diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/regulator.txt | 54 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 81 | ||||
| -rw-r--r-- | include/linux/regulator/of_regulator.h | 20 |
4 files changed, 156 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt new file mode 100644 index 00000000000..82bef20d4c4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -0,0 +1,54 @@ +Voltage/Current Regulators + +Optional properties: +- regulator-name: A string used as a descriptive name for regulator outputs +- regulator-min-microvolt: smallest voltage consumers may set +- regulator-max-microvolt: largest voltage consumers may set +- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops +- regulator-min-microamp: smallest current consumers may set +- regulator-max-microamp: largest current consumers may set +- regulator-always-on: boolean, regulator should never be disabled +- regulator-boot-on: bootloader/firmware enabled regulator +- <name>-supply: phandle to the parent supply/regulator node + +Example: + + xyzreg: regulator@0 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vin>; + }; + +Regulator Consumers: +Consumer nodes can reference one or more of its supplies/ +regulators using the below bindings. + +- <name>-supply: phandle to the regulator node + +These are the same bindings that a regulator in the above +example used to reference its own supply, in which case +its just seen as a special case of a regulator being a +consumer itself. + +Example of a consumer device node (mmc) referencing two +regulators (twl-reg1 and twl-reg2), + + twl-reg1: regulator@0 { + ... + ... + ... + }; + + twl-reg2: regulator@1 { + ... + ... + ... + }; + + mmc: mmc@0x0 { + ... + ... + vmmc-supply = <&twl-reg1>; + vmmcaux-supply = <&twl-reg2>; + }; diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 55d1b5dc3ae..4043b4d98f0 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_REGULATOR) += core.o dummy.o +obj-$(CONFIG_OF) += of_regulator.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c new file mode 100644 index 00000000000..76673c784ab --- /dev/null +++ b/drivers/regulator/of_regulator.c @@ -0,0 +1,81 @@ +/* + * OF helpers for regulator framework + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/regulator/machine.h> + +static void of_get_regulation_constraints(struct device_node *np, + struct regulator_init_data **init_data) +{ + const __be32 *min_uV, *max_uV, *uV_offset; + const __be32 *min_uA, *max_uA; + struct regulation_constraints *constraints = &(*init_data)->constraints; + + constraints->name = of_get_property(np, "regulator-name", NULL); + + min_uV = of_get_property(np, "regulator-min-microvolt", NULL); + if (min_uV) + constraints->min_uV = be32_to_cpu(*min_uV); + max_uV = of_get_property(np, "regulator-max-microvolt", NULL); + if (max_uV) + constraints->max_uV = be32_to_cpu(*max_uV); + + /* Voltage change possible? */ + if (constraints->min_uV != constraints->max_uV) + constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; + + uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL); + if (uV_offset) + constraints->uV_offset = be32_to_cpu(*uV_offset); + min_uA = of_get_property(np, "regulator-min-microamp", NULL); + if (min_uA) + constraints->min_uA = be32_to_cpu(*min_uA); + max_uA = of_get_property(np, "regulator-max-microamp", NULL); + if (max_uA) + constraints->max_uA = be32_to_cpu(*max_uA); + + /* Current change possible? */ + if (constraints->min_uA != constraints->max_uA) + constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; + + if (of_find_property(np, "regulator-boot-on", NULL)) + constraints->boot_on = true; + + if (of_find_property(np, "regulator-always-on", NULL)) + constraints->always_on = true; + else /* status change should be possible if not always on. */ + constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; +} + +/** + * of_get_regulator_init_data - extract regulator_init_data structure info + * @dev: device requesting for regulator_init_data + * + * Populates regulator_init_data structure by extracting data from device + * tree node, returns a pointer to the populated struture or NULL if memory + * alloc fails. + */ +struct regulator_init_data *of_get_regulator_init_data(struct device *dev) +{ + struct regulator_init_data *init_data; + + if (!dev->of_node) + return NULL; + + init_data = devm_kzalloc(dev, sizeof(*init_data), GFP_KERNEL); + if (!init_data) + return NULL; /* Out of memory? */ + + of_get_regulation_constraints(dev->of_node, &init_data); + return init_data; +} diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h new file mode 100644 index 00000000000..d83a98d3e3f --- /dev/null +++ b/include/linux/regulator/of_regulator.h @@ -0,0 +1,20 @@ +/* + * OpenFirmware regulator support routines + * + */ + +#ifndef __LINUX_OF_REG_H +#define __LINUX_OF_REG_H + +#if defined(CONFIG_OF) +extern struct regulator_init_data + *of_get_regulator_init_data(struct device *dev); +#else +static inline struct regulator_init_data + *of_get_regulator_init_data(struct device *dev) +{ + return NULL; +} +#endif /* CONFIG_OF */ + +#endif /* __LINUX_OF_REG_H */ |