/* * Bitbanged MDIO support. * * Author: Scott Wood * Copyright (c) 2007 Freescale Semiconductor * * Based on CPM2 MDIO code which is: * * Copyright (c) 2003 Intracom S.A. * by Pantelis Antoniou * * 2005 (c) MontaVista Software, Inc. * Vitaly Bordug * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ #include #include #include #include #define MDIO_READ 1 #define MDIO_WRITE 0 #define MDIO_SETUP_TIME 10 #define MDIO_HOLD_TIME 10 /* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY * is done twice per period. */ #define MDIO_DELAY 250 /* The PHY may take up to 300 ns to produce data, plus some margin * for error. */ #define MDIO_READ_DELAY 350 /* MDIO must already be configured as output. */ static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val) { const struct mdiobb_ops *ops = ctrl->ops; ops->set_mdio_data(ctrl, val); ndelay(MDIO_DELAY); ops->set_mdc(ctrl, 1); ndelay(MDIO_DELAY); ops->set_mdc(ctrl, 0); } /* MDIO must already be configured as input. */ static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl) { const struct mdiobb_ops *ops = ctrl->ops; ndelay(MDIO_DELAY); ops->set_mdc(ctrl, 1); ndelay(MDIO_READ_DELAY); ops->set_mdc(ctrl, 0); return ops->get_mdio_data(ctrl); } /* MDIO must already be configured as output. */ static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits) { int i; for (i = bits - 1; i >= 0; i--) mdiobb_send_bit(ctrl, (val >> i) & 1); } /* MDIO must already be configured as input. */ static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits) { int i; u16 ret = 0; for (i = bits - 1; i >= 0; i--) { ret <<= 1; ret |= mdiobb_get_bit(ctrl); } return ret; } /* Utility to send the preamble, address, and * register (common to read and write). */ static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg) { const struct mdiobb_ops *ops = ctrl->ops; int i; ops->set_mdio_dir(ctrl, 1); /* * Send a 32 bit preamble ('1's) with an extra '1' bit for good * measure. The IEEE spec says this is a PHY optional * requirement. The AMD 79C874 requires one after power up and * one after a MII communications error. This means that we are * doing more preambles than we need, but it is safer and will be * much more robust. */ for (i = 0; i < 32; i++) mdiobb_send_bit(ctrl, 1); /* send the start bit (01) and the read opcode (10) or write (10) */ mdiobb_send_bit(ctrl, 0); mdiobb_send_bit(ctrl, 1); mdiobb_send_bit(ctrl, read); mdiobb_send_bit(ctrl, !read); mdiobb_send_num(ctrl, phy, 5); mdiobb_send_num(ctrl, reg, 5); } static int mdiobb_read(struct mii_bus *bus, int phy, int reg) { struct mdiobb_ctrl *ctrl = bus->priv; int ret, i; mdiobb_cmd(ctrl, MDIO_READ, phy, reg); ctrl->ops->set_mdio_dir(ctrl, 0); /* check the turnaround bit: the PHY should be driving it to zero */ if (mdiobb_get_bit(ctrl) != 0) { /* PHY didn't drive TA low -- flush any bits it * may be trying to send. */ for (i = 0; i < 32; i++) mdiobb_get_bit(ctrl); return 0xffff; } ret = mdiobb_get_num(ctrl, 16); mdiobb_get_bit(ctrl); return ret; } static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) { struct mdiobb_ctrl *ctrl = bus->priv; mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg); /* send the turnaround (10) */ mdiobb_send_bit(ctrl, 1); mdiobb_send_bit(ctrl, 0); mdiobb_send_num(ctrl, val, 16); ctrl->ops->set_mdio_dir(ctrl, 0); mdiobb_get_bit(ctrl); return 0; } struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl) { struct mii_bus *bus; bus = mdiobus_alloc(); if (!bus) return NULL; __module_get(ctrl->ops->owner); bus->read = mdiobb_read; bus->write = mdiobb_write; bus->priv = ctrl; return bus; } EXPORT_SYMBOL(alloc_mdio_bitbang); void free_mdio_bitbang(struct mii_bus *bus) { struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); MODULE_LICENSE("GPL");