,16 +299,25 @@ static struct clk mstp_clks[MSTP_NR] = { #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } +#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), + /* DIV6 clocks */ + CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), + CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), + CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ + CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ + CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ @@ -308,6 +328,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h index 377584e57e0..ad00c3c258f 100644 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MEMORY_H #define __ASM_MACH_MEMORY_H -#define PHYS_OFFSET UL(CONFIG_MEMORY_START) +#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START) #define MEM_SIZE UL(CONFIG_MEMORY_SIZE) /* DMA memory at 0xf6000000 - 0xffdfffff */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index f78a1ead71a..ca5f9d17b39 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -365,6 +365,7 @@ static struct intc_desc intca_desc __initdata = { enum { UNUSED_INTCS = 0, + ENABLED_INTCS, INTCS, @@ -413,7 +414,7 @@ enum { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, - /* MFIS2 */ + MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */ CPORTS2R, /* CEC */ JPU6E, @@ -477,7 +478,7 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(CMT4, 0x1980), INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), - /* MFIS2 */ + INTCS_VECT(MFIS2_INTCS, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20), /* CEC */ INTCS_VECT(JPU6E, 0x1a80), @@ -543,7 +544,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ - { 0, CPORTS2R, 0, 0, + { MFIS2_INTCS, CPORTS2R, 0, 0, JPU6E, 0, 0, 0 } }, { 0xffd20104, 0, 16, /* INTAMASK */ { 0, 0, 0, 0, 0, 0, 0, 0, @@ -571,7 +572,8 @@ static struct intc_prio_reg intcs_prio_registers[] = { { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, - { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } }, + { 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R, + 0, 0 } }, { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } }, }; @@ -590,6 +592,7 @@ static struct resource intcs_resources[] __initdata = { static struct intc_desc intcs_desc __initdata = { .name = "sh7372-intcs", + .force_enable = ENABLED_INTCS, .resource = intcs_resources, .num_resources = ARRAY_SIZE(intcs_resources), .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 322d8d57cbc..5d0e1503ece 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -252,10 +252,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) void __init sh73a0_init_irq(void) { - void __iomem *gic_base = __io(0xf0001000); + void __iomem *gic_dist_base = __io(0xf0001000); + void __iomem *gic_cpu_base = __io(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - gic_init(0, 29, gic_base, gic_base); + gic_init(0, 29, gic_dist_base, gic_cpu_base); register_intc_controller(&intcs_desc); diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index cacf17a958c..53677e464d4 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -62,7 +62,7 @@ #define SPEAR320_SMII1_BASE 0xAB000000 #define SPEAR320_SMII1_SIZE 0x01000000 -#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_BASE 0xB3000000 #define SPEAR320_SOC_CONFIG_SIZE 0x00000070 /* Interrupt registers offsets and masks */ #define INT_STS_MASK_REG 0x04 diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c index 7991415e666..fb6426ddeb7 100644 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -54,7 +54,7 @@ static void __init tcc8k_map_io(void) } MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .map_io = tcc8k_map_io, .init_irq = tcc8k_init_irq, .init_machine = tcc8k_init, diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index bd066206e11..ad804880151 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -207,9 +207,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) spin_unlock_irqrestore(&bank->lvl_lock[port], flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(irq, handle_level_irq); + __set_irq_handler_unlocked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(irq, handle_edge_irq); + __set_irq_handler_unlocked(d->irq, handle_edge_irq); return 0; } diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index d7723955dac..a217f68ba57 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLK_H #define __MACH_CLK_H +struct clk; + void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h index 412f5c63e65..66cd3f4fc89 100644 --- a/arch/arm/mach-tegra/include/mach/clkdev.h +++ b/arch/arm/mach-tegra/include/mach/clkdev.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLKDEV_H #define __MACH_CLKDEV_H +struct clk; + static inline int __clk_get(struct clk *clk) { return 1; diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h new file mode 100644 index 00000000000..66ad2760c62 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -0,0 +1,61 @@ +/* + * Platform definitions for tegra-kbc keyboard input driver + * + * Copyright (c) 2010-2011, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_TEGRA_KBC_H +#define ASMARM_ARCH_TEGRA_KBC_H + +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +#define KBC_MAX_GPIO 24 +#define KBC_MAX_KPENT 8 +#else +#define KBC_MAX_GPIO 20 +#define KBC_MAX_KPENT 7 +#endif + +#define KBC_MAX_ROW 16 +#define KBC_MAX_COL 8 +#define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL) + +struct tegra_kbc_pin_cfg { + bool is_row; + unsigned char num; +}; + +struct tegra_kbc_wake_key { + u8 row:4; + u8 col:4; +}; + +struct tegra_kbc_platform_data { + unsigned int debounce_cnt; + unsigned int repeat_cnt; + + unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */ + const struct tegra_kbc_wake_key *wake_cfg; + + struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; + const struct matrix_keymap_data *keymap_data; + + bool wakeup; +}; +#endif diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h index 6151bab62af..537db3aa81a 100644 --- a/arch/arm/mach-tegra/include/mach/memory.h +++ b/arch/arm/mach-tegra/include/mach/memory.h @@ -22,7 +22,7 @@ #define __MACH_TEGRA_MEMORY_H /* physical offset of RAM */ -#define PHYS_OFFSET UL(0) +#define PLAT_PHYS_OFFSET UL(0) #endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index de7dfad6f76..17c74d21077 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -46,24 +46,24 @@ #define ICTLR_COP_IER_CLR 0x38 #define ICTLR_COP_IEP_CLASS 0x3c -static void (*gic_mask_irq)(struct irq_data *d); -static void (*gic_unmask_irq)(struct irq_data *d); +static void (*tegra_gic_mask_irq)(struct irq_data *d); +static void (*tegra_gic_unmask_irq)(struct irq_data *d); -#define irq_to_ictlr(irq) (((irq)-32) >> 5) +#define irq_to_ictlr(irq) (((irq) - 32) >> 5) static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE); -#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100) +#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr) * 0x100) static void tegra_mask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_mask_irq(d); - writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_CLR); + tegra_gic_mask_irq(d); + writel(1 << (d->irq & 31), addr+ICTLR_CPU_IER_CLR); } static void tegra_unmask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_unmask_irq(d); + tegra_gic_unmask_irq(d); writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_SET); } @@ -98,8 +98,8 @@ void __init tegra_init_irq(void) IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); gic = get_irq_chip(29); - gic_unmask_irq = gic->irq_unmask; - gic_mask_irq = gic->irq_mask; + tegra_gic_unmask_irq = gic->irq_unmask; + tegra_gic_mask_irq = gic->irq_mask; tegra_irq.irq_ack = gic->irq_ack; #ifdef CONFIG_SMP tegra_irq.irq_set_affinity = gic->irq_set_affinity; diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index bf134bcc129..888e2e351ee 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -15,17 +15,17 @@ #ifdef CONFIG_MACH_U300_DUAL_RAM -#define PHYS_OFFSET UL(0x48000000) +#define PLAT_PHYS_OFFSET UL(0x48000000) #define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) #else #ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX -#define PHYS_OFFSET (0x28000000 + \ +#define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) #else -#define PHYS_OFFSET (0x28000000 + \ +#define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) #endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 07c35a84642..48b3b7f3996 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -19,9 +19,9 @@ #include <linux/io.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/memory.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/memory.h> static void __init u300_reserve(void) { diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 4b996676594..4ba3d930a06 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -106,8 +106,8 @@ void mop500_sdi_tc35892_init(void) if (ret) return; - gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1); - gpio_direction_output(GPIO_SDMMC_EN, 0); + gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 0); + gpio_direction_output(GPIO_SDMMC_EN, 1); db8500_add_sdi0(&mop500_sdi0_data); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a393f57ed2a..9119565f159 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -224,3 +224,13 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .timer = &ux500_timer, .init_machine = u8500_init_machine, MACHINE_END + +MACHINE_START(NOMADIK, "ST-Ericsson MOP500 platform") + /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = u8500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index b2b0a3b9be8..9a0a6ed9cd5 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -313,7 +313,7 @@ static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); -static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000); static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 1748fbc5853..5c0fabf5fa0 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,22 +12,20 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/io.h> #include <asm/mach/map.h> +#include <asm/pmu.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include "devices-db8500.h" -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, -}; - /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), @@ -89,6 +87,51 @@ void __init u8500_map_io(void) iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); } +static struct resource db8500_pmu_resources[] = { + [0] = { + .start = IRQ_DB8500_PMU, + .end = IRQ_DB8500_PMU, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * The PMU IRQ lines of two cores are wired together into a single interrupt. + * Bounce the interrupt to the other core if it's not ours. + */ +static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) +{ + irqreturn_t ret = handler(irq, dev); + int other = !smp_processor_id(); + + if (ret == IRQ_NONE && cpu_online(other)) + irq_set_affinity(irq, cpumask_of(other)); + + /* + * We should be able to get away with the amount of IRQ_NONEs we give, + * while still having the spurious IRQ detection code kick in if the + * interrupt really starts hitting spuriously. + */ + return ret; +} + +static struct arm_pmu_platdata db8500_pmu_platdata = { + .handle_irq = db8500_pmu_handler, +}; + +static struct platform_device db8500_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(db8500_pmu_resources), + .resource = db8500_pmu_resources, + .dev.platform_data = &db8500_pmu_platdata, +}; + +static struct platform_device *platform_devs[] __initdata = { + &u8500_dma40_device, + &db8500_pmu_device, +}; + static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h index 510571a59e2..2ef697a6700 100644 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ b/arch/arm/mach-ux500/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define BUS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h index 79aeab86b90..dacc9d8e4e6 100644 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ b/arch/arm/mach-versatile/include/mach/memory.h @@ -23,6 +23,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 3f19b660a16..931148487f0 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,5 +5,8 @@ config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" select CPU_V7 select ARM_GIC + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select ARM_ERRATA_753970 endmenu diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e628402b754..e9bccc5230c 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -243,7 +243,7 @@ static void __init ct_ca9x4_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, .init_irq = ct_ca9x4_init_irq, #if 0 diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h index be28232ae63..5b7fcd439d8 100644 --- a/arch/arm/mach-vexpress/include/mach/memory.h +++ b/arch/arm/mach-vexpress/include/mach/memory.h @@ -20,6 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x60000000) +#define PLAT_PHYS_OFFSET UL(0x60000000) #endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index a9ed3428a2f..1edae65a0e7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -19,6 +19,7 @@ #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> +#include <asm/hardware/sp810.h> #include <mach/motherboard.h> @@ -50,8 +51,16 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) static void __init v2m_timer_init(void) { + u32 scctrl; + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); + /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ + scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); + scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; + scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; + writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL)); + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h index 971b80702c2..f02905ba774 100644 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ b/arch/arm/mach-w90x900/include/mach/memory.h @@ -18,6 +18,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 808b8329b13..070f1d9fdc3 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -652,7 +652,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 + depends on !CPU_USE_DOMAINS && CPU_V7 select HAVE_PROC_CPU if PROC_FS default y if SMP help diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 170c9bb9586..f2ce38e085d 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -49,7 +49,13 @@ static inline void cache_wait(void __iomem *reg, unsigned long mask) static inline void cache_sync(void) { void __iomem *base = l2x0_base; + +#ifdef CONFIG_ARM_ERRATA_753970 + /* write to an unmmapped register */ + writel_relaxed(0, base + L2X0_DUMMY_REG); +#else writel_relaxed(0, base + L2X0_CACHE_SYNC); +#endif cache_wait(base + L2X0_CACHE_SYNC, 1); } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5164069ced4..cddd684364d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) memblock_reserve(__pa(_stext), _end - _stext); #endif #ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size && + memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } if (phys_initrd_size) { memblock_reserve(phys_initrd_start, phys_initrd_size); diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0c1172b56b4..8e335623913 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -264,6 +264,12 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_751472 + cmp r6, #0x30 @ present prior to r3p0 + mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrlt r10, r10, #1 << 11 @ set bit #11 + mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..c074e66ad22 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include <linux/cpumask.h> -#include <linux/err.h> -#include <linux/errno.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/oprofile.h> @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail) /* frame pointers should strictly progress back up the stack * (towards higher addresses) */ - if (tail >= buftail[0].fp) + if (tail + 1 >= buftail[0].fp) return NULL; return buftail[0].fp-1; @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 389f2179501..a97f7334bc7 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -119,4 +119,10 @@ config IRAM_ALLOC bool select GENERIC_ALLOCATOR +config CLK_DEBUG + bool "clock debug information export to user space" + depends on PM_DEBUG && DEBUG_FS + default n + help + export clk debug information to user space endif diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 2ed3ab173ad..190bce1221a 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -37,6 +37,8 @@ #include <linux/proc_fs.h> #include <linux/semaphore.h> #include <linux/string.h> +#include <linux/slab.h> +#include <linux/debugfs.h> #include <mach/clock.h> #include <mach/hardware.h> @@ -244,3 +246,122 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) return ll; } + +#ifdef CONFIG_CLK_DEBUG +/* + * debugfs support to trace clock tree hierarchy and attributes + */ +static int clk_debug_rate_get(void *data, u64 *val) +{ + struct clk *clk = data; + + *val = (u64)clk_get_rate(clk); + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(clk_debug_rate_fops, clk_debug_rate_get, NULL, + "%llu\n"); + + +static struct dentry *clk_root; +static int clk_debug_register_one(struct clk *clk) +{ + int err; + struct dentry *d, *child, *child_tmp; + struct clk *pa = clk_get_parent(clk); + + if (pa && !IS_ERR(pa)) + d = debugfs_create_dir(clk->name, pa->dentry); + else { + if (!clk_root) + clk_root = debugfs_create_dir("clock", NULL); + if (!clk_root) + return -ENOMEM; + d = debugfs_create_dir(clk->name, clk_root); + } + + if (!d) + return -ENOMEM; + + clk->dentry = d; + + d = debugfs_create_u32("enable_count", S_IRUGO, clk->dentry, + (u32 *)&clk->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + + d = debugfs_create_file("rate", S_IRUGO, clk->dentry, (void *)clk, + &clk_debug_rate_fops); + if (!d) { + err = -ENOMEM; + goto err_out; + } + + return 0; + +err_out: + d = clk->dentry; + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) + debugfs_remove(child); + debugfs_remove(clk->dentry); + return err; +} + +struct preinit_clk { + struct list_head list; + struct clk *clk; +}; +static LIST_HEAD(preinit_clks); +static DEFINE_MUTEX(preinit_lock); +static int init_done; + +void clk_debug_register(struct clk *clk) +{ + int err; + struct clk *pa; + + if (init_done) { + pa = clk_get_parent(clk); + + if (pa && !IS_ERR(pa) && !pa->dentry) + clk_debug_register(pa); + + if (!clk->dentry) { + err = clk_debug_register_one(clk); + if (err) + return; + } + } else { + struct preinit_clk *p; + mutex_lock(&preinit_lock); + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p) { + p->clk = clk; + list_add(&p->list, &preinit_clks); + } + mutex_unlock(&preinit_lock); + } +} +EXPORT_SYMBOL_GPL(clk_debug_register); + +static int __init clk_debugfs_init(void) +{ + struct preinit_clk *pclk, *tmp; + + init_done = 1; + + mutex_lock(&preinit_lock); + list_for_each_entry(pclk, &preinit_clks, list) { + clk_debug_register(pclk->clk); + } + + list_for_each_entry_safe(pclk, tmp, &preinit_clks, list) { + list_del(&pclk->list); + kfree(pclk); + } + mutex_unlock(&preinit_lock); + return 0; +} +late_initcall(clk_debugfs_init); +#endif diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h index 753a5988d85..fb0e0bd3f51 100644 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ b/arch/arm/plat-mxc/include/mach/clock.h @@ -23,9 +23,14 @@ #ifndef __ASSEMBLY__ #include <linux/list.h> +#define CLK_NAME_LEN 32 struct module; struct clk { +#ifdef CONFIG_CLK_DEBUG + char name[CLK_NAME_LEN]; + struct dentry *dentry; +#endif int id; /* Source clock this clk depends on */ struct clk *parent; @@ -62,5 +67,11 @@ void clk_unregister(struct clk *clk); unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref); +#ifdef CONFIG_CLK_DEBUG +void clk_debug_register(struct clk *clk); +#else +static inline void clk_debug_register(struct clk *clk) {} +#endif + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 83861408133..5d51cbb9889 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -23,23 +23,23 @@ #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) # if defined CONFIG_ARCH_MX1 -# define PHYS_OFFSET MX1_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET # elif defined CONFIG_MACH_MX21 -# define PHYS_OFFSET MX21_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET # elif defined CONFIG_ARCH_MX25 -# define PHYS_OFFSET MX25_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET # elif defined CONFIG_MACH_MX27 -# define PHYS_OFFSET MX27_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET # elif defined CONFIG_ARCH_MX3 -# define PHYS_OFFSET MX3x_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET # elif defined CONFIG_ARCH_MXC91231 -# define PHYS_OFFSET MXC91231_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET # elif defined CONFIG_ARCH_MX50 -# define PHYS_OFFSET MX50_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET # elif defined CONFIG_ARCH_MX51 -# define PHYS_OFFSET MX51_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET # elif defined CONFIG_ARCH_MX53 -# define PHYS_OFFSET MX53_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET # endif #endif diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..ff469c4f1d7 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 18fe3cb195d..b6333ae3f92 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG config OMAP_IOMMU_IVA2 bool -choice - prompt "System timer" - default OMAP_32K_TIMER if !ARCH_OMAP15XX - config OMAP_MPU_TIMER bool "Use mpu timer" + depends on ARCH_OMAP1 help Select this option if you want to use the OMAP mpu timer. This timer provides more intra-tick resolution than the 32KHz timer, @@ -158,6 +155,7 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS + default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS) help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has @@ -165,8 +163,6 @@ config OMAP_32K_TIMER intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is currently only available for OMAP16XX, 24XX, 34XX and OMAP4. -endchoice - config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" depends on ARCH_OMAP3 && PM diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index ea4644021fb..862dda95d61 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -36,8 +36,6 @@ #define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) - #include <linux/clocksource.h> /* @@ -122,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd); #define SC_MULT 4000000000u #define SC_SHIFT 17 -unsigned long long notrace sched_clock(void) +static inline unsigned long long notrace _omap_32k_sched_clock(void) { u32 cyc = clocksource_32k.read(&clocksource_32k); return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); } +#ifndef CONFIG_OMAP_MPU_TIMER +unsigned long long notrace sched_clock(void) +{ + return _omap_32k_sched_clock(); +} +#else +unsigned long long notrace omap_32k_sched_clock(void) +{ + return _omap_32k_sched_clock(); +} +#endif + static void notrace omap_update_sched_clock(void) { u32 cyc = clocksource_32k.read(&clocksource_32k); @@ -160,7 +170,7 @@ void read_persistent_clock(struct timespec *ts) *ts = *tsp; } -static int __init omap_init_clocksource_32k(void) +int __init omap_init_clocksource_32k(void) { static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; @@ -195,7 +205,3 @@ static int __init omap_init_clocksource_32k(void) } return 0; } -arch_initcall(omap_init_clocksource_32k); - -#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ - diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 11c54ec8d47..73452c700da 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -8,6 +8,10 @@ * * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Updated to support OMAP3 + * Rajendra Nayak <rnayak@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -21,10 +25,18 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/opp.h> #include <mach/hardware.h> #include <plat/clock.h> #include <asm/system.h> +#include <asm/cpu.h> + +#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) +#include <plat/omap-pm.h> +#include <plat/common.h> +#include <plat/dvfs.h> +#endif #define VERY_HI_RATE 900000000 @@ -32,6 +44,8 @@ static struct cpufreq_frequency_table *freq_table; #ifdef CONFIG_ARCH_OMAP1 #define MPU_CLK "mpu" +#elif defined(CONFIG_ARCH_OMAP3) +#define MPU_CLK "arm_fck" #else #define MPU_CLK "virt_prcm_set" #endif @@ -74,6 +88,12 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int relation) { struct cpufreq_freqs freqs; +#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) + unsigned long freq; + int i; + struct cpufreq_freqs freqs_notify; + struct device *mpu_dev = omap2_get_mpuss_device(); +#endif int ret = 0; /* Ensure desired rate is within allowed range. Some govenors @@ -83,13 +103,13 @@ static int omap_target(struct cpufreq_policy *policy, if (target_freq > policy->max) target_freq = policy->max; +#ifdef CONFIG_ARCH_OMAP1 freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; freqs.cpu = 0; if (freqs.old == freqs.new) return ret; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); #ifdef CONFIG_CPU_FREQ_DEBUG printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n", @@ -97,7 +117,39 @@ static int omap_target(struct cpufreq_policy *policy, #endif ret = clk_set_rate(mpu_clk, freqs.new * 1000); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) + freqs.old = omap_getspeed(policy->cpu);; + freqs_notify.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; + freqs.cpu = policy->cpu; + if (freqs.old == freqs.new) + return ret; + + /* pre notifiers */ + for_each_cpu(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + /* scale the frequency */ + freq = target_freq * 1000; + if (opp_find_freq_ceil(mpu_dev, &freq)) + omap_device_scale(mpu_dev, mpu_dev, freq); + +#ifdef CONFIG_SMP + /* Update loops per jiffy */ + freqs.new = omap_getspeed(policy->cpu); + for_each_cpu(i, policy->cpus) + per_cpu(cpu_data, i).loops_per_jiffy = + cpufreq_scale(per_cpu(cpu_data, i).loops_per_jiffy, + freqs.old, freqs.new); +#endif + /* post notifiers */ + for_each_cpu(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } +#endif return ret; } @@ -114,7 +166,14 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(0); - clk_init_cpufreq_table(&freq_table); + if (!cpu_is_omap34xx()) { + clk_init_cpufreq_table(&freq_table); + } else { + struct device *mpu_dev = omap2_get_mpuss_device(); + + opp_init_cpufreq_table(mpu_dev, &freq_table); + } + if (freq_table) { result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (!result) @@ -126,6 +185,10 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) VERY_HI_RATE) / 1000; } + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->cur = omap_getspeed(0); + /* FIXME: what's the actual transition time? */ policy->cpuinfo.transition_latency = 300 * 1000; @@ -160,7 +223,7 @@ static int __init omap_cpufreq_init(void) return cpufreq_register_driver(&omap_driver); } -arch_initcall(omap_cpufreq_init); +late_initcall(omap_cpufreq_init); /* * if ever we want to remove this, upon cleanup call: diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c4b2b478b1a..85363084cc1 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe +#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch) printk(KERN_INFO "DMA misaligned error with device %d\n", dma_chan[ch].dev_id); - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch); + p->dma_write(status, CSR, ch); p->dma_write(1 << ch, IRQSTATUS_L0, ch); /* read back the register to flush the write */ p->dma_read(IRQSTATUS_L0, ch); @@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch) OMAP_DMA_CHAIN_INCQHEAD(chain_id); status = p->dma_read(CSR, ch); + p->dma_write(status, CSR, ch); } - p->dma_write(status, CSR, ch); - if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 6b8088ec74a..29b2afb4288 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -35,6 +35,9 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; +extern bool omap_32k_timer_init(void); +extern int __init omap_init_clocksource_32k(void); +extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 537f4e449f5..2fb057e1cb9 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -23,6 +23,7 @@ #include <linux/list.h> #include <linux/kobject.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <asm/atomic.h> #define DISPC_IRQ_FRAMEDONE (1 << 0) @@ -226,6 +227,21 @@ struct omap_dss_board_info { struct omap_dss_device *default_device; }; +#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) +/* Init with the board info */ +extern int omap_display_init(struct omap_dss_board_info *board_data); +#else +static inline int omap_display_init(struct omap_dss_board_info *board_data) +{ + return 0; +} +#endif + +struct omap_display_platform_data { + struct omap_dss_board_info *board_data; + /* TODO: Additional members to be added when PM is considered */ +}; + struct omap_video_timings { /* Unit: pixels */ u16 x_res; diff --git a/arch/arm/plat-omap/include/plat/dvfs.h b/arch/arm/plat-omap/include/plat/dvfs.h new file mode 100644 index 00000000000..1be2b9d8bd3 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dvfs.h @@ -0,0 +1,34 @@ +/* + * OMAP3/OMAP4 DVFS Management Routines + * + * Author: Vishwanath BS <vishwanath.bs@ti.com> + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Vishwanath BS <vishwanath.bs@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_DVFS_H +#define __ARCH_ARM_MACH_OMAP2_DVFS_H +#include <plat/voltage.h> + +#ifdef CONFIG_PM +int omap_dvfs_register_device(struct voltagedomain *voltdm, struct device *dev); +int omap_device_scale(struct device *req_dev, struct device *dev, + unsigned long rate); +#else +static inline int omap_dvfs_register_device(struct voltagedomain *voltdm, + struct device *dev) +{ + return -EINVAL; +} +static inline int omap_device_scale(struct device *req_dev, struct devices + *target_dev, unsigned long rate); +{ + return -EINVAL; +} +#endif +#endif diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h new file mode 100644 index 00000000000..b8b5641379b --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H + +/* L3 CONNIDs */ +/* Display Sub system (DSS) */ +#define OMAP2_L3_CORE_FW_CONNID_DSS 8 + +#endif diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h new file mode 100644 index 00000000000..cde1938c5f8 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l3_3xxx.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H + +/* L3 Initiator IDs */ +/* Display Sub system (DSS) */ +#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29 + +#endif diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h new file mode 100644 index 00000000000..3f39cf8a35c --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H + +/* L4 CORE */ +/* Display Sub system (DSS) */ +#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28 +#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29 +#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30 +#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31 +#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32 + +#endif diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h index 5e194937542..881a858b1ff 100644 --- a/arch/arm/plat-omap/include/plat/l4_3xxx.h +++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h @@ -21,4 +21,14 @@ #define OMAP3_L4_CORE_FW_I2C3_REGION 73 #define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74 +/* Display Sub system (DSS) */ +#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2 + +#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104 +#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3 +#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4 +#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4 +#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5 +#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6 +#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7 #endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h index f8d922fb558..e6720aa2d55 100644 --- a/arch/arm/plat-omap/include/plat/memory.h +++ b/arch/arm/plat-omap/include/plat/memory.h @@ -37,9 +37,9 @@ * Physical DRAM offset. */ #if defined(CONFIG_ARCH_OMAP1) -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #else -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif /* diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index e4c349ff9fd..204fb0a9b2f 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -50,6 +50,8 @@ extern struct device omap_device_parent; * @hwmods: (one .. many per omap_device) * @hwmods_cnt: ARRAY_SIZE() of @hwmods * @pm_lats: ptr to an omap_device_pm_latency table + * @set_rate: fn ptr to change the operating rate. + * @get_rate: fn ptr to retrieve the current operating rate. * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats * @pm_lat_level: array index of the last odpl entry executed - -1 if never * @dev_wakeup_lat: dev wakeup latency in nanoseconds @@ -73,6 +75,8 @@ struct omap_device { s8 pm_lat_level; u8 hwmods_cnt; u8 _state; + int (*set_rate)(struct device *dev, unsigned long rate); + unsigned long (*get_rate) (struct device *dev); }; /* Device driver interface (call via platform_data fn ptrs) */ @@ -107,6 +111,11 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od); int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); +int omap_device_set_rate(struct device *dev, unsigned long freq); +unsigned long omap_device_get_rate(struct device *dev); +void omap_device_register_dvfs_callbacks(struct device *dev, + int (*set_rate)(struct device *dev, unsigned long rate), + unsigned long (*get_rate) (struct device *dev)); u32 omap_device_get_context_loss_count(struct platform_device *pdev); /* Other */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index cec5d56db2e..8ff605c83ac 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 5bd204e55c3..e0b7f22155d 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -113,6 +113,154 @@ struct omap_volt_pmic_info { u8 (*uv_to_vsel) (unsigned long uV); }; +/* Voltage processor register offsets */ +struct vp_reg_offs { + u8 vpconfig; + u8 vstepmin; + u8 vstepmax; + u8 vlimitto; + u8 vstatus; + u8 voltage; +}; + +/* Voltage Processor bit field values, shifts and masks */ +struct vp_reg_val { + /* PRM module */ + u16 prm_mod; + /* VPx_VPCONFIG */ + u32 vpconfig_erroroffset; + u16 vpconfig_errorgain; + u32 vpconfig_errorgain_mask; + u8 vpconfig_errorgain_shift; + u32 vpconfig_initvoltage_mask; + u8 vpconfig_initvoltage_shift; + u32 vpconfig_timeouten; + u32 vpconfig_initvdd; + u32 vpconfig_forceupdate; + u32 vpconfig_vpenable; + /* VPx_VSTEPMIN */ + u8 vstepmin_stepmin; + u16 vstepmin_smpswaittimemin; + u8 vstepmin_stepmin_shift; + u8 vstepmin_smpswaittimemin_shift; + /* VPx_VSTEPMAX */ + u8 vstepmax_stepmax; + u16 vstepmax_smpswaittimemax; + u8 vstepmax_stepmax_shift; + u8 vstepmax_smpswaittimemax_shift; + /* VPx_VLIMITTO */ + u8 vlimitto_vddmin; + u8 vlimitto_vddmax; + u16 vlimitto_timeout; + u8 vlimitto_vddmin_shift; + u8 vlimitto_vddmax_shift; + u8 vlimitto_timeout_shift; + /* PRM_IRQSTATUS*/ + u32 tranxdone_status; +}; + +/* Voltage controller registers and offsets */ +struct vc_reg_info { + /* PRM module */ + u16 prm_mod; + /* VC register offsets */ + u8 smps_sa_reg; + u8 smps_volra_reg; + u8 bypass_val_reg; + u8 cmdval_reg; + u8 voltsetup_reg; + /*VC_SMPS_SA*/ + u8 smps_sa_shift; + u32 smps_sa_mask; + /* VC_SMPS_VOL_RA */ + u8 smps_volra_shift; + u32 smps_volra_mask; + /* VC_BYPASS_VAL */ + u8 data_shift; + u8 slaveaddr_shift; + u8 regaddr_shift; + u32 valid; + /* VC_CMD_VAL */ + u8 cmd_on_shift; + u8 cmd_onlp_shift; + u8 cmd_ret_shift; + u8 cmd_off_shift; + u32 cmd_on_mask; + /* PRM_VOLTSETUP */ + u8 voltsetup_shift; + u32 voltsetup_mask; +}; + + +/** + * omap_vdd_dep_volt - Table containing the parent vdd voltage and the + * dependent vdd voltage corresponding to it. + * + * @main_vdd_volt : The main vdd voltage + * @dep_vdd_volt : The voltage at which the dependent vdd should be + * when the main vdd is at <main_vdd_volt> voltage + */ +struct omap_vdd_dep_volt { + u32 main_vdd_volt; + u32 dep_vdd_volt; +}; + +/** + * omap_vdd_dep_info - Dependent vdd info + * + * @name : Dependent vdd name + * @voltdm : Dependent vdd pointer + * @dep_table : Table containing the dependent vdd voltage + * corresponding to every main vdd voltage. + */ +struct omap_vdd_dep_info { + char *name; + struct voltagedomain *voltdm; + struct omap_vdd_dep_volt *dep_table; +}; + + +/** + * omap_vdd_info - Per Voltage Domain info + * + * @volt_data : voltage table having the distinct voltages supported + * by the domain and other associated per voltage data. + * @pmic_info : pmic specific parameters which should be populted by + * the pmic drivers. + * @vp_offs : structure containing the offsets for various + * vp registers + * @vp_reg : the register values, shifts, masks for various + * vp registers + * @vc_reg : structure containing various various vc registers, + * shifts, masks etc. + * @voltdm : pointer to the voltage domain structure + * @debug_dir : debug directory for this voltage domain. + * @curr_volt : current voltage for this vdd. + * @ocp_mod : The prm module for accessing the prm irqstatus reg. + * @prm_irqst_reg : prm irqstatus register. + * @vp_enabled : flag to keep track of whether vp is enabled or not + * @volt_scale : API to scale the voltage of the vdd. + */ +struct omap_vdd_info { + struct omap_volt_data *volt_data; + struct omap_volt_pmic_info *pmic_info; + struct vp_reg_offs vp_offs; + struct vp_reg_val vp_reg; + struct vc_reg_info vc_reg; + struct voltagedomain voltdm; + struct omap_vdd_dep_info *dep_vdd_info; + int nr_dep_vdd; + struct dentry *debug_dir; + u32 curr_volt; + u16 ocp_mod; + u8 prm_irqst_reg; + bool vp_enabled; + u32 (*read_reg) (u16 mod, u8 offset); + void (*write_reg) (u32 val, u16 mod, u8 offset); + int (*volt_scale) (struct omap_vdd_info *vdd, + unsigned long target_volt); +}; + unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); void omap_vp_enable(struct voltagedomain *voltdm); void omap_vp_disable(struct voltagedomain *voltdm); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 57adb270767..4cee430c40d 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -86,6 +86,7 @@ #include <plat/omap_device.h> #include <plat/omap_hwmod.h> +#include <plat/dvfs.h> /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 @@ -481,6 +482,14 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; _add_optional_clock_alias(od, hwmods[i]); + if (!is_early_device && hwmods[i]->vdd_name) { + struct omap_hwmod *oh = hwmods[i]; + struct voltagedomain *voltdm; + + voltdm = omap_voltage_domain_lookup(oh->vdd_name); + if (!omap_dvfs_register_device(voltdm, &od->pdev.dev)) + oh->voltdm = voltdm; + } } if (ret) @@ -801,6 +810,55 @@ int omap_device_enable_clocks(struct omap_device *od) return 0; } +int omap_device_set_rate(struct device *dev, unsigned long freq) +{ + struct platform_device *pdev; + struct omap_device *od; + + pdev = container_of(dev, struct platform_device, dev); + od = _find_by_pdev(pdev); + + if (!od->set_rate) { + dev_err(dev, "%s: No set_rate API for scaling device\n", + __func__); + return -ENODATA; + } + + return od->set_rate(dev, freq); +} + +unsigned long omap_device_get_rate(struct device *dev) +{ + struct platform_device *pdev; + struct omap_device *od; + + pdev = container_of(dev, struct platform_device, dev); + od = _find_by_pdev(pdev); + + + if (!od->get_rate) { + dev_err(dev, "%s: No get rate API for the device\n", + __func__); + return 0; + } + + return od->get_rate(dev); +} + +void omap_device_register_dvfs_callbacks(struct device *dev, + int (*set_rate)(struct device *dev, unsigned long rate), + unsigned long (*get_rate) (struct device *dev)) +{ + struct platform_device *pdev; + struct omap_device *od; + + pdev = container_of(dev, struct platform_device, dev); + od = _find_by_pdev(pdev); + + od->set_rate = set_rate; + od->get_rate = get_rate; +} + struct device omap_device_parent = { .init_name = "omap", .parent = &platform_bus, diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index b77e018d36c..a9aa5ad3f4e 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = { #define mfp_configured(p) ((p)->config != -1) /* - * perform a read-back of any MFPR register to make sure the + * perform a read-back of any valid MFPR register to make sure the * previous writings are finished */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) static inline void __mfp_config_run(struct mfp_pin *p) { @@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map) spin_lock_irqsave(&mfp_spin_lock, flags); + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + for (p = map; p->start != MFP_PIN_INVALID; p++) { offset = p->offset; i = p->start; diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index deb39951a22..557f8c507f6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -37,6 +37,14 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +comment "System MMU" + +config S5P_SYSTEM_MMU + bool "S5P SYSTEM MMU" + depends on ARCH_S5PV310 + help + Say Y here if you want to enable System MMU + config S5P_DEV_FIMC0 bool help @@ -66,19 +74,3 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 - -menuconfig S5P_SYSMMU - bool "SYSMMU support" - depends on ARCH_S5PV310 - help - This is a System MMU driver for Samsung ARM based Soc. - -if S5P_SYSMMU - -config S5P_SYSMMU_DEBUG - bool "Enables debug messages" - depends on S5P_SYSMMU - help - This enables SYSMMU driver debug massages. - -endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 92efe1adcfd..4bd5cf90897 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,6 +19,7 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o @@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index 6a734288617..afaf87fdb93 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -28,7 +28,7 @@ static struct resource s5p_uart0_resource[] = { [0] = { .start = S5P_PA_UART0, - .end = S5P_PA_UART0 + S5P_SZ_UART, + .end = S5P_PA_UART0 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = { static struct resource s5p_uart1_resource[] = { [0] = { .start = S5P_PA_UART1, - .end = S5P_PA_UART1 + S5P_SZ_UART, + .end = S5P_PA_UART1 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = { static struct resource s5p_uart2_resource[] = { [0] = { .start = S5P_PA_UART2, - .end = S5P_PA_UART2 + S5P_SZ_UART, + .end = S5P_PA_UART2 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 [0] = { .start = S5P_PA_UART3, - .end = S5P_PA_UART3 + S5P_SZ_UART, + .end = S5P_PA_UART3 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 4 [0] = { .start = S5P_PA_UART4, - .end = S5P_PA_UART4 + S5P_SZ_UART, + .end = S5P_PA_UART4 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 5 [0] = { .start = S5P_PA_UART5, - .end = S5P_PA_UART5 + S5P_SZ_UART, + .end = S5P_PA_UART5 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index db298fc5438..00000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_SYSMMU_H -#define __ASM_PLAT_S5P_SYSMMU_H __FILE__ - -/* debug macro */ -#ifdef CONFIG_S5P_SYSMMU_DEBUG -#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg) -#else -#define sysmmu_debug(fmt, arg...) do { } while (0) -#endif - -#endif /* __ASM_PLAT_S5P_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index d804914dc2e..ffe8a48bc3c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -16,8 +16,6 @@ #include <mach/regs-sysmmu.h> #include <mach/sysmmu.h> -#include <plat/sysmmu.h> - struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) @@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) : "=r" (pg) : : "cc"); \ pg &= ~0x3fff; - sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg); + printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); /* Set sysmmu page table base address */ __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e37767..30518cc9a67 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,6 +17,8 @@ #include <linux/irq.h> +struct sys_device; + #ifdef CONFIG_PM extern __init int s3c_pm_init(void); diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h index 27a4aba7734..7e3599e1104 100644 --- a/arch/arm/plat-spear/include/plat/memory.h +++ b/arch/arm/plat-spear/include/plat/memory.h @@ -15,6 +15,6 @@ #define __PLAT_MEMORY_H /* Physical DRAM offset */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 99ba6789cc9..6dd455bafdf 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -24,10 +24,10 @@ static inline void putc(int c) { void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; - while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) barrier(); - writel(c, base + UART01x_DR); + writel_relaxed(c, base + UART01x_DR); } static inline void flush(void) diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h index 09e9372aea2..8c8b24d0704 100644 --- a/arch/arm/plat-spear/include/plat/vmalloc.h +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -14,6 +14,6 @@ #ifndef __PLAT_VMALLOC_H #define __PLAT_VMALLOC_H -#define VMALLOC_END 0xF0000000 +#define VMALLOC_END 0xF0000000UL #endif /* __PLAT_VMALLOC_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h index 7b875a07a1a..61fa54882e1 100644 --- a/arch/arm/plat-stmp3xxx/include/mach/memory.h +++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h @@ -17,6 +17,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #endif diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h index cd91ba8a670..28a6e0cd13b 100644 --- a/arch/arm/plat-tcc/include/mach/memory.h +++ b/arch/arm/plat-tcc/include/mach/memory.h @@ -13,6 +13,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #endif diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2fea897ebeb..9d6feaabbe7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Dec 12 23:24:27 2010 +# Last update: Mon Feb 7 08:59:27 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 vs_v210 MACH_VS_V210 VS_V210 2252 vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -suen3 MACH_SUEN3 SUEN3 2255 +km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 vesper MACH_VESPER VESPER 2256 str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 @@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 ea20 MACH_EA20 EA20 3002 awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 -tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +seaboard MACH_SEABOARD SEABOARD 3005 linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 rubys MACH_RUBYS RUBYS 3008 @@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 punica MACH_PUNICA PUNICA 3208 -sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +trimslice MACH_TRIMSLICE TRIMSLICE 3209 mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 fa9x27 MACH_FA9X27 FA9X27 3213 @@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235 pcm048 MACH_PCM048 PCM048 3236 dds MACH_DDS DDS 3237 chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 +ts48xx MACH_TS48XX TS48XX 3239 +tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240 +whistler MACH_WHISTLER WHISTLER 3241 +asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242 +at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243 +ddplug MACH_DDPLUG DDPLUG 3244 +d2plug MACH_D2PLUG D2PLUG 3245 +kzm9d MACH_KZM9D KZM9D 3246 +verdi_lte MACH_VERDI_LTE VERDI_LTE 3247 +nanozoom MACH_NANOZOOM NANOZOOM 3248 +dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249 +dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250 +anchovy MACH_ANCHOVY ANCHOVY 3251 +re2rev20 MACH_RE2REV20 RE2REV20 3253 +re2rev21 MACH_RE2REV21 RE2REV21 3254 +cns21xx MACH_CNS21XX CNS21XX 3255 +rider MACH_RIDER RIDER 3257 +nsk330 MACH_NSK330 NSK330 3258 +cns2133evb MACH_CNS2133EVB CNS2133EVB 3259 +z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260 +z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261 +beect MACH_BEECT BEECT 3262 +dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263 +omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264 +mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265 +mione MACH_MIONE MIONE 3266 +top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267 +top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268 +kingdom MACH_KINGDOM KINGDOM 3269 +armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270 +lq2 MACH_LQ2 LQ2 3271 +sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272 +mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 +acer_a8 MACH_ACER_A8 ACER_A8 3275 +acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276 +guppy MACH_GUPPY GUPPY 3277 +mx61_ard MACH_MX61_ARD MX61_ARD 3278 +tx53 MACH_TX53 TX53 3279 +omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 +uemd MACH_UEMD UEMD 3281 +ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 +rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 +nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +hkdkc100 MACH_HKDKC100 HKDKC100 3285 +ts42xx MACH_TS42XX TS42XX 3286 +aebl MACH_AEBL AEBL 3287 +wario MACH_WARIO WARIO 3288 +gfs_spm MACH_GFS_SPM GFS_SPM 3289 +cm_t3730 MACH_CM_T3730 CM_T3730 3290 +isc3 MACH_ISC3 ISC3 3291 +rascal MACH_RASCAL RASCAL 3292 +hrefv60 MACH_HREFV60 HREFV60 3293 +tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 +pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 +splendor MACH_SPLENDOR SPLENDOR 3296 +guf_planet MACH_GUF_PLANET GUF_PLANET 3297 +msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 +htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 +athene MACH_ATHENE ATHENE 3300 +deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301 +vivow_ct MACH_VIVOW_CT VIVOW_CT 3302 +nery_1000 MACH_NERY_1000 NERY_1000 3303 +rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 +nmh MACH_NMH NMH 3305 +wn802t MACH_WN802T WN802T 3306 +dragonet MACH_DRAGONET DRAGONET 3307 +geneva_b MACH_GENEVA_B GENEVA_B 3308 +at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 +bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 +bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 +koi MACH_KOI KOI 3312 +ts4800 MACH_TS4800 TS4800 3313 +tqma9263 MACH_TQMA9263 TQMA9263 3314 +holiday MACH_HOLIDAY HOLIDAY 3315 +dma_6410 MACH_DMA6410 DMA6410 3316 +pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 +hwgw6410 MACH_HWGW6410 HWGW6410 3318 +shenzhou MACH_SHENZHOU SHENZHOU 3319 +cwme9210 MACH_CWME9210 CWME9210 3320 +cwme9210js MACH_CWME9210JS CWME9210JS 3321 +pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 +colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 +w21 MACH_W21 W21 3324 +polysat1 MACH_POLYSAT1 POLYSAT1 3325 +dataway MACH_DATAWAY DATAWAY 3326 +cobral138 MACH_COBRAL138 COBRAL138 3327 +roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328 +marvelc MACH_MARVELC MARVELC 3329 +navefihid MACH_NAVEFIHID NAVEFIHID 3330 +dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331 +able MACH_ABLE ABLE 3332 +legacy MACH_LEGACY LEGACY 3333 +icong MACH_ICONG ICONG 3334 +rover_g8 MACH_ROVER_G8 ROVER_G8 3335 +t5388p MACH_T5388P T5388P 3336 +dingo MACH_DINGO DINGO 3337 +goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 92ecd8446ef..bc7e8ae479e 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -8,6 +8,7 @@ #ifndef __ASM_AVR32_PGALLOC_H #define __ASM_AVR32_PGALLOC_H +#include <linux/mm.h> #include <linux/quicklist.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 1ff9f1468c0..7dbc664eab1 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -10,6 +10,7 @@ #define __BFIN_ASM_SERIAL_H__ #include <linux/serial_core.h> +#include <linux/spinlock.h> #include <mach/anomaly.h> #include <mach/bfin_serial.h> @@ -41,6 +42,7 @@ struct bfin_serial_port { struct circ_buf rx_dma_buf; struct timer_list rx_dma_timer; int rx_dma_nrows; + spinlock_t rx_lock; unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index f745c1287f3..76eaf3883fb 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW /* FIXME M32R */ #endif - __do_IRQ(irq); + generic_handle_irq(irq); irq_exit(); set_irq_regs(old_regs); diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index b1577f741fa..82a4bb51d5d 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -610,17 +610,17 @@ static void amiga_mem_console_write(struct console *co, const char *s, static int __init amiga_savekmsg_setup(char *arg) { - static struct resource debug_res = { .name = "Debug" }; - if (!MACH_IS_AMIGA || strcmp(arg, "mem")) - goto done; + return 0; - if (!AMIGAHW_PRESENT(CHIP_RAM)) { - printk("Warning: no chipram present for debugging\n"); - goto done; + if (amiga_chip_size < SAVEKMSG_MAXMEM) { + pr_err("Not enough chipram for debugging\n"); + return -ENOMEM; } - savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res); + /* Just steal the block, the chipram allocator isn't functional yet */ + amiga_chip_size -= SAVEKMSG_MAXMEM; + savekmsg = (void *)ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size); savekmsg->magic1 = SAVEKMSG_MAGIC1; savekmsg->magic2 = SAVEKMSG_MAGIC2; savekmsg->magicptr = ZTWO_PADDR(savekmsg); @@ -628,8 +628,6 @@ static int __init amiga_savekmsg_setup(char *arg) amiga_console_driver.write = amiga_mem_console_write; register_console(&amiga_console_driver); - -done: return 0; } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 39478dd08e6..26a804e67bc 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -388,9 +388,9 @@ void __init atari_init_IRQ(void) } if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) { - scc.cha_a_ctrl = 9; + atari_scc.cha_a_ctrl = 9; MFPDELAY(); - scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */ + atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */ } if (ATARIHW_PRESENT(SCU)) { diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index ae2d96e5d61..4203d101363 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -315,7 +315,7 @@ void __init config_atari(void) ATARIHW_SET(SCC_DMA); printk("SCC_DMA "); } - if (scc_test(&scc.cha_a_ctrl)) { + if (scc_test(&atari_scc.cha_a_ctrl)) { ATARIHW_SET(SCC); printk("SCC "); } diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c index 28efdc33c1a..5a484247e49 100644 --- a/arch/m68k/atari/debug.c +++ b/arch/m68k/atari/debug.c @@ -53,9 +53,9 @@ static inline void ata_scc_out(char c) { do { MFPDELAY(); - } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ + } while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ MFPDELAY(); - scc.cha_b_data = c; + atari_scc.cha_b_data = c; } static void atari_scc_console_write(struct console *co, const char *str, @@ -140,9 +140,9 @@ int atari_scc_console_wait_key(struct console *co) { do { MFPDELAY(); - } while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */ + } while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */ MFPDELAY(); - return scc.cha_b_data; + return atari_scc.cha_b_data; } int atari_midi_console_wait_key(struct console *co) @@ -185,9 +185,9 @@ static void __init atari_init_mfp_port(int cflag) #define SCC_WRITE(reg, val) \ do { \ - scc.cha_b_ctrl = (reg); \ + atari_scc.cha_b_ctrl = (reg); \ MFPDELAY(); \ - scc.cha_b_ctrl = (val); \ + atari_scc.cha_b_ctrl = (val); \ MFPDELAY(); \ } while (0) @@ -240,7 +240,7 @@ static void __init atari_init_scc_port(int cflag) reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40; reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */; - (void)scc.cha_b_ctrl; /* reset reg pointer */ + (void)atari_scc.cha_b_ctrl; /* reset reg pointer */ SCC_WRITE(9, 0xc0); /* reset */ LONG_DELAY(); /* extra delay after WR9 access */ SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h index a714e1aa072..f51f709bbf3 100644 --- a/arch/m68k/include/asm/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h @@ -449,7 +449,7 @@ struct SCC u_char char_dummy3; u_char cha_b_data; }; -# define scc ((*(volatile struct SCC*)SCC_BAS)) +# define atari_scc ((*(volatile struct SCC*)SCC_BAS)) /* The ESCC (Z85230) in an Atari ST. The channels are reversed! */ # define st_escc ((*(volatile struct SCC*)0xfffffa31)) diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index 2936dda938d..32198454da7 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -81,18 +81,6 @@ static inline char *strncpy(char *dest, const char *src, size_t n) strcpy(__d + strlen(__d), (s)); \ }) -#define __HAVE_ARCH_STRCHR -static inline char *strchr(const char *s, int c) -{ - char sc, ch = c; - - for (; (sc = *s++) != ch; ) { - if (!sc) - return NULL; - } - return (char *)s - 1; -} - #ifndef CONFIG_COLDFIRE #define __HAVE_ARCH_STRCMP static inline int strcmp(const char *cs, const char *ct) @@ -111,14 +99,12 @@ static inline int strcmp(const char *cs, const char *ct) : "+a" (cs), "+a" (ct), "=d" (res)); return res; } +#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMMOVE extern void *memmove(void *, const void *, __kernel_size_t); -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, __kernel_size_t); #define memcmp(d, s, n) __builtin_memcmp(d, s, n) -#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, __kernel_size_t); diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c index 4253f870e54..d399c5f2563 100644 --- a/arch/m68k/lib/string.c +++ b/arch/m68k/lib/string.c @@ -243,14 +243,3 @@ void *memmove(void *dest, const void *src, size_t n) return xdest; } EXPORT_SYMBOL(memmove); - -int memcmp(const void *cs, const void *ct, size_t count) -{ - const unsigned char *su1, *su2; - - for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--) - if (*su1 != *su2) - return *su1 < *su2 ? -1 : +1; - return 0; -} -EXPORT_SYMBOL(memcmp); diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index ef332136f96..47e15ebfd89 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -141,6 +141,12 @@ SECTIONS { *(__param) __stop___param = .; + /* Built-in module versions */ + . = ALIGN(4) ; + __start___modver = .; + *(__modver) + __stop___modver = .; + . = ALIGN(4) ; _etext = . ; } > TEXT diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile index d94d709665a..32d852e586d 100644 --- a/arch/m68knommu/lib/Makefile +++ b/arch/m68knommu/lib/Makefile @@ -4,4 +4,4 @@ lib-y := ashldi3.o ashrdi3.o lshrdi3.o \ muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memset.o delay.o + checksum.o memcpy.o memmove.o memset.o delay.o diff --git a/arch/m68knommu/lib/memmove.c b/arch/m68knommu/lib/memmove.c new file mode 100644 index 00000000000..b3dcfe9dab7 --- /dev/null +++ b/arch/m68knommu/lib/memmove.c @@ -0,0 +1,105 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#define __IN_STRING_C + +#include <linux/module.h> +#include <linux/string.h> + +void *memmove(void *dest, const void *src, size_t n) +{ + void *xdest = dest; + size_t temp; + + if (!n) + return xdest; + + if (dest < src) { + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest++ = *csrc++; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *ldest++ = *lsrc++; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest = *csrc; + } + } else { + dest = (char *)dest + n; + src = (const char *)src + n; + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *--ldest = *--lsrc; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + } + } + return xdest; +} +EXPORT_SYMBOL(memmove); diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c index d09d9da0453..c5151f84659 100644 --- a/arch/m68knommu/platform/5249/intc2.c +++ b/arch/m68knommu/platform/5249/intc2.c @@ -50,8 +50,10 @@ static int __init mcf_intc2_init(void) int irq; /* GPIO interrupt sources */ - for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) + for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) { irq_desc[irq].chip = &intc2_irq_gpio_chip; + set_irq_handler(irq, handle_edge_irq); + } return 0; } diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index 240a7a6e25c..676960cf022 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -108,7 +108,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/68360/commproc.c b/arch/m68knommu/platform/68360/commproc.c index f27e688c404..8e4e10cc008 100644 --- a/arch/m68knommu/platform/68360/commproc.c +++ b/arch/m68knommu/platform/68360/commproc.c @@ -210,7 +210,7 @@ void cpm_install_handler(int vec, void (*handler)(), void *dev_id) { - request_irq(vec, handler, IRQ_FLG_LOCK, "timer", dev_id); + request_irq(vec, handler, 0, "timer", dev_id); /* if (cpm_vecs[vec].handler != 0) */ /* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */ diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c index ac629fa3009..9dd5bca3874 100644 --- a/arch/m68knommu/platform/68360/config.c +++ b/arch/m68knommu/platform/68360/config.c @@ -75,7 +75,7 @@ void hw_timer_init(void) /* Set compare register 32Khz / 32 / 10 = 100 */ TCMP = 10; - request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL); + request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL); #endif /* General purpose quicc timers: MC68360UM p7-20 */ diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index 8a28788c0ee..46c1b18c9dc 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -104,7 +104,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index ad96ab1051f..a29041c1a8a 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -132,8 +132,8 @@ void init_IRQ(void) pquicc->intr_cimr = 0x00000000; for (i = 0; (i < NR_IRQS); i++) { - set_irq_chip(irq, &intc_irq_chip); - set_irq_handler(irq, handle_level_irq); + set_irq_chip(i, &intc_irq_chip); + set_irq_handler(i, handle_level_irq); } } diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index 4ddfc3da70d..5837cf080b6 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -138,7 +138,6 @@ Luser_return: andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ - andl #0xefff,%d1 jne Lwork_to_do /* still work to do */ Lreturn: diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index 5fd31905775..c4532f032b3 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -12,7 +12,7 @@ #include <linux/types.h> #include <asm/registers.h> -#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR static inline unsigned long arch_local_irq_save(void) { diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index b23f6807587..885574a73f0 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline unsigned long pte_update(pte_t *p, unsigned long clr, unsigned long set) { - unsigned long old, tmp, msr; - - __asm__ __volatile__("\ - msrclr %2, 0x2\n\ - nop\n\ - lw %0, %4, r0\n\ - andn %1, %0, %5\n\ - or %1, %1, %6\n\ - sw %1, %4, r0\n\ - mts rmsr, %2\n\ - nop" - : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p) - : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p) - : "cc"); + unsigned long flags, old, tmp; + + raw_local_irq_save(flags); + + __asm__ __volatile__( "lw %0, %2, r0 \n" + "andn %1, %0, %3 \n" + "or %1, %1, %4 \n" + "sw %1, %2, r0 \n" + : "=&r" (old), "=&r" (tmp) + : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set) + : "cc"); + + raw_local_irq_restore(flags); return old; } diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index e01afa68273..488c1ed24e3 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ register unsigned tmp __asm__("r3"); \ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ - "mfs %0, rpvr" #pvrid ";" \ + "mfs %0, rpvr" #pvrid ";" \ : "=r" (tmp) : : "memory"); \ val = tmp; \ } @@ -54,7 +54,7 @@ int cpu_has_pvr(void) if (!(flags & PVR_MSR_BIT)) return 0; - get_single_pvr(0x00, pvr0); + get_single_pvr(0, pvr0); pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); if (pvr0 & PVR0_PVR_FULL_MASK) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209..778a5ce2e4f 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,23 +62,32 @@ real_start: andi r1, r1, ~2 mts rmsr, r1 /* - * Here is checking mechanism which check if Microblaze has msr instructions - * We load msr and compare it with previous r1 value - if is the same, - * msr instructions works if not - cpu don't have them. + * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' + * if the msrclr instruction is not enabled. We use this to detect + * if the opcode is available, by issuing msrclr and then testing the result. + * r8 == 0 - msr instructions are implemented + * r8 != 0 - msr instructions are not implemented */ - /* r8=0 - I have msr instr, 1 - I don't have them */ - rsubi r0, r0, 1 /* set the carry bit */ - msrclr r0, 0x4 /* try to clear it */ - /* read the carry bit, r8 will be '0' if msrclr exists */ - addik r8, r0, 0 + msrclr r8, 0 /* clear nothing - just read msr for test */ + cmpu r8, r8, r1 /* r1 must contain msr reg content */ /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 25f6e07d8de..782680de312 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index bb1558e4b28..9312fbb37ef 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) eprintk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %d\n", msr); + "CPU don't have it %x\n", msr); #else if (!msr) eprintk("!!!Your kernel not setup MSR instruction but " - "CPU have it %d\n", msr); + "CPU have it %x\n", msr); #endif for (src = __ivt_start; src < __ivt_end; src++, dst++) diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index fdc48bb065d..62021d7e249 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -29,6 +29,10 @@ * between mem locations with size of xfer spec'd in bytes */ +#ifdef __MICROBLAZEEL__ +#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM. +#endif + #include <linux/linkage.h> .text .globl memcpy diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 11bdd68e576..fc770be465f 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -169,11 +169,11 @@ static int __init pdc_console_tty_driver_init(void) struct console *tmp; - acquire_console_sem(); + console_lock(); for_each_console(tmp) if (tmp == &pdc_cons) break; - release_console_sem(); + console_unlock(); if (!tmp) { printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name); diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 8eaed81ea64..17194fcd404 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -40,8 +40,8 @@ /* MAS registers bit definitions */ -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_TLBSEL(x) (((x) << 28) & 0x30000000) +#define MAS0_ESEL(x) (((x) << 16) & 0x0FFF0000) #define MAS0_NV(x) ((x) & 0x00000FFF) #define MAS0_HES 0x00004000 #define MAS0_WQ_ALLWAYS 0x00000000 @@ -50,12 +50,12 @@ #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) #define MAS1_IND 0x00002000 #define MAS1_TS 0x00001000 #define MAS1_TSIZE_MASK 0x00000f80 #define MAS1_TSIZE_SHIFT 7 -#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) +#define MAS1_TSIZE(x) (((x) << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 53b64be40eb..da4b2000854 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -101,7 +101,7 @@ extern phys_addr_t kernstart_addr; #ifdef CONFIG_FLATMEM #define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) #endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 55cba4a8a95..f8cd9fba4d3 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -18,7 +18,7 @@ #include <asm/mmu.h> _GLOBAL(__setup_cpu_603) - mflr r4 + mflr r5 BEGIN_MMU_FTR_SECTION li r10,0 mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ @@ -27,60 +27,60 @@ BEGIN_FTR_SECTION bl __init_fpu_registers END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) bl setup_common_caches - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_604) - mflr r4 + mflr r5 bl setup_common_caches bl setup_604_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750cx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750cx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750fx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750fx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7400) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7400_workarounds bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7410) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7410_workarounds bl setup_common_caches bl setup_750_7400_hid0 li r3,0 mtspr SPRN_L2CR2,r3 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_745x) - mflr r4 + mflr r5 bl setup_common_caches bl setup_745x_specifics - mtlr r4 + mtlr r5 blr /* Enable caches for 603's, 604, 750 & 7400 */ @@ -194,10 +194,10 @@ setup_750cx: cror 4*cr0+eq,4*cr0+eq,4*cr1+eq cror 4*cr0+eq,4*cr0+eq,4*cr2+eq bnelr - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) blr /* 750fx specific @@ -225,12 +225,12 @@ BEGIN_FTR_SECTION andis. r11,r11,L3CR_L3E@h beq 1f END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) andi. r0,r6,CPU_FTR_L3_DISABLE_NAP beq 1f li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) 1: mfspr r11,SPRN_HID0 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 8d74a24c550..e8e915ce3d8 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2076,8 +2076,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * pointer on ppc64 and booke as we are running at 0 in real mode * on ppc64 and reloc_offset is always 0 on booke. */ - if (s->cpu_setup) { - s->cpu_setup(offset, s); + if (t->cpu_setup) { + t->cpu_setup(offset, t); } #endif /* CONFIG_PPC64 || CONFIG_BOOKE */ } diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c index 4dcf5f831e9..b0dc8f7069c 100644 --- a/arch/powerpc/kernel/perf_event_fsl_emb.c +++ b/arch/powerpc/kernel/perf_event_fsl_emb.c @@ -596,6 +596,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, if (left <= 0) left = period; record = 1; + event->hw.last_period = event->hw.sample_period; } if (left < 0x80000000LL) val = 0x80000000LL - left; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bf5cb91f07d..fd481232957 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -186,7 +186,7 @@ static void unmap_cpu_from_node(unsigned long cpu) dbg("removing cpu %lu from node %d\n", cpu, node); if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { - cpumask_set_cpu(cpu, node_to_cpumask_map[node]); + cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); } else { printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", cpu, node); @@ -1289,10 +1289,9 @@ u64 memory_hotplug_max(void) } #endif /* CONFIG_MEMORY_HOTPLUG */ -/* Vrtual Processor Home Node (VPHN) support */ +/* Virtual Processor Home Node (VPHN) support */ #ifdef CONFIG_PPC_SPLPAR -#define VPHN_NR_CHANGE_CTRS (8) -static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; +static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS]; static cpumask_t cpu_associativity_changes_mask; static int vphn_enabled; static void set_topology_timer(void); @@ -1303,16 +1302,18 @@ static void set_topology_timer(void); */ static void setup_cpu_associativity_change_counters(void) { - int cpu = 0; + int cpu; + + /* The VPHN feature supports a maximum of 8 reference points */ + BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8); for_each_possible_cpu(cpu) { - int i = 0; + int i; u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + for (i = 0; i < distance_ref_points_depth; i++) counts[i] = hypervisor_counts[i]; - } } } @@ -1329,7 +1330,7 @@ static void setup_cpu_associativity_change_counters(void) */ static int update_cpu_associativity_changes_mask(void) { - int cpu = 0, nr_cpus = 0; + int cpu, nr_cpus = 0; cpumask_t *changes = &cpu_associativity_changes_mask; cpumask_clear(changes); @@ -1339,8 +1340,8 @@ static int update_cpu_associativity_changes_mask(void) u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { - if (hypervisor_counts[i] > counts[i]) { + for (i = 0; i < distance_ref_points_depth; i++) { + if (hypervisor_counts[i] != counts[i]) { counts[i] = hypervisor_counts[i]; changed = 1; } @@ -1354,8 +1355,11 @@ static int update_cpu_associativity_changes_mask(void) return nr_cpus; } -/* 6 64-bit registers unpacked into 12 32-bit associativity values */ -#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) +/* + * 6 64-bit registers unpacked into 12 32-bit associativity values. To form + * the complete property we have to add the length in the first cell. + */ +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32) + 1) /* * Convert the associativity domain numbers returned from the hypervisor @@ -1363,15 +1367,14 @@ static int update_cpu_associativity_changes_mask(void) */ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) { - int i = 0; - int nr_assoc_doms = 0; + int i, nr_assoc_doms = 0; const u16 *field = (const u16*) packed; #define VPHN_FIELD_UNUSED (0xffff) #define VPHN_FIELD_MSB (0x8000) #define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) - for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { + for (i = 1; i < VPHN_ASSOC_BUFSIZE; i++) { if (*field == VPHN_FIELD_UNUSED) { /* All significant fields processed, and remaining * fields contain the reserved value of all 1's. @@ -1379,14 +1382,12 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ unpacked[i] = *((u32*)field); field += 2; - } - else if (*field & VPHN_FIELD_MSB) { + } else if (*field & VPHN_FIELD_MSB) { /* Data is in the lower 15 bits of this field */ unpacked[i] = *field & VPHN_FIELD_MASK; field++; nr_assoc_doms++; - } - else { + } else { /* Data is in the lower 15 bits of this field * concatenated with the next 16 bit field */ @@ -1396,6 +1397,9 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) } } + /* The first cell contains the length of the property */ + unpacked[0] = nr_assoc_doms; + return nr_assoc_doms; } @@ -1405,7 +1409,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; u64 flags = 1; int hwcpu = get_hard_smp_processor_id(cpu); @@ -1419,7 +1423,7 @@ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) static long vphn_get_associativity(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; rc = hcall_vphn(cpu, associativity); @@ -1445,9 +1449,9 @@ static long vphn_get_associativity(unsigned long cpu, */ int arch_update_cpu_topology(void) { - int cpu = 0, nid = 0, old_nid = 0; + int cpu, nid, old_nid; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; - struct sys_device *sysdev = NULL; + struct sys_device *sysdev; for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { vphn_get_associativity(cpu, associativity); @@ -1512,7 +1516,8 @@ int start_topology_update(void) { int rc = 0; - if (firmware_has_feature(FW_FEATURE_VPHN)) { + if (firmware_has_feature(FW_FEATURE_VPHN) && + get_lppaca()->shared_proc) { vphn_enabled = 1; setup_cpu_associativity_change_counters(); init_timer_deferrable(&topology_timer); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 5d3ea9f60dd..ca5d5898d32 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -713,6 +713,13 @@ EXPORT_SYMBOL(arch_free_page); /* NB: reg/unreg are called while guarded with the tracepoints_mutex */ extern long hcall_tracepoint_refcount; +/* + * Since the tracing code might execute hcalls we need to guard against + * recursion. One example of this are spinlocks calling H_YIELD on + * shared processor partitions. + */ +static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); + void hcall_tracepoint_regfunc(void) { hcall_tracepoint_refcount++; @@ -725,12 +732,42 @@ void hcall_tracepoint_unregfunc(void) void __trace_hcall_entry(unsigned long opcode, unsigned long *args) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_entry(opcode, args); + (*depth)--; + +out: + local_irq_restore(flags); } void __trace_hcall_exit(long opcode, unsigned long retval, unsigned long *retbuf) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_exit(opcode, retval, retbuf); + (*depth)--; + +out: + local_irq_restore(flags); } #endif diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff19efdf6fe..636bcb81d06 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -406,7 +406,7 @@ config QDIO If unsure, say Y. config CHSC_SCH - def_tristate y + def_tristate m prompt "Support for CHSC subchannels" help This driver allows usage of CHSC subchannels. A CHSC subchannel diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index f42dbabc0d3..48884f89ab9 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -38,6 +38,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len) BUG_ON(ret != bsize); data += bsize - index; len -= bsize - index; + index = 0; } /* process as many blocks as possible */ diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 405cc97c624..7e1f7762062 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -1,29 +1,8 @@ #ifndef _S390_CACHEFLUSH_H #define _S390_CACHEFLUSH_H -/* Keep includes the same across arches. */ -#include <linux/mm.h> - /* Caches aren't brain-dead on the s390. */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +#include <asm-generic/cacheflush.h> #ifdef CONFIG_DEBUG_PAGEALLOC void kernel_map_pages(struct page *page, int numpages, int enable); diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index bf3de04170a..2c79b641627 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -148,11 +148,6 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); */ extern unsigned long thread_saved_pc(struct task_struct *t); -/* - * Print register of task into buffer. Used in fs/proc/array.c. - */ -extern void task_show_regs(struct seq_file *m, struct task_struct *task); - extern void show_code(struct pt_regs *regs); unsigned long get_wchan(struct task_struct *p); diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index f1f644f2240..9074a54c4d1 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -22,6 +22,7 @@ */ #include <linux/mm.h> +#include <linux/pagemap.h> #include <linux/swap.h> #include <asm/processor.h> #include <asm/pgalloc.h> diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 5eb78dd584c..b5a4a739b47 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -237,43 +237,6 @@ void show_regs(struct pt_regs *regs) show_last_breaking_event(regs); } -/* This is called from fs/proc/array.c */ -void task_show_regs(struct seq_file *m, struct task_struct *task) -{ - struct pt_regs *regs; - - regs = task_pt_regs(task); - seq_printf(m, "task: %p, ksp: %p\n", - task, (void *)task->thread.ksp); - seq_printf(m, "User PSW : %p %p\n", - (void *) regs->psw.mask, (void *)regs->psw.addr); - - seq_printf(m, "User GPRS: " FOURLONG, - regs->gprs[0], regs->gprs[1], - regs->gprs[2], regs->gprs[3]); - seq_printf(m, " " FOURLONG, - regs->gprs[4], regs->gprs[5], - regs->gprs[6], regs->gprs[7]); - seq_printf(m, " " FOURLONG, - regs->gprs[8], regs->gprs[9], - regs->gprs[10], regs->gprs[11]); - seq_printf(m, " " FOURLONG, - regs->gprs[12], regs->gprs[13], - regs->gprs[14], regs->gprs[15]); - seq_printf(m, "User ACRS: %08x %08x %08x %08x\n", - task->thread.acrs[0], task->thread.acrs[1], - task->thread.acrs[2], task->thread.acrs[3]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[4], task->thread.acrs[5], - task->thread.acrs[6], task->thread.acrs[7]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[8], task->thread.acrs[9], - task->thread.acrs[10], task->thread.acrs[11]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[12], task->thread.acrs[13], - task->thread.acrs[14], task->thread.acrs[15]); -} - static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 07deaeee14c..a6c4f7ed24a 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to, unsigned long tmp1; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" "0:"AHI" %0,257\n" "1: mvc 0(1,%1),0(%2)\n" @@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to, "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,1b-0b(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1) : : "cc", "memory"); @@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to) unsigned long tmp1, tmp2; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" " xc 0(1,%1),0(%1)\n" "0:"AHI" %0,257\n" @@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to) "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,0(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2) : : "cc", "memory"); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 0c719c61972..e1850c28cd6 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) page->flags ^= bits; if (page->flags & FRAG_MASK) { /* Page now has some free pgtable fragments. */ - list_move(&page->lru, &mm->context.pgtable_list); + if (!list_empty(&page->lru)) + list_move(&page->lru, &mm->context.pgtable_list); page = NULL; } else /* All fragments of the 4K page have been freed. */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ae555569823..8a9011dced1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ select HAVE_KERNEL_LZO select HAVE_SYSCALL_TRACEPOINTS select HAVE_REGS_AND_STACK_ACCESS_API diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 9c8c6e1a2a1..e3d8170ad00 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -200,7 +200,7 @@ endif libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \ +BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \ romImage PHONY += $(BOOT_TARGETS) @@ -230,5 +230,6 @@ define archhelp @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)' @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' + @echo ' uImage.xz - Kernel-only image for U-Boot (xz)' @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)' endef diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 33b662999fc..701667acfd8 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -1294,6 +1294,7 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); +#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE) /* VOU */ gpio_request(GPIO_FN_DV_D15, NULL); gpio_request(GPIO_FN_DV_D14, NULL); @@ -1325,6 +1326,7 @@ static int __init arch_setup(void) /* Remove reset */ gpio_set_value(GPIO_PTG4, 1); +#endif return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 1ce63624c9b..ba515d80024 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -24,12 +24,13 @@ suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_XZ) := xz suffix-$(CONFIG_KERNEL_LZO) := lzo targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \ - uImage.bz2 uImage.lzma uImage.lzo uImage.bin + uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \ - vmlinux.bin.lzo + vmlinux.bin.xz vmlinux.bin.lzo subdir- := compressed romimage $(obj)/zImage: $(obj)/compressed/vmlinux FORCE @@ -76,6 +77,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE + $(call if_changed,xzkern) + $(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE $(call if_changed,lzo) @@ -88,6 +92,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz + $(call if_changed,uimage,xz) + $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo $(call if_changed,uimage,lzo) diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index cfa5a087a88..e0b0293bae6 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -6,7 +6,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ vmlinux.bin.bz2 vmlinux.bin.lzma \ - vmlinux.bin.lzo \ + vmlinux.bin.xz vmlinux.bin.lzo \ head_$(BITS).o misc.o piggy.o OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o @@ -50,6 +50,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,xzkern) $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzo) diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index 27140a6b365..95470a472d2 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -61,6 +61,10 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_XZ +#include "../../../../lib/decompress_unxz.c" +#endif + #ifdef CONFIG_KERNEL_LZO #include "../../../../lib/decompress_unlzo.c" #endif diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 083ea068e81..db85916b9e9 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -134,6 +134,7 @@ typedef pte_t *pte_addr_t; extern void pgtable_cache_init(void); struct vm_area_struct; +struct mm_struct; extern void __update_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte); diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index c2b0aaaedca..672944f5b19 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -230,10 +230,10 @@ static struct platform_device *sh7750_devices[] __initdata = { static int __init sh7750_devices_setup(void) { if (mach_is_rts7751r2d()) { - platform_register_device(&scif_device); + platform_device_register(&scif_device); } else { - platform_register_device(&sci_device); - platform_register_device(&scif_device); + platform_device_register(&sci_device); + platform_device_register(&scif_device); } return platform_add_devices(sh7750_devices, diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 948fdb65693..38e862852dd 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c @@ -17,6 +17,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); cpumask_t cpu_core_map[NR_CPUS]; +EXPORT_SYMBOL(cpu_core_map); static cpumask_t cpu_coregroup_map(unsigned int cpu) { diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index a2f5c61f924..843e4faf6a5 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -43,4 +43,6 @@ static inline u64 picl_value(unsigned int nmi_hz) extern u64 pcr_enable; +extern int pcr_arch_init(void); + #endif /* __PCR_H */ diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c index 47977a77f6c..72509d0e34b 100644 --- a/arch/sparc/kernel/iommu.c +++ b/arch/sparc/kernel/iommu.c @@ -255,10 +255,9 @@ static inline iopte_t *alloc_npages(struct device *dev, struct iommu *iommu, static int iommu_alloc_ctx(struct iommu *iommu) { int lowest = iommu->ctx_lowest_free; - int sz = IOMMU_NUM_CTXS - lowest; - int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + int n = find_next_zero_bit(iommu->ctx_bitmap, IOMMU_NUM_CTXS, lowest); - if (unlikely(n == sz)) { + if (unlikely(n == IOMMU_NUM_CTXS)) { n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); if (unlikely(n == lowest)) { printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c index ae96cf52a95..7c2ced612b8 100644 --- a/arch/sparc/kernel/pcr.c +++ b/arch/sparc/kernel/pcr.c @@ -167,5 +167,3 @@ out_unregister: unregister_perf_hsvc(); return err; } - -early_initcall(pcr_arch_init); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index b6a2b8f4704..555a76d1f4a 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -49,6 +49,7 @@ #include <asm/mdesc.h> #include <asm/ldc.h> #include <asm/hypervisor.h> +#include <asm/pcr.h> #include "cpumap.h" @@ -1358,6 +1359,7 @@ void __cpu_die(unsigned int cpu) void __init smp_cpus_done(unsigned int max_cpus) { + pcr_arch_init(); } void smp_send_reschedule(int cpu) diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S index 8cc03458eb7..8f096e84a93 100644 --- a/arch/sparc/kernel/una_asm_32.S +++ b/arch/sparc/kernel/una_asm_32.S @@ -24,9 +24,9 @@ retl_efault: .globl __do_int_store __do_int_store: ld [%o2], %g1 - cmp %1, 2 + cmp %o1, 2 be 2f - cmp %1, 4 + cmp %o1, 4 be 1f srl %g1, 24, %g2 srl %g1, 16, %g7 diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c index 764b3eb7b60..48d00e72ce1 100644 --- a/arch/sparc/lib/bitext.c +++ b/arch/sparc/lib/bitext.c @@ -10,7 +10,7 @@ */ #include <linux/string.h> -#include <linux/bitops.h> +#include <linux/bitmap.h> #include <asm/bitext.h> @@ -80,8 +80,7 @@ int bit_map_string_get(struct bit_map *t, int len, int align) while (test_bit(offset + i, t->map) == 0) { i++; if (i == len) { - for (i = 0; i < len; i++) - __set_bit(offset + i, t->map); + bitmap_set(t->map, offset, len); if (offset == t->first_free) t->first_free = find_next_zero_bit (t->map, t->size, diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 5e3969c36d7..3c896946f4c 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); extern void end_local_APIC_setup(void); +extern void bsp_end_local_APIC_setup(void); extern void init_apic_mappings(void); void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h index 63e35ec9075..62f084478f7 100644 --- a/arch/x86/include/asm/cacheflush.h +++ b/arch/x86/include/asm/cacheflush.h @@ -1,48 +1,8 @@ #ifndef _ASM_X86_CACHEFLUSH_H #define _ASM_X86_CACHEFLUSH_H -/* Keep includes the same across arches. */ -#include <linux/mm.h> - /* Caches aren't brain-dead on the intel. */ -static inline void flush_cache_all(void) { } -static inline void flush_cache_mm(struct mm_struct *mm) { } -static inline void flush_cache_dup_mm(struct mm_struct *mm) { } -static inline void flush_cache_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) { } -static inline void flush_cache_page(struct vm_area_struct *vma, - unsigned long vmaddr, unsigned long pfn) { } -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -static inline void flush_dcache_page(struct page *page) { } -static inline void flush_dcache_mmap_lock(struct address_space *mapping) { } -static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { } -static inline void flush_icache_range(unsigned long start, - unsigned long end) { } -static inline void flush_icache_page(struct vm_area_struct *vma, - struct page *page) { } -static inline void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, - unsigned long addr, - unsigned long len) { } -static inline void flush_cache_vmap(unsigned long start, unsigned long end) { } -static inline void flush_cache_vunmap(unsigned long start, - unsigned long end) { } - -static inline void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, const void *src, - unsigned long len) -{ - memcpy(dst, src, len); -} - -static inline void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, const void *src, - unsigned long len) -{ - memcpy(dst, src, len); -} +#include <asm-generic/cacheflush.h> #ifdef CONFIG_X86_PAT /* diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 4fab24de26b..4564c8e28a3 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -32,5 +32,6 @@ extern void arch_unregister_cpu(int); DECLARE_PER_CPU(int, cpu_state); +int mwait_usable(const struct cpuinfo_x86 *); #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h index f52d42e8058..574dbc22893 100644 --- a/arch/x86/include/asm/jump_label.h +++ b/arch/x86/include/asm/jump_label.h @@ -14,7 +14,7 @@ do { \ asm goto("1:" \ JUMP_LABEL_INITIAL_NOP \ - ".pushsection __jump_table, \"a\" \n\t"\ + ".pushsection __jump_table, \"aw\" \n\t"\ _ASM_PTR "1b, %l[" #label "], %c0 \n\t" \ ".popsection \n\t" \ : : "i" (key) : : label); \ diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 4a2d4e0c18d..8b5393ec108 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, unsigned cpu = smp_processor_id(); if (likely(prev != next)) { - /* stop flush ipis for the previous mm */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); #ifdef CONFIG_SMP percpu_write(cpu_tlbstate.state, TLBSTATE_OK); percpu_write(cpu_tlbstate.active_mm, next); @@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, /* Re-load page tables */ load_cr3(next->pgd); + /* stop flush ipis for the previous mm */ + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + /* * load the LDT, if the LDT is different: */ diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 2071a8b2b32..ebbc4d8ab17 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -558,13 +558,12 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pmd_t pmd) { -#if PAGETABLE_LEVELS >= 3 if (sizeof(pmdval_t) > sizeof(long)) /* 5 arg words */ pv_mmu_ops.set_pmd_at(mm, addr, pmdp, pmd); else - PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp, pmd.pmd); -#endif + PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp, + native_pmd_val(pmd)); } #endif diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 3788f4649db..7e172955ee5 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -273,34 +273,34 @@ do { \ typeof(var) pxo_new__ = (nval); \ switch (sizeof(var)) { \ case 1: \ - asm("\n1:mov "__percpu_arg(1)",%%al" \ - "\n\tcmpxchgb %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%al" \ + "\n1:\tcmpxchgb %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "q" (pxo_new__) \ : "memory"); \ break; \ case 2: \ - asm("\n1:mov "__percpu_arg(1)",%%ax" \ - "\n\tcmpxchgw %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%ax" \ + "\n1:\tcmpxchgw %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ case 4: \ - asm("\n1:mov "__percpu_arg(1)",%%eax" \ - "\n\tcmpxchgl %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%eax" \ + "\n1:\tcmpxchgl %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ case 8: \ - asm("\n1:mov "__percpu_arg(1)",%%rax" \ - "\n\tcmpxchgq %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%rax" \ + "\n1:\tcmpxchgq %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4c2f63c7fc1..1f469513677 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -40,10 +40,7 @@ DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); /* Static state in head.S used to set up a CPU */ -extern struct { - void *sp; - unsigned short ss; -} stack_start; +extern unsigned long stack_start; /* Initial stack pointer address */ struct smp_ops { void (*smp_prepare_boot_cpu)(void); diff --git a/arch/x86/include/asm/system_64.h b/arch/x86/include/asm/system_64.h deleted file mode 100644 index 1159e091ad0..00000000000 --- a/arch/x86/include/asm/system_64.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_X86_SYSTEM_64_H -#define _ASM_X86_SYSTEM_64_H - -#include <asm/segment.h> -#include <asm/cmpxchg.h> - - -static inline unsigned long read_cr8(void) -{ - unsigned long cr8; - asm volatile("movq %%cr8,%0" : "=r" (cr8)); - return cr8; -} - -static inline void write_cr8(unsigned long val) -{ - asm volatile("movq %0,%%cr8" :: "r" (val) : "memory"); -} - -#include <linux/irqflags.h> - -#endif /* _ASM_X86_SYSTEM_64_H */ diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 69fd72aa559..68d1537b8c8 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -12,10 +12,8 @@ #include <linux/cpumask.h> #include <asm/segment.h> #include <asm/desc.h> - -#ifdef CONFIG_X86_32 #include <asm/pgtable.h> -#endif +#include <asm/cacheflush.h> #include "realmode/wakeup.h" #include "sleep.h" @@ -100,7 +98,7 @@ int acpi_save_state_mem(void) #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; #ifdef CONFIG_SMP - stack_start.sp = temp_stack + sizeof(temp_stack); + stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(smp_processor_id()); initial_gs = per_cpu_offset(smp_processor_id()); @@ -149,6 +147,15 @@ void __init acpi_reserve_wakeup_memory(void) memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); } +int __init acpi_configure_wakeup_memory(void) +{ + if (acpi_realmode) + set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT); + + return 0; +} +arch_initcall(acpi_configure_wakeup_memory); + static int __init acpi_sleep_setup(char *str) { diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 123608531c8..7038b95d363 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -671,7 +671,7 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) atomic_set(&stop_machine_first, 1); wrote_text = 0; - stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); + __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); } #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59..76b96d74978 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void) #endif apic_pm_activate(); +} + +void __init bsp_end_local_APIC_setup(void) +{ + end_local_APIC_setup(); /* * Now that local APIC setup is completed for BP, configure the fault * handling for interrupt remapping. */ - if (!smp_processor_id() && intr_remapping_enabled) + if (intr_remapping_enabled) enable_drhd_fault_handling(); } @@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void) enable_IO_APIC(); #endif - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 697dc34b7b8..ca9e2a3545a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi) { int i = 0; + if (nr_ioapics == 0) + return -1; + /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { if ((gsi >= mp_gsi_routing[i].gsi_base) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 7283e98deaa..ec2c19a7b8e 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -45,6 +45,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */ { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */ + { 0x0e, LVL_1_DATA, 24 }, /* 6-way set assoc, 64 byte line size */ { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x23, LVL_3, MB(1) }, /* 8-way set assoc, sectored cache, 64 byte line size */ @@ -66,6 +67,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x45, LVL_2, MB(2) }, /* 4-way set assoc, 32 byte line size */ { 0x46, LVL_3, MB(4) }, /* 4-way set assoc, 64 byte line size */ { 0x47, LVL_3, MB(8) }, /* 8-way set assoc, 64 byte line size */ + { 0x48, LVL_2, MB(3) }, /* 12-way set assoc, 64 byte line size */ { 0x49, LVL_3, MB(4) }, /* 16-way set assoc, 64 byte line size */ { 0x4a, LVL_3, MB(6) }, /* 12-way set assoc, 64 byte line size */ { 0x4b, LVL_3, MB(8) }, /* 16-way set assoc, 64 byte line size */ @@ -87,6 +89,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x7c, LVL_2, MB(1) }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x7d, LVL_2, MB(2) }, /* 8-way set assoc, 64 byte line size */ { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */ + { 0x80, LVL_2, 512 }, /* 8-way set assoc, 64 byte line size */ { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */ { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */ { 0x84, LVL_2, MB(1) }, /* 8-way set assoc, 32 byte line size */ diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index e12246ff5aa..6f8c5e9da97 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -59,6 +59,7 @@ struct thermal_state { /* Callback to handle core threshold interrupts */ int (*platform_thermal_notify)(__u64 msr_val); +EXPORT_SYMBOL(platform_thermal_notify); static DEFINE_PER_CPU(struct thermal_state, thermal_state); diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 01c0f3ee6cc..bebabec5b44 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void) } /* - * MTRR initialization for all AP's + * Delayed MTRR initialization for all AP's */ void mtrr_aps_init(void) { if (!use_intel()) return; + /* + * Check if someone has requested the delay of AP MTRR initialization, + * by doing set_mtrr_aps_delayed_init(), prior to this point. If not, + * then we are done. + */ + if (!mtrr_aps_delayed_init) + return; + set_mtrr(~0U, 0, 0, 0); mtrr_aps_delayed_init = false; } diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index e56b9bfbabd..f7a0993c1e7 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event) * if an event is shared accross the logical threads * the user needs special permissions to be able to use it */ - if (p4_event_bind_map[v].shared) { + if (p4_ht_active() && p4_event_bind_map[v].shared) { if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN)) return -EACCES; } @@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event) event->hw.config = p4_set_ht_bit(event->hw.config); if (event->attr.type == PERF_TYPE_RAW) { - + struct p4_event_bind *bind; + unsigned int esel; /* * Clear bits we reserve to be managed by kernel itself * and never allowed from a user space @@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event) * bits since we keep additional info here (for cache events and etc) */ event->hw.config |= event->attr.config; + bind = p4_config_get_bind(event->attr.config); + if (!bind) { + rc = -EINVAL; + goto out; + } + esel = P4_OPCODE_ESEL(bind->opcode); + event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel)); } rc = x86_setup_perfctr(event); diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 64101335de1..a6b6fcf7f0a 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -149,13 +149,13 @@ void dump_trace(struct task_struct *task, unsigned used = 0; struct thread_info *tinfo; int graph = 0; + unsigned long dummy; unsigned long bp; if (!task) task = current; if (!stack) { - unsigned long dummy; stack = &dummy; if (task && task != current) stack = (unsigned long *)task->thread.sp; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index fc293dc8dc3..767d6c43de3 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -85,6 +85,8 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE) */ __HEAD ENTRY(startup_32) + movl pa(stack_start),%ecx + /* test KEEP_SEGMENTS flag to see if the bootloader is asking us to not reload segments */ testb $(1<<6), BP_loadflags(%esi) @@ -99,7 +101,9 @@ ENTRY(startup_32) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl %eax,%ss 2: + leal -__PAGE_OFFSET(%ecx),%esp /* * Clear BSS first so that there are no surprises... @@ -145,8 +149,6 @@ ENTRY(startup_32) * _brk_end is set up to point to the first "safe" location. * Mappings are created both at virtual address 0 (identity mapping) * and PAGE_OFFSET for up to _end. - * - * Note that the stack is not yet set up! */ #ifdef CONFIG_X86_PAE @@ -282,6 +284,9 @@ ENTRY(startup_32_smp) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl pa(stack_start),%ecx + movl %eax,%ss + leal -__PAGE_OFFSET(%ecx),%esp #endif /* CONFIG_SMP */ default_entry: @@ -347,8 +352,8 @@ default_entry: movl %eax,%cr0 /* ..and set paging (PG) bit */ ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ 1: - /* Set up the stack pointer */ - lss stack_start,%esp + /* Shift the stack pointer to a virtual address */ + addl $__PAGE_OFFSET, %esp /* * Initialize eflags. Some BIOS's leave bits like NT set. This would @@ -360,9 +365,7 @@ default_entry: #ifdef CONFIG_SMP cmpb $0, ready - jz 1f /* Initial CPU cleans BSS */ - jmp checkCPUtype -1: + jnz checkCPUtype #endif /* CONFIG_SMP */ /* @@ -470,14 +473,7 @@ is386: movl $2,%ecx # set MP cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder -#ifdef CONFIG_SMP - movb ready, %cl movb $1, ready - cmpb $0,%cl # the first CPU calls start_kernel - je 1f - movl (stack_start), %esp -1: -#endif /* CONFIG_SMP */ jmp *(initial_code) /* @@ -670,15 +666,15 @@ ENTRY(initial_page_table) #endif .data +.balign 4 ENTRY(stack_start) .long init_thread_union+THREAD_SIZE - .long __BOOT_DS - -ready: .byte 0 early_recursion_flag: .long 0 +ready: .byte 0 + int_msg: .asciz "Unknown interrupt or fault at: %p %p %p\n" diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 52945da52a9..387b6a0c9e8 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -367,7 +367,8 @@ void fixup_irqs(void) if (irr & (1 << (vector % 32))) { irq = __this_cpu_read(vector_irq[vector]); - data = irq_get_irq_data(irq); + desc = irq_to_desc(irq); + data = &desc->irq_data; raw_spin_lock(&desc->lock); if (data->chip->irq_retrigger) data->chip->irq_retrigger(data); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index d8286ed54ff..ff455419898 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -14,6 +14,7 @@ #include <linux/utsname.h> #include <trace/events/power.h> #include <linux/hw_breakpoint.h> +#include <asm/cpu.h> #include <asm/system.h> #include <asm/apic.h> #include <asm/syscalls.h> @@ -91,21 +92,31 @@ void show_regs(struct pt_regs *regs) void show_regs_common(void) { - const char *board, *product; + const char *vendor, *product, *board; - board = dmi_get_system_info(DMI_BOARD_NAME); - if (!board) - board = ""; + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor) + vendor = ""; product = dmi_get_system_info(DMI_PRODUCT_NAME); if (!product) product = ""; + /* Board Name is optional */ + board = dmi_get_system_info(DMI_BOARD_NAME); + printk(KERN_CONT "\n"); - printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board, product); + init_utsname()->version); + printk(KERN_CONT " "); + printk(KERN_CONT "%s %s", vendor, product); + if (board) { + printk(KERN_CONT "/"); + printk(KERN_CONT "%s", board); + } + printk(KERN_CONT "\n"); } void flush_thread(void) @@ -505,7 +516,7 @@ static void poll_idle(void) #define MWAIT_ECX_EXTENDED_INFO 0x01 #define MWAIT_EDX_C1 0xf0 -static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) +int mwait_usable(const struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 763df77343d..08776a95348 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -638,7 +638,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) * target processor state. */ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, - (unsigned long)stack_start.sp); + stack_start); /* * Run STARTUP IPI loop. @@ -785,7 +785,7 @@ do_rest: #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); initial_code = (unsigned long)start_secondary; - stack_start.sp = (void *) c_idle.idle->thread.sp; + stack_start = c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); @@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus) connect_bsp_APIC(); setup_local_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); return -1; } @@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); map_cpu_to_logical_apicid(); @@ -1402,8 +1402,9 @@ static inline void mwait_play_dead(void) unsigned int highest_subcstate = 0; int i; void *mwait_ptr; + struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info); - if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_MWAIT)) + if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c))) return; if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH)) return; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 25bd1bc5aad..54ce246a383 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1150,8 +1150,8 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu) kvm_load_ldt(svm->host.ldt); #ifdef CONFIG_X86_64 loadsegment(fs, svm->host.fs); - load_gs_index(svm->host.gs); wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs); + load_gs_index(svm->host.gs); #else loadsegment(gs, svm->host.gs); #endif diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 8b830ca14ac..d343b3c81f3 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, unsigned long pfn) { pgprot_t forbidden = __pgprot(0); - pgprot_t required = __pgprot(0); /* * The BIOS area between 640k and 1Mb needs to be executable for @@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT, __pa((unsigned long)__end_rodata) >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_RW; - /* - * .data and .bss should always be writable. - */ - if (within(address, (unsigned long)_sdata, (unsigned long)_edata) || - within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop)) - pgprot_val(required) |= _PAGE_RW; #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) /* @@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, #endif prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden)); - prot = __pgprot(pgprot_val(prot) | pgprot_val(required)); return prot; } diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index ddc81a06edb..fd12d7ce7ff 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -241,21 +241,15 @@ void __init xen_build_dynamic_phys_to_machine(void) * As long as the mfn_list has enough entries to completely * fill a p2m page, pointing into the array is ok. But if * not the entries beyond the last pfn will be undefined. - * And guessing that the 'what-ever-there-is' does not take it - * too kindly when changing it to invalid markers, a new page - * is allocated, initialized and filled with the valid part. */ if (unlikely(pfn + P2M_PER_PAGE > max_pfn)) { unsigned long p2midx; - unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_init(p2m); - - for (p2midx = 0; pfn + p2midx < max_pfn; p2midx++) { - p2m[p2midx] = mfn_list[pfn + p2midx]; - } - p2m_top[topidx][mididx] = p2m; - } else - p2m_top[topidx][mididx] = &mfn_list[pfn]; + + p2midx = max_pfn % P2M_PER_PAGE; + for ( ; p2midx < P2M_PER_PAGE; p2midx++) + mfn_list[pfn + p2midx] = INVALID_P2M_ENTRY; + } + p2m_top[topidx][mididx] = &mfn_list[pfn]; } m2p_override_init(); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b5a7f928234..a8a66a50d44 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -179,8 +179,13 @@ char * __init xen_memory_setup(void) e820.nr_map = 0; xen_extra_mem_start = mem_end; for (i = 0; i < memmap.nr_entries; i++) { - unsigned long long end = map[i].addr + map[i].size; + unsigned long long end; + /* Guard against non-page aligned E820 entries. */ + if (map[i].type == E820_RAM) + map[i].size -= (map[i].size + map[i].addr) % PAGE_SIZE; + + end = map[i].addr + map[i].size; if (map[i].type == E820_RAM && end > mem_end) { /* RAM off the end - may be partially included */ u64 delta = min(map[i].size, end - mem_end); @@ -350,6 +355,7 @@ void __init xen_arch_setup(void) boot_cpu_data.hlt_works_ok = 1; #endif pm_idle = default_idle; + boot_option_idle_override = IDLE_HALT; fiddle_vdso(); } |