aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/mlx4
AgeCommit message (Collapse)Author
2011-01-28mlx4_core: Add ConnectX-3 device IDsYevgeny Petrilin
...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-12IB/mlx4: Handle protocol field in multicast tableAleksey Senin
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits) cxgb4vf: recover from failure in cxgb4vf_open() netfilter: ebtables: make broute table work again netfilter: fix race in conntrack between dump_table and destroy ah: reload pointers to skb data after calling skb_cow_data() ah: update maximum truncated ICV length xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC ehea: Increase the skb array usage net/fec: remove config FEC2 as it's used nowhere pcnet_cs: add new_id tcp: disallow bind() to reuse addr/port net/r8169: Update the function of parsing firmware net: ppp: use {get,put}_unaligned_be{16,32} CAIF: Fix IPv6 support in receive path for GPRS/3G arp: allow to invalidate specific ARP entries net_sched: factorize qdisc stats handling mlx4: Call alloc_etherdev to allocate RX and TX queues net: Add alloc_netdev_mqs function caif: don't set connection request param size before copying data cxgb4vf: fix mailbox data/control coherency domain race qlcnic: change module parameter permissions ...
2011-01-10mlx4_core: Avoid vunmap() of invalid pointer if allocation failsAli Ayoub
Signed-off-by: Ali Ayoub <ali@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4_core: Remove warning message about firmware bugRoland Dreier
The kernel warning message added in commit 58d74bb1d9f7 ("mlx4_core: Workaround firmware bug in query dev cap") about mlx4 reporting the wrong number of "blue flame registers" doesn't really help anyone, since the firmware bug is known and fixed and the bug is pretty much harmless to users. So just get rid of the warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4: Call alloc_etherdev to allocate RX and TX queuesTom Herbert
Changed driver to call alloc_etherdev_mqs so that the number of TX and RX queues can be set to correct values in the netdev device. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix information leak in marshalling code IB/pack: Remove some unused code added by the IBoE patches IB/mlx4: Fix IBoE link state IB/mlx4: Fix IBoE reported link rate mlx4_core: Workaround firmware bug in query dev cap IB/mlx4: Fix memory ordering of VLAN insertion control bits MAINTAINERS: Update NetEffect entry
2010-12-01mlx4_core: Workaround firmware bug in query dev capEli Cohen
ConnectX firmware is supposed to report the number blue flame registers per page as log2 of the value. However, due to a firmware bug, it reports actual number. This patch works around this by checking if the number of registers calculated fits within a page. If it does not, we use 8 registers per page. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) ehea: Fixing statistics bonding: Fix lockdep warning after bond_vlan_rx_register() tunnels: Fix tunnels change rcu protection caif-u5500: Build config for CAIF shared mem driver caif-u5500: CAIF shared memory mailbox interface caif-u5500: CAIF shared memory transport protocol caif-u5500: Adding shared memory include drivers/isdn: delete double assignment drivers/net/typhoon.c: delete double assignment drivers/net/sb1000.c: delete double assignment qlcnic: define valid vlan id range qlcnic: reduce rx ring size qlcnic: fix mac learning ehea: fix use after free inetpeer: __rcu annotations fib_rules: __rcu annotates ctarget tunnels: add __rcu annotations net: add __rcu annotations to protocol ipv4: add __rcu annotations to routes.c qlge: bugfix: Restoring the vlan setting. ...
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-10-26Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier
'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25IB/mlx4: Add VLAN support for IBoEEli Cohen
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_en: Change multicast promiscuous mode to support IBoEEli Cohen
Change multicast promiscuous mode to pass packets through the multicast group distribution table before sending packets that miss to the default multicast QP. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Update data structures and constants for IBoEEli Cohen
Add fields to hardware data structures and add new constants required for IBoE support. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25mlx4_core: Allow protocol drivers to find corresponding interfacesEli Cohen
Add a mechanism for mlx4 protocol drivers to get a pointer to other drivers's device objects. For this, an exported function, mlx4_get_protocol_dev() is added, which allows a driver to get some other driver's device based on the protocol that the driver implements. Two protocols are added: MLX4_PROTOCOL_IB and MLX4_PROTOCOL_EN. This will be used in mlx4 IBoE support so that mlx4_ib can find the corresponding mlx4_en netdev. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and rename a few things. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24mlx4: make functions local and remove dead code.stephen hemminger
Make the following function static: mlx4_UNMAP_ICM Remove the following unused function: mlx4_MAP_ICM_page Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28mlx4_core: Allow log_mtts_per_seg up to 7Eli Cohen
As there are now machines with a lot more physical memory, we need to be able to register more memory. This patch lifts the upper limit of log_mtts_per_seg from 5 to 7, increasing the amount of memory that can be registered. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-27mlx4_en: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26drivers/net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Fixed Ethtool statistics reportYevgeny Petrilin
The values didn't match the title after removing the LRO statistics in commit fa37a9586f92051de03a13e55e5ec3880bb6783e Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Consider napi_get_frags() failure.Yevgeny Petrilin
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-28mlx4: use bitmap libraryAkinobu Mita
Replace loops calling set_bit() and clear_bit() with bitmap_set() and bitmap_clear(). Unlike loops calling set_bit() and clear_bit(), bitmap_set() and bitmap_clear() are not atomic. But this is ok. Because the bitmap operations are protected by bitmap->lock except for initialization of the bitmap in mlx4_bitmap_init(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fix build warning in mlx4_en_create_rx_ring.David S. Miller
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: updated driver versionYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Moving to work with GROYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: reconfiguring mac address.Yevgeny Petrilin
When Mac address is removed from one port of the CX2 device, the other device should reconfigure its Mac. This fixes an issue with failover, when both ports have the same Mac address, and one of the ports, is closed, the second one stops receiving traffic. (bugzilla #1965 at bugs.openfabrics.org) Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: get/set ringsize uses actual ring sizeYevgeny Petrilin
In case that the rings were not fully filled, the report in Ethtool should be according to the actual size that was filled. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Added self diagnostics test implementationYevgeny Petrilin
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Validate port up prior to transmittingYevgeny Petrilin
We might try to use resources which were not activated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Reporting link state with KERN_INFOYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed MAX_TX_RINGS definitionYevgeny Petrilin
Defined as sum of default number of TX rings and number of rings used for priority flow control mode. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: performing CLOSE_PORT at the end of tear-down processYevgeny Petrilin
All port's resources should be closed before we give the CLOSE_PORT command to the firmware. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting dev->perm_addr fieldYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting actual RX ring sizeYevgeny Petrilin
When configuring HW resources, the RX ring size that is passed should be the actual size that depends on number of buffers that we succeeded to allocate. The mask for ring size should also be configured accordingly Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed incorrect unmapping on RX flow.Yevgeny Petrilin
When allocating new fragments to replace the ones that would be passed to the stack, The fragments that should be replaced, are the ones that were already used. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22mlx4: remove num_lro parameterAmerigo Wang
As suggested by David, this parameter can die, we can use ethtool to turn LRO on/off. Compile tests only. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17drivers/net: Convert unbounded kzalloc calls to kcallocJoe Perches
These changes may be slightly safer in some instances. There are other kzalloc calls with a multiply, but those calls are typically "small fixed #" * sizeof(some pointer)" and those are not converted. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15drivers/net/mlx4: Use %pV, pr_<level>, printk_onceJoe Perches
Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28mlx4: add dynamic LRO disable supportAmerigo Wang
This patch adds dynamic LRO diable support for mlx4 net driver. It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx path without rtnl lock. (I don't have mlx4 card, so only did compiling test. Anyone who wants to test this is more than welcome.) This is based on Neil's initial work too, and heavily modified based on Stanislaw's suggestions. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Neil Horman <nhorman@redhat.com> Acked-by: Neil Horman <nhorman@redhat.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03drivers/net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31mlx4_en: use net_device dev_id to indicate port numberEli Cohen
Today, there are no means to know which port of a hardware device a netdev interface uses. struct net_device conatins a field, dev_id, that can be used for that. Use this field to save the port number in ConnectX that is being used by the net device; port numbers are zero based. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix incorrect unlock in nes_process_mac_intr() RDMA/nes: Async event for closed QP causes crash RDMA/nes: Have ethtool read hardware registers for rx/tx stats RDMA/cxgb4: Only insert sq qid in lookup table RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode RDMA/cxgb4: Set fence flag for inv-local-stag work requests RDMA/cxgb4: Update some HW limits RDMA/cxgb4: Don't limit fastreg page list depth RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation RDMA/cxgb4: Fix overflow bug in CQ arm RDMA/cxgb4: Optimize CQ overflow detection RDMA/cxgb4: CQ size must be IQ size - 2 RDMA/cxgb4: Register RDMA provider based on LLD state_change events RDMA/cxgb4: Detach from the LLD after unregistering RDMA device IB/ipath: Remove support for QLogic PCIe QLE devices IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static IB/core: Allow device-specific per-port sysfs files mlx4_core: Clean up mlx4_alloc_icm() a bit mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
2010-05-21drivers/base: Convert dev->sem to mutexThomas Gleixner
The semaphore is semantically a mutex. Convert it to a real mutex and fix up a few places where code was relying on semaphore.h to be included by device.h, as well as the users of the trylock function, as that value is now reversed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20mlx4_core: Clean up mlx4_alloc_icm() a bitRoland Dreier
Handle the allocation error case first, so that we don't have further nested if for handling the common case of success. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-20mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()Sebastien Dugue
If the number of sg entries in the ICM chunk reaches MLX4_ICM_CHUNK_LEN, we must set chunk to NULL even for coherent mappings so that the next time through the loop will allocate another chunk. Otherwise we'll overflow the sg list the next time through the loop. This will lead to memory corruption if this case is hit. mthca does not have this bug. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>