aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/alchemy
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r--arch/mips/alchemy/common/clocks.c2
-rw-r--r--arch/mips/alchemy/common/dbdma.c123
-rw-r--r--arch/mips/alchemy/common/dma.c46
-rw-r--r--arch/mips/alchemy/common/irq.c345
-rw-r--r--arch/mips/alchemy/common/platform.c250
-rw-r--r--arch/mips/alchemy/common/setup.c4
-rw-r--r--arch/mips/alchemy/common/time.c3
-rw-r--r--arch/mips/alchemy/devboards/db1200/setup.c7
-rw-r--r--arch/mips/alchemy/devboards/db1x00/board_setup.c61
-rw-r--r--arch/mips/alchemy/devboards/pb1000/board_setup.c2
-rw-r--r--arch/mips/alchemy/devboards/pb1500/board_setup.c2
-rw-r--r--arch/mips/alchemy/devboards/prom.c2
-rw-r--r--arch/mips/alchemy/gpr/board_setup.c14
-rw-r--r--arch/mips/alchemy/gpr/init.c2
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c2
-rw-r--r--arch/mips/alchemy/mtx-1/init.c2
-rw-r--r--arch/mips/alchemy/mtx-1/platform.c4
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c11
-rw-r--r--arch/mips/alchemy/xxs1500/init.c7
19 files changed, 461 insertions, 428 deletions
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index af0fe41055a..f38298a8b98 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -75,7 +75,7 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
- * properly. This function is futher convoluted to still allow configurations
+ * properly. This function is further convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
* write-only PLL register. -- Dan
*/
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index ca0506a8585..3a5abb54d50 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -36,7 +36,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static dbdma_global_t *dbdma_gptr =
+ (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
static int dbdma_initialized;
static dbdev_tab_t dbdev_tab[] = {
@@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
ctp->chan_index = chan = i;
- dcp = DDMA_CHANNEL_BASE;
+ dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
cp = (au1x_dma_chan_t *)dcp;
@@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
}
-struct alchemy_dbdma_sysdev {
- struct sys_device sysdev;
- u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
-};
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
-static int alchemy_dbdma_suspend(struct sys_device *dev,
- pm_message_t state)
+static int alchemy_dbdma_suspend(void)
{
- struct alchemy_dbdma_sysdev *sdev =
- container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
- u32 addr;
+ void __iomem *addr;
- addr = DDMA_GLOBAL_BASE;
- sdev->pm_regs[0][0] = au_readl(addr + 0x00);
- sdev->pm_regs[0][1] = au_readl(addr + 0x04);
- sdev->pm_regs[0][2] = au_readl(addr + 0x08);
- sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+ alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+ alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+ alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
/* save channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- sdev->pm_regs[i][0] = au_readl(addr + 0x00);
- sdev->pm_regs[i][1] = au_readl(addr + 0x04);
- sdev->pm_regs[i][2] = au_readl(addr + 0x08);
- sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
- sdev->pm_regs[i][4] = au_readl(addr + 0x10);
- sdev->pm_regs[i][5] = au_readl(addr + 0x14);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+ for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+ alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+ alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+ alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+ alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+ alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+ alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
/* halt channel */
- au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
- au_sync();
- while (!(au_readl(addr + 0x14) & 1))
- au_sync();
+ __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+ wmb();
+ while (!(__raw_readl(addr + 0x14) & 1))
+ wmb();
addr += 0x100; /* next channel base */
}
/* disable channel interrupts */
- au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
- au_sync();
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ __raw_writel(0, addr + 0x0c);
+ wmb();
return 0;
}
-static int alchemy_dbdma_resume(struct sys_device *dev)
+static void alchemy_dbdma_resume(void)
{
- struct alchemy_dbdma_sysdev *sdev =
- container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
- u32 addr;
+ void __iomem *addr;
- addr = DDMA_GLOBAL_BASE;
- au_writel(sdev->pm_regs[0][0], addr + 0x00);
- au_writel(sdev->pm_regs[0][1], addr + 0x04);
- au_writel(sdev->pm_regs[0][2], addr + 0x08);
- au_writel(sdev->pm_regs[0][3], addr + 0x0c);
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+ __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+ __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+ __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+ __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
/* restore channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- au_writel(sdev->pm_regs[i][0], addr + 0x00);
- au_writel(sdev->pm_regs[i][1], addr + 0x04);
- au_writel(sdev->pm_regs[i][2], addr + 0x08);
- au_writel(sdev->pm_regs[i][3], addr + 0x0c);
- au_writel(sdev->pm_regs[i][4], addr + 0x10);
- au_writel(sdev->pm_regs[i][5], addr + 0x14);
- au_sync();
+ addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+ for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+ __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+ __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+ __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+ __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+ __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+ __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+ wmb();
addr += 0x100; /* next channel base */
}
-
- return 0;
}
-static struct sysdev_class alchemy_dbdma_sysdev_class = {
- .name = "dbdma",
+static struct syscore_ops alchemy_dbdma_syscore_ops = {
.suspend = alchemy_dbdma_suspend,
.resume = alchemy_dbdma_resume,
};
-static int __init alchemy_dbdma_sysdev_init(void)
-{
- struct alchemy_dbdma_sysdev *sdev;
- int ret;
-
- ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
- if (ret)
- return ret;
-
- sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
- if (!sdev)
- return -ENOMEM;
-
- sdev->sysdev.id = -1;
- sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
- ret = sysdev_register(&sdev->sysdev);
- if (ret)
- kfree(sdev);
-
- return ret;
-}
-
static int __init au1xxx_dbdma_init(void)
{
int irq_nr, ret;
@@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void)
else {
dbdma_initialized = 1;
printk(KERN_INFO "Alchemy DBDMA initialized\n");
- ret = alchemy_dbdma_sysdev_init();
- if (ret) {
- printk(KERN_ERR "DBDMA PM init failed\n");
- ret = 0;
- }
+ register_syscore_ops(&alchemy_dbdma_syscore_ops);
}
return ret;
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index d5278877891..347980e79a8 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -58,6 +58,9 @@
* returned from request_dma.
*/
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN 0x00000100
+
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -77,22 +80,23 @@ static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
} dma_dev_table[DMA_NUM_DEV] = {
- {UART0_ADDR + UART_TX, 0},
- {UART0_ADDR + UART_RX, 0},
- {0, 0},
- {0, 0},
- {AC97C_DATA, DMA_DW16 }, /* coherent */
- {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
- {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
- {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP0WR, DMA_DW8 | DMA_NC},
- {USBD_EP2WR, DMA_DW8 | DMA_NC},
- {USBD_EP3WR, DMA_DW8 | DMA_NC},
- {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
- {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
- {I2S_DATA, DMA_DW32 | DMA_NC},
- {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
+ { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */
+ { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */
+ { 0, 0 }, /* DMA_REQ0 */
+ { 0, 0 }, /* DMA_REQ1 */
+ { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */
+ { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */
+ { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */
+ { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+ { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+ { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+ { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+ { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+ { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+ { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+ /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */
+ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
};
int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
@@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
- { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
- { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
- { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
+ { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */
+ { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */
+ { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */
+ { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
@@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
}
/* fill it in */
- chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
+ chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dev->fifo_addr;
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 55dd7c88851..8b60ba0675e 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -30,7 +30,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
@@ -39,6 +39,36 @@
#include <asm/mach-pb1x00/pb1000.h>
#endif
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD 0x40
+#define IC_CFG0SET 0x40
+#define IC_CFG0CLR 0x44
+#define IC_CFG1RD 0x48
+#define IC_CFG1SET 0x48
+#define IC_CFG1CLR 0x4C
+#define IC_CFG2RD 0x50
+#define IC_CFG2SET 0x50
+#define IC_CFG2CLR 0x54
+#define IC_REQ0INT 0x54
+#define IC_SRCRD 0x58
+#define IC_SRCSET 0x58
+#define IC_SRCCLR 0x5C
+#define IC_REQ1INT 0x5C
+#define IC_ASSIGNRD 0x60
+#define IC_ASSIGNSET 0x60
+#define IC_ASSIGNCLR 0x64
+#define IC_WAKERD 0x68
+#define IC_WAKESET 0x68
+#define IC_WAKECLR 0x6C
+#define IC_MASKRD 0x70
+#define IC_MASKSET 0x70
+#define IC_MASKCLR 0x74
+#define IC_RISINGRD 0x78
+#define IC_RISINGCLR 0x78
+#define IC_FALLINGRD 0x7C
+#define IC_FALLINGCLR 0x7C
+#define IC_TESTBIT 0x80
+
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
/* NOTE on interrupt priorities: The original writers of this code said:
@@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = {
static void au1x_ic0_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKSET);
- au_writel(1 << bit, IC0_WAKESET);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
+ wmb();
}
static void au1x_ic1_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKSET);
- au_writel(1 << bit, IC1_WAKESET);
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
/* very hacky. does the pb1000 cpld auto-disable this int?
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (d->irq == AU1000_GPIO15_INT)
- au_writel(0x4000, PB1000_MDR); /* enable int */
+ __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
#endif
- au_sync();
+ wmb();
}
static void au1x_ic0_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic1_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic0_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic1_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic0_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static void au1x_ic1_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
@@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
return -EINVAL;
local_irq_save(flags);
- wakemsk = au_readl(SYS_WAKEMSK);
+ wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
- au_writel(wakemsk, SYS_WAKEMSK);
- au_sync();
+ __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
+ wmb();
local_irq_restore(flags);
return 0;
@@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = {
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
{
struct irq_chip *chip;
- unsigned long icr[6];
- unsigned int bit, ic, irq = d->irq;
+ unsigned int bit, irq = d->irq;
irq_flow_handler_t handler = NULL;
unsigned char *name = NULL;
+ void __iomem *base;
int ret;
if (irq >= AU1000_INTC1_INT_BASE) {
bit = irq - AU1000_INTC1_INT_BASE;
chip = &au1x_ic1_chip;
- ic = 1;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq - AU1000_INTC0_INT_BASE;
chip = &au1x_ic0_chip;
- ic = 0;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
if (bit > 31)
return -EINVAL;
- icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
- icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
- icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
- icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
- icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
- icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
-
ret = 0;
switch (flow_type) { /* cfgregs 2:1:0 */
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "riseedge";
break;
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_edge_irq;
name = "falledge";
break;
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "bothedge";
break;
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_level_irq;
name = "hilevel";
break;
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_level_irq;
name = "lowlevel";
break;
case IRQ_TYPE_NONE: /* 0:0:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
break;
default:
ret = -EINVAL;
}
__irq_set_chip_handler_name_locked(d->irq, chip, handler, name);
- au_sync();
+ wmb();
return ret;
}
@@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void)
off = MIPS_CPU_IRQ_BASE + 7;
goto handle;
} else if (pending & CAUSEF_IP2) {
- s = IC0_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP3) {
- s = IC0_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP4) {
- s = IC1_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC1_INT_BASE;
} else if (pending & CAUSEF_IP5) {
- s = IC1_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC1_INT_BASE;
} else
goto spurious;
- s = au_readl(s);
+ s = __raw_readl((void __iomem *)s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
@@ -469,48 +504,42 @@ handle:
do_IRQ(off);
}
+
+static inline void ic_init(void __iomem *base)
+{
+ /* initialize interrupt controller to a safe state */
+ __raw_writel(0xffffffff, base + IC_CFG0CLR);
+ __raw_writel(0xffffffff, base + IC_CFG1CLR);
+ __raw_writel(0xffffffff, base + IC_CFG2CLR);
+ __raw_writel(0xffffffff, base + IC_MASKCLR);
+ __raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+ __raw_writel(0xffffffff, base + IC_WAKECLR);
+ __raw_writel(0xffffffff, base + IC_SRCSET);
+ __raw_writel(0xffffffff, base + IC_FALLINGCLR);
+ __raw_writel(0xffffffff, base + IC_RISINGCLR);
+ __raw_writel(0x00000000, base + IC_TESTBIT);
+ wmb();
+}
+
static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
- int i;
-
- /*
- * Initialize interrupt controllers to a safe state.
- */
- au_writel(0xffffffff, IC0_CFG0CLR);
- au_writel(0xffffffff, IC0_CFG1CLR);
- au_writel(0xffffffff, IC0_CFG2CLR);
- au_writel(0xffffffff, IC0_MASKCLR);
- au_writel(0xffffffff, IC0_ASSIGNCLR);
- au_writel(0xffffffff, IC0_WAKECLR);
- au_writel(0xffffffff, IC0_SRCSET);
- au_writel(0xffffffff, IC0_FALLINGCLR);
- au_writel(0xffffffff, IC0_RISINGCLR);
- au_writel(0x00000000, IC0_TESTBIT);
-
- au_writel(0xffffffff, IC1_CFG0CLR);
- au_writel(0xffffffff, IC1_CFG1CLR);
- au_writel(0xffffffff, IC1_CFG2CLR);
- au_writel(0xffffffff, IC1_MASKCLR);
- au_writel(0xffffffff, IC1_ASSIGNCLR);
- au_writel(0xffffffff, IC1_WAKECLR);
- au_writel(0xffffffff, IC1_SRCSET);
- au_writel(0xffffffff, IC1_FALLINGCLR);
- au_writel(0xffffffff, IC1_RISINGCLR);
- au_writel(0x00000000, IC1_TESTBIT);
+ void __iomem *base;
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
mips_cpu_irq_init();
/* register all 64 possible IC0+IC1 irq sources as type "none".
* Use set_irq_type() to set edge/level behaviour at runtime.
*/
- for (i = AU1000_INTC0_INT_BASE;
- (i < AU1000_INTC0_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC0_INT_BASE;
+ (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
- for (i = AU1000_INTC1_INT_BASE;
- (i < AU1000_INTC1_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC1_INT_BASE;
+ (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
/*
* Initialize IC0, which is fixed per processor.
@@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC1_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC0_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
+ if (map->im_request)
+ __raw_writel(1 << bit, base + IC_ASSIGNSET);
au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
++map;
@@ -556,90 +585,62 @@ void __init arch_init_irq(void)
}
}
-struct alchemy_ic_sysdev {
- struct sys_device sysdev;
- void __iomem *base;
- unsigned long pmdata[7];
-};
-static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct alchemy_ic_sysdev *icdev =
- container_of(dev, struct alchemy_ic_sysdev, sysdev);
+static unsigned long alchemy_ic_pmdata[7 * 2];
- icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
- icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
- icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
- icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
- icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
- icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
- icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
-
- return 0;
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+ d[0] = __raw_readl(base + IC_CFG0RD);
+ d[1] = __raw_readl(base + IC_CFG1RD);
+ d[2] = __raw_readl(base + IC_CFG2RD);
+ d[3] = __raw_readl(base + IC_SRCRD);
+ d[4] = __raw_readl(base + IC_ASSIGNRD);
+ d[5] = __raw_readl(base + IC_WAKERD);
+ d[6] = __raw_readl(base + IC_MASKRD);
+ ic_init(base); /* shut it up too while at it */
}
-static int alchemy_ic_resume(struct sys_device *dev)
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
{
- struct alchemy_ic_sysdev *icdev =
- container_of(dev, struct alchemy_ic_sysdev, sysdev);
-
- __raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
- __raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
- __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
- __raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
- __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
- __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
- __raw_writel(0x00000000, icdev->base + IC_TESTBIT);
- wmb();
- __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
- __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
- __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
- __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
- __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
- __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+ ic_init(base);
+
+ __raw_writel(d[0], base + IC_CFG0SET);
+ __raw_writel(d[1], base + IC_CFG1SET);
+ __raw_writel(d[2], base + IC_CFG2SET);
+ __raw_writel(d[3], base + IC_SRCSET);
+ __raw_writel(d[4], base + IC_ASSIGNSET);
+ __raw_writel(d[5], base + IC_WAKESET);
wmb();
- __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+ __raw_writel(d[6], base + IC_MASKSET);
wmb();
+}
+static int alchemy_ic_suspend(void)
+{
+ alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+ alchemy_ic_pmdata);
+ alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+ &alchemy_ic_pmdata[7]);
return 0;
}
-static struct sysdev_class alchemy_ic_sysdev_class = {
- .name = "ic",
+static void alchemy_ic_resume(void)
+{
+ alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+ &alchemy_ic_pmdata[7]);
+ alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+ alchemy_ic_pmdata);
+}
+
+static struct syscore_ops alchemy_ic_syscore_ops = {
.suspend = alchemy_ic_suspend,
.resume = alchemy_ic_resume,
};
-static int __init alchemy_ic_sysdev_init(void)
+static int __init alchemy_ic_pm_init(void)
{
- struct alchemy_ic_sysdev *icdev;
- unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
- int err, i;
-
- err = sysdev_class_register(&alchemy_ic_sysdev_class);
- if (err)
- return err;
-
- for (i = 0; i < 2; i++) {
- icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
- if (!icdev)
- return -ENOMEM;
-
- icdev->base = ioremap(icbase[i], 0x1000);
-
- icdev->sysdev.id = i;
- icdev->sysdev.cls = &alchemy_ic_sysdev_class;
- err = sysdev_register(&icdev->sysdev);
- if (err) {
- kfree(icdev);
- return err;
- }
- }
-
+ register_syscore_ops(&alchemy_ic_syscore_ops);
return 0;
}
-device_initcall(alchemy_ic_sysdev_init);
+device_initcall(alchemy_ic_pm_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9e7814db3d0..3b2c18b1434 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -13,9 +13,10 @@
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
-#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -30,21 +31,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
- if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
- /* power-on sequence as suggested in the databooks */
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
- __raw_writel(1, port->membase + UART_MOD_CNTRL);
- wmb();
- }
- __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
- wmb();
+ alchemy_uart_enable(CPHYSADDR(port->membase));
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
+ alchemy_uart_disable(CPHYSADDR(port->membase));
break;
default:
serial8250_do_pm(port, state, old_state);
@@ -65,38 +57,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
.pm = alchemy_8250_pm, \
}
-static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
- PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
- PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
- PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
-#endif
- { },
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1200] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+ },
};
static struct platform_device au1xx0_uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_AU1X00,
- .dev = {
- .platform_data = au1x00_uart_data,
- },
};
+static void __init alchemy_setup_uarts(int ctype)
+{
+ unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ int s = sizeof(struct plat_serial8250_port);
+ int c = alchemy_get_uarts(ctype);
+ struct plat_serial8250_port *ports;
+
+ ports = kzalloc(s * (c + 1), GFP_KERNEL);
+ if (!ports) {
+ printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ return;
+ }
+ memcpy(ports, au1x00_uart_data[ctype], s * c);
+ au1xx0_uart_device.dev.platform_data = ports;
+
+ /* Fill up uartclk. */
+ for (s = 0; s < c; s++)
+ ports[s].uartclk = uartclk;
+ if (platform_device_register(&au1xx0_uart_device))
+ printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
@@ -269,8 +283,8 @@ extern struct au1xmmc_platform_data au1xmmc_platdata[2];
static struct resource au1200_mmc0_resources[] = {
[0] = {
- .start = SD0_PHYS_ADDR,
- .end = SD0_PHYS_ADDR + 0x7ffff,
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -305,8 +319,8 @@ static struct platform_device au1200_mmc0_device = {
#ifndef CONFIG_MIPS_DB1200
static struct resource au1200_mmc1_resources[] = {
[0] = {
- .start = SD1_PHYS_ADDR,
- .end = SD1_PHYS_ADDR + 0x7ffff,
+ .start = AU1100_SD1_PHYS_ADDR,
+ .end = AU1100_SD1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -359,15 +373,16 @@ static struct platform_device pbdb_smbus_device = {
#endif
/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
#define MAC_RES(_base, _enable, _irq) \
{ \
- .start = CPHYSADDR(_base), \
- .end = CPHYSADDR(_base + 0xffff), \
+ .start = _base, \
+ .end = _base + 0xffff, \
.flags = IORESOURCE_MEM, \
}, \
{ \
- .start = CPHYSADDR(_enable), \
- .end = CPHYSADDR(_enable + 0x3), \
+ .start = _enable, \
+ .end = _enable + 0x3, \
.flags = IORESOURCE_MEM, \
}, \
{ \
@@ -376,19 +391,29 @@ static struct platform_device pbdb_smbus_device = {
.flags = IORESOURCE_IRQ \
}
-static struct resource au1xxx_eth0_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
- MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1100)
- MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
- MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
- MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
-#endif
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1000_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC0_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR,
+ AU1500_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1100_MAC0_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1550_MAC0_DMA_INT)
+ },
};
-
static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
.phy1_search_mac0 = 1,
};
@@ -396,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
static struct platform_device au1xxx_eth0_device = {
.name = "au1000-eth",
.id = 0,
- .num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
- .resource = au1xxx_eth0_resources,
+ .num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth0_platform_data,
};
-#ifndef CONFIG_SOC_AU1100
-static struct resource au1xxx_eth1_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
- MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
- MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
- MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
-#endif
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1000_MAC1_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC1_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR + 4,
+ AU1500_MAC1_DMA_INT)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1550_MAC1_DMA_INT)
+ },
};
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
@@ -419,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
static struct platform_device au1xxx_eth1_device = {
.name = "au1000-eth",
.id = 1,
- .num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
- .resource = au1xxx_eth1_resources,
+ .num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth1_platform_data,
};
-#endif
void __init au1xxx_override_eth_cfg(unsigned int port,
struct au1000_eth_platform_data *eth_data)
@@ -434,15 +463,65 @@ void __init au1xxx_override_eth_cfg(unsigned int port,
if (port == 0)
memcpy(&au1xxx_eth0_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
-#ifndef CONFIG_SOC_AU1100
else
memcpy(&au1xxx_eth1_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
-#endif
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+ int ret, i;
+ unsigned char ethaddr[6];
+ struct resource *macres;
+
+ /* Handle 1st MAC */
+ if (alchemy_get_macs(ctype) < 1)
+ return;
+
+ macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+ return;
+ }
+ memcpy(macres, au1xxx_eth0_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT);
+ au1xxx_eth0_device.resource = macres;
+
+ i = prom_get_ethernet_addr(ethaddr);
+ if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+ memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+ ret = platform_device_register(&au1xxx_eth0_device);
+ if (!ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+ /* Handle 2nd MAC */
+ if (alchemy_get_macs(ctype) < 2)
+ return;
+
+ macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+ return;
+ }
+ memcpy(macres, au1xxx_eth1_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT);
+ au1xxx_eth1_device.resource = macres;
+
+ ethaddr[5] += 1; /* next addr for 2nd MAC */
+ if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+ memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+ /* Register second MAC if enabled in pinfunc */
+ if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
+ ret = platform_device_register(&au1xxx_eth1_device);
+ if (ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+ }
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xx0_uart_device,
&au1xxx_usb_ohci_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
@@ -460,36 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
- &au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
{
- unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int err, i;
- unsigned char ethaddr[6];
+ int err, ctype = alchemy_get_cputype();
- /* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags; i++)
- au1x00_uart_data[i].uartclk = uartclk;
-
- /* use firmware-provided mac addr if available and necessary */
- i = prom_get_ethernet_addr(ethaddr);
- if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
- memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+ alchemy_setup_uarts(ctype);
+ alchemy_setup_macs(ctype);
err = platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
-#ifndef CONFIG_SOC_AU1100
- ethaddr[5] += 1; /* next addr for 2nd MAC */
- if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
- memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
-
- /* Register second MAC if enabled in pinfunc */
- if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
- err = platform_device_register(&au1xxx_eth1_device);
-#endif
-
return err;
}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 561e5da2658..1b887c86841 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -52,8 +52,6 @@ void __init plat_mem_setup(void)
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
- board_setup(); /* board specific setup */
-
if (au1xxx_cpu_needs_config_od())
/* Various early Au1xx0 errata corrected by this */
set_c0_config(1 << 19); /* Set Config[OD] */
@@ -61,6 +59,8 @@ void __init plat_mem_setup(void)
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
+ board_setup(); /* board specific setup */
+
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2fdf98..d5da6adbf63 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int)
goto cntr_err;
/* register counter1 clocksource and event device */
- clocksource_set_clock(&au1x_counter1_clocksource, 32768);
- clocksource_register(&au1x_counter1_clocksource);
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 4a8980027ec..1dac4f27d33 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -23,6 +23,13 @@ void __init board_setup(void)
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
+ /* Set Config[OD] (disable overlapping bus transaction):
+ * This gets rid of a _lot_ of spurious interrupts (especially
+ * wrt. IDE); but incurs ~10% performance hit in some
+ * cpu-bound applications.
+ */
+ set_c0_config(1 << 19);
+
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 05f120ff90f..5c956fe8760 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -127,13 +127,10 @@ const char *get_system_type(void)
void __init board_setup(void)
{
unsigned long bcsr1, bcsr2;
- u32 pin_func;
bcsr1 = DB1000_BCSR_PHYS_ADDR;
bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
- pin_func = 0;
-
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
@@ -164,12 +161,16 @@ void __init board_setup(void)
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* Set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
- au_writel(pin_func, SYS_PINFUNC);
- /* Power off until the driver is in use */
- bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
- BCSR_RESETS_IRDA_MODE_OFF);
+ {
+ u32 pin_func;
+
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+ au_writel(pin_func, SYS_PINFUNC);
+ /* Power off until the driver is in use */
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+ BCSR_RESETS_IRDA_MODE_OFF);
+ }
#endif
bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
@@ -177,31 +178,35 @@ void __init board_setup(void)
alchemy_gpio1_input_enable();
#ifdef CONFIG_MIPS_MIRAGE
- /* GPIO[20] is output */
- alchemy_gpio_direction_output(20, 0);
+ {
+ u32 pin_func;
- /* Set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+ /* GPIO[20] is output */
+ alchemy_gpio_direction_output(20, 0);
- /* Set GPIO[215:211] for LEDs */
- pin_func |= 5 << 2;
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* Set GPIO[214:213] for more LEDs */
- pin_func |= 5 << 12;
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* Set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= SYS_PF_LCD | SYS_PF_PC;
- au_writel(pin_func, SYS_PINFUNC);
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /*
- * Enable speaker amplifier. This should
- * be part of the audio driver.
- */
- alchemy_gpio_direction_output(209, 1);
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
+ au_writel(pin_func, SYS_PINFUNC);
- pm_power_off = mirage_power_off;
- _machine_halt = mirage_power_off;
- _machine_restart = (void(*)(char *))mips_softreset;
+ /*
+ * Enable speaker amplifier. This should
+ * be part of the audio driver.
+ */
+ alchemy_gpio_direction_output(209, 1);
+
+ pm_power_off = mirage_power_off;
+ _machine_halt = mirage_power_off;
+ _machine_restart = (void(*)(char *))mips_softreset;
+ }
#endif
#ifdef CONFIG_MIPS_BOSPORUS
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 2d85c4b5be0..e64fdcbf75d 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -65,7 +65,7 @@ void __init board_setup(void)
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 83f46215eb0..3b4fa320696 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -56,7 +56,7 @@ void __init board_setup(void)
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
/* GPIO201 is input for PCMCIA card detect */
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index baeb2138505..e5306b56da6 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index ad2e3f13793..5f8f0691ed2 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,9 +36,6 @@
#include <prom.h>
-#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR)
-#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR)
-
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
};
@@ -67,18 +64,15 @@ static void gpr_power_off(void)
void __init board_setup(void)
{
- printk(KERN_INFO "Tarpeze ITS GPR board\n");
+ printk(KERN_INFO "Trapeze ITS GPR board\n");
pm_power_off = gpr_power_off;
_machine_halt = gpr_power_off;
_machine_restart = gpr_reset;
- /* Enable UART3 */
- au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
- au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- /* Enable UART1 */
- au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+ /* Enable UART1/3 */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
/* Take away Reset of UMTS-card */
alchemy_gpio_direction_output(215, 1);
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
index f044f4c541d..229aafae680 100644
--- a/arch/mips/alchemy/gpr/init.c
+++ b/arch/mips/alchemy/gpr/init.c
@@ -59,5 +59,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index cf436ab679a..3ae984cf98c 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -87,7 +87,7 @@ void __init board_setup(void)
au_writel(SYS_PF_NI2, SYS_PINFUNC);
/* Initialize GPIO */
- au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index f8d25575fa0..2e81cc7f342 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 956f946218c..55628e390fd 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -53,8 +53,8 @@ static struct platform_device mtx1_button = {
static struct resource mtx1_wdt_res[] = {
[0] = {
- .start = 15,
- .end = 15,
+ .start = 215,
+ .end = 215,
.name = "mtx1-wdt-gpio",
.flags = IORESOURCE_IRQ,
}
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index febfb0fb089..81e57fad07a 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -66,13 +66,10 @@ void __init board_setup(void)
au_writel(pin_func, SYS_PINFUNC);
/* Enable UART */
- au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- mdelay(10);
- au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- mdelay(10);
-
- /* Enable DTR = USB power up */
- au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ /* Enable DTR (MCR bit 0) = USB power up */
+ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+ wmb();
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 15125c2fda7..0ee02cfa989 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -51,14 +51,13 @@ void __init prom_init(void)
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str)
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = 0x04000000;
- else
- strict_strtoul(memsize_str, 0, &memsize);
+
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 07:08:46 +0000