Age | Commit message (Collapse) | Author |
|
BugLink: http://bugs.launchpad.net/bugs/773242
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
trick
BugLink: http://bugs.launchpad.net/bugs/773043
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Ignore: yes
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
BugLink: http://bugs.launchpad.net/bugs/768373
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
|
|
If platform not provide headphone status detect gpio, should not failed
the audio subsystem.
Fix it by complains with a warning.
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Audio init failed with:
failed to call snd_soc_jack_add_gpios
soc-audio soc-audio: asoc: failed to init HiFi: -16
asoc: failed to instantiate card sgtl5000-audio: -16
This is caused by hp_status() callback gpio setting introduced by:
9dbaab8db17c3ce6bbe368a2b708c41ea1db33f8
Fix it by provide gpio setting in platform data.
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Multiple defined i2c board info in 2.6.38 kernel for mx51 bbg.
This cause a build error.
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Add pmic support for imx51 babbage in upgrading to 2.6.38
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Add sgtl5000 audio support for imx51 babbage in upgrading to 2.6.38.
Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
uboot possiblly not set it correctly.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
pending indicate the timer has been fired but clock not yet disabled.
This patch fixs the bug that sometimes in irq handle it tries to enable
clock and cause BUG.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
make default display option for tve/vga/hdmi/ddc
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Change MSL files.
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
After this patch, default display for below platforms:
mx51 bbg: DVI-XGA on DI0
mx53 ard: LVDS-XGA on DI0
mx53 evk: CLAA-WVGA on DI0
mx53 loco: VGA-XGA on DI1
mx53 smd: LVDS-XGA on DI1
The default options will work if you do not enter other video cmdline options.
For platform need enable other drivers, it will enable it automatically.
For example, under default option, mx53 loco will enable tve-vga driver
automatically; before this patch, it need add 'vga' to cmdline to enable it.
And 'di1_primary' option also will be enabled automatically if need.
If you want to overwrite the default option, please refer to below:
enable vga: 'vga'
disable vga: 'vga=off'
enable tve: 'tve'
disable tve: 'tve=off'
enable ddc: 'ddc'
disable ddc: 'ddc=off'
enable hdmi: 'hdmi'
disable hdmi: 'hdmi=off'
choose di0 as primary: 'di0_primary'
choose di1 as primary: 'di1_primary'
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
seperate interrupt handling and clk_enable for Z160 and Z430
Signed-off-by: Zhou, Jie <b30303@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
The root cause is endless GSL_INTR_BLOCK_YDX_CP interrupt.
Apply interrupt status read work around only when yamato started.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
The GPU hang when run two cubes together with one video playback.
According to the suggestion from AMD, we'd better not read register
when GPU active, especially for CP block.
Signed-off-by: Zhou, Jie <b30303@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
RTC-DEV ioctl interface changed, which required a definition
of new callback mxc_rtc_alarm_irq_enable in SRTC driver.
Also, added a sync call to mxc_rtc_interrupt after a write to
LP domain register to make sure we wait 3 clock cycles in order
for the write to complete, as required by the hardware.
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Machine layer changes to add SRTC device for MX5x platforms.
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Add display device support for mx51 bbg.
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
arm: enable the eSDHC CD/WP on MX53 EVK board
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
arm: enable the eSDHC CD/WP on MX53 ARD board
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
arm: enable the eSDHC CD/WP on MX53 SMD board
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
arm: enable the eSDHC CD/WP on MX53 LOCO board
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
arm: enable the eSDHC CD/WP on MX51 BBG board
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
sdhc: add the CD/WP on the MX5x boards
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
sdhc: add always present member into esdhc platform data struct
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Fix the wrong SPI clocks definitions after upgrade from 2.6.35
to 2.6.38
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
add headphone gpio in imx sound card platform data.
delete old method of headphone detection codec.
Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
add a asoc headphone detection, it's a generic way using by asoc area.
Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Starting with 2.6.36, ioctl file operation is removed; therefore,
changed ioctl function to unlocked_ioctl function, which has a
different function prototype and requires local locking mechanism
to prevent more than 1 user from accessing ioctls at the same time.
Modified SCC2 driver to obtain IRQs from resource array.
Modified SAHARA driver to use either MX53 or MX51 base address and
irq definitions since the generic versions are no longer defined
in the machine layer header files.
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Removed SCC2 IRQ definitions from header file since
IRQs will be obtained from resource array during probe
function.
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Machine layer changes to add SCC2 device.
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
uevent should not be sent during lock hold.
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
If enable both LVDS and one display device use external di clock, there will
be conflict between their clock parent -- both use pll4 on mx53. So it need
change di0 clock parent to pll3, and then uart parent need change to pll2 to
avoid console mess.
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
When cable mode changed, below uevent will be sent out:
EVENT=NONE
EVENT=CVBS0
EVENT=YPBPR
EVENT=SVIDEO
under /sys/devices/platform/tve.0
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
add bgr24 fmt support for di
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|
|
Add related regulator.
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
|