diff options
36 files changed, 689 insertions, 478 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ce91560229f5..5d0283cd3a81 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -170,7 +170,10 @@ and is between 256 and 4096 characters. It is defined in the file acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS Format: To spoof as Windows 98: ="Microsoft Windows" - acpi_osi= [HW,ACPI] empty param disables _OSI + acpi_osi= [HW,ACPI] Modify list of supported OS interface strings + acpi_osi="string1" # add string1 -- only one string + acpi_osi="!string2" # remove built-in string2 + acpi_osi= # disable all strings acpi_serialize [HW,ACPI] force serialization of AML methods diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 2d4803359a04..9e6b94face4b 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -138,7 +138,7 @@ Hot keys -------- procfs: /proc/acpi/ibm/hotkey -sysfs device attribute: hotkey/* +sysfs device attribute: hotkey_* Without this driver, only the Fn-F4 key (sleep button) generates an ACPI event. With the driver loaded, the hotkey feature enabled and the @@ -196,10 +196,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file: sysfs notes: - The hot keys attributes are in a hotkey/ subdirectory off the - thinkpad device. - - bios_enabled: + hotkey_bios_enabled: Returns the status of the hot keys feature when thinkpad-acpi was loaded. Upon module unload, the hot key feature status will be restored to this value. @@ -207,19 +204,19 @@ sysfs notes: 0: hot keys were disabled 1: hot keys were enabled - bios_mask: + hotkey_bios_mask: Returns the hot keys mask when thinkpad-acpi was loaded. Upon module unload, the hot keys mask will be restored to this value. - enable: + hotkey_enable: Enables/disables the hot keys feature, and reports current status of the hot keys feature. 0: disables the hot keys feature / feature disabled 1: enables the hot keys feature / feature enabled - mask: + hotkey_mask: bit mask to enable ACPI event generation for each hot key (see above). Returns the current status of the hot keys mask, and allows one to modify it. @@ -229,7 +226,7 @@ Bluetooth --------- procfs: /proc/acpi/ibm/bluetooth -sysfs device attribute: bluetooth/enable +sysfs device attribute: bluetooth_enable This feature shows the presence and current state of a ThinkPad Bluetooth device in the internal ThinkPad CDC slot. @@ -244,7 +241,7 @@ If Bluetooth is installed, the following commands can be used: Sysfs notes: If the Bluetooth CDC card is installed, it can be enabled / - disabled through the "bluetooth/enable" thinkpad-acpi device + disabled through the "bluetooth_enable" thinkpad-acpi device attribute, and its current status can also be queried. enable: @@ -252,7 +249,7 @@ Sysfs notes: 1: enables Bluetooth / Bluetooth is enabled. Note: this interface will be probably be superseeded by the - generic rfkill class. + generic rfkill class, so it is NOT to be considered stable yet. Video output control -- /proc/acpi/ibm/video -------------------------------------------- @@ -898,7 +895,7 @@ EXPERIMENTAL: WAN ----------------- procfs: /proc/acpi/ibm/wan -sysfs device attribute: wwan/enable +sysfs device attribute: wwan_enable This feature is marked EXPERIMENTAL because the implementation directly accesses hardware registers and may not work as expected. USE @@ -921,7 +918,7 @@ If the W-WAN card is installed, the following commands can be used: Sysfs notes: If the W-WAN card is installed, it can be enabled / - disabled through the "wwan/enable" thinkpad-acpi device + disabled through the "wwan_enable" thinkpad-acpi device attribute, and its current status can also be queried. enable: @@ -929,7 +926,7 @@ Sysfs notes: 1: enables WWAN card / WWAN card is enabled. Note: this interface will be probably be superseeded by the - generic rfkill class. + generic rfkill class, so it is NOT to be considered stable yet. Multiple Commands, Module Parameters ------------------------------------ diff --git a/Documentation/watchdog/pcwd-watchdog.txt b/Documentation/watchdog/pcwd-watchdog.txt index d9ee6336c1d4..4f68052395c0 100644 --- a/Documentation/watchdog/pcwd-watchdog.txt +++ b/Documentation/watchdog/pcwd-watchdog.txt @@ -1,3 +1,5 @@ +Last reviewed: 10/05/2007 + Berkshire Products PC Watchdog Card Support for ISA Cards Revision A and C Documentation and Driver by Ken Hollis <kenji@bitgate.com> @@ -14,8 +16,8 @@ The Watchdog Driver will automatically find your watchdog card, and will attach a running driver for use with that card. After the watchdog - drivers have initialized, you can then talk to the card using the PC - Watchdog program, available from http://ftp.bitgate.com/pcwd/. + drivers have initialized, you can then talk to the card using a PC + Watchdog program. I suggest putting a "watchdog -d" before the beginning of an fsck, and a "watchdog -e -t 1" immediately after the end of an fsck. (Remember @@ -62,5 +64,3 @@ -- Ken Hollis (kenji@bitgate.com) -(This documentation may be out of date. Check - http://ftp.bitgate.com/pcwd/ for the absolute latest additions.) diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt index 8d16f6f3c4ec..bb7cb1d31ec7 100644 --- a/Documentation/watchdog/watchdog-api.txt +++ b/Documentation/watchdog/watchdog-api.txt @@ -1,3 +1,6 @@ +Last reviewed: 10/05/2007 + + The Linux Watchdog driver API. Copyright 2002 Christer Weingel <wingel@nano-system.com> @@ -22,7 +25,7 @@ the system. If userspace fails (RAM error, kernel bug, whatever), the notifications cease to occur, and the hardware watchdog will reset the system (causing a reboot) after the timeout occurs. -The Linux watchdog API is a rather AD hoc construction and different +The Linux watchdog API is a rather ad-hoc construction and different drivers implement different, and sometimes incompatible, parts of it. This file is an attempt to document the existing usage and allow future driver writers to use it as a reference. @@ -46,14 +49,16 @@ some of the drivers support the configuration option "Disable watchdog shutdown on close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling the kernel, there is no way of disabling the watchdog once it has been started. So, if the watchdog daemon crashes, the system -will reboot after the timeout has passed. +will reboot after the timeout has passed. Watchdog devices also usually +support the nowayout module parameter so that this option can be controlled +at runtime. -Some other drivers will not disable the watchdog, unless a specific -magic character 'V' has been sent /dev/watchdog just before closing -the file. If the userspace daemon closes the file without sending -this special character, the driver will assume that the daemon (and -userspace in general) died, and will stop pinging the watchdog without -disabling it first. This will then cause a reboot. +Drivers will not disable the watchdog, unless a specific magic character 'V' +has been sent /dev/watchdog just before closing the file. If the userspace +daemon closes the file without sending this special character, the driver +will assume that the daemon (and userspace in general) died, and will stop +pinging the watchdog without disabling it first. This will then cause a +reboot if the watchdog is not re-opened in sufficient time. The ioctl API: @@ -227,218 +232,3 @@ The following options are available: [FIXME -- better explanations] -Implementations in the current drivers in the kernel tree: - -Here I have tried to summarize what the different drivers support and -where they do strange things compared to the other drivers. - -acquirewdt.c -- Acquire Single Board Computer - - This driver has a hardcoded timeout of 1 minute - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns KEEPALIVEPING. GETSTATUS will return 1 if - the device is open, 0 if not. [FIXME -- isn't this rather - silly? To be able to use the ioctl, the device must be open - and so GETSTATUS will always return 1]. - -advantechwdt.c -- Advantech Single Board Computer - - Timeout that defaults to 60 seconds, supports SETTIMEOUT. - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT. - The GETSTATUS call returns if the device is open or not. - [FIXME -- silliness again?] - -booke_wdt.c -- PowerPC BookE Watchdog Timer - - Timeout default varies according to frequency, supports - SETTIMEOUT - - Watchdog cannot be turned off, CONFIG_WATCHDOG_NOWAYOUT - does not make sense - - GETSUPPORT returns the watchdog_info struct, and - GETSTATUS returns the supported options. GETBOOTSTATUS - returns a 1 if the last reset was caused by the - watchdog and a 0 otherwise. This watchdog cannot be - disabled once it has been started. The wdt_period kernel - parameter selects which bit of the time base changing - from 0->1 will trigger the watchdog exception. Changing - the timeout from the ioctl calls will change the - wdt_period as defined above. Finally if you would like to - replace the default Watchdog Handler you can implement the - WatchdogHandler() function in your own code. - -eurotechwdt.c -- Eurotech CPU-1220/1410 - - The timeout can be set using the SETTIMEOUT ioctl and defaults - to 60 seconds. - - Also has a module parameter "ev", event type which controls - what should happen on a timeout, the string "int" or anything - else that causes a reboot. [FIXME -- better description] - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns CARDRESET and WDIOF_SETTIMEOUT but - GETSTATUS is not supported and GETBOOTSTATUS just returns 0. - -i810-tco.c -- Intel 810 chipset - - Also has support for a lot of other i8x0 stuff, but the - watchdog is one of the things. - - The timeout is set using the module parameter "i810_margin", - which is in steps of 0.6 seconds where 2<i810_margin<64. The - driver supports the SETTIMEOUT ioctl. - - Supports CONFIG_WATCHDOG_NOWAYOUT. - - GETSUPPORT returns WDIOF_SETTIMEOUT. The GETSTATUS call - returns some kind of timer value which ist not compatible with - the other drivers. GETBOOT status returns some kind of - hardware specific boot status. [FIXME -- describe this] - -ib700wdt.c -- IB700 Single Board Computer - - Default timeout of 30 seconds and the timeout is settable - using the SETTIMEOUT ioctl. Note that only a few timeout - values are supported. - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT. - The GETSTATUS call returns if the device is open or not. - [FIXME -- silliness again?] - -machzwd.c -- MachZ ZF-Logic - - Hardcoded timeout of 10 seconds - - Has a module parameter "action" that controls what happens - when the timeout runs out which can be 0 = RESET (default), - 1 = SMI, 2 = NMI, 3 = SCI. - - Supports CONFIG_WATCHDOG_NOWAYOUT and the magic character - 'V' close handling. - - GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call - returns if the device is open or not. [FIXME -- silliness - again?] - -mixcomwd.c -- MixCom Watchdog - - [FIXME -- I'm unable to tell what the timeout is] - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_KEEPALIVEPING, GETSTATUS returns if - the device is opened or not [FIXME -- I'm not really sure how - this works, there seems to be some magic connected to - CONFIG_WATCHDOG_NOWAYOUT] - -pcwd.c -- Berkshire PC Watchdog - - Hardcoded timeout of 1.5 seconds - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_OVERHEAT|WDIOF_CARDRESET and both - GETSTATUS and GETBOOTSTATUS return something useful. - - The SETOPTIONS call can be used to enable and disable the card - and to ask the driver to call panic if the system overheats. - -sbc60xxwdt.c -- 60xx Single Board Computer - - Hardcoded timeout of 10 seconds - - Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic - character 'V' close handling. - - No bits set in GETSUPPORT - -scx200.c -- National SCx200 CPUs - - Not in the kernel yet. - - The timeout is set using a module parameter "margin" which - defaults to 60 seconds. The timeout can also be set using - SETTIMEOUT and read using GETTIMEOUT. - - Supports a module parameter "nowayout" that is initialized - with the value of CONFIG_WATCHDOG_NOWAYOUT. Also supports the - magic character 'V' handling. - -shwdt.c -- SuperH 3/4 processors - - [FIXME -- I'm unable to tell what the timeout is] - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call - returns if the device is open or not. [FIXME -- silliness - again?] - -softdog.c -- Software watchdog - - The timeout is set with the module parameter "soft_margin" - which defaults to 60 seconds, the timeout is also settable - using the SETTIMEOUT ioctl. - - Supports CONFIG_WATCHDOG_NOWAYOUT - - WDIOF_SETTIMEOUT bit set in GETSUPPORT - -w83877f_wdt.c -- W83877F Computer - - Hardcoded timeout of 30 seconds - - Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic - character 'V' close handling. - - No bits set in GETSUPPORT - -w83627hf_wdt.c -- w83627hf watchdog - - Timeout that defaults to 60 seconds, supports SETTIMEOUT. - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT. - The GETSTATUS call returns if the device is open or not. - -wdt.c -- ICS WDT500/501 ISA and -wdt_pci.c -- ICS WDT500/501 PCI - - Default timeout of 60 seconds. The timeout is also settable - using the SETTIMEOUT ioctl. - - Supports CONFIG_WATCHDOG_NOWAYOUT - - GETSUPPORT returns with bits set depending on the actual - card. The WDT501 supports a lot of external monitoring, the - WDT500 much less. - -wdt285.c -- Footbridge watchdog - - The timeout is set with the module parameter "soft_margin" - which defaults to 60 seconds. The timeout is also settable - using the SETTIMEOUT ioctl. - - Does not support CONFIG_WATCHDOG_NOWAYOUT - - WDIOF_SETTIMEOUT bit set in GETSUPPORT - -wdt977.c -- Netwinder W83977AF chip - - Hardcoded timeout of 3 minutes - - Supports CONFIG_WATCHDOG_NOWAYOUT - - Does not support any ioctls at all. - diff --git a/Documentation/watchdog/watchdog.txt b/Documentation/watchdog/watchdog.txt deleted file mode 100644 index 4b1ff69cc19a..000000000000 --- a/Documentation/watchdog/watchdog.txt +++ /dev/null @@ -1,94 +0,0 @@ - Watchdog Timer Interfaces For The Linux Operating System - - Alan Cox <alan@lxorguk.ukuu.org.uk> - - Custom Linux Driver And Program Development - - -The following watchdog drivers are currently implemented: - - ICS WDT501-P - ICS WDT501-P (no fan tachometer) - ICS WDT500-P - Software Only - SA1100 Internal Watchdog - Berkshire Products PC Watchdog Revision A & C (by Ken Hollis) - - -All six interfaces provide /dev/watchdog, which when open must be written -to within a timeout or the machine will reboot. Each write delays the reboot -time another timeout. In the case of the software watchdog the ability to -reboot will depend on the state of the machines and interrupts. The hardware -boards physically pull the machine down off their own onboard timers and -will reboot from almost anything. - -A second temperature monitoring interface is available on the WDT501P cards -and some Berkshire cards. This provides /dev/temperature. This is the machine -internal temperature in degrees Fahrenheit. Each read returns a single byte -giving the temperature. - -The third interface logs kernel messages on additional alert events. - -Both software and hardware watchdog drivers are available in the standard -kernel. If you are using the software watchdog, you probably also want -to use "panic=60" as a boot argument as well. - -The wdt card cannot be safely probed for. Instead you need to pass -wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11". - -The SA1100 watchdog module can be configured with the "sa1100_margin" -commandline argument which specifies timeout value in seconds. - -The i810 TCO watchdog modules can be configured with the "i810_margin" -commandline argument which specifies the counter initial value. The counter -is decremented every 0.6 seconds and default to 50 (30 seconds). Values can -range between 3 and 63. - -The i810 TCO watchdog driver also implements the WDIOC_GETSTATUS and -WDIOC_GETBOOTSTATUS ioctl()s. WDIOC_GETSTATUS returns the actual counter value -and WDIOC_GETBOOTSTATUS returns the value of TCO2 Status Register (see Intel's -documentation for the 82801AA and 82801AB datasheet). - -Features --------- - WDT501P WDT500P Software Berkshire i810 TCO SA1100WD -Reboot Timer X X X X X X -External Reboot X X o o o X -I/O Port Monitor o o o X o o -Temperature X o o X o o -Fan Speed X o o o o o -Power Under X o o o o o -Power Over X o o o o o -Overheat X o o o o o - -The external event interfaces on the WDT boards are not currently supported. -Minor numbers are however allocated for it. - - -Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c - - -Contact Information - -People keep asking about the WDT watchdog timer hardware: The phone contacts -for Industrial Computer Source are: - -Industrial Computer Source -http://www.indcompsrc.com -ICS Advent, San Diego -6260 Sequence Dr. -San Diego, CA 92121-4371 -Phone (858) 677-0877 -FAX: (858) 677-0895 -> -ICS Advent Europe, UK -Oving Road -Chichester, -West Sussex, -PO19 4ET, UK -Phone: 00.44.1243.533900 - - -and please mention Linux when enquiring. - -For full information about the PCWD cards see the pcwd-watchdog.txt document. diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.txt new file mode 100644 index 000000000000..03fd756d976d --- /dev/null +++ b/Documentation/watchdog/wdt.txt @@ -0,0 +1,43 @@ +Last Reviewed: 10/05/2007 + + WDT Watchdog Timer Interfaces For The Linux Operating System + Alan Cox <alan@lxorguk.ukuu.org.uk> + + ICS WDT501-P + ICS WDT501-P (no fan tachometer) + ICS WDT500-P + +All the interfaces provide /dev/watchdog, which when open must be written +to within a timeout or the machine will reboot. Each write delays the reboot +time another timeout. In the case of the software watchdog the ability to +reboot will depend on the state of the machines and interrupts. The hardware +boards physically pull the machine down off their own onboard timers and +will reboot from almost anything. + +A second temperature monitoring interface is available on the WDT501P cards +This provides /dev/temperature. This is the machine internal temperature in +degrees Fahrenheit. Each read returns a single byte giving the temperature. + +The third interface logs kernel messages on additional alert events. + +The wdt card cannot be safely probed for. Instead you need to pass +wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11". + +Features +-------- + WDT501P WDT500P +Reboot Timer X X +External Reboot X X +I/O Port Monitor o o +Temperature X o +Fan Speed X o +Power Under X o +Power Over X o +Overheat X o + +The external event interfaces on the WDT boards are not currently supported. +Minor numbers are however allocated for it. + + +Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c + diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6238b5875fd1..fbafd965dcd2 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -142,7 +142,6 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ # Default to zImage, override when needed defaultimage-y := zImage -defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage KBUILD_IMAGE := $(defaultimage-y) all: $(KBUILD_IMAGE) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 83788986b93b..ff2701949ee1 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -11,20 +11,18 @@ # bootloader and increase compatibility with OpenFirmware. # # To this end we need to define BOOTCC, etc, as the tools -# needed to build the 32 bit image. These are normally HOSTCC, -# but may be a third compiler if, for example, you are cross -# compiling from an intel box. Once the 64bit ppc gcc is -# stable it will probably simply be a compiler switch to -# compile for 32bit mode. +# needed to build the 32 bit image. That's normally the same +# compiler for the rest of the kernel, with the -m32 flag added. # To make it easier to setup a cross compiler, # CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE # in the toplevel makefile. all: $(obj)/zImage -HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ - $(shell $(CROSS32CC) -print-file-name=include) -fPIC +BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -Os -msoft-float -pipe \ + -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ + -isystem $(shell $(CROSS32CC) -print-file-name=include) BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc ifeq ($(call cc-option-yn, -fstack-protector),y) @@ -33,8 +31,8 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -$(obj)/44x.o: BOOTCFLAGS += -Wa,-mbooke -$(obj)/ebony.o: BOOTCFLAGS += -Wa,-mbooke +$(obj)/44x.o: BOOTCFLAGS += -mcpu=440 +$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h @@ -136,6 +134,7 @@ image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += zImage.holly-elf image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 +image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") @@ -185,6 +184,9 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) +$(obj)/zImage.iseries: vmlinux + $(STRIP) -s -R .comment $< -o $@ + $(obj)/zImage.ps3: vmlinux $(STRIP) -s -R .comment $< -o $@ diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 2ed8b8b3f0ec..da77adc73078 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -129,7 +129,7 @@ case "$platform" in pmac|pseries|chrp) platformo=$object/of.o ;; -pmaccoff) +coff) platformo=$object/of.o lds=$object/zImage.coff.lds ;; @@ -220,7 +220,7 @@ case "$platform" in pseries|chrp) $object/addnote "$ofile" ;; -pmaccoff) +coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" $object/hack-coff "$ofile" ;; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 068377a2a8dc..42c8ed6ed528 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -489,7 +489,7 @@ struct irq_host *irq_alloc_host(unsigned int revmap_type, case IRQ_HOST_MAP_LINEAR: rmap = (unsigned int *)(host + 1); for (i = 0; i < revmap_arg; i++) - rmap[i] = IRQ_NONE; + rmap[i] = NO_IRQ; host->revmap_data.linear.size = revmap_arg; smp_wmb(); host->revmap_data.linear.revmap = rmap; @@ -614,7 +614,7 @@ unsigned int irq_create_mapping(struct irq_host *host, * host->ops->map() to update the flags */ virq = irq_find_mapping(host, hwirq); - if (virq != IRQ_NONE) { + if (virq != NO_IRQ) { if (host->ops->remap) host->ops->remap(host, virq, hwirq); pr_debug("irq: -> existing mapping on virq %d\n", virq); @@ -741,7 +741,7 @@ void irq_dispose_mapping(unsigned int virq) switch(host->revmap_type) { case IRQ_HOST_MAP_LINEAR: if (hwirq < host->revmap_data.linear.size) - host->revmap_data.linear.revmap[hwirq] = IRQ_NONE; + host->revmap_data.linear.revmap[hwirq] = NO_IRQ; break; case IRQ_HOST_MAP_TREE: /* Check if radix tree allocated yet */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 066a6a7a25b8..af42ddab3ab4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1171,11 +1171,12 @@ EXPORT_SYMBOL(of_find_node_by_name); /** * of_find_node_by_type - Find a node by its "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against + * @from: The node to start searching from, or NULL to start searching + * the entire device tree. The node you pass will not be + * searched, only the next one will; typically, you pass + * what the previous call returned. of_node_put() will be + * called on from for you. + * @type: The type string to match against * * Returns a node pointer with refcount incremented, use * of_node_put() on it when done. diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index f4f391cdd8f5..bf76562167c3 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -218,6 +218,7 @@ set_single_step(struct task_struct *task) regs->msr |= MSR_SE; #endif } + set_tsk_thread_flag(task, TIF_SINGLESTEP); } static inline void @@ -233,6 +234,7 @@ clear_single_step(struct task_struct *task) regs->msr &= ~MSR_SE; #endif } + clear_tsk_thread_flag(task, TIF_SINGLESTEP); } #endif /* CONFIG_PPC32 */ diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 03cd45d8fefa..3c962d5757be 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -26,6 +26,7 @@ #include <asm/machdep.h> #include <asm/reg.h> +#include <asm/smp.h> #include "pasemi.h" diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 9da82c266ba9..ec9030dbb5f1 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -25,6 +25,7 @@ #include <asm/machdep.h> #include <asm/udbg.h> #include <asm/lv1call.h> +#include <asm/smp.h> #include "platform.h" diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index b854e7f1001c..f1df942072bb 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -752,6 +752,7 @@ skip_gserver_check: void xics_request_IPIs(void) { unsigned int ipi; + int rc; ipi = irq_create_mapping(xics_host, XICS_IPI); BUG_ON(ipi == NO_IRQ); @@ -762,11 +763,12 @@ void xics_request_IPIs(void) */ set_irq_handler(ipi, handle_percpu_irq); if (firmware_has_feature(FW_FEATURE_LPAR)) - request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED, - "IPI", NULL); + rc = request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED, + "IPI", NULL); else - request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED, - "IPI", NULL); + rc = request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED, + "IPI", NULL); + BUG_ON(rc); } #endif /* CONFIG_SMP */ diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c index 3f6e55c79181..2ee176610e7c 100644 --- a/arch/ppc/syslib/ibm_ocp.c +++ b/arch/ppc/syslib/ibm_ocp.c @@ -1,4 +1,5 @@ #include <linux/module.h> +#include <asm/ibm4xx.h> #include <asm/ocp.h> struct ocp_sys_info_data ocp_sys_info = { diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index a2efae8a4c4e..0c9f15c54e8c 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -59,7 +59,7 @@ int node_to_pxm(int node) return node_to_pxm_map[node]; } -int __cpuinit acpi_map_pxm_to_node(int pxm) +int acpi_map_pxm_to_node(int pxm) { int node = pxm_to_node_map[pxm]; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index b998340e23d4..58ceb18ec997 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -33,6 +33,7 @@ #include <linux/interrupt.h> #include <linux/kmod.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/workqueue.h> #include <linux/nmi.h> #include <linux/acpi.h> @@ -73,6 +74,21 @@ static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; static struct workqueue_struct *kacpi_notify_wq; +#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ +static char osi_additional_string[OSI_STRING_LENGTH_MAX]; + +#define OSI_LINUX_ENABLED +#ifdef OSI_LINUX_ENABLED +int osi_linux = 1; /* enable _OSI(Linux) by default */ +#else +int osi_linux; /* disable _OSI(Linux) by default */ +#endif + + +#ifdef CONFIG_DMI +static struct __initdata dmi_system_id acpi_osl_dmi_table[]; +#endif + static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) { @@ -121,8 +137,9 @@ static int __init acpi_reserve_resources(void) } device_initcall(acpi_reserve_resources); -acpi_status acpi_os_initialize(void) +acpi_status __init acpi_os_initialize(void) { + dmi_check_system(acpi_osl_dmi_table); return AE_OK; } @@ -960,20 +977,38 @@ static int __init acpi_os_name_setup(char *str) __setup("acpi_os_name=", acpi_os_name_setup); +static void enable_osi_linux(int enable) { + + if (osi_linux != enable) + printk(KERN_INFO PREFIX "%sabled _OSI(Linux)\n", + enable ? "En": "Dis"); + + osi_linux = enable; + return; +} + /* - * _OSI control + * Modify the list of "OS Interfaces" reported to BIOS via _OSI + * * empty string disables _OSI - * TBD additional string adds to _OSI + * string starting with '!' disables that string + * otherwise string is added to list, augmenting built-in strings */ static int __init acpi_osi_setup(char *str) { if (str == NULL || *str == '\0') { printk(KERN_INFO PREFIX "_OSI method disabled\n"); acpi_gbl_create_osi_method = FALSE; - } else { - /* TBD */ - printk(KERN_ERR PREFIX "_OSI additional string ignored -- %s\n", - str); + } else if (*str == '!') { + if (acpi_osi_invalidate(++str) == AE_OK) + printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); + } else if (!strcmp("!Linux", str)) { + enable_osi_linux(0); + } else if (!strcmp("Linux", str)) { + enable_osi_linux(1); + } else if (*osi_additional_string == '\0') { + strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX); + printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); } return 1; @@ -1143,11 +1178,28 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) acpi_status acpi_os_validate_interface (char *interface) { - - return AE_SUPPORT; + if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX)) + return AE_OK; + if (!strcmp("Linux", interface)) { + printk(KERN_WARNING PREFIX + "System BIOS is requesting _OSI(Linux)\n"); +#ifdef OSI_LINUX_ENABLED + printk(KERN_WARNING PREFIX + "Please test with \"acpi_osi=!Linux\"\n" + "Please send dmidecode " + "to linux-acpi@vger.kernel.org\n"); +#else + printk(KERN_WARNING PREFIX + "If \"acpi_osi=Linux\" works better,\n" + "Please send dmidecode " + "to linux-acpi@vger.kernel.org\n"); +#endif + if(osi_linux) + return AE_OK; + } + return AE_SUPPORT; } - /****************************************************************************** * * FUNCTION: acpi_os_validate_address @@ -1174,5 +1226,51 @@ acpi_os_validate_address ( return AE_OK; } +#ifdef CONFIG_DMI +#ifdef OSI_LINUX_ENABLED +static int dmi_osi_not_linux(struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: requires not _OSI(Linux)\n", d->ident); + enable_osi_linux(0); + return 0; +} +#else +static int dmi_osi_linux(struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: requires _OSI(Linux)\n", d->ident); + enable_osi_linux(1); + return 0; +} +#endif + +static struct dmi_system_id acpi_osl_dmi_table[] __initdata = { +#ifdef OSI_LINUX_ENABLED + /* + * Boxes that need NOT _OSI(Linux) + */ + { + .callback = dmi_osi_not_linux, + .ident = "Toshiba Satellite P100", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_BOARD_NAME, "Satellite P100"), + }, + }, +#else + /* + * Boxes that need _OSI(Linux) + */ + { + .callback = dmi_osi_linux, + .ident = "Intel Napa CRB", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "MPAD-MSAE Customer Reference Boards"), + }, + }, +#endif + {} +}; +#endif /* CONFIG_DMI */ #endif diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c index 0e7b121a99ce..3bc0c67a9283 100644 --- a/drivers/acpi/tables/tbinstal.c +++ b/drivers/acpi/tables/tbinstal.c @@ -123,14 +123,14 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, } } - /* The table must be either an SSDT or a PSDT */ + /* The table must be either an SSDT or a PSDT or an OEMx */ if ((!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)) && - (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT))) - { + (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)) + && (strncmp(table_desc->pointer->signature, "OEM", 3))) { ACPI_ERROR((AE_INFO, - "Table has invalid signature [%4.4s], must be SSDT or PSDT", + "Table has invalid signature [%4.4s], must be SSDT, PSDT or OEMx", table_desc->pointer->signature)); return_ACPI_STATUS(AE_BAD_SIGNATURE); } diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 1ada017d01ef..194ecfe8b360 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -827,6 +827,7 @@ static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file) static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) { struct acpi_thermal *tz = seq->private; + struct acpi_device *device; int i = 0; int j = 0; @@ -849,9 +850,8 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) tz->trips.passive.tc1, tz->trips.passive.tc2, tz->trips.passive.tsp); for (j = 0; j < tz->trips.passive.devices.count; j++) { - - seq_printf(seq, "0x%p ", - tz->trips.passive.devices.handles[j]); + acpi_bus_get_device(tz->trips.passive.devices.handles[j], &device); + seq_printf(seq, "%4.4s ", acpi_device_bid(device)); } seq_puts(seq, "\n"); } @@ -862,9 +862,10 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "active[%d]: %ld C: devices=", i, KELVIN_TO_CELSIUS(tz->trips.active[i].temperature)); - for (j = 0; j < tz->trips.active[i].devices.count; j++) - seq_printf(seq, "0x%p ", - tz->trips.active[i].devices.handles[j]); + for (j = 0; j < tz->trips.active[i].devices.count; j++){ + acpi_bus_get_device(tz->trips.active[i].devices.handles[j], &device); + seq_printf(seq, "%4.4s ", acpi_device_bid(device)); + } seq_puts(seq, "\n"); } diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c index 4c1e00874dff..879eaa10d3ae 100644 --- a/drivers/acpi/utilities/utcopy.c +++ b/drivers/acpi/utilities/utcopy.c @@ -68,6 +68,10 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *user_obj, union acpi_operand_object **return_obj); static acpi_status +acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object, + union acpi_operand_object **internal_object); + +static acpi_status acpi_ut_copy_simple_object(union acpi_operand_object *source_desc, union acpi_operand_object *dest_desc); @@ -518,77 +522,73 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, return_ACPI_STATUS(AE_NO_MEMORY); } -#ifdef ACPI_FUTURE_IMPLEMENTATION -/* Code to convert packages that are parameters to control methods */ - /******************************************************************************* * * FUNCTION: acpi_ut_copy_epackage_to_ipackage * - * PARAMETERS: *internal_object - Pointer to the object we are returning - * *Buffer - Where the object is returned - * *space_used - Where the length of the object is returned + * PARAMETERS: external_object - The external object to be converted + * internal_object - Where the internal object is returned * * RETURN: Status * - * DESCRIPTION: This function is called to place a package object in a user - * buffer. A package object by definition contains other objects. - * - * The buffer is assumed to have sufficient space for the object. - * The caller must have verified the buffer length needed using the - * acpi_ut_get_object_size function before calling this function. + * DESCRIPTION: Copy an external package object to an internal package. + * Handles nested packages. * ******************************************************************************/ static acpi_status -acpi_ut_copy_epackage_to_ipackage(union acpi_operand_object *internal_object, - u8 * buffer, u32 * space_used) +acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object, + union acpi_operand_object **internal_object) { - u8 *free_space; - union acpi_object *external_object; - u32 length = 0; - u32 this_index; - u32 object_space = 0; - union acpi_operand_object *this_internal_obj; - union acpi_object *this_external_obj; + acpi_status status = AE_OK; + union acpi_operand_object *package_object; + union acpi_operand_object **package_elements; + acpi_native_uint i; ACPI_FUNCTION_TRACE(ut_copy_epackage_to_ipackage); - /* - * First package at head of the buffer - */ - external_object = (union acpi_object *)buffer; + /* Create the package object */ - /* - * Free space begins right after the first package - */ - free_space = buffer + sizeof(union acpi_object); + package_object = + acpi_ut_create_package_object(external_object->package.count); + if (!package_object) { + return_ACPI_STATUS(AE_NO_MEMORY); + } - external_object->type = ACPI_GET_OBJECT_TYPE(internal_object); - external_object->package.count = internal_object->package.count; - external_object->package.elements = (union acpi_object *)free_space; + package_elements = package_object->package.elements; /* - * Build an array of ACPI_OBJECTS in the buffer - * and move the free space past it + * Recursive implementation. Probably ok, since nested external packages + * as parameters should be very rare. */ - free_space += - external_object->package.count * sizeof(union acpi_object); + for (i = 0; i < external_object->package.count; i++) { + status = + acpi_ut_copy_eobject_to_iobject(&external_object->package. + elements[i], + &package_elements[i]); + if (ACPI_FAILURE(status)) { - /* Call walk_package */ + /* Truncate package and delete it */ -} + package_object->package.count = i; + package_elements[i] = NULL; + acpi_ut_remove_reference(package_object); + return_ACPI_STATUS(status); + } + } -#endif /* Future implementation */ + *internal_object = package_object; + return_ACPI_STATUS(status); +} /******************************************************************************* * * FUNCTION: acpi_ut_copy_eobject_to_iobject * - * PARAMETERS: *internal_object - The external object to be converted - * *buffer_ptr - Where the internal object is returned + * PARAMETERS: external_object - The external object to be converted + * internal_object - Where the internal object is returned * - * RETURN: Status - the status of the call + * RETURN: Status - the status of the call * * DESCRIPTION: Converts an external object to an internal object. * @@ -603,16 +603,10 @@ acpi_ut_copy_eobject_to_iobject(union acpi_object *external_object, ACPI_FUNCTION_TRACE(ut_copy_eobject_to_iobject); if (external_object->type == ACPI_TYPE_PACKAGE) { - /* - * Packages as external input to control methods are not supported, - */ - ACPI_ERROR((AE_INFO, - "Packages as parameters not implemented!")); - - return_ACPI_STATUS(AE_NOT_IMPLEMENTED); - } - - else { + status = + acpi_ut_copy_epackage_to_ipackage(external_object, + internal_object); + } else { /* * Build a simple object (no nested objects) */ @@ -803,33 +797,19 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, * Create and build the package object */ target_object = - acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE); + acpi_ut_create_package_object(source_object->package.count); if (!target_object) { return (AE_NO_MEMORY); } - target_object->package.count = source_object->package.count; target_object->common.flags = source_object->common.flags; - /* - * Create the object array - */ - target_object->package.elements = - ACPI_ALLOCATE_ZEROED(((acpi_size) source_object->package. - count + 1) * sizeof(void *)); - if (!target_object->package.elements) { - status = AE_NO_MEMORY; - goto error_exit; - } + /* Pass the new package object back to the package walk routine */ - /* - * Pass the new package object back to the package walk routine - */ state->pkg.this_target_obj = target_object; - /* - * Store the object pointer in the parent package object - */ + /* Store the object pointer in the parent package object */ + *this_target_ptr = target_object; break; diff --git a/drivers/acpi/utilities/uteval.c b/drivers/acpi/utilities/uteval.c index 13d5879cd98b..8ec6f8e48138 100644 --- a/drivers/acpi/utilities/uteval.c +++ b/drivers/acpi/utilities/uteval.c @@ -59,10 +59,9 @@ acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc, /* * Strings supported by the _OSI predefined (internal) method. */ -static const char *acpi_interfaces_supported[] = { +static char *acpi_interfaces_supported[] = { /* Operating System Vendor Strings */ - "Linux", "Windows 2000", "Windows 2001", "Windows 2001 SP0", @@ -158,6 +157,31 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) /******************************************************************************* * + * FUNCTION: acpi_osi_invalidate + * + * PARAMETERS: interface_string + * + * RETURN: Status + * + * DESCRIPTION: invalidate string in pre-defiend _OSI string list + * + ******************************************************************************/ + +acpi_status acpi_osi_invalidate(char *interface) +{ + int i; + + for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) { + if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i])) { + *acpi_interfaces_supported[i] = '\0'; + return AE_OK; + } + } + return AE_NOT_FOUND; +} + +/******************************************************************************* + * * FUNCTION: acpi_ut_evaluate_object * * PARAMETERS: prefix_node - Starting node diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index 4696124759e1..db0b9bac7945 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -146,6 +146,48 @@ union acpi_operand_object *acpi_ut_create_internal_object_dbg(char *module_name, /******************************************************************************* * + * FUNCTION: acpi_ut_create_package_object + * + * PARAMETERS: Count - Number of package elements + * + * RETURN: Pointer to a new Package object, null on failure + * + * DESCRIPTION: Create a fully initialized package object + * + ******************************************************************************/ + +union acpi_operand_object *acpi_ut_create_package_object(u32 count) +{ + union acpi_operand_object *package_desc; + union acpi_operand_object **package_elements; + + ACPI_FUNCTION_TRACE_U32(ut_create_package_object, count); + + /* Create a new Package object */ + + package_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE); + if (!package_desc) { + return_PTR(NULL); + } + + /* + * Create the element array. Count+1 allows the array to be null + * terminated. + */ + package_elements = ACPI_ALLOCATE_ZEROED((acpi_size) + (count + 1) * sizeof(void *)); + if (!package_elements) { + ACPI_FREE(package_desc); + return_PTR(NULL); + } + + package_desc->package.count = count; + package_desc->package.elements = package_elements; + return_PTR(package_desc); +} + +/******************************************************************************* + * * FUNCTION: acpi_ut_create_buffer_object * * PARAMETERS: buffer_size - Size of buffer to be created diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c index e9a57806cd34..2d496918b3cd 100644 --- a/drivers/acpi/utilities/utxface.c +++ b/drivers/acpi/utilities/utxface.c @@ -61,7 +61,7 @@ ACPI_MODULE_NAME("utxface") * called, so any early initialization belongs here. * ******************************************************************************/ -acpi_status acpi_initialize_subsystem(void) +acpi_status __init acpi_initialize_subsystem(void) { acpi_status status; @@ -108,8 +108,6 @@ acpi_status acpi_initialize_subsystem(void) return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_initialize_subsystem) - /******************************************************************************* * * FUNCTION: acpi_enable_subsystem diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 1cad32c62ed3..53f5538c0c05 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -115,6 +115,13 @@ config IXP4XX_WATCHDOG Say N if you are unsure. +config KS8695_WATCHDOG + tristate "KS8695 watchdog" + depends on ARCH_KS8695 + help + Watchdog timer embedded into KS8695 processor. This will reboot your + system when the timeout is reached. + config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" depends on ARCH_S3C2410 diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 8bfc00cc7c2b..d90f649038c2 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o +obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o diff --git a/drivers/char/watchdog/ks8695_wdt.c b/drivers/char/watchdog/ks8695_wdt.c new file mode 100644 index 000000000000..7150fb945eaf --- /dev/null +++ b/drivers/char/watchdog/ks8695_wdt.c @@ -0,0 +1,308 @@ +/* + * Watchdog driver for Kendin/Micrel KS8695. + * + * (C) 2007 Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/arch/regs-timer.h> + + +#define WDT_DEFAULT_TIME 5 /* seconds */ +#define WDT_MAX_TIME 171 /* seconds */ + +static int wdt_time = WDT_DEFAULT_TIME; +static int nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_time, int, 0); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +#endif + + +static unsigned long ks8695wdt_busy; + +/* ......................................................................... */ + +/* + * Disable the watchdog. + */ +static void inline ks8695_wdt_stop(void) +{ + unsigned long tmcon; + + /* disable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); +} + +/* + * Enable and reset the watchdog. + */ +static void inline ks8695_wdt_start(void) +{ + unsigned long tmcon; + unsigned long tval = wdt_time * CLOCK_TICK_RATE; + + /* disable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + + /* program timer0 */ + __raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); + + /* re-enable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static void inline ks8695_wdt_reload(void) +{ + unsigned long tmcon; + + /* disable, then re-enable timer0 */ + tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); +} + +/* + * Change the watchdog time interval. + */ +static int ks8695_wdt_settimeout(int new_time) +{ + /* + * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * + * Since WDV is a 16-bit counter, the maximum period is + * 65536 / 0.256 = 256 seconds. + */ + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; + + /* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */ + wdt_time = new_time; + return 0; +} + +/* ......................................................................... */ + +/* + * Watchdog device is opened, and watchdog starts running. + */ +static int ks8695_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &ks8695wdt_busy)) + return -EBUSY; + + ks8695_wdt_start(); + return nonseekable_open(inode, file); +} + +/* + * Close the watchdog device. + * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also + * disabled. + */ +static int ks8695_wdt_close(struct inode *inode, struct file *file) +{ + if (!nowayout) + ks8695_wdt_stop(); /* Disable the watchdog when file is closed */ + + clear_bit(0, &ks8695wdt_busy); + return 0; +} + +static struct watchdog_info ks8695_wdt_info = { + .identity = "ks8695 watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +}; + +/* + * Handle commands from user-space. + */ +static int ks8695_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch(cmd) { + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + + /* Enable new time value */ + ks8695_wdt_start(); + + /* Return current value */ + return put_user(wdt_time, p); + + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + + if (new_value & WDIOS_DISABLECARD) + ks8695_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) + ks8695_wdt_start(); + return 0; + + default: + return -ENOTTY; + } +} + +/* + * Pat the watchdog whenever device is written to. + */ +static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +{ + ks8695_wdt_reload(); /* pat the watchdog */ + return len; +} + +/* ......................................................................... */ + +static const struct file_operations ks8695wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = ks8695_wdt_ioctl, + .open = ks8695_wdt_open, + .release = ks8695_wdt_close, + .write = ks8695_wdt_write, +}; + +static struct miscdevice ks8695wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ks8695wdt_fops, +}; + +static int __init ks8695wdt_probe(struct platform_device *pdev) +{ + int res; + + if (ks8695wdt_miscdev.parent) + return -EBUSY; + ks8695wdt_miscdev.parent = &pdev->dev; + + res = misc_register(&ks8695wdt_miscdev); + if (res) + return res; + + printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + return 0; +} + +static int __exit ks8695wdt_remove(struct platform_device *pdev) +{ + int res; + + res = misc_deregister(&ks8695wdt_miscdev); + if (!res) + ks8695wdt_miscdev.parent = NULL; + + return res; +} + +static void ks8695wdt_shutdown(struct platform_device *pdev) +{ + ks8695_wdt_stop(); +} + +#ifdef CONFIG_PM + +static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message) +{ + ks8695_wdt_stop(); + return 0; +} + +static int ks8695wdt_resume(struct platform_device *pdev) +{ + if (ks8695wdt_busy) + ks8695_wdt_start(); + return 0; +} + +#else +#define ks8695wdt_suspend NULL +#define ks8695wdt_resume NULL +#endif + +static struct platform_driver ks8695wdt_driver = { + .probe = ks8695wdt_probe, + .remove = __exit_p(ks8695wdt_remove), + .shutdown = ks8695wdt_shutdown, + .suspend = ks8695wdt_suspend, + .resume = ks8695wdt_resume, + .driver = { + .name = "ks8695_wdt", + .owner = THIS_MODULE, + }, +}; + +static int __init ks8695_wdt_init(void) +{ + /* Check that the heartbeat value is within range; if not reset to the default */ + if (ks8695_wdt_settimeout(wdt_time)) { + ks8695_wdt_settimeout(WDT_DEFAULT_TIME); + pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME); + } + + return platform_driver_register(&ks8695wdt_driver); +} + +static void __exit ks8695_wdt_exit(void) +{ + platform_driver_unregister(&ks8695wdt_driver); +} + +module_init(ks8695_wdt_init); +module_exit(ks8695_wdt_exit); + +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("Watchdog driver for KS8695"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f44c94abd883..ee699a7d6214 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -114,7 +114,7 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" select APM_EMULATION - depends on ADB_PMU && PM + depends on ADB_PMU && PM && PPC32 config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 6c36a55cb3d1..95c0b96e83f2 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -740,7 +740,7 @@ static ssize_t hotkey_enable_store(struct device *dev, } static struct device_attribute dev_attr_hotkey_enable = - __ATTR(enable, S_IWUSR | S_IRUGO, + __ATTR(hotkey_enable, S_IWUSR | S_IRUGO, hotkey_enable_show, hotkey_enable_store); /* sysfs hotkey mask --------------------------------------------------- */ @@ -775,7 +775,7 @@ static ssize_t hotkey_mask_store(struct device *dev, } static struct device_attribute dev_attr_hotkey_mask = - __ATTR(mask, S_IWUSR | S_IRUGO, + __ATTR(hotkey_mask, S_IWUSR | S_IRUGO, hotkey_mask_show, hotkey_mask_store); /* sysfs hotkey bios_enabled ------------------------------------------- */ @@ -787,7 +787,7 @@ static ssize_t hotkey_bios_enabled_show(struct device *dev, } static struct device_attribute dev_attr_hotkey_bios_enabled = - __ATTR(bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL); + __ATTR(hotkey_bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL); /* sysfs hotkey bios_mask ---------------------------------------------- */ static ssize_t hotkey_bios_mask_show(struct device *dev, @@ -798,7 +798,7 @@ static ssize_t hotkey_bios_mask_show(struct device *dev, } static struct device_attribute dev_attr_hotkey_bios_mask = - __ATTR(bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL); + __ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL); /* --------------------------------------------------------------------- */ @@ -824,8 +824,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(4, - TPACPI_HOTKEY_SYSFS_GROUP); + hotkey_dev_attributes = create_attr_set(4, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_to_attr_set(hotkey_dev_attributes, @@ -1050,7 +1049,7 @@ static ssize_t bluetooth_enable_store(struct device *dev, } static struct device_attribute dev_attr_bluetooth_enable = - __ATTR(enable, S_IWUSR | S_IRUGO, + __ATTR(bluetooth_enable, S_IWUSR | S_IRUGO, bluetooth_enable_show, bluetooth_enable_store); /* --------------------------------------------------------------------- */ @@ -1061,7 +1060,6 @@ static struct attribute *bluetooth_attributes[] = { }; static const struct attribute_group bluetooth_attr_group = { - .name = TPACPI_BLUETH_SYSFS_GROUP, .attrs = bluetooth_attributes, }; @@ -1215,7 +1213,7 @@ static ssize_t wan_enable_store(struct device *dev, } static struct device_attribute dev_attr_wan_enable = - __ATTR(enable, S_IWUSR | S_IRUGO, + __ATTR(wwan_enable, S_IWUSR | S_IRUGO, wan_enable_show, wan_enable_store); /* --------------------------------------------------------------------- */ @@ -1226,7 +1224,6 @@ static struct attribute *wan_attributes[] = { }; static const struct attribute_group wan_attr_group = { - .name = TPACPI_WAN_SYSFS_GROUP, .attrs = wan_attributes, }; diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 440145a02617..72d62f2dabb9 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -278,8 +278,6 @@ static int beep_write(char *buf); * Bluetooth subdriver */ -#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth" - enum { /* ACPI GBDC/SBDC bits */ TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */ @@ -416,8 +414,6 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc); * Hotkey subdriver */ -#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey" - static int hotkey_orig_status; static int hotkey_orig_mask; @@ -553,8 +549,6 @@ static int volume_write(char *buf); * Wan subdriver */ -#define TPACPI_WAN_SYSFS_GROUP "wwan" - enum { /* ACPI GWAN/SWAN bits */ TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */ diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index b62cd36ff324..e2fcee2b340d 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -13,7 +13,7 @@ extern int pxm_to_node(int); extern int node_to_pxm(int); -extern int __cpuinit acpi_map_pxm_to_node(int); +extern int acpi_map_pxm_to_node(int); extern void __cpuinit acpi_unmap_pxm_to_node(int); #endif /* CONFIG_ACPI_NUMA */ diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5e07db0d46e9..ca882b8e7d10 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -78,7 +78,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status acpi_os_initialize(void); +acpi_status __initdata acpi_os_initialize(void); acpi_status acpi_os_terminate(void); @@ -236,6 +236,7 @@ acpi_os_derive_pci_id(acpi_handle rhandle, * Miscellaneous */ acpi_status acpi_os_validate_interface(char *interface); +acpi_status acpi_osi_invalidate(char* interface); acpi_status acpi_os_validate_address(u8 space_id, diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index e08f7df85a4f..b5cca5daa348 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -55,7 +55,7 @@ acpi_status acpi_initialize_tables(struct acpi_table_desc *initial_storage, u32 initial_table_count, u8 allow_resize); -acpi_status acpi_initialize_subsystem(void); +acpi_status __init acpi_initialize_subsystem(void); acpi_status acpi_enable_subsystem(u32 flags); diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index 15a838862cd4..a87ef1c8d46b 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -390,6 +390,8 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object); u8 acpi_ut_valid_internal_object(void *object); +union acpi_operand_object *acpi_ut_create_package_object(u32 count); + union acpi_operand_object *acpi_ut_create_buffer_object(acpi_size buffer_size); union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size); diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h index d9a3a8ca58a1..94d0294341d6 100644 --- a/include/asm-powerpc/pgalloc-64.h +++ b/include/asm-powerpc/pgalloc-64.h @@ -90,7 +90,8 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - return virt_to_page(pte_alloc_one_kernel(mm, address)); + pte_t *pte = pte_alloc_one_kernel(mm, address); + return pte ? virt_to_page(pte) : NULL; } static inline void pte_free_kernel(pte_t *pte) diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h index 0a17682663d8..66714042e438 100644 --- a/include/asm-powerpc/tlb.h +++ b/include/asm-powerpc/tlb.h @@ -38,6 +38,15 @@ extern void pte_free_finish(void); static inline void tlb_flush(struct mmu_gather *tlb) { + struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + + /* If there's a TLB batch pending, then we must flush it because the + * pages are going to be freed and we really don't want to have a CPU + * access a freed page because it has a stale TLB + */ + if (tlbbatch->index) + __flush_tlb_pending(tlbbatch); + pte_free_finish(); } |