From 4562c986f0d694124de20815adf7e1aad8a94668 Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Fri, 27 Aug 2010 11:58:21 +0000 Subject: powerpc/kexec: Adds correct calling convention for kexec purgatory Call kexec purgatory code correctly. We were getting lucky before. If you examine the powerpc 32bit kexec "purgatory" code you will see it expects the following: >From kexec-tools: purgatory/arch/ppc/v2wrap_32.S -> calling convention: -> r3 = physical number of this cpu (all cpus) -> r4 = address of this chunk (master only) As such, we need to set r3 to the current core, r4 happens to be unused by purgatory at the moment but we go ahead and set it here as well Signed-off-by: Matthew McClintock Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_32.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 6bbd7a604d2..a7a570dcdd5 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -810,6 +810,9 @@ relocate_new_kernel: isync sync + mfspr r3, SPRN_PIR /* current core we are running on */ + mr r4, r5 /* load physical address of chunk called */ + /* jump to the entry point, usually the setup routine */ mtlr r5 blrl -- cgit v1.2.3 From b0d278b7d3ae9115939ddcea93f516308cc367e2 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 10 Aug 2010 20:38:23 +0000 Subject: powerpc/perf_event: Reduce latency of calling perf_event_do_pending Commit 0fe1ac48 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") moved the call to perf_event_do_pending in timer_interrupt() down so that it was after the irq_enter() call. Unfortunately this moved it after the code that checks whether it is time for the next decrementer clock event. The result is that the call to perf_event_do_pending() won't happen until the next decrementer clock event is due. This was pointed out by Milton Miller. This fixes it by moving the check for whether it's time for the next decrementer clock event down to the point where we're about to call the event handler, after we've called perf_event_do_pending. This has the side effect that on old pre-Core99 Powermacs where we use the ppc_n_lost_interrupts mechanism to replay interrupts, a replayed interrupt will incur a little more latency since it will now do the code from the irq_enter down to the irq_exit, that it used to skip. However, these machines are now old and rare enough that this doesn't matter. To make it clear that ppc_n_lost_interrupts is only used on Powermacs, and to speed up the code slightly on non-Powermac ppc32 machines, the code that tests ppc_n_lost_interrupts is now conditional on CONFIG_PMAC as well as CONFIG_PPC32. Signed-off-by: Paul Mackerras Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index ce53dfa7130..8533b3b83f5 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -577,20 +577,11 @@ void timer_interrupt(struct pt_regs * regs) * some CPUs will continuue to take decrementer exceptions */ set_dec(DECREMENTER_MAX); -#ifdef CONFIG_PPC32 +#if defined(CONFIG_PPC32) && defined(CONFIG_PMAC) if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); #endif - now = get_tb_or_rtc(); - if (now < decrementer->next_tb) { - /* not time for this event yet */ - now = decrementer->next_tb - now; - if (now <= DECREMENTER_MAX) - set_dec((int)now); - trace_timer_interrupt_exit(regs); - return; - } old_regs = set_irq_regs(regs); irq_enter(); @@ -606,8 +597,16 @@ void timer_interrupt(struct pt_regs * regs) get_lppaca()->int_dword.fields.decr_int = 0; #endif - if (evt->event_handler) - evt->event_handler(evt); + now = get_tb_or_rtc(); + if (now >= decrementer->next_tb) { + decrementer->next_tb = ~(u64)0; + if (evt->event_handler) + evt->event_handler(evt); + } else { + now = decrementer->next_tb - now; + if (now <= DECREMENTER_MAX) + set_dec((int)now); + } #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) -- cgit v1.2.3 From 54a834043314c257210db2a9d59f8cc605571639 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Aug 2010 21:04:25 +0000 Subject: powerpc: Don't use kernel stack with translation off In f761622e59433130bc33ad086ce219feee9eb961 we changed early_setup_secondary so it's called using the proper kernel stack rather than the emergency one. Unfortunately, this stack pointer can't be used when translation is off on PHYP as this stack pointer might be outside the RMO. This results in the following on all non zero cpus: cpu 0x1: Vector: 300 (Data Access) at [c00000001639fd10] pc: 000000000001c50c lr: 000000000000821c sp: c00000001639ff90 msr: 8000000000001000 dar: c00000001639ffa0 dsisr: 42000000 current = 0xc000000016393540 paca = 0xc000000006e00200 pid = 0, comm = swapper The original patch was only tested on bare metal system, so it never caught this problem. This changes __secondary_start so that we calculate the new stack pointer but only start using it after we've called early_setup_secondary. With this patch, the above problem goes away. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_64.S | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 4d6681dce81..c571cd3c145 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -575,13 +575,19 @@ __secondary_start: /* Initialize the kernel stack. Just a repeat for iSeries. */ LOAD_REG_ADDR(r3, current_set) sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r1,r3,r28 - addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD - std r1,PACAKSAVE(r13) + ldx r14,r3,r28 + addi r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD + std r14,PACAKSAVE(r13) /* Do early setup for that CPU (stab, slb, hash table pointer) */ bl .early_setup_secondary + /* + * setup the new stack pointer, but *don't* use this until + * translation is on. + */ + mr r1, r14 + /* Clear backchain so we get nice backtraces */ li r7,0 mtlr r7 -- cgit v1.2.3 From 6d4f2fb0860c36e7ef16cc41126242a8b6542771 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Tue, 31 Aug 2010 04:15:22 +0200 Subject: powerpc/85xx: Fix compilation of mpc85xx_mds.c Commit 99d8238f berobbed the for_each loop of its iterator! Let's be nice and give it back, so it compiles for us. CC: Anton Vorontsov Signed-off-by: Alexander Graf Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index da64be19d09..aa34cac4eb5 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -357,6 +357,7 @@ static void __init mpc85xx_mds_setup_arch(void) { #ifdef CONFIG_PCI struct pci_controller *hose; + struct device_node *np; #endif dma_addr_t max = 0xffffffff; -- cgit v1.2.3 From dc1c41f450a5f201f1d8c19aef32319f3b84c273 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 31 Aug 2010 11:39:25 -0500 Subject: powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblock arch/powerpc/platforms/85xx/p1022_ds.c:22:23: error: linux/lmb.h: No such file or directory arch/powerpc/platforms/85xx/p1022_ds.c: In function 'p1022_ds_setup_arch': arch/powerpc/platforms/85xx/p1022_ds.c:100: error: implicit declaration of function 'memblock_end_of_DRAM' arch/powerpc/platforms/85xx/p1022_ds.c: At top level: arch/powerpc/platforms/85xx/p1022_ds.c:147: error: 'udbg_progress' undeclared here (not in a function) make[2]: *** [arch/powerpc/platforms/85xx/p1022_ds.o] Error 1 Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p1022_ds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e1467c93745..34e00902ce8 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include @@ -97,7 +97,7 @@ static void __init p1022_ds_setup_arch(void) #endif #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; -- cgit v1.2.3 From ff33f1821259d00d3fd85d86f59783e2ca3c9ee1 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 18 Jun 2010 14:24:20 +0800 Subject: fsl_rio: fix compile errors Fixes the following compile problem on E500 platforms: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception': arch/powerpc/sysdev/fsl_rio.c:248: error: 'MCSR_MASK' undeclared (first use in this function) Also fixes the compile problem on non-E500 platforms. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_rio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 6425abe5b7d..3017532319c 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -240,12 +240,13 @@ struct rio_priv { static void __iomem *rio_regs_win; +#ifdef CONFIG_E500 static int (*saved_mcheck_exception)(struct pt_regs *regs); static int fsl_rio_mcheck_exception(struct pt_regs *regs) { const struct exception_table_entry *entry = NULL; - unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK); + unsigned long reason = mfspr(SPRN_MCSR); if (reason & MCSR_BUS_RBERR) { reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); @@ -269,6 +270,7 @@ static int fsl_rio_mcheck_exception(struct pt_regs *regs) else return cur_cpu_spec->machine_check(regs); } +#endif /** * fsl_rio_doorbell_send - Send a MPC85xx doorbell message @@ -1517,8 +1519,10 @@ int fsl_rio_setup(struct platform_device *dev) fsl_rio_doorbell_init(port); fsl_rio_port_write_init(port); +#ifdef CONFIG_E500 saved_mcheck_exception = ppc_md.machine_check_exception; ppc_md.machine_check_exception = fsl_rio_mcheck_exception; +#endif /* Ensure that RFXE is set */ mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000)); -- cgit v1.2.3 From fa9fc821f8892590211a9aa9e855eb83152b9870 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 29 Aug 2010 21:47:18 +0200 Subject: arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmap The function of_iomap returns the result of calling ioremap, so iounmap should be called on the result in the error handling code, as done in the normal exit of the function. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ local idexpression x; expression E,E1; identifier l; statement S; @@ *x = of_iomap(...); ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } when != E = x when any ( if (x == NULL) S | if (...) { ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } ( return <+...x...+>; | * return ...; ) } ) ... when != x = E1 when any iounmap(x); // Signed-off-by: Julia Lawall Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc837x_mds.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index f9751c8905b..83068322abd 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -48,8 +48,10 @@ static int mpc837xmds_usb_cfg(void) return -1; np = of_find_node_by_name(NULL, "usb"); - if (!np) - return -ENODEV; + if (!np) { + ret = -ENODEV; + goto out; + } phy_type = of_get_property(np, "phy_type", NULL); if (phy_type && !strcmp(phy_type, "ulpi")) { clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN); @@ -65,8 +67,9 @@ static int mpc837xmds_usb_cfg(void) } of_node_put(np); +out: iounmap(bcsr_regs); - return 0; + return ret; } /* ************************************************************************ -- cgit v1.2.3 From 5aac4d73dc234fe7be91679b547af2436d7f8d1e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 29 Aug 2010 11:52:44 +0200 Subject: arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leak Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ local idexpression x; expression E,E1; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> of_node_put(x); // Signed-off-by: Julia Lawall Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 3da8014931c..90020de4dcf 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -640,6 +640,7 @@ unsigned int qe_get_num_of_snums(void) if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { /* No QE ever has fewer than 28 SNUMs */ pr_err("QE: number of snum is invalid\n"); + of_node_put(qe); return -EINVAL; } } -- cgit v1.2.3 From a28dec2f26013aad89446b1f708f948617bc28a2 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sun, 8 Aug 2010 18:03:33 +0400 Subject: powerpc/85xx: Add P1021 PCI IDs and quirks This is needed for proper PCI-E support on P1021 SoCs. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 209384b6e03..4ae93322525 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -399,6 +399,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); -- cgit v1.2.3 From 93f68f1ef787d97ab688f78a01f446e85bb9a496 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Wed, 18 Aug 2010 09:58:46 +0000 Subject: powerpc/pseries: Correct rtas_data_buf locking in dlpar code The dlpar code can cause a deadlock to occur when making the RTAS configure-connector call. This occurs because we make kmalloc calls, which can block, while parsing the rtas_data_buf and holding the rtas_data_buf_lock. This an cause issues if someone else attempts to grab the rtas_data_bug_lock. This patch alleviates this issue by copying the contents of the rtas_data_buf to a local buffer before parsing. This allows us to only hold the rtas_data_buf_lock around the RTAS configure-connector calls. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dlpar.c | 42 +++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 227c1c3d585..72d8054fa73 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -129,20 +129,35 @@ struct device_node *dlpar_configure_connector(u32 drc_index) struct property *property; struct property *last_property = NULL; struct cc_workarea *ccwa; + char *data_buf; int cc_token; - int rc; + int rc = -1; cc_token = rtas_token("ibm,configure-connector"); if (cc_token == RTAS_UNKNOWN_SERVICE) return NULL; - spin_lock(&rtas_data_buf_lock); - ccwa = (struct cc_workarea *)&rtas_data_buf[0]; + data_buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!data_buf) + return NULL; + + ccwa = (struct cc_workarea *)&data_buf[0]; ccwa->drc_index = drc_index; ccwa->zero = 0; - rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); - while (rc) { + do { + /* Since we release the rtas_data_buf lock between configure + * connector calls we want to re-populate the rtas_data_buffer + * with the contents of the previous call. + */ + spin_lock(&rtas_data_buf_lock); + + memcpy(rtas_data_buf, data_buf, RTAS_DATA_BUF_SIZE); + rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); + memcpy(data_buf, rtas_data_buf, RTAS_DATA_BUF_SIZE); + + spin_unlock(&rtas_data_buf_lock); + switch (rc) { case NEXT_SIBLING: dn = dlpar_parse_cc_node(ccwa); @@ -197,18 +212,19 @@ struct device_node *dlpar_configure_connector(u32 drc_index) "returned from configure-connector\n", rc); goto cc_error; } + } while (rc); - rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); +cc_error: + kfree(data_buf); + + if (rc) { + if (first_dn) + dlpar_free_cc_nodes(first_dn); + + return NULL; } - spin_unlock(&rtas_data_buf_lock); return first_dn; - -cc_error: - if (first_dn) - dlpar_free_cc_nodes(first_dn); - spin_unlock(&rtas_data_buf_lock); - return NULL; } static struct device_node *derive_parent(const char *path) -- cgit v1.2.3