aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2011-10-31 23:46:42 +0100
committerArnd Bergmann <arnd@arndb.de>2011-10-31 23:46:42 +0100
commitefa62e1355f0495f37f1296754b8880947c8da72 (patch)
treec07af29f8baf2e6f4ed3bedbe46d405924edd530 /drivers/gpio
parent107532920226a37e595697959b2a6a823cfa2497 (diff)
parentf55be1bf52aad524dc1bf556ae26c90262c87825 (diff)
Merge branch 'depends/rmk/gpio' into next/devel
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig9
-rw-r--r--drivers/gpio/Makefile7
-rw-r--r--drivers/gpio/gpio-davinci.c455
-rw-r--r--drivers/gpio/gpio-ep93xx.c22
-rw-r--r--drivers/gpio/gpio-ks8695.c319
-rw-r--r--drivers/gpio/gpio-lpc32xx.c446
-rw-r--r--drivers/gpio/gpio-nomadik.c3
-rw-r--r--drivers/gpio/gpio-omap.c2
-rw-r--r--drivers/gpio/gpio-pxa.c338
-rw-r--r--drivers/gpio/gpio-sa1100.c63
-rw-r--r--drivers/gpio/gpio-tegra.c23
-rw-r--r--drivers/gpio/gpio-tnetv107x.c205
-rw-r--r--drivers/gpio/gpio-u300.c1190
13 files changed, 2586 insertions, 496 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd96d4..4caa3d37bbd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,6 +178,15 @@ config GPIO_SCH
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948c96f..19c5d27b6d2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
@@ -37,18 +40,20 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 00000000000..df0d59570a8
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,455 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+struct davinci_gpio_regs {
+ u32 dir;
+ u32 out_data;
+ u32 set_data;
+ u32 clr_data;
+ u32 in_data;
+ u32 set_rising;
+ u32 clr_rising;
+ u32 set_falling;
+ u32 clr_falling;
+ u32 intstat;
+};
+
+#define chip2controller(chip) \
+ container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+ void __iomem *ptr;
+
+ if (gpio < 32 * 1)
+ ptr = gpio_base + 0x10;
+ else if (gpio < 32 * 2)
+ ptr = gpio_base + 0x38;
+ else if (gpio < 32 * 3)
+ ptr = gpio_base + 0x60;
+ else if (gpio < 32 * 4)
+ ptr = gpio_base + 0x88;
+ else if (gpio < 32 * 5)
+ ptr = gpio_base + 0xb0;
+ else
+ ptr = NULL;
+ return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+ struct davinci_gpio_regs __iomem *g;
+
+ g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
+
+ return g;
+}
+
+static int __init davinci_gpio_irq_setup(void);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+ unsigned offset, bool out, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+ unsigned long flags;
+ u32 temp;
+ u32 mask = 1 << offset;
+
+ spin_lock_irqsave(&d->lock, flags);
+ temp = __raw_readl(&g->dir);
+ if (out) {
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
+ } else {
+ temp |= mask;
+ }
+ __raw_writel(temp, &g->dir);
+ spin_unlock_irqrestore(&d->lock, flags);
+
+ return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+ return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ return (1 << offset) & __raw_readl(&g->in_data);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+ int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs *regs;
+
+ if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+ return 0;
+
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+ if (WARN_ON(!gpio_base))
+ return -ENOMEM;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+ chips[i].chip.label = "DaVinci";
+
+ chips[i].chip.direction_input = davinci_direction_in;
+ chips[i].chip.get = davinci_gpio_get;
+ chips[i].chip.direction_output = davinci_direction_out;
+ chips[i].chip.set = davinci_gpio_set;
+
+ chips[i].chip.base = base;
+ chips[i].chip.ngpio = ngpio - base;
+ if (chips[i].chip.ngpio > 32)
+ chips[i].chip.ngpio = 32;
+
+ spin_lock_init(&chips[i].lock);
+
+ regs = gpio2regs(base);
+ chips[i].regs = regs;
+ chips[i].set_data = &regs->set_data;
+ chips[i].clr_data = &regs->clr_data;
+ chips[i].in_data = &regs->in_data;
+
+ gpiochip_add(&chips[i].chip);
+ }
+
+ soc_info->gpio_ctlrs = chips;
+ soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
+ davinci_gpio_irq_setup();
+ return 0;
+}
+pure_initcall(davinci_gpio_setup);
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ __raw_writel(mask, &g->clr_falling);
+ __raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+ unsigned status = irqd_get_trigger_type(d);
+
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+ if (status & IRQ_TYPE_EDGE_FALLING)
+ __raw_writel(mask, &g->set_falling);
+ if (status & IRQ_TYPE_EDGE_RISING)
+ __raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .irq_enable = gpio_irq_enable,
+ .irq_disable = gpio_irq_disable,
+ .irq_set_type = gpio_irq_type,
+ .flags = IRQCHIP_SET_TYPE_MASKED,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct davinci_gpio_regs __iomem *g;
+ u32 mask = 0xffff;
+ struct davinci_gpio_controller *d;
+
+ d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+ g = (struct davinci_gpio_regs __iomem *)d->regs;
+
+ /* we only care about one bank */
+ if (irq & 1)
+ mask <<= 16;
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ while (1) {
+ u32 status;
+ int n;
+ int res;
+
+ /* ack any irqs */
+ status = __raw_readl(&g->intstat) & mask;
+ if (!status)
+ break;
+ __raw_writel(status, &g->intstat);
+
+ /* now demux them to the right lowlevel handler */
+ n = d->irq_base;
+ if (irq & 1) {
+ n += 16;
+ status >>= 16;
+ }
+
+ while (status) {
+ res = ffs(status);
+ n += res;
+ generic_handle_irq(n - 1);
+ status >>= res;
+ }
+ }
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ /* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+
+ if (d->irq_base >= 0)
+ return d->irq_base + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ /* NOTE: we assume for now that only irqs in the first gpio_chip
+ * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+ */
+ if (offset < soc_info->gpio_unbanked)
+ return soc_info->gpio_irq + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+
+ return 0;
+}
+
+/*
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+ unsigned gpio, irq, bank;
+ struct clk *clk;
+ u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs __iomem *g;
+
+ ngpio = soc_info->gpio_num;
+
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(NULL, "gpio");
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "Error %ld getting gpio clock?\n",
+ PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ clk_enable(clk);
+
+ /* Arrange gpio_to_irq() support, handling either direct IRQs or
+ * banked IRQs. Having GPIOs in the first GPIO bank use direct
+ * IRQs, while the others use banked IRQs, would need some setup
+ * tweaks to recognize hardware which can do that.
+ */
+ for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+ chips[bank].chip.to_irq = gpio_to_irq_banked;
+ chips[bank].irq_base = soc_info->gpio_unbanked
+ ? -EINVAL
+ : (soc_info->intc_irq_num + gpio);
+ }
+
+ /*
+ * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+ * controller only handling trigger modes. We currently assume no
+ * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+ */
+ if (soc_info->gpio_unbanked) {
+ static struct irq_chip gpio_irqchip_unbanked;
+
+ /* pass "bank 0" GPIO IRQs to AINTC */
+ chips[0].chip.to_irq = gpio_to_irq_unbanked;
+ binten = BIT(0);
+
+ /* AINTC handles mask/unmask; GPIO handles triggering */
+ irq = bank_irq;
+ gpio_irqchip_unbanked = *irq_get_chip(irq);
+ gpio_irqchip_unbanked.name = "GPIO-AINTC";
+ gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+
+ /* default trigger: both edges */
+ g = gpio2regs(0);
+ __raw_writel(~0, &g->set_falling);
+ __raw_writel(~0, &g->set_rising);
+
+ /* set the direct IRQs up to use that irqchip */
+ for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+ irq_set_chip(irq, &gpio_irqchip_unbanked);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
+ }
+
+ goto done;
+ }
+
+ /*
+ * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+ * then chain through our own handler.
+ */
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
+ unsigned i;
+
+ /* disabled by default, enabled only as needed */
+ g = gpio2regs(gpio);
+ __raw_writel(~0, &g->clr_falling);
+ __raw_writel(~0, &g->clr_rising);
+
+ /* set up all irqs in this bank */
+ irq_set_chained_handler(bank_irq, gpio_irq_handler);
+
+ /*
+ * Each chip handles 32 gpios, and each irq bank consists of 16
+ * gpio irqs. Pass the irq bank's corresponding controller to
+ * the chained irq handler.
+ */
+ irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
+ irq_set_chip(irq, &gpio_irqchip);
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_handler(irq, handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ binten |= BIT(bank);
+ }
+
+done:
+ /* BINTEN -- per-bank interrupt enable. genirq would also let these
+ * bits be set/cleared dynamically.
+ */
+ __raw_writel(binten, gpio_base + 0x08);
+
+ printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+ return 0;
+}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c66532..7aafbb43733 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
struct ep93xx_gpio {
void __iomem *mmio_base;
@@ -307,6 +310,21 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
return 0;
}
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+ return -EINVAL;
+
+ return 64 + gpio;
+}
+
static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
{
@@ -321,8 +339,10 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
bgc->gc.label = bank->label;
bgc->gc.base = bank->base;
- if (bank->has_debounce)
+ if (bank->has_debounce) {
bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+ bgc->gc.to_irq = ep93xx_gpio_to_irq;
+ }
return gpiochip_add(&bgc->gc);
}
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
new file mode 100644
index 00000000000..a3ac66ea364
--- /dev/null
+++ b/drivers/gpio/gpio-ks8695.c
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */
+ return;
+
+ local_irq_save(flags);
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ if (gpio) /* GPIO: set bit to 0 */
+ x &= ~enable[pin];
+ else /* Internal function: set bit to 1 */
+ x |= enable[pin];
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+ local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ /* Set IRQ triggering type */
+ irq_set_irq_type(gpio_irq[pin], type);
+
+ /* enable interrupt mode */
+ ks8695_gpio_mode(pin, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int pin, int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= IOPD(pin);
+ else
+ x &= ~IOPD(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ /* set pin as output */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x |= IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+ unsigned int pin, int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return;
+
+ local_irq_save(flags);
+
+ /* set output line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= IOPD(pin);
+ else
+ x &= ~IOPD(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ local_irq_restore(flags);
+}
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
+{
+ unsigned long x;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ return (x & IOPD(pin)) != 0;
+}
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
+{
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ return gpio_irq[pin];
+}
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+ if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+ return -EINVAL;
+
+ return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+ .label = "KS8695",
+ .direction_input = ks8695_gpio_direction_input,
+ .direction_output = ks8695_gpio_direction_output,
+ .get = ks8695_gpio_get_value,
+ .set = ks8695_gpio_set_value,
+ .to_irq = ks8695_gpio_to_irq,
+ .base = 0,
+ .ngpio = 16,
+ .can_sleep = 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+ if (gpiochip_add(&ks8695_gpio_chip))
+ printk(KERN_ERR "Unable to register core GPIOs\n");
+}
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+ unsigned long mode, ctrl, data;
+ int i;
+
+ mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+ seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+ for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+ seq_printf(s, "%i:\t", i);
+
+ seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
+
+ if (i <= KS8695_GPIO_3) {
+ if (ctrl & enable[i]) {
+ seq_printf(s, "EXT%i ", i);
+
+ switch ((ctrl & intmask[i]) >> (4 * i)) {
+ case IOPC_TM_LOW:
+ seq_printf(s, "(Low)"); break;
+ case IOPC_TM_HIGH:
+ seq_printf(s, "(High)"); break;
+ case IOPC_TM_RISING:
+ seq_printf(s, "(Rising)"); break;
+ case IOPC_TM_FALLING:
+ seq_printf(s, "(Falling)"); break;
+ case IOPC_TM_EDGE:
+ seq_printf(s, "(Edges)"); break;
+ }
+ }
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else if (i <= KS8695_GPIO_5) {
+ if (ctrl & enable[i])
+ seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else
+ seq_printf(s, "GPIO\t");
+
+ seq_printf(s, "\t");
+
+ seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
+ }
+ return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+ .open = ks8695_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/ks8695_gpio */
+ (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+ return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
new file mode 100644
index 00000000000..5b6948081f8
--- /dev/null
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
+
+#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x) (1 << (x))
+#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x) (1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+
+struct gpio_regs {
+ void __iomem *inp_state;
+ void __iomem *outp_set;
+ void __iomem *outp_clr;
+ void __iomem *dir_set;
+ void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+ "p0.0", "p0.1", "p0.2", "p0.3",
+ "p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+ "p1.0", "p1.1", "p1.2", "p1.3",
+ "p1.4", "p1.5", "p1.6", "p1.7",
+ "p1.8", "p1.9", "p1.10", "p1.11",
+ "p1.12", "p1.13", "p1.14", "p1.15",
+ "p1.16", "p1.17", "p1.18", "p1.19",
+ "p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+ "p2.0", "p2.1", "p2.2", "p2.3",
+ "p2.4", "p2.5", "p2.6", "p2.7",
+ "p2.8", "p2.9", "p2.10", "p2.11",
+ "p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+ "gpi000", "gpio01", "gpio02", "gpio03",
+ "gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+ "gpi00", "gpi01", "gpi02", "gpi03",
+ "gpi04", "gpi05", "gpi06", "gpi07",
+ "gpi08", "gpi09", NULL, NULL,
+ NULL, NULL, NULL, "gpi15",
+ "gpi16", "gpi17", "gpi18", "gpi19",
+ "gpi20", "gpi21", "gpi22", "gpi23",
+ "gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+ "gpo00", "gpo01", "gpo02", "gpo03",
+ "gpo04", "gpo05", "gpo06", "gpo07",
+ "gpo08", "gpo09", "gpo10", "gpo11",
+ "gpo12", "gpo13", "gpo14", "gpo15",
+ "gpo16", "gpo17", "gpo18", "gpo19",
+ "gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+ .inp_state = LPC32XX_GPIO_P0_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P0_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P0_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+ .inp_state = LPC32XX_GPIO_P1_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P1_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P1_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+ .inp_state = LPC32XX_GPIO_P2_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P2_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+ .inp_state = LPC32XX_GPIO_P3_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P3_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+ struct gpio_chip chip;
+ struct gpio_regs *gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+ struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ if (input)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_clr);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (input)
+ __raw_writel(u, group->gpio_grp->dir_clr);
+ else
+ __raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (high)
+ __raw_writel(u, group->gpio_grp->outp_set);
+ else
+ __raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+ pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ int state = __raw_readl(group->gpio_grp->inp_state);
+
+ /*
+ * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+ * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+ */
+ return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+ unsigned pin)
+{
+ return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+ if (pin < chip->ngpio)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+ {
+ .chip = {
+ .label = "gpio_p0",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P0_GRP,
+ .ngpio = LPC32XX_GPIO_P0_MAX,
+ .names = gpio_p0_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p0,
+ },
+ {
+ .chip = {
+ .label = "gpio_p1",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P1_GRP,
+ .ngpio = LPC32XX_GPIO_P1_MAX,
+ .names = gpio_p1_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p1,
+ },
+ {
+ .chip = {
+ .label = "gpio_p2",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P2_GRP,
+ .ngpio = LPC32XX_GPIO_P2_MAX,
+ .names = gpio_p2_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p2,
+ },
+ {
+ .chip = {
+ .label = "gpio_p3",
+ .direction_input = lpc32xx_gpio_dir_input_p3,
+ .get = lpc32xx_gpio_get_value_p3,
+ .direction_output = lpc32xx_gpio_dir_output_p3,
+ .set = lpc32xx_gpio_set_value_p3,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P3_GRP,
+ .ngpio = LPC32XX_GPIO_P3_MAX,
+ .names = gpio_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpi_p3",
+ .direction_input = lpc32xx_gpio_dir_in_always,
+ .get = lpc32xx_gpi_get_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPI_P3_GRP,
+ .ngpio = LPC32XX_GPI_P3_MAX,
+ .names = gpi_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpo_p3",
+ .direction_output = lpc32xx_gpio_dir_out_always,
+ .set = lpc32xx_gpo_set_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPO_P3_GRP,
+ .ngpio = LPC32XX_GPO_P3_MAX,
+ .names = gpo_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+ gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c732d7..740caed2b27 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854e221..9c27244fd68 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <asm/mach/irq.h>
struct gpio_bank {
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
new file mode 100644
index 00000000000..9052925c6fa
--- /dev/null
+++ b/drivers/gpio/gpio-pxa.c
@@ -0,0 +1,338 @@
+/*
+ * linux/arch/arm/plat-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+
+#include <mach/gpio-pxa.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+ char label[10];
+
+ unsigned long irq_mask;
+ unsigned long irq_edge_rise;
+ unsigned long irq_edge_fall;
+
+#ifdef CONFIG_PM
+ unsigned long saved_gplr;
+ unsigned long saved_gpdr;
+ unsigned long saved_grer;
+ unsigned long saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+ return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
+{
+ return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t value, mask = 1 << offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ value = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
+ __raw_writel(value, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t tmp, mask = 1 << offset;
+ unsigned long flags;
+
+ __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ tmp = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ __raw_writel(tmp, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ __raw_writel(1 << offset, gpio_chip_base(chip) +
+ (value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
+
+ chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+ struct gpio_chip *c = &chips[i].chip;
+
+ sprintf(chips[i].label, "gpio-%d", i);
+ chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+ c->base = gpio;
+ c->label = chips[i].label;
+
+ c->direction_input = pxa_gpio_direction_input;
+ c->direction_output = pxa_gpio_direction_output;
+ c->get = pxa_gpio_get;
+ c->set = pxa_gpio_set;
+
+ /* number of GPIOs on last bank may be less than 32 */
+ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+ gpiochip_add(c);
+ }
+ pxa_gpio_chips = chips;
+ return 0;
+}
+
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct pxa_gpio_chip *c;
+ int gpio = irq_to_gpio(d->irq);
+ unsigned long gpdr, mask = GPIO_bit(gpio);
+
+ c = gpio_to_pxachip(gpio);
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* Don't mess with enabled GPIOs using preconfigured edges or
+ * GPIOs set to alternate function or to output during probe
+ */
+ if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+ return 0;
+
+ if (__gpio_is_occupied(gpio))
+ return 0;
+
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+ if (__gpio_is_inverted(gpio))
+ __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ else
+ __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ c->irq_edge_rise |= mask;
+ else
+ c->irq_edge_rise &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ c->irq_edge_fall |= mask;
+ else
+ c->irq_edge_fall &= ~mask;
+
+ update_edge_detect(c);
+
+ pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
+ ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
+ ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+ return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct pxa_gpio_chip *c;
+ int loop, gpio, gpio_base, n;
+ unsigned long gedr;
+
+ do {
+ loop = 0;
+ for_each_gpio_chip(gpio, c) {
+ gpio_base = c->chip.base;
+
+ gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = gedr & c->irq_mask;
+ __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+ n = find_first_bit(&gedr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ loop = 1;
+
+ generic_handle_irq(gpio_to_irq(gpio_base + n));
+ n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+ }
+ }
+ } while (loop);
+}
+
+static void pxa_ack_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+ __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+ uint32_t grer, gfer;
+
+ c->irq_mask &= ~GPIO_bit(gpio);
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+ c->irq_mask |= GPIO_bit(gpio);
+ update_edge_detect(c);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+ .name = "GPIO",
+ .irq_ack = pxa_ack_muxed_gpio,
+ .irq_mask = pxa_mask_muxed_gpio,
+ .irq_unmask = pxa_unmask_muxed_gpio,
+ .irq_set_type = pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+ struct pxa_gpio_chip *c;
+ int gpio, irq;
+
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ pxa_init_gpio_chip(end);
+
+ /* clear all GPIO edge detects */
+ for_each_gpio_chip(gpio, c) {
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ }
+
+ for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Install handler for GPIO>=2 edge detect interrupts */
+ irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
+ pxa_muxed_gpio_chip.irq_set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(void)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+ c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+ /* Clear GPIO transition detect bits */
+ __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ }
+ return 0;
+}
+
+static void pxa_gpio_resume(void)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ /* restore level with set/clear */
+ __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+ __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+ __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+ __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ }
+}
+#else
+#define pxa_gpio_suspend NULL
+#define pxa_gpio_resume NULL
+#endif
+
+struct syscore_ops pxa_gpio_syscore_ops = {
+ .suspend = pxa_gpio_suspend,
+ .resume = pxa_gpio_resume,
+};
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
new file mode 100644
index 00000000000..b6c1f6d8064
--- /dev/null
+++ b/drivers/gpio/gpio-sa1100.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <mach/hardware.h>
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return GPLR & GPIO_GPIO(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ GPSR = GPIO_GPIO(offset);
+ else
+ GPCR = GPIO_GPIO(offset);
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ GPDR &= ~GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ sa1100_gpio_set(chip, offset, value);
+ GPDR |= GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip sa1100_gpio_chip = {
+ .label = "gpio",
+ .direction_input = sa1100_direction_input,
+ .direction_output = sa1100_direction_output,
+ .set = sa1100_gpio_set,
+ .get = sa1100_gpio_get,
+ .base = 0,
+ .ngpio = GPIO_MAX + 1,
+};
+
+void __init sa1100_init_gpio(void)
+{
+ gpiochip_add(&sa1100_gpio_chip);
+}
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 75cf91138b6..61044c889f7 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -28,6 +28,7 @@
#include <asm/mach/irq.h>
+#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
@@ -136,7 +137,10 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
return 0;
}
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return TEGRA_GPIO_TO_IRQ(offset);
+}
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
@@ -144,6 +148,7 @@ static struct gpio_chip tegra_gpio_chip = {
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .to_irq = tegra_gpio_to_irq,
.base = 0,
.ngpio = TEGRA_NR_GPIOS,
};
@@ -334,6 +339,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
struct resource *res;
struct tegra_gpio_bank *bank;
+ int gpio;
int i;
int j;
@@ -381,14 +387,17 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
gpiochip_add(&tegra_gpio_chip);
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+ for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+ int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ /* No validity check; all Tegra GPIOs are valid IRQs */
+
+ bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
+ irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
new file mode 100644
index 00000000000..3fa3e2867e1
--- /dev/null
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -0,0 +1,205 @@
+/*
+ * Texas Instruments TNETV107X GPIO Controller
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/tnetv107x.h>
+
+struct tnetv107x_gpio_regs {
+ u32 idver;
+ u32 data_in[3];
+ u32 data_out[3];
+ u32 direction[3];
+ u32 enable[3];
+};
+
+#define gpio_reg_index(gpio) ((gpio) >> 5)
+#define gpio_reg_bit(gpio) BIT((gpio) & 0x1f)
+
+#define gpio_reg_rmw(reg, mask, val) \
+ __raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
+
+#define gpio_reg_set_bit(reg, gpio) \
+ gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
+
+#define gpio_reg_clear_bit(reg, gpio) \
+ gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
+
+#define gpio_reg_get_bit(reg, gpio) \
+ (__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
+
+#define chip2controller(chip) \
+ container_of(chip, struct davinci_gpio_controller, chip)
+
+#define TNETV107X_GPIO_CTLRS DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
+
+static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
+
+static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+
+ gpio_reg_set_bit(regs->enable, gpio);
+
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+
+ return 0;
+}
+
+static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+
+ gpio_reg_clear_bit(regs->enable, gpio);
+
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+
+ gpio_reg_set_bit(regs->direction, gpio);
+
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+
+ return 0;
+}
+
+static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+
+ if (value)
+ gpio_reg_set_bit(regs->data_out, gpio);
+ else
+ gpio_reg_clear_bit(regs->data_out, gpio);
+
+ gpio_reg_clear_bit(regs->direction, gpio);
+
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+
+ return 0;
+}
+
+static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ int ret;
+
+ ret = gpio_reg_get_bit(regs->data_in, gpio);
+
+ return ret ? 1 : 0;
+}
+
+static void tnetv107x_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct davinci_gpio_controller *ctlr = chip2controller(chip);
+ struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+ unsigned gpio = chip->base + offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctlr->lock, flags);
+
+ if (value)
+ gpio_reg_set_bit(regs->data_out, gpio);
+ else
+ gpio_reg_clear_bit(regs->data_out, gpio);
+
+ spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int __init tnetv107x_gpio_setup(void)
+{
+ int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct tnetv107x_gpio_regs *regs;
+ struct davinci_gpio_controller *ctlr;
+
+ if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
+ return 0;
+
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(TNETV107X_N_GPIO < ngpio))
+ ngpio = TNETV107X_N_GPIO;
+
+ regs = ioremap(soc_info->gpio_base, SZ_4K);
+ if (WARN_ON(!regs))
+ return -EINVAL;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+ ctlr = &chips[i];
+
+ ctlr->chip.label = "tnetv107x";
+ ctlr->chip.can_sleep = 0;
+ ctlr->chip.base = base;
+ ctlr->chip.ngpio = ngpio - base;
+ if (ctlr->chip.ngpio > 32)
+ ctlr->chip.ngpio = 32;
+
+ ctlr->chip.request = tnetv107x_gpio_request;
+ ctlr->chip.free = tnetv107x_gpio_free;
+ ctlr->chip.direction_input = tnetv107x_gpio_dir_in;
+ ctlr->chip.get = tnetv107x_gpio_get;
+ ctlr->chip.direction_output = tnetv107x_gpio_dir_out;
+ ctlr->chip.set = tnetv107x_gpio_set;
+
+ spin_lock_init(&ctlr->lock);
+
+ ctlr->regs = regs;
+ ctlr->set_data = &regs->data_out[i];
+ ctlr->clr_data = &regs->data_out[i];
+ ctlr->in_data = &regs->data_in[i];
+
+ gpiochip_add(&ctlr->chip);
+ }
+
+ soc_info->gpio_ctlrs = chips;
+ soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+ return 0;
+}
+pure_initcall(tnetv107x_gpio_setup);
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255cb0b..4035778852b 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This can driver either of the two basic GPIO cores
* available in the U300 platforms:
* COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -21,677 +20,898 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ * is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ * impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ * low, this is the most typical case and is typically achieved with two
+ * active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ * (open collector) which means it is usually wired with other output
+ * ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ * (open emitter) which is the same as open drain mutatis mutandis but
+ * pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR (0x00)
+#define U300_335_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR (0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV (0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN (0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR (0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR (0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER (0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR (0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE (0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR (0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR (0x04)
+#define U300_571_PXPDOR (0x08)
+#define U300_571_PXPCR (0x0C)
+#define U300_571_PXPER (0x10)
+#define U300_571_PXIEV (0x14)
+#define U300_571_PXIEN (0x18)
+#define U300_571_PXIFR (0x1C)
+#define U300_571_PXICR (0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+ struct gpio_chip chip;
+ struct list_head port_list;
+ struct clk *clk;
+ struct resource *memres;
+ void __iomem *base;
+ struct device *dev;
+ int irq_base;
+ u32 stride;
+ /* Register offsets */
+ u32 pcr;
+ u32 dor;
+ u32 dir;
+ u32 per;
+ u32 icr;
+ u32 ien;
+ u32 iev;
+};
struct u300_gpio_port {
- const char *name;
+ struct list_head node;
+ struct u300_gpio *gpio;
+ char name[8];
int irq;
int number;
+ u8 toggle_edge_mode;
};
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+ (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+ (1 << (pin & 0x07))
+struct u300_gpio_confdata {
+ u16 bias_mode;
+ bool output;
+ int outval;
};
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+ .output = false, \
+}
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
+#define U300_PULL_UP_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+ .output = false, \
+}
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
+#define U300_OUTPUT_LOW { \
+ .output = true, \
+ .outval = 0, \
+}
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
+#define U300_OUTPUT_HIGH { \
+ .output = true, \
+ .outval = 1, \
+}
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 5, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 6, pind 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
}
-#endif
+};
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
/* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
}
-#endif
};
-#endif
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
*/
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
+ return container_of(chip, struct u300_gpio, chip);
}
-EXPORT_SYMBOL(gpio_register_callback);
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
- return 0;
+ return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
}
-EXPORT_SYMBOL(gpio_unregister_callback);
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
- else
- gpio_pin[gpio].users++;
+ local_irq_save(flags);
- gpio_users++;
+ val = readl(U300_PIN_REG(offset, dor));
+ if (value)
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
+ else
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
- return 0;
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /* Mask out this pin, note 2 bits per setting */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_get_value);
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
- u32 val;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 oldmode;
+ u32 val;
local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /*
+ * Drive mode must be set by the special mode set function, set
+ * push/pull mode by default if no mode has been selected.
+ */
+ oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ /* mode = 0 means input, else some mode is already set */
+ if (oldmode == 0) {
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
}
+ u300_gpio_set(chip, offset, value);
local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ int retirq = gpio->irq_base + offset;
+
+ dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+ retirq);
+ return retirq;
+}
+
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+ u16 param, unsigned long *data)
+{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ switch (param) {
+ case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+ case GPIO_U300_CONFIG_BIAS_FLOAT:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_BIAS_PULL_UP:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ default:
+ local_irq_restore(flags);
+ dev_err(gpio->dev, "illegal configuration requested\n");
+ return -EINVAL;
+ }
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+static struct gpio_chip u300_gpio_chip = {
+ .label = "u300-gpio-chip",
+ .owner = THIS_MODULE,
+ .get = u300_gpio_get,
+ .set = u300_gpio_set,
+ .direction_input = u300_gpio_direction_input,
+ .direction_output = u300_gpio_direction_output,
+ .to_irq = u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
{
- unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
- */
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
- local_irq_restore(flags);
- return 0;
+ val = readl(U300_PIN_REG(offset, icr));
+ /* Set mode depending on state */
+ if (u300_gpio_get(&gpio->chip, offset)) {
+ /* High now, let's trigger on falling edge next then */
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+ offset);
+ } else {
+ /* Low now, let's trigger on rising edge next then */
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+ offset);
+ }
}
-EXPORT_SYMBOL(gpio_direction_output);
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
- unsigned long flags;
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ if ((trigger & IRQF_TRIGGER_RISING) &&
+ (trigger & IRQF_TRIGGER_FALLING)) {
+ /*
+ * The GPIO block can only trigger on falling OR rising edges,
+ * not both. So we need to toggle the mode whenever the pin
+ * goes from one state to the other with a special state flag
+ */
+ dev_dbg(gpio->dev,
+ "trigger on both rising and falling edge on pin %d\n",
+ offset);
+ port->toggle_edge_mode |= U300_PIN_BIT(offset);
+ u300_toggle_trigger(gpio, offset);
+ } else if (trigger & IRQF_TRIGGER_RISING) {
+ dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ } else if (trigger & IRQF_TRIGGER_FALLING) {
+ dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ }
+
+ return 0;
}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-void disable_irq_on_gpio_pin(unsigned gpio)
+static void u300_gpio_irq_enable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
+static void u300_gpio_irq_disable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_pullup);
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+static struct irq_chip u300_gpio_irqchip = {
+ .name = "u300-gpio-irqchip",
+ .irq_enable = u300_gpio_irq_enable,
+ .irq_disable = u300_gpio_irq_disable,
+ .irq_set_type = u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
+ struct u300_gpio_port *port = irq_get_handler_data(irq);
+ struct u300_gpio *gpio = port->gpio;
+ int pinoffset = port->number << 3; /* get the right stride */
+ unsigned long val;
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
/* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(pinoffset, iev));
/* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+ val &= 0xFFU; /* 8 bits per port */
/* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
+ writel(val, U300_PIN_REG(pinoffset, iev));
+
+ /* Call IRQ handler */
+ if (val != 0) {
+ int irqoffset;
+
+ for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+ int pin_irq = gpio->irq_base + (port->number << 3)
+ + irqoffset;
+ int offset = pinoffset + irqoffset;
+
+ dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+ pin_irq, offset);
+ generic_handle_irq(pin_irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs mockery
+ */
+ if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+ u300_toggle_trigger(gpio, offset);
+ }
}
- return IRQ_HANDLED;
+
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static void gpio_set_initial_values(void)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+ int offset,
+ const struct u300_gpio_confdata *conf)
{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
+ /* Set mode: input or output */
+ if (conf->output) {
+ u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ /* Deactivate bias mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_BIAS_FLOAT,
+ NULL);
+
+ /* Set drive mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+ offset, conf->outval);
+ } else {
+ u300_gpio_direction_input(&gpio->chip, offset);
+
+ /* Always set output low on input pins */
+ u300_gpio_set(&gpio->chip, offset, 0);
+
+ /* Set bias mode for input */
+ u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+ offset, conf->bias_mode);
}
+}
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+ struct u300_gpio_platform *plat)
+{
+ int i, j;
+
+ /* Write default config and values to all pins */
+ for (i = 0; i < plat->ports; i++) {
+ for (j = 0; j < 8; j++) {
+ const struct u300_gpio_confdata *conf;
+ int offset = (i*8) + j;
+
+ if (plat->variant == U300_GPIO_COH901571_3_BS335)
+ conf = &bs335_gpio_config[i][j];
+ else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+ conf = &bs365_gpio_config[i][j];
+ else
+ break;
+
+ u300_gpio_init_pin(gpio, offset, conf);
}
}
+}
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+ struct u300_gpio_port *port;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &gpio->port_list) {
+ port = list_entry(p, struct u300_gpio_port, node);
+ list_del(&port->node);
+ free_irq(port->irq, port);
+ kfree(port);
}
-#endif
}
-static int __init gpio_probe(struct platform_device *pdev)
+static int __init u300_gpio_probe(struct platform_device *pdev)
{
- u32 val;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio;
int err = 0;
+ int portno;
+ u32 val;
+ u32 ifr;
int i;
- int num_irqs;
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
+ gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+ if (gpio == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ gpio->chip = u300_gpio_chip;
+ gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+ gpio->irq_base = plat->gpio_irq_base;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.base = plat->gpio_base;
+ gpio->dev = &pdev->dev;
/* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
+ gpio->clk = clk_get(gpio->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ err = PTR_ERR(gpio->clk);
+ dev_err(gpio->dev, "could not get GPIO clock\n");
goto err_no_clk;
}
- err = clk_enable(clk);
+ err = clk_enable(gpio->clk);
if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
+ dev_err(gpio->dev, "could not enable GPIO clock\n");
goto err_no_clk_enable;
}
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
+ gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!gpio->memres) {
+ dev_err(gpio->dev, "could not get GPIO memory resource\n");
+ err = -ENODEV;
goto err_no_resource;
+ }
- if (!request_mem_region(memres->start, resource_size(memres),
+ if (!request_mem_region(gpio->memres->start,
+ resource_size(gpio->memres),
"GPIO Controller")) {
err = -ENODEV;
goto err_no_ioregion;
}
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
+ gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+ if (!gpio->base) {
err = -ENOMEM;
goto err_no_ioremap;
}
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
+
+ if (plat->variant == U300_GPIO_COH901335) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 335\n");
+ gpio->stride = U300_335_PORT_STRIDE;
+ gpio->pcr = U300_335_PXPCR;
+ gpio->dor = U300_335_PXPDOR;
+ gpio->dir = U300_335_PXPDIR;
+ gpio->per = U300_335_PXPER;
+ gpio->icr = U300_335_PXICR;
+ gpio->ien = U300_335_PXIEN;
+ gpio->iev = U300_335_PXIEV;
+ ifr = U300_335_PXIFR;
+
+ /* Turn on the GPIO block */
+ writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+ gpio->base + U300_335_CR);
+ } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_571_PORT_STRIDE;
+ gpio->pcr = U300_571_PXPCR;
+ gpio->dor = U300_571_PXPDOR;
+ gpio->dir = U300_571_PXPDIR;
+ gpio->per = U300_571_PXPER;
+ gpio->icr = U300_571_PXICR;
+ gpio->ien = U300_571_PXIEN;
+ gpio->iev = U300_571_PXIEV;
+ ifr = U300_571_PXIFR;
+
+ val = readl(gpio->base + U300_571_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_571_CR);
+ u300_gpio_init_coh901571(gpio, plat);
+ } else {
+ dev_err(gpio->dev, "unknown block variant\n");
+ err = -ENODEV;
+ goto err_unknown_variant;
+ }
+
+ /* Add each port with its IRQ separately */
+ INIT_LIST_HEAD(&gpio->port_list);
+ for (portno = 0 ; portno < plat->ports; portno++) {
+ struct u300_gpio_port *port =
+ kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+ if (!port) {
+ dev_err(gpio->dev, "out of memory\n");
+ err = -ENOMEM;
+ goto err_no_port;
}
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
+
+ snprintf(port->name, 8, "gpio%d", portno);
+ port->number = portno;
+ port->gpio = gpio;
+
+ port->irq = platform_get_irq_byname(pdev,
+ port->name);
+
+ dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+ port->name);
+
+ irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* For each GPIO pin set the unique IRQ handler */
+ for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+ int irqno = gpio->irq_base + (portno << 3) + i;
+
+ dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+ irqno, port->name);
+ irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ irq_set_chip_data(irqno, port);
+ }
+
+ /* Turns off irq force (test register) for this port */
+ writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+ list_add_tail(&port->node, &gpio->port_list);
}
+ dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+ err = gpiochip_add(&gpio->chip);
+ if (err) {
+ dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+ goto err_no_chip;
+ }
+
+ platform_set_drvdata(pdev, gpio);
return 0;
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+ u300_gpio_free_ports(gpio);
+err_unknown_variant:
+ iounmap(gpio->base);
+err_no_ioremap:
+ release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+ clk_disable(gpio->clk);
+err_no_clk_enable:
+ clk_put(gpio->clk);
+err_no_clk:
+ kfree(gpio);
+ dev_info(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- int i;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio = platform_get_drvdata(pdev);
+ int err;
/* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, resource_size(memres));
- clk_disable(clk);
- clk_put(clk);
+ if (plat->variant == U300_GPIO_COH901335)
+ writel(0x00000000U, gpio->base + U300_335_CR);
+ if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365)
+ writel(0x00000000U, gpio->base + U300_571_CR);
+
+ err = gpiochip_remove(&gpio->chip);
+ if (err < 0) {
+ dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+ return err;
+ }
+ u300_gpio_free_ports(gpio);
+ iounmap(gpio->base);
+ release_mem_region(gpio->memres->start,
+ resource_size(gpio->memres));
+ clk_disable(gpio->clk);
+ clk_put(gpio->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(gpio);
return 0;
}
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
.driver = {
.name = "u300-gpio",
},
- .remove = __exit_p(gpio_remove),
+ .remove = __exit_p(u300_gpio_remove),
};
static int __init u300_gpio_init(void)
{
- return platform_driver_probe(&gpio_driver, gpio_probe);
+ return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
}
static void __exit u300_gpio_exit(void)
{
- platform_driver_unregister(&gpio_driver);
+ platform_driver_unregister(&u300_gpio_driver);
}
arch_initcall(u300_gpio_init);
module_exit(u300_gpio_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
MODULE_LICENSE("GPL");