aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/net
AgeCommit message (Collapse)Author
2011-02-02s390: Fix possibly wrong size in strncmp (smsgiucv)Stefan Weil
This error was reported by cppcheck: drivers/s390/net/smsgiucv.c:63: error: Using sizeof for array given as function argument returns the size of pointer. Although there is no runtime problem as long as sizeof(u8 *) == 8, this misleading code should get fixed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02s390: Fix wrong size in memcmp (netiucv)Stefan Weil
This error was reported by cppcheck: drivers/s390/net/netiucv.c:568: error: Using sizeof for array given as function argument returns the size of pointer. sizeof(ipuser) did not result in 16 (as many programmers would have expected) but sizeof(u8 *), so it is 4 or 8, too small here. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02qeth: allow OSA CHPARM change in suspend stateUrsula Braun
For OSA the CHPARM-definition determines the number of available outbound queues. A CHPARM-change may occur while a Linux system with probed OSA device is in suspend state. This patch enables proper resuming of an OSA device in this case. Signed-off-by: Ursula braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02qeth: allow HiperSockets framesize change in suspendUrsula Braun
For HiperSockets the framesize-definition determines the selected mtu-size and the size of the allocated qdio buffers. A framesize-change may occur while a Linux system with probed HiperSockets device is in suspend state. This patch enables proper resuming of a HiperSockets device in this case. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02qeth: add more strict MTU checkingFrank Blaschka
HiperSockets and OSA hardware report a maximum MTU size. Add checking to reject larger MTUs than allowed by hardware. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02qeth: show new mac-address if its setting failsUrsula Braun
Setting of a MAC-address may fail because an already used MAC-address is to bet set or because of authorization problems. In those cases qeth issues a message, but the mentioned MAC-address is not the new MAC-address to be set, but the actual MAC-address. This patch chooses now the new MAC-address to be set for the error messages. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
2011-01-15qeth: l3 hw tx csum circumvent hw bugFrank Blaschka
Some OSA level have a bug in the hw tx csum logic. We can circumvent this bug by turning on IP hw csum also. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15qeth: postpone open till recovery is finishedUrsula Braun
The open function of qeth is not executed if the qeth device is in state DOWN or HARDSETUP. A recovery switches from state SOFTSETUP to HARDSETUP to DOWN to HARDSETUP and back to SOFTSETUP. If open and recover are running concurrently, open fails if it hits the states HARDSETUP or DOWN. This patch inserts waiting for recovery finish in the qeth open functions to enable successful qeth device opening in spite of a running recovery. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (65 commits) [S390] prevent unneccesary loops_per_jiffy recalculation [S390] cpuinfo: use get_online_cpus() instead of preempt_disable() [S390] smp: remove cpu hotplug messages [S390] mutex: enable spinning mutex on s390 [S390] mutex: Introduce arch_mutex_cpu_relax() [S390] cio: fix ccwgroup unregistration race condition [S390] perf: add DWARF register lookup for s390 [S390] cleanup ftrace backend functions [S390] ptrace cleanup [S390] smp/idle: call init_idle() before starting a new cpu [S390] smp: delay idle task creation [S390] dasd: Correct retry counter for terminated I/O. [S390] dasd: Add support for raw ECKD access. [S390] dasd: Prevent deadlock during suspend/resume. [S390] dasd: Improve handling of stolen DASD reservation [S390] dasd: do path verification for paths added at runtime [S390] dasd: add High Performance FICON multitrack support [S390] cio: reduce memory consumption of itcw structures [S390] nmi: enable machine checks early [S390] qeth: buffer count imbalance ...
2011-01-05[S390] qeth: buffer count imbalanceJan Glauber
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] qdio: outbound tasklet scan thresholdJan Glauber
Introduce a scan treshold for the qdio outbound queues. By setting the threshold the driver can tell qdio after how much used SBALs qdio should schedule the outbound tasklet that scans the queue for finished SBALs. The threshold is specific by the drivers because a Hipersockets device is much faster in utilizing outbound buffers than a ZFCP or OSA device. The default values after how many used SBALs the tasklet should run are: OSA: > 31 SBALs Hipersockets: > 7 SBALs zfcp: > 55 SBALs Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] ctc: add support for irq statisticsHeiko Carstens
Add support for CTC I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] claw: add support for irq statisticsHeiko Carstens
Add support for CLAW I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] lcs: add support for irq statisticsHeiko Carstens
Add support for LCS I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] cleanup s390 KconfigMartin Schwidefsky
Make use of def_bool and def_tristate where possible and add sensible defaults to the config symbols where applicable. This shortens the defconfig file by another ~40 lines. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-10qeth: buffer count imbalanceJan Glauber
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: l3 add vlan hdr in passthru framesFrank Blaschka
OSA l3 mode is hw accelerated VLAN only for IPv4. Take care we add the vlan hdr to a passthru frame in the device driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: support VIPA add/del in offline modeEinar Lueck
Only work through the IP adddress to do list if the card is UP or SOFTSETUP. Enables to configure VIPA add/del in offline mode. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: support ipv6 query arp cache for HiperSocketsEinar Lueck
Function qeth_l3_arp_query now queries for IPv6 addresses, too, if QETH_QARP_WITH_IPV6 is passed as parameter to the ioctl. HiperSockets and GuestLAN in HiperSockets mode provide corresponding entries. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qeth: l3 fix len in tso hdrFrank Blaschka
The tso hdr is longer then the regular l3 hdr. Fix the calculation of the total len by accounting the size of the tso hdr. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qeth: enable interface setup if LAN is offlineUrsula Braun
Device initialization of a qeth device contains a STARTLAN step. This step may fail, if cable is not yet plugged in. The qeth device stays in state HARDSETUP until cable is plugged in. This prevents further preparational initialization steps of the qeth device and its network interface. This patch makes sure initialization of qeth device continues, even though cable is not yet plugged in. Once carrier is available, qeth is notified, triggers a recovery which results in a working network interface. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28drivers/s390/net: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qeth lcs: convert mc rwlock to RCUSachin Sant
Commit 1d7138de878d1d4210727c1200193e69596f93b3 igmp: RCU conversion of in_dev->mc_list converted rwlock to RCU. Update the s390 network drivers(qeth & lcs) code to adapt to this change. V2 : Changes based on suggestions given by Eric Dumazet Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08qeth: fix race condition during device startupFrank Blaschka
QDIO is running independent from netdevice state. We are not allowed to schedule NAPI in case the netdevice is not open. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08qeth: remove dev_queue_xmit invocationUrsula Braun
For a certain Hipersockets specific error code in the xmit path, the qeth driver tries to invoke dev_queue_xmit again. Commit 79640a4ca6955e3ebdb7038508fa7a0cd7fa5527 introduces a busylock causing locking problems in case of re-invoked dev_queue_xmit by qeth. This patch removes the attempts to retry packet sending with dev_queue_xmit from the qeth driver. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13s390: ctcm_mpc: Fix build after netdev refcount changes.David S. Miller
Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-03qeth: tagging with VLAN-ID 0Ursula Braun
This patch adapts qeth to handle tagged frames with VLAN-ID 0 and with or without priority information in the tag. It enables qeth to receive priority-tagged frames on a base interface, for example from z/OS, without configuring an additional VLAN interface. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
2010-09-26s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: NAPI support for l2 and l3 disciplineFrank Blaschka
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08Kconfig: have CCWGROUP depend on CLAWMike Frysinger
Since the claw code calls ccwgroup_remove_ccwdev(), we need to make sure CCWGROUP is enabled when CLAW is enabled. Otherwise we hit fun undefined references at build time: ERROR: "ccwgroup_remove_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_probe_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_register" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_unregister" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_create_from_string" [drivers/s390/net/claw.ko] undefined! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: Use %pI6Joe Perches
Format an ipv6 address using vsprintf extensions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-12ctcm: rename READ/WRITE defines to avoid redefinitionsUrsula Braun
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-12claw: rename READ/WRITE defines to avoid redefinitionsHeiko Carstens
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-09[S390] cmm, smsgiucv_app: convert sender to uppercaseHendrik Brueckner
The sender kernel parameter contains a z/VM user ID where alphabetic characters must be specified in uppercase. Allow users to specify lowercase characters and convert the sender string to uppercase at module initialization. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-23qeth: avoid useless removal of multicast addressesUrsula Braun
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Use memdup_user when user data is immediately copied into the ↵Julia Lawall
allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: return zero from reply callback functionsUrsula Braun
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid loop if ipa command response is missingUrsula Braun
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Clear mac_bits field when switching between Layer 2 and Layer 3Carsten Otte
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: handle missing z/VM authorization of OSXUrsula Braun
For z/VM guest operating systems, OSX CHPIDs can only be used, if LPAR and z/VM userID are explicitly authorized through the Service Element. Issue a message if this SE-authorization is missing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>