aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-26leds: leds-pwm: return proper error if pwm_request failedAxel Lin
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ALSA: AACI: fix timeout duration ALSA: AACI: fix timeout condition checking ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode ARM: 6637/1: Make the argument to virt_to_phys() "const volatile" ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode ARM: 6635/2: Configure reference clock for Versatile Express timers ARM: versatile: name configuration options after actual board names ARM: realview: name configuration options after actual board names ARM: realview,vexpress: fix section mismatch warning for pen_release ARM: 6632/3: mmci: stop using the blockend interrupts
2011-01-26Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: mailmap: Add an entry for Axel Lin. video: fix some comments in drivers/video/console/vgacon.c drivers/video/bf537-lq035.c: Add missing IS_ERR test video: pxa168fb: remove a redundant pxa168fb_check_var call video: da8xx-fb: fix fb_probe error path video: pxa3xx-gcu: Return -EFAULT when copy_from_user() fails video: nuc900fb: properly free resources in nuc900fb_remove video: nuc900fb: fix compile error
2011-01-26Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix build of sh7750 base boards sh: update INTC to clear IRQ sense valid flag sh: Fix sh build failure when CONFIG_SFC=m sh: fix MSIOF0 SPI on ecovec: it conflicts with VOU sh: support XZ-compressed kernel. sh: Fix up breakage from asm-generic/pgtable.h changes.
2011-01-26intel_scu_ipcutils: Fix the license tagAlan Cox
GPL V2 should be GPL v2 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26intel_scu_ipc: fix signedness bugAxel Lin
busy_loop() returns negative error code, thus change err variable from u32 to int to properly propagate correct error code. Also remove unneeded initialization for err and i variables. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25rt2x00: add device id for windy31 usb deviceGreg Kroah-Hartman
This patch adds the device id for the windy31 USB device to the rt73usb driver. Thanks to Ralf Flaxa for reporting this and providing testing and a sample device. Reported-by: Ralf Flaxa <rf@suse.de> Tested-by: Ralf Flaxa <rf@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-25PM / Runtime: Don't enable interrupts while running in_interruptAlan Stern
This patch (as1445) fixes a bug in the runtime PM core left over from the addition of the no_callbacks flag. If this flag is set then it is possible for rpm_suspend() to be called in_interrupt, so when releasing spinlocks it's important not to re-enable interrupts. To avoid an unnecessary save-and-restore of the interrupt flag, the patch also inlines a pm_request_idle() call. This fixes Bugzilla #27482. (The offending code was added in 2.6.37, so it's not necessary to apply this to any earlier stable kernels.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: tim blechmann <tim@klingt.org> CC: <stable@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-01-25drm/i915: Reset crtc after resumeChris Wilson
Based on a patch by Takashi Iwai. Reported-by: Matthias Hopf <mat@mshopf.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27272 Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25drm/i915/crt: Force the initial probe after resetChris Wilson
Upon resume, like after a cold boot, we need to forcibly probe the analog connector and cannot rely on the hotplug status. Based on a patch by Takashi Iwai. Reported-by: Stefan Dirsch <sndirsch@suse.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952 Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25drm/i915: Reset state after a GPU reset or resumeChris Wilson
Call drm_mode_config_reset() after an invalidation event to restore any cached state to unknown. Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25drm: Add an interface to reset the deviceChris Wilson
Iterate over the attached CRTCs, encoders and connectors and call the supplied reset vfunc in order to reset any cached state back to unknown. Useful after an invalidation event such as a GPU reset or resuming. Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25drm/i915/sdvo: If at first we don't succeed in reading the response, waitChris Wilson
We were not pausing after detecting the response was pending and so did not allow the hardware sufficient time to complete before aborting. This lead to transient failures whilst probing SDVO devices. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30235 Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-25hwmon: (lis3) turn down the no IRQ messageKalhan Trisal
Turn down the no IRQ message - on some platforms that's a normal state of affairs. Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-24USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()Jesper Juhl
We will leak the storage allocated by request_firmware() if the size of the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE. This removes the leak by calling release_firmware() before we return -ENOSPC. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24pch_gbe: don't use flush_scheduled_work()Tejun Heo
Directly cancel adapter->reset_task instead of using to-be-deprecated flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24bnx2: Always set ETH_FLAG_TXVLANMichael Chan
TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25video: fix some comments in drivers/video/console/vgacon.cAmerigo Wang
Now vgacon_scrollback_startup() uses slab, not bootmem, the comment above it is obsolete, so does __init_refok. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25drivers/video/bf537-lq035.c: Add missing IS_ERR testJulia Lawall
lcd_device_register may return ERR_PTR, so a check is added for this value before the dereference. All of the other changes reorganize the error handling code in this function to avoid duplicating all of it in the added case. In the original code, in one case, the global variable fb_buffer was set to NULL in error code that appears after this variable is initialized. This is done now in all error handling code that has this property. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25video: pxa168fb: remove a redundant pxa168fb_check_var callaxel lin
Current implementation calls pxa168fb_check_var twice in pxa168fb_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25video: da8xx-fb: fix fb_probe error pathaxel lin
Current implementation puts CONFIG_CPU_FREQ at wrong place, CONFIG_CPU_FREQ is for lcd_da8xx_cpufreq_deregister not for unregister_framebuffer. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25drm/nvc0/grctx: correct an off-by-oneBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nv50: Fix race with PFIFO during PGRAPH context destruction.Francisco Jerez
Reported-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.Francisco Jerez
Fixes the DVI-D output on that board (fdo bug 32645). Reported-by: Bryan Quigley <BryanQuigley@Ubuntu.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nvc0: implement irq handler for whatever's at 0x14xxxxBen Skeggs
This is just barely enough to stop a never-ending IRQ storm that can be triggered by our 3D driver. We have no idea what this engine is.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nvc0: fix incorrect TPC register setupBen Skeggs
Was hitting TPC+1's regs by accident, oops. Reported-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nouveau: probe for adt7473 before f75375Ben Skeggs
There's a reported case where probing for f75375 causes the system to hang completely, in this case there's an adt7473 at the same i2c address. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25drm/nouveau: remove dead function definitionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-25Merge branch 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msm: drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-25Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq drm/i915: Prevent uninitialised reads during error state capture drm/i915: Use consistent mappings for OpRegion between ACPI and i915 drm/i915: Handle the no-interrupts case for UMS by polling drm/i915: Disable high-precision vblank timestamping for UMS drm/i915: Increase the amount of defense before computing vblank timestamps drm/i915,agp/intel: Do not clear stolen entries drm/radeon/kms: simplify atom adjust pll setup drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics drm/radeon/kms: make the mac rv630 quirk generic drm/radeon/kms: fix a spelling error in an error message drm/radeon/kms: Initialize pageflip spinlocks. drm/i915: Recognise non-VGA display devices drm/i915: Fix use of invalid array size for ring->sync_seqno drm/i915/ringbuffer: Fix use of stale HEAD position whilst polling for space drm/i915: Don't kick-off hangcheck after a DRI interrupt drm/i915: Add dependency on CONFIG_TMPFS drm/i915: Initialise ring vfuncs for old DRI paths drm/i915: make the blitter report buffer modifications to the FBC unit drm/i915: set more FBC chicken bits
2011-01-24Merge branch 'can/at91_can-for-net-2.6' of ↵David S. Miller
git://git.pengutronix.de/git/mkl/linux-2.6
2011-01-25Merge branch 'drm-intel-fixes-2' of ↵Dave Airlie
ssh://master.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes * 'drm-intel-fixes-2' of ssh://master.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: (30 commits) drm/i915: Prevent uninitialised reads during error state capture drm/i915: Use consistent mappings for OpRegion between ACPI and i915 drm/i915: Handle the no-interrupts case for UMS by polling drm/i915: Disable high-precision vblank timestamping for UMS drm/i915: Increase the amount of defense before computing vblank timestamps drm/i915,agp/intel: Do not clear stolen entries Remove MAYBE_BUILD_BUG_ON BUILD_BUG_ON: make it handle more cases module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs selinux: return -ENOMEM when memory allocation fails tpm: fix panic caused by "tpm: Autodetect itpm devices" TPM: Long default timeout fix trusted keys: Fix a memory leak in trusted_update(). keys: add trusted and encrypted maintainers encrypted-keys: rename encrypted_defined files to encrypted trusted-keys: rename trusted_defined files to trusted drm/i915: Recognise non-VGA display devices ...
2011-01-25drm/radeon/kms: add new radeon_info ioctl query for clock crystal freqAlex Deucher
Needed for timer queries in the 3D driver. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-24Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2011-01-25fix a shutdown regression in intel_idleShaohua Li
Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open broadcast clock event"). The clockevent framework can automatically shutdown broadcast timers for hotremove CPUs. And we get a shutdown regression when we shutdown broadcast timer for hot remove CPU, so just delete some code. Also fix some section mismatch. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Remove Kconfig symbol for UIE emulation RTC: Properly handle rtc_read_alarm error propagation and fix bug RTC: Propagate error handling via rtc_timer_enqueue properly acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails rtc: Cleanup removed UIE emulation declaration hrtimers: Notify hrtimer users of switches to NOHZ mode
2011-01-24drm/i915: Prevent uninitialised reads during error state captureChris Wilson
error_bo and pinned_bo could be used uninitialised if there were no active buffers. Caught by kmemcheck. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Use consistent mappings for OpRegion between ACPI and i915Michael Karcher
The opregion is a shared memory region between ACPI and the graphics driver. As the ACPI mapping has been changed to cachable in commit 6d5bbf00d251cc73223a71422d69e069dc2e0b8d, mapping the intel opregion non-cachable now fails. As no bus-master hardware is involved in the opregion, cachable map should do no harm. Tested on a Fujitsu Lifebook P8010. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> [ickle: convert to acpi_os_ioremap for consistency] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24Merge remote branch 'linus/master' into drm-intel-fixesChris Wilson
Merge with Linus to resolve conflicting fixes for the reusing the stale HEAD value during intel_ring_wait(). Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2011-01-24drm/i915: Handle the no-interrupts case for UMS by pollingChris Wilson
If the driver calls into the kernel to wait for a breadcrumb to pass, but hasn't enabled interrupts, fallback to polling the breadcrumb value. Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Disable high-precision vblank timestamping for UMSChris Wilson
We only have sufficient information for accurate (sub-frame) timestamping when the modesetting is under our control. Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915: Increase the amount of defense before computing vblank timestampsChris Wilson
Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24drm/i915,agp/intel: Do not clear stolen entriesChris Wilson
We can only utilize the stolen portion of the GTT if we are in sole charge of the hardware. This is only true if using GEM and KMS, otherwise VESA continues to access stolen memory. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-24Input: wacom - add 2 Bamboo Pen and touch modelsPing Cheng
Reported-by: David Foley <favux.is@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-24Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistentAndy Whitcroft
Currently sysrq_enabled and __sysrq_enabled are initialised separately and inconsistently, leading to sysrq being actually enabled by reported as not enabled in sysfs. The first change to the sysfs configurable synchronises these two: static int __read_mostly sysrq_enabled = 1; static int __sysrq_enabled; Add a common define to carry the default for these preventing them becoming out of sync again. Default this to 1 to mirror previous behaviour. Signed-off-by: Andy Whitcroft <apw@canonical.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-24ARM: 6632/3: mmci: stop using the blockend interruptsLinus Walleij
Implement a suggestion from Russell to drop the use of blockend interrupts altogether and instead rely on the data counter. Tested with error-free cards on U300, U8500 and RealView PB1176. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-24can: at91_can: make can_id of mailbox 0 configurableMarc Kleine-Budde
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> For the Documentation-part: Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-24can: at91_can: don't use mailbox 0Marc Kleine-Budde
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
2011-01-24can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUMMarc Kleine-Budde
This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2011-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix missing semicolons in MODULE macro usage param: add null statement to compiled-in module params module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n module: show version information for built-in modules in sysfs
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-05 18:29:11 +0000