1 files changed, 190 insertions, 196 deletions

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1dcda887cef..078a49e8593 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -223,9 +223,7 @@ static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
  * the XAUI.
  */
 
-#define SWITCH_SIGN	0xA5A5A5A5A5A5A5A5ULL
 #define	END_SIGN	0x0
-
 static const u64 herc_act_dtx_cfg[] = {
 	/* Set address */
 	0x8000051536750000ULL, 0x80000515367500E0ULL,
@@ -247,37 +245,19 @@ static const u64 herc_act_dtx_cfg[] = {
 	END_SIGN
 };
 
-static const u64 xena_mdio_cfg[] = {
-	/* Reset PMA PLL */
-	0xC001010000000000ULL, 0xC0010100000000E0ULL,
-	0xC0010100008000E4ULL,
-	/* Remove Reset from PMA PLL */
-	0xC001010000000000ULL, 0xC0010100000000E0ULL,
-	0xC0010100000000E4ULL,
-	END_SIGN
-};
-
 static const u64 xena_dtx_cfg[] = {
+	/* Set address */
 	0x8000051500000000ULL, 0x80000515000000E0ULL,
-	0x80000515D93500E4ULL, 0x8001051500000000ULL,
-	0x80010515000000E0ULL, 0x80010515001E00E4ULL,
-	0x8002051500000000ULL, 0x80020515000000E0ULL,
-	0x80020515F21000E4ULL,
-	/* Set PADLOOPBACKN */
-	0x8002051500000000ULL, 0x80020515000000E0ULL,
-	0x80020515B20000E4ULL, 0x8003051500000000ULL,
-	0x80030515000000E0ULL, 0x80030515B20000E4ULL,
-	0x8004051500000000ULL, 0x80040515000000E0ULL,
-	0x80040515B20000E4ULL, 0x8005051500000000ULL,
-	0x80050515000000E0ULL, 0x80050515B20000E4ULL,
-	SWITCH_SIGN,
-	/* Remove PADLOOPBACKN */
+	/* Write data */
+	0x80000515D9350004ULL, 0x80000515D93500E4ULL,
+	/* Set address */
+	0x8001051500000000ULL, 0x80010515000000E0ULL,
+	/* Write data */
+	0x80010515001E0004ULL, 0x80010515001E00E4ULL,
+	/* Set address */
 	0x8002051500000000ULL, 0x80020515000000E0ULL,
-	0x80020515F20000E4ULL, 0x8003051500000000ULL,
-	0x80030515000000E0ULL, 0x80030515F20000E4ULL,
-	0x8004051500000000ULL, 0x80040515000000E0ULL,
-	0x80040515F20000E4ULL, 0x8005051500000000ULL,
-	0x80050515000000E0ULL, 0x80050515F20000E4ULL,
+	/* Write data */
+	0x80020515F2100004ULL, 0x80020515F21000E4ULL,
 	END_SIGN
 };
 
@@ -552,11 +532,6 @@ static int init_shared_mem(struct s2io_nic *nic)
 					rx_blocks->block_dma_addr +
 					(rxd_size[nic->rxd_mode] * l);
 			}
-
-			mac_control->rings[i].rx_blocks[j].block_virt_addr =
-				tmp_v_addr;
-			mac_control->rings[i].rx_blocks[j].block_dma_addr =
-				tmp_p_addr;
 		}
 		/* Interlinking all Rx Blocks */
 		for (j = 0; j < blk_cnt; j++) {
@@ -775,7 +750,21 @@ static int s2io_verify_pci_mode(nic_t *nic)
 	return mode;
 }
 
+#define NEC_VENID   0x1033
+#define NEC_DEVID   0x0125
+static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
+{
+	struct pci_dev *tdev = NULL;
+	while ((tdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
+		if ((tdev->vendor == NEC_VENID) && (tdev->device == NEC_DEVID)){
+			if (tdev->bus == s2io_pdev->bus->parent)
+				return 1;
+		}
+	}
+	return 0;
+}
 
+int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
 /**
  * s2io_print_pci_mode -
  */
@@ -792,6 +781,14 @@ static int s2io_print_pci_mode(nic_t *nic)
 	if ( val64 & PCI_MODE_UNKNOWN_MODE)
 		return -1;	/* Unknown PCI mode */
 
+	config->bus_speed = bus_speed[mode];
+
+	if (s2io_on_nec_bridge(nic->pdev)) {
+		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
+							nic->dev->name);
+		return mode;
+	}
+
 	if (val64 & PCI_MODE_32_BITS) {
 		DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
 	} else {
@@ -801,35 +798,27 @@ static int s2io_print_pci_mode(nic_t *nic)
 	switch(mode) {
 		case PCI_MODE_PCI_33:
 			DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
-			config->bus_speed = 33;
 			break;
 		case PCI_MODE_PCI_66:
 			DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
-			config->bus_speed = 133;
 			break;
 		case PCI_MODE_PCIX_M1_66:
 			DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
-			config->bus_speed = 133; /* Herc doubles the clock rate */
 			break;
 		case PCI_MODE_PCIX_M1_100:
 			DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
-			config->bus_speed = 200;
 			break;
 		case PCI_MODE_PCIX_M1_133:
 			DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
-			config->bus_speed = 266;
 			break;
 		case PCI_MODE_PCIX_M2_66:
 			DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
-			config->bus_speed = 133;
 			break;
 		case PCI_MODE_PCIX_M2_100:
 			DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
-			config->bus_speed = 200;
 			break;
 		case PCI_MODE_PCIX_M2_133:
 			DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
-			config->bus_speed = 266;
 			break;
 		default:
 			return -1;	/* Unsupported bus speed */
@@ -857,7 +846,7 @@ static int init_nic(struct s2io_nic *nic)
 	int i, j;
 	mac_info_t *mac_control;
 	struct config_param *config;
-	int mdio_cnt = 0, dtx_cnt = 0;
+	int dtx_cnt = 0;
 	unsigned long long mem_share;
 	int mem_size;
 
@@ -904,20 +893,6 @@ static int init_nic(struct s2io_nic *nic)
 	val64 = dev->mtu;
 	writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
 
-	/*
-	 * Configuring the XAUI Interface of Xena.
-	 * ***************************************
-	 * To Configure the Xena's XAUI, one has to write a series
-	 * of 64 bit values into two registers in a particular
-	 * sequence. Hence a macro 'SWITCH_SIGN' has been defined
-	 * which will be defined in the array of configuration values
-	 * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places
-	 * to switch writing from one regsiter to another. We continue
-	 * writing these values until we encounter the 'END_SIGN' macro.
-	 * For example, After making a series of 21 writes into
-	 * dtx_control register the 'SWITCH_SIGN' appears and hence we
-	 * start writing into mdio_control until we encounter END_SIGN.
-	 */
 	if (nic->device_type & XFRAME_II_DEVICE) {
 		while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
 			SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
@@ -927,35 +902,11 @@ static int init_nic(struct s2io_nic *nic)
 			dtx_cnt++;
 		}
 	} else {
-		while (1) {
-		      dtx_cfg:
-			while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
-				if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
-					dtx_cnt++;
-					goto mdio_cfg;
-				}
-				SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
-						  &bar0->dtx_control, UF);
-				val64 = readq(&bar0->dtx_control);
-				dtx_cnt++;
-			}
-		      mdio_cfg:
-			while (xena_mdio_cfg[mdio_cnt] != END_SIGN) {
-				if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
-					mdio_cnt++;
-					goto dtx_cfg;
-				}
-				SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt],
-						  &bar0->mdio_control, UF);
-				val64 = readq(&bar0->mdio_control);
-				mdio_cnt++;
-			}
-			if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) &&
-			    (xena_mdio_cfg[mdio_cnt] == END_SIGN)) {
-				break;
-			} else {
-				goto dtx_cfg;
-			}
+		while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
+			SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
+					  &bar0->dtx_control, UF);
+			val64 = readq(&bar0->dtx_control);
+			dtx_cnt++;
 		}
 	}
 
@@ -1565,11 +1516,9 @@ static int init_nic(struct s2io_nic *nic)
 		val64 &= ~(BIT(13)|BIT(14)|BIT(15));
 		writeq(val64, &bar0->pic_control2);
 	}
-
-	/* Setting Link stability period to 64 ms */ 
-	if (nic->device_type == XFRAME_II_DEVICE) {
-		val64 = MISC_LINK_STABILITY_PRD(3);
-		writeq(val64, &bar0->misc_control);
+	if (strstr(nic->product_name, "CX4")) {
+		val64 = TMAC_AVG_IPG(0x17);
+		writeq(val64, &bar0->tmac_avg_ipg);
 	}
 
 	return SUCCESS;
@@ -2034,6 +1983,13 @@ static int start_nic(struct s2io_nic *nic)
 	val64 |= ADAPTER_EOI_TX_ON;
 	writeq(val64, &bar0->adapter_control);
 
+	if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+		/*
+		 * Dont see link state interrupts initally on some switches,
+		 * so directly scheduling the link state task here.
+		 */
+		schedule_work(&nic->set_link_task);
+	}
 	/* SXE-002: Initialize link and activity LED */
 	subid = nic->pdev->subsystem_device;
 	if (((subid & 0xFF) >= 0x07) &&
@@ -2045,12 +2001,6 @@ static int start_nic(struct s2io_nic *nic)
 		writeq(val64, (void __iomem *)bar0 + 0x2700);
 	}
 
-	/*
-	 * Don't see link state interrupts on certain switches, so
-	 * directly scheduling a link state task from here.
-	 */
-	schedule_work(&nic->set_link_task);
-
 	return SUCCESS;
 }
 /**
@@ -2569,7 +2519,8 @@ static int s2io_poll(struct net_device *dev, int *budget)
 		}
 	}
 	/* Re enable the Rx interrupts. */
-	en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
+	writeq(0x0, &bar0->rx_traffic_mask);
+	val64 = readl(&bar0->rx_traffic_mask);
 	atomic_dec(&nic->isr_cnt);
 	return 0;
 
@@ -2881,23 +2832,26 @@ static void alarm_intr_handler(struct s2io_nic *nic)
  *   SUCCESS on success and FAILURE on failure.
  */
 
-static int wait_for_cmd_complete(nic_t * sp)
+static int wait_for_cmd_complete(void *addr, u64 busy_bit)
 {
-	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	int ret = FAILURE, cnt = 0;
 	u64 val64;
 
 	while (TRUE) {
-		val64 = readq(&bar0->rmac_addr_cmd_mem);
-		if (!(val64 & RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
+		val64 = readq(addr);
+		if (!(val64 & busy_bit)) {
 			ret = SUCCESS;
 			break;
 		}
-		msleep(50);
+
+		if(in_interrupt())
+			mdelay(50);
+		else
+			msleep(50);
+
 		if (cnt++ > 10)
 			break;
 	}
-
 	return ret;
 }
 
@@ -2936,6 +2890,9 @@ static void s2io_reset(nic_t * sp)
 	 * PCI write to sw_reset register is done by this time.
 	 */
 	msleep(250);
+	if (strstr(sp->product_name, "CX4")) {
+		msleep(750);
+	}
 
 	/* Restore the PCI state saved during initialization. */
 	pci_restore_state(sp->pdev);
@@ -3154,7 +3111,7 @@ static void restore_xmsi_data(nic_t *nic)
 	u64 val64;
 	int i;
 
-	for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+	for (i=0; i< nic->avail_msix_vectors; i++) {
 		writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
 		writeq(nic->msix_info[i].data, &bar0->xmsi_data);
 		val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
@@ -3173,7 +3130,7 @@ static void store_xmsi_data(nic_t *nic)
 	int i;
 
 	/* Store and display */
-	for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+	for (i=0; i< nic->avail_msix_vectors; i++) {
 		val64 = (BIT(15) | vBIT(i, 26, 6));
 		writeq(val64, &bar0->xmsi_access);
 		if (wait_for_msix_trans(nic, i)) {
@@ -3301,15 +3258,24 @@ static int s2io_enable_msi_x(nic_t *nic)
 		writeq(tx_mat, &bar0->tx_mat0_n[7]);
 	}
 
+	nic->avail_msix_vectors = 0;
 	ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+	/* We fail init if error or we get less vectors than min required */
+	if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
+		nic->avail_msix_vectors = ret;
+		ret = pci_enable_msix(nic->pdev, nic->entries, ret);
+	}
 	if (ret) {
 		DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
 		kfree(nic->entries);
 		kfree(nic->s2io_entries);
 		nic->entries = NULL;
 		nic->s2io_entries = NULL;
+		nic->avail_msix_vectors = 0;
 		return -ENOMEM;
 	}
+	if (!nic->avail_msix_vectors)
+		nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
 
 	/*
 	 * To enable MSI-X, MSI also needs to be enabled, due to a bug
@@ -3342,8 +3308,6 @@ static int s2io_open(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	int err = 0;
-	int i;
-	u16 msi_control; /* Temp variable */
 
 	/*
 	 * Make sure you have link off by default every time
@@ -3353,11 +3317,14 @@ static int s2io_open(struct net_device *dev)
 	sp->last_link_state = 0;
 
 	/* Initialize H/W and enable interrupts */
-	if (s2io_card_up(sp)) {
+	err = s2io_card_up(sp);
+	if (err) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
-		err = -ENODEV;
-		goto hw_init_failed;
+		if (err == -ENODEV)
+			goto hw_init_failed;
+		else
+			goto hw_enable_failed;
 	}
 
 	/* Store the values of the MSIX table in the nic_t structure */
@@ -3374,6 +3341,8 @@ failed\n", dev->name);
 		}
 	}
 	if (sp->intr_type == MSI_X) {
+		int i;
+
 		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
 			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
 				sprintf(sp->desc1, "%s:MSI-X-%d-TX",
@@ -3426,24 +3395,25 @@ setting_mac_address_failed:
 isr_registration_failed:
 	del_timer_sync(&sp->alarm_timer);
 	if (sp->intr_type == MSI_X) {
-		if (sp->device_type == XFRAME_II_DEVICE) {
-			for (i=1; (sp->s2io_entries[i].in_use == 
+		int i;
+		u16 msi_control; /* Temp variable */
+		for (i=1; (sp->s2io_entries[i].in_use == 
 				MSIX_REGISTERED_SUCCESS); i++) {
-				int vector = sp->entries[i].vector;
-				void *arg = sp->s2io_entries[i].arg;
-
-				free_irq(vector, arg);
-			}
-			pci_disable_msix(sp->pdev);
+			int vector = sp->entries[i].vector;
+			void *arg = sp->s2io_entries[i].arg;
 
-			/* Temp */
-			pci_read_config_word(sp->pdev, 0x42, &msi_control);
-			msi_control &= 0xFFFE; /* Disable MSI */
-			pci_write_config_word(sp->pdev, 0x42, msi_control);
+			free_irq(vector, arg);
 		}
+		pci_disable_msix(sp->pdev);
+
+		/* Temp */
+		pci_read_config_word(sp->pdev, 0x42, &msi_control);
+		msi_control &= 0xFFFE; /* Disable MSI */
+		pci_write_config_word(sp->pdev, 0x42, msi_control);
 	}
 	else if (sp->intr_type == MSI)
 		pci_disable_msi(sp->pdev);
+hw_enable_failed:
 	s2io_reset(sp);
 hw_init_failed:
 	if (sp->intr_type == MSI_X) {
@@ -3471,35 +3441,12 @@ hw_init_failed:
 static int s2io_close(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
-	int i;
-	u16 msi_control;
 
 	flush_scheduled_work();
 	netif_stop_queue(dev);
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
-	s2io_card_down(sp);
-
-	if (sp->intr_type == MSI_X) {
-		if (sp->device_type == XFRAME_II_DEVICE) {
-			for (i=1; (sp->s2io_entries[i].in_use == 
-					MSIX_REGISTERED_SUCCESS); i++) {
-				int vector = sp->entries[i].vector;
-				void *arg = sp->s2io_entries[i].arg;
-
-				free_irq(vector, arg);
-			}
-			pci_read_config_word(sp->pdev, 0x42, &msi_control);
-			msi_control &= 0xFFFE; /* Disable MSI */
-			pci_write_config_word(sp->pdev, 0x42, msi_control);
+	s2io_card_down(sp, 1);
 
-			pci_disable_msix(sp->pdev);
-		}
-	}
-	else {
-		free_irq(sp->pdev->irq, dev);
-		if (sp->intr_type == MSI)
-			pci_disable_msi(sp->pdev);
-	}	
 	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
 }
@@ -3825,41 +3772,56 @@ static void s2io_txpic_intr_handle(nic_t *sp)
 		val64 = readq(&bar0->gpio_int_reg);
 		if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
 		    (val64 & GPIO_INT_REG_LINK_UP)) {
+			/*
+			 * This is unstable state so clear both up/down
+			 * interrupt and adapter to re-evaluate the link state.
+			 */
 			val64 |=  GPIO_INT_REG_LINK_DOWN;
 			val64 |= GPIO_INT_REG_LINK_UP;
 			writeq(val64, &bar0->gpio_int_reg);
-			goto masking;
-		}
-
-		if (((sp->last_link_state == LINK_UP) &&
-			(val64 & GPIO_INT_REG_LINK_DOWN)) ||
-		((sp->last_link_state == LINK_DOWN) &&
-		(val64 & GPIO_INT_REG_LINK_UP))) {
 			val64 = readq(&bar0->gpio_int_mask);
-			val64 |=  GPIO_INT_MASK_LINK_DOWN;
-			val64 |= GPIO_INT_MASK_LINK_UP;
+			val64 &= ~(GPIO_INT_MASK_LINK_UP |
+				   GPIO_INT_MASK_LINK_DOWN);
 			writeq(val64, &bar0->gpio_int_mask);
-			s2io_set_link((unsigned long)sp);
 		}
-masking:
-		if (sp->last_link_state == LINK_UP) {
-			/*enable down interrupt */
-			val64 = readq(&bar0->gpio_int_mask);
-			/* unmasks link down intr */
-			val64 &=  ~GPIO_INT_MASK_LINK_DOWN;
-			/* masks link up intr */
-			val64 |= GPIO_INT_MASK_LINK_UP;
-			writeq(val64, &bar0->gpio_int_mask);
-		} else {
-			/*enable UP Interrupt */
-			val64 = readq(&bar0->gpio_int_mask);
-			/* unmasks link up interrupt */
-			val64 &= ~GPIO_INT_MASK_LINK_UP;
-			/* masks link down interrupt */
-			val64 |=  GPIO_INT_MASK_LINK_DOWN;
-			writeq(val64, &bar0->gpio_int_mask);
+		else if (val64 & GPIO_INT_REG_LINK_UP) {
+			val64 = readq(&bar0->adapter_status);
+			if (verify_xena_quiescence(sp, val64,
+						   sp->device_enabled_once)) {
+				/* Enable Adapter */
+				val64 = readq(&bar0->adapter_control);
+				val64 |= ADAPTER_CNTL_EN;
+				writeq(val64, &bar0->adapter_control);
+				val64 |= ADAPTER_LED_ON;
+				writeq(val64, &bar0->adapter_control);
+				if (!sp->device_enabled_once)
+					sp->device_enabled_once = 1;
+
+				s2io_link(sp, LINK_UP);
+				/*
+				 * unmask link down interrupt and mask link-up
+				 * intr
+				 */
+				val64 = readq(&bar0->gpio_int_mask);
+				val64 &= ~GPIO_INT_MASK_LINK_DOWN;
+				val64 |= GPIO_INT_MASK_LINK_UP;
+				writeq(val64, &bar0->gpio_int_mask);
+
+			}
+		}else if (val64 & GPIO_INT_REG_LINK_DOWN) {
+			val64 = readq(&bar0->adapter_status);
+			if (verify_xena_quiescence(sp, val64,
+						   sp->device_enabled_once)) {
+				s2io_link(sp, LINK_DOWN);
+				/* Link is down so unmaks link up interrupt */
+				val64 = readq(&bar0->gpio_int_mask);
+				val64 &= ~GPIO_INT_MASK_LINK_UP;
+				val64 |= GPIO_INT_MASK_LINK_DOWN;
+				writeq(val64, &bar0->gpio_int_mask);
+			}
 		}
 	}
+	val64 = readq(&bar0->gpio_int_mask);
 }
 
 /**
@@ -4080,7 +4042,8 @@ static void s2io_set_multicast(struct net_device *dev)
 		    RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
 		writeq(val64, &bar0->rmac_addr_cmd_mem);
 		/* Wait till command completes */
-		wait_for_cmd_complete(sp);
+		wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+				      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
 
 		sp->m_cast_flg = 1;
 		sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
@@ -4095,7 +4058,8 @@ static void s2io_set_multicast(struct net_device *dev)
 		    RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
 		writeq(val64, &bar0->rmac_addr_cmd_mem);
 		/* Wait till command completes */
-		wait_for_cmd_complete(sp);
+		wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+				      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
 
 		sp->m_cast_flg = 0;
 		sp->all_multi_pos = 0;
@@ -4160,7 +4124,8 @@ static void s2io_set_multicast(struct net_device *dev)
 			writeq(val64, &bar0->rmac_addr_cmd_mem);
 
 			/* Wait for command completes */
-			if (wait_for_cmd_complete(sp)) {
+			if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+				      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
 				DBG_PRINT(ERR_DBG, "%s: Adding ",
 					  dev->name);
 				DBG_PRINT(ERR_DBG, "Multicasts failed\n");
@@ -4190,7 +4155,8 @@ static void s2io_set_multicast(struct net_device *dev)
 			writeq(val64, &bar0->rmac_addr_cmd_mem);
 
 			/* Wait for command completes */
-			if (wait_for_cmd_complete(sp)) {
+			if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+				      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
 				DBG_PRINT(ERR_DBG, "%s: Adding ",
 					  dev->name);
 				DBG_PRINT(ERR_DBG, "Multicasts failed\n");
@@ -4235,7 +4201,8 @@ static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
 	    RMAC_ADDR_CMD_MEM_OFFSET(0);
 	writeq(val64, &bar0->rmac_addr_cmd_mem);
 	/* Wait till command completes */
-	if (wait_for_cmd_complete(sp)) {
+	if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+		      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
 		DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
 		return FAILURE;
 	}
@@ -4632,7 +4599,6 @@ static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
 	}
 	return ret;
 }
-
 static void s2io_vpd_read(nic_t *nic)
 {
 	u8 vpd_data[256],data;
@@ -4983,8 +4949,10 @@ static int s2io_link_test(nic_t * sp, uint64_t * data)
 	u64 val64;
 
 	val64 = readq(&bar0->adapter_status);
-	if (val64 & ADAPTER_STATUS_RMAC_LOCAL_FAULT)
+	if(!(LINK_IS_UP(val64)))
 		*data = 1;
+	else
+		*data = 0;
 
 	return 0;
 }
@@ -5403,7 +5371,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
 
 	dev->mtu = new_mtu;
 	if (netif_running(dev)) {
-		s2io_card_down(sp);
+		s2io_card_down(sp, 0);
 		netif_stop_queue(dev);
 		if (s2io_card_up(sp)) {
 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
@@ -5541,12 +5509,13 @@ static void s2io_set_link(unsigned long data)
 	clear_bit(0, &(nic->link_state));
 }
 
-static void s2io_card_down(nic_t * sp)
+static void s2io_card_down(nic_t * sp, int flag)
 {
 	int cnt = 0;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	unsigned long flags;
 	register u64 val64 = 0;
+	struct net_device *dev = sp->dev;
 
 	del_timer_sync(&sp->alarm_timer);
 	/* If s2io_set_link task is executing, wait till it completes. */
@@ -5557,6 +5526,36 @@ static void s2io_card_down(nic_t * sp)
 
 	/* disable Tx and Rx traffic on the NIC */
 	stop_nic(sp);
+	if (flag) {
+		if (sp->intr_type == MSI_X) {
+			int i;
+			u16 msi_control;
+
+			for (i=1; (sp->s2io_entries[i].in_use ==
+				MSIX_REGISTERED_SUCCESS); i++) {
+				int vector = sp->entries[i].vector;
+				void *arg = sp->s2io_entries[i].arg;
+
+				free_irq(vector, arg);
+			}
+			pci_read_config_word(sp->pdev, 0x42, &msi_control);
+			msi_control &= 0xFFFE; /* Disable MSI */
+			pci_write_config_word(sp->pdev, 0x42, msi_control);
+			pci_disable_msix(sp->pdev);
+		} else {
+			free_irq(sp->pdev->irq, dev);
+			if (sp->intr_type == MSI)
+				pci_disable_msi(sp->pdev);
+		}
+	}
+	/* Waiting till all Interrupt handlers are complete */
+	cnt = 0;
+	do {
+		msleep(10);
+		if (!atomic_read(&sp->isr_cnt))
+			break;
+		cnt++;
+	} while(cnt < 5);
 
 	/* Kill tasklet. */
 	tasklet_kill(&sp->task);
@@ -5580,15 +5579,6 @@ static void s2io_card_down(nic_t * sp)
 	} while (1);
 	s2io_reset(sp);
 
-	/* Waiting till all Interrupt handlers are complete */
-	cnt = 0;
-	do {
-		msleep(10);
-		if (!atomic_read(&sp->isr_cnt))
-			break;
-		cnt++;
-	} while(cnt < 5);
-
 	spin_lock_irqsave(&sp->tx_lock, flags);
 	/* Free all Tx buffers */
 	free_tx_buffers(sp);
@@ -5689,7 +5679,7 @@ static void s2io_restart_nic(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	nic_t *sp = dev->priv;
 
-	s2io_card_down(sp);
+	s2io_card_down(sp, 0);
 	if (s2io_card_up(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
 			  dev->name);
@@ -5751,6 +5741,7 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
 	lro_t *lro;
 
 	skb->dev = dev;
+
 	if (err) {
 		/*
 		* Drop the packet if bad transfer code. Exception being
@@ -5853,6 +5844,9 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
 						clear_lro_session(lro);
 						goto send_up;
 					case 0: /* sessions exceeded */
+					case -1: /* non-TCP or not
+						  * L2 aggregatable
+						  */
 					case 5: /*
 						 * First pkt in session not
 						 * L3/L4 aggregatable
@@ -6351,8 +6345,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 	    RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
 	writeq(val64, &bar0->rmac_addr_cmd_mem);
-	wait_for_cmd_complete(sp);
-
+	wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+		      RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
 	tmp64 = readq(&bar0->rmac_addr_data0_mem);
 	mac_down = (u32) tmp64;
 	mac_up = (u32) (tmp64 >> 32);