/* * pata_winbond.c - Winbond VLB ATA controllers * (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported. */ #include #include #include #include #include #include #include #include #define DRV_NAME "pata_winbond" #define DRV_VERSION "0.0.3" #define NR_HOST 4 /* Two winbond controllers, two channels each */ struct winbond_data { unsigned long config; struct platform_device *platform_dev; }; static struct ata_host *winbond_host[NR_HOST]; static struct winbond_data winbond_data[NR_HOST]; static int nr_winbond_host; #ifdef MODULE static int probe_winbond = 1; #else static int probe_winbond; #endif static DEFINE_SPINLOCK(winbond_lock); static void winbond_writecfg(unsigned long port, u8 reg, u8 val) { unsigned long flags; spin_lock_irqsave(&winbond_lock, flags); outb(reg, port + 0x01); outb(val, port + 0x02); spin_unlock_irqrestore(&winbond_lock, flags); } static u8 winbond_readcfg(unsigned long port, u8 reg) { u8 val; unsigned long flags; spin_lock_irqsave(&winbond_lock, flags); outb(reg, port + 0x01); val = inb(port + 0x02); spin_unlock_irqrestore(&winbond_lock, flags); return val; } static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct winbond_data *winbond = ap->host->private_data; int active, recovery; u8 reg; int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); reg = winbond_readcfg(winbond->config, 0x81); /* Get the timing data in cycles */ if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); else ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; timing = (active << 4) | recovery; winbond_writecfg(winbond->config, timing, reg); /* Load the setup timing */ reg = 0x35; if (adev->class != ATA_DEV_ATA) reg |= 0x08; /* FIFO off */ if (!ata_pio_need_iordy(adev)) reg |= 0x02; /* IORDY off */ reg |= (clamp_val(t.setup, 0, 3) << 6); winbond_writecfg(winbond->config, timing + 1, reg); } static unsigned int winbond_data_xfer(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { struct ata_port *ap = dev->link->ap; int slop = buflen & 3; if (ata_id_has_dword_io(dev->id)) { if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); } else { memcpy(&pad, buf + buflen - slop, slop); iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } buflen += 4 - slop; } } else buflen = ata_sff_data_xfer(dev, buf, buflen, rw); return buflen; } static struct scsi_host_template winbond_sht = { ATA_PIO_SHT(DRV_NAME), }; static struct ata_port_operations winbond_port_ops = { .inherits = &ata_sff_port_ops, .sff_data_xfer = winbond_data_xfer, .cable_detect = ata_cable_40wire, .set_piomode = winbond_set_piomode, }; /** * winbond_init_one - attach a winbond interface * @type: Type to display * @io: I/O port start * @irq: interrupt line * @fast: True if on a > 33Mhz VLB * * Register a VLB bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. */ static __init int winbond_init_one(unsigned long port) { struct platform_device *pdev; u8 reg; int i, rc; reg = winbond_readcfg(port, 0x81); reg |= 0x80; /* jumpered mode off */ winbond_writecfg(port, 0x81, reg); reg = winbond_readcfg(port, 0x83); reg |= 0xF0; /* local control */ winbond_writecfg(port, 0x83, reg); reg = winbond_readcfg(port, 0x85); reg |= 0xF0; /* programmable timing */ winbond_writecfg(port, 0x85, reg); reg = winbond_readcfg(port, 0x81); if (!(reg & 0x03)) /* Disabled */ return -ENODEV; for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); unsigned long ctl_port = cmd_port + 0x206; struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; if (!(reg & (1 << i))) continue; pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); rc = -ENOMEM; host = ata_host_alloc(&pdev->dev, 1); if (!host) goto err_unregister; ap = host->ports[0]; rc = -ENOMEM; cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); if (!cmd_addr || !ctl_addr) goto err_unregister; ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); ap->ops = &winbond_port_ops; ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; ata_sff_std_ports(&ap->ioaddr); /* hook in a private data structure per channel */ host->private_data = &winbond_data[nr_winbond_host]; winbond_data[nr_winbond_host].config = port; winbond_data[nr_winbond_host].platform_dev = pdev; /* activate */ rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0, &winbond_sht); if (rc) goto err_unregister; winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); } return 0; err_unregister: platform_device_unregister(pdev); return rc; } /** * winbond_init - attach winbond interfaces * * Attach winbond IDE interfaces by scanning the ports it may occupy. */ static __init int winbond_init(void) { static const unsigned long config[2] = { 0x130, 0x1B0 }; int ct = 0; int i; if (probe_winbond == 0) return -ENODEV; /* * Check both base addresses */ for (i = 0; i < 2; i++) { if (probe_winbond & (1<