aboutsummaryrefslogtreecommitdiff
path: root/Documentation/dvb
diff options
context:
space:
mode:
authorJohannes Stezenbach <js@linuxtv.org>2005-05-16 21:54:45 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-05-17 07:59:34 -0700
commitdf481ae59074756f1d0b2712d8b3fe8d04eb16c1 (patch)
treead29052455aaf19cead8c24117f5640bf925cb64 /Documentation/dvb
parent4a2cc1269b6c1404e6e882cee604d55c90927467 (diff)
[PATCH] dvb: bt8xx: updated documentation
updated documentation (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'Documentation/dvb')
-rw-r--r--Documentation/dvb/bt8xx.txt42
1 files changed, 16 insertions, 26 deletions
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index d84df8072d7..d64430bf4bb 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -35,45 +35,35 @@ TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
-3b) TwinHan
------------
+
+3b) TwinHan and Clones
+--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
-The value 0x71 will override the PCI type detection for dvb-bt8xx, which
-is necessary for TwinHan cards.#
+The value 0x71 will override the PCI type detection for dvb-bt8xx,
+which is necessary for TwinHan cards.
-If you're having an older card (blue color circuit) and card=0x71 locks your
-machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks
+your machine, try using 0x68, too. If that does not work, ask on the
+mailing list.
-The DST module takes a couple of useful parameters, in case the
-dst drivers fails to detect your type of card correctly.
+The DST module takes a couple of useful parameters.
-dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
+verbose takes values 0 to 5. These values control the verbosity level.
-dst_type_flags takes bit combined values:
-1 = new tuner type packets. You can use this if your card is detected
- and you have debug and you continually see the tuner packets not
- working (make sure not a basic problem like dish alignment etc.)
+debug takes values 0 and 1. You can either disable or enable debugging.
-2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
- breaking up in one half continually, and crc fails a lot, then
- this is worth a try (or trying to turn off)
+dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
+0x20 means it has a Conditional Access slot.
-4 = has symdiv. Some cards, mostly without new tuner packets, require
- a symbol division algorithm. Doesn't apply to terrestial TV.
-
-You can also specify a value to have the autodetected values turned off
-(e.g. 0). The autodected values are determined bythe cards 'response
+The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
-dst_check_ci: recognize DST-MOT
-
-or
+dst_get_device_id: Recognise [DSTMCI]
-dst_check_ci: unable to recognize DSTXCI or STXCI
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham