diff options
| author | Andy Green <andy.green@linaro.org> | 2011-03-10 14:28:07 -0700 |
|---|---|---|
| committer | Nicolas Pitre <nicolas.pitre@linaro.org> | 2011-03-15 23:10:44 -0400 |
| commit | 47b21351fce4408a82abb6a8898ffc8b31f16bdc (patch) | |
| tree | 6fe981a284ce57ad988c469235c1c297d194454c | |
| parent | 8a41fb22ceda3c531416246f7cae457aacaff7b4 (diff) | |
panda twl6030 enable all irq sourceslinaro-linux-2.6.38-upstream-16Mar2011
This allows the overcurrent interrupt from twl6030 to be
acknowledged so the panda board does not shutdown.
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
| -rw-r--r-- | drivers/mfd/twl6030-irq.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index 4082ed73613..6692fa2adf2 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -127,6 +127,7 @@ static int twl6030_irq_thread(void *data) sts.bytes[3] = 0; /* Only 24 bits are valid*/ + pr_info("twl6030: Interrupt status 0x%06x\n", sts.int_sts); /* * Since VBUS status bit is not reliable for VBUS disconnect @@ -315,13 +316,16 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) u8 mask[4]; static struct irq_chip twl6030_irq_chip; - mask[1] = 0xFF; - mask[2] = 0xFF; - mask[3] = 0xFF; + mask[1] = 0; + mask[2] = 0; + mask[3] = 0; ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */ ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */ + mask[1] = 0xFF; + mask[2] = 0xFF; + mask[3] = 0xFF; ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */ |