aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-s3c2440/Kconfig1
-rw-r--r--arch/arm/mach-s3c2440/include/mach/gta02.h26
-rw-r--r--arch/arm/mach-s3c64xx/clock.c6
-rw-r--r--arch/arm/mach-s3c64xx/dma.c11
-rw-r--r--arch/arm/mach-s3c64xx/gpiolib.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c13
-rw-r--r--arch/arm/mach-s3c64xx/setup-keypad.c2
-rw-r--r--arch/arm/mach-s3c64xx/setup-sdhci.c2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h4
-rw-r--r--arch/arm/plat-samsung/dev-uart.c2
10 files changed, 41 insertions, 30 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a0cb2581894..50825a3f91c 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -99,6 +99,7 @@ config MACH_NEO1973_GTA02
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
index 953331d8d56..3a56a229cac 100644
--- a/arch/arm/mach-s3c2440/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
@@ -44,19 +44,19 @@
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
-#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
+#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
+#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
+#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
+#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
+#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
+#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index dd378206450..fdfc4d5e37a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -151,6 +151,12 @@ static struct clk init_clocks_off[] = {
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
}, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
+ }, {
.name = "iis",
.id = 0,
.parent = &clk_p,
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 135db1b4125..c35585cf8c4 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -690,12 +690,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
regptr = regs + PL080_Cx_BASE(0);
- for (ch = 0; ch < 8; ch++, chno++, chptr++) {
- printk(KERN_INFO "%s: registering DMA %d (%p)\n",
- __func__, chno, regptr);
+ for (ch = 0; ch < 8; ch++, chptr++) {
+ pr_debug("%s: registering DMA %d (%p)\n",
+ __func__, chno + ch, regptr);
chptr->bit = 1 << ch;
- chptr->number = chno;
+ chptr->number = chno + ch;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL080_Cx_STRIDE;
@@ -704,7 +704,8 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
- printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+ printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
+ irq, regs, chno, chno+8);
return 0;
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index fd99a82e82c..92b09085caa 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -72,7 +72,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
@@ -138,7 +138,7 @@ static struct s3c_gpio_chip gpio_4bit[] = {
},
};
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index e85192a86fb..a80a3163dd3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
@@ -351,7 +352,7 @@ static struct regulator_init_data smdk6410_vddpll = {
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
- .name = "PVDD_UH/PVDD_MMC",
+ .name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
@@ -417,7 +418,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
- .name = "PVDD_INT/PVDD_PLL",
+ .name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
@@ -452,7 +453,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
- .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
@@ -464,7 +465,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
- .name = "PVDD_OTGI/HPVDD/AVDD",
+ .name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
@@ -552,7 +553,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
- .name = "PVDD_MEM/PVDD_GPS",
+ .name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
@@ -563,7 +564,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
- .name = "PVDD_LCD/PVDD_EXT",
+ .name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
index f8ed0d22db7..1d4d0ee9e87 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -17,7 +17,7 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index 1a942037c4e..f344a222bc8 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -56,7 +56,7 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index 5486c8f01f1..adb5f298ead 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -23,7 +23,7 @@
#define S5P6440_GPIO_A_NR (6)
#define S5P6440_GPIO_B_NR (7)
#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (2)
+#define S5P6440_GPIO_F_NR (16)
#define S5P6440_GPIO_G_NR (7)
#define S5P6440_GPIO_H_NR (10)
#define S5P6440_GPIO_I_NR (16)
@@ -36,7 +36,7 @@
#define S5P6450_GPIO_B_NR (7)
#define S5P6450_GPIO_C_NR (8)
#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (2)
+#define S5P6450_GPIO_F_NR (16)
#define S5P6450_GPIO_G_NR (14)
#define S5P6450_GPIO_H_NR (10)
#define S5P6450_GPIO_I_NR (16)
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
index 3776cd95245..5928105490f 100644
--- a/arch/arm/plat-samsung/dev-uart.c
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -15,6 +15,8 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <plat/devs.h>
+
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {