aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000/e1000_hw.c
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2008-04-03 10:06:32 -0700
committerJeff Garzik <jgarzik@redhat.com>2008-04-16 20:41:45 -0400
commit406874a7ccee927049b1c182df69457718b938da (patch)
treea5110e1ef04eeba215460ca5b8ceae2cc413a8b5 /drivers/net/e1000/e1000_hw.c
parent222441a6201f791238320e77eb4ba9528cd3934c (diff)
e1000: convert uint16_t style integers to u16
Conglomerate from 4 separate patches from Joe. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
-rw-r--r--drivers/net/e1000/e1000_hw.c1324
1 files changed, 662 insertions, 662 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index b64203458e9..9a4b6cbddf2 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -33,107 +33,107 @@
#include "e1000_hw.h"
-static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
-static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
-static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
-static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
-static int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
static void e1000_release_software_semaphore(struct e1000_hw *hw);
-static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw);
-static int32_t e1000_check_downshift(struct e1000_hw *hw);
-static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity);
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity);
static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
static void e1000_clear_vfta(struct e1000_hw *hw);
-static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw);
-static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
bool link_up);
-static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw);
-static int32_t e1000_detect_gig_phy(struct e1000_hw *hw);
-static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank);
-static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw);
-static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length);
-static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
-static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static int32_t e1000_get_software_flag(struct e1000_hw *hw);
-static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw);
-static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout);
-static int32_t e1000_id_led_init(struct e1000_hw *hw);
-static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
-static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length);
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_get_software_flag(struct e1000_hw *hw);
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, u32 cnf_base_addr, u32 cnf_size);
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
static void e1000_init_rx_addrs(struct e1000_hw *hw);
static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
-static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
-static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw);
-static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum);
-static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr);
-static int32_t e1000_mng_write_commit(struct e1000_hw *hw);
-static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
-static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum);
+static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr);
+static s32 e1000_mng_write_commit(struct e1000_hw *hw);
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
-static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data);
-static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte);
-static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte);
-static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data);
-static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data);
-static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data);
-static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 *data);
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 data);
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
static void e1000_release_software_flag(struct e1000_hw *hw);
-static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
-static int32_t e1000_wait_autoneg(struct e1000_hw *hw);
-static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
-static int32_t e1000_set_phy_type(struct e1000_hw *hw);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
static void e1000_phy_init_script(struct e1000_hw *hw);
-static int32_t e1000_setup_copper_link(struct e1000_hw *hw);
-static int32_t e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
-static int32_t e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
-static int32_t e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static int32_t e1000_config_mac_to_phy(struct e1000_hw *hw);
-static void e1000_raise_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl);
-static void e1000_lower_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl);
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, uint32_t data,
- uint16_t count);
-static uint16_t e1000_shift_in_mdi_bits(struct e1000_hw *hw);
-static int32_t e1000_phy_reset_dsp(struct e1000_hw *hw);
-static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset,
- uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw,
- uint16_t offset, uint16_t words,
- uint16_t *data);
-static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw);
-static void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
-static void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, uint16_t data,
- uint16_t count);
-static int32_t e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data);
-static int32_t e1000_read_phy_reg_ex(struct e1000_hw *hw,uint32_t reg_addr,
- uint16_t *phy_data);
-static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count);
-static int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
+ u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw,
+ u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data,
+ u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
static void e1000_release_eeprom(struct e1000_hw *hw);
static void e1000_standby_eeprom(struct e1000_hw *hw);
-static int32_t e1000_set_vco_speed(struct e1000_hw *hw);
-static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw);
-static int32_t e1000_set_phy_mode(struct e1000_hw *hw);
-static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer);
-static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length);
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
- uint16_t duplex);
-static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+ u16 duplex);
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
/* IGP cable length table */
static const
-uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
{ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
@@ -144,7 +144,7 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
static const
-uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
+u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
@@ -159,7 +159,7 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_set_phy_type(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_set_phy_type");
@@ -213,8 +213,8 @@ e1000_set_phy_type(struct e1000_hw *hw)
static void
e1000_phy_init_script(struct e1000_hw *hw)
{
- uint32_t ret_val;
- uint16_t phy_saved_data;
+ u32 ret_val;
+ u16 phy_saved_data;
DEBUGFUNC("e1000_phy_init_script");
@@ -272,7 +272,7 @@ e1000_phy_init_script(struct e1000_hw *hw)
e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
if (hw->mac_type == e1000_82547) {
- uint16_t fused, fine, coarse;
+ u16 fused, fine, coarse;
/* Move to analog registers page */
e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
@@ -306,7 +306,7 @@ e1000_phy_init_script(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_set_mac_type(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_set_mac_type");
@@ -477,7 +477,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
void
e1000_set_media_type(struct e1000_hw *hw)
{
- uint32_t status;
+ u32 status;
DEBUGFUNC("e1000_set_media_type");
@@ -528,17 +528,17 @@ e1000_set_media_type(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_reset_hw(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t ctrl_ext;
- uint32_t icr;
- uint32_t manc;
- uint32_t led_ctrl;
- uint32_t timeout;
- uint32_t extcnf_ctrl;
- int32_t ret_val;
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ u32 timeout;
+ u32 extcnf_ctrl;
+ s32 ret_val;
DEBUGFUNC("e1000_reset_hw");
@@ -730,7 +730,7 @@ e1000_reset_hw(struct e1000_hw *hw)
}
if (hw->mac_type == e1000_ich8lan) {
- uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+ u32 kab = E1000_READ_REG(hw, KABGTXD);
kab |= E1000_KABGTXD_BGSQLBIAS;
E1000_WRITE_REG(hw, KABGTXD, kab);
}
@@ -752,10 +752,10 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
{
if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
/* Settings common to all PCI-express silicon */
- uint32_t reg_ctrl, reg_ctrl_ext;
- uint32_t reg_tarc0, reg_tarc1;
- uint32_t reg_tctl;
- uint32_t reg_txdctl, reg_txdctl1;
+ u32 reg_ctrl, reg_ctrl_ext;
+ u32 reg_tarc0, reg_tarc1;
+ u32 reg_tctl;
+ u32 reg_txdctl, reg_txdctl1;
/* link autonegotiation/sync workarounds */
reg_tarc0 = E1000_READ_REG(hw, TARC0);
@@ -866,15 +866,15 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
* configuration and flow control settings. Clears all on-chip counters. Leaves
* the transmit and receive units disabled and uninitialized.
*****************************************************************************/
-int32_t
+s32
e1000_init_hw(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t i;
- int32_t ret_val;
- uint32_t mta_size;
- uint32_t reg_data;
- uint32_t ctrl_ext;
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 reg_data;
+ u32 ctrl_ext;
DEBUGFUNC("e1000_init_hw");
@@ -1020,7 +1020,7 @@ e1000_init_hw(struct e1000_hw *hw)
if (hw->mac_type == e1000_82573) {
- uint32_t gcr = E1000_READ_REG(hw, GCR);
+ u32 gcr = E1000_READ_REG(hw, GCR);
gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
E1000_WRITE_REG(hw, GCR, gcr);
}
@@ -1054,11 +1054,11 @@ e1000_init_hw(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code.
*****************************************************************************/
-static int32_t
+static s32
e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
{
- uint16_t eeprom_data;
- int32_t ret_val;
+ u16 eeprom_data;
+ s32 ret_val;
DEBUGFUNC("e1000_adjust_serdes_amplitude");
@@ -1100,12 +1100,12 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
* established. Assumes the hardware has previously been reset and the
* transmitter and receiver are not enabled.
*****************************************************************************/
-int32_t
+s32
e1000_setup_link(struct e1000_hw *hw)
{
- uint32_t ctrl_ext;
- int32_t ret_val;
- uint16_t eeprom_data;
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
DEBUGFUNC("e1000_setup_link");
@@ -1233,15 +1233,15 @@ e1000_setup_link(struct e1000_hw *hw)
* link. Assumes the hardware has been previously reset and the transmitter
* and receiver are not enabled.
*****************************************************************************/
-static int32_t
+static s32
e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t status;
- uint32_t txcw = 0;
- uint32_t i;
- uint32_t signal = 0;
- int32_t ret_val;
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
DEBUGFUNC("e1000_setup_fiber_serdes_link");
@@ -1380,12 +1380,12 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_copper_link_preconfig(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_preconfig");
@@ -1440,12 +1440,12 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_igp_setup(struct e1000_hw *hw)
{
- uint32_t led_ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_igp_setup");
@@ -1587,12 +1587,12 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_ggp_setup(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
- uint32_t reg_data;
+ s32 ret_val;
+ u16 phy_data;
+ u32 reg_data;
DEBUGFUNC("e1000_copper_link_ggp_setup");
@@ -1735,11 +1735,11 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_mgp_setup(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_mgp_setup");
@@ -1839,11 +1839,11 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_autoneg");
@@ -1910,10 +1910,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_copper_link_postconfig(struct e1000_hw *hw)
{
- int32_t ret_val;
+ s32 ret_val;
DEBUGFUNC("e1000_copper_link_postconfig");
if (hw->mac_type >= e1000_82544) {
@@ -1948,13 +1948,13 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_setup_copper_link(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t i;
- uint16_t phy_data;
- uint16_t reg_data;
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+ u16 reg_data;
DEBUGFUNC("e1000_setup_copper_link");
@@ -2062,12 +2062,12 @@ e1000_setup_copper_link(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
+static s32
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
{
- int32_t ret_val = E1000_SUCCESS;
- uint32_t tipg;
- uint16_t reg_data;
+ s32 ret_val = E1000_SUCCESS;
+ u32 tipg;
+ u16 reg_data;
DEBUGFUNC("e1000_configure_kmrn_for_10_100");
@@ -2098,12 +2098,12 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
return ret_val;
}
-static int32_t
+static s32
e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
{
- int32_t ret_val = E1000_SUCCESS;
- uint16_t reg_data;
- uint32_t tipg;
+ s32 ret_val = E1000_SUCCESS;
+ u16 reg_data;
+ u32 tipg;
DEBUGFUNC("e1000_configure_kmrn_for_1000");
@@ -2135,12 +2135,12 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-int32_t
+s32
e1000_phy_setup_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_autoneg_adv_reg;
- uint16_t mii_1000t_ctrl_reg;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
DEBUGFUNC("e1000_phy_setup_autoneg");
@@ -2284,15 +2284,15 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_phy_force_speed_duplex(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t mii_ctrl_reg;
- uint16_t mii_status_reg;
- uint16_t phy_data;
- uint16_t i;
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
DEBUGFUNC("e1000_phy_force_speed_duplex");
@@ -2538,7 +2538,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
void
e1000_config_collision_dist(struct e1000_hw *hw)
{
- uint32_t tctl, coll_dist;
+ u32 tctl, coll_dist;
DEBUGFUNC("e1000_config_collision_dist");
@@ -2565,12 +2565,12 @@ e1000_config_collision_dist(struct e1000_hw *hw)
* The contents of the PHY register containing the needed information need to
* be passed in.
******************************************************************************/
-static int32_t
+static s32
e1000_config_mac_to_phy(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_config_mac_to_phy");
@@ -2624,10 +2624,10 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
* by the PHY rather than the MAC. Software must also configure these
* bits when link is forced on a fiber connection.
*****************************************************************************/
-int32_t
+s32
e1000_force_mac_fc(struct e1000_hw *hw)
{
- uint32_t ctrl;
+ u32 ctrl;
DEBUGFUNC("e1000_force_mac_fc");
@@ -2691,15 +2691,15 @@ e1000_force_mac_fc(struct e1000_hw *hw)
* based on the flow control negotiated by the PHY. In TBI mode, the TFCE
* and RFCE bits will be automaticaly set to the negotiated flow control mode.
*****************************************************************************/
-static int32_t
+static s32
e1000_config_fc_after_link_up(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_status_reg;
- uint16_t mii_nway_adv_reg;
- uint16_t mii_nway_lp_ability_reg;
- uint16_t speed;
- uint16_t duplex;
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
DEBUGFUNC("e1000_config_fc_after_link_up");
@@ -2896,17 +2896,17 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
*
* Called by any function that needs to check the link status of the adapter.
*****************************************************************************/
-int32_t
+s32
e1000_check_for_link(struct e1000_hw *hw)
{
- uint32_t rxcw = 0;
- uint32_t ctrl;
- uint32_t status;
- uint32_t rctl;
- uint32_t icr;
- uint32_t signal = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_for_link");
@@ -3022,7 +3022,7 @@ e1000_check_for_link(struct e1000_hw *hw)
* at gigabit speed, we turn on TBI compatibility.
*/
if (hw->tbi_compatibility_en) {
- uint16_t speed, duplex;
+ u16 speed, duplex;
ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
DEBUGOUT("Error getting link speed and duplex\n");
@@ -3132,14 +3132,14 @@ e1000_check_for_link(struct e1000_hw *hw)
* speed - Speed of the connection
* duplex - Duplex setting of the connection
*****************************************************************************/
-int32_t
+s32
e1000_get_speed_and_duplex(struct e1000_hw *hw,
- uint16_t *speed,
- uint16_t *duplex)
+ u16 *speed,
+ u16 *duplex)
{
- uint32_t status;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_get_speed_and_duplex");
@@ -3214,12 +3214,12 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_wait_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t i;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
DEBUGFUNC("e1000_wait_autoneg");
DEBUGOUT("Waiting for Auto-Neg to complete.\n");
@@ -3251,7 +3251,7 @@ e1000_wait_autoneg(struct e1000_hw *hw)
******************************************************************************/
static void
e1000_raise_mdi_clk(struct e1000_hw *hw,
- uint32_t *ctrl)
+ u32 *ctrl)
{
/* Raise the clock input to the Management Data Clock (by setting the MDC
* bit), and then delay 10 microseconds.
@@ -3269,7 +3269,7 @@ e1000_raise_mdi_clk(struct e1000_hw *hw,
******************************************************************************/
static void
e1000_lower_mdi_clk(struct e1000_hw *hw,
- uint32_t *ctrl)
+ u32 *ctrl)
{
/* Lower the clock input to the Management Data Clock (by clearing the MDC
* bit), and then delay 10 microseconds.
@@ -3290,11 +3290,11 @@ e1000_lower_mdi_clk(struct e1000_hw *hw,
******************************************************************************/
static void
e1000_shift_out_mdi_bits(struct e1000_hw *hw,
- uint32_t data,
- uint16_t count)
+ u32 data,
+ u16 count)
{
- uint32_t ctrl;
- uint32_t mask;
+ u32 ctrl;
+ u32 mask;
/* We need to shift "count" number of bits out to the PHY. So, the value
* in the "data" parameter will be shifted out to the PHY one bit at a
@@ -3338,12 +3338,12 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw,
*
* Bits are shifted in in MSB to LSB order.
******************************************************************************/
-static uint16_t
+static u16
e1000_shift_in_mdi_bits(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint16_t data = 0;
- uint8_t i;
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
/* In order to read a register from the PHY, we need to shift in a total
* of 18 bits from the PHY. The first two bit (turnaround) times are used
@@ -3384,13 +3384,13 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw)
return data;
}
-static int32_t
-e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
+static s32
+e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
{
- uint32_t swfw_sync = 0;
- uint32_t swmask = mask;
- uint32_t fwmask = mask << 16;
- int32_t timeout = 200;
+ u32 swfw_sync = 0;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 timeout = 200;
DEBUGFUNC("e1000_swfw_sync_acquire");
@@ -3429,10 +3429,10 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
}
static void
-e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
+e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
{
- uint32_t swfw_sync;
- uint32_t swmask = mask;
+ u32 swfw_sync;
+ u32 swmask = mask;
DEBUGFUNC("e1000_swfw_sync_release");
@@ -3464,13 +3464,13 @@ e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
* hw - Struct containing variables accessed by shared code
* reg_addr - address of the PHY register to read
******************************************************************************/
-int32_t
+s32
e1000_read_phy_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t *phy_data)
+ u32 reg_addr,
+ u16 *phy_data)
{
- uint32_t ret_val;
- uint16_t swfw;
+ u32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_read_phy_reg");
@@ -3488,7 +3488,7 @@ e1000_read_phy_reg(struct e1000_hw *hw,
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (uint16_t)reg_addr);
+ (u16)reg_addr);
if (ret_val) {
e1000_swfw_sync_release(hw, swfw);
return ret_val;
@@ -3499,14 +3499,14 @@ e1000_read_phy_reg(struct e1000_hw *hw,
/* Select Configuration Page */
if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
} else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
ret_val = e1000_write_phy_reg_ex(hw,
GG82563_PHY_PAGE_SELECT_ALT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
}
if (ret_val) {
@@ -3523,13 +3523,13 @@ e1000_read_phy_reg(struct e1000_hw *hw,
return ret_val;
}
-static int32_t
-e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t *phy_data)
+static s32
+e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
{
- uint32_t i;
- uint32_t mdic = 0;
- const uint32_t phy_addr = 1;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
DEBUGFUNC("e1000_read_phy_reg_ex");
@@ -3563,7 +3563,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
DEBUGOUT("MDI Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (uint16_t) mdic;
+ *phy_data = (u16) mdic;
} else {
/* We must first send a preamble through the MDIO pin to signal the
* beginning of an MII instruction. This is done by sending 32
@@ -3603,12 +3603,12 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
* reg_addr - address of the PHY register to write
* data - data to write to the PHY
******************************************************************************/
-int32_t
-e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data)
+s32
+e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
{
- uint32_t ret_val;
- uint16_t swfw;
+ u32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_write_phy_reg");
@@ -3626,7 +3626,7 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (uint16_t)reg_addr);
+ (u16)reg_addr);
if (ret_val) {
e1000_swfw_sync_release(hw, swfw);
return ret_val;
@@ -3637,14 +3637,14 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
/* Select Configuration Page */
if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
} else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
ret_val = e1000_write_phy_reg_ex(hw,
GG82563_PHY_PAGE_SELECT_ALT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
}
if (ret_val) {
@@ -3661,13 +3661,13 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
return ret_val;
}
-static int32_t
-e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data)
+static s32
+e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
{
- uint32_t i;
- uint32_t mdic = 0;
- const uint32_t phy_addr = 1;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
DEBUGFUNC("e1000_write_phy_reg_ex");
@@ -3681,7 +3681,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
* for the PHY register in the MDI Control register. The MAC will take
* care of interfacing with the PHY to send the desired data.
*/
- mdic = (((uint32_t) phy_data) |
+ mdic = (((u32) phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
@@ -3715,7 +3715,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
mdic <<= 16;
- mdic |= (uint32_t) phy_data;
+ mdic |= (u32) phy_data;
e1000_shift_out_mdi_bits(hw, mdic, 32);
}
@@ -3723,13 +3723,13 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
return E1000_SUCCESS;
}
-static int32_t
+static s32
e1000_read_kmrn_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t *data)
+ u32 reg_addr,
+ u16 *data)
{
- uint32_t reg_val;
- uint16_t swfw;
+ u32 reg_val;
+ u16 swfw;
DEBUGFUNC("e1000_read_kmrn_reg");
if ((hw->mac_type == e1000_80003es2lan) &&
@@ -3750,19 +3750,19 @@ e1000_read_kmrn_reg(struct e1000_hw *hw,
/* Read the data returned */
reg_val = E1000_READ_REG(hw, KUMCTRLSTA);
- *data = (uint16_t)reg_val;
+ *data = (u16)reg_val;
e1000_swfw_sync_release(hw, swfw);
return E1000_SUCCESS;
}
-static int32_t
+static s32
e1000_write_kmrn_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t data)
+ u32 reg_addr,
+ u16 data)
{
- uint32_t reg_val;
- uint16_t swfw;
+ u32 reg_val;
+ u16 swfw;
DEBUGFUNC("e1000_write_kmrn_reg");
if ((hw->mac_type == e1000_80003es2lan) &&
@@ -3788,13 +3788,13 @@ e1000_write_kmrn_reg(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-int32_t
+s32
e1000_phy_hw_reset(struct e1000_hw *hw)
{
- uint32_t ctrl, ctrl_ext;
- uint32_t led_ctrl;
- int32_t ret_val;
- uint16_t swfw;
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_phy_hw_reset");
@@ -3882,11 +3882,11 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
*
* Sets bit 15 of the MII Control register
******************************************************************************/
-int32_t
+s32
e1000_phy_reset(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_phy_reset");
@@ -3937,9 +3937,9 @@ e1000_phy_reset(struct e1000_hw *hw)
void
e1000_phy_powerdown_workaround(struct e1000_hw *hw)
{
- int32_t reg;
- uint16_t phy_data;
- int32_t retry = 0;
+ s32 reg;
+ u16 phy_data;
+ s32 retry = 0;
DEBUGFUNC("e1000_phy_powerdown_workaround");
@@ -3987,13 +3987,13 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
*
* hw - struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
{
- int32_t ret_val;
- int32_t reg;
- int32_t cnt;
- uint16_t phy_data;
+ s32 ret_val;
+ s32 reg;
+ s32 cnt;
+ u16 phy_data;
if (hw->kmrn_lock_loss_workaround_disabled)
return E1000_SUCCESS;
@@ -4040,11 +4040,11 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_detect_gig_phy(struct e1000_hw *hw)
{
- int32_t phy_init_status, ret_val;
- uint16_t phy_id_high, phy_id_low;
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
bool match = false;
DEBUGFUNC("e1000_detect_gig_phy");
@@ -4076,14 +4076,14 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw->phy_id = (uint32_t) (phy_id_high << 16);
+ hw->phy_id = (u32) (phy_id_high << 16);
udelay(20);
ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
if (ret_val)
return ret_val;
- hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
switch (hw->mac_type) {
case e1000_82543:
@@ -4136,10 +4136,10 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_phy_reset_dsp(struct e1000_hw *hw)
{
- int32_t ret_val;
+ s32 ret_val;
DEBUGFUNC("e1000_phy_reset_dsp");
do {
@@ -4163,12 +4163,12 @@ e1000_phy_reset_dsp(struct e1000_hw *hw)
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_igp_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data, min_length, max_length, average;
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_igp_get_info");
@@ -4240,12 +4240,12 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_ife_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_ife_get_info");
@@ -4290,12 +4290,12 @@ e1000_phy_ife_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_m88_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_m88_get_info");
@@ -4369,12 +4369,12 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-int32_t
+s32
e1000_phy_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_phy_get_info");
@@ -4415,7 +4415,7 @@ e1000_phy_get_info(struct e1000_hw *hw,
return e1000_phy_m88_get_info(hw, phy_info);
}
-int32_t
+s32
e1000_validate_mdi_setting(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_validate_mdi_settings");
@@ -4436,13 +4436,13 @@ e1000_validate_mdi_setting(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_init_eeprom_params(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd = E1000_READ_REG(hw, EECD);
- int32_t ret_val = E1000_SUCCESS;
- uint16_t eeprom_size;
+ u32 eecd = E1000_READ_REG(hw, EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
DEBUGFUNC("e1000_init_eeprom_params");
@@ -4561,8 +4561,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
break;
case e1000_ich8lan:
{
- int32_t i = 0;
- uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
+ s32 i = 0;
+ u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
eeprom->type = e1000_eeprom_ich8;
eeprom->use_eerd = false;
@@ -4586,7 +4586,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
- hw->flash_bank_size /= 2 * sizeof(uint16_t);
+ hw->flash_bank_size /= 2 * sizeof(u16);
break;
}
@@ -4611,7 +4611,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
if (eeprom_size)
eeprom_size++;
} else {
- eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
}
@@ -4628,7 +4628,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
*****************************************************************************/
static void
e1000_raise_ee_clk(struct e1000_hw *hw,
- uint32_t *eecd)
+ u32 *eecd)
{
/* Raise the clock input to the EEPROM (by setting the SK bit), and then
* wait <delay> microseconds.
@@ -4647,7 +4647,7 @@ e1000_raise_ee_clk(struct e1000_hw *hw,
*****************************************************************************/
static void
e1000_lower_ee_clk(struct e1000_hw *hw,
- uint32_t *eecd)
+ u32 *eecd)
{
/* Lower the clock input to the EEPROM (by clearing the SK bit), and then
* wait 50 microseconds.
@@ -4667,12 +4667,12 @@ e1000_lower_ee_clk(struct e1000_hw *hw,
*****************************************************************************/
static void
e1000_shift_out_ee_bits(struct e1000_hw *hw,
- uint16_t data,
- uint16_t count)
+ u16 data,
+ u16 count)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
- uint32_t mask;
+ u32 eecd;
+ u32 mask;
/* We need to shift "count" bits out to the EEPROM. So, value in the
* "data" parameter will be shifted out to the EEPROM one bit at a time.
@@ -4718,13 +4718,13 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static uint16_t
+static u16
e1000_shift_in_ee_bits(struct e1000_hw *hw,
- uint16_t count)
+ u16 count)
{
- uint32_t eecd;
- uint32_t i;
- uint16_t data;
+ u32 eecd;
+ u32 i;
+ u16 data;
/* In order to read a register from the EEPROM, we need to shift 'count'
* bits in from the EEPROM. Bits are "shifted in" by raising the clock
@@ -4762,11 +4762,11 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw,
* Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
* function should be called before issuing a command to the EEPROM.
*****************************************************************************/
-static int32_t
+static s32
e1000_acquire_eeprom(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd, i=0;
+ u32 eecd, i=0;
DEBUGFUNC("e1000_acquire_eeprom");
@@ -4825,7 +4825,7 @@ static void
e1000_standby_eeprom(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
+ u32 eecd;
eecd = E1000_READ_REG(hw, EECD);
@@ -4873,7 +4873,7 @@ e1000_standby_eeprom(struct e1000_hw *hw)
static void
e1000_release_eeprom(struct e1000_hw *hw)
{
- uint32_t eecd;
+ u32 eecd;
DEBUGFUNC("e1000_release_eeprom");
@@ -4921,11 +4921,11 @@ e1000_release_eeprom(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_spi_eeprom_ready(struct e1000_hw *hw)
{
- uint16_t retry_count = 0;
- uint8_t spi_stat_reg;
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
DEBUGFUNC("e1000_spi_eeprom_ready");
@@ -4938,7 +4938,7 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw)
do {
e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
hw->eeprom.opcode_bits);
- spi_stat_reg = (uint8_t)e1000_shift_in_ee_bits(hw, 8);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
break;
@@ -4967,14 +4967,14 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw)
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-int32_t
+s32
e1000_read_eeprom(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t i = 0;
+ u32 i = 0;
DEBUGFUNC("e1000_read_eeprom");
@@ -5012,8 +5012,8 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
* acquired the EEPROM at this point, so any returns should relase it */
if (eeprom->type == e1000_eeprom_spi) {
- uint16_t word_in;
- uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
if (e1000_spi_eeprom_ready(hw)) {
e1000_release_eeprom(hw);
@@ -5028,7 +5028,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset*2), eeprom->address_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
/* Read the data. The address of the eeprom internally increments with
* each byte (spi) being read, saving on the overhead of eeprom setup
@@ -5044,7 +5044,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset + i),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
eeprom->address_bits);
/* Read the data. For microwire, each word requires the overhead
@@ -5068,14 +5068,14 @@ e1000_read_eeprom(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_read_eeprom_eerd(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
- uint32_t i, eerd = 0;
- int32_t error = 0;
+ u32 i, eerd = 0;
+ s32 error = 0;
for (i = 0; i < words; i++) {
eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
@@ -5102,15 +5102,15 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_eewr(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
- uint32_t register_value = 0;
- uint32_t i = 0;
- int32_t error = 0;
+ u32 register_value = 0;
+ u32 i = 0;
+ s32 error = 0;
if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
return -E1000_ERR_SWFW_SYNC;
@@ -5143,12 +5143,12 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
{
- uint32_t attempts = 100000;
- uint32_t i, reg = 0;
- int32_t done = E1000_ERR_EEPROM;
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 done = E1000_ERR_EEPROM;
for (i = 0; i < attempts; i++) {
if (eerd == E1000_EEPROM_POLL_READ)
@@ -5174,7 +5174,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
static bool
e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
{
- uint32_t eecd = 0;
+ u32 eecd = 0;
DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
@@ -5204,11 +5204,11 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
* If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*****************************************************************************/
-int32_t
+s32
e1000_validate_eeprom_checksum(struct e1000_hw *hw)
{
- uint16_t checksum = 0;
- uint16_t i, eeprom_data;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
DEBUGFUNC("e1000_validate_eeprom_checksum");
@@ -5252,7 +5252,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
checksum += eeprom_data;
}
- if (checksum == (uint16_t) EEPROM_SUM)
+ if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
DEBUGOUT("EEPROM Checksum Invalid\n");
@@ -5268,12 +5268,12 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
* Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
* Writes the difference to word offset 63 of the EEPROM.
*****************************************************************************/
-int32_t
+s32
e1000_update_eeprom_checksum(struct e1000_hw *hw)
{
- uint32_t ctrl_ext;
- uint16_t checksum = 0;
- uint16_t i, eeprom_data;
+ u32 ctrl_ext;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
DEBUGFUNC("e1000_update_eeprom_checksum");
@@ -5284,7 +5284,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
}
checksum += eeprom_data;
}
- checksum = (uint16_t) EEPROM_SUM - checksum;
+ checksum = (u16) EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
DEBUGOUT("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
@@ -5313,14 +5313,14 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
* If e1000_update_eeprom_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
*****************************************************************************/
-int32_t
+s32
e1000_write_eeprom(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- int32_t status = 0;
+ s32 status = 0;
DEBUGFUNC("e1000_write_eeprom");
@@ -5370,19 +5370,19 @@ e1000_write_eeprom(struct e1000_hw *hw,
* data - pointer to array of 8 bit words to be written to the EEPROM
*
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_spi(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint16_t widx = 0;
+ u16 widx = 0;
DEBUGFUNC("e1000_write_eeprom_spi");
while (widx < words) {
- uint8_t write_opcode = EEPROM_WRITE_OPCODE_SPI;
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
@@ -5401,14 +5401,14 @@ e1000_write_eeprom_spi(struct e1000_hw *hw,
/* Send the Write command (8-bit opcode + addr) */
e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)((offset + widx)*2),
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
eeprom->address_bits);
/* Send the data */
/* Loop to allow for up to whole page write (32 bytes) of eeprom */
while (widx < words) {
- uint16_t word_out = data[widx];
+ u16 word_out = data[widx];
word_out = (word_out >> 8) | (word_out << 8);
e1000_shift_out_ee_bits(hw, word_out, 16);
widx++;
@@ -5436,16 +5436,16 @@ e1000_write_eeprom_spi(struct e1000_hw *hw,
* data - pointer to array of 16 bit words to be written to the EEPROM
*
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_microwire(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
- uint16_t words_written = 0;
- uint16_t i = 0;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
DEBUGFUNC("e1000_write_eeprom_microwire");
@@ -5456,9 +5456,9 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* EEPROM into write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (uint16_t)(eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (uint16_t)(eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
/* Prepare the EEPROM */
e1000_standby_eeprom(hw);
@@ -5468,7 +5468,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset + words_written),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
eeprom->address_bits);
/* Send the data */
@@ -5506,9 +5506,9 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* EEPROM out of write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (uint16_t)(eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (uint16_t)(eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
return E1000_SUCCESS;
}
@@ -5523,18 +5523,18 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_commit_shadow_ram(struct e1000_hw *hw)
{
- uint32_t attempts = 100000;
- uint32_t eecd = 0;
- uint32_t flop = 0;
- uint32_t i = 0;
- int32_t error = E1000_SUCCESS;
- uint32_t old_bank_offset = 0;
- uint32_t new_bank_offset = 0;
- uint8_t low_byte = 0;
- uint8_t high_byte = 0;
+ u32 attempts = 100000;
+ u32 eecd = 0;
+ u32 flop = 0;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 old_bank_offset = 0;
+ u32 new_bank_offset = 0;
+ u8 low_byte = 0;
+ u8 high_byte = 0;
bool sector_write_failed = false;
if (hw->mac_type == e1000_82573) {
@@ -5595,7 +5595,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
* in the other NVM bank or a modified value stored
* in the shadow RAM */
if (hw->eeprom_shadow_ram[i].modified) {
- low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+ low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
udelay(100);
error = e1000_verify_write_ich8_byte(hw,
(i << 1) + new_bank_offset, low_byte);
@@ -5604,7 +5604,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
sector_write_failed = true;
else {
high_byte =
- (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+ (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
udelay(100);
}
} else {
@@ -5687,11 +5687,11 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_read_mac_addr(struct e1000_hw * hw)
{
- uint16_t offset;
- uint16_t eeprom_data, i;
+ u16 offset;
+ u16 eeprom_data, i;
DEBUGFUNC("e1000_read_mac_addr");
@@ -5701,8 +5701,8 @@ e1000_read_mac_addr(struct e1000_hw * hw)
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
- hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF);
- hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8);
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i+1] = (u8) (eeprom_data >> 8);
}
switch (hw->mac_type) {
@@ -5734,8 +5734,8 @@ e1000_read_mac_addr(struct e1000_hw * hw)
static void
e1000_init_rx_addrs(struct e1000_hw *hw)
{
- uint32_t i;
- uint32_t rar_num;
+ u32 i;
+ u32 rar_num;
DEBUGFUNC("e1000_init_rx_addrs");
@@ -5770,11 +5770,11 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
* hw - Struct containing variables accessed by shared code
* mc_addr - the multicast address to hash
*****************************************************************************/
-uint32_t
+u32
e1000_hash_mc_addr(struct e1000_hw *hw,
- uint8_t *mc_addr)
+ u8 *mc_addr)
{
- uint32_t hash_value = 0;
+ u32 hash_value = 0;
/* The portion of the address that is used for the hash table is
* determined by the mc_filter_type setting.
@@ -5787,37 +5787,37 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
case 0:
if (hw->mac_type == e1000_ich8lan) {
/* [47:38] i.e. 0x158 for above example address */
- hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+ hash_value = ((mc_addr[4] >> 6) | (((u16) mc_addr[5]) << 2));
} else {
/* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
}
break;
case 1:
if (hw->mac_type == e1000_ich8lan) {
/* [46:37] i.e. 0x2B1 for above example address */
- hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+ hash_value = ((mc_addr[4] >> 5) | (((u16) mc_addr[5]) << 3));
} else {
/* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
}
break;
case 2:
if (hw->mac_type == e1000_ich8lan) {
/*[45:36] i.e. 0x163 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
} else {
/* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
}
break;
case 3:
if (hw->mac_type == e1000_ich8lan) {
/* [43:34] i.e. 0x18D for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
} else {
/* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
}
break;
}
@@ -5837,11 +5837,11 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_mta_set(struct e1000_hw *hw,
- uint32_t hash_value)
+ u32 hash_value)
{
- uint32_t hash_bit, hash_reg;
- uint32_t mta;
- uint32_t temp;
+ u32 hash_bit, hash_reg;
+ u32 mta;
+ u32 temp;
/* The MTA is a register array of 128 32-bit registers.
* It is treated like an array of 4096 bits. We want to set
@@ -5886,18 +5886,18 @@ e1000_mta_set(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_rar_set(struct e1000_hw *hw,
- uint8_t *addr,
- uint32_t index)
+ u8 *addr,
+ u32 index)
{
- uint32_t rar_low, rar_high;
+ u32 rar_low, rar_high;
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((uint32_t) addr[0] |
- ((uint32_t) addr[1] << 8) |
- ((uint32_t) addr[2] << 16) | ((uint32_t) addr[3] << 24));
- rar_high = ((uint32_t) addr[4] | ((uint32_t) addr[5] << 8));
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
/* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
* unit hang.
@@ -5944,10 +5944,10 @@ e1000_rar_set(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_write_vfta(struct e1000_hw *hw,
- uint32_t offset,
- uint32_t value)
+ u32 offset,
+ u32 value)
{
- uint32_t temp;
+ u32 temp;
if (hw->mac_type == e1000_ich8lan)
return;
@@ -5972,10 +5972,10 @@ e1000_write_vfta(struct e1000_hw *hw,
static void
e1000_clear_vfta(struct e1000_hw *hw)
{
- uint32_t offset;
- uint32_t vfta_value = 0;
- uint32_t vfta_offset = 0;
- uint32_t vfta_bit_in_reg = 0;
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
if (hw->mac_type == e1000_ich8lan)
return;
@@ -6003,15 +6003,15 @@ e1000_clear_vfta(struct e1000_hw *hw)
}
}
-static int32_t
+static s32
e1000_id_led_init(struct e1000_hw * hw)
{
- uint32_t ledctl;
- const uint32_t ledctl_mask = 0x000000FF;
- const uint32_t ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const uint32_t ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- uint16_t eeprom_data, i, temp;
- const uint16_t led_mask = 0x0F;
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
DEBUGFUNC("e1000_id_led_init");
@@ -6086,11 +6086,11 @@ e1000_id_led_init(struct e1000_hw * hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_setup_led(struct e1000_hw *hw)
{
- uint32_t ledctl;
- int32_t ret_val = E1000_SUCCESS;
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_setup_led");
@@ -6111,7 +6111,7 @@ e1000_setup_led(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (uint16_t)(hw->phy_spd_default &
+ (u16)(hw->phy_spd_default &
~IGP01E1000_GMII_SPD));
if (ret_val)
return ret_val;
@@ -6145,11 +6145,11 @@ e1000_setup_led(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_blink_led_start(struct e1000_hw *hw)
{
- int16_t i;
- uint32_t ledctl_blink = 0;
+ s16 i;
+ u32 ledctl_blink = 0;
DEBUGFUNC("e1000_id_led_blink_on");
@@ -6180,10 +6180,10 @@ e1000_blink_led_start(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_cleanup_led(struct e1000_hw *hw)
{
- int32_t ret_val = E1000_SUCCESS;
+ s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_cleanup_led");
@@ -6222,10 +6222,10 @@ e1000_cleanup_led(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_led_on(struct e1000_hw *hw)
{
- uint32_t ctrl = E1000_READ_REG(hw, CTRL);
+ u32 ctrl = E1000_READ_REG(hw, CTRL);
DEBUGFUNC("e1000_led_on");
@@ -6273,10 +6273,10 @@ e1000_led_on(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_led_off(struct e1000_hw *hw)
{
- uint32_t ctrl = E1000_READ_REG(hw, CTRL);
+ u32 ctrl = E1000_READ_REG(hw, CTRL);
DEBUGFUNC("e1000_led_off");
@@ -6327,7 +6327,7 @@ e1000_led_off(struct e1000_hw *hw)
static void
e1000_clear_hw_cntrs(struct e1000_hw *hw)
{
- volatile uint32_t temp;
+ volatile u32 temp;
temp = E1000_READ_REG(hw, CRCERRS);
temp = E1000_READ_REG(hw, SYMERRS);
@@ -6495,10 +6495,10 @@ e1000_update_adaptive(struct e1000_hw *hw)
void
e1000_tbi_adjust_stats(struct e1000_hw *hw,
struct e1000_hw_stats *stats,
- uint32_t frame_len,
- uint8_t *mac_addr)
+ u32 frame_len,
+ u8 *mac_addr)
{
- uint64_t carry_bit;
+ u64 carry_bit;
/* First adjust the frame length. */
frame_len--;
@@ -6527,7 +6527,7 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw,
* since the test for a multicast frame will test positive on
* a broadcast frame.
*/
- if ((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff))
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
/* Broadcast packet */
stats->bprc++;
else if (*mac_addr & 0x01)
@@ -6573,9 +6573,9 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw,
void
e1000_get_bus_info(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t pci_ex_link_status;
- uint32_t status;
+ s32 ret_val;
+ u16 pci_ex_link_status;
+ u32 status;
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -6647,8 +6647,8 @@ e1000_get_bus_info(struct e1000_hw *hw)
*****************************************************************************/
static void
e1000_write_reg_io(struct e1000_hw *hw,
- uint32_t offset,
- uint32_t value)
+ u32 offset,
+ u32 value)
{
unsigned long io_addr = hw->io_base;
unsigned long io_data = hw->io_base + 4;
@@ -6672,15 +6672,15 @@ e1000_write_reg_io(struct e1000_hw *hw,
* register to the minimum and maximum range.
* For IGP phy's, the function calculates the range by the AGC registers.
*****************************************************************************/
-static int32_t
+static s32
e1000_get_cable_length(struct e1000_hw *hw,
- uint16_t *min_length,
- uint16_t *max_length)
+ u16 *min_length,
+ u16 *max_length)
{
- int32_t ret_val;
- uint16_t agc_value = 0;
- uint16_t i, phy_data;
- uint16_t cable_length;
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
DEBUGFUNC("e1000_get_cable_length");
@@ -6751,9 +6751,9 @@ e1000_get_cable_length(struct e1000_hw *hw,
break;
}
} else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
- uint16_t cur_agc_value;
- uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_A,
IGP01E1000_PHY_AGC_B,
IGP01E1000_PHY_AGC_C,
@@ -6799,9 +6799,9 @@ e1000_get_cable_length(struct e1000_hw *hw,
IGP01E1000_AGC_RANGE;
} else if (hw->phy_type == e1000_phy_igp_2 ||
hw->phy_type == e1000_phy_igp_3) {
- uint16_t cur_agc_index, max_agc_index = 0;
- uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
- uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
{IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
@@ -6863,12 +6863,12 @@ e1000_get_cable_length(struct e1000_hw *hw,
* return 0. If the link speed is 1000 Mbps the polarity status is in the
* IGP01E1000_PHY_PCS_INIT_REG.
*****************************************************************************/
-static int32_t
+static s32
e1000_check_polarity(struct e1000_hw *hw,
e1000_rev_polarity *polarity)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_polarity");
@@ -6939,11 +6939,11 @@ e1000_check_polarity(struct e1000_hw *hw,
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
*****************************************************************************/
-static int32_t
+static s32
e1000_check_downshift(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_downshift");
@@ -6985,18 +6985,18 @@ e1000_check_downshift(struct e1000_hw *hw)
*
****************************************************************************/
-static int32_t
+static s32
e1000_config_dsp_after_link_change(struct e1000_hw *hw,
bool link_up)
{
- int32_t ret_val;
- uint16_t phy_data, phy_saved_data, speed, duplex, i;
- uint16_t dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_PARAM_A,
IGP01E1000_PHY_AGC_PARAM_B,
IGP01E1000_PHY_AGC_PARAM_C,
IGP01E1000_PHY_AGC_PARAM_D};
- uint16_t min_length, max_length;
+ u16 min_length, max_length;
DEBUGFUNC("e1000_config_dsp_after_link_change");
@@ -7038,8 +7038,8 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
(min_length < e1000_igp_cable_length_50)) {
- uint16_t ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
- uint32_t idle_errs = 0;
+ u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
/* clear previous idle error counts */
ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
@@ -7173,11 +7173,11 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
****************************************************************************/
-static int32_t
+static s32
e1000_set_phy_mode(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t eeprom_data;
+ s32 ret_val;
+ u16 eeprom_data;
DEBUGFUNC("e1000_set_phy_mode");
@@ -7218,13 +7218,13 @@ e1000_set_phy_mode(struct e1000_hw *hw)
*
****************************************************************************/
-static int32_t
+static s32
e1000_set_d3_lplu_state(struct e1000_hw *hw,
bool active)
{
- uint32_t phy_ctrl = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_set_d3_lplu_state");
if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
@@ -7348,13 +7348,13 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
*
****************************************************************************/
-static int32_t
+static s32
e1000_set_d0_lplu_state(struct e1000_hw *hw,
bool active)
{
- uint32_t phy_ctrl = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_set_d0_lplu_state");
if (hw->mac_type <= e1000_82547_rev_2)
@@ -7439,12 +7439,12 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_set_vco_speed(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t default_page = 0;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
DEBUGFUNC("e1000_set_vco_speed");
@@ -7503,18 +7503,18 @@ e1000_set_vco_speed(struct e1000_hw *hw)
*
* returns: - E1000_SUCCESS .
****************************************************************************/
-static int32_t
-e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
+static s32
+e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer)
{
- uint8_t i;
- uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
- uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
+ u8 i;
+ u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
length = (length >> 2);
offset = (offset >> 2);
for (i = 0; i < length; i++) {
- *((uint32_t *) buffer + i) =
+ *((u32 *) buffer + i) =
E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
}
return E1000_SUCCESS;
@@ -7530,11 +7530,11 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
* timeout
* - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_enable_host_if(struct e1000_hw * hw)
{
- uint32_t hicr;
- uint8_t i;
+ u32 hicr;
+ u8 i;
/* Check that the host interface is enabled. */
hicr = E1000_READ_REG(hw, HICR);
@@ -7564,14 +7564,14 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
-e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
- uint16_t length, uint16_t offset, uint8_t *sum)
+static s32
+e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
{
- uint8_t *tmp;
- uint8_t *bufptr = buffer;
- uint32_t data = 0;
- uint16_t remaining, i, j, prev_bytes;
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
/* sum = only sum of the data and it is not checksum */
@@ -7579,14 +7579,14 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
return -E1000_ERR_PARAM;
}
- tmp = (uint8_t *)&data;
+ tmp = (u8 *)&data;
prev_bytes = offset & 0x3;
offset &= 0xFFFC;
offset >>= 2;
if (prev_bytes) {
data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
- for (j = prev_bytes; j < sizeof(uint32_t); j++) {
+ for (j = prev_bytes; j < sizeof(u32); j++) {
*(tmp + j) = *bufptr++;
*sum += *(tmp + j);
}
@@ -7604,7 +7604,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
/* The device driver writes the relevant command block into the
* ram area. */
for (i = 0; i < length; i++) {
- for (j = 0; j < sizeof(uint32_t); j++) {
+ for (j = 0; j < sizeof(u32); j++) {
*(tmp + j) = *bufptr++;
*sum += *(tmp + j);
}
@@ -7612,7 +7612,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
}
if (remaining) {
- for (j = 0; j < sizeof(uint32_t); j++) {
+ for (j = 0; j < sizeof(u32); j++) {
if (j < remaining)
*(tmp + j) = *bufptr++;
else
@@ -7632,23 +7632,23 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_write_cmd_header(struct e1000_hw * hw,
struct e1000_host_mng_command_header * hdr)
{
- uint16_t i;
- uint8_t sum;
- uint8_t *buffer;
+ u16 i;
+ u8 sum;
+ u8 *buffer;
/* Write the whole command header structure which includes sum of
* the buffer */
- uint16_t length = sizeof(struct e1000_host_mng_command_header);
+ u16 length = sizeof(struct e1000_host_mng_command_header);
sum = hdr->checksum;
hdr->checksum = 0;
- buffer = (uint8_t *) hdr;
+ buffer = (u8 *) hdr;
i = length;
while (i--)
sum += buffer[i];
@@ -7658,7 +7658,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
length >>= 2;
/* The device driver writes the relevant command block into the ram area. */
for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i));
E1000_WRITE_FLUSH(hw);
}
@@ -7672,10 +7672,10 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_write_commit(struct e1000_hw * hw)
{
- uint32_t hicr;
+ u32 hicr;
hicr = E1000_READ_REG(hw, HICR);
/* Setting this bit tells the ARC that a new command is pending. */
@@ -7693,7 +7693,7 @@ e1000_mng_write_commit(struct e1000_hw * hw)
bool
e1000_check_mng_mode(struct e1000_hw *hw)
{
- uint32_t fwsm;
+ u32 fwsm;
fwsm = E1000_READ_REG(hw, FWSM);
@@ -7712,11 +7712,11 @@ e1000_check_mng_mode(struct e1000_hw *hw)
/*****************************************************************************
* This function writes the dhcp info .
****************************************************************************/
-int32_t
-e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer,
- uint16_t length)
+s32
+e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer,
+ u16 length)
{
- int32_t ret_val;
+ s32 ret_val;
struct e1000_host_mng_command_header hdr;
hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
@@ -7744,11 +7744,11 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer,
*
* returns - checksum of buffer contents.
****************************************************************************/
-static uint8_t
-e1000_calculate_mng_checksum(char *buffer, uint32_t length)
+static u8
+e1000_calculate_mng_checksum(char *buffer, u32 length)
{
- uint8_t sum = 0;
- uint32_t i;
+ u8 sum = 0;
+ u32 i;
if (!buffer)
return 0;
@@ -7756,7 +7756,7 @@ e1000_calculate_mng_checksum(char *buffer, uint32_t length)
for (i=0; i < length; i++)
sum += buffer[i];
- return (uint8_t) (0 - sum);
+ return (u8) (0 - sum);
}
/*****************************************************************************
@@ -7769,10 +7769,10 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
{
/* called in init as well as watchdog timer functions */
- int32_t ret_val, checksum;
+ s32 ret_val, checksum;
bool tx_filter = false;
struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
- uint8_t *buffer = (uint8_t *) &(hw->mng_cookie);
+ u8 *buffer = (u8 *) &(hw->mng_cookie);
if (e1000_check_mng_mode(hw)) {
ret_val = e1000_mng_enable_host_if(hw);
@@ -7806,11 +7806,11 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
* returns: - true/false
*
*****************************************************************************/
-uint32_t
+u32
e1000_enable_mng_pass_thru(struct e1000_hw *hw)
{
- uint32_t manc;
- uint32_t fwsm, factps;
+ u32 manc;
+ u32 fwsm, factps;
if (hw->asf_firmware_present) {
manc = E1000_READ_REG(hw, MANC);
@@ -7832,12 +7832,12 @@ e1000_enable_mng_pass_thru(struct e1000_hw *hw)
return false;
}
-static int32_t
+static s32
e1000_polarity_reversal_workaround(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_status_reg;
- uint16_t i;
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
/* Polarity reversal workaround for forced 10F/10H links. */
@@ -7929,7 +7929,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw)
static void
e1000_set_pci_express_master_disable(struct e1000_hw *hw)
{
- uint32_t ctrl;
+ u32 ctrl;
DEBUGFUNC("e1000_set_pci_express_master_disable");
@@ -7952,10 +7952,10 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
* E1000_SUCCESS master requests disabled.
*
******************************************************************************/
-int32_t
+s32
e1000_disable_pciex_master(struct e1000_hw *hw)
{
- int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+ s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
DEBUGFUNC("e1000_disable_pciex_master");
@@ -7990,10 +7990,10 @@ e1000_disable_pciex_master(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
******************************************************************************/
-static int32_t
+static s32
e1000_get_auto_rd_done(struct e1000_hw *hw)
{
- int32_t timeout = AUTO_READ_DONE_TIMEOUT;
+ s32 timeout = AUTO_READ_DONE_TIMEOUT;
DEBUGFUNC("e1000_get_auto_rd_done");
@@ -8038,11 +8038,11 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_phy_cfg_done(struct e1000_hw *hw)
{
- int32_t timeout = PHY_CFG_TIMEOUT;
- uint32_t cfg_mask = E1000_EEPROM_CFG_DONE;
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 cfg_mask = E1000_EEPROM_CFG_DONE;
DEBUGFUNC("e1000_get_phy_cfg_done");
@@ -8085,11 +8085,11 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
{
- int32_t timeout;
- uint32_t swsm;
+ s32 timeout;
+ u32 swsm;
DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
@@ -8138,7 +8138,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
static void
e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
{
- uint32_t swsm;
+ u32 swsm;
DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
@@ -8164,11 +8164,11 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_software_semaphore(struct e1000_hw *hw)
{
- int32_t timeout = hw->eeprom.word_size + 1;
- uint32_t swsm;
+ s32 timeout = hw->eeprom.word_size + 1;
+ u32 swsm;
DEBUGFUNC("e1000_get_software_semaphore");
@@ -8203,7 +8203,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
static void
e1000_release_software_semaphore(struct e1000_hw *hw)
{
- uint32_t swsm;
+ u32 swsm;
DEBUGFUNC("e1000_release_software_semaphore");
@@ -8228,11 +8228,11 @@ e1000_release_software_semaphore(struct e1000_hw *hw)
* E1000_SUCCESS
*
*****************************************************************************/
-int32_t
+s32
e1000_check_phy_reset_block(struct e1000_hw *hw)
{
- uint32_t manc = 0;
- uint32_t fwsm = 0;
+ u32 manc = 0;
+ u32 fwsm = 0;
if (hw->mac_type == e1000_ich8lan) {
fwsm = E1000_READ_REG(hw, FWSM);
@@ -8246,10 +8246,10 @@ e1000_check_phy_reset_block(struct e1000_hw *hw)
E1000_BLK_PHY_RESET : E1000_SUCCESS;
}
-static uint8_t
+static u8
e1000_arc_subsystem_valid(struct e1000_hw *hw)
{
- uint32_t fwsm;
+ u32 fwsm;
/* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
* may not be provided a DMA clock when no manageability features are
@@ -8283,10 +8283,10 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
* returns: E1000_SUCCESS
*
*****************************************************************************/
-static int32_t
-e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+static s32
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
{
- uint32_t gcr_reg = 0;
+ u32 gcr_reg = 0;
DEBUGFUNC("e1000_set_pci_ex_no_snoop");
@@ -8303,7 +8303,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
E1000_WRITE_REG(hw, GCR, gcr_reg);
}
if (hw->mac_type == e1000_ich8lan) {
- uint32_t ctrl_ext;
+ u32 ctrl_ext;
E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
@@ -8324,11 +8324,11 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_software_flag(struct e1000_hw *hw)
{
- int32_t timeout = PHY_CFG_TIMEOUT;
- uint32_t extcnf_ctrl;
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl;
DEBUGFUNC("e1000_get_software_flag");
@@ -8366,7 +8366,7 @@ e1000_get_software_flag(struct e1000_hw *hw)
static void
e1000_release_software_flag(struct e1000_hw *hw)
{
- uint32_t extcnf_ctrl;
+ u32 extcnf_ctrl;
DEBUGFUNC("e1000_release_software_flag");
@@ -8388,16 +8388,16 @@ e1000_release_software_flag(struct e1000_hw *hw)
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
-e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
- uint16_t *data)
+static s32
+e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- int32_t error = E1000_SUCCESS;
- uint32_t flash_bank = 0;
- uint32_t act_offset = 0;
- uint32_t bank_offset = 0;
- uint16_t word = 0;
- uint16_t i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 flash_bank = 0;
+ u32 act_offset = 0;
+ u32 bank_offset = 0;
+ u16 word = 0;
+ u16 i = 0;
/* We need to know which is the valid flash bank. In the event
* that we didn't allocate eeprom_shadow_ram, we may not be
@@ -8444,12 +8444,12 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
* words - number of words to write
* data - words to write to the EEPROM
*****************************************************************************/
-static int32_t
-e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
- uint16_t *data)
+static s32
+e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- uint32_t i = 0;
- int32_t error = E1000_SUCCESS;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
error = e1000_get_software_flag(hw);
if (error != E1000_SUCCESS)
@@ -8491,12 +8491,12 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
*
* hw - The pointer to the hw structure
****************************************************************************/
-static int32_t
+static s32
e1000_ich8_cycle_init(struct e1000_hw *hw)
{
union ich8_hws_flash_status hsfsts;
- int32_t error = E1000_ERR_EEPROM;
- int32_t i = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 i = 0;
DEBUGFUNC("e1000_ich8_cycle_init");
@@ -8558,13 +8558,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
*
* hw - The pointer to the hw structure
****************************************************************************/
-static int32_t
-e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+static s32
+e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
{
union ich8_hws_flash_ctrl hsflctl;
union ich8_hws_flash_status hsfsts;
- int32_t error = E1000_ERR_EEPROM;
- uint32_t i = 0;
+ s32 error = E1000_ERR_EEPROM;
+ u32 i = 0;
/* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
@@ -8593,16 +8593,16 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
* size - Size of data to read, 1=byte 2=word
* data - Pointer to the word to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
- uint32_t size, uint16_t* data)
+static s32
+e1000_read_ich8_data(struct e1000_hw *hw, u32 index,
+ u32 size, u16* data)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- uint32_t flash_data = 0;
- int32_t error = -E1000_ERR_EEPROM;
- int32_t count = 0;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
DEBUGFUNC("e1000_read_ich8_data");
@@ -8640,9 +8640,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
if (error == E1000_SUCCESS) {
flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
if (size == 1) {
- *data = (uint8_t)(flash_data & 0x000000FF);
+ *data = (u8)(flash_data & 0x000000FF);
} else if (size == 2) {
- *data = (uint16_t)(flash_data & 0x0000FFFF);
+ *data = (u16)(flash_data & 0x0000FFFF);
}
break;
} else {
@@ -8672,16 +8672,16 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
* size - Size of data to read, 1=byte 2=word
* data - The byte(s) to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
- uint16_t data)
+static s32
+e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- uint32_t flash_data = 0;
- int32_t error = -E1000_ERR_EEPROM;
- int32_t count = 0;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
DEBUGFUNC("e1000_write_ich8_data");
@@ -8710,9 +8710,9 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
if (size == 1)
- flash_data = (uint32_t)data & 0x00FF;
+ flash_data = (u32)data & 0x00FF;
else
- flash_data = (uint32_t)data;
+ flash_data = (u32)data;
E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
@@ -8747,15 +8747,15 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
* index - The index of the byte to read.
* data - Pointer to a byte to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+static s32
+e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data)
{
- int32_t status = E1000_SUCCESS;
- uint16_t word = 0;
+ s32 status = E1000_SUCCESS;
+ u16 word = 0;
status = e1000_read_ich8_data(hw, index, 1, &word);
if (status == E1000_SUCCESS) {
- *data = (uint8_t)word;
+ *data = (u8)word;
}
return status;
@@ -8770,11 +8770,11 @@ e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
* index - The index of the byte to write.
* byte - The byte to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+static s32
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
{
- int32_t error = E1000_SUCCESS;
- int32_t program_retries = 0;
+ s32 error = E1000_SUCCESS;
+ s32 program_retries = 0;
DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
@@ -8803,11 +8803,11 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
* index - The index of the byte to read.
* data - The byte to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+static s32
+e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
{
- int32_t status = E1000_SUCCESS;
- uint16_t word = (uint16_t)data;
+ s32 status = E1000_SUCCESS;
+ u16 word = (u16)data;
status = e1000_write_ich8_data(hw, index, 1, word);
@@ -8821,10 +8821,10 @@ e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
* index - The starting byte index of the word to read.
* data - Pointer to a word to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+static s32
+e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
{
- int32_t status = E1000_SUCCESS;
+ s32 status = E1000_SUCCESS;
status = e1000_read_ich8_data(hw, index, 2, data);
return status;
}
@@ -8840,19 +8840,19 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
* amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
* bank size may be 4, 8 or 64 KBytes
*****************************************************************************/
-static int32_t
-e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
+static s32
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- int32_t count = 0;
- int32_t error = E1000_ERR_EEPROM;
- int32_t iteration;
- int32_t sub_sector_size = 0;
- int32_t bank_size;
- int32_t j = 0;
- int32_t error_flag = 0;
+ u32 flash_linear_address;
+ s32 count = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 iteration;
+ s32 sub_sector_size = 0;
+ s32 bank_size;
+ s32 j = 0;
+ s32 error_flag = 0;
hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
@@ -8930,16 +8930,16 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
return error;
}
-static int32_t
+static s32
e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
- uint32_t cnf_base_addr, uint32_t cnf_size)
+ u32 cnf_base_addr, u32 cnf_size)
{
- uint32_t ret_val = E1000_SUCCESS;
- uint16_t word_addr, reg_data, reg_addr;
- uint16_t i;
+ u32 ret_val = E1000_SUCCESS;
+ u16 word_addr, reg_data, reg_addr;
+ u16 i;
/* cnf_base_addr is in DWORD */
- word_addr = (uint16_t)(cnf_base_addr << 1);
+ word_addr = (u16)(cnf_base_addr << 1);
/* cnf_size is returned in size of dwords */
for (i = 0; i < cnf_size; i++) {
@@ -8955,7 +8955,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
if (ret_val != E1000_SUCCESS)
return ret_val;
- ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+ ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
e1000_release_software_flag(hw);
}
@@ -8972,10 +8972,10 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
*
* hw: Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_init_lcd_from_nvm(struct e1000_hw *hw)
{
- uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+ u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
if (hw->phy_type != e1000_phy_igp_3)
return E1000_SUCCESS;