aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Expand)Author
2011-05-27LINARO: imx5_defconfig: add HID supportJason Chen
2011-05-27LINARO: enable USB host and otg for mx51-evkJason Chen
2011-05-27LINARO: MX53: add pmic poweroff supportJason Chen
2011-05-27LINARO: MX51: make DDC off as default boot for mx51-evkJason Chen
2011-04-29SAUCE: MX5: increase coherent DMA size to 128M and remove arch_adjust_zone() ...Eric Miao
2011-04-26SAUCE: MX5: fix possible panic due to incorrectly calculated timeoutEric Miao
2011-04-21SAUCE: MX5: GPIO registers start differently between i.MX51/53Eric Miao
2011-04-21SAUCE: MX51: fix build error of mx51_get_cpu_op() not declaredEric Miao
2011-04-21ENGR00142436-1 MX53 LOCO: Audio not work in 2.6.38 kernelZeng Zhaoming
2011-04-21ENGR00142413: MX51: Fix mx51 I2c board info multiple defined in 2.6.38Zeng Zhaoming
2011-04-21ENGR00142304: IMX51: Add pmic support for IMX51 babbage in 2.6.38Zeng Zhaoming
2011-04-21ENGR00142303: IMX51: add sgtl5000 support for MX51 babbageZeng Zhaoming
2011-04-21ARM: imx53: set uart_main_clk parent clock to pll2_sw_clkRichard Zhao
2011-04-20ENGR00141152-2 imx5X MSL: make default display optionJason Chen
2011-04-20ENGR00142296-1 ARM: MX5: Add SRTC device supportAnish Trivedi
2011-04-19ENGR00142268 ARM i.MX51 bbg: add display support.Jason Chen
2011-04-19ENGR00142266-7 eSDHC:Add the GPIO CD/WP on MX53 EVK boardsRichard Zhu
2011-04-19ENGR00142266-6 eSDHC:Add the GPIO CD/WP on MX53 ARD boardsRichard Zhu
2011-04-19ENGR00142266-5 eSDHC:Add the GPIO CD/WP on MX53 SMD boardsRichard Zhu
2011-04-19ENGR00142266-4 eSDHC:Add the GPIO CD/WP on MX53 LOCO boardsRichard Zhu
2011-04-19ENGR00142266-3 eSDHC:Add the GPIO CD/WP on MX51 BBG boardsRichard Zhu
2011-04-19ENGR00142266-1 eSDHC:Add the GPIO CD/WP on MX5x boardsRichard Zhu
2011-04-19ENGR00142132 SPI: Fix the wrong SPI clocks definitions in 2.6.38Richard Zhu
2011-04-19arm: imx50: fix mc13892 build error.Richard Zhao
2011-04-19ENGR00137340-2 MX53_SMD: add headphone detection support.Zhang Jiejing
2011-04-19ENGR00142089-1 MX51/MX53: Upgrade SCC2 and SAHARA drivers to 2.6.38Anish Trivedi
2011-04-19ENGR00141363 ARM imx53 clock: change di0 clock default parent to pll3Jason Chen
2011-04-19ENGR00141155-1 ARM mx53_smd: add related regulator for hdmiJason Chen
2011-04-19ENGR00142020-3: MX50: Add SPI and MC13892 supportRanjani Vaidyanathan
2011-04-19ENGR00142020-2: MX50: Add SPI and MC13892 supportRanjani Vaidyanathan
2011-04-19ENGR00142124-1 arm: imx5: add fixup function to reserve memoryRichard Zhao
2011-04-19ENGR00142119-2 arm: imx5: add mxc_gpu_platform_dataRichard Zhao
2011-04-19ENGR00142005-6 ARM: mx5x: enable LDB in the default configLily Zhang
2011-04-19ENGR00142005-5 ARM: mx53 loco: add LVDS supportLily Zhang
2011-04-19ENGR00142005-4 ARM: mx53 smd: Add LDVS supportLily Zhang
2011-04-19ENGR00142005-2 ARM: imx: Add LDB deviceLily Zhang
2011-04-19ENGR00142005-1 ARM: imx: srtc: the end address minus 1Lily Zhang
2011-04-19ENGR00141987-1 PWM: upgrade to 2.6.38 kernelYuxi Sun
2011-04-19ENGR00137979-2 [MX50]add performance monitor driverTony Lin
2011-04-19ENGR00140737 - ARM: imx50: Fix APLL relocking and remove APLL auto-disableRobby Cai
2011-04-19ENGR00140390 MX53_SMD: IOMUX: Fix UART3 iomux or Atheros BT will hang.Zhang Jiejing
2011-04-19ENGR00138201 MX53_SMD: BT: add delay after BT chip resetZhang Jiejing
2011-04-19ENGR00141977 MX50: Kernel can't boot upJason Liu
2011-04-19ENGR00137669 rfkill: mx53: ath3k rfkill interface.Zhang Jiejing
2011-04-19ENGR00138130-3 MX53_ARD: add i2c and max11801 touch screenZhang Jiejing
2011-04-19ENGR00139383-4 MX5 defconfig:Support ISL29023 light sensorLiu Ying
2011-04-19ENGR00139383-3 MX53 SMD:Support ISL29023 light sensorLiu Ying
2011-04-19ENGR00141654: Mx53 SMD: Add audio support for upgrading to 2.6.38Zeng Zhaoming
2011-04-19plat-mxc: remove reference to machine_is_mx37_3dsrichard
2011-04-19ENGR00141651-1 MX53,Loco: audio not work when ipmux2 clock disabled in idleZeng Zhaoming