From 949ad0a783729ad8c2e8e5bcbbad5d05a60de616 Mon Sep 17 00:00:00 2001 From: Eric Millbrandt Date: Fri, 6 Aug 2010 20:49:19 -0600 Subject: sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset Call the gpio reset platform function instead of using the flawed ac97 functionality of the MPC5200(b) From MPC5200B User's Manual: "Some AC97 devices goes to a test mode, if the Sync line is high during the Res line is low (reset phase). To avoid this behavior the Sync line must be also forced to zero during the reset phase. To do that, the pin muxing should switch to GPIO mode and the GPIO control register should be used to control the output lines." Signed-off-by: Eric Millbrandt Signed-off-by: Grant Likely --- sound/soc/fsl/mpc5200_psc_ac97.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c index e2ee220bfb7..e7f5d50ed08 100644 --- a/sound/soc/fsl/mpc5200_psc_ac97.c +++ b/sound/soc/fsl/mpc5200_psc_ac97.c @@ -20,6 +20,7 @@ #include #include +#include #include #include "mpc5200_dma.h" @@ -100,19 +101,32 @@ static void psc_ac97_warm_reset(struct snd_ac97 *ac97) { struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; + mutex_lock(&psc_dma->mutex); + out_be32(®s->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR); udelay(3); out_be32(®s->sicr, psc_dma->sicr); + + mutex_unlock(&psc_dma->mutex); } static void psc_ac97_cold_reset(struct snd_ac97 *ac97) { struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs; - /* Do a cold reset */ - out_8(®s->op1, MPC52xx_PSC_OP_RES); - udelay(10); - out_8(®s->op0, MPC52xx_PSC_OP_RES); + mutex_lock(&psc_dma->mutex); + dev_dbg(psc_dma->dev, "cold reset\n"); + + mpc5200_psc_ac97_gpio_reset(psc_dma->id); + + /* Notify the PSC that a reset has occurred */ + out_be32(®s->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_ACRB); + + /* Re-enable RX and TX */ + out_8(®s->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE); + + mutex_unlock(&psc_dma->mutex); + msleep(1); psc_ac97_warm_reset(ac97); } -- cgit v1.2.3