aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFrank Li <Frank.Li@freescale.com>2011-07-20 18:41:50 +0800
committerEric Miao <eric.miao@linaro.org>2012-01-11 21:39:40 +0800
commit072a583f8857d6bf194885c54836f10d28d8469e (patch)
tree2686f8e8ac26b386085007408bb91dff7fc60d22
parent102d6eece5d76c906e95e850b2f6bad3fef5c3bc (diff)
downloadlinux-linaro-072a583f8857d6bf194885c54836f10d28d8469e.tar.gz
input: add support for egalax touch screen controller
Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org>
-rw-r--r--drivers/input/touchscreen/Kconfig10
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/egalax_ts.c357
3 files changed, 368 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 0a3433db0c8..12314e2c023 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -177,6 +177,16 @@ config TOUCHSCREEN_EETI
To compile this driver as a module, choose M here: the
module will be called eeti_ts.
+config TOUCHSCREEN_EGALAX
+ tristate "EETI eGalax multi-touchscreen panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected EETI
+ eGalax multiple touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called egalax_ts.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index dbc9563dadb..71e19bfebfe 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
new file mode 100644
index 00000000000..58273b9e356
--- /dev/null
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -0,0 +1,357 @@
+/*
+ * Driver for EETI eGalax Multiple Touch Controller
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * based on max11801_ts.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* EETI eGalax serial touch screen controller is a I2C based multiple
+ * touch screen controller, it can supports 5 pointer multiple
+ * touch. */
+
+/* TODO:
+ - auto idle mode support
+ - early suspend support for android
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+#define REPORT_MODE_SINGLE 0x1
+#define REPORT_MODE_VENDOR 0x3
+#define REPORT_MODE_MTTOUCH 0x4
+
+#define MAX_SUPPORT_POINTS 5
+
+#define EVENT_MODE 0
+#define EVENT_STATUS 1
+#define EVENT_VALID_OFFSET 7
+#define EVENT_VAILD_MASK (0x1 << EVENT_VALID_OFFSET)
+#define EVENT_ID_OFFSET 2
+#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET)
+#define EVENT_IN_RANGE (0x1 << 1)
+#define EVENT_DOWN_UP (0X1 << 0)
+
+#define MAX_I2C_DATA_LEN 10
+
+struct egalax_pointer {
+ bool valid;
+ bool status;
+ u16 x;
+ u16 y;
+};
+
+struct egalax_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct egalax_pointer events[MAX_SUPPORT_POINTS];
+};
+
+static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
+{
+ struct egalax_ts *data = dev_id;
+ struct input_dev *input_dev = data->input_dev;
+ struct i2c_client *client = data->client;
+ struct egalax_pointer *events = data->events;
+ u8 buf[MAX_I2C_DATA_LEN];
+ int i, id, ret, x, y;
+ bool down, valid;
+ u8 state;
+
+retry:
+ ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
+ if (ret == -EAGAIN)
+ goto retry;
+
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ dev_dbg(&client->dev, "recv ret:%d", ret);
+ for (i = 0; i < MAX_I2C_DATA_LEN; i++)
+ printk(KERN_DEBUG " %x ", buf[i]);
+
+ if (buf[0] != REPORT_MODE_VENDOR
+ && buf[0] != REPORT_MODE_SINGLE
+ && buf[0] != REPORT_MODE_MTTOUCH) {
+ /* invalid point */
+ return IRQ_HANDLED;
+ }
+
+ if (buf[0] == REPORT_MODE_VENDOR) {
+ dev_dbg(&client->dev, "vendor message, ignored\n");
+ return IRQ_HANDLED;
+ }
+
+ state = buf[1];
+ x = (buf[3] << 8) | buf[2];
+ y = (buf[5] << 8) | buf[4];
+
+ /* Currently, the panel Freescale using on SMD board _NOT_
+ * support single pointer mode. All event are going to
+ * multiple pointer mode. Add single pointer mode according
+ * to EETI eGalax I2C programming manual.
+ */
+ if (buf[0] == REPORT_MODE_SINGLE) {
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_key(input_dev, BTN_TOUCH, !!state);
+ input_sync(input_dev);
+ return IRQ_HANDLED;
+ }
+
+ /* deal with multiple touch */
+ valid = state & EVENT_VAILD_MASK;
+ id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
+ down = state & EVENT_DOWN_UP;
+
+ if (!valid || id > MAX_SUPPORT_POINTS) {
+ dev_dbg(&client->dev, "point invalid\n");
+ return IRQ_HANDLED;
+ }
+
+ if (down) {
+ /* should also report old pointers */
+ events[id].valid = valid;
+ events[id].status = down;
+ events[id].x = x;
+ events[id].y = y;
+
+#ifdef FORCE_SINGLE_POINTER_SUPPORT
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_event(data->input_dev, EV_KEY, BTN_TOUCH, 1);
+ input_report_abs(input_dev, ABS_PRESSURE, 1);
+#else
+ for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
+ if (!events[i].valid)
+ continue;
+ dev_dbg(&client->dev, "report id:%d valid:%d x:%d y:%d",
+ i, valid, x, y);
+
+ input_report_abs(input_dev,
+ ABS_MT_TRACKING_ID, i);
+ input_report_abs(input_dev,
+ ABS_MT_TOUCH_MAJOR, 1);
+ input_report_abs(input_dev,
+ ABS_MT_POSITION_X, events[i].x);
+ input_report_abs(input_dev,
+ ABS_MT_POSITION_Y, events[i].y);
+ input_mt_sync(input_dev);
+ }
+#endif
+ } else {
+ dev_dbg(&client->dev, "release id:%d\n", id);
+ events[id].valid = 0;
+ events[id].status = 0;
+#ifdef FORCE_SINGLE_POINTER_SUPPORT
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+#else
+ input_report_abs(input_dev, ABS_MT_TRACKING_ID, id);
+ input_event(input_dev, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
+ input_mt_sync(input_dev);
+#endif
+ }
+
+ input_sync(input_dev);
+ return IRQ_HANDLED;
+}
+
+static int egalax_wake_up_device(struct i2c_client *client)
+{
+ int gpio = irq_to_gpio(client->irq);
+ int ret;
+
+ ret = gpio_request(gpio, "egalax_irq");
+ if (ret < 0) {
+ dev_err(&client->dev, "request gpio failed:%d\n", ret);
+ return ret;
+ }
+ /* wake up controller via an falling edge on IRQ. */
+ gpio_direction_output(gpio, 0);
+ gpio_set_value(gpio, 1);
+ /* controller should be waken up, return irq. */
+ gpio_direction_input(gpio);
+ gpio_free(gpio);
+ return 0;
+}
+
+static int egalax_7200_firmware_version(struct i2c_client *client)
+{
+ static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
+ int ret;
+ ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int __devinit egalax_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct egalax_ts *data;
+ struct input_dev *input_dev;
+ int ret;
+
+ data = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
+ if (!data) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto err_free_data;
+ }
+
+ data->client = client;
+ data->input_dev = input_dev;
+ egalax_wake_up_device(client);
+ ret = egalax_7200_firmware_version(client);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "egalax_ts: failed to read firmware version\n");
+ ret = -EIO;
+ goto err_free_dev;
+ }
+
+ input_dev->name = "eGalax Touch Screen";
+ input_dev->phys = "I2C",
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->id.vendor = 0x0EEF;
+ input_dev->id.product = 0x0020;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &client->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
+ __set_bit(ABS_PRESSURE, input_dev->absbit);
+ input_set_abs_params(input_dev, ABS_X, 0, 32767, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 32767, 0, 0);
+
+#ifndef FORCE_SINGLE_POINTER_SUPPORT
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 32767, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 32767, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
+ MAX_SUPPORT_POINTS, 0, 0);
+#endif
+ input_set_drvdata(input_dev, data);
+
+ ret = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "egalax_ts", data);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_free_dev;
+ }
+
+ ret = input_register_device(data->input_dev);
+ if (ret < 0)
+ goto err_free_irq;
+ i2c_set_clientdata(client, data);
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, data);
+err_free_dev:
+ input_free_device(input_dev);
+err_free_data:
+ kfree(data);
+
+ return ret;
+}
+
+static __devexit int egalax_ts_remove(struct i2c_client *client)
+{
+ struct egalax_ts *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ input_unregister_device(data->input_dev);
+ input_free_device(data->input_dev);
+ kfree(data);
+
+ return 0;
+}
+
+static const struct i2c_device_id egalax_ts_id[] = {
+ {"egalax_ts", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
+
+#ifdef CONFIG_PM_SLEEP
+static int egalax_ts_suspend(struct device *dev)
+{
+ int ret;
+ u8 suspend_cmd[MAX_I2C_DATA_LEN] = {0x3, 0x6, 0xa, 0x3, 0x36,
+ 0x3f, 0x2, 0, 0, 0};
+ struct i2c_client *client = to_i2c_client(dev);
+ ret = i2c_master_send(client, suspend_cmd,
+ MAX_I2C_DATA_LEN);
+ return ret > 0 ? 0 : ret;
+}
+
+static int egalax_ts_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return egalax_wake_up_device(client);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+static struct i2c_driver egalax_ts_driver = {
+ .driver = {
+ .name = "egalax_ts",
+ .pm = &egalax_ts_pm_ops,
+ },
+ .id_table = egalax_ts_id,
+ .probe = egalax_ts_probe,
+ .remove = __devexit_p(egalax_ts_remove),
+};
+
+static int __init egalax_ts_init(void)
+{
+ return i2c_add_driver(&egalax_ts_driver);
+}
+
+static void __exit egalax_ts_exit(void)
+{
+ i2c_del_driver(&egalax_ts_driver);
+}
+
+module_init(egalax_ts_init);
+module_exit(egalax_ts_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
+MODULE_LICENSE("GPL");