The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on an inaudible audio subcarrier of a radio program. This interface is aimed at devices capable of receiving and/or transmitting RDS information. For more information see the core RDS standard and the RBDS standard . Note that the RBDS standard as is used in the USA is almost identical to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the fields have slightly different meanings. See the RBDS standard for more information. The RBDS standard also specifies support for MMBS (Modified Mobile Search). This is a proprietary format which seems to be discontinued. The RDS interface does not support this format. Should support for MMBS (or the so-called 'E blocks' in general) be needed, then please contact the linux-media mailing list: &v4l-ml;.

Devices supporting the RDS capturing API set the V4L2_CAP_RDS_CAPTURE flag in the capabilities field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS will set the V4L2_TUNER_CAP_RDS flag in the capability field of &v4l2-tuner;. If the driver only passes RDS blocks without interpreting the data the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be set, see Reading RDS data. For future use the flag V4L2_TUNER_SUB_RDS_CONTROLS has also been defined. However, a driver for a radio tuner with this capability does not yet exist, so if you are planning to write such a driver you should discuss this on the linux-media mailing list: &v4l-ml;. Whether an RDS signal is present can be detected by looking at the rxsubchans field of &v4l2-tuner;: the V4L2_TUNER_SUB_RDS will be set if RDS data was detected. Devices supporting the RDS output API set the V4L2_CAP_RDS_OUTPUT flag in the capabilities field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. Any modulator that supports RDS will set the V4L2_TUNER_CAP_RDS flag in the capability field of &v4l2-modulator;. In order to enable the RDS transmission one must set the V4L2_TUNER_SUB_RDS bit in the txsubchans field of &v4l2-modulator;. If the driver only passes RDS blocks without interpreting the data the V4L2_TUNER_SUB_RDS_BLOCK_IO flag has to be set. If the tuner is capable of handling RDS entities like program identification codes and radio text, the flag V4L2_TUNER_SUB_RDS_CONTROLS should be set, see Writing RDS data and FM Transmitter Control Reference.

RDS data can be read from the radio device with the &func-read; function. The data is packed in groups of three bytes.

RDS data can be written to the radio device with the &func-write; function. The data is packed in groups of three bytes, as follows:

__u8 lsb Least Significant Byte of RDS Block __u8 msb Most Significant Byte of RDS Block __u8 block Block description Bits 0-2 Block (aka offset) of the received data. Bits 3-5 Deprecated. Currently identical to bits 0-2. Do not use these bits. Bit 6 Corrected bit. Indicates that an error was corrected for this data block. Bit 7 Error bit. Indicates that an uncorrectable error occurred during reception of this block. V4L2_RDS_BLOCK_MSK 7 Mask for bits 0-2 to get the block ID. V4L2_RDS_BLOCK_A 0 Block A. V4L2_RDS_BLOCK_B 1 Block B. V4L2_RDS_BLOCK_C 2 Block C. V4L2_RDS_BLOCK_D 3 Block D. V4L2_RDS_BLOCK_C_ALT 4 Block C'. V4L2_RDS_BLOCK_INVALID read-only 7 An invalid block. V4L2_RDS_BLOCK_CORRECTED read-only 0x40 A bit error was detected but corrected. V4L2_RDS_BLOCK_ERROR read-only 0x80 An uncorrectable error occurred.