aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-05 15:32:53 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-05 15:32:53 -0700
commitcd3f07d1e6e59fade92a8edaff9315cc534199cf (patch)
treea2f30bccdfad1826a81c098c6766c2a4345fc171 /drivers/scsi
parentdc822e57ee05856291a8c9324d2309076ee5f5e2 (diff)
parentf7c9c6bb14f3104608a3a83cadea10a6943d2804 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands [SCSI] scsi_transport_iscsi: Fix documentation os parameter [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support [SCSI] libfc: improve flogi retries to avoid lport stuck [SCSI] libfc: avoid exchanges collision during lport reset [SCSI] libfc: fix checking FC_TYPE_BLS [SCSI] edd: Treat "XPRS" host bus type the same as "PCI" [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user) [SCSI] isci: revert bcn filtering [SCSI] isci: Fix hard reset timeout conditions. [SCSI] isci: No need to manage the pending reset bit on pending requests. [SCSI] isci: Remove redundant isci_request.ttype field. [SCSI] isci: Fix task management for SMP, SATA and on dev remove. [SCSI] isci: No task_done callbacks in error handler paths. [SCSI] isci: Handle task request timeouts correctly. [SCSI] isci: Fix tag leak in tasks and terminated requests. [SCSI] isci: Immediately fail I/O to removed devices. [SCSI] isci: Lookup device references through requests in completions. [SCSI] ipr: add definitions for additional adapter ...
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc.h5
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc_els.c23
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc_fcoe.c2
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc_io.c37
-rw-r--r--drivers/scsi/device_handler/scsi_dh.c10
-rw-r--r--drivers/scsi/device_handler/scsi_dh_alua.c3
-rw-r--r--drivers/scsi/fcoe/fcoe.c13
-rw-r--r--drivers/scsi/hosts.c9
-rw-r--r--drivers/scsi/hpsa.c221
-rw-r--r--drivers/scsi/hpsa.h10
-rw-r--r--drivers/scsi/hpsa_cmd.h5
-rw-r--r--drivers/scsi/ipr.c2
-rw-r--r--drivers/scsi/ipr.h1
-rw-r--r--drivers/scsi/isci/host.c23
-rw-r--r--drivers/scsi/isci/init.c2
-rw-r--r--drivers/scsi/isci/port.c146
-rw-r--r--drivers/scsi/isci/port.h6
-rw-r--r--drivers/scsi/isci/probe_roms.h4
-rw-r--r--drivers/scsi/isci/remote_device.c85
-rw-r--r--drivers/scsi/isci/remote_device.h5
-rw-r--r--drivers/scsi/isci/request.c52
-rw-r--r--drivers/scsi/isci/request.h6
-rw-r--r--drivers/scsi/isci/task.c698
-rw-r--r--drivers/scsi/isci/task.h35
-rw-r--r--drivers/scsi/libfc/fc_exch.c7
-rw-r--r--drivers/scsi/libfc/fc_lport.c100
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2.h11
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h153
-rw-r--r--drivers/scsi/mpt2sas/mpi/mpi2_ioc.h113
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c247
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.h32
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_config.c67
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.c9
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c634
-rw-r--r--drivers/scsi/mvsas/mv_init.c10
-rw-r--r--drivers/scsi/pmcraid.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c2
-rw-r--r--drivers/scsi/scsi_lib.c9
-rw-r--r--drivers/scsi/scsi_scan.c1
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c2
-rw-r--r--drivers/scsi/sd.c12
-rw-r--r--drivers/scsi/sd.h6
-rw-r--r--drivers/scsi/st.c4
43 files changed, 1751 insertions, 1073 deletions
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 63de1c7cd0c..049ea907e04 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -62,7 +62,7 @@
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
-#define BNX2FC_VERSION "1.0.8"
+#define BNX2FC_VERSION "1.0.9"
#define PFX "bnx2fc: "
@@ -145,6 +145,9 @@
#define REC_RETRY_COUNT 1
#define BNX2FC_NUM_ERR_BITS 63
+#define BNX2FC_RELOGIN_WAIT_TIME 200
+#define BNX2FC_RELOGIN_WAIT_CNT 10
+
/* bnx2fc driver uses only one instance of fcoe_percpu_s */
extern struct fcoe_percpu_s bnx2fc_global;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index fd382fe33f6..ce0ce3e32f3 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -268,17 +268,6 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg)
orig_io_req = cb_arg->aborted_io_req;
srr_req = cb_arg->io_req;
- if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(srr_req, "srr_compl: xid - 0x%x completed",
- orig_io_req->xid);
- goto srr_compl_done;
- }
- if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(srr_req, "rec abts in prog "
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto srr_compl_done;
- }
if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &srr_req->req_flags)) {
/* SRR timedout */
BNX2FC_IO_DBG(srr_req, "srr timed out, abort "
@@ -290,6 +279,12 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg)
"failed. issue cleanup\n");
bnx2fc_initiate_cleanup(srr_req);
}
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+ test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(srr_req, "srr_compl:xid 0x%x flags = %lx",
+ orig_io_req->xid, orig_io_req->req_flags);
+ goto srr_compl_done;
+ }
orig_io_req->srr_retry++;
if (orig_io_req->srr_retry <= SRR_RETRY_COUNT) {
struct bnx2fc_rport *tgt = orig_io_req->tgt;
@@ -311,6 +306,12 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg)
}
goto srr_compl_done;
}
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+ test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(srr_req, "srr_compl:xid - 0x%x flags = %lx",
+ orig_io_req->xid, orig_io_req->req_flags);
+ goto srr_compl_done;
+ }
mp_req = &(srr_req->mp_req);
fc_hdr = &(mp_req->resp_fc_hdr);
resp_len = mp_req->resp_len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 85bcc4b5596..8c6156a10d9 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -22,7 +22,7 @@ DEFINE_PER_CPU(struct bnx2fc_percpu_s, bnx2fc_percpu);
#define DRV_MODULE_NAME "bnx2fc"
#define DRV_MODULE_VERSION BNX2FC_VERSION
-#define DRV_MODULE_RELDATE "Oct 02, 2011"
+#define DRV_MODULE_RELDATE "Oct 21, 2011"
static char version[] __devinitdata =
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 0c64d184d73..84a78af83f9 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1103,7 +1103,10 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
struct fc_rport_libfc_priv *rp = rport->dd_data;
struct bnx2fc_cmd *io_req;
struct fc_lport *lport;
+ struct fc_rport_priv *rdata;
struct bnx2fc_rport *tgt;
+ int logo_issued;
+ int wait_cnt = 0;
int rc = FAILED;
@@ -1192,8 +1195,40 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
} else {
printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
"already in abts processing\n", io_req->xid);
+ if (cancel_delayed_work(&io_req->timeout_work))
+ kref_put(&io_req->refcount,
+ bnx2fc_cmd_release); /* drop timer hold */
+ bnx2fc_initiate_cleanup(io_req);
+
+ spin_unlock_bh(&tgt->tgt_lock);
+
+ wait_for_completion(&io_req->tm_done);
+
+ spin_lock_bh(&tgt->tgt_lock);
+ io_req->wait_for_comp = 0;
+ rdata = io_req->tgt->rdata;
+ logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO,
+ &tgt->flags);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
spin_unlock_bh(&tgt->tgt_lock);
+
+ if (!logo_issued) {
+ BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n",
+ tgt->flags);
+ mutex_lock(&lport->disc.disc_mutex);
+ lport->tt.rport_logoff(rdata);
+ mutex_unlock(&lport->disc.disc_mutex);
+ do {
+ msleep(BNX2FC_RELOGIN_WAIT_TIME);
+ /*
+ * If session not recovered, let SCSI-ml
+ * escalate error recovery.
+ */
+ if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT)
+ return FAILED;
+ } while (!test_bit(BNX2FC_FLAG_SESSION_READY,
+ &tgt->flags));
+ }
return SUCCESS;
}
if (rc == FAILED) {
@@ -1275,6 +1310,8 @@ void bnx2fc_process_cleanup_compl(struct bnx2fc_cmd *io_req,
io_req->refcount.refcount.counter, io_req->cmd_type);
bnx2fc_scsi_done(io_req, DID_ERROR);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
+ if (io_req->wait_for_comp)
+ complete(&io_req->tm_done);
}
void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req,
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 7c05fd9dccf..339ea23a867 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -441,7 +441,15 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
spin_lock_irqsave(q->queue_lock, flags);
sdev = q->queuedata;
- if (sdev && sdev->scsi_dh_data)
+ if (!sdev) {
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ err = SCSI_DH_NOSYS;
+ if (fn)
+ fn(data, err);
+ return err;
+ }
+
+ if (sdev->scsi_dh_data)
scsi_dh = sdev->scsi_dh_data->scsi_dh;
dev = get_device(&sdev->sdev_gendev);
if (!scsi_dh || !dev ||
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 627f4b5e517..fe4df2da309 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -507,7 +507,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
int len, k, off, valid_states = 0;
unsigned char *ucp;
unsigned err;
- unsigned long expiry, interval = 1;
+ unsigned long expiry, interval = 1000;
expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT);
retry:
@@ -734,6 +734,7 @@ static int alua_bus_attach(struct scsi_device *sdev)
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = scsi_dh_data;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);
return 0;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 61384ee4049..cefbe44bb84 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2347,14 +2347,11 @@ static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
goto done;
mac = fr_cb(fp)->granted_mac;
- if (is_zero_ether_addr(mac)) {
- /* pre-FIP */
- if (fcoe_ctlr_recv_flogi(fip, lport, fp)) {
- fc_frame_free(fp);
- return;
- }
- }
- fcoe_update_src_mac(lport, mac);
+ /* pre-FIP */
+ if (is_zero_ether_addr(mac))
+ fcoe_ctlr_recv_flogi(fip, lport, fp);
+ if (!is_zero_ether_addr(mac))
+ fcoe_update_src_mac(lport, mac);
done:
fc_lport_flogi_resp(seq, fp, lport);
}
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 4f7a5829ea4..351dc0b86fa 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -286,6 +286,7 @@ static void scsi_host_dev_release(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev);
struct device *parent = dev->parent;
+ struct request_queue *q;
scsi_proc_hostdir_rm(shost->hostt);
@@ -293,9 +294,11 @@ static void scsi_host_dev_release(struct device *dev)
kthread_stop(shost->ehandler);
if (shost->work_q)
destroy_workqueue(shost->work_q);
- if (shost->uspace_req_q) {
- kfree(shost->uspace_req_q->queuedata);
- scsi_free_queue(shost->uspace_req_q);
+ q = shost->uspace_req_q;
+ if (q) {
+ kfree(q->queuedata);
+ q->queuedata = NULL;
+ scsi_free_queue(q);
}
scsi_destroy_command_freelist(shost);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bbdc9f960a6..e76107b2ade 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -48,6 +48,7 @@
#include <linux/bitmap.h>
#include <linux/atomic.h>
#include <linux/kthread.h>
+#include <linux/jiffies.h>
#include "hpsa_cmd.h"
#include "hpsa.h"
@@ -127,6 +128,10 @@ static struct board_type products[] = {
static int number_of_controllers;
+static struct list_head hpsa_ctlr_list = LIST_HEAD_INIT(hpsa_ctlr_list);
+static spinlock_t lockup_detector_lock;
+static struct task_struct *hpsa_lockup_detector;
+
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
@@ -484,6 +489,7 @@ static struct scsi_host_template hpsa_driver_template = {
#endif
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
+ .max_sectors = 8192,
};
@@ -566,16 +572,16 @@ static int hpsa_find_target_lun(struct ctlr_info *h,
* assumes h->devlock is held
*/
int i, found = 0;
- DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA);
+ DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES);
- memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3);
+ memset(&lun_taken[0], 0, HPSA_MAX_DEVICES >> 3);
for (i = 0; i < h->ndevices; i++) {
if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
set_bit(h->dev[i]->target, lun_taken);
}
- for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) {
+ for (i = 0; i < HPSA_MAX_DEVICES; i++) {
if (!test_bit(i, lun_taken)) {
/* *bus = 1; */
*target = i;
@@ -598,7 +604,7 @@ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
unsigned char addr1[8], addr2[8];
struct hpsa_scsi_dev_t *sd;
- if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) {
+ if (n >= HPSA_MAX_DEVICES) {
dev_err(&h->pdev->dev, "too many devices, some will be "
"inaccessible.\n");
return -1;
@@ -673,7 +679,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
/* assumes h->devlock is held */
- BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
removed[*nremoved] = h->dev[entry];
(*nremoved)++;
@@ -702,7 +708,7 @@ static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
int i;
struct hpsa_scsi_dev_t *sd;
- BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
sd = h->dev[entry];
removed[*nremoved] = h->dev[entry];
@@ -814,10 +820,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
int nadded, nremoved;
struct Scsi_Host *sh = NULL;
- added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
- removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
+ added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
if (!added || !removed) {
dev_warn(&h->pdev->dev, "out of memory in "
@@ -1338,6 +1342,22 @@ static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
wait_for_completion(&wait);
}
+static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ unsigned long flags;
+
+ /* If controller lockup detected, fake a hardware error. */
+ spin_lock_irqsave(&h->lock, flags);
+ if (unlikely(h->lockup_detected)) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ } else {
+ spin_unlock_irqrestore(&h->lock, flags);
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ }
+}
+
static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
struct CommandList *c, int data_direction)
{
@@ -1735,7 +1755,6 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
if (is_scsi_rev_5(h))
return 0; /* p1210m doesn't need to do this. */
-#define MAX_MSA2XXX_ENCLOSURES 32
if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
"enclosures exceeded. Check your hardware "
@@ -1846,8 +1865,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
int raid_ctlr_position;
DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
- currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
+ currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
@@ -1870,6 +1888,13 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
/* Allocate the per device structures */
for (i = 0; i < ndevs_to_allocate; i++) {
+ if (i >= HPSA_MAX_DEVICES) {
+ dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded."
+ " %d devices ignored.\n", HPSA_MAX_DEVICES,
+ ndevs_to_allocate - HPSA_MAX_DEVICES);
+ break;
+ }
+
currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
if (!currentsd[i]) {
dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
@@ -1956,7 +1981,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
default:
break;
}
- if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA)
+ if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
@@ -2048,8 +2073,14 @@ static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
}
memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
- /* Need a lock as this is being allocated from the pool */
spin_lock_irqsave(&h->lock, flags);
+ if (unlikely(h->lockup_detected)) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ cmd->result = DID_ERROR << 16;
+ done(cmd);
+ return 0;
+ }
+ /* Need a lock as this is being allocated from the pool */
c = cmd_alloc(h);
spin_unlock_irqrestore(&h->lock, flags);
if (c == NULL) { /* trouble... */
@@ -2601,7 +2632,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->SG[0].Len = iocommand.buf_size;
c->SG[0].Ext = 0; /* we are not chaining*/
}
- hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (iocommand.buf_size > 0)
hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
@@ -2724,7 +2755,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->SG[i].Ext = 0;
}
}
- hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (sg_used)
hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
@@ -2872,6 +2903,8 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.Timeout = 0;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+ c->Request.CDB[7] = (size >> 8) & 0xFF;
+ c->Request.CDB[8] = size & 0xFF;
break;
case TEST_UNIT_READY:
c->Request.CDBLen = 6;
@@ -3091,6 +3124,7 @@ static irqreturn_t hpsa_intx_discard_completions(int irq, void *dev_id)
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY)
@@ -3110,6 +3144,7 @@ static irqreturn_t hpsa_msix_discard_completions(int irq, void *dev_id)
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY)
raw_tag = next_command(h);
@@ -3126,6 +3161,7 @@ static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
@@ -3146,6 +3182,7 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id)
u32 raw_tag;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
if (hpsa_tag_contains_index(raw_tag))
@@ -4090,6 +4127,149 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
kfree(h);
}
+static void remove_ctlr_from_lockup_detector_list(struct ctlr_info *h)
+{
+ assert_spin_locked(&lockup_detector_lock);
+ if (!hpsa_lockup_detector)
+ return;
+ if (h->lockup_detected)
+ return; /* already stopped the lockup detector */
+ list_del(&h->lockup_list);
+}
+
+/* Called when controller lockup detected. */
+static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list)
+{
+ struct CommandList *c = NULL;
+
+ assert_spin_locked(&h->lock);
+ /* Mark all outstanding commands as failed and complete them. */
+ while (!list_empty(list)) {
+ c = list_entry(list->next, struct CommandList, list);
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ finish_cmd(c, c->Header.Tag.lower);
+ }
+}
+
+static void controller_lockup_detected(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ assert_spin_locked(&lockup_detector_lock);
+ remove_ctlr_from_lockup_detector_list(h);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ spin_lock_irqsave(&h->lock, flags);
+ h->lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ spin_unlock_irqrestore(&h->lock, flags);
+ dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
+ h->lockup_detected);
+ pci_disable_device(h->pdev);
+ spin_lock_irqsave(&h->lock, flags);
+ fail_all_cmds_on_list(h, &h->cmpQ);
+ fail_all_cmds_on_list(h, &h->reqQ);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+#define HEARTBEAT_SAMPLE_INTERVAL (10 * HZ)
+#define HEARTBEAT_CHECK_MINIMUM_INTERVAL (HEARTBEAT_SAMPLE_INTERVAL / 2)
+
+static void detect_controller_lockup(struct ctlr_info *h)
+{
+ u64 now;
+ u32 heartbeat;
+ unsigned long flags;
+
+ assert_spin_locked(&lockup_detector_lock);
+ now = get_jiffies_64();
+ /* If we've received an interrupt recently, we're ok. */
+ if (time_after64(h->last_intr_timestamp +
+ (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+ return;
+
+ /*
+ * If we've already checked the heartbeat recently, we're ok.
+ * This could happen if someone sends us a signal. We
+ * otherwise don't care about signals in this thread.
+ */
+ if (time_after64(h->last_heartbeat_timestamp +
+ (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+ return;
+
+ /* If heartbeat has not changed since we last looked, we're not ok. */
+ spin_lock_irqsave(&h->lock, flags);
+ heartbeat = readl(&h->cfgtable->HeartBeat);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (h->last_heartbeat == heartbeat) {
+ controller_lockup_detected(h);
+ return;
+ }
+
+ /* We're ok. */
+ h->last_heartbeat = heartbeat;
+ h->last_heartbeat_timestamp = now;
+}
+
+static int detect_controller_lockup_thread(void *notused)
+{
+ struct ctlr_info *h;
+ unsigned long flags;
+
+ while (1) {
+ struct list_head *this, *tmp;
+
+ schedule_timeout_interruptible(HEARTBEAT_SAMPLE_INTERVAL);
+ if (kthread_should_stop())
+ break;
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ list_for_each_safe(this, tmp, &hpsa_ctlr_list) {
+ h = list_entry(this, struct ctlr_info, lockup_list);
+ detect_controller_lockup(h);
+ }
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+ }
+ return 0;
+}
+
+static void add_ctlr_to_lockup_detector_list(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ list_add_tail(&h->lockup_list, &hpsa_ctlr_list);
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
+static void start_controller_lockup_detector(struct ctlr_info *h)
+{
+ /* Start the lockup detector thread if not already started */
+ if (!hpsa_lockup_detector) {
+ spin_lock_init(&lockup_detector_lock);
+ hpsa_lockup_detector =
+ kthread_run(detect_controller_lockup_thread,
+ NULL, "hpsa");
+ }
+ if (!hpsa_lockup_detector) {
+ dev_warn(&h->pdev->dev,
+ "Could not start lockup detector thread\n");
+ return;
+ }
+ add_ctlr_to_lockup_detector_list(h);
+}
+
+static void stop_controller_lockup_detector(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ remove_ctlr_from_lockup_detector_list(h);
+ /* If the list of ctlr's to monitor is empty, stop the thread */
+ if (list_empty(&hpsa_ctlr_list)) {
+ kthread_stop(hpsa_lockup_detector);
+ hpsa_lockup_detector = NULL;
+ }
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -4127,7 +4307,6 @@ reinit_after_soft_reset:
return -ENOMEM;
h->pdev = pdev;
- h->busy_initializing = 1;
h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
INIT_LIST_HEAD(&h->cmpQ);
INIT_LIST_HEAD(&h->reqQ);
@@ -4236,7 +4415,7 @@ reinit_after_soft_reset:
hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
- h->busy_initializing = 0;
+ start_controller_lockup_detector(h);
return 1;
clean4:
@@ -4245,7 +4424,6 @@ clean4:
free_irq(h->intr[h->intr_mode], h);
clean2:
clean1:
- h->busy_initializing = 0;
kfree(h);
return rc;
}
@@ -4300,10 +4478,11 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev)
struct ctlr_info *h;
if (pci_get_drvdata(pdev) == NULL) {
- dev_err(&pdev->dev, "unable to remove device \n");
+ dev_err(&pdev->dev, "unable to remove device\n");
return;
}
h = pci_get_drvdata(pdev);
+ stop_controller_lockup_detector(h);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
hpsa_shutdown(pdev);
iounmap(h->vaddr);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 7f53ceaa723..91edafb8c7e 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -95,8 +95,6 @@ struct ctlr_info {
unsigned long *cmd_pool_bits;
int nr_allocs;
int nr_frees;
- int busy_initializing;
- int busy_scanning;
int scan_finished;
spinlock_t scan_lock;
wait_queue_head_t scan_wait_queue;
@@ -104,8 +102,7 @@ struct ctlr_info {
struct Scsi_Host *scsi_host;
spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */
int ndevices; /* number of used elements in .dev[] array. */
-#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
- struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+ struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
/*
* Performant mode tables.
*/
@@ -124,6 +121,11 @@ struct ctlr_info {
unsigned char reply_pool_wraparound;
u32 *blockFetchTable;
unsigned char *hba_inquiry_data;
+ u64 last_intr_timestamp;
+ u32 last_heartbeat;
+ u64 last_heartbeat_timestamp;
+ u32 lockup_detected;
+ struct list_head lockup_list;
};
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 55d741b019d..3fd4715935c 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -123,8 +123,11 @@ union u64bit {
/* FIXME this is a per controller value (barf!) */
#define HPSA_MAX_TARGETS_PER_CTLR 16
-#define HPSA_MAX_LUN 256
+#define HPSA_MAX_LUN 1024
#define HPSA_MAX_PHYS_LUN 1024
+#define MAX_MSA2XXX_ENCLOSURES 32
+#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
+ MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */
/* SCSI-3 Commands */
#pragma pack(1)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 73e24b48dce..fd860d952b2 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9123,6 +9123,8 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = {
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 },
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 6d257e0dd6a..ac84736c1b9 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -82,6 +82,7 @@
#define IPR_SUBS_DEV_ID_57B4 0x033B
#define IPR_SUBS_DEV_ID_57B2 0x035F
+#define IPR_SUBS_DEV_ID_57C3 0x0353
#define IPR_SUBS_DEV_ID_57C4 0x0354
#define IPR_SUBS_DEV_ID_57C6 0x0357
#define IPR_SUBS_DEV_ID_57CC 0x035C
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index f07f30fada1..e7fe9c4c85b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1350,7 +1350,7 @@ static void isci_user_parameters_get(struct sci_user_parameters *u)
u->stp_max_occupancy_timeout = stp_max_occ_to;
u->ssp_max_occupancy_timeout = ssp_max_occ_to;
u->no_outbound_task_timeout = no_outbound_task_to;
- u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+ u->max_concurr_spinup = max_concurr_spinup;
}
static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
@@ -1661,7 +1661,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
/* Default to APC mode. */
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+ ihost->oem_parameters.controller.max_concurr_spin_up = 1;
/* Default to no SSC operation. */
ihost->oem_parameters.controller.do_enable_ssc = false;
@@ -1787,7 +1787,8 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
} else
return -EINVAL;
- if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+ oem->controller.max_concurr_spin_up < 1)
return -EINVAL;
return 0;
@@ -1810,6 +1811,16 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
return SCI_FAILURE_INVALID_STATE;
}
+static u8 max_spin_up(struct isci_host *ihost)
+{
+ if (ihost->user_parameters.max_concurr_spinup)
+ return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+ else
+ return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
static void power_control_timeout(unsigned long data)
{
struct sci_timer *tmr = (struct sci_timer *)data;
@@ -1839,8 +1850,7 @@ static void power_control_timeout(unsigned long data)
if (iphy == NULL)
continue;
- if (ihost->power_control.phys_granted_power >=
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+ if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
break;
ihost->power_control.requesters[i] = NULL;
@@ -1865,8 +1875,7 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
{
BUG_ON(iphy == NULL);
- if (ihost->power_control.phys_granted_power <
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+ if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
ihost->power_control.phys_granted_power++;
sci_phy_consume_power_handler(iphy);
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 43fe840fbe9..a97edabcb85 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -118,7 +118,7 @@ unsigned char phy_gen = 3;
module_param(phy_gen, byte, 0);
MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
-unsigned char max_concurr_spinup = 1;
+unsigned char max_concurr_spinup;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8e59c8865dc..ac7f27749f9 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -145,48 +145,15 @@ static void sci_port_bcn_enable(struct isci_port *iport)
}
}
-/* called under sci_lock to stabilize phy:port associations */
-void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport)
-{
- int i;
-
- clear_bit(IPORT_BCN_BLOCKED, &iport->flags);
- wake_up(&ihost->eventq);
-
- if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags))
- return;
-
- for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
- struct isci_phy *iphy = iport->phy_table[i];
-
- if (!iphy)
- continue;
-
- ihost->sas_ha.notify_port_event(&iphy->sas_phy,
- PORTE_BROADCAST_RCVD);
- break;
- }
-}
-
static void isci_port_bc_change_received(struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy)
{
- if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n",
- __func__, iphy, &iphy->sas_phy);
- set_bit(IPORT_BCN_PENDING, &iport->flags);
- atomic_inc(&iport->event);
- wake_up(&ihost->eventq);
- } else {
- dev_dbg(&ihost->pdev->dev,
- "%s: isci_phy = %p, sas_phy = %p\n",
- __func__, iphy, &iphy->sas_phy);
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_phy = %p, sas_phy = %p\n",
+ __func__, iphy, &iphy->sas_phy);
- ihost->sas_ha.notify_port_event(&iphy->sas_phy,
- PORTE_BROADCAST_RCVD);
- }
+ ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
sci_port_bcn_enable(iport);
}
@@ -278,9 +245,6 @@ static void isci_port_link_down(struct isci_host *isci_host,
/* check to see if this is the last phy on this port. */
if (isci_phy->sas_phy.port &&
isci_phy->sas_phy.port->num_phys == 1) {
- atomic_inc(&isci_port->event);
- isci_port_bcn_enable(isci_host, isci_port);
-
/* change the state for all devices on this port. The
* next task sent to this device will be returned as
* SAS_TASK_UNDELIVERED, and the scsi mid layer will
@@ -350,6 +314,34 @@ static void isci_port_stop_complete(struct isci_host *ihost,
dev_dbg(&ihost->pdev->dev, "Port stop complete\n");
}
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+ switch (state) {
+ case SCI_PORT_READY:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+ enum sci_port_states state)
+{
+ struct sci_base_state_machine *sm = &iport->sm;
+ enum sci_port_states old_state = sm->current_state_id;
+
+ if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+ iport->ready_exit = true;
+
+ sci_change_state(sm, state);
+ iport->ready_exit = false;
+}
+
/**
* isci_port_hard_reset_complete() - This function is called by the sci core
* when the hard reset complete notification has been received.
@@ -368,6 +360,26 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port,
/* Save the status of the hard reset from the port. */
isci_port->hard_reset_status = completion_status;
+ if (completion_status != SCI_SUCCESS) {
+
+ /* The reset failed. The port state is now SCI_PORT_FAILED. */
+ if (isci_port->active_phy_mask == 0) {
+
+ /* Generate the link down now to the host, since it
+ * was intercepted by the hard reset state machine when
+ * it really happened.
+ */
+ isci_port_link_down(isci_port->isci_host,
+ &isci_port->isci_host->phys[
+ isci_port->last_active_phy],
+ isci_port);
+ }
+ /* Advance the port state so that link state changes will be
+ * noticed.
+ */
+ port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
+
+ }
complete_all(&isci_port->hard_reset_complete);
}
@@ -657,6 +669,8 @@ void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy,
struct isci_host *ihost = iport->owning_controller;
iport->active_phy_mask &= ~(1 << iphy->phy_index);
+ if (!iport->active_phy_mask)
+ iport->last_active_phy = iphy->phy_index;
iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
@@ -683,33 +697,6 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i
}
}
-static bool is_port_ready_state(enum sci_port_states state)
-{
- switch (state) {
- case SCI_PORT_READY:
- case SCI_PORT_SUB_WAITING:
- case SCI_PORT_SUB_OPERATIONAL:
- case SCI_PORT_SUB_CONFIGURING:
- return true;
- default:
- return false;
- }
-}
-
-/* flag dummy rnc hanling when exiting a ready state */
-static void port_state_machine_change(struct isci_port *iport,
- enum sci_port_states state)
-{
- struct sci_base_state_machine *sm = &iport->sm;
- enum sci_port_states old_state = sm->current_state_id;
-
- if (is_port_ready_state(old_state) && !is_port_ready_state(state))
- iport->ready_exit = true;
-
- sci_change_state(sm, state);
- iport->ready_exit = false;
-}
-
/**
* sci_port_general_link_up_handler - phy can be assigned to port?
* @sci_port: sci_port object for which has a phy that has gone link up.
@@ -1622,7 +1609,8 @@ void sci_port_construct(struct isci_port *iport, u8 index,
iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
iport->physical_port_index = index;
iport->active_phy_mask = 0;
- iport->ready_exit = false;
+ iport->last_active_phy = 0;
+ iport->ready_exit = false;
iport->owning_controller = ihost;
@@ -1648,7 +1636,6 @@ void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index)
init_completion(&iport->start_complete);
iport->isci_host = ihost;
isci_port_change_state(iport, isci_freed);
- atomic_set(&iport->event, 0);
}
/**
@@ -1676,7 +1663,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
{
unsigned long flags;
enum sci_status status;
- int idx, ret = TMF_RESP_FUNC_COMPLETE;
+ int ret = TMF_RESP_FUNC_COMPLETE;
dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
__func__, iport);
@@ -1697,8 +1684,13 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
"%s: iport = %p; hard reset completion\n",
__func__, iport);
- if (iport->hard_reset_status != SCI_SUCCESS)
+ if (iport->hard_reset_status != SCI_SUCCESS) {
ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset failed (0x%x)\n",
+ __func__, iport, iport->hard_reset_status);
+ }
} else {
ret = TMF_RESP_FUNC_FAILED;
@@ -1718,18 +1710,6 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
"%s: iport = %p; hard reset failed "
"(0x%x) - driving explicit link fail for all phys\n",
__func__, iport, iport->hard_reset_status);
-
- /* Down all phys in the port. */
- spin_lock_irqsave(&ihost->scic_lock, flags);
- for (idx = 0; idx < SCI_MAX_PHYS; ++idx) {
- struct isci_phy *iphy = iport->phy_table[idx];
-
- if (!iphy)
- continue;
- sci_phy_stop(iphy);
- sci_phy_start(iphy);
- }
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
return ret;
}
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
index b50ecd4e8f9..cb5ffbc3860 100644
--- a/drivers/scsi/isci/port.h
+++ b/drivers/scsi/isci/port.h
@@ -77,7 +77,6 @@ enum isci_status {
/**
* struct isci_port - isci direct attached sas port object
- * @event: counts bcns and port stop events (for bcn filtering)
* @ready_exit: several states constitute 'ready'. When exiting ready we
* need to take extra port-teardown actions that are
* skipped when exiting to another 'ready' state.
@@ -92,10 +91,6 @@ enum isci_status {
*/
struct isci_port {
enum isci_status status;
- #define IPORT_BCN_BLOCKED 0
- #define IPORT_BCN_PENDING 1
- unsigned long flags;
- atomic_t event;
struct isci_host *isci_host;
struct asd_sas_port sas_port;
struct list_head remote_dev_list;
@@ -109,6 +104,7 @@ struct isci_port {
u8 logical_port_index;
u8 physical_port_index;
u8 active_phy_mask;
+ u8 last_active_phy;
u16 reserved_rni;
u16 reserved_tag;
u32 started_request_count;
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index dc007e692f4..2c75248ca32 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -112,7 +112,7 @@ struct sci_user_parameters {
* This field specifies the maximum number of direct attached devices
* that can have power supplied to them simultaneously.
*/
- u8 max_number_concurrent_device_spin_up;
+ u8 max_concurr_spinup;
/**
* This field specifies the number of seconds to allow a phy to consume
@@ -219,7 +219,7 @@ struct sci_bios_oem_param_block_hdr {
struct sci_oem_params {
struct {
uint8_t mode_type;
- uint8_t max_concurrent_dev_spin_up;
+ uint8_t max_concurr_spin_up;
uint8_t do_enable_ssc;
uint8_t reserved;
} controller;
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index fbf9ce28c3f..b207cd3b15a 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1438,88 +1438,3 @@ int isci_remote_device_found(struct domain_device *domain_dev)
return status == SCI_SUCCESS ? 0 : -ENODEV;
}
-/**
- * isci_device_is_reset_pending() - This function will check if there is any
- * pending reset condition on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-bool isci_device_is_reset_pending(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device)
-{
- struct isci_request *isci_request;
- struct isci_request *tmp_req;
- bool reset_is_pending = false;
- unsigned long flags;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p\n", __func__, isci_device);
-
- spin_lock_irqsave(&isci_host->scic_lock, flags);
-
- /* Check for reset on all pending requests. */
- list_for_each_entry_safe(isci_request, tmp_req,
- &isci_device->reqs_in_process, dev_node) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p request = %p\n",
- __func__, isci_device, isci_request);
-
- if (isci_request->ttype == io_task) {
- struct sas_task *task = isci_request_access_task(
- isci_request);
-
- spin_lock(&task->task_state_lock);
- if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
- reset_is_pending = true;
- spin_unlock(&task->task_state_lock);
- }
- }
-
- spin_unlock_irqrestore(&isci_host->scic_lock, flags);
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p reset_is_pending = %d\n",
- __func__, isci_device, reset_is_pending);
-
- return reset_is_pending;
-}
-
-/**
- * isci_device_clear_reset_pending() - This function will clear if any pending
- * reset condition flags on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev)
-{
- struct isci_request *isci_request;
- struct isci_request *tmp_req;
- unsigned long flags = 0;
-
- dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n",
- __func__, idev, ihost);
-
- spin_lock_irqsave(&ihost->scic_lock, flags);
-
- /* Clear reset pending on all pending requests. */
- list_for_each_entry_safe(isci_request, tmp_req,
- &idev->reqs_in_process, dev_node) {
- dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n",
- __func__, idev, isci_request);
-
- if (isci_request->ttype == io_task) {
-
- unsigned long flags2;
- struct sas_task *task = isci_request_access_task(
- isci_request);
-
- spin_lock_irqsave(&task->task_state_lock, flags2);
- task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
- spin_unlock_irqrestore(&task->task_state_lock, flags2);
- }
- }
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
-}
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index e1747ea0d0e..483ee50152f 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -132,10 +132,7 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost,
struct isci_remote_device *idev);
void isci_remote_device_gone(struct domain_device *domain_dev);
int isci_remote_device_found(struct domain_device *domain_dev);
-bool isci_device_is_reset_pending(struct isci_host *ihost,
- struct isci_remote_device *idev);
-void isci_device_clear_reset_pending(struct isci_host *ihost,
- struct isci_remote_device *idev);
+
/**
* sci_remote_device_stop() - This method will stop both transmission and
* reception of link activity for the supplied remote device. This method
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 565a9f0a9bc..192cb48d849 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -191,7 +191,7 @@ static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq)
task_iu->task_func = isci_tmf->tmf_code;
task_iu->task_tag =
- (ireq->ttype == tmf_task) ?
+ (test_bit(IREQ_TMF, &ireq->flags)) ?
isci_tmf->io_tag :
SCI_CONTROLLER_INVALID_IO_TAG;
}
@@ -516,7 +516,7 @@ sci_io_request_construct_sata(struct isci_request *ireq,
struct domain_device *dev = ireq->target_device->domain_dev;
/* check for management protocols */
- if (ireq->ttype == tmf_task) {
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
if (tmf->tmf_code == isci_tmf_sata_srst_high ||
@@ -632,7 +632,7 @@ enum sci_status sci_task_request_construct_sata(struct isci_request *ireq)
enum sci_status status = SCI_SUCCESS;
/* check for management protocols */
- if (ireq->ttype == tmf_task) {
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
if (tmf->tmf_code == isci_tmf_sata_srst_high ||
@@ -2630,14 +2630,8 @@ static void isci_task_save_for_upper_layer_completion(
switch (task_notification_selection) {
case isci_perform_normal_io_completion:
-
/* Normal notification (task_done) */
- dev_dbg(&host->pdev->dev,
- "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
+
/* Add to the completed list. */
list_add(&request->completed_node,
&host->requests_to_complete);
@@ -2650,13 +2644,6 @@ static void isci_task_save_for_upper_layer_completion(
/* No notification to libsas because this request is
* already in the abort path.
*/
- dev_dbg(&host->pdev->dev,
- "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
-
/* Wake up whatever process was waiting for this
* request to complete.
*/
@@ -2673,30 +2660,22 @@ static void isci_task_save_for_upper_layer_completion(
case isci_perform_error_io_completion:
/* Use sas_task_abort */
- dev_dbg(&host->pdev->dev,
- "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
/* Add to the aborted list. */
list_add(&request->completed_node,
&host->requests_to_errorback);
break;
default:
- dev_dbg(&host->pdev->dev,
- "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
-
/* Add to the error to libsas list. */
list_add(&request->completed_node,
&host->requests_to_errorback);
break;
}
+ dev_dbg(&host->pdev->dev,
+ "%s: %d - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__, task_notification_selection, task,
+ (task) ? task->task_status.resp : 0, response,
+ (task) ? task->task_status.stat : 0, status);
}
static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
@@ -2728,9 +2707,9 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
struct sas_task *task = isci_request_access_task(request);
struct ssp_response_iu *resp_iu;
unsigned long task_flags;
- struct isci_remote_device *idev = isci_lookup_device(task->dev);
- enum service_response response = SAS_TASK_UNDELIVERED;
- enum exec_status status = SAS_ABORTED_TASK;
+ struct isci_remote_device *idev = request->target_device;
+ enum service_response response = SAS_TASK_UNDELIVERED;
+ enum exec_status status = SAS_ABORTED_TASK;
enum isci_request_status request_status;
enum isci_completion_selection complete_to_host
= isci_perform_normal_io_completion;
@@ -3061,7 +3040,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
/* complete the io request to the core. */
sci_controller_complete_io(ihost, request->target_device, request);
- isci_put_device(idev);
/* set terminated handle so it cannot be completed or
* terminated again, and to cause any calls into abort
@@ -3080,7 +3058,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
/* XXX as hch said always creating an internal sas_task for tmf
* requests would simplify the driver
*/
- task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;
+ task = (test_bit(IREQ_TMF, &ireq->flags)) ? NULL : isci_request_access_task(ireq);
/* all unaccelerated request types (non ssp or ncq) handled with
* substates
@@ -3564,7 +3542,7 @@ static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost,
ireq = isci_request_from_tag(ihost, tag);
ireq->ttype_ptr.io_task_ptr = task;
- ireq->ttype = io_task;
+ clear_bit(IREQ_TMF, &ireq->flags);
task->lldd_task = ireq;
return ireq;
@@ -3578,7 +3556,7 @@ struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost,
ireq = isci_request_from_tag(ihost, tag);
ireq->ttype_ptr.tmf_task_ptr = isci_tmf;
- ireq->ttype = tmf_task;
+ set_bit(IREQ_TMF, &ireq->flags);
return ireq;
}
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index f720b97b7bb..be38933dd6d 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -77,11 +77,6 @@ enum isci_request_status {
dead = 0x07
};
-enum task_type {
- io_task = 0,
- tmf_task = 1
-};
-
enum sci_request_protocol {
SCIC_NO_PROTOCOL,
SCIC_SMP_PROTOCOL,
@@ -116,7 +111,6 @@ struct isci_request {
#define IREQ_ACTIVE 3
unsigned long flags;
/* XXX kill ttype and ttype_ptr, allocate full sas_task */
- enum task_type ttype;
union ttype_ptr_union {
struct sas_task *io_task_ptr; /* When ttype==io_task */
struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index e2d9418683c..66ad3dc8949 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -212,16 +212,27 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /* Indicate QUEUE_FULL so that the scsi
- * midlayer retries. if the request
- * failed for remote device reasons,
- * it gets returned as
- * SAS_TASK_UNDELIVERED next time
- * through.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
+ if (test_bit(IDEV_GONE, &idev->flags)) {
+
+ /* Indicate that the device
+ * is gone.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else {
+ /* Indicate QUEUE_FULL so that
+ * the scsi midlayer retries.
+ * If the request failed for
+ * remote device reasons, it
+ * gets returned as
+ * SAS_TASK_UNDELIVERED next
+ * time through.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ }
}
}
}
@@ -243,7 +254,7 @@ static enum sci_status isci_sata_management_task_request_build(struct isci_reque
struct isci_tmf *isci_tmf;
enum sci_status status;
- if (tmf_task != ireq->ttype)
+ if (!test_bit(IREQ_TMF, &ireq->flags))
return SCI_FAILURE;
isci_tmf = isci_request_access_tmf(ireq);
@@ -327,6 +338,60 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost,
return ireq;
}
+/**
+* isci_request_mark_zombie() - This function must be called with scic_lock held.
+*/
+static void isci_request_mark_zombie(struct isci_host *ihost, struct isci_request *ireq)
+{
+ struct completion *tmf_completion = NULL;
+ struct completion *req_completion;
+
+ /* Set the request state to "dead". */
+ ireq->status = dead;
+
+ req_completion = ireq->io_request_completion;
+ ireq->io_request_completion = NULL;
+
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
+ /* Break links with the TMF request. */
+ struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+
+ /* In the case where a task request is dying,
+ * the thread waiting on the complete will sit and
+ * timeout unless we wake it now. Since the TMF
+ * has a default error status, complete it here
+ * to wake the waiting thread.
+ */
+ if (tmf) {
+ tmf_completion = tmf->complete;
+ tmf->complete = NULL;
+ }
+ ireq->ttype_ptr.tmf_task_ptr = NULL;
+ dev_dbg(&ihost->pdev->dev, "%s: tmf_code %d, managed tag %#x\n",
+ __func__, tmf->tmf_code, tmf->io_tag);
+ } else {
+ /* Break links with the sas_task - the callback is done
+ * elsewhere.
+ */
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ if (task)
+ task->lldd_task = NULL;
+
+ ireq->ttype_ptr.io_task_ptr = NULL;
+ }
+
+ dev_warn(&ihost->pdev->dev, "task context unrecoverable (tag: %#x)\n",
+ ireq->io_tag);
+
+ /* Don't force waiting threads to timeout. */
+ if (req_completion)
+ complete(req_completion);
+
+ if (tmf_completion != NULL)
+ complete(tmf_completion);
+}
+
static int isci_task_execute_tmf(struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_tmf *tmf, unsigned long timeout_ms)
@@ -364,6 +429,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
/* Assign the pointer to the TMF's completion kernel wait structure. */
tmf->complete = &completion;
+ tmf->status = SCI_FAILURE_TIMEOUT;
ireq = isci_task_request_build(ihost, idev, tag, tmf);
if (!ireq)
@@ -399,18 +465,35 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
msecs_to_jiffies(timeout_ms));
if (timeleft == 0) {
+ /* The TMF did not complete - this could be because
+ * of an unplug. Terminate the TMF request now.
+ */
spin_lock_irqsave(&ihost->scic_lock, flags);
if (tmf->cb_state_func != NULL)
- tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data);
+ tmf->cb_state_func(isci_tmf_timed_out, tmf,
+ tmf->cb_data);
- sci_controller_terminate_request(ihost,
- idev,
- ireq);
+ sci_controller_terminate_request(ihost, idev, ireq);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- wait_for_completion(tmf->complete);
+ timeleft = wait_for_completion_timeout(
+ &completion,
+ msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
+
+ if (!timeleft) {
+ /* Strange condition - the termination of the TMF
+ * request timed-out.
+ */
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ /* If the TMF status has not changed, kill it. */
+ if (tmf->status == SCI_FAILURE_TIMEOUT)
+ isci_request_mark_zombie(ihost, ireq);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
}
isci_print_tmf(tmf);
@@ -501,48 +584,17 @@ static enum isci_request_status isci_task_validate_request_to_abort(
return old_state;
}
-/**
-* isci_request_cleanup_completed_loiterer() - This function will take care of
-* the final cleanup on any request which has been explicitly terminated.
-* @isci_host: This parameter specifies the ISCI host object
-* @isci_device: This is the device to which the request is pending.
-* @isci_request: This parameter specifies the terminated request object.
-* @task: This parameter is the libsas I/O request.
-*/
-static void isci_request_cleanup_completed_loiterer(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device,
- struct isci_request *isci_request,
- struct sas_task *task)
+static int isci_request_is_dealloc_managed(enum isci_request_status stat)
{
- unsigned long flags;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device=%p, request=%p, task=%p\n",
- __func__, isci_device, isci_request, task);
-
- if (task != NULL) {
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- task->lldd_task = NULL;
-
- task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
-
- isci_set_task_doneflags(task);
-
- /* If this task is not in the abort path, call task_done. */
- if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- task->task_done(task);
- } else
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- }
-
- if (isci_request != NULL) {
- spin_lock_irqsave(&isci_host->scic_lock, flags);
- list_del_init(&isci_request->dev_node);
- spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+ switch (stat) {
+ case aborted:
+ case aborting:
+ case terminating:
+ case completed:
+ case dead:
+ return true;
+ default:
+ return false;
}
}
@@ -563,11 +615,9 @@ static void isci_terminate_request_core(struct isci_host *ihost,
enum sci_status status = SCI_SUCCESS;
bool was_terminated = false;
bool needs_cleanup_handling = false;
- enum isci_request_status request_status;
unsigned long flags;
unsigned long termination_completed = 1;
struct completion *io_request_completion;
- struct sas_task *task;
dev_dbg(&ihost->pdev->dev,
"%s: device = %p; request = %p\n",
@@ -577,10 +627,6 @@ static void isci_terminate_request_core(struct isci_host *ihost,
io_request_completion = isci_request->io_request_completion;
- task = (isci_request->ttype == io_task)
- ? isci_request_access_task(isci_request)
- : NULL;
-
/* Note that we are not going to control
* the target to abort the request.
*/
@@ -619,42 +665,27 @@ static void isci_terminate_request_core(struct isci_host *ihost,
__func__, isci_request, io_request_completion);
/* Wait here for the request to complete. */
- #define TERMINATION_TIMEOUT_MSEC 500
termination_completed
= wait_for_completion_timeout(
io_request_completion,
- msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC));
+ msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
if (!termination_completed) {
/* The request to terminate has timed out. */
- spin_lock_irqsave(&ihost->scic_lock,
- flags);
+ spin_lock_irqsave(&ihost->scic_lock, flags);
/* Check for state changes. */
- if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) {
+ if (!test_bit(IREQ_TERMINATED,
+ &isci_request->flags)) {
/* The best we can do is to have the
* request die a silent death if it
* ever really completes.
- *
- * Set the request state to "dead",
- * and clear the task pointer so that
- * an actual completion event callback
- * doesn't do anything.
*/
- isci_request->status = dead;
- isci_request->io_request_completion
- = NULL;
-
- if (isci_request->ttype == io_task) {
-
- /* Break links with the
- * sas_task.
- */
- isci_request->ttype_ptr.io_task_ptr
- = NULL;
- }
+ isci_request_mark_zombie(ihost,
+ isci_request);
+ needs_cleanup_handling = true;
} else
termination_completed = 1;
@@ -691,29 +722,28 @@ static void isci_terminate_request_core(struct isci_host *ihost,
* needs to be detached and freed here.
*/
spin_lock_irqsave(&isci_request->state_lock, flags);
- request_status = isci_request->status;
-
- if ((isci_request->ttype == io_task) /* TMFs are in their own thread */
- && ((request_status == aborted)
- || (request_status == aborting)
- || (request_status == terminating)
- || (request_status == completed)
- || (request_status == dead)
- )
- ) {
-
- /* The completion routine won't free a request in
- * the aborted/aborting/etc. states, so we do
- * it here.
- */
- needs_cleanup_handling = true;
- }
+
+ needs_cleanup_handling
+ = isci_request_is_dealloc_managed(
+ isci_request->status);
+
spin_unlock_irqrestore(&isci_request->state_lock, flags);
}
- if (needs_cleanup_handling)
- isci_request_cleanup_completed_loiterer(
- ihost, idev, isci_request, task);
+ if (needs_cleanup_handling) {
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: cleanup isci_device=%p, request=%p\n",
+ __func__, idev, isci_request);
+
+ if (isci_request != NULL) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ isci_free_tag(ihost, isci_request->io_tag);
+ isci_request_change_state(isci_request, unallocated);
+ list_del_init(&isci_request->dev_node);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+ }
}
}
@@ -772,7 +802,9 @@ void isci_terminate_pending_requests(struct isci_host *ihost,
dev_dbg(&ihost->pdev->dev,
"%s: idev=%p request=%p; task=%p old_state=%d\n",
__func__, idev, ireq,
- ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL,
+ (!test_bit(IREQ_TMF, &ireq->flags)
+ ? isci_request_access_task(ireq)
+ : NULL),
old_state);
/* If the old_state is started:
@@ -889,22 +921,14 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun)
"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
__func__, domain_device, isci_host, isci_device);
- if (isci_device)
- set_bit(IDEV_EH, &isci_device->flags);
+ if (!isci_device) {
+ /* If the device is gone, stop the escalations. */
+ dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__);
- /* If there is a device reset pending on any request in the
- * device's list, fail this LUN reset request in order to
- * escalate to the device reset.
- */
- if (!isci_device ||
- isci_device_is_reset_pending(isci_host, isci_device)) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: No dev (%p), or "
- "RESET PENDING: domain_device=%p\n",
- __func__, isci_device, domain_device);
- ret = TMF_RESP_FUNC_FAILED;
+ ret = TMF_RESP_FUNC_COMPLETE;
goto out;
}
+ set_bit(IDEV_EH, &isci_device->flags);
/* Send the task management part of the reset. */
if (sas_protocol_ata(domain_device->tproto)) {
@@ -1013,7 +1037,7 @@ int isci_task_abort_task(struct sas_task *task)
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
- bool any_dev_reset = false;
+ int perform_termination = 0;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
@@ -1035,89 +1059,34 @@ int isci_task_abort_task(struct sas_task *task)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: task = %p\n", __func__, task);
-
- if (!isci_device || !old_request)
- goto out;
-
- set_bit(IDEV_EH, &isci_device->flags);
-
- /* This version of the driver will fail abort requests for
- * SATA/STP. Failing the abort request this way will cause the
- * SCSI error handler thread to escalate to LUN reset
- */
- if (sas_protocol_ata(task->task_proto)) {
- dev_dbg(&isci_host->pdev->dev,
- " task %p is for a STP/SATA device;"
- " returning TMF_RESP_FUNC_FAILED\n"
- " to cause a LUN reset...\n", task);
- goto out;
- }
+ "%s: dev = %p, task = %p, old_request == %p\n",
+ __func__, isci_device, task, old_request);
- dev_dbg(&isci_host->pdev->dev,
- "%s: old_request == %p\n", __func__, old_request);
-
- any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
-
- spin_lock_irqsave(&task->task_state_lock, flags);
-
- any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
+ if (isci_device)
+ set_bit(IDEV_EH, &isci_device->flags);
- /* If the extraction of the request reference from the task
- * failed, then the request has been completed (or if there is a
- * pending reset then this abort request function must be failed
- * in order to escalate to the target reset).
+ /* Device reset conditions signalled in task_state_flags are the
+ * responsbility of libsas to observe at the start of the error
+ * handler thread.
*/
- if ((old_request == NULL) || any_dev_reset) {
-
- /* If the device reset task flag is set, fail the task
- * management request. Otherwise, the original request
- * has completed.
- */
- if (any_dev_reset) {
-
- /* Turn off the task's DONE to make sure this
- * task is escalated to a target reset.
- */
- task->task_state_flags &= ~SAS_TASK_STATE_DONE;
-
- /* Make the reset happen as soon as possible. */
- task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- /* Fail the task management request in order to
- * escalate to the target reset.
- */
- ret = TMF_RESP_FUNC_FAILED;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: Failing task abort in order to "
- "escalate to target reset because\n"
- "SAS_TASK_NEED_DEV_RESET is set for "
- "task %p on dev %p\n",
- __func__, task, isci_device);
-
-
- } else {
- /* The request has already completed and there
- * is nothing to do here other than to set the task
- * done bit, and indicate that the task abort function
- * was sucessful.
- */
- isci_set_task_doneflags(task);
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (!isci_device || !old_request) {
+ /* The request has already completed and there
+ * is nothing to do here other than to set the task
+ * done bit, and indicate that the task abort function
+ * was sucessful.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
- ret = TMF_RESP_FUNC_COMPLETE;
+ ret = TMF_RESP_FUNC_COMPLETE;
- dev_dbg(&isci_host->pdev->dev,
- "%s: abort task not needed for %p\n",
- __func__, task);
- }
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: abort task not needed for %p\n",
+ __func__, task);
goto out;
- } else {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
}
spin_lock_irqsave(&isci_host->scic_lock, flags);
@@ -1146,24 +1115,44 @@ int isci_task_abort_task(struct sas_task *task)
goto out;
}
if (task->task_proto == SAS_PROTOCOL_SMP ||
+ sas_protocol_ata(task->task_proto) ||
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: SMP request (%d)"
+ "%s: %s request"
" or complete_in_target (%d), thus no TMF\n",
- __func__, (task->task_proto == SAS_PROTOCOL_SMP),
+ __func__,
+ ((task->task_proto == SAS_PROTOCOL_SMP)
+ ? "SMP"
+ : (sas_protocol_ata(task->task_proto)
+ ? "SATA/STP"
+ : "<other>")
+ ),
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
- /* Set the state on the task. */
- isci_task_all_done(task);
-
- ret = TMF_RESP_FUNC_COMPLETE;
+ if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ } else {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ }
- /* Stopping and SMP devices are not sent a TMF, and are not
- * reset, but the outstanding I/O request is terminated below.
+ /* STP and SMP devices are not sent a TMF, but the
+ * outstanding I/O request is terminated below. This is
+ * because SATA/STP and SMP discovery path timeouts directly
+ * call the abort task interface for cleanup.
*/
+ perform_termination = 1;
+
} else {
/* Fill in the tmf stucture */
isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
@@ -1172,22 +1161,24 @@ int isci_task_abort_task(struct sas_task *task)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
- #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
ISCI_ABORT_TASK_TIMEOUT_MS);
- if (ret != TMF_RESP_FUNC_COMPLETE)
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ perform_termination = 1;
+ else
dev_dbg(&isci_host->pdev->dev,
- "%s: isci_task_send_tmf failed\n",
- __func__);
+ "%s: isci_task_send_tmf failed\n", __func__);
}
- if (ret == TMF_RESP_FUNC_COMPLETE) {
+ if (perform_termination) {
set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
/* Clean up the request on our side, and wait for the aborted
* I/O to complete.
*/
- isci_terminate_request_core(isci_host, isci_device, old_request);
+ isci_terminate_request_core(isci_host, isci_device,
+ old_request);
}
/* Make sure we do not leave a reference to aborted_io_completion */
@@ -1288,7 +1279,8 @@ isci_task_request_complete(struct isci_host *ihost,
enum sci_task_status completion_status)
{
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
- struct completion *tmf_complete;
+ struct completion *tmf_complete = NULL;
+ struct completion *request_complete = ireq->io_request_completion;
dev_dbg(&ihost->pdev->dev,
"%s: request = %p, status=%d\n",
@@ -1296,255 +1288,53 @@ isci_task_request_complete(struct isci_host *ihost,
isci_request_change_state(ireq, completed);
- tmf->status = completion_status;
set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
- if (tmf->proto == SAS_PROTOCOL_SSP) {
- memcpy(&tmf->resp.resp_iu,
- &ireq->ssp.rsp,
- SSP_RESP_IU_MAX_SIZE);
- } else if (tmf->proto == SAS_PROTOCOL_SATA) {
- memcpy(&tmf->resp.d2h_fis,
- &ireq->stp.rsp,
- sizeof(struct dev_to_host_fis));
+ if (tmf) {
+ tmf->status = completion_status;
+
+ if (tmf->proto == SAS_PROTOCOL_SSP) {
+ memcpy(&tmf->resp.resp_iu,
+ &ireq->ssp.rsp,
+ SSP_RESP_IU_MAX_SIZE);
+ } else if (tmf->proto == SAS_PROTOCOL_SATA) {
+ memcpy(&tmf->resp.d2h_fis,
+ &ireq->stp.rsp,
+ sizeof(struct dev_to_host_fis));
+ }
+ /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+ tmf_complete = tmf->complete;
}
-
- /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
- tmf_complete = tmf->complete;
-
sci_controller_complete_io(ihost, ireq->target_device, ireq);
/* set the 'terminated' flag handle to make sure it cannot be terminated
* or completed again.
*/
set_bit(IREQ_TERMINATED, &ireq->flags);
- isci_request_change_state(ireq, unallocated);
- list_del_init(&ireq->dev_node);
-
- /* The task management part completes last. */
- complete(tmf_complete);
-}
-
-static void isci_smp_task_timedout(unsigned long _task)
-{
- struct sas_task *task = (void *) _task;
- unsigned long flags;
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
- task->task_state_flags |= SAS_TASK_STATE_ABORTED;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- complete(&task->completion);
-}
-
-static void isci_smp_task_done(struct sas_task *task)
-{
- if (!del_timer(&task->timer))
- return;
- complete(&task->completion);
-}
-
-static int isci_smp_execute_task(struct isci_host *ihost,
- struct domain_device *dev, void *req,
- int req_size, void *resp, int resp_size)
-{
- int res, retry;
- struct sas_task *task = NULL;
-
- for (retry = 0; retry < 3; retry++) {
- task = sas_alloc_task(GFP_KERNEL);
- if (!task)
- return -ENOMEM;
-
- task->dev = dev;
- task->task_proto = dev->tproto;
- sg_init_one(&task->smp_task.smp_req, req, req_size);
- sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
-
- task->task_done = isci_smp_task_done;
-
- task->timer.data = (unsigned long) task;
- task->timer.function = isci_smp_task_timedout;
- task->timer.expires = jiffies + 10*HZ;
- add_timer(&task->timer);
-
- res = isci_task_execute_task(task, 1, GFP_KERNEL);
-
- if (res) {
- del_timer(&task->timer);
- dev_dbg(&ihost->pdev->dev,
- "%s: executing SMP task failed:%d\n",
- __func__, res);
- goto ex_err;
- }
-
- wait_for_completion(&task->completion);
- res = -ECOMM;
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: smp task timed out or aborted\n",
- __func__);
- isci_task_abort_task(task);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: SMP task aborted and not done\n",
- __func__);
- goto ex_err;
- }
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAM_STAT_GOOD) {
- res = 0;
- break;
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAS_DATA_UNDERRUN) {
- /* no error, but return the number of bytes of
- * underrun */
- res = task->task_status.residual;
- break;
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAS_DATA_OVERRUN) {
- res = -EMSGSIZE;
- break;
- } else {
- dev_dbg(&ihost->pdev->dev,
- "%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __func__,
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat);
- sas_free_task(task);
- task = NULL;
- }
- }
-ex_err:
- BUG_ON(retry == 3 && task != NULL);
- sas_free_task(task);
- return res;
-}
-
-#define DISCOVER_REQ_SIZE 16
-#define DISCOVER_RESP_SIZE 56
-
-int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost,
- struct domain_device *dev,
- int phy_id, int *adt)
-{
- struct smp_resp *disc_resp;
- u8 *disc_req;
- int res;
-
- disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL);
- if (!disc_resp)
- return -ENOMEM;
-
- disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL);
- if (disc_req) {
- disc_req[0] = SMP_REQUEST;
- disc_req[1] = SMP_DISCOVER;
- disc_req[9] = phy_id;
- } else {
- kfree(disc_resp);
- return -ENOMEM;
- }
- res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE,
- disc_resp, DISCOVER_RESP_SIZE);
- if (!res) {
- if (disc_resp->result != SMP_RESP_FUNC_ACC)
- res = disc_resp->result;
- else
- *adt = disc_resp->disc.attached_dev_type;
+ /* As soon as something is in the terminate path, deallocation is
+ * managed there. Note that the final non-managed state of a task
+ * request is "completed".
+ */
+ if ((ireq->status == completed) ||
+ !isci_request_is_dealloc_managed(ireq->status)) {
+ isci_request_change_state(ireq, unallocated);
+ isci_free_tag(ihost, ireq->io_tag);
+ list_del_init(&ireq->dev_node);
}
- kfree(disc_req);
- kfree(disc_resp);
-
- return res;
-}
-
-static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num)
-{
- struct domain_device *dev = idev->domain_dev;
- struct isci_port *iport = idev->isci_port;
- struct isci_host *ihost = iport->isci_host;
- int res, iteration = 0, attached_device_type;
- #define STP_WAIT_MSECS 25000
- unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS);
- unsigned long deadline = jiffies + tmo;
- enum {
- SMP_PHYWAIT_PHYDOWN,
- SMP_PHYWAIT_PHYUP,
- SMP_PHYWAIT_DONE
- } phy_state = SMP_PHYWAIT_PHYDOWN;
-
- /* While there is time, wait for the phy to go away and come back */
- while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) {
- int event = atomic_read(&iport->event);
-
- ++iteration;
-
- tmo = wait_event_timeout(ihost->eventq,
- event != atomic_read(&iport->event) ||
- !test_bit(IPORT_BCN_BLOCKED, &iport->flags),
- tmo);
- /* link down, stop polling */
- if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags))
- break;
- dev_dbg(&ihost->pdev->dev,
- "%s: iport %p, iteration %d,"
- " phase %d: time_remaining %lu, bcns = %d\n",
- __func__, iport, iteration, phy_state,
- tmo, test_bit(IPORT_BCN_PENDING, &iport->flags));
-
- res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num,
- &attached_device_type);
- tmo = deadline - jiffies;
-
- if (res) {
- dev_dbg(&ihost->pdev->dev,
- "%s: iteration %d, phase %d:"
- " SMP error=%d, time_remaining=%lu\n",
- __func__, iteration, phy_state, res, tmo);
- break;
- }
- dev_dbg(&ihost->pdev->dev,
- "%s: iport %p, iteration %d,"
- " phase %d: time_remaining %lu, bcns = %d, "
- "attdevtype = %x\n",
- __func__, iport, iteration, phy_state,
- tmo, test_bit(IPORT_BCN_PENDING, &iport->flags),
- attached_device_type);
-
- switch (phy_state) {
- case SMP_PHYWAIT_PHYDOWN:
- /* Has the device gone away? */
- if (!attached_device_type)
- phy_state = SMP_PHYWAIT_PHYUP;
-
- break;
-
- case SMP_PHYWAIT_PHYUP:
- /* Has the device come back? */
- if (attached_device_type)
- phy_state = SMP_PHYWAIT_DONE;
- break;
-
- case SMP_PHYWAIT_DONE:
- break;
- }
+ /* "request_complete" is set if the task was being terminated. */
+ if (request_complete)
+ complete(request_complete);
- }
- dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__);
+ /* The task management part completes last. */
+ if (tmf_complete)
+ complete(tmf_complete);
}
static int isci_reset_device(struct isci_host *ihost,
struct isci_remote_device *idev)
{
struct sas_phy *phy = sas_find_local_phy(idev->domain_dev);
- struct isci_port *iport = idev->isci_port;
enum sci_status status;
unsigned long flags;
int rc;
@@ -1564,13 +1354,6 @@ static int isci_reset_device(struct isci_host *ihost,
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- /* Make sure all pending requests are able to be fully terminated. */
- isci_device_clear_reset_pending(ihost, idev);
-
- /* If this is a device on an expander, disable BCN processing. */
- if (!scsi_is_sas_phy_local(phy))
- set_bit(IPORT_BCN_BLOCKED, &iport->flags);
-
rc = sas_phy_reset(phy, true);
/* Terminate in-progress I/O now. */
@@ -1581,21 +1364,6 @@ static int isci_reset_device(struct isci_host *ihost,
status = sci_remote_device_reset_complete(idev);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- /* If this is a device on an expander, bring the phy back up. */
- if (!scsi_is_sas_phy_local(phy)) {
- /* A phy reset will cause the device to go away then reappear.
- * Since libsas will take action on incoming BCNs (eg. remove
- * a device going through an SMP phy-control driven reset),
- * we need to wait until the phy comes back up before letting
- * discovery proceed in libsas.
- */
- isci_wait_for_smp_phy_reset(idev, phy->number);
-
- spin_lock_irqsave(&ihost->scic_lock, flags);
- isci_port_bcn_enable(ihost, idev->isci_port);
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
- }
-
if (status != SCI_SUCCESS) {
dev_dbg(&ihost->pdev->dev,
"%s: sci_remote_device_reset_complete(%p) "
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index 15b18d15899..bc78c0a41d5 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -58,6 +58,8 @@
#include <scsi/sas_ata.h>
#include "host.h"
+#define ISCI_TERMINATION_TIMEOUT_MSEC 500
+
struct isci_request;
/**
@@ -224,35 +226,6 @@ enum isci_completion_selection {
isci_perform_error_io_completion /* Use sas_task_abort */
};
-static inline void isci_set_task_doneflags(
- struct sas_task *task)
-{
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- task->task_state_flags |= SAS_TASK_STATE_DONE;
- task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
- task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-}
-/**
- * isci_task_all_done() - This function clears the task bits to indicate the
- * LLDD is done with the task.
- *
- *
- */
-static inline void isci_task_all_done(
- struct sas_task *task)
-{
- unsigned long flags;
-
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- spin_lock_irqsave(&task->task_state_lock, flags);
- isci_set_task_doneflags(task);
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-}
-
/**
* isci_task_set_completion_status() - This function sets the completion status
* for the request.
@@ -334,7 +307,9 @@ isci_task_set_completion_status(
/* Fall through to the normal case... */
case isci_perform_normal_io_completion:
/* Normal notification (task_done) */
- isci_set_task_doneflags(task);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
break;
default:
WARN_ONCE(1, "unknown task_notification_selection: %d\n",
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 7c055fdca45..1b22130035d 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -469,6 +469,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
struct fc_frame_header *fh = fc_frame_header_get(fp);
int error;
u32 f_ctl;
+ u8 fh_type = fh->fh_type;
ep = fc_seq_exch(sp);
WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT);
@@ -493,7 +494,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
*/
error = lport->tt.frame_send(lport, fp);
- if (fh->fh_type == FC_TYPE_BLS)
+ if (fh_type == FC_TYPE_BLS)
return error;
/*
@@ -1792,6 +1793,9 @@ restart:
goto restart;
}
}
+ pool->next_index = 0;
+ pool->left = FC_XID_UNKNOWN;
+ pool->right = FC_XID_UNKNOWN;
spin_unlock_bh(&pool->lock);
}
@@ -2280,6 +2284,7 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport,
goto free_mempool;
for_each_possible_cpu(cpu) {
pool = per_cpu_ptr(mp->pool, cpu);
+ pool->next_index = 0;
pool->left = FC_XID_UNKNOWN;
pool->right = FC_XID_UNKNOWN;
spin_lock_init(&pool->lock);
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 628f347404f..2cb12b9cd3e 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1030,16 +1030,8 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
FCH_EVT_LIPRESET, 0);
fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
- if (lport->link_up) {
- /*
- * Wait upto resource allocation time out before
- * doing re-login since incomplete FIP exchanged
- * from last session may collide with exchanges
- * in new session.
- */
- msleep(lport->r_a_tov);
+ if (lport->link_up)
fc_lport_enter_flogi(lport);
- }
}
/**
@@ -1481,6 +1473,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
void *lp_arg)
{
struct fc_lport *lport = lp_arg;
+ struct fc_frame_header *fh;
struct fc_els_flogi *flp;
u32 did;
u16 csp_flags;
@@ -1508,49 +1501,56 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
goto err;
}
+ fh = fc_frame_header_get(fp);
did = fc_frame_did(fp);
- if (fc_frame_payload_op(fp) == ELS_LS_ACC && did) {
- flp = fc_frame_payload_get(fp, sizeof(*flp));
- if (flp) {
- mfs = ntohs(flp->fl_csp.sp_bb_data) &
- FC_SP_BB_DATA_MASK;
- if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
- mfs < lport->mfs)
- lport->mfs = mfs;
- csp_flags = ntohs(flp->fl_csp.sp_features);
- r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
- e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
- if (csp_flags & FC_SP_FT_EDTR)
- e_d_tov /= 1000000;
-
- lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
-
- if ((csp_flags & FC_SP_FT_FPORT) == 0) {
- if (e_d_tov > lport->e_d_tov)
- lport->e_d_tov = e_d_tov;
- lport->r_a_tov = 2 * e_d_tov;
- fc_lport_set_port_id(lport, did, fp);
- printk(KERN_INFO "host%d: libfc: "
- "Port (%6.6x) entered "
- "point-to-point mode\n",
- lport->host->host_no, did);
- fc_lport_ptp_setup(lport, fc_frame_sid(fp),
- get_unaligned_be64(
- &flp->fl_wwpn),
- get_unaligned_be64(
- &flp->fl_wwnn));
- } else {
- lport->e_d_tov = e_d_tov;
- lport->r_a_tov = r_a_tov;
- fc_host_fabric_name(lport->host) =
- get_unaligned_be64(&flp->fl_wwnn);
- fc_lport_set_port_id(lport, did, fp);
- fc_lport_enter_dns(lport);
- }
- }
- } else {
- FC_LPORT_DBG(lport, "FLOGI RJT or bad response\n");
+ if (fh->fh_r_ctl != FC_RCTL_ELS_REP || did == 0 ||
+ fc_frame_payload_op(fp) != ELS_LS_ACC) {
+ FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
fc_lport_error(lport, fp);
+ goto err;
+ }
+
+ flp = fc_frame_payload_get(fp, sizeof(*flp));
+ if (!flp) {
+ FC_LPORT_DBG(lport, "FLOGI bad response\n");
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
+ mfs = ntohs(flp->fl_csp.sp_bb_data) &
+ FC_SP_BB_DATA_MASK;
+ if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
+ mfs < lport->mfs)
+ lport->mfs = mfs;
+ csp_flags = ntohs(flp->fl_csp.sp_features);
+ r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
+ e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
+ if (csp_flags & FC_SP_FT_EDTR)
+ e_d_tov /= 1000000;
+
+ lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
+
+ if ((csp_flags & FC_SP_FT_FPORT) == 0) {
+ if (e_d_tov > lport->e_d_tov)
+ lport->e_d_tov = e_d_tov;
+ lport->r_a_tov = 2 * e_d_tov;
+ fc_lport_set_port_id(lport, did, fp);
+ printk(KERN_INFO "host%d: libfc: "
+ "Port (%6.6x) entered "
+ "point-to-point mode\n",
+ lport->host->host_no, did);
+ fc_lport_ptp_setup(lport, fc_frame_sid(fp),
+ get_unaligned_be64(
+ &flp->fl_wwpn),
+ get_unaligned_be64(
+ &flp->fl_wwnn));
+ } else {
+ lport->e_d_tov = e_d_tov;
+ lport->r_a_tov = r_a_tov;
+ fc_host_fabric_name(lport->host) =
+ get_unaligned_be64(&flp->fl_wwnn);
+ fc_lport_set_port_id(lport, did, fp);
+ fc_lport_enter_dns(lport);
}
out:
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 3105d5e8d90..8dc1b32918d 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.18
+ * mpi2.h Version: 02.00.20
*
* Version History
* ---------------
@@ -66,6 +66,9 @@
* 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -91,7 +94,7 @@
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x12)
+#define MPI2_HEADER_VERSION_UNIT (0x14)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -515,6 +518,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
/* Power Management Control */
#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
+/* Send Host Message */
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
/* beginning of product-specific range */
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
/* end of product-specific range */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 61475a6480e..cfd95b4e300 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.17
+ * mpi2_cnfg.h Version: 02.00.19
*
* Version History
* ---------------
@@ -134,6 +134,12 @@
* to MPI2_CONFIG_PAGE_IO_UNIT_7.
* Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
* and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ * Added IO Unit Page 8, IO Unit Page 9,
+ * and IO Unit Page 10.
+ * Added SASNotifyPrimitiveMasks field to
+ * MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
* --------------------------------------------------------------------------
*/
@@ -329,7 +335,9 @@ typedef struct _MPI2_CONFIG_REQUEST
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
+ U8 Reserved2; /* 0x0C */
+ U8 ProxyVF_ID; /* 0x0D */
+ U16 Reserved4; /* 0x0E */
U32 Reserved3; /* 0x10 */
MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
U32 PageAddress; /* 0x18 */
@@ -915,6 +923,120 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
+/* IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+ U16 Flags; /* 0x00 */
+ U16 Reserved1; /* 0x02 */
+ U16
+ Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
+ U32 Reserved2; /* 0x0C */
+ U32 Reserved3; /* 0x10 */
+ U32 Reserved4; /* 0x14 */
+} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
+Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
+
+/* defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x04 */
+ U32 Reserved2; /* 0x08 */
+ U8 NumSensors; /* 0x0C */
+ U8 PollingInterval; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_IOUNIT8_SENSOR
+ Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
+
+
+/* IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+ U16 CurrentTemperature; /* 0x00 */
+ U16 Reserved1; /* 0x02 */
+ U8 Flags; /* 0x04 */
+ U8 Reserved2; /* 0x05 */
+ U16 Reserved3; /* 0x06 */
+ U32 Reserved4; /* 0x08 */
+ U32 Reserved5; /* 0x0C */
+} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
+Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
+
+/* defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x04 */
+ U32 Reserved2; /* 0x08 */
+ U8 NumSensors; /* 0x0C */
+ U8 Reserved4; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_IOUNIT9_SENSOR
+ Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
+
+
+/* IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+ U8 CreditPercent; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
+Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U8 NumFunctions; /* 0x04 */
+ U8 Reserved1; /* 0x05 */
+ U16 Reserved2; /* 0x06 */
+ U32 Reserved3; /* 0x08 */
+ U32 Reserved4; /* 0x0C */
+ MPI2_IOUNIT10_FUNCTION
+ Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
+
/****************************************************************************
@@ -1022,12 +1144,12 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_7
U32 Reserved1; /* 0x04 */
U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
U16 SASBroadcastPrimitiveMasks; /* 0x18 */
- U16 Reserved2; /* 0x1A */
+ U16 SASNotifyPrimitiveMasks; /* 0x1A */
U32 Reserved3; /* 0x1C */
} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
-#define MPI2_IOCPAGE7_PAGEVERSION (0x01)
+#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
/* IOC Page 8 */
@@ -2070,16 +2192,16 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
/* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001)
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
@@ -2266,6 +2388,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
/* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 1f0c190d336..93d9b6956d0 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.16
+ * mpi2_ioc.h Version: 02.00.17
*
* Version History
* ---------------
@@ -104,6 +104,12 @@
* 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
* Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
* 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
+ * SASNotifyPrimitiveMasks field to
+ * MPI2_EVENT_NOTIFICATION_REQUEST.
+ * Added Temperature Threshold Event.
+ * Added Host Message Event.
+ * Added Send Host Message request and reply.
* --------------------------------------------------------------------------
*/
@@ -421,7 +427,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
U32 Reserved6; /* 0x10 */
U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
U16 SASBroadcastPrimitiveMasks; /* 0x24 */
- U16 Reserved7; /* 0x26 */
+ U16 SASNotifyPrimitiveMasks; /* 0x26 */
U32 Reserved8; /* 0x28 */
} MPI2_EVENT_NOTIFICATION_REQUEST,
MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
@@ -476,6 +482,9 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
#define MPI2_EVENT_SAS_QUIESCE (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE (0x0028)
/* Log Entry Added Event data */
@@ -507,6 +516,39 @@ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
+/* Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+ U16 Status; /* 0x00 */
+ U8 SensorNum; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U16 CurrentTemperature; /* 0x04 */
+ U16 Reserved2; /* 0x06 */
+ U32 Reserved3; /* 0x08 */
+ U32 Reserved4; /* 0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
+Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
+
+/* Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
+
+
+/* Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+ U8 SourceVF_ID; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 Reserved3; /* 0x04 */
+ U32 HostData[1]; /* 0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
+
+
/* Hard Reset Received Event data */
typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
@@ -749,6 +791,24 @@ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
+/* SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+ U8 PhyNum; /* 0x00 */
+ U8 Port; /* 0x01 */
+ U8 Reserved1; /* 0x02 */
+ U8 Primitive; /* 0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+Mpi2EventDataSasNotifyPrimitive_t,
+MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
+
+/* defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
+
/* SAS Initiator Device Status Change Event data */
@@ -1001,6 +1061,53 @@ typedef struct _MPI2_EVENT_ACK_REPLY
/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/* SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+ U16 HostDataLength; /* 0x00 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved1; /* 0x04 */
+ U8 Reserved2; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U8 Reserved4; /* 0x0C */
+ U8 DestVF_ID; /* 0x0D */
+ U16 Reserved5; /* 0x0E */
+ U32 Reserved6; /* 0x10 */
+ U32 Reserved7; /* 0x14 */
+ U32 Reserved8; /* 0x18 */
+ U32 Reserved9; /* 0x1C */
+ U32 Reserved10; /* 0x20 */
+ U32 HostData[1]; /* 0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
+
+
+/* SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+ U16 HostDataLength; /* 0x00 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved1; /* 0x04 */
+ U8 Reserved2; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U16 Reserved4; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
+
+
+/****************************************************************************
* FWDownload message
****************************************************************************/
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 81209ca8727..beda04a8404 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -81,6 +81,15 @@ static int missing_delay[2] = {-1, -1};
module_param_array(missing_delay, int, NULL, 0);
MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+static int mpt2sas_fwfault_debug;
+MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
+ "and halt firmware - (default=0)");
+
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
/* diag_buffer_enable is bitwise
* bit 0 set = TRACE
* bit 1 set = SNAPSHOT
@@ -93,14 +102,6 @@ module_param(diag_buffer_enable, int, 0);
MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
"(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
- "and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
/**
* _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
*
@@ -691,6 +692,7 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
}
ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
+
complete(&ioc->base_cmds.done);
return 1;
}
@@ -3470,6 +3472,58 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
/**
+ * mpt2sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+ return 1;
+
+ if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
+ return 1;
+
+ ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
+ if (mpi_reply) {
+ ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
+ memcpy(ioc->port_enable_cmds.reply, mpi_reply,
+ mpi_reply->MsgLength*4);
+ }
+ ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
+
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ ioc->port_enable_failed = 1;
+
+ if (ioc->is_driver_loading) {
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ mpt2sas_port_enable_complete(ioc);
+ return 1;
+ } else {
+ ioc->start_scan_failed = ioc_status;
+ ioc->start_scan = 0;
+ return 1;
+ }
+ }
+ complete(&ioc->port_enable_cmds.done);
+ return 1;
+}
+
+
+/**
* _base_send_port_enable - send port_enable(discovery stuff) to firmware
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3480,67 +3534,151 @@ static int
_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2PortEnableRequest_t *mpi_request;
- u32 ioc_state;
+ Mpi2PortEnableReply_t *mpi_reply;
unsigned long timeleft;
int r = 0;
u16 smid;
+ u16 ioc_status;
printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
- if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
ioc->name, __func__);
return -EAGAIN;
}
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
return -EAGAIN;
}
- ioc->base_cmds.status = MPT2_CMD_PENDING;
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
+ ioc->port_enable_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
+ init_completion(&ioc->port_enable_cmds.done);
mpt2sas_base_put_smid_default(ioc, smid);
- init_completion(&ioc->base_cmds.done);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+ timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
300*HZ);
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
+ if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2PortEnableRequest_t)/4);
- if (ioc->base_cmds.status & MPT2_CMD_RESET)
+ if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
r = -EFAULT;
else
r = -ETIME;
goto out;
- } else
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
- ioc->name, __func__));
+ }
+ mpi_reply = ioc->port_enable_cmds.reply;
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
- 60, sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
- " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
+ ioc->name, __func__, ioc_status);
r = -EFAULT;
+ goto out;
}
out:
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- printk(MPT2SAS_INFO_FMT "port enable: %s\n",
- ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+ printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+ "SUCCESS" : "FAILED"));
return r;
}
/**
+ * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ u16 smid;
+
+ printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ mpt2sas_base_put_smid_default(ioc, smid);
+ return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
+{
+ /* We wait for discovery to complete if IR firmware is loaded.
+ * The sas topology events arrive before PD events, so we need time to
+ * turn on the bit in ioc->pd_handles to indicate PD
+ * Also, it maybe required to report Volumes ahead of physical
+ * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+ */
+ if (ioc->ir_firmware)
+ return 1;
+
+ /* if no Bios, then we don't need to wait */
+ if (!ioc->bios_pg3.BiosVersion)
+ return 0;
+
+ /* Bios is present, then we drop down here.
+ *
+ * If there any entries in the Bios Page 2, then we wait
+ * for discovery to complete.
+ */
+
+ /* Current Boot Device */
+ if ((ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Request Boot Device */
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Alternate Request Boot Device */
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+ return 0;
+
+ return 1;
+}
+
+
+/**
* _base_unmask_events - turn on notification for this event
* @ioc: per adapter object
* @event: firmware event
@@ -3962,6 +4100,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
skip_init_reply_post_host_index:
_base_unmask_interrupts(ioc);
+
r = _base_event_notification(ioc, sleep_flag);
if (r)
return r;
@@ -3969,7 +4108,18 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
- if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
+
+ if (ioc->is_driver_loading) {
+
+
+
+ ioc->wait_for_discovery_to_complete =
+ _base_determine_wait_on_discovery(ioc);
+ return r; /* scan_start and scan_finished support */
+ }
+
+
+ if (ioc->wait_for_discovery_to_complete && ioc->is_warpdrive) {
if (ioc->manu_pg10.OEMIdentifier == 0x80) {
hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
MFG_PAGE10_HIDE_SSDS_MASK);
@@ -3978,13 +4128,6 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
}
- if (ioc->wait_for_port_enable_to_complete) {
- if (diag_buffer_enable != 0)
- mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
- if (disable_discovery > 0)
- return r;
- }
-
r = _base_send_port_enable(ioc, sleep_flag);
if (r)
return r;
@@ -4121,6 +4264,10 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+ /* port_enable command bits */
+ ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+
/* transport internal command bits */
ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
@@ -4162,8 +4309,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
goto out_free_resources;
}
- init_completion(&ioc->shost_recovery_done);
-
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
ioc->event_masks[i] = -1;
@@ -4186,7 +4331,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
_base_update_missing_delay(ioc, missing_delay[0],
missing_delay[1]);
- mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
@@ -4204,6 +4348,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
kfree(ioc->scsih_cmds.reply);
kfree(ioc->config_cmds.reply);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->pfacts);
@@ -4243,6 +4388,7 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->scsih_cmds.reply);
@@ -4284,6 +4430,20 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
complete(&ioc->base_cmds.done);
}
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ ioc->port_enable_failed = 1;
+ ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
+ mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+ if (ioc->is_driver_loading) {
+ ioc->start_scan_failed =
+ MPI2_IOCSTATUS_INTERNAL_ERROR;
+ ioc->start_scan = 0;
+ ioc->port_enable_cmds.status =
+ MPT2_CMD_NOT_USED;
+ } else
+ complete(&ioc->port_enable_cmds.done);
+
+ }
if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
ioc->config_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
@@ -4349,7 +4509,6 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
{
int r;
unsigned long flags;
- u8 pe_complete = ioc->wait_for_port_enable_to_complete;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
@@ -4396,7 +4555,8 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
/* If this hard reset is called while port enable is active, then
* there is no reason to call make_ioc_operational
*/
- if (pe_complete) {
+ if (ioc->is_driver_loading && ioc->port_enable_failed) {
+ ioc->remove_host = 1;
r = -EFAULT;
goto out;
}
@@ -4410,7 +4570,6 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->ioc_reset_in_progress_status = r;
ioc->shost_recovery = 0;
- complete(&ioc->shost_recovery_done);
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 59354dba68c..3c3babc7d26 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "09.100.00.01"
-#define MPT2SAS_MAJOR_VERSION 09
+#define MPT2SAS_DRIVER_VERSION "10.100.00.00"
+#define MPT2SAS_MAJOR_VERSION 10
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 01
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
@@ -655,7 +655,12 @@ enum mutex_type {
* @ignore_loginfos: ignore loginfos during task management
* @remove_host: flag for when driver unloads, to avoid sending dev resets
* @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_port_enable_to_complete:
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ * waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
* @msix_enable: flag indicating msix is enabled
* @msix_vector_count: number msix vectors
* @cpu_msix_table: table for mapping cpus to msix index
@@ -790,15 +795,20 @@ struct MPT2SAS_ADAPTER {
u8 shost_recovery;
struct mutex reset_in_progress_mutex;
- struct completion shost_recovery_done;
spinlock_t ioc_reset_in_progress_lock;
u8 ioc_link_reset_in_progress;
- int ioc_reset_in_progress_status;
+ u8 ioc_reset_in_progress_status;
u8 ignore_loginfos;
u8 remove_host;
u8 pci_error_recovery;
- u8 wait_for_port_enable_to_complete;
+ u8 wait_for_discovery_to_complete;
+ struct completion port_enable_done;
+ u8 is_driver_loading;
+ u8 port_enable_failed;
+
+ u8 start_scan;
+ u16 start_scan_failed;
u8 msix_enable;
u16 msix_vector_count;
@@ -814,11 +824,13 @@ struct MPT2SAS_ADAPTER {
u8 scsih_cb_idx;
u8 ctl_cb_idx;
u8 base_cb_idx;
+ u8 port_enable_cb_idx;
u8 config_cb_idx;
u8 tm_tr_cb_idx;
u8 tm_tr_volume_cb_idx;
u8 tm_sas_control_cb_idx;
struct _internal_cmd base_cmds;
+ struct _internal_cmd port_enable_cmds;
struct _internal_cmd transport_cmds;
struct _internal_cmd scsih_cmds;
struct _internal_cmd tm_cmds;
@@ -1001,6 +1013,8 @@ void mpt2sas_base_release_callback_handler(u8 cb_idx);
u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
+u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+ u8 msix_index, u32 reply);
void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
@@ -1015,6 +1029,8 @@ void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_ty
void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
+int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
+
/* scsih shared API */
u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
u32 reply);
@@ -1032,6 +1048,8 @@ struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAP
struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
+void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
+
void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
/* config shared API */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 2b1101076cf..36ea0b2d802 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -1356,6 +1356,9 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
Mpi2ConfigReply_t mpi_reply;
int r, i, config_page_sz;
u16 ioc_status;
+ int config_num;
+ u16 element_type;
+ u16 phys_disk_dev_handle;
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
@@ -1371,35 +1374,53 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
if (r)
goto out;
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
config_page = kmalloc(config_page_sz, GFP_KERNEL);
- if (!config_page)
- goto out;
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- config_page_sz);
- if (r)
+ if (!config_page) {
+ r = -1;
goto out;
-
- r = -1;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < config_page->NumElements; i++) {
- if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) &
- MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) !=
- MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT)
- continue;
- if (le16_to_cpu(config_page->ConfigElement[i].
- PhysDiskDevHandle) == pd_handle) {
- *volume_handle = le16_to_cpu(config_page->
- ConfigElement[i].VolDevHandle);
- r = 0;
+ }
+ config_num = 0xff;
+ while (1) {
+ mpi_request.PageAddress = cpu_to_le32(config_num +
+ MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
+ r = _config_request(ioc, &mpi_request, &mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ config_page_sz);
+ if (r)
+ goto out;
+ r = -1;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
goto out;
+ for (i = 0; i < config_page->NumElements; i++) {
+ element_type = le16_to_cpu(config_page->
+ ConfigElement[i].ElementFlags) &
+ MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
+ if (element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
+ element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
+ phys_disk_dev_handle =
+ le16_to_cpu(config_page->ConfigElement[i].
+ PhysDiskDevHandle);
+ if (phys_disk_dev_handle == pd_handle) {
+ *volume_handle =
+ le16_to_cpu(config_page->
+ ConfigElement[i].VolDevHandle);
+ r = 0;
+ goto out;
+ }
+ } else if (element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
+ *volume_handle = 0;
+ r = 0;
+ goto out;
+ }
}
+ config_num = config_page->ConfigNum;
}
out:
kfree(config_page);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 9adb0133d6f..aabcb911706 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1207,6 +1207,9 @@ _ctl_do_reset(void __user *arg)
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
+ return -EAGAIN;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
@@ -2178,7 +2181,8 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg)
!ioc)
return -ENODEV;
- if (ioc->shost_recovery || ioc->pci_error_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
return -EAGAIN;
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
@@ -2297,7 +2301,8 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- if (ioc->shost_recovery || ioc->pci_error_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
return -EAGAIN;
memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 1da1aa1a11e..8889b1babca 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -71,6 +71,9 @@ static void _firmware_event_work(struct work_struct *work);
static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
+static void _scsih_scan_start(struct Scsi_Host *shost);
+static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
+
/* global parameters */
LIST_HEAD(mpt2sas_ioc_list);
@@ -79,6 +82,7 @@ static u8 scsi_io_cb_idx = -1;
static u8 tm_cb_idx = -1;
static u8 ctl_cb_idx = -1;
static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
static u8 transport_cb_idx = -1;
static u8 scsih_cb_idx = -1;
static u8 config_cb_idx = -1;
@@ -103,6 +107,18 @@ static int max_lun = MPT2SAS_MAX_LUN;
module_param(max_lun, int, 0);
MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
+ "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+
/**
* struct sense_info - common structure for obtaining sense keys
* @skey: sense key
@@ -117,8 +133,8 @@ struct sense_info {
#define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC)
-#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
-
+#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
/**
* struct fw_event_work - firmware event struct
* @list: link list framework
@@ -372,31 +388,34 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
Mpi2SasDevicePage0_t sas_device_pg0;
Mpi2ConfigReply_t mpi_reply;
u32 ioc_status;
+ *sas_address = 0;
if (handle <= ioc->sas_hba.num_phys) {
*sas_address = ioc->sas_hba.sas_address;
return 0;
- } else
- *sas_address = 0;
+ }
if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
return -ENXIO;
}
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
- "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
- __FILE__, __LINE__, __func__);
- return -EIO;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ return 0;
}
- *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- return 0;
+ /* we hit this becuase the given parent handle doesn't exist */
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ return -ENXIO;
+ /* else error case */
+ printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
+ "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+ __FILE__, __LINE__, __func__);
+ return -EIO;
}
/**
@@ -424,7 +443,11 @@ _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
u16 slot;
/* only process this function when driver loads */
- if (!ioc->wait_for_port_enable_to_complete)
+ if (!ioc->is_driver_loading)
+ return;
+
+ /* no Bios, return immediately */
+ if (!ioc->bios_pg3.BiosVersion)
return;
if (!is_raid) {
@@ -587,8 +610,15 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent))
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
/**
@@ -1400,6 +1430,10 @@ _scsih_slave_destroy(struct scsi_device *sdev)
{
struct MPT2SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
+ struct Scsi_Host *shost;
+ struct MPT2SAS_ADAPTER *ioc;
+ struct _sas_device *sas_device;
+ unsigned long flags;
if (!sdev->hostdata)
return;
@@ -1407,6 +1441,19 @@ _scsih_slave_destroy(struct scsi_device *sdev)
starget = scsi_target(sdev);
sas_target_priv_data = starget->hostdata;
sas_target_priv_data->num_luns--;
+
+ shost = dev_to_shost(&starget->dev);
+ ioc = shost_priv(shost);
+
+ if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_target_priv_data->sas_address);
+ if (sas_device)
+ sas_device->starget = NULL;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ }
+
kfree(sdev->hostdata);
sdev->hostdata = NULL;
}
@@ -1598,8 +1645,10 @@ _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device)
* _scsih_get_volume_capabilities - volume capabilities
* @ioc: per adapter object
* @sas_device: the raid_device object
+ *
+ * Returns 0 for success, else 1
*/
-static void
+static int
_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
struct _raid_device *raid_device)
{
@@ -1612,9 +1661,10 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
&num_pds)) || !num_pds) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
raid_device->num_pds = num_pds;
@@ -1622,17 +1672,19 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
sizeof(Mpi2RaidVol0PhysDisk_t));
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
kfree(vol_pg0);
- return;
+ return 1;
}
raid_device->volume_type = vol_pg0->VolumeType;
@@ -1652,6 +1704,7 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
}
kfree(vol_pg0);
+ return 0;
}
/**
* _scsih_disable_ddio - Disable direct I/O for all the volumes
@@ -1922,13 +1975,20 @@ _scsih_slave_configure(struct scsi_device *sdev)
sas_target_priv_data->handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (!raid_device) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return 0;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
+ return 1;
}
_scsih_get_volume_capabilities(ioc, raid_device);
+ if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
+ return 1;
+ }
/*
* WARPDRIVE: Initialize the required data for Direct IO
*/
@@ -2002,11 +2062,22 @@ _scsih_slave_configure(struct scsi_device *sdev)
if (sas_device) {
if (sas_target_priv_data->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT) {
- mpt2sas_config_get_volume_handle(ioc,
- sas_device->handle, &sas_device->volume_handle);
- mpt2sas_config_get_volume_wwid(ioc,
+ if (mpt2sas_config_get_volume_handle(ioc,
+ sas_device->handle, &sas_device->volume_handle)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__));
+ return 1;
+ }
+ if (sas_device->volume_handle &&
+ mpt2sas_config_get_volume_wwid(ioc,
sas_device->volume_handle,
- &sas_device->volume_wwid);
+ &sas_device->volume_wwid)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__));
+ return 1;
+ }
}
if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
@@ -2035,6 +2106,11 @@ _scsih_slave_configure(struct scsi_device *sdev)
if (!ssp_target)
_scsih_display_sata_capabilities(ioc, sas_device, sdev);
+ } else {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
@@ -2714,22 +2790,38 @@ _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
/**
- * _scsih_queue_rescan - queue a topology rescan from user context
+ * _scsih_error_recovery_delete_devices - remove devices not responding
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
+_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
{
struct fw_event_work *fw_event;
- if (ioc->wait_for_port_enable_to_complete)
+ if (ioc->is_driver_loading)
return;
+ fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
+ fw_event->ioc = ioc;
+ _scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * mpt2sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event;
+
fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
if (!fw_event)
return;
- fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
+ fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
}
@@ -2977,14 +3069,27 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
Mpi2SCSITaskManagementRequest_t *mpi_request;
u16 smid;
struct _sas_device *sas_device;
- struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
+ u64 sas_address = 0;
unsigned long flags;
struct _tr_list *delayed_tr;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
+ return;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
+ return;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
return;
}
@@ -2998,13 +3103,18 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
sas_target_priv_data->deleted = 1;
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "setting delete flag: handle(0x%04x), "
- "sas_addr(0x%016llx)\n", ioc->name, handle,
- (unsigned long long) sas_device->sas_address));
+ sas_address = sas_device->sas_address;
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_target_priv_data) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
+ "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
+ (unsigned long long)sas_address));
+ _scsih_ublock_io_device(ioc, handle);
+ sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
+ }
+
smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
if (!smid) {
delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
@@ -3185,11 +3295,21 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
mpt2sas_base_get_reply_virt_addr(ioc, reply);
Mpi2SasIoUnitControlRequest_t *mpi_request;
u16 smid_sas_ctrl;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed\n", __func__, ioc->name));
+ return 1;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery\n", __func__, ioc->name));
+ return 1;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational\n", __func__, ioc->name));
return 1;
}
@@ -5099,7 +5219,7 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
- if (ioc->wait_for_port_enable_to_complete)
+ if (ioc->wait_for_discovery_to_complete)
_scsih_sas_device_init_add(ioc, sas_device);
else
_scsih_sas_device_add(ioc, sas_device);
@@ -5135,6 +5255,9 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
if (sas_device_backup.starget && sas_device_backup.starget->hostdata) {
sas_target_priv_data = sas_device_backup.starget->hostdata;
sas_target_priv_data->deleted = 1;
+ _scsih_ublock_io_device(ioc, sas_device_backup.handle);
+ sas_target_priv_data->handle =
+ MPT2SAS_INVALID_DEVICE_HANDLE;
}
_scsih_ublock_io_device(ioc, sas_device_backup.handle);
@@ -5288,7 +5411,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
_scsih_sas_topology_change_event_debug(ioc, event_data);
#endif
- if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+ if (ioc->remove_host || ioc->pci_error_recovery)
return;
if (!ioc->sas_hba.num_phys)
@@ -5349,6 +5472,9 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+ if (ioc->shost_recovery)
+ break;
+
if (link_rate == prev_link_rate)
break;
@@ -5362,6 +5488,9 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+ if (ioc->shost_recovery)
+ break;
+
mpt2sas_transport_update_links(ioc, sas_address,
handle, phy_number, link_rate);
@@ -5622,7 +5751,7 @@ broadcast_aen_retry:
termination_count = 0;
query_count = 0;
for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out;
scmd = _scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
@@ -5644,7 +5773,7 @@ broadcast_aen_retry:
lun = sas_device_priv_data->lun;
query_count++;
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -5686,7 +5815,7 @@ broadcast_aen_retry:
goto broadcast_aen_retry;
}
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out_no_lock;
r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
@@ -5725,7 +5854,7 @@ broadcast_aen_retry:
ioc->name, __func__, query_count, termination_count));
ioc->broadcast_aen_busy = 0;
- if (!ioc->ioc_reset_in_progress_status)
+ if (!ioc->shost_recovery)
_scsih_ublock_io_all_device(ioc);
mutex_unlock(&ioc->tm_cmds.mutex);
}
@@ -5789,8 +5918,11 @@ _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
static void
_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
{
- struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ if (starget == NULL)
+ return;
+ sas_target_priv_data = starget->hostdata;
if (no_uld_attach)
sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
else
@@ -5845,7 +5977,7 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
raid_device->handle = handle;
raid_device->wwid = wwid;
_scsih_raid_device_add(ioc, raid_device);
- if (!ioc->wait_for_port_enable_to_complete) {
+ if (!ioc->wait_for_discovery_to_complete) {
rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
raid_device->id, 0);
if (rc)
@@ -6127,6 +6259,10 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
+
+ if (ioc->shost_recovery)
+ return;
+
foreign_config = (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
@@ -6185,6 +6321,9 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
int rc;
Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
+ if (ioc->shost_recovery)
+ return;
+
if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
return;
@@ -6267,6 +6406,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
u64 sas_address;
+ if (ioc->shost_recovery)
+ return;
+
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
@@ -6510,10 +6652,10 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
u32 device_info;
u16 slot;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
if (list_empty(&ioc->sas_device_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -6532,6 +6674,9 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
_scsih_mark_responding_sas_device(ioc, sas_address, slot,
handle);
}
+out:
+ printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
+ ioc->name);
}
/**
@@ -6607,10 +6752,14 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
u16 handle;
u8 phys_disk_num;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ if (!ioc->ir_firmware)
+ return;
+
+ printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
+ ioc->name);
if (list_empty(&ioc->raid_device_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -6649,6 +6798,9 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
set_bit(handle, ioc->pd_handles);
}
}
+out:
+ printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
+ "complete\n", ioc->name);
}
/**
@@ -6708,10 +6860,10 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
u64 sas_address;
u16 handle;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
if (list_empty(&ioc->sas_expander_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -6730,6 +6882,8 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
_scsih_mark_responding_expander(ioc, sas_address, handle);
}
+ out:
+ printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
}
/**
@@ -6745,6 +6899,8 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
struct _sas_node *sas_expander;
struct _raid_device *raid_device, *raid_device_next;
+ printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
+ ioc->name);
list_for_each_entry_safe(sas_device, sas_device_next,
&ioc->sas_device_list, list) {
@@ -6764,6 +6920,9 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
_scsih_remove_device(ioc, sas_device);
}
+ if (!ioc->ir_firmware)
+ goto retry_expander_search;
+
list_for_each_entry_safe(raid_device, raid_device_next,
&ioc->raid_device_list, list) {
if (raid_device->responding) {
@@ -6790,52 +6949,170 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
mpt2sas_expander_remove(ioc, sas_expander->sas_address);
goto retry_expander_search;
}
+ printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
+ ioc->name);
+ /* unblock devices */
+ _scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander, u16 handle)
+{
+ Mpi2ExpanderPage1_t expander_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ int i;
+
+ for (i = 0 ; i < sas_expander->num_phys ; i++) {
+ if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
+ &expander_pg1, i, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
+ le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+ expander_pg1.NegotiatedLinkRate >> 4);
+ }
}
/**
- * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
{
- struct _sas_device *sas_device, *sas_device_next;
+ Mpi2ExpanderPage0_t expander_pg0;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2RaidVolPage1_t volume_pg1;
+ Mpi2RaidVolPage0_t volume_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2EventIrConfigElement_t element;
+ Mpi2ConfigReply_t mpi_reply;
+ u8 phys_disk_num;
+ u16 ioc_status;
+ u16 handle, parent_handle;
+ u64 sas_address;
+ struct _sas_device *sas_device;
+ struct _sas_node *expander_device;
+ static struct _raid_device *raid_device;
- if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
- MFG_PAGE10_HIDE_IF_VOL_PRESENT)
- return;
+ printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
- if (ioc->hide_drives) {
- if (_scsih_get_num_volumes(ioc))
- return;
- ioc->hide_drives = 0;
- list_for_each_entry_safe(sas_device, sas_device_next,
- &ioc->sas_device_list, list) {
- if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
- }
+ _scsih_sas_host_refresh(ioc);
+
+ /* expanders */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+ MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(expander_pg0.DevHandle);
+ expander_device = mpt2sas_scsih_expander_find_by_sas_address(
+ ioc, le64_to_cpu(expander_pg0.SASAddress));
+ if (expander_device)
+ _scsih_refresh_expander_links(ioc, expander_device,
+ handle);
+ else
+ _scsih_expander_add(ioc, handle);
+ }
+
+ if (!ioc->ir_firmware)
+ goto skip_to_sas;
+
+ /* phys disk */
+ phys_disk_num = 0xFF;
+ while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+ phys_disk_num))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ phys_disk_num = pd_pg0.PhysDiskNum;
+ handle = le16_to_cpu(pd_pg0.DevHandle);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (sas_device)
+ continue;
+ if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle) != 0)
+ continue;
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle,
+ &sas_address)) {
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, sas_device_pg0.PhyNum,
+ MPI2_SAS_NEG_LINK_RATE_1_5);
+ set_bit(handle, ioc->pd_handles);
+ _scsih_add_device(ioc, handle, 0, 1);
}
- } else {
- if (!_scsih_get_num_volumes(ioc))
- return;
- ioc->hide_drives = 1;
- list_for_each_entry_safe(sas_device, sas_device_next,
- &ioc->sas_device_list, list) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
+ }
+
+ /* volumes */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(volume_pg1.DevHandle);
+ raid_device = _scsih_raid_device_find_by_wwid(ioc,
+ le64_to_cpu(volume_pg1.WWID));
+ if (raid_device)
+ continue;
+ if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+ &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+ sizeof(Mpi2RaidVolPage0_t)))
+ continue;
+ if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+ volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+ volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+ memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+ element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+ element.VolDevHandle = volume_pg1.DevHandle;
+ _scsih_sas_volume_add(ioc, &element);
}
}
+
+ skip_to_sas:
+
+ /* sas devices */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+ handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(sas_device_pg0.DevHandle);
+ if (!(_scsih_is_end_device(
+ le32_to_cpu(sas_device_pg0.DeviceInfo))))
+ continue;
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ le64_to_cpu(sas_device_pg0.SASAddress));
+ if (sas_device)
+ continue;
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ _scsih_add_device(ioc, handle, 0, 0);
+ }
+ }
+
+ printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
}
+
/**
* mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
* @ioc: per adapter object
@@ -6871,7 +7148,6 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
}
_scsih_fw_event_cleanup_queue(ioc);
_scsih_flush_running_cmds(ioc);
- _scsih_queue_rescan(ioc);
break;
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
@@ -6881,6 +7157,13 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
_scsih_search_responding_sas_devices(ioc);
_scsih_search_responding_raid_devices(ioc);
_scsih_search_responding_expanders(ioc);
+ if (!ioc->is_driver_loading) {
+ _scsih_prep_device_scan(ioc);
+ _scsih_search_responding_sas_devices(ioc);
+ _scsih_search_responding_raid_devices(ioc);
+ _scsih_search_responding_expanders(ioc);
+ _scsih_error_recovery_delete_devices(ioc);
+ }
break;
}
}
@@ -6898,7 +7181,6 @@ _firmware_event_work(struct work_struct *work)
{
struct fw_event_work *fw_event = container_of(work,
struct fw_event_work, delayed_work.work);
- unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
/* the queue is being flushed so ignore this event */
@@ -6908,23 +7190,21 @@ _firmware_event_work(struct work_struct *work)
return;
}
- if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
- _scsih_fw_event_free(ioc, fw_event);
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery) {
- init_completion(&ioc->shost_recovery_done);
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
- flags);
- wait_for_completion(&ioc->shost_recovery_done);
- } else
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
- flags);
+ switch (fw_event->event) {
+ case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
+ while (scsi_host_in_recovery(ioc->shost))
+ ssleep(1);
_scsih_remove_unresponding_sas_devices(ioc);
- _scsih_hide_unhide_sas_devices(ioc);
- return;
- }
+ _scsih_scan_for_devices_after_reset(ioc);
+ break;
+ case MPT2SAS_PORT_ENABLE_COMPLETE:
+ ioc->start_scan = 0;
- switch (fw_event->event) {
+
+
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
+ "from worker thread\n", ioc->name));
+ break;
case MPT2SAS_TURN_ON_FAULT_LED:
_scsih_turn_on_fault_led(ioc, fw_event->device_handle);
break;
@@ -7121,6 +7401,8 @@ static struct scsi_host_template scsih_driver_template = {
.slave_configure = _scsih_slave_configure,
.target_destroy = _scsih_target_destroy,
.slave_destroy = _scsih_slave_destroy,
+ .scan_finished = _scsih_scan_finished,
+ .scan_start = _scsih_scan_start,
.change_queue_depth = _scsih_change_queue_depth,
.change_queue_type = _scsih_change_queue_type,
.eh_abort_handler = _scsih_abort,
@@ -7381,7 +7663,12 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
unsigned long flags;
int rc;
+ /* no Bios, return immediately */
+ if (!ioc->bios_pg3.BiosVersion)
+ return;
+
device = NULL;
+ is_raid = 0;
if (ioc->req_boot_device.device) {
device = ioc->req_boot_device.device;
is_raid = ioc->req_boot_device.is_raid;
@@ -7417,8 +7704,9 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address,
- sas_address_parent);
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc, sas_address,
+ sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
@@ -7462,22 +7750,28 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
/* SAS Device List */
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
list) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_move_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (ioc->hide_drives)
continue;
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
+
}
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_move_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
@@ -7490,9 +7784,7 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
static void
_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
{
- u16 volume_mapping_flags =
- le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
- MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+ u16 volume_mapping_flags;
if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
return; /* return when IOC doesn't support initiator mode */
@@ -7500,18 +7792,93 @@ _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
_scsih_probe_boot_devices(ioc);
if (ioc->ir_firmware) {
- if ((volume_mapping_flags &
- MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
- _scsih_probe_sas(ioc);
+ volume_mapping_flags =
+ le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+ MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+ if (volume_mapping_flags ==
+ MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
_scsih_probe_raid(ioc);
+ _scsih_probe_sas(ioc);
} else {
- _scsih_probe_raid(ioc);
_scsih_probe_sas(ioc);
+ _scsih_probe_raid(ioc);
}
} else
_scsih_probe_sas(ioc);
}
+
+/**
+ * _scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus. In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+_scsih_scan_start(struct Scsi_Host *shost)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ int rc;
+
+ if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+ mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
+
+ ioc->start_scan = 1;
+ rc = mpt2sas_port_enable(ioc);
+
+ if (rc != 0)
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
+}
+
+/**
+ * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodically until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ if (time >= (300 * HZ)) {
+ ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
+ "(timeout=300s)\n", ioc->name);
+ ioc->is_driver_loading = 0;
+ return 1;
+ }
+
+ if (ioc->start_scan)
+ return 0;
+
+ if (ioc->start_scan_failed) {
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
+ "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
+ ioc->is_driver_loading = 0;
+ ioc->wait_for_discovery_to_complete = 0;
+ ioc->remove_host = 1;
+ return 1;
+ }
+
+ printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
+ ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+
+ if (ioc->wait_for_discovery_to_complete) {
+ ioc->wait_for_discovery_to_complete = 0;
+ _scsih_probe_devices(ioc);
+ }
+ mpt2sas_base_start_watchdog(ioc);
+ ioc->is_driver_loading = 0;
+ return 1;
+}
+
+
/**
* _scsih_probe - attach and add scsi host
* @pdev: PCI device struct
@@ -7548,6 +7915,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->tm_cb_idx = tm_cb_idx;
ioc->ctl_cb_idx = ctl_cb_idx;
ioc->base_cb_idx = base_cb_idx;
+ ioc->port_enable_cb_idx = port_enable_cb_idx;
ioc->transport_cb_idx = transport_cb_idx;
ioc->scsih_cb_idx = scsih_cb_idx;
ioc->config_cb_idx = config_cb_idx;
@@ -7620,14 +7988,14 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_thread_fail;
}
- ioc->wait_for_port_enable_to_complete = 1;
+ ioc->is_driver_loading = 1;
if ((mpt2sas_base_attach(ioc))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_attach_fail;
}
- ioc->wait_for_port_enable_to_complete = 0;
+ scsi_scan_host(shost);
if (ioc->is_warpdrive) {
if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
ioc->hide_drives = 0;
@@ -7650,6 +8018,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
out_thread_fail:
list_del(&ioc->list);
scsi_remove_host(shost);
+ scsi_host_put(shost);
out_add_shost_fail:
return -ENODEV;
}
@@ -7896,6 +8265,8 @@ _scsih_init(void)
/* base internal commands callback handler */
base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
+ port_enable_cb_idx = mpt2sas_base_register_callback_handler(
+ mpt2sas_port_enable_done);
/* transport internal commands callback handler */
transport_cb_idx = mpt2sas_base_register_callback_handler(
@@ -7950,6 +8321,7 @@ _scsih_exit(void)
mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
mpt2sas_base_release_callback_handler(tm_cb_idx);
mpt2sas_base_release_callback_handler(base_cb_idx);
+ mpt2sas_base_release_callback_handler(port_enable_cb_idx);
mpt2sas_base_release_callback_handler(transport_cb_idx);
mpt2sas_base_release_callback_handler(scsih_cb_idx);
mpt2sas_base_release_callback_handler(config_cb_idx);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 621b5e07275..6f589195746 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -732,6 +732,16 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
.class_mask = 0,
.driver_data = chip_9485,
},
+ { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
+ { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1041), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1042), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1043), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1044), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1080), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1083), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1084), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
{ } /* terminate list */
};
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index b86db84d6f3..5163edb925c 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4102,7 +4102,7 @@ static long pmcraid_chr_ioctl(
struct pmcraid_ioctl_header *hdr = NULL;
int retval = -ENOTTY;
- hdr = kmalloc(GFP_KERNEL, sizeof(struct pmcraid_ioctl_header));
+ hdr = kmalloc(sizeof(struct pmcraid_ioctl_header), GFP_KERNEL);
if (!hdr) {
pmcraid_err("faile to allocate memory for ioctl header\n");
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 3474e86e98a..2516adf1aee 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2279,7 +2279,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
ha = rsp->hw;
/* Clear the interrupt, if enabled, for this response queue */
- if (rsp->options & ~BIT_6) {
+ if (!ha->flags.disable_msix_handshake) {
reg = &ha->iobase->isp24;
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fc3f168decb..b4d43ae7613 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1698,6 +1698,15 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
void scsi_free_queue(struct request_queue *q)
{
+ unsigned long flags;
+
+ WARN_ON(q->queuedata);
+
+ /* cause scsi_request_fn() to kill all non-finished requests */
+ spin_lock_irqsave(q->queue_lock, flags);
+ q->request_fn(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
blk_cleanup_queue(q);
}
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 44e8ca398ef..72273a0e566 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -322,6 +322,7 @@ out_device_destroy:
scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
put_device(&sdev->sdev_dev);
+ scsi_free_queue(sdev->request_queue);
put_device(&sdev->sdev_gendev);
out:
if (display_failure_msg)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 1bcd65a509e..96029e6d027 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -520,7 +520,7 @@ fail_host_msg:
/**
* iscsi_bsg_host_add - Create and add the bsg hooks to receive requests
* @shost: shost for iscsi_host
- * @cls_host: iscsi_cls_host adding the structures to
+ * @ihost: iscsi_cls_host adding the structures to
*/
static int
iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a7942e5c8be..fa3a5918009 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2590,18 +2590,16 @@ static int sd_probe(struct device *dev)
spin_unlock(&sd_index_lock);
} while (error == -EAGAIN);
- if (error)
+ if (error) {
+ sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
goto out_put;
-
- if (index >= SD_MAX_DISKS) {
- error = -ENODEV;
- sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n");
- goto out_free_index;
}
error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
- if (error)
+ if (error) {
+ sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
goto out_free_index;
+ }
sdkp->device = sdp;
sdkp->driver = &sd_template;
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 6ad798bfd52..4163f2910e3 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -9,12 +9,6 @@
#define SD_MAJORS 16
/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
-
-/*
* Time out in seconds for disks and Magneto-opticals (which are slower).
*/
#define SD_TIMEOUT (30 * HZ)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 1871b8ae83a..9b28f39bac2 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -462,14 +462,16 @@ static void st_scsi_execute_end(struct request *req, int uptodate)
{
struct st_request *SRpnt = req->end_io_data;
struct scsi_tape *STp = SRpnt->stp;
+ struct bio *tmp;
STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
STp->buffer->cmdstat.residual = req->resid_len;
+ tmp = SRpnt->bio;
if (SRpnt->waiting)
complete(SRpnt->waiting);
- blk_rq_unmap_user(SRpnt->bio);
+ blk_rq_unmap_user(tmp);
__blk_put_request(req->q, req);
}