aboutsummaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)Author
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-09mbcache: Remove unused featuresAndreas Gruenbacher
The mbcache code was written to support a variable number of indexes, but all the existing users use exactly one index. Simplify to code to support only that case. There are also no users of the cache entry free operation, and none of the users keep extra data in cache entries. Remove those features as well. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09convert ext4 to ->evict_inode()Al Viro
pretty much brute-force... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09remove inode_setattrChristoph Hellwig
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09introduce __block_write_beginChristoph Hellwig
Split up the block_write_begin implementation - __block_write_begin is a new trivial wrapper for block_prepare_write that always takes an already allocated page and can be either called from block_write_begin or filesystem code that already has a page allocated. Remove the handling of already allocated pages from block_write_begin after switching all callers that do it to __block_write_begin. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09sort out blockdev_direct_IO variantsChristoph Hellwig
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-07Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: Adding error check after calling ext4_mb_regular_allocator() ext4: Fix dirtying of journalled buffers in data=journal mode ext4: re-inline ext4_rec_len_(to|from)_disk functions jbd2: Remove t_handle_lock from start_this_handle() jbd2: Change j_state_lock to be a rwlock_t jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop ext4: Add mount options in superblock ext4: force block allocation on quota_off ext4: fix freeze deadlock under IO ext4: drop inode from orphan list if ext4_delete_inode() fails ext4: check to make make sure bd_dev is set before dereferencing it jbd2: Make barrier messages less scary ext4: don't print scary messages for allocation failures post-abort ext4: fix EFBIG edge case when writing to large non-extent file ext4: fix ext4_get_blocks references ext4: Always journal quota file modifications ext4: Fix potential memory leak in ext4_fill_super ext4: Don't error out the fs if the user tries to make a file too big ext4: allocate stripe-multiple IOs on stripe boundaries ext4: move aio completion after unwritten extent conversion ... Fix up conflicts in fs/ext4/inode.c as per Ted. Fix up xfs conflicts as per earlier xfs merge.
2010-08-05ext4: Adding error check after calling ext4_mb_regular_allocator()Aditya Kali
If the bitmap block on disk is bad, ext4_mb_load_buddy() returns an error. This error is returned to the caller, ext4_mb_regular_allocator() and then to ext4_mb_new_blocks(). But ext4_mb_new_blocks() did not check for the return value of ext4_mb_regular_allocator() and would repeatedly try to load the bitmap block. The fix simply catches the return value and exits out of the 'repeat' loop after cleanup. We also take the opportunity to clean up the error handling in ext4_mb_new_blocks(). Google-Bug-Id: 2853530 Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-05ext4: Fix dirtying of journalled buffers in data=journal modeJan Kara
In data=journal mode, we still use block_write_begin() to prepare page for writing. This function can occasionally mark buffer dirty which violates journalling assumptions - when a buffer is part of a transaction, it should be dirty and a buffer can be already part of a forget list of some transaction when block_write_begin() gets called. This violation of journalling assumptions then results in "JBD: Spotted dirty metadata buffer..." warnings. In fact, temporary dirtying the buffer while the page is still locked does not really cause problems to the journalling because we won't write the buffer until the page gets unlocked. So we just have to make sure to clear dirty bits before unlocking the page. Signed-off-by: Jan Kara <jack@suse.cz>
2010-08-05ext4: re-inline ext4_rec_len_(to|from)_disk functionsEric Sandeen
commit 3d0518f4, "ext4: New rec_len encoding for very large blocksizes" made several changes to this path, but from a perf perspective, un-inlining ext4_rec_len_from_disk() seems most significant. This function is called from ext4_check_dir_entry(), which on a file-creation workload is called extremely often. I tested this with bonnie: # bonnie++ -u root -s 0 -f -x 200 -d /mnt/test -n 32 (this does 200 iterations) and got this for the file creations: ext4 stock: Average = 21206.8 files/s ext4 inlined: Average = 22346.7 files/s (+5%) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-04fix comment typo "choosed" -> "chosen"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-03jbd2: Change j_state_lock to be a rwlock_tTheodore Ts'o
Lockstat reports have shown that j_state_lock is a major source of lock contention, especially on systems with more than 4 CPU cores. So change it to be a read/write spinlock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: Add mount options in superblockTheodore Ts'o
Allow mount options to be stored in the superblock. Also add default mount option bits for nobarrier, block_validity, discard, and nodelalloc. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: force block allocation on quota_offDmitry Monakhov
Perform full sync procedure so that any delayed allocation blocks are allocated so quota will be consistent. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-01ext4: fix freeze deadlock under IOEric Sandeen
Commit 6b0310fbf087ad6 caused a regression resulting in deadlocks when freezing a filesystem which had active IO; the vfs_check_frozen level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing through. Duh. Changing the test to FREEZE_TRANS should let the normal freeze syncing get through the fs, but still block any transactions from starting once the fs is completely frozen. I tested this by running fsstress in the background while periodically snapshotting the fs and running fsck on the result. I ran into occasional deadlocks, but different ones. I think this is a fine fix for the problem at hand, and the other deadlocky things will need more investigation. Reported-by: Phillip Susi <psusi@cfl.rr.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-29ext4: drop inode from orphan list if ext4_delete_inode() failsTheodore Ts'o
There were some error paths in ext4_delete_inode() which was not dropping the inode from the orphan list. This could lead to a BUG_ON on umount when the orphan list is discovered to be non-empty. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: check to make make sure bd_dev is set before dereferencing itTheodore Ts'o
There are some drivers which may not set bdev->bd_dev. So make sure it is non-NULL before dereferencing it. Google-Bug-Id: 1773557 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: don't print scary messages for allocation failures post-abortEric Sandeen
I often get emails containing the "This should not happen!!" message, conveniently trimmed to remove things like: sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 03 13 c9 70 00 00 28 00 end_request: I/O error, dev sda, sector 51628400 Aborting journal on device dm-0-8. EXT4-fs error (device dm-0): ext4_journal_start_sb: Detected aborted journal EXT4-fs (dm-0): Remounting filesystem read-only I don't think there is any value to the verbosity if the reason is due to a filesystem abort; it just obfuscates the root cause. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: fix EFBIG edge case when writing to large non-extent fileToshiyuki Okajima
By running the following reproducer, we can confirm that the write system call returns with 0 when it should return the error EFBIG. #!/bin/sh /bin/dd if=/dev/zero of=./img bs=1k count=1 seek=1024k > /dev/null 2>&1 /sbin/mkfs.ext3 -Fq ./img /bin/mount -o loop -t ext4 ./img /mnt /bin/touch /mnt/file strace /bin/dd if=/dev/zero of=/mnt/file conv=notrunc bs=1k count=1 seek=$((2194719883264/1024)) 2>&1 | /bin/egrep "write.* 1024\) = " /bin/umount /mnt exit Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Eric Sandeen <sandeen@redhat.com>
2010-07-27ext4: fix ext4_get_blocks referencesEric Sandeen
ext4_get_blocks got renamed to ext4_map_blocks, but left stale comments and a prototype littered around. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Always journal quota file modificationsJan Kara
When journaled quota options are not specified, we do writes to quota files just in data=ordered mode. This actually causes warnings from JBD2 about dirty journaled buffer because ext4_getblk unconditionally treats a block allocated by it as metadata. Since quota actually is filesystem metadata, the easiest way to get rid of the warning is to always treat quota writes as metadata... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Fix potential memory leak in ext4_fill_superCyrill Gorcunov
Under heavy memory pressure we may hit out of memory situation and as result kstrdup'ed options will not be freed. Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Don't error out the fs if the user tries to make a file too bigTheodore Ts'o
If the user attempts to make a non-extent-mapped file to be too large, return EFBIG, but don't call ext4_std_err() which will end up marking the file system as containing an error. Thanks to Toshiyuki Okajima-san at Fujitsu for pointing this out. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: allocate stripe-multiple IOs on stripe boundariesEric Sandeen
For some reason, today mballoc only allocates IOs which are exactly stripe-sized on a stripe boundary. If you have a multiple (say, a 128k IO on a 64k stripe) you may end up unaligned. It seems to me that a simple change to align stripe-multiple IOs on stripe boundaries would be a very good idea, unless this breaks some other mballoc heuristic for some reason... Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: move aio completion after unwritten extent conversionjiayingz@google.com (Jiaying Zhang)
This patch is to be applied upon Christoph's "direct-io: move aio_complete into ->end_io" patch. It adds iocb and result fields to struct ext4_io_end_t, so that we can call aio_complete from ext4_end_io_nolock() after the extent conversion has finished. I have verified with Christoph's aio-dio test that used to fail after a few runs on an original kernel but now succeeds on the patched kernel. See http://thread.gmane.org/gmane.comp.file-systems.ext4/19659 for details. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27direct-io: move aio_complete into ->end_ioChristoph Hellwig
Filesystems with unwritten extent support must not complete an AIO request until the transaction to convert the extent has been commited. That means the aio_complete calls needs to be moved into the ->end_io callback so that the filesystem can control when to call it exactly. This makes a bit of a mess out of dio_complete and the ->end_io callback prototype even more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Support discard requests when running in no-journal modeJiaying Zhang
Issue discard request in ext4_free_blocks() when ext4 has no journal and is mounted with discard option. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Fix block bitmap inconsistencies after a crash when deleting filesAmir G
We have experienced bitmap inconsistencies after crash during file delete under heavy load. The crash is not file system related and I the following patch in ext4_free_branches() fixes the recovery problem. If the transaction is restarted and there is a crash before the new transaction is committed, then after recovery, the blocks that this indirect block points to have been freed, but the indirect block itself has not been freed and may still point to some of the free blocks (because of the ext4_forget()). So ext4_forget() should be called inside ext4_free_blocks() to avoid this problem. Signed-off-by: Amir Goldstein <amir73il@users.sf.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: fix potential NULL dereference while tracingTheodore Ts'o
The allocation_context pointer can be NULL. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Define s_jnl_backup_type in superblockTheodore Ts'o
This has been in use by e2fsprogs for a while; define it to keep the super block fields in sync. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Once a day, printk file system error information to dmesgTheodore Ts'o
This allows us to grab any file system error messages by scraping /var/log/messages. This will make it easy for us to do error analysis across the very large number of machines as we deploy ext4 across the fleet. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Save error information to the superblock for analysisTheodore Ts'o
Save number of file system errors, and the time function name, line number, block number, and inode number of the first and most recent errors reported on the file system in the superblock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Pass line numbers to ext4_error() and friendsTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Cleanup ext4_check_dir_entry so __func__ is now implicitTheodore Ts'o
Also start passing the line number to ext4_check_dir since we're going to need it in upcoming patch. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-26direct-io: move aio_complete into ->end_ioChristoph Hellwig
Filesystems with unwritten extent support must not complete an AIO request until the transaction to convert the extent has been commited. That means the aio_complete calls needs to be moved into the ->end_io callback so that the filesystem can control when to call it exactly. This makes a bit of a mess out of dio_complete and the ->end_io callback prototype even more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-06-29ext4: Pass line number to ext4_journal_abort_handle()Theodore Ts'o
This allows the error messages to include the line number Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Enhance ext4_grp_locked_error() to take block and function numbersTheodore Ts'o
Also use a macro definition so that __func__ and __LINE__ is implicit. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: clean up ext4_abort() so __func__ is now implicitTheodore Ts'o
Use a macro definition for ext4_abort() to clean up the .c files a wee bit. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Add new superblock fields reserved for the Next3 snapshot featureTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-16Merge branch 'master' into for-nextJiri Kosina
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-15ext4: update ctime when changing the file's permission by setfaclJan Kara
ext4 didn't update the ctime of the file when its permission was changed. Steps to reproduce: # touch aaa # stat -c %Z aaa 1275289822 # setfacl -m 'u::x,g::x,o::x' aaa # stat -c %Z aaa 1275289822 <- unchanged But, according to the spec of the ctime, ext4 must update it. Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>. CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14ext4: remove vestiges of nobh supportChristoph Hellwig
The nobh option was only supported for writeback mode, but given that all write paths actually create buffer heads it effectively was a no-op already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14ext4: remove initialized but not read variablesAndi Kleen
No real bugs found, just removed some dead code. Found by gcc 4.6's new warnings. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14ext4: Convert more i_flags references to use accessor functionsTheodore Ts'o
These changes are not ones which are likely to result in races, but they should be fixed. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-11ext4: Clean up s_dirt handlingTheodore Ts'o
We don't need to set s_dirt in most of the ext4 code when journaling is enabled. In ext3/4 some of the summary statistics for # of free inodes, blocks, and directories are calculated from the per-block group statistics when the file system is mounted or unmounted. As a result the superblock doesn't have to be updated, either via the journal or by setting s_dirt. There are a few exceptions, most notably when resizing the file system, where the superblock needs to be modified --- and in that case it should be done as a journalled operation if possible, and s_dirt set only in no-journal mode. This patch will optimize out some unneeded disk writes when using ext4 with a journal. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-05ext4: Fix remaining racy updates of EXT4_I(inode)->i_flagsDmitry Monakhov
A few functions were still modifying i_flags in a racy manner. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-02ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only filesTheodore Ts'o
Dan Roseberg has reported a problem with the MOVE_EXT ioctl. If the donor file is an append-only file, we should not allow the operation to proceed, lest we end up overwriting the contents of an append-only file. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Dan Rosenberg <dan.j.rosenberg@gmail.com>