/* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 * * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. * Note, this driver is not used at all on other systems because * there the "BIOS" has done all of the following already. * Due to massive hardware bugs, UltraDMA is only supported * on the 646U2 and not on the 646U. * * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 1998 David S. Miller (davem@redhat.com) * * Copyright (C) 1999-2002 Andre Hedrick * * TODO * Testing work */ #include #include #include #include #include #include #include #include #define DRV_NAME "pata_cmd64x" #define DRV_VERSION "0.2.5" /* * CMD64x specific registers definition. */ enum { CFR = 0x50, CFR_INTR_CH0 = 0x02, CNTRL = 0x51, CNTRL_DIS_RA0 = 0x40, CNTRL_DIS_RA1 = 0x80, CNTRL_ENA_2ND = 0x08, CMDTIM = 0x52, ARTTIM0 = 0x53, DRWTIM0 = 0x54, ARTTIM1 = 0x55, DRWTIM1 = 0x56, ARTTIM23 = 0x57, ARTTIM23_DIS_RA2 = 0x04, ARTTIM23_DIS_RA3 = 0x08, ARTTIM23_INTR_CH1 = 0x10, ARTTIM2 = 0x57, ARTTIM3 = 0x57, DRWTIM23 = 0x58, DRWTIM2 = 0x58, BRST = 0x59, DRWTIM3 = 0x5b, BMIDECR0 = 0x70, MRDMODE = 0x71, MRDMODE_INTR_CH0 = 0x04, MRDMODE_INTR_CH1 = 0x08, MRDMODE_BLK_CH0 = 0x10, MRDMODE_BLK_CH1 = 0x20, BMIDESR0 = 0x72, UDIDETCR0 = 0x73, DTPR0 = 0x74, BMIDECR1 = 0x78, BMIDECSR = 0x79, BMIDESR1 = 0x7A, UDIDETCR1 = 0x7B, DTPR1 = 0x7C }; static int cmd648_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 r; /* Check cable detect bits */ pci_read_config_byte(pdev, BMIDECSR, &r); if (r & (1 << ap->port_no)) return ATA_CBL_PATA80; return ATA_CBL_PATA40; } /** * cmd64x_set_piomode - set PIO and MWDMA timing * @ap: ATA interface * @adev: ATA device * @mode: mode * * Called to do the PIO and MWDMA mode setup. */ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_timing t; const unsigned long T = 1000000 / 33; const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; u8 reg; /* Port layout is not logical so use a table */ const u8 arttim_port[2][2] = { { ARTTIM0, ARTTIM1 }, { ARTTIM23, ARTTIM23 } }; const u8 drwtim_port[2][2] = { { DRWTIM0, DRWTIM1 }, { DRWTIM2, DRWTIM3 } }; int arttim = arttim_port[ap->port_no][adev->devno]; int drwtim = drwtim_port[ap->port_no][adev->devno]; /* ata_timing_compute is smart and will produce timings for MWDMA that don't violate the drives PIO capabilities. */ if (ata_timing_compute(adev, mode, &t, T, 0) < 0) { printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); return; } if (ap->port_no) { /* Slave has shared address setup */ struct ata_device *pair = ata_dev_pair(adev); if (pair) { struct ata_timing tp; ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } } printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n", t.active, t.recover, t.setup); if (t.recover > 16) { t.active += t.recover - 16; t.recover = 16; } if (t.active > 16) t.active = 16; /* Now convert the clocks into values we can actually stuff into the chip */ if (t.recover > 1) t.recover--; else t.recover = 15; if (t.setup > 4) t.setup = 0xC0; else t.setup = setup_data[t.setup]; t.active &= 0x0F; /* 0 = 16 */ /* Load setup timing */ pci_read_config_byte(pdev, arttim, ®); reg &= 0x3F; reg |= t.setup; pci_write_config_byte(pdev, arttim, reg); /* Load active/recovery */ pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover); } /** * cmd64x_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device * * Used when configuring the devices ot set the PIO timings. All the * actual work is done by the PIO/MWDMA setting helper */ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) { cmd64x_set_timing(ap, adev, adev->pio_mode); } /** * cmd64x_set_dmamode - set initial DMA mode data * @ap: ATA interface * @adev: ATA device * * Called to do the DMA mode setup. */ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static const u8 udma_data[] = { 0x30, 0x20, 0x10, 0x20, 0x10, 0x00 }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 regU, regD; int pciU = UDIDETCR0 + 8 * ap->port_no; int pciD = BMIDESR0 + 8 * ap->port_no; int shift = 2 * adev->devno; pci_read_config_byte(pdev, pciD, ®D); pci_read_config_byte(pdev, pciU, ®U); /* DMA bits off */ regD &= ~(0x20 << adev->devno); /* DMA control bits */ regU &= ~(0x30 << shift); /* DMA timing bits */ regU &= ~(0x05 << adev->devno); if (adev->dma_mode >= XFER_UDMA_0) { /* Merge the timing value */ regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; /* Merge the control bits */ regU |= 1 << adev->devno; /* UDMA on */ if (adev->dma_mode > 2) /* 15nS timing */ regU |= 4 << adev->devno; } else { regU &= ~ (1 << adev->devno); /* UDMA off */ cmd64x_set_timing(ap, adev, adev->dma_mode); } regD |= 0x20 << adev->devno; pci_write_config_byte(pdev, pciU, regU); pci_write_config_byte(pdev, pciD, regD); } /** * cmd648_dma_stop - DMA stop callback * @qc: Command in progress * * DMA has completed. */ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 dma_intr; int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; int dma_reg = ap->port_no ? ARTTIM2 : CFR; ata_bmdma_stop(qc); pci_read_config_byte(pdev, dma_reg, &dma_intr); pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask); } /** * cmd646r1_dma_stop - DMA stop callback * @qc: Command in progress * * Stub for now while investigating the r1 quirk in the old driver. */ static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) { ata_bmdma_stop(qc); } static struct scsi_host_template cmd64x_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static const struct ata_port_operations cmd64x_base_ops = { .inherits = &ata_bmdma_port_ops, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, }; static struct ata_port_operations cmd64x_port_ops = { .inherits = &cmd64x_base_ops, .cable_detect = ata_cable_40wire, }; static struct ata_port_operations cmd646r1_port_ops = { .inherits = &cmd64x_base_ops, .bmdma_stop = cmd646r1_bmdma_stop, .cable_detect = ata_cable_40wire, }; static struct ata_port_operations cmd648_port_ops = { .inherits = &cmd64x_base_ops, .bmdma_stop = cmd648_bmdma_stop, .cable_detect = cmd648_cable_detect, }; static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u32 class_rev; static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with broken UDMA */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with working UDMA */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 rev 1 */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd646r1_port_ops }, { /* CMD 648 */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cmd648_port_ops }, { /* CMD 649 */ .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cmd648_port_ops } }; const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL }; u8 mrdmode; int rc; rc = pcim_enable_device(pdev); if (rc) return rc; pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; if (id->driver_data == 0) /* 643 */ ata_pci_bmdma_clear_simplex(pdev); if (pdev->device == PCI_DEVICE_ID_CMD_646) { /* Does UDMA work ? */ if (class_rev > 4) ppi[0] = &cmd_info[2]; /* Early rev with other problems ? */ else if (class_rev == 1) ppi[0] = &cmd_info[3]; } pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pdev, MRDMODE, &mrdmode); mrdmode &= ~ 0x30; /* IRQ set up */ mrdmode |= 0x02; /* Memory read line enable */ pci_write_config_byte(pdev, MRDMODE, mrdmode); /* Force PIO 0 here.. */ /* PPC specific fixup copied from old driver */ #ifdef CONFIG_PPC pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL); } #ifdef CONFIG_PM static int cmd64x_reinit_one(struct pci_dev *pdev) { struct ata_host *host = dev_get_drvdata(&pdev->dev); u8 mrdmode; int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pdev, MRDMODE, &mrdmode); mrdmode &= ~ 0x30; /* IRQ set up */ mrdmode |= 0x02; /* Memory read line enable */ pci_write_config_byte(pdev, MRDMODE, mrdmode); #ifdef CONFIG_PPC pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif ata_host_resume(host); return 0; } #endif static const struct pci_device_id cmd64x[] = { { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 }, { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 }, { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 4 }, { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 5 }, { }, }; static struct pci_driver cmd64x_pci_driver = { .name = DRV_NAME, .id_table = cmd64x, .probe = cmd64x_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = cmd64x_reinit_one, #endif }; static int __init cmd64x_init(void) { return pci_register_driver(&cmd64x_pci_driver); } static void __exit cmd64x_exit(void) { pci_unregister_driver(&cmd64x_pci_driver); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, cmd64x); MODULE_VERSION(DRV_VERSION); module_init(cmd64x_init); module_exit(cmd64x_exit);