From 1db2740d78c74eb11c4d0906047d9c13229a89a4 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 28 Aug 2006 14:56:32 -0700 Subject: e1000: Use module param array code Use module param array code to distinguish between defaults and user specified values. Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_param.c | 161 +++++++++++++++++++++++++++------------- 1 file changed, 110 insertions(+), 51 deletions(-) (limited to 'drivers/net/e1000/e1000_param.c') diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 0ef413172c6..21284273897 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -324,7 +324,6 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, NOTICE, "Warning: no configuration for board #%i\n", bd); DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); - bd = E1000_MAX_NIC; } { /* Transmit Descriptor Count */ @@ -342,9 +341,14 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD; - tx_ring->count = TxDescriptors[bd]; - e1000_validate_option(&tx_ring->count, &opt, adapter); - E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); + if (num_TxDescriptors > bd) { + tx_ring->count = TxDescriptors[bd]; + e1000_validate_option(&tx_ring->count, &opt, adapter); + E1000_ROUNDUP(tx_ring->count, + REQ_TX_DESCRIPTOR_MULTIPLE); + } else { + tx_ring->count = opt.def; + } for (i = 0; i < adapter->num_tx_queues; i++) tx_ring[i].count = tx_ring->count; } @@ -363,9 +367,14 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD; - rx_ring->count = RxDescriptors[bd]; - e1000_validate_option(&rx_ring->count, &opt, adapter); - E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); + if (num_RxDescriptors > bd) { + rx_ring->count = RxDescriptors[bd]; + e1000_validate_option(&rx_ring->count, &opt, adapter); + E1000_ROUNDUP(rx_ring->count, + REQ_RX_DESCRIPTOR_MULTIPLE); + } else { + rx_ring->count = opt.def; + } for (i = 0; i < adapter->num_rx_queues; i++) rx_ring[i].count = rx_ring->count; } @@ -377,9 +386,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_ENABLED }; - int rx_csum = XsumRX[bd]; - e1000_validate_option(&rx_csum, &opt, adapter); - adapter->rx_csum = rx_csum; + if (num_XsumRX > bd) { + int rx_csum = XsumRX[bd]; + e1000_validate_option(&rx_csum, &opt, adapter); + adapter->rx_csum = rx_csum; + } else { + adapter->rx_csum = opt.def; + } } { /* Flow Control */ @@ -399,9 +412,13 @@ e1000_check_options(struct e1000_adapter *adapter) .p = fc_list }} }; - int fc = FlowControl[bd]; - e1000_validate_option(&fc, &opt, adapter); - adapter->hw.fc = adapter->hw.original_fc = fc; + if (num_FlowControl > bd) { + int fc = FlowControl[bd]; + e1000_validate_option(&fc, &opt, adapter); + adapter->hw.fc = adapter->hw.original_fc = fc; + } else { + adapter->hw.fc = adapter->hw.original_fc = opt.def; + } } { /* Transmit Interrupt Delay */ struct e1000_option opt = { @@ -413,8 +430,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXDELAY }} }; - adapter->tx_int_delay = TxIntDelay[bd]; - e1000_validate_option(&adapter->tx_int_delay, &opt, adapter); + if (num_TxIntDelay > bd) { + adapter->tx_int_delay = TxIntDelay[bd]; + e1000_validate_option(&adapter->tx_int_delay, &opt, + adapter); + } else { + adapter->tx_int_delay = opt.def; + } } { /* Transmit Absolute Interrupt Delay */ struct e1000_option opt = { @@ -426,9 +448,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXABSDELAY }} }; - adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; - e1000_validate_option(&adapter->tx_abs_int_delay, &opt, - adapter); + if (num_TxAbsIntDelay > bd) { + adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; + e1000_validate_option(&adapter->tx_abs_int_delay, &opt, + adapter); + } else { + adapter->tx_abs_int_delay = opt.def; + } } { /* Receive Interrupt Delay */ struct e1000_option opt = { @@ -440,8 +466,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXDELAY }} }; - adapter->rx_int_delay = RxIntDelay[bd]; - e1000_validate_option(&adapter->rx_int_delay, &opt, adapter); + if (num_RxIntDelay > bd) { + adapter->rx_int_delay = RxIntDelay[bd]; + e1000_validate_option(&adapter->rx_int_delay, &opt, + adapter); + } else { + adapter->rx_int_delay = opt.def; + } } { /* Receive Absolute Interrupt Delay */ struct e1000_option opt = { @@ -453,9 +484,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXABSDELAY }} }; - adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; - e1000_validate_option(&adapter->rx_abs_int_delay, &opt, - adapter); + if (num_RxAbsIntDelay > bd) { + adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; + e1000_validate_option(&adapter->rx_abs_int_delay, &opt, + adapter); + } else { + adapter->rx_abs_int_delay = opt.def; + } } { /* Interrupt Throttling Rate */ struct e1000_option opt = { @@ -467,18 +502,24 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_ITR }} }; - adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - DPRINTK(PROBE, INFO, "%s turned off\n", opt.name); - break; - case 1: - DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); - break; - default: - e1000_validate_option(&adapter->itr, &opt, adapter); - break; + if (num_InterruptThrottleRate > bd) { + adapter->itr = InterruptThrottleRate[bd]; + switch (adapter->itr) { + case 0: + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + break; + case 1: + DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", + opt.name); + break; + default: + e1000_validate_option(&adapter->itr, &opt, + adapter); + break; + } + } else { + adapter->itr = opt.def; } } { /* Smart Power Down */ @@ -489,9 +530,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_DISABLED }; - int spd = SmartPowerDownEnable[bd]; - e1000_validate_option(&spd, &opt, adapter); - adapter->smart_power_down = spd; + if (num_SmartPowerDownEnable > bd) { + int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); + adapter->smart_power_down = spd; + } else { + adapter->smart_power_down = opt.def; + } } { /* Kumeran Lock Loss Workaround */ struct e1000_option opt = { @@ -501,9 +546,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_ENABLED }; + if (num_KumeranLockLoss > bd) { int kmrn_lock_loss = KumeranLockLoss[bd]; e1000_validate_option(&kmrn_lock_loss, &opt, adapter); adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; + } else { + adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def; + } } switch (adapter->hw.media_type) { @@ -530,18 +579,17 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter) { int bd = adapter->bd_number; - bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; - if ((Speed[bd] != OPTION_UNSET)) { + if (num_Speed > bd) { DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, " "parameter ignored\n"); } - if ((Duplex[bd] != OPTION_UNSET)) { + if (num_Duplex > bd) { DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, " "parameter ignored\n"); } - if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) { + if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) { DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is " "not valid for fiber adapters, " "parameter ignored\n"); @@ -560,7 +608,6 @@ e1000_check_copper_options(struct e1000_adapter *adapter) { int speed, dplx, an; int bd = adapter->bd_number; - bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; { /* Speed */ struct e1000_opt_list speed_list[] = {{ 0, "" }, @@ -577,8 +624,12 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = speed_list }} }; - speed = Speed[bd]; - e1000_validate_option(&speed, &opt, adapter); + if (num_Speed > bd) { + speed = Speed[bd]; + e1000_validate_option(&speed, &opt, adapter); + } else { + speed = opt.def; + } } { /* Duplex */ struct e1000_opt_list dplx_list[] = {{ 0, "" }, @@ -600,11 +651,15 @@ e1000_check_copper_options(struct e1000_adapter *adapter) "Speed/Duplex/AutoNeg parameter ignored.\n"); return; } - dplx = Duplex[bd]; - e1000_validate_option(&dplx, &opt, adapter); + if (num_Duplex > bd) { + dplx = Duplex[bd]; + e1000_validate_option(&dplx, &opt, adapter); + } else { + dplx = opt.def; + } } - if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) { + if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) { DPRINTK(PROBE, INFO, "AutoNeg specified along with Speed or Duplex, " "parameter ignored\n"); @@ -653,15 +708,19 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = an_list }} }; - an = AutoNeg[bd]; - e1000_validate_option(&an, &opt, adapter); + if (num_AutoNeg > bd) { + an = AutoNeg[bd]; + e1000_validate_option(&an, &opt, adapter); + } else { + an = opt.def; + } adapter->hw.autoneg_advertised = an; } switch (speed + dplx) { case 0: adapter->hw.autoneg = adapter->fc_autoneg = 1; - if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET) + if ((num_Speed > bd) && (speed != 0 || dplx != 0)) DPRINTK(PROBE, INFO, "Speed and duplex autonegotiation enabled\n"); break; -- cgit v1.2.3