Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

1 files changed, 14 insertions, 9 deletions

diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 80b3c319f69..1ac49139158 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev)
 
 select_timeout:
 	if (dev->rx_fan_input_inuse) {
-		dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+		dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
 
 		/* Fan input doesn't support timeouts, it just ends the
 			input with a maximum sample */
 		dev->rdev->min_timeout = dev->rdev->max_timeout =
-			MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+			US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
 				ENE_FW_SAMPLE_PERIOD_FAN);
 	} else {
-		dev->rdev->rx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->rx_resolution = US_TO_NS(sample_period);
 
 		/* Theoreticly timeout is unlimited, but we cap it
 		 * because it was seen that on one device, it
 		 * would stop sending spaces after around 250 msec.
 		 * Besides, this is close to 2^32 anyway and timeout is u32.
 		 */
-		dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
-		dev->rdev->max_timeout = MS_TO_NS(200000);
+		dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
+		dev->rdev->max_timeout = US_TO_NS(200000);
 	}
 
 	if (dev->hw_learning_and_tx_capable)
-		dev->rdev->tx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->tx_resolution = US_TO_NS(sample_period);
 
 	if (dev->rdev->timeout > dev->rdev->max_timeout)
 		dev->rdev->timeout = dev->rdev->max_timeout;
@@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data)
 
 		dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
 
-		ev.duration = MS_TO_NS(hw_sample);
+		ev.duration = US_TO_NS(hw_sample);
 		ev.pulse = pulse;
 		ir_raw_event_store_with_filter(dev->rdev, &ev);
 	}
@@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
 	dev->learning_mode_enabled = learning_mode_force;
 
 	/* Set reasonable default timeout */
-	dev->rdev->timeout = MS_TO_NS(150000);
+	dev->rdev->timeout = US_TO_NS(150000);
 }
 
 /* Upload all hardware settings at once. Used at load and resume time */
@@ -1004,6 +1004,10 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	/* validate resources */
 	error = -ENODEV;
 
+	/* init these to -1, as 0 is valid for both */
+	dev->hw_io = -1;
+	dev->irq = -1;
+
 	if (!pnp_port_valid(pnp_dev, 0) ||
 	    pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
 		goto error;
@@ -1072,6 +1076,8 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 		rdev->input_name = "ENE eHome Infrared Remote Transceiver";
 	}
 
+	dev->rdev = rdev;
+
 	ene_rx_setup_hw_buffer(dev);
 	ene_setup_default_settings(dev);
 	ene_setup_hw_settings(dev);
@@ -1083,7 +1089,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	if (error < 0)
 		goto error;
 
-	dev->rdev = rdev;
 	ene_notice("driver has been succesfully loaded");
 	return 0;
 error: