diff options
Diffstat (limited to 'arch')
508 files changed, 77881 insertions, 3284 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4b8acd2851f..70dba166890 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -810,6 +810,11 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. +config ARCH_FLATMEM_HAS_HOLES + bool + default y + depends on FLATMEM + config ARCH_DISCONTIGMEM_ENABLE bool default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig new file mode 100644 index 00000000000..2c4aa11f0b0 --- /dev/null +++ b/arch/arm/configs/ams_delta_defconfig @@ -0,0 +1,1314 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 04:28:32 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=m +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=m +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +# CONFIG_OMAP_DSP_FBEXPORT is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +CONFIG_MACH_AMS_DELTA=y +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_168MHZ is not set +CONFIG_OMAP_ARM_150MHZ=y +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_AMS_DELTA=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Token Ring devices +# + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=y +CONFIG_USB_KAWETH=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_AMS_DELTA=y +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_CLEAN_4x6 is not set +# CONFIG_FONT_CLEAN_5x8 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig new file mode 100644 index 00000000000..568ef1770d5 --- /dev/null +++ b/arch/arm/configs/n770_defconfig @@ -0,0 +1,1421 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8-omap1 +# Fri Jan 18 10:21:06 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_SRAM_PATCH=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +CONFIG_OMAP_COMPONENT_VERSION=y +CONFIG_OMAP_GPIO_SWITCH=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_STI=y +CONFIG_OMAP_STI_CONSOLE=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +CONFIG_MACH_NOKIA770=y +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +CONFIG_OMAP_ARM_216MHZ=y +# CONFIG_OMAP_ARM_192MHZ is not set +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +CONFIG_BT_HCIBRF6150=y +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +# CONFIG_PROC_EVENTS is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP_HW=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +CONFIG_SENSORS_TLV320AIC23=y +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_OMAP=y +CONFIG_FB_OMAP_LCDC_EXTERNAL=y +CONFIG_FB_OMAP_LCDC_HWA742=y +# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set +CONFIG_FB_OMAP_MANUAL_UPDATE=y +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_DUMMY=y +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_OMAP_AIC23=y +# CONFIG_SND_OMAP_TSC2101 is not set +# CONFIG_SND_SX1 is not set +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# SPI devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=y +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_FILE_STORAGE_TEST=y +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# CBUS support +# +CONFIG_CBUS=y +CONFIG_CBUS_TAHVO=y +CONFIG_CBUS_TAHVO_USER=y +CONFIG_CBUS_TAHVO_USB=y +# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set +CONFIG_CBUS_RETU=y +CONFIG_CBUS_RETU_USER=y +CONFIG_CBUS_RETU_POWERBUTTON=y +CONFIG_CBUS_RETU_RTC=y +CONFIG_CBUS_RETU_WDT=y +# CONFIG_CBUS_RETU_HEADSET is not set +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +CONFIG_OMAP_DSP_FBEXPORT=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_LOWMEM is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig new file mode 100644 index 00000000000..b0617c0da2a --- /dev/null +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -0,0 +1,1304 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:47:37 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +# CONFIG_OMAP_MUX_WARNINGS is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +# CONFIG_ARCH_OMAP2420 is not set +CONFIG_ARCH_OMAP2430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +CONFIG_MACH_OMAP_2430SDP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_OMAP is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_GPIO=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MENELAUS is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_OMAP24XX is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 243x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP_HS=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig new file mode 100644 index 00000000000..bb39dfc72d6 --- /dev/null +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -0,0 +1,962 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 12:07:29 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +CONFIG_MACH_OMAP_APOLLON=y +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +CONFIG_MTD_ONENAND_GENERIC=y +# CONFIG_MTD_ONENAND_OMAP2 is not set +# CONFIG_MTD_ONENAND_OTP is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +# CONFIG_HID is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig new file mode 100644 index 00000000000..4b1c252f209 --- /dev/null +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -0,0 +1,1172 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 12:20:19 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +# CONFIG_USB_ALI_M5632 is not set +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig new file mode 100644 index 00000000000..fc66f019d56 --- /dev/null +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -0,0 +1,1178 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 13:01:27 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig new file mode 100644 index 00000000000..0a00a708a4f --- /dev/null +++ b/arch/arm/configs/omap_generic_1710_defconfig @@ -0,0 +1,1088 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 13:02:08 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_ARTHUR=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_BELKIN is not set +# CONFIG_USB_ARMLINUX is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_LOWMEM is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig new file mode 100644 index 00000000000..cf4073b47aa --- /dev/null +++ b/arch/arm/configs/omap_generic_2420_defconfig @@ -0,0 +1,655 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:44:48 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_USER_NS is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_DSP is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x10C08000 +CONFIG_ZBOOT_ROM_BSS=0x10200000 +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 323c1deeb95..c03507202f3 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Mon Mar 3 03:39:48 2008 +# Linux kernel version: 2.6.25-rc2-omap1 +# Wed Feb 20 17:12:36 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y @@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -65,6 +64,7 @@ CONFIG_SYSCTL=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP_OTG=y CONFIG_ARCH_OMAP1=y # CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set # # OMAP Feature Selections # +CONFIG_OMAP_DEBUG_SRAM_PATCH=y # CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +CONFIG_OMAP_GPIO_SWITCH=y CONFIG_OMAP_MUX=y -# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 -# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_DM_TIMER=y CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set @@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y # # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set # CONFIG_OMAP_ARM_216MHZ is not set -CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_192MHZ is not set # CONFIG_OMAP_ARM_168MHZ is not set # CONFIG_OMAP_ARM_120MHZ is not set -# CONFIG_OMAP_ARM_60MHZ is not set +CONFIG_OMAP_ARM_60MHZ=y # CONFIG_OMAP_ARM_30MHZ is not set # @@ -227,6 +235,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y +# CONFIG_PREEMPT is not set CONFIG_HZ=128 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -# CONFIG_LEDS is not set +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set CONFIG_ALIGNMENT_TRAP=y # @@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # CONFIG_ATAGS_PROC is not set @@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ is not set # # Floating point emulation @@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set # # Power management options @@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +CONFIG_DEBUG_DRIVER=y +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -509,6 +554,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support @@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_ISP1301_OMAP is not set +CONFIG_ISP1301_OMAP=y CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -659,8 +718,26 @@ CONFIG_TPS65010=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_TSC2101=y +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -673,7 +750,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -683,6 +759,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -712,6 +789,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -723,6 +801,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_OMAP_WATCHDOG is not set # +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y @@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_OMAP is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y +# CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -CONFIG_SOUND=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Advanced Linux Sound Architecture +# USB Input Devices # -# CONFIG_SND is not set +# CONFIG_USB_HID is not set # -# Open Sound System +# USB HID Boot Protocol drivers # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -CONFIG_HID_DEBUG=y -# CONFIG_HIDRAW is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +# CONFIG_MMC_SPI is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set +# CONFIG_OMAP_DSP is not set # # File systems @@ -894,6 +1141,17 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y # CONFIG_CRYPTO_SEQIV is not set -CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1052,6 +1332,7 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig new file mode 100644 index 00000000000..5bc89185a64 --- /dev/null +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -0,0 +1,1120 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:44:58 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_DEVICES=y +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +CONFIG_MACH_OMAP_H4=y +# CONFIG_MACH_OMAP_H4_TUSB is not set +# CONFIG_MACH_OMAP_H4_OTG is not set +# CONFIG_MACH_OMAP2_H4_USB1 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=y +CONFIG_IRCOMM=y +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_OMAP_IR=y +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_GPIOEXPANDER_OMAP=y +# CONFIG_TWL4030_CORE is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +CONFIG_MENELAUS=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig new file mode 100644 index 00000000000..55b2611bd90 --- /dev/null +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -0,0 +1,1253 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:02 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_INNOVATOR=y +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +CONFIG_OMAP_PS2=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig new file mode 100644 index 00000000000..95d9f2be53e --- /dev/null +++ b/arch/arm/configs/omap_innovator_1610_defconfig @@ -0,0 +1,839 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:05 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_INNOVATOR=y +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index d4ca5e6e4ff..b68e0144cab 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Mon Mar 3 03:35:17 2008 +# Linux kernel version: 2.6.24-rc3-omap1 +# Fri Nov 23 12:24:12 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System Type @@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP_OTG=y CONFIG_ARCH_OMAP1=y # CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set # # OMAP Feature Selections # +CONFIG_OMAP_DEBUG_SRAM_PATCH=y CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set # # OMAP Core Type @@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y # # OMAP Board Type # -CONFIG_MACH_OMAP_INNOVATOR=y -CONFIG_MACH_OMAP_H2=y -CONFIG_MACH_OMAP_H3=y +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set CONFIG_MACH_OMAP_OSK=y # CONFIG_OMAP_OSK_MISTRAL is not set -CONFIG_MACH_NOKIA770=y -CONFIG_MACH_OMAP_GENERIC=y +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set # # OMAP CPU Speed @@ -227,6 +216,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=128 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set -# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set # # Power management options @@ -328,10 +317,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -348,7 +336,6 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -CONFIG_HAVE_IDE=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -578,7 +563,6 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y +# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set -# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y @@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -755,7 +743,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -783,7 +770,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -791,7 +777,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -822,11 +806,11 @@ CONFIG_DAB=y # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_OMAP is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -891,8 +879,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# USB Gadget Support +# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set @@ -900,6 +896,11 @@ CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # +# CBUS support +# +# CONFIG_CBUS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_DNOTIFY=y +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking @@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_SAMPLES is not set @@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO is not set # # Library routines diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig new file mode 100644 index 00000000000..b94800c0e00 --- /dev/null +++ b/arch/arm/configs/omap_perseus2_730_defconfig @@ -0,0 +1,928 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:12 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP730=y +# CONFIG_ARCH_OMAP15XX is not set +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_PERSEUS2=y +# CONFIG_MACH_OMAP_FSAMPLE is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_195MHZ is not set +CONFIG_OMAP_ARM_182MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_OMAP is not set +CONFIG_FB_VIRTUAL=y + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 1464ffe7171..4017d83c9d2 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Mon Jun 2 23:54:48 2008 +# Linux kernel version: 2.6.27-rc4 +# Fri Aug 22 12:38:51 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -56,7 +58,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -83,11 +84,17 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set @@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_TLB_FEROCEON=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -641,11 +652,14 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -815,44 +829,65 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_GPIO is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -865,6 +900,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -884,7 +920,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set +CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set @@ -928,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # # Multimedia devices @@ -961,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -995,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -1037,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1045,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1058,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1084,7 +1119,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1123,6 +1160,7 @@ CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1143,6 +1181,27 @@ CONFIG_RTC_DRV_S35390A=y # # on-CPU RTC drivers # +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MV_XOR=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set # @@ -1222,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1232,13 +1292,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1324,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1338,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1352,7 +1415,18 @@ CONFIG_FRAME_POINTER=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1365,6 +1439,7 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # @@ -1410,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1451,6 +1530,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig new file mode 100644 index 00000000000..40fc6a778e0 --- /dev/null +++ b/arch/arm/configs/palmte_defconfig @@ -0,0 +1,761 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Sat May 19 11:04:27 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_UTS_NS is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +CONFIG_OMAP_GPIO_SWITCH=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +CONFIG_MACH_OMAP_PALMTE=y +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# ISDN subsystem +# + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_OMAP_RTC=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=y +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig new file mode 100644 index 00000000000..e54ced41217 --- /dev/null +++ b/arch/arm/configs/palmtt_defconfig @@ -0,0 +1,844 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc3-omap1 +# Sun Oct 29 00:36:12 2006 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +CONFIG_OMAP_LL_DEBUG_UART2=y +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +CONFIG_OMAP_DSP_FBEXPORT=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +CONFIG_MACH_OMAP_PALMTT=y +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=320 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_OMAP_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_TSC2102 is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_OMAP=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_OMAP=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +CONFIG_RTC_DRV_OMAP=y +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# Synchronous Serial Interfaces (SSI) +# +# CONFIG_OMAP_UWIRE is not set +# CONFIG_OMAP_TSC2101 is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig new file mode 100644 index 00000000000..6361922e71c --- /dev/null +++ b/arch/arm/configs/palmz71_defconfig @@ -0,0 +1,891 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 05:13:00 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-z71" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +CONFIG_MACH_OMAP_PALMZ71=y +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=320 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_TSC2046 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_TSC210X is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_OMAP=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig new file mode 100644 index 00000000000..853dcdd9f2e --- /dev/null +++ b/arch/arm/configs/sx1_defconfig @@ -0,0 +1,1118 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 05:16:10 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +CONFIG_OMAP_GPIO_SWITCH=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=y +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +# CONFIG_OMAP_DSP_FBEXPORT is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +CONFIG_MACH_SX1=y +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=y +# CONFIG_PROC_EVENTS is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Token Ring devices +# + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +CONFIG_FB_OMAP_BOOTLOADER_INIT=y +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_CLEAN_4x6 is not set +# CONFIG_FONT_CLEAN_5x8 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_OMAP_AIC23 is not set +# CONFIG_SND_OMAP_TSC2101 is not set +CONFIG_SND_SX1=y +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=866 +CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +CONFIG_NLS_CODEPAGE_866=y +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=y +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +CONFIG_NLS_ISO8859_5=y +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_KOI8_R=y +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h deleted file mode 100644 index 480c873fa74..00000000000 --- a/arch/arm/include/asm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include <linux/compiler.h> -#include <asm/types.h> -#include <asm/byteorder.h> - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 94a95d7fafd..71934856fc2 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -61,8 +61,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); #define MT_DEVICE_NONSHARED 1 #define MT_DEVICE_CACHED 2 #define MT_DEVICE_IXP2000 3 +#define MT_DEVICE_WC 4 /* - * types 4 onwards can be found in asm/mach/map.h and are undefined + * types 5 onwards can be found in asm/mach/map.h and are undefined * for ioremap */ @@ -215,11 +216,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) #define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) #define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) +#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC) #define iounmap(cookie) __iounmap(cookie) #else #define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) +#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC) #define iounmap(cookie) __arch_iounmap(cookie) #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 06f583b1399..9eb936e49cc 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -18,13 +18,13 @@ struct map_desc { unsigned int type; }; -/* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 +/* types 0-4 are defined in asm/io.h */ +#define MT_CACHECLEAN 5 +#define MT_MINICLEAN 6 +#define MT_LOW_VECTORS 7 +#define MT_HIGH_VECTORS 8 +#define MT_MEMORY 9 +#define MT_ROM 10 #define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED #define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 721c03d53f4..918d0cbbf06 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) * The networking and block device layers use this boolean for bounce * buffer decisions. */ -#define PCI_DMA_BUS_IS_PHYS (0) +#define PCI_DMA_BUS_IS_PHYS (1) /* * Whether pci_unmap_{single,page} is a nop depends upon the diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index aaffaecffcd..ba8ccfede96 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, case 'D': case 'k': case 'c': - kgdb_contthread = NULL; - /* * Try to read optional parameter, pc unchanged if no parm. * If this was a compiled breakpoint, we need to move diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S index ff6ece487ff..67c2bf4774b 100644 --- a/arch/arm/lib/sha1.S +++ b/arch/arm/lib/sha1.S @@ -29,7 +29,7 @@ ENTRY(sha_transform) stmfd sp!, {r4 - r8, lr} @ for (i = 0; i < 16; i++) - @ W[i] = be32_to_cpu(in[i]); */ + @ W[i] = be32_to_cpu(in[i]); #ifdef __ARMEB__ mov r4, r0 diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 720c48b9ee0..aa2fc375a32 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; - if (id < 0) - return; - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c index fd9a7c11d62..004819ea85c 100644 --- a/arch/arm/mach-footbridge/time.c +++ b/arch/arm/mach-footbridge/time.c @@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void) } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); } if ((year += 1900) < 1970) year += 100; @@ -76,7 +76,7 @@ static int set_isa_cmos_time(void) cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); + cmos_minutes = bcd2bin(cmos_minutes); /* * since we're only adjusting minutes and seconds, @@ -92,8 +92,8 @@ static int set_isa_cmos_time(void) if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); + real_seconds = bin2bcd(real_seconds); + real_minutes = bin2bcd(real_minutes); } CMOS_WRITE(real_seconds,RTC_SECONDS); CMOS_WRITE(real_minutes,RTC_MINUTES); diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 0a152ed15a8..df8582a6231 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = { }; static struct imxuart_platform_data uart_pdata = { - .flags = 0, + .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 826010d5d01..2baeaeb0c90 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { #ifdef CONFIG_ARCH_OMAP730 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { + .phys_base = OMAP730_MCBSP1_BASE, .virt_base = io_p2v(OMAP730_MCBSP1_BASE), .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP730_MCBSP2_BASE, .virt_base = io_p2v(OMAP730_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, @@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP15XX static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { { + .phys_base = OMAP1510_MCBSP1_BASE, .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP1510_MCBSP2_BASE, .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, @@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP1510_MCBSP3_BASE, .virt_base = OMAP1510_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, @@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP16XX static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { { + .phys_base = OMAP1610_MCBSP1_BASE, .virt_base = OMAP1610_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP1610_MCBSP2_BASE, .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, @@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP1610_MCBSP3_BASE, .virt_base = OMAP1610_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d4d6385cad7..b72ca13b3ac 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 27eb6e3ca92..b261f1f80b5 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = { #ifdef CONFIG_ARCH_OMAP24XX static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { { + .phys_base = OMAP24XX_MCBSP1_BASE, .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, @@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP24XX_MCBSP2_BASE, .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, @@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP34XX static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { + .phys_base = OMAP34XX_MCBSP1_BASE, .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, @@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP34XX_MCBSP2_BASE, .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index e75bd7004b9..0bd195551a2 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -41,6 +41,7 @@ struct pci_bus; struct pci_sys_data; void orion5x_pcie_id(u32 *dev, u32 *rev); +void orion5x_pci_disable(void); void orion5x_pci_set_cardbus_mode(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 1a1d84b80a6..b38c65ccfb1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = { static struct i2c_board_info __initdata dns323_i2c_devices[] = { { I2C_BOARD_INFO("g760a", 0x3e), -#if 0 - /* this entry requires the new-style driver model lm75 driver, - * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ }, { - I2C_BOARD_INFO("g751", 0x48), -#endif + I2C_BOARD_INFO("lm75", 0x48), }, { I2C_BOARD_INFO("m41t80", 0x68), }, diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index cb72f1bb9cb..e321ec33183 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = { static int __init kurobox_pro_pci_init(void) { - if (machine_is_kurobox_pro()) + if (machine_is_kurobox_pro()) { + orion5x_pci_disable(); pci_common_init(&kurobox_pro_pci); + } return 0; } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index fbceecc4b7e..a7b7d77b1b0 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); +static int orion5x_pci_disabled __initdata; + +void __init orion5x_pci_disable(void) +{ + orion5x_pci_disabled = 1; +} + void __init orion5x_pci_set_cardbus_mode(void) { orion5x_pci_cardbus_mode = 1; @@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); ret = pcie_setup(sys); - } else if (nr == 1) { + } else if (nr == 1 && !orion5x_pci_disabled) { orion5x_pci_set_bus_nr(sys->busnr); ret = pci_setup(sys); } @@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys if (nr == 0) { bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); - } else if (nr == 1) { + } else if (nr == 1 && !orion5x_pci_disabled) { bus = pci_scan_bus(sys->busnr, &pci_ops, sys); } else { bus = NULL; @@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCIe endpoint? */ - if (bus < orion5x_pci_local_bus_nr()) + if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr()) return IRQ_ORION5X_PCIE0_INT; return -1; diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index dd657163cd8..9d689051419 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void) /* * Configure peripherals. */ + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); + platform_device_register(&qnap_ts209_nor_flash); + orion5x_ehci0_init(); orion5x_ehci1_init(); qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE + @@ -296,12 +300,9 @@ static void __init qnap_ts209_init(void) orion5x_i2c_init(); orion5x_sata_init(&qnap_ts209_sata_data); orion5x_uart0_init(); + orion5x_uart1_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts209_nor_flash); - platform_device_register(&qnap_ts209_button_device); /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index b27d2b76208..d85588ac7ef 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -278,6 +278,10 @@ static void __init qnap_ts409_init(void) /* * Configure peripherals. */ + orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE, + QNAP_TS409_NOR_BOOT_SIZE); + platform_device_register(&qnap_ts409_nor_flash); + orion5x_ehci0_init(); qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE + qnap_ts409_partitions[5].offset, @@ -285,10 +289,7 @@ static void __init qnap_ts409_init(void) orion5x_eth_init(&qnap_tsx09_eth_data); orion5x_i2c_init(); orion5x_uart0_init(); - - orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE, - QNAP_TS409_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts409_nor_flash); + orion5x_uart1_init(); platform_device_register(&qnap_ts409_button_device); diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 123a950db46..e703a8d209e 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -38,6 +38,7 @@ #include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> +#include <mach/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> @@ -532,6 +533,7 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &corgi_pcmcia_config; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 055ec63d768..3f5f484549b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -36,6 +36,7 @@ #include <mach/pxa2xx-gpio.h> #include <mach/mmc.h> #include <mach/udc.h> +#include <mach/i2c.h> #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> @@ -387,6 +388,7 @@ static void __init poodle_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &poodle_pcmcia_config; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cd39005c98f..b569f3b4cf3 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -40,6 +40,7 @@ #include <mach/pxa2xx-gpio.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> +#include <mach/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/ohci.h> @@ -574,6 +575,7 @@ static void __init common_init(void) pxa_set_ficp_info(&spitz_ficp_platform_data); set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_i2c_info(NULL); } #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 67e18509d7b..b0d6b32654c 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -17,9 +17,9 @@ #include <linux/interrupt.h> #include <linux/clockchips.h> #include <linux/sched.h> +#include <linux/cnt32_to_63.h> #include <asm/div64.h> -#include <asm/cnt32_to_63.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <mach/pxa-regs.h> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5dab30eafdd..9f3ef9eb32e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -50,6 +50,7 @@ #include <asm/mach/sharpsl_param.h> #include "generic.h" +#include "clock.h" #include "devices.h" static unsigned long tosa_pin_config[] = { @@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = { .wakeup = 1, .active_low = 1, }, + { + .type = EV_SW, + .code = SW_HEADPHONE_INSERT, + .gpio = TOSA_GPIO_EAR_IN, + .desc = "HeadPhone insert", + .active_low = 1, + .debounce_interval = 300, + }, }; static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { @@ -792,6 +801,8 @@ static void __init tosa_init(void) pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; + clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 7dd458363a5..6026d091a2f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -48,11 +48,11 @@ #define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) #define S3C2443_CLKSRC_I2S_MASK (3<<14) -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) +#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7) +#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7) +#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7) #define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) #define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c index b2ae237042a..598d130633d 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.c +++ b/arch/arm/mach-s3c2410/nor-simtec.c @@ -30,6 +30,7 @@ #include <mach/bast-map.h> #include <mach/bast-cpld.h> +#include "nor-simtec.h" static void simtec_nor_vpp(struct map_info *map, int vpp) { @@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp) local_irq_restore(flags); } -struct physmap_flash_data simtec_nor_pdata = { +static struct physmap_flash_data simtec_nor_pdata = { .width = 2, .set_vpp = simtec_nor_vpp, .nr_parts = 0, diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 4c061d29463..ad980a1690c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -395,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) } static struct s3c2410_spigpio_info jive_lcd_spi = { - .bus_num = 0, + .bus_num = 1, .pin_clk = S3C2410_GPG8, .pin_mosi = S3C2410_GPB8, .chip_select = jive_lcd_spi_chipselect, diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 1362994c78a..b422526f6d8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -18,9 +18,9 @@ #include <linux/ioport.h> #include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/platform_device.h> +#include <linux/cnt32_to_63.h> #include <asm/div64.h> -#include <asm/cnt32_to_63.h> #include <mach/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h index bc120850d31..cc6b4bfcecf 100644 --- a/arch/arm/mach-sa1100/include/mach/jornada720.h +++ b/arch/arm/mach-sa1100/include/mach/jornada720.h @@ -1,10 +1,10 @@ /* * arch/arm/mach-sa1100/include/mach/jornada720.h * - * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 + * SSP/MCU communication definitions for HP Jornada 710/720/728 * - * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> - * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu> + * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> + * Copyright 2000 John Ankcorn <jca@lcs.mit.edu> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,3 +25,8 @@ #define PWMOFF 0xDF #define TXDUMMY 0x11 #define ERRORCODE 0x00 + +extern void jornada_ssp_start(void); +extern void jornada_ssp_end(void); +extern int jornada_ssp_inout(u8 byte); +extern int jornada_ssp_byte(u8 byte); diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 06ea7abd917..28cf3696797 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -21,8 +21,8 @@ #include <linux/slab.h> #include <mach/hardware.h> -#include <asm/hardware/ssp.h> #include <mach/jornada720.h> +#include <asm/hardware/ssp.h> static DEFINE_SPINLOCK(jornada_ssp_lock); static unsigned long jornada_ssp_flags; @@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout); * jornada_ssp_start - enable mcu * */ -int jornada_ssp_start() +void jornada_ssp_start(void) { spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags); GPCR = GPIO_GPIO25; udelay(50); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_start); @@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start); * jornada_ssp_end - disable mcu and turn off lock * */ -int jornada_ssp_end() +void jornada_ssp_end(void) { GPSR = GPIO_GPIO25; spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_end); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index d75e795c893..b638f10411e 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,8 +28,8 @@ #include <linux/amba/clcd.h> #include <linux/clocksource.h> #include <linux/clockchips.h> +#include <linux/cnt32_to_63.h> -#include <asm/cnt32_to_63.h> #include <asm/system.h> #include <mach/hardware.h> #include <asm/io.h> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 25d9a11eb61..a713e40e1f1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -211,6 +211,12 @@ static struct mem_type mem_types[] = { PMD_SECT_TEX(1), .domain = DOMAIN_IO, }, + [MT_DEVICE_WC] = { /* ioremap_wc */ + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PROT_SECT_DEVICE, + .domain = DOMAIN_IO, + }, [MT_CACHECLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, @@ -273,6 +279,20 @@ static void __init build_mem_type_table(void) } /* + * On non-Xscale3 ARMv5-and-older systems, use CB=01 + * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3 + * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable + * in xsc3 parlance, Uncached Normal in ARMv6 parlance). + */ + if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) { + mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } else { + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } + + /* * ARMv5 and lower, bit 4 must be set for page tables. * (was: cache "update-able on write" bit on ARM610) * However, Xscale cores require this bit to be cleared. diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 2f862721883..0a38f0b396e 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -37,7 +37,6 @@ #include <linux/proc_fs.h> #include <linux/semaphore.h> #include <linux/string.h> -#include <linux/version.h> #include <mach/clock.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 187e3d8bfdf..01da719a745 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -21,6 +21,7 @@ #include <mach/tc.h> #include <mach/board.h> +#include <mach/mmc.h> #include <mach/mux.h> #include <mach/gpio.h> #include <mach/menelaus.h> @@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT INT_24XX_MMC_IRQ +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc) +#define OMAP_MMC1_INT INT_24XX_MMC_IRQ + +#define OMAP_MMC2_BASE 0x480b4000 +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc) +#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ + #else + #define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f) #define OMAP_MMC1_INT INT_MMC -#endif + #define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f) +#define OMAP_MMC2_INT INT_1610_MMC2 + +#endif -static struct omap_mmc_conf mmc1_conf; +static struct omap_mmc_platform_data mmc1_data; static u64 mmc1_dmamask = 0xffffffff; static struct resource mmc1_resources[] = { { .start = OMAP_MMC1_BASE, - .end = OMAP_MMC1_BASE + 0x7f, + .end = OMAP_MMC1_END, .flags = IORESOURCE_MEM, }, { @@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = { .id = 1, .dev = { .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, + .platform_data = &mmc1_data, }, .num_resources = ARRAY_SIZE(mmc1_resources), .resource = mmc1_resources, }; -#ifdef CONFIG_ARCH_OMAP16XX +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) -static struct omap_mmc_conf mmc2_conf; +static struct omap_mmc_platform_data mmc2_data; static u64 mmc2_dmamask = 0xffffffff; static struct resource mmc2_resources[] = { { .start = OMAP_MMC2_BASE, - .end = OMAP_MMC2_BASE + 0x7f, + .end = OMAP_MMC2_END, .flags = IORESOURCE_MEM, }, { - .start = INT_1610_MMC2, + .start = OMAP_MMC2_INT, .flags = IORESOURCE_IRQ, }, }; @@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = { .id = 2, .dev = { .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, + .platform_data = &mmc2_data, }, .num_resources = ARRAY_SIZE(mmc2_resources), .resource = mmc2_resources, }; #endif -static void __init omap_init_mmc(void) +static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) { - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) + if (cpu_is_omap2430() || cpu_is_omap34xx()) return; - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { + if (mmc_conf->mmc[0].enabled) { if (cpu_is_omap24xx()) { omap_cfg_reg(H18_24XX_MMC_CMD); omap_cfg_reg(H15_24XX_MMC_CLKI); @@ -292,7 +300,7 @@ static void __init omap_init_mmc(void) omap_cfg_reg(P20_1710_MMC_DATDIR0); } } - if (mmc->wire4) { + if (mmc_conf->mmc[0].wire4) { if (cpu_is_omap24xx()) { omap_cfg_reg(H14_24XX_MMC_DAT1); omap_cfg_reg(E19_24XX_MMC_DAT2); @@ -303,25 +311,22 @@ static void __init omap_init_mmc(void) } else { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) + if (!mmc_conf->mmc[0].nomux) omap_cfg_reg(MMC_DAT2); omap_cfg_reg(MMC_DAT3); } } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); } #ifdef CONFIG_ARCH_OMAP16XX /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { + if (mmc_conf->mmc[1].enabled) { + if (!mmc_conf->mmc[1].nomux) { omap_cfg_reg(Y8_1610_MMC2_CMD); omap_cfg_reg(Y10_1610_MMC2_CLK); omap_cfg_reg(R18_1610_MMC2_CLKIN); omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { + if (mmc_conf->mmc[1].wire4) { omap_cfg_reg(V8_1610_MMC2_DAT1); omap_cfg_reg(W15_1610_MMC2_DAT2); omap_cfg_reg(R10_1610_MMC2_DAT3); @@ -337,14 +342,55 @@ static void __init omap_init_mmc(void) if (cpu_is_omap1710()) omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), MOD_CONF_CTRL_1); - mmc2_conf = *mmc; + } +#endif +} + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + omap_init_mmc_conf(mmc_conf); + + if (mmc_conf->mmc[0].enabled) { + mmc1_data.conf = mmc_conf->mmc[0]; + (void) platform_device_register(&mmc_omap_device1); + } + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + if (mmc_conf->mmc[1].enabled) { + mmc2_data.conf = mmc_conf->mmc[1]; (void) platform_device_register(&mmc_omap_device2); } #endif - return; } + +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) +{ + switch (host) { + case 1: + mmc1_data = *info; + break; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + case 2: + mmc2_data = *info; + break; +#endif + default: + BUG(); + } +} + #else static inline void omap_init_mmc(void) {} +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {} #endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 3e76ee2bc73..9e1341ebc14 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1488,7 +1488,7 @@ static int __init _omap_gpio_init(void) bank->chip.set = gpio_set; if (bank_is_mpuio(bank)) { bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP1 +#ifdef CONFIG_ARCH_OMAP16XX bank->chip.dev = &omap_mpuio_device.dev; #endif bank->chip.base = OMAP_MPUIO(0); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 6eb44a92871..8fdb95e26fc 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -315,6 +315,7 @@ struct omap_mcbsp_ops { }; struct omap_mcbsp_platform_data { + unsigned long phys_base; u32 virt_base; u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; @@ -324,6 +325,7 @@ struct omap_mcbsp_platform_data { struct omap_mcbsp { struct device *dev; + unsigned long phys_base; u32 io_base; u8 id; u8 free; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d0844050f2d..014d26574bb 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, + mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1, 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, @@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, omap_set_dma_src_params(mcbsp[id].dma_rx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, + mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1, 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, @@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) mcbsp[id].dma_tx_lch = -1; mcbsp[id].dma_rx_lch = -1; + mcbsp[id].phys_base = pdata->phys_base; mcbsp[id].io_base = pdata->virt_base; /* Default I/O is IRQ based */ mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 849f8469714..3caec6bad3e 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc) * drivers themsevles. */ -int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) +static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); void __iomem *base = ourchip->base; @@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) return 0; } -int s3c24xx_gpiolib_output(struct gpio_chip *chip, +static int s3c24xx_gpiolib_output(struct gpio_chip *chip, unsigned offset, int value) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); @@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip, return 0; } -void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value) +static void s3c24xx_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); void __iomem *base = ourchip->base; @@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value) local_irq_restore(flags); } -int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset) +static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); unsigned long val; @@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, return 0; } - -struct s3c24xx_gpio_chip gpios[] = { +static struct s3c24xx_gpio_chip gpios[] = { [0] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), .chip = { diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index ccfdc9d7ae4..306cc9c6f9e 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk) /* TODO - add set rate calls. */ -struct clk clk_timer_scaler[] = { +static struct clk clk_timer_scaler[] = { [0] = { .name = "pwm-scaler0", .id = -1, @@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = { }, }; -struct clk clk_timer_tclk[] = { +static struct clk clk_timer_tclk[] = { [0] = { .name = "pwm-tclk0", .id = -1, @@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) return 0; } -struct pwm_tdiv_clk clk_timer_tdiv[] = { +static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { .name = "pwm-tdiv", diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 18c4bdc49a0..7a92c938542 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/pwm.h> +#include <asm/plat-s3c24xx/devs.h> #include <asm/plat-s3c/regs-timer.h> struct pwm_device { @@ -38,7 +39,7 @@ struct pwm_device { unsigned char pwm_id; }; -#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg) +#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) static struct clk *clk_scaler[2]; @@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm) EXPORT_SYMBOL(pwm_disable); -unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) +static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) { unsigned long tin_parent_rate; unsigned int div; diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index ee4c292683e..dfc3443e23a 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -325,7 +325,7 @@ static int __init atstk1002_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif -#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_mci(0, MCI_PDATA); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore new file mode 100644 index 00000000000..64ea9d0141d --- /dev/null +++ b/arch/avr32/boot/images/.gitignore @@ -0,0 +1,4 @@ +uImage +uImage.srec +vmlinux.cso +sfdwarf.log diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/avr32/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c index e4796c67a83..d6a8193a1d2 100644 --- a/arch/avr32/kernel/asm-offsets.c +++ b/arch/avr32/kernel/asm-offsets.c @@ -4,6 +4,8 @@ * to extract and format the required data. */ +#include <linux/mm.h> +#include <linux/sched.h> #include <linux/thread_info.h> #include <linux/kbuild.h> @@ -17,4 +19,8 @@ void foo(void) OFFSET(TI_rar_saved, thread_info, rar_saved); OFFSET(TI_rsr_saved, thread_info, rsr_saved); OFFSET(TI_restart_block, thread_info, restart_block); + BLANK(); + OFFSET(TSK_active_mm, task_struct, active_mm); + BLANK(); + OFFSET(MM_pgd, mm_struct, pgd); } diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 84a7d44edc6..11e310c567a 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit); EXPORT_SYMBOL(find_next_zero_bit); EXPORT_SYMBOL(find_first_bit); EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(generic_find_next_le_bit); EXPORT_SYMBOL(generic_find_next_zero_le_bit); /* I/O primitives (lib/io-*.S) */ diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 2b398cae110..33d49377b8b 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -334,9 +334,64 @@ save_full_context_ex: /* Low-level exception handlers */ handle_critical: + /* + * AT32AP700x errata: + * + * After a Java stack overflow or underflow trap, any CPU + * memory access may cause erratic behavior. This will happen + * when the four least significant bits of the JOSP system + * register contains any value between 9 and 15 (inclusive). + * + * Possible workarounds: + * - Don't use the Java Extension Module + * - Ensure that the stack overflow and underflow trap + * handlers do not do any memory access or trigger any + * exceptions before the overflow/underflow condition is + * cleared (by incrementing or decrementing the JOSP) + * - Make sure that JOSP does not contain any problematic + * value before doing any exception or interrupt + * processing. + * - Set up a critical exception handler which writes a + * known-to-be-safe value, e.g. 4, to JOSP before doing + * any further processing. + * + * We'll use the last workaround for now since we cannot + * guarantee that user space processes don't use Java mode. + * Non-well-behaving userland will be terminated with extreme + * prejudice. + */ +#ifdef CONFIG_CPU_AT32AP700X + /* + * There's a chance we can't touch memory, so temporarily + * borrow PTBR to save the stack pointer while we fix things + * up... + */ + mtsr SYSREG_PTBR, sp + mov sp, 4 + mtsr SYSREG_JOSP, sp + mfsr sp, SYSREG_PTBR + sub pc, -2 + + /* Push most of pt_regs on stack. We'll do the rest later */ sub sp, 4 - stmts --sp, r0-lr - rcall save_full_context_ex + pushm r0-r12 + + /* PTBR mirrors current_thread_info()->task->active_mm->pgd */ + get_thread_info r0 + ld.w r1, r0[TI_task] + ld.w r2, r1[TSK_active_mm] + ld.w r3, r2[MM_pgd] + mtsr SYSREG_PTBR, r3 +#else + sub sp, 4 + pushm r0-r12 +#endif + sub r0, sp, -(14 * 4) + mov r1, lr + mfsr r2, SYSREG_RAR_EX + mfsr r3, SYSREG_RSR_EX + pushm r0-r3 + mfsr r12, SYSREG_ECR mov r11, sp rcall do_critical_exception diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 890286a1e62..673178e235f 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -109,3 +109,12 @@ __sys_epoll_pwait: rcall sys_epoll_pwait sub sp, -4 popm pc + + .global __sys_sync_file_range + .type __sys_sync_file_range,@function +__sys_sync_file_range: + pushm lr + st.w --sp, ARG6 + rcall sys_sync_file_range + sub sp, -4 + popm pc diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 478bda4c4a0..7ee0057613b 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -275,7 +275,7 @@ sys_call_table: .long sys_set_robust_list .long sys_get_robust_list /* 260 */ .long __sys_splice - .long sys_sync_file_range + .long __sys_sync_file_range .long sys_tee .long sys_vmsplice .long __sys_epoll_pwait /* 265 */ diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index b835c4c0136..0d987373bc0 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) switch (ret) { case NOTIFY_OK: case NOTIFY_STOP: - return; + break; case NOTIFY_BAD: die("Fatal Non-Maskable Interrupt", regs, SIGINT); default: + printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); + nmi_disable(); break; } - - printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); - nmi_disable(); + nmi_exit(); } asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S index c6b91dee857..997b33b2288 100644 --- a/arch/avr32/lib/findbit.S +++ b/arch/avr32/lib/findbit.S @@ -123,6 +123,36 @@ ENTRY(find_next_bit) brgt 1b retal r11 +ENTRY(generic_find_next_le_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ldswp.w r8, r12[0] + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ldswp.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + ENTRY(generic_find_next_zero_le_bit) lsr r8, r10, 5 sub r9, r11, r10 diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S index 5be4de65b20..17503b0ed6c 100644 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -134,7 +134,7 @@ pm_standby: mov r11, SDRAMC_LPR_LPCB_SELF_RFR bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ sync 0 /* flush write buffer */ - st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */ + st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ ld.w r11, r12[SDRAMC_LPR] unmask_interrupts sleep CPU_SLEEP_FROZEN diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f64d25973a3..4154ff1101f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -855,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" config PCI bool "PCI support" + depends on BROKEN help Support for PCI bus. diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 9564731ad3a..eac0533d6e4 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -98,36 +98,20 @@ libs-y += arch/$(ARCH)/lib/ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ +machdirs := $(patsubst %,arch/blackfin/mach-%/, $(machine-y)) +KBUILD_CFLAGS += -Iarch/$(ARCH)/include/ +KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include -# Update machine arch symlinks if something which affects -# them changed. We use .mach to indicate when they were updated -# last, otherwise make uses the target directory mtime. - - show_mach_symlink = : - quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' -silent_show_mach_symlink = : -include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf - @$($(quiet)show_mach_symlink) -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-$(ARCH) - $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach -else - $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach -endif - @touch $@ +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs)) CLEAN_FILES += \ - include/asm-$(ARCH)/asm-offsets.h \ + arch/$(ARCH)/include/asm/asm-offsets.h \ arch/$(ARCH)/kernel/asm-offsets.s \ - include/asm-$(ARCH)/mach \ - include/asm-$(ARCH)/.mach -archprepare: include/asm-blackfin/.mach archclean: $(Q)$(MAKE) $(clean)=$(boot) - INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot BOOT_TARGETS = vmImage diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore new file mode 100644 index 00000000000..7858564a446 --- /dev/null +++ b/arch/blackfin/include/asm/.gitignore @@ -0,0 +1 @@ ++mach diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild new file mode 100644 index 00000000000..606ecfdcc96 --- /dev/null +++ b/arch/blackfin/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm + +unifdef-y += fixed_code.h diff --git a/arch/blackfin/include/asm/a.out.h b/arch/blackfin/include/asm/a.out.h new file mode 100644 index 00000000000..6c3d652ebd3 --- /dev/null +++ b/arch/blackfin/include/asm/a.out.h @@ -0,0 +1,19 @@ +#ifndef __BFIN_A_OUT_H__ +#define __BFIN_A_OUT_H__ + +struct exec { + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __BFIN_A_OUT_H__ */ diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h new file mode 100644 index 00000000000..7cf50871860 --- /dev/null +++ b/arch/blackfin/include/asm/atomic.h @@ -0,0 +1,144 @@ +#ifndef __ARCH_BLACKFIN_ATOMIC__ +#define __ARCH_BLACKFIN_ATOMIC__ + +#include <asm/system.h> /* local_irq_XXX() */ + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * Generally we do not concern about SMP BFIN systems, so we don't have + * to deal with that. + * + * Tony Kou (tonyko@lineo.ca) Lineo Inc. 2001 + */ + +typedef struct { + int counter; +} atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +static __inline__ void atomic_add(int i, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter += i; + local_irq_restore(flags); +} + +static __inline__ void atomic_sub(int i, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter -= i; + local_irq_restore(flags); + +} + +static inline int atomic_add_return(int i, atomic_t * v) +{ + int __temp = 0; + long flags; + + local_irq_save(flags); + v->counter += i; + __temp = v->counter; + local_irq_restore(flags); + + + return __temp; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +static inline int atomic_sub_return(int i, atomic_t * v) +{ + int __temp = 0; + long flags; + + local_irq_save(flags); + v->counter -= i; + __temp = v->counter; + local_irq_restore(flags); + + return __temp; +} + +static __inline__ void atomic_inc(volatile atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter++; + local_irq_restore(flags); +} + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ void atomic_dec(volatile atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter--; + local_irq_restore(flags); +} + +static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter &= ~mask; + local_irq_restore(flags); +} + +static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter |= mask; + local_irq_restore(flags); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#include <asm-generic/atomic.h> + +#endif /* __ARCH_BLACKFIN_ATOMIC __ */ diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h new file mode 100644 index 00000000000..215506cd87b --- /dev/null +++ b/arch/blackfin/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMBFIN_AUXVEC_H +#define __ASMBFIN_AUXVEC_H + +#endif diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h new file mode 100644 index 00000000000..7ba70de66f2 --- /dev/null +++ b/arch/blackfin/include/asm/bfin-global.h @@ -0,0 +1,117 @@ +/* + * File: include/asm-blackfin/bfin-global.h + * Based on: + * Author: * + * Created: + * Description: Global extern defines for blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BFIN_GLOBAL_H_ +#define _BFIN_GLOBAL_H_ + +#ifndef __ASSEMBLY__ + +#include <asm-generic/sections.h> +#include <asm/ptrace.h> +#include <asm/user.h> +#include <linux/linkage.h> +#include <linux/types.h> + +#if defined(CONFIG_DMA_UNCACHED_4M) +# define DMA_UNCACHED_REGION (4 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_2M) +# define DMA_UNCACHED_REGION (2 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_1M) +# define DMA_UNCACHED_REGION (1024 * 1024) +#else +# define DMA_UNCACHED_REGION (0) +#endif + +extern unsigned long get_cclk(void); +extern unsigned long get_sclk(void); +extern unsigned long sclk_to_usecs(unsigned long sclk); +extern unsigned long usecs_to_sclk(unsigned long usecs); + +extern void dump_bfin_process(struct pt_regs *regs); +extern void dump_bfin_mem(struct pt_regs *regs); +extern void dump_bfin_trace_buffer(void); + +/* init functions only */ +extern int init_arch_irq(void); +extern void bfin_icache_init(void); +extern void bfin_dcache_init(void); +extern void init_exception_vectors(void); +extern void program_IAR(void); + +extern void bfin_reset(void); +extern asmlinkage void lower_to_irq14(void); +extern asmlinkage void bfin_return_from_exception(void); +extern asmlinkage void evt14_softirq(void); +extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); +extern int bfin_internal_set_wake(unsigned int irq, unsigned int state); + +extern void *l1_data_A_sram_alloc(size_t); +extern void *l1_data_B_sram_alloc(size_t); +extern void *l1_inst_sram_alloc(size_t); +extern void *l1_data_sram_alloc(size_t); +extern void *l1_data_sram_zalloc(size_t); +extern void *l2_sram_alloc(size_t); +extern void *l2_sram_zalloc(size_t); +extern int l1_data_A_sram_free(const void*); +extern int l1_data_B_sram_free(const void*); +extern int l1_inst_sram_free(const void*); +extern int l1_data_sram_free(const void*); +extern int l2_sram_free(const void *); +extern int sram_free(const void*); + +#define L1_INST_SRAM 0x00000001 +#define L1_DATA_A_SRAM 0x00000002 +#define L1_DATA_B_SRAM 0x00000004 +#define L1_DATA_SRAM 0x00000006 +#define L2_SRAM 0x00000008 +extern void *sram_alloc_with_lsl(size_t, unsigned long); +extern int sram_free_with_lsl(const void*); + +extern const char bfin_board_name[]; + +extern unsigned long bfin_sic_iwr[]; +extern unsigned vr_wakeup; +extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ +extern unsigned long _ramstart, _ramend, _rambase; +extern unsigned long memory_start, memory_end, physical_mem_end; +extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[], + _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], + _ebss_l2[], _l2_lma_start[]; + +/* only used when CONFIG_MTD_UCLINUX */ +extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; + +#ifdef CONFIG_BFIN_ICACHE_LOCK +extern void cache_grab_lock(int way); +extern void cache_lock(int way); +#endif + +#endif + +#endif /* _BLACKFIN_H_ */ diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h new file mode 100644 index 00000000000..9fa19158e38 --- /dev/null +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -0,0 +1,137 @@ +/************************************************************ + +* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved +* +* FILE bfin5xx_spi.h +* PROGRAMMER(S): Luke Yang (Analog Devices Inc.) +* +* +* DATE OF CREATION: March. 10th 2006 +* +* SYNOPSIS: +* +* DESCRIPTION: header file for SPI controller driver for Blackfin5xx. +************************************************************** + +* MODIFICATION HISTORY: +* March 10, 2006 bfin5xx_spi.h Created. (Luke Yang) + +************************************************************/ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#define SPI_READ 0 +#define SPI_WRITE 1 + +#define SPI_CTRL_OFF 0x0 +#define SPI_FLAG_OFF 0x4 +#define SPI_STAT_OFF 0x8 +#define SPI_TXBUFF_OFF 0xc +#define SPI_RXBUFF_OFF 0x10 +#define SPI_BAUD_OFF 0x14 +#define SPI_SHAW_OFF 0x18 + + +#define BIT_CTL_ENABLE 0x4000 +#define BIT_CTL_OPENDRAIN 0x2000 +#define BIT_CTL_MASTER 0x1000 +#define BIT_CTL_POLAR 0x0800 +#define BIT_CTL_PHASE 0x0400 +#define BIT_CTL_BITORDER 0x0200 +#define BIT_CTL_WORDSIZE 0x0100 +#define BIT_CTL_MISOENABLE 0x0020 +#define BIT_CTL_RXMOD 0x0000 +#define BIT_CTL_TXMOD 0x0001 +#define BIT_CTL_TIMOD_DMA_TX 0x0003 +#define BIT_CTL_TIMOD_DMA_RX 0x0002 +#define BIT_CTL_SENDOPT 0x0004 +#define BIT_CTL_TIMOD 0x0003 + +#define BIT_STAT_SPIF 0x0001 +#define BIT_STAT_MODF 0x0002 +#define BIT_STAT_TXE 0x0004 +#define BIT_STAT_TXS 0x0008 +#define BIT_STAT_RBSY 0x0010 +#define BIT_STAT_RXS 0x0020 +#define BIT_STAT_TXCOL 0x0040 +#define BIT_STAT_CLR 0xFFFF + +#define BIT_STU_SENDOVER 0x0001 +#define BIT_STU_RECVFULL 0x0020 + +#define CFG_SPI_ENABLE 1 +#define CFG_SPI_DISABLE 0 + +#define CFG_SPI_OUTENABLE 1 +#define CFG_SPI_OUTDISABLE 0 + +#define CFG_SPI_ACTLOW 1 +#define CFG_SPI_ACTHIGH 0 + +#define CFG_SPI_PHASESTART 1 +#define CFG_SPI_PHASEMID 0 + +#define CFG_SPI_MASTER 1 +#define CFG_SPI_SLAVE 0 + +#define CFG_SPI_SENELAST 0 +#define CFG_SPI_SENDZERO 1 + +#define CFG_SPI_RCVFLUSH 1 +#define CFG_SPI_RCVDISCARD 0 + +#define CFG_SPI_LSBFIRST 1 +#define CFG_SPI_MSBFIRST 0 + +#define CFG_SPI_WORDSIZE16 1 +#define CFG_SPI_WORDSIZE8 0 + +#define CFG_SPI_MISOENABLE 1 +#define CFG_SPI_MISODISABLE 0 + +#define CFG_SPI_READ 0x00 +#define CFG_SPI_WRITE 0x01 +#define CFG_SPI_DMAREAD 0x02 +#define CFG_SPI_DMAWRITE 0x03 + +#define CFG_SPI_CSCLEARALL 0 +#define CFG_SPI_CHIPSEL1 1 +#define CFG_SPI_CHIPSEL2 2 +#define CFG_SPI_CHIPSEL3 3 +#define CFG_SPI_CHIPSEL4 4 +#define CFG_SPI_CHIPSEL5 5 +#define CFG_SPI_CHIPSEL6 6 +#define CFG_SPI_CHIPSEL7 7 + +#define CFG_SPI_CS1VALUE 1 +#define CFG_SPI_CS2VALUE 2 +#define CFG_SPI_CS3VALUE 3 +#define CFG_SPI_CS4VALUE 4 +#define CFG_SPI_CS5VALUE 5 +#define CFG_SPI_CS6VALUE 6 +#define CFG_SPI_CS7VALUE 7 + +#define CMD_SPI_SET_BAUDRATE 2 +#define CMD_SPI_GET_SYSTEMCLOCK 25 +#define CMD_SPI_SET_WRITECONTINUOUS 26 + +/* device.platform_data for SSP controller devices */ +struct bfin5xx_spi_master { + u16 num_chipselect; + u8 enable_dma; + u16 pin_req[4]; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct bfin5xx_spi_chip { + u16 ctl_reg; + u8 enable_dma; + u8 bits_per_word; + u8 cs_change_per_word; + u16 cs_chg_udelay; /* Some devices require 16-bit delays */ +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h new file mode 100644 index 00000000000..fccbb595464 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_simple_timer.h @@ -0,0 +1,13 @@ +#ifndef _bfin_simple_timer_h_ +#define _bfin_simple_timer_h_ + +#include <linux/ioctl.h> + +#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't' + +#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2) +#define BFIN_SIMPLE_TIMER_START _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6) +#define BFIN_SIMPLE_TIMER_STOP _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8) +#define BFIN_SIMPLE_TIMER_READ _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10) + +#endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h new file mode 100644 index 00000000000..c76ed8def30 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -0,0 +1,175 @@ +/* + * File: include/asm-blackfin/bfin_sport.h + * Based on: + * Author: Roy Huang (roy.huang@analog.com) + * + * Created: Thu Aug. 24 2006 + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __BFIN_SPORT_H__ +#define __BFIN_SPORT_H__ + +#define SPORT_MAJOR 237 +#define SPORT_NR_DEVS 2 + +/* Sport mode: it can be set to TDM, i2s or others */ +#define NORM_MODE 0x0 +#define TDM_MODE 0x1 +#define I2S_MODE 0x2 + +/* Data format, normal, a-law or u-law */ +#define NORM_FORMAT 0x0 +#define ALAW_FORMAT 0x2 +#define ULAW_FORMAT 0x3 +struct sport_register; + +/* Function driver which use sport must initialize the structure */ +struct sport_config { + /*TDM (multichannels), I2S or other mode */ + unsigned int mode:3; + + /* if TDM mode is selected, channels must be set */ + int channels; /* Must be in 8 units */ + unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ + + /* I2S mode */ + unsigned int right_first:1; /* Right stereo channel first */ + + /* In mormal mode, the following item need to be set */ + unsigned int lsb_first:1; /* order of transmit or receive data */ + unsigned int fsync:1; /* Frame sync required */ + unsigned int data_indep:1; /* data independent frame sync generated */ + unsigned int act_low:1; /* Active low TFS */ + unsigned int late_fsync:1; /* Late frame sync */ + unsigned int tckfe:1; + unsigned int sec_en:1; /* Secondary side enabled */ + + /* Choose clock source */ + unsigned int int_clk:1; /* Internal or external clock */ + + /* If external clock is used, the following fields are ignored */ + int serial_clk; + int fsync_clk; + + unsigned int data_format:2; /*Normal, u-law or a-law */ + + int word_len; /* How length of the word in bits, 3-32 bits */ + int dma_enabled; +}; + +struct sport_register { + unsigned short tcr1; + unsigned short reserved0; + unsigned short tcr2; + unsigned short reserved1; + unsigned short tclkdiv; + unsigned short reserved2; + unsigned short tfsdiv; + unsigned short reserved3; + unsigned long tx; + unsigned long reserved_l0; + unsigned long rx; + unsigned long reserved_l1; + unsigned short rcr1; + unsigned short reserved4; + unsigned short rcr2; + unsigned short reserved5; + unsigned short rclkdiv; + unsigned short reserved6; + unsigned short rfsdiv; + unsigned short reserved7; + unsigned short stat; + unsigned short reserved8; + unsigned short chnl; + unsigned short reserved9; + unsigned short mcmc1; + unsigned short reserved10; + unsigned short mcmc2; + unsigned short reserved11; + unsigned long mtcs0; + unsigned long mtcs1; + unsigned long mtcs2; + unsigned long mtcs3; + unsigned long mrcs0; + unsigned long mrcs1; + unsigned long mrcs2; + unsigned long mrcs3; +}; + +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + +/* Test purpose */ +#define ENABLE_AD73311 _IOWR('P', 0x02, int) + +struct sport_dev { + struct cdev cdev; /* Char device structure */ + + int sport_num; + + int dma_rx_chan; + int dma_tx_chan; + + int rx_irq; + unsigned char *rx_buf; /* Buffer store the received data */ + int rx_len; /* How many bytes will be received */ + int rx_received; /* How many bytes has been received */ + + int tx_irq; + const unsigned char *tx_buf; + int tx_len; + int tx_sent; + + int sport_err_irq; + + struct mutex mutex; /* mutual exclusion semaphore */ + struct task_struct *task; + + wait_queue_head_t waitq; + int wait_con; + struct sport_register *regs; + struct sport_config config; +}; + +#define SPORT_TCR1 0 +#define SPORT_TCR2 1 +#define SPORT_TCLKDIV 2 +#define SPORT_TFSDIV 3 +#define SPORT_RCR1 8 +#define SPORT_RCR2 9 +#define SPORT_RCLKDIV 10 +#define SPORT_RFSDIV 11 +#define SPORT_CHANNEL 13 +#define SPORT_MCMC1 14 +#define SPORT_MCMC2 15 +#define SPORT_MTCS0 16 +#define SPORT_MTCS1 17 +#define SPORT_MTCS2 18 +#define SPORT_MTCS3 19 +#define SPORT_MRCS0 20 +#define SPORT_MRCS1 21 +#define SPORT_MRCS2 22 +#define SPORT_MRCS3 23 + +#endif /*__BFIN_SPORT_H__*/ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h new file mode 100644 index 00000000000..b39a175c79c --- /dev/null +++ b/arch/blackfin/include/asm/bitops.h @@ -0,0 +1,218 @@ +#ifndef _BLACKFIN_BITOPS_H +#define _BLACKFIN_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include <linux/compiler.h> +#include <asm/byteorder.h> /* swab32 */ +#include <asm/system.h> /* save_flags */ + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/ffz.h> + +static __inline__ void set_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static __inline__ void __set_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + unsigned long flags; + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a &= ~mask; +} + +static __inline__ void change_bit(int nr, volatile unsigned long *addr) +{ + int mask, flags; + unsigned long *ADDR = (unsigned long *)addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + local_irq_save(flags); + *ADDR ^= mask; + local_irq_restore(flags); +} + +static __inline__ void __change_bit(int nr, volatile unsigned long *addr) +{ + int mask; + unsigned long *ADDR = (unsigned long *)addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + *ADDR ^= mask; +} + +static __inline__ int test_and_set_bit(int nr, void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + return retval; +} + +static __inline__ int __test_and_change_bit(int nr, + volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, const void *addr) +{ + return ((1UL << (nr & 31)) & + (((const volatile unsigned int *)addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, const void *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> + +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/ext2-non-atomic.h> + +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/fls64.h> + +#endif /* _BLACKFIN_BITOPS_H */ diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h new file mode 100644 index 00000000000..8749b0e321a --- /dev/null +++ b/arch/blackfin/include/asm/blackfin.h @@ -0,0 +1,92 @@ +/* + * Common header file for blackfin family of processors. + * + */ + +#ifndef _BLACKFIN_H_ +#define _BLACKFIN_H_ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +#include <mach/anomaly.h> + +#ifndef __ASSEMBLY__ + +/* SSYNC implementation for C file */ +static inline void SSYNC(void) +{ + int _tmp; + if (ANOMALY_05000312) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "ssync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "ssync;" + ); + else + __asm__ __volatile__("ssync;"); +} + +/* CSYNC implementation for C file */ +static inline void CSYNC(void) +{ + int _tmp; + if (ANOMALY_05000312) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "csync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "csync;" + ); + else + __asm__ __volatile__("csync;"); +} + +#else /* __ASSEMBLY__ */ + +/* SSYNC & CSYNC implementations for assembly files */ + +#define ssync(x) SSYNC(x) +#define csync(x) CSYNC(x) + +#if ANOMALY_05000312 +#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; +#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; + +#elif ANOMALY_05000244 +#define SSYNC(scratch) nop; nop; nop; SSYNC; +#define CSYNC(scratch) nop; nop; nop; CSYNC; + +#else +#define SSYNC(scratch) SSYNC; +#define CSYNC(scratch) CSYNC; + +#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */ + +#endif /* __ASSEMBLY__ */ + +#include <mach/blackfin.h> +#include <asm/bfin-global.h> + +#endif /* _BLACKFIN_H_ */ diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h new file mode 100644 index 00000000000..6d3e11b1fc5 --- /dev/null +++ b/arch/blackfin/include/asm/bug.h @@ -0,0 +1,17 @@ +#ifndef _BLACKFIN_BUG_H +#define _BLACKFIN_BUG_H + +#ifdef CONFIG_BUG +#define HAVE_ARCH_BUG + +#define BUG() do { \ + dump_bfin_trace_buffer(); \ + printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + panic("BUG!"); \ +} while (0) + +#endif + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h new file mode 100644 index 00000000000..9093c9c1fb8 --- /dev/null +++ b/arch/blackfin/include/asm/bugs.h @@ -0,0 +1,16 @@ +/* + * include/asm-blackfin/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h new file mode 100644 index 00000000000..6a673d42da1 --- /dev/null +++ b/arch/blackfin/include/asm/byteorder.h @@ -0,0 +1,48 @@ +#ifndef _BLACKFIN_BYTEORDER_H +#define _BLACKFIN_BYTEORDER_H + +#include <asm/types.h> +#include <linux/compiler.h> + +#ifdef __GNUC__ + +static __inline__ __attribute_const__ __u32 ___arch__swahb32(__u32 xx) +{ + __u32 tmp; + __asm__("%1 = %0 >> 8 (V);\n\t" + "%0 = %0 << 8 (V);\n\t" + "%0 = %0 | %1;\n\t" + : "+d"(xx), "=&d"(tmp)); + return xx; +} + +static __inline__ __attribute_const__ __u32 ___arch__swahw32(__u32 xx) +{ + __u32 rv; + __asm__("%0 = PACK(%1.L, %1.H);\n\t": "=d"(rv): "d"(xx)); + return rv; +} + +#define __arch__swahb32(x) ___arch__swahb32(x) +#define __arch__swahw32(x) ___arch__swahw32(x) +#define __arch__swab32(x) ___arch__swahb32(___arch__swahw32(x)) + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 xx) +{ + __u32 xw = xx; + __asm__("%0 <<= 8;\n %0.L = %0.L + %0.H (NS);\n": "+d"(xw)); + return (__u16)xw; +} + +#define __arch__swab16(x) ___arch__swab16(x) + +#endif + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include <linux/byteorder/little_endian.h> + +#endif /* _BLACKFIN_BYTEORDER_H */ diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h new file mode 100644 index 00000000000..023d72133b5 --- /dev/null +++ b/arch/blackfin/include/asm/cache.h @@ -0,0 +1,29 @@ +/* + * include/asm-blackfin/cache.h + */ +#ifndef __ARCH_BLACKFIN_CACHE_H +#define __ARCH_BLACKFIN_CACHE_H + +/* + * Bytes per L1 cache line + * Blackfin loads 32 bytes for cache + */ +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +/* + * Put cacheline_aliged data to L1 data memory + */ +#ifdef CONFIG_CACHELINE_ALIGNED_L1 +#define __cacheline_aligned \ + __attribute__((__aligned__(L1_CACHE_BYTES), \ + __section__(".data_l1.cacheline_aligned"))) +#endif + +/* + * largest L1 which this arch supports + */ +#define L1_CACHE_SHIFT_MAX 5 + +#endif diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h new file mode 100644 index 00000000000..d81a77545a0 --- /dev/null +++ b/arch/blackfin/include/asm/cacheflush.h @@ -0,0 +1,90 @@ +/* + * File: include/asm-blackfin/cacheflush.h + * Based on: include/asm-m68knommu/cacheflush.h + * Author: LG Soft India + * Copyright (C) 2004 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: Blackfin low-level cache routines adapted from the i386 + * and PPC versions by Greg Ungerer (gerg@snapgear.com) + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_CACHEFLUSH_H +#define _BLACKFIN_CACHEFLUSH_H + +#include <asm/cplb.h> + +extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int); +extern void blackfin_icache_flush_range(unsigned int, unsigned int); +extern void blackfin_dcache_flush_range(unsigned int, unsigned int); +extern void blackfin_dcache_invalidate_range(unsigned int, unsigned int); +extern void blackfin_dflush_page(void *); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +static inline void flush_icache_range(unsigned start, unsigned end) +{ +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) + +# if defined(CONFIG_BFIN_WT) + blackfin_icache_flush_range((start), (end)); +# else + blackfin_icache_dcache_flush_range((start), (end)); +# endif + +#else + +# if defined(CONFIG_BFIN_ICACHE) + blackfin_icache_flush_range((start), (end)); +# endif +# if defined(CONFIG_BFIN_DCACHE) + blackfin_dcache_flush_range((start), (end)); +# endif + +#endif +} + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy(dst, src, len); \ + flush_icache_range ((unsigned) (dst), (unsigned) (dst) + (len)); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) + +#if defined(CONFIG_BFIN_DCACHE) +# define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end)) +#else +# define invalidate_dcache_range(start,end) do { } while (0) +#endif +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB) +# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) +# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) +#else +# define flush_dcache_range(start,end) do { } while (0) +# define flush_dcache_page(page) do { } while (0) +#endif + +#endif /* _BLACKFIN_ICACHEFLUSH_H */ diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h new file mode 100644 index 00000000000..35f841bce57 --- /dev/null +++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h @@ -0,0 +1,328 @@ + /* + * File: include/asm-blackfin/mach-common/cdef_LPBlackfin.h + * Based on: + * Author: unknown + * COPYRIGHT 2005 Analog Devices + * Created: ? + * Description: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_LPBLACKFIN_H +#define _CDEF_LPBLACKFIN_H + +/*#if !defined(__ADSPLPBLACKFIN__) +#warning cdef_LPBlackfin.h should only be included for 532 compatible chips. +#endif +*/ +#include <asm/def_LPBlackfin.h> + +/*Cache & SRAM Memory*/ +#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) +#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) +#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) +#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) +#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS) +#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val) +#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR) +#define bfin_write_DCPLB_FAULT_ADDR(val) bfin_write32(DCPLB_FAULT_ADDR,val) +/* +#define MMR_TIMEOUT 0xFFE00010 +*/ +#define bfin_read_DCPLB_ADDR0() bfin_read32(DCPLB_ADDR0) +#define bfin_write_DCPLB_ADDR0(val) bfin_write32(DCPLB_ADDR0,val) +#define bfin_read_DCPLB_ADDR1() bfin_read32(DCPLB_ADDR1) +#define bfin_write_DCPLB_ADDR1(val) bfin_write32(DCPLB_ADDR1,val) +#define bfin_read_DCPLB_ADDR2() bfin_read32(DCPLB_ADDR2) +#define bfin_write_DCPLB_ADDR2(val) bfin_write32(DCPLB_ADDR2,val) +#define bfin_read_DCPLB_ADDR3() bfin_read32(DCPLB_ADDR3) +#define bfin_write_DCPLB_ADDR3(val) bfin_write32(DCPLB_ADDR3,val) +#define bfin_read_DCPLB_ADDR4() bfin_read32(DCPLB_ADDR4) +#define bfin_write_DCPLB_ADDR4(val) bfin_write32(DCPLB_ADDR4,val) +#define bfin_read_DCPLB_ADDR5() bfin_read32(DCPLB_ADDR5) +#define bfin_write_DCPLB_ADDR5(val) bfin_write32(DCPLB_ADDR5,val) +#define bfin_read_DCPLB_ADDR6() bfin_read32(DCPLB_ADDR6) +#define bfin_write_DCPLB_ADDR6(val) bfin_write32(DCPLB_ADDR6,val) +#define bfin_read_DCPLB_ADDR7() bfin_read32(DCPLB_ADDR7) +#define bfin_write_DCPLB_ADDR7(val) bfin_write32(DCPLB_ADDR7,val) +#define bfin_read_DCPLB_ADDR8() bfin_read32(DCPLB_ADDR8) +#define bfin_write_DCPLB_ADDR8(val) bfin_write32(DCPLB_ADDR8,val) +#define bfin_read_DCPLB_ADDR9() bfin_read32(DCPLB_ADDR9) +#define bfin_write_DCPLB_ADDR9(val) bfin_write32(DCPLB_ADDR9,val) +#define bfin_read_DCPLB_ADDR10() bfin_read32(DCPLB_ADDR10) +#define bfin_write_DCPLB_ADDR10(val) bfin_write32(DCPLB_ADDR10,val) +#define bfin_read_DCPLB_ADDR11() bfin_read32(DCPLB_ADDR11) +#define bfin_write_DCPLB_ADDR11(val) bfin_write32(DCPLB_ADDR11,val) +#define bfin_read_DCPLB_ADDR12() bfin_read32(DCPLB_ADDR12) +#define bfin_write_DCPLB_ADDR12(val) bfin_write32(DCPLB_ADDR12,val) +#define bfin_read_DCPLB_ADDR13() bfin_read32(DCPLB_ADDR13) +#define bfin_write_DCPLB_ADDR13(val) bfin_write32(DCPLB_ADDR13,val) +#define bfin_read_DCPLB_ADDR14() bfin_read32(DCPLB_ADDR14) +#define bfin_write_DCPLB_ADDR14(val) bfin_write32(DCPLB_ADDR14,val) +#define bfin_read_DCPLB_ADDR15() bfin_read32(DCPLB_ADDR15) +#define bfin_write_DCPLB_ADDR15(val) bfin_write32(DCPLB_ADDR15,val) +#define bfin_read_DCPLB_DATA0() bfin_read32(DCPLB_DATA0) +#define bfin_write_DCPLB_DATA0(val) bfin_write32(DCPLB_DATA0,val) +#define bfin_read_DCPLB_DATA1() bfin_read32(DCPLB_DATA1) +#define bfin_write_DCPLB_DATA1(val) bfin_write32(DCPLB_DATA1,val) +#define bfin_read_DCPLB_DATA2() bfin_read32(DCPLB_DATA2) +#define bfin_write_DCPLB_DATA2(val) bfin_write32(DCPLB_DATA2,val) +#define bfin_read_DCPLB_DATA3() bfin_read32(DCPLB_DATA3) +#define bfin_write_DCPLB_DATA3(val) bfin_write32(DCPLB_DATA3,val) +#define bfin_read_DCPLB_DATA4() bfin_read32(DCPLB_DATA4) +#define bfin_write_DCPLB_DATA4(val) bfin_write32(DCPLB_DATA4,val) +#define bfin_read_DCPLB_DATA5() bfin_read32(DCPLB_DATA5) +#define bfin_write_DCPLB_DATA5(val) bfin_write32(DCPLB_DATA5,val) +#define bfin_read_DCPLB_DATA6() bfin_read32(DCPLB_DATA6) +#define bfin_write_DCPLB_DATA6(val) bfin_write32(DCPLB_DATA6,val) +#define bfin_read_DCPLB_DATA7() bfin_read32(DCPLB_DATA7) +#define bfin_write_DCPLB_DATA7(val) bfin_write32(DCPLB_DATA7,val) +#define bfin_read_DCPLB_DATA8() bfin_read32(DCPLB_DATA8) +#define bfin_write_DCPLB_DATA8(val) bfin_write32(DCPLB_DATA8,val) +#define bfin_read_DCPLB_DATA9() bfin_read32(DCPLB_DATA9) +#define bfin_write_DCPLB_DATA9(val) bfin_write32(DCPLB_DATA9,val) +#define bfin_read_DCPLB_DATA10() bfin_read32(DCPLB_DATA10) +#define bfin_write_DCPLB_DATA10(val) bfin_write32(DCPLB_DATA10,val) +#define bfin_read_DCPLB_DATA11() bfin_read32(DCPLB_DATA11) +#define bfin_write_DCPLB_DATA11(val) bfin_write32(DCPLB_DATA11,val) +#define bfin_read_DCPLB_DATA12() bfin_read32(DCPLB_DATA12) +#define bfin_write_DCPLB_DATA12(val) bfin_write32(DCPLB_DATA12,val) +#define bfin_read_DCPLB_DATA13() bfin_read32(DCPLB_DATA13) +#define bfin_write_DCPLB_DATA13(val) bfin_write32(DCPLB_DATA13,val) +#define bfin_read_DCPLB_DATA14() bfin_read32(DCPLB_DATA14) +#define bfin_write_DCPLB_DATA14(val) bfin_write32(DCPLB_DATA14,val) +#define bfin_read_DCPLB_DATA15() bfin_read32(DCPLB_DATA15) +#define bfin_write_DCPLB_DATA15(val) bfin_write32(DCPLB_DATA15,val) +#define bfin_read_DTEST_COMMAND() bfin_read32(DTEST_COMMAND) +#define bfin_write_DTEST_COMMAND(val) bfin_write32(DTEST_COMMAND,val) +/* +#define DTEST_INDEX 0xFFE00304 +*/ +#define bfin_read_DTEST_DATA0() bfin_read32(DTEST_DATA0) +#define bfin_write_DTEST_DATA0(val) bfin_write32(DTEST_DATA0,val) +#define bfin_read_DTEST_DATA1() bfin_read32(DTEST_DATA1) +#define bfin_write_DTEST_DATA1(val) bfin_write32(DTEST_DATA1,val) +/* +#define DTEST_DATA2 0xFFE00408 +#define DTEST_DATA3 0xFFE0040C +*/ +#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) +#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) +#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS) +#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val) +#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR) +#define bfin_write_ICPLB_FAULT_ADDR(val) bfin_write32(ICPLB_FAULT_ADDR,val) +#define bfin_read_ICPLB_ADDR0() bfin_read32(ICPLB_ADDR0) +#define bfin_write_ICPLB_ADDR0(val) bfin_write32(ICPLB_ADDR0,val) +#define bfin_read_ICPLB_ADDR1() bfin_read32(ICPLB_ADDR1) +#define bfin_write_ICPLB_ADDR1(val) bfin_write32(ICPLB_ADDR1,val) +#define bfin_read_ICPLB_ADDR2() bfin_read32(ICPLB_ADDR2) +#define bfin_write_ICPLB_ADDR2(val) bfin_write32(ICPLB_ADDR2,val) +#define bfin_read_ICPLB_ADDR3() bfin_read32(ICPLB_ADDR3) +#define bfin_write_ICPLB_ADDR3(val) bfin_write32(ICPLB_ADDR3,val) +#define bfin_read_ICPLB_ADDR4() bfin_read32(ICPLB_ADDR4) +#define bfin_write_ICPLB_ADDR4(val) bfin_write32(ICPLB_ADDR4,val) +#define bfin_read_ICPLB_ADDR5() bfin_read32(ICPLB_ADDR5) +#define bfin_write_ICPLB_ADDR5(val) bfin_write32(ICPLB_ADDR5,val) +#define bfin_read_ICPLB_ADDR6() bfin_read32(ICPLB_ADDR6) +#define bfin_write_ICPLB_ADDR6(val) bfin_write32(ICPLB_ADDR6,val) +#define bfin_read_ICPLB_ADDR7() bfin_read32(ICPLB_ADDR7) +#define bfin_write_ICPLB_ADDR7(val) bfin_write32(ICPLB_ADDR7,val) +#define bfin_read_ICPLB_ADDR8() bfin_read32(ICPLB_ADDR8) +#define bfin_write_ICPLB_ADDR8(val) bfin_write32(ICPLB_ADDR8,val) +#define bfin_read_ICPLB_ADDR9() bfin_read32(ICPLB_ADDR9) +#define bfin_write_ICPLB_ADDR9(val) bfin_write32(ICPLB_ADDR9,val) +#define bfin_read_ICPLB_ADDR10() bfin_read32(ICPLB_ADDR10) +#define bfin_write_ICPLB_ADDR10(val) bfin_write32(ICPLB_ADDR10,val) +#define bfin_read_ICPLB_ADDR11() bfin_read32(ICPLB_ADDR11) +#define bfin_write_ICPLB_ADDR11(val) bfin_write32(ICPLB_ADDR11,val) +#define bfin_read_ICPLB_ADDR12() bfin_read32(ICPLB_ADDR12) +#define bfin_write_ICPLB_ADDR12(val) bfin_write32(ICPLB_ADDR12,val) +#define bfin_read_ICPLB_ADDR13() bfin_read32(ICPLB_ADDR13) +#define bfin_write_ICPLB_ADDR13(val) bfin_write32(ICPLB_ADDR13,val) +#define bfin_read_ICPLB_ADDR14() bfin_read32(ICPLB_ADDR14) +#define bfin_write_ICPLB_ADDR14(val) bfin_write32(ICPLB_ADDR14,val) +#define bfin_read_ICPLB_ADDR15() bfin_read32(ICPLB_ADDR15) +#define bfin_write_ICPLB_ADDR15(val) bfin_write32(ICPLB_ADDR15,val) +#define bfin_read_ICPLB_DATA0() bfin_read32(ICPLB_DATA0) +#define bfin_write_ICPLB_DATA0(val) bfin_write32(ICPLB_DATA0,val) +#define bfin_read_ICPLB_DATA1() bfin_read32(ICPLB_DATA1) +#define bfin_write_ICPLB_DATA1(val) bfin_write32(ICPLB_DATA1,val) +#define bfin_read_ICPLB_DATA2() bfin_read32(ICPLB_DATA2) +#define bfin_write_ICPLB_DATA2(val) bfin_write32(ICPLB_DATA2,val) +#define bfin_read_ICPLB_DATA3() bfin_read32(ICPLB_DATA3) +#define bfin_write_ICPLB_DATA3(val) bfin_write32(ICPLB_DATA3,val) +#define bfin_read_ICPLB_DATA4() bfin_read32(ICPLB_DATA4) +#define bfin_write_ICPLB_DATA4(val) bfin_write32(ICPLB_DATA4,val) +#define bfin_read_ICPLB_DATA5() bfin_read32(ICPLB_DATA5) +#define bfin_write_ICPLB_DATA5(val) bfin_write32(ICPLB_DATA5,val) +#define bfin_read_ICPLB_DATA6() bfin_read32(ICPLB_DATA6) +#define bfin_write_ICPLB_DATA6(val) bfin_write32(ICPLB_DATA6,val) +#define bfin_read_ICPLB_DATA7() bfin_read32(ICPLB_DATA7) +#define bfin_write_ICPLB_DATA7(val) bfin_write32(ICPLB_DATA7,val) +#define bfin_read_ICPLB_DATA8() bfin_read32(ICPLB_DATA8) +#define bfin_write_ICPLB_DATA8(val) bfin_write32(ICPLB_DATA8,val) +#define bfin_read_ICPLB_DATA9() bfin_read32(ICPLB_DATA9) +#define bfin_write_ICPLB_DATA9(val) bfin_write32(ICPLB_DATA9,val) +#define bfin_read_ICPLB_DATA10() bfin_read32(ICPLB_DATA10) +#define bfin_write_ICPLB_DATA10(val) bfin_write32(ICPLB_DATA10,val) +#define bfin_read_ICPLB_DATA11() bfin_read32(ICPLB_DATA11) +#define bfin_write_ICPLB_DATA11(val) bfin_write32(ICPLB_DATA11,val) +#define bfin_read_ICPLB_DATA12() bfin_read32(ICPLB_DATA12) +#define bfin_write_ICPLB_DATA12(val) bfin_write32(ICPLB_DATA12,val) +#define bfin_read_ICPLB_DATA13() bfin_read32(ICPLB_DATA13) +#define bfin_write_ICPLB_DATA13(val) bfin_write32(ICPLB_DATA13,val) +#define bfin_read_ICPLB_DATA14() bfin_read32(ICPLB_DATA14) +#define bfin_write_ICPLB_DATA14(val) bfin_write32(ICPLB_DATA14,val) +#define bfin_read_ICPLB_DATA15() bfin_read32(ICPLB_DATA15) +#define bfin_write_ICPLB_DATA15(val) bfin_write32(ICPLB_DATA15,val) +#define bfin_read_ITEST_COMMAND() bfin_read32(ITEST_COMMAND) +#define bfin_write_ITEST_COMMAND(val) bfin_write32(ITEST_COMMAND,val) +#if 0 +#define ITEST_INDEX 0xFFE01304 /* Instruction Test Index Register */ +#endif +#define bfin_read_ITEST_DATA0() bfin_read32(ITEST_DATA0) +#define bfin_write_ITEST_DATA0(val) bfin_write32(ITEST_DATA0,val) +#define bfin_read_ITEST_DATA1() bfin_read32(ITEST_DATA1) +#define bfin_write_ITEST_DATA1(val) bfin_write32(ITEST_DATA1,val) + +/* Event/Interrupt Registers*/ + +#define bfin_read_EVT0() bfin_read32(EVT0) +#define bfin_write_EVT0(val) bfin_write32(EVT0,val) +#define bfin_read_EVT1() bfin_read32(EVT1) +#define bfin_write_EVT1(val) bfin_write32(EVT1,val) +#define bfin_read_EVT2() bfin_read32(EVT2) +#define bfin_write_EVT2(val) bfin_write32(EVT2,val) +#define bfin_read_EVT3() bfin_read32(EVT3) +#define bfin_write_EVT3(val) bfin_write32(EVT3,val) +#define bfin_read_EVT4() bfin_read32(EVT4) +#define bfin_write_EVT4(val) bfin_write32(EVT4,val) +#define bfin_read_EVT5() bfin_read32(EVT5) +#define bfin_write_EVT5(val) bfin_write32(EVT5,val) +#define bfin_read_EVT6() bfin_read32(EVT6) +#define bfin_write_EVT6(val) bfin_write32(EVT6,val) +#define bfin_read_EVT7() bfin_read32(EVT7) +#define bfin_write_EVT7(val) bfin_write32(EVT7,val) +#define bfin_read_EVT8() bfin_read32(EVT8) +#define bfin_write_EVT8(val) bfin_write32(EVT8,val) +#define bfin_read_EVT9() bfin_read32(EVT9) +#define bfin_write_EVT9(val) bfin_write32(EVT9,val) +#define bfin_read_EVT10() bfin_read32(EVT10) +#define bfin_write_EVT10(val) bfin_write32(EVT10,val) +#define bfin_read_EVT11() bfin_read32(EVT11) +#define bfin_write_EVT11(val) bfin_write32(EVT11,val) +#define bfin_read_EVT12() bfin_read32(EVT12) +#define bfin_write_EVT12(val) bfin_write32(EVT12,val) +#define bfin_read_EVT13() bfin_read32(EVT13) +#define bfin_write_EVT13(val) bfin_write32(EVT13,val) +#define bfin_read_EVT14() bfin_read32(EVT14) +#define bfin_write_EVT14(val) bfin_write32(EVT14,val) +#define bfin_read_EVT15() bfin_read32(EVT15) +#define bfin_write_EVT15(val) bfin_write32(EVT15,val) +#define bfin_read_IMASK() bfin_read32(IMASK) +#define bfin_write_IMASK(val) bfin_write32(IMASK,val) +#define bfin_read_IPEND() bfin_read32(IPEND) +#define bfin_write_IPEND(val) bfin_write32(IPEND,val) +#define bfin_read_ILAT() bfin_read32(ILAT) +#define bfin_write_ILAT(val) bfin_write32(ILAT,val) + +/*Core Timer Registers*/ +#define bfin_read_TCNTL() bfin_read32(TCNTL) +#define bfin_write_TCNTL(val) bfin_write32(TCNTL,val) +#define bfin_read_TPERIOD() bfin_read32(TPERIOD) +#define bfin_write_TPERIOD(val) bfin_write32(TPERIOD,val) +#define bfin_read_TSCALE() bfin_read32(TSCALE) +#define bfin_write_TSCALE(val) bfin_write32(TSCALE,val) +#define bfin_read_TCOUNT() bfin_read32(TCOUNT) +#define bfin_write_TCOUNT(val) bfin_write32(TCOUNT,val) + +/*Debug/MP/Emulation Registers*/ +#define bfin_read_DSPID() bfin_read32(DSPID) +#define bfin_write_DSPID(val) bfin_write32(DSPID,val) +#define bfin_read_DBGCTL() bfin_read32(DBGCTL) +#define bfin_write_DBGCTL(val) bfin_write32(DBGCTL,val) +#define bfin_read_DBGSTAT() bfin_read32(DBGSTAT) +#define bfin_write_DBGSTAT(val) bfin_write32(DBGSTAT,val) +#define bfin_read_EMUDAT() bfin_read32(EMUDAT) +#define bfin_write_EMUDAT(val) bfin_write32(EMUDAT,val) + +/*Trace Buffer Registers*/ +#define bfin_read_TBUFCTL() bfin_read32(TBUFCTL) +#define bfin_write_TBUFCTL(val) bfin_write32(TBUFCTL,val) +#define bfin_read_TBUFSTAT() bfin_read32(TBUFSTAT) +#define bfin_write_TBUFSTAT(val) bfin_write32(TBUFSTAT,val) +#define bfin_read_TBUF() bfin_read32(TBUF) +#define bfin_write_TBUF(val) bfin_write32(TBUF,val) + +/*Watch Point Control Registers*/ +#define bfin_read_WPIACTL() bfin_read32(WPIACTL) +#define bfin_write_WPIACTL(val) bfin_write32(WPIACTL,val) +#define bfin_read_WPIA0() bfin_read32(WPIA0) +#define bfin_write_WPIA0(val) bfin_write32(WPIA0,val) +#define bfin_read_WPIA1() bfin_read32(WPIA1) +#define bfin_write_WPIA1(val) bfin_write32(WPIA1,val) +#define bfin_read_WPIA2() bfin_read32(WPIA2) +#define bfin_write_WPIA2(val) bfin_write32(WPIA2,val) +#define bfin_read_WPIA3() bfin_read32(WPIA3) +#define bfin_write_WPIA3(val) bfin_write32(WPIA3,val) +#define bfin_read_WPIA4() bfin_read32(WPIA4) +#define bfin_write_WPIA4(val) bfin_write32(WPIA4,val) +#define bfin_read_WPIA5() bfin_read32(WPIA5) +#define bfin_write_WPIA5(val) bfin_write32(WPIA5,val) +#define bfin_read_WPIACNT0() bfin_read32(WPIACNT0) +#define bfin_write_WPIACNT0(val) bfin_write32(WPIACNT0,val) +#define bfin_read_WPIACNT1() bfin_read32(WPIACNT1) +#define bfin_write_WPIACNT1(val) bfin_write32(WPIACNT1,val) +#define bfin_read_WPIACNT2() bfin_read32(WPIACNT2) +#define bfin_write_WPIACNT2(val) bfin_write32(WPIACNT2,val) +#define bfin_read_WPIACNT3() bfin_read32(WPIACNT3) +#define bfin_write_WPIACNT3(val) bfin_write32(WPIACNT3,val) +#define bfin_read_WPIACNT4() bfin_read32(WPIACNT4) +#define bfin_write_WPIACNT4(val) bfin_write32(WPIACNT4,val) +#define bfin_read_WPIACNT5() bfin_read32(WPIACNT5) +#define bfin_write_WPIACNT5(val) bfin_write32(WPIACNT5,val) +#define bfin_read_WPDACTL() bfin_read32(WPDACTL) +#define bfin_write_WPDACTL(val) bfin_write32(WPDACTL,val) +#define bfin_read_WPDA0() bfin_read32(WPDA0) +#define bfin_write_WPDA0(val) bfin_write32(WPDA0,val) +#define bfin_read_WPDA1() bfin_read32(WPDA1) +#define bfin_write_WPDA1(val) bfin_write32(WPDA1,val) +#define bfin_read_WPDACNT0() bfin_read32(WPDACNT0) +#define bfin_write_WPDACNT0(val) bfin_write32(WPDACNT0,val) +#define bfin_read_WPDACNT1() bfin_read32(WPDACNT1) +#define bfin_write_WPDACNT1(val) bfin_write32(WPDACNT1,val) +#define bfin_read_WPSTAT() bfin_read32(WPSTAT) +#define bfin_write_WPSTAT(val) bfin_write32(WPSTAT,val) + +/*Performance Monitor Registers*/ +#define bfin_read_PFCTL() bfin_read32(PFCTL) +#define bfin_write_PFCTL(val) bfin_write32(PFCTL,val) +#define bfin_read_PFCNTR0() bfin_read32(PFCNTR0) +#define bfin_write_PFCNTR0(val) bfin_write32(PFCNTR0,val) +#define bfin_read_PFCNTR1() bfin_read32(PFCNTR1) +#define bfin_write_PFCNTR1(val) bfin_write32(PFCNTR1,val) + +/* +#define IPRIO 0xFFE02110 +*/ + +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h new file mode 100644 index 00000000000..6f6af2b8e9e --- /dev/null +++ b/arch/blackfin/include/asm/checksum.h @@ -0,0 +1,100 @@ +#ifndef _BFIN_CHECKSUM_H +#define _BFIN_CHECKSUM_H + +/* + * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com + * + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy(const void *src, void *dst, + int len, __wsum sum); + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err); + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy((src), (dst), (len), (sum)) + +__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + while (sum >> 16) + sum = (sum & 0xffff) + (sum >> 16); + return ((~(sum << 16)) >> 16); +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + + __asm__ ("%0 = %0 + %1;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "NOP;\n\t" + : "=d" (sum) + : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)); + + return (sum); +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern __sum16 ip_compute_csum(const void *buff, int len); + +#endif /* _BFIN_CHECKSUM_H */ diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h new file mode 100644 index 00000000000..033bba92d61 --- /dev/null +++ b/arch/blackfin/include/asm/clocks.h @@ -0,0 +1,70 @@ +/* + * File: include/asm-blackfin/mach-common/clocks.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 25Jul07 + * Description: Common Clock definitions for various kernel files + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BFIN_CLOCKS_H +#define _BFIN_CLOCKS_H + +#ifdef CONFIG_CCLK_DIV_1 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# define CONFIG_CCLK_DIV 1 +#endif + +#ifdef CONFIG_CCLK_DIV_2 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# define CONFIG_CCLK_DIV 2 +#endif + +#ifdef CONFIG_CCLK_DIV_4 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# define CONFIG_CCLK_DIV 4 +#endif + +#ifdef CONFIG_CCLK_DIV_8 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# define CONFIG_CCLK_DIV 8 +#endif + +#ifndef CONFIG_PLL_BYPASS +# ifndef CONFIG_CLKIN_HALF +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +# endif + +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) + +#else +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_CCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_SCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_VCO_MULT 0 +#endif + +#endif diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S new file mode 100644 index 00000000000..c0e630edfb9 --- /dev/null +++ b/arch/blackfin/include/asm/context.S @@ -0,0 +1,355 @@ +/* + * File: arch/blackfin/kernel/context.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + +/* + * Code to save processor context. + * We even save the register which are preserved by a function call + * - r4, r5, r6, r7, p3, p4, p5 + */ +.macro save_context_with_interrupts + [--sp] = SYSCFG; + + [--sp] = P0; /*orig_p0*/ + [--sp] = R0; /*orig_r0*/ + + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r0; /* Skip IPEND as well. */ + /* Switch to other method of keeping interrupts disabled. */ +#ifdef CONFIG_DEBUG_HWERR + r0 = 0x3f; + sti r0; +#else + cli r0; +#endif + [--sp] = RETI; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro save_context_syscall + [--sp] = SYSCFG; + + [--sp] = P0; /*orig_p0*/ + [--sp] = R0; /*orig_r0*/ + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r0; /* Skip IPEND as well. */ + [--sp] = RETI; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro save_context_no_interrupts + [--sp] = SYSCFG; + [--sp] = P0; /* orig_p0 */ + [--sp] = R0; /* orig_r0 */ + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + +#ifdef CONFIG_KGDB + fp = 0(Z); + r1 = sp; + r1 += 60; + r1 += 60; + r1 += 60; + [--sp] = r1; +#else + [--sp] = r0; /* Skip reserved */ +#endif + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; +#ifdef CONFIG_KGDB + r1.l = lo(IPEND); + r1.h = hi(IPEND); + [--sp] = r1; +#else + [--sp] = r0; /* Skip IPEND as well. */ +#endif + [--sp] = r0; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro restore_context_no_interrupts + sp += 4; /* Skip orig_pc */ + sp += 4; /* Skip IPEND */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; /* Restore RETI indirectly when in exception */ + RETS = [sp++]; + + sp += 4; /* Skip Reserved */ + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 8; /* Skip orig_r0/orig_p0 */ + SYSCFG = [sp++]; +.endm + +.macro restore_context_with_interrupts + sp += 4; /* Skip orig_pc */ + sp += 4; /* Skip IPEND */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + RETI = [sp++]; + RETS = [sp++]; + + p0.h = _irq_flags; + p0.l = _irq_flags; + r0 = [p0]; + sti r0; + + sp += 4; /* Skip Reserved */ + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 8; /* Skip orig_r0/orig_p0 */ + csync; + SYSCFG = [sp++]; + csync; +.endm + diff --git a/arch/blackfin/include/asm/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h new file mode 100644 index 00000000000..75c67b99d60 --- /dev/null +++ b/arch/blackfin/include/asm/cplb-mpu.h @@ -0,0 +1,61 @@ +/* + * File: include/asm-blackfin/cplbinit.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_BFIN_CPLB_MPU_H +#define __ASM_BFIN_CPLB_MPU_H + +struct cplb_entry { + unsigned long data, addr; +}; + +struct mem_region { + unsigned long start, end; + unsigned long dcplb_data; + unsigned long icplb_data; +}; + +extern struct cplb_entry dcplb_tbl[MAX_CPLBS]; +extern struct cplb_entry icplb_tbl[MAX_CPLBS]; +extern int first_switched_icplb; +extern int first_mask_dcplb; +extern int first_switched_dcplb; + +extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +extern int nr_cplb_flush; + +extern int page_mask_order; +extern int page_mask_nelts; + +extern unsigned long *current_rwx_mask; + +extern void flush_switched_cplbs(void); +extern void set_mask_dcplbs(unsigned long *); + +extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *); + +#endif /* __ASM_BFIN_CPLB_MPU_H */ diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h new file mode 100644 index 00000000000..05d6f05fb74 --- /dev/null +++ b/arch/blackfin/include/asm/cplb.h @@ -0,0 +1,110 @@ +/* + * File: include/asm-blackfin/cplb.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org> + * + * Created: 2000 + * Description: Common CPLB definitions for CPLB init + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _CPLB_H +#define _CPLB_H + +#include <asm/blackfin.h> +#include <mach/anomaly.h> + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ + +#if ANOMALY_05000158 +#define ANOMALY_05000158_WORKAROUND 0x200 +#else +#define ANOMALY_05000158_WORKAROUND 0x0 +#endif + +#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) + +#ifdef CONFIG_BFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +#endif + +#define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) +#define L2_MEMORY (CPLB_COMMON) +#define SDRAM_DNON_CHBL (CPLB_COMMON) +#define SDRAM_EBIU (CPLB_COMMON) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#ifdef CONFIG_MPU +#define MAX_CPLBS 16 +#else +#define MAX_CPLBS (16 * 2) +#endif + +#define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ + ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) + +#define CPLB_ENABLE_ICACHE_P 0 +#define CPLB_ENABLE_DCACHE_P 1 +#define CPLB_ENABLE_DCACHE2_P 2 +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated! */ +#define CPLB_ENABLE_ICPLBS_P 4 +#define CPLB_ENABLE_DCPLBS_P 5 + +#define CPLB_ENABLE_ICACHE (1<<CPLB_ENABLE_ICACHE_P) +#define CPLB_ENABLE_DCACHE (1<<CPLB_ENABLE_DCACHE_P) +#define CPLB_ENABLE_DCACHE2 (1<<CPLB_ENABLE_DCACHE2_P) +#define CPLB_ENABLE_CPLBS (1<<CPLB_ENABLE_CPLBS_P) +#define CPLB_ENABLE_ICPLBS (1<<CPLB_ENABLE_ICPLBS_P) +#define CPLB_ENABLE_DCPLBS (1<<CPLB_ENABLE_DCPLBS_P) +#define CPLB_ENABLE_ANY_CPLBS CPLB_ENABLE_CPLBS | \ + CPLB_ENABLE_ICPLBS | \ + CPLB_ENABLE_DCPLBS + +#define CPLB_RELOADED 0x0000 +#define CPLB_NO_UNLOCKED 0x0001 +#define CPLB_NO_ADDR_MATCH 0x0002 +#define CPLB_PROT_VIOL 0x0003 +#define CPLB_UNKNOWN_ERR 0x0004 + +#define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT +#define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY + +#define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID +#define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID +#define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID +#define CPLB_DDOCACHE CPLB_DNOCACHE | CPLB_DEF_CACHE +#define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID +#define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL + +#endif /* _CPLB_H */ diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h new file mode 100644 index 00000000000..0eb1c1b685a --- /dev/null +++ b/arch/blackfin/include/asm/cplbinit.h @@ -0,0 +1,95 @@ +/* + * File: include/asm-blackfin/cplbinit.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_CPLBINIT_H__ +#define __ASM_CPLBINIT_H__ + +#include <asm/blackfin.h> +#include <asm/cplb.h> + +#ifdef CONFIG_MPU + +#include <asm/cplb-mpu.h> + +#else + +#define INITIAL_T 0x1 +#define SWITCH_T 0x2 +#define I_CPLB 0x4 +#define D_CPLB 0x8 + +#define IN_KERNEL 1 + +enum +{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM}; + +struct cplb_desc { + u32 start; /* start address */ + u32 end; /* end address */ + u32 psize; /* prefered size if any otherwise 1MB or 4MB*/ + u16 attr;/* attributes */ + u16 i_conf;/* I-CPLB DATA */ + u16 d_conf;/* D-CPLB DATA */ + u16 valid;/* valid */ + const s8 name[30];/* name */ +}; + +struct cplb_tab { + u_long *tab; + u16 pos; + u16 size; +}; + +extern u_long icplb_table[]; +extern u_long dcplb_table[]; + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ + +extern u_long ipdt_table[]; +extern u_long dpdt_table[]; +#ifdef CONFIG_CPLB_INFO +extern u_long ipdt_swapcount_table[]; +extern u_long dpdt_swapcount_table[]; +#endif + +#endif /* CONFIG_MPU */ + +extern unsigned long reserved_mem_dcache_on; +extern unsigned long reserved_mem_icache_on; + +extern void generate_cpl_tables(void); + +#endif diff --git a/arch/blackfin/include/asm/cpumask.h b/arch/blackfin/include/asm/cpumask.h new file mode 100644 index 00000000000..b20a8e9012c --- /dev/null +++ b/arch/blackfin/include/asm/cpumask.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BLACKFIN_CPUMASK_H +#define _ASM_BLACKFIN_CPUMASK_H + +#include <asm-generic/cpumask.h> + +#endif /* _ASM_BLACKFIN_CPUMASK_H */ diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h new file mode 100644 index 00000000000..2b19705f988 --- /dev/null +++ b/arch/blackfin/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __BLACKFIN_CPUTIME_H +#define __BLACKFIN_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __BLACKFIN_CPUTIME_H */ diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h new file mode 100644 index 00000000000..31918d29122 --- /dev/null +++ b/arch/blackfin/include/asm/current.h @@ -0,0 +1,23 @@ +#ifndef _BLACKFIN_CURRENT_H +#define _BLACKFIN_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com> + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ +#include <linux/thread_info.h> + +struct task_struct; + +static inline struct task_struct *get_current(void) __attribute__ ((__const__)); +static inline struct task_struct *get_current(void) +{ + return (current_thread_info()->task); +} + +#define current (get_current()) + +#endif /* _BLACKFIN_CURRENT_H */ diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h new file mode 100644 index 00000000000..6341eebff3d --- /dev/null +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -0,0 +1,712 @@ + /* + * File: include/asm-blackfin/mach-common/def_LPBlackfin.h + * Based on: + * Author: unknown + * COPYRIGHT 2005 Analog Devices + * Created: ? + * Description: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */ + +#ifndef _DEF_LPBLACKFIN_H +#define _DEF_LPBLACKFIN_H + +#include <mach/anomaly.h> + +#define MK_BMSK_(x) (1<<x) + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +#if ANOMALY_05000198 +# define NOP_PAD_ANOMALY_05000198 "nop;" +#else +# define NOP_PAD_ANOMALY_05000198 +#endif + +#define bfin_read8(addr) ({ \ + uint32_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = b[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read16(addr) ({ \ + uint32_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = w[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read32(addr) ({ \ + uint32_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = [%1];" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_write8(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "b[%0] = %1;" \ + : \ + : "a" (addr), "d" ((uint8_t)(val)) \ + : "memory" \ + ) + +#define bfin_write16(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "w[%0] = %1;" \ + : \ + : "a" (addr), "d" ((uint16_t)(val)) \ + : "memory" \ + ) + +#define bfin_write32(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#endif /* __ASSEMBLY__ */ + +/************************************************** + * System Register Bits + **************************************************/ + +/************************************************** + * ASTAT register + **************************************************/ + +/* definitions of ASTAT bit positions*/ + +/*Result of last ALU0 or shifter operation is zero*/ +#define ASTAT_AZ_P 0x00000000 +/*Result of last ALU0 or shifter operation is negative*/ +#define ASTAT_AN_P 0x00000001 +/*Condition Code, used for holding comparison results*/ +#define ASTAT_CC_P 0x00000005 +/*Quotient Bit*/ +#define ASTAT_AQ_P 0x00000006 +/*Rounding mode, set for biased, clear for unbiased*/ +#define ASTAT_RND_MOD_P 0x00000008 +/*Result of last ALU0 operation generated a carry*/ +#define ASTAT_AC0_P 0x0000000C +/*Result of last ALU0 operation generated a carry*/ +#define ASTAT_AC0_COPY_P 0x00000002 +/*Result of last ALU1 operation generated a carry*/ +#define ASTAT_AC1_P 0x0000000D +/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/ +#define ASTAT_AV0_P 0x00000010 +/*Sticky version of ASTAT_AV0 */ +#define ASTAT_AV0S_P 0x00000011 +/*Result of last MAC1 operation overflowed, sticky for MAC*/ +#define ASTAT_AV1_P 0x00000012 +/*Sticky version of ASTAT_AV1 */ +#define ASTAT_AV1S_P 0x00000013 +/*Result of last ALU0 or MAC0 operation overflowed*/ +#define ASTAT_V_P 0x00000018 +/*Result of last ALU0 or MAC0 operation overflowed*/ +#define ASTAT_V_COPY_P 0x00000003 +/*Sticky version of ASTAT_V*/ +#define ASTAT_VS_P 0x00000019 + +/* Masks */ + +/*Result of last ALU0 or shifter operation is zero*/ +#define ASTAT_AZ MK_BMSK_(ASTAT_AZ_P) +/*Result of last ALU0 or shifter operation is negative*/ +#define ASTAT_AN MK_BMSK_(ASTAT_AN_P) +/*Result of last ALU0 operation generated a carry*/ +#define ASTAT_AC0 MK_BMSK_(ASTAT_AC0_P) +/*Result of last ALU0 operation generated a carry*/ +#define ASTAT_AC0_COPY MK_BMSK_(ASTAT_AC0_COPY_P) +/*Result of last ALU0 operation generated a carry*/ +#define ASTAT_AC1 MK_BMSK_(ASTAT_AC1_P) +/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/ +#define ASTAT_AV0 MK_BMSK_(ASTAT_AV0_P) +/*Result of last MAC1 operation overflowed, sticky for MAC*/ +#define ASTAT_AV1 MK_BMSK_(ASTAT_AV1_P) +/*Condition Code, used for holding comparison results*/ +#define ASTAT_CC MK_BMSK_(ASTAT_CC_P) +/*Quotient Bit*/ +#define ASTAT_AQ MK_BMSK_(ASTAT_AQ_P) +/*Rounding mode, set for biased, clear for unbiased*/ +#define ASTAT_RND_MOD MK_BMSK_(ASTAT_RND_MOD_P) +/*Overflow Bit*/ +#define ASTAT_V MK_BMSK_(ASTAT_V_P) +/*Overflow Bit*/ +#define ASTAT_V_COPY MK_BMSK_(ASTAT_V_COPY_P) + +/************************************************** + * SEQSTAT register + **************************************************/ + +/* Bit Positions */ +#define SEQSTAT_EXCAUSE0_P 0x00000000 /* Last exception cause bit 0 */ +#define SEQSTAT_EXCAUSE1_P 0x00000001 /* Last exception cause bit 1 */ +#define SEQSTAT_EXCAUSE2_P 0x00000002 /* Last exception cause bit 2 */ +#define SEQSTAT_EXCAUSE3_P 0x00000003 /* Last exception cause bit 3 */ +#define SEQSTAT_EXCAUSE4_P 0x00000004 /* Last exception cause bit 4 */ +#define SEQSTAT_EXCAUSE5_P 0x00000005 /* Last exception cause bit 5 */ +#define SEQSTAT_IDLE_REQ_P 0x0000000C /* Pending idle mode request, + * set by IDLE instruction. + */ +#define SEQSTAT_SFTRESET_P 0x0000000D /* Indicates whether the last + * reset was a software reset + * (=1) + */ +#define SEQSTAT_HWERRCAUSE0_P 0x0000000E /* Last hw error cause bit 0 */ +#define SEQSTAT_HWERRCAUSE1_P 0x0000000F /* Last hw error cause bit 1 */ +#define SEQSTAT_HWERRCAUSE2_P 0x00000010 /* Last hw error cause bit 2 */ +#define SEQSTAT_HWERRCAUSE3_P 0x00000011 /* Last hw error cause bit 3 */ +#define SEQSTAT_HWERRCAUSE4_P 0x00000012 /* Last hw error cause bit 4 */ +/* Masks */ +/* Exception cause */ +#define SEQSTAT_EXCAUSE (MK_BMSK_(SEQSTAT_EXCAUSE0_P) | \ + MK_BMSK_(SEQSTAT_EXCAUSE1_P) | \ + MK_BMSK_(SEQSTAT_EXCAUSE2_P) | \ + MK_BMSK_(SEQSTAT_EXCAUSE3_P) | \ + MK_BMSK_(SEQSTAT_EXCAUSE4_P) | \ + MK_BMSK_(SEQSTAT_EXCAUSE5_P) | \ + 0) + +/* Indicates whether the last reset was a software reset (=1) */ +#define SEQSTAT_SFTRESET (MK_BMSK_(SEQSTAT_SFTRESET_P)) + +/* Last hw error cause */ +#define SEQSTAT_HWERRCAUSE (MK_BMSK_(SEQSTAT_HWERRCAUSE0_P) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE1_P) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE2_P) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE3_P) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE4_P) | \ + 0) + +/* Translate bits to something useful */ + +/* Last hw error cause */ +#define SEQSTAT_HWERRCAUSE_SHIFT (14) +#define SEQSTAT_HWERRCAUSE_SYSTEM_MMR (0x02 << SEQSTAT_HWERRCAUSE_SHIFT) +#define SEQSTAT_HWERRCAUSE_EXTERN_ADDR (0x03 << SEQSTAT_HWERRCAUSE_SHIFT) +#define SEQSTAT_HWERRCAUSE_PERF_FLOW (0x12 << SEQSTAT_HWERRCAUSE_SHIFT) +#define SEQSTAT_HWERRCAUSE_RAISE_5 (0x18 << SEQSTAT_HWERRCAUSE_SHIFT) + +/************************************************** + * SYSCFG register + **************************************************/ + +/* Bit Positions */ +#define SYSCFG_SSSTEP_P 0x00000000 /* Supervisor single step, when + * set it forces an exception + * for each instruction executed + */ +#define SYSCFG_CCEN_P 0x00000001 /* Enable cycle counter (=1) */ +#define SYSCFG_SNEN_P 0x00000002 /* Self nesting Interrupt Enable */ + +/* Masks */ + +/* Supervisor single step, when set it forces an exception for each + *instruction executed + */ +#define SYSCFG_SSSTEP MK_BMSK_(SYSCFG_SSSTEP_P ) +/* Enable cycle counter (=1) */ +#define SYSCFG_CCEN MK_BMSK_(SYSCFG_CCEN_P ) +/* Self Nesting Interrupt Enable */ +#define SYSCFG_SNEN MK_BMSK_(SYSCFG_SNEN_P) +/* Backward-compatibility for typos in prior releases */ +#define SYSCFG_SSSSTEP SYSCFG_SSSTEP +#define SYSCFG_CCCEN SYSCFG_CCEN + +/**************************************************** + * Core MMR Register Map + ****************************************************/ + +/* Data Cache & SRAM Memory (0xFFE00000 - 0xFFE00404) */ + +#define SRAM_BASE_ADDRESS 0xFFE00000 /* SRAM Base Address Register */ +#define DMEM_CONTROL 0xFFE00004 /* Data memory control */ +#define DCPLB_STATUS 0xFFE00008 /* Data Cache Programmable Look-Aside + * Buffer Status + */ +#define DCPLB_FAULT_STATUS 0xFFE00008 /* "" (older define) */ +#define DCPLB_FAULT_ADDR 0xFFE0000C /* Data Cache Programmable Look-Aside + * Buffer Fault Address + */ +#define DCPLB_ADDR0 0xFFE00100 /* Data Cache Protection Lookaside + * Buffer 0 + */ +#define DCPLB_ADDR1 0xFFE00104 /* Data Cache Protection Lookaside + * Buffer 1 + */ +#define DCPLB_ADDR2 0xFFE00108 /* Data Cache Protection Lookaside + * Buffer 2 + */ +#define DCPLB_ADDR3 0xFFE0010C /* Data Cacheability Protection + * Lookaside Buffer 3 + */ +#define DCPLB_ADDR4 0xFFE00110 /* Data Cacheability Protection + * Lookaside Buffer 4 + */ +#define DCPLB_ADDR5 0xFFE00114 /* Data Cacheability Protection + * Lookaside Buffer 5 + */ +#define DCPLB_ADDR6 0xFFE00118 /* Data Cacheability Protection + * Lookaside Buffer 6 + */ +#define DCPLB_ADDR7 0xFFE0011C /* Data Cacheability Protection + * Lookaside Buffer 7 + */ +#define DCPLB_ADDR8 0xFFE00120 /* Data Cacheability Protection + * Lookaside Buffer 8 + */ +#define DCPLB_ADDR9 0xFFE00124 /* Data Cacheability Protection + * Lookaside Buffer 9 + */ +#define DCPLB_ADDR10 0xFFE00128 /* Data Cacheability Protection + * Lookaside Buffer 10 + */ +#define DCPLB_ADDR11 0xFFE0012C /* Data Cacheability Protection + * Lookaside Buffer 11 + */ +#define DCPLB_ADDR12 0xFFE00130 /* Data Cacheability Protection + * Lookaside Buffer 12 + */ +#define DCPLB_ADDR13 0xFFE00134 /* Data Cacheability Protection + * Lookaside Buffer 13 + */ +#define DCPLB_ADDR14 0xFFE00138 /* Data Cacheability Protection + * Lookaside Buffer 14 + */ +#define DCPLB_ADDR15 0xFFE0013C /* Data Cacheability Protection + * Lookaside Buffer 15 + */ +#define DCPLB_DATA0 0xFFE00200 /* Data Cache 0 Status */ +#define DCPLB_DATA1 0xFFE00204 /* Data Cache 1 Status */ +#define DCPLB_DATA2 0xFFE00208 /* Data Cache 2 Status */ +#define DCPLB_DATA3 0xFFE0020C /* Data Cache 3 Status */ +#define DCPLB_DATA4 0xFFE00210 /* Data Cache 4 Status */ +#define DCPLB_DATA5 0xFFE00214 /* Data Cache 5 Status */ +#define DCPLB_DATA6 0xFFE00218 /* Data Cache 6 Status */ +#define DCPLB_DATA7 0xFFE0021C /* Data Cache 7 Status */ +#define DCPLB_DATA8 0xFFE00220 /* Data Cache 8 Status */ +#define DCPLB_DATA9 0xFFE00224 /* Data Cache 9 Status */ +#define DCPLB_DATA10 0xFFE00228 /* Data Cache 10 Status */ +#define DCPLB_DATA11 0xFFE0022C /* Data Cache 11 Status */ +#define DCPLB_DATA12 0xFFE00230 /* Data Cache 12 Status */ +#define DCPLB_DATA13 0xFFE00234 /* Data Cache 13 Status */ +#define DCPLB_DATA14 0xFFE00238 /* Data Cache 14 Status */ +#define DCPLB_DATA15 0xFFE0023C /* Data Cache 15 Status */ +#define DCPLB_DATA16 0xFFE00240 /* Extra Dummy entry */ + +#define DTEST_COMMAND 0xFFE00300 /* Data Test Command Register */ +#define DTEST_DATA0 0xFFE00400 /* Data Test Data Register */ +#define DTEST_DATA1 0xFFE00404 /* Data Test Data Register */ + +/* Instruction Cache & SRAM Memory (0xFFE01004 - 0xFFE01404) */ + +#define IMEM_CONTROL 0xFFE01004 /* Instruction Memory Control */ +#define ICPLB_STATUS 0xFFE01008 /* Instruction Cache miss status */ +#define CODE_FAULT_STATUS 0xFFE01008 /* "" (older define) */ +#define ICPLB_FAULT_ADDR 0xFFE0100C /* Instruction Cache miss address */ +#define CODE_FAULT_ADDR 0xFFE0100C /* "" (older define) */ +#define ICPLB_ADDR0 0xFFE01100 /* Instruction Cacheability + * Protection Lookaside Buffer 0 + */ +#define ICPLB_ADDR1 0xFFE01104 /* Instruction Cacheability + * Protection Lookaside Buffer 1 + */ +#define ICPLB_ADDR2 0xFFE01108 /* Instruction Cacheability + * Protection Lookaside Buffer 2 + */ +#define ICPLB_ADDR3 0xFFE0110C /* Instruction Cacheability + * Protection Lookaside Buffer 3 + */ +#define ICPLB_ADDR4 0xFFE01110 /* Instruction Cacheability + * Protection Lookaside Buffer 4 + */ +#define ICPLB_ADDR5 0xFFE01114 /* Instruction Cacheability + * Protection Lookaside Buffer 5 + */ +#define ICPLB_ADDR6 0xFFE01118 /* Instruction Cacheability + * Protection Lookaside Buffer 6 + */ +#define ICPLB_ADDR7 0xFFE0111C /* Instruction Cacheability + * Protection Lookaside Buffer 7 + */ +#define ICPLB_ADDR8 0xFFE01120 /* Instruction Cacheability + * Protection Lookaside Buffer 8 + */ +#define ICPLB_ADDR9 0xFFE01124 /* Instruction Cacheability + * Protection Lookaside Buffer 9 + */ +#define ICPLB_ADDR10 0xFFE01128 /* Instruction Cacheability + * Protection Lookaside Buffer 10 + */ +#define ICPLB_ADDR11 0xFFE0112C /* Instruction Cacheability + * Protection Lookaside Buffer 11 + */ +#define ICPLB_ADDR12 0xFFE01130 /* Instruction Cacheability + * Protection Lookaside Buffer 12 + */ +#define ICPLB_ADDR13 0xFFE01134 /* Instruction Cacheability + * Protection Lookaside Buffer 13 + */ +#define ICPLB_ADDR14 0xFFE01138 /* Instruction Cacheability + * Protection Lookaside Buffer 14 + */ +#define ICPLB_ADDR15 0xFFE0113C /* Instruction Cacheability + * Protection Lookaside Buffer 15 + */ +#define ICPLB_DATA0 0xFFE01200 /* Instruction Cache 0 Status */ +#define ICPLB_DATA1 0xFFE01204 /* Instruction Cache 1 Status */ +#define ICPLB_DATA2 0xFFE01208 /* Instruction Cache 2 Status */ +#define ICPLB_DATA3 0xFFE0120C /* Instruction Cache 3 Status */ +#define ICPLB_DATA4 0xFFE01210 /* Instruction Cache 4 Status */ +#define ICPLB_DATA5 0xFFE01214 /* Instruction Cache 5 Status */ +#define ICPLB_DATA6 0xFFE01218 /* Instruction Cache 6 Status */ +#define ICPLB_DATA7 0xFFE0121C /* Instruction Cache 7 Status */ +#define ICPLB_DATA8 0xFFE01220 /* Instruction Cache 8 Status */ +#define ICPLB_DATA9 0xFFE01224 /* Instruction Cache 9 Status */ +#define ICPLB_DATA10 0xFFE01228 /* Instruction Cache 10 Status */ +#define ICPLB_DATA11 0xFFE0122C /* Instruction Cache 11 Status */ +#define ICPLB_DATA12 0xFFE01230 /* Instruction Cache 12 Status */ +#define ICPLB_DATA13 0xFFE01234 /* Instruction Cache 13 Status */ +#define ICPLB_DATA14 0xFFE01238 /* Instruction Cache 14 Status */ +#define ICPLB_DATA15 0xFFE0123C /* Instruction Cache 15 Status */ +#define ITEST_COMMAND 0xFFE01300 /* Instruction Test Command Register */ +#define ITEST_DATA0 0xFFE01400 /* Instruction Test Data Register */ +#define ITEST_DATA1 0xFFE01404 /* Instruction Test Data Register */ + +/* Event/Interrupt Controller Registers (0xFFE02000 - 0xFFE02110) */ + +#define EVT0 0xFFE02000 /* Event Vector 0 ESR Address */ +#define EVT1 0xFFE02004 /* Event Vector 1 ESR Address */ +#define EVT2 0xFFE02008 /* Event Vector 2 ESR Address */ +#define EVT3 0xFFE0200C /* Event Vector 3 ESR Address */ +#define EVT4 0xFFE02010 /* Event Vector 4 ESR Address */ +#define EVT5 0xFFE02014 /* Event Vector 5 ESR Address */ +#define EVT6 0xFFE02018 /* Event Vector 6 ESR Address */ +#define EVT7 0xFFE0201C /* Event Vector 7 ESR Address */ +#define EVT8 0xFFE02020 /* Event Vector 8 ESR Address */ +#define EVT9 0xFFE02024 /* Event Vector 9 ESR Address */ +#define EVT10 0xFFE02028 /* Event Vector 10 ESR Address */ +#define EVT11 0xFFE0202C /* Event Vector 11 ESR Address */ +#define EVT12 0xFFE02030 /* Event Vector 12 ESR Address */ +#define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */ +#define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */ +#define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */ +#define IMASK 0xFFE02104 /* Interrupt Mask Register */ +#define IPEND 0xFFE02108 /* Interrupt Pending Register */ +#define ILAT 0xFFE0210C /* Interrupt Latch Register */ +#define IPRIO 0xFFE02110 /* Core Interrupt Priority Register */ + +/* Core Timer Registers (0xFFE03000 - 0xFFE0300C) */ + +#define TCNTL 0xFFE03000 /* Core Timer Control Register */ +#define TPERIOD 0xFFE03004 /* Core Timer Period Register */ +#define TSCALE 0xFFE03008 /* Core Timer Scale Register */ +#define TCOUNT 0xFFE0300C /* Core Timer Count Register */ + +/* Debug/MP/Emulation Registers (0xFFE05000 - 0xFFE05008) */ +#define DSPID 0xFFE05000 /* DSP Processor ID Register for + * MP implementations + */ + +#define DBGSTAT 0xFFE05008 /* Debug Status Register */ + +/* Trace Buffer Registers (0xFFE06000 - 0xFFE06100) */ + +#define TBUFCTL 0xFFE06000 /* Trace Buffer Control Register */ +#define TBUFSTAT 0xFFE06004 /* Trace Buffer Status Register */ +#define TBUF 0xFFE06100 /* Trace Buffer */ + +/* Watchpoint Control Registers (0xFFE07000 - 0xFFE07200) */ + +/* Watchpoint Instruction Address Control Register */ +#define WPIACTL 0xFFE07000 +/* Watchpoint Instruction Address Register 0 */ +#define WPIA0 0xFFE07040 +/* Watchpoint Instruction Address Register 1 */ +#define WPIA1 0xFFE07044 +/* Watchpoint Instruction Address Register 2 */ +#define WPIA2 0xFFE07048 +/* Watchpoint Instruction Address Register 3 */ +#define WPIA3 0xFFE0704C +/* Watchpoint Instruction Address Register 4 */ +#define WPIA4 0xFFE07050 +/* Watchpoint Instruction Address Register 5 */ +#define WPIA5 0xFFE07054 +/* Watchpoint Instruction Address Count Register 0 */ +#define WPIACNT0 0xFFE07080 +/* Watchpoint Instruction Address Count Register 1 */ +#define WPIACNT1 0xFFE07084 +/* Watchpoint Instruction Address Count Register 2 */ +#define WPIACNT2 0xFFE07088 +/* Watchpoint Instruction Address Count Register 3 */ +#define WPIACNT3 0xFFE0708C +/* Watchpoint Instruction Address Count Register 4 */ +#define WPIACNT4 0xFFE07090 +/* Watchpoint Instruction Address Count Register 5 */ +#define WPIACNT5 0xFFE07094 +/* Watchpoint Data Address Control Register */ +#define WPDACTL 0xFFE07100 +/* Watchpoint Data Address Register 0 */ +#define WPDA0 0xFFE07140 +/* Watchpoint Data Address Register 1 */ +#define WPDA1 0xFFE07144 +/* Watchpoint Data Address Count Value Register 0 */ +#define WPDACNT0 0xFFE07180 +/* Watchpoint Data Address Count Value Register 1 */ +#define WPDACNT1 0xFFE07184 +/* Watchpoint Status Register */ +#define WPSTAT 0xFFE07200 + +/* Performance Monitor Registers (0xFFE08000 - 0xFFE08104) */ + +/* Performance Monitor Control Register */ +#define PFCTL 0xFFE08000 +/* Performance Monitor Counter Register 0 */ +#define PFCNTR0 0xFFE08100 +/* Performance Monitor Counter Register 1 */ +#define PFCNTR1 0xFFE08104 + +/**************************************************** + * Core MMR Register Bits + ****************************************************/ + +/************************************************** + * EVT registers (ILAT, IMASK, and IPEND). + **************************************************/ + +/* Bit Positions */ +#define EVT_EMU_P 0x00000000 /* Emulator interrupt bit position */ +#define EVT_RST_P 0x00000001 /* Reset interrupt bit position */ +#define EVT_NMI_P 0x00000002 /* Non Maskable interrupt bit position */ +#define EVT_EVX_P 0x00000003 /* Exception bit position */ +#define EVT_IRPTEN_P 0x00000004 /* Global interrupt enable bit position */ +#define EVT_IVHW_P 0x00000005 /* Hardware Error interrupt bit position */ +#define EVT_IVTMR_P 0x00000006 /* Timer interrupt bit position */ +#define EVT_IVG7_P 0x00000007 /* IVG7 interrupt bit position */ +#define EVT_IVG8_P 0x00000008 /* IVG8 interrupt bit position */ +#define EVT_IVG9_P 0x00000009 /* IVG9 interrupt bit position */ +#define EVT_IVG10_P 0x0000000a /* IVG10 interrupt bit position */ +#define EVT_IVG11_P 0x0000000b /* IVG11 interrupt bit position */ +#define EVT_IVG12_P 0x0000000c /* IVG12 interrupt bit position */ +#define EVT_IVG13_P 0x0000000d /* IVG13 interrupt bit position */ +#define EVT_IVG14_P 0x0000000e /* IVG14 interrupt bit position */ +#define EVT_IVG15_P 0x0000000f /* IVG15 interrupt bit position */ + +/* Masks */ +#define EVT_EMU MK_BMSK_(EVT_EMU_P ) /* Emulator interrupt mask */ +#define EVT_RST MK_BMSK_(EVT_RST_P ) /* Reset interrupt mask */ +#define EVT_NMI MK_BMSK_(EVT_NMI_P ) /* Non Maskable interrupt mask */ +#define EVT_EVX MK_BMSK_(EVT_EVX_P ) /* Exception mask */ +#define EVT_IRPTEN MK_BMSK_(EVT_IRPTEN_P) /* Global interrupt enable mask */ +#define EVT_IVHW MK_BMSK_(EVT_IVHW_P ) /* Hardware Error interrupt mask */ +#define EVT_IVTMR MK_BMSK_(EVT_IVTMR_P ) /* Timer interrupt mask */ +#define EVT_IVG7 MK_BMSK_(EVT_IVG7_P ) /* IVG7 interrupt mask */ +#define EVT_IVG8 MK_BMSK_(EVT_IVG8_P ) /* IVG8 interrupt mask */ +#define EVT_IVG9 MK_BMSK_(EVT_IVG9_P ) /* IVG9 interrupt mask */ +#define EVT_IVG10 MK_BMSK_(EVT_IVG10_P ) /* IVG10 interrupt mask */ +#define EVT_IVG11 MK_BMSK_(EVT_IVG11_P ) /* IVG11 interrupt mask */ +#define EVT_IVG12 MK_BMSK_(EVT_IVG12_P ) /* IVG12 interrupt mask */ +#define EVT_IVG13 MK_BMSK_(EVT_IVG13_P ) /* IVG13 interrupt mask */ +#define EVT_IVG14 MK_BMSK_(EVT_IVG14_P ) /* IVG14 interrupt mask */ +#define EVT_IVG15 MK_BMSK_(EVT_IVG15_P ) /* IVG15 interrupt mask */ + +/************************************************** + * DMEM_CONTROL Register + **************************************************/ +/* Bit Positions */ +#define ENDM_P 0x00 /* (doesn't really exist) Enable + *Data Memory L1 + */ +#define DMCTL_ENDM_P ENDM_P /* "" (older define) */ + +#define ENDCPLB_P 0x01 /* Enable DCPLBS */ +#define DMCTL_ENDCPLB_P ENDCPLB_P /* "" (older define) */ +#define DMC0_P 0x02 /* L1 Data Memory Configure bit 0 */ +#define DMCTL_DMC0_P DMC0_P /* "" (older define) */ +#define DMC1_P 0x03 /* L1 Data Memory Configure bit 1 */ +#define DMCTL_DMC1_P DMC1_P /* "" (older define) */ +#define DCBS_P 0x04 /* L1 Data Cache Bank Select */ +#define PORT_PREF0_P 0x12 /* DAG0 Port Preference */ +#define PORT_PREF1_P 0x13 /* DAG1 Port Preference */ + +/* Masks */ +#define ENDM 0x00000001 /* (doesn't really exist) Enable + * Data Memory L1 + */ +#define ENDCPLB 0x00000002 /* Enable DCPLB */ +#define ASRAM_BSRAM 0x00000000 +#define ACACHE_BSRAM 0x00000008 +#define ACACHE_BCACHE 0x0000000C +#define DCBS 0x00000010 /* L1 Data Cache Bank Select */ +#define PORT_PREF0 0x00001000 /* DAG0 Port Preference */ +#define PORT_PREF1 0x00002000 /* DAG1 Port Preference */ + +/* IMEM_CONTROL Register */ +/* Bit Positions */ +#define ENIM_P 0x00 /* Enable L1 Code Memory */ +#define IMCTL_ENIM_P 0x00 /* "" (older define) */ +#define ENICPLB_P 0x01 /* Enable ICPLB */ +#define IMCTL_ENICPLB_P 0x01 /* "" (older define) */ +#define IMC_P 0x02 /* Enable */ +#define IMCTL_IMC_P 0x02 /* Configure L1 code memory as + * cache (0=SRAM) + */ +#define ILOC0_P 0x03 /* Lock Way 0 */ +#define ILOC1_P 0x04 /* Lock Way 1 */ +#define ILOC2_P 0x05 /* Lock Way 2 */ +#define ILOC3_P 0x06 /* Lock Way 3 */ +#define LRUPRIORST_P 0x0D /* Least Recently Used Replacement + * Priority + */ +/* Masks */ +#define ENIM 0x00000001 /* Enable L1 Code Memory */ +#define ENICPLB 0x00000002 /* Enable ICPLB */ +#define IMC 0x00000004 /* Configure L1 code memory as + * cache (0=SRAM) + */ +#define ILOC0 0x00000008 /* Lock Way 0 */ +#define ILOC1 0x00000010 /* Lock Way 1 */ +#define ILOC2 0x00000020 /* Lock Way 2 */ +#define ILOC3 0x00000040 /* Lock Way 3 */ +#define LRUPRIORST 0x00002000 /* Least Recently Used Replacement + * Priority + */ + +/* TCNTL Masks */ +#define TMPWR 0x00000001 /* Timer Low Power Control, + * 0=low power mode, 1=active state + */ +#define TMREN 0x00000002 /* Timer enable, 0=disable, 1=enable */ +#define TAUTORLD 0x00000004 /* Timer auto reload */ +#define TINT 0x00000008 /* Timer generated interrupt 0=no + * interrupt has been generated, + * 1=interrupt has been generated + * (sticky) + */ + +/* DCPLB_DATA and ICPLB_DATA Registers */ +/* Bit Positions */ +#define CPLB_VALID_P 0x00000000 /* 0=invalid entry, 1=valid entry */ +#define CPLB_LOCK_P 0x00000001 /* 0=entry may be replaced, 1=entry + * locked + */ +#define CPLB_USER_RD_P 0x00000002 /* 0=no read access, 1=read access + * allowed (user mode) + */ +/* Masks */ +#define CPLB_VALID 0x00000001 /* 0=invalid entry, 1=valid entry */ +#define CPLB_LOCK 0x00000002 /* 0=entry may be replaced, 1=entry + * locked + */ +#define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access + * allowed (user mode) + */ + +#define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */ +#define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ +#define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ +#define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not + * mapped to L1 + */ +#define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high + * priority port + */ +#define CPLB_L1_CHBL 0x00001000 /* 0=non-cacheable in L1, 1=cacheable + * in L1 + */ +/* ICPLB_DATA only */ +#define CPLB_LRUPRIO 0x00000100 /* 0=can be replaced by any line, + * 1=priority for non-replacement + */ +/* DCPLB_DATA only */ +#define CPLB_USER_WR 0x00000008 /* 0=no write access, 0=write + * access allowed (user mode) + */ +#define CPLB_SUPV_WR 0x00000010 /* 0=no write access, 0=write + * access allowed (supervisor mode) + */ +#define CPLB_DIRTY 0x00000080 /* 1=dirty, 0=clean */ +#define CPLB_L1_AOW 0x00008000 /* 0=do not allocate cache lines on + * write-through writes, + * 1= allocate cache lines on + * write-through writes. + */ +#define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */ + +#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR + +/* TBUFCTL Masks */ +#define TBUFPWR 0x0001 +#define TBUFEN 0x0002 +#define TBUFOVF 0x0004 +#define TBUFCMPLP_SINGLE 0x0008 +#define TBUFCMPLP_DOUBLE 0x0010 +#define TBUFCMPLP (TBUFCMPLP_SINGLE | TBUFCMPLP_DOUBLE) + +/* TBUFSTAT Masks */ +#define TBUFCNT 0x001F + +/* ITEST_COMMAND and DTEST_COMMAND Registers */ +/* Masks */ +#define TEST_READ 0x00000000 /* Read Access */ +#define TEST_WRITE 0x00000002 /* Write Access */ +#define TEST_TAG 0x00000000 /* Access TAG */ +#define TEST_DATA 0x00000004 /* Access DATA */ +#define TEST_DW0 0x00000000 /* Select Double Word 0 */ +#define TEST_DW1 0x00000008 /* Select Double Word 1 */ +#define TEST_DW2 0x00000010 /* Select Double Word 2 */ +#define TEST_DW3 0x00000018 /* Select Double Word 3 */ +#define TEST_MB0 0x00000000 /* Select Mini-Bank 0 */ +#define TEST_MB1 0x00010000 /* Select Mini-Bank 1 */ +#define TEST_MB2 0x00020000 /* Select Mini-Bank 2 */ +#define TEST_MB3 0x00030000 /* Select Mini-Bank 3 */ +#define TEST_SET(x) ((x << 5) & 0x03E0) /* Set Index 0->31 */ +#define TEST_WAY0 0x00000000 /* Access Way0 */ +#define TEST_WAY1 0x04000000 /* Access Way1 */ +/* ITEST_COMMAND only */ +#define TEST_WAY2 0x08000000 /* Access Way2 */ +#define TEST_WAY3 0x0C000000 /* Access Way3 */ +/* DTEST_COMMAND only */ +#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */ +#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */ + +#endif /* _DEF_LPBLACKFIN_H */ diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h new file mode 100644 index 00000000000..0889c3abb59 --- /dev/null +++ b/arch/blackfin/include/asm/delay.h @@ -0,0 +1,62 @@ +/* + * delay.h - delay functions + * + * Copyright (c) 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_DELAY_H__ +#define __ASM_DELAY_H__ + +#include <mach/anomaly.h> + +static inline void __delay(unsigned long loops) +{ + if (ANOMALY_05000312) { + /* Interrupted loads to loop registers -> bad */ + unsigned long tmp; + __asm__ __volatile__( + "[--SP] = LC0;" + "[--SP] = LT0;" + "[--SP] = LB0;" + "LSETUP (1f,1f) LC0 = %1;" + "1: NOP;" + /* We take advantage of the fact that LC0 is 0 at + * the end of the loop. Otherwise we'd need some + * NOPs after the CLI here. + */ + "CLI %0;" + "LB0 = [SP++];" + "LT0 = [SP++];" + "LC0 = [SP++];" + "STI %0;" + : "=d" (tmp) + : "a" (loops) + ); + } else + __asm__ __volatile__ ( + "LSETUP(1f, 1f) LC0 = %0;" + "1: NOP;" + : + : "a" (loops) + : "LT0", "LB0", "LC0" + ); +} + +#include <linux/param.h> /* needed for HZ */ + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +static inline void udelay(unsigned long usecs) +{ + extern unsigned long loops_per_jiffy; + __delay(usecs * loops_per_jiffy / (1000000 / HZ)); +} + +#endif diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h new file mode 100644 index 00000000000..d8f9872b0e2 --- /dev/null +++ b/arch/blackfin/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/blackfin/include/asm/div64.h b/arch/blackfin/include/asm/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/arch/blackfin/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h new file mode 100644 index 00000000000..1a13c2fc366 --- /dev/null +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -0,0 +1,83 @@ +#ifndef _BLACKFIN_DMA_MAPPING_H +#define _BLACKFIN_DMA_MAPPING_H + +#include <asm/scatterlist.h> + +void dma_alloc_init(unsigned long start, unsigned long end); +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle); + +/* + * Now for the API extensions over the pci_ one + */ +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +#define dma_mapping_error + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single is performed. + */ +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction); + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_addr, size, dir); +} + +/* + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction); + +#endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h new file mode 100644 index 00000000000..6509733bb0f --- /dev/null +++ b/arch/blackfin/include/asm/dma.h @@ -0,0 +1,205 @@ +/* + * File: include/asm-blackfin/simple_bf533_dma.h + * Based on: none - original work + * Author: LG Soft India + * Copyright (C) 2004-2005 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: This file contains the major Data structures and constants + * used for DMA Implementation in BF533 + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_DMA_H_ +#define _BLACKFIN_DMA_H_ + +#include <asm/io.h> +#include <linux/slab.h> +#include <asm/irq.h> +#include <asm/signal.h> + +#include <linux/kernel.h> +#include <mach/dma.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <asm/blackfin.h> + +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/***************************************************************************** +* Generic DMA Declarations +* +****************************************************************************/ +enum dma_chan_status { + DMA_CHANNEL_FREE, + DMA_CHANNEL_REQUESTED, + DMA_CHANNEL_ENABLED, +}; + +/*------------------------- + * config reg bits value + *-------------------------*/ +#define DATA_SIZE_8 0 +#define DATA_SIZE_16 1 +#define DATA_SIZE_32 2 + +#define DMA_FLOW_STOP 0 +#define DMA_FLOW_AUTO 1 +#define DMA_FLOW_ARRAY 4 +#define DMA_FLOW_SMALL 6 +#define DMA_FLOW_LARGE 7 + +#define DIMENSION_LINEAR 0 +#define DIMENSION_2D 1 + +#define DIR_READ 0 +#define DIR_WRITE 1 + +#define INTR_DISABLE 0 +#define INTR_ON_BUF 2 +#define INTR_ON_ROW 3 + +#define DMA_NOSYNC_KEEP_DMA_BUF 0 +#define DMA_SYNC_RESTART 1 + +struct dmasg { + unsigned long next_desc_addr; + unsigned long start_addr; + unsigned short cfg; + unsigned short x_count; + short x_modify; + unsigned short y_count; + short y_modify; +} __attribute__((packed)); + +struct dma_register { + unsigned long next_desc_ptr; /* DMA Next Descriptor Pointer register */ + unsigned long start_addr; /* DMA Start address register */ + + unsigned short cfg; /* DMA Configuration register */ + unsigned short dummy1; /* DMA Configuration register */ + + unsigned long reserved; + + unsigned short x_count; /* DMA x_count register */ + unsigned short dummy2; + + short x_modify; /* DMA x_modify register */ + unsigned short dummy3; + + unsigned short y_count; /* DMA y_count register */ + unsigned short dummy4; + + short y_modify; /* DMA y_modify register */ + unsigned short dummy5; + + unsigned long curr_desc_ptr; /* DMA Current Descriptor Pointer + register */ + unsigned long curr_addr_ptr; /* DMA Current Address Pointer + register */ + unsigned short irq_status; /* DMA irq status register */ + unsigned short dummy6; + + unsigned short peripheral_map; /* DMA peripheral map register */ + unsigned short dummy7; + + unsigned short curr_x_count; /* DMA Current x-count register */ + unsigned short dummy8; + + unsigned long reserved2; + + unsigned short curr_y_count; /* DMA Current y-count register */ + unsigned short dummy9; + + unsigned long reserved3; + +}; + +typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id); + +struct dma_channel { + struct mutex dmalock; + char *device_id; + enum dma_chan_status chan_status; + struct dma_register *regs; + struct dmasg *sg; /* large mode descriptor */ + unsigned int ctrl_num; /* controller number */ + dma_interrupt_t irq_callback; + void *data; + unsigned int dma_enable_flag; + unsigned int loopback_flag; +#ifdef CONFIG_PM + unsigned short saved_peripheral_map; +#endif +}; + +#ifdef CONFIG_PM +int blackfin_dma_suspend(void); +void blackfin_dma_resume(void); +#endif + +/******************************************************************************* +* DMA API's +*******************************************************************************/ +/* functions to set register mode */ +void set_dma_start_addr(unsigned int channel, unsigned long addr); +void set_dma_next_desc_addr(unsigned int channel, unsigned long addr); +void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr); +void set_dma_x_count(unsigned int channel, unsigned short x_count); +void set_dma_x_modify(unsigned int channel, short x_modify); +void set_dma_y_count(unsigned int channel, unsigned short y_count); +void set_dma_y_modify(unsigned int channel, short y_modify); +void set_dma_config(unsigned int channel, unsigned short config); +unsigned short set_bfin_dma_config(char direction, char flow_mode, + char intr_mode, char dma_mode, char width, + char syncmode); +void set_dma_curr_addr(unsigned int channel, unsigned long addr); + +/* get curr status for polling */ +unsigned short get_dma_curr_irqstat(unsigned int channel); +unsigned short get_dma_curr_xcount(unsigned int channel); +unsigned short get_dma_curr_ycount(unsigned int channel); +unsigned long get_dma_next_desc_ptr(unsigned int channel); +unsigned long get_dma_curr_desc_ptr(unsigned int channel); +unsigned long get_dma_curr_addr(unsigned int channel); + +/* set large DMA mode descriptor */ +void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg); + +/* check if current channel is in use */ +int dma_channel_active(unsigned int channel); + +/* common functions must be called in any mode */ +void free_dma(unsigned int channel); +int dma_channel_active(unsigned int channel); /* check if a channel is in use */ +void disable_dma(unsigned int channel); +void enable_dma(unsigned int channel); +int request_dma(unsigned int channel, char *device_id); +int set_dma_callback(unsigned int channel, dma_interrupt_t callback, + void *data); +void dma_disable_irq(unsigned int channel); +void dma_enable_irq(unsigned int channel); +void clear_dma_irqstat(unsigned int channel); +void *dma_memcpy(void *dest, const void *src, size_t count); +void *safe_dma_memcpy(void *dest, const void *src, size_t count); + +extern int channel2irq(unsigned int channel); +extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL]; + +#endif diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h new file mode 100644 index 00000000000..96e8208f929 --- /dev/null +++ b/arch/blackfin/include/asm/dpmc.h @@ -0,0 +1,57 @@ +/* + * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power + * Management Controller Driver. + * Copyright (C) 2004-2008 Analog Device Inc. + * + */ +#ifndef _BLACKFIN_DPMC_H_ +#define _BLACKFIN_DPMC_H_ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); +void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); +void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); +void do_hibernate(int wakeup); +void set_dram_srfs(void); +void unset_dram_srfs(void); + +#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16)) + +struct bfin_dpmc_platform_data { + const unsigned int *tuple_tab; + unsigned short tabsize; + unsigned short vr_settling_time; /* in us */ +}; + +#else + +#define PM_PUSH(x) \ + R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\ + [--SP] = R0;\ + +#define PM_POP(x) \ + R0 = [SP++];\ + [P0 + (x - SRAM_BASE_ADDRESS)] = R0;\ + +#define PM_SYS_PUSH(x) \ + R0 = [P0 + (x - PLL_CTL)];\ + [--SP] = R0;\ + +#define PM_SYS_POP(x) \ + R0 = [SP++];\ + [P0 + (x - PLL_CTL)] = R0;\ + +#define PM_SYS_PUSH16(x) \ + R0 = w[P0 + (x - PLL_CTL)];\ + [--SP] = R0;\ + +#define PM_SYS_POP16(x) \ + R0 = [SP++];\ + w[P0 + (x - PLL_CTL)] = R0;\ + +#endif +#endif /* __KERNEL__ */ + +#endif /*_BLACKFIN_DPMC_H_*/ diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h new file mode 100644 index 00000000000..110f1c1f845 --- /dev/null +++ b/arch/blackfin/include/asm/early_printk.h @@ -0,0 +1,28 @@ +/* + * File: include/asm-blackfin/early_printk.h + * Author: Robin Getz <rgetz@blackfin.uclinux.org + * + * Created: 14Aug2007 + * Description: function prototpyes for early printk + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifdef CONFIG_EARLY_PRINTK +extern int setup_early_printk(char *); +#else +#define setup_early_printk(fmt) do { } while (0) +#endif /* CONFIG_EARLY_PRINTK */ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h new file mode 100644 index 00000000000..67a03a8a353 --- /dev/null +++ b/arch/blackfin/include/asm/elf.h @@ -0,0 +1,127 @@ +/* Changes made by LG Soft Oct 2004*/ + +#ifndef __ASMBFIN_ELF_H +#define __ASMBFIN_ELF_H + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/user.h> + +/* Processor specific flags for the ELF header e_flags field. */ +#define EF_BFIN_PIC 0x00000001 /* -fpic */ +#define EF_BFIN_FDPIC 0x00000002 /* -mfdpic */ +#define EF_BFIN_CODE_IN_L1 0x00000010 /* --code-in-l1 */ +#define EF_BFIN_DATA_IN_L1 0x00000020 /* --data-in-l1 */ +#define EF_BFIN_CODE_IN_L2 0x00000040 /* --code-in-l2 */ +#define EF_BFIN_DATA_IN_L2 0x00000080 /* --data-in-l2 */ + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_bfinfp_struct elf_fpregset_t; +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN) + +#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC) + +/* EM_BLACKFIN defined in linux/elf.h */ + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_BLACKFIN + +#define ELF_PLAT_INIT(_r) _r->p1 = 0 + +#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ +do { \ + _regs->r7 = 0; \ + _regs->p0 = _exec_map_addr; \ + _regs->p1 = _interp_map_addr; \ + _regs->p2 = _dynamic_addr; \ +} while(0) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC +#define ELF_EXEC_PAGESIZE 4096 + +#define R_unused0 0 /* relocation type 0 is not defined */ +#define R_pcrel5m2 1 /*LSETUP part a */ +#define R_unused1 2 /* relocation type 2 is not defined */ +#define R_pcrel10 3 /* type 3, if cc jump <target> */ +#define R_pcrel12_jump 4 /* type 4, jump <target> */ +#define R_rimm16 5 /* type 0x5, rN = <target> */ +#define R_luimm16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */ +#define R_huimm16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */ +#define R_pcrel12_jump_s 8 /* # 0x8 jump.s <target> */ +#define R_pcrel24_jump_x 9 /* # 0x9 jump.x <target> */ +#define R_pcrel24 10 /* # 0xa call <target> , not expandable */ +#define R_unusedb 11 /* # 0xb not generated */ +#define R_unusedc 12 /* # 0xc not used */ +#define R_pcrel24_jump_l 13 /*0xd jump.l <target> */ +#define R_pcrel24_call_x 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */ +#define R_var_eq_symb 15 /* 0xf, linker should treat it same as 0x12 */ +#define R_byte_data 16 /* 0x10, .byte var = symbol */ +#define R_byte2_data 17 /* 0x11, .byte2 var = symbol */ +#define R_byte4_data 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ +#define R_pcrel11 19 /* 0x13, lsetup part b */ +#define R_unused14 20 /* 0x14, undefined */ +#define R_unused15 21 /* not generated by VDSP 3.5 */ + +/* arithmetic relocations */ +#define R_push 0xE0 +#define R_const 0xE1 +#define R_add 0xE2 +#define R_sub 0xE3 +#define R_mult 0xE4 +#define R_div 0xE5 +#define R_mod 0xE6 +#define R_lshift 0xE7 +#define R_rshift 0xE8 +#define R_and 0xE9 +#define R_or 0xEA +#define R_xor 0xEB +#define R_land 0xEC +#define R_lor 0xED +#define R_len 0xEE +#define R_neg 0xEF +#define R_comp 0xF0 +#define R_page 0xF1 +#define R_hwpage 0xF2 +#define R_addr 0xF3 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + memcpy((char *) &pr_reg, (char *)regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) + +#endif diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h new file mode 100644 index 00000000000..27f6c785d10 --- /dev/null +++ b/arch/blackfin/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h new file mode 100644 index 00000000000..c4f721e0d00 --- /dev/null +++ b/arch/blackfin/include/asm/entry.h @@ -0,0 +1,61 @@ +#ifndef __BFIN_ENTRY_H +#define __BFIN_ENTRY_H + +#include <asm/setup.h> +#include <asm/page.h> + +#ifdef __ASSEMBLY__ + +#define LFLUSH_I_AND_D 0x00000808 +#define LSIGTRAP 5 + +/* process bits for task_struct.flags */ +#define PF_TRACESYS_OFF 3 +#define PF_TRACESYS_BIT 5 +#define PF_PTRACED_OFF 3 +#define PF_PTRACED_BIT 4 +#define PF_DTRACE_OFF 1 +#define PF_DTRACE_BIT 5 + +/* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + +/* This one is used for exceptions, emulation, and NMI. It doesn't push + RETI and doesn't do cli. */ +#define SAVE_ALL_SYS save_context_no_interrupts +/* This is used for all normal interrupts. It saves a minimum of registers + to the stack, loads the IRQ number, and jumps to common code. */ +#define INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R0 = (N); \ + jump __common_int_entry; + +/* For timer interrupts, we need to save IPEND, since the user_mode + macro accesses it to determine where to account time. */ +#define TIMER_INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + jump __common_int_entry; + +/* This one pushes RETI without using CLI. Interrupts are enabled. */ +#define SAVE_CONTEXT_SYSCALL save_context_syscall +#define SAVE_CONTEXT save_context_with_interrupts + +#define RESTORE_ALL_SYS restore_context_no_interrupts +#define RESTORE_CONTEXT restore_context_with_interrupts + +#endif /* __ASSEMBLY__ */ +#endif /* __BFIN_ENTRY_H */ diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h new file mode 100644 index 00000000000..164e4f39bb5 --- /dev/null +++ b/arch/blackfin/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_ERRNO_H +#define _BFIN_ERRNO_H + +#include<asm-generic/errno.h> + +#endif /* _BFIN_ERRNO_H */ diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h new file mode 100644 index 00000000000..c7df3803099 --- /dev/null +++ b/arch/blackfin/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include <linux/fb.h> + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h new file mode 100644 index 00000000000..9c403712785 --- /dev/null +++ b/arch/blackfin/include/asm/fcntl.h @@ -0,0 +1,13 @@ +#ifndef _BFIN_FCNTL_H +#define _BFIN_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include <asm-generic/fcntl.h> + +#endif diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h new file mode 100644 index 00000000000..32c4d495d84 --- /dev/null +++ b/arch/blackfin/include/asm/fixed_code.h @@ -0,0 +1,46 @@ +/* This file defines the fixed addresses where userspace programs can find + atomic code sequences. */ + +#ifndef __BFIN_ASM_FIXED_CODE_H__ +#define __BFIN_ASM_FIXED_CODE_H__ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/linkage.h> +#include <linux/ptrace.h> +extern asmlinkage void finish_atomic_sections(struct pt_regs *regs); +extern char fixed_code_start; +extern char fixed_code_end; +extern int atomic_xchg32(void); +extern int atomic_cas32(void); +extern int atomic_add32(void); +extern int atomic_sub32(void); +extern int atomic_ior32(void); +extern int atomic_and32(void); +extern int atomic_xor32(void); +extern void safe_user_instruction(void); +extern void sigreturn_stub(void); +#endif +#endif + +#define FIXED_CODE_START 0x400 + +#define SIGRETURN_STUB 0x400 + +#define ATOMIC_SEQS_START 0x410 + +#define ATOMIC_XCHG32 0x410 +#define ATOMIC_CAS32 0x420 +#define ATOMIC_ADD32 0x430 +#define ATOMIC_SUB32 0x440 +#define ATOMIC_IOR32 0x450 +#define ATOMIC_AND32 0x460 +#define ATOMIC_XOR32 0x470 + +#define ATOMIC_SEQS_END 0x480 + +#define SAFE_USER_INSTRUCTION 0x480 + +#define FIXED_CODE_END 0x490 + +#endif diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h new file mode 100644 index 00000000000..e70074e05f4 --- /dev/null +++ b/arch/blackfin/include/asm/flat.h @@ -0,0 +1,58 @@ +/* + * include/asm-blackfin/flat.h -- uClinux flat-format executables + * + * Copyright (C) 2003, + * + */ + +#ifndef __BLACKFIN_FLAT_H__ +#define __BLACKFIN_FLAT_H__ + +#include <asm/unaligned.h> + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) + +extern unsigned long bfin_get_addr_from_rp (unsigned long *ptr, + unsigned long relval, + unsigned long flags, + unsigned long *persistent); + +extern void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr, + unsigned long relval); + +/* The amount by which a relocation can exceed the program image limits + without being regarded as an error. */ + +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) + +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + bfin_get_addr_from_rp(rp, relval, flags, persistent) +#define flat_put_addr_at_rp(rp, val, relval) \ + bfin_put_addr_at_rp(rp, val, relval) + +/* Convert a relocation entry into an address. */ +static inline unsigned long +flat_get_relocate_addr (unsigned long relval) +{ + return relval & 0x03ffffff; /* Mask out top 6 bits */ +} + +static inline int flat_set_persistent(unsigned long relval, + unsigned long *persistent) +{ + int type = (relval >> 26) & 7; + if (type == 3) { + *persistent = relval << 16; + return 1; + } + return 0; +} + +static inline int flat_addr_absolute(unsigned long relval) +{ + return (relval & (1 << 29)) != 0; +} + +#endif /* __BLACKFIN_FLAT_H__ */ diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h new file mode 100644 index 00000000000..6a332a9f099 --- /dev/null +++ b/arch/blackfin/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <asm-generic/futex.h> + +#endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h new file mode 100644 index 00000000000..ad33ac271fd --- /dev/null +++ b/arch/blackfin/include/asm/gpio.h @@ -0,0 +1,456 @@ +/* + * File: arch/blackfin/kernel/bfin_gpio.h + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +* Number BF537/6/4 BF561 BF533/2/1 +* BF527/5/2 +* +* GPIO_0 PF0 PF0 PF0 +* GPIO_1 PF1 PF1 PF1 +* GPIO_2 PF2 PF2 PF2 +* GPIO_3 PF3 PF3 PF3 +* GPIO_4 PF4 PF4 PF4 +* GPIO_5 PF5 PF5 PF5 +* GPIO_6 PF6 PF6 PF6 +* GPIO_7 PF7 PF7 PF7 +* GPIO_8 PF8 PF8 PF8 +* GPIO_9 PF9 PF9 PF9 +* GPIO_10 PF10 PF10 PF10 +* GPIO_11 PF11 PF11 PF11 +* GPIO_12 PF12 PF12 PF12 +* GPIO_13 PF13 PF13 PF13 +* GPIO_14 PF14 PF14 PF14 +* GPIO_15 PF15 PF15 PF15 +* GPIO_16 PG0 PF16 +* GPIO_17 PG1 PF17 +* GPIO_18 PG2 PF18 +* GPIO_19 PG3 PF19 +* GPIO_20 PG4 PF20 +* GPIO_21 PG5 PF21 +* GPIO_22 PG6 PF22 +* GPIO_23 PG7 PF23 +* GPIO_24 PG8 PF24 +* GPIO_25 PG9 PF25 +* GPIO_26 PG10 PF26 +* GPIO_27 PG11 PF27 +* GPIO_28 PG12 PF28 +* GPIO_29 PG13 PF29 +* GPIO_30 PG14 PF30 +* GPIO_31 PG15 PF31 +* GPIO_32 PH0 PF32 +* GPIO_33 PH1 PF33 +* GPIO_34 PH2 PF34 +* GPIO_35 PH3 PF35 +* GPIO_36 PH4 PF36 +* GPIO_37 PH5 PF37 +* GPIO_38 PH6 PF38 +* GPIO_39 PH7 PF39 +* GPIO_40 PH8 PF40 +* GPIO_41 PH9 PF41 +* GPIO_42 PH10 PF42 +* GPIO_43 PH11 PF43 +* GPIO_44 PH12 PF44 +* GPIO_45 PH13 PF45 +* GPIO_46 PH14 PF46 +* GPIO_47 PH15 PF47 +*/ + +#ifndef __ARCH_BLACKFIN_GPIO_H__ +#define __ARCH_BLACKFIN_GPIO_H__ + +#define gpio_bank(x) ((x) >> 4) +#define gpio_bit(x) (1<<((x) & 0xF)) +#define gpio_sub_n(x) ((x) & 0xF) + +#define GPIO_BANKSIZE 16 + +#define GPIO_0 0 +#define GPIO_1 1 +#define GPIO_2 2 +#define GPIO_3 3 +#define GPIO_4 4 +#define GPIO_5 5 +#define GPIO_6 6 +#define GPIO_7 7 +#define GPIO_8 8 +#define GPIO_9 9 +#define GPIO_10 10 +#define GPIO_11 11 +#define GPIO_12 12 +#define GPIO_13 13 +#define GPIO_14 14 +#define GPIO_15 15 +#define GPIO_16 16 +#define GPIO_17 17 +#define GPIO_18 18 +#define GPIO_19 19 +#define GPIO_20 20 +#define GPIO_21 21 +#define GPIO_22 22 +#define GPIO_23 23 +#define GPIO_24 24 +#define GPIO_25 25 +#define GPIO_26 26 +#define GPIO_27 27 +#define GPIO_28 28 +#define GPIO_29 29 +#define GPIO_30 30 +#define GPIO_31 31 +#define GPIO_32 32 +#define GPIO_33 33 +#define GPIO_34 34 +#define GPIO_35 35 +#define GPIO_36 36 +#define GPIO_37 37 +#define GPIO_38 38 +#define GPIO_39 39 +#define GPIO_40 40 +#define GPIO_41 41 +#define GPIO_42 42 +#define GPIO_43 43 +#define GPIO_44 44 +#define GPIO_45 45 +#define GPIO_46 46 +#define GPIO_47 47 + + +#define PERIPHERAL_USAGE 1 +#define GPIO_USAGE 0 + +#ifdef BF533_FAMILY +#define MAX_BLACKFIN_GPIOS 16 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 + +#endif + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif + +#ifdef BF548_FAMILY +#include <mach/gpio.h> +#endif + +#ifdef BF561_FAMILY +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PF16 16 +#define GPIO_PF17 17 +#define GPIO_PF18 18 +#define GPIO_PF19 19 +#define GPIO_PF20 20 +#define GPIO_PF21 21 +#define GPIO_PF22 22 +#define GPIO_PF23 23 +#define GPIO_PF24 24 +#define GPIO_PF25 25 +#define GPIO_PF26 26 +#define GPIO_PF27 27 +#define GPIO_PF28 28 +#define GPIO_PF29 29 +#define GPIO_PF30 30 +#define GPIO_PF31 31 +#define GPIO_PF32 32 +#define GPIO_PF33 33 +#define GPIO_PF34 34 +#define GPIO_PF35 35 +#define GPIO_PF36 36 +#define GPIO_PF37 37 +#define GPIO_PF38 38 +#define GPIO_PF39 39 +#define GPIO_PF40 40 +#define GPIO_PF41 41 +#define GPIO_PF42 42 +#define GPIO_PF43 43 +#define GPIO_PF44 44 +#define GPIO_PF45 45 +#define GPIO_PF46 46 +#define GPIO_PF47 47 + +#define PORT_FIO0 GPIO_0 +#define PORT_FIO1 GPIO_16 +#define PORT_FIO2 GPIO_32 +#endif + +#ifndef __ASSEMBLY__ + +/*********************************************************** +* +* FUNCTIONS: Blackfin General Purpose Ports Access Functions +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: These functions abstract direct register access +* to Blackfin processor General Purpose +* Ports Regsiters +* +* CAUTION: These functions do not belong to the GPIO Driver API +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +#ifndef BF548_FAMILY +void set_gpio_dir(unsigned, unsigned short); +void set_gpio_inen(unsigned, unsigned short); +void set_gpio_polar(unsigned, unsigned short); +void set_gpio_edge(unsigned, unsigned short); +void set_gpio_both(unsigned, unsigned short); +void set_gpio_data(unsigned, unsigned short); +void set_gpio_maska(unsigned, unsigned short); +void set_gpio_maskb(unsigned, unsigned short); +void set_gpio_toggle(unsigned); +void set_gpiop_dir(unsigned, unsigned short); +void set_gpiop_inen(unsigned, unsigned short); +void set_gpiop_polar(unsigned, unsigned short); +void set_gpiop_edge(unsigned, unsigned short); +void set_gpiop_both(unsigned, unsigned short); +void set_gpiop_data(unsigned, unsigned short); +void set_gpiop_maska(unsigned, unsigned short); +void set_gpiop_maskb(unsigned, unsigned short); +unsigned short get_gpio_dir(unsigned); +unsigned short get_gpio_inen(unsigned); +unsigned short get_gpio_polar(unsigned); +unsigned short get_gpio_edge(unsigned); +unsigned short get_gpio_both(unsigned); +unsigned short get_gpio_maska(unsigned); +unsigned short get_gpio_maskb(unsigned); +unsigned short get_gpio_data(unsigned); +unsigned short get_gpiop_dir(unsigned); +unsigned short get_gpiop_inen(unsigned); +unsigned short get_gpiop_polar(unsigned); +unsigned short get_gpiop_edge(unsigned); +unsigned short get_gpiop_both(unsigned); +unsigned short get_gpiop_maska(unsigned); +unsigned short get_gpiop_maskb(unsigned); +unsigned short get_gpiop_data(unsigned); + +struct gpio_port_t { + unsigned short data; + unsigned short dummy1; + unsigned short data_clear; + unsigned short dummy2; + unsigned short data_set; + unsigned short dummy3; + unsigned short toggle; + unsigned short dummy4; + unsigned short maska; + unsigned short dummy5; + unsigned short maska_clear; + unsigned short dummy6; + unsigned short maska_set; + unsigned short dummy7; + unsigned short maska_toggle; + unsigned short dummy8; + unsigned short maskb; + unsigned short dummy9; + unsigned short maskb_clear; + unsigned short dummy10; + unsigned short maskb_set; + unsigned short dummy11; + unsigned short maskb_toggle; + unsigned short dummy12; + unsigned short dir; + unsigned short dummy13; + unsigned short polar; + unsigned short dummy14; + unsigned short edge; + unsigned short dummy15; + unsigned short both; + unsigned short dummy16; + unsigned short inen; +}; +#endif + +#ifdef CONFIG_PM + +unsigned int bfin_pm_standby_setup(void); +void bfin_pm_standby_restore(void); + +void bfin_gpio_pm_hibernate_restore(void); +void bfin_gpio_pm_hibernate_suspend(void); + +#ifndef CONFIG_BF54x +#define PM_WAKE_RISING 0x1 +#define PM_WAKE_FALLING 0x2 +#define PM_WAKE_HIGH 0x4 +#define PM_WAKE_LOW 0x8 +#define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING) +#define PM_WAKE_IGNORE 0xF0 + +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type); +void gpio_pm_wakeup_free(unsigned gpio); + +struct gpio_port_s { + unsigned short data; + unsigned short maska; + unsigned short maskb; + unsigned short dir; + unsigned short polar; + unsigned short edge; + unsigned short both; + unsigned short inen; + + unsigned short fer; + unsigned short reserved; + unsigned short mux; +}; +#endif /*CONFIG_BF54x*/ +#endif /*CONFIG_PM*/ +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int gpio_request(unsigned, const char *); +void gpio_free(unsigned); + +void gpio_set_value(unsigned gpio, int arg); +int gpio_get_value(unsigned gpio); + +#ifndef BF548_FAMILY +#define gpio_set_value(gpio, value) set_gpio_data(gpio, value) +#endif + +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); + +#include <asm-generic/gpio.h> /* cansleep wrappers */ +#include <asm/irq.h> + +static inline int gpio_to_irq(unsigned gpio) +{ + return (gpio + GPIO_IRQ_BASE); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return (irq - GPIO_IRQ_BASE); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h new file mode 100644 index 00000000000..0520d2aac8f --- /dev/null +++ b/arch/blackfin/include/asm/gptimers.h @@ -0,0 +1,191 @@ +/* + * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * Copyright (C) 2005 John DeHority + * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) + * + * Licensed under the GPL-2. + */ + +#ifndef _BLACKFIN_TIMERS_H_ +#define _BLACKFIN_TIMERS_H_ + +#include <linux/types.h> +#include <asm/blackfin.h> + +/* + * BF537/BF527: 8 timers: + */ +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +# define MAX_BLACKFIN_GPTIMERS 8 +# define TIMER0_GROUP_REG TIMER_ENABLE +#endif +/* + * BF54x: 11 timers (BF542: 8 timers): + */ +#if defined(BF548_FAMILY) +# ifdef CONFIG_BF542 +# define MAX_BLACKFIN_GPTIMERS 8 +# else +# define MAX_BLACKFIN_GPTIMERS 11 +# define TIMER8_GROUP_REG TIMER_ENABLE1 +# endif +# define TIMER0_GROUP_REG TIMER_ENABLE0 +#endif +/* + * BF561: 12 timers: + */ +#if defined(CONFIG_BF561) +# define MAX_BLACKFIN_GPTIMERS 12 +# define TIMER0_GROUP_REG TMRS8_ENABLE +# define TIMER8_GROUP_REG TMRS4_ENABLE +#endif +/* + * All others: 3 timers: + */ +#if !defined(MAX_BLACKFIN_GPTIMERS) +# define MAX_BLACKFIN_GPTIMERS 3 +# define TIMER0_GROUP_REG TIMER_ENABLE +#endif + +#define BLACKFIN_GPTIMER_IDMASK ((1UL << MAX_BLACKFIN_GPTIMERS) - 1) +#define BFIN_TIMER_OCTET(x) ((x) >> 3) + +/* used in masks for timer_enable() and timer_disable() */ +#define TIMER0bit 0x0001 /* 0001b */ +#define TIMER1bit 0x0002 /* 0010b */ +#define TIMER2bit 0x0004 /* 0100b */ +#define TIMER3bit 0x0008 +#define TIMER4bit 0x0010 +#define TIMER5bit 0x0020 +#define TIMER6bit 0x0040 +#define TIMER7bit 0x0080 +#define TIMER8bit 0x0100 +#define TIMER9bit 0x0200 +#define TIMER10bit 0x0400 +#define TIMER11bit 0x0800 + +#define TIMER0_id 0 +#define TIMER1_id 1 +#define TIMER2_id 2 +#define TIMER3_id 3 +#define TIMER4_id 4 +#define TIMER5_id 5 +#define TIMER6_id 6 +#define TIMER7_id 7 +#define TIMER8_id 8 +#define TIMER9_id 9 +#define TIMER10_id 10 +#define TIMER11_id 11 + +/* associated timers for ppi framesync: */ + +#if defined(CONFIG_BF561) +# define FS0_1_TIMER_ID TIMER8_id +# define FS0_2_TIMER_ID TIMER9_id +# define FS1_1_TIMER_ID TIMER10_id +# define FS1_2_TIMER_ID TIMER11_id +# define FS0_1_TIMER_BIT TIMER8bit +# define FS0_2_TIMER_BIT TIMER9bit +# define FS1_1_TIMER_BIT TIMER10bit +# define FS1_2_TIMER_BIT TIMER11bit +# undef FS1_TIMER_ID +# undef FS2_TIMER_ID +# undef FS1_TIMER_BIT +# undef FS2_TIMER_BIT +#else +# define FS1_TIMER_ID TIMER0_id +# define FS2_TIMER_ID TIMER1_id +# define FS1_TIMER_BIT TIMER0bit +# define FS2_TIMER_BIT TIMER1bit +#endif + +/* + * Timer Configuration Register Bits + */ +#define TIMER_ERR 0xC000 +#define TIMER_ERR_OVFL 0x4000 +#define TIMER_ERR_PROG_PER 0x8000 +#define TIMER_ERR_PROG_PW 0xC000 +#define TIMER_EMU_RUN 0x0200 +#define TIMER_TOGGLE_HI 0x0100 +#define TIMER_CLK_SEL 0x0080 +#define TIMER_OUT_DIS 0x0040 +#define TIMER_TIN_SEL 0x0020 +#define TIMER_IRQ_ENA 0x0010 +#define TIMER_PERIOD_CNT 0x0008 +#define TIMER_PULSE_HI 0x0004 +#define TIMER_MODE 0x0003 +#define TIMER_MODE_PWM 0x0001 +#define TIMER_MODE_WDTH 0x0002 +#define TIMER_MODE_EXT_CLK 0x0003 + +/* + * Timer Status Register Bits + */ +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#define TIMER_STATUS_TIMIL3 0x00000008 +#define TIMER_STATUS_TIMIL4 0x00010000 +#define TIMER_STATUS_TIMIL5 0x00020000 +#define TIMER_STATUS_TIMIL6 0x00040000 +#define TIMER_STATUS_TIMIL7 0x00080000 +#define TIMER_STATUS_TIMIL8 0x0001 +#define TIMER_STATUS_TIMIL9 0x0002 +#define TIMER_STATUS_TIMIL10 0x0004 +#define TIMER_STATUS_TIMIL11 0x0008 + +#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0020 +#define TIMER_STATUS_TOVF2 0x0040 +#define TIMER_STATUS_TOVF3 0x00000080 +#define TIMER_STATUS_TOVF4 0x00100000 +#define TIMER_STATUS_TOVF5 0x00200000 +#define TIMER_STATUS_TOVF6 0x00400000 +#define TIMER_STATUS_TOVF7 0x00800000 +#define TIMER_STATUS_TOVF8 0x0010 +#define TIMER_STATUS_TOVF9 0x0020 +#define TIMER_STATUS_TOVF10 0x0040 +#define TIMER_STATUS_TOVF11 0x0080 + +/* + * Timer Slave Enable Status : write 1 to clear + */ +#define TIMER_STATUS_TRUN0 0x1000 +#define TIMER_STATUS_TRUN1 0x2000 +#define TIMER_STATUS_TRUN2 0x4000 +#define TIMER_STATUS_TRUN3 0x00008000 +#define TIMER_STATUS_TRUN4 0x10000000 +#define TIMER_STATUS_TRUN5 0x20000000 +#define TIMER_STATUS_TRUN6 0x40000000 +#define TIMER_STATUS_TRUN7 0x80000000 +#define TIMER_STATUS_TRUN 0xF000F000 +#define TIMER_STATUS_TRUN8 0x1000 +#define TIMER_STATUS_TRUN9 0x2000 +#define TIMER_STATUS_TRUN10 0x4000 +#define TIMER_STATUS_TRUN11 0x8000 + +/* The actual gptimer API */ + +void set_gptimer_pwidth (int timer_id, uint32_t width); +uint32_t get_gptimer_pwidth (int timer_id); +void set_gptimer_period (int timer_id, uint32_t period); +uint32_t get_gptimer_period (int timer_id); +uint32_t get_gptimer_count (int timer_id); +uint16_t get_gptimer_intr (int timer_id); +void clear_gptimer_intr (int timer_id); +uint16_t get_gptimer_over (int timer_id); +void clear_gptimer_over (int timer_id); +void set_gptimer_config (int timer_id, uint16_t config); +uint16_t get_gptimer_config (int timer_id); +void set_gptimer_pulse_hi (int timer_id); +void clear_gptimer_pulse_hi(int timer_id); +void enable_gptimers (uint16_t mask); +void disable_gptimers (uint16_t mask); +uint16_t get_enabled_gptimers (void); +uint32_t get_gptimer_status (int group); +void set_gptimer_status (int group, uint32_t value); + +#endif diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h new file mode 100644 index 00000000000..b6b19f1b9da --- /dev/null +++ b/arch/blackfin/include/asm/hardirq.h @@ -0,0 +1,45 @@ +#ifndef __BFIN_HARDIRQ_H +#define __BFIN_HARDIRQ_H + +#include <linux/cache.h> +#include <linux/threads.h> +#include <asm/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int __syscall_count; + struct task_struct *__ksoftirqd_task; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +/* + * We put the hardirq and softirq counter into the preemption + * counter. The bitmask has the following meaning: + * + * - bits 0-7 are the preemption count (max preemption depth: 256) + * - bits 8-15 are the softirq count (max # of softirqs: 256) + * - bits 16-23 are the hardirq count (max # of hardirqs: 256) + * + * - ( bit 26 is the PREEMPT_ACTIVE flag. ) + * + * PREEMPT_MASK: 0x000000ff + * HARDIRQ_MASK: 0x0000ff00 + * SOFTIRQ_MASK: 0x00ff0000 + */ + +#if NR_IRQS > 256 +#define HARDIRQ_BITS 9 +#else +#define HARDIRQ_BITS 8 +#endif + +#ifdef NR_IRQS +# if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +# endif +#endif + +#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 + +#endif diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h new file mode 100644 index 00000000000..5b51eaec012 --- /dev/null +++ b/arch/blackfin/include/asm/hw_irq.h @@ -0,0 +1,6 @@ +#ifndef __ASM_BFIN_HW_IRQ_H +#define __ASM_BFIN_HW_IRQ_H + +/* Dummy include. */ + +#endif diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h new file mode 100644 index 00000000000..cbbf7ffdbbf --- /dev/null +++ b/arch/blackfin/include/asm/io.h @@ -0,0 +1,212 @@ +#ifndef _BFIN_IO_H +#define _BFIN_IO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#endif +#include <linux/compiler.h> + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the bfin architecture, we just read/write the + * memory location directly. + */ +#ifndef __ASSEMBLY__ + +static inline unsigned char readb(const volatile void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = b [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned char) val; +} + +static inline unsigned short readw(const volatile void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = w [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned short) val; +} + +static inline unsigned int readl(const volatile void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = [%2];\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + return val; +} + +#endif /* __ASSEMBLY__ */ + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define ioread8_rep(a,d,c) insb(a,d,c) +#define ioread16_rep(a,d,c) insw(a,d,c) +#define ioread32_rep(a,d,c) insl(a,d,c) +#define iowrite8_rep(a,s,c) outsb(a,s,c) +#define iowrite16_rep(a,s,c) outsw(a,s,c) +#define iowrite32_rep(a,s,c) outsl(a,s,c) + +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) + +#define IO_SPACE_LIMIT 0xffffffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_NOCACHE_SER 1 + +#ifndef __ASSEMBLY__ + +extern void outsb(unsigned long port, const void *addr, unsigned long count); +extern void outsw(unsigned long port, const void *addr, unsigned long count); +extern void outsw_8(unsigned long port, const void *addr, unsigned long count); +extern void outsl(unsigned long port, const void *addr, unsigned long count); + +extern void insb(unsigned long port, void *addr, unsigned long count); +extern void insw(unsigned long port, void *addr, unsigned long count); +extern void insw_8(unsigned long port, void *addr, unsigned long count); +extern void insl(unsigned long port, void *addr, unsigned long count); +extern void insl_16(unsigned long port, void *addr, unsigned long count); + +extern void dma_outsb(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsw(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsl(unsigned long port, const void *addr, unsigned short count); + +extern void dma_insb(unsigned long port, void *addr, unsigned short count); +extern void dma_insw(unsigned long port, void *addr, unsigned short count); +extern void dma_insl(unsigned long port, void *addr, unsigned short count); + +/* + * Map some physical address range into the kernel address space. + */ +static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag) +{ + return (void __iomem *)physaddr; +} + +/* + * Unmap a ioremap()ed region again + */ +static inline void iounmap(void *addr) +{ +} + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +static inline void __iounmap(void *addr, unsigned long size) +{ +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +static inline void kernel_set_cachemode(void *addr, unsigned long size, + int cmode) +{ +} + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void __iomem *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +extern void blkfin_inv_cache_all(void); + +#endif + +#define ioport_map(port, nr) ((void __iomem*)(port)) +#define ioport_unmap(addr) + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _BFIN_IO_H */ diff --git a/arch/blackfin/include/asm/ioctl.h b/arch/blackfin/include/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/blackfin/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h new file mode 100644 index 00000000000..895e3173165 --- /dev/null +++ b/arch/blackfin/include/asm/ioctls.h @@ -0,0 +1,87 @@ +#ifndef __ARCH_BFIN_IOCTLS_H__ +#define __ARCH_BFIN_IOCTLS_H__ + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +/* Get Pty Number (of pty-mux device) */ +#define TIOCGPTN _IOR('T', 0x30, unsigned int) +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_BFIN_IOCTLS_H__ */ diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h new file mode 100644 index 00000000000..8f0899cdf4d --- /dev/null +++ b/arch/blackfin/include/asm/ipcbuf.h @@ -0,0 +1,30 @@ +/* Changes origined from m68k version. Lineo Inc. May 2001 */ + +#ifndef __BFIN_IPCBUF_H__ +#define __BFIN_IPCBUF_H__ + +/* + * The user_ipc_perm structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm { + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __BFIN_IPCBUF_H__ */ diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h new file mode 100644 index 00000000000..89f59e18af9 --- /dev/null +++ b/arch/blackfin/include/asm/irq.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + */ + +#ifndef _BFIN_IRQ_H_ +#define _BFIN_IRQ_H_ + +#include <mach/irq.h> +#include <asm/ptrace.h> + +/******************************************************************************* + ***** INTRODUCTION *********** + * On the Blackfin, the interrupt structure allows remmapping of the hardware + * levels. + * - I'm going to assume that the H/W level is going to stay at the default + * settings. If someone wants to go through and abstart this out, feel free + * to mod the interrupt numbering scheme. + * - I'm abstracting the interrupts so that uClinux does not know anything + * about the H/W levels. If you want to change the H/W AND keep the abstracted + * levels that uClinux sees, you should be able to do most of it here. + * - I've left the "abstract" numbering sparce in case someone wants to pull the + * interrupts apart (just the TX/RX for the various devices) + *******************************************************************************/ + +/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/ + +/* + * Machine specific interrupt sources. + * + * Adding an interrupt service routine for a source with this bit + * set indicates a special machine specific interrupt source. + * The machine specific files define these sources. + * + * The IRQ_MACHSPEC bit is now gone - the only thing it did was to + * introduce unnecessary overhead. + * + * All interrupt handling is actually machine specific so it is better + * to use function pointers, as used by the Sparc port, and select the + * interrupt handling functions when initializing the kernel. This way + * we save some unnecessary overhead at run-time. + * 01/11/97 - Jes + */ + +extern void ack_bad_irq(unsigned int irq); + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + +/* count of spurious interrupts */ +/* extern volatile unsigned int num_spurious; */ + +#ifndef NO_IRQ +#define NO_IRQ ((unsigned int)(-1)) +#endif + +#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) + +#endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h new file mode 100644 index 00000000000..139b5208f9d --- /dev/null +++ b/arch/blackfin/include/asm/irq_handler.h @@ -0,0 +1,33 @@ +#ifndef _IRQ_HANDLER_H +#define _IRQ_HANDLER_H + +#include <linux/types.h> +#include <linux/linkage.h> + +/* BASE LEVEL interrupt handler routines */ +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_nmi(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +asmlinkage void init_exception_buff(void); +asmlinkage void trap_c(struct pt_regs *fp); +asmlinkage void ex_replaceable(void); +asmlinkage void early_trap(void); + +extern void *ex_table[]; +extern void return_from_exception(void); + +extern int bfin_request_exception(unsigned int exception, void (*handler)(void)); +extern int bfin_free_exception(unsigned int exception, void (*handler)(void)); + +#endif diff --git a/arch/blackfin/include/asm/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h new file mode 100644 index 00000000000..3dd9c0b7027 --- /dev/null +++ b/arch/blackfin/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/blackfin/include/asm/kdebug.h b/arch/blackfin/include/asm/kdebug.h new file mode 100644 index 00000000000..6ece1b03766 --- /dev/null +++ b/arch/blackfin/include/asm/kdebug.h @@ -0,0 +1 @@ +#include <asm-generic/kdebug.h> diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h new file mode 100644 index 00000000000..0f73847fd6b --- /dev/null +++ b/arch/blackfin/include/asm/kgdb.h @@ -0,0 +1,184 @@ +/* + * File: include/asm-blackfin/kgdb.h + * Based on: + * Author: Sonic Zhang + * + * Created: + * Description: + * + * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ + * + * Modified: + * Copyright 2005-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __ASM_BLACKFIN_KGDB_H__ +#define __ASM_BLACKFIN_KGDB_H__ + +#include <linux/ptrace.h> + +/* gdb locks */ +#define KGDB_MAX_NO_CPUS 8 + +/************************************************************************/ +/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ +/* at least NUMREGBYTES*2 are needed for register packets */ +/* Longer buffer is needed to list all threads */ +#define BUFMAX 2048 + +/* + * Note that this register image is different from + * the register image that Linux produces at interrupt time. + * + * Linux's register image is defined by struct pt_regs in ptrace.h. + */ +enum regnames { + /* Core Registers */ + BFIN_R0 = 0, + BFIN_R1, + BFIN_R2, + BFIN_R3, + BFIN_R4, + BFIN_R5, + BFIN_R6, + BFIN_R7, + BFIN_P0, + BFIN_P1, + BFIN_P2, + BFIN_P3, + BFIN_P4, + BFIN_P5, + BFIN_SP, + BFIN_FP, + BFIN_I0, + BFIN_I1, + BFIN_I2, + BFIN_I3, + BFIN_M0, + BFIN_M1, + BFIN_M2, + BFIN_M3, + BFIN_B0, + BFIN_B1, + BFIN_B2, + BFIN_B3, + BFIN_L0, + BFIN_L1, + BFIN_L2, + BFIN_L3, + BFIN_A0_DOT_X, + BFIN_A0_DOT_W, + BFIN_A1_DOT_X, + BFIN_A1_DOT_W, + BFIN_ASTAT, + BFIN_RETS, + BFIN_LC0, + BFIN_LT0, + BFIN_LB0, + BFIN_LC1, + BFIN_LT1, + BFIN_LB1, + BFIN_CYCLES, + BFIN_CYCLES2, + BFIN_USP, + BFIN_SEQSTAT, + BFIN_SYSCFG, + BFIN_RETI, + BFIN_RETX, + BFIN_RETN, + BFIN_RETE, + + /* Pseudo Registers */ + BFIN_PC, + BFIN_CC, + BFIN_EXTRA1, /* Address of .text section. */ + BFIN_EXTRA2, /* Address of .data section. */ + BFIN_EXTRA3, /* Address of .bss section. */ + BFIN_FDPIC_EXEC, + BFIN_FDPIC_INTERP, + + /* MMRs */ + BFIN_IPEND, + + /* LAST ENTRY SHOULD NOT BE CHANGED. */ + BFIN_NUM_REGS /* The number of all registers. */ +}; + +/* Number of bytes of registers. */ +#define NUMREGBYTES BFIN_NUM_REGS*4 + +#define BREAKPOINT() asm(" EXCPT 2;"); +#define BREAK_INSTR_SIZE 2 +#define HW_BREAKPOINT_NUM 6 + +/* Instruction watchpoint address control register bits mask */ +#define WPPWR 0x1 +#define WPIREN01 0x2 +#define WPIRINV01 0x4 +#define WPIAEN0 0x8 +#define WPIAEN1 0x10 +#define WPICNTEN0 0x20 +#define WPICNTEN1 0x40 +#define EMUSW0 0x80 +#define EMUSW1 0x100 +#define WPIREN23 0x200 +#define WPIRINV23 0x400 +#define WPIAEN2 0x800 +#define WPIAEN3 0x1000 +#define WPICNTEN2 0x2000 +#define WPICNTEN3 0x4000 +#define EMUSW2 0x8000 +#define EMUSW3 0x10000 +#define WPIREN45 0x20000 +#define WPIRINV45 0x40000 +#define WPIAEN4 0x80000 +#define WPIAEN5 0x100000 +#define WPICNTEN4 0x200000 +#define WPICNTEN5 0x400000 +#define EMUSW4 0x800000 +#define EMUSW5 0x1000000 +#define WPAND 0x2000000 + +/* Data watchpoint address control register bits mask */ +#define WPDREN01 0x1 +#define WPDRINV01 0x2 +#define WPDAEN0 0x4 +#define WPDAEN1 0x8 +#define WPDCNTEN0 0x10 +#define WPDCNTEN1 0x20 +#define WPDSRC0 0xc0 +#define WPDACC0 0x300 +#define WPDSRC1 0xc00 +#define WPDACC1 0x3000 + +/* Watchpoint status register bits mask */ +#define STATIA0 0x1 +#define STATIA1 0x2 +#define STATIA2 0x4 +#define STATIA3 0x8 +#define STATIA4 0x10 +#define STATIA5 0x20 +#define STATDA0 0x40 +#define STATDA1 0x80 + +extern void kgdb_print(const char *fmt, ...); +extern void init_kgdb_uart(void); + +#endif diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h new file mode 100644 index 00000000000..e215f710497 --- /dev/null +++ b/arch/blackfin/include/asm/kmap_types.h @@ -0,0 +1,21 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h new file mode 100644 index 00000000000..c13ded77782 --- /dev/null +++ b/arch/blackfin/include/asm/l1layout.h @@ -0,0 +1,31 @@ +/* + * l1layout.h + * Defines a layout of L1 scratchpad memory that userspace can rely on. + */ + +#ifndef _L1LAYOUT_H_ +#define _L1LAYOUT_H_ + +#include <asm/blackfin.h> + +#ifndef __ASSEMBLY__ + +/* Data that is "mapped" into the process VM at the start of the L1 scratch + memory, so that each process can access it at a fixed address. Used for + stack checking. */ +struct l1_scratch_task_info +{ + /* Points to the start of the stack. */ + void *stack_start; + /* Not updated by the kernel; a user process can modify this to + keep track of the lowest address of the stack pointer during its + runtime. */ + void *lowest_sp; +}; + +/* A pointer to the structure in memory. */ +#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START) + +#endif + +#endif diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h new file mode 100644 index 00000000000..5a822bb790f --- /dev/null +++ b/arch/blackfin/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h new file mode 100644 index 00000000000..75afffbc642 --- /dev/null +++ b/arch/blackfin/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef __BLACKFIN_LOCAL_H +#define __BLACKFIN_LOCAL_H + +#include <asm-generic/local.h> + +#endif /* __BLACKFIN_LOCAL_H */ diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h new file mode 100644 index 00000000000..88d04a70770 --- /dev/null +++ b/arch/blackfin/include/asm/mem_map.h @@ -0,0 +1,12 @@ +/* + * mem_map.h + * Common header file for blackfin family of processors. + * + */ + +#ifndef _MEM_MAP_H_ +#define _MEM_MAP_H_ + +#include <mach/mem_map.h> + +#endif /* _MEM_MAP_H_ */ diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h new file mode 100644 index 00000000000..b58f5ad3f02 --- /dev/null +++ b/arch/blackfin/include/asm/mman.h @@ -0,0 +1,43 @@ +#ifndef __BFIN_MMAN_H__ +#define __BFIN_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __BFIN_MMAN_H__ */ diff --git a/arch/blackfin/include/asm/mmu.h b/arch/blackfin/include/asm/mmu.h new file mode 100644 index 00000000000..757e43906ed --- /dev/null +++ b/arch/blackfin/include/asm/mmu.h @@ -0,0 +1,32 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ + +struct sram_list_struct { + struct sram_list_struct *next; + void *addr; + size_t length; +}; + +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; + unsigned long stack_start; + + /* Points to the location in SDRAM where the L1 stack is normally + saved, or NULL if the stack is always in SDRAM. */ + void *l1_stack_save; + + struct sram_list_struct *sram_list; + +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif +#ifdef CONFIG_MPU + unsigned long *page_rwx_mask; +#endif +} mm_context_t; + +#endif diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h new file mode 100644 index 00000000000..8529552a981 --- /dev/null +++ b/arch/blackfin/include/asm/mmu_context.h @@ -0,0 +1,183 @@ +/* + * File: include/asm-blackfin/mmu_context.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __BLACKFIN_MMU_CONTEXT_H__ +#define __BLACKFIN_MMU_CONTEXT_H__ + +#include <linux/gfp.h> +#include <linux/sched.h> +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/cplbinit.h> + +extern void *current_l1_stack_save; +extern int nr_l1stack_tasks; +extern void *l1_stack_base; +extern unsigned long l1_stack_len; + +extern int l1sram_free(const void*); +extern void *l1sram_alloc_max(void*); + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* Called when creating a new context during fork() or execve(). */ +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ +#ifdef CONFIG_MPU + unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order); + mm->context.page_rwx_mask = (unsigned long *)p; + memset(mm->context.page_rwx_mask, 0, + page_mask_nelts * 3 * sizeof(long)); +#endif + return 0; +} + +static inline void free_l1stack(void) +{ + nr_l1stack_tasks--; + if (nr_l1stack_tasks == 0) + l1sram_free(l1_stack_base); +} +static inline void destroy_context(struct mm_struct *mm) +{ + struct sram_list_struct *tmp; + + if (current_l1_stack_save == mm->context.l1_stack_save) + current_l1_stack_save = NULL; + if (mm->context.l1_stack_save) + free_l1stack(); + + while ((tmp = mm->context.sram_list)) { + mm->context.sram_list = tmp->next; + sram_free(tmp->addr); + kfree(tmp); + } +#ifdef CONFIG_MPU + if (current_rwx_mask == mm->context.page_rwx_mask) + current_rwx_mask = NULL; + free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order); +#endif +} + +static inline unsigned long +alloc_l1stack(unsigned long length, unsigned long *stack_base) +{ + if (nr_l1stack_tasks == 0) { + l1_stack_base = l1sram_alloc_max(&l1_stack_len); + if (!l1_stack_base) + return 0; + } + + if (l1_stack_len < length) { + if (nr_l1stack_tasks == 0) + l1sram_free(l1_stack_base); + return 0; + } + *stack_base = (unsigned long)l1_stack_base; + nr_l1stack_tasks++; + return l1_stack_len; +} + +static inline int +activate_l1stack(struct mm_struct *mm, unsigned long sp_base) +{ + if (current_l1_stack_save) + memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len); + mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base; + memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); + return 1; +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +#define activate_mm(prev, next) switch_mm(prev, next, NULL) + +static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *tsk) +{ + if (prev_mm == next_mm) + return; +#ifdef CONFIG_MPU + if (prev_mm->context.page_rwx_mask == current_rwx_mask) { + flush_switched_cplbs(); + set_mask_dcplbs(next_mm->context.page_rwx_mask); + } +#endif + + /* L1 stack switching. */ + if (!next_mm->context.l1_stack_save) + return; + if (next_mm->context.l1_stack_save == current_l1_stack_save) + return; + if (current_l1_stack_save) { + memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len); + } + current_l1_stack_save = next_mm->context.l1_stack_save; + memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); +} + +#ifdef CONFIG_MPU +static inline void protect_page(struct mm_struct *mm, unsigned long addr, + unsigned long flags) +{ + unsigned long *mask = mm->context.page_rwx_mask; + unsigned long page = addr >> 12; + unsigned long idx = page >> 5; + unsigned long bit = 1 << (page & 31); + + if (flags & VM_MAYREAD) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYWRITE) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYEXEC) + mask[idx] |= bit; + else + mask[idx] &= ~bit; +} + +static inline void update_protections(struct mm_struct *mm) +{ + if (mm->context.page_rwx_mask == current_rwx_mask) { + flush_switched_cplbs(); + set_mask_dcplbs(mm->context.page_rwx_mask); + } +} +#endif + +#endif diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h new file mode 100644 index 00000000000..e3128df139d --- /dev/null +++ b/arch/blackfin/include/asm/module.h @@ -0,0 +1,20 @@ +#ifndef _ASM_BFIN_MODULE_H +#define _ASM_BFIN_MODULE_H + +#define MODULE_SYMBOL_PREFIX "_" + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +struct mod_arch_specific { + Elf_Shdr *text_l1; + Elf_Shdr *data_a_l1; + Elf_Shdr *bss_a_l1; + Elf_Shdr *data_b_l1; + Elf_Shdr *bss_b_l1; + Elf_Shdr *text_l2; + Elf_Shdr *data_l2; + Elf_Shdr *bss_l2; +}; +#endif /* _ASM_BFIN_MODULE_H */ diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h new file mode 100644 index 00000000000..6fcbe8cd801 --- /dev/null +++ b/arch/blackfin/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _BFIN_MSGBUF_H +#define _BFIN_MSGBUF_H + +/* + * The msqid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _BFIN_MSGBUF_H */ diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h new file mode 100644 index 00000000000..458c1f7fbc1 --- /dev/null +++ b/arch/blackfin/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h new file mode 100644 index 00000000000..afbaafa793f --- /dev/null +++ b/arch/blackfin/include/asm/nand.h @@ -0,0 +1,47 @@ +/* linux/include/asm-blackfin/nand.h + * + * Copyright (c) 2007 Analog Devices, Inc. + * Bryan Wu <bryan.wu@analog.com> + * + * BF5XX - NAND flash controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* struct bf5xx_nand_platform + * + * define a interface between platfrom board specific code and + * bf54x NFC driver. + * + * nr_partitions = number of partitions pointed to be partitoons (or zero) + * partitions = mtd partition list + */ + +#define NFC_PG_SIZE_256 0 +#define NFC_PG_SIZE_512 1 +#define NFC_PG_SIZE_OFFSET 9 + +#define NFC_NWIDTH_8 0 +#define NFC_NWIDTH_16 1 +#define NFC_NWIDTH_OFFSET 8 + +#define NFC_RDDLY_OFFSET 4 +#define NFC_WRDLY_OFFSET 0 + +#define NFC_STAT_NBUSY 1 + +struct bf5xx_nand_platform { + /* NAND chip information */ + unsigned short page_size; + unsigned short data_width; + + /* RD/WR strobe delay timing information, all times in SCLK cycles */ + unsigned short rd_dly; + unsigned short wr_dly; + + /* NAND MTD partition information */ + int nr_partitions; + struct mtd_partition *partitions; +}; diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h new file mode 100644 index 00000000000..344f6a8c1f2 --- /dev/null +++ b/arch/blackfin/include/asm/page.h @@ -0,0 +1,88 @@ +#ifndef _BLACKFIN_PAGE_H +#define _BLACKFIN_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT 12 +#ifdef __ASSEMBLY__ +#define PAGE_SIZE (1 << PAGE_SHIFT) +#else +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#endif +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include <asm/setup.h> + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr,pg) clear_page(page) +#define copy_user_page(to, from, vaddr,pg) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { + unsigned long pte; +} pte_t; +typedef struct { + unsigned long pmd[16]; +} pmd_t; +typedef struct { + unsigned long pgd; +} pgd_t; +typedef struct { + unsigned long pgprot; +} pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include <asm/page_offset.h> +#include <asm/io.h> + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) + +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) +#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) + +#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) +#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#include <asm-generic/page.h> + +#endif /* __ASSEMBLY__ */ + +#endif /* _BLACKFIN_PAGE_H */ diff --git a/arch/blackfin/include/asm/page_offset.h b/arch/blackfin/include/asm/page_offset.h new file mode 100644 index 00000000000..cbaff24b4b2 --- /dev/null +++ b/arch/blackfin/include/asm/page_offset.h @@ -0,0 +1,6 @@ + +/* This handles the memory map.. */ + +#ifdef CONFIG_BLACKFIN +#define PAGE_OFFSET_RAW 0x00000000 +#endif diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h new file mode 100644 index 00000000000..41564a6347f --- /dev/null +++ b/arch/blackfin/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _BLACKFIN_PARAM_H +#define _BLACKFIN_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ 100 +#define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _BLACKFIN_PARAM_H */ diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h new file mode 100644 index 00000000000..61277358c86 --- /dev/null +++ b/arch/blackfin/include/asm/pci.h @@ -0,0 +1,148 @@ +/* Changed from asm-m68k version, Lineo Inc. May 2001 */ + +#ifndef _ASM_BFIN_PCI_H +#define _ASM_BFIN_PCI_H + +#include <asm/scatterlist.h> + +/* + * + * Written by Wout Klaren. + */ + +/* Added by Chang Junxiao */ +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x10000000 + +#define PCI_DMA_BUS_IS_PHYS (1) +struct pci_ops; + +/* + * Structure with hardware dependent information and functions of the + * PCI bus. + */ +struct pci_bus_info { + + /* + * Resources of the PCI bus. + */ + struct resource mem_space; + struct resource io_space; + + /* + * System dependent functions. + */ + struct pci_ops *bfin_pci_ops; + void (*fixup) (int pci_modify); + void (*conf_device) (unsigned char bus, unsigned char device_fn); +}; + +#define pcibios_assign_all_busses() 0 +static inline void pcibios_set_master(struct pci_dev *dev) +{ + + /* No special bus mastering setup handling */ +} +static inline void pcibios_penalize_isa_irq(int irq) +{ + + /* We don't do dynamic PCI IRQ allocation */ +} +static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* return virt_to_bus(ptr); */ + return (dma_addr_t) ptr; +} + +/* Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + return nents; +} + +/* Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, the + * device again owns the buffer. + */ +static inline void pci_dma_sync_single(struct pci_dev *hwdev, + dma_addr_t dma_handle, size_t size, + int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, + * same rules and usage. + */ +static inline void pci_dma_sync_sg(struct pci_dev *hwdev, + struct scatterlist *sg, int nelems, + int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +#endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h new file mode 100644 index 00000000000..78dd61f6b39 --- /dev/null +++ b/arch/blackfin/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_BLACKFIN_PERCPU__ +#define __ARCH_BLACKFIN_PERCPU__ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h new file mode 100644 index 00000000000..c686e0542fd --- /dev/null +++ b/arch/blackfin/include/asm/pgalloc.h @@ -0,0 +1,8 @@ +#ifndef _BLACKFIN_PGALLOC_H +#define _BLACKFIN_PGALLOC_H + +#include <asm/setup.h> + +#define check_pgt_cache() do { } while (0) + +#endif /* _BLACKFIN_PGALLOC_H */ diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h new file mode 100644 index 00000000000..f11684e4ade --- /dev/null +++ b/arch/blackfin/include/asm/pgtable.h @@ -0,0 +1,96 @@ +#ifndef _BLACKFIN_PGTABLE_H +#define _BLACKFIN_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +#include <asm/page.h> +#include <asm/def_LPBlackfin.h> + +typedef pte_t *pte_addr_t; +/* +* Trivial page table functions. +*/ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) + +#define pmd_offset(a, b) ((void *)0) +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define kern_addr_valid(addr) (1) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ + +extern void paging_init(void); + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) +{ + return 0; +} + +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +/* + * Page assess control based on Blackfin CPLB management + */ +#define _PAGE_RD (CPLB_USER_RD) +#define _PAGE_WR (CPLB_USER_WR) +#define _PAGE_USER (CPLB_USER_RD | CPLB_USER_WR) +#define _PAGE_ACCESSED CPLB_ALL_ACCESS +#define _PAGE_DIRTY (CPLB_DIRTY) + +#define PTE_BIT_FUNC(fn, op) \ + static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; } + +PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD); +PTE_BIT_FUNC(mkread, |= _PAGE_RD); +PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR); +PTE_BIT_FUNC(mkwrite, |= _PAGE_WR); +PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER); +PTE_BIT_FUNC(mkexec, |= _PAGE_USER); +PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED); + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +extern unsigned int kobjsize(const void *objp); + +#define swapper_pg_dir ((pgd_t *) 0) +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) +#define io_remap_pfn_range remap_pfn_range + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#include <asm-generic/pgtable.h> + +#endif /* _BLACKFIN_PGTABLE_H */ diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h new file mode 100644 index 00000000000..94cc2636e0e --- /dev/null +++ b/arch/blackfin/include/asm/poll.h @@ -0,0 +1,24 @@ +#ifndef __BFIN_POLL_H +#define __BFIN_POLL_H + +#define POLLIN 1 +#define POLLPRI 2 +#define POLLOUT 4 +#define POLLERR 8 +#define POLLHUP 16 +#define POLLNVAL 32 +#define POLLRDNORM 64 +#define POLLWRNORM POLLOUT +#define POLLRDBAND 128 +#define POLLWRBAND 256 +#define POLLMSG 0x0400 +#define POLLREMOVE 0x1000 +#define POLLRDHUP 0x2000 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif /* __BFIN_POLL_H */ diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h new file mode 100644 index 00000000000..88eb5c07cc2 --- /dev/null +++ b/arch/blackfin/include/asm/portmux.h @@ -0,0 +1,1188 @@ +/* + * Common header file for blackfin family of processors. + * + */ + +#ifndef _PORTMUX_H_ +#define _PORTMUX_H_ + +#define P_IDENT(x) ((x) & 0x1FF) +#define P_FUNCT(x) (((x) & 0x3) << 9) +#define P_FUNCT2MUX(x) (((x) >> 9) & 0x3) +#define P_DEFINED 0x8000 +#define P_UNDEF 0x4000 +#define P_MAYSHARE 0x2000 +#define P_DONTCARE 0x1000 + + +int peripheral_request(unsigned short per, const char *label); +void peripheral_free(unsigned short per); +int peripheral_request_list(const unsigned short per[], const char *label); +void peripheral_free_list(const unsigned short per[]); + +#include <asm/gpio.h> +#include <mach/portmux.h> + +#ifndef P_SPORT2_TFS +#define P_SPORT2_TFS P_UNDEF +#endif + +#ifndef P_SPORT2_DTSEC +#define P_SPORT2_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT2_DTPRI +#define P_SPORT2_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT2_TSCLK +#define P_SPORT2_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT2_RFS +#define P_SPORT2_RFS P_UNDEF +#endif + +#ifndef P_SPORT2_DRSEC +#define P_SPORT2_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT2_DRPRI +#define P_SPORT2_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT2_RSCLK +#define P_SPORT2_RSCLK P_UNDEF +#endif + +#ifndef P_SPORT3_TFS +#define P_SPORT3_TFS P_UNDEF +#endif + +#ifndef P_SPORT3_DTSEC +#define P_SPORT3_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT3_DTPRI +#define P_SPORT3_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT3_TSCLK +#define P_SPORT3_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT3_RFS +#define P_SPORT3_RFS P_UNDEF +#endif + +#ifndef P_SPORT3_DRSEC +#define P_SPORT3_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT3_DRPRI +#define P_SPORT3_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT3_RSCLK +#define P_SPORT3_RSCLK P_UNDEF +#endif + +#ifndef P_TMR4 +#define P_TMR4 P_UNDEF +#endif + +#ifndef P_TMR5 +#define P_TMR5 P_UNDEF +#endif + +#ifndef P_TMR6 +#define P_TMR6 P_UNDEF +#endif + +#ifndef P_TMR7 +#define P_TMR7 P_UNDEF +#endif + +#ifndef P_TWI1_SCL +#define P_TWI1_SCL P_UNDEF +#endif + +#ifndef P_TWI1_SDA +#define P_TWI1_SDA P_UNDEF +#endif + +#ifndef P_UART3_RTS +#define P_UART3_RTS P_UNDEF +#endif + +#ifndef P_UART3_CTS +#define P_UART3_CTS P_UNDEF +#endif + +#ifndef P_UART2_TX +#define P_UART2_TX P_UNDEF +#endif + +#ifndef P_UART2_RX +#define P_UART2_RX P_UNDEF +#endif + +#ifndef P_UART3_TX +#define P_UART3_TX P_UNDEF +#endif + +#ifndef P_UART3_RX +#define P_UART3_RX P_UNDEF +#endif + +#ifndef P_SPI2_SS +#define P_SPI2_SS P_UNDEF +#endif + +#ifndef P_SPI2_SSEL1 +#define P_SPI2_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL2 +#define P_SPI2_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL3 +#define P_SPI2_SSEL3 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL4 +#define P_SPI2_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL5 +#define P_SPI2_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL6 +#define P_SPI2_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL7 +#define P_SPI2_SSEL7 P_UNDEF +#endif + +#ifndef P_SPI2_SCK +#define P_SPI2_SCK P_UNDEF +#endif + +#ifndef P_SPI2_MOSI +#define P_SPI2_MOSI P_UNDEF +#endif + +#ifndef P_SPI2_MISO +#define P_SPI2_MISO P_UNDEF +#endif + +#ifndef P_TMR0 +#define P_TMR0 P_UNDEF +#endif + +#ifndef P_TMR1 +#define P_TMR1 P_UNDEF +#endif + +#ifndef P_TMR2 +#define P_TMR2 P_UNDEF +#endif + +#ifndef P_TMR3 +#define P_TMR3 P_UNDEF +#endif + +#ifndef P_SPORT0_TFS +#define P_SPORT0_TFS P_UNDEF +#endif + +#ifndef P_SPORT0_DTSEC +#define P_SPORT0_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT0_DTPRI +#define P_SPORT0_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT0_TSCLK +#define P_SPORT0_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT0_RFS +#define P_SPORT0_RFS P_UNDEF +#endif + +#ifndef P_SPORT0_DRSEC +#define P_SPORT0_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT0_DRPRI +#define P_SPORT0_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT0_RSCLK +#define P_SPORT0_RSCLK P_UNDEF +#endif + +#ifndef P_SD_D0 +#define P_SD_D0 P_UNDEF +#endif + +#ifndef P_SD_D1 +#define P_SD_D1 P_UNDEF +#endif + +#ifndef P_SD_D2 +#define P_SD_D2 P_UNDEF +#endif + +#ifndef P_SD_D3 +#define P_SD_D3 P_UNDEF +#endif + +#ifndef P_SD_CLK +#define P_SD_CLK P_UNDEF +#endif + +#ifndef P_SD_CMD +#define P_SD_CMD P_UNDEF +#endif + +#ifndef P_MMCLK +#define P_MMCLK P_UNDEF +#endif + +#ifndef P_MBCLK +#define P_MBCLK P_UNDEF +#endif + +#ifndef P_PPI1_D0 +#define P_PPI1_D0 P_UNDEF +#endif + +#ifndef P_PPI1_D1 +#define P_PPI1_D1 P_UNDEF +#endif + +#ifndef P_PPI1_D2 +#define P_PPI1_D2 P_UNDEF +#endif + +#ifndef P_PPI1_D3 +#define P_PPI1_D3 P_UNDEF +#endif + +#ifndef P_PPI1_D4 +#define P_PPI1_D4 P_UNDEF +#endif + +#ifndef P_PPI1_D5 +#define P_PPI1_D5 P_UNDEF +#endif + +#ifndef P_PPI1_D6 +#define P_PPI1_D6 P_UNDEF +#endif + +#ifndef P_PPI1_D7 +#define P_PPI1_D7 P_UNDEF +#endif + +#ifndef P_PPI1_D8 +#define P_PPI1_D8 P_UNDEF +#endif + +#ifndef P_PPI1_D9 +#define P_PPI1_D9 P_UNDEF +#endif + +#ifndef P_PPI1_D10 +#define P_PPI1_D10 P_UNDEF +#endif + +#ifndef P_PPI1_D11 +#define P_PPI1_D11 P_UNDEF +#endif + +#ifndef P_PPI1_D12 +#define P_PPI1_D12 P_UNDEF +#endif + +#ifndef P_PPI1_D13 +#define P_PPI1_D13 P_UNDEF +#endif + +#ifndef P_PPI1_D14 +#define P_PPI1_D14 P_UNDEF +#endif + +#ifndef P_PPI1_D15 +#define P_PPI1_D15 P_UNDEF +#endif + +#ifndef P_HOST_D8 +#define P_HOST_D8 P_UNDEF +#endif + +#ifndef P_HOST_D9 +#define P_HOST_D9 P_UNDEF +#endif + +#ifndef P_HOST_D10 +#define P_HOST_D10 P_UNDEF +#endif + +#ifndef P_HOST_D11 +#define P_HOST_D11 P_UNDEF +#endif + +#ifndef P_HOST_D12 +#define P_HOST_D12 P_UNDEF +#endif + +#ifndef P_HOST_D13 +#define P_HOST_D13 P_UNDEF +#endif + +#ifndef P_HOST_D14 +#define P_HOST_D14 P_UNDEF +#endif + +#ifndef P_HOST_D15 +#define P_HOST_D15 P_UNDEF +#endif + +#ifndef P_HOST_D0 +#define P_HOST_D0 P_UNDEF +#endif + +#ifndef P_HOST_D1 +#define P_HOST_D1 P_UNDEF +#endif + +#ifndef P_HOST_D2 +#define P_HOST_D2 P_UNDEF +#endif + +#ifndef P_HOST_D3 +#define P_HOST_D3 P_UNDEF +#endif + +#ifndef P_HOST_D4 +#define P_HOST_D4 P_UNDEF +#endif + +#ifndef P_HOST_D5 +#define P_HOST_D5 P_UNDEF +#endif + +#ifndef P_HOST_D6 +#define P_HOST_D6 P_UNDEF +#endif + +#ifndef P_HOST_D7 +#define P_HOST_D7 P_UNDEF +#endif + +#ifndef P_SPORT1_TFS +#define P_SPORT1_TFS P_UNDEF +#endif + +#ifndef P_SPORT1_DTSEC +#define P_SPORT1_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT1_DTPRI +#define P_SPORT1_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT1_TSCLK +#define P_SPORT1_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT1_RFS +#define P_SPORT1_RFS P_UNDEF +#endif + +#ifndef P_SPORT1_DRSEC +#define P_SPORT1_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT1_DRPRI +#define P_SPORT1_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT1_RSCLK +#define P_SPORT1_RSCLK P_UNDEF +#endif + +#ifndef P_PPI2_D0 +#define P_PPI2_D0 P_UNDEF +#endif + +#ifndef P_PPI2_D1 +#define P_PPI2_D1 P_UNDEF +#endif + +#ifndef P_PPI2_D2 +#define P_PPI2_D2 P_UNDEF +#endif + +#ifndef P_PPI2_D3 +#define P_PPI2_D3 P_UNDEF +#endif + +#ifndef P_PPI2_D4 +#define P_PPI2_D4 P_UNDEF +#endif + +#ifndef P_PPI2_D5 +#define P_PPI2_D5 P_UNDEF +#endif + +#ifndef P_PPI2_D6 +#define P_PPI2_D6 P_UNDEF +#endif + +#ifndef P_PPI2_D7 +#define P_PPI2_D7 P_UNDEF +#endif + +#ifndef P_PPI0_D18 +#define P_PPI0_D18 P_UNDEF +#endif + +#ifndef P_PPI0_D19 +#define P_PPI0_D19 P_UNDEF +#endif + +#ifndef P_PPI0_D20 +#define P_PPI0_D20 P_UNDEF +#endif + +#ifndef P_PPI0_D21 +#define P_PPI0_D21 P_UNDEF +#endif + +#ifndef P_PPI0_D22 +#define P_PPI0_D22 P_UNDEF +#endif + +#ifndef P_PPI0_D23 +#define P_PPI0_D23 P_UNDEF +#endif + +#ifndef P_KEY_ROW0 +#define P_KEY_ROW0 P_UNDEF +#endif + +#ifndef P_KEY_ROW1 +#define P_KEY_ROW1 P_UNDEF +#endif + +#ifndef P_KEY_ROW2 +#define P_KEY_ROW2 P_UNDEF +#endif + +#ifndef P_KEY_ROW3 +#define P_KEY_ROW3 P_UNDEF +#endif + +#ifndef P_KEY_COL0 +#define P_KEY_COL0 P_UNDEF +#endif + +#ifndef P_KEY_COL1 +#define P_KEY_COL1 P_UNDEF +#endif + +#ifndef P_KEY_COL2 +#define P_KEY_COL2 P_UNDEF +#endif + +#ifndef P_KEY_COL3 +#define P_KEY_COL3 P_UNDEF +#endif + +#ifndef P_SPI0_SCK +#define P_SPI0_SCK P_UNDEF +#endif + +#ifndef P_SPI0_MISO +#define P_SPI0_MISO P_UNDEF +#endif + +#ifndef P_SPI0_MOSI +#define P_SPI0_MOSI P_UNDEF +#endif + +#ifndef P_SPI0_SS +#define P_SPI0_SS P_UNDEF +#endif + +#ifndef P_SPI0_SSEL1 +#define P_SPI0_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL2 +#define P_SPI0_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL3 +#define P_SPI0_SSEL3 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL4 +#define P_SPI0_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL5 +#define P_SPI0_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL6 +#define P_SPI0_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL7 +#define P_SPI0_SSEL7 P_UNDEF +#endif + +#ifndef P_UART0_TX +#define P_UART0_TX P_UNDEF +#endif + +#ifndef P_UART0_RX +#define P_UART0_RX P_UNDEF +#endif + +#ifndef P_UART1_RTS +#define P_UART1_RTS P_UNDEF +#endif + +#ifndef P_UART1_CTS +#define P_UART1_CTS P_UNDEF +#endif + +#ifndef P_PPI1_CLK +#define P_PPI1_CLK P_UNDEF +#endif + +#ifndef P_PPI1_FS1 +#define P_PPI1_FS1 P_UNDEF +#endif + +#ifndef P_PPI1_FS2 +#define P_PPI1_FS2 P_UNDEF +#endif + +#ifndef P_TWI0_SCL +#define P_TWI0_SCL P_UNDEF +#endif + +#ifndef P_TWI0_SDA +#define P_TWI0_SDA P_UNDEF +#endif + +#ifndef P_KEY_COL7 +#define P_KEY_COL7 P_UNDEF +#endif + +#ifndef P_KEY_ROW6 +#define P_KEY_ROW6 P_UNDEF +#endif + +#ifndef P_KEY_COL6 +#define P_KEY_COL6 P_UNDEF +#endif + +#ifndef P_KEY_ROW5 +#define P_KEY_ROW5 P_UNDEF +#endif + +#ifndef P_KEY_COL5 +#define P_KEY_COL5 P_UNDEF +#endif + +#ifndef P_KEY_ROW4 +#define P_KEY_ROW4 P_UNDEF +#endif + +#ifndef P_KEY_COL4 +#define P_KEY_COL4 P_UNDEF +#endif + +#ifndef P_KEY_ROW7 +#define P_KEY_ROW7 P_UNDEF +#endif + +#ifndef P_PPI0_D0 +#define P_PPI0_D0 P_UNDEF +#endif + +#ifndef P_PPI0_D1 +#define P_PPI0_D1 P_UNDEF +#endif + +#ifndef P_PPI0_D2 +#define P_PPI0_D2 P_UNDEF +#endif + +#ifndef P_PPI0_D3 +#define P_PPI0_D3 P_UNDEF +#endif + +#ifndef P_PPI0_D4 +#define P_PPI0_D4 P_UNDEF +#endif + +#ifndef P_PPI0_D5 +#define P_PPI0_D5 P_UNDEF +#endif + +#ifndef P_PPI0_D6 +#define P_PPI0_D6 P_UNDEF +#endif + +#ifndef P_PPI0_D7 +#define P_PPI0_D7 P_UNDEF +#endif + +#ifndef P_PPI0_D8 +#define P_PPI0_D8 P_UNDEF +#endif + +#ifndef P_PPI0_D9 +#define P_PPI0_D9 P_UNDEF +#endif + +#ifndef P_PPI0_D10 +#define P_PPI0_D10 P_UNDEF +#endif + +#ifndef P_PPI0_D11 +#define P_PPI0_D11 P_UNDEF +#endif + +#ifndef P_PPI0_D12 +#define P_PPI0_D12 P_UNDEF +#endif + +#ifndef P_PPI0_D13 +#define P_PPI0_D13 P_UNDEF +#endif + +#ifndef P_PPI0_D14 +#define P_PPI0_D14 P_UNDEF +#endif + +#ifndef P_PPI0_D15 +#define P_PPI0_D15 P_UNDEF +#endif + +#ifndef P_ATAPI_D0A +#define P_ATAPI_D0A P_UNDEF +#endif + +#ifndef P_ATAPI_D1A +#define P_ATAPI_D1A P_UNDEF +#endif + +#ifndef P_ATAPI_D2A +#define P_ATAPI_D2A P_UNDEF +#endif + +#ifndef P_ATAPI_D3A +#define P_ATAPI_D3A P_UNDEF +#endif + +#ifndef P_ATAPI_D4A +#define P_ATAPI_D4A P_UNDEF +#endif + +#ifndef P_ATAPI_D5A +#define P_ATAPI_D5A P_UNDEF +#endif + +#ifndef P_ATAPI_D6A +#define P_ATAPI_D6A P_UNDEF +#endif + +#ifndef P_ATAPI_D7A +#define P_ATAPI_D7A P_UNDEF +#endif + +#ifndef P_ATAPI_D8A +#define P_ATAPI_D8A P_UNDEF +#endif + +#ifndef P_ATAPI_D9A +#define P_ATAPI_D9A P_UNDEF +#endif + +#ifndef P_ATAPI_D10A +#define P_ATAPI_D10A P_UNDEF +#endif + +#ifndef P_ATAPI_D11A +#define P_ATAPI_D11A P_UNDEF +#endif + +#ifndef P_ATAPI_D12A +#define P_ATAPI_D12A P_UNDEF +#endif + +#ifndef P_ATAPI_D13A +#define P_ATAPI_D13A P_UNDEF +#endif + +#ifndef P_ATAPI_D14A +#define P_ATAPI_D14A P_UNDEF +#endif + +#ifndef P_ATAPI_D15A +#define P_ATAPI_D15A P_UNDEF +#endif + +#ifndef P_PPI0_CLK +#define P_PPI0_CLK P_UNDEF +#endif + +#ifndef P_PPI0_FS1 +#define P_PPI0_FS1 P_UNDEF +#endif + +#ifndef P_PPI0_FS2 +#define P_PPI0_FS2 P_UNDEF +#endif + +#ifndef P_PPI0_D16 +#define P_PPI0_D16 P_UNDEF +#endif + +#ifndef P_PPI0_D17 +#define P_PPI0_D17 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL1 +#define P_SPI1_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL2 +#define P_SPI1_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL3 +#define P_SPI1_SSEL3 P_UNDEF +#endif + + +#ifndef P_SPI1_SSEL4 +#define P_SPI1_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL5 +#define P_SPI1_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL6 +#define P_SPI1_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL7 +#define P_SPI1_SSEL7 P_UNDEF +#endif + +#ifndef P_SPI1_SCK +#define P_SPI1_SCK P_UNDEF +#endif + +#ifndef P_SPI1_MISO +#define P_SPI1_MISO P_UNDEF +#endif + +#ifndef P_SPI1_MOSI +#define P_SPI1_MOSI P_UNDEF +#endif + +#ifndef P_SPI1_SS +#define P_SPI1_SS P_UNDEF +#endif + +#ifndef P_CAN0_TX +#define P_CAN0_TX P_UNDEF +#endif + +#ifndef P_CAN0_RX +#define P_CAN0_RX P_UNDEF +#endif + +#ifndef P_CAN1_TX +#define P_CAN1_TX P_UNDEF +#endif + +#ifndef P_CAN1_RX +#define P_CAN1_RX P_UNDEF +#endif + +#ifndef P_ATAPI_A0A +#define P_ATAPI_A0A P_UNDEF +#endif + +#ifndef P_ATAPI_A1A +#define P_ATAPI_A1A P_UNDEF +#endif + +#ifndef P_ATAPI_A2A +#define P_ATAPI_A2A P_UNDEF +#endif + +#ifndef P_HOST_CE +#define P_HOST_CE P_UNDEF +#endif + +#ifndef P_HOST_RD +#define P_HOST_RD P_UNDEF +#endif + +#ifndef P_HOST_WR +#define P_HOST_WR P_UNDEF +#endif + +#ifndef P_MTXONB +#define P_MTXONB P_UNDEF +#endif + +#ifndef P_PPI2_FS2 +#define P_PPI2_FS2 P_UNDEF +#endif + +#ifndef P_PPI2_FS1 +#define P_PPI2_FS1 P_UNDEF +#endif + +#ifndef P_PPI2_CLK +#define P_PPI2_CLK P_UNDEF +#endif + +#ifndef P_CNT_CZM +#define P_CNT_CZM P_UNDEF +#endif + +#ifndef P_UART1_TX +#define P_UART1_TX P_UNDEF +#endif + +#ifndef P_UART1_RX +#define P_UART1_RX P_UNDEF +#endif + +#ifndef P_ATAPI_RESET +#define P_ATAPI_RESET P_UNDEF +#endif + +#ifndef P_HOST_ADDR +#define P_HOST_ADDR P_UNDEF +#endif + +#ifndef P_HOST_ACK +#define P_HOST_ACK P_UNDEF +#endif + +#ifndef P_MTX +#define P_MTX P_UNDEF +#endif + +#ifndef P_MRX +#define P_MRX P_UNDEF +#endif + +#ifndef P_MRXONB +#define P_MRXONB P_UNDEF +#endif + +#ifndef P_A4 +#define P_A4 P_UNDEF +#endif + +#ifndef P_A5 +#define P_A5 P_UNDEF +#endif + +#ifndef P_A6 +#define P_A6 P_UNDEF +#endif + +#ifndef P_A7 +#define P_A7 P_UNDEF +#endif + +#ifndef P_A8 +#define P_A8 P_UNDEF +#endif + +#ifndef P_A9 +#define P_A9 P_UNDEF +#endif + +#ifndef P_PPI1_FS3 +#define P_PPI1_FS3 P_UNDEF +#endif + +#ifndef P_PPI2_FS3 +#define P_PPI2_FS3 P_UNDEF +#endif + +#ifndef P_TMR8 +#define P_TMR8 P_UNDEF +#endif + +#ifndef P_TMR9 +#define P_TMR9 P_UNDEF +#endif + +#ifndef P_TMR10 +#define P_TMR10 P_UNDEF +#endif +#ifndef P_TMR11 +#define P_TMR11 P_UNDEF +#endif + +#ifndef P_DMAR0 +#define P_DMAR0 P_UNDEF +#endif + +#ifndef P_DMAR1 +#define P_DMAR1 P_UNDEF +#endif + +#ifndef P_PPI0_FS3 +#define P_PPI0_FS3 P_UNDEF +#endif + +#ifndef P_CNT_CDG +#define P_CNT_CDG P_UNDEF +#endif + +#ifndef P_CNT_CUD +#define P_CNT_CUD P_UNDEF +#endif + +#ifndef P_A10 +#define P_A10 P_UNDEF +#endif + +#ifndef P_A11 +#define P_A11 P_UNDEF +#endif + +#ifndef P_A12 +#define P_A12 P_UNDEF +#endif + +#ifndef P_A13 +#define P_A13 P_UNDEF +#endif + +#ifndef P_A14 +#define P_A14 P_UNDEF +#endif + +#ifndef P_A15 +#define P_A15 P_UNDEF +#endif + +#ifndef P_A16 +#define P_A16 P_UNDEF +#endif + +#ifndef P_A17 +#define P_A17 P_UNDEF +#endif + +#ifndef P_A18 +#define P_A18 P_UNDEF +#endif + +#ifndef P_A19 +#define P_A19 P_UNDEF +#endif + +#ifndef P_A20 +#define P_A20 P_UNDEF +#endif + +#ifndef P_A21 +#define P_A21 P_UNDEF +#endif + +#ifndef P_A22 +#define P_A22 P_UNDEF +#endif + +#ifndef P_A23 +#define P_A23 P_UNDEF +#endif + +#ifndef P_A24 +#define P_A24 P_UNDEF +#endif + +#ifndef P_A25 +#define P_A25 P_UNDEF +#endif + +#ifndef P_NOR_CLK +#define P_NOR_CLK P_UNDEF +#endif + +#ifndef P_TMRCLK +#define P_TMRCLK P_UNDEF +#endif + +#ifndef P_AMC_ARDY_NOR_WAIT +#define P_AMC_ARDY_NOR_WAIT P_UNDEF +#endif + +#ifndef P_NAND_CE +#define P_NAND_CE P_UNDEF +#endif + +#ifndef P_NAND_RB +#define P_NAND_RB P_UNDEF +#endif + +#ifndef P_ATAPI_DIOR +#define P_ATAPI_DIOR P_UNDEF +#endif + +#ifndef P_ATAPI_DIOW +#define P_ATAPI_DIOW P_UNDEF +#endif + +#ifndef P_ATAPI_CS0 +#define P_ATAPI_CS0 P_UNDEF +#endif + +#ifndef P_ATAPI_CS1 +#define P_ATAPI_CS1 P_UNDEF +#endif + +#ifndef P_ATAPI_DMACK +#define P_ATAPI_DMACK P_UNDEF +#endif + +#ifndef P_ATAPI_DMARQ +#define P_ATAPI_DMARQ P_UNDEF +#endif + +#ifndef P_ATAPI_INTRQ +#define P_ATAPI_INTRQ P_UNDEF +#endif + +#ifndef P_ATAPI_IORDY +#define P_ATAPI_IORDY P_UNDEF +#endif + +#ifndef P_AMC_BR +#define P_AMC_BR P_UNDEF +#endif + +#ifndef P_AMC_BG +#define P_AMC_BG P_UNDEF +#endif + +#ifndef P_AMC_BGH +#define P_AMC_BGH P_UNDEF +#endif + +/* EMAC */ + +#ifndef P_MII0_ETxD0 +#define P_MII0_ETxD0 P_UNDEF +#endif + +#ifndef P_MII0_ETxD1 +#define P_MII0_ETxD1 P_UNDEF +#endif + +#ifndef P_MII0_ETxD2 +#define P_MII0_ETxD2 P_UNDEF +#endif + +#ifndef P_MII0_ETxD3 +#define P_MII0_ETxD3 P_UNDEF +#endif + +#ifndef P_MII0_ETxEN +#define P_MII0_ETxEN P_UNDEF +#endif + +#ifndef P_MII0_TxCLK +#define P_MII0_TxCLK P_UNDEF +#endif + +#ifndef P_MII0_PHYINT +#define P_MII0_PHYINT P_UNDEF +#endif + +#ifndef P_MII0_COL +#define P_MII0_COL P_UNDEF +#endif + +#ifndef P_MII0_ERxD0 +#define P_MII0_ERxD0 P_UNDEF +#endif + +#ifndef P_MII0_ERxD1 +#define P_MII0_ERxD1 P_UNDEF +#endif + +#ifndef P_MII0_ERxD2 +#define P_MII0_ERxD2 P_UNDEF +#endif + +#ifndef P_MII0_ERxD3 +#define P_MII0_ERxD3 P_UNDEF +#endif + +#ifndef P_MII0_ERxDV +#define P_MII0_ERxDV P_UNDEF +#endif + +#ifndef P_MII0_ERxCLK +#define P_MII0_ERxCLK P_UNDEF +#endif + +#ifndef P_MII0_ERxER +#define P_MII0_ERxER P_UNDEF +#endif + +#ifndef P_MII0_CRS +#define P_MII0_CRS P_UNDEF +#endif + +#ifndef P_RMII0_REF_CLK +#define P_RMII0_REF_CLK P_UNDEF +#endif + +#ifndef P_RMII0_MDINT +#define P_RMII0_MDINT P_UNDEF +#endif + +#ifndef P_RMII0_CRS_DV +#define P_RMII0_CRS_DV P_UNDEF +#endif + +#ifndef P_MDC +#define P_MDC P_UNDEF +#endif + +#ifndef P_MDIO +#define P_MDIO P_UNDEF +#endif + +#endif /* _PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h new file mode 100644 index 00000000000..23aa1f8c1bd --- /dev/null +++ b/arch/blackfin/include/asm/posix_types.h @@ -0,0 +1,61 @@ +#ifndef __ARCH_BFIN_POSIX_TYPES_H +#define __ARCH_BFIN_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) */ + +#endif diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h new file mode 100644 index 00000000000..6f3995b119d --- /dev/null +++ b/arch/blackfin/include/asm/processor.h @@ -0,0 +1,158 @@ +#ifndef __ASM_BFIN_PROCESSOR_H +#define __ASM_BFIN_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <asm/blackfin.h> +#include <asm/segment.h> +#include <linux/compiler.h> + +static inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__("%0 = usp;\n\t":"=da"(usp)); + return usp; +} + +static inline void wrusp(unsigned long usp) +{ + __asm__ __volatile__("usp = %0;\n\t"::"da"(usp)); +} + +/* + * User space process size: 1st byte beyond user address space. + * Fairly meaningless on nommu. Parts of user programs can be scattered + * in a lot of places, so just disable this by setting it to 0xFFFFFFFF. + */ +#define TASK_SIZE 0xFFFFFFFF + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#endif + +#define TASK_UNMAPPED_BASE 0 + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short seqstat; /* saved status register */ + unsigned long esp0; /* points to SR of stack frame pt_regs */ + unsigned long pc; /* instruction pointer */ + void * debuggerinfo; +}; + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, 0, 0 \ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); \ + (_regs)->pc = (_pc); \ + if (current->mm) \ + (_regs)->p5 = current->mm->start_data; \ + task_thread_info(current)->l1_task_info.stack_start \ + = (void *)current->mm->context.stack_start; \ + task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \ + memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \ + sizeof(*L1_SCRATCH_TASK_INFO)); \ + wrusp(_usp); \ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + MAP_NR((tsk)->thread.esp0) < max_mapnr) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +/* Get the Silicon Revision of the chip */ +static inline uint32_t __pure bfin_revid(void) +{ + /* stored in the upper 4 bits */ + uint32_t revid = bfin_read_CHIPID() >> 28; + +#ifdef CONFIG_BF52x + /* ANOMALY_05000357 + * Incorrect Revision Number in DSPID Register + */ + if (revid == 0) + switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) { + case 0x0010: + revid = 0; + break; + case 0x2796: + revid = 1; + break; + default: + revid = 0xFFFF; + break; + } +#endif + return revid; +} + +static inline uint32_t __pure bfin_compiled_revid(void) +{ +#if defined(CONFIG_BF_REV_0_0) + return 0; +#elif defined(CONFIG_BF_REV_0_1) + return 1; +#elif defined(CONFIG_BF_REV_0_2) + return 2; +#elif defined(CONFIG_BF_REV_0_3) + return 3; +#elif defined(CONFIG_BF_REV_0_4) + return 4; +#elif defined(CONFIG_BF_REV_0_5) + return 5; +#elif defined(CONFIG_BF_REV_ANY) + return 0xffff; +#else + return -1; +#endif +} + +#endif diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h new file mode 100644 index 00000000000..a45a80e54ad --- /dev/null +++ b/arch/blackfin/include/asm/ptrace.h @@ -0,0 +1,168 @@ +#ifndef _BFIN_PTRACE_H +#define _BFIN_PTRACE_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * ----------------------------- + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long orig_pc; + long ipend; + long seqstat; + long rete; + long retn; + long retx; + long pc; /* PC == RETI */ + long rets; + long reserved; /* Used as scratch during system calls */ + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; + long orig_p0; + long syscfg; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#define PTRACE_GETFDPIC 31 +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 + +#define PS_S (0x0002) + +#ifdef __KERNEL__ + +/* user_mode returns true if only one bit is set in IPEND, other than the + master interrupt enable. */ +#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets used by 'ptrace' system call interface. + */ + +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_FP 148 +#define PT_USP 144 +#define PT_I0 140 +#define PT_I1 136 +#define PT_I2 132 +#define PT_I3 128 +#define PT_M0 124 +#define PT_M1 120 +#define PT_M2 116 +#define PT_M3 112 +#define PT_L0 108 +#define PT_L1 104 +#define PT_L2 100 +#define PT_L3 96 +#define PT_B0 92 +#define PT_B1 88 +#define PT_B2 84 +#define PT_B3 80 +#define PT_A0X 76 +#define PT_A0W 72 +#define PT_A1X 68 +#define PT_A1W 64 +#define PT_LC0 60 +#define PT_LC1 56 +#define PT_LT0 52 +#define PT_LT1 48 +#define PT_LB0 44 +#define PT_LB1 40 +#define PT_ASTAT 36 +#define PT_RESERVED 32 +#define PT_RETS 28 +#define PT_PC 24 +#define PT_RETX 20 +#define PT_RETN 16 +#define PT_RETE 12 +#define PT_SEQSTAT 8 +#define PT_IPEND 4 + +#define PT_SYSCFG 216 +#define PT_TEXT_ADDR 220 +#define PT_TEXT_END_ADDR 224 +#define PT_DATA_ADDR 228 +#define PT_FDPIC_EXEC 232 +#define PT_FDPIC_INTERP 236 + +#endif /* _BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h new file mode 100644 index 00000000000..6d448b5f598 --- /dev/null +++ b/arch/blackfin/include/asm/reboot.h @@ -0,0 +1,20 @@ +/* + * include/asm-blackfin/reboot.h - shutdown/reboot header + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_REBOOT_H__ +#define __ASM_REBOOT_H__ + +/* optional board specific hooks */ +extern void native_machine_restart(char *cmd); +extern void native_machine_halt(void); +extern void native_machine_power_off(void); + +/* common reboot workarounds */ +extern void bfin_gpio_reset_spi0_ssel1(void); + +#endif diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h new file mode 100644 index 00000000000..091355ab349 --- /dev/null +++ b/arch/blackfin/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_RESOURCE_H +#define _BFIN_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* _BFIN_RESOURCE_H */ diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h new file mode 100644 index 00000000000..04f448711cd --- /dev/null +++ b/arch/blackfin/include/asm/scatterlist.h @@ -0,0 +1,28 @@ +#ifndef _BLACKFIN_SCATTERLIST_H +#define _BLACKFIN_SCATTERLIST_H + +#include <linux/mm.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* !(_BLACKFIN_SCATTERLIST_H) */ diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h new file mode 100644 index 00000000000..1443c3353a8 --- /dev/null +++ b/arch/blackfin/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _BLACKFIN_SECTIONS_H +#define _BLACKFIN_SECTIONS_H + +/* nothing to see, move along */ +#include <asm-generic/sections.h> + +#endif diff --git a/arch/blackfin/include/asm/segment.h b/arch/blackfin/include/asm/segment.h new file mode 100644 index 00000000000..02cfd09b5a9 --- /dev/null +++ b/arch/blackfin/include/asm/segment.h @@ -0,0 +1,7 @@ +#ifndef _BFIN_SEGMENT_H +#define _BFIN_SEGMENT_H + +#define KERNEL_DS (0x5) +#define USER_DS (0x1) + +#endif /* _BFIN_SEGMENT_H */ diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h new file mode 100644 index 00000000000..18deb5c7fa5 --- /dev/null +++ b/arch/blackfin/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _BFIN_SEMBUF_H +#define _BFIN_SEMBUF_H + +/* + * The semid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _BFIN_SEMBUF_H */ diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h new file mode 100644 index 00000000000..994dd869558 --- /dev/null +++ b/arch/blackfin/include/asm/serial.h @@ -0,0 +1,5 @@ +/* + * include/asm-blackfin/serial.h + */ + +#define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h new file mode 100644 index 00000000000..01c8c6cbe6f --- /dev/null +++ b/arch/blackfin/include/asm/setup.h @@ -0,0 +1,17 @@ +/* +** asm/setup.h -- Definition of the Linux/bfin setup information +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Copyright Lineo, Inc 2001 Tony Kou +** +*/ + +#ifndef _BFIN_SETUP_H +#define _BFIN_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif /* _BFIN_SETUP_H */ diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h new file mode 100644 index 00000000000..612436303e8 --- /dev/null +++ b/arch/blackfin/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _BFIN_SHMBUF_H +#define _BFIN_SHMBUF_H + +/* + * The shmid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _BFIN_SHMBUF_H */ diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h new file mode 100644 index 00000000000..3c03906b766 --- /dev/null +++ b/arch/blackfin/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_SHMPARAM_H +#define _BFIN_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _BFIN_SHMPARAM_H */ diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h new file mode 100644 index 00000000000..ce00b03c277 --- /dev/null +++ b/arch/blackfin/include/asm/sigcontext.h @@ -0,0 +1,55 @@ +#ifndef _ASM_BLACKFIN_SIGCONTEXT_H +#define _ASM_BLACKFIN_SIGCONTEXT_H + +/* Add new entries at the end of the structure only. */ +struct sigcontext { + unsigned long sc_r0; + unsigned long sc_r1; + unsigned long sc_r2; + unsigned long sc_r3; + unsigned long sc_r4; + unsigned long sc_r5; + unsigned long sc_r6; + unsigned long sc_r7; + unsigned long sc_p0; + unsigned long sc_p1; + unsigned long sc_p2; + unsigned long sc_p3; + unsigned long sc_p4; + unsigned long sc_p5; + unsigned long sc_usp; + unsigned long sc_a0w; + unsigned long sc_a1w; + unsigned long sc_a0x; + unsigned long sc_a1x; + unsigned long sc_astat; + unsigned long sc_rets; + unsigned long sc_pc; + unsigned long sc_retx; + unsigned long sc_fp; + unsigned long sc_i0; + unsigned long sc_i1; + unsigned long sc_i2; + unsigned long sc_i3; + unsigned long sc_m0; + unsigned long sc_m1; + unsigned long sc_m2; + unsigned long sc_m3; + unsigned long sc_l0; + unsigned long sc_l1; + unsigned long sc_l2; + unsigned long sc_l3; + unsigned long sc_b0; + unsigned long sc_b1; + unsigned long sc_b2; + unsigned long sc_b3; + unsigned long sc_lc0; + unsigned long sc_lc1; + unsigned long sc_lt0; + unsigned long sc_lt1; + unsigned long sc_lb0; + unsigned long sc_lb1; + unsigned long sc_seqstat; +}; + +#endif diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/asm/siginfo.h new file mode 100644 index 00000000000..eca4565cea3 --- /dev/null +++ b/arch/blackfin/include/asm/siginfo.h @@ -0,0 +1,35 @@ +#ifndef _BFIN_SIGINFO_H +#define _BFIN_SIGINFO_H + +#include <linux/types.h> +#include <asm-generic/siginfo.h> + +#define UID16_SIGINFO_COMPAT_NEEDED + +#define si_uid16 _sifields._kill._uid + +#define ILL_ILLPARAOP (__SI_FAULT|2) /* illegal opcode combine ********** */ +#define ILL_ILLEXCPT (__SI_FAULT|4) /* unrecoverable exception ********** */ +#define ILL_CPLB_VI (__SI_FAULT|9) /* D/I CPLB protect violation ******** */ +#define ILL_CPLB_MISS (__SI_FAULT|10) /* D/I CPLB miss ******** */ +#define ILL_CPLB_MULHIT (__SI_FAULT|11) /* D/I CPLB multiple hit ******** */ + +/* + * SIGBUS si_codes + */ +#define BUS_OPFETCH (__SI_FAULT|4) /* error from instruction fetch ******** */ + +/* + * SIGTRAP si_codes + */ +#define TRAP_STEP (__SI_FAULT|1) /* single-step breakpoint************* */ +#define TRAP_TRACEFLOW (__SI_FAULT|2) /* trace buffer overflow ************* */ +#define TRAP_WATCHPT (__SI_FAULT|3) /* watchpoint match ************* */ +#define TRAP_ILLTRAP (__SI_FAULT|4) /* illegal trap ************* */ + +/* + * SIGSEGV si_codes + */ +#define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */ + +#endif diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h new file mode 100644 index 00000000000..87951d25145 --- /dev/null +++ b/arch/blackfin/include/asm/signal.h @@ -0,0 +1,160 @@ +#ifndef _BLACKFIN_SIGNAL_H +#define _BLACKFIN_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer) (void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction) (int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include <asm/sigcontext.h> +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _BLACKFIN_SIGNAL_H */ diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h new file mode 100644 index 00000000000..2ca702e44d4 --- /dev/null +++ b/arch/blackfin/include/asm/socket.h @@ -0,0 +1,56 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h new file mode 100644 index 00000000000..426b89bfaa8 --- /dev/null +++ b/arch/blackfin/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_BFIN_SOCKIOS__ +#define __ARCH_BFIN_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_BFIN_SOCKIOS__ */ diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h new file mode 100644 index 00000000000..64e908a5064 --- /dev/null +++ b/arch/blackfin/include/asm/spinlock.h @@ -0,0 +1,6 @@ +#ifndef __BFIN_SPINLOCK_H +#define __BFIN_SPINLOCK_H + +#error blackfin architecture does not support SMP spin lock yet + +#endif diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/asm/stat.h new file mode 100644 index 00000000000..d2b6f11ec23 --- /dev/null +++ b/arch/blackfin/include/asm/stat.h @@ -0,0 +1,63 @@ +#ifndef _BFIN_STAT_H +#define _BFIN_STAT_H + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad2[4]; + + long long st_size; + unsigned long st_blksize; + + long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _BFIN_STAT_H */ diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h new file mode 100644 index 00000000000..350672091ba --- /dev/null +++ b/arch/blackfin/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_STATFS_H +#define _BFIN_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* _BFIN_STATFS_H */ diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h new file mode 100644 index 00000000000..321f4d96e4a --- /dev/null +++ b/arch/blackfin/include/asm/string.h @@ -0,0 +1,137 @@ +#ifndef _BLACKFIN_STRING_H_ +#define _BLACKFIN_STRING_H_ + +#include <linux/types.h> + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#define __HAVE_ARCH_STRCPY +extern inline char *strcpy(char *dest, const char *src) +{ + char *xdest = dest; + char temp = 0; + + __asm__ __volatile__ ( + "1:" + "%2 = B [%1++] (Z);" + "B [%0++] = %2;" + "CC = %2;" + "if cc jump 1b (bp);" + : "+&a" (dest), "+&a" (src), "=&d" (temp) + : + : "memory", "CC"); + + return xdest; +} + +#define __HAVE_ARCH_STRNCPY +extern inline char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + char temp = 0; + + if (n == 0) + return xdest; + + __asm__ __volatile__ ( + "1:" + "%3 = B [%1++] (Z);" + "B [%0++] = %3;" + "CC = %3;" + "if ! cc jump 2f;" + "%2 += -1;" + "CC = %2 == 0;" + "if ! cc jump 1b (bp);" + "jump 4f;" + "2:" + /* if src is shorter than n, we need to null pad bytes now */ + "%3 = 0;" + "3:" + "%2 += -1;" + "CC = %2 == 0;" + "if cc jump 4f;" + "B [%0++] = %3;" + "jump 3b;" + "4:" + : "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp) + : + : "memory", "CC"); + + return xdest; +} + +#define __HAVE_ARCH_STRCMP +extern inline int strcmp(const char *cs, const char *ct) +{ + /* need to use int's here so the char's in the assembly don't get + * sign extended incorrectly when we don't want them to be + */ + int __res1, __res2; + + __asm__ __volatile__ ( + "1:" + "%2 = B[%0++] (Z);" /* get *cs */ + "%3 = B[%1++] (Z);" /* get *ct */ + "CC = %2 == %3;" /* compare a byte */ + "if ! cc jump 2f;" /* not equal, break out */ + "CC = %2;" /* at end of cs? */ + "if cc jump 1b (bp);" /* no, keep going */ + "jump.s 3f;" /* strings are equal */ + "2:" + "%2 = %2 - %3;" /* *cs - *ct */ + "3:" + : "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2) + : + : "memory", "CC"); + + return __res1; +} + +#define __HAVE_ARCH_STRNCMP +extern inline int strncmp(const char *cs, const char *ct, size_t count) +{ + /* need to use int's here so the char's in the assembly don't get + * sign extended incorrectly when we don't want them to be + */ + int __res1, __res2; + + if (!count) + return 0; + + __asm__ __volatile__ ( + "1:" + "%3 = B[%0++] (Z);" /* get *cs */ + "%4 = B[%1++] (Z);" /* get *ct */ + "CC = %3 == %4;" /* compare a byte */ + "if ! cc jump 3f;" /* not equal, break out */ + "CC = %3;" /* at end of cs? */ + "if ! cc jump 4f;" /* yes, all done */ + "%2 += -1;" /* no, adjust count */ + "CC = %2 == 0;" + "if ! cc jump 1b;" /* more to do, keep going */ + "2:" + "%3 = 0;" /* strings are equal */ + "jump.s 4f;" + "3:" + "%3 = %3 - %4;" /* *cs - *ct */ + "4:" + : "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2) + : + : "memory", "CC"); + + return __res1; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *s, int c, size_t count); +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *d, const void *s, size_t count); +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *, const void *, __kernel_size_t); +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *s, int c, size_t n); +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *dest, const void *src, size_t count); + +#endif /*__KERNEL__*/ +#endif /* _BLACKFIN_STRING_H_ */ diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h new file mode 100644 index 00000000000..8f1627d8bf0 --- /dev/null +++ b/arch/blackfin/include/asm/system.h @@ -0,0 +1,221 @@ +/* + * File: include/asm/system.h + * Based on: + * Author: Tony Kou (tonyko@lineo.ca) + * Copyright (c) 2002 Arcturus Networks Inc. + * (www.arcturusnetworks.com) + * Copyright (c) 2003 Metrowerks (www.metrowerks.com) + * Copyright (c) 2004 Analog Device Inc. + * Created: 25Jan2001 - Tony Kou + * Description: system.h include file + * + * Modified: 22Sep2006 - Robin Getz + * - move include blackfin.h down, so I can get access to + * irq functions in other include files. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_SYSTEM_H +#define _BLACKFIN_SYSTEM_H + +#include <linux/linkage.h> +#include <linux/compiler.h> +#include <mach/anomaly.h> + +/* + * Interrupt configuring macros. + */ + +extern unsigned long irq_flags; + +#define local_irq_enable() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d" (irq_flags) \ + ) + +#define local_irq_disable() \ + do { \ + int __tmp_dummy; \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=d" (__tmp_dummy) \ + ); \ + } while (0) + +#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) +# define NOP_PAD_ANOMALY_05000244 "nop; nop;" +#else +# define NOP_PAD_ANOMALY_05000244 +#endif + +#define idle_with_irq_disabled() \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000244 \ + ".align 8;" \ + "sti %0;" \ + "idle;" \ + : \ + : "d" (irq_flags) \ + ) + +#ifdef CONFIG_DEBUG_HWERR +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %1;" \ + : "=&d" (x) \ + : "d" (0x3F) \ + ) +#else +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=&d" (x) \ + ) +#endif + +#define local_save_flags(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %0;" \ + : "=d" (x) \ + ) + +#ifdef CONFIG_DEBUG_HWERR +#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) +#else +#define irqs_enabled_from_flags(x) ((x) != 0x1f) +#endif + +#define local_irq_restore(x) \ + do { \ + if (irqs_enabled_from_flags(x)) \ + local_irq_enable(); \ + } while (0) + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !irqs_enabled_from_flags(flags); \ +}) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop;\n\t"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) + +#define read_barrier_depends() do { } while(0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { + unsigned long a[100]; +}; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long tmp = 0; + unsigned long flags = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("%0 = b%2 (z);\n\t" + "b%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("%0 = w%2 (z);\n\t" + "w%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("%0 = %2;\n\t" + "%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + local_irq_restore(flags); + return tmp; +} + +#include <asm-generic/cmpxchg-local.h> + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include <asm-generic/cmpxchg.h> +#endif + +#define prepare_to_switch() do { } while(0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. + */ + +#include <asm/blackfin.h> + +asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next); + +#define switch_to(prev,next,last) \ +do { \ + memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + (last) = resume (prev, next); \ +} while (0) + +#endif /* _BLACKFIN_SYSTEM_H */ diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h new file mode 100644 index 00000000000..f37feb7cf89 --- /dev/null +++ b/arch/blackfin/include/asm/termbits.h @@ -0,0 +1,198 @@ +#ifndef __ARCH_BFIN_TERMBITS_H__ +#define __ARCH_BFIN_TERMBITS_H__ + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_BFIN_TERMBITS_H__ */ diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h new file mode 100644 index 00000000000..d50d063c605 --- /dev/null +++ b/arch/blackfin/include/asm/termios.h @@ -0,0 +1,94 @@ +#ifndef __BFIN_TERMIOS_H__ +#define __BFIN_TERMIOS_H__ + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) \ + copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) \ + copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __BFIN_TERMIOS_H__ */ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h new file mode 100644 index 00000000000..642769329d1 --- /dev/null +++ b/arch/blackfin/include/asm/thread_info.h @@ -0,0 +1,135 @@ +/* + * File: include/asm-blackfin/thread_info.h + * Based on: include/asm-m68knommu/thread_info.h + * Author: LG Soft India + * Copyright (C) 2004-2005 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: Blackfin low-level thread information + * Modified: + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include <asm/page.h> +#include <asm/entry.h> +#include <asm/l1layout.h> +#include <linux/compiler.h> + +#ifdef __KERNEL__ + +/* Thread Align Mask to reach to the top of the stack + * for any process + */ +#define ALIGN_PAGE_MASK 0xffffe000 + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE 8192 /* 2 pages */ + +#ifndef __ASSEMBLY__ + +typedef unsigned long mm_segment_t; + +/* + * low level task data. + * If you change this, change the TI_* offsets below to match. + */ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* address limit */ + struct restart_block restart_block; + struct l1_scratch_task_info l1_task_info; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* Given a task stack pointer, you can find its corresponding + * thread_info structure just by masking it to the THREAD_SIZE + * boundary (currently 8K as you can see above). + */ +__attribute_const__ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__("%0 = sp;": "=&d"(ti): + ); + return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1)); +} + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets in thread_info structure, used in assembly code + */ +#define TI_TASK 0 +#define TI_EXECDOMAIN 4 +#define TI_FLAGS 8 +#define TI_CPU 12 +#define TI_PREEMPT 16 + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 4 +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ +#define TIF_FREEZE 6 /* is freezing for suspend */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) +#define _TIF_FREEZE (1<<TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h new file mode 100644 index 00000000000..ddc43ce3853 --- /dev/null +++ b/arch/blackfin/include/asm/time.h @@ -0,0 +1,40 @@ +/* + * asm-blackfin/time.h: + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ASM_BLACKFIN_TIME_H +#define _ASM_BLACKFIN_TIME_H + +/* + * The way that the Blackfin core timer works is: + * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) + * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) + * + * If you take the fastest clock (1ns, or 1GHz to make the math work easier) + * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter + * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need + * to use TSCALE, and program it to zero (which is pass CCLK through). + * If you feel like using it, try to keep HZ * TIMESCALE to some + * value that divides easy (like power of 2). + */ + +#ifndef CONFIG_CPU_FREQ +#define TIME_SCALE 1 +#define __bfin_cycles_off (0) +#define __bfin_cycles_mod (0) +#else +/* + * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . + * Whenever we change the Core Clock frequency changes we immediately + * adjust the Core Timer Presale Register. This way we don't lose time. + */ +#define TIME_SCALE 4 +extern unsigned long long __bfin_cycles_off; +extern unsigned int __bfin_cycles_mod; +#endif + +#endif diff --git a/arch/blackfin/include/asm/timex.h b/arch/blackfin/include/asm/timex.h new file mode 100644 index 00000000000..22b0806161b --- /dev/null +++ b/arch/blackfin/include/asm/timex.h @@ -0,0 +1,23 @@ +/* + * asm-blackfin/timex.h: cpu cycles! + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ASM_BLACKFIN_TIMEX_H +#define _ASM_BLACKFIN_TIMEX_H + +#define CLOCK_TICK_RATE 1000000 /* Underlying HZ */ + +typedef unsigned long long cycles_t; + +static inline cycles_t get_cycles(void) +{ + unsigned long tmp, tmp2; + __asm__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2)); + return tmp | ((cycles_t)tmp2 << 32); +} + +#endif diff --git a/arch/blackfin/include/asm/tlb.h b/arch/blackfin/include/asm/tlb.h new file mode 100644 index 00000000000..89a12ee916d --- /dev/null +++ b/arch/blackfin/include/asm/tlb.h @@ -0,0 +1,16 @@ +#ifndef _BLACKFIN_TLB_H +#define _BLACKFIN_TLB_H + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it + * fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#endif /* _BLACKFIN_TLB_H */ diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h new file mode 100644 index 00000000000..277b400924b --- /dev/null +++ b/arch/blackfin/include/asm/tlbflush.h @@ -0,0 +1,56 @@ +#ifndef _BLACKFIN_TLBFLUSH_H +#define _BLACKFIN_TLBFLUSH_H + +/* + * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> + * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> + */ + +#include <asm/setup.h> + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +#endif diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h new file mode 100644 index 00000000000..acee2398789 --- /dev/null +++ b/arch/blackfin/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BLACKFIN_TOPOLOGY_H +#define _ASM_BLACKFIN_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_BLACKFIN_TOPOLOGY_H */ diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h new file mode 100644 index 00000000000..312b596b973 --- /dev/null +++ b/arch/blackfin/include/asm/trace.h @@ -0,0 +1,94 @@ +/* + * Common header file for blackfin family of processors. + * + */ + +#ifndef _BLACKFIN_TRACE_ +#define _BLACKFIN_TRACE_ + +/* Normally, we use ON, but you can't turn on software expansion until + * interrupts subsystem is ready + */ + +#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03) +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +#define BFIN_TRACE_ON (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2)) +#else +#define BFIN_TRACE_ON (BFIN_TRACE_INIT) +#endif + +#ifndef __ASSEMBLY__ +extern unsigned long trace_buff_offset; +extern unsigned long software_trace_buff[]; + +/* Trace Macros for C files */ + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + +#define trace_buffer_save(x) \ + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) + +#define trace_buffer_restore(x) \ + do { \ + bfin_write_TBUFCTL((x)); \ + } while (0) +#else /* DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_save(x) +#define trace_buffer_restore(x) +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + +#else +/* Trace Macros for Assembly files */ + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + +#define trace_buffer_stop(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = 0x1; \ + [preg] = dreg; + +#define trace_buffer_init(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = BFIN_TRACE_INIT; \ + [preg] = dreg; + +#define trace_buffer_save(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = [preg]; \ + [--sp] = dreg; \ + dreg = 0x1; \ + [preg] = dreg; + +#define trace_buffer_restore(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = [sp++]; \ + [preg] = dreg; + +#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_stop(preg, dreg) +#define trace_buffer_init(preg, dreg) +#define trace_buffer_save(preg, dreg) +#define trace_buffer_restore(preg, dreg) + +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + +#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE +# define DEBUG_HWTRACE_SAVE(preg, dreg) trace_buffer_save(preg, dreg) +# define DEBUG_HWTRACE_RESTORE(preg, dreg) trace_buffer_restore(preg, dreg) +#else +# define DEBUG_HWTRACE_SAVE(preg, dreg) +# define DEBUG_HWTRACE_RESTORE(preg, dreg) +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _BLACKFIN_TRACE_ */ diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h new file mode 100644 index 00000000000..f0e5f940d9c --- /dev/null +++ b/arch/blackfin/include/asm/traps.h @@ -0,0 +1,131 @@ +/* + * linux/include/asm/traps.h + * + * Copyright (C) 1993 Hamish Macdonald + * + * Lineo, Inc Jul 2001 Tony Kou + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _BFIN_TRAPS_H +#define _BFIN_TRAPS_H + +#define VEC_SYS (0) +#define VEC_EXCPT01 (1) +#define VEC_EXCPT02 (2) +#define VEC_EXCPT03 (3) +#define VEC_EXCPT04 (4) +#define VEC_EXCPT05 (5) +#define VEC_EXCPT06 (6) +#define VEC_EXCPT07 (7) +#define VEC_EXCPT08 (8) +#define VEC_EXCPT09 (9) +#define VEC_EXCPT10 (10) +#define VEC_EXCPT11 (11) +#define VEC_EXCPT12 (12) +#define VEC_EXCPT13 (13) +#define VEC_EXCPT14 (14) +#define VEC_EXCPT15 (15) +#define VEC_STEP (16) +#define VEC_OVFLOW (17) +#define VEC_UNDEF_I (33) +#define VEC_ILGAL_I (34) +#define VEC_CPLB_VL (35) +#define VEC_MISALI_D (36) +#define VEC_UNCOV (37) +#define VEC_CPLB_M (38) +#define VEC_CPLB_MHIT (39) +#define VEC_WATCH (40) +#define VEC_ISTRU_VL (41) /*ADSP-BF535 only (MH) */ +#define VEC_MISALI_I (42) +#define VEC_CPLB_I_VL (43) +#define VEC_CPLB_I_M (44) +#define VEC_CPLB_I_MHIT (45) +#define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ +/* The hardware reserves (63) for future use - we use it to tell our + * normal exception handling code we have a hardware error + */ +#define VEC_HWERR (63) + +#ifndef __ASSEMBLY__ + +#define HWC_x2(level) \ + "System MMR Error\n" \ + level " - An error occurred due to an invalid access to an System MMR location\n" \ + level " Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \ + level " or a 16-bit register is accessed with a 32-bit instruction.\n" +#define HWC_x3(level) \ + "External Memory Addressing Error\n" +#define HWC_x12(level) \ + "Performance Monitor Overflow\n" +#define HWC_x18(level) \ + "RAISE 5 instruction\n" \ + level " Software issued a RAISE 5 instruction to invoke the Hardware\n" +#define HWC_default(level) \ + "Reserved\n" +#define EXC_0x03(level) \ + "Application stack overflow\n" \ + level " - Please increase the stack size of the application using elf2flt -s option,\n" \ + level " and/or reduce the stack use of the application.\n" +#define EXC_0x10(level) \ + "Single step\n" \ + level " - When the processor is in single step mode, every instruction\n" \ + level " generates an exception. Primarily used for debugging.\n" +#define EXC_0x11(level) \ + "Exception caused by a trace buffer full condition\n" \ + level " - The processor takes this exception when the trace\n" \ + level " buffer overflows (only when enabled by the Trace Unit Control register).\n" +#define EXC_0x21(level) \ + "Undefined instruction\n" \ + level " - May be used to emulate instructions that are not defined for\n" \ + level " a particular processor implementation.\n" +#define EXC_0x22(level) \ + "Illegal instruction combination\n" \ + level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \ + level " Processor Instruction Set Reference.\n" +#define EXC_0x23(level) \ + "Data access CPLB protection violation\n" \ + level " - Attempted read or write to Supervisor resource,\n" \ + level " or illegal data memory access. \n" +#define EXC_0x24(level) \ + "Data access misaligned address violation\n" \ + level " - Attempted misaligned data memory or data cache access.\n" +#define EXC_0x25(level) \ + "Unrecoverable event\n" \ + level " - For example, an exception generated while processing a previous exception.\n" +#define EXC_0x26(level) \ + "Data access CPLB miss\n" \ + level " - Used by the MMU to signal a CPLB miss on a data access.\n" +#define EXC_0x27(level) \ + "Data access multiple CPLB hits\n" \ + level " - More than one CPLB entry matches data fetch address.\n" +#define EXC_0x28(level) \ + "Program Sequencer Exception caused by an emulation watchpoint match\n" \ + level " - There is a watchpoint match, and one of the EMUSW\n" \ + level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" +#define EXC_0x2A(level) \ + "Instruction fetch misaligned address violation\n" \ + level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \ + level " exception, the return address provided in RETX is the destination address which is\n" \ + level " misaligned, rather than the address of the offending instruction.\n" +#define EXC_0x2B(level) \ + "CPLB protection violation\n" \ + level " - Illegal instruction fetch access (memory protection violation).\n" +#define EXC_0x2C(level) \ + "Instruction fetch CPLB miss\n" \ + level " - CPLB miss on an instruction fetch.\n" +#define EXC_0x2D(level) \ + "Instruction fetch multiple CPLB hits\n" \ + level " - More than one CPLB entry matches instruction fetch address.\n" +#define EXC_0x2E(level) \ + "Illegal use of supervisor resource\n" \ + level " - Attempted to use a Supervisor register or instruction from User mode.\n" \ + level " Supervisor resources are registers and instructions that are reserved\n" \ + level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \ + level " only instructions.\n" + +#endif /* __ASSEMBLY__ */ +#endif /* _BFIN_TRAPS_H */ diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h new file mode 100644 index 00000000000..8441cbc2bf9 --- /dev/null +++ b/arch/blackfin/include/asm/types.h @@ -0,0 +1,36 @@ +#ifndef _BFIN_TYPES_H +#define _BFIN_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _BFIN_TYPES_H */ diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h new file mode 100644 index 00000000000..d928b809905 --- /dev/null +++ b/arch/blackfin/include/asm/uaccess.h @@ -0,0 +1,271 @@ +/* Changes made by Lineo Inc. May 2001 + * + * Based on: include/asm-m68knommu/uaccess.h + */ + +#ifndef __BLACKFIN_UACCESS_H +#define __BLACKFIN_UACCESS_H + +/* + * User space memory access functions + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/string.h> + +#include <asm/segment.h> +#ifdef CONFIG_ACCESS_CHECK +# include <asm/bfin-global.h> +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) + +static inline void set_fs(mm_segment_t fs) +{ + current_thread_info()->addr_limit = fs; +} + +#define segment_eq(a,b) ((a) == (b)) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) + +static inline int is_in_rom(unsigned long addr) +{ + /* + * What we are really trying to do is determine if addr is + * in an allocated kernel memory region. If not then assume + * we cannot free it or otherwise de-allocate it. Ideally + * we could restrict this to really being in a ROM or flash, + * but that would need to be done on a board by board basis, + * not globally. + */ + if ((addr < _ramstart) || (addr >= _ramend)) + return (1); + + /* Default case, not in ROM */ + return (0); +} + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + */ + +#ifndef CONFIG_ACCESS_CHECK +static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } +#else +#ifdef CONFIG_ACCESS_OK_L1 +extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); +#else +extern int _access_ok(unsigned long addr, unsigned long size); +#endif +#endif + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x,p) \ + ({ \ + int _err = 0; \ + typeof(*(p)) _x = (x); \ + typeof(*(p)) *_p = (p); \ + if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ + _err = -EFAULT; \ + } \ + else { \ + switch (sizeof (*(_p))) { \ + case 1: \ + __put_user_asm(_x, _p, B); \ + break; \ + case 2: \ + __put_user_asm(_x, _p, W); \ + break; \ + case 4: \ + __put_user_asm(_x, _p, ); \ + break; \ + case 8: { \ + long _xl, _xh; \ + _xl = ((long *)&_x)[0]; \ + _xh = ((long *)&_x)[1]; \ + __put_user_asm(_xl, ((long *)_p)+0, ); \ + __put_user_asm(_xh, ((long *)_p)+1, ); \ + } break; \ + default: \ + _err = __put_user_bad(); \ + break; \ + } \ + } \ + _err; \ + }) + +#define __put_user(x,p) put_user(x,p) +static inline int bad_user_access_length(void) +{ + panic("bad_user_access_length"); + return -1; +} + +#define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ + __FILE__, __LINE__, __func__),\ + bad_user_access_length(), (-EFAULT)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(x,p,bhw) \ + __asm__ (#bhw"[%1] = %0;\n\t" \ + : /* no outputs */ \ + :"d" (x),"a" (__ptr(p)) : "memory") + +#define get_user(x,p) \ + ({ \ + int _err = 0; \ + typeof(*(p)) *_p = (p); \ + if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) { \ + _err = -EFAULT; \ + } \ + else { \ + switch (sizeof(*(_p))) { \ + case 1: \ + __get_user_asm(x, _p, B,(Z)); \ + break; \ + case 2: \ + __get_user_asm(x, _p, W,(Z)); \ + break; \ + case 4: \ + __get_user_asm(x, _p, , ); \ + break; \ + case 8: { \ + unsigned long _xl, _xh; \ + __get_user_asm(_xl, ((unsigned long *)_p)+0, , ); \ + __get_user_asm(_xh, ((unsigned long *)_p)+1, , ); \ + ((unsigned long *)&x)[0] = _xl; \ + ((unsigned long *)&x)[1] = _xh; \ + } break; \ + default: \ + x = 0; \ + printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ + __FILE__, __LINE__, __func__); \ + _err = __get_user_bad(); \ + break; \ + } \ + } \ + _err; \ + }) + +#define __get_user(x,p) get_user(x,p) + +#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define __get_user_asm(x,p,bhw,option) \ + { \ + unsigned long _tmp; \ + __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ + : "=d" (_tmp) \ + : "a" (__ptr(p))); \ + (x) = (__typeof__(*(p))) _tmp; \ + } + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\ + return retval; }) + +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ + return retval; }) + +static inline long copy_from_user(void *to, + const void __user * from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + memcpy(to, from, n); + else + return n; + return 0; +} + +static inline long copy_to_user(void *to, + const void __user * from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + memcpy(to, from, n); + else + return n; + return 0; +} + +/* + * Copy a null terminated string from userspace. + */ + +static inline long strncpy_from_user(char *dst, + const char *src, long count) +{ + char *tmp; + if (!access_ok(VERIFY_READ, src, 1)) + return -EFAULT; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) ; + return (tmp - dst); +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return (strlen(src) + 1); +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long __clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +#define clear_user(to, n) __clear_user(to, n) + +#endif /* _BLACKFIN_UACCESS_H */ diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h new file mode 100644 index 00000000000..4a4e3856beb --- /dev/null +++ b/arch/blackfin/include/asm/ucontext.h @@ -0,0 +1,17 @@ +/** Changes made by Tony Kou Lineo Inc. May 2001 + * + * Based on: include/m68knommu/ucontext.h + */ + +#ifndef _BLACKFIN_UCONTEXT_H +#define _BLACKFIN_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; /* the others are necessary */ + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _BLACKFIN_UCONTEXT_H */ diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h new file mode 100644 index 00000000000..fd8a1d63494 --- /dev/null +++ b/arch/blackfin/include/asm/unaligned.h @@ -0,0 +1,11 @@ +#ifndef _ASM_BLACKFIN_UNALIGNED_H +#define _ASM_BLACKFIN_UNALIGNED_H + +#include <linux/unaligned/le_struct.h> +#include <linux/unaligned/be_byteshift.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_BLACKFIN_UNALIGNED_H */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h new file mode 100644 index 00000000000..1e57b636e0b --- /dev/null +++ b/arch/blackfin/include/asm/unistd.h @@ -0,0 +1,438 @@ +#ifndef __ASM_BFIN_UNISTD_H +#define __ASM_BFIN_UNISTD_H +/* + * This file contains the system call numbers. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 + /* 7 __NR_waitpid obsolete */ +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 + /* 17 __NR_break obsolete */ + /* 18 __NR_oldstat obsolete */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 + /* 22 __NR_umount obsolete */ +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 + /* 28 __NR_oldfstat obsolete */ +#define __NR_pause 29 + /* 30 __NR_utime obsolete */ + /* 31 __NR_stty obsolete */ + /* 32 __NR_gtty obsolete */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 __NR_ftime obsolete */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 __NR_prof obsolete */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 + /* 48 __NR_signal obsolete */ +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 __NR_lock obsolete */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 __NR_mpx obsolete */ +#define __NR_setpgid 57 + /* 58 __NR_ulimit obsolete */ + /* 59 __NR_oldolduname obsolete */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 + /* 67 __NR_sigaction obsolete */ +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 + /* 72 __NR_sigsuspend obsolete */ + /* 73 __NR_sigpending obsolete */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 + /* 76 __NR_old_getrlimit obsolete */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 __NR_select obsolete */ +#define __NR_symlink 83 + /* 84 __NR_oldlstat obsolete */ +#define __NR_readlink 85 + /* 86 __NR_uselib obsolete */ + /* 87 __NR_swapon obsolete */ +#define __NR_reboot 88 + /* 89 __NR_readdir obsolete */ + /* 90 __NR_mmap obsolete */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 __NR_profil obsolete */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 __NR_ioperm */ + /* 102 __NR_socketcall obsolete */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 + /* 109 __NR_olduname obsolete */ + /* 110 __NR_iopl obsolete */ +#define __NR_vhangup 111 + /* 112 __NR_idle obsolete */ + /* 113 __NR_vm86old */ +#define __NR_wait4 114 + /* 115 __NR_swapoff obsolete */ +#define __NR_sysinfo 116 + /* 117 __NR_ipc oboslete */ +#define __NR_fsync 118 + /* 119 __NR_sigreturn obsolete */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 + /* 123 __NR_modify_ldt obsolete */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 + /* 126 __NR_sigprocmask obsolete */ + /* 127 __NR_create_module obsolete */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 __NR_get_kernel_syms obsolete */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 + /* 135 was sysfs */ +#define __NR_personality 136 + /* 137 __NR_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 + /* 142 __NR__newselect obsolete */ +#define __NR_flock 143 + /* 144 __NR_msync obsolete */ +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 + /* 150 __NR_mlock */ + /* 151 __NR_munlock */ + /* 152 __NR_mlockall */ + /* 153 __NR_munlockall */ +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 __NR_vm86 */ + /* 167 __NR_query_module */ + /* 168 __NR_poll */ +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread 180 +#define __NR_pwrite 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 __NR_getpmsg */ + /* 189 __NR_putpmsg */ +#define __NR_vfork 190 +#define __NR_getrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 + /* 218 __NR_mincore */ + /* 219 __NR_madvise */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 reserved for TUX */ + /* 223 reserved for TUX */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 __NR_set_thread_area */ + /* 244 __NR_get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 + /* 250 __NR_alloc_hugepages */ + /* 251 __NR_free_hugepages */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_bfin_spinlock 254 + +#define __NR_epoll_create 255 +#define __NR_epoll_ctl 256 +#define __NR_epoll_wait 257 + /* 258 __NR_remap_file_pages */ +#define __NR_set_tid_address 259 +#define __NR_timer_create 260 +#define __NR_timer_settime 261 +#define __NR_timer_gettime 262 +#define __NR_timer_getoverrun 263 +#define __NR_timer_delete 264 +#define __NR_clock_settime 265 +#define __NR_clock_gettime 266 +#define __NR_clock_getres 267 +#define __NR_clock_nanosleep 268 +#define __NR_statfs64 269 +#define __NR_fstatfs64 270 +#define __NR_tgkill 271 +#define __NR_utimes 272 +#define __NR_fadvise64_64 273 + /* 274 __NR_vserver */ + /* 275 __NR_mbind */ + /* 276 __NR_get_mempolicy */ + /* 277 __NR_set_mempolicy */ +#define __NR_mq_open 278 +#define __NR_mq_unlink 279 +#define __NR_mq_timedsend 280 +#define __NR_mq_timedreceive 281 +#define __NR_mq_notify 282 +#define __NR_mq_getsetattr 283 +#define __NR_kexec_load 284 +#define __NR_waitid 285 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 + /* 294 __NR_migrate_pages */ +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 + +/* Blackfin private syscalls */ +#define __NR_sram_alloc 311 +#define __NR_sram_free 312 +#define __NR_dma_memcpy 313 + +/* socket syscalls */ +#define __NR_accept 314 +#define __NR_bind 315 +#define __NR_connect 316 +#define __NR_getpeername 317 +#define __NR_getsockname 318 +#define __NR_getsockopt 319 +#define __NR_listen 320 +#define __NR_recv 321 +#define __NR_recvfrom 322 +#define __NR_recvmsg 323 +#define __NR_send 324 +#define __NR_sendmsg 325 +#define __NR_sendto 326 +#define __NR_setsockopt 327 +#define __NR_shutdown 328 +#define __NR_socket 329 +#define __NR_socketpair 330 + +/* sysv ipc syscalls */ +#define __NR_semctl 331 +#define __NR_semget 332 +#define __NR_semop 333 +#define __NR_msgctl 334 +#define __NR_msgget 335 +#define __NR_msgrcv 336 +#define __NR_msgsnd 337 +#define __NR_shmat 338 +#define __NR_shmctl 339 +#define __NR_shmdt 340 +#define __NR_shmget 341 + +#define __NR_splice 342 +#define __NR_sync_file_range 343 +#define __NR_tee 344 +#define __NR_vmsplice 345 + +#define __NR_epoll_pwait 346 +#define __NR_utimensat 347 +#define __NR_signalfd 348 +#define __NR_timerfd_create 349 +#define __NR_eventfd 350 +#define __NR_pread64 351 +#define __NR_pwrite64 352 +#define __NR_fadvise64 353 +#define __NR_set_robust_list 354 +#define __NR_get_robust_list 355 +#define __NR_fallocate 356 +#define __NR_semtimedop 357 +#define __NR_timerfd_settime 358 +#define __NR_timerfd_gettime 359 +#define __NR_signalfd4 360 +#define __NR_eventfd2 361 +#define __NR_epoll_create1 362 +#define __NR_dup3 363 +#define __NR_pipe2 364 +#define __NR_inotify_init1 365 + +#define __NR_syscall 366 +#define NR_syscalls __NR_syscall + +/* Old optional stuff no one actually uses */ +#define __IGNORE_sysfs +#define __IGNORE_uselib + +/* Implement the newer interfaces */ +#define __IGNORE_mmap +#define __IGNORE_poll +#define __IGNORE_select +#define __IGNORE_utime + +/* Not relevant on no-mmu */ +#define __IGNORE_swapon +#define __IGNORE_swapoff +#define __IGNORE_msync +#define __IGNORE_mlock +#define __IGNORE_munlock +#define __IGNORE_mlockall +#define __IGNORE_munlockall +#define __IGNORE_mincore +#define __IGNORE_madvise +#define __IGNORE_remap_file_pages +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages +#define __IGNORE_getcpu + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall"); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_BFIN_UNISTD_H */ diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h new file mode 100644 index 00000000000..afe6a0e1f7c --- /dev/null +++ b/arch/blackfin/include/asm/user.h @@ -0,0 +1,89 @@ +#ifndef _BFIN_USER_H +#define _BFIN_USER_H + +/* Changes by Tony Kou Lineo, Inc. July, 2001 + * + * Based include/asm-m68knommu/user.h + * + */ + +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ +struct user_bfinfp_struct { +}; + +/* This is the old layout of "struct pt_regs" as of Linux 1.x, and + is still the layout used by user (the new pt_regs doesn't have + all registers). */ +struct user_regs_struct { + long r0, r1, r2, r3, r4, r5, r6, r7; + long p0, p1, p2, p3, p4, p5, usp, fp; + long i0, i1, i2, i3; + long l0, l1, l2, l3; + long b0, b1, b2, b3; + long m0, m1, m2, m3; + long a0w, a1w; + long a0x, a1x; + unsigned long rets; + unsigned long astat; + unsigned long pc; + unsigned long orig_p0; +}; + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ + +struct user { +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + + struct user_regs_struct regs; /* Where the registers are actually stored */ + +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + unsigned long u_ar0; + /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 31bd9bf3efa..faea88ebb2e 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -32,7 +32,7 @@ #include <asm/errno.h> #include <asm/asm-offsets.h> -#include <asm/mach-common/context.S> +#include <asm/context.S> #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index c3334cc5bcb..28c48619120 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h new file mode 100644 index 00000000000..b7b166f4f06 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -0,0 +1,104 @@ +/* + * File: include/asm-blackfin/mach-bf527/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* New Feature: EMAC TX DMA Word Alignment */ +#define ANOMALY_05000285 (1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (1) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (1) +/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ +#define ANOMALY_05000342 (1) +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (1) +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (1) +/* Security Features Are Not Functional */ +#define ANOMALY_05000348 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000364 (__SILICON_REVISION__ > 0) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* New Feature: Higher Default CCLK Rate */ +#define ANOMALY_05000368 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Authentication Fails To Initiate */ +#define ANOMALY_05000376 (__SILICON_REVISION__ > 0) +/* Data Read From L3 Memory by USB DMA May be Corrupted */ +#define ANOMALY_05000380 (1) +/* USB Full-speed Mode not Fully Tested */ +#define ANOMALY_05000381 (1) +/* New Feature: Boot from OTP Memory */ +#define ANOMALY_05000385 (1) +/* New Feature: bfrom_SysControl() Routine */ +#define ANOMALY_05000386 (1) +/* New Feature: Programmable Preboot Settings */ +#define ANOMALY_05000387 (1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (1) +/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (1) +/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (1) +/* New Feature: Log Buffer Functionality */ +#define ANOMALY_05000394 (1) +/* New Feature: Hook Routine Functionality */ +#define ANOMALY_05000395 (1) +/* New Feature: Header Indirect Bit */ +#define ANOMALY_05000396 (1) +/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */ +#define ANOMALY_05000397 (1) +/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */ +#define ANOMALY_05000398 (1) +/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */ +#define ANOMALY_05000399 (1) +/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ +#define ANOMALY_05000401 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h new file mode 100644 index 00000000000..056eb4b9cd2 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -0,0 +1,127 @@ +/* + * File: include/asm-blackfin/mach-bf527/bf527.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Michael Hennerich (michael.hennerich@analog.com) + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF527_H__ +#define __MACH_BF527_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF527 +#define CPU "BF527" +#endif +#ifdef CONFIG_BF525 +#define CPU "BF525" +#endif +#ifdef CONFIG_BF522 +#define CPU "BF522" +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF527_H__ */ diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..2526b6ed6fa --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -0,0 +1,195 @@ +/* + * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) +#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) +#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) +#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) +#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +#define DRIVER_NAME "bfin-uart" + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_output(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h new file mode 100644 index 00000000000..cfd8ad4f1f2 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h @@ -0,0 +1,142 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR1 + ret = peripheral_request(P_UART1_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART1_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h new file mode 100644 index 00000000000..297821e2d79 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h @@ -0,0 +1,93 @@ +/* + * File: include/asm-blackfin/mach-bf527/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF527_FAMILY + +#include "bf527.h" +#include "mem_map.h" +#include "defBF522.h" +#include "anomaly.h" + +#if defined(CONFIG_BF527) || defined(CONFIG_BF526) +#include "defBF527.h" +#endif + +#if defined(CONFIG_BF525) || defined(CONFIG_BF524) +#include "defBF525.h" +#endif + +#if !defined(__ASSEMBLY__) +#include "cdefBF522.h" + +#if defined(CONFIG_BF527) || defined(CONFIG_BF526) +#include "cdefBF527.h" +#endif + +#if defined(CONFIG_BF525) || defined(CONFIG_BF524) +#include "cdefBF525.h" +#endif +#endif + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h new file mode 100644 index 00000000000..663c2bbdfd9 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h @@ -0,0 +1,46 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf522.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF522_H +#define _CDEF_BF522_H + +/* include all Core registers and bit definitions */ +#include "defBF522.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +#endif /* _CDEF_BF522_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h new file mode 100644 index 00000000000..00377eb59b7 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -0,0 +1,461 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf525.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF525_H +#define _CDEF_BF525_H + +/* include all Core registers and bit definitions */ +#include "defBF525.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF525_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h new file mode 100644 index 00000000000..fca8db70811 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -0,0 +1,626 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf527.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF527_H +#define _CDEF_BF527_H + +/* include all Core registers and bit definitions */ +#include "defBF527.h" + +/* include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h new file mode 100644 index 00000000000..9a814b9a12b --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -0,0 +1,1204 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF52X_H +#define _CDEF_BF52X_H + +#include <asm/system.h> +#include <asm/blackfin.h> + +#include "defBF52x_base.h" + +/* Include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* ==== begin from cdefBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 6)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 6)), val) + +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) + +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 6)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 6)), val) + +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + (x << 6)) +#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + (x << 6)), val) + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ + +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX32) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX32, val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX32) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX32, val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX16) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX16, val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX16) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX16, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX32) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX32, val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX32) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX32, val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX16) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX16, val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX16) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX16, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) + + +/* DMA Traffic Control Registers */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER, val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT, val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) + +/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +/* ==== end from cdefBF534.h ==== */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ + +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) + +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) +#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) +#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) +#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) +#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) +#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) +#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) +#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) +#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) +#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) +#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) +#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) +#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) +#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) +#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) +#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) +#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +#endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h new file mode 100644 index 00000000000..0a8cdcdf0b4 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -0,0 +1,42 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF522.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF522_H +#define _DEF_BF522_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +#endif /* _DEF_BF522_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h new file mode 100644 index 00000000000..5cd7576fef7 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -0,0 +1,713 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF525.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF525_H +#define _DEF_BF525_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF525_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h new file mode 100644 index 00000000000..f040f364afa --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -0,0 +1,1090 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF527.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF527_H +#define _DEF_BF527_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF527_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h new file mode 100644 index 00000000000..6ac2ed7026e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -0,0 +1,2005 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF52X_H +#define _DEF_BF52X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */ +/* ************************************************************** */ + +/* ==== begin from defBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Device ID Register */ + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ + +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ + + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + + +/* DMA Traffic Control Registers */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + + +/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ +#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ +#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ +#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ +#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ +#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ + + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ + +#if 0 +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ + +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ +#endif + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 + #define ICTL_P1 0x02 +#define TRO_P 0x0F + + + +/* *************** REAL TIME CLOCK MASKS **************************/ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ALARM Macro z=day y=hr x=min w=sec */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + + +/* Omit CAN masks from defBF534.h */ + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW + +/* ==== end from defBF534.h ==== */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ +#define HOST_STATUS 0xffc03404 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc03500 /* Configuration Register */ +#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc03508 /* Status Register */ +#define CNT_COMMAND 0xffc0350c /* Command Register */ +#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ +#define CNT_COUNTER 0xffc03514 /* Counter Register */ +#define CNT_MAX 0xffc03518 /* Maximal Count Register */ +#define CNT_MIN 0xffc0351c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc03624 /* Secure Control */ +#define SECURE_STATUS 0xffc03628 /* Secure Status */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* NFC Registers */ + +#define NFC_CTL 0xffc03700 /* NAND Control Register */ +#define NFC_STAT 0xffc03704 /* NAND Status Register */ +#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */ +#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */ +#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */ +#define NFC_READ 0xffc0372c /* NAND Read Data Register */ +#define NFC_ADDR 0xffc03740 /* NAND Address Register */ +#define NFC_CMD 0xffc03744 /* NAND Command Register */ +#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */ +#define HOST_CNTR_nHOST_EN 0x0 +#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */ +#define HOST_CNTR_nHOST_END 0x0 +#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */ +#define HOST_CNTR_nDATA_SIZE 0x0 +#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */ +#define HOST_CNTR_nHOST_RST 0x0 +#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */ +#define HOST_CNTR_nHRDY_OVR 0x0 +#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */ +#define HOST_CNTR_nINT_MODE 0x0 +#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */ +#define HOST_CNTR_ nBT_EN 0x0 +#define HOST_CNTR_EHW 0x100 /* Enable Host Write */ +#define HOST_CNTR_nEHW 0x0 +#define HOST_CNTR_EHR 0x200 /* Enable Host Read */ +#define HOST_CNTR_nEHR 0x0 +#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */ +#define HOST_CNTR_nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define HOST_STAT_READY 0x1 /* DMA Ready */ +#define HOST_STAT_nREADY 0x0 +#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */ +#define HOST_STAT_nFIFOFULL 0x0 +#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */ +#define HOST_STAT_nFIFOEMPTY 0x0 +#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */ +#define HOST_STAT_nCOMPLETE 0x0 +#define HOST_STAT_HSHK 0x10 /* Host Handshake */ +#define HOST_STAT_nHSHK 0x0 +#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */ +#define HOST_STAT_nTIMEOUT 0x0 +#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */ +#define HOST_STAT_nHIRQ 0x0 +#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define HOST_STAT_nALLOW_CNFG 0x0 +#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */ +#define HOST_STAT_nDMA_DIR 0x0 +#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */ +#define HOST_STAT_nBTE 0x0 +#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ +#define HOST_STAT_nHOSTRD_DONE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define nCNTE 0x0 +#define DEBE 0x2 /* Debounce Enable */ +#define nDEBE 0x0 +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define nCDGINV 0x0 +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define nCUDINV 0x0 +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define nCZMINV 0x0 +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define nZMZC 0x0 +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ +#define nINPDIS 0x0 + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define nICIE 0x0 +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define nUCIE 0x0 +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define nDCIE 0x0 +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define nMINCIE 0x0 +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define nMAXCIE 0x0 +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define nCOV31IE 0x0 +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define nCOV15IE 0x0 +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define nCZEROIE 0x0 +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define nCZMIE 0x0 +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define nCZMEIE 0x0 +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ +#define nCZMZIE 0x0 + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define nICII 0x0 +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define nUCII 0x0 +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define nDCII 0x0 +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define nMINCII 0x0 +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define nMAXCII 0x0 +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define nCOV31II 0x0 +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define nCOV15II 0x0 +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define nCZEROII 0x0 +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define nCZMII 0x0 +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define nCZMEII 0x0 +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ +#define nCZMZII 0x0 + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ +#define nW1ZMONCE 0x0 + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define nFIEN 0x0 +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define nFTESTDEC 0x0 +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define nFWRTEST 0x0 +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define nFRDEN 0x0 +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ +#define nFWREN 0x0 + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define nFCOMP 0x0 +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define nFERROR 0x0 +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define nMMRGLOAD 0x0 +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define nMMRGLOCK 0x0 +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ +#define nFPGMEN 0x0 + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define nEMUDABL 0x0 +#define RSTDABL 0x2 /* Reset Disable */ +#define nRSTDABL 0x0 +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define nDMA0OVR 0x0 +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define nDMA1OVR 0x0 +#define EMUOVR 0x4000 /* Emulation Override */ +#define nEMUOVR 0x0 +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define nOTPSEN 0x0 +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define nSECURE0 0x0 +#define SECURE1 0x2 /* SECURE 1 */ +#define nSECURE1 0x0 +#define SECURE2 0x4 /* SECURE 2 */ +#define nSECURE2 0x0 +#define SECURE3 0x8 /* SECURE 3 */ +#define nSECURE3 0x0 + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define nNMI 0x0 +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define nAFVALID 0x0 +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define nAFEXIT 0x0 +#define SECSTAT 0xe0 /* Secure Status */ + +/* Bit masks for NFC_CTL */ + +#define WR_DLY 0xf /* Write Strobe Delay */ +#define RD_DLY 0xf0 /* Read Strobe Delay */ +#define NWIDTH 0x100 /* NAND Data Width */ +#define nNWIDTH 0x0 +#define PG_SIZE 0x200 /* Page Size */ +#define nPG_SIZE 0x0 + +/* Bit masks for NFC_STAT */ + +#define NBUSY 0x1 /* Not Busy */ +#define nNBUSY 0x0 +#define WB_FULL 0x2 /* Write Buffer Full */ +#define nWB_FULL 0x0 +#define PG_WR_STAT 0x4 /* Page Write Pending */ +#define nPG_WR_STAT 0x0 +#define PG_RD_STAT 0x8 /* Page Read Pending */ +#define nPG_RD_STAT 0x0 +#define WB_EMPTY 0x10 /* Write Buffer Empty */ +#define nWB_EMPTY 0x0 + +/* Bit masks for NFC_IRQSTAT */ + +#define NBUSYIRQ 0x1 /* Not Busy IRQ */ +#define nNBUSYIRQ 0x0 +#define WB_OVF 0x2 /* Write Buffer Overflow */ +#define nWB_OVF 0x0 +#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ +#define nWB_EDGE 0x0 +#define RD_RDY 0x8 /* Read Data Ready */ +#define nRD_RDY 0x0 +#define WR_DONE 0x10 /* Page Write Done */ +#define nWR_DONE 0x0 + +/* Bit masks for NFC_IRQMASK */ + +#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ +#define nMASK_BUSYIRQ 0x0 +#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ +#define nMASK_WBOVF 0x0 +#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ +#define nMASK_WBEMPTY 0x0 +#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ +#define nMASK_RDRDY 0x0 +#define MASK_WRDONE 0x10 /* Mask Write Done */ +#define nMASK_WRDONE 0x0 + +/* Bit masks for NFC_RST */ + +#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ +#define nECC_RST 0x0 + +/* Bit masks for NFC_PGCTL */ + +#define PG_RD_START 0x1 /* Page Read Start */ +#define nPG_RD_START 0x0 +#define PG_WR_START 0x2 /* Page Write Start */ +#define nPG_WR_START 0x0 + +/* Bit masks for NFC_ECC0 */ + +#define ECC0 0x7ff /* Parity Calculation Result0 */ + +/* Bit masks for NFC_ECC1 */ + +#define ECC1 0x7ff /* Parity Calculation Result1 */ + +/* Bit masks for NFC_ECC2 */ + +#define ECC2 0x7ff /* Parity Calculation Result2 */ + +/* Bit masks for NFC_ECC3 */ + +#define ECC3 0x7ff /* Parity Calculation Result3 */ + +/* Bit masks for NFC_COUNT */ + +#define ECCCNT 0x3ff /* Transfer Count */ + + +#endif /* _DEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h new file mode 100644 index 00000000000..49dd693223e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/dma.h @@ -0,0 +1,62 @@ +/* + * file: include/asm-blackfin/mach-bf527/dma.h + * based on: include/asm-blackfin/mach-bf537/dma.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system DMA map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 16 + +#define CH_PPI 0 /* PPI receive/transmit or NFC */ +#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */ +#define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */ +#define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */ +#define CH_SPORT0_RX 3 /* SPORT0 receive */ +#define CH_SPORT0_TX 4 /* SPORT0 transmit */ +#define CH_SPORT1_RX 5 /* SPORT1 receive */ +#define CH_SPORT1_TX 6 /* SPORT1 transmit */ +#define CH_SPI 7 /* SPI transmit/receive */ +#define CH_UART0_RX 8 /* UART0 receive */ +#define CH_UART0_TX 9 /* UART0 transmit */ +#define CH_UART1_RX 10 /* UART1 receive */ +#define CH_UART1_TX 11 /* UART1 transmit */ + +#define CH_MEM_STREAM0_DEST 12 /* TX */ +#define CH_MEM_STREAM0_SRC 13 /* RX */ +#define CH_MEM_STREAM1_DEST 14 /* TX */ +#define CH_MEM_STREAM1_SRC 15 /* RX */ + +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */ +#elif defined(CONFIG_BF527_NAND_D_PORTH) +#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */ +#endif + +#endif diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h new file mode 100644 index 00000000000..4e2b3f2020e --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -0,0 +1,259 @@ +/* + * file: include/asm-blackfin/mach-bf527/irq.h + * based on: include/asm-blackfin/mach-bf537/irq.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF527_IRQ_H_ +#define _BF527_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name + Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + ..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * +*/ + +#define NR_PERI_INTS (2 * 32) + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ +#define IRQ_DMAR0_BLK BFIN_IRQ(2) /* DMAR0 Block Interrupt */ +#define IRQ_DMAR1_BLK BFIN_IRQ(3) /* DMAR1 Block Interrupt */ +#define IRQ_DMAR0_OVR BFIN_IRQ(4) /* DMAR0 Overflow Error */ +#define IRQ_DMAR1_OVR BFIN_IRQ(5) /* DMAR1 Overflow Error */ +#define IRQ_PPI_ERROR BFIN_IRQ(6) /* PPI Error */ +#define IRQ_MAC_ERROR BFIN_IRQ(7) /* MAC Status */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(8) /* SPORT0 Status */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(9) /* SPORT1 Status */ +#define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */ +#define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */ +#define IRQ_RTC BFIN_IRQ(14) /* RTC */ +#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI/NAND) */ +#define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */ +#define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX) */ +#define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */ +#define IRQ_TWI BFIN_IRQ(20) /* TWI */ +#define IRQ_SPI BFIN_IRQ(21) /* DMA 7 Channel (SPI) */ +#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ +#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ +#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX/HDMA) */ +#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ +#define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ +#define IRQ_NFC BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ +#define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ +#define IRQ_TMR0 BFIN_IRQ(32) /* Timer 0 */ +#define IRQ_TMR1 BFIN_IRQ(33) /* Timer 1 */ +#define IRQ_TMR2 BFIN_IRQ(34) /* Timer 2 */ +#define IRQ_TMR3 BFIN_IRQ(35) /* Timer 3 */ +#define IRQ_TMR4 BFIN_IRQ(36) /* Timer 4 */ +#define IRQ_TMR5 BFIN_IRQ(37) /* Timer 5 */ +#define IRQ_TMR6 BFIN_IRQ(38) /* Timer 6 */ +#define IRQ_TMR7 BFIN_IRQ(39) /* Timer 7 */ +#define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */ +#define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */ +#define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */ +#define IRQ_MEM_DMA1 BFIN_IRQ(43) /* MDMA Stream 1 */ +#define IRQ_WATCH BFIN_IRQ(44) /* Software Watchdog Timer */ +#define IRQ_PORTF_INTA BFIN_IRQ(45) /* Port F Interrupt A */ +#define IRQ_PORTF_INTB BFIN_IRQ(46) /* Port F Interrupt B */ +#define IRQ_SPI_ERROR BFIN_IRQ(47) /* SPI Status */ +#define IRQ_NFC_ERROR BFIN_IRQ(48) /* NAND Error */ +#define IRQ_HDMA_ERROR BFIN_IRQ(49) /* HDMA Error */ +#define IRQ_HDMA BFIN_IRQ(50) /* HDMA (TFI) */ +#define IRQ_USB_EINT BFIN_IRQ(51) /* USB_EINT Interrupt */ +#define IRQ_USB_INT0 BFIN_IRQ(52) /* USB_INT0 Interrupt */ +#define IRQ_USB_INT1 BFIN_IRQ(53) /* USB_INT1 Interrupt */ +#define IRQ_USB_INT2 BFIN_IRQ(54) /* USB_INT2 Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(55) /* USB_DMAINT Interrupt */ + +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define IRQ_PG0 87 +#define IRQ_PG1 88 +#define IRQ_PG2 89 +#define IRQ_PG3 90 +#define IRQ_PG4 91 +#define IRQ_PG5 92 +#define IRQ_PG6 93 +#define IRQ_PG7 94 +#define IRQ_PG8 95 +#define IRQ_PG9 96 +#define IRQ_PG10 97 +#define IRQ_PG11 98 +#define IRQ_PG12 99 +#define IRQ_PG13 100 +#define IRQ_PG14 101 +#define IRQ_PG15 102 + +#define IRQ_PH0 103 +#define IRQ_PH1 104 +#define IRQ_PH2 105 +#define IRQ_PH3 106 +#define IRQ_PH4 107 +#define IRQ_PH5 108 +#define IRQ_PH6 109 +#define IRQ_PH7 110 +#define IRQ_PH8 111 +#define IRQ_PH9 112 +#define IRQ_PH10 113 +#define IRQ_PH11 114 +#define IRQ_PH12 115 +#define IRQ_PH13 116 +#define IRQ_PH14 117 +#define IRQ_PH15 118 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PH15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA0_ERROR_POS 4 +#define IRQ_DMAR0_BLK_POS 8 +#define IRQ_DMAR1_BLK_POS 12 +#define IRQ_DMAR0_OVR_POS 16 +#define IRQ_DMAR1_OVR_POS 20 +#define IRQ_PPI_ERROR_POS 24 +#define IRQ_MAC_ERROR_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_SPORT0_ERROR_POS 0 +#define IRQ_SPORT1_ERROR_POS 4 +#define IRQ_UART0_ERROR_POS 16 +#define IRQ_UART1_ERROR_POS 20 +#define IRQ_RTC_POS 24 +#define IRQ_PPI_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_SPORT0_RX_POS 0 +#define IRQ_SPORT0_TX_POS 4 +#define IRQ_SPORT1_RX_POS 8 +#define IRQ_SPORT1_TX_POS 12 +#define IRQ_TWI_POS 16 +#define IRQ_SPI_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_UART1_RX_POS 0 +#define IRQ_UART1_TX_POS 4 +#define IRQ_OPTSEC_POS 8 +#define IRQ_CNT_POS 12 +#define IRQ_MAC_RX_POS 16 +#define IRQ_PORTH_INTA_POS 20 +#define IRQ_MAC_TX_POS 24 +#define IRQ_PORTH_INTB_POS 28 + +/* IAR4 BIT FIELDS */ +#define IRQ_TMR0_POS 0 +#define IRQ_TMR1_POS 4 +#define IRQ_TMR2_POS 8 +#define IRQ_TMR3_POS 12 +#define IRQ_TMR4_POS 16 +#define IRQ_TMR5_POS 20 +#define IRQ_TMR6_POS 24 +#define IRQ_TMR7_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_PORTG_INTA_POS 0 +#define IRQ_PORTG_INTB_POS 4 +#define IRQ_MEM_DMA0_POS 8 +#define IRQ_MEM_DMA1_POS 12 +#define IRQ_WATCH_POS 16 +#define IRQ_PORTF_INTA_POS 20 +#define IRQ_PORTF_INTB_POS 24 +#define IRQ_SPI_ERROR_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_NFC_ERROR_POS 0 +#define IRQ_HDMA_ERROR_POS 4 +#define IRQ_HDMA_POS 8 +#define IRQ_USB_EINT_POS 12 +#define IRQ_USB_INT0_POS 16 +#define IRQ_USB_INT1_POS 20 +#define IRQ_USB_INT2_POS 24 +#define IRQ_USB_DMA_POS 28 + +#endif /* _BF527_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h new file mode 100644 index 00000000000..cbe03f4a569 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/mem_init.h @@ -0,0 +1,310 @@ +/* + * File: include/asm-blackfin/mach-bf527/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h new file mode 100644 index 00000000000..ef46dc991cd --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h @@ -0,0 +1,102 @@ +/* + * file: include/asm-blackfin/mach-bf527/mem_map.h + * based on: include/asm-blackfin/mach-bf537/mem_map.h + * author: Michael Hennerich (michael.hennerich@analog.com) + * + * created: + * description: + * Memory MAP Common header file for blackfin BF527/5/2 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_527_H_ +#define _MEM_MAP_527_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x8000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE */ + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_527_H_ */ diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h new file mode 100644 index 00000000000..ae4d205bfcf --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -0,0 +1,207 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) + +#if defined(CONFIG_BF527_SPORT0_PORTF) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#elif defined(CONFIG_BF527_SPORT0_PORTG) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#if defined(CONFIG_BF527_SPORT0_TSCLK_PG10) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#elif defined(CONFIG_BF527_SPORT0_TSCLK_PG14) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#endif +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#endif + +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) + +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) + +#if defined(CONFIG_BF527_UART1_PORTF) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) +#elif defined(CONFIG_BF527_UART1_PORTG) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#endif + +#define P_HWAIT (P_DONTCARE) + +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +/* #define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */ +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_MDC (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2)) + +#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) +#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) +#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) + +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) +#elif defined(CONFIG_BF527_NAND_D_PORTH) +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#endif + +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_NAND_WE (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_NAND_RE (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_NAND_CLE (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0)) +#define P_NAND_ALE (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0)) + +#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2)) +#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2)) +#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) +#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2)) +#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2)) +#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2)) +#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2)) +#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2)) +#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2)) +#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2)) +#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2)) +#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2)) +#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2)) +#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2)) + +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1)) +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_MDIO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) + +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DONTCARE) +#define P_PPI0_CLK (P_DONTCARE) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MDC, \ + P_MDIO, 0} + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_RMII0_REF_CLK, \ + P_RMII0_MDINT, \ + P_RMII0_CRS_DV, \ + P_MDC, \ + P_MDIO, 0} + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index d59db86195b..01b2b7ead5a 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h new file mode 100644 index 00000000000..8f7ea112fd3 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -0,0 +1,272 @@ +/* + * File: include/asm-blackfin/mach-bf533/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if __SILICON_REVISION__ < 3 +# error will not work on BF533 silicon version 0.0, 0.1, or 0.2 +#endif + +#if defined(__ADSPBF531__) +# define ANOMALY_BF531 1 +#else +# define ANOMALY_BF531 0 +#endif +#if defined(__ADSPBF532__) +# define ANOMALY_BF532 1 +#else +# define ANOMALY_BF532 0 +#endif +#if defined(__ADSPBF533__) +# define ANOMALY_BF533 1 +#else +# define ANOMALY_BF533 0 +#endif + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ +#define ANOMALY_05000105 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ +#define ANOMALY_05000158 (__SILICON_REVISION__ < 5) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000183 (__SILICON_REVISION__ < 4) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 4) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 4) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 4) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ +#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Specific Sequence That Can Cause DMA Error or DMA Stopping */ +#define ANOMALY_05000203 (__SILICON_REVISION__ < 4) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 4) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 4) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (1) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* SPI Slave Boot Mode Modifies Registers from Reset Value */ +#define ANOMALY_05000229 (1) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ +#define ANOMALY_05000233 (__SILICON_REVISION__ < 4) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000234 (__SILICON_REVISION__ == 4) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 4) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Data CPLBs Should Prevent Spurious Hardware Errors */ +#define ANOMALY_05000246 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ == 4) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 4) +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 5) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 5) +/* Spontaneous Reset of Internal Voltage Regulator */ +#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM Memory May Be Lost */ +#define ANOMALY_05000273 (1) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (1) +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ +#define ANOMALY_05000277 (1) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (1) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (1) +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ +#define ANOMALY_05000282 (1) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (__SILICON_REVISION__ < 5) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +#define ANOMALY_05000306 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ +#define ANOMALY_05000311 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ +#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + + +/* These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Watchpoints (Hardware Breakpoints) are not supported */ +#define ANOMALY_05000067 (__SILICON_REVISION__ < 3) +/* Reserved bits in SYSCFG register not set at power on */ +#define ANOMALY_05000109 (__SILICON_REVISION__ < 3) +/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +#define ANOMALY_05000123 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000124 (__SILICON_REVISION__ < 3) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* SPI clock polarity and phase bits incorrect during booting */ +#define ANOMALY_05000126 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL is not set on Reset */ +#define ANOMALY_05000137 (__SILICON_REVISION__ < 3) +/* SPI boot will not complete if there is a zero fill block in the loader file */ +#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000143 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* The source MDMA descriptor may stop with a DMA Error */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +#define ANOMALY_05000148 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ +#define ANOMALY_05000155 (__SILICON_REVISION__ < 3) +/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 3) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 3) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 3) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 3) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 3) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* In PPI Transmit Modes with External Frame Syncs POLC */ +#define ANOMALY_05000192 (__SILICON_REVISION__ < 3) +/* Internal Voltage Regulator may not start up */ +#define ANOMALY_05000206 (__SILICON_REVISION__ < 3) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000266 (0) +#define ANOMALY_05000323 (0) + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h new file mode 100644 index 00000000000..12a41693199 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bf533.h @@ -0,0 +1,161 @@ +/* + * File: include/asm-blackfin/mach-bf533/bf533.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF533_H__ +#define __MACH_BF533_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_BIT 0x0FFFFFFF +#define UART_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0xFF0FFFFF +#define SPI_ERROR_BIT 0xFFF0FFFF +#define SPORT0_ERROR_BIT 0xFFFF0FFF +#define PPI_ERROR_BIT 0xFFFFF0FF +#define DMA_ERROR_BIT 0xFFFFFF0F +#define PLLWAKE_ERROR_BIT 0xFFFFFFFF + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_BIT 0x0FFFFFFF +#define DMA6_UARTRX_BIT 0xF0FFFFFF +#define DMA5_SPI_BIT 0xFF0FFFFF +#define DMA4_SPORT1TX_BIT 0xFFF0FFFF +#define DMA3_SPORT1RX_BIT 0xFFFF0FFF +#define DMA2_SPORT0TX_BIT 0xFFFFF0FF +#define DMA1_SPORT0RX_BIT 0xFFFFFF0F +#define DMA0_PPI_BIT 0xFFFFFFFF + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_BIT 0x0FFFFFFF +#define MEMDMA1_BIT 0xF0FFFFFF +#define MEMDMA0_BIT 0xFF0FFFFF +#define PFB_BIT 0xFFF0FFFF +#define PFA_BIT 0xFFFF0FFF +#define TIMER2_BIT 0xFFFFF0FF +#define TIMER1_BIT 0xFFFFFF0F +#define TIMER0_BIT 0xFFFFFFFF + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF533 +#define CPU "BF533" +#define CPUID 0x027a5000 +#endif +#ifdef CONFIG_BF532 +#define CPU "BF532" +#define CPUID 0x0275A000 +#endif +#ifdef CONFIG_BF531 +#define CPU "BF531" +#define CPUID 0x027a5000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF533_H__ */ diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..ebf592b59aa --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -0,0 +1,164 @@ +/* + * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#ifdef CONFIG_BFIN_UART0_CTSRTS +# define CONFIG_SERIAL_BFIN_CTSRTS +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif +#endif + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { + { + 0xFFC00400, + IRQ_UART_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART_TX, + CH_UART_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + } +}; + +#define DRIVER_NAME "bfin-uart" + +int nr_ports = BFIN_UART_NR_PORTS; +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_input(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h new file mode 100644 index 00000000000..9bb87e9e2e9 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h @@ -0,0 +1,125 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h new file mode 100644 index 00000000000..d80971b4e3a --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -0,0 +1,60 @@ +/* + * File: include/asm-blackfin/mach-bf533/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF533_FAMILY + +#include "bf533.h" +#include "mem_map.h" +#include "defBF532.h" +#include "anomaly.h" + +#if !defined(__ASSEMBLY__) +#include "cdefBF532.h" +#endif + +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#endif /* _MACH_BLACKFIN_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h new file mode 100644 index 00000000000..3d8978a52c1 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -0,0 +1,767 @@ +/* + * File: include/asm-blackfin/mach-bf533/cdefBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF532_H +#define _CDEF_BF532_H + +#include <asm/blackfin.h> + +/*include all Core registers and bit definitions*/ +#include "defBF532.h" + +/*include core specific register pointer definitions*/ +#include <asm/cdef_LPBlackfin.h> + +#include <asm/system.h> + +/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} + +/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) + +/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) + +/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) + +/* DMA Traffic controls */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + +/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ +#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) +#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) +#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C) +#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val) +#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S) +#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val) +#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C) +#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val) +#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S) +#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val) +#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR) +#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val) +#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE) +#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val) +#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH) +#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val) +#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN) +#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val) +#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D) +#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val) +#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T) +#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val) +#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D) +#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val) +#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) +#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) + + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\ +{\ + unsigned long flags;\ + local_irq_save(flags);\ + bfin_write16(FIO_FLAG_ ## name,val);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\ +{\ + unsigned long flags;\ + unsigned short ret;\ + local_irq_save(flags);\ + ret = bfin_read16(FIO_FLAG_ ## name);\ + bfin_read_CHIPID();\ + local_irq_restore(flags);\ + return ret;\ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) + +/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) + +/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) + +/* UART Controller */ +#define bfin_read_UART_THR() bfin_read16(UART_THR) +#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) +#define bfin_read_UART_RBR() bfin_read16(UART_RBR) +#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) +#define bfin_read_UART_DLL() bfin_read16(UART_DLL) +#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) +#define bfin_read_UART_IER() bfin_read16(UART_IER) +#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) +#define bfin_read_UART_DLH() bfin_read16(UART_DLH) +#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) +#define bfin_read_UART_IIR() bfin_read16(UART_IIR) +#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) +#define bfin_read_UART_LCR() bfin_read16(UART_LCR) +#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) +#define bfin_read_UART_MCR() bfin_read16(UART_MCR) +#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) +#define bfin_read_UART_LSR() bfin_read16(UART_LSR) +#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) +/* +#define UART_MSR +*/ +#define bfin_read_UART_SCR() bfin_read16(UART_SCR) +#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) +#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) +#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) + +/* SPI Controller */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* TIMER 0, 1, 2 Registers */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) +#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val) + +/* SPORT0 Controller */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) + +/* SPORT1 Controller */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) + +/* Parallel Peripheral Interface (PPI) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) +#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS() +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) + +#endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h new file mode 100644 index 00000000000..7f4633223e6 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -0,0 +1,1266 @@ +/************************************************************************ + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + ************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_BF532_H +#define _DEF_BF532_H + +/* include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ + +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#if 0 +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#endif +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ + +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ + +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ + +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic controls */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ + +#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ + +#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ + +#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ + +#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ + +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/*********************************************************************************** */ +/* System MMR Register Bits */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x0008 /* Core clock off */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ +#if !defined(__ADSPBF538__) +/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Mask */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + + /* SIC_IAR0 Masks */ + +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Masks */ + +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Masks */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* ***************************** UART CONTROLLER MASKS ********************** */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* ********** SERIAL PORT MASKS ********************** */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ + defined(__ADSPBF533__) +# define SLEN 0x001F /*TX Word Length */ +#else +# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#endif +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* no companding */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ +#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ +/* SPORTx_MCMC1 Macros */ +#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* ********** DMA CONTROLLER MASKS *********************8 */ + +/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define DMAFLOW 0x00007000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ +#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ +#define PMAP_SPI 0x5000 /* PMAP SPI DMA */ +#define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ +#define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 +#define TIMIL1 0x0002 +#define TIMIL2 0x0004 +#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ +#define TRUN0 0x1000 +#define TRUN1 0x2000 +#define TRUN2 0x4000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* SPIx_FLG Masks */ +#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ + +/* AMGCTL Masks */ +#define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x00000000 /* All Banks Disabled */ +#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ + +/* SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + + +#endif /* _DEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h new file mode 100644 index 00000000000..bd9d5e94307 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/dma.h @@ -0,0 +1,54 @@ +/***************************************************************************** +* +* BF-533/2/1 Specific Declarations +* +****************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/dma.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 12 + +#define CH_PPI 0 +#define CH_SPORT0_RX 1 +#define CH_SPORT0_TX 2 +#define CH_SPORT1_RX 3 +#define CH_SPORT1_TX 4 +#define CH_SPI 5 +#define CH_UART_RX 6 +#define CH_UART_TX 7 +#define CH_MEM_STREAM0_DEST 8 /* TX */ +#define CH_MEM_STREAM0_SRC 9 /* RX */ +#define CH_MEM_STREAM1_DEST 10 /* TX */ +#define CH_MEM_STREAM1_SRC 11 /* RX */ + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h new file mode 100644 index 00000000000..5aa38e5da6b --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -0,0 +1,173 @@ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BF533_IRQ_H_ +#define _BF533_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + PLL Wakeup Interrupt IVG7 7 + DMA Error (generic) IVG7 8 + PPI Error Interrupt IVG7 9 + SPORT0 Error Interrupt IVG7 10 + SPORT1 Error Interrupt IVG7 11 + SPI Error Interrupt IVG7 12 + UART Error Interrupt IVG7 13 + RTC Interrupt IVG8 14 + DMA0 Interrupt (PPI) IVG8 15 + DMA1 (SPORT0 RX) IVG9 16 + DMA2 (SPORT0 TX) IVG9 17 + DMA3 (SPORT1 RX) IVG9 18 + DMA4 (SPORT1 TX) IVG9 19 + DMA5 (PPI) IVG10 20 + DMA6 (UART RX) IVG10 21 + DMA7 (UART TX) IVG10 22 + Timer0 IVG11 23 + Timer1 IVG11 24 + Timer2 IVG11 25 + PF Interrupt A IVG12 26 + PF Interrupt B IVG12 27 + DMA8/9 Interrupt IVG13 28 + DMA10/11 Interrupt IVG13 29 + Watchdog Timer IVG13 30 + + Softirq IVG14 31 + System Call -- + (lowest priority) IVG15 32 * + */ +#define SYS_IRQS 31 +#define NR_PERI_INTS 24 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /*Emulation */ +#define IRQ_RST 1 /*reset */ +#define IRQ_NMI 2 /*Non Maskable */ +#define IRQ_EVX 3 /*Exception */ +#define IRQ_UNUSED 4 /*- unused interrupt*/ +#define IRQ_HWERR 5 /*Hardware Error */ +#define IRQ_CORETMR 6 /*Core timer */ + +#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ +#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ +#define IRQ_UART_ERROR 13 /*UART Error Interrupt */ +#define IRQ_RTC 14 /*RTC Interrupt */ +#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ +#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ +#define IRQ_TMR0 23 /*Timer 0 */ +#define IRQ_TMR1 24 /*Timer 1 */ +#define IRQ_TMR2 25 /*Timer 2 */ +#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ +#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH 30 /*Watch Dog Timer */ + +#define IRQ_PF0 33 +#define IRQ_PF1 34 +#define IRQ_PF2 35 +#define IRQ_PF3 36 +#define IRQ_PF4 37 +#define IRQ_PF5 38 +#define IRQ_PF6 39 +#define IRQ_PF7 40 +#define IRQ_PF8 41 +#define IRQ_PF9 42 +#define IRQ_PF10 43 +#define IRQ_PF11 44 +#define IRQ_PF12 45 +#define IRQ_PF13 46 +#define IRQ_PF14 47 +#define IRQ_PF15 48 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PF15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_POS 28 +#define UART_ERROR_POS 24 +#define SPORT1_ERROR_POS 20 +#define SPI_ERROR_POS 16 +#define SPORT0_ERROR_POS 12 +#define PPI_ERROR_POS 8 +#define DMA_ERROR_POS 4 +#define PLLWAKE_ERROR_POS 0 + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_POS 28 +#define DMA6_UARTRX_POS 24 +#define DMA5_SPI_POS 20 +#define DMA4_SPORT1TX_POS 16 +#define DMA3_SPORT1RX_POS 12 +#define DMA2_SPORT0TX_POS 8 +#define DMA1_SPORT0RX_POS 4 +#define DMA0_PPI_POS 0 + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_POS 28 +#define MEMDMA1_POS 24 +#define MEMDMA0_POS 20 +#define PFB_POS 16 +#define PFA_POS 12 +#define TIMER2_POS 8 +#define TIMER1_POS 4 +#define TIMER0_POS 0 + +#endif /* _BF533_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h new file mode 100644 index 00000000000..ed2034bf10e --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/mem_init.h @@ -0,0 +1,297 @@ +/* + * File: include/asm-blackfin/mach-bf533/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h new file mode 100644 index 00000000000..581fc6eea78 --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h @@ -0,0 +1,171 @@ +/* + * File: include/asm-blackfin/mach-bf533/mem_map.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MEM_MAP_533_H_ +#define _MEM_MAP_533_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x400 + +/* Level 1 Memory */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF533 processors */ + +#ifdef CONFIG_BF533 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#ifdef CONFIG_BFIN_ICACHE +#define L1_CODE_LENGTH (0x14000 - 0x4000) +#else +#define L1_CODE_LENGTH 0x14000 +#endif + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF532 processors */ + +#ifdef CONFIG_BF532 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 + +#ifdef CONFIG_BFIN_ICACHE +#define L1_CODE_LENGTH (0xC000 - 0x4000) +#else +#define L1_CODE_LENGTH 0xC000 +#endif + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH (0x4000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF531 processors */ + +#ifdef CONFIG_BF531 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 +#define L1_CODE_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x0000 + + +#ifdef CONFIG_BFIN_DCACHE +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif + +#endif + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h new file mode 100644 index 00000000000..685a2651dcd --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -0,0 +1,67 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11)) +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12)) + +#define P_SPORT1_TSCLK (P_DONTCARE) +#define P_SPORT1_RSCLK (P_DONTCARE) +#define P_SPORT0_TSCLK (P_DONTCARE) +#define P_SPORT0_RSCLK (P_DONTCARE) +#define P_UART0_RX (P_DONTCARE) +#define P_UART0_TX (P_DONTCARE) +#define P_SPORT1_DRSEC (P_DONTCARE) +#define P_SPORT1_RFS (P_DONTCARE) +#define P_SPORT1_DTPRI (P_DONTCARE) +#define P_SPORT1_DTSEC (P_DONTCARE) +#define P_SPORT1_TFS (P_DONTCARE) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DONTCARE) +#define P_SPORT0_RFS (P_DONTCARE) +#define P_SPORT0_DTPRI (P_DONTCARE) +#define P_SPORT0_DTSEC (P_DONTCARE) +#define P_SPORT0_TFS (P_DONTCARE) +#define P_SPORT0_DRPRI (P_DONTCARE) + +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) + +#define P_TMR2 (P_DONTCARE) +#define P_TMR1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) + + + + + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e93964fdb43..8482d22321f 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -584,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = { #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) + +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + /* DataFlash chip */ static struct bfin5xx_spi_chip data_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ @@ -609,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { || defined(CONFIG_MTD_DATAFLASH_MODULE) { /* DataFlash chip */ .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_dataflash_data, .controller_data = &data_flash_chip_info, .mode = SPI_MODE_3, }, diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 64e0287ab26..12eb5cc571d 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h new file mode 100644 index 00000000000..8460ab9c324 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -0,0 +1,163 @@ +/* + * File: include/asm-blackfin/mach-bf537/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if __SILICON_REVISION__ < 2 +# error will not work on BF537 silicon version 0.0 or 0.1 +#endif + +#if defined(__ADSPBF534__) +# define ANOMALY_BF534 1 +#else +# define ANOMALY_BF534 0 +#endif +#if defined(__ADSPBF536__) +# define ANOMALY_BF536 1 +#else +# define ANOMALY_BF536 0 +#endif +#if defined(__ADSPBF537__) +# define ANOMALY_BF537 1 +#else +# define ANOMALY_BF537 0 +#endif + +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */ +#define ANOMALY_05000119 (1) +/* Rx.H cannot be used to access 16-bit System MMR registers */ +#define ANOMALY_05000122 (1) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ +#define ANOMALY_05000167 (1) +/* PPI_DELAY not functional in PPI modes with 0 frame syncs */ +#define ANOMALY_05000180 (1) +/* Instruction Cache Is Not Functional */ +#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) +/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* Spurious Hardware Error from an access in the shadow of a conditional branch */ +#define ANOMALY_05000245 (1) +/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +#define ANOMALY_05000247 (1) +/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ < 3) +/* EMAC Tx DMA error after an early frame abort */ +#define ANOMALY_05000252 (__SILICON_REVISION__ < 3) +/* Maximum external clock speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 3) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 2) +/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 3) +/* EMAC MDIO input latched on wrong MDC edge */ +#define ANOMALY_05000256 (__SILICON_REVISION__ < 3) +/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 3) +/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */ +#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2) +/* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ == 2) +/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) +/* Stores to data cache may be lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 3) +/* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ == 2) +/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 3) +/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */ +#define ANOMALY_05000265 (1) +/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +#define ANOMALY_05000268 (__SILICON_REVISION__ < 3) +/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 3) +/* Certain data cache write through modes fail for VDDint <=0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000273 (__SILICON_REVISION__ < 3) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +/* Disabling Peripherals with DMA running may cause DMA system instability */ +#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) +/* SPI Master boot mode does not work well with Atmel Data flash devices */ +#define ANOMALY_05000280 (1) +/* False Hardware Error Exception when ISR context is not restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 3) +/* Memory DMA corruption with 32-bit data and traffic control */ +#define ANOMALY_05000282 (__SILICON_REVISION__ < 3) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (__SILICON_REVISION__ < 3) +/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +#define ANOMALY_05000285 (__SILICON_REVISION__ < 3) +/* SPORTs may receive bad data if FIFOs fill up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 3) +/* Memory to memory DMA source/destination descriptors must be in same memory space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 3) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 3) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 3) +/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +#define ANOMALY_05000309 (__SILICON_REVISION__ < 3) +/* False hardware errors caused by fetches at the boundary of reserved memory */ +#define ANOMALY_05000310 (1) +/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */ +#define ANOMALY_05000312 (1) +/* PPI is level sensitive on first transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: collisions occur in Full Duplex mode */ +#define ANOMALY_05000316 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +#define ANOMALY_05000321 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +#define ANOMALY_05000322 (1) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) +/* New Feature: UART Remains Enabled after UART Boot */ +#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000359 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + +#endif diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h new file mode 100644 index 00000000000..cfe2a221112 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/bf537.h @@ -0,0 +1,141 @@ +/* + * File: include/asm-blackfin/mach-bf537/bf537.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF537_H__ +#define __MACH_BF537_H__ + +#define SUPPORTED_REVID 2 + +/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ + +#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ +#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ +#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ +#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ +#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#ifdef CONFIG_BF537 +#define CPU "BF537" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF536 +#define CPU "BF536" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF534 +#define CPU "BF534" +#define CPUID 0x027c6000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF537_H__ */ diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..1bf56ffa22f --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -0,0 +1,195 @@ +/* + * file: include/asm-blackfin/mach-bf537/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver header files + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +#define DRIVER_NAME "bfin-uart" + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_output(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h new file mode 100644 index 00000000000..cfd8ad4f1f2 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h @@ -0,0 +1,142 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR1 + ret = peripheral_request(P_UART1_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART1_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h new file mode 100644 index 00000000000..cffc786b2a2 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h @@ -0,0 +1,165 @@ +/* + * File: include/asm-blackfin/mach-bf537/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF537_FAMILY + +#include "bf537.h" +#include "mem_map.h" +#include "defBF534.h" +#include "anomaly.h" + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "defBF537.h" +#endif + +#if !defined(__ASSEMBLY__) +#include "cdefBF534.h" + +/* UART 0*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "cdefBF537.h" +#endif +#endif + +/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */ + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +/* DMA Channnel */ +#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() +#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) +#define CH_UART_RX CH_UART0_RX +#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX() +#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val) +#define CH_UART_TX CH_UART0_TX + +/* System Interrupt Controller */ +#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX() +#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val) +#define IRQ_UART_RX IRQ_UART0_RX +#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX() +#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val) +#define IRQ_UART_TX IRQ_UART0_TX +#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR() +#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val) +#define IRQ_UART_ERROR IRQ_UART0_ERROR + +/* MMR Registers*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define BFIN_UART_THR UART0_THR +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define BFIN_UART_RBR UART0_RBR +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define BFIN_UART_DLL UART0_DLL +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define BFIN_UART_IER UART0_IER +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define BFIN_UART_DLH UART0_DLH +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define BFIN_UART_IIR UART0_IIR +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define BFIN_UART_LCR UART0_LCR +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define BFIN_UART_MCR UART0_MCR +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define BFIN_UART_LSR UART0_LSR +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define BFIN_UART_SCR UART0_SCR +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) +#define BFIN_UART_GCTL UART0_GCTL + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h new file mode 100644 index 00000000000..88d491cd9f3 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -0,0 +1,1819 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefbf534.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF534_H +#define _CDEF_BF534_H + +#include <asm/blackfin.h> + +/* Include all Core registers and bit definitions */ +#include "defBF534.h" + +/* Include core specific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +#include <asm/system.h> + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT,val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR,val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR,val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL,val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER,val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH,val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR,val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR,val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR,val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR,val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR,val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR,val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL,val) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS,val) + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO,val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR,val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET,val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE,val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA,val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR,val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET,val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE,val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB,val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR,val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET,val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE,val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR,val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR,val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE,val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH,val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN,val) + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) + +/* DMA Traffic Control Registers */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG,val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR,val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR,val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT,val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT,val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY,val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY,val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR,val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR,val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT,val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT,val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS,val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP,val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG,val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR,val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR,val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT,val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT,val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY,val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY,val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR,val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR,val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT,val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT,val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS,val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP,val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG,val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR,val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR,val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT,val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT,val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY,val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY,val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR,val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR,val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT,val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT,val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS,val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP,val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG,val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR,val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR,val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT,val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT,val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY,val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY,val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR,val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR,val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT,val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT,val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS,val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO,val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR,val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET,val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE,val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA,val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR,val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET,val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE,val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB,val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR,val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET,val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE,val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR,val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR,val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE,val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH,val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN,val) + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO,val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR,val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET,val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE,val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA,val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR,val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET,val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE,val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB,val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR,val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET,val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE,val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR,val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR,val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE,val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH,val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN,val) + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR,val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR,val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL,val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER,val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH,val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR,val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR,val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR,val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR,val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR,val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR,val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL,val) + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) +#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1,val) +#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) +#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1,val) +#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) +#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1,val) +#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) +#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1,val) +#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) +#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1,val) +#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) +#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1,val) +#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) +#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1,val) +#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) +#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1,val) +#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) +#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1,val) +#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) +#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1,val) +#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) +#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1,val) +#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) +#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1,val) +#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) +#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1,val) + +/* For Mailboxes 16-31 */ +#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) +#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2,val) +#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) +#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2,val) +#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) +#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2,val) +#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) +#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2,val) +#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) +#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2,val) +#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) +#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2,val) +#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) +#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2,val) +#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) +#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2,val) +#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) +#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2,val) +#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) +#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2,val) +#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) +#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2,val) +#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) +#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2,val) +#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) +#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2,val) + +#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) +#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK,val) +#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) +#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING,val) +#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) +#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG,val) +#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) +#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS,val) +#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) +#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC,val) +#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) +#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS,val) +#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) +#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM,val) +#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) +#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF,val) +#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) +#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL,val) +#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) +#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR,val) +#define bfin_read_CAN_SFCMVER() bfin_read16(CAN_SFCMVER) +#define bfin_write_CAN_SFCMVER(val) bfin_write16(CAN_SFCMVER,val) +#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) +#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD,val) +#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) +#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR,val) +#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) +#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR,val) +#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) +#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG,val) +#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) +#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT,val) +#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) +#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC,val) +#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) +#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF,val) + +/* Mailbox Acceptance Masks */ +#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) +#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L,val) +#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) +#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H,val) +#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) +#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L,val) +#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) +#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H,val) +#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) +#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L,val) +#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) +#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H,val) +#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) +#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L,val) +#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) +#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H,val) +#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) +#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L,val) +#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) +#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H,val) +#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) +#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L,val) +#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) +#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H,val) +#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) +#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L,val) +#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) +#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H,val) +#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) +#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L,val) +#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) +#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H,val) +#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) +#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L,val) +#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) +#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H,val) +#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) +#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L,val) +#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) +#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H,val) +#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) +#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L,val) +#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) +#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H,val) +#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) +#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L,val) +#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) +#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H,val) +#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) +#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L,val) +#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) +#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H,val) +#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) +#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L,val) +#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) +#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H,val) +#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) +#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L,val) +#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) +#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H,val) +#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) +#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L,val) +#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) +#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H,val) + +#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) +#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L,val) +#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) +#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H,val) +#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) +#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L,val) +#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) +#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H,val) +#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) +#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L,val) +#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) +#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H,val) +#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) +#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L,val) +#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) +#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H,val) +#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) +#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L,val) +#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) +#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H,val) +#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) +#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L,val) +#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) +#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H,val) +#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) +#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L,val) +#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) +#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H,val) +#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) +#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L,val) +#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) +#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H,val) +#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) +#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L,val) +#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) +#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H,val) +#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) +#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L,val) +#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) +#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H,val) +#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) +#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L,val) +#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) +#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H,val) +#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) +#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L,val) +#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) +#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H,val) +#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) +#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L,val) +#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) +#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H,val) +#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) +#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L,val) +#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) +#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H,val) +#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) +#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L,val) +#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) +#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H,val) +#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) +#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L,val) +#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) +#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H,val) + +/* CAN Acceptance Mask Area Macros */ +#define bfin_read_CAN_AM_L(x)() bfin_read16(CAN_AM_L(x)) +#define bfin_write_CAN_AM_L(x)(val) bfin_write16(CAN_AM_L(x),val) +#define bfin_read_CAN_AM_H(x)() bfin_read16(CAN_AM_H(x)) +#define bfin_write_CAN_AM_H(x)(val) bfin_write16(CAN_AM_H(x),val) + +/* Mailbox Registers */ +#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) +#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1,val) +#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) +#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0,val) +#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) +#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP,val) +#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) +#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH,val) +#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) +#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3,val) +#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) +#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2,val) +#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) +#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1,val) +#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) +#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0,val) + +#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) +#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1,val) +#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) +#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0,val) +#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) +#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP,val) +#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) +#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH,val) +#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) +#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3,val) +#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) +#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2,val) +#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) +#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1,val) +#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) +#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0,val) + +#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) +#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1,val) +#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) +#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0,val) +#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) +#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP,val) +#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) +#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH,val) +#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) +#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3,val) +#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) +#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2,val) +#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) +#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1,val) +#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) +#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0,val) + +#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) +#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1,val) +#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) +#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0,val) +#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) +#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP,val) +#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) +#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH,val) +#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) +#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3,val) +#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) +#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2,val) +#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) +#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1,val) +#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) +#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0,val) + +#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) +#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1,val) +#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) +#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0,val) +#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) +#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP,val) +#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) +#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH,val) +#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) +#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3,val) +#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) +#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2,val) +#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) +#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1,val) +#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) +#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0,val) + +#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) +#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1,val) +#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) +#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0,val) +#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) +#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP,val) +#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) +#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH,val) +#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) +#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3,val) +#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) +#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2,val) +#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) +#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1,val) +#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) +#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0,val) + +#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) +#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1,val) +#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) +#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0,val) +#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) +#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP,val) +#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) +#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH,val) +#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) +#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3,val) +#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) +#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2,val) +#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) +#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1,val) +#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) +#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0,val) + +#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) +#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1,val) +#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) +#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0,val) +#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) +#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP,val) +#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) +#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH,val) +#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) +#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3,val) +#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) +#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2,val) +#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) +#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1,val) +#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) +#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0,val) + +#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) +#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1,val) +#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) +#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0,val) +#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) +#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP,val) +#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) +#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH,val) +#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) +#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3,val) +#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) +#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2,val) +#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) +#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1,val) +#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) +#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0,val) + +#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) +#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1,val) +#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) +#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0,val) +#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) +#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP,val) +#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) +#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH,val) +#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) +#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3,val) +#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) +#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2,val) +#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) +#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1,val) +#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) +#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0,val) + +#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) +#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1,val) +#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) +#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0,val) +#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) +#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP,val) +#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) +#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH,val) +#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) +#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3,val) +#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) +#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2,val) +#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) +#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1,val) +#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) +#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0,val) + +#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) +#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1,val) +#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) +#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0,val) +#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) +#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP,val) +#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) +#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH,val) +#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) +#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3,val) +#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) +#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2,val) +#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) +#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1,val) +#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) +#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0,val) + +#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) +#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1,val) +#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) +#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0,val) +#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) +#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP,val) +#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) +#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH,val) +#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) +#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3,val) +#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) +#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2,val) +#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) +#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1,val) +#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) +#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0,val) + +#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) +#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1,val) +#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) +#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0,val) +#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) +#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP,val) +#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) +#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH,val) +#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) +#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3,val) +#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) +#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2,val) +#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) +#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1,val) +#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) +#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0,val) + +#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) +#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1,val) +#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) +#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0,val) +#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) +#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP,val) +#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) +#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH,val) +#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) +#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3,val) +#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) +#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2,val) +#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) +#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1,val) +#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) +#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0,val) + +#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) +#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1,val) +#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) +#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0,val) +#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) +#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP,val) +#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) +#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH,val) +#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) +#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3,val) +#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) +#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2,val) +#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) +#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1,val) +#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) +#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0,val) + +#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) +#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1,val) +#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) +#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0,val) +#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) +#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP,val) +#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) +#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH,val) +#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) +#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3,val) +#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) +#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2,val) +#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) +#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1,val) +#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) +#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0,val) + +#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) +#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1,val) +#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) +#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0,val) +#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) +#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP,val) +#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) +#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH,val) +#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) +#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3,val) +#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) +#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2,val) +#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) +#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1,val) +#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) +#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0,val) + +#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) +#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1,val) +#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) +#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0,val) +#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) +#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP,val) +#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) +#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH,val) +#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) +#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3,val) +#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) +#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2,val) +#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) +#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1,val) +#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) +#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0,val) + +#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) +#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1,val) +#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) +#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0,val) +#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) +#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP,val) +#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) +#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH,val) +#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) +#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3,val) +#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) +#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2,val) +#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) +#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1,val) +#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) +#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0,val) + +#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) +#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1,val) +#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) +#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0,val) +#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) +#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP,val) +#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) +#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH,val) +#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) +#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3,val) +#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) +#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2,val) +#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) +#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1,val) +#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) +#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0,val) + +#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) +#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1,val) +#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) +#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0,val) +#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) +#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP,val) +#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) +#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH,val) +#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) +#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3,val) +#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) +#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2,val) +#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) +#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1,val) +#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) +#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0,val) + +#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) +#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1,val) +#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) +#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0,val) +#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) +#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP,val) +#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) +#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH,val) +#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) +#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3,val) +#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) +#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2,val) +#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) +#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1,val) +#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) +#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0,val) + +#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) +#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1,val) +#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) +#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0,val) +#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) +#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP,val) +#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) +#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH,val) +#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) +#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3,val) +#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) +#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2,val) +#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) +#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1,val) +#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) +#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0,val) + +#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) +#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1,val) +#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) +#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0,val) +#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) +#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP,val) +#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) +#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH,val) +#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) +#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3,val) +#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) +#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2,val) +#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) +#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1,val) +#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) +#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0,val) + +#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) +#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1,val) +#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) +#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0,val) +#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) +#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP,val) +#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) +#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH,val) +#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) +#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3,val) +#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) +#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2,val) +#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) +#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1,val) +#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) +#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0,val) + +#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) +#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1,val) +#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) +#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0,val) +#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) +#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP,val) +#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) +#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH,val) +#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) +#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3,val) +#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) +#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2,val) +#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) +#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1,val) +#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) +#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0,val) + +#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) +#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1,val) +#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) +#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0,val) +#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) +#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP,val) +#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) +#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH,val) +#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) +#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3,val) +#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) +#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2,val) +#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) +#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1,val) +#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) +#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0,val) + +#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) +#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1,val) +#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) +#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0,val) +#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) +#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP,val) +#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) +#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH,val) +#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) +#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3,val) +#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) +#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2,val) +#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) +#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1,val) +#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) +#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0,val) + +#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) +#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1,val) +#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) +#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0,val) +#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) +#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP,val) +#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) +#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH,val) +#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) +#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3,val) +#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) +#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2,val) +#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) +#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1,val) +#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) +#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0,val) + +#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) +#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1,val) +#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) +#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0,val) +#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) +#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP,val) +#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) +#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH,val) +#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) +#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3,val) +#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) +#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2,val) +#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) +#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1,val) +#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) +#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0,val) + +#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) +#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1,val) +#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) +#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0,val) +#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) +#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP,val) +#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) +#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH,val) +#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) +#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3,val) +#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) +#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2,val) +#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) +#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1,val) +#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) +#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0,val) + +/* CAN Mailbox Area Macros */ +#define bfin_read_CAN_MB_ID1(x)() bfin_read16(CAN_MB_ID1(x)) +#define bfin_write_CAN_MB_ID1(x)(val) bfin_write16(CAN_MB_ID1(x),val) +#define bfin_read_CAN_MB_ID0(x)() bfin_read16(CAN_MB_ID0(x)) +#define bfin_write_CAN_MB_ID0(x)(val) bfin_write16(CAN_MB_ID0(x),val) +#define bfin_read_CAN_MB_TIMESTAMP(x)() bfin_read16(CAN_MB_TIMESTAMP(x)) +#define bfin_write_CAN_MB_TIMESTAMP(x)(val) bfin_write16(CAN_MB_TIMESTAMP(x),val) +#define bfin_read_CAN_MB_LENGTH(x)() bfin_read16(CAN_MB_LENGTH(x)) +#define bfin_write_CAN_MB_LENGTH(x)(val) bfin_write16(CAN_MB_LENGTH(x),val) +#define bfin_read_CAN_MB_DATA3(x)() bfin_read16(CAN_MB_DATA3(x)) +#define bfin_write_CAN_MB_DATA3(x)(val) bfin_write16(CAN_MB_DATA3(x),val) +#define bfin_read_CAN_MB_DATA2(x)() bfin_read16(CAN_MB_DATA2(x)) +#define bfin_write_CAN_MB_DATA2(x)(val) bfin_write16(CAN_MB_DATA2(x),val) +#define bfin_read_CAN_MB_DATA1(x)() bfin_read16(CAN_MB_DATA1(x)) +#define bfin_write_CAN_MB_DATA1(x)(val) bfin_write16(CAN_MB_DATA1(x),val) +#define bfin_read_CAN_MB_DATA0(x)() bfin_read16(CAN_MB_DATA0(x)) +#define bfin_write_CAN_MB_DATA0(x)(val) bfin_write16(CAN_MB_DATA0(x),val) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER,val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER,val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER,val) +#define bfin_read_PORT_MUX() bfin_read16(BFIN_PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(BFIN_PORT_MUX,val) + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL,val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT,val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT,val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT,val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW,val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT,val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT,val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL,val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT,val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT,val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT,val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW,val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT,val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT,val) + +#endif /* _CDEF_BF534_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h new file mode 100644 index 00000000000..b8fc949a991 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h @@ -0,0 +1,206 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefBF537.h + * Based on: + * Author: + * + * Created: + * Description: + * System MMR Register Map + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF537_H +#define _CDEF_BF537_H + +/* Include MMRs Common to BF534 */ +#include "cdefBF534.h" + +/* Include all Core registers and bit definitions */ +#include "defBF537.h" + +/* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE,val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO,val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI,val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO,val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI,val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD,val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT,val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC,val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1,val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2,val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL,val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0,val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1,val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2,val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3,val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD,val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF,val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0,val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1,val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL,val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT,val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT,val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY,val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE,val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT,val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY,val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE,val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL,val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS,val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE,val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS,val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE,val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK,val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS,val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN,val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET,val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF,val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST,val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI,val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD,val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI,val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO,val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG,val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL,val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE,val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE,val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM,val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT,val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED,val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT,val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64,val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128,val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256,val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512,val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024,val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024,val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK,val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL,val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL,val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET,val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER,val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL,val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL,val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND,val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR,val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST,val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI,val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD,val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR,val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL,val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM,val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT,val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64,val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128,val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256,val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512,val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024,val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024,val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT,val) + +#endif /* _CDEF_BF537_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h new file mode 100644 index 00000000000..a3227f9003f --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -0,0 +1,2527 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefBF537.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF534_H +#define _DEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/************************************************************************************ +** System MMR Register Map +*************************************************************************************/ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic Control Registers */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI0_REGBASE 0xFFC01400 +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */ + +/* For Mailboxes 16-31 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */ + +/* CAN Configuration, Control, and Status Registers */ +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ +#define CAN_DEBUG 0xFFC02A88 /* Debug Register */ +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ + +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ + +/* Mailbox Acceptance Masks */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ + +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ + +/* CAN Acceptance Mask Macros */ +#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) +#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) + +/* Mailbox Registers */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ + +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ + +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ + +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ + +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ + +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ + +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ + +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ + +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ + +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ + +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ + +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ + +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ + +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ + +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ + +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ + +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ + +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ + +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ + +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ + +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ + +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ + +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ + +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ + +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ + +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ + +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ + +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ + +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ + +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ + +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ + +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ + +/* CAN Mailbox Area Macros */ +#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) +#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) +#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) +#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) +#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) +#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) +#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) +#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ + +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + +/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ +#define MBRIF MBRIRQ /* legacy */ +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ +#define MBTIF MBTIRQ /* legacy */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW +#endif /* _DEF_BF534_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h new file mode 100644 index 00000000000..3d6c83e31b1 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h @@ -0,0 +1,405 @@ +/* + * file: include/asm-blackfin/mach-bf537/defbf537.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _DEF_BF537_H +#define _DEF_BF537_H + +/* Include all Core registers and bit definitions*/ +#include <asm/cdef_LPBlackfin.h> + +/* Include all MMR and bit defines common to BF534 */ +#include "defBF534.h" + +/************************************************************************************ +** Define EMAC Section Unique to BF536/BF537 +*************************************************************************************/ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ +/* EMAC_OPMODE Masks */ +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +#endif /* _DEF_BF537_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h new file mode 100644 index 00000000000..7a964040870 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/dma.h @@ -0,0 +1,55 @@ +/* + * file: include/asm-blackfin/mach-bf537/dma.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 16 + +#define CH_PPI 0 +#define CH_EMAC_RX 1 +#define CH_EMAC_TX 2 +#define CH_SPORT0_RX 3 +#define CH_SPORT0_TX 4 +#define CH_SPORT1_RX 5 +#define CH_SPORT1_TX 6 +#define CH_SPI 7 +#define CH_UART0_RX 8 +#define CH_UART0_TX 9 +#define CH_UART1_RX 10 +#define CH_UART1_TX 11 + +#define CH_MEM_STREAM0_DEST 12 /* TX */ +#define CH_MEM_STREAM0_SRC 13 /* RX */ +#define CH_MEM_STREAM1_DEST 14 /* TX */ +#define CH_MEM_STREAM1_SRC 15 /* RX */ + +#endif diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h new file mode 100644 index 00000000000..2e68a8a1e73 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/irq.h @@ -0,0 +1,214 @@ +/* + * file: include/asm-blackfin/mach-bf537/irq.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF537_IRQ_H_ +#define _BF537_IRQ_H_ + +/* + * Interrupt source definitions + * Event Source Core Event Name + * Core Emulation ** + * Events (highest priority) EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * ..... + * + * Softirq IVG14 + * System Call -- + * (lowest priority) IVG15 + */ + +#define SYS_IRQS 39 +#define NR_PERI_INTS 32 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /*Emulation */ +#define IRQ_RST 1 /*reset */ +#define IRQ_NMI 2 /*Non Maskable */ +#define IRQ_EVX 3 /*Exception */ +#define IRQ_UNUSED 4 /*- unused interrupt*/ +#define IRQ_HWERR 5 /*Hardware Error */ +#define IRQ_CORETMR 6 /*Core timer */ + +#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ +#define IRQ_GENERIC_ERROR 9 /*GENERIC Error Interrupt */ +#define IRQ_RTC 10 /*RTC Interrupt */ +#define IRQ_PPI 11 /*DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX 12 /*DMA3 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX 13 /*DMA4 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX 14 /*DMA5 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX 15 /*DMA6 Interrupt (SPORT1 TX) */ +#define IRQ_TWI 16 /*TWI Interrupt */ +#define IRQ_SPI 17 /*DMA7 Interrupt (SPI) */ +#define IRQ_UART0_RX 18 /*DMA8 Interrupt (UART0 RX) */ +#define IRQ_UART0_TX 19 /*DMA9 Interrupt (UART0 TX) */ +#define IRQ_UART1_RX 20 /*DMA10 Interrupt (UART1 RX) */ +#define IRQ_UART1_TX 21 /*DMA11 Interrupt (UART1 TX) */ +#define IRQ_CAN_RX 22 /*CAN Receive Interrupt */ +#define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */ +#define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */ +#define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */ +#define IRQ_TMR0 26 /*Timer 0 */ +#define IRQ_TMR1 27 /*Timer 1 */ +#define IRQ_TMR2 28 /*Timer 2 */ +#define IRQ_TMR3 29 /*Timer 3 */ +#define IRQ_TMR4 30 /*Timer 4 */ +#define IRQ_TMR5 31 /*Timer 5 */ +#define IRQ_TMR6 32 /*Timer 6 */ +#define IRQ_TMR7 33 /*Timer 7 */ +#define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */ +#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ +#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */ +#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ +#define IRQ_WATCH 38 /*Watch Dog Timer */ + +#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */ +#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */ +#define IRQ_MAC_ERROR 44 /*PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */ +#define IRQ_UART0_ERROR 48 /*UART Error Interrupt */ +#define IRQ_UART1_ERROR 49 /*UART Error Interrupt */ + +#define IRQ_PF0 50 +#define IRQ_PF1 51 +#define IRQ_PF2 52 +#define IRQ_PF3 53 +#define IRQ_PF4 54 +#define IRQ_PF5 55 +#define IRQ_PF6 56 +#define IRQ_PF7 57 +#define IRQ_PF8 58 +#define IRQ_PF9 59 +#define IRQ_PF10 60 +#define IRQ_PF11 61 +#define IRQ_PF12 62 +#define IRQ_PF13 63 +#define IRQ_PF14 64 +#define IRQ_PF15 65 + +#define IRQ_PG0 66 +#define IRQ_PG1 67 +#define IRQ_PG2 68 +#define IRQ_PG3 69 +#define IRQ_PG4 70 +#define IRQ_PG5 71 +#define IRQ_PG6 72 +#define IRQ_PG7 73 +#define IRQ_PG8 74 +#define IRQ_PG9 75 +#define IRQ_PG10 76 +#define IRQ_PG11 77 +#define IRQ_PG12 78 +#define IRQ_PG13 79 +#define IRQ_PG14 80 +#define IRQ_PG15 81 + +#define IRQ_PH0 82 +#define IRQ_PH1 83 +#define IRQ_PH2 84 +#define IRQ_PH3 85 +#define IRQ_PH4 86 +#define IRQ_PH5 87 +#define IRQ_PH6 88 +#define IRQ_PH7 89 +#define IRQ_PH8 90 +#define IRQ_PH9 91 +#define IRQ_PH10 92 +#define IRQ_PH11 93 +#define IRQ_PH12 94 +#define IRQ_PH13 95 +#define IRQ_PH14 96 +#define IRQ_PH15 97 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PH15+1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA_ERROR_POS 4 +#define IRQ_ERROR_POS 8 +#define IRQ_RTC_POS 12 +#define IRQ_PPI_POS 16 +#define IRQ_SPORT0_RX_POS 20 +#define IRQ_SPORT0_TX_POS 24 +#define IRQ_SPORT1_RX_POS 28 + +/* IAR1 BIT FIELDS*/ +#define IRQ_SPORT1_TX_POS 0 +#define IRQ_TWI_POS 4 +#define IRQ_SPI_POS 8 +#define IRQ_UART0_RX_POS 12 +#define IRQ_UART0_TX_POS 16 +#define IRQ_UART1_RX_POS 20 +#define IRQ_UART1_TX_POS 24 +#define IRQ_CAN_RX_POS 28 + +/* IAR2 BIT FIELDS*/ +#define IRQ_CAN_TX_POS 0 +#define IRQ_MAC_RX_POS 4 +#define IRQ_MAC_TX_POS 8 +#define IRQ_TMR0_POS 12 +#define IRQ_TMR1_POS 16 +#define IRQ_TMR2_POS 20 +#define IRQ_TMR3_POS 24 +#define IRQ_TMR4_POS 28 + +/* IAR3 BIT FIELDS*/ +#define IRQ_TMR5_POS 0 +#define IRQ_TMR6_POS 4 +#define IRQ_TMR7_POS 8 +#define IRQ_PROG_INTA_POS 12 +#define IRQ_PORTG_INTB_POS 16 +#define IRQ_MEM_DMA0_POS 20 +#define IRQ_MEM_DMA1_POS 24 +#define IRQ_WATCH_POS 28 + +#endif /* _BF537_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h new file mode 100644 index 00000000000..f67698f670c --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/mem_init.h @@ -0,0 +1,303 @@ +/* + * File: include/asm-blackfin/mach-bf537/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h new file mode 100644 index 00000000000..5078b669431 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h @@ -0,0 +1,179 @@ +/* + * file: include/asm-blackfin/mach-bf537/mem_map.h + * based on: + * author: + * + * created: + * description: + * Memory MAP Common header file for blackfin BF537/6/4 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_537_H_ +#define _MEM_MAP_537_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x800 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF537 processors */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + + +#ifdef CONFIG_BF537 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + +#endif /*CONFIG_BF537*/ + +/* Memory Map for ADSP-BF536 processors */ + +#ifdef CONFIG_BF536 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 + +#define L1_CODE_LENGTH 0xC000 + + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH (0x4000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x4000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + +#endif + +/* Memory Map for ADSP-BF534 processors */ + +#ifdef CONFIG_BF534 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + +#endif + +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_537_H_ */ diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h new file mode 100644 index 00000000000..78fee6e0f23 --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -0,0 +1,144 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ + +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0)) +#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1)) + +#define PORT_PJ0 (GPIO_PH15 + 1) +#define PORT_PJ1 (GPIO_PH15 + 2) +#define PORT_PJ2 (GPIO_PH15 + 3) +#define PORT_PJ3 (GPIO_PH15 + 4) +#define PORT_PJ4 (GPIO_PH15 + 5) +#define PORT_PJ5 (GPIO_PH15 + 6) +#define PORT_PJ6 (GPIO_PH15 + 7) +#define PORT_PJ7 (GPIO_PH15 + 8) +#define PORT_PJ8 (GPIO_PH15 + 9) +#define PORT_PJ9 (GPIO_PH15 + 10) +#define PORT_PJ10 (GPIO_PH15 + 11) +#define PORT_PJ11 (GPIO_PH15 + 12) + +#define P_MDC (P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0)) +#define P_MDIO (P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0)) +#define P_TWI0_SCL (P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0)) +#define P_TWI0_SDA (P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1)) +#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2)) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MDC, \ + P_MDIO, 0} + + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_RMII0_REF_CLK, \ + P_RMII0_MDINT, \ + P_RMII0_CRS_DV, \ + P_MDC, \ + P_MDIO, 0} +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 58abbed0a22..ce934ee174e 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -45,7 +45,7 @@ #include <asm/gpio.h> #include <asm/nand.h> #include <asm/portmux.h> -#include <asm/mach/bf54x_keys.h> +#include <mach/bf54x_keys.h> #include <asm/dpmc.h> #include <linux/input.h> #include <linux/spi/ad7877.h> @@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548"; #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) -#include <asm/mach/bf54x-lq043.h> +#include <mach/bf54x-lq043.h> static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { .width = 480, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 0d6333ada1d..39357693046 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -48,7 +48,7 @@ #include <asm/nand.h> #include <asm/dpmc.h> #include <asm/portmux.h> -#include <asm/mach/bf54x_keys.h> +#include <mach/bf54x_keys.h> #include <linux/input.h> #include <linux/spi/ad7877.h> @@ -106,7 +106,7 @@ arch_initcall(bfin_isp1761_init); #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) -#include <asm/mach/bf54x-lq043.h> +#include <mach/bf54x-lq043.h> static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { .width = 480, diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index e3000f70a26..4d5cfeacb12 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h new file mode 100644 index 00000000000..3ad59655881 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -0,0 +1,100 @@ +/* + * File: include/asm-blackfin/mach-bf548/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2007 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* False Hardware Error Exception when ISR context is not restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) +/* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) +/* External FIFO Boot Mode Is Not Functional */ +#define ANOMALY_05000325 (__SILICON_REVISION__ < 1) +/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ +#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) +/* Synchronous Burst Flash Boot Mode Is Not Functional */ +#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) +/* Host DMA Boot Mode Is Not Functional */ +#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) +/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ +#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) +/* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) +/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ +#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) +/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) +/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ +#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) +/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ +#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) +/* USB Calibration Value Is Not Intialized */ +#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) +/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) +/* Data Lost when Core Reads SDH Data FIFO */ +#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) +/* PLL Status Register Is Inaccurate */ +#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* External Memory Read Access Hangs Core With PLL Bypass */ +#define ANOMALY_05000360 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000365 (1) +/* Addressing Conflict between Boot ROM and Asynchronous Memory */ +#define ANOMALY_05000369 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Mobile DDR Operation Not Functional */ +#define ANOMALY_05000377 (1) +/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ +#define ANOMALY_05000378 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + +#endif diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h new file mode 100644 index 00000000000..e748588e893 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -0,0 +1,127 @@ +/* + * File: include/asm-blackfin/mach-bf548/bf548.h + * Based on: + * Author: + * + * Created: + * Description: System MMR register and memory map for ADSP-BF548 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF548_H__ +#define __MACH_BF548_H__ + +#define SUPPORTED_REVID 0 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN) + +#if defined(CONFIG_BF542) +# define CPU "BF542" +# define CPUID 0x027c8000 +#elif defined(CONFIG_BF544) +# define CPU "BF544" +# define CPUID 0x027c8000 +#elif defined(CONFIG_BF547) +# define CPU "BF547" +#elif defined(CONFIG_BF548) +# define CPU "BF548" +# define CPUID 0x027c6000 +#elif defined(CONFIG_BF549) +# define CPU "BF549" +#else +# define CPU "UNKNOWN" +# define CPUID 0x0 +#endif + +#endif /* __MACH_BF48_H__ */ diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h new file mode 100644 index 00000000000..9c7ca62a45e --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h @@ -0,0 +1,30 @@ +#ifndef BF54X_LQ043_H +#define BF54X_LQ043_H + +struct bfin_bf54xfb_val { + unsigned int defval; + unsigned int min; + unsigned int max; +}; + +struct bfin_bf54xfb_mach_info { + unsigned char fixed_syncs; /* do not update sync/border */ + + /* LCD types */ + int type; + + /* Screen size */ + int width; + int height; + + /* Screen info */ + struct bfin_bf54xfb_val xres; + struct bfin_bf54xfb_val yres; + struct bfin_bf54xfb_val bpp; + + /* GPIOs */ + unsigned short disp; + +}; + +#endif /* BF54X_LQ043_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h new file mode 100644 index 00000000000..1fb4ec77cc2 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h @@ -0,0 +1,17 @@ +#ifndef _BFIN_KPAD_H +#define _BFIN_KPAD_H + +struct bfin_kpad_platform_data { + int rows; + int cols; + const unsigned int *keymap; + unsigned short keymapsize; + unsigned short repeat; + u32 debounce_time; /* in ns */ + u32 coldrive_time; /* in ns */ + u32 keyup_test_interval; /* in ms */ +}; + +#define KEYVAL(col, row, val) (((1 << col) << 24) | ((1 << row) << 16) | (val)) + +#endif diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..5e29446a8e0 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -0,0 +1,220 @@ +/* + * file: include/asm-blackfin/mach-bf548/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER_SET)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) +#define UART_GET_MSR(uart) bfin_read16(((uart)->port.membase + OFFSET_MSR)) +#define UART_GET_MCR(uart) bfin_read16(((uart)->port.membase + OFFSET_MCR)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v) +#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) + +#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ + +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) +#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + { + 0xFFC02100, + IRQ_UART2_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART2_TX, + CH_UART2_RX, +#endif +#ifdef CONFIG_BFIN_UART2_CTSRTS + CONFIG_UART2_CTS_PIN, + CONFIG_UART2_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + { + 0xFFC03100, + IRQ_UART3_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART3_TX, + CH_UART3_RX, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +#define DRIVER_NAME "bfin-uart" + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); + +#ifdef CONFIG_BFIN_UART1_CTSRTS + peripheral_request(P_UART1_RTS, DRIVER_NAME); + peripheral_request(P_UART1_CTS, DRIVER_NAME); +#endif +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART2 + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART3 + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); + +#ifdef CONFIG_BFIN_UART3_CTSRTS + peripheral_request(P_UART3_RTS, DRIVER_NAME); + peripheral_request(P_UART3_CTS, DRIVER_NAME); +#endif +#endif + SSYNC(); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_output(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h new file mode 100644 index 00000000000..c41f9cf0026 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h @@ -0,0 +1,166 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v) +#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + 0xFFC02100, + IRQ_UART2_RX, + CH_UART2_RX, + CH_UART2_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + 0xFFC03100, + IRQ_UART3_RX, + CH_UART3_RX, + CH_UART3_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR1 + ret = peripheral_request(P_UART1_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART1_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR2 + ret = peripheral_request(P_UART2_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART2_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + +#ifdef CONFIG_BFIN_SIR3 + ret = peripheral_request(P_UART3_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART3_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h new file mode 100644 index 00000000000..d6ee74ac046 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h @@ -0,0 +1,190 @@ +/* + * File: include/asm-blackfin/mach-bf548/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF548_FAMILY + +#include "bf548.h" +#include "mem_map.h" +#include "anomaly.h" + +#ifdef CONFIG_BF542 +#include "defBF542.h" +#endif + +#ifdef CONFIG_BF544 +#include "defBF544.h" +#endif + +#ifdef CONFIG_BF547 +#include "defBF547.h" +#endif + +#ifdef CONFIG_BF548 +#include "defBF548.h" +#endif + +#ifdef CONFIG_BF549 +#include "defBF549.h" +#endif + +#if !defined(__ASSEMBLY__) +#ifdef CONFIG_BF542 +#include "cdefBF542.h" +#endif +#ifdef CONFIG_BF544 +#include "cdefBF544.h" +#endif +#ifdef CONFIG_BF547 +#include "cdefBF547.h" +#endif +#ifdef CONFIG_BF548 +#include "cdefBF548.h" +#endif +#ifdef CONFIG_BF549 +#include "cdefBF549.h" +#endif + +/* UART 1*/ +#define bfin_read_UART_THR() bfin_read_UART1_THR() +#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART1_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART1_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART1_IER() +#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART1_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART1_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART1_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART1_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART1_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART1_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) + +#endif + +/* MAP used DEFINES from BF533 to BF54x - so we don't need to change + * them in the driver, kernel, etc. */ + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +/* UART 0*/ + +/* DMA Channnel */ +#define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX() +#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val) +#define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX() +#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART1_TX(val) +#define CH_UART_RX CH_UART1_RX +#define CH_UART_TX CH_UART1_TX + +/* System Interrupt Controller */ +#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART1_RX() +#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART1_RX(val) +#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART1_TX() +#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART1_TX(val) +#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART1_ERROR() +#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val) +#define IRQ_UART_RX IRQ_UART1_RX +#define IRQ_UART_TX IRQ_UART1_TX +#define IRQ_UART_ERROR IRQ_UART1_ERROR + +/* MMR Registers*/ +#define bfin_read_UART_THR() bfin_read_UART1_THR() +#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART1_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART1_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART1_IER() +#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART1_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART1_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART1_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART1_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART1_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART1_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) + +#define BFIN_UART_THR UART1_THR +#define BFIN_UART_RBR UART1_RBR +#define BFIN_UART_DLL UART1_DLL +#define BFIN_UART_IER UART1_IER +#define BFIN_UART_DLH UART1_DLH +#define BFIN_UART_IIR UART1_IIR +#define BFIN_UART_LCR UART1_LCR +#define BFIN_UART_MCR UART1_MCR +#define BFIN_UART_LSR UART1_LSR +#define BFIN_UART_SCR UART1_SCR +#define BFIN_UART_GCTL UART1_GCTL + +#define BFIN_UART_NR_PORTS 4 + +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_GCTL 0x08 /* Global Control Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ +#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ +#define OFFSET_THR 0x28 /* Transmit Holding register */ +#define OFFSET_RBR 0x2C /* Receive Buffer register */ + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h new file mode 100644 index 00000000000..07aefb9ed79 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h @@ -0,0 +1,590 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF542.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF542_H +#define _CDEF_BF542_H + +/* include all Core registers and bit definitions */ +#include "defBF542.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF542 that are not in the common header */ + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +#endif /* _CDEF_BF542_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h new file mode 100644 index 00000000000..431a6927899 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h @@ -0,0 +1,945 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF544.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF544_H +#define _CDEF_BF544_H + +/* include all Core registers and bit definitions */ +#include "defBF544.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF544 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* Two Wire Interface Registers (TWI1) */ + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF544_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h new file mode 100644 index 00000000000..93376e90dfc --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h @@ -0,0 +1,832 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF547.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF548_H +#define _CDEF_BF548_H + +/* include all Core registers and bit definitions */ +#include "defBF548.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* SPORT0 Registers */ + +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* UART2 Registers */ + +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) +#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) +#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) +#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) +#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) + +/* Two Wire Interface Registers (TWI1) */ + +/* SPI2 Registers */ + +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h new file mode 100644 index 00000000000..9cd74384136 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h @@ -0,0 +1,1577 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF548.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF548_H +#define _CDEF_BF548_H + +/* include all Core registers and bit definitions */ +#include "defBF548.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* SPORT0 Registers */ + +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* UART2 Registers */ + +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) +#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) +#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) +#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) +#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) + +/* Two Wire Interface Registers (TWI1) */ + +/* SPI2 Registers */ + +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h new file mode 100644 index 00000000000..ead360b69de --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h @@ -0,0 +1,1863 @@ +/* + * File: include/asm-blackfin/mach-bf549/cdefBF549.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF549_H +#define _CDEF_BF549_H + +/* include all Core registers and bit definitions */ +#include "defBF549.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* SPORT0 Registers */ + +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* UART2 Registers */ + +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) +#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) +#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) +#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) +#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) + +/* Two Wire Interface Registers (TWI1) */ + +/* SPI2 Registers */ + +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) + +/* MXVR Registers */ + +#define bfin_read_MXVR_CONFIG() bfin_read16(MXVR_CONFIG) +#define bfin_write_MXVR_CONFIG(val) bfin_write16(MXVR_CONFIG, val) +#define bfin_read_MXVR_STATE_0() bfin_read32(MXVR_STATE_0) +#define bfin_write_MXVR_STATE_0(val) bfin_write32(MXVR_STATE_0, val) +#define bfin_read_MXVR_STATE_1() bfin_read32(MXVR_STATE_1) +#define bfin_write_MXVR_STATE_1(val) bfin_write32(MXVR_STATE_1, val) +#define bfin_read_MXVR_INT_STAT_0() bfin_read32(MXVR_INT_STAT_0) +#define bfin_write_MXVR_INT_STAT_0(val) bfin_write32(MXVR_INT_STAT_0, val) +#define bfin_read_MXVR_INT_STAT_1() bfin_read32(MXVR_INT_STAT_1) +#define bfin_write_MXVR_INT_STAT_1(val) bfin_write32(MXVR_INT_STAT_1, val) +#define bfin_read_MXVR_INT_EN_0() bfin_read32(MXVR_INT_EN_0) +#define bfin_write_MXVR_INT_EN_0(val) bfin_write32(MXVR_INT_EN_0, val) +#define bfin_read_MXVR_INT_EN_1() bfin_read32(MXVR_INT_EN_1) +#define bfin_write_MXVR_INT_EN_1(val) bfin_write32(MXVR_INT_EN_1, val) +#define bfin_read_MXVR_POSITION() bfin_read16(MXVR_POSITION) +#define bfin_write_MXVR_POSITION(val) bfin_write16(MXVR_POSITION, val) +#define bfin_read_MXVR_MAX_POSITION() bfin_read16(MXVR_MAX_POSITION) +#define bfin_write_MXVR_MAX_POSITION(val) bfin_write16(MXVR_MAX_POSITION, val) +#define bfin_read_MXVR_DELAY() bfin_read16(MXVR_DELAY) +#define bfin_write_MXVR_DELAY(val) bfin_write16(MXVR_DELAY, val) +#define bfin_read_MXVR_MAX_DELAY() bfin_read16(MXVR_MAX_DELAY) +#define bfin_write_MXVR_MAX_DELAY(val) bfin_write16(MXVR_MAX_DELAY, val) +#define bfin_read_MXVR_LADDR() bfin_read32(MXVR_LADDR) +#define bfin_write_MXVR_LADDR(val) bfin_write32(MXVR_LADDR, val) +#define bfin_read_MXVR_GADDR() bfin_read16(MXVR_GADDR) +#define bfin_write_MXVR_GADDR(val) bfin_write16(MXVR_GADDR, val) +#define bfin_read_MXVR_AADDR() bfin_read32(MXVR_AADDR) +#define bfin_write_MXVR_AADDR(val) bfin_write32(MXVR_AADDR, val) + +/* MXVR Allocation Table Registers */ + +#define bfin_read_MXVR_ALLOC_0() bfin_read32(MXVR_ALLOC_0) +#define bfin_write_MXVR_ALLOC_0(val) bfin_write32(MXVR_ALLOC_0, val) +#define bfin_read_MXVR_ALLOC_1() bfin_read32(MXVR_ALLOC_1) +#define bfin_write_MXVR_ALLOC_1(val) bfin_write32(MXVR_ALLOC_1, val) +#define bfin_read_MXVR_ALLOC_2() bfin_read32(MXVR_ALLOC_2) +#define bfin_write_MXVR_ALLOC_2(val) bfin_write32(MXVR_ALLOC_2, val) +#define bfin_read_MXVR_ALLOC_3() bfin_read32(MXVR_ALLOC_3) +#define bfin_write_MXVR_ALLOC_3(val) bfin_write32(MXVR_ALLOC_3, val) +#define bfin_read_MXVR_ALLOC_4() bfin_read32(MXVR_ALLOC_4) +#define bfin_write_MXVR_ALLOC_4(val) bfin_write32(MXVR_ALLOC_4, val) +#define bfin_read_MXVR_ALLOC_5() bfin_read32(MXVR_ALLOC_5) +#define bfin_write_MXVR_ALLOC_5(val) bfin_write32(MXVR_ALLOC_5, val) +#define bfin_read_MXVR_ALLOC_6() bfin_read32(MXVR_ALLOC_6) +#define bfin_write_MXVR_ALLOC_6(val) bfin_write32(MXVR_ALLOC_6, val) +#define bfin_read_MXVR_ALLOC_7() bfin_read32(MXVR_ALLOC_7) +#define bfin_write_MXVR_ALLOC_7(val) bfin_write32(MXVR_ALLOC_7, val) +#define bfin_read_MXVR_ALLOC_8() bfin_read32(MXVR_ALLOC_8) +#define bfin_write_MXVR_ALLOC_8(val) bfin_write32(MXVR_ALLOC_8, val) +#define bfin_read_MXVR_ALLOC_9() bfin_read32(MXVR_ALLOC_9) +#define bfin_write_MXVR_ALLOC_9(val) bfin_write32(MXVR_ALLOC_9, val) +#define bfin_read_MXVR_ALLOC_10() bfin_read32(MXVR_ALLOC_10) +#define bfin_write_MXVR_ALLOC_10(val) bfin_write32(MXVR_ALLOC_10, val) +#define bfin_read_MXVR_ALLOC_11() bfin_read32(MXVR_ALLOC_11) +#define bfin_write_MXVR_ALLOC_11(val) bfin_write32(MXVR_ALLOC_11, val) +#define bfin_read_MXVR_ALLOC_12() bfin_read32(MXVR_ALLOC_12) +#define bfin_write_MXVR_ALLOC_12(val) bfin_write32(MXVR_ALLOC_12, val) +#define bfin_read_MXVR_ALLOC_13() bfin_read32(MXVR_ALLOC_13) +#define bfin_write_MXVR_ALLOC_13(val) bfin_write32(MXVR_ALLOC_13, val) +#define bfin_read_MXVR_ALLOC_14() bfin_read32(MXVR_ALLOC_14) +#define bfin_write_MXVR_ALLOC_14(val) bfin_write32(MXVR_ALLOC_14, val) + +/* MXVR Channel Assign Registers */ + +#define bfin_read_MXVR_SYNC_LCHAN_0() bfin_read32(MXVR_SYNC_LCHAN_0) +#define bfin_write_MXVR_SYNC_LCHAN_0(val) bfin_write32(MXVR_SYNC_LCHAN_0, val) +#define bfin_read_MXVR_SYNC_LCHAN_1() bfin_read32(MXVR_SYNC_LCHAN_1) +#define bfin_write_MXVR_SYNC_LCHAN_1(val) bfin_write32(MXVR_SYNC_LCHAN_1, val) +#define bfin_read_MXVR_SYNC_LCHAN_2() bfin_read32(MXVR_SYNC_LCHAN_2) +#define bfin_write_MXVR_SYNC_LCHAN_2(val) bfin_write32(MXVR_SYNC_LCHAN_2, val) +#define bfin_read_MXVR_SYNC_LCHAN_3() bfin_read32(MXVR_SYNC_LCHAN_3) +#define bfin_write_MXVR_SYNC_LCHAN_3(val) bfin_write32(MXVR_SYNC_LCHAN_3, val) +#define bfin_read_MXVR_SYNC_LCHAN_4() bfin_read32(MXVR_SYNC_LCHAN_4) +#define bfin_write_MXVR_SYNC_LCHAN_4(val) bfin_write32(MXVR_SYNC_LCHAN_4, val) +#define bfin_read_MXVR_SYNC_LCHAN_5() bfin_read32(MXVR_SYNC_LCHAN_5) +#define bfin_write_MXVR_SYNC_LCHAN_5(val) bfin_write32(MXVR_SYNC_LCHAN_5, val) +#define bfin_read_MXVR_SYNC_LCHAN_6() bfin_read32(MXVR_SYNC_LCHAN_6) +#define bfin_write_MXVR_SYNC_LCHAN_6(val) bfin_write32(MXVR_SYNC_LCHAN_6, val) +#define bfin_read_MXVR_SYNC_LCHAN_7() bfin_read32(MXVR_SYNC_LCHAN_7) +#define bfin_write_MXVR_SYNC_LCHAN_7(val) bfin_write32(MXVR_SYNC_LCHAN_7, val) + +/* MXVR DMA0 Registers */ + +#define bfin_read_MXVR_DMA0_CONFIG() bfin_read32(MXVR_DMA0_CONFIG) +#define bfin_write_MXVR_DMA0_CONFIG(val) bfin_write32(MXVR_DMA0_CONFIG, val) +#define bfin_read_MXVR_DMA0_START_ADDR() bfin_read32(MXVR_DMA0_START_ADDR) +#define bfin_write_MXVR_DMA0_START_ADDR(val) bfin_write32(MXVR_DMA0_START_ADDR) +#define bfin_read_MXVR_DMA0_COUNT() bfin_read16(MXVR_DMA0_COUNT) +#define bfin_write_MXVR_DMA0_COUNT(val) bfin_write16(MXVR_DMA0_COUNT, val) +#define bfin_read_MXVR_DMA0_CURR_ADDR() bfin_read32(MXVR_DMA0_CURR_ADDR) +#define bfin_write_MXVR_DMA0_CURR_ADDR(val) bfin_write32(MXVR_DMA0_CURR_ADDR) +#define bfin_read_MXVR_DMA0_CURR_COUNT() bfin_read16(MXVR_DMA0_CURR_COUNT) +#define bfin_write_MXVR_DMA0_CURR_COUNT(val) bfin_write16(MXVR_DMA0_CURR_COUNT, val) + +/* MXVR DMA1 Registers */ + +#define bfin_read_MXVR_DMA1_CONFIG() bfin_read32(MXVR_DMA1_CONFIG) +#define bfin_write_MXVR_DMA1_CONFIG(val) bfin_write32(MXVR_DMA1_CONFIG, val) +#define bfin_read_MXVR_DMA1_START_ADDR() bfin_read32(MXVR_DMA1_START_ADDR) +#define bfin_write_MXVR_DMA1_START_ADDR(val) bfin_write32(MXVR_DMA1_START_ADDR) +#define bfin_read_MXVR_DMA1_COUNT() bfin_read16(MXVR_DMA1_COUNT) +#define bfin_write_MXVR_DMA1_COUNT(val) bfin_write16(MXVR_DMA1_COUNT, val) +#define bfin_read_MXVR_DMA1_CURR_ADDR() bfin_read32(MXVR_DMA1_CURR_ADDR) +#define bfin_write_MXVR_DMA1_CURR_ADDR(val) bfin_write32(MXVR_DMA1_CURR_ADDR) +#define bfin_read_MXVR_DMA1_CURR_COUNT() bfin_read16(MXVR_DMA1_CURR_COUNT) +#define bfin_write_MXVR_DMA1_CURR_COUNT(val) bfin_write16(MXVR_DMA1_CURR_COUNT, val) + +/* MXVR DMA2 Registers */ + +#define bfin_read_MXVR_DMA2_CONFIG() bfin_read32(MXVR_DMA2_CONFIG) +#define bfin_write_MXVR_DMA2_CONFIG(val) bfin_write32(MXVR_DMA2_CONFIG, val) +#define bfin_read_MXVR_DMA2_START_ADDR() bfin_read32(MXVR_DMA2_START_ADDR) +#define bfin_write_MXVR_DMA2_START_ADDR(val) bfin_write32(MXVR_DMA2_START_ADDR) +#define bfin_read_MXVR_DMA2_COUNT() bfin_read16(MXVR_DMA2_COUNT) +#define bfin_write_MXVR_DMA2_COUNT(val) bfin_write16(MXVR_DMA2_COUNT, val) +#define bfin_read_MXVR_DMA2_CURR_ADDR() bfin_read32(MXVR_DMA2_CURR_ADDR) +#define bfin_write_MXVR_DMA2_CURR_ADDR(val) bfin_write32(MXVR_DMA2_CURR_ADDR) +#define bfin_read_MXVR_DMA2_CURR_COUNT() bfin_read16(MXVR_DMA2_CURR_COUNT) +#define bfin_write_MXVR_DMA2_CURR_COUNT(val) bfin_write16(MXVR_DMA2_CURR_COUNT, val) + +/* MXVR DMA3 Registers */ + +#define bfin_read_MXVR_DMA3_CONFIG() bfin_read32(MXVR_DMA3_CONFIG) +#define bfin_write_MXVR_DMA3_CONFIG(val) bfin_write32(MXVR_DMA3_CONFIG, val) +#define bfin_read_MXVR_DMA3_START_ADDR() bfin_read32(MXVR_DMA3_START_ADDR) +#define bfin_write_MXVR_DMA3_START_ADDR(val) bfin_write32(MXVR_DMA3_START_ADDR) +#define bfin_read_MXVR_DMA3_COUNT() bfin_read16(MXVR_DMA3_COUNT) +#define bfin_write_MXVR_DMA3_COUNT(val) bfin_write16(MXVR_DMA3_COUNT, val) +#define bfin_read_MXVR_DMA3_CURR_ADDR() bfin_read32(MXVR_DMA3_CURR_ADDR) +#define bfin_write_MXVR_DMA3_CURR_ADDR(val) bfin_write32(MXVR_DMA3_CURR_ADDR) +#define bfin_read_MXVR_DMA3_CURR_COUNT() bfin_read16(MXVR_DMA3_CURR_COUNT) +#define bfin_write_MXVR_DMA3_CURR_COUNT(val) bfin_write16(MXVR_DMA3_CURR_COUNT, val) + +/* MXVR DMA4 Registers */ + +#define bfin_read_MXVR_DMA4_CONFIG() bfin_read32(MXVR_DMA4_CONFIG) +#define bfin_write_MXVR_DMA4_CONFIG(val) bfin_write32(MXVR_DMA4_CONFIG, val) +#define bfin_read_MXVR_DMA4_START_ADDR() bfin_read32(MXVR_DMA4_START_ADDR) +#define bfin_write_MXVR_DMA4_START_ADDR(val) bfin_write32(MXVR_DMA4_START_ADDR) +#define bfin_read_MXVR_DMA4_COUNT() bfin_read16(MXVR_DMA4_COUNT) +#define bfin_write_MXVR_DMA4_COUNT(val) bfin_write16(MXVR_DMA4_COUNT, val) +#define bfin_read_MXVR_DMA4_CURR_ADDR() bfin_read32(MXVR_DMA4_CURR_ADDR) +#define bfin_write_MXVR_DMA4_CURR_ADDR(val) bfin_write32(MXVR_DMA4_CURR_ADDR) +#define bfin_read_MXVR_DMA4_CURR_COUNT() bfin_read16(MXVR_DMA4_CURR_COUNT) +#define bfin_write_MXVR_DMA4_CURR_COUNT(val) bfin_write16(MXVR_DMA4_CURR_COUNT, val) + +/* MXVR DMA5 Registers */ + +#define bfin_read_MXVR_DMA5_CONFIG() bfin_read32(MXVR_DMA5_CONFIG) +#define bfin_write_MXVR_DMA5_CONFIG(val) bfin_write32(MXVR_DMA5_CONFIG, val) +#define bfin_read_MXVR_DMA5_START_ADDR() bfin_read32(MXVR_DMA5_START_ADDR) +#define bfin_write_MXVR_DMA5_START_ADDR(val) bfin_write32(MXVR_DMA5_START_ADDR) +#define bfin_read_MXVR_DMA5_COUNT() bfin_read16(MXVR_DMA5_COUNT) +#define bfin_write_MXVR_DMA5_COUNT(val) bfin_write16(MXVR_DMA5_COUNT, val) +#define bfin_read_MXVR_DMA5_CURR_ADDR() bfin_read32(MXVR_DMA5_CURR_ADDR) +#define bfin_write_MXVR_DMA5_CURR_ADDR(val) bfin_write32(MXVR_DMA5_CURR_ADDR) +#define bfin_read_MXVR_DMA5_CURR_COUNT() bfin_read16(MXVR_DMA5_CURR_COUNT) +#define bfin_write_MXVR_DMA5_CURR_COUNT(val) bfin_write16(MXVR_DMA5_CURR_COUNT, val) + +/* MXVR DMA6 Registers */ + +#define bfin_read_MXVR_DMA6_CONFIG() bfin_read32(MXVR_DMA6_CONFIG) +#define bfin_write_MXVR_DMA6_CONFIG(val) bfin_write32(MXVR_DMA6_CONFIG, val) +#define bfin_read_MXVR_DMA6_START_ADDR() bfin_read32(MXVR_DMA6_START_ADDR) +#define bfin_write_MXVR_DMA6_START_ADDR(val) bfin_write32(MXVR_DMA6_START_ADDR) +#define bfin_read_MXVR_DMA6_COUNT() bfin_read16(MXVR_DMA6_COUNT) +#define bfin_write_MXVR_DMA6_COUNT(val) bfin_write16(MXVR_DMA6_COUNT, val) +#define bfin_read_MXVR_DMA6_CURR_ADDR() bfin_read32(MXVR_DMA6_CURR_ADDR) +#define bfin_write_MXVR_DMA6_CURR_ADDR(val) bfin_write32(MXVR_DMA6_CURR_ADDR) +#define bfin_read_MXVR_DMA6_CURR_COUNT() bfin_read16(MXVR_DMA6_CURR_COUNT) +#define bfin_write_MXVR_DMA6_CURR_COUNT(val) bfin_write16(MXVR_DMA6_CURR_COUNT, val) + +/* MXVR DMA7 Registers */ + +#define bfin_read_MXVR_DMA7_CONFIG() bfin_read32(MXVR_DMA7_CONFIG) +#define bfin_write_MXVR_DMA7_CONFIG(val) bfin_write32(MXVR_DMA7_CONFIG, val) +#define bfin_read_MXVR_DMA7_START_ADDR() bfin_read32(MXVR_DMA7_START_ADDR) +#define bfin_write_MXVR_DMA7_START_ADDR(val) bfin_write32(MXVR_DMA7_START_ADDR) +#define bfin_read_MXVR_DMA7_COUNT() bfin_read16(MXVR_DMA7_COUNT) +#define bfin_write_MXVR_DMA7_COUNT(val) bfin_write16(MXVR_DMA7_COUNT, val) +#define bfin_read_MXVR_DMA7_CURR_ADDR() bfin_read32(MXVR_DMA7_CURR_ADDR) +#define bfin_write_MXVR_DMA7_CURR_ADDR(val) bfin_write32(MXVR_DMA7_CURR_ADDR) +#define bfin_read_MXVR_DMA7_CURR_COUNT() bfin_read16(MXVR_DMA7_CURR_COUNT) +#define bfin_write_MXVR_DMA7_CURR_COUNT(val) bfin_write16(MXVR_DMA7_CURR_COUNT, val) + +/* MXVR Asynch Packet Registers */ + +#define bfin_read_MXVR_AP_CTL() bfin_read16(MXVR_AP_CTL) +#define bfin_write_MXVR_AP_CTL(val) bfin_write16(MXVR_AP_CTL, val) +#define bfin_read_MXVR_APRB_START_ADDR() bfin_read32(MXVR_APRB_START_ADDR) +#define bfin_write_MXVR_APRB_START_ADDR(val) bfin_write32(MXVR_APRB_START_ADDR) +#define bfin_read_MXVR_APRB_CURR_ADDR() bfin_read32(MXVR_APRB_CURR_ADDR) +#define bfin_write_MXVR_APRB_CURR_ADDR(val) bfin_write32(MXVR_APRB_CURR_ADDR) +#define bfin_read_MXVR_APTB_START_ADDR() bfin_read32(MXVR_APTB_START_ADDR) +#define bfin_write_MXVR_APTB_START_ADDR(val) bfin_write32(MXVR_APTB_START_ADDR) +#define bfin_read_MXVR_APTB_CURR_ADDR() bfin_read32(MXVR_APTB_CURR_ADDR) +#define bfin_write_MXVR_APTB_CURR_ADDR(val) bfin_write32(MXVR_APTB_CURR_ADDR) + +/* MXVR Control Message Registers */ + +#define bfin_read_MXVR_CM_CTL() bfin_read32(MXVR_CM_CTL) +#define bfin_write_MXVR_CM_CTL(val) bfin_write32(MXVR_CM_CTL, val) +#define bfin_read_MXVR_CMRB_START_ADDR() bfin_read32(MXVR_CMRB_START_ADDR) +#define bfin_write_MXVR_CMRB_START_ADDR(val) bfin_write32(MXVR_CMRB_START_ADDR) +#define bfin_read_MXVR_CMRB_CURR_ADDR() bfin_read32(MXVR_CMRB_CURR_ADDR) +#define bfin_write_MXVR_CMRB_CURR_ADDR(val) bfin_write32(MXVR_CMRB_CURR_ADDR) +#define bfin_read_MXVR_CMTB_START_ADDR() bfin_read32(MXVR_CMTB_START_ADDR) +#define bfin_write_MXVR_CMTB_START_ADDR(val) bfin_write32(MXVR_CMTB_START_ADDR) +#define bfin_read_MXVR_CMTB_CURR_ADDR() bfin_read32(MXVR_CMTB_CURR_ADDR) +#define bfin_write_MXVR_CMTB_CURR_ADDR(val) bfin_write32(MXVR_CMTB_CURR_ADDR) + +/* MXVR Remote Read Registers */ + +#define bfin_read_MXVR_RRDB_START_ADDR() bfin_read32(MXVR_RRDB_START_ADDR) +#define bfin_write_MXVR_RRDB_START_ADDR(val) bfin_write32(MXVR_RRDB_START_ADDR) +#define bfin_read_MXVR_RRDB_CURR_ADDR() bfin_read32(MXVR_RRDB_CURR_ADDR) +#define bfin_write_MXVR_RRDB_CURR_ADDR(val) bfin_write32(MXVR_RRDB_CURR_ADDR) + +/* MXVR Pattern Data Registers */ + +#define bfin_read_MXVR_PAT_DATA_0() bfin_read32(MXVR_PAT_DATA_0) +#define bfin_write_MXVR_PAT_DATA_0(val) bfin_write32(MXVR_PAT_DATA_0, val) +#define bfin_read_MXVR_PAT_EN_0() bfin_read32(MXVR_PAT_EN_0) +#define bfin_write_MXVR_PAT_EN_0(val) bfin_write32(MXVR_PAT_EN_0, val) +#define bfin_read_MXVR_PAT_DATA_1() bfin_read32(MXVR_PAT_DATA_1) +#define bfin_write_MXVR_PAT_DATA_1(val) bfin_write32(MXVR_PAT_DATA_1, val) +#define bfin_read_MXVR_PAT_EN_1() bfin_read32(MXVR_PAT_EN_1) +#define bfin_write_MXVR_PAT_EN_1(val) bfin_write32(MXVR_PAT_EN_1, val) + +/* MXVR Frame Counter Registers */ + +#define bfin_read_MXVR_FRAME_CNT_0() bfin_read16(MXVR_FRAME_CNT_0) +#define bfin_write_MXVR_FRAME_CNT_0(val) bfin_write16(MXVR_FRAME_CNT_0, val) +#define bfin_read_MXVR_FRAME_CNT_1() bfin_read16(MXVR_FRAME_CNT_1) +#define bfin_write_MXVR_FRAME_CNT_1(val) bfin_write16(MXVR_FRAME_CNT_1, val) + +/* MXVR Routing Table Registers */ + +#define bfin_read_MXVR_ROUTING_0() bfin_read32(MXVR_ROUTING_0) +#define bfin_write_MXVR_ROUTING_0(val) bfin_write32(MXVR_ROUTING_0, val) +#define bfin_read_MXVR_ROUTING_1() bfin_read32(MXVR_ROUTING_1) +#define bfin_write_MXVR_ROUTING_1(val) bfin_write32(MXVR_ROUTING_1, val) +#define bfin_read_MXVR_ROUTING_2() bfin_read32(MXVR_ROUTING_2) +#define bfin_write_MXVR_ROUTING_2(val) bfin_write32(MXVR_ROUTING_2, val) +#define bfin_read_MXVR_ROUTING_3() bfin_read32(MXVR_ROUTING_3) +#define bfin_write_MXVR_ROUTING_3(val) bfin_write32(MXVR_ROUTING_3, val) +#define bfin_read_MXVR_ROUTING_4() bfin_read32(MXVR_ROUTING_4) +#define bfin_write_MXVR_ROUTING_4(val) bfin_write32(MXVR_ROUTING_4, val) +#define bfin_read_MXVR_ROUTING_5() bfin_read32(MXVR_ROUTING_5) +#define bfin_write_MXVR_ROUTING_5(val) bfin_write32(MXVR_ROUTING_5, val) +#define bfin_read_MXVR_ROUTING_6() bfin_read32(MXVR_ROUTING_6) +#define bfin_write_MXVR_ROUTING_6(val) bfin_write32(MXVR_ROUTING_6, val) +#define bfin_read_MXVR_ROUTING_7() bfin_read32(MXVR_ROUTING_7) +#define bfin_write_MXVR_ROUTING_7(val) bfin_write32(MXVR_ROUTING_7, val) +#define bfin_read_MXVR_ROUTING_8() bfin_read32(MXVR_ROUTING_8) +#define bfin_write_MXVR_ROUTING_8(val) bfin_write32(MXVR_ROUTING_8, val) +#define bfin_read_MXVR_ROUTING_9() bfin_read32(MXVR_ROUTING_9) +#define bfin_write_MXVR_ROUTING_9(val) bfin_write32(MXVR_ROUTING_9, val) +#define bfin_read_MXVR_ROUTING_10() bfin_read32(MXVR_ROUTING_10) +#define bfin_write_MXVR_ROUTING_10(val) bfin_write32(MXVR_ROUTING_10, val) +#define bfin_read_MXVR_ROUTING_11() bfin_read32(MXVR_ROUTING_11) +#define bfin_write_MXVR_ROUTING_11(val) bfin_write32(MXVR_ROUTING_11, val) +#define bfin_read_MXVR_ROUTING_12() bfin_read32(MXVR_ROUTING_12) +#define bfin_write_MXVR_ROUTING_12(val) bfin_write32(MXVR_ROUTING_12, val) +#define bfin_read_MXVR_ROUTING_13() bfin_read32(MXVR_ROUTING_13) +#define bfin_write_MXVR_ROUTING_13(val) bfin_write32(MXVR_ROUTING_13, val) +#define bfin_read_MXVR_ROUTING_14() bfin_read32(MXVR_ROUTING_14) +#define bfin_write_MXVR_ROUTING_14(val) bfin_write32(MXVR_ROUTING_14, val) + +/* MXVR Counter-Clock-Control Registers */ + +#define bfin_read_MXVR_BLOCK_CNT() bfin_read16(MXVR_BLOCK_CNT) +#define bfin_write_MXVR_BLOCK_CNT(val) bfin_write16(MXVR_BLOCK_CNT, val) +#define bfin_read_MXVR_CLK_CTL() bfin_read32(MXVR_CLK_CTL) +#define bfin_write_MXVR_CLK_CTL(val) bfin_write32(MXVR_CLK_CTL, val) +#define bfin_read_MXVR_CDRPLL_CTL() bfin_read32(MXVR_CDRPLL_CTL) +#define bfin_write_MXVR_CDRPLL_CTL(val) bfin_write32(MXVR_CDRPLL_CTL, val) +#define bfin_read_MXVR_FMPLL_CTL() bfin_read32(MXVR_FMPLL_CTL) +#define bfin_write_MXVR_FMPLL_CTL(val) bfin_write32(MXVR_FMPLL_CTL, val) +#define bfin_read_MXVR_PIN_CTL() bfin_read16(MXVR_PIN_CTL) +#define bfin_write_MXVR_PIN_CTL(val) bfin_write16(MXVR_PIN_CTL, val) +#define bfin_read_MXVR_SCLK_CNT() bfin_read16(MXVR_SCLK_CNT) +#define bfin_write_MXVR_SCLK_CNT(val) bfin_write16(MXVR_SCLK_CNT, val) + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF549_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h new file mode 100644 index 00000000000..57ac8cb9b1f --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -0,0 +1,2750 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF54x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF54X_H +#define _CDEF_BF54X_H + +#include <asm/blackfin.h> + +#include "defBF54x_base.h" +#include <asm/system.h> + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ +/* ************************************************************** */ + +/* PLL Registers */ + +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); +} +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) + +/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ + +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + +/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */ + +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +/* SIC Registers */ + +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IMASK2() bfin_read32(SIC_IMASK2) +#define bfin_write_SIC_IMASK2(val) bfin_write32(SIC_IMASK2, val) +#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 2)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 2)), val) + +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_ISR2() bfin_read32(SIC_ISR2) +#define bfin_write_SIC_ISR2(val) bfin_write32(SIC_ISR2, val) +#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 2)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 2)), val) + +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) +#define bfin_read_SIC_IWR2() bfin_read32(SIC_IWR2) +#define bfin_write_SIC_IWR2(val) bfin_write32(SIC_IWR2, val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_IAR8() bfin_read32(SIC_IAR8) +#define bfin_write_SIC_IAR8(val) bfin_write32(SIC_IAR8, val) +#define bfin_read_SIC_IAR9() bfin_read32(SIC_IAR9) +#define bfin_write_SIC_IAR9(val) bfin_write32(SIC_IAR9, val) +#define bfin_read_SIC_IAR10() bfin_read32(SIC_IAR10) +#define bfin_write_SIC_IAR10(val) bfin_write32(SIC_IAR10, val) +#define bfin_read_SIC_IAR11() bfin_read32(SIC_IAR11) +#define bfin_write_SIC_IAR11(val) bfin_write32(SIC_IAR11, val) + +/* Watchdog Timer Registers */ + +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + +/* RTC Registers */ + +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + +/* UART0 Registers */ + +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_IER_SET() bfin_read16(UART0_IER_SET) +#define bfin_write_UART0_IER_SET(val) bfin_write16(UART0_IER_SET, val) +#define bfin_read_UART0_IER_CLEAR() bfin_read16(UART0_IER_CLEAR) +#define bfin_write_UART0_IER_CLEAR(val) bfin_write16(UART0_IER_CLEAR, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) + +/* SPI0 Registers */ + +#define bfin_read_SPI0_CTL() bfin_read16(SPI0_CTL) +#define bfin_write_SPI0_CTL(val) bfin_write16(SPI0_CTL, val) +#define bfin_read_SPI0_FLG() bfin_read16(SPI0_FLG) +#define bfin_write_SPI0_FLG(val) bfin_write16(SPI0_FLG, val) +#define bfin_read_SPI0_STAT() bfin_read16(SPI0_STAT) +#define bfin_write_SPI0_STAT(val) bfin_write16(SPI0_STAT, val) +#define bfin_read_SPI0_TDBR() bfin_read16(SPI0_TDBR) +#define bfin_write_SPI0_TDBR(val) bfin_write16(SPI0_TDBR, val) +#define bfin_read_SPI0_RDBR() bfin_read16(SPI0_RDBR) +#define bfin_write_SPI0_RDBR(val) bfin_write16(SPI0_RDBR, val) +#define bfin_read_SPI0_BAUD() bfin_read16(SPI0_BAUD) +#define bfin_write_SPI0_BAUD(val) bfin_write16(SPI0_BAUD, val) +#define bfin_read_SPI0_SHADOW() bfin_read16(SPI0_SHADOW) +#define bfin_write_SPI0_SHADOW(val) bfin_write16(SPI0_SHADOW, val) + +/* Timer Groubfin_read_() of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */ + +/* Two Wire Interface Registers (TWI0) */ + +/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ + +/* SPORT1 Registers */ + +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + +/* Asynchronous Memory Control Registers */ + +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_MBSCTL() bfin_read16(EBIU_MBSCTL) +#define bfin_write_EBIU_MBSCTL(val) bfin_write16(EBIU_MBSCTL, val) +#define bfin_read_EBIU_ARBSTAT() bfin_read32(EBIU_ARBSTAT) +#define bfin_write_EBIU_ARBSTAT(val) bfin_write32(EBIU_ARBSTAT, val) +#define bfin_read_EBIU_MODE() bfin_read32(EBIU_MODE) +#define bfin_write_EBIU_MODE(val) bfin_write32(EBIU_MODE, val) +#define bfin_read_EBIU_FCTL() bfin_read16(EBIU_FCTL) +#define bfin_write_EBIU_FCTL(val) bfin_write16(EBIU_FCTL, val) + +/* DDR Memory Control Registers */ + +#define bfin_read_EBIU_DDRCTL0() bfin_read32(EBIU_DDRCTL0) +#define bfin_write_EBIU_DDRCTL0(val) bfin_write32(EBIU_DDRCTL0, val) +#define bfin_read_EBIU_DDRCTL1() bfin_read32(EBIU_DDRCTL1) +#define bfin_write_EBIU_DDRCTL1(val) bfin_write32(EBIU_DDRCTL1, val) +#define bfin_read_EBIU_DDRCTL2() bfin_read32(EBIU_DDRCTL2) +#define bfin_write_EBIU_DDRCTL2(val) bfin_write32(EBIU_DDRCTL2, val) +#define bfin_read_EBIU_DDRCTL3() bfin_read32(EBIU_DDRCTL3) +#define bfin_write_EBIU_DDRCTL3(val) bfin_write32(EBIU_DDRCTL3, val) +#define bfin_read_EBIU_DDRQUE() bfin_read32(EBIU_DDRQUE) +#define bfin_write_EBIU_DDRQUE(val) bfin_write32(EBIU_DDRQUE, val) +#define bfin_read_EBIU_ERRADD() bfin_read32(EBIU_ERRADD) +#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD, val) +#define bfin_read_EBIU_ERRMST() bfin_read16(EBIU_ERRMST) +#define bfin_write_EBIU_ERRMST(val) bfin_write16(EBIU_ERRMST, val) +#define bfin_read_EBIU_RSTCTL() bfin_read16(EBIU_RSTCTL) +#define bfin_write_EBIU_RSTCTL(val) bfin_write16(EBIU_RSTCTL, val) + +/* DDR BankRead and Write Count Registers */ + +#define bfin_read_EBIU_DDRBRC0() bfin_read32(EBIU_DDRBRC0) +#define bfin_write_EBIU_DDRBRC0(val) bfin_write32(EBIU_DDRBRC0, val) +#define bfin_read_EBIU_DDRBRC1() bfin_read32(EBIU_DDRBRC1) +#define bfin_write_EBIU_DDRBRC1(val) bfin_write32(EBIU_DDRBRC1, val) +#define bfin_read_EBIU_DDRBRC2() bfin_read32(EBIU_DDRBRC2) +#define bfin_write_EBIU_DDRBRC2(val) bfin_write32(EBIU_DDRBRC2, val) +#define bfin_read_EBIU_DDRBRC3() bfin_read32(EBIU_DDRBRC3) +#define bfin_write_EBIU_DDRBRC3(val) bfin_write32(EBIU_DDRBRC3, val) +#define bfin_read_EBIU_DDRBRC4() bfin_read32(EBIU_DDRBRC4) +#define bfin_write_EBIU_DDRBRC4(val) bfin_write32(EBIU_DDRBRC4, val) +#define bfin_read_EBIU_DDRBRC5() bfin_read32(EBIU_DDRBRC5) +#define bfin_write_EBIU_DDRBRC5(val) bfin_write32(EBIU_DDRBRC5, val) +#define bfin_read_EBIU_DDRBRC6() bfin_read32(EBIU_DDRBRC6) +#define bfin_write_EBIU_DDRBRC6(val) bfin_write32(EBIU_DDRBRC6, val) +#define bfin_read_EBIU_DDRBRC7() bfin_read32(EBIU_DDRBRC7) +#define bfin_write_EBIU_DDRBRC7(val) bfin_write32(EBIU_DDRBRC7, val) +#define bfin_read_EBIU_DDRBWC0() bfin_read32(EBIU_DDRBWC0) +#define bfin_write_EBIU_DDRBWC0(val) bfin_write32(EBIU_DDRBWC0, val) +#define bfin_read_EBIU_DDRBWC1() bfin_read32(EBIU_DDRBWC1) +#define bfin_write_EBIU_DDRBWC1(val) bfin_write32(EBIU_DDRBWC1, val) +#define bfin_read_EBIU_DDRBWC2() bfin_read32(EBIU_DDRBWC2) +#define bfin_write_EBIU_DDRBWC2(val) bfin_write32(EBIU_DDRBWC2, val) +#define bfin_read_EBIU_DDRBWC3() bfin_read32(EBIU_DDRBWC3) +#define bfin_write_EBIU_DDRBWC3(val) bfin_write32(EBIU_DDRBWC3, val) +#define bfin_read_EBIU_DDRBWC4() bfin_read32(EBIU_DDRBWC4) +#define bfin_write_EBIU_DDRBWC4(val) bfin_write32(EBIU_DDRBWC4, val) +#define bfin_read_EBIU_DDRBWC5() bfin_read32(EBIU_DDRBWC5) +#define bfin_write_EBIU_DDRBWC5(val) bfin_write32(EBIU_DDRBWC5, val) +#define bfin_read_EBIU_DDRBWC6() bfin_read32(EBIU_DDRBWC6) +#define bfin_write_EBIU_DDRBWC6(val) bfin_write32(EBIU_DDRBWC6, val) +#define bfin_read_EBIU_DDRBWC7() bfin_read32(EBIU_DDRBWC7) +#define bfin_write_EBIU_DDRBWC7(val) bfin_write32(EBIU_DDRBWC7, val) +#define bfin_read_EBIU_DDRACCT() bfin_read32(EBIU_DDRACCT) +#define bfin_write_EBIU_DDRACCT(val) bfin_write32(EBIU_DDRACCT, val) +#define bfin_read_EBIU_DDRTACT() bfin_read32(EBIU_DDRTACT) +#define bfin_write_EBIU_DDRTACT(val) bfin_write32(EBIU_DDRTACT, val) +#define bfin_read_EBIU_DDRARCT() bfin_read32(EBIU_DDRARCT) +#define bfin_write_EBIU_DDRARCT(val) bfin_write32(EBIU_DDRARCT, val) +#define bfin_read_EBIU_DDRGC0() bfin_read32(EBIU_DDRGC0) +#define bfin_write_EBIU_DDRGC0(val) bfin_write32(EBIU_DDRGC0, val) +#define bfin_read_EBIU_DDRGC1() bfin_read32(EBIU_DDRGC1) +#define bfin_write_EBIU_DDRGC1(val) bfin_write32(EBIU_DDRGC1, val) +#define bfin_read_EBIU_DDRGC2() bfin_read32(EBIU_DDRGC2) +#define bfin_write_EBIU_DDRGC2(val) bfin_write32(EBIU_DDRGC2, val) +#define bfin_read_EBIU_DDRGC3() bfin_read32(EBIU_DDRGC3) +#define bfin_write_EBIU_DDRGC3(val) bfin_write32(EBIU_DDRGC3, val) +#define bfin_read_EBIU_DDRMCEN() bfin_read32(EBIU_DDRMCEN) +#define bfin_write_EBIU_DDRMCEN(val) bfin_write32(EBIU_DDRMCEN, val) +#define bfin_read_EBIU_DDRMCCL() bfin_read32(EBIU_DDRMCCL) +#define bfin_write_EBIU_DDRMCCL(val) bfin_write32(EBIU_DDRMCCL, val) + +/* DMAC0 Registers */ + +#define bfin_read_DMAC0_TCPER() bfin_read16(DMAC0_TCPER) +#define bfin_write_DMAC0_TCPER(val) bfin_write16(DMAC0_TCPER, val) +#define bfin_read_DMAC0_TCCNT() bfin_read16(DMAC0_TCCNT) +#define bfin_write_DMAC0_TCCNT(val) bfin_write16(DMAC0_TCCNT, val) + +/* DMA Channel 0 Registers */ + +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) + +/* DMA Channel 1 Registers */ + +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) + +/* DMA Channel 2 Registers */ + +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) + +/* DMA Channel 3 Registers */ + +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) + +/* DMA Channel 4 Registers */ + +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) + +/* DMA Channel 5 Registers */ + +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) + +/* DMA Channel 6 Registers */ + +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) + +/* DMA Channel 7 Registers */ + +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) + +/* DMA Channel 8 Registers */ + +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) + +/* DMA Channel 9 Registers */ + +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) + +/* DMA Channel 10 Registers */ + +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) + +/* DMA Channel 11 Registers */ + +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) + +/* MDMA Stream 0 Registers */ + +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) + +/* MDMA Stream 1 Registers */ + +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) + +/* EPPI1 Registers */ + +#define bfin_read_EPPI1_STATUS() bfin_read16(EPPI1_STATUS) +#define bfin_write_EPPI1_STATUS(val) bfin_write16(EPPI1_STATUS, val) +#define bfin_read_EPPI1_HCOUNT() bfin_read16(EPPI1_HCOUNT) +#define bfin_write_EPPI1_HCOUNT(val) bfin_write16(EPPI1_HCOUNT, val) +#define bfin_read_EPPI1_HDELAY() bfin_read16(EPPI1_HDELAY) +#define bfin_write_EPPI1_HDELAY(val) bfin_write16(EPPI1_HDELAY, val) +#define bfin_read_EPPI1_VCOUNT() bfin_read16(EPPI1_VCOUNT) +#define bfin_write_EPPI1_VCOUNT(val) bfin_write16(EPPI1_VCOUNT, val) +#define bfin_read_EPPI1_VDELAY() bfin_read16(EPPI1_VDELAY) +#define bfin_write_EPPI1_VDELAY(val) bfin_write16(EPPI1_VDELAY, val) +#define bfin_read_EPPI1_FRAME() bfin_read16(EPPI1_FRAME) +#define bfin_write_EPPI1_FRAME(val) bfin_write16(EPPI1_FRAME, val) +#define bfin_read_EPPI1_LINE() bfin_read16(EPPI1_LINE) +#define bfin_write_EPPI1_LINE(val) bfin_write16(EPPI1_LINE, val) +#define bfin_read_EPPI1_CLKDIV() bfin_read16(EPPI1_CLKDIV) +#define bfin_write_EPPI1_CLKDIV(val) bfin_write16(EPPI1_CLKDIV, val) +#define bfin_read_EPPI1_CONTROL() bfin_read32(EPPI1_CONTROL) +#define bfin_write_EPPI1_CONTROL(val) bfin_write32(EPPI1_CONTROL, val) +#define bfin_read_EPPI1_FS1W_HBL() bfin_read32(EPPI1_FS1W_HBL) +#define bfin_write_EPPI1_FS1W_HBL(val) bfin_write32(EPPI1_FS1W_HBL, val) +#define bfin_read_EPPI1_FS1P_AVPL() bfin_read32(EPPI1_FS1P_AVPL) +#define bfin_write_EPPI1_FS1P_AVPL(val) bfin_write32(EPPI1_FS1P_AVPL, val) +#define bfin_read_EPPI1_FS2W_LVB() bfin_read32(EPPI1_FS2W_LVB) +#define bfin_write_EPPI1_FS2W_LVB(val) bfin_write32(EPPI1_FS2W_LVB, val) +#define bfin_read_EPPI1_FS2P_LAVF() bfin_read32(EPPI1_FS2P_LAVF) +#define bfin_write_EPPI1_FS2P_LAVF(val) bfin_write32(EPPI1_FS2P_LAVF, val) +#define bfin_read_EPPI1_CLIP() bfin_read32(EPPI1_CLIP) +#define bfin_write_EPPI1_CLIP(val) bfin_write32(EPPI1_CLIP, val) + +/* Port Interrubfin_read_()t 0 Registers (32-bit) */ + +#define bfin_read_PINT0_MASK_SET() bfin_read32(PINT0_MASK_SET) +#define bfin_write_PINT0_MASK_SET(val) bfin_write32(PINT0_MASK_SET, val) +#define bfin_read_PINT0_MASK_CLEAR() bfin_read32(PINT0_MASK_CLEAR) +#define bfin_write_PINT0_MASK_CLEAR(val) bfin_write32(PINT0_MASK_CLEAR, val) +#define bfin_read_PINT0_REQUEST() bfin_read32(PINT0_REQUEST) +#define bfin_write_PINT0_REQUEST(val) bfin_write32(PINT0_REQUEST, val) +#define bfin_read_PINT0_ASSIGN() bfin_read32(PINT0_ASSIGN) +#define bfin_write_PINT0_ASSIGN(val) bfin_write32(PINT0_ASSIGN, val) +#define bfin_read_PINT0_EDGE_SET() bfin_read32(PINT0_EDGE_SET) +#define bfin_write_PINT0_EDGE_SET(val) bfin_write32(PINT0_EDGE_SET, val) +#define bfin_read_PINT0_EDGE_CLEAR() bfin_read32(PINT0_EDGE_CLEAR) +#define bfin_write_PINT0_EDGE_CLEAR(val) bfin_write32(PINT0_EDGE_CLEAR, val) +#define bfin_read_PINT0_INVERT_SET() bfin_read32(PINT0_INVERT_SET) +#define bfin_write_PINT0_INVERT_SET(val) bfin_write32(PINT0_INVERT_SET, val) +#define bfin_read_PINT0_INVERT_CLEAR() bfin_read32(PINT0_INVERT_CLEAR) +#define bfin_write_PINT0_INVERT_CLEAR(val) bfin_write32(PINT0_INVERT_CLEAR, val) +#define bfin_read_PINT0_PINSTATE() bfin_read32(PINT0_PINSTATE) +#define bfin_write_PINT0_PINSTATE(val) bfin_write32(PINT0_PINSTATE, val) +#define bfin_read_PINT0_LATCH() bfin_read32(PINT0_LATCH) +#define bfin_write_PINT0_LATCH(val) bfin_write32(PINT0_LATCH, val) + +/* Port Interrubfin_read_()t 1 Registers (32-bit) */ + +#define bfin_read_PINT1_MASK_SET() bfin_read32(PINT1_MASK_SET) +#define bfin_write_PINT1_MASK_SET(val) bfin_write32(PINT1_MASK_SET, val) +#define bfin_read_PINT1_MASK_CLEAR() bfin_read32(PINT1_MASK_CLEAR) +#define bfin_write_PINT1_MASK_CLEAR(val) bfin_write32(PINT1_MASK_CLEAR, val) +#define bfin_read_PINT1_REQUEST() bfin_read32(PINT1_REQUEST) +#define bfin_write_PINT1_REQUEST(val) bfin_write32(PINT1_REQUEST, val) +#define bfin_read_PINT1_ASSIGN() bfin_read32(PINT1_ASSIGN) +#define bfin_write_PINT1_ASSIGN(val) bfin_write32(PINT1_ASSIGN, val) +#define bfin_read_PINT1_EDGE_SET() bfin_read32(PINT1_EDGE_SET) +#define bfin_write_PINT1_EDGE_SET(val) bfin_write32(PINT1_EDGE_SET, val) +#define bfin_read_PINT1_EDGE_CLEAR() bfin_read32(PINT1_EDGE_CLEAR) +#define bfin_write_PINT1_EDGE_CLEAR(val) bfin_write32(PINT1_EDGE_CLEAR, val) +#define bfin_read_PINT1_INVERT_SET() bfin_read32(PINT1_INVERT_SET) +#define bfin_write_PINT1_INVERT_SET(val) bfin_write32(PINT1_INVERT_SET, val) +#define bfin_read_PINT1_INVERT_CLEAR() bfin_read32(PINT1_INVERT_CLEAR) +#define bfin_write_PINT1_INVERT_CLEAR(val) bfin_write32(PINT1_INVERT_CLEAR, val) +#define bfin_read_PINT1_PINSTATE() bfin_read32(PINT1_PINSTATE) +#define bfin_write_PINT1_PINSTATE(val) bfin_write32(PINT1_PINSTATE, val) +#define bfin_read_PINT1_LATCH() bfin_read32(PINT1_LATCH) +#define bfin_write_PINT1_LATCH(val) bfin_write32(PINT1_LATCH, val) + +/* Port Interrubfin_read_()t 2 Registers (32-bit) */ + +#define bfin_read_PINT2_MASK_SET() bfin_read32(PINT2_MASK_SET) +#define bfin_write_PINT2_MASK_SET(val) bfin_write32(PINT2_MASK_SET, val) +#define bfin_read_PINT2_MASK_CLEAR() bfin_read32(PINT2_MASK_CLEAR) +#define bfin_write_PINT2_MASK_CLEAR(val) bfin_write32(PINT2_MASK_CLEAR, val) +#define bfin_read_PINT2_REQUEST() bfin_read32(PINT2_REQUEST) +#define bfin_write_PINT2_REQUEST(val) bfin_write32(PINT2_REQUEST, val) +#define bfin_read_PINT2_ASSIGN() bfin_read32(PINT2_ASSIGN) +#define bfin_write_PINT2_ASSIGN(val) bfin_write32(PINT2_ASSIGN, val) +#define bfin_read_PINT2_EDGE_SET() bfin_read32(PINT2_EDGE_SET) +#define bfin_write_PINT2_EDGE_SET(val) bfin_write32(PINT2_EDGE_SET, val) +#define bfin_read_PINT2_EDGE_CLEAR() bfin_read32(PINT2_EDGE_CLEAR) +#define bfin_write_PINT2_EDGE_CLEAR(val) bfin_write32(PINT2_EDGE_CLEAR, val) +#define bfin_read_PINT2_INVERT_SET() bfin_read32(PINT2_INVERT_SET) +#define bfin_write_PINT2_INVERT_SET(val) bfin_write32(PINT2_INVERT_SET, val) +#define bfin_read_PINT2_INVERT_CLEAR() bfin_read32(PINT2_INVERT_CLEAR) +#define bfin_write_PINT2_INVERT_CLEAR(val) bfin_write32(PINT2_INVERT_CLEAR, val) +#define bfin_read_PINT2_PINSTATE() bfin_read32(PINT2_PINSTATE) +#define bfin_write_PINT2_PINSTATE(val) bfin_write32(PINT2_PINSTATE, val) +#define bfin_read_PINT2_LATCH() bfin_read32(PINT2_LATCH) +#define bfin_write_PINT2_LATCH(val) bfin_write32(PINT2_LATCH, val) + +/* Port Interrubfin_read_()t 3 Registers (32-bit) */ + +#define bfin_read_PINT3_MASK_SET() bfin_read32(PINT3_MASK_SET) +#define bfin_write_PINT3_MASK_SET(val) bfin_write32(PINT3_MASK_SET, val) +#define bfin_read_PINT3_MASK_CLEAR() bfin_read32(PINT3_MASK_CLEAR) +#define bfin_write_PINT3_MASK_CLEAR(val) bfin_write32(PINT3_MASK_CLEAR, val) +#define bfin_read_PINT3_REQUEST() bfin_read32(PINT3_REQUEST) +#define bfin_write_PINT3_REQUEST(val) bfin_write32(PINT3_REQUEST, val) +#define bfin_read_PINT3_ASSIGN() bfin_read32(PINT3_ASSIGN) +#define bfin_write_PINT3_ASSIGN(val) bfin_write32(PINT3_ASSIGN, val) +#define bfin_read_PINT3_EDGE_SET() bfin_read32(PINT3_EDGE_SET) +#define bfin_write_PINT3_EDGE_SET(val) bfin_write32(PINT3_EDGE_SET, val) +#define bfin_read_PINT3_EDGE_CLEAR() bfin_read32(PINT3_EDGE_CLEAR) +#define bfin_write_PINT3_EDGE_CLEAR(val) bfin_write32(PINT3_EDGE_CLEAR, val) +#define bfin_read_PINT3_INVERT_SET() bfin_read32(PINT3_INVERT_SET) +#define bfin_write_PINT3_INVERT_SET(val) bfin_write32(PINT3_INVERT_SET, val) +#define bfin_read_PINT3_INVERT_CLEAR() bfin_read32(PINT3_INVERT_CLEAR) +#define bfin_write_PINT3_INVERT_CLEAR(val) bfin_write32(PINT3_INVERT_CLEAR, val) +#define bfin_read_PINT3_PINSTATE() bfin_read32(PINT3_PINSTATE) +#define bfin_write_PINT3_PINSTATE(val) bfin_write32(PINT3_PINSTATE, val) +#define bfin_read_PINT3_LATCH() bfin_read32(PINT3_LATCH) +#define bfin_write_PINT3_LATCH(val) bfin_write32(PINT3_LATCH, val) + +/* Port A Registers */ + +#define bfin_read_PORTA_FER() bfin_read16(PORTA_FER) +#define bfin_write_PORTA_FER(val) bfin_write16(PORTA_FER, val) +#define bfin_read_PORTA() bfin_read16(PORTA) +#define bfin_write_PORTA(val) bfin_write16(PORTA, val) +#define bfin_read_PORTA_SET() bfin_read16(PORTA_SET) +#define bfin_write_PORTA_SET(val) bfin_write16(PORTA_SET, val) +#define bfin_read_PORTA_CLEAR() bfin_read16(PORTA_CLEAR) +#define bfin_write_PORTA_CLEAR(val) bfin_write16(PORTA_CLEAR, val) +#define bfin_read_PORTA_DIR_SET() bfin_read16(PORTA_DIR_SET) +#define bfin_write_PORTA_DIR_SET(val) bfin_write16(PORTA_DIR_SET, val) +#define bfin_read_PORTA_DIR_CLEAR() bfin_read16(PORTA_DIR_CLEAR) +#define bfin_write_PORTA_DIR_CLEAR(val) bfin_write16(PORTA_DIR_CLEAR, val) +#define bfin_read_PORTA_INEN() bfin_read16(PORTA_INEN) +#define bfin_write_PORTA_INEN(val) bfin_write16(PORTA_INEN, val) +#define bfin_read_PORTA_MUX() bfin_read32(PORTA_MUX) +#define bfin_write_PORTA_MUX(val) bfin_write32(PORTA_MUX, val) + +/* Port B Registers */ + +#define bfin_read_PORTB_FER() bfin_read16(PORTB_FER) +#define bfin_write_PORTB_FER(val) bfin_write16(PORTB_FER, val) +#define bfin_read_PORTB() bfin_read16(PORTB) +#define bfin_write_PORTB(val) bfin_write16(PORTB, val) +#define bfin_read_PORTB_SET() bfin_read16(PORTB_SET) +#define bfin_write_PORTB_SET(val) bfin_write16(PORTB_SET, val) +#define bfin_read_PORTB_CLEAR() bfin_read16(PORTB_CLEAR) +#define bfin_write_PORTB_CLEAR(val) bfin_write16(PORTB_CLEAR, val) +#define bfin_read_PORTB_DIR_SET() bfin_read16(PORTB_DIR_SET) +#define bfin_write_PORTB_DIR_SET(val) bfin_write16(PORTB_DIR_SET, val) +#define bfin_read_PORTB_DIR_CLEAR() bfin_read16(PORTB_DIR_CLEAR) +#define bfin_write_PORTB_DIR_CLEAR(val) bfin_write16(PORTB_DIR_CLEAR, val) +#define bfin_read_PORTB_INEN() bfin_read16(PORTB_INEN) +#define bfin_write_PORTB_INEN(val) bfin_write16(PORTB_INEN, val) +#define bfin_read_PORTB_MUX() bfin_read32(PORTB_MUX) +#define bfin_write_PORTB_MUX(val) bfin_write32(PORTB_MUX, val) + +/* Port C Registers */ + +#define bfin_read_PORTC_FER() bfin_read16(PORTC_FER) +#define bfin_write_PORTC_FER(val) bfin_write16(PORTC_FER, val) +#define bfin_read_PORTC() bfin_read16(PORTC) +#define bfin_write_PORTC(val) bfin_write16(PORTC, val) +#define bfin_read_PORTC_SET() bfin_read16(PORTC_SET) +#define bfin_write_PORTC_SET(val) bfin_write16(PORTC_SET, val) +#define bfin_read_PORTC_CLEAR() bfin_read16(PORTC_CLEAR) +#define bfin_write_PORTC_CLEAR(val) bfin_write16(PORTC_CLEAR, val) +#define bfin_read_PORTC_DIR_SET() bfin_read16(PORTC_DIR_SET) +#define bfin_write_PORTC_DIR_SET(val) bfin_write16(PORTC_DIR_SET, val) +#define bfin_read_PORTC_DIR_CLEAR() bfin_read16(PORTC_DIR_CLEAR) +#define bfin_write_PORTC_DIR_CLEAR(val) bfin_write16(PORTC_DIR_CLEAR, val) +#define bfin_read_PORTC_INEN() bfin_read16(PORTC_INEN) +#define bfin_write_PORTC_INEN(val) bfin_write16(PORTC_INEN, val) +#define bfin_read_PORTC_MUX() bfin_read32(PORTC_MUX) +#define bfin_write_PORTC_MUX(val) bfin_write32(PORTC_MUX, val) + +/* Port D Registers */ + +#define bfin_read_PORTD_FER() bfin_read16(PORTD_FER) +#define bfin_write_PORTD_FER(val) bfin_write16(PORTD_FER, val) +#define bfin_read_PORTD() bfin_read16(PORTD) +#define bfin_write_PORTD(val) bfin_write16(PORTD, val) +#define bfin_read_PORTD_SET() bfin_read16(PORTD_SET) +#define bfin_write_PORTD_SET(val) bfin_write16(PORTD_SET, val) +#define bfin_read_PORTD_CLEAR() bfin_read16(PORTD_CLEAR) +#define bfin_write_PORTD_CLEAR(val) bfin_write16(PORTD_CLEAR, val) +#define bfin_read_PORTD_DIR_SET() bfin_read16(PORTD_DIR_SET) +#define bfin_write_PORTD_DIR_SET(val) bfin_write16(PORTD_DIR_SET, val) +#define bfin_read_PORTD_DIR_CLEAR() bfin_read16(PORTD_DIR_CLEAR) +#define bfin_write_PORTD_DIR_CLEAR(val) bfin_write16(PORTD_DIR_CLEAR, val) +#define bfin_read_PORTD_INEN() bfin_read16(PORTD_INEN) +#define bfin_write_PORTD_INEN(val) bfin_write16(PORTD_INEN, val) +#define bfin_read_PORTD_MUX() bfin_read32(PORTD_MUX) +#define bfin_write_PORTD_MUX(val) bfin_write32(PORTD_MUX, val) + +/* Port E Registers */ + +#define bfin_read_PORTE_FER() bfin_read16(PORTE_FER) +#define bfin_write_PORTE_FER(val) bfin_write16(PORTE_FER, val) +#define bfin_read_PORTE() bfin_read16(PORTE) +#define bfin_write_PORTE(val) bfin_write16(PORTE, val) +#define bfin_read_PORTE_SET() bfin_read16(PORTE_SET) +#define bfin_write_PORTE_SET(val) bfin_write16(PORTE_SET, val) +#define bfin_read_PORTE_CLEAR() bfin_read16(PORTE_CLEAR) +#define bfin_write_PORTE_CLEAR(val) bfin_write16(PORTE_CLEAR, val) +#define bfin_read_PORTE_DIR_SET() bfin_read16(PORTE_DIR_SET) +#define bfin_write_PORTE_DIR_SET(val) bfin_write16(PORTE_DIR_SET, val) +#define bfin_read_PORTE_DIR_CLEAR() bfin_read16(PORTE_DIR_CLEAR) +#define bfin_write_PORTE_DIR_CLEAR(val) bfin_write16(PORTE_DIR_CLEAR, val) +#define bfin_read_PORTE_INEN() bfin_read16(PORTE_INEN) +#define bfin_write_PORTE_INEN(val) bfin_write16(PORTE_INEN, val) +#define bfin_read_PORTE_MUX() bfin_read32(PORTE_MUX) +#define bfin_write_PORTE_MUX(val) bfin_write32(PORTE_MUX, val) + +/* Port F Registers */ + +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTF() bfin_read16(PORTF) +#define bfin_write_PORTF(val) bfin_write16(PORTF, val) +#define bfin_read_PORTF_SET() bfin_read16(PORTF_SET) +#define bfin_write_PORTF_SET(val) bfin_write16(PORTF_SET, val) +#define bfin_read_PORTF_CLEAR() bfin_read16(PORTF_CLEAR) +#define bfin_write_PORTF_CLEAR(val) bfin_write16(PORTF_CLEAR, val) +#define bfin_read_PORTF_DIR_SET() bfin_read16(PORTF_DIR_SET) +#define bfin_write_PORTF_DIR_SET(val) bfin_write16(PORTF_DIR_SET, val) +#define bfin_read_PORTF_DIR_CLEAR() bfin_read16(PORTF_DIR_CLEAR) +#define bfin_write_PORTF_DIR_CLEAR(val) bfin_write16(PORTF_DIR_CLEAR, val) +#define bfin_read_PORTF_INEN() bfin_read16(PORTF_INEN) +#define bfin_write_PORTF_INEN(val) bfin_write16(PORTF_INEN, val) +#define bfin_read_PORTF_MUX() bfin_read32(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write32(PORTF_MUX, val) + +/* Port G Registers */ + +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTG() bfin_read16(PORTG) +#define bfin_write_PORTG(val) bfin_write16(PORTG, val) +#define bfin_read_PORTG_SET() bfin_read16(PORTG_SET) +#define bfin_write_PORTG_SET(val) bfin_write16(PORTG_SET, val) +#define bfin_read_PORTG_CLEAR() bfin_read16(PORTG_CLEAR) +#define bfin_write_PORTG_CLEAR(val) bfin_write16(PORTG_CLEAR, val) +#define bfin_read_PORTG_DIR_SET() bfin_read16(PORTG_DIR_SET) +#define bfin_write_PORTG_DIR_SET(val) bfin_write16(PORTG_DIR_SET, val) +#define bfin_read_PORTG_DIR_CLEAR() bfin_read16(PORTG_DIR_CLEAR) +#define bfin_write_PORTG_DIR_CLEAR(val) bfin_write16(PORTG_DIR_CLEAR, val) +#define bfin_read_PORTG_INEN() bfin_read16(PORTG_INEN) +#define bfin_write_PORTG_INEN(val) bfin_write16(PORTG_INEN, val) +#define bfin_read_PORTG_MUX() bfin_read32(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write32(PORTG_MUX, val) + +/* Port H Registers */ + +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORTH() bfin_read16(PORTH) +#define bfin_write_PORTH(val) bfin_write16(PORTH, val) +#define bfin_read_PORTH_SET() bfin_read16(PORTH_SET) +#define bfin_write_PORTH_SET(val) bfin_write16(PORTH_SET, val) +#define bfin_read_PORTH_CLEAR() bfin_read16(PORTH_CLEAR) +#define bfin_write_PORTH_CLEAR(val) bfin_write16(PORTH_CLEAR, val) +#define bfin_read_PORTH_DIR_SET() bfin_read16(PORTH_DIR_SET) +#define bfin_write_PORTH_DIR_SET(val) bfin_write16(PORTH_DIR_SET, val) +#define bfin_read_PORTH_DIR_CLEAR() bfin_read16(PORTH_DIR_CLEAR) +#define bfin_write_PORTH_DIR_CLEAR(val) bfin_write16(PORTH_DIR_CLEAR, val) +#define bfin_read_PORTH_INEN() bfin_read16(PORTH_INEN) +#define bfin_write_PORTH_INEN(val) bfin_write16(PORTH_INEN, val) +#define bfin_read_PORTH_MUX() bfin_read32(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write32(PORTH_MUX, val) + +/* Port I Registers */ + +#define bfin_read_PORTI_FER() bfin_read16(PORTI_FER) +#define bfin_write_PORTI_FER(val) bfin_write16(PORTI_FER, val) +#define bfin_read_PORTI() bfin_read16(PORTI) +#define bfin_write_PORTI(val) bfin_write16(PORTI, val) +#define bfin_read_PORTI_SET() bfin_read16(PORTI_SET) +#define bfin_write_PORTI_SET(val) bfin_write16(PORTI_SET, val) +#define bfin_read_PORTI_CLEAR() bfin_read16(PORTI_CLEAR) +#define bfin_write_PORTI_CLEAR(val) bfin_write16(PORTI_CLEAR, val) +#define bfin_read_PORTI_DIR_SET() bfin_read16(PORTI_DIR_SET) +#define bfin_write_PORTI_DIR_SET(val) bfin_write16(PORTI_DIR_SET, val) +#define bfin_read_PORTI_DIR_CLEAR() bfin_read16(PORTI_DIR_CLEAR) +#define bfin_write_PORTI_DIR_CLEAR(val) bfin_write16(PORTI_DIR_CLEAR, val) +#define bfin_read_PORTI_INEN() bfin_read16(PORTI_INEN) +#define bfin_write_PORTI_INEN(val) bfin_write16(PORTI_INEN, val) +#define bfin_read_PORTI_MUX() bfin_read32(PORTI_MUX) +#define bfin_write_PORTI_MUX(val) bfin_write32(PORTI_MUX, val) + +/* Port J Registers */ + +#define bfin_read_PORTJ_FER() bfin_read16(PORTJ_FER) +#define bfin_write_PORTJ_FER(val) bfin_write16(PORTJ_FER, val) +#define bfin_read_PORTJ() bfin_read16(PORTJ) +#define bfin_write_PORTJ(val) bfin_write16(PORTJ, val) +#define bfin_read_PORTJ_SET() bfin_read16(PORTJ_SET) +#define bfin_write_PORTJ_SET(val) bfin_write16(PORTJ_SET, val) +#define bfin_read_PORTJ_CLEAR() bfin_read16(PORTJ_CLEAR) +#define bfin_write_PORTJ_CLEAR(val) bfin_write16(PORTJ_CLEAR, val) +#define bfin_read_PORTJ_DIR_SET() bfin_read16(PORTJ_DIR_SET) +#define bfin_write_PORTJ_DIR_SET(val) bfin_write16(PORTJ_DIR_SET, val) +#define bfin_read_PORTJ_DIR_CLEAR() bfin_read16(PORTJ_DIR_CLEAR) +#define bfin_write_PORTJ_DIR_CLEAR(val) bfin_write16(PORTJ_DIR_CLEAR, val) +#define bfin_read_PORTJ_INEN() bfin_read16(PORTJ_INEN) +#define bfin_write_PORTJ_INEN(val) bfin_write16(PORTJ_INEN, val) +#define bfin_read_PORTJ_MUX() bfin_read32(PORTJ_MUX) +#define bfin_write_PORTJ_MUX(val) bfin_write32(PORTJ_MUX, val) + +/* PWM Timer Registers */ + +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +/* Timer Groubfin_read_() of 8 */ + +#define bfin_read_TIMER_ENABLE0() bfin_read16(TIMER_ENABLE0) +#define bfin_write_TIMER_ENABLE0(val) bfin_write16(TIMER_ENABLE0, val) +#define bfin_read_TIMER_DISABLE0() bfin_read16(TIMER_DISABLE0) +#define bfin_write_TIMER_DISABLE0(val) bfin_write16(TIMER_DISABLE0, val) +#define bfin_read_TIMER_STATUS0() bfin_read32(TIMER_STATUS0) +#define bfin_write_TIMER_STATUS0(val) bfin_write32(TIMER_STATUS0, val) + +/* DMAC1 Registers */ + +#define bfin_read_DMAC1_TCPER() bfin_read16(DMAC1_TCPER) +#define bfin_write_DMAC1_TCPER(val) bfin_write16(DMAC1_TCPER, val) +#define bfin_read_DMAC1_TCCNT() bfin_read16(DMAC1_TCCNT) +#define bfin_write_DMAC1_TCCNT(val) bfin_write16(DMAC1_TCCNT, val) + +/* DMA Channel 12 Registers */ + +#define bfin_read_DMA12_NEXT_DESC_PTR() bfin_read32(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR, val) +#define bfin_read_DMA12_START_ADDR() bfin_read32(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR, val) +#define bfin_read_DMA12_CONFIG() bfin_read16(DMA12_CONFIG) +#define bfin_write_DMA12_CONFIG(val) bfin_write16(DMA12_CONFIG, val) +#define bfin_read_DMA12_X_COUNT() bfin_read16(DMA12_X_COUNT) +#define bfin_write_DMA12_X_COUNT(val) bfin_write16(DMA12_X_COUNT, val) +#define bfin_read_DMA12_X_MODIFY() bfin_read16(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY, val) +#define bfin_read_DMA12_Y_COUNT() bfin_read16(DMA12_Y_COUNT) +#define bfin_write_DMA12_Y_COUNT(val) bfin_write16(DMA12_Y_COUNT, val) +#define bfin_read_DMA12_Y_MODIFY() bfin_read16(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY, val) +#define bfin_read_DMA12_CURR_DESC_PTR() bfin_read32(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR, val) +#define bfin_read_DMA12_CURR_ADDR() bfin_read32(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR, val) +#define bfin_read_DMA12_IRQ_STATUS() bfin_read16(DMA12_IRQ_STATUS) +#define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val) +#define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP) +#define bfin_write_DMA12_PERIPHERAL_MAP(val) bfin_write16(DMA12_PERIPHERAL_MAP, val) +#define bfin_read_DMA12_CURR_X_COUNT() bfin_read16(DMA12_CURR_X_COUNT) +#define bfin_write_DMA12_CURR_X_COUNT(val) bfin_write16(DMA12_CURR_X_COUNT, val) +#define bfin_read_DMA12_CURR_Y_COUNT() bfin_read16(DMA12_CURR_Y_COUNT) +#define bfin_write_DMA12_CURR_Y_COUNT(val) bfin_write16(DMA12_CURR_Y_COUNT, val) + +/* DMA Channel 13 Registers */ + +#define bfin_read_DMA13_NEXT_DESC_PTR() bfin_read32(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR, val) +#define bfin_read_DMA13_START_ADDR() bfin_read32(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR, val) +#define bfin_read_DMA13_CONFIG() bfin_read16(DMA13_CONFIG) +#define bfin_write_DMA13_CONFIG(val) bfin_write16(DMA13_CONFIG, val) +#define bfin_read_DMA13_X_COUNT() bfin_read16(DMA13_X_COUNT) +#define bfin_write_DMA13_X_COUNT(val) bfin_write16(DMA13_X_COUNT, val) +#define bfin_read_DMA13_X_MODIFY() bfin_read16(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY, val) +#define bfin_read_DMA13_Y_COUNT() bfin_read16(DMA13_Y_COUNT) +#define bfin_write_DMA13_Y_COUNT(val) bfin_write16(DMA13_Y_COUNT, val) +#define bfin_read_DMA13_Y_MODIFY() bfin_read16(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY, val) +#define bfin_read_DMA13_CURR_DESC_PTR() bfin_read32(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR, val) +#define bfin_read_DMA13_CURR_ADDR() bfin_read32(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR, val) +#define bfin_read_DMA13_IRQ_STATUS() bfin_read16(DMA13_IRQ_STATUS) +#define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val) +#define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP) +#define bfin_write_DMA13_PERIPHERAL_MAP(val) bfin_write16(DMA13_PERIPHERAL_MAP, val) +#define bfin_read_DMA13_CURR_X_COUNT() bfin_read16(DMA13_CURR_X_COUNT) +#define bfin_write_DMA13_CURR_X_COUNT(val) bfin_write16(DMA13_CURR_X_COUNT, val) +#define bfin_read_DMA13_CURR_Y_COUNT() bfin_read16(DMA13_CURR_Y_COUNT) +#define bfin_write_DMA13_CURR_Y_COUNT(val) bfin_write16(DMA13_CURR_Y_COUNT, val) + +/* DMA Channel 14 Registers */ + +#define bfin_read_DMA14_NEXT_DESC_PTR() bfin_read32(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR, val) +#define bfin_read_DMA14_START_ADDR() bfin_read32(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR, val) +#define bfin_read_DMA14_CONFIG() bfin_read16(DMA14_CONFIG) +#define bfin_write_DMA14_CONFIG(val) bfin_write16(DMA14_CONFIG, val) +#define bfin_read_DMA14_X_COUNT() bfin_read16(DMA14_X_COUNT) +#define bfin_write_DMA14_X_COUNT(val) bfin_write16(DMA14_X_COUNT, val) +#define bfin_read_DMA14_X_MODIFY() bfin_read16(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY, val) +#define bfin_read_DMA14_Y_COUNT() bfin_read16(DMA14_Y_COUNT) +#define bfin_write_DMA14_Y_COUNT(val) bfin_write16(DMA14_Y_COUNT, val) +#define bfin_read_DMA14_Y_MODIFY() bfin_read16(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY, val) +#define bfin_read_DMA14_CURR_DESC_PTR() bfin_read32(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR, val) +#define bfin_read_DMA14_CURR_ADDR() bfin_read32(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR, val) +#define bfin_read_DMA14_IRQ_STATUS() bfin_read16(DMA14_IRQ_STATUS) +#define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val) +#define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP) +#define bfin_write_DMA14_PERIPHERAL_MAP(val) bfin_write16(DMA14_PERIPHERAL_MAP, val) +#define bfin_read_DMA14_CURR_X_COUNT() bfin_read16(DMA14_CURR_X_COUNT) +#define bfin_write_DMA14_CURR_X_COUNT(val) bfin_write16(DMA14_CURR_X_COUNT, val) +#define bfin_read_DMA14_CURR_Y_COUNT() bfin_read16(DMA14_CURR_Y_COUNT) +#define bfin_write_DMA14_CURR_Y_COUNT(val) bfin_write16(DMA14_CURR_Y_COUNT, val) + +/* DMA Channel 15 Registers */ + +#define bfin_read_DMA15_NEXT_DESC_PTR() bfin_read32(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR, val) +#define bfin_read_DMA15_START_ADDR() bfin_read32(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR, val) +#define bfin_read_DMA15_CONFIG() bfin_read16(DMA15_CONFIG) +#define bfin_write_DMA15_CONFIG(val) bfin_write16(DMA15_CONFIG, val) +#define bfin_read_DMA15_X_COUNT() bfin_read16(DMA15_X_COUNT) +#define bfin_write_DMA15_X_COUNT(val) bfin_write16(DMA15_X_COUNT, val) +#define bfin_read_DMA15_X_MODIFY() bfin_read16(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY, val) +#define bfin_read_DMA15_Y_COUNT() bfin_read16(DMA15_Y_COUNT) +#define bfin_write_DMA15_Y_COUNT(val) bfin_write16(DMA15_Y_COUNT, val) +#define bfin_read_DMA15_Y_MODIFY() bfin_read16(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY, val) +#define bfin_read_DMA15_CURR_DESC_PTR() bfin_read32(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR, val) +#define bfin_read_DMA15_CURR_ADDR() bfin_read32(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR, val) +#define bfin_read_DMA15_IRQ_STATUS() bfin_read16(DMA15_IRQ_STATUS) +#define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val) +#define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP) +#define bfin_write_DMA15_PERIPHERAL_MAP(val) bfin_write16(DMA15_PERIPHERAL_MAP, val) +#define bfin_read_DMA15_CURR_X_COUNT() bfin_read16(DMA15_CURR_X_COUNT) +#define bfin_write_DMA15_CURR_X_COUNT(val) bfin_write16(DMA15_CURR_X_COUNT, val) +#define bfin_read_DMA15_CURR_Y_COUNT() bfin_read16(DMA15_CURR_Y_COUNT) +#define bfin_write_DMA15_CURR_Y_COUNT(val) bfin_write16(DMA15_CURR_Y_COUNT, val) + +/* DMA Channel 16 Registers */ + +#define bfin_read_DMA16_NEXT_DESC_PTR() bfin_read32(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR, val) +#define bfin_read_DMA16_START_ADDR() bfin_read32(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR, val) +#define bfin_read_DMA16_CONFIG() bfin_read16(DMA16_CONFIG) +#define bfin_write_DMA16_CONFIG(val) bfin_write16(DMA16_CONFIG, val) +#define bfin_read_DMA16_X_COUNT() bfin_read16(DMA16_X_COUNT) +#define bfin_write_DMA16_X_COUNT(val) bfin_write16(DMA16_X_COUNT, val) +#define bfin_read_DMA16_X_MODIFY() bfin_read16(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY, val) +#define bfin_read_DMA16_Y_COUNT() bfin_read16(DMA16_Y_COUNT) +#define bfin_write_DMA16_Y_COUNT(val) bfin_write16(DMA16_Y_COUNT, val) +#define bfin_read_DMA16_Y_MODIFY() bfin_read16(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY, val) +#define bfin_read_DMA16_CURR_DESC_PTR() bfin_read32(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR, val) +#define bfin_read_DMA16_CURR_ADDR() bfin_read32(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR, val) +#define bfin_read_DMA16_IRQ_STATUS() bfin_read16(DMA16_IRQ_STATUS) +#define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val) +#define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP) +#define bfin_write_DMA16_PERIPHERAL_MAP(val) bfin_write16(DMA16_PERIPHERAL_MAP, val) +#define bfin_read_DMA16_CURR_X_COUNT() bfin_read16(DMA16_CURR_X_COUNT) +#define bfin_write_DMA16_CURR_X_COUNT(val) bfin_write16(DMA16_CURR_X_COUNT, val) +#define bfin_read_DMA16_CURR_Y_COUNT() bfin_read16(DMA16_CURR_Y_COUNT) +#define bfin_write_DMA16_CURR_Y_COUNT(val) bfin_write16(DMA16_CURR_Y_COUNT, val) + +/* DMA Channel 17 Registers */ + +#define bfin_read_DMA17_NEXT_DESC_PTR() bfin_read32(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR, val) +#define bfin_read_DMA17_START_ADDR() bfin_read32(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR, val) +#define bfin_read_DMA17_CONFIG() bfin_read16(DMA17_CONFIG) +#define bfin_write_DMA17_CONFIG(val) bfin_write16(DMA17_CONFIG, val) +#define bfin_read_DMA17_X_COUNT() bfin_read16(DMA17_X_COUNT) +#define bfin_write_DMA17_X_COUNT(val) bfin_write16(DMA17_X_COUNT, val) +#define bfin_read_DMA17_X_MODIFY() bfin_read16(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY, val) +#define bfin_read_DMA17_Y_COUNT() bfin_read16(DMA17_Y_COUNT) +#define bfin_write_DMA17_Y_COUNT(val) bfin_write16(DMA17_Y_COUNT, val) +#define bfin_read_DMA17_Y_MODIFY() bfin_read16(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY, val) +#define bfin_read_DMA17_CURR_DESC_PTR() bfin_read32(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR, val) +#define bfin_read_DMA17_CURR_ADDR() bfin_read32(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR, val) +#define bfin_read_DMA17_IRQ_STATUS() bfin_read16(DMA17_IRQ_STATUS) +#define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val) +#define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP) +#define bfin_write_DMA17_PERIPHERAL_MAP(val) bfin_write16(DMA17_PERIPHERAL_MAP, val) +#define bfin_read_DMA17_CURR_X_COUNT() bfin_read16(DMA17_CURR_X_COUNT) +#define bfin_write_DMA17_CURR_X_COUNT(val) bfin_write16(DMA17_CURR_X_COUNT, val) +#define bfin_read_DMA17_CURR_Y_COUNT() bfin_read16(DMA17_CURR_Y_COUNT) +#define bfin_write_DMA17_CURR_Y_COUNT(val) bfin_write16(DMA17_CURR_Y_COUNT, val) + +/* DMA Channel 18 Registers */ + +#define bfin_read_DMA18_NEXT_DESC_PTR() bfin_read32(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR, val) +#define bfin_read_DMA18_START_ADDR() bfin_read32(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR, val) +#define bfin_read_DMA18_CONFIG() bfin_read16(DMA18_CONFIG) +#define bfin_write_DMA18_CONFIG(val) bfin_write16(DMA18_CONFIG, val) +#define bfin_read_DMA18_X_COUNT() bfin_read16(DMA18_X_COUNT) +#define bfin_write_DMA18_X_COUNT(val) bfin_write16(DMA18_X_COUNT, val) +#define bfin_read_DMA18_X_MODIFY() bfin_read16(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY, val) +#define bfin_read_DMA18_Y_COUNT() bfin_read16(DMA18_Y_COUNT) +#define bfin_write_DMA18_Y_COUNT(val) bfin_write16(DMA18_Y_COUNT, val) +#define bfin_read_DMA18_Y_MODIFY() bfin_read16(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY, val) +#define bfin_read_DMA18_CURR_DESC_PTR() bfin_read32(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR, val) +#define bfin_read_DMA18_CURR_ADDR() bfin_read32(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR, val) +#define bfin_read_DMA18_IRQ_STATUS() bfin_read16(DMA18_IRQ_STATUS) +#define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val) +#define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP) +#define bfin_write_DMA18_PERIPHERAL_MAP(val) bfin_write16(DMA18_PERIPHERAL_MAP, val) +#define bfin_read_DMA18_CURR_X_COUNT() bfin_read16(DMA18_CURR_X_COUNT) +#define bfin_write_DMA18_CURR_X_COUNT(val) bfin_write16(DMA18_CURR_X_COUNT, val) +#define bfin_read_DMA18_CURR_Y_COUNT() bfin_read16(DMA18_CURR_Y_COUNT) +#define bfin_write_DMA18_CURR_Y_COUNT(val) bfin_write16(DMA18_CURR_Y_COUNT, val) + +/* DMA Channel 19 Registers */ + +#define bfin_read_DMA19_NEXT_DESC_PTR() bfin_read32(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR, val) +#define bfin_read_DMA19_START_ADDR() bfin_read32(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR, val) +#define bfin_read_DMA19_CONFIG() bfin_read16(DMA19_CONFIG) +#define bfin_write_DMA19_CONFIG(val) bfin_write16(DMA19_CONFIG, val) +#define bfin_read_DMA19_X_COUNT() bfin_read16(DMA19_X_COUNT) +#define bfin_write_DMA19_X_COUNT(val) bfin_write16(DMA19_X_COUNT, val) +#define bfin_read_DMA19_X_MODIFY() bfin_read16(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY, val) +#define bfin_read_DMA19_Y_COUNT() bfin_read16(DMA19_Y_COUNT) +#define bfin_write_DMA19_Y_COUNT(val) bfin_write16(DMA19_Y_COUNT, val) +#define bfin_read_DMA19_Y_MODIFY() bfin_read16(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY, val) +#define bfin_read_DMA19_CURR_DESC_PTR() bfin_read32(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR, val) +#define bfin_read_DMA19_CURR_ADDR() bfin_read32(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR, val) +#define bfin_read_DMA19_IRQ_STATUS() bfin_read16(DMA19_IRQ_STATUS) +#define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val) +#define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP) +#define bfin_write_DMA19_PERIPHERAL_MAP(val) bfin_write16(DMA19_PERIPHERAL_MAP, val) +#define bfin_read_DMA19_CURR_X_COUNT() bfin_read16(DMA19_CURR_X_COUNT) +#define bfin_write_DMA19_CURR_X_COUNT(val) bfin_write16(DMA19_CURR_X_COUNT, val) +#define bfin_read_DMA19_CURR_Y_COUNT() bfin_read16(DMA19_CURR_Y_COUNT) +#define bfin_write_DMA19_CURR_Y_COUNT(val) bfin_write16(DMA19_CURR_Y_COUNT, val) + +/* DMA Channel 20 Registers */ + +#define bfin_read_DMA20_NEXT_DESC_PTR() bfin_read32(DMA20_NEXT_DESC_PTR) +#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR, val) +#define bfin_read_DMA20_START_ADDR() bfin_read32(DMA20_START_ADDR) +#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR, val) +#define bfin_read_DMA20_CONFIG() bfin_read16(DMA20_CONFIG) +#define bfin_write_DMA20_CONFIG(val) bfin_write16(DMA20_CONFIG, val) +#define bfin_read_DMA20_X_COUNT() bfin_read16(DMA20_X_COUNT) +#define bfin_write_DMA20_X_COUNT(val) bfin_write16(DMA20_X_COUNT, val) +#define bfin_read_DMA20_X_MODIFY() bfin_read16(DMA20_X_MODIFY) +#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY, val) +#define bfin_read_DMA20_Y_COUNT() bfin_read16(DMA20_Y_COUNT) +#define bfin_write_DMA20_Y_COUNT(val) bfin_write16(DMA20_Y_COUNT, val) +#define bfin_read_DMA20_Y_MODIFY() bfin_read16(DMA20_Y_MODIFY) +#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY, val) +#define bfin_read_DMA20_CURR_DESC_PTR() bfin_read32(DMA20_CURR_DESC_PTR) +#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR, val) +#define bfin_read_DMA20_CURR_ADDR() bfin_read32(DMA20_CURR_ADDR) +#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR, val) +#define bfin_read_DMA20_IRQ_STATUS() bfin_read16(DMA20_IRQ_STATUS) +#define bfin_write_DMA20_IRQ_STATUS(val) bfin_write16(DMA20_IRQ_STATUS, val) +#define bfin_read_DMA20_PERIPHERAL_MAP() bfin_read16(DMA20_PERIPHERAL_MAP) +#define bfin_write_DMA20_PERIPHERAL_MAP(val) bfin_write16(DMA20_PERIPHERAL_MAP, val) +#define bfin_read_DMA20_CURR_X_COUNT() bfin_read16(DMA20_CURR_X_COUNT) +#define bfin_write_DMA20_CURR_X_COUNT(val) bfin_write16(DMA20_CURR_X_COUNT, val) +#define bfin_read_DMA20_CURR_Y_COUNT() bfin_read16(DMA20_CURR_Y_COUNT) +#define bfin_write_DMA20_CURR_Y_COUNT(val) bfin_write16(DMA20_CURR_Y_COUNT, val) + +/* DMA Channel 21 Registers */ + +#define bfin_read_DMA21_NEXT_DESC_PTR() bfin_read32(DMA21_NEXT_DESC_PTR) +#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR, val) +#define bfin_read_DMA21_START_ADDR() bfin_read32(DMA21_START_ADDR) +#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR, val) +#define bfin_read_DMA21_CONFIG() bfin_read16(DMA21_CONFIG) +#define bfin_write_DMA21_CONFIG(val) bfin_write16(DMA21_CONFIG, val) +#define bfin_read_DMA21_X_COUNT() bfin_read16(DMA21_X_COUNT) +#define bfin_write_DMA21_X_COUNT(val) bfin_write16(DMA21_X_COUNT, val) +#define bfin_read_DMA21_X_MODIFY() bfin_read16(DMA21_X_MODIFY) +#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY, val) +#define bfin_read_DMA21_Y_COUNT() bfin_read16(DMA21_Y_COUNT) +#define bfin_write_DMA21_Y_COUNT(val) bfin_write16(DMA21_Y_COUNT, val) +#define bfin_read_DMA21_Y_MODIFY() bfin_read16(DMA21_Y_MODIFY) +#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY, val) +#define bfin_read_DMA21_CURR_DESC_PTR() bfin_read32(DMA21_CURR_DESC_PTR) +#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR, val) +#define bfin_read_DMA21_CURR_ADDR() bfin_read32(DMA21_CURR_ADDR) +#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR, val) +#define bfin_read_DMA21_IRQ_STATUS() bfin_read16(DMA21_IRQ_STATUS) +#define bfin_write_DMA21_IRQ_STATUS(val) bfin_write16(DMA21_IRQ_STATUS, val) +#define bfin_read_DMA21_PERIPHERAL_MAP() bfin_read16(DMA21_PERIPHERAL_MAP) +#define bfin_write_DMA21_PERIPHERAL_MAP(val) bfin_write16(DMA21_PERIPHERAL_MAP, val) +#define bfin_read_DMA21_CURR_X_COUNT() bfin_read16(DMA21_CURR_X_COUNT) +#define bfin_write_DMA21_CURR_X_COUNT(val) bfin_write16(DMA21_CURR_X_COUNT, val) +#define bfin_read_DMA21_CURR_Y_COUNT() bfin_read16(DMA21_CURR_Y_COUNT) +#define bfin_write_DMA21_CURR_Y_COUNT(val) bfin_write16(DMA21_CURR_Y_COUNT, val) + +/* DMA Channel 22 Registers */ + +#define bfin_read_DMA22_NEXT_DESC_PTR() bfin_read32(DMA22_NEXT_DESC_PTR) +#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR, val) +#define bfin_read_DMA22_START_ADDR() bfin_read32(DMA22_START_ADDR) +#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR, val) +#define bfin_read_DMA22_CONFIG() bfin_read16(DMA22_CONFIG) +#define bfin_write_DMA22_CONFIG(val) bfin_write16(DMA22_CONFIG, val) +#define bfin_read_DMA22_X_COUNT() bfin_read16(DMA22_X_COUNT) +#define bfin_write_DMA22_X_COUNT(val) bfin_write16(DMA22_X_COUNT, val) +#define bfin_read_DMA22_X_MODIFY() bfin_read16(DMA22_X_MODIFY) +#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY, val) +#define bfin_read_DMA22_Y_COUNT() bfin_read16(DMA22_Y_COUNT) +#define bfin_write_DMA22_Y_COUNT(val) bfin_write16(DMA22_Y_COUNT, val) +#define bfin_read_DMA22_Y_MODIFY() bfin_read16(DMA22_Y_MODIFY) +#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY, val) +#define bfin_read_DMA22_CURR_DESC_PTR() bfin_read32(DMA22_CURR_DESC_PTR) +#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR, val) +#define bfin_read_DMA22_CURR_ADDR() bfin_read32(DMA22_CURR_ADDR) +#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR, val) +#define bfin_read_DMA22_IRQ_STATUS() bfin_read16(DMA22_IRQ_STATUS) +#define bfin_write_DMA22_IRQ_STATUS(val) bfin_write16(DMA22_IRQ_STATUS, val) +#define bfin_read_DMA22_PERIPHERAL_MAP() bfin_read16(DMA22_PERIPHERAL_MAP) +#define bfin_write_DMA22_PERIPHERAL_MAP(val) bfin_write16(DMA22_PERIPHERAL_MAP, val) +#define bfin_read_DMA22_CURR_X_COUNT() bfin_read16(DMA22_CURR_X_COUNT) +#define bfin_write_DMA22_CURR_X_COUNT(val) bfin_write16(DMA22_CURR_X_COUNT, val) +#define bfin_read_DMA22_CURR_Y_COUNT() bfin_read16(DMA22_CURR_Y_COUNT) +#define bfin_write_DMA22_CURR_Y_COUNT(val) bfin_write16(DMA22_CURR_Y_COUNT, val) + +/* DMA Channel 23 Registers */ + +#define bfin_read_DMA23_NEXT_DESC_PTR() bfin_read32(DMA23_NEXT_DESC_PTR) +#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR, val) +#define bfin_read_DMA23_START_ADDR() bfin_read32(DMA23_START_ADDR) +#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR, val) +#define bfin_read_DMA23_CONFIG() bfin_read16(DMA23_CONFIG) +#define bfin_write_DMA23_CONFIG(val) bfin_write16(DMA23_CONFIG, val) +#define bfin_read_DMA23_X_COUNT() bfin_read16(DMA23_X_COUNT) +#define bfin_write_DMA23_X_COUNT(val) bfin_write16(DMA23_X_COUNT, val) +#define bfin_read_DMA23_X_MODIFY() bfin_read16(DMA23_X_MODIFY) +#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY, val) +#define bfin_read_DMA23_Y_COUNT() bfin_read16(DMA23_Y_COUNT) +#define bfin_write_DMA23_Y_COUNT(val) bfin_write16(DMA23_Y_COUNT, val) +#define bfin_read_DMA23_Y_MODIFY() bfin_read16(DMA23_Y_MODIFY) +#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY, val) +#define bfin_read_DMA23_CURR_DESC_PTR() bfin_read32(DMA23_CURR_DESC_PTR) +#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR, val) +#define bfin_read_DMA23_CURR_ADDR() bfin_read32(DMA23_CURR_ADDR) +#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR, val) +#define bfin_read_DMA23_IRQ_STATUS() bfin_read16(DMA23_IRQ_STATUS) +#define bfin_write_DMA23_IRQ_STATUS(val) bfin_write16(DMA23_IRQ_STATUS, val) +#define bfin_read_DMA23_PERIPHERAL_MAP() bfin_read16(DMA23_PERIPHERAL_MAP) +#define bfin_write_DMA23_PERIPHERAL_MAP(val) bfin_write16(DMA23_PERIPHERAL_MAP, val) +#define bfin_read_DMA23_CURR_X_COUNT() bfin_read16(DMA23_CURR_X_COUNT) +#define bfin_write_DMA23_CURR_X_COUNT(val) bfin_write16(DMA23_CURR_X_COUNT, val) +#define bfin_read_DMA23_CURR_Y_COUNT() bfin_read16(DMA23_CURR_Y_COUNT) +#define bfin_write_DMA23_CURR_Y_COUNT(val) bfin_write16(DMA23_CURR_Y_COUNT, val) + +/* MDMA Stream 2 Registers */ + +#define bfin_read_MDMA_D2_NEXT_DESC_PTR() bfin_read32(MDMA_D2_NEXT_DESC_PTR) +#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D2_START_ADDR() bfin_read32(MDMA_D2_START_ADDR) +#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR, val) +#define bfin_read_MDMA_D2_CONFIG() bfin_read16(MDMA_D2_CONFIG) +#define bfin_write_MDMA_D2_CONFIG(val) bfin_write16(MDMA_D2_CONFIG, val) +#define bfin_read_MDMA_D2_X_COUNT() bfin_read16(MDMA_D2_X_COUNT) +#define bfin_write_MDMA_D2_X_COUNT(val) bfin_write16(MDMA_D2_X_COUNT, val) +#define bfin_read_MDMA_D2_X_MODIFY() bfin_read16(MDMA_D2_X_MODIFY) +#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY, val) +#define bfin_read_MDMA_D2_Y_COUNT() bfin_read16(MDMA_D2_Y_COUNT) +#define bfin_write_MDMA_D2_Y_COUNT(val) bfin_write16(MDMA_D2_Y_COUNT, val) +#define bfin_read_MDMA_D2_Y_MODIFY() bfin_read16(MDMA_D2_Y_MODIFY) +#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY, val) +#define bfin_read_MDMA_D2_CURR_DESC_PTR() bfin_read32(MDMA_D2_CURR_DESC_PTR) +#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D2_CURR_ADDR() bfin_read32(MDMA_D2_CURR_ADDR) +#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR, val) +#define bfin_read_MDMA_D2_IRQ_STATUS() bfin_read16(MDMA_D2_IRQ_STATUS) +#define bfin_write_MDMA_D2_IRQ_STATUS(val) bfin_write16(MDMA_D2_IRQ_STATUS, val) +#define bfin_read_MDMA_D2_PERIPHERAL_MAP() bfin_read16(MDMA_D2_PERIPHERAL_MAP) +#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val) bfin_write16(MDMA_D2_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D2_CURR_X_COUNT() bfin_read16(MDMA_D2_CURR_X_COUNT) +#define bfin_write_MDMA_D2_CURR_X_COUNT(val) bfin_write16(MDMA_D2_CURR_X_COUNT, val) +#define bfin_read_MDMA_D2_CURR_Y_COUNT() bfin_read16(MDMA_D2_CURR_Y_COUNT) +#define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S2_NEXT_DESC_PTR() bfin_read32(MDMA_S2_NEXT_DESC_PTR) +#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S2_START_ADDR() bfin_read32(MDMA_S2_START_ADDR) +#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR, val) +#define bfin_read_MDMA_S2_CONFIG() bfin_read16(MDMA_S2_CONFIG) +#define bfin_write_MDMA_S2_CONFIG(val) bfin_write16(MDMA_S2_CONFIG, val) +#define bfin_read_MDMA_S2_X_COUNT() bfin_read16(MDMA_S2_X_COUNT) +#define bfin_write_MDMA_S2_X_COUNT(val) bfin_write16(MDMA_S2_X_COUNT, val) +#define bfin_read_MDMA_S2_X_MODIFY() bfin_read16(MDMA_S2_X_MODIFY) +#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY, val) +#define bfin_read_MDMA_S2_Y_COUNT() bfin_read16(MDMA_S2_Y_COUNT) +#define bfin_write_MDMA_S2_Y_COUNT(val) bfin_write16(MDMA_S2_Y_COUNT, val) +#define bfin_read_MDMA_S2_Y_MODIFY() bfin_read16(MDMA_S2_Y_MODIFY) +#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY, val) +#define bfin_read_MDMA_S2_CURR_DESC_PTR() bfin_read32(MDMA_S2_CURR_DESC_PTR) +#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S2_CURR_ADDR() bfin_read32(MDMA_S2_CURR_ADDR) +#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR, val) +#define bfin_read_MDMA_S2_IRQ_STATUS() bfin_read16(MDMA_S2_IRQ_STATUS) +#define bfin_write_MDMA_S2_IRQ_STATUS(val) bfin_write16(MDMA_S2_IRQ_STATUS, val) +#define bfin_read_MDMA_S2_PERIPHERAL_MAP() bfin_read16(MDMA_S2_PERIPHERAL_MAP) +#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val) bfin_write16(MDMA_S2_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S2_CURR_X_COUNT() bfin_read16(MDMA_S2_CURR_X_COUNT) +#define bfin_write_MDMA_S2_CURR_X_COUNT(val) bfin_write16(MDMA_S2_CURR_X_COUNT, val) +#define bfin_read_MDMA_S2_CURR_Y_COUNT() bfin_read16(MDMA_S2_CURR_Y_COUNT) +#define bfin_write_MDMA_S2_CURR_Y_COUNT(val) bfin_write16(MDMA_S2_CURR_Y_COUNT, val) + +/* MDMA Stream 3 Registers */ + +#define bfin_read_MDMA_D3_NEXT_DESC_PTR() bfin_read32(MDMA_D3_NEXT_DESC_PTR) +#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D3_START_ADDR() bfin_read32(MDMA_D3_START_ADDR) +#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR, val) +#define bfin_read_MDMA_D3_CONFIG() bfin_read16(MDMA_D3_CONFIG) +#define bfin_write_MDMA_D3_CONFIG(val) bfin_write16(MDMA_D3_CONFIG, val) +#define bfin_read_MDMA_D3_X_COUNT() bfin_read16(MDMA_D3_X_COUNT) +#define bfin_write_MDMA_D3_X_COUNT(val) bfin_write16(MDMA_D3_X_COUNT, val) +#define bfin_read_MDMA_D3_X_MODIFY() bfin_read16(MDMA_D3_X_MODIFY) +#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY, val) +#define bfin_read_MDMA_D3_Y_COUNT() bfin_read16(MDMA_D3_Y_COUNT) +#define bfin_write_MDMA_D3_Y_COUNT(val) bfin_write16(MDMA_D3_Y_COUNT, val) +#define bfin_read_MDMA_D3_Y_MODIFY() bfin_read16(MDMA_D3_Y_MODIFY) +#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY, val) +#define bfin_read_MDMA_D3_CURR_DESC_PTR() bfin_read32(MDMA_D3_CURR_DESC_PTR) +#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D3_CURR_ADDR() bfin_read32(MDMA_D3_CURR_ADDR) +#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR, val) +#define bfin_read_MDMA_D3_IRQ_STATUS() bfin_read16(MDMA_D3_IRQ_STATUS) +#define bfin_write_MDMA_D3_IRQ_STATUS(val) bfin_write16(MDMA_D3_IRQ_STATUS, val) +#define bfin_read_MDMA_D3_PERIPHERAL_MAP() bfin_read16(MDMA_D3_PERIPHERAL_MAP) +#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val) bfin_write16(MDMA_D3_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D3_CURR_X_COUNT() bfin_read16(MDMA_D3_CURR_X_COUNT) +#define bfin_write_MDMA_D3_CURR_X_COUNT(val) bfin_write16(MDMA_D3_CURR_X_COUNT, val) +#define bfin_read_MDMA_D3_CURR_Y_COUNT() bfin_read16(MDMA_D3_CURR_Y_COUNT) +#define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S3_NEXT_DESC_PTR() bfin_read32(MDMA_S3_NEXT_DESC_PTR) +#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S3_START_ADDR() bfin_read32(MDMA_S3_START_ADDR) +#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR, val) +#define bfin_read_MDMA_S3_CONFIG() bfin_read16(MDMA_S3_CONFIG) +#define bfin_write_MDMA_S3_CONFIG(val) bfin_write16(MDMA_S3_CONFIG, val) +#define bfin_read_MDMA_S3_X_COUNT() bfin_read16(MDMA_S3_X_COUNT) +#define bfin_write_MDMA_S3_X_COUNT(val) bfin_write16(MDMA_S3_X_COUNT, val) +#define bfin_read_MDMA_S3_X_MODIFY() bfin_read16(MDMA_S3_X_MODIFY) +#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY, val) +#define bfin_read_MDMA_S3_Y_COUNT() bfin_read16(MDMA_S3_Y_COUNT) +#define bfin_write_MDMA_S3_Y_COUNT(val) bfin_write16(MDMA_S3_Y_COUNT, val) +#define bfin_read_MDMA_S3_Y_MODIFY() bfin_read16(MDMA_S3_Y_MODIFY) +#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY, val) +#define bfin_read_MDMA_S3_CURR_DESC_PTR() bfin_read32(MDMA_S3_CURR_DESC_PTR) +#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S3_CURR_ADDR() bfin_read32(MDMA_S3_CURR_ADDR) +#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR, val) +#define bfin_read_MDMA_S3_IRQ_STATUS() bfin_read16(MDMA_S3_IRQ_STATUS) +#define bfin_write_MDMA_S3_IRQ_STATUS(val) bfin_write16(MDMA_S3_IRQ_STATUS, val) +#define bfin_read_MDMA_S3_PERIPHERAL_MAP() bfin_read16(MDMA_S3_PERIPHERAL_MAP) +#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val) bfin_write16(MDMA_S3_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S3_CURR_X_COUNT() bfin_read16(MDMA_S3_CURR_X_COUNT) +#define bfin_write_MDMA_S3_CURR_X_COUNT(val) bfin_write16(MDMA_S3_CURR_X_COUNT, val) +#define bfin_read_MDMA_S3_CURR_Y_COUNT() bfin_read16(MDMA_S3_CURR_Y_COUNT) +#define bfin_write_MDMA_S3_CURR_Y_COUNT(val) bfin_write16(MDMA_S3_CURR_Y_COUNT, val) + +/* UART1 Registers */ + +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_IER_SET() bfin_read16(UART1_IER_SET) +#define bfin_write_UART1_IER_SET(val) bfin_write16(UART1_IER_SET, val) +#define bfin_read_UART1_IER_CLEAR() bfin_read16(UART1_IER_CLEAR) +#define bfin_write_UART1_IER_CLEAR(val) bfin_write16(UART1_IER_CLEAR, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) + +/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ + +/* SPI1 Registers */ + +#define bfin_read_SPI1_CTL() bfin_read16(SPI1_CTL) +#define bfin_write_SPI1_CTL(val) bfin_write16(SPI1_CTL, val) +#define bfin_read_SPI1_FLG() bfin_read16(SPI1_FLG) +#define bfin_write_SPI1_FLG(val) bfin_write16(SPI1_FLG, val) +#define bfin_read_SPI1_STAT() bfin_read16(SPI1_STAT) +#define bfin_write_SPI1_STAT(val) bfin_write16(SPI1_STAT, val) +#define bfin_read_SPI1_TDBR() bfin_read16(SPI1_TDBR) +#define bfin_write_SPI1_TDBR(val) bfin_write16(SPI1_TDBR, val) +#define bfin_read_SPI1_RDBR() bfin_read16(SPI1_RDBR) +#define bfin_write_SPI1_RDBR(val) bfin_write16(SPI1_RDBR, val) +#define bfin_read_SPI1_BAUD() bfin_read16(SPI1_BAUD) +#define bfin_write_SPI1_BAUD(val) bfin_write16(SPI1_BAUD, val) +#define bfin_read_SPI1_SHADOW() bfin_read16(SPI1_SHADOW) +#define bfin_write_SPI1_SHADOW(val) bfin_write16(SPI1_SHADOW, val) + +/* SPORT2 Registers */ + +#define bfin_read_SPORT2_TCR1() bfin_read16(SPORT2_TCR1) +#define bfin_write_SPORT2_TCR1(val) bfin_write16(SPORT2_TCR1, val) +#define bfin_read_SPORT2_TCR2() bfin_read16(SPORT2_TCR2) +#define bfin_write_SPORT2_TCR2(val) bfin_write16(SPORT2_TCR2, val) +#define bfin_read_SPORT2_TCLKDIV() bfin_read16(SPORT2_TCLKDIV) +#define bfin_write_SPORT2_TCLKDIV(val) bfin_write16(SPORT2_TCLKDIV, val) +#define bfin_read_SPORT2_TFSDIV() bfin_read16(SPORT2_TFSDIV) +#define bfin_write_SPORT2_TFSDIV(val) bfin_write16(SPORT2_TFSDIV, val) +#define bfin_read_SPORT2_TX() bfin_read32(SPORT2_TX) +#define bfin_write_SPORT2_TX(val) bfin_write32(SPORT2_TX, val) +#define bfin_read_SPORT2_RX() bfin_read32(SPORT2_RX) +#define bfin_write_SPORT2_RX(val) bfin_write32(SPORT2_RX, val) +#define bfin_read_SPORT2_RCR1() bfin_read16(SPORT2_RCR1) +#define bfin_write_SPORT2_RCR1(val) bfin_write16(SPORT2_RCR1, val) +#define bfin_read_SPORT2_RCR2() bfin_read16(SPORT2_RCR2) +#define bfin_write_SPORT2_RCR2(val) bfin_write16(SPORT2_RCR2, val) +#define bfin_read_SPORT2_RCLKDIV() bfin_read16(SPORT2_RCLKDIV) +#define bfin_write_SPORT2_RCLKDIV(val) bfin_write16(SPORT2_RCLKDIV, val) +#define bfin_read_SPORT2_RFSDIV() bfin_read16(SPORT2_RFSDIV) +#define bfin_write_SPORT2_RFSDIV(val) bfin_write16(SPORT2_RFSDIV, val) +#define bfin_read_SPORT2_STAT() bfin_read16(SPORT2_STAT) +#define bfin_write_SPORT2_STAT(val) bfin_write16(SPORT2_STAT, val) +#define bfin_read_SPORT2_CHNL() bfin_read16(SPORT2_CHNL) +#define bfin_write_SPORT2_CHNL(val) bfin_write16(SPORT2_CHNL, val) +#define bfin_read_SPORT2_MCMC1() bfin_read16(SPORT2_MCMC1) +#define bfin_write_SPORT2_MCMC1(val) bfin_write16(SPORT2_MCMC1, val) +#define bfin_read_SPORT2_MCMC2() bfin_read16(SPORT2_MCMC2) +#define bfin_write_SPORT2_MCMC2(val) bfin_write16(SPORT2_MCMC2, val) +#define bfin_read_SPORT2_MTCS0() bfin_read32(SPORT2_MTCS0) +#define bfin_write_SPORT2_MTCS0(val) bfin_write32(SPORT2_MTCS0, val) +#define bfin_read_SPORT2_MTCS1() bfin_read32(SPORT2_MTCS1) +#define bfin_write_SPORT2_MTCS1(val) bfin_write32(SPORT2_MTCS1, val) +#define bfin_read_SPORT2_MTCS2() bfin_read32(SPORT2_MTCS2) +#define bfin_write_SPORT2_MTCS2(val) bfin_write32(SPORT2_MTCS2, val) +#define bfin_read_SPORT2_MTCS3() bfin_read32(SPORT2_MTCS3) +#define bfin_write_SPORT2_MTCS3(val) bfin_write32(SPORT2_MTCS3, val) +#define bfin_read_SPORT2_MRCS0() bfin_read32(SPORT2_MRCS0) +#define bfin_write_SPORT2_MRCS0(val) bfin_write32(SPORT2_MRCS0, val) +#define bfin_read_SPORT2_MRCS1() bfin_read32(SPORT2_MRCS1) +#define bfin_write_SPORT2_MRCS1(val) bfin_write32(SPORT2_MRCS1, val) +#define bfin_read_SPORT2_MRCS2() bfin_read32(SPORT2_MRCS2) +#define bfin_write_SPORT2_MRCS2(val) bfin_write32(SPORT2_MRCS2, val) +#define bfin_read_SPORT2_MRCS3() bfin_read32(SPORT2_MRCS3) +#define bfin_write_SPORT2_MRCS3(val) bfin_write32(SPORT2_MRCS3, val) + +/* SPORT3 Registers */ + +#define bfin_read_SPORT3_TCR1() bfin_read16(SPORT3_TCR1) +#define bfin_write_SPORT3_TCR1(val) bfin_write16(SPORT3_TCR1, val) +#define bfin_read_SPORT3_TCR2() bfin_read16(SPORT3_TCR2) +#define bfin_write_SPORT3_TCR2(val) bfin_write16(SPORT3_TCR2, val) +#define bfin_read_SPORT3_TCLKDIV() bfin_read16(SPORT3_TCLKDIV) +#define bfin_write_SPORT3_TCLKDIV(val) bfin_write16(SPORT3_TCLKDIV, val) +#define bfin_read_SPORT3_TFSDIV() bfin_read16(SPORT3_TFSDIV) +#define bfin_write_SPORT3_TFSDIV(val) bfin_write16(SPORT3_TFSDIV, val) +#define bfin_read_SPORT3_TX() bfin_read32(SPORT3_TX) +#define bfin_write_SPORT3_TX(val) bfin_write32(SPORT3_TX, val) +#define bfin_read_SPORT3_RX() bfin_read32(SPORT3_RX) +#define bfin_write_SPORT3_RX(val) bfin_write32(SPORT3_RX, val) +#define bfin_read_SPORT3_RCR1() bfin_read16(SPORT3_RCR1) +#define bfin_write_SPORT3_RCR1(val) bfin_write16(SPORT3_RCR1, val) +#define bfin_read_SPORT3_RCR2() bfin_read16(SPORT3_RCR2) +#define bfin_write_SPORT3_RCR2(val) bfin_write16(SPORT3_RCR2, val) +#define bfin_read_SPORT3_RCLKDIV() bfin_read16(SPORT3_RCLKDIV) +#define bfin_write_SPORT3_RCLKDIV(val) bfin_write16(SPORT3_RCLKDIV, val) +#define bfin_read_SPORT3_RFSDIV() bfin_read16(SPORT3_RFSDIV) +#define bfin_write_SPORT3_RFSDIV(val) bfin_write16(SPORT3_RFSDIV, val) +#define bfin_read_SPORT3_STAT() bfin_read16(SPORT3_STAT) +#define bfin_write_SPORT3_STAT(val) bfin_write16(SPORT3_STAT, val) +#define bfin_read_SPORT3_CHNL() bfin_read16(SPORT3_CHNL) +#define bfin_write_SPORT3_CHNL(val) bfin_write16(SPORT3_CHNL, val) +#define bfin_read_SPORT3_MCMC1() bfin_read16(SPORT3_MCMC1) +#define bfin_write_SPORT3_MCMC1(val) bfin_write16(SPORT3_MCMC1, val) +#define bfin_read_SPORT3_MCMC2() bfin_read16(SPORT3_MCMC2) +#define bfin_write_SPORT3_MCMC2(val) bfin_write16(SPORT3_MCMC2, val) +#define bfin_read_SPORT3_MTCS0() bfin_read32(SPORT3_MTCS0) +#define bfin_write_SPORT3_MTCS0(val) bfin_write32(SPORT3_MTCS0, val) +#define bfin_read_SPORT3_MTCS1() bfin_read32(SPORT3_MTCS1) +#define bfin_write_SPORT3_MTCS1(val) bfin_write32(SPORT3_MTCS1, val) +#define bfin_read_SPORT3_MTCS2() bfin_read32(SPORT3_MTCS2) +#define bfin_write_SPORT3_MTCS2(val) bfin_write32(SPORT3_MTCS2, val) +#define bfin_read_SPORT3_MTCS3() bfin_read32(SPORT3_MTCS3) +#define bfin_write_SPORT3_MTCS3(val) bfin_write32(SPORT3_MTCS3, val) +#define bfin_read_SPORT3_MRCS0() bfin_read32(SPORT3_MRCS0) +#define bfin_write_SPORT3_MRCS0(val) bfin_write32(SPORT3_MRCS0, val) +#define bfin_read_SPORT3_MRCS1() bfin_read32(SPORT3_MRCS1) +#define bfin_write_SPORT3_MRCS1(val) bfin_write32(SPORT3_MRCS1, val) +#define bfin_read_SPORT3_MRCS2() bfin_read32(SPORT3_MRCS2) +#define bfin_write_SPORT3_MRCS2(val) bfin_write32(SPORT3_MRCS2, val) +#define bfin_read_SPORT3_MRCS3() bfin_read32(SPORT3_MRCS3) +#define bfin_write_SPORT3_MRCS3(val) bfin_write32(SPORT3_MRCS3, val) + +/* EPPI2 Registers */ + +#define bfin_read_EPPI2_STATUS() bfin_read16(EPPI2_STATUS) +#define bfin_write_EPPI2_STATUS(val) bfin_write16(EPPI2_STATUS, val) +#define bfin_read_EPPI2_HCOUNT() bfin_read16(EPPI2_HCOUNT) +#define bfin_write_EPPI2_HCOUNT(val) bfin_write16(EPPI2_HCOUNT, val) +#define bfin_read_EPPI2_HDELAY() bfin_read16(EPPI2_HDELAY) +#define bfin_write_EPPI2_HDELAY(val) bfin_write16(EPPI2_HDELAY, val) +#define bfin_read_EPPI2_VCOUNT() bfin_read16(EPPI2_VCOUNT) +#define bfin_write_EPPI2_VCOUNT(val) bfin_write16(EPPI2_VCOUNT, val) +#define bfin_read_EPPI2_VDELAY() bfin_read16(EPPI2_VDELAY) +#define bfin_write_EPPI2_VDELAY(val) bfin_write16(EPPI2_VDELAY, val) +#define bfin_read_EPPI2_FRAME() bfin_read16(EPPI2_FRAME) +#define bfin_write_EPPI2_FRAME(val) bfin_write16(EPPI2_FRAME, val) +#define bfin_read_EPPI2_LINE() bfin_read16(EPPI2_LINE) +#define bfin_write_EPPI2_LINE(val) bfin_write16(EPPI2_LINE, val) +#define bfin_read_EPPI2_CLKDIV() bfin_read16(EPPI2_CLKDIV) +#define bfin_write_EPPI2_CLKDIV(val) bfin_write16(EPPI2_CLKDIV, val) +#define bfin_read_EPPI2_CONTROL() bfin_read32(EPPI2_CONTROL) +#define bfin_write_EPPI2_CONTROL(val) bfin_write32(EPPI2_CONTROL, val) +#define bfin_read_EPPI2_FS1W_HBL() bfin_read32(EPPI2_FS1W_HBL) +#define bfin_write_EPPI2_FS1W_HBL(val) bfin_write32(EPPI2_FS1W_HBL, val) +#define bfin_read_EPPI2_FS1P_AVPL() bfin_read32(EPPI2_FS1P_AVPL) +#define bfin_write_EPPI2_FS1P_AVPL(val) bfin_write32(EPPI2_FS1P_AVPL, val) +#define bfin_read_EPPI2_FS2W_LVB() bfin_read32(EPPI2_FS2W_LVB) +#define bfin_write_EPPI2_FS2W_LVB(val) bfin_write32(EPPI2_FS2W_LVB, val) +#define bfin_read_EPPI2_FS2P_LAVF() bfin_read32(EPPI2_FS2P_LAVF) +#define bfin_write_EPPI2_FS2P_LAVF(val) bfin_write32(EPPI2_FS2P_LAVF, val) +#define bfin_read_EPPI2_CLIP() bfin_read32(EPPI2_CLIP) +#define bfin_write_EPPI2_CLIP(val) bfin_write32(EPPI2_CLIP, val) + +/* CAN Controller 0 Config 1 Registers */ + +#define bfin_read_CAN0_MC1() bfin_read16(CAN0_MC1) +#define bfin_write_CAN0_MC1(val) bfin_write16(CAN0_MC1, val) +#define bfin_read_CAN0_MD1() bfin_read16(CAN0_MD1) +#define bfin_write_CAN0_MD1(val) bfin_write16(CAN0_MD1, val) +#define bfin_read_CAN0_TRS1() bfin_read16(CAN0_TRS1) +#define bfin_write_CAN0_TRS1(val) bfin_write16(CAN0_TRS1, val) +#define bfin_read_CAN0_TRR1() bfin_read16(CAN0_TRR1) +#define bfin_write_CAN0_TRR1(val) bfin_write16(CAN0_TRR1, val) +#define bfin_read_CAN0_TA1() bfin_read16(CAN0_TA1) +#define bfin_write_CAN0_TA1(val) bfin_write16(CAN0_TA1, val) +#define bfin_read_CAN0_AA1() bfin_read16(CAN0_AA1) +#define bfin_write_CAN0_AA1(val) bfin_write16(CAN0_AA1, val) +#define bfin_read_CAN0_RMP1() bfin_read16(CAN0_RMP1) +#define bfin_write_CAN0_RMP1(val) bfin_write16(CAN0_RMP1, val) +#define bfin_read_CAN0_RML1() bfin_read16(CAN0_RML1) +#define bfin_write_CAN0_RML1(val) bfin_write16(CAN0_RML1, val) +#define bfin_read_CAN0_MBTIF1() bfin_read16(CAN0_MBTIF1) +#define bfin_write_CAN0_MBTIF1(val) bfin_write16(CAN0_MBTIF1, val) +#define bfin_read_CAN0_MBRIF1() bfin_read16(CAN0_MBRIF1) +#define bfin_write_CAN0_MBRIF1(val) bfin_write16(CAN0_MBRIF1, val) +#define bfin_read_CAN0_MBIM1() bfin_read16(CAN0_MBIM1) +#define bfin_write_CAN0_MBIM1(val) bfin_write16(CAN0_MBIM1, val) +#define bfin_read_CAN0_RFH1() bfin_read16(CAN0_RFH1) +#define bfin_write_CAN0_RFH1(val) bfin_write16(CAN0_RFH1, val) +#define bfin_read_CAN0_OPSS1() bfin_read16(CAN0_OPSS1) +#define bfin_write_CAN0_OPSS1(val) bfin_write16(CAN0_OPSS1, val) + +/* CAN Controller 0 Config 2 Registers */ + +#define bfin_read_CAN0_MC2() bfin_read16(CAN0_MC2) +#define bfin_write_CAN0_MC2(val) bfin_write16(CAN0_MC2, val) +#define bfin_read_CAN0_MD2() bfin_read16(CAN0_MD2) +#define bfin_write_CAN0_MD2(val) bfin_write16(CAN0_MD2, val) +#define bfin_read_CAN0_TRS2() bfin_read16(CAN0_TRS2) +#define bfin_write_CAN0_TRS2(val) bfin_write16(CAN0_TRS2, val) +#define bfin_read_CAN0_TRR2() bfin_read16(CAN0_TRR2) +#define bfin_write_CAN0_TRR2(val) bfin_write16(CAN0_TRR2, val) +#define bfin_read_CAN0_TA2() bfin_read16(CAN0_TA2) +#define bfin_write_CAN0_TA2(val) bfin_write16(CAN0_TA2, val) +#define bfin_read_CAN0_AA2() bfin_read16(CAN0_AA2) +#define bfin_write_CAN0_AA2(val) bfin_write16(CAN0_AA2, val) +#define bfin_read_CAN0_RMP2() bfin_read16(CAN0_RMP2) +#define bfin_write_CAN0_RMP2(val) bfin_write16(CAN0_RMP2, val) +#define bfin_read_CAN0_RML2() bfin_read16(CAN0_RML2) +#define bfin_write_CAN0_RML2(val) bfin_write16(CAN0_RML2, val) +#define bfin_read_CAN0_MBTIF2() bfin_read16(CAN0_MBTIF2) +#define bfin_write_CAN0_MBTIF2(val) bfin_write16(CAN0_MBTIF2, val) +#define bfin_read_CAN0_MBRIF2() bfin_read16(CAN0_MBRIF2) +#define bfin_write_CAN0_MBRIF2(val) bfin_write16(CAN0_MBRIF2, val) +#define bfin_read_CAN0_MBIM2() bfin_read16(CAN0_MBIM2) +#define bfin_write_CAN0_MBIM2(val) bfin_write16(CAN0_MBIM2, val) +#define bfin_read_CAN0_RFH2() bfin_read16(CAN0_RFH2) +#define bfin_write_CAN0_RFH2(val) bfin_write16(CAN0_RFH2, val) +#define bfin_read_CAN0_OPSS2() bfin_read16(CAN0_OPSS2) +#define bfin_write_CAN0_OPSS2(val) bfin_write16(CAN0_OPSS2, val) + +/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN0_CLOCK() bfin_read16(CAN0_CLOCK) +#define bfin_write_CAN0_CLOCK(val) bfin_write16(CAN0_CLOCK, val) +#define bfin_read_CAN0_TIMING() bfin_read16(CAN0_TIMING) +#define bfin_write_CAN0_TIMING(val) bfin_write16(CAN0_TIMING, val) +#define bfin_read_CAN0_DEBUG() bfin_read16(CAN0_DEBUG) +#define bfin_write_CAN0_DEBUG(val) bfin_write16(CAN0_DEBUG, val) +#define bfin_read_CAN0_STATUS() bfin_read16(CAN0_STATUS) +#define bfin_write_CAN0_STATUS(val) bfin_write16(CAN0_STATUS, val) +#define bfin_read_CAN0_CEC() bfin_read16(CAN0_CEC) +#define bfin_write_CAN0_CEC(val) bfin_write16(CAN0_CEC, val) +#define bfin_read_CAN0_GIS() bfin_read16(CAN0_GIS) +#define bfin_write_CAN0_GIS(val) bfin_write16(CAN0_GIS, val) +#define bfin_read_CAN0_GIM() bfin_read16(CAN0_GIM) +#define bfin_write_CAN0_GIM(val) bfin_write16(CAN0_GIM, val) +#define bfin_read_CAN0_GIF() bfin_read16(CAN0_GIF) +#define bfin_write_CAN0_GIF(val) bfin_write16(CAN0_GIF, val) +#define bfin_read_CAN0_CONTROL() bfin_read16(CAN0_CONTROL) +#define bfin_write_CAN0_CONTROL(val) bfin_write16(CAN0_CONTROL, val) +#define bfin_read_CAN0_INTR() bfin_read16(CAN0_INTR) +#define bfin_write_CAN0_INTR(val) bfin_write16(CAN0_INTR, val) +#define bfin_read_CAN0_MBTD() bfin_read16(CAN0_MBTD) +#define bfin_write_CAN0_MBTD(val) bfin_write16(CAN0_MBTD, val) +#define bfin_read_CAN0_EWR() bfin_read16(CAN0_EWR) +#define bfin_write_CAN0_EWR(val) bfin_write16(CAN0_EWR, val) +#define bfin_read_CAN0_ESR() bfin_read16(CAN0_ESR) +#define bfin_write_CAN0_ESR(val) bfin_write16(CAN0_ESR, val) +#define bfin_read_CAN0_UCCNT() bfin_read16(CAN0_UCCNT) +#define bfin_write_CAN0_UCCNT(val) bfin_write16(CAN0_UCCNT, val) +#define bfin_read_CAN0_UCRC() bfin_read16(CAN0_UCRC) +#define bfin_write_CAN0_UCRC(val) bfin_write16(CAN0_UCRC, val) +#define bfin_read_CAN0_UCCNF() bfin_read16(CAN0_UCCNF) +#define bfin_write_CAN0_UCCNF(val) bfin_write16(CAN0_UCCNF, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM00L() bfin_read16(CAN0_AM00L) +#define bfin_write_CAN0_AM00L(val) bfin_write16(CAN0_AM00L, val) +#define bfin_read_CAN0_AM00H() bfin_read16(CAN0_AM00H) +#define bfin_write_CAN0_AM00H(val) bfin_write16(CAN0_AM00H, val) +#define bfin_read_CAN0_AM01L() bfin_read16(CAN0_AM01L) +#define bfin_write_CAN0_AM01L(val) bfin_write16(CAN0_AM01L, val) +#define bfin_read_CAN0_AM01H() bfin_read16(CAN0_AM01H) +#define bfin_write_CAN0_AM01H(val) bfin_write16(CAN0_AM01H, val) +#define bfin_read_CAN0_AM02L() bfin_read16(CAN0_AM02L) +#define bfin_write_CAN0_AM02L(val) bfin_write16(CAN0_AM02L, val) +#define bfin_read_CAN0_AM02H() bfin_read16(CAN0_AM02H) +#define bfin_write_CAN0_AM02H(val) bfin_write16(CAN0_AM02H, val) +#define bfin_read_CAN0_AM03L() bfin_read16(CAN0_AM03L) +#define bfin_write_CAN0_AM03L(val) bfin_write16(CAN0_AM03L, val) +#define bfin_read_CAN0_AM03H() bfin_read16(CAN0_AM03H) +#define bfin_write_CAN0_AM03H(val) bfin_write16(CAN0_AM03H, val) +#define bfin_read_CAN0_AM04L() bfin_read16(CAN0_AM04L) +#define bfin_write_CAN0_AM04L(val) bfin_write16(CAN0_AM04L, val) +#define bfin_read_CAN0_AM04H() bfin_read16(CAN0_AM04H) +#define bfin_write_CAN0_AM04H(val) bfin_write16(CAN0_AM04H, val) +#define bfin_read_CAN0_AM05L() bfin_read16(CAN0_AM05L) +#define bfin_write_CAN0_AM05L(val) bfin_write16(CAN0_AM05L, val) +#define bfin_read_CAN0_AM05H() bfin_read16(CAN0_AM05H) +#define bfin_write_CAN0_AM05H(val) bfin_write16(CAN0_AM05H, val) +#define bfin_read_CAN0_AM06L() bfin_read16(CAN0_AM06L) +#define bfin_write_CAN0_AM06L(val) bfin_write16(CAN0_AM06L, val) +#define bfin_read_CAN0_AM06H() bfin_read16(CAN0_AM06H) +#define bfin_write_CAN0_AM06H(val) bfin_write16(CAN0_AM06H, val) +#define bfin_read_CAN0_AM07L() bfin_read16(CAN0_AM07L) +#define bfin_write_CAN0_AM07L(val) bfin_write16(CAN0_AM07L, val) +#define bfin_read_CAN0_AM07H() bfin_read16(CAN0_AM07H) +#define bfin_write_CAN0_AM07H(val) bfin_write16(CAN0_AM07H, val) +#define bfin_read_CAN0_AM08L() bfin_read16(CAN0_AM08L) +#define bfin_write_CAN0_AM08L(val) bfin_write16(CAN0_AM08L, val) +#define bfin_read_CAN0_AM08H() bfin_read16(CAN0_AM08H) +#define bfin_write_CAN0_AM08H(val) bfin_write16(CAN0_AM08H, val) +#define bfin_read_CAN0_AM09L() bfin_read16(CAN0_AM09L) +#define bfin_write_CAN0_AM09L(val) bfin_write16(CAN0_AM09L, val) +#define bfin_read_CAN0_AM09H() bfin_read16(CAN0_AM09H) +#define bfin_write_CAN0_AM09H(val) bfin_write16(CAN0_AM09H, val) +#define bfin_read_CAN0_AM10L() bfin_read16(CAN0_AM10L) +#define bfin_write_CAN0_AM10L(val) bfin_write16(CAN0_AM10L, val) +#define bfin_read_CAN0_AM10H() bfin_read16(CAN0_AM10H) +#define bfin_write_CAN0_AM10H(val) bfin_write16(CAN0_AM10H, val) +#define bfin_read_CAN0_AM11L() bfin_read16(CAN0_AM11L) +#define bfin_write_CAN0_AM11L(val) bfin_write16(CAN0_AM11L, val) +#define bfin_read_CAN0_AM11H() bfin_read16(CAN0_AM11H) +#define bfin_write_CAN0_AM11H(val) bfin_write16(CAN0_AM11H, val) +#define bfin_read_CAN0_AM12L() bfin_read16(CAN0_AM12L) +#define bfin_write_CAN0_AM12L(val) bfin_write16(CAN0_AM12L, val) +#define bfin_read_CAN0_AM12H() bfin_read16(CAN0_AM12H) +#define bfin_write_CAN0_AM12H(val) bfin_write16(CAN0_AM12H, val) +#define bfin_read_CAN0_AM13L() bfin_read16(CAN0_AM13L) +#define bfin_write_CAN0_AM13L(val) bfin_write16(CAN0_AM13L, val) +#define bfin_read_CAN0_AM13H() bfin_read16(CAN0_AM13H) +#define bfin_write_CAN0_AM13H(val) bfin_write16(CAN0_AM13H, val) +#define bfin_read_CAN0_AM14L() bfin_read16(CAN0_AM14L) +#define bfin_write_CAN0_AM14L(val) bfin_write16(CAN0_AM14L, val) +#define bfin_read_CAN0_AM14H() bfin_read16(CAN0_AM14H) +#define bfin_write_CAN0_AM14H(val) bfin_write16(CAN0_AM14H, val) +#define bfin_read_CAN0_AM15L() bfin_read16(CAN0_AM15L) +#define bfin_write_CAN0_AM15L(val) bfin_write16(CAN0_AM15L, val) +#define bfin_read_CAN0_AM15H() bfin_read16(CAN0_AM15H) +#define bfin_write_CAN0_AM15H(val) bfin_write16(CAN0_AM15H, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM16L() bfin_read16(CAN0_AM16L) +#define bfin_write_CAN0_AM16L(val) bfin_write16(CAN0_AM16L, val) +#define bfin_read_CAN0_AM16H() bfin_read16(CAN0_AM16H) +#define bfin_write_CAN0_AM16H(val) bfin_write16(CAN0_AM16H, val) +#define bfin_read_CAN0_AM17L() bfin_read16(CAN0_AM17L) +#define bfin_write_CAN0_AM17L(val) bfin_write16(CAN0_AM17L, val) +#define bfin_read_CAN0_AM17H() bfin_read16(CAN0_AM17H) +#define bfin_write_CAN0_AM17H(val) bfin_write16(CAN0_AM17H, val) +#define bfin_read_CAN0_AM18L() bfin_read16(CAN0_AM18L) +#define bfin_write_CAN0_AM18L(val) bfin_write16(CAN0_AM18L, val) +#define bfin_read_CAN0_AM18H() bfin_read16(CAN0_AM18H) +#define bfin_write_CAN0_AM18H(val) bfin_write16(CAN0_AM18H, val) +#define bfin_read_CAN0_AM19L() bfin_read16(CAN0_AM19L) +#define bfin_write_CAN0_AM19L(val) bfin_write16(CAN0_AM19L, val) +#define bfin_read_CAN0_AM19H() bfin_read16(CAN0_AM19H) +#define bfin_write_CAN0_AM19H(val) bfin_write16(CAN0_AM19H, val) +#define bfin_read_CAN0_AM20L() bfin_read16(CAN0_AM20L) +#define bfin_write_CAN0_AM20L(val) bfin_write16(CAN0_AM20L, val) +#define bfin_read_CAN0_AM20H() bfin_read16(CAN0_AM20H) +#define bfin_write_CAN0_AM20H(val) bfin_write16(CAN0_AM20H, val) +#define bfin_read_CAN0_AM21L() bfin_read16(CAN0_AM21L) +#define bfin_write_CAN0_AM21L(val) bfin_write16(CAN0_AM21L, val) +#define bfin_read_CAN0_AM21H() bfin_read16(CAN0_AM21H) +#define bfin_write_CAN0_AM21H(val) bfin_write16(CAN0_AM21H, val) +#define bfin_read_CAN0_AM22L() bfin_read16(CAN0_AM22L) +#define bfin_write_CAN0_AM22L(val) bfin_write16(CAN0_AM22L, val) +#define bfin_read_CAN0_AM22H() bfin_read16(CAN0_AM22H) +#define bfin_write_CAN0_AM22H(val) bfin_write16(CAN0_AM22H, val) +#define bfin_read_CAN0_AM23L() bfin_read16(CAN0_AM23L) +#define bfin_write_CAN0_AM23L(val) bfin_write16(CAN0_AM23L, val) +#define bfin_read_CAN0_AM23H() bfin_read16(CAN0_AM23H) +#define bfin_write_CAN0_AM23H(val) bfin_write16(CAN0_AM23H, val) +#define bfin_read_CAN0_AM24L() bfin_read16(CAN0_AM24L) +#define bfin_write_CAN0_AM24L(val) bfin_write16(CAN0_AM24L, val) +#define bfin_read_CAN0_AM24H() bfin_read16(CAN0_AM24H) +#define bfin_write_CAN0_AM24H(val) bfin_write16(CAN0_AM24H, val) +#define bfin_read_CAN0_AM25L() bfin_read16(CAN0_AM25L) +#define bfin_write_CAN0_AM25L(val) bfin_write16(CAN0_AM25L, val) +#define bfin_read_CAN0_AM25H() bfin_read16(CAN0_AM25H) +#define bfin_write_CAN0_AM25H(val) bfin_write16(CAN0_AM25H, val) +#define bfin_read_CAN0_AM26L() bfin_read16(CAN0_AM26L) +#define bfin_write_CAN0_AM26L(val) bfin_write16(CAN0_AM26L, val) +#define bfin_read_CAN0_AM26H() bfin_read16(CAN0_AM26H) +#define bfin_write_CAN0_AM26H(val) bfin_write16(CAN0_AM26H, val) +#define bfin_read_CAN0_AM27L() bfin_read16(CAN0_AM27L) +#define bfin_write_CAN0_AM27L(val) bfin_write16(CAN0_AM27L, val) +#define bfin_read_CAN0_AM27H() bfin_read16(CAN0_AM27H) +#define bfin_write_CAN0_AM27H(val) bfin_write16(CAN0_AM27H, val) +#define bfin_read_CAN0_AM28L() bfin_read16(CAN0_AM28L) +#define bfin_write_CAN0_AM28L(val) bfin_write16(CAN0_AM28L, val) +#define bfin_read_CAN0_AM28H() bfin_read16(CAN0_AM28H) +#define bfin_write_CAN0_AM28H(val) bfin_write16(CAN0_AM28H, val) +#define bfin_read_CAN0_AM29L() bfin_read16(CAN0_AM29L) +#define bfin_write_CAN0_AM29L(val) bfin_write16(CAN0_AM29L, val) +#define bfin_read_CAN0_AM29H() bfin_read16(CAN0_AM29H) +#define bfin_write_CAN0_AM29H(val) bfin_write16(CAN0_AM29H, val) +#define bfin_read_CAN0_AM30L() bfin_read16(CAN0_AM30L) +#define bfin_write_CAN0_AM30L(val) bfin_write16(CAN0_AM30L, val) +#define bfin_read_CAN0_AM30H() bfin_read16(CAN0_AM30H) +#define bfin_write_CAN0_AM30H(val) bfin_write16(CAN0_AM30H, val) +#define bfin_read_CAN0_AM31L() bfin_read16(CAN0_AM31L) +#define bfin_write_CAN0_AM31L(val) bfin_write16(CAN0_AM31L, val) +#define bfin_read_CAN0_AM31H() bfin_read16(CAN0_AM31H) +#define bfin_write_CAN0_AM31H(val) bfin_write16(CAN0_AM31H, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB00_DATA0() bfin_read16(CAN0_MB00_DATA0) +#define bfin_write_CAN0_MB00_DATA0(val) bfin_write16(CAN0_MB00_DATA0, val) +#define bfin_read_CAN0_MB00_DATA1() bfin_read16(CAN0_MB00_DATA1) +#define bfin_write_CAN0_MB00_DATA1(val) bfin_write16(CAN0_MB00_DATA1, val) +#define bfin_read_CAN0_MB00_DATA2() bfin_read16(CAN0_MB00_DATA2) +#define bfin_write_CAN0_MB00_DATA2(val) bfin_write16(CAN0_MB00_DATA2, val) +#define bfin_read_CAN0_MB00_DATA3() bfin_read16(CAN0_MB00_DATA3) +#define bfin_write_CAN0_MB00_DATA3(val) bfin_write16(CAN0_MB00_DATA3, val) +#define bfin_read_CAN0_MB00_LENGTH() bfin_read16(CAN0_MB00_LENGTH) +#define bfin_write_CAN0_MB00_LENGTH(val) bfin_write16(CAN0_MB00_LENGTH, val) +#define bfin_read_CAN0_MB00_TIMESTAMP() bfin_read16(CAN0_MB00_TIMESTAMP) +#define bfin_write_CAN0_MB00_TIMESTAMP(val) bfin_write16(CAN0_MB00_TIMESTAMP, val) +#define bfin_read_CAN0_MB00_ID0() bfin_read16(CAN0_MB00_ID0) +#define bfin_write_CAN0_MB00_ID0(val) bfin_write16(CAN0_MB00_ID0, val) +#define bfin_read_CAN0_MB00_ID1() bfin_read16(CAN0_MB00_ID1) +#define bfin_write_CAN0_MB00_ID1(val) bfin_write16(CAN0_MB00_ID1, val) +#define bfin_read_CAN0_MB01_DATA0() bfin_read16(CAN0_MB01_DATA0) +#define bfin_write_CAN0_MB01_DATA0(val) bfin_write16(CAN0_MB01_DATA0, val) +#define bfin_read_CAN0_MB01_DATA1() bfin_read16(CAN0_MB01_DATA1) +#define bfin_write_CAN0_MB01_DATA1(val) bfin_write16(CAN0_MB01_DATA1, val) +#define bfin_read_CAN0_MB01_DATA2() bfin_read16(CAN0_MB01_DATA2) +#define bfin_write_CAN0_MB01_DATA2(val) bfin_write16(CAN0_MB01_DATA2, val) +#define bfin_read_CAN0_MB01_DATA3() bfin_read16(CAN0_MB01_DATA3) +#define bfin_write_CAN0_MB01_DATA3(val) bfin_write16(CAN0_MB01_DATA3, val) +#define bfin_read_CAN0_MB01_LENGTH() bfin_read16(CAN0_MB01_LENGTH) +#define bfin_write_CAN0_MB01_LENGTH(val) bfin_write16(CAN0_MB01_LENGTH, val) +#define bfin_read_CAN0_MB01_TIMESTAMP() bfin_read16(CAN0_MB01_TIMESTAMP) +#define bfin_write_CAN0_MB01_TIMESTAMP(val) bfin_write16(CAN0_MB01_TIMESTAMP, val) +#define bfin_read_CAN0_MB01_ID0() bfin_read16(CAN0_MB01_ID0) +#define bfin_write_CAN0_MB01_ID0(val) bfin_write16(CAN0_MB01_ID0, val) +#define bfin_read_CAN0_MB01_ID1() bfin_read16(CAN0_MB01_ID1) +#define bfin_write_CAN0_MB01_ID1(val) bfin_write16(CAN0_MB01_ID1, val) +#define bfin_read_CAN0_MB02_DATA0() bfin_read16(CAN0_MB02_DATA0) +#define bfin_write_CAN0_MB02_DATA0(val) bfin_write16(CAN0_MB02_DATA0, val) +#define bfin_read_CAN0_MB02_DATA1() bfin_read16(CAN0_MB02_DATA1) +#define bfin_write_CAN0_MB02_DATA1(val) bfin_write16(CAN0_MB02_DATA1, val) +#define bfin_read_CAN0_MB02_DATA2() bfin_read16(CAN0_MB02_DATA2) +#define bfin_write_CAN0_MB02_DATA2(val) bfin_write16(CAN0_MB02_DATA2, val) +#define bfin_read_CAN0_MB02_DATA3() bfin_read16(CAN0_MB02_DATA3) +#define bfin_write_CAN0_MB02_DATA3(val) bfin_write16(CAN0_MB02_DATA3, val) +#define bfin_read_CAN0_MB02_LENGTH() bfin_read16(CAN0_MB02_LENGTH) +#define bfin_write_CAN0_MB02_LENGTH(val) bfin_write16(CAN0_MB02_LENGTH, val) +#define bfin_read_CAN0_MB02_TIMESTAMP() bfin_read16(CAN0_MB02_TIMESTAMP) +#define bfin_write_CAN0_MB02_TIMESTAMP(val) bfin_write16(CAN0_MB02_TIMESTAMP, val) +#define bfin_read_CAN0_MB02_ID0() bfin_read16(CAN0_MB02_ID0) +#define bfin_write_CAN0_MB02_ID0(val) bfin_write16(CAN0_MB02_ID0, val) +#define bfin_read_CAN0_MB02_ID1() bfin_read16(CAN0_MB02_ID1) +#define bfin_write_CAN0_MB02_ID1(val) bfin_write16(CAN0_MB02_ID1, val) +#define bfin_read_CAN0_MB03_DATA0() bfin_read16(CAN0_MB03_DATA0) +#define bfin_write_CAN0_MB03_DATA0(val) bfin_write16(CAN0_MB03_DATA0, val) +#define bfin_read_CAN0_MB03_DATA1() bfin_read16(CAN0_MB03_DATA1) +#define bfin_write_CAN0_MB03_DATA1(val) bfin_write16(CAN0_MB03_DATA1, val) +#define bfin_read_CAN0_MB03_DATA2() bfin_read16(CAN0_MB03_DATA2) +#define bfin_write_CAN0_MB03_DATA2(val) bfin_write16(CAN0_MB03_DATA2, val) +#define bfin_read_CAN0_MB03_DATA3() bfin_read16(CAN0_MB03_DATA3) +#define bfin_write_CAN0_MB03_DATA3(val) bfin_write16(CAN0_MB03_DATA3, val) +#define bfin_read_CAN0_MB03_LENGTH() bfin_read16(CAN0_MB03_LENGTH) +#define bfin_write_CAN0_MB03_LENGTH(val) bfin_write16(CAN0_MB03_LENGTH, val) +#define bfin_read_CAN0_MB03_TIMESTAMP() bfin_read16(CAN0_MB03_TIMESTAMP) +#define bfin_write_CAN0_MB03_TIMESTAMP(val) bfin_write16(CAN0_MB03_TIMESTAMP, val) +#define bfin_read_CAN0_MB03_ID0() bfin_read16(CAN0_MB03_ID0) +#define bfin_write_CAN0_MB03_ID0(val) bfin_write16(CAN0_MB03_ID0, val) +#define bfin_read_CAN0_MB03_ID1() bfin_read16(CAN0_MB03_ID1) +#define bfin_write_CAN0_MB03_ID1(val) bfin_write16(CAN0_MB03_ID1, val) +#define bfin_read_CAN0_MB04_DATA0() bfin_read16(CAN0_MB04_DATA0) +#define bfin_write_CAN0_MB04_DATA0(val) bfin_write16(CAN0_MB04_DATA0, val) +#define bfin_read_CAN0_MB04_DATA1() bfin_read16(CAN0_MB04_DATA1) +#define bfin_write_CAN0_MB04_DATA1(val) bfin_write16(CAN0_MB04_DATA1, val) +#define bfin_read_CAN0_MB04_DATA2() bfin_read16(CAN0_MB04_DATA2) +#define bfin_write_CAN0_MB04_DATA2(val) bfin_write16(CAN0_MB04_DATA2, val) +#define bfin_read_CAN0_MB04_DATA3() bfin_read16(CAN0_MB04_DATA3) +#define bfin_write_CAN0_MB04_DATA3(val) bfin_write16(CAN0_MB04_DATA3, val) +#define bfin_read_CAN0_MB04_LENGTH() bfin_read16(CAN0_MB04_LENGTH) +#define bfin_write_CAN0_MB04_LENGTH(val) bfin_write16(CAN0_MB04_LENGTH, val) +#define bfin_read_CAN0_MB04_TIMESTAMP() bfin_read16(CAN0_MB04_TIMESTAMP) +#define bfin_write_CAN0_MB04_TIMESTAMP(val) bfin_write16(CAN0_MB04_TIMESTAMP, val) +#define bfin_read_CAN0_MB04_ID0() bfin_read16(CAN0_MB04_ID0) +#define bfin_write_CAN0_MB04_ID0(val) bfin_write16(CAN0_MB04_ID0, val) +#define bfin_read_CAN0_MB04_ID1() bfin_read16(CAN0_MB04_ID1) +#define bfin_write_CAN0_MB04_ID1(val) bfin_write16(CAN0_MB04_ID1, val) +#define bfin_read_CAN0_MB05_DATA0() bfin_read16(CAN0_MB05_DATA0) +#define bfin_write_CAN0_MB05_DATA0(val) bfin_write16(CAN0_MB05_DATA0, val) +#define bfin_read_CAN0_MB05_DATA1() bfin_read16(CAN0_MB05_DATA1) +#define bfin_write_CAN0_MB05_DATA1(val) bfin_write16(CAN0_MB05_DATA1, val) +#define bfin_read_CAN0_MB05_DATA2() bfin_read16(CAN0_MB05_DATA2) +#define bfin_write_CAN0_MB05_DATA2(val) bfin_write16(CAN0_MB05_DATA2, val) +#define bfin_read_CAN0_MB05_DATA3() bfin_read16(CAN0_MB05_DATA3) +#define bfin_write_CAN0_MB05_DATA3(val) bfin_write16(CAN0_MB05_DATA3, val) +#define bfin_read_CAN0_MB05_LENGTH() bfin_read16(CAN0_MB05_LENGTH) +#define bfin_write_CAN0_MB05_LENGTH(val) bfin_write16(CAN0_MB05_LENGTH, val) +#define bfin_read_CAN0_MB05_TIMESTAMP() bfin_read16(CAN0_MB05_TIMESTAMP) +#define bfin_write_CAN0_MB05_TIMESTAMP(val) bfin_write16(CAN0_MB05_TIMESTAMP, val) +#define bfin_read_CAN0_MB05_ID0() bfin_read16(CAN0_MB05_ID0) +#define bfin_write_CAN0_MB05_ID0(val) bfin_write16(CAN0_MB05_ID0, val) +#define bfin_read_CAN0_MB05_ID1() bfin_read16(CAN0_MB05_ID1) +#define bfin_write_CAN0_MB05_ID1(val) bfin_write16(CAN0_MB05_ID1, val) +#define bfin_read_CAN0_MB06_DATA0() bfin_read16(CAN0_MB06_DATA0) +#define bfin_write_CAN0_MB06_DATA0(val) bfin_write16(CAN0_MB06_DATA0, val) +#define bfin_read_CAN0_MB06_DATA1() bfin_read16(CAN0_MB06_DATA1) +#define bfin_write_CAN0_MB06_DATA1(val) bfin_write16(CAN0_MB06_DATA1, val) +#define bfin_read_CAN0_MB06_DATA2() bfin_read16(CAN0_MB06_DATA2) +#define bfin_write_CAN0_MB06_DATA2(val) bfin_write16(CAN0_MB06_DATA2, val) +#define bfin_read_CAN0_MB06_DATA3() bfin_read16(CAN0_MB06_DATA3) +#define bfin_write_CAN0_MB06_DATA3(val) bfin_write16(CAN0_MB06_DATA3, val) +#define bfin_read_CAN0_MB06_LENGTH() bfin_read16(CAN0_MB06_LENGTH) +#define bfin_write_CAN0_MB06_LENGTH(val) bfin_write16(CAN0_MB06_LENGTH, val) +#define bfin_read_CAN0_MB06_TIMESTAMP() bfin_read16(CAN0_MB06_TIMESTAMP) +#define bfin_write_CAN0_MB06_TIMESTAMP(val) bfin_write16(CAN0_MB06_TIMESTAMP, val) +#define bfin_read_CAN0_MB06_ID0() bfin_read16(CAN0_MB06_ID0) +#define bfin_write_CAN0_MB06_ID0(val) bfin_write16(CAN0_MB06_ID0, val) +#define bfin_read_CAN0_MB06_ID1() bfin_read16(CAN0_MB06_ID1) +#define bfin_write_CAN0_MB06_ID1(val) bfin_write16(CAN0_MB06_ID1, val) +#define bfin_read_CAN0_MB07_DATA0() bfin_read16(CAN0_MB07_DATA0) +#define bfin_write_CAN0_MB07_DATA0(val) bfin_write16(CAN0_MB07_DATA0, val) +#define bfin_read_CAN0_MB07_DATA1() bfin_read16(CAN0_MB07_DATA1) +#define bfin_write_CAN0_MB07_DATA1(val) bfin_write16(CAN0_MB07_DATA1, val) +#define bfin_read_CAN0_MB07_DATA2() bfin_read16(CAN0_MB07_DATA2) +#define bfin_write_CAN0_MB07_DATA2(val) bfin_write16(CAN0_MB07_DATA2, val) +#define bfin_read_CAN0_MB07_DATA3() bfin_read16(CAN0_MB07_DATA3) +#define bfin_write_CAN0_MB07_DATA3(val) bfin_write16(CAN0_MB07_DATA3, val) +#define bfin_read_CAN0_MB07_LENGTH() bfin_read16(CAN0_MB07_LENGTH) +#define bfin_write_CAN0_MB07_LENGTH(val) bfin_write16(CAN0_MB07_LENGTH, val) +#define bfin_read_CAN0_MB07_TIMESTAMP() bfin_read16(CAN0_MB07_TIMESTAMP) +#define bfin_write_CAN0_MB07_TIMESTAMP(val) bfin_write16(CAN0_MB07_TIMESTAMP, val) +#define bfin_read_CAN0_MB07_ID0() bfin_read16(CAN0_MB07_ID0) +#define bfin_write_CAN0_MB07_ID0(val) bfin_write16(CAN0_MB07_ID0, val) +#define bfin_read_CAN0_MB07_ID1() bfin_read16(CAN0_MB07_ID1) +#define bfin_write_CAN0_MB07_ID1(val) bfin_write16(CAN0_MB07_ID1, val) +#define bfin_read_CAN0_MB08_DATA0() bfin_read16(CAN0_MB08_DATA0) +#define bfin_write_CAN0_MB08_DATA0(val) bfin_write16(CAN0_MB08_DATA0, val) +#define bfin_read_CAN0_MB08_DATA1() bfin_read16(CAN0_MB08_DATA1) +#define bfin_write_CAN0_MB08_DATA1(val) bfin_write16(CAN0_MB08_DATA1, val) +#define bfin_read_CAN0_MB08_DATA2() bfin_read16(CAN0_MB08_DATA2) +#define bfin_write_CAN0_MB08_DATA2(val) bfin_write16(CAN0_MB08_DATA2, val) +#define bfin_read_CAN0_MB08_DATA3() bfin_read16(CAN0_MB08_DATA3) +#define bfin_write_CAN0_MB08_DATA3(val) bfin_write16(CAN0_MB08_DATA3, val) +#define bfin_read_CAN0_MB08_LENGTH() bfin_read16(CAN0_MB08_LENGTH) +#define bfin_write_CAN0_MB08_LENGTH(val) bfin_write16(CAN0_MB08_LENGTH, val) +#define bfin_read_CAN0_MB08_TIMESTAMP() bfin_read16(CAN0_MB08_TIMESTAMP) +#define bfin_write_CAN0_MB08_TIMESTAMP(val) bfin_write16(CAN0_MB08_TIMESTAMP, val) +#define bfin_read_CAN0_MB08_ID0() bfin_read16(CAN0_MB08_ID0) +#define bfin_write_CAN0_MB08_ID0(val) bfin_write16(CAN0_MB08_ID0, val) +#define bfin_read_CAN0_MB08_ID1() bfin_read16(CAN0_MB08_ID1) +#define bfin_write_CAN0_MB08_ID1(val) bfin_write16(CAN0_MB08_ID1, val) +#define bfin_read_CAN0_MB09_DATA0() bfin_read16(CAN0_MB09_DATA0) +#define bfin_write_CAN0_MB09_DATA0(val) bfin_write16(CAN0_MB09_DATA0, val) +#define bfin_read_CAN0_MB09_DATA1() bfin_read16(CAN0_MB09_DATA1) +#define bfin_write_CAN0_MB09_DATA1(val) bfin_write16(CAN0_MB09_DATA1, val) +#define bfin_read_CAN0_MB09_DATA2() bfin_read16(CAN0_MB09_DATA2) +#define bfin_write_CAN0_MB09_DATA2(val) bfin_write16(CAN0_MB09_DATA2, val) +#define bfin_read_CAN0_MB09_DATA3() bfin_read16(CAN0_MB09_DATA3) +#define bfin_write_CAN0_MB09_DATA3(val) bfin_write16(CAN0_MB09_DATA3, val) +#define bfin_read_CAN0_MB09_LENGTH() bfin_read16(CAN0_MB09_LENGTH) +#define bfin_write_CAN0_MB09_LENGTH(val) bfin_write16(CAN0_MB09_LENGTH, val) +#define bfin_read_CAN0_MB09_TIMESTAMP() bfin_read16(CAN0_MB09_TIMESTAMP) +#define bfin_write_CAN0_MB09_TIMESTAMP(val) bfin_write16(CAN0_MB09_TIMESTAMP, val) +#define bfin_read_CAN0_MB09_ID0() bfin_read16(CAN0_MB09_ID0) +#define bfin_write_CAN0_MB09_ID0(val) bfin_write16(CAN0_MB09_ID0, val) +#define bfin_read_CAN0_MB09_ID1() bfin_read16(CAN0_MB09_ID1) +#define bfin_write_CAN0_MB09_ID1(val) bfin_write16(CAN0_MB09_ID1, val) +#define bfin_read_CAN0_MB10_DATA0() bfin_read16(CAN0_MB10_DATA0) +#define bfin_write_CAN0_MB10_DATA0(val) bfin_write16(CAN0_MB10_DATA0, val) +#define bfin_read_CAN0_MB10_DATA1() bfin_read16(CAN0_MB10_DATA1) +#define bfin_write_CAN0_MB10_DATA1(val) bfin_write16(CAN0_MB10_DATA1, val) +#define bfin_read_CAN0_MB10_DATA2() bfin_read16(CAN0_MB10_DATA2) +#define bfin_write_CAN0_MB10_DATA2(val) bfin_write16(CAN0_MB10_DATA2, val) +#define bfin_read_CAN0_MB10_DATA3() bfin_read16(CAN0_MB10_DATA3) +#define bfin_write_CAN0_MB10_DATA3(val) bfin_write16(CAN0_MB10_DATA3, val) +#define bfin_read_CAN0_MB10_LENGTH() bfin_read16(CAN0_MB10_LENGTH) +#define bfin_write_CAN0_MB10_LENGTH(val) bfin_write16(CAN0_MB10_LENGTH, val) +#define bfin_read_CAN0_MB10_TIMESTAMP() bfin_read16(CAN0_MB10_TIMESTAMP) +#define bfin_write_CAN0_MB10_TIMESTAMP(val) bfin_write16(CAN0_MB10_TIMESTAMP, val) +#define bfin_read_CAN0_MB10_ID0() bfin_read16(CAN0_MB10_ID0) +#define bfin_write_CAN0_MB10_ID0(val) bfin_write16(CAN0_MB10_ID0, val) +#define bfin_read_CAN0_MB10_ID1() bfin_read16(CAN0_MB10_ID1) +#define bfin_write_CAN0_MB10_ID1(val) bfin_write16(CAN0_MB10_ID1, val) +#define bfin_read_CAN0_MB11_DATA0() bfin_read16(CAN0_MB11_DATA0) +#define bfin_write_CAN0_MB11_DATA0(val) bfin_write16(CAN0_MB11_DATA0, val) +#define bfin_read_CAN0_MB11_DATA1() bfin_read16(CAN0_MB11_DATA1) +#define bfin_write_CAN0_MB11_DATA1(val) bfin_write16(CAN0_MB11_DATA1, val) +#define bfin_read_CAN0_MB11_DATA2() bfin_read16(CAN0_MB11_DATA2) +#define bfin_write_CAN0_MB11_DATA2(val) bfin_write16(CAN0_MB11_DATA2, val) +#define bfin_read_CAN0_MB11_DATA3() bfin_read16(CAN0_MB11_DATA3) +#define bfin_write_CAN0_MB11_DATA3(val) bfin_write16(CAN0_MB11_DATA3, val) +#define bfin_read_CAN0_MB11_LENGTH() bfin_read16(CAN0_MB11_LENGTH) +#define bfin_write_CAN0_MB11_LENGTH(val) bfin_write16(CAN0_MB11_LENGTH, val) +#define bfin_read_CAN0_MB11_TIMESTAMP() bfin_read16(CAN0_MB11_TIMESTAMP) +#define bfin_write_CAN0_MB11_TIMESTAMP(val) bfin_write16(CAN0_MB11_TIMESTAMP, val) +#define bfin_read_CAN0_MB11_ID0() bfin_read16(CAN0_MB11_ID0) +#define bfin_write_CAN0_MB11_ID0(val) bfin_write16(CAN0_MB11_ID0, val) +#define bfin_read_CAN0_MB11_ID1() bfin_read16(CAN0_MB11_ID1) +#define bfin_write_CAN0_MB11_ID1(val) bfin_write16(CAN0_MB11_ID1, val) +#define bfin_read_CAN0_MB12_DATA0() bfin_read16(CAN0_MB12_DATA0) +#define bfin_write_CAN0_MB12_DATA0(val) bfin_write16(CAN0_MB12_DATA0, val) +#define bfin_read_CAN0_MB12_DATA1() bfin_read16(CAN0_MB12_DATA1) +#define bfin_write_CAN0_MB12_DATA1(val) bfin_write16(CAN0_MB12_DATA1, val) +#define bfin_read_CAN0_MB12_DATA2() bfin_read16(CAN0_MB12_DATA2) +#define bfin_write_CAN0_MB12_DATA2(val) bfin_write16(CAN0_MB12_DATA2, val) +#define bfin_read_CAN0_MB12_DATA3() bfin_read16(CAN0_MB12_DATA3) +#define bfin_write_CAN0_MB12_DATA3(val) bfin_write16(CAN0_MB12_DATA3, val) +#define bfin_read_CAN0_MB12_LENGTH() bfin_read16(CAN0_MB12_LENGTH) +#define bfin_write_CAN0_MB12_LENGTH(val) bfin_write16(CAN0_MB12_LENGTH, val) +#define bfin_read_CAN0_MB12_TIMESTAMP() bfin_read16(CAN0_MB12_TIMESTAMP) +#define bfin_write_CAN0_MB12_TIMESTAMP(val) bfin_write16(CAN0_MB12_TIMESTAMP, val) +#define bfin_read_CAN0_MB12_ID0() bfin_read16(CAN0_MB12_ID0) +#define bfin_write_CAN0_MB12_ID0(val) bfin_write16(CAN0_MB12_ID0, val) +#define bfin_read_CAN0_MB12_ID1() bfin_read16(CAN0_MB12_ID1) +#define bfin_write_CAN0_MB12_ID1(val) bfin_write16(CAN0_MB12_ID1, val) +#define bfin_read_CAN0_MB13_DATA0() bfin_read16(CAN0_MB13_DATA0) +#define bfin_write_CAN0_MB13_DATA0(val) bfin_write16(CAN0_MB13_DATA0, val) +#define bfin_read_CAN0_MB13_DATA1() bfin_read16(CAN0_MB13_DATA1) +#define bfin_write_CAN0_MB13_DATA1(val) bfin_write16(CAN0_MB13_DATA1, val) +#define bfin_read_CAN0_MB13_DATA2() bfin_read16(CAN0_MB13_DATA2) +#define bfin_write_CAN0_MB13_DATA2(val) bfin_write16(CAN0_MB13_DATA2, val) +#define bfin_read_CAN0_MB13_DATA3() bfin_read16(CAN0_MB13_DATA3) +#define bfin_write_CAN0_MB13_DATA3(val) bfin_write16(CAN0_MB13_DATA3, val) +#define bfin_read_CAN0_MB13_LENGTH() bfin_read16(CAN0_MB13_LENGTH) +#define bfin_write_CAN0_MB13_LENGTH(val) bfin_write16(CAN0_MB13_LENGTH, val) +#define bfin_read_CAN0_MB13_TIMESTAMP() bfin_read16(CAN0_MB13_TIMESTAMP) +#define bfin_write_CAN0_MB13_TIMESTAMP(val) bfin_write16(CAN0_MB13_TIMESTAMP, val) +#define bfin_read_CAN0_MB13_ID0() bfin_read16(CAN0_MB13_ID0) +#define bfin_write_CAN0_MB13_ID0(val) bfin_write16(CAN0_MB13_ID0, val) +#define bfin_read_CAN0_MB13_ID1() bfin_read16(CAN0_MB13_ID1) +#define bfin_write_CAN0_MB13_ID1(val) bfin_write16(CAN0_MB13_ID1, val) +#define bfin_read_CAN0_MB14_DATA0() bfin_read16(CAN0_MB14_DATA0) +#define bfin_write_CAN0_MB14_DATA0(val) bfin_write16(CAN0_MB14_DATA0, val) +#define bfin_read_CAN0_MB14_DATA1() bfin_read16(CAN0_MB14_DATA1) +#define bfin_write_CAN0_MB14_DATA1(val) bfin_write16(CAN0_MB14_DATA1, val) +#define bfin_read_CAN0_MB14_DATA2() bfin_read16(CAN0_MB14_DATA2) +#define bfin_write_CAN0_MB14_DATA2(val) bfin_write16(CAN0_MB14_DATA2, val) +#define bfin_read_CAN0_MB14_DATA3() bfin_read16(CAN0_MB14_DATA3) +#define bfin_write_CAN0_MB14_DATA3(val) bfin_write16(CAN0_MB14_DATA3, val) +#define bfin_read_CAN0_MB14_LENGTH() bfin_read16(CAN0_MB14_LENGTH) +#define bfin_write_CAN0_MB14_LENGTH(val) bfin_write16(CAN0_MB14_LENGTH, val) +#define bfin_read_CAN0_MB14_TIMESTAMP() bfin_read16(CAN0_MB14_TIMESTAMP) +#define bfin_write_CAN0_MB14_TIMESTAMP(val) bfin_write16(CAN0_MB14_TIMESTAMP, val) +#define bfin_read_CAN0_MB14_ID0() bfin_read16(CAN0_MB14_ID0) +#define bfin_write_CAN0_MB14_ID0(val) bfin_write16(CAN0_MB14_ID0, val) +#define bfin_read_CAN0_MB14_ID1() bfin_read16(CAN0_MB14_ID1) +#define bfin_write_CAN0_MB14_ID1(val) bfin_write16(CAN0_MB14_ID1, val) +#define bfin_read_CAN0_MB15_DATA0() bfin_read16(CAN0_MB15_DATA0) +#define bfin_write_CAN0_MB15_DATA0(val) bfin_write16(CAN0_MB15_DATA0, val) +#define bfin_read_CAN0_MB15_DATA1() bfin_read16(CAN0_MB15_DATA1) +#define bfin_write_CAN0_MB15_DATA1(val) bfin_write16(CAN0_MB15_DATA1, val) +#define bfin_read_CAN0_MB15_DATA2() bfin_read16(CAN0_MB15_DATA2) +#define bfin_write_CAN0_MB15_DATA2(val) bfin_write16(CAN0_MB15_DATA2, val) +#define bfin_read_CAN0_MB15_DATA3() bfin_read16(CAN0_MB15_DATA3) +#define bfin_write_CAN0_MB15_DATA3(val) bfin_write16(CAN0_MB15_DATA3, val) +#define bfin_read_CAN0_MB15_LENGTH() bfin_read16(CAN0_MB15_LENGTH) +#define bfin_write_CAN0_MB15_LENGTH(val) bfin_write16(CAN0_MB15_LENGTH, val) +#define bfin_read_CAN0_MB15_TIMESTAMP() bfin_read16(CAN0_MB15_TIMESTAMP) +#define bfin_write_CAN0_MB15_TIMESTAMP(val) bfin_write16(CAN0_MB15_TIMESTAMP, val) +#define bfin_read_CAN0_MB15_ID0() bfin_read16(CAN0_MB15_ID0) +#define bfin_write_CAN0_MB15_ID0(val) bfin_write16(CAN0_MB15_ID0, val) +#define bfin_read_CAN0_MB15_ID1() bfin_read16(CAN0_MB15_ID1) +#define bfin_write_CAN0_MB15_ID1(val) bfin_write16(CAN0_MB15_ID1, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB16_DATA0() bfin_read16(CAN0_MB16_DATA0) +#define bfin_write_CAN0_MB16_DATA0(val) bfin_write16(CAN0_MB16_DATA0, val) +#define bfin_read_CAN0_MB16_DATA1() bfin_read16(CAN0_MB16_DATA1) +#define bfin_write_CAN0_MB16_DATA1(val) bfin_write16(CAN0_MB16_DATA1, val) +#define bfin_read_CAN0_MB16_DATA2() bfin_read16(CAN0_MB16_DATA2) +#define bfin_write_CAN0_MB16_DATA2(val) bfin_write16(CAN0_MB16_DATA2, val) +#define bfin_read_CAN0_MB16_DATA3() bfin_read16(CAN0_MB16_DATA3) +#define bfin_write_CAN0_MB16_DATA3(val) bfin_write16(CAN0_MB16_DATA3, val) +#define bfin_read_CAN0_MB16_LENGTH() bfin_read16(CAN0_MB16_LENGTH) +#define bfin_write_CAN0_MB16_LENGTH(val) bfin_write16(CAN0_MB16_LENGTH, val) +#define bfin_read_CAN0_MB16_TIMESTAMP() bfin_read16(CAN0_MB16_TIMESTAMP) +#define bfin_write_CAN0_MB16_TIMESTAMP(val) bfin_write16(CAN0_MB16_TIMESTAMP, val) +#define bfin_read_CAN0_MB16_ID0() bfin_read16(CAN0_MB16_ID0) +#define bfin_write_CAN0_MB16_ID0(val) bfin_write16(CAN0_MB16_ID0, val) +#define bfin_read_CAN0_MB16_ID1() bfin_read16(CAN0_MB16_ID1) +#define bfin_write_CAN0_MB16_ID1(val) bfin_write16(CAN0_MB16_ID1, val) +#define bfin_read_CAN0_MB17_DATA0() bfin_read16(CAN0_MB17_DATA0) +#define bfin_write_CAN0_MB17_DATA0(val) bfin_write16(CAN0_MB17_DATA0, val) +#define bfin_read_CAN0_MB17_DATA1() bfin_read16(CAN0_MB17_DATA1) +#define bfin_write_CAN0_MB17_DATA1(val) bfin_write16(CAN0_MB17_DATA1, val) +#define bfin_read_CAN0_MB17_DATA2() bfin_read16(CAN0_MB17_DATA2) +#define bfin_write_CAN0_MB17_DATA2(val) bfin_write16(CAN0_MB17_DATA2, val) +#define bfin_read_CAN0_MB17_DATA3() bfin_read16(CAN0_MB17_DATA3) +#define bfin_write_CAN0_MB17_DATA3(val) bfin_write16(CAN0_MB17_DATA3, val) +#define bfin_read_CAN0_MB17_LENGTH() bfin_read16(CAN0_MB17_LENGTH) +#define bfin_write_CAN0_MB17_LENGTH(val) bfin_write16(CAN0_MB17_LENGTH, val) +#define bfin_read_CAN0_MB17_TIMESTAMP() bfin_read16(CAN0_MB17_TIMESTAMP) +#define bfin_write_CAN0_MB17_TIMESTAMP(val) bfin_write16(CAN0_MB17_TIMESTAMP, val) +#define bfin_read_CAN0_MB17_ID0() bfin_read16(CAN0_MB17_ID0) +#define bfin_write_CAN0_MB17_ID0(val) bfin_write16(CAN0_MB17_ID0, val) +#define bfin_read_CAN0_MB17_ID1() bfin_read16(CAN0_MB17_ID1) +#define bfin_write_CAN0_MB17_ID1(val) bfin_write16(CAN0_MB17_ID1, val) +#define bfin_read_CAN0_MB18_DATA0() bfin_read16(CAN0_MB18_DATA0) +#define bfin_write_CAN0_MB18_DATA0(val) bfin_write16(CAN0_MB18_DATA0, val) +#define bfin_read_CAN0_MB18_DATA1() bfin_read16(CAN0_MB18_DATA1) +#define bfin_write_CAN0_MB18_DATA1(val) bfin_write16(CAN0_MB18_DATA1, val) +#define bfin_read_CAN0_MB18_DATA2() bfin_read16(CAN0_MB18_DATA2) +#define bfin_write_CAN0_MB18_DATA2(val) bfin_write16(CAN0_MB18_DATA2, val) +#define bfin_read_CAN0_MB18_DATA3() bfin_read16(CAN0_MB18_DATA3) +#define bfin_write_CAN0_MB18_DATA3(val) bfin_write16(CAN0_MB18_DATA3, val) +#define bfin_read_CAN0_MB18_LENGTH() bfin_read16(CAN0_MB18_LENGTH) +#define bfin_write_CAN0_MB18_LENGTH(val) bfin_write16(CAN0_MB18_LENGTH, val) +#define bfin_read_CAN0_MB18_TIMESTAMP() bfin_read16(CAN0_MB18_TIMESTAMP) +#define bfin_write_CAN0_MB18_TIMESTAMP(val) bfin_write16(CAN0_MB18_TIMESTAMP, val) +#define bfin_read_CAN0_MB18_ID0() bfin_read16(CAN0_MB18_ID0) +#define bfin_write_CAN0_MB18_ID0(val) bfin_write16(CAN0_MB18_ID0, val) +#define bfin_read_CAN0_MB18_ID1() bfin_read16(CAN0_MB18_ID1) +#define bfin_write_CAN0_MB18_ID1(val) bfin_write16(CAN0_MB18_ID1, val) +#define bfin_read_CAN0_MB19_DATA0() bfin_read16(CAN0_MB19_DATA0) +#define bfin_write_CAN0_MB19_DATA0(val) bfin_write16(CAN0_MB19_DATA0, val) +#define bfin_read_CAN0_MB19_DATA1() bfin_read16(CAN0_MB19_DATA1) +#define bfin_write_CAN0_MB19_DATA1(val) bfin_write16(CAN0_MB19_DATA1, val) +#define bfin_read_CAN0_MB19_DATA2() bfin_read16(CAN0_MB19_DATA2) +#define bfin_write_CAN0_MB19_DATA2(val) bfin_write16(CAN0_MB19_DATA2, val) +#define bfin_read_CAN0_MB19_DATA3() bfin_read16(CAN0_MB19_DATA3) +#define bfin_write_CAN0_MB19_DATA3(val) bfin_write16(CAN0_MB19_DATA3, val) +#define bfin_read_CAN0_MB19_LENGTH() bfin_read16(CAN0_MB19_LENGTH) +#define bfin_write_CAN0_MB19_LENGTH(val) bfin_write16(CAN0_MB19_LENGTH, val) +#define bfin_read_CAN0_MB19_TIMESTAMP() bfin_read16(CAN0_MB19_TIMESTAMP) +#define bfin_write_CAN0_MB19_TIMESTAMP(val) bfin_write16(CAN0_MB19_TIMESTAMP, val) +#define bfin_read_CAN0_MB19_ID0() bfin_read16(CAN0_MB19_ID0) +#define bfin_write_CAN0_MB19_ID0(val) bfin_write16(CAN0_MB19_ID0, val) +#define bfin_read_CAN0_MB19_ID1() bfin_read16(CAN0_MB19_ID1) +#define bfin_write_CAN0_MB19_ID1(val) bfin_write16(CAN0_MB19_ID1, val) +#define bfin_read_CAN0_MB20_DATA0() bfin_read16(CAN0_MB20_DATA0) +#define bfin_write_CAN0_MB20_DATA0(val) bfin_write16(CAN0_MB20_DATA0, val) +#define bfin_read_CAN0_MB20_DATA1() bfin_read16(CAN0_MB20_DATA1) +#define bfin_write_CAN0_MB20_DATA1(val) bfin_write16(CAN0_MB20_DATA1, val) +#define bfin_read_CAN0_MB20_DATA2() bfin_read16(CAN0_MB20_DATA2) +#define bfin_write_CAN0_MB20_DATA2(val) bfin_write16(CAN0_MB20_DATA2, val) +#define bfin_read_CAN0_MB20_DATA3() bfin_read16(CAN0_MB20_DATA3) +#define bfin_write_CAN0_MB20_DATA3(val) bfin_write16(CAN0_MB20_DATA3, val) +#define bfin_read_CAN0_MB20_LENGTH() bfin_read16(CAN0_MB20_LENGTH) +#define bfin_write_CAN0_MB20_LENGTH(val) bfin_write16(CAN0_MB20_LENGTH, val) +#define bfin_read_CAN0_MB20_TIMESTAMP() bfin_read16(CAN0_MB20_TIMESTAMP) +#define bfin_write_CAN0_MB20_TIMESTAMP(val) bfin_write16(CAN0_MB20_TIMESTAMP, val) +#define bfin_read_CAN0_MB20_ID0() bfin_read16(CAN0_MB20_ID0) +#define bfin_write_CAN0_MB20_ID0(val) bfin_write16(CAN0_MB20_ID0, val) +#define bfin_read_CAN0_MB20_ID1() bfin_read16(CAN0_MB20_ID1) +#define bfin_write_CAN0_MB20_ID1(val) bfin_write16(CAN0_MB20_ID1, val) +#define bfin_read_CAN0_MB21_DATA0() bfin_read16(CAN0_MB21_DATA0) +#define bfin_write_CAN0_MB21_DATA0(val) bfin_write16(CAN0_MB21_DATA0, val) +#define bfin_read_CAN0_MB21_DATA1() bfin_read16(CAN0_MB21_DATA1) +#define bfin_write_CAN0_MB21_DATA1(val) bfin_write16(CAN0_MB21_DATA1, val) +#define bfin_read_CAN0_MB21_DATA2() bfin_read16(CAN0_MB21_DATA2) +#define bfin_write_CAN0_MB21_DATA2(val) bfin_write16(CAN0_MB21_DATA2, val) +#define bfin_read_CAN0_MB21_DATA3() bfin_read16(CAN0_MB21_DATA3) +#define bfin_write_CAN0_MB21_DATA3(val) bfin_write16(CAN0_MB21_DATA3, val) +#define bfin_read_CAN0_MB21_LENGTH() bfin_read16(CAN0_MB21_LENGTH) +#define bfin_write_CAN0_MB21_LENGTH(val) bfin_write16(CAN0_MB21_LENGTH, val) +#define bfin_read_CAN0_MB21_TIMESTAMP() bfin_read16(CAN0_MB21_TIMESTAMP) +#define bfin_write_CAN0_MB21_TIMESTAMP(val) bfin_write16(CAN0_MB21_TIMESTAMP, val) +#define bfin_read_CAN0_MB21_ID0() bfin_read16(CAN0_MB21_ID0) +#define bfin_write_CAN0_MB21_ID0(val) bfin_write16(CAN0_MB21_ID0, val) +#define bfin_read_CAN0_MB21_ID1() bfin_read16(CAN0_MB21_ID1) +#define bfin_write_CAN0_MB21_ID1(val) bfin_write16(CAN0_MB21_ID1, val) +#define bfin_read_CAN0_MB22_DATA0() bfin_read16(CAN0_MB22_DATA0) +#define bfin_write_CAN0_MB22_DATA0(val) bfin_write16(CAN0_MB22_DATA0, val) +#define bfin_read_CAN0_MB22_DATA1() bfin_read16(CAN0_MB22_DATA1) +#define bfin_write_CAN0_MB22_DATA1(val) bfin_write16(CAN0_MB22_DATA1, val) +#define bfin_read_CAN0_MB22_DATA2() bfin_read16(CAN0_MB22_DATA2) +#define bfin_write_CAN0_MB22_DATA2(val) bfin_write16(CAN0_MB22_DATA2, val) +#define bfin_read_CAN0_MB22_DATA3() bfin_read16(CAN0_MB22_DATA3) +#define bfin_write_CAN0_MB22_DATA3(val) bfin_write16(CAN0_MB22_DATA3, val) +#define bfin_read_CAN0_MB22_LENGTH() bfin_read16(CAN0_MB22_LENGTH) +#define bfin_write_CAN0_MB22_LENGTH(val) bfin_write16(CAN0_MB22_LENGTH, val) +#define bfin_read_CAN0_MB22_TIMESTAMP() bfin_read16(CAN0_MB22_TIMESTAMP) +#define bfin_write_CAN0_MB22_TIMESTAMP(val) bfin_write16(CAN0_MB22_TIMESTAMP, val) +#define bfin_read_CAN0_MB22_ID0() bfin_read16(CAN0_MB22_ID0) +#define bfin_write_CAN0_MB22_ID0(val) bfin_write16(CAN0_MB22_ID0, val) +#define bfin_read_CAN0_MB22_ID1() bfin_read16(CAN0_MB22_ID1) +#define bfin_write_CAN0_MB22_ID1(val) bfin_write16(CAN0_MB22_ID1, val) +#define bfin_read_CAN0_MB23_DATA0() bfin_read16(CAN0_MB23_DATA0) +#define bfin_write_CAN0_MB23_DATA0(val) bfin_write16(CAN0_MB23_DATA0, val) +#define bfin_read_CAN0_MB23_DATA1() bfin_read16(CAN0_MB23_DATA1) +#define bfin_write_CAN0_MB23_DATA1(val) bfin_write16(CAN0_MB23_DATA1, val) +#define bfin_read_CAN0_MB23_DATA2() bfin_read16(CAN0_MB23_DATA2) +#define bfin_write_CAN0_MB23_DATA2(val) bfin_write16(CAN0_MB23_DATA2, val) +#define bfin_read_CAN0_MB23_DATA3() bfin_read16(CAN0_MB23_DATA3) +#define bfin_write_CAN0_MB23_DATA3(val) bfin_write16(CAN0_MB23_DATA3, val) +#define bfin_read_CAN0_MB23_LENGTH() bfin_read16(CAN0_MB23_LENGTH) +#define bfin_write_CAN0_MB23_LENGTH(val) bfin_write16(CAN0_MB23_LENGTH, val) +#define bfin_read_CAN0_MB23_TIMESTAMP() bfin_read16(CAN0_MB23_TIMESTAMP) +#define bfin_write_CAN0_MB23_TIMESTAMP(val) bfin_write16(CAN0_MB23_TIMESTAMP, val) +#define bfin_read_CAN0_MB23_ID0() bfin_read16(CAN0_MB23_ID0) +#define bfin_write_CAN0_MB23_ID0(val) bfin_write16(CAN0_MB23_ID0, val) +#define bfin_read_CAN0_MB23_ID1() bfin_read16(CAN0_MB23_ID1) +#define bfin_write_CAN0_MB23_ID1(val) bfin_write16(CAN0_MB23_ID1, val) +#define bfin_read_CAN0_MB24_DATA0() bfin_read16(CAN0_MB24_DATA0) +#define bfin_write_CAN0_MB24_DATA0(val) bfin_write16(CAN0_MB24_DATA0, val) +#define bfin_read_CAN0_MB24_DATA1() bfin_read16(CAN0_MB24_DATA1) +#define bfin_write_CAN0_MB24_DATA1(val) bfin_write16(CAN0_MB24_DATA1, val) +#define bfin_read_CAN0_MB24_DATA2() bfin_read16(CAN0_MB24_DATA2) +#define bfin_write_CAN0_MB24_DATA2(val) bfin_write16(CAN0_MB24_DATA2, val) +#define bfin_read_CAN0_MB24_DATA3() bfin_read16(CAN0_MB24_DATA3) +#define bfin_write_CAN0_MB24_DATA3(val) bfin_write16(CAN0_MB24_DATA3, val) +#define bfin_read_CAN0_MB24_LENGTH() bfin_read16(CAN0_MB24_LENGTH) +#define bfin_write_CAN0_MB24_LENGTH(val) bfin_write16(CAN0_MB24_LENGTH, val) +#define bfin_read_CAN0_MB24_TIMESTAMP() bfin_read16(CAN0_MB24_TIMESTAMP) +#define bfin_write_CAN0_MB24_TIMESTAMP(val) bfin_write16(CAN0_MB24_TIMESTAMP, val) +#define bfin_read_CAN0_MB24_ID0() bfin_read16(CAN0_MB24_ID0) +#define bfin_write_CAN0_MB24_ID0(val) bfin_write16(CAN0_MB24_ID0, val) +#define bfin_read_CAN0_MB24_ID1() bfin_read16(CAN0_MB24_ID1) +#define bfin_write_CAN0_MB24_ID1(val) bfin_write16(CAN0_MB24_ID1, val) +#define bfin_read_CAN0_MB25_DATA0() bfin_read16(CAN0_MB25_DATA0) +#define bfin_write_CAN0_MB25_DATA0(val) bfin_write16(CAN0_MB25_DATA0, val) +#define bfin_read_CAN0_MB25_DATA1() bfin_read16(CAN0_MB25_DATA1) +#define bfin_write_CAN0_MB25_DATA1(val) bfin_write16(CAN0_MB25_DATA1, val) +#define bfin_read_CAN0_MB25_DATA2() bfin_read16(CAN0_MB25_DATA2) +#define bfin_write_CAN0_MB25_DATA2(val) bfin_write16(CAN0_MB25_DATA2, val) +#define bfin_read_CAN0_MB25_DATA3() bfin_read16(CAN0_MB25_DATA3) +#define bfin_write_CAN0_MB25_DATA3(val) bfin_write16(CAN0_MB25_DATA3, val) +#define bfin_read_CAN0_MB25_LENGTH() bfin_read16(CAN0_MB25_LENGTH) +#define bfin_write_CAN0_MB25_LENGTH(val) bfin_write16(CAN0_MB25_LENGTH, val) +#define bfin_read_CAN0_MB25_TIMESTAMP() bfin_read16(CAN0_MB25_TIMESTAMP) +#define bfin_write_CAN0_MB25_TIMESTAMP(val) bfin_write16(CAN0_MB25_TIMESTAMP, val) +#define bfin_read_CAN0_MB25_ID0() bfin_read16(CAN0_MB25_ID0) +#define bfin_write_CAN0_MB25_ID0(val) bfin_write16(CAN0_MB25_ID0, val) +#define bfin_read_CAN0_MB25_ID1() bfin_read16(CAN0_MB25_ID1) +#define bfin_write_CAN0_MB25_ID1(val) bfin_write16(CAN0_MB25_ID1, val) +#define bfin_read_CAN0_MB26_DATA0() bfin_read16(CAN0_MB26_DATA0) +#define bfin_write_CAN0_MB26_DATA0(val) bfin_write16(CAN0_MB26_DATA0, val) +#define bfin_read_CAN0_MB26_DATA1() bfin_read16(CAN0_MB26_DATA1) +#define bfin_write_CAN0_MB26_DATA1(val) bfin_write16(CAN0_MB26_DATA1, val) +#define bfin_read_CAN0_MB26_DATA2() bfin_read16(CAN0_MB26_DATA2) +#define bfin_write_CAN0_MB26_DATA2(val) bfin_write16(CAN0_MB26_DATA2, val) +#define bfin_read_CAN0_MB26_DATA3() bfin_read16(CAN0_MB26_DATA3) +#define bfin_write_CAN0_MB26_DATA3(val) bfin_write16(CAN0_MB26_DATA3, val) +#define bfin_read_CAN0_MB26_LENGTH() bfin_read16(CAN0_MB26_LENGTH) +#define bfin_write_CAN0_MB26_LENGTH(val) bfin_write16(CAN0_MB26_LENGTH, val) +#define bfin_read_CAN0_MB26_TIMESTAMP() bfin_read16(CAN0_MB26_TIMESTAMP) +#define bfin_write_CAN0_MB26_TIMESTAMP(val) bfin_write16(CAN0_MB26_TIMESTAMP, val) +#define bfin_read_CAN0_MB26_ID0() bfin_read16(CAN0_MB26_ID0) +#define bfin_write_CAN0_MB26_ID0(val) bfin_write16(CAN0_MB26_ID0, val) +#define bfin_read_CAN0_MB26_ID1() bfin_read16(CAN0_MB26_ID1) +#define bfin_write_CAN0_MB26_ID1(val) bfin_write16(CAN0_MB26_ID1, val) +#define bfin_read_CAN0_MB27_DATA0() bfin_read16(CAN0_MB27_DATA0) +#define bfin_write_CAN0_MB27_DATA0(val) bfin_write16(CAN0_MB27_DATA0, val) +#define bfin_read_CAN0_MB27_DATA1() bfin_read16(CAN0_MB27_DATA1) +#define bfin_write_CAN0_MB27_DATA1(val) bfin_write16(CAN0_MB27_DATA1, val) +#define bfin_read_CAN0_MB27_DATA2() bfin_read16(CAN0_MB27_DATA2) +#define bfin_write_CAN0_MB27_DATA2(val) bfin_write16(CAN0_MB27_DATA2, val) +#define bfin_read_CAN0_MB27_DATA3() bfin_read16(CAN0_MB27_DATA3) +#define bfin_write_CAN0_MB27_DATA3(val) bfin_write16(CAN0_MB27_DATA3, val) +#define bfin_read_CAN0_MB27_LENGTH() bfin_read16(CAN0_MB27_LENGTH) +#define bfin_write_CAN0_MB27_LENGTH(val) bfin_write16(CAN0_MB27_LENGTH, val) +#define bfin_read_CAN0_MB27_TIMESTAMP() bfin_read16(CAN0_MB27_TIMESTAMP) +#define bfin_write_CAN0_MB27_TIMESTAMP(val) bfin_write16(CAN0_MB27_TIMESTAMP, val) +#define bfin_read_CAN0_MB27_ID0() bfin_read16(CAN0_MB27_ID0) +#define bfin_write_CAN0_MB27_ID0(val) bfin_write16(CAN0_MB27_ID0, val) +#define bfin_read_CAN0_MB27_ID1() bfin_read16(CAN0_MB27_ID1) +#define bfin_write_CAN0_MB27_ID1(val) bfin_write16(CAN0_MB27_ID1, val) +#define bfin_read_CAN0_MB28_DATA0() bfin_read16(CAN0_MB28_DATA0) +#define bfin_write_CAN0_MB28_DATA0(val) bfin_write16(CAN0_MB28_DATA0, val) +#define bfin_read_CAN0_MB28_DATA1() bfin_read16(CAN0_MB28_DATA1) +#define bfin_write_CAN0_MB28_DATA1(val) bfin_write16(CAN0_MB28_DATA1, val) +#define bfin_read_CAN0_MB28_DATA2() bfin_read16(CAN0_MB28_DATA2) +#define bfin_write_CAN0_MB28_DATA2(val) bfin_write16(CAN0_MB28_DATA2, val) +#define bfin_read_CAN0_MB28_DATA3() bfin_read16(CAN0_MB28_DATA3) +#define bfin_write_CAN0_MB28_DATA3(val) bfin_write16(CAN0_MB28_DATA3, val) +#define bfin_read_CAN0_MB28_LENGTH() bfin_read16(CAN0_MB28_LENGTH) +#define bfin_write_CAN0_MB28_LENGTH(val) bfin_write16(CAN0_MB28_LENGTH, val) +#define bfin_read_CAN0_MB28_TIMESTAMP() bfin_read16(CAN0_MB28_TIMESTAMP) +#define bfin_write_CAN0_MB28_TIMESTAMP(val) bfin_write16(CAN0_MB28_TIMESTAMP, val) +#define bfin_read_CAN0_MB28_ID0() bfin_read16(CAN0_MB28_ID0) +#define bfin_write_CAN0_MB28_ID0(val) bfin_write16(CAN0_MB28_ID0, val) +#define bfin_read_CAN0_MB28_ID1() bfin_read16(CAN0_MB28_ID1) +#define bfin_write_CAN0_MB28_ID1(val) bfin_write16(CAN0_MB28_ID1, val) +#define bfin_read_CAN0_MB29_DATA0() bfin_read16(CAN0_MB29_DATA0) +#define bfin_write_CAN0_MB29_DATA0(val) bfin_write16(CAN0_MB29_DATA0, val) +#define bfin_read_CAN0_MB29_DATA1() bfin_read16(CAN0_MB29_DATA1) +#define bfin_write_CAN0_MB29_DATA1(val) bfin_write16(CAN0_MB29_DATA1, val) +#define bfin_read_CAN0_MB29_DATA2() bfin_read16(CAN0_MB29_DATA2) +#define bfin_write_CAN0_MB29_DATA2(val) bfin_write16(CAN0_MB29_DATA2, val) +#define bfin_read_CAN0_MB29_DATA3() bfin_read16(CAN0_MB29_DATA3) +#define bfin_write_CAN0_MB29_DATA3(val) bfin_write16(CAN0_MB29_DATA3, val) +#define bfin_read_CAN0_MB29_LENGTH() bfin_read16(CAN0_MB29_LENGTH) +#define bfin_write_CAN0_MB29_LENGTH(val) bfin_write16(CAN0_MB29_LENGTH, val) +#define bfin_read_CAN0_MB29_TIMESTAMP() bfin_read16(CAN0_MB29_TIMESTAMP) +#define bfin_write_CAN0_MB29_TIMESTAMP(val) bfin_write16(CAN0_MB29_TIMESTAMP, val) +#define bfin_read_CAN0_MB29_ID0() bfin_read16(CAN0_MB29_ID0) +#define bfin_write_CAN0_MB29_ID0(val) bfin_write16(CAN0_MB29_ID0, val) +#define bfin_read_CAN0_MB29_ID1() bfin_read16(CAN0_MB29_ID1) +#define bfin_write_CAN0_MB29_ID1(val) bfin_write16(CAN0_MB29_ID1, val) +#define bfin_read_CAN0_MB30_DATA0() bfin_read16(CAN0_MB30_DATA0) +#define bfin_write_CAN0_MB30_DATA0(val) bfin_write16(CAN0_MB30_DATA0, val) +#define bfin_read_CAN0_MB30_DATA1() bfin_read16(CAN0_MB30_DATA1) +#define bfin_write_CAN0_MB30_DATA1(val) bfin_write16(CAN0_MB30_DATA1, val) +#define bfin_read_CAN0_MB30_DATA2() bfin_read16(CAN0_MB30_DATA2) +#define bfin_write_CAN0_MB30_DATA2(val) bfin_write16(CAN0_MB30_DATA2, val) +#define bfin_read_CAN0_MB30_DATA3() bfin_read16(CAN0_MB30_DATA3) +#define bfin_write_CAN0_MB30_DATA3(val) bfin_write16(CAN0_MB30_DATA3, val) +#define bfin_read_CAN0_MB30_LENGTH() bfin_read16(CAN0_MB30_LENGTH) +#define bfin_write_CAN0_MB30_LENGTH(val) bfin_write16(CAN0_MB30_LENGTH, val) +#define bfin_read_CAN0_MB30_TIMESTAMP() bfin_read16(CAN0_MB30_TIMESTAMP) +#define bfin_write_CAN0_MB30_TIMESTAMP(val) bfin_write16(CAN0_MB30_TIMESTAMP, val) +#define bfin_read_CAN0_MB30_ID0() bfin_read16(CAN0_MB30_ID0) +#define bfin_write_CAN0_MB30_ID0(val) bfin_write16(CAN0_MB30_ID0, val) +#define bfin_read_CAN0_MB30_ID1() bfin_read16(CAN0_MB30_ID1) +#define bfin_write_CAN0_MB30_ID1(val) bfin_write16(CAN0_MB30_ID1, val) +#define bfin_read_CAN0_MB31_DATA0() bfin_read16(CAN0_MB31_DATA0) +#define bfin_write_CAN0_MB31_DATA0(val) bfin_write16(CAN0_MB31_DATA0, val) +#define bfin_read_CAN0_MB31_DATA1() bfin_read16(CAN0_MB31_DATA1) +#define bfin_write_CAN0_MB31_DATA1(val) bfin_write16(CAN0_MB31_DATA1, val) +#define bfin_read_CAN0_MB31_DATA2() bfin_read16(CAN0_MB31_DATA2) +#define bfin_write_CAN0_MB31_DATA2(val) bfin_write16(CAN0_MB31_DATA2, val) +#define bfin_read_CAN0_MB31_DATA3() bfin_read16(CAN0_MB31_DATA3) +#define bfin_write_CAN0_MB31_DATA3(val) bfin_write16(CAN0_MB31_DATA3, val) +#define bfin_read_CAN0_MB31_LENGTH() bfin_read16(CAN0_MB31_LENGTH) +#define bfin_write_CAN0_MB31_LENGTH(val) bfin_write16(CAN0_MB31_LENGTH, val) +#define bfin_read_CAN0_MB31_TIMESTAMP() bfin_read16(CAN0_MB31_TIMESTAMP) +#define bfin_write_CAN0_MB31_TIMESTAMP(val) bfin_write16(CAN0_MB31_TIMESTAMP, val) +#define bfin_read_CAN0_MB31_ID0() bfin_read16(CAN0_MB31_ID0) +#define bfin_write_CAN0_MB31_ID0(val) bfin_write16(CAN0_MB31_ID0, val) +#define bfin_read_CAN0_MB31_ID1() bfin_read16(CAN0_MB31_ID1) +#define bfin_write_CAN0_MB31_ID1(val) bfin_write16(CAN0_MB31_ID1, val) + +/* UART3 Registers */ + +#define bfin_read_UART3_DLL() bfin_read16(UART3_DLL) +#define bfin_write_UART3_DLL(val) bfin_write16(UART3_DLL, val) +#define bfin_read_UART3_DLH() bfin_read16(UART3_DLH) +#define bfin_write_UART3_DLH(val) bfin_write16(UART3_DLH, val) +#define bfin_read_UART3_GCTL() bfin_read16(UART3_GCTL) +#define bfin_write_UART3_GCTL(val) bfin_write16(UART3_GCTL, val) +#define bfin_read_UART3_LCR() bfin_read16(UART3_LCR) +#define bfin_write_UART3_LCR(val) bfin_write16(UART3_LCR, val) +#define bfin_read_UART3_MCR() bfin_read16(UART3_MCR) +#define bfin_write_UART3_MCR(val) bfin_write16(UART3_MCR, val) +#define bfin_read_UART3_LSR() bfin_read16(UART3_LSR) +#define bfin_write_UART3_LSR(val) bfin_write16(UART3_LSR, val) +#define bfin_read_UART3_MSR() bfin_read16(UART3_MSR) +#define bfin_write_UART3_MSR(val) bfin_write16(UART3_MSR, val) +#define bfin_read_UART3_SCR() bfin_read16(UART3_SCR) +#define bfin_write_UART3_SCR(val) bfin_write16(UART3_SCR, val) +#define bfin_read_UART3_IER_SET() bfin_read16(UART3_IER_SET) +#define bfin_write_UART3_IER_SET(val) bfin_write16(UART3_IER_SET, val) +#define bfin_read_UART3_IER_CLEAR() bfin_read16(UART3_IER_CLEAR) +#define bfin_write_UART3_IER_CLEAR(val) bfin_write16(UART3_IER_CLEAR, val) +#define bfin_read_UART3_THR() bfin_read16(UART3_THR) +#define bfin_write_UART3_THR(val) bfin_write16(UART3_THR, val) +#define bfin_read_UART3_RBR() bfin_read16(UART3_RBR) +#define bfin_write_UART3_RBR(val) bfin_write16(UART3_RBR, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* DMA Peribfin_read_()heral Mux Register */ + +#define bfin_read_DMAC1_PERIMUX() bfin_read16(DMAC1_PERIMUX) +#define bfin_write_DMAC1_PERIMUX(val) bfin_write16(DMAC1_PERIMUX, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */ + +/* legacy definitions */ +#define bfin_read_EBIU_AMCBCTL0 bfin_read_EBIU_AMBCTL0 +#define bfin_write_EBIU_AMCBCTL0 bfin_write_EBIU_AMBCTL0 +#define bfin_read_EBIU_AMCBCTL1 bfin_read_EBIU_AMBCTL1 +#define bfin_write_EBIU_AMCBCTL1 bfin_write_EBIU_AMBCTL1 +#define bfin_read_PINT0_IRQ bfin_read_PINT0_REQUEST +#define bfin_write_PINT0_IRQ bfin_write_PINT0_REQUEST +#define bfin_read_PINT1_IRQ bfin_read_PINT1_REQUEST +#define bfin_write_PINT1_IRQ bfin_write_PINT1_REQUEST +#define bfin_read_PINT2_IRQ bfin_read_PINT2_REQUEST +#define bfin_write_PINT2_IRQ bfin_write_PINT2_REQUEST +#define bfin_read_PINT3_IRQ bfin_read_PINT3_REQUEST +#define bfin_write_PINT3_IRQ bfin_write_PINT3_REQUEST + +#endif /* _CDEF_BF54X_H */ + diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h new file mode 100644 index 00000000000..b1316541b8d --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -0,0 +1,925 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF542.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF542_H +#define _DEF_BF542_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF542 that are not in the common header */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define XFER_DIR 0x8 /* Transfer Direction */ +#define IORDY_EN 0x10 /* IORDY Enable */ +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define SOFT_RST 0x40 /* Soft Reset */ +#define DEV_RST 0x80 /* Device Reset */ +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define RESUME_MODE 0x4 /* DMA Mode */ +#define RESET 0x8 /* Reset indicator */ +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define SOFT_CONN 0x40 /* Soft connect */ +#define ISO_UPDATE 0x80 /* Isochronous update */ + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define RESUME_B 0x2 /* Resume indicator */ +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define SOF_B 0x8 /* Start of frame */ +#define CONN_B 0x10 /* Connection indicator */ +#define DISCON_B 0x20 /* Disconnect indicator */ +#define SESSION_REQ_B 0x40 /* Session Request */ +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define SOF_BE 0x8 /* Start of frame int enable */ +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define HOST_REQ 0x2 /* Host negotiation request */ +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define LSDEV 0x20 /* Low-speed indicator */ +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define DATAEND 0x8 /* Data end indicator */ +#define SETUPEND 0x10 /* Setup end */ +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_TH 0x4 /* error condition host mode */ +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define MODE 0x4 /* DMA Bus error */ +#define INT_ENA 0x8 /* Interrupt enable */ +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF542_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h new file mode 100644 index 00000000000..c2c785bdc5f --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -0,0 +1,707 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF544.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF544_H +#define _DEF_BF544_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF544 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_REGBASE 0xffc02200 +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define IMG_FORM 0x8 /* Image Data Format */ +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define OUT_FORM 0x20 /* Output Data Format */ +#define UDS_MOD 0x40 /* Resampling Mode */ +#define TC_EN 0x80 /* Transparent Color Enable */ +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define HOST_END 0x2 /* Host Endianess */ +#define DATA_SIZE 0x4 /* Data Size */ +#define HOST_RST 0x8 /* Host Reset */ +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define INT_MODE 0x40 /* Interrupt Mode */ +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define EHW 0x100 /* Enable Host Write */ +#define EHR 0x200 /* Enable Host Read */ +#define BDR 0x400 /* Burst DMA Requests */ + +/* Bit masks for HOST_STATUS */ + +#define DMA_READY 0x1 /* DMA Ready */ +#define FIFOFULL 0x2 /* FIFO Full */ +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define COMPLETE 0x8 /* DMA Complete */ +#define HSHK 0x10 /* Host Handshake */ +#define TIMEOUT 0x20 /* Host Timeout */ +#define HIRQ 0x40 /* Host Interrupt Request */ +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define DMA_DIR 0x100 /* DMA Direction */ +#define BTE 0x200 /* Bus Timeout Enabled */ + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define TIMEN10 0x4 /* Timer 10 Enable */ + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define TIMDIS10 0x4 /* Timer 10 Disable */ + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define UTE 0x8 /* Urgency Threshold Enable */ +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define PS 0x2000 /* Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +#endif /* _DEF_BF544_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h new file mode 100644 index 00000000000..661f0d877bd --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -0,0 +1,1244 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF547.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF548_H +#define _DEF_BF548_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_REGBASE 0xffc02200 +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_REGBASE 0xffc02400 +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define IMG_FORM 0x8 /* Image Data Format */ +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define OUT_FORM 0x20 /* Output Data Format */ +#define UDS_MOD 0x40 /* Resampling Mode */ +#define TC_EN 0x80 /* Transparent Color Enable */ +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define HOST_END 0x2 /* Host Endianess */ +#define DATA_SIZE 0x4 /* Data Size */ +#define HOST_RST 0x8 /* Host Reset */ +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define INT_MODE 0x40 /* Interrupt Mode */ +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define EHW 0x100 /* Enable Host Write */ +#define EHR 0x200 /* Enable Host Read */ +#define BDR 0x400 /* Burst DMA Requests */ + +/* Bit masks for HOST_STATUS */ + +#define DMA_READY 0x1 /* DMA Ready */ +#define FIFOFULL 0x2 /* FIFO Full */ +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ +#define HSHK 0x10 /* Host Handshake */ +#define HSTIMEOUT 0x20 /* Host Timeout */ +#define HIRQ 0x40 /* Host Interrupt Request */ +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define DMA_DIR 0x100 /* DMA Direction */ +#define BTE 0x200 /* Bus Timeout Enabled */ + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define XFER_DIR 0x8 /* Transfer Direction */ +#define IORDY_EN 0x10 /* IORDY Enable */ +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define SOFT_RST 0x40 /* Soft Reset */ +#define DEV_RST 0x80 /* Device Reset */ +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define TIMEN10 0x4 /* Timer 10 Enable */ + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define TIMDIS10 0x4 /* Timer 10 Disable */ + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define RESUME_MODE 0x4 /* DMA Mode */ +#define RESET 0x8 /* Reset indicator */ +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define SOFT_CONN 0x40 /* Soft connect */ +#define ISO_UPDATE 0x80 /* Isochronous update */ + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define RESUME_B 0x2 /* Resume indicator */ +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define SOF_B 0x8 /* Start of frame */ +#define CONN_B 0x10 /* Connection indicator */ +#define DISCON_B 0x20 /* Disconnect indicator */ +#define SESSION_REQ_B 0x40 /* Session Request */ +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define SOF_BE 0x8 /* Start of frame int enable */ +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define HOST_REQ 0x2 /* Host negotiation request */ +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define LSDEV 0x20 /* Low-speed indicator */ +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define DATAEND 0x8 /* Data end indicator */ +#define SETUPEND 0x10 /* Setup end */ +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_TH 0x4 /* error condition host mode */ +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define MODE 0x4 /* DMA Bus error */ +#define INT_ENA 0x8 /* Interrupt enable */ +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define UTE 0x8 /* Urgency Threshold Enable */ +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define PS 0x2000 /* Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h new file mode 100644 index 00000000000..85d4bade911 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -0,0 +1,1627 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF548.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF548_H +#define _DEF_BF548_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_REGBASE 0xffc02200 +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_REGBASE 0xffc02400 +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define IMG_FORM 0x8 /* Image Data Format */ +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define OUT_FORM 0x20 /* Output Data Format */ +#define UDS_MOD 0x40 /* Resampling Mode */ +#define TC_EN 0x80 /* Transparent Color Enable */ +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define HOST_END 0x2 /* Host Endianess */ +#define DATA_SIZE 0x4 /* Data Size */ +#define HOST_RST 0x8 /* Host Reset */ +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define INT_MODE 0x40 /* Interrupt Mode */ +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define EHW 0x100 /* Enable Host Write */ +#define EHR 0x200 /* Enable Host Read */ +#define BDR 0x400 /* Burst DMA Requests */ + +/* Bit masks for HOST_STATUS */ + +#define DMA_READY 0x1 /* DMA Ready */ +#define FIFOFULL 0x2 /* FIFO Full */ +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ +#define HSHK 0x10 /* Host Handshake */ +#define HSTIMEOUT 0x20 /* Host Timeout */ +#define HIRQ 0x40 /* Host Interrupt Request */ +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define DMA_DIR 0x100 /* DMA Direction */ +#define BTE 0x200 /* Bus Timeout Enabled */ + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define XFER_DIR 0x8 /* Transfer Direction */ +#define IORDY_EN 0x10 /* IORDY Enable */ +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define SOFT_RST 0x40 /* Soft Reset */ +#define DEV_RST 0x80 /* Device Reset */ +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define TIMEN10 0x4 /* Timer 10 Enable */ + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define TIMDIS10 0x4 /* Timer 10 Disable */ + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define RESUME_MODE 0x4 /* DMA Mode */ +#define RESET 0x8 /* Reset indicator */ +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define SOFT_CONN 0x40 /* Soft connect */ +#define ISO_UPDATE 0x80 /* Isochronous update */ + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define RESUME_B 0x2 /* Resume indicator */ +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define SOF_B 0x8 /* Start of frame */ +#define CONN_B 0x10 /* Connection indicator */ +#define DISCON_B 0x20 /* Disconnect indicator */ +#define SESSION_REQ_B 0x40 /* Session Request */ +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define SOF_BE 0x8 /* Start of frame int enable */ +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define HOST_REQ 0x2 /* Host negotiation request */ +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define LSDEV 0x20 /* Low-speed indicator */ +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define DATAEND 0x8 /* Data end indicator */ +#define SETUPEND 0x10 /* Setup end */ +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_TH 0x4 /* error condition host mode */ +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define MODE 0x4 /* DMA Bus error */ +#define INT_ENA 0x8 /* Interrupt enable */ +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define UTE 0x8 /* Urgency Threshold Enable */ +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define PS 0x2000 /* Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF548_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h new file mode 100644 index 00000000000..09673454164 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -0,0 +1,2737 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF549.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF549_H +#define _DEF_BF549_H + +/* Include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_REGBASE 0xffc02200 +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_REGBASE 0xffc02400 +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* MXVR Registers */ + +#define MXVR_CONFIG 0xffc02700 /* MXVR Configuration Register */ +#define MXVR_STATE_0 0xffc02708 /* MXVR State Register 0 */ +#define MXVR_STATE_1 0xffc0270c /* MXVR State Register 1 */ +#define MXVR_INT_STAT_0 0xffc02710 /* MXVR Interrupt Status Register 0 */ +#define MXVR_INT_STAT_1 0xffc02714 /* MXVR Interrupt Status Register 1 */ +#define MXVR_INT_EN_0 0xffc02718 /* MXVR Interrupt Enable Register 0 */ +#define MXVR_INT_EN_1 0xffc0271c /* MXVR Interrupt Enable Register 1 */ +#define MXVR_POSITION 0xffc02720 /* MXVR Node Position Register */ +#define MXVR_MAX_POSITION 0xffc02724 /* MXVR Maximum Node Position Register */ +#define MXVR_DELAY 0xffc02728 /* MXVR Node Frame Delay Register */ +#define MXVR_MAX_DELAY 0xffc0272c /* MXVR Maximum Node Frame Delay Register */ +#define MXVR_LADDR 0xffc02730 /* MXVR Logical Address Register */ +#define MXVR_GADDR 0xffc02734 /* MXVR Group Address Register */ +#define MXVR_AADDR 0xffc02738 /* MXVR Alternate Address Register */ + +/* MXVR Allocation Table Registers */ + +#define MXVR_ALLOC_0 0xffc0273c /* MXVR Allocation Table Register 0 */ +#define MXVR_ALLOC_1 0xffc02740 /* MXVR Allocation Table Register 1 */ +#define MXVR_ALLOC_2 0xffc02744 /* MXVR Allocation Table Register 2 */ +#define MXVR_ALLOC_3 0xffc02748 /* MXVR Allocation Table Register 3 */ +#define MXVR_ALLOC_4 0xffc0274c /* MXVR Allocation Table Register 4 */ +#define MXVR_ALLOC_5 0xffc02750 /* MXVR Allocation Table Register 5 */ +#define MXVR_ALLOC_6 0xffc02754 /* MXVR Allocation Table Register 6 */ +#define MXVR_ALLOC_7 0xffc02758 /* MXVR Allocation Table Register 7 */ +#define MXVR_ALLOC_8 0xffc0275c /* MXVR Allocation Table Register 8 */ +#define MXVR_ALLOC_9 0xffc02760 /* MXVR Allocation Table Register 9 */ +#define MXVR_ALLOC_10 0xffc02764 /* MXVR Allocation Table Register 10 */ +#define MXVR_ALLOC_11 0xffc02768 /* MXVR Allocation Table Register 11 */ +#define MXVR_ALLOC_12 0xffc0276c /* MXVR Allocation Table Register 12 */ +#define MXVR_ALLOC_13 0xffc02770 /* MXVR Allocation Table Register 13 */ +#define MXVR_ALLOC_14 0xffc02774 /* MXVR Allocation Table Register 14 */ + +/* MXVR Channel Assign Registers */ + +#define MXVR_SYNC_LCHAN_0 0xffc02778 /* MXVR Sync Data Logical Channel Assign Register 0 */ +#define MXVR_SYNC_LCHAN_1 0xffc0277c /* MXVR Sync Data Logical Channel Assign Register 1 */ +#define MXVR_SYNC_LCHAN_2 0xffc02780 /* MXVR Sync Data Logical Channel Assign Register 2 */ +#define MXVR_SYNC_LCHAN_3 0xffc02784 /* MXVR Sync Data Logical Channel Assign Register 3 */ +#define MXVR_SYNC_LCHAN_4 0xffc02788 /* MXVR Sync Data Logical Channel Assign Register 4 */ +#define MXVR_SYNC_LCHAN_5 0xffc0278c /* MXVR Sync Data Logical Channel Assign Register 5 */ +#define MXVR_SYNC_LCHAN_6 0xffc02790 /* MXVR Sync Data Logical Channel Assign Register 6 */ +#define MXVR_SYNC_LCHAN_7 0xffc02794 /* MXVR Sync Data Logical Channel Assign Register 7 */ + +/* MXVR DMA0 Registers */ + +#define MXVR_DMA0_CONFIG 0xffc02798 /* MXVR Sync Data DMA0 Config Register */ +#define MXVR_DMA0_START_ADDR 0xffc0279c /* MXVR Sync Data DMA0 Start Address */ +#define MXVR_DMA0_COUNT 0xffc027a0 /* MXVR Sync Data DMA0 Loop Count Register */ +#define MXVR_DMA0_CURR_ADDR 0xffc027a4 /* MXVR Sync Data DMA0 Current Address */ +#define MXVR_DMA0_CURR_COUNT 0xffc027a8 /* MXVR Sync Data DMA0 Current Loop Count */ + +/* MXVR DMA1 Registers */ + +#define MXVR_DMA1_CONFIG 0xffc027ac /* MXVR Sync Data DMA1 Config Register */ +#define MXVR_DMA1_START_ADDR 0xffc027b0 /* MXVR Sync Data DMA1 Start Address */ +#define MXVR_DMA1_COUNT 0xffc027b4 /* MXVR Sync Data DMA1 Loop Count Register */ +#define MXVR_DMA1_CURR_ADDR 0xffc027b8 /* MXVR Sync Data DMA1 Current Address */ +#define MXVR_DMA1_CURR_COUNT 0xffc027bc /* MXVR Sync Data DMA1 Current Loop Count */ + +/* MXVR DMA2 Registers */ + +#define MXVR_DMA2_CONFIG 0xffc027c0 /* MXVR Sync Data DMA2 Config Register */ +#define MXVR_DMA2_START_ADDR 0xffc027c4 /* MXVR Sync Data DMA2 Start Address */ +#define MXVR_DMA2_COUNT 0xffc027c8 /* MXVR Sync Data DMA2 Loop Count Register */ +#define MXVR_DMA2_CURR_ADDR 0xffc027cc /* MXVR Sync Data DMA2 Current Address */ +#define MXVR_DMA2_CURR_COUNT 0xffc027d0 /* MXVR Sync Data DMA2 Current Loop Count */ + +/* MXVR DMA3 Registers */ + +#define MXVR_DMA3_CONFIG 0xffc027d4 /* MXVR Sync Data DMA3 Config Register */ +#define MXVR_DMA3_START_ADDR 0xffc027d8 /* MXVR Sync Data DMA3 Start Address */ +#define MXVR_DMA3_COUNT 0xffc027dc /* MXVR Sync Data DMA3 Loop Count Register */ +#define MXVR_DMA3_CURR_ADDR 0xffc027e0 /* MXVR Sync Data DMA3 Current Address */ +#define MXVR_DMA3_CURR_COUNT 0xffc027e4 /* MXVR Sync Data DMA3 Current Loop Count */ + +/* MXVR DMA4 Registers */ + +#define MXVR_DMA4_CONFIG 0xffc027e8 /* MXVR Sync Data DMA4 Config Register */ +#define MXVR_DMA4_START_ADDR 0xffc027ec /* MXVR Sync Data DMA4 Start Address */ +#define MXVR_DMA4_COUNT 0xffc027f0 /* MXVR Sync Data DMA4 Loop Count Register */ +#define MXVR_DMA4_CURR_ADDR 0xffc027f4 /* MXVR Sync Data DMA4 Current Address */ +#define MXVR_DMA4_CURR_COUNT 0xffc027f8 /* MXVR Sync Data DMA4 Current Loop Count */ + +/* MXVR DMA5 Registers */ + +#define MXVR_DMA5_CONFIG 0xffc027fc /* MXVR Sync Data DMA5 Config Register */ +#define MXVR_DMA5_START_ADDR 0xffc02800 /* MXVR Sync Data DMA5 Start Address */ +#define MXVR_DMA5_COUNT 0xffc02804 /* MXVR Sync Data DMA5 Loop Count Register */ +#define MXVR_DMA5_CURR_ADDR 0xffc02808 /* MXVR Sync Data DMA5 Current Address */ +#define MXVR_DMA5_CURR_COUNT 0xffc0280c /* MXVR Sync Data DMA5 Current Loop Count */ + +/* MXVR DMA6 Registers */ + +#define MXVR_DMA6_CONFIG 0xffc02810 /* MXVR Sync Data DMA6 Config Register */ +#define MXVR_DMA6_START_ADDR 0xffc02814 /* MXVR Sync Data DMA6 Start Address */ +#define MXVR_DMA6_COUNT 0xffc02818 /* MXVR Sync Data DMA6 Loop Count Register */ +#define MXVR_DMA6_CURR_ADDR 0xffc0281c /* MXVR Sync Data DMA6 Current Address */ +#define MXVR_DMA6_CURR_COUNT 0xffc02820 /* MXVR Sync Data DMA6 Current Loop Count */ + +/* MXVR DMA7 Registers */ + +#define MXVR_DMA7_CONFIG 0xffc02824 /* MXVR Sync Data DMA7 Config Register */ +#define MXVR_DMA7_START_ADDR 0xffc02828 /* MXVR Sync Data DMA7 Start Address */ +#define MXVR_DMA7_COUNT 0xffc0282c /* MXVR Sync Data DMA7 Loop Count Register */ +#define MXVR_DMA7_CURR_ADDR 0xffc02830 /* MXVR Sync Data DMA7 Current Address */ +#define MXVR_DMA7_CURR_COUNT 0xffc02834 /* MXVR Sync Data DMA7 Current Loop Count */ + +/* MXVR Asynch Packet Registers */ + +#define MXVR_AP_CTL 0xffc02838 /* MXVR Async Packet Control Register */ +#define MXVR_APRB_START_ADDR 0xffc0283c /* MXVR Async Packet RX Buffer Start Addr Register */ +#define MXVR_APRB_CURR_ADDR 0xffc02840 /* MXVR Async Packet RX Buffer Current Addr Register */ +#define MXVR_APTB_START_ADDR 0xffc02844 /* MXVR Async Packet TX Buffer Start Addr Register */ +#define MXVR_APTB_CURR_ADDR 0xffc02848 /* MXVR Async Packet TX Buffer Current Addr Register */ + +/* MXVR Control Message Registers */ + +#define MXVR_CM_CTL 0xffc0284c /* MXVR Control Message Control Register */ +#define MXVR_CMRB_START_ADDR 0xffc02850 /* MXVR Control Message RX Buffer Start Addr Register */ +#define MXVR_CMRB_CURR_ADDR 0xffc02854 /* MXVR Control Message RX Buffer Current Address */ +#define MXVR_CMTB_START_ADDR 0xffc02858 /* MXVR Control Message TX Buffer Start Addr Register */ +#define MXVR_CMTB_CURR_ADDR 0xffc0285c /* MXVR Control Message TX Buffer Current Address */ + +/* MXVR Remote Read Registers */ + +#define MXVR_RRDB_START_ADDR 0xffc02860 /* MXVR Remote Read Buffer Start Addr Register */ +#define MXVR_RRDB_CURR_ADDR 0xffc02864 /* MXVR Remote Read Buffer Current Addr Register */ + +/* MXVR Pattern Data Registers */ + +#define MXVR_PAT_DATA_0 0xffc02868 /* MXVR Pattern Data Register 0 */ +#define MXVR_PAT_EN_0 0xffc0286c /* MXVR Pattern Enable Register 0 */ +#define MXVR_PAT_DATA_1 0xffc02870 /* MXVR Pattern Data Register 1 */ +#define MXVR_PAT_EN_1 0xffc02874 /* MXVR Pattern Enable Register 1 */ + +/* MXVR Frame Counter Registers */ + +#define MXVR_FRAME_CNT_0 0xffc02878 /* MXVR Frame Counter 0 */ +#define MXVR_FRAME_CNT_1 0xffc0287c /* MXVR Frame Counter 1 */ + +/* MXVR Routing Table Registers */ + +#define MXVR_ROUTING_0 0xffc02880 /* MXVR Routing Table Register 0 */ +#define MXVR_ROUTING_1 0xffc02884 /* MXVR Routing Table Register 1 */ +#define MXVR_ROUTING_2 0xffc02888 /* MXVR Routing Table Register 2 */ +#define MXVR_ROUTING_3 0xffc0288c /* MXVR Routing Table Register 3 */ +#define MXVR_ROUTING_4 0xffc02890 /* MXVR Routing Table Register 4 */ +#define MXVR_ROUTING_5 0xffc02894 /* MXVR Routing Table Register 5 */ +#define MXVR_ROUTING_6 0xffc02898 /* MXVR Routing Table Register 6 */ +#define MXVR_ROUTING_7 0xffc0289c /* MXVR Routing Table Register 7 */ +#define MXVR_ROUTING_8 0xffc028a0 /* MXVR Routing Table Register 8 */ +#define MXVR_ROUTING_9 0xffc028a4 /* MXVR Routing Table Register 9 */ +#define MXVR_ROUTING_10 0xffc028a8 /* MXVR Routing Table Register 10 */ +#define MXVR_ROUTING_11 0xffc028ac /* MXVR Routing Table Register 11 */ +#define MXVR_ROUTING_12 0xffc028b0 /* MXVR Routing Table Register 12 */ +#define MXVR_ROUTING_13 0xffc028b4 /* MXVR Routing Table Register 13 */ +#define MXVR_ROUTING_14 0xffc028b8 /* MXVR Routing Table Register 14 */ + +/* MXVR Counter-Clock-Control Registers */ + +#define MXVR_BLOCK_CNT 0xffc028c0 /* MXVR Block Counter */ +#define MXVR_CLK_CTL 0xffc028d0 /* MXVR Clock Control Register */ +#define MXVR_CDRPLL_CTL 0xffc028d4 /* MXVR Clock/Data Recovery PLL Control Register */ +#define MXVR_FMPLL_CTL 0xffc028d8 /* MXVR Frequency Multiply PLL Control Register */ +#define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */ +#define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define IMG_FORM 0x8 /* Image Data Format */ +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define OUT_FORM 0x20 /* Output Data Format */ +#define UDS_MOD 0x40 /* Resampling Mode */ +#define TC_EN 0x80 /* Transparent Color Enable */ +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define HOST_END 0x2 /* Host Endianess */ +#define DATA_SIZE 0x4 /* Data Size */ +#define HOST_RST 0x8 /* Host Reset */ +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define INT_MODE 0x40 /* Interrupt Mode */ +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define EHW 0x100 /* Enable Host Write */ +#define EHR 0x200 /* Enable Host Read */ +#define BDR 0x400 /* Burst DMA Requests */ + +/* Bit masks for HOST_STATUS */ + +#define DMA_READY 0x1 /* DMA Ready */ +#define FIFOFULL 0x2 /* FIFO Full */ +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define DMA_COMPLETE 0x8 /* DMA Complete */ +#define HSHK 0x10 /* Host Handshake */ +#define TIMEOUT 0x20 /* Host Timeout */ +#define HIRQ 0x40 /* Host Interrupt Request */ +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define DMA_DIR 0x100 /* DMA Direction */ +#define BTE 0x200 /* Bus Timeout Enabled */ + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for MXVR_CONFIG */ + +#define MXVREN 0x1 /* MXVR Enable */ +#define MMSM 0x2 /* MXVR Master/Slave Mode Select */ +#define ACTIVE 0x4 /* Active Mode */ +#define SDELAY 0x8 /* Synchronous Data Delay */ +#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */ +#define RWRRXEN 0x20 /* Remote Write Receive Enable */ +#define MTXEN 0x40 /* MXVR Transmit Data Enable */ +#define MTXONB 0x80 /* MXVR Phy Transmitter On */ +#define EPARITY 0x100 /* Even Parity Select */ +#define MSB 0x1e00 /* Master Synchronous Boundary */ +#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */ +#define WAKEUP 0x4000 /* Wake-Up */ +#define LMECH 0x8000 /* Lock Mechanism Select */ + +/* Bit masks for MXVR_STATE_0 */ + +#define NACT 0x1 /* Network Activity */ +#define SBLOCK 0x2 /* Super Block Lock */ +#define FMPLLST 0xc /* Frequency Multiply PLL SM State */ +#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */ +#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */ +#define APARB 0x200 /* Asynchronous Packet Arbitrating */ +#define APTX 0x400 /* Asynchronous Packet Transmitting */ +#define APRX 0x800 /* Receiving Asynchronous Packet */ +#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */ +#define CMARB 0x2000 /* Control Message Arbitrating */ +#define CMTX 0x4000 /* Control Message Transmitting */ +#define CMRX 0x8000 /* Receiving Control Message */ +#define MRXONB 0x10000 /* MRXONB Pin State */ +#define RGSIP 0x20000 /* Remote Get Source In Progress */ +#define DALIP 0x40000 /* Resource Deallocate In Progress */ +#define ALIP 0x80000 /* Resource Allocate In Progress */ +#define RRDIP 0x100000 /* Remote Read In Progress */ +#define RWRIP 0x200000 /* Remote Write In Progress */ +#define FLOCK 0x400000 /* Frame Lock */ +#define BLOCK 0x800000 /* Block Lock */ +#define RSB 0xf000000 /* Received Synchronous Boundary */ +#define DERRNUM 0xf0000000 /* DMA Error Channel Number */ + +/* Bit masks for MXVR_STATE_1 */ + +#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */ +#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */ +#define APCONT 0x100 /* Asynchronous Packet Continuation */ +#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */ +#define DMAACTIVE0 0x10000 /* DMA0 Active */ +#define DMAACTIVE1 0x20000 /* DMA1 Active */ +#define DMAACTIVE2 0x40000 /* DMA2 Active */ +#define DMAACTIVE3 0x80000 /* DMA3 Active */ +#define DMAACTIVE4 0x100000 /* DMA4 Active */ +#define DMAACTIVE5 0x200000 /* DMA5 Active */ +#define DMAACTIVE6 0x400000 /* DMA6 Active */ +#define DMAACTIVE7 0x800000 /* DMA7 Active */ +#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */ +#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */ +#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */ +#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */ +#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */ +#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */ +#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */ +#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */ + +/* Bit masks for MXVR_INT_STAT_0 */ + +#define NI2A 0x1 /* Network Inactive to Active */ +#define NA2I 0x2 /* Network Active to Inactive */ +#define SBU2L 0x4 /* Super Block Unlock to Lock */ +#define SBL2U 0x8 /* Super Block Lock to Unlock */ +#define PRU 0x10 /* Position Register Updated */ +#define MPRU 0x20 /* Maximum Position Register Updated */ +#define DRU 0x40 /* Delay Register Updated */ +#define MDRU 0x80 /* Maximum Delay Register Updated */ +#define SBU 0x100 /* Synchronous Boundary Updated */ +#define ATU 0x200 /* Allocation Table Updated */ +#define FCZ0 0x400 /* Frame Counter 0 Zero */ +#define FCZ1 0x800 /* Frame Counter 1 Zero */ +#define PERR 0x1000 /* Parity Error */ +#define MH2L 0x2000 /* MRXONB High to Low */ +#define ML2H 0x4000 /* MRXONB Low to High */ +#define WUP 0x8000 /* Wake-Up Preamble Received */ +#define FU2L 0x10000 /* Frame Unlock to Lock */ +#define FL2U 0x20000 /* Frame Lock to Unlock */ +#define BU2L 0x40000 /* Block Unlock to Lock */ +#define BL2U 0x80000 /* Block Lock to Unlock */ +#define OBERR 0x100000 /* DMA Out of Bounds Error */ +#define PFL 0x200000 /* PLL Frequency Locked */ +#define SCZ 0x400000 /* System Clock Counter Zero */ +#define FERR 0x800000 /* FIFO Error */ +#define CMR 0x1000000 /* Control Message Received */ +#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */ +#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */ +#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */ +#define RWRC 0x10000000 /* Remote Write Control Message Completed */ +#define BCZ 0x20000000 /* Block Counter Zero */ +#define BMERR 0x40000000 /* Biphase Mark Coding Error */ +#define DERR 0x80000000 /* DMA Error */ + +/* Bit masks for MXVR_INT_STAT_1 */ + +#define HDONE0 0x1 /* DMA0 Half Done */ +#define DONE0 0x2 /* DMA0 Done */ +#define APR 0x4 /* Asynchronous Packet Received */ +#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */ +#define HDONE1 0x10 /* DMA1 Half Done */ +#define DONE1 0x20 /* DMA1 Done */ +#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */ +#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */ +#define HDONE2 0x100 /* DMA2 Half Done */ +#define DONE2 0x200 /* DMA2 Done */ +#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */ +#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */ +#define HDONE3 0x1000 /* DMA3 Half Done */ +#define DONE3 0x2000 /* DMA3 Done */ +#define HDONE4 0x10000 /* DMA4 Half Done */ +#define DONE4 0x20000 /* DMA4 Done */ +#define HDONE5 0x100000 /* DMA5 Half Done */ +#define DONE5 0x200000 /* DMA5 Done */ +#define HDONE6 0x1000000 /* DMA6 Half Done */ +#define DONE6 0x2000000 /* DMA6 Done */ +#define HDONE7 0x10000000 /* DMA7 Half Done */ +#define DONE7 0x20000000 /* DMA7 Done */ + +/* Bit masks for MXVR_INT_EN_0 */ + +#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */ +#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */ +#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */ +#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */ +#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */ +#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */ +#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */ +#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */ +#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */ +#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */ +#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */ +#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */ +#define PERREN 0x1000 /* Parity Error Interrupt Enable */ +#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */ +#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */ +#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */ +#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */ +#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */ +#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */ +#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */ +#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */ +#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */ +#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */ +#define FERREN 0x800000 /* FIFO Error Interrupt Enable */ +#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */ +#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */ +#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */ +#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */ +#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */ +#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */ +#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */ +#define DERREN 0x80000000 /* DMA Error Interrupt Enable */ + +/* Bit masks for MXVR_INT_EN_1 */ + +#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */ +#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */ +#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */ +#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */ +#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */ +#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */ +#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */ +#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */ +#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */ +#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */ +#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */ +#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */ +#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */ +#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */ +#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */ +#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */ +#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */ +#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */ +#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */ +#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */ +#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */ +#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */ + +/* Bit masks for MXVR_POSITION */ + +#define POSITION 0x3f /* Node Position */ +#define PVALID 0x8000 /* Node Position Valid */ + +/* Bit masks for MXVR_MAX_POSITION */ + +#define MPOSITION 0x3f /* Maximum Node Position */ +#define MPVALID 0x8000 /* Maximum Node Position Valid */ + +/* Bit masks for MXVR_DELAY */ + +#define DELAY 0x3f /* Node Frame Delay */ +#define DVALID 0x8000 /* Node Frame Delay Valid */ + +/* Bit masks for MXVR_MAX_DELAY */ + +#define MDELAY 0x3f /* Maximum Node Frame Delay */ +#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */ + +/* Bit masks for MXVR_LADDR */ + +#define LADDR 0xffff /* Logical Address */ +#define LVALID 0x80000000 /* Logical Address Valid */ + +/* Bit masks for MXVR_GADDR */ + +#define GADDRL 0xff /* Group Address Lower Byte */ +#define GVALID 0x8000 /* Group Address Valid */ + +/* Bit masks for MXVR_AADDR */ + +#define AADDR 0xffff /* Alternate Address */ +#define AVALID 0x80000000 /* Alternate Address Valid */ + +/* Bit masks for MXVR_ALLOC_0 */ + +#define CL0 0x7f /* Channel 0 Connection Label */ +#define CIU0 0x80 /* Channel 0 In Use */ +#define CL1 0x7f00 /* Channel 0 Connection Label */ +#define CIU1 0x8000 /* Channel 0 In Use */ +#define CL2 0x7f0000 /* Channel 0 Connection Label */ +#define CIU2 0x800000 /* Channel 0 In Use */ +#define CL3 0x7f000000 /* Channel 0 Connection Label */ +#define CIU3 0x80000000 /* Channel 0 In Use */ + +/* Bit masks for MXVR_ALLOC_1 */ + +#define CL4 0x7f /* Channel 4 Connection Label */ +#define CIU4 0x80 /* Channel 4 In Use */ +#define CL5 0x7f00 /* Channel 5 Connection Label */ +#define CIU5 0x8000 /* Channel 5 In Use */ +#define CL6 0x7f0000 /* Channel 6 Connection Label */ +#define CIU6 0x800000 /* Channel 6 In Use */ +#define CL7 0x7f000000 /* Channel 7 Connection Label */ +#define CIU7 0x80000000 /* Channel 7 In Use */ + +/* Bit masks for MXVR_ALLOC_2 */ + +#define CL8 0x7f /* Channel 8 Connection Label */ +#define CIU8 0x80 /* Channel 8 In Use */ +#define CL9 0x7f00 /* Channel 9 Connection Label */ +#define CIU9 0x8000 /* Channel 9 In Use */ +#define CL10 0x7f0000 /* Channel 10 Connection Label */ +#define CIU10 0x800000 /* Channel 10 In Use */ +#define CL11 0x7f000000 /* Channel 11 Connection Label */ +#define CIU11 0x80000000 /* Channel 11 In Use */ + +/* Bit masks for MXVR_ALLOC_3 */ + +#define CL12 0x7f /* Channel 12 Connection Label */ +#define CIU12 0x80 /* Channel 12 In Use */ +#define CL13 0x7f00 /* Channel 13 Connection Label */ +#define CIU13 0x8000 /* Channel 13 In Use */ +#define CL14 0x7f0000 /* Channel 14 Connection Label */ +#define CIU14 0x800000 /* Channel 14 In Use */ +#define CL15 0x7f000000 /* Channel 15 Connection Label */ +#define CIU15 0x80000000 /* Channel 15 In Use */ + +/* Bit masks for MXVR_ALLOC_4 */ + +#define CL16 0x7f /* Channel 16 Connection Label */ +#define CIU16 0x80 /* Channel 16 In Use */ +#define CL17 0x7f00 /* Channel 17 Connection Label */ +#define CIU17 0x8000 /* Channel 17 In Use */ +#define CL18 0x7f0000 /* Channel 18 Connection Label */ +#define CIU18 0x800000 /* Channel 18 In Use */ +#define CL19 0x7f000000 /* Channel 19 Connection Label */ +#define CIU19 0x80000000 /* Channel 19 In Use */ + +/* Bit masks for MXVR_ALLOC_5 */ + +#define CL20 0x7f /* Channel 20 Connection Label */ +#define CIU20 0x80 /* Channel 20 In Use */ +#define CL21 0x7f00 /* Channel 21 Connection Label */ +#define CIU21 0x8000 /* Channel 21 In Use */ +#define CL22 0x7f0000 /* Channel 22 Connection Label */ +#define CIU22 0x800000 /* Channel 22 In Use */ +#define CL23 0x7f000000 /* Channel 23 Connection Label */ +#define CIU23 0x80000000 /* Channel 23 In Use */ + +/* Bit masks for MXVR_ALLOC_6 */ + +#define CL24 0x7f /* Channel 24 Connection Label */ +#define CIU24 0x80 /* Channel 24 In Use */ +#define CL25 0x7f00 /* Channel 25 Connection Label */ +#define CIU25 0x8000 /* Channel 25 In Use */ +#define CL26 0x7f0000 /* Channel 26 Connection Label */ +#define CIU26 0x800000 /* Channel 26 In Use */ +#define CL27 0x7f000000 /* Channel 27 Connection Label */ +#define CIU27 0x80000000 /* Channel 27 In Use */ + +/* Bit masks for MXVR_ALLOC_7 */ + +#define CL28 0x7f /* Channel 28 Connection Label */ +#define CIU28 0x80 /* Channel 28 In Use */ +#define CL29 0x7f00 /* Channel 29 Connection Label */ +#define CIU29 0x8000 /* Channel 29 In Use */ +#define CL30 0x7f0000 /* Channel 30 Connection Label */ +#define CIU30 0x800000 /* Channel 30 In Use */ +#define CL31 0x7f000000 /* Channel 31 Connection Label */ +#define CIU31 0x80000000 /* Channel 31 In Use */ + +/* Bit masks for MXVR_ALLOC_8 */ + +#define CL32 0x7f /* Channel 32 Connection Label */ +#define CIU32 0x80 /* Channel 32 In Use */ +#define CL33 0x7f00 /* Channel 33 Connection Label */ +#define CIU33 0x8000 /* Channel 33 In Use */ +#define CL34 0x7f0000 /* Channel 34 Connection Label */ +#define CIU34 0x800000 /* Channel 34 In Use */ +#define CL35 0x7f000000 /* Channel 35 Connection Label */ +#define CIU35 0x80000000 /* Channel 35 In Use */ + +/* Bit masks for MXVR_ALLOC_9 */ + +#define CL36 0x7f /* Channel 36 Connection Label */ +#define CIU36 0x80 /* Channel 36 In Use */ +#define CL37 0x7f00 /* Channel 37 Connection Label */ +#define CIU37 0x8000 /* Channel 37 In Use */ +#define CL38 0x7f0000 /* Channel 38 Connection Label */ +#define CIU38 0x800000 /* Channel 38 In Use */ +#define CL39 0x7f000000 /* Channel 39 Connection Label */ +#define CIU39 0x80000000 /* Channel 39 In Use */ + +/* Bit masks for MXVR_ALLOC_10 */ + +#define CL40 0x7f /* Channel 40 Connection Label */ +#define CIU40 0x80 /* Channel 40 In Use */ +#define CL41 0x7f00 /* Channel 41 Connection Label */ +#define CIU41 0x8000 /* Channel 41 In Use */ +#define CL42 0x7f0000 /* Channel 42 Connection Label */ +#define CIU42 0x800000 /* Channel 42 In Use */ +#define CL43 0x7f000000 /* Channel 43 Connection Label */ +#define CIU43 0x80000000 /* Channel 43 In Use */ + +/* Bit masks for MXVR_ALLOC_11 */ + +#define CL44 0x7f /* Channel 44 Connection Label */ +#define CIU44 0x80 /* Channel 44 In Use */ +#define CL45 0x7f00 /* Channel 45 Connection Label */ +#define CIU45 0x8000 /* Channel 45 In Use */ +#define CL46 0x7f0000 /* Channel 46 Connection Label */ +#define CIU46 0x800000 /* Channel 46 In Use */ +#define CL47 0x7f000000 /* Channel 47 Connection Label */ +#define CIU47 0x80000000 /* Channel 47 In Use */ + +/* Bit masks for MXVR_ALLOC_12 */ + +#define CL48 0x7f /* Channel 48 Connection Label */ +#define CIU48 0x80 /* Channel 48 In Use */ +#define CL49 0x7f00 /* Channel 49 Connection Label */ +#define CIU49 0x8000 /* Channel 49 In Use */ +#define CL50 0x7f0000 /* Channel 50 Connection Label */ +#define CIU50 0x800000 /* Channel 50 In Use */ +#define CL51 0x7f000000 /* Channel 51 Connection Label */ +#define CIU51 0x80000000 /* Channel 51 In Use */ + +/* Bit masks for MXVR_ALLOC_13 */ + +#define CL52 0x7f /* Channel 52 Connection Label */ +#define CIU52 0x80 /* Channel 52 In Use */ +#define CL53 0x7f00 /* Channel 53 Connection Label */ +#define CIU53 0x8000 /* Channel 53 In Use */ +#define CL54 0x7f0000 /* Channel 54 Connection Label */ +#define CIU54 0x800000 /* Channel 54 In Use */ +#define CL55 0x7f000000 /* Channel 55 Connection Label */ +#define CIU55 0x80000000 /* Channel 55 In Use */ + +/* Bit masks for MXVR_ALLOC_14 */ + +#define CL56 0x7f /* Channel 56 Connection Label */ +#define CIU56 0x80 /* Channel 56 In Use */ +#define CL57 0x7f00 /* Channel 57 Connection Label */ +#define CIU57 0x8000 /* Channel 57 In Use */ +#define CL58 0x7f0000 /* Channel 58 Connection Label */ +#define CIU58 0x800000 /* Channel 58 In Use */ +#define CL59 0x7f000000 /* Channel 59 Connection Label */ +#define CIU59 0x80000000 /* Channel 59 In Use */ + +/* MXVR_SYNC_LCHAN_0 Masks */ + +#define LCHANPC0 0x0000000Flu +#define LCHANPC1 0x000000F0lu +#define LCHANPC2 0x00000F00lu +#define LCHANPC3 0x0000F000lu +#define LCHANPC4 0x000F0000lu +#define LCHANPC5 0x00F00000lu +#define LCHANPC6 0x0F000000lu +#define LCHANPC7 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_1 Masks */ + +#define LCHANPC8 0x0000000Flu +#define LCHANPC9 0x000000F0lu +#define LCHANPC10 0x00000F00lu +#define LCHANPC11 0x0000F000lu +#define LCHANPC12 0x000F0000lu +#define LCHANPC13 0x00F00000lu +#define LCHANPC14 0x0F000000lu +#define LCHANPC15 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_2 Masks */ + +#define LCHANPC16 0x0000000Flu +#define LCHANPC17 0x000000F0lu +#define LCHANPC18 0x00000F00lu +#define LCHANPC19 0x0000F000lu +#define LCHANPC20 0x000F0000lu +#define LCHANPC21 0x00F00000lu +#define LCHANPC22 0x0F000000lu +#define LCHANPC23 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_3 Masks */ + +#define LCHANPC24 0x0000000Flu +#define LCHANPC25 0x000000F0lu +#define LCHANPC26 0x00000F00lu +#define LCHANPC27 0x0000F000lu +#define LCHANPC28 0x000F0000lu +#define LCHANPC29 0x00F00000lu +#define LCHANPC30 0x0F000000lu +#define LCHANPC31 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_4 Masks */ + +#define LCHANPC32 0x0000000Flu +#define LCHANPC33 0x000000F0lu +#define LCHANPC34 0x00000F00lu +#define LCHANPC35 0x0000F000lu +#define LCHANPC36 0x000F0000lu +#define LCHANPC37 0x00F00000lu +#define LCHANPC38 0x0F000000lu +#define LCHANPC39 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_5 Masks */ + +#define LCHANPC40 0x0000000Flu +#define LCHANPC41 0x000000F0lu +#define LCHANPC42 0x00000F00lu +#define LCHANPC43 0x0000F000lu +#define LCHANPC44 0x000F0000lu +#define LCHANPC45 0x00F00000lu +#define LCHANPC46 0x0F000000lu +#define LCHANPC47 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_6 Masks */ + +#define LCHANPC48 0x0000000Flu +#define LCHANPC49 0x000000F0lu +#define LCHANPC50 0x00000F00lu +#define LCHANPC51 0x0000F000lu +#define LCHANPC52 0x000F0000lu +#define LCHANPC53 0x00F00000lu +#define LCHANPC54 0x0F000000lu +#define LCHANPC55 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_7 Masks */ + +#define LCHANPC56 0x0000000Flu +#define LCHANPC57 0x000000F0lu +#define LCHANPC58 0x00000F00lu +#define LCHANPC59 0x0000F000lu + +/* Bit masks for MXVR_DMAx_CONFIG */ + +#define MDMAEN 0x1 /* DMA Channel Enable */ +#define DMADD 0x2 /* DMA Channel Direction */ +#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ +#define LCHAN 0x3c0 /* DMA Channel Logical Channel */ +#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ +#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */ +#define MFLOW 0x7000 /* DMA Channel Operation Flow */ +#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */ +#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */ +#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */ +#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */ + +/* Bit masks for MXVR_AP_CTL */ + +#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */ +#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */ +#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */ +#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */ +#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */ + +/* Bit masks for MXVR_APRB_START_ADDR */ + +#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ + +/* Bit masks for MXVR_APRB_CURR_ADDR */ + +#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ + +/* Bit masks for MXVR_APTB_START_ADDR */ + +#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ + +/* Bit masks for MXVR_APTB_CURR_ADDR */ + +#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ + +/* Bit masks for MXVR_CM_CTL */ + +#define STARTCM 0x1 /* Start Control Message Transmission */ +#define CANCELCM 0x2 /* Cancel Control Message Transmission */ +#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */ +#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */ +#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */ +#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */ +#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */ +#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */ +#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */ +#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */ +#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */ +#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */ +#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */ +#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */ +#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */ +#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */ +#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */ +#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */ + +/* Bit masks for MXVR_CMRB_START_ADDR */ + +#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */ + +/* Bit masks for MXVR_CMRB_CURR_ADDR */ + +#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */ + +/* Bit masks for MXVR_CMTB_START_ADDR */ + +#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */ + +/* Bit masks for MXVR_CMTB_CURR_ADDR */ + +#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */ + +/* Bit masks for MXVR_RRDB_START_ADDR */ + +#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */ + +/* Bit masks for MXVR_RRDB_CURR_ADDR */ + +#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */ + +/* Bit masks for MXVR_PAT_DATAx */ + +#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */ +#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */ +#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */ +#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */ + +/* Bit masks for MXVR_PAT_EN_0 */ + +#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ +#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ +#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ +#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ +#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ +#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ +#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ +#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ +#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ +#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ +#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ +#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ +#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ +#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ +#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ +#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ +#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ +#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ +#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ +#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ +#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ +#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ +#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ +#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ +#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ +#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ +#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ +#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ +#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ +#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ +#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ +#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ + +/* Bit masks for MXVR_PAT_EN_1 */ + +#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ +#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ +#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ +#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ +#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ +#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ +#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ +#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ +#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ +#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ +#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ +#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ +#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ +#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ +#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ +#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ +#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ +#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ +#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ +#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ +#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ +#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ +#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ +#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ +#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ +#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ +#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ +#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ +#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ +#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ +#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ +#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ + +/* Bit masks for MXVR_FRAME_CNT_0 */ + +#define FCNT 0xffff /* Frame Count */ + +/* Bit masks for MXVR_FRAME_CNT_1 */ + +#define FCNT 0xffff /* Frame Count */ + +/* Bit masks for MXVR_ROUTING_0 */ + +#define TX_CH0 0x3f /* Transmit Channel 0 */ +#define MUTE_CH0 0x80 /* Mute Channel 0 */ +#define TX_CH1 0x3f00 /* Transmit Channel 0 */ +#define MUTE_CH1 0x8000 /* Mute Channel 0 */ +#define TX_CH2 0x3f0000 /* Transmit Channel 0 */ +#define MUTE_CH2 0x800000 /* Mute Channel 0 */ +#define TX_CH3 0x3f000000 /* Transmit Channel 0 */ +#define MUTE_CH3 0x80000000 /* Mute Channel 0 */ + +/* Bit masks for MXVR_ROUTING_1 */ + +#define TX_CH4 0x3f /* Transmit Channel 4 */ +#define MUTE_CH4 0x80 /* Mute Channel 4 */ +#define TX_CH5 0x3f00 /* Transmit Channel 5 */ +#define MUTE_CH5 0x8000 /* Mute Channel 5 */ +#define TX_CH6 0x3f0000 /* Transmit Channel 6 */ +#define MUTE_CH6 0x800000 /* Mute Channel 6 */ +#define TX_CH7 0x3f000000 /* Transmit Channel 7 */ +#define MUTE_CH7 0x80000000 /* Mute Channel 7 */ + +/* Bit masks for MXVR_ROUTING_2 */ + +#define TX_CH8 0x3f /* Transmit Channel 8 */ +#define MUTE_CH8 0x80 /* Mute Channel 8 */ +#define TX_CH9 0x3f00 /* Transmit Channel 9 */ +#define MUTE_CH9 0x8000 /* Mute Channel 9 */ +#define TX_CH10 0x3f0000 /* Transmit Channel 10 */ +#define MUTE_CH10 0x800000 /* Mute Channel 10 */ +#define TX_CH11 0x3f000000 /* Transmit Channel 11 */ +#define MUTE_CH11 0x80000000 /* Mute Channel 11 */ + +/* Bit masks for MXVR_ROUTING_3 */ + +#define TX_CH12 0x3f /* Transmit Channel 12 */ +#define MUTE_CH12 0x80 /* Mute Channel 12 */ +#define TX_CH13 0x3f00 /* Transmit Channel 13 */ +#define MUTE_CH13 0x8000 /* Mute Channel 13 */ +#define TX_CH14 0x3f0000 /* Transmit Channel 14 */ +#define MUTE_CH14 0x800000 /* Mute Channel 14 */ +#define TX_CH15 0x3f000000 /* Transmit Channel 15 */ +#define MUTE_CH15 0x80000000 /* Mute Channel 15 */ + +/* Bit masks for MXVR_ROUTING_4 */ + +#define TX_CH16 0x3f /* Transmit Channel 16 */ +#define MUTE_CH16 0x80 /* Mute Channel 16 */ +#define TX_CH17 0x3f00 /* Transmit Channel 17 */ +#define MUTE_CH17 0x8000 /* Mute Channel 17 */ +#define TX_CH18 0x3f0000 /* Transmit Channel 18 */ +#define MUTE_CH18 0x800000 /* Mute Channel 18 */ +#define TX_CH19 0x3f000000 /* Transmit Channel 19 */ +#define MUTE_CH19 0x80000000 /* Mute Channel 19 */ + +/* Bit masks for MXVR_ROUTING_5 */ + +#define TX_CH20 0x3f /* Transmit Channel 20 */ +#define MUTE_CH20 0x80 /* Mute Channel 20 */ +#define TX_CH21 0x3f00 /* Transmit Channel 21 */ +#define MUTE_CH21 0x8000 /* Mute Channel 21 */ +#define TX_CH22 0x3f0000 /* Transmit Channel 22 */ +#define MUTE_CH22 0x800000 /* Mute Channel 22 */ +#define TX_CH23 0x3f000000 /* Transmit Channel 23 */ +#define MUTE_CH23 0x80000000 /* Mute Channel 23 */ + +/* Bit masks for MXVR_ROUTING_6 */ + +#define TX_CH24 0x3f /* Transmit Channel 24 */ +#define MUTE_CH24 0x80 /* Mute Channel 24 */ +#define TX_CH25 0x3f00 /* Transmit Channel 25 */ +#define MUTE_CH25 0x8000 /* Mute Channel 25 */ +#define TX_CH26 0x3f0000 /* Transmit Channel 26 */ +#define MUTE_CH26 0x800000 /* Mute Channel 26 */ +#define TX_CH27 0x3f000000 /* Transmit Channel 27 */ +#define MUTE_CH27 0x80000000 /* Mute Channel 27 */ + +/* Bit masks for MXVR_ROUTING_7 */ + +#define TX_CH28 0x3f /* Transmit Channel 28 */ +#define MUTE_CH28 0x80 /* Mute Channel 28 */ +#define TX_CH29 0x3f00 /* Transmit Channel 29 */ +#define MUTE_CH29 0x8000 /* Mute Channel 29 */ +#define TX_CH30 0x3f0000 /* Transmit Channel 30 */ +#define MUTE_CH30 0x800000 /* Mute Channel 30 */ +#define TX_CH31 0x3f000000 /* Transmit Channel 31 */ +#define MUTE_CH31 0x80000000 /* Mute Channel 31 */ + +/* Bit masks for MXVR_ROUTING_8 */ + +#define TX_CH32 0x3f /* Transmit Channel 32 */ +#define MUTE_CH32 0x80 /* Mute Channel 32 */ +#define TX_CH33 0x3f00 /* Transmit Channel 33 */ +#define MUTE_CH33 0x8000 /* Mute Channel 33 */ +#define TX_CH34 0x3f0000 /* Transmit Channel 34 */ +#define MUTE_CH34 0x800000 /* Mute Channel 34 */ +#define TX_CH35 0x3f000000 /* Transmit Channel 35 */ +#define MUTE_CH35 0x80000000 /* Mute Channel 35 */ + +/* Bit masks for MXVR_ROUTING_9 */ + +#define TX_CH36 0x3f /* Transmit Channel 36 */ +#define MUTE_CH36 0x80 /* Mute Channel 36 */ +#define TX_CH37 0x3f00 /* Transmit Channel 37 */ +#define MUTE_CH37 0x8000 /* Mute Channel 37 */ +#define TX_CH38 0x3f0000 /* Transmit Channel 38 */ +#define MUTE_CH38 0x800000 /* Mute Channel 38 */ +#define TX_CH39 0x3f000000 /* Transmit Channel 39 */ +#define MUTE_CH39 0x80000000 /* Mute Channel 39 */ + +/* Bit masks for MXVR_ROUTING_10 */ + +#define TX_CH40 0x3f /* Transmit Channel 40 */ +#define MUTE_CH40 0x80 /* Mute Channel 40 */ +#define TX_CH41 0x3f00 /* Transmit Channel 41 */ +#define MUTE_CH41 0x8000 /* Mute Channel 41 */ +#define TX_CH42 0x3f0000 /* Transmit Channel 42 */ +#define MUTE_CH42 0x800000 /* Mute Channel 42 */ +#define TX_CH43 0x3f000000 /* Transmit Channel 43 */ +#define MUTE_CH43 0x80000000 /* Mute Channel 43 */ + +/* Bit masks for MXVR_ROUTING_11 */ + +#define TX_CH44 0x3f /* Transmit Channel 44 */ +#define MUTE_CH44 0x80 /* Mute Channel 44 */ +#define TX_CH45 0x3f00 /* Transmit Channel 45 */ +#define MUTE_CH45 0x8000 /* Mute Channel 45 */ +#define TX_CH46 0x3f0000 /* Transmit Channel 46 */ +#define MUTE_CH46 0x800000 /* Mute Channel 46 */ +#define TX_CH47 0x3f000000 /* Transmit Channel 47 */ +#define MUTE_CH47 0x80000000 /* Mute Channel 47 */ + +/* Bit masks for MXVR_ROUTING_12 */ + +#define TX_CH48 0x3f /* Transmit Channel 48 */ +#define MUTE_CH48 0x80 /* Mute Channel 48 */ +#define TX_CH49 0x3f00 /* Transmit Channel 49 */ +#define MUTE_CH49 0x8000 /* Mute Channel 49 */ +#define TX_CH50 0x3f0000 /* Transmit Channel 50 */ +#define MUTE_CH50 0x800000 /* Mute Channel 50 */ +#define TX_CH51 0x3f000000 /* Transmit Channel 51 */ +#define MUTE_CH51 0x80000000 /* Mute Channel 51 */ + +/* Bit masks for MXVR_ROUTING_13 */ + +#define TX_CH52 0x3f /* Transmit Channel 52 */ +#define MUTE_CH52 0x80 /* Mute Channel 52 */ +#define TX_CH53 0x3f00 /* Transmit Channel 53 */ +#define MUTE_CH53 0x8000 /* Mute Channel 53 */ +#define TX_CH54 0x3f0000 /* Transmit Channel 54 */ +#define MUTE_CH54 0x800000 /* Mute Channel 54 */ +#define TX_CH55 0x3f000000 /* Transmit Channel 55 */ +#define MUTE_CH55 0x80000000 /* Mute Channel 55 */ + +/* Bit masks for MXVR_ROUTING_14 */ + +#define TX_CH56 0x3f /* Transmit Channel 56 */ +#define MUTE_CH56 0x80 /* Mute Channel 56 */ +#define TX_CH57 0x3f00 /* Transmit Channel 57 */ +#define MUTE_CH57 0x8000 /* Mute Channel 57 */ +#define TX_CH58 0x3f0000 /* Transmit Channel 58 */ +#define MUTE_CH58 0x800000 /* Mute Channel 58 */ +#define TX_CH59 0x3f000000 /* Transmit Channel 59 */ +#define MUTE_CH59 0x80000000 /* Mute Channel 59 */ + +/* Bit masks for MXVR_BLOCK_CNT */ + +#define BCNT 0xffff /* Block Count */ + +/* Bit masks for MXVR_CLK_CTL */ + +#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */ +#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */ +#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */ +#define CLKX3SEL 0x80 /* Clock Generation Source Select */ +#define MMCLKEN 0x100 /* Master Clock Enable */ +#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */ +#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */ +#define MBCLKEN 0x10000 /* Bit Clock Enable */ +#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */ +#define INVRX 0x800000 /* Invert Receive Data */ +#define MFSEN 0x1000000 /* Frame Sync Enable */ +#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */ +#define MFSSEL 0x60000000 /* Frame Sync Select */ +#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */ + +/* Bit masks for MXVR_CDRPLL_CTL */ + +#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */ +#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */ +#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */ +#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */ +#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */ +#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */ +#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */ +#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */ +#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */ + +/* Bit masks for MXVR_FMPLL_CTL */ + +#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */ +#define FMRSTB 0x2 /* MXVR FMPLL Reset */ +#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */ +#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */ +#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */ +#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */ + +/* Bit masks for MXVR_PIN_CTL */ + +#define MTXONBOD 0x1 /* MTXONB Open Drain Select */ +#define MTXONBG 0x2 /* MTXONB Gates MTX Select */ +#define MFSOE 0x10 /* MFS Output Enable */ +#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */ +#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */ + +/* Bit masks for MXVR_SCLK_CNT */ + +#define SCNT 0xffff /* System Clock Count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define CMD_L_RSP 0x80 /* Long Response */ +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define CMD_PEND_E 0x200 /* Command Pending */ +#define CMD_E 0x400 /* Command Enable */ + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define ROD_CTL 0x80 /* Rod Control */ + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define CMD_SENT 0x80 /* CMD Sent */ +#define DAT_END 0x100 /* Data End */ +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define DAT_BLK_END 0x400 /* Data Block End */ +#define CMD_ACT 0x800 /* CMD Active */ +#define TX_ACT 0x1000 /* Transmit Active */ +#define RX_ACT 0x2000 /* Receive Active */ +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define DAT_END_STAT 0x100 /* Data End Status */ +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define SD_CARD_DET 0x10 /* SD Card Detect */ + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define SCD_MSK 0x40 /* Mask Card Detect */ + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define MWE 0x8 /* Moving Window Enable */ +#define SD_RST 0x10 /* SDMMC Reset */ +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define XFER_DIR 0x8 /* Transfer Direction */ +#define IORDY_EN 0x10 /* IORDY Enable */ +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define SOFT_RST 0x40 /* Soft Reset */ +#define DEV_RST 0x80 /* Device Reset */ +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define TIMEN10 0x4 /* Timer 10 Enable */ + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define TIMDIS10 0x4 /* Timer 10 Disable */ + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define RESUME_MODE 0x4 /* DMA Mode */ +#define RESET 0x8 /* Reset indicator */ +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define SOFT_CONN 0x40 /* Soft connect */ +#define ISO_UPDATE 0x80 /* Isochronous update */ + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define RESUME_B 0x2 /* Resume indicator */ +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define SOF_B 0x8 /* Start of frame */ +#define CONN_B 0x10 /* Connection indicator */ +#define DISCON_B 0x20 /* Disconnect indicator */ +#define SESSION_REQ_B 0x40 /* Session Request */ +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define SOF_BE 0x8 /* Start of frame int enable */ +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define HOST_REQ 0x2 /* Host negotiation request */ +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define LSDEV 0x20 /* Low-speed indicator */ +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define DATAEND 0x8 /* Data end indicator */ +#define SETUPEND 0x10 /* Setup end */ +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_TH 0x4 /* error condition host mode */ +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define MODE 0x4 /* DMA Bus error */ +#define INT_ENA 0x8 /* Interrupt enable */ +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define UTE 0x8 /* Urgency Threshold Enable */ +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define PS 0x2000 /* Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +/* ************************ */ +/* MXVR Address Offsets */ +/* ************************ */ + +/* Control Message Receive Buffer (CMRB) Address Offsets */ + +#define CMRB_STRIDE 0x00000016lu + +#define CMRB_DST_OFFSET 0x00000000lu +#define CMRB_SRC_OFFSET 0x00000002lu +#define CMRB_DATA_OFFSET 0x00000005lu + +/* Control Message Transmit Buffer (CMTB) Address Offsets */ + +#define CMTB_PRIO_OFFSET 0x00000000lu +#define CMTB_DST_OFFSET 0x00000002lu +#define CMTB_SRC_OFFSET 0x00000004lu +#define CMTB_TYPE_OFFSET 0x00000006lu +#define CMTB_DATA_OFFSET 0x00000007lu + +#define CMTB_ANSWER_OFFSET 0x0000000Alu + +#define CMTB_STAT_N_OFFSET 0x00000018lu +#define CMTB_STAT_A_OFFSET 0x00000016lu +#define CMTB_STAT_D_OFFSET 0x0000000Elu +#define CMTB_STAT_R_OFFSET 0x00000014lu +#define CMTB_STAT_W_OFFSET 0x00000014lu +#define CMTB_STAT_G_OFFSET 0x00000014lu + +/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ + +#define APRB_STRIDE 0x00000400lu + +#define APRB_DST_OFFSET 0x00000000lu +#define APRB_LEN_OFFSET 0x00000002lu +#define APRB_SRC_OFFSET 0x00000004lu +#define APRB_DATA_OFFSET 0x00000006lu + +/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ + +#define APTB_PRIO_OFFSET 0x00000000lu +#define APTB_DST_OFFSET 0x00000002lu +#define APTB_LEN_OFFSET 0x00000004lu +#define APTB_SRC_OFFSET 0x00000006lu +#define APTB_DATA_OFFSET 0x00000008lu + +/* Remote Read Buffer (RRDB) Address Offsets */ + +#define RRDB_WADDR_OFFSET 0x00000100lu +#define RRDB_WLEN_OFFSET 0x00000101lu + +/* **************** */ +/* MXVR Macros */ +/* **************** */ + +/* MXVR_CONFIG Macros */ + +#define SET_MSB(x) ( ( (x) & 0xF ) << 9) + +/* MXVR_INT_STAT_1 Macros */ + +#define DONEX(x) (0x00000002 << (4 * (x))) +#define HDONEX(x) (0x00000001 << (4 * (x))) + +/* MXVR_INT_EN_1 Macros */ + +#define DONEENX(x) (0x00000002 << (4 * (x))) +#define HDONEENX(x) (0x00000001 << (4 * (x))) + +/* MXVR_CDRPLL_CTL Macros */ + +#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16) + +/* MXVR_FMPLL_CTL Macros */ + +#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24) +#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24) + +#endif /* _DEF_BF549_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h new file mode 100644 index 00000000000..e022e896cb1 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -0,0 +1,3956 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF54x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF54X_H +#define _DEF_BF54X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ +/* ************************************************************** */ + +/* PLL Registers */ + +#define PLL_CTL 0xffc00000 /* PLL Control Register */ +#define PLL_DIV 0xffc00004 /* PLL Divisor Register */ +#define VR_CTL 0xffc00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xffc0000c /* PLL Status Register */ +#define PLL_LOCKCNT 0xffc00010 /* PLL Lock Count Register */ + +/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ + +#define CHIPID 0xffc00014 +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */ + +#define SWRST 0xffc00100 /* Software Reset Register */ +#define SYSCR 0xffc00104 /* System Configuration register */ + +/* SIC Registers */ + +#define SIC_IMASK0 0xffc0010c /* System Interrupt Mask Register 0 */ +#define SIC_IMASK1 0xffc00110 /* System Interrupt Mask Register 1 */ +#define SIC_IMASK2 0xffc00114 /* System Interrupt Mask Register 2 */ +#define SIC_ISR0 0xffc00118 /* System Interrupt Status Register 0 */ +#define SIC_ISR1 0xffc0011c /* System Interrupt Status Register 1 */ +#define SIC_ISR2 0xffc00120 /* System Interrupt Status Register 2 */ +#define SIC_IWR0 0xffc00124 /* System Interrupt Wakeup Register 0 */ +#define SIC_IWR1 0xffc00128 /* System Interrupt Wakeup Register 1 */ +#define SIC_IWR2 0xffc0012c /* System Interrupt Wakeup Register 2 */ +#define SIC_IAR0 0xffc00130 /* System Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xffc00134 /* System Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xffc00138 /* System Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xffc0013c /* System Interrupt Assignment Register 3 */ +#define SIC_IAR4 0xffc00140 /* System Interrupt Assignment Register 4 */ +#define SIC_IAR5 0xffc00144 /* System Interrupt Assignment Register 5 */ +#define SIC_IAR6 0xffc00148 /* System Interrupt Assignment Register 6 */ +#define SIC_IAR7 0xffc0014c /* System Interrupt Assignment Register 7 */ +#define SIC_IAR8 0xffc00150 /* System Interrupt Assignment Register 8 */ +#define SIC_IAR9 0xffc00154 /* System Interrupt Assignment Register 9 */ +#define SIC_IAR10 0xffc00158 /* System Interrupt Assignment Register 10 */ +#define SIC_IAR11 0xffc0015c /* System Interrupt Assignment Register 11 */ + +/* Watchdog Timer Registers */ + +#define WDOG_CTL 0xffc00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xffc00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xffc00208 /* Watchdog Status Register */ + +/* RTC Registers */ + +#define RTC_STAT 0xffc00300 /* RTC Status Register */ +#define RTC_ICTL 0xffc00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xffc00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xffc0030c /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xffc00310 /* RTC Alarm Register */ +#define RTC_PREN 0xffc00314 /* RTC Prescaler Enable Register */ + +/* UART0 Registers */ + +#define UART0_DLL 0xffc00400 /* Divisor Latch Low Byte */ +#define UART0_DLH 0xffc00404 /* Divisor Latch High Byte */ +#define UART0_GCTL 0xffc00408 /* Global Control Register */ +#define UART0_LCR 0xffc0040c /* Line Control Register */ +#define UART0_MCR 0xffc00410 /* Modem Control Register */ +#define UART0_LSR 0xffc00414 /* Line Status Register */ +#define UART0_MSR 0xffc00418 /* Modem Status Register */ +#define UART0_SCR 0xffc0041c /* Scratch Register */ +#define UART0_IER_SET 0xffc00420 /* Interrupt Enable Register Set */ +#define UART0_IER_CLEAR 0xffc00424 /* Interrupt Enable Register Clear */ +#define UART0_THR 0xffc00428 /* Transmit Hold Register */ +#define UART0_RBR 0xffc0042c /* Receive Buffer Register */ + +/* SPI0 Registers */ + +#define SPI0_REGBASE 0xffc00500 +#define SPI0_CTL 0xffc00500 /* SPI0 Control Register */ +#define SPI0_FLG 0xffc00504 /* SPI0 Flag Register */ +#define SPI0_STAT 0xffc00508 /* SPI0 Status Register */ +#define SPI0_TDBR 0xffc0050c /* SPI0 Transmit Data Buffer Register */ +#define SPI0_RDBR 0xffc00510 /* SPI0 Receive Data Buffer Register */ +#define SPI0_BAUD 0xffc00514 /* SPI0 Baud Rate Register */ +#define SPI0_SHADOW 0xffc00518 /* SPI0 Receive Data Buffer Shadow Register */ + +/* Timer Group of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */ + +/* Two Wire Interface Registers (TWI0) */ + +#define TWI0_REGBASE 0xffc00700 +#define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */ +#define TWI0_CONTROL 0xffc00704 /* TWI Control Register */ +#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xffc0070c /* TWI Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xffc00710 /* TWI Slave Mode Address Register */ +#define TWI0_MASTER_CTRL 0xffc00714 /* TWI Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xffc00718 /* TWI Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xffc0071c /* TWI Master Mode Address Register */ +#define TWI0_INT_STAT 0xffc00720 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xffc00724 /* TWI Interrupt Mask Register */ +#define TWI0_FIFO_CTRL 0xffc00728 /* TWI FIFO Control Register */ +#define TWI0_FIFO_STAT 0xffc0072c /* TWI FIFO Status Register */ +#define TWI0_XMT_DATA8 0xffc00780 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xffc00784 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xffc00788 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xffc0078c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */ + +/* SPORT1 Registers */ + +#define SPORT1_TCR1 0xffc00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xffc00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xffc00908 /* SPORT1 Transmit Serial Clock Divider Register */ +#define SPORT1_TFSDIV 0xffc0090c /* SPORT1 Transmit Frame Sync Divider Register */ +#define SPORT1_TX 0xffc00910 /* SPORT1 Transmit Data Register */ +#define SPORT1_RX 0xffc00918 /* SPORT1 Receive Data Register */ +#define SPORT1_RCR1 0xffc00920 /* SPORT1 Receive Configuration 1 Register */ +#define SPORT1_RCR2 0xffc00924 /* SPORT1 Receive Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xffc00928 /* SPORT1 Receive Serial Clock Divider Register */ +#define SPORT1_RFSDIV 0xffc0092c /* SPORT1 Receive Frame Sync Divider Register */ +#define SPORT1_STAT 0xffc00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xffc00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xffc00938 /* SPORT1 Multi channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xffc0093c /* SPORT1 Multi channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xffc00940 /* SPORT1 Multi channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xffc00944 /* SPORT1 Multi channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xffc00948 /* SPORT1 Multi channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xffc0094c /* SPORT1 Multi channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xffc00950 /* SPORT1 Multi channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xffc00954 /* SPORT1 Multi channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xffc00958 /* SPORT1 Multi channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xffc0095c /* SPORT1 Multi channel Receive Select Register 3 */ + +/* Asynchronous Memory Control Registers */ + +#define EBIU_AMGCTL 0xffc00a00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xffc00a04 /* Asynchronous Memory Bank Control Register */ +#define EBIU_AMBCTL1 0xffc00a08 /* Asynchronous Memory Bank Control Register */ +#define EBIU_MBSCTL 0xffc00a0c /* Asynchronous Memory Bank Select Control Register */ +#define EBIU_ARBSTAT 0xffc00a10 /* Asynchronous Memory Arbiter Status Register */ +#define EBIU_MODE 0xffc00a14 /* Asynchronous Mode Control Register */ +#define EBIU_FCTL 0xffc00a18 /* Asynchronous Memory Flash Control Register */ + +/* DDR Memory Control Registers */ + +#define EBIU_DDRCTL0 0xffc00a20 /* DDR Memory Control 0 Register */ +#define EBIU_DDRCTL1 0xffc00a24 /* DDR Memory Control 1 Register */ +#define EBIU_DDRCTL2 0xffc00a28 /* DDR Memory Control 2 Register */ +#define EBIU_DDRCTL3 0xffc00a2c /* DDR Memory Control 3 Register */ +#define EBIU_DDRQUE 0xffc00a30 /* DDR Queue Configuration Register */ +#define EBIU_ERRADD 0xffc00a34 /* DDR Error Address Register */ +#define EBIU_ERRMST 0xffc00a38 /* DDR Error Master Register */ +#define EBIU_RSTCTL 0xffc00a3c /* DDR Reset Control Register */ + +/* DDR BankRead and Write Count Registers */ + +#define EBIU_DDRBRC0 0xffc00a60 /* DDR Bank0 Read Count Register */ +#define EBIU_DDRBRC1 0xffc00a64 /* DDR Bank1 Read Count Register */ +#define EBIU_DDRBRC2 0xffc00a68 /* DDR Bank2 Read Count Register */ +#define EBIU_DDRBRC3 0xffc00a6c /* DDR Bank3 Read Count Register */ +#define EBIU_DDRBRC4 0xffc00a70 /* DDR Bank4 Read Count Register */ +#define EBIU_DDRBRC5 0xffc00a74 /* DDR Bank5 Read Count Register */ +#define EBIU_DDRBRC6 0xffc00a78 /* DDR Bank6 Read Count Register */ +#define EBIU_DDRBRC7 0xffc00a7c /* DDR Bank7 Read Count Register */ +#define EBIU_DDRBWC0 0xffc00a80 /* DDR Bank0 Write Count Register */ +#define EBIU_DDRBWC1 0xffc00a84 /* DDR Bank1 Write Count Register */ +#define EBIU_DDRBWC2 0xffc00a88 /* DDR Bank2 Write Count Register */ +#define EBIU_DDRBWC3 0xffc00a8c /* DDR Bank3 Write Count Register */ +#define EBIU_DDRBWC4 0xffc00a90 /* DDR Bank4 Write Count Register */ +#define EBIU_DDRBWC5 0xffc00a94 /* DDR Bank5 Write Count Register */ +#define EBIU_DDRBWC6 0xffc00a98 /* DDR Bank6 Write Count Register */ +#define EBIU_DDRBWC7 0xffc00a9c /* DDR Bank7 Write Count Register */ +#define EBIU_DDRACCT 0xffc00aa0 /* DDR Activation Count Register */ +#define EBIU_DDRTACT 0xffc00aa8 /* DDR Turn Around Count Register */ +#define EBIU_DDRARCT 0xffc00aac /* DDR Auto-refresh Count Register */ +#define EBIU_DDRGC0 0xffc00ab0 /* DDR Grant Count 0 Register */ +#define EBIU_DDRGC1 0xffc00ab4 /* DDR Grant Count 1 Register */ +#define EBIU_DDRGC2 0xffc00ab8 /* DDR Grant Count 2 Register */ +#define EBIU_DDRGC3 0xffc00abc /* DDR Grant Count 3 Register */ +#define EBIU_DDRMCEN 0xffc00ac0 /* DDR Metrics Counter Enable Register */ +#define EBIU_DDRMCCL 0xffc00ac4 /* DDR Metrics Counter Clear Register */ + +/* DMAC0 Registers */ + +#define DMAC0_TCPER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ +#define DMAC0_TCCNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ + +/* DMA Channel 0 Registers */ + +#define DMA0_NEXT_DESC_PTR 0xffc00c00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xffc00c04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xffc00c08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xffc00c10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xffc00c14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xffc00c18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xffc00c1c /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xffc00c20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xffc00c24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xffc00c28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xffc00c2c /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xffc00c30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xffc00c38 /* DMA Channel 0 Current Y Count Register */ + +/* DMA Channel 1 Registers */ + +#define DMA1_NEXT_DESC_PTR 0xffc00c40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xffc00c44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xffc00c48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xffc00c50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xffc00c54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xffc00c58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xffc00c5c /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xffc00c60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xffc00c64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xffc00c68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xffc00c6c /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xffc00c70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xffc00c78 /* DMA Channel 1 Current Y Count Register */ + +/* DMA Channel 2 Registers */ + +#define DMA2_NEXT_DESC_PTR 0xffc00c80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xffc00c84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xffc00c88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xffc00c90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xffc00c94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xffc00c98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xffc00c9c /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xffc00ca0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xffc00ca4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xffc00ca8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xffc00cac /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xffc00cb0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xffc00cb8 /* DMA Channel 2 Current Y Count Register */ + +/* DMA Channel 3 Registers */ + +#define DMA3_NEXT_DESC_PTR 0xffc00cc0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xffc00cc4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xffc00cc8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xffc00cd0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xffc00cd4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xffc00cd8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xffc00cdc /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xffc00ce0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xffc00ce4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xffc00ce8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xffc00cec /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xffc00cf0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xffc00cf8 /* DMA Channel 3 Current Y Count Register */ + +/* DMA Channel 4 Registers */ + +#define DMA4_NEXT_DESC_PTR 0xffc00d00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xffc00d04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xffc00d08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xffc00d10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xffc00d14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xffc00d18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xffc00d1c /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xffc00d20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xffc00d24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xffc00d28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xffc00d2c /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xffc00d30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xffc00d38 /* DMA Channel 4 Current Y Count Register */ + +/* DMA Channel 5 Registers */ + +#define DMA5_NEXT_DESC_PTR 0xffc00d40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xffc00d44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xffc00d48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xffc00d50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xffc00d54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xffc00d58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xffc00d5c /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xffc00d60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xffc00d64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xffc00d68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xffc00d6c /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xffc00d70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xffc00d78 /* DMA Channel 5 Current Y Count Register */ + +/* DMA Channel 6 Registers */ + +#define DMA6_NEXT_DESC_PTR 0xffc00d80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xffc00d84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xffc00d88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xffc00d90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xffc00d94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xffc00d98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xffc00d9c /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xffc00da0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xffc00da4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xffc00da8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xffc00dac /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xffc00db0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xffc00db8 /* DMA Channel 6 Current Y Count Register */ + +/* DMA Channel 7 Registers */ + +#define DMA7_NEXT_DESC_PTR 0xffc00dc0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xffc00dc4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xffc00dc8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xffc00dd0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xffc00dd4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xffc00dd8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xffc00ddc /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xffc00de0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xffc00de4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xffc00de8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xffc00dec /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xffc00df0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xffc00df8 /* DMA Channel 7 Current Y Count Register */ + +/* DMA Channel 8 Registers */ + +#define DMA8_NEXT_DESC_PTR 0xffc00e00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xffc00e04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xffc00e08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xffc00e10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xffc00e14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xffc00e18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xffc00e1c /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xffc00e20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xffc00e24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xffc00e28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xffc00e2c /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xffc00e30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xffc00e38 /* DMA Channel 8 Current Y Count Register */ + +/* DMA Channel 9 Registers */ + +#define DMA9_NEXT_DESC_PTR 0xffc00e40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xffc00e44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xffc00e48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xffc00e50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xffc00e54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xffc00e58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xffc00e5c /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xffc00e60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xffc00e64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xffc00e68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xffc00e6c /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xffc00e70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xffc00e78 /* DMA Channel 9 Current Y Count Register */ + +/* DMA Channel 10 Registers */ + +#define DMA10_NEXT_DESC_PTR 0xffc00e80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xffc00e84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xffc00e88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xffc00e90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xffc00e94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xffc00e98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xffc00e9c /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xffc00ea0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xffc00ea4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xffc00ea8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xffc00eac /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xffc00eb0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xffc00eb8 /* DMA Channel 10 Current Y Count Register */ + +/* DMA Channel 11 Registers */ + +#define DMA11_NEXT_DESC_PTR 0xffc00ec0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xffc00ec4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xffc00ec8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xffc00ed0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xffc00ed4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xffc00ed8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xffc00edc /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xffc00ee0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xffc00ee4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xffc00ee8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xffc00eec /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xffc00ef0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xffc00ef8 /* DMA Channel 11 Current Y Count Register */ + +/* MDMA Stream 0 Registers */ + +#define MDMA_D0_NEXT_DESC_PTR 0xffc00f00 /* Memory DMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xffc00f04 /* Memory DMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xffc00f08 /* Memory DMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xffc00f10 /* Memory DMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xffc00f14 /* Memory DMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xffc00f18 /* Memory DMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xffc00f1c /* Memory DMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xffc00f20 /* Memory DMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xffc00f24 /* Memory DMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xffc00f28 /* Memory DMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xffc00f2c /* Memory DMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xffc00f30 /* Memory DMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xffc00f38 /* Memory DMA Stream 0 Destination Current Y Count Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xffc00f40 /* Memory DMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xffc00f44 /* Memory DMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xffc00f48 /* Memory DMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xffc00f50 /* Memory DMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xffc00f54 /* Memory DMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xffc00f58 /* Memory DMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xffc00f5c /* Memory DMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xffc00f60 /* Memory DMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xffc00f64 /* Memory DMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xffc00f68 /* Memory DMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xffc00f6c /* Memory DMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xffc00f70 /* Memory DMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xffc00f78 /* Memory DMA Stream 0 Source Current Y Count Register */ + +/* MDMA Stream 1 Registers */ + +#define MDMA_D1_NEXT_DESC_PTR 0xffc00f80 /* Memory DMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xffc00f84 /* Memory DMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xffc00f88 /* Memory DMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xffc00f90 /* Memory DMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xffc00f94 /* Memory DMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xffc00f98 /* Memory DMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xffc00f9c /* Memory DMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xffc00fa0 /* Memory DMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xffc00fa4 /* Memory DMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xffc00fa8 /* Memory DMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xffc00fac /* Memory DMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xffc00fb0 /* Memory DMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xffc00fb8 /* Memory DMA Stream 1 Destination Current Y Count Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xffc00fc0 /* Memory DMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xffc00fc4 /* Memory DMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xffc00fc8 /* Memory DMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xffc00fd0 /* Memory DMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xffc00fd4 /* Memory DMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xffc00fd8 /* Memory DMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xffc00fdc /* Memory DMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xffc00fe0 /* Memory DMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xffc00fe4 /* Memory DMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xffc00fe8 /* Memory DMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xffc00fec /* Memory DMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xffc00ff0 /* Memory DMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xffc00ff8 /* Memory DMA Stream 1 Source Current Y Count Register */ + +/* UART3 Registers */ + +#define UART3_DLL 0xffc03100 /* Divisor Latch Low Byte */ +#define UART3_DLH 0xffc03104 /* Divisor Latch High Byte */ +#define UART3_GCTL 0xffc03108 /* Global Control Register */ +#define UART3_LCR 0xffc0310c /* Line Control Register */ +#define UART3_MCR 0xffc03110 /* Modem Control Register */ +#define UART3_LSR 0xffc03114 /* Line Status Register */ +#define UART3_MSR 0xffc03118 /* Modem Status Register */ +#define UART3_SCR 0xffc0311c /* Scratch Register */ +#define UART3_IER_SET 0xffc03120 /* Interrupt Enable Register Set */ +#define UART3_IER_CLEAR 0xffc03124 /* Interrupt Enable Register Clear */ +#define UART3_THR 0xffc03128 /* Transmit Hold Register */ +#define UART3_RBR 0xffc0312c /* Receive Buffer Register */ + +/* EPPI1 Registers */ + +#define EPPI1_STATUS 0xffc01300 /* EPPI1 Status Register */ +#define EPPI1_HCOUNT 0xffc01304 /* EPPI1 Horizontal Transfer Count Register */ +#define EPPI1_HDELAY 0xffc01308 /* EPPI1 Horizontal Delay Count Register */ +#define EPPI1_VCOUNT 0xffc0130c /* EPPI1 Vertical Transfer Count Register */ +#define EPPI1_VDELAY 0xffc01310 /* EPPI1 Vertical Delay Count Register */ +#define EPPI1_FRAME 0xffc01314 /* EPPI1 Lines per Frame Register */ +#define EPPI1_LINE 0xffc01318 /* EPPI1 Samples per Line Register */ +#define EPPI1_CLKDIV 0xffc0131c /* EPPI1 Clock Divide Register */ +#define EPPI1_CONTROL 0xffc01320 /* EPPI1 Control Register */ +#define EPPI1_FS1W_HBL 0xffc01324 /* EPPI1 FS1 Width Register / EPPI1 Horizontal Blanking Samples Per Line Register */ +#define EPPI1_FS1P_AVPL 0xffc01328 /* EPPI1 FS1 Period Register / EPPI1 Active Video Samples Per Line Register */ +#define EPPI1_FS2W_LVB 0xffc0132c /* EPPI1 FS2 Width Register / EPPI1 Lines of Vertical Blanking Register */ +#define EPPI1_FS2P_LAVF 0xffc01330 /* EPPI1 FS2 Period Register/ EPPI1 Lines of Active Video Per Field Register */ +#define EPPI1_CLIP 0xffc01334 /* EPPI1 Clipping Register */ + +/* Port Interrupt 0 Registers (32-bit) */ + +#define PINT0_MASK_SET 0xffc01400 /* Pin Interrupt 0 Mask Set Register */ +#define PINT0_MASK_CLEAR 0xffc01404 /* Pin Interrupt 0 Mask Clear Register */ +#define PINT0_REQUEST 0xffc01408 /* Pin Interrupt 0 Interrupt Request Register */ +#define PINT0_ASSIGN 0xffc0140c /* Pin Interrupt 0 Port Assign Register */ +#define PINT0_EDGE_SET 0xffc01410 /* Pin Interrupt 0 Edge-sensitivity Set Register */ +#define PINT0_EDGE_CLEAR 0xffc01414 /* Pin Interrupt 0 Edge-sensitivity Clear Register */ +#define PINT0_INVERT_SET 0xffc01418 /* Pin Interrupt 0 Inversion Set Register */ +#define PINT0_INVERT_CLEAR 0xffc0141c /* Pin Interrupt 0 Inversion Clear Register */ +#define PINT0_PINSTATE 0xffc01420 /* Pin Interrupt 0 Pin Status Register */ +#define PINT0_LATCH 0xffc01424 /* Pin Interrupt 0 Latch Register */ + +/* Port Interrupt 1 Registers (32-bit) */ + +#define PINT1_MASK_SET 0xffc01430 /* Pin Interrupt 1 Mask Set Register */ +#define PINT1_MASK_CLEAR 0xffc01434 /* Pin Interrupt 1 Mask Clear Register */ +#define PINT1_REQUEST 0xffc01438 /* Pin Interrupt 1 Interrupt Request Register */ +#define PINT1_ASSIGN 0xffc0143c /* Pin Interrupt 1 Port Assign Register */ +#define PINT1_EDGE_SET 0xffc01440 /* Pin Interrupt 1 Edge-sensitivity Set Register */ +#define PINT1_EDGE_CLEAR 0xffc01444 /* Pin Interrupt 1 Edge-sensitivity Clear Register */ +#define PINT1_INVERT_SET 0xffc01448 /* Pin Interrupt 1 Inversion Set Register */ +#define PINT1_INVERT_CLEAR 0xffc0144c /* Pin Interrupt 1 Inversion Clear Register */ +#define PINT1_PINSTATE 0xffc01450 /* Pin Interrupt 1 Pin Status Register */ +#define PINT1_LATCH 0xffc01454 /* Pin Interrupt 1 Latch Register */ + +/* Port Interrupt 2 Registers (32-bit) */ + +#define PINT2_MASK_SET 0xffc01460 /* Pin Interrupt 2 Mask Set Register */ +#define PINT2_MASK_CLEAR 0xffc01464 /* Pin Interrupt 2 Mask Clear Register */ +#define PINT2_REQUEST 0xffc01468 /* Pin Interrupt 2 Interrupt Request Register */ +#define PINT2_ASSIGN 0xffc0146c /* Pin Interrupt 2 Port Assign Register */ +#define PINT2_EDGE_SET 0xffc01470 /* Pin Interrupt 2 Edge-sensitivity Set Register */ +#define PINT2_EDGE_CLEAR 0xffc01474 /* Pin Interrupt 2 Edge-sensitivity Clear Register */ +#define PINT2_INVERT_SET 0xffc01478 /* Pin Interrupt 2 Inversion Set Register */ +#define PINT2_INVERT_CLEAR 0xffc0147c /* Pin Interrupt 2 Inversion Clear Register */ +#define PINT2_PINSTATE 0xffc01480 /* Pin Interrupt 2 Pin Status Register */ +#define PINT2_LATCH 0xffc01484 /* Pin Interrupt 2 Latch Register */ + +/* Port Interrupt 3 Registers (32-bit) */ + +#define PINT3_MASK_SET 0xffc01490 /* Pin Interrupt 3 Mask Set Register */ +#define PINT3_MASK_CLEAR 0xffc01494 /* Pin Interrupt 3 Mask Clear Register */ +#define PINT3_REQUEST 0xffc01498 /* Pin Interrupt 3 Interrupt Request Register */ +#define PINT3_ASSIGN 0xffc0149c /* Pin Interrupt 3 Port Assign Register */ +#define PINT3_EDGE_SET 0xffc014a0 /* Pin Interrupt 3 Edge-sensitivity Set Register */ +#define PINT3_EDGE_CLEAR 0xffc014a4 /* Pin Interrupt 3 Edge-sensitivity Clear Register */ +#define PINT3_INVERT_SET 0xffc014a8 /* Pin Interrupt 3 Inversion Set Register */ +#define PINT3_INVERT_CLEAR 0xffc014ac /* Pin Interrupt 3 Inversion Clear Register */ +#define PINT3_PINSTATE 0xffc014b0 /* Pin Interrupt 3 Pin Status Register */ +#define PINT3_LATCH 0xffc014b4 /* Pin Interrupt 3 Latch Register */ + +/* Port A Registers */ + +#define PORTA_FER 0xffc014c0 /* Function Enable Register */ +#define PORTA 0xffc014c4 /* GPIO Data Register */ +#define PORTA_SET 0xffc014c8 /* GPIO Data Set Register */ +#define PORTA_CLEAR 0xffc014cc /* GPIO Data Clear Register */ +#define PORTA_DIR_SET 0xffc014d0 /* GPIO Direction Set Register */ +#define PORTA_DIR_CLEAR 0xffc014d4 /* GPIO Direction Clear Register */ +#define PORTA_INEN 0xffc014d8 /* GPIO Input Enable Register */ +#define PORTA_MUX 0xffc014dc /* Multiplexer Control Register */ + +/* Port B Registers */ + +#define PORTB_FER 0xffc014e0 /* Function Enable Register */ +#define PORTB 0xffc014e4 /* GPIO Data Register */ +#define PORTB_SET 0xffc014e8 /* GPIO Data Set Register */ +#define PORTB_CLEAR 0xffc014ec /* GPIO Data Clear Register */ +#define PORTB_DIR_SET 0xffc014f0 /* GPIO Direction Set Register */ +#define PORTB_DIR_CLEAR 0xffc014f4 /* GPIO Direction Clear Register */ +#define PORTB_INEN 0xffc014f8 /* GPIO Input Enable Register */ +#define PORTB_MUX 0xffc014fc /* Multiplexer Control Register */ + +/* Port C Registers */ + +#define PORTC_FER 0xffc01500 /* Function Enable Register */ +#define PORTC 0xffc01504 /* GPIO Data Register */ +#define PORTC_SET 0xffc01508 /* GPIO Data Set Register */ +#define PORTC_CLEAR 0xffc0150c /* GPIO Data Clear Register */ +#define PORTC_DIR_SET 0xffc01510 /* GPIO Direction Set Register */ +#define PORTC_DIR_CLEAR 0xffc01514 /* GPIO Direction Clear Register */ +#define PORTC_INEN 0xffc01518 /* GPIO Input Enable Register */ +#define PORTC_MUX 0xffc0151c /* Multiplexer Control Register */ + +/* Port D Registers */ + +#define PORTD_FER 0xffc01520 /* Function Enable Register */ +#define PORTD 0xffc01524 /* GPIO Data Register */ +#define PORTD_SET 0xffc01528 /* GPIO Data Set Register */ +#define PORTD_CLEAR 0xffc0152c /* GPIO Data Clear Register */ +#define PORTD_DIR_SET 0xffc01530 /* GPIO Direction Set Register */ +#define PORTD_DIR_CLEAR 0xffc01534 /* GPIO Direction Clear Register */ +#define PORTD_INEN 0xffc01538 /* GPIO Input Enable Register */ +#define PORTD_MUX 0xffc0153c /* Multiplexer Control Register */ + +/* Port E Registers */ + +#define PORTE_FER 0xffc01540 /* Function Enable Register */ +#define PORTE 0xffc01544 /* GPIO Data Register */ +#define PORTE_SET 0xffc01548 /* GPIO Data Set Register */ +#define PORTE_CLEAR 0xffc0154c /* GPIO Data Clear Register */ +#define PORTE_DIR_SET 0xffc01550 /* GPIO Direction Set Register */ +#define PORTE_DIR_CLEAR 0xffc01554 /* GPIO Direction Clear Register */ +#define PORTE_INEN 0xffc01558 /* GPIO Input Enable Register */ +#define PORTE_MUX 0xffc0155c /* Multiplexer Control Register */ + +/* Port F Registers */ + +#define PORTF_FER 0xffc01560 /* Function Enable Register */ +#define PORTF 0xffc01564 /* GPIO Data Register */ +#define PORTF_SET 0xffc01568 /* GPIO Data Set Register */ +#define PORTF_CLEAR 0xffc0156c /* GPIO Data Clear Register */ +#define PORTF_DIR_SET 0xffc01570 /* GPIO Direction Set Register */ +#define PORTF_DIR_CLEAR 0xffc01574 /* GPIO Direction Clear Register */ +#define PORTF_INEN 0xffc01578 /* GPIO Input Enable Register */ +#define PORTF_MUX 0xffc0157c /* Multiplexer Control Register */ + +/* Port G Registers */ + +#define PORTG_FER 0xffc01580 /* Function Enable Register */ +#define PORTG 0xffc01584 /* GPIO Data Register */ +#define PORTG_SET 0xffc01588 /* GPIO Data Set Register */ +#define PORTG_CLEAR 0xffc0158c /* GPIO Data Clear Register */ +#define PORTG_DIR_SET 0xffc01590 /* GPIO Direction Set Register */ +#define PORTG_DIR_CLEAR 0xffc01594 /* GPIO Direction Clear Register */ +#define PORTG_INEN 0xffc01598 /* GPIO Input Enable Register */ +#define PORTG_MUX 0xffc0159c /* Multiplexer Control Register */ + +/* Port H Registers */ + +#define PORTH_FER 0xffc015a0 /* Function Enable Register */ +#define PORTH 0xffc015a4 /* GPIO Data Register */ +#define PORTH_SET 0xffc015a8 /* GPIO Data Set Register */ +#define PORTH_CLEAR 0xffc015ac /* GPIO Data Clear Register */ +#define PORTH_DIR_SET 0xffc015b0 /* GPIO Direction Set Register */ +#define PORTH_DIR_CLEAR 0xffc015b4 /* GPIO Direction Clear Register */ +#define PORTH_INEN 0xffc015b8 /* GPIO Input Enable Register */ +#define PORTH_MUX 0xffc015bc /* Multiplexer Control Register */ + +/* Port I Registers */ + +#define PORTI_FER 0xffc015c0 /* Function Enable Register */ +#define PORTI 0xffc015c4 /* GPIO Data Register */ +#define PORTI_SET 0xffc015c8 /* GPIO Data Set Register */ +#define PORTI_CLEAR 0xffc015cc /* GPIO Data Clear Register */ +#define PORTI_DIR_SET 0xffc015d0 /* GPIO Direction Set Register */ +#define PORTI_DIR_CLEAR 0xffc015d4 /* GPIO Direction Clear Register */ +#define PORTI_INEN 0xffc015d8 /* GPIO Input Enable Register */ +#define PORTI_MUX 0xffc015dc /* Multiplexer Control Register */ + +/* Port J Registers */ + +#define PORTJ_FER 0xffc015e0 /* Function Enable Register */ +#define PORTJ 0xffc015e4 /* GPIO Data Register */ +#define PORTJ_SET 0xffc015e8 /* GPIO Data Set Register */ +#define PORTJ_CLEAR 0xffc015ec /* GPIO Data Clear Register */ +#define PORTJ_DIR_SET 0xffc015f0 /* GPIO Direction Set Register */ +#define PORTJ_DIR_CLEAR 0xffc015f4 /* GPIO Direction Clear Register */ +#define PORTJ_INEN 0xffc015f8 /* GPIO Input Enable Register */ +#define PORTJ_MUX 0xffc015fc /* Multiplexer Control Register */ + +/* PWM Timer Registers */ + +#define TIMER0_CONFIG 0xffc01600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xffc01604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xffc01608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xffc0160c /* Timer 0 Width Register */ +#define TIMER1_CONFIG 0xffc01610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xffc01614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xffc01618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xffc0161c /* Timer 1 Width Register */ +#define TIMER2_CONFIG 0xffc01620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xffc01624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xffc01628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xffc0162c /* Timer 2 Width Register */ +#define TIMER3_CONFIG 0xffc01630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xffc01634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xffc01638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xffc0163c /* Timer 3 Width Register */ +#define TIMER4_CONFIG 0xffc01640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xffc01644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xffc01648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xffc0164c /* Timer 4 Width Register */ +#define TIMER5_CONFIG 0xffc01650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xffc01654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xffc01658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xffc0165c /* Timer 5 Width Register */ +#define TIMER6_CONFIG 0xffc01660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xffc01664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xffc01668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xffc0166c /* Timer 6 Width Register */ +#define TIMER7_CONFIG 0xffc01670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xffc01674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xffc01678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xffc0167c /* Timer 7 Width Register */ + +/* Timer Group of 8 */ + +#define TIMER_ENABLE0 0xffc01680 /* Timer Group of 8 Enable Register */ +#define TIMER_DISABLE0 0xffc01684 /* Timer Group of 8 Disable Register */ +#define TIMER_STATUS0 0xffc01688 /* Timer Group of 8 Status Register */ + +/* DMAC1 Registers */ + +#define DMAC1_TCPER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ +#define DMAC1_TCCNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ + +/* DMA Channel 12 Registers */ + +#define DMA12_NEXT_DESC_PTR 0xffc01c00 /* DMA Channel 12 Next Descriptor Pointer Register */ +#define DMA12_START_ADDR 0xffc01c04 /* DMA Channel 12 Start Address Register */ +#define DMA12_CONFIG 0xffc01c08 /* DMA Channel 12 Configuration Register */ +#define DMA12_X_COUNT 0xffc01c10 /* DMA Channel 12 X Count Register */ +#define DMA12_X_MODIFY 0xffc01c14 /* DMA Channel 12 X Modify Register */ +#define DMA12_Y_COUNT 0xffc01c18 /* DMA Channel 12 Y Count Register */ +#define DMA12_Y_MODIFY 0xffc01c1c /* DMA Channel 12 Y Modify Register */ +#define DMA12_CURR_DESC_PTR 0xffc01c20 /* DMA Channel 12 Current Descriptor Pointer Register */ +#define DMA12_CURR_ADDR 0xffc01c24 /* DMA Channel 12 Current Address Register */ +#define DMA12_IRQ_STATUS 0xffc01c28 /* DMA Channel 12 Interrupt/Status Register */ +#define DMA12_PERIPHERAL_MAP 0xffc01c2c /* DMA Channel 12 Peripheral Map Register */ +#define DMA12_CURR_X_COUNT 0xffc01c30 /* DMA Channel 12 Current X Count Register */ +#define DMA12_CURR_Y_COUNT 0xffc01c38 /* DMA Channel 12 Current Y Count Register */ + +/* DMA Channel 13 Registers */ + +#define DMA13_NEXT_DESC_PTR 0xffc01c40 /* DMA Channel 13 Next Descriptor Pointer Register */ +#define DMA13_START_ADDR 0xffc01c44 /* DMA Channel 13 Start Address Register */ +#define DMA13_CONFIG 0xffc01c48 /* DMA Channel 13 Configuration Register */ +#define DMA13_X_COUNT 0xffc01c50 /* DMA Channel 13 X Count Register */ +#define DMA13_X_MODIFY 0xffc01c54 /* DMA Channel 13 X Modify Register */ +#define DMA13_Y_COUNT 0xffc01c58 /* DMA Channel 13 Y Count Register */ +#define DMA13_Y_MODIFY 0xffc01c5c /* DMA Channel 13 Y Modify Register */ +#define DMA13_CURR_DESC_PTR 0xffc01c60 /* DMA Channel 13 Current Descriptor Pointer Register */ +#define DMA13_CURR_ADDR 0xffc01c64 /* DMA Channel 13 Current Address Register */ +#define DMA13_IRQ_STATUS 0xffc01c68 /* DMA Channel 13 Interrupt/Status Register */ +#define DMA13_PERIPHERAL_MAP 0xffc01c6c /* DMA Channel 13 Peripheral Map Register */ +#define DMA13_CURR_X_COUNT 0xffc01c70 /* DMA Channel 13 Current X Count Register */ +#define DMA13_CURR_Y_COUNT 0xffc01c78 /* DMA Channel 13 Current Y Count Register */ + +/* DMA Channel 14 Registers */ + +#define DMA14_NEXT_DESC_PTR 0xffc01c80 /* DMA Channel 14 Next Descriptor Pointer Register */ +#define DMA14_START_ADDR 0xffc01c84 /* DMA Channel 14 Start Address Register */ +#define DMA14_CONFIG 0xffc01c88 /* DMA Channel 14 Configuration Register */ +#define DMA14_X_COUNT 0xffc01c90 /* DMA Channel 14 X Count Register */ +#define DMA14_X_MODIFY 0xffc01c94 /* DMA Channel 14 X Modify Register */ +#define DMA14_Y_COUNT 0xffc01c98 /* DMA Channel 14 Y Count Register */ +#define DMA14_Y_MODIFY 0xffc01c9c /* DMA Channel 14 Y Modify Register */ +#define DMA14_CURR_DESC_PTR 0xffc01ca0 /* DMA Channel 14 Current Descriptor Pointer Register */ +#define DMA14_CURR_ADDR 0xffc01ca4 /* DMA Channel 14 Current Address Register */ +#define DMA14_IRQ_STATUS 0xffc01ca8 /* DMA Channel 14 Interrupt/Status Register */ +#define DMA14_PERIPHERAL_MAP 0xffc01cac /* DMA Channel 14 Peripheral Map Register */ +#define DMA14_CURR_X_COUNT 0xffc01cb0 /* DMA Channel 14 Current X Count Register */ +#define DMA14_CURR_Y_COUNT 0xffc01cb8 /* DMA Channel 14 Current Y Count Register */ + +/* DMA Channel 15 Registers */ + +#define DMA15_NEXT_DESC_PTR 0xffc01cc0 /* DMA Channel 15 Next Descriptor Pointer Register */ +#define DMA15_START_ADDR 0xffc01cc4 /* DMA Channel 15 Start Address Register */ +#define DMA15_CONFIG 0xffc01cc8 /* DMA Channel 15 Configuration Register */ +#define DMA15_X_COUNT 0xffc01cd0 /* DMA Channel 15 X Count Register */ +#define DMA15_X_MODIFY 0xffc01cd4 /* DMA Channel 15 X Modify Register */ +#define DMA15_Y_COUNT 0xffc01cd8 /* DMA Channel 15 Y Count Register */ +#define DMA15_Y_MODIFY 0xffc01cdc /* DMA Channel 15 Y Modify Register */ +#define DMA15_CURR_DESC_PTR 0xffc01ce0 /* DMA Channel 15 Current Descriptor Pointer Register */ +#define DMA15_CURR_ADDR 0xffc01ce4 /* DMA Channel 15 Current Address Register */ +#define DMA15_IRQ_STATUS 0xffc01ce8 /* DMA Channel 15 Interrupt/Status Register */ +#define DMA15_PERIPHERAL_MAP 0xffc01cec /* DMA Channel 15 Peripheral Map Register */ +#define DMA15_CURR_X_COUNT 0xffc01cf0 /* DMA Channel 15 Current X Count Register */ +#define DMA15_CURR_Y_COUNT 0xffc01cf8 /* DMA Channel 15 Current Y Count Register */ + +/* DMA Channel 16 Registers */ + +#define DMA16_NEXT_DESC_PTR 0xffc01d00 /* DMA Channel 16 Next Descriptor Pointer Register */ +#define DMA16_START_ADDR 0xffc01d04 /* DMA Channel 16 Start Address Register */ +#define DMA16_CONFIG 0xffc01d08 /* DMA Channel 16 Configuration Register */ +#define DMA16_X_COUNT 0xffc01d10 /* DMA Channel 16 X Count Register */ +#define DMA16_X_MODIFY 0xffc01d14 /* DMA Channel 16 X Modify Register */ +#define DMA16_Y_COUNT 0xffc01d18 /* DMA Channel 16 Y Count Register */ +#define DMA16_Y_MODIFY 0xffc01d1c /* DMA Channel 16 Y Modify Register */ +#define DMA16_CURR_DESC_PTR 0xffc01d20 /* DMA Channel 16 Current Descriptor Pointer Register */ +#define DMA16_CURR_ADDR 0xffc01d24 /* DMA Channel 16 Current Address Register */ +#define DMA16_IRQ_STATUS 0xffc01d28 /* DMA Channel 16 Interrupt/Status Register */ +#define DMA16_PERIPHERAL_MAP 0xffc01d2c /* DMA Channel 16 Peripheral Map Register */ +#define DMA16_CURR_X_COUNT 0xffc01d30 /* DMA Channel 16 Current X Count Register */ +#define DMA16_CURR_Y_COUNT 0xffc01d38 /* DMA Channel 16 Current Y Count Register */ + +/* DMA Channel 17 Registers */ + +#define DMA17_NEXT_DESC_PTR 0xffc01d40 /* DMA Channel 17 Next Descriptor Pointer Register */ +#define DMA17_START_ADDR 0xffc01d44 /* DMA Channel 17 Start Address Register */ +#define DMA17_CONFIG 0xffc01d48 /* DMA Channel 17 Configuration Register */ +#define DMA17_X_COUNT 0xffc01d50 /* DMA Channel 17 X Count Register */ +#define DMA17_X_MODIFY 0xffc01d54 /* DMA Channel 17 X Modify Register */ +#define DMA17_Y_COUNT 0xffc01d58 /* DMA Channel 17 Y Count Register */ +#define DMA17_Y_MODIFY 0xffc01d5c /* DMA Channel 17 Y Modify Register */ +#define DMA17_CURR_DESC_PTR 0xffc01d60 /* DMA Channel 17 Current Descriptor Pointer Register */ +#define DMA17_CURR_ADDR 0xffc01d64 /* DMA Channel 17 Current Address Register */ +#define DMA17_IRQ_STATUS 0xffc01d68 /* DMA Channel 17 Interrupt/Status Register */ +#define DMA17_PERIPHERAL_MAP 0xffc01d6c /* DMA Channel 17 Peripheral Map Register */ +#define DMA17_CURR_X_COUNT 0xffc01d70 /* DMA Channel 17 Current X Count Register */ +#define DMA17_CURR_Y_COUNT 0xffc01d78 /* DMA Channel 17 Current Y Count Register */ + +/* DMA Channel 18 Registers */ + +#define DMA18_NEXT_DESC_PTR 0xffc01d80 /* DMA Channel 18 Next Descriptor Pointer Register */ +#define DMA18_START_ADDR 0xffc01d84 /* DMA Channel 18 Start Address Register */ +#define DMA18_CONFIG 0xffc01d88 /* DMA Channel 18 Configuration Register */ +#define DMA18_X_COUNT 0xffc01d90 /* DMA Channel 18 X Count Register */ +#define DMA18_X_MODIFY 0xffc01d94 /* DMA Channel 18 X Modify Register */ +#define DMA18_Y_COUNT 0xffc01d98 /* DMA Channel 18 Y Count Register */ +#define DMA18_Y_MODIFY 0xffc01d9c /* DMA Channel 18 Y Modify Register */ +#define DMA18_CURR_DESC_PTR 0xffc01da0 /* DMA Channel 18 Current Descriptor Pointer Register */ +#define DMA18_CURR_ADDR 0xffc01da4 /* DMA Channel 18 Current Address Register */ +#define DMA18_IRQ_STATUS 0xffc01da8 /* DMA Channel 18 Interrupt/Status Register */ +#define DMA18_PERIPHERAL_MAP 0xffc01dac /* DMA Channel 18 Peripheral Map Register */ +#define DMA18_CURR_X_COUNT 0xffc01db0 /* DMA Channel 18 Current X Count Register */ +#define DMA18_CURR_Y_COUNT 0xffc01db8 /* DMA Channel 18 Current Y Count Register */ + +/* DMA Channel 19 Registers */ + +#define DMA19_NEXT_DESC_PTR 0xffc01dc0 /* DMA Channel 19 Next Descriptor Pointer Register */ +#define DMA19_START_ADDR 0xffc01dc4 /* DMA Channel 19 Start Address Register */ +#define DMA19_CONFIG 0xffc01dc8 /* DMA Channel 19 Configuration Register */ +#define DMA19_X_COUNT 0xffc01dd0 /* DMA Channel 19 X Count Register */ +#define DMA19_X_MODIFY 0xffc01dd4 /* DMA Channel 19 X Modify Register */ +#define DMA19_Y_COUNT 0xffc01dd8 /* DMA Channel 19 Y Count Register */ +#define DMA19_Y_MODIFY 0xffc01ddc /* DMA Channel 19 Y Modify Register */ +#define DMA19_CURR_DESC_PTR 0xffc01de0 /* DMA Channel 19 Current Descriptor Pointer Register */ +#define DMA19_CURR_ADDR 0xffc01de4 /* DMA Channel 19 Current Address Register */ +#define DMA19_IRQ_STATUS 0xffc01de8 /* DMA Channel 19 Interrupt/Status Register */ +#define DMA19_PERIPHERAL_MAP 0xffc01dec /* DMA Channel 19 Peripheral Map Register */ +#define DMA19_CURR_X_COUNT 0xffc01df0 /* DMA Channel 19 Current X Count Register */ +#define DMA19_CURR_Y_COUNT 0xffc01df8 /* DMA Channel 19 Current Y Count Register */ + +/* DMA Channel 20 Registers */ + +#define DMA20_NEXT_DESC_PTR 0xffc01e00 /* DMA Channel 20 Next Descriptor Pointer Register */ +#define DMA20_START_ADDR 0xffc01e04 /* DMA Channel 20 Start Address Register */ +#define DMA20_CONFIG 0xffc01e08 /* DMA Channel 20 Configuration Register */ +#define DMA20_X_COUNT 0xffc01e10 /* DMA Channel 20 X Count Register */ +#define DMA20_X_MODIFY 0xffc01e14 /* DMA Channel 20 X Modify Register */ +#define DMA20_Y_COUNT 0xffc01e18 /* DMA Channel 20 Y Count Register */ +#define DMA20_Y_MODIFY 0xffc01e1c /* DMA Channel 20 Y Modify Register */ +#define DMA20_CURR_DESC_PTR 0xffc01e20 /* DMA Channel 20 Current Descriptor Pointer Register */ +#define DMA20_CURR_ADDR 0xffc01e24 /* DMA Channel 20 Current Address Register */ +#define DMA20_IRQ_STATUS 0xffc01e28 /* DMA Channel 20 Interrupt/Status Register */ +#define DMA20_PERIPHERAL_MAP 0xffc01e2c /* DMA Channel 20 Peripheral Map Register */ +#define DMA20_CURR_X_COUNT 0xffc01e30 /* DMA Channel 20 Current X Count Register */ +#define DMA20_CURR_Y_COUNT 0xffc01e38 /* DMA Channel 20 Current Y Count Register */ + +/* DMA Channel 21 Registers */ + +#define DMA21_NEXT_DESC_PTR 0xffc01e40 /* DMA Channel 21 Next Descriptor Pointer Register */ +#define DMA21_START_ADDR 0xffc01e44 /* DMA Channel 21 Start Address Register */ +#define DMA21_CONFIG 0xffc01e48 /* DMA Channel 21 Configuration Register */ +#define DMA21_X_COUNT 0xffc01e50 /* DMA Channel 21 X Count Register */ +#define DMA21_X_MODIFY 0xffc01e54 /* DMA Channel 21 X Modify Register */ +#define DMA21_Y_COUNT 0xffc01e58 /* DMA Channel 21 Y Count Register */ +#define DMA21_Y_MODIFY 0xffc01e5c /* DMA Channel 21 Y Modify Register */ +#define DMA21_CURR_DESC_PTR 0xffc01e60 /* DMA Channel 21 Current Descriptor Pointer Register */ +#define DMA21_CURR_ADDR 0xffc01e64 /* DMA Channel 21 Current Address Register */ +#define DMA21_IRQ_STATUS 0xffc01e68 /* DMA Channel 21 Interrupt/Status Register */ +#define DMA21_PERIPHERAL_MAP 0xffc01e6c /* DMA Channel 21 Peripheral Map Register */ +#define DMA21_CURR_X_COUNT 0xffc01e70 /* DMA Channel 21 Current X Count Register */ +#define DMA21_CURR_Y_COUNT 0xffc01e78 /* DMA Channel 21 Current Y Count Register */ + +/* DMA Channel 22 Registers */ + +#define DMA22_NEXT_DESC_PTR 0xffc01e80 /* DMA Channel 22 Next Descriptor Pointer Register */ +#define DMA22_START_ADDR 0xffc01e84 /* DMA Channel 22 Start Address Register */ +#define DMA22_CONFIG 0xffc01e88 /* DMA Channel 22 Configuration Register */ +#define DMA22_X_COUNT 0xffc01e90 /* DMA Channel 22 X Count Register */ +#define DMA22_X_MODIFY 0xffc01e94 /* DMA Channel 22 X Modify Register */ +#define DMA22_Y_COUNT 0xffc01e98 /* DMA Channel 22 Y Count Register */ +#define DMA22_Y_MODIFY 0xffc01e9c /* DMA Channel 22 Y Modify Register */ +#define DMA22_CURR_DESC_PTR 0xffc01ea0 /* DMA Channel 22 Current Descriptor Pointer Register */ +#define DMA22_CURR_ADDR 0xffc01ea4 /* DMA Channel 22 Current Address Register */ +#define DMA22_IRQ_STATUS 0xffc01ea8 /* DMA Channel 22 Interrupt/Status Register */ +#define DMA22_PERIPHERAL_MAP 0xffc01eac /* DMA Channel 22 Peripheral Map Register */ +#define DMA22_CURR_X_COUNT 0xffc01eb0 /* DMA Channel 22 Current X Count Register */ +#define DMA22_CURR_Y_COUNT 0xffc01eb8 /* DMA Channel 22 Current Y Count Register */ + +/* DMA Channel 23 Registers */ + +#define DMA23_NEXT_DESC_PTR 0xffc01ec0 /* DMA Channel 23 Next Descriptor Pointer Register */ +#define DMA23_START_ADDR 0xffc01ec4 /* DMA Channel 23 Start Address Register */ +#define DMA23_CONFIG 0xffc01ec8 /* DMA Channel 23 Configuration Register */ +#define DMA23_X_COUNT 0xffc01ed0 /* DMA Channel 23 X Count Register */ +#define DMA23_X_MODIFY 0xffc01ed4 /* DMA Channel 23 X Modify Register */ +#define DMA23_Y_COUNT 0xffc01ed8 /* DMA Channel 23 Y Count Register */ +#define DMA23_Y_MODIFY 0xffc01edc /* DMA Channel 23 Y Modify Register */ +#define DMA23_CURR_DESC_PTR 0xffc01ee0 /* DMA Channel 23 Current Descriptor Pointer Register */ +#define DMA23_CURR_ADDR 0xffc01ee4 /* DMA Channel 23 Current Address Register */ +#define DMA23_IRQ_STATUS 0xffc01ee8 /* DMA Channel 23 Interrupt/Status Register */ +#define DMA23_PERIPHERAL_MAP 0xffc01eec /* DMA Channel 23 Peripheral Map Register */ +#define DMA23_CURR_X_COUNT 0xffc01ef0 /* DMA Channel 23 Current X Count Register */ +#define DMA23_CURR_Y_COUNT 0xffc01ef8 /* DMA Channel 23 Current Y Count Register */ + +/* MDMA Stream 2 Registers */ + +#define MDMA_D2_NEXT_DESC_PTR 0xffc01f00 /* Memory DMA Stream 2 Destination Next Descriptor Pointer Register */ +#define MDMA_D2_START_ADDR 0xffc01f04 /* Memory DMA Stream 2 Destination Start Address Register */ +#define MDMA_D2_CONFIG 0xffc01f08 /* Memory DMA Stream 2 Destination Configuration Register */ +#define MDMA_D2_X_COUNT 0xffc01f10 /* Memory DMA Stream 2 Destination X Count Register */ +#define MDMA_D2_X_MODIFY 0xffc01f14 /* Memory DMA Stream 2 Destination X Modify Register */ +#define MDMA_D2_Y_COUNT 0xffc01f18 /* Memory DMA Stream 2 Destination Y Count Register */ +#define MDMA_D2_Y_MODIFY 0xffc01f1c /* Memory DMA Stream 2 Destination Y Modify Register */ +#define MDMA_D2_CURR_DESC_PTR 0xffc01f20 /* Memory DMA Stream 2 Destination Current Descriptor Pointer Register */ +#define MDMA_D2_CURR_ADDR 0xffc01f24 /* Memory DMA Stream 2 Destination Current Address Register */ +#define MDMA_D2_IRQ_STATUS 0xffc01f28 /* Memory DMA Stream 2 Destination Interrupt/Status Register */ +#define MDMA_D2_PERIPHERAL_MAP 0xffc01f2c /* Memory DMA Stream 2 Destination Peripheral Map Register */ +#define MDMA_D2_CURR_X_COUNT 0xffc01f30 /* Memory DMA Stream 2 Destination Current X Count Register */ +#define MDMA_D2_CURR_Y_COUNT 0xffc01f38 /* Memory DMA Stream 2 Destination Current Y Count Register */ +#define MDMA_S2_NEXT_DESC_PTR 0xffc01f40 /* Memory DMA Stream 2 Source Next Descriptor Pointer Register */ +#define MDMA_S2_START_ADDR 0xffc01f44 /* Memory DMA Stream 2 Source Start Address Register */ +#define MDMA_S2_CONFIG 0xffc01f48 /* Memory DMA Stream 2 Source Configuration Register */ +#define MDMA_S2_X_COUNT 0xffc01f50 /* Memory DMA Stream 2 Source X Count Register */ +#define MDMA_S2_X_MODIFY 0xffc01f54 /* Memory DMA Stream 2 Source X Modify Register */ +#define MDMA_S2_Y_COUNT 0xffc01f58 /* Memory DMA Stream 2 Source Y Count Register */ +#define MDMA_S2_Y_MODIFY 0xffc01f5c /* Memory DMA Stream 2 Source Y Modify Register */ +#define MDMA_S2_CURR_DESC_PTR 0xffc01f60 /* Memory DMA Stream 2 Source Current Descriptor Pointer Register */ +#define MDMA_S2_CURR_ADDR 0xffc01f64 /* Memory DMA Stream 2 Source Current Address Register */ +#define MDMA_S2_IRQ_STATUS 0xffc01f68 /* Memory DMA Stream 2 Source Interrupt/Status Register */ +#define MDMA_S2_PERIPHERAL_MAP 0xffc01f6c /* Memory DMA Stream 2 Source Peripheral Map Register */ +#define MDMA_S2_CURR_X_COUNT 0xffc01f70 /* Memory DMA Stream 2 Source Current X Count Register */ +#define MDMA_S2_CURR_Y_COUNT 0xffc01f78 /* Memory DMA Stream 2 Source Current Y Count Register */ + +/* MDMA Stream 3 Registers */ + +#define MDMA_D3_NEXT_DESC_PTR 0xffc01f80 /* Memory DMA Stream 3 Destination Next Descriptor Pointer Register */ +#define MDMA_D3_START_ADDR 0xffc01f84 /* Memory DMA Stream 3 Destination Start Address Register */ +#define MDMA_D3_CONFIG 0xffc01f88 /* Memory DMA Stream 3 Destination Configuration Register */ +#define MDMA_D3_X_COUNT 0xffc01f90 /* Memory DMA Stream 3 Destination X Count Register */ +#define MDMA_D3_X_MODIFY 0xffc01f94 /* Memory DMA Stream 3 Destination X Modify Register */ +#define MDMA_D3_Y_COUNT 0xffc01f98 /* Memory DMA Stream 3 Destination Y Count Register */ +#define MDMA_D3_Y_MODIFY 0xffc01f9c /* Memory DMA Stream 3 Destination Y Modify Register */ +#define MDMA_D3_CURR_DESC_PTR 0xffc01fa0 /* Memory DMA Stream 3 Destination Current Descriptor Pointer Register */ +#define MDMA_D3_CURR_ADDR 0xffc01fa4 /* Memory DMA Stream 3 Destination Current Address Register */ +#define MDMA_D3_IRQ_STATUS 0xffc01fa8 /* Memory DMA Stream 3 Destination Interrupt/Status Register */ +#define MDMA_D3_PERIPHERAL_MAP 0xffc01fac /* Memory DMA Stream 3 Destination Peripheral Map Register */ +#define MDMA_D3_CURR_X_COUNT 0xffc01fb0 /* Memory DMA Stream 3 Destination Current X Count Register */ +#define MDMA_D3_CURR_Y_COUNT 0xffc01fb8 /* Memory DMA Stream 3 Destination Current Y Count Register */ +#define MDMA_S3_NEXT_DESC_PTR 0xffc01fc0 /* Memory DMA Stream 3 Source Next Descriptor Pointer Register */ +#define MDMA_S3_START_ADDR 0xffc01fc4 /* Memory DMA Stream 3 Source Start Address Register */ +#define MDMA_S3_CONFIG 0xffc01fc8 /* Memory DMA Stream 3 Source Configuration Register */ +#define MDMA_S3_X_COUNT 0xffc01fd0 /* Memory DMA Stream 3 Source X Count Register */ +#define MDMA_S3_X_MODIFY 0xffc01fd4 /* Memory DMA Stream 3 Source X Modify Register */ +#define MDMA_S3_Y_COUNT 0xffc01fd8 /* Memory DMA Stream 3 Source Y Count Register */ +#define MDMA_S3_Y_MODIFY 0xffc01fdc /* Memory DMA Stream 3 Source Y Modify Register */ +#define MDMA_S3_CURR_DESC_PTR 0xffc01fe0 /* Memory DMA Stream 3 Source Current Descriptor Pointer Register */ +#define MDMA_S3_CURR_ADDR 0xffc01fe4 /* Memory DMA Stream 3 Source Current Address Register */ +#define MDMA_S3_IRQ_STATUS 0xffc01fe8 /* Memory DMA Stream 3 Source Interrupt/Status Register */ +#define MDMA_S3_PERIPHERAL_MAP 0xffc01fec /* Memory DMA Stream 3 Source Peripheral Map Register */ +#define MDMA_S3_CURR_X_COUNT 0xffc01ff0 /* Memory DMA Stream 3 Source Current X Count Register */ +#define MDMA_S3_CURR_Y_COUNT 0xffc01ff8 /* Memory DMA Stream 3 Source Current Y Count Register */ + +/* UART1 Registers */ + +#define UART1_DLL 0xffc02000 /* Divisor Latch Low Byte */ +#define UART1_DLH 0xffc02004 /* Divisor Latch High Byte */ +#define UART1_GCTL 0xffc02008 /* Global Control Register */ +#define UART1_LCR 0xffc0200c /* Line Control Register */ +#define UART1_MCR 0xffc02010 /* Modem Control Register */ +#define UART1_LSR 0xffc02014 /* Line Status Register */ +#define UART1_MSR 0xffc02018 /* Modem Status Register */ +#define UART1_SCR 0xffc0201c /* Scratch Register */ +#define UART1_IER_SET 0xffc02020 /* Interrupt Enable Register Set */ +#define UART1_IER_CLEAR 0xffc02024 /* Interrupt Enable Register Clear */ +#define UART1_THR 0xffc02028 /* Transmit Hold Register */ +#define UART1_RBR 0xffc0202c /* Receive Buffer Register */ + +/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */ + +/* SPI1 Registers */ + +#define SPI1_REGBASE 0xffc02300 +#define SPI1_CTL 0xffc02300 /* SPI1 Control Register */ +#define SPI1_FLG 0xffc02304 /* SPI1 Flag Register */ +#define SPI1_STAT 0xffc02308 /* SPI1 Status Register */ +#define SPI1_TDBR 0xffc0230c /* SPI1 Transmit Data Buffer Register */ +#define SPI1_RDBR 0xffc02310 /* SPI1 Receive Data Buffer Register */ +#define SPI1_BAUD 0xffc02314 /* SPI1 Baud Rate Register */ +#define SPI1_SHADOW 0xffc02318 /* SPI1 Receive Data Buffer Shadow Register */ + +/* SPORT2 Registers */ + +#define SPORT2_TCR1 0xffc02500 /* SPORT2 Transmit Configuration 1 Register */ +#define SPORT2_TCR2 0xffc02504 /* SPORT2 Transmit Configuration 2 Register */ +#define SPORT2_TCLKDIV 0xffc02508 /* SPORT2 Transmit Serial Clock Divider Register */ +#define SPORT2_TFSDIV 0xffc0250c /* SPORT2 Transmit Frame Sync Divider Register */ +#define SPORT2_TX 0xffc02510 /* SPORT2 Transmit Data Register */ +#define SPORT2_RX 0xffc02518 /* SPORT2 Receive Data Register */ +#define SPORT2_RCR1 0xffc02520 /* SPORT2 Receive Configuration 1 Register */ +#define SPORT2_RCR2 0xffc02524 /* SPORT2 Receive Configuration 2 Register */ +#define SPORT2_RCLKDIV 0xffc02528 /* SPORT2 Receive Serial Clock Divider Register */ +#define SPORT2_RFSDIV 0xffc0252c /* SPORT2 Receive Frame Sync Divider Register */ +#define SPORT2_STAT 0xffc02530 /* SPORT2 Status Register */ +#define SPORT2_CHNL 0xffc02534 /* SPORT2 Current Channel Register */ +#define SPORT2_MCMC1 0xffc02538 /* SPORT2 Multi channel Configuration Register 1 */ +#define SPORT2_MCMC2 0xffc0253c /* SPORT2 Multi channel Configuration Register 2 */ +#define SPORT2_MTCS0 0xffc02540 /* SPORT2 Multi channel Transmit Select Register 0 */ +#define SPORT2_MTCS1 0xffc02544 /* SPORT2 Multi channel Transmit Select Register 1 */ +#define SPORT2_MTCS2 0xffc02548 /* SPORT2 Multi channel Transmit Select Register 2 */ +#define SPORT2_MTCS3 0xffc0254c /* SPORT2 Multi channel Transmit Select Register 3 */ +#define SPORT2_MRCS0 0xffc02550 /* SPORT2 Multi channel Receive Select Register 0 */ +#define SPORT2_MRCS1 0xffc02554 /* SPORT2 Multi channel Receive Select Register 1 */ +#define SPORT2_MRCS2 0xffc02558 /* SPORT2 Multi channel Receive Select Register 2 */ +#define SPORT2_MRCS3 0xffc0255c /* SPORT2 Multi channel Receive Select Register 3 */ + +/* SPORT3 Registers */ + +#define SPORT3_TCR1 0xffc02600 /* SPORT3 Transmit Configuration 1 Register */ +#define SPORT3_TCR2 0xffc02604 /* SPORT3 Transmit Configuration 2 Register */ +#define SPORT3_TCLKDIV 0xffc02608 /* SPORT3 Transmit Serial Clock Divider Register */ +#define SPORT3_TFSDIV 0xffc0260c /* SPORT3 Transmit Frame Sync Divider Register */ +#define SPORT3_TX 0xffc02610 /* SPORT3 Transmit Data Register */ +#define SPORT3_RX 0xffc02618 /* SPORT3 Receive Data Register */ +#define SPORT3_RCR1 0xffc02620 /* SPORT3 Receive Configuration 1 Register */ +#define SPORT3_RCR2 0xffc02624 /* SPORT3 Receive Configuration 2 Register */ +#define SPORT3_RCLKDIV 0xffc02628 /* SPORT3 Receive Serial Clock Divider Register */ +#define SPORT3_RFSDIV 0xffc0262c /* SPORT3 Receive Frame Sync Divider Register */ +#define SPORT3_STAT 0xffc02630 /* SPORT3 Status Register */ +#define SPORT3_CHNL 0xffc02634 /* SPORT3 Current Channel Register */ +#define SPORT3_MCMC1 0xffc02638 /* SPORT3 Multi channel Configuration Register 1 */ +#define SPORT3_MCMC2 0xffc0263c /* SPORT3 Multi channel Configuration Register 2 */ +#define SPORT3_MTCS0 0xffc02640 /* SPORT3 Multi channel Transmit Select Register 0 */ +#define SPORT3_MTCS1 0xffc02644 /* SPORT3 Multi channel Transmit Select Register 1 */ +#define SPORT3_MTCS2 0xffc02648 /* SPORT3 Multi channel Transmit Select Register 2 */ +#define SPORT3_MTCS3 0xffc0264c /* SPORT3 Multi channel Transmit Select Register 3 */ +#define SPORT3_MRCS0 0xffc02650 /* SPORT3 Multi channel Receive Select Register 0 */ +#define SPORT3_MRCS1 0xffc02654 /* SPORT3 Multi channel Receive Select Register 1 */ +#define SPORT3_MRCS2 0xffc02658 /* SPORT3 Multi channel Receive Select Register 2 */ +#define SPORT3_MRCS3 0xffc0265c /* SPORT3 Multi channel Receive Select Register 3 */ + +/* EPPI2 Registers */ + +#define EPPI2_STATUS 0xffc02900 /* EPPI2 Status Register */ +#define EPPI2_HCOUNT 0xffc02904 /* EPPI2 Horizontal Transfer Count Register */ +#define EPPI2_HDELAY 0xffc02908 /* EPPI2 Horizontal Delay Count Register */ +#define EPPI2_VCOUNT 0xffc0290c /* EPPI2 Vertical Transfer Count Register */ +#define EPPI2_VDELAY 0xffc02910 /* EPPI2 Vertical Delay Count Register */ +#define EPPI2_FRAME 0xffc02914 /* EPPI2 Lines per Frame Register */ +#define EPPI2_LINE 0xffc02918 /* EPPI2 Samples per Line Register */ +#define EPPI2_CLKDIV 0xffc0291c /* EPPI2 Clock Divide Register */ +#define EPPI2_CONTROL 0xffc02920 /* EPPI2 Control Register */ +#define EPPI2_FS1W_HBL 0xffc02924 /* EPPI2 FS1 Width Register / EPPI2 Horizontal Blanking Samples Per Line Register */ +#define EPPI2_FS1P_AVPL 0xffc02928 /* EPPI2 FS1 Period Register / EPPI2 Active Video Samples Per Line Register */ +#define EPPI2_FS2W_LVB 0xffc0292c /* EPPI2 FS2 Width Register / EPPI2 Lines of Vertical Blanking Register */ +#define EPPI2_FS2P_LAVF 0xffc02930 /* EPPI2 FS2 Period Register/ EPPI2 Lines of Active Video Per Field Register */ +#define EPPI2_CLIP 0xffc02934 /* EPPI2 Clipping Register */ + +/* CAN Controller 0 Config 1 Registers */ + +#define CAN0_MC1 0xffc02a00 /* CAN Controller 0 Mailbox Configuration Register 1 */ +#define CAN0_MD1 0xffc02a04 /* CAN Controller 0 Mailbox Direction Register 1 */ +#define CAN0_TRS1 0xffc02a08 /* CAN Controller 0 Transmit Request Set Register 1 */ +#define CAN0_TRR1 0xffc02a0c /* CAN Controller 0 Transmit Request Reset Register 1 */ +#define CAN0_TA1 0xffc02a10 /* CAN Controller 0 Transmit Acknowledge Register 1 */ +#define CAN0_AA1 0xffc02a14 /* CAN Controller 0 Abort Acknowledge Register 1 */ +#define CAN0_RMP1 0xffc02a18 /* CAN Controller 0 Receive Message Pending Register 1 */ +#define CAN0_RML1 0xffc02a1c /* CAN Controller 0 Receive Message Lost Register 1 */ +#define CAN0_MBTIF1 0xffc02a20 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN0_MBRIF1 0xffc02a24 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN0_MBIM1 0xffc02a28 /* CAN Controller 0 Mailbox Interrupt Mask Register 1 */ +#define CAN0_RFH1 0xffc02a2c /* CAN Controller 0 Remote Frame Handling Enable Register 1 */ +#define CAN0_OPSS1 0xffc02a30 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 0 Config 2 Registers */ + +#define CAN0_MC2 0xffc02a40 /* CAN Controller 0 Mailbox Configuration Register 2 */ +#define CAN0_MD2 0xffc02a44 /* CAN Controller 0 Mailbox Direction Register 2 */ +#define CAN0_TRS2 0xffc02a48 /* CAN Controller 0 Transmit Request Set Register 2 */ +#define CAN0_TRR2 0xffc02a4c /* CAN Controller 0 Transmit Request Reset Register 2 */ +#define CAN0_TA2 0xffc02a50 /* CAN Controller 0 Transmit Acknowledge Register 2 */ +#define CAN0_AA2 0xffc02a54 /* CAN Controller 0 Abort Acknowledge Register 2 */ +#define CAN0_RMP2 0xffc02a58 /* CAN Controller 0 Receive Message Pending Register 2 */ +#define CAN0_RML2 0xffc02a5c /* CAN Controller 0 Receive Message Lost Register 2 */ +#define CAN0_MBTIF2 0xffc02a60 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN0_MBRIF2 0xffc02a64 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN0_MBIM2 0xffc02a68 /* CAN Controller 0 Mailbox Interrupt Mask Register 2 */ +#define CAN0_RFH2 0xffc02a6c /* CAN Controller 0 Remote Frame Handling Enable Register 2 */ +#define CAN0_OPSS2 0xffc02a70 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 0 Clock/Interrupt/Counter Registers */ + +#define CAN0_CLOCK 0xffc02a80 /* CAN Controller 0 Clock Register */ +#define CAN0_TIMING 0xffc02a84 /* CAN Controller 0 Timing Register */ +#define CAN0_DEBUG 0xffc02a88 /* CAN Controller 0 Debug Register */ +#define CAN0_STATUS 0xffc02a8c /* CAN Controller 0 Global Status Register */ +#define CAN0_CEC 0xffc02a90 /* CAN Controller 0 Error Counter Register */ +#define CAN0_GIS 0xffc02a94 /* CAN Controller 0 Global Interrupt Status Register */ +#define CAN0_GIM 0xffc02a98 /* CAN Controller 0 Global Interrupt Mask Register */ +#define CAN0_GIF 0xffc02a9c /* CAN Controller 0 Global Interrupt Flag Register */ +#define CAN0_CONTROL 0xffc02aa0 /* CAN Controller 0 Master Control Register */ +#define CAN0_INTR 0xffc02aa4 /* CAN Controller 0 Interrupt Pending Register */ +#define CAN0_MBTD 0xffc02aac /* CAN Controller 0 Mailbox Temporary Disable Register */ +#define CAN0_EWR 0xffc02ab0 /* CAN Controller 0 Programmable Warning Level Register */ +#define CAN0_ESR 0xffc02ab4 /* CAN Controller 0 Error Status Register */ +#define CAN0_UCCNT 0xffc02ac4 /* CAN Controller 0 Universal Counter Register */ +#define CAN0_UCRC 0xffc02ac8 /* CAN Controller 0 Universal Counter Force Reload Register */ +#define CAN0_UCCNF 0xffc02acc /* CAN Controller 0 Universal Counter Configuration Register */ + +/* CAN Controller 0 Acceptance Registers */ + +#define CAN0_AM00L 0xffc02b00 /* CAN Controller 0 Mailbox 0 Acceptance Mask High Register */ +#define CAN0_AM00H 0xffc02b04 /* CAN Controller 0 Mailbox 0 Acceptance Mask Low Register */ +#define CAN0_AM01L 0xffc02b08 /* CAN Controller 0 Mailbox 1 Acceptance Mask High Register */ +#define CAN0_AM01H 0xffc02b0c /* CAN Controller 0 Mailbox 1 Acceptance Mask Low Register */ +#define CAN0_AM02L 0xffc02b10 /* CAN Controller 0 Mailbox 2 Acceptance Mask High Register */ +#define CAN0_AM02H 0xffc02b14 /* CAN Controller 0 Mailbox 2 Acceptance Mask Low Register */ +#define CAN0_AM03L 0xffc02b18 /* CAN Controller 0 Mailbox 3 Acceptance Mask High Register */ +#define CAN0_AM03H 0xffc02b1c /* CAN Controller 0 Mailbox 3 Acceptance Mask Low Register */ +#define CAN0_AM04L 0xffc02b20 /* CAN Controller 0 Mailbox 4 Acceptance Mask High Register */ +#define CAN0_AM04H 0xffc02b24 /* CAN Controller 0 Mailbox 4 Acceptance Mask Low Register */ +#define CAN0_AM05L 0xffc02b28 /* CAN Controller 0 Mailbox 5 Acceptance Mask High Register */ +#define CAN0_AM05H 0xffc02b2c /* CAN Controller 0 Mailbox 5 Acceptance Mask Low Register */ +#define CAN0_AM06L 0xffc02b30 /* CAN Controller 0 Mailbox 6 Acceptance Mask High Register */ +#define CAN0_AM06H 0xffc02b34 /* CAN Controller 0 Mailbox 6 Acceptance Mask Low Register */ +#define CAN0_AM07L 0xffc02b38 /* CAN Controller 0 Mailbox 7 Acceptance Mask High Register */ +#define CAN0_AM07H 0xffc02b3c /* CAN Controller 0 Mailbox 7 Acceptance Mask Low Register */ +#define CAN0_AM08L 0xffc02b40 /* CAN Controller 0 Mailbox 8 Acceptance Mask High Register */ +#define CAN0_AM08H 0xffc02b44 /* CAN Controller 0 Mailbox 8 Acceptance Mask Low Register */ +#define CAN0_AM09L 0xffc02b48 /* CAN Controller 0 Mailbox 9 Acceptance Mask High Register */ +#define CAN0_AM09H 0xffc02b4c /* CAN Controller 0 Mailbox 9 Acceptance Mask Low Register */ +#define CAN0_AM10L 0xffc02b50 /* CAN Controller 0 Mailbox 10 Acceptance Mask High Register */ +#define CAN0_AM10H 0xffc02b54 /* CAN Controller 0 Mailbox 10 Acceptance Mask Low Register */ +#define CAN0_AM11L 0xffc02b58 /* CAN Controller 0 Mailbox 11 Acceptance Mask High Register */ +#define CAN0_AM11H 0xffc02b5c /* CAN Controller 0 Mailbox 11 Acceptance Mask Low Register */ +#define CAN0_AM12L 0xffc02b60 /* CAN Controller 0 Mailbox 12 Acceptance Mask High Register */ +#define CAN0_AM12H 0xffc02b64 /* CAN Controller 0 Mailbox 12 Acceptance Mask Low Register */ +#define CAN0_AM13L 0xffc02b68 /* CAN Controller 0 Mailbox 13 Acceptance Mask High Register */ +#define CAN0_AM13H 0xffc02b6c /* CAN Controller 0 Mailbox 13 Acceptance Mask Low Register */ +#define CAN0_AM14L 0xffc02b70 /* CAN Controller 0 Mailbox 14 Acceptance Mask High Register */ +#define CAN0_AM14H 0xffc02b74 /* CAN Controller 0 Mailbox 14 Acceptance Mask Low Register */ +#define CAN0_AM15L 0xffc02b78 /* CAN Controller 0 Mailbox 15 Acceptance Mask High Register */ +#define CAN0_AM15H 0xffc02b7c /* CAN Controller 0 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 0 Acceptance Registers */ + +#define CAN0_AM16L 0xffc02b80 /* CAN Controller 0 Mailbox 16 Acceptance Mask High Register */ +#define CAN0_AM16H 0xffc02b84 /* CAN Controller 0 Mailbox 16 Acceptance Mask Low Register */ +#define CAN0_AM17L 0xffc02b88 /* CAN Controller 0 Mailbox 17 Acceptance Mask High Register */ +#define CAN0_AM17H 0xffc02b8c /* CAN Controller 0 Mailbox 17 Acceptance Mask Low Register */ +#define CAN0_AM18L 0xffc02b90 /* CAN Controller 0 Mailbox 18 Acceptance Mask High Register */ +#define CAN0_AM18H 0xffc02b94 /* CAN Controller 0 Mailbox 18 Acceptance Mask Low Register */ +#define CAN0_AM19L 0xffc02b98 /* CAN Controller 0 Mailbox 19 Acceptance Mask High Register */ +#define CAN0_AM19H 0xffc02b9c /* CAN Controller 0 Mailbox 19 Acceptance Mask Low Register */ +#define CAN0_AM20L 0xffc02ba0 /* CAN Controller 0 Mailbox 20 Acceptance Mask High Register */ +#define CAN0_AM20H 0xffc02ba4 /* CAN Controller 0 Mailbox 20 Acceptance Mask Low Register */ +#define CAN0_AM21L 0xffc02ba8 /* CAN Controller 0 Mailbox 21 Acceptance Mask High Register */ +#define CAN0_AM21H 0xffc02bac /* CAN Controller 0 Mailbox 21 Acceptance Mask Low Register */ +#define CAN0_AM22L 0xffc02bb0 /* CAN Controller 0 Mailbox 22 Acceptance Mask High Register */ +#define CAN0_AM22H 0xffc02bb4 /* CAN Controller 0 Mailbox 22 Acceptance Mask Low Register */ +#define CAN0_AM23L 0xffc02bb8 /* CAN Controller 0 Mailbox 23 Acceptance Mask High Register */ +#define CAN0_AM23H 0xffc02bbc /* CAN Controller 0 Mailbox 23 Acceptance Mask Low Register */ +#define CAN0_AM24L 0xffc02bc0 /* CAN Controller 0 Mailbox 24 Acceptance Mask High Register */ +#define CAN0_AM24H 0xffc02bc4 /* CAN Controller 0 Mailbox 24 Acceptance Mask Low Register */ +#define CAN0_AM25L 0xffc02bc8 /* CAN Controller 0 Mailbox 25 Acceptance Mask High Register */ +#define CAN0_AM25H 0xffc02bcc /* CAN Controller 0 Mailbox 25 Acceptance Mask Low Register */ +#define CAN0_AM26L 0xffc02bd0 /* CAN Controller 0 Mailbox 26 Acceptance Mask High Register */ +#define CAN0_AM26H 0xffc02bd4 /* CAN Controller 0 Mailbox 26 Acceptance Mask Low Register */ +#define CAN0_AM27L 0xffc02bd8 /* CAN Controller 0 Mailbox 27 Acceptance Mask High Register */ +#define CAN0_AM27H 0xffc02bdc /* CAN Controller 0 Mailbox 27 Acceptance Mask Low Register */ +#define CAN0_AM28L 0xffc02be0 /* CAN Controller 0 Mailbox 28 Acceptance Mask High Register */ +#define CAN0_AM28H 0xffc02be4 /* CAN Controller 0 Mailbox 28 Acceptance Mask Low Register */ +#define CAN0_AM29L 0xffc02be8 /* CAN Controller 0 Mailbox 29 Acceptance Mask High Register */ +#define CAN0_AM29H 0xffc02bec /* CAN Controller 0 Mailbox 29 Acceptance Mask Low Register */ +#define CAN0_AM30L 0xffc02bf0 /* CAN Controller 0 Mailbox 30 Acceptance Mask High Register */ +#define CAN0_AM30H 0xffc02bf4 /* CAN Controller 0 Mailbox 30 Acceptance Mask Low Register */ +#define CAN0_AM31L 0xffc02bf8 /* CAN Controller 0 Mailbox 31 Acceptance Mask High Register */ +#define CAN0_AM31H 0xffc02bfc /* CAN Controller 0 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 0 Mailbox Data Registers */ + +#define CAN0_MB00_DATA0 0xffc02c00 /* CAN Controller 0 Mailbox 0 Data 0 Register */ +#define CAN0_MB00_DATA1 0xffc02c04 /* CAN Controller 0 Mailbox 0 Data 1 Register */ +#define CAN0_MB00_DATA2 0xffc02c08 /* CAN Controller 0 Mailbox 0 Data 2 Register */ +#define CAN0_MB00_DATA3 0xffc02c0c /* CAN Controller 0 Mailbox 0 Data 3 Register */ +#define CAN0_MB00_LENGTH 0xffc02c10 /* CAN Controller 0 Mailbox 0 Length Register */ +#define CAN0_MB00_TIMESTAMP 0xffc02c14 /* CAN Controller 0 Mailbox 0 Timestamp Register */ +#define CAN0_MB00_ID0 0xffc02c18 /* CAN Controller 0 Mailbox 0 ID0 Register */ +#define CAN0_MB00_ID1 0xffc02c1c /* CAN Controller 0 Mailbox 0 ID1 Register */ +#define CAN0_MB01_DATA0 0xffc02c20 /* CAN Controller 0 Mailbox 1 Data 0 Register */ +#define CAN0_MB01_DATA1 0xffc02c24 /* CAN Controller 0 Mailbox 1 Data 1 Register */ +#define CAN0_MB01_DATA2 0xffc02c28 /* CAN Controller 0 Mailbox 1 Data 2 Register */ +#define CAN0_MB01_DATA3 0xffc02c2c /* CAN Controller 0 Mailbox 1 Data 3 Register */ +#define CAN0_MB01_LENGTH 0xffc02c30 /* CAN Controller 0 Mailbox 1 Length Register */ +#define CAN0_MB01_TIMESTAMP 0xffc02c34 /* CAN Controller 0 Mailbox 1 Timestamp Register */ +#define CAN0_MB01_ID0 0xffc02c38 /* CAN Controller 0 Mailbox 1 ID0 Register */ +#define CAN0_MB01_ID1 0xffc02c3c /* CAN Controller 0 Mailbox 1 ID1 Register */ +#define CAN0_MB02_DATA0 0xffc02c40 /* CAN Controller 0 Mailbox 2 Data 0 Register */ +#define CAN0_MB02_DATA1 0xffc02c44 /* CAN Controller 0 Mailbox 2 Data 1 Register */ +#define CAN0_MB02_DATA2 0xffc02c48 /* CAN Controller 0 Mailbox 2 Data 2 Register */ +#define CAN0_MB02_DATA3 0xffc02c4c /* CAN Controller 0 Mailbox 2 Data 3 Register */ +#define CAN0_MB02_LENGTH 0xffc02c50 /* CAN Controller 0 Mailbox 2 Length Register */ +#define CAN0_MB02_TIMESTAMP 0xffc02c54 /* CAN Controller 0 Mailbox 2 Timestamp Register */ +#define CAN0_MB02_ID0 0xffc02c58 /* CAN Controller 0 Mailbox 2 ID0 Register */ +#define CAN0_MB02_ID1 0xffc02c5c /* CAN Controller 0 Mailbox 2 ID1 Register */ +#define CAN0_MB03_DATA0 0xffc02c60 /* CAN Controller 0 Mailbox 3 Data 0 Register */ +#define CAN0_MB03_DATA1 0xffc02c64 /* CAN Controller 0 Mailbox 3 Data 1 Register */ +#define CAN0_MB03_DATA2 0xffc02c68 /* CAN Controller 0 Mailbox 3 Data 2 Register */ +#define CAN0_MB03_DATA3 0xffc02c6c /* CAN Controller 0 Mailbox 3 Data 3 Register */ +#define CAN0_MB03_LENGTH 0xffc02c70 /* CAN Controller 0 Mailbox 3 Length Register */ +#define CAN0_MB03_TIMESTAMP 0xffc02c74 /* CAN Controller 0 Mailbox 3 Timestamp Register */ +#define CAN0_MB03_ID0 0xffc02c78 /* CAN Controller 0 Mailbox 3 ID0 Register */ +#define CAN0_MB03_ID1 0xffc02c7c /* CAN Controller 0 Mailbox 3 ID1 Register */ +#define CAN0_MB04_DATA0 0xffc02c80 /* CAN Controller 0 Mailbox 4 Data 0 Register */ +#define CAN0_MB04_DATA1 0xffc02c84 /* CAN Controller 0 Mailbox 4 Data 1 Register */ +#define CAN0_MB04_DATA2 0xffc02c88 /* CAN Controller 0 Mailbox 4 Data 2 Register */ +#define CAN0_MB04_DATA3 0xffc02c8c /* CAN Controller 0 Mailbox 4 Data 3 Register */ +#define CAN0_MB04_LENGTH 0xffc02c90 /* CAN Controller 0 Mailbox 4 Length Register */ +#define CAN0_MB04_TIMESTAMP 0xffc02c94 /* CAN Controller 0 Mailbox 4 Timestamp Register */ +#define CAN0_MB04_ID0 0xffc02c98 /* CAN Controller 0 Mailbox 4 ID0 Register */ +#define CAN0_MB04_ID1 0xffc02c9c /* CAN Controller 0 Mailbox 4 ID1 Register */ +#define CAN0_MB05_DATA0 0xffc02ca0 /* CAN Controller 0 Mailbox 5 Data 0 Register */ +#define CAN0_MB05_DATA1 0xffc02ca4 /* CAN Controller 0 Mailbox 5 Data 1 Register */ +#define CAN0_MB05_DATA2 0xffc02ca8 /* CAN Controller 0 Mailbox 5 Data 2 Register */ +#define CAN0_MB05_DATA3 0xffc02cac /* CAN Controller 0 Mailbox 5 Data 3 Register */ +#define CAN0_MB05_LENGTH 0xffc02cb0 /* CAN Controller 0 Mailbox 5 Length Register */ +#define CAN0_MB05_TIMESTAMP 0xffc02cb4 /* CAN Controller 0 Mailbox 5 Timestamp Register */ +#define CAN0_MB05_ID0 0xffc02cb8 /* CAN Controller 0 Mailbox 5 ID0 Register */ +#define CAN0_MB05_ID1 0xffc02cbc /* CAN Controller 0 Mailbox 5 ID1 Register */ +#define CAN0_MB06_DATA0 0xffc02cc0 /* CAN Controller 0 Mailbox 6 Data 0 Register */ +#define CAN0_MB06_DATA1 0xffc02cc4 /* CAN Controller 0 Mailbox 6 Data 1 Register */ +#define CAN0_MB06_DATA2 0xffc02cc8 /* CAN Controller 0 Mailbox 6 Data 2 Register */ +#define CAN0_MB06_DATA3 0xffc02ccc /* CAN Controller 0 Mailbox 6 Data 3 Register */ +#define CAN0_MB06_LENGTH 0xffc02cd0 /* CAN Controller 0 Mailbox 6 Length Register */ +#define CAN0_MB06_TIMESTAMP 0xffc02cd4 /* CAN Controller 0 Mailbox 6 Timestamp Register */ +#define CAN0_MB06_ID0 0xffc02cd8 /* CAN Controller 0 Mailbox 6 ID0 Register */ +#define CAN0_MB06_ID1 0xffc02cdc /* CAN Controller 0 Mailbox 6 ID1 Register */ +#define CAN0_MB07_DATA0 0xffc02ce0 /* CAN Controller 0 Mailbox 7 Data 0 Register */ +#define CAN0_MB07_DATA1 0xffc02ce4 /* CAN Controller 0 Mailbox 7 Data 1 Register */ +#define CAN0_MB07_DATA2 0xffc02ce8 /* CAN Controller 0 Mailbox 7 Data 2 Register */ +#define CAN0_MB07_DATA3 0xffc02cec /* CAN Controller 0 Mailbox 7 Data 3 Register */ +#define CAN0_MB07_LENGTH 0xffc02cf0 /* CAN Controller 0 Mailbox 7 Length Register */ +#define CAN0_MB07_TIMESTAMP 0xffc02cf4 /* CAN Controller 0 Mailbox 7 Timestamp Register */ +#define CAN0_MB07_ID0 0xffc02cf8 /* CAN Controller 0 Mailbox 7 ID0 Register */ +#define CAN0_MB07_ID1 0xffc02cfc /* CAN Controller 0 Mailbox 7 ID1 Register */ +#define CAN0_MB08_DATA0 0xffc02d00 /* CAN Controller 0 Mailbox 8 Data 0 Register */ +#define CAN0_MB08_DATA1 0xffc02d04 /* CAN Controller 0 Mailbox 8 Data 1 Register */ +#define CAN0_MB08_DATA2 0xffc02d08 /* CAN Controller 0 Mailbox 8 Data 2 Register */ +#define CAN0_MB08_DATA3 0xffc02d0c /* CAN Controller 0 Mailbox 8 Data 3 Register */ +#define CAN0_MB08_LENGTH 0xffc02d10 /* CAN Controller 0 Mailbox 8 Length Register */ +#define CAN0_MB08_TIMESTAMP 0xffc02d14 /* CAN Controller 0 Mailbox 8 Timestamp Register */ +#define CAN0_MB08_ID0 0xffc02d18 /* CAN Controller 0 Mailbox 8 ID0 Register */ +#define CAN0_MB08_ID1 0xffc02d1c /* CAN Controller 0 Mailbox 8 ID1 Register */ +#define CAN0_MB09_DATA0 0xffc02d20 /* CAN Controller 0 Mailbox 9 Data 0 Register */ +#define CAN0_MB09_DATA1 0xffc02d24 /* CAN Controller 0 Mailbox 9 Data 1 Register */ +#define CAN0_MB09_DATA2 0xffc02d28 /* CAN Controller 0 Mailbox 9 Data 2 Register */ +#define CAN0_MB09_DATA3 0xffc02d2c /* CAN Controller 0 Mailbox 9 Data 3 Register */ +#define CAN0_MB09_LENGTH 0xffc02d30 /* CAN Controller 0 Mailbox 9 Length Register */ +#define CAN0_MB09_TIMESTAMP 0xffc02d34 /* CAN Controller 0 Mailbox 9 Timestamp Register */ +#define CAN0_MB09_ID0 0xffc02d38 /* CAN Controller 0 Mailbox 9 ID0 Register */ +#define CAN0_MB09_ID1 0xffc02d3c /* CAN Controller 0 Mailbox 9 ID1 Register */ +#define CAN0_MB10_DATA0 0xffc02d40 /* CAN Controller 0 Mailbox 10 Data 0 Register */ +#define CAN0_MB10_DATA1 0xffc02d44 /* CAN Controller 0 Mailbox 10 Data 1 Register */ +#define CAN0_MB10_DATA2 0xffc02d48 /* CAN Controller 0 Mailbox 10 Data 2 Register */ +#define CAN0_MB10_DATA3 0xffc02d4c /* CAN Controller 0 Mailbox 10 Data 3 Register */ +#define CAN0_MB10_LENGTH 0xffc02d50 /* CAN Controller 0 Mailbox 10 Length Register */ +#define CAN0_MB10_TIMESTAMP 0xffc02d54 /* CAN Controller 0 Mailbox 10 Timestamp Register */ +#define CAN0_MB10_ID0 0xffc02d58 /* CAN Controller 0 Mailbox 10 ID0 Register */ +#define CAN0_MB10_ID1 0xffc02d5c /* CAN Controller 0 Mailbox 10 ID1 Register */ +#define CAN0_MB11_DATA0 0xffc02d60 /* CAN Controller 0 Mailbox 11 Data 0 Register */ +#define CAN0_MB11_DATA1 0xffc02d64 /* CAN Controller 0 Mailbox 11 Data 1 Register */ +#define CAN0_MB11_DATA2 0xffc02d68 /* CAN Controller 0 Mailbox 11 Data 2 Register */ +#define CAN0_MB11_DATA3 0xffc02d6c /* CAN Controller 0 Mailbox 11 Data 3 Register */ +#define CAN0_MB11_LENGTH 0xffc02d70 /* CAN Controller 0 Mailbox 11 Length Register */ +#define CAN0_MB11_TIMESTAMP 0xffc02d74 /* CAN Controller 0 Mailbox 11 Timestamp Register */ +#define CAN0_MB11_ID0 0xffc02d78 /* CAN Controller 0 Mailbox 11 ID0 Register */ +#define CAN0_MB11_ID1 0xffc02d7c /* CAN Controller 0 Mailbox 11 ID1 Register */ +#define CAN0_MB12_DATA0 0xffc02d80 /* CAN Controller 0 Mailbox 12 Data 0 Register */ +#define CAN0_MB12_DATA1 0xffc02d84 /* CAN Controller 0 Mailbox 12 Data 1 Register */ +#define CAN0_MB12_DATA2 0xffc02d88 /* CAN Controller 0 Mailbox 12 Data 2 Register */ +#define CAN0_MB12_DATA3 0xffc02d8c /* CAN Controller 0 Mailbox 12 Data 3 Register */ +#define CAN0_MB12_LENGTH 0xffc02d90 /* CAN Controller 0 Mailbox 12 Length Register */ +#define CAN0_MB12_TIMESTAMP 0xffc02d94 /* CAN Controller 0 Mailbox 12 Timestamp Register */ +#define CAN0_MB12_ID0 0xffc02d98 /* CAN Controller 0 Mailbox 12 ID0 Register */ +#define CAN0_MB12_ID1 0xffc02d9c /* CAN Controller 0 Mailbox 12 ID1 Register */ +#define CAN0_MB13_DATA0 0xffc02da0 /* CAN Controller 0 Mailbox 13 Data 0 Register */ +#define CAN0_MB13_DATA1 0xffc02da4 /* CAN Controller 0 Mailbox 13 Data 1 Register */ +#define CAN0_MB13_DATA2 0xffc02da8 /* CAN Controller 0 Mailbox 13 Data 2 Register */ +#define CAN0_MB13_DATA3 0xffc02dac /* CAN Controller 0 Mailbox 13 Data 3 Register */ +#define CAN0_MB13_LENGTH 0xffc02db0 /* CAN Controller 0 Mailbox 13 Length Register */ +#define CAN0_MB13_TIMESTAMP 0xffc02db4 /* CAN Controller 0 Mailbox 13 Timestamp Register */ +#define CAN0_MB13_ID0 0xffc02db8 /* CAN Controller 0 Mailbox 13 ID0 Register */ +#define CAN0_MB13_ID1 0xffc02dbc /* CAN Controller 0 Mailbox 13 ID1 Register */ +#define CAN0_MB14_DATA0 0xffc02dc0 /* CAN Controller 0 Mailbox 14 Data 0 Register */ +#define CAN0_MB14_DATA1 0xffc02dc4 /* CAN Controller 0 Mailbox 14 Data 1 Register */ +#define CAN0_MB14_DATA2 0xffc02dc8 /* CAN Controller 0 Mailbox 14 Data 2 Register */ +#define CAN0_MB14_DATA3 0xffc02dcc /* CAN Controller 0 Mailbox 14 Data 3 Register */ +#define CAN0_MB14_LENGTH 0xffc02dd0 /* CAN Controller 0 Mailbox 14 Length Register */ +#define CAN0_MB14_TIMESTAMP 0xffc02dd4 /* CAN Controller 0 Mailbox 14 Timestamp Register */ +#define CAN0_MB14_ID0 0xffc02dd8 /* CAN Controller 0 Mailbox 14 ID0 Register */ +#define CAN0_MB14_ID1 0xffc02ddc /* CAN Controller 0 Mailbox 14 ID1 Register */ +#define CAN0_MB15_DATA0 0xffc02de0 /* CAN Controller 0 Mailbox 15 Data 0 Register */ +#define CAN0_MB15_DATA1 0xffc02de4 /* CAN Controller 0 Mailbox 15 Data 1 Register */ +#define CAN0_MB15_DATA2 0xffc02de8 /* CAN Controller 0 Mailbox 15 Data 2 Register */ +#define CAN0_MB15_DATA3 0xffc02dec /* CAN Controller 0 Mailbox 15 Data 3 Register */ +#define CAN0_MB15_LENGTH 0xffc02df0 /* CAN Controller 0 Mailbox 15 Length Register */ +#define CAN0_MB15_TIMESTAMP 0xffc02df4 /* CAN Controller 0 Mailbox 15 Timestamp Register */ +#define CAN0_MB15_ID0 0xffc02df8 /* CAN Controller 0 Mailbox 15 ID0 Register */ +#define CAN0_MB15_ID1 0xffc02dfc /* CAN Controller 0 Mailbox 15 ID1 Register */ + +/* CAN Controller 0 Mailbox Data Registers */ + +#define CAN0_MB16_DATA0 0xffc02e00 /* CAN Controller 0 Mailbox 16 Data 0 Register */ +#define CAN0_MB16_DATA1 0xffc02e04 /* CAN Controller 0 Mailbox 16 Data 1 Register */ +#define CAN0_MB16_DATA2 0xffc02e08 /* CAN Controller 0 Mailbox 16 Data 2 Register */ +#define CAN0_MB16_DATA3 0xffc02e0c /* CAN Controller 0 Mailbox 16 Data 3 Register */ +#define CAN0_MB16_LENGTH 0xffc02e10 /* CAN Controller 0 Mailbox 16 Length Register */ +#define CAN0_MB16_TIMESTAMP 0xffc02e14 /* CAN Controller 0 Mailbox 16 Timestamp Register */ +#define CAN0_MB16_ID0 0xffc02e18 /* CAN Controller 0 Mailbox 16 ID0 Register */ +#define CAN0_MB16_ID1 0xffc02e1c /* CAN Controller 0 Mailbox 16 ID1 Register */ +#define CAN0_MB17_DATA0 0xffc02e20 /* CAN Controller 0 Mailbox 17 Data 0 Register */ +#define CAN0_MB17_DATA1 0xffc02e24 /* CAN Controller 0 Mailbox 17 Data 1 Register */ +#define CAN0_MB17_DATA2 0xffc02e28 /* CAN Controller 0 Mailbox 17 Data 2 Register */ +#define CAN0_MB17_DATA3 0xffc02e2c /* CAN Controller 0 Mailbox 17 Data 3 Register */ +#define CAN0_MB17_LENGTH 0xffc02e30 /* CAN Controller 0 Mailbox 17 Length Register */ +#define CAN0_MB17_TIMESTAMP 0xffc02e34 /* CAN Controller 0 Mailbox 17 Timestamp Register */ +#define CAN0_MB17_ID0 0xffc02e38 /* CAN Controller 0 Mailbox 17 ID0 Register */ +#define CAN0_MB17_ID1 0xffc02e3c /* CAN Controller 0 Mailbox 17 ID1 Register */ +#define CAN0_MB18_DATA0 0xffc02e40 /* CAN Controller 0 Mailbox 18 Data 0 Register */ +#define CAN0_MB18_DATA1 0xffc02e44 /* CAN Controller 0 Mailbox 18 Data 1 Register */ +#define CAN0_MB18_DATA2 0xffc02e48 /* CAN Controller 0 Mailbox 18 Data 2 Register */ +#define CAN0_MB18_DATA3 0xffc02e4c /* CAN Controller 0 Mailbox 18 Data 3 Register */ +#define CAN0_MB18_LENGTH 0xffc02e50 /* CAN Controller 0 Mailbox 18 Length Register */ +#define CAN0_MB18_TIMESTAMP 0xffc02e54 /* CAN Controller 0 Mailbox 18 Timestamp Register */ +#define CAN0_MB18_ID0 0xffc02e58 /* CAN Controller 0 Mailbox 18 ID0 Register */ +#define CAN0_MB18_ID1 0xffc02e5c /* CAN Controller 0 Mailbox 18 ID1 Register */ +#define CAN0_MB19_DATA0 0xffc02e60 /* CAN Controller 0 Mailbox 19 Data 0 Register */ +#define CAN0_MB19_DATA1 0xffc02e64 /* CAN Controller 0 Mailbox 19 Data 1 Register */ +#define CAN0_MB19_DATA2 0xffc02e68 /* CAN Controller 0 Mailbox 19 Data 2 Register */ +#define CAN0_MB19_DATA3 0xffc02e6c /* CAN Controller 0 Mailbox 19 Data 3 Register */ +#define CAN0_MB19_LENGTH 0xffc02e70 /* CAN Controller 0 Mailbox 19 Length Register */ +#define CAN0_MB19_TIMESTAMP 0xffc02e74 /* CAN Controller 0 Mailbox 19 Timestamp Register */ +#define CAN0_MB19_ID0 0xffc02e78 /* CAN Controller 0 Mailbox 19 ID0 Register */ +#define CAN0_MB19_ID1 0xffc02e7c /* CAN Controller 0 Mailbox 19 ID1 Register */ +#define CAN0_MB20_DATA0 0xffc02e80 /* CAN Controller 0 Mailbox 20 Data 0 Register */ +#define CAN0_MB20_DATA1 0xffc02e84 /* CAN Controller 0 Mailbox 20 Data 1 Register */ +#define CAN0_MB20_DATA2 0xffc02e88 /* CAN Controller 0 Mailbox 20 Data 2 Register */ +#define CAN0_MB20_DATA3 0xffc02e8c /* CAN Controller 0 Mailbox 20 Data 3 Register */ +#define CAN0_MB20_LENGTH 0xffc02e90 /* CAN Controller 0 Mailbox 20 Length Register */ +#define CAN0_MB20_TIMESTAMP 0xffc02e94 /* CAN Controller 0 Mailbox 20 Timestamp Register */ +#define CAN0_MB20_ID0 0xffc02e98 /* CAN Controller 0 Mailbox 20 ID0 Register */ +#define CAN0_MB20_ID1 0xffc02e9c /* CAN Controller 0 Mailbox 20 ID1 Register */ +#define CAN0_MB21_DATA0 0xffc02ea0 /* CAN Controller 0 Mailbox 21 Data 0 Register */ +#define CAN0_MB21_DATA1 0xffc02ea4 /* CAN Controller 0 Mailbox 21 Data 1 Register */ +#define CAN0_MB21_DATA2 0xffc02ea8 /* CAN Controller 0 Mailbox 21 Data 2 Register */ +#define CAN0_MB21_DATA3 0xffc02eac /* CAN Controller 0 Mailbox 21 Data 3 Register */ +#define CAN0_MB21_LENGTH 0xffc02eb0 /* CAN Controller 0 Mailbox 21 Length Register */ +#define CAN0_MB21_TIMESTAMP 0xffc02eb4 /* CAN Controller 0 Mailbox 21 Timestamp Register */ +#define CAN0_MB21_ID0 0xffc02eb8 /* CAN Controller 0 Mailbox 21 ID0 Register */ +#define CAN0_MB21_ID1 0xffc02ebc /* CAN Controller 0 Mailbox 21 ID1 Register */ +#define CAN0_MB22_DATA0 0xffc02ec0 /* CAN Controller 0 Mailbox 22 Data 0 Register */ +#define CAN0_MB22_DATA1 0xffc02ec4 /* CAN Controller 0 Mailbox 22 Data 1 Register */ +#define CAN0_MB22_DATA2 0xffc02ec8 /* CAN Controller 0 Mailbox 22 Data 2 Register */ +#define CAN0_MB22_DATA3 0xffc02ecc /* CAN Controller 0 Mailbox 22 Data 3 Register */ +#define CAN0_MB22_LENGTH 0xffc02ed0 /* CAN Controller 0 Mailbox 22 Length Register */ +#define CAN0_MB22_TIMESTAMP 0xffc02ed4 /* CAN Controller 0 Mailbox 22 Timestamp Register */ +#define CAN0_MB22_ID0 0xffc02ed8 /* CAN Controller 0 Mailbox 22 ID0 Register */ +#define CAN0_MB22_ID1 0xffc02edc /* CAN Controller 0 Mailbox 22 ID1 Register */ +#define CAN0_MB23_DATA0 0xffc02ee0 /* CAN Controller 0 Mailbox 23 Data 0 Register */ +#define CAN0_MB23_DATA1 0xffc02ee4 /* CAN Controller 0 Mailbox 23 Data 1 Register */ +#define CAN0_MB23_DATA2 0xffc02ee8 /* CAN Controller 0 Mailbox 23 Data 2 Register */ +#define CAN0_MB23_DATA3 0xffc02eec /* CAN Controller 0 Mailbox 23 Data 3 Register */ +#define CAN0_MB23_LENGTH 0xffc02ef0 /* CAN Controller 0 Mailbox 23 Length Register */ +#define CAN0_MB23_TIMESTAMP 0xffc02ef4 /* CAN Controller 0 Mailbox 23 Timestamp Register */ +#define CAN0_MB23_ID0 0xffc02ef8 /* CAN Controller 0 Mailbox 23 ID0 Register */ +#define CAN0_MB23_ID1 0xffc02efc /* CAN Controller 0 Mailbox 23 ID1 Register */ +#define CAN0_MB24_DATA0 0xffc02f00 /* CAN Controller 0 Mailbox 24 Data 0 Register */ +#define CAN0_MB24_DATA1 0xffc02f04 /* CAN Controller 0 Mailbox 24 Data 1 Register */ +#define CAN0_MB24_DATA2 0xffc02f08 /* CAN Controller 0 Mailbox 24 Data 2 Register */ +#define CAN0_MB24_DATA3 0xffc02f0c /* CAN Controller 0 Mailbox 24 Data 3 Register */ +#define CAN0_MB24_LENGTH 0xffc02f10 /* CAN Controller 0 Mailbox 24 Length Register */ +#define CAN0_MB24_TIMESTAMP 0xffc02f14 /* CAN Controller 0 Mailbox 24 Timestamp Register */ +#define CAN0_MB24_ID0 0xffc02f18 /* CAN Controller 0 Mailbox 24 ID0 Register */ +#define CAN0_MB24_ID1 0xffc02f1c /* CAN Controller 0 Mailbox 24 ID1 Register */ +#define CAN0_MB25_DATA0 0xffc02f20 /* CAN Controller 0 Mailbox 25 Data 0 Register */ +#define CAN0_MB25_DATA1 0xffc02f24 /* CAN Controller 0 Mailbox 25 Data 1 Register */ +#define CAN0_MB25_DATA2 0xffc02f28 /* CAN Controller 0 Mailbox 25 Data 2 Register */ +#define CAN0_MB25_DATA3 0xffc02f2c /* CAN Controller 0 Mailbox 25 Data 3 Register */ +#define CAN0_MB25_LENGTH 0xffc02f30 /* CAN Controller 0 Mailbox 25 Length Register */ +#define CAN0_MB25_TIMESTAMP 0xffc02f34 /* CAN Controller 0 Mailbox 25 Timestamp Register */ +#define CAN0_MB25_ID0 0xffc02f38 /* CAN Controller 0 Mailbox 25 ID0 Register */ +#define CAN0_MB25_ID1 0xffc02f3c /* CAN Controller 0 Mailbox 25 ID1 Register */ +#define CAN0_MB26_DATA0 0xffc02f40 /* CAN Controller 0 Mailbox 26 Data 0 Register */ +#define CAN0_MB26_DATA1 0xffc02f44 /* CAN Controller 0 Mailbox 26 Data 1 Register */ +#define CAN0_MB26_DATA2 0xffc02f48 /* CAN Controller 0 Mailbox 26 Data 2 Register */ +#define CAN0_MB26_DATA3 0xffc02f4c /* CAN Controller 0 Mailbox 26 Data 3 Register */ +#define CAN0_MB26_LENGTH 0xffc02f50 /* CAN Controller 0 Mailbox 26 Length Register */ +#define CAN0_MB26_TIMESTAMP 0xffc02f54 /* CAN Controller 0 Mailbox 26 Timestamp Register */ +#define CAN0_MB26_ID0 0xffc02f58 /* CAN Controller 0 Mailbox 26 ID0 Register */ +#define CAN0_MB26_ID1 0xffc02f5c /* CAN Controller 0 Mailbox 26 ID1 Register */ +#define CAN0_MB27_DATA0 0xffc02f60 /* CAN Controller 0 Mailbox 27 Data 0 Register */ +#define CAN0_MB27_DATA1 0xffc02f64 /* CAN Controller 0 Mailbox 27 Data 1 Register */ +#define CAN0_MB27_DATA2 0xffc02f68 /* CAN Controller 0 Mailbox 27 Data 2 Register */ +#define CAN0_MB27_DATA3 0xffc02f6c /* CAN Controller 0 Mailbox 27 Data 3 Register */ +#define CAN0_MB27_LENGTH 0xffc02f70 /* CAN Controller 0 Mailbox 27 Length Register */ +#define CAN0_MB27_TIMESTAMP 0xffc02f74 /* CAN Controller 0 Mailbox 27 Timestamp Register */ +#define CAN0_MB27_ID0 0xffc02f78 /* CAN Controller 0 Mailbox 27 ID0 Register */ +#define CAN0_MB27_ID1 0xffc02f7c /* CAN Controller 0 Mailbox 27 ID1 Register */ +#define CAN0_MB28_DATA0 0xffc02f80 /* CAN Controller 0 Mailbox 28 Data 0 Register */ +#define CAN0_MB28_DATA1 0xffc02f84 /* CAN Controller 0 Mailbox 28 Data 1 Register */ +#define CAN0_MB28_DATA2 0xffc02f88 /* CAN Controller 0 Mailbox 28 Data 2 Register */ +#define CAN0_MB28_DATA3 0xffc02f8c /* CAN Controller 0 Mailbox 28 Data 3 Register */ +#define CAN0_MB28_LENGTH 0xffc02f90 /* CAN Controller 0 Mailbox 28 Length Register */ +#define CAN0_MB28_TIMESTAMP 0xffc02f94 /* CAN Controller 0 Mailbox 28 Timestamp Register */ +#define CAN0_MB28_ID0 0xffc02f98 /* CAN Controller 0 Mailbox 28 ID0 Register */ +#define CAN0_MB28_ID1 0xffc02f9c /* CAN Controller 0 Mailbox 28 ID1 Register */ +#define CAN0_MB29_DATA0 0xffc02fa0 /* CAN Controller 0 Mailbox 29 Data 0 Register */ +#define CAN0_MB29_DATA1 0xffc02fa4 /* CAN Controller 0 Mailbox 29 Data 1 Register */ +#define CAN0_MB29_DATA2 0xffc02fa8 /* CAN Controller 0 Mailbox 29 Data 2 Register */ +#define CAN0_MB29_DATA3 0xffc02fac /* CAN Controller 0 Mailbox 29 Data 3 Register */ +#define CAN0_MB29_LENGTH 0xffc02fb0 /* CAN Controller 0 Mailbox 29 Length Register */ +#define CAN0_MB29_TIMESTAMP 0xffc02fb4 /* CAN Controller 0 Mailbox 29 Timestamp Register */ +#define CAN0_MB29_ID0 0xffc02fb8 /* CAN Controller 0 Mailbox 29 ID0 Register */ +#define CAN0_MB29_ID1 0xffc02fbc /* CAN Controller 0 Mailbox 29 ID1 Register */ +#define CAN0_MB30_DATA0 0xffc02fc0 /* CAN Controller 0 Mailbox 30 Data 0 Register */ +#define CAN0_MB30_DATA1 0xffc02fc4 /* CAN Controller 0 Mailbox 30 Data 1 Register */ +#define CAN0_MB30_DATA2 0xffc02fc8 /* CAN Controller 0 Mailbox 30 Data 2 Register */ +#define CAN0_MB30_DATA3 0xffc02fcc /* CAN Controller 0 Mailbox 30 Data 3 Register */ +#define CAN0_MB30_LENGTH 0xffc02fd0 /* CAN Controller 0 Mailbox 30 Length Register */ +#define CAN0_MB30_TIMESTAMP 0xffc02fd4 /* CAN Controller 0 Mailbox 30 Timestamp Register */ +#define CAN0_MB30_ID0 0xffc02fd8 /* CAN Controller 0 Mailbox 30 ID0 Register */ +#define CAN0_MB30_ID1 0xffc02fdc /* CAN Controller 0 Mailbox 30 ID1 Register */ +#define CAN0_MB31_DATA0 0xffc02fe0 /* CAN Controller 0 Mailbox 31 Data 0 Register */ +#define CAN0_MB31_DATA1 0xffc02fe4 /* CAN Controller 0 Mailbox 31 Data 1 Register */ +#define CAN0_MB31_DATA2 0xffc02fe8 /* CAN Controller 0 Mailbox 31 Data 2 Register */ +#define CAN0_MB31_DATA3 0xffc02fec /* CAN Controller 0 Mailbox 31 Data 3 Register */ +#define CAN0_MB31_LENGTH 0xffc02ff0 /* CAN Controller 0 Mailbox 31 Length Register */ +#define CAN0_MB31_TIMESTAMP 0xffc02ff4 /* CAN Controller 0 Mailbox 31 Timestamp Register */ +#define CAN0_MB31_ID0 0xffc02ff8 /* CAN Controller 0 Mailbox 31 ID0 Register */ +#define CAN0_MB31_ID1 0xffc02ffc /* CAN Controller 0 Mailbox 31 ID1 Register */ + +/* UART3 Registers */ + +#define UART3_DLL 0xffc03100 /* Divisor Latch Low Byte */ +#define UART3_DLH 0xffc03104 /* Divisor Latch High Byte */ +#define UART3_GCTL 0xffc03108 /* Global Control Register */ +#define UART3_LCR 0xffc0310c /* Line Control Register */ +#define UART3_MCR 0xffc03110 /* Modem Control Register */ +#define UART3_LSR 0xffc03114 /* Line Status Register */ +#define UART3_MSR 0xffc03118 /* Modem Status Register */ +#define UART3_SCR 0xffc0311c /* Scratch Register */ +#define UART3_IER_SET 0xffc03120 /* Interrupt Enable Register Set */ +#define UART3_IER_CLEAR 0xffc03124 /* Interrupt Enable Register Clear */ +#define UART3_THR 0xffc03128 /* Transmit Hold Register */ +#define UART3_RBR 0xffc0312c /* Receive Buffer Register */ + +/* NFC Registers */ + +#define NFC_CTL 0xffc03b00 /* NAND Control Register */ +#define NFC_STAT 0xffc03b04 /* NAND Status Register */ +#define NFC_IRQSTAT 0xffc03b08 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xffc03b0c /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xffc03b10 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xffc03b14 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xffc03b18 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xffc03b1c /* NAND ECC Register 3 */ +#define NFC_COUNT 0xffc03b20 /* NAND ECC Count Register */ +#define NFC_RST 0xffc03b24 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xffc03b28 /* NAND Page Control Register */ +#define NFC_READ 0xffc03b2c /* NAND Read Data Register */ +#define NFC_ADDR 0xffc03b40 /* NAND Address Register */ +#define NFC_CMD 0xffc03b44 /* NAND Command Register */ +#define NFC_DATA_WR 0xffc03b48 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xffc03b4c /* NAND Data Read Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc04200 /* Configuration Register */ +#define CNT_IMASK 0xffc04204 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc04208 /* Status Register */ +#define CNT_COMMAND 0xffc0420c /* Command Register */ +#define CNT_DEBOUNCE 0xffc04210 /* Debounce Register */ +#define CNT_COUNTER 0xffc04214 /* Counter Register */ +#define CNT_MAX 0xffc04218 /* Maximal Count Register */ +#define CNT_MIN 0xffc0421c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc04300 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc04304 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc04308 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0430c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc04320 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc04324 /* Secure Control */ +#define SECURE_STATUS 0xffc04328 /* Secure Status */ + +/* DMA Peripheral Mux Register */ + +#define DMAC1_PERIMUX 0xffc04340 /* DMA Controller 1 Peripheral Multiplexer Register */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc04380 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc04384 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc04388 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0438c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 processor */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* Bit masks for SIC_IAR0 */ + +#define PLL_WAKEUP 0x1 /* PLL Wakeup */ + +/* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */ + +#define DMA0_ERR 0x2 /* DMA Controller 0 Error */ +#define EPPI0_ERR 0x4 /* EPPI0 Error */ +#define SPORT0_ERR 0x8 /* SPORT0 Error */ +#define SPORT1_ERR 0x10 /* SPORT1 Error */ +#define SPI0_ERR 0x20 /* SPI0 Error */ +#define UART0_ERR 0x40 /* UART0 Error */ +#define RTC 0x80 /* Real-Time Clock */ +#define DMA12 0x100 /* DMA Channel 12 */ +#define DMA0 0x200 /* DMA Channel 0 */ +#define DMA1 0x400 /* DMA Channel 1 */ +#define DMA2 0x800 /* DMA Channel 2 */ +#define DMA3 0x1000 /* DMA Channel 3 */ +#define DMA4 0x2000 /* DMA Channel 4 */ +#define DMA6 0x4000 /* DMA Channel 6 */ +#define DMA7 0x8000 /* DMA Channel 7 */ +#define PINT0 0x80000 /* Pin Interrupt 0 */ +#define PINT1 0x100000 /* Pin Interrupt 1 */ +#define MDMA0 0x200000 /* Memory DMA Stream 0 */ +#define MDMA1 0x400000 /* Memory DMA Stream 1 */ +#define WDOG 0x800000 /* Watchdog Timer */ +#define DMA1_ERR 0x1000000 /* DMA Controller 1 Error */ +#define SPORT2_ERR 0x2000000 /* SPORT2 Error */ +#define SPORT3_ERR 0x4000000 /* SPORT3 Error */ +#define MXVR_SD 0x8000000 /* MXVR Synchronous Data */ +#define SPI1_ERR 0x10000000 /* SPI1 Error */ +#define SPI2_ERR 0x20000000 /* SPI2 Error */ +#define UART1_ERR 0x40000000 /* UART1 Error */ +#define UART2_ERR 0x80000000 /* UART2 Error */ + +/* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */ + +#define CAN0_ERR 0x1 /* CAN0 Error */ +#define DMA18 0x2 /* DMA Channel 18 */ +#define DMA19 0x4 /* DMA Channel 19 */ +#define DMA20 0x8 /* DMA Channel 20 */ +#define DMA21 0x10 /* DMA Channel 21 */ +#define DMA13 0x20 /* DMA Channel 13 */ +#define DMA14 0x40 /* DMA Channel 14 */ +#define DMA5 0x80 /* DMA Channel 5 */ +#define DMA23 0x100 /* DMA Channel 23 */ +#define DMA8 0x200 /* DMA Channel 8 */ +#define DMA9 0x400 /* DMA Channel 9 */ +#define DMA10 0x800 /* DMA Channel 10 */ +#define DMA11 0x1000 /* DMA Channel 11 */ +#define TWI0 0x2000 /* TWI0 */ +#define TWI1 0x4000 /* TWI1 */ +#define CAN0_RX 0x8000 /* CAN0 Receive */ +#define CAN0_TX 0x10000 /* CAN0 Transmit */ +#define MDMA2 0x20000 /* Memory DMA Stream 0 */ +#define MDMA3 0x40000 /* Memory DMA Stream 1 */ +#define MXVR_STAT 0x80000 /* MXVR Status */ +#define MXVR_CM 0x100000 /* MXVR Control Message */ +#define MXVR_AP 0x200000 /* MXVR Asynchronous Packet */ +#define EPPI1_ERR 0x400000 /* EPPI1 Error */ +#define EPPI2_ERR 0x800000 /* EPPI2 Error */ +#define UART3_ERR 0x1000000 /* UART3 Error */ +#define HOST_ERR 0x2000000 /* Host DMA Port Error */ +#define USB_ERR 0x4000000 /* USB Error */ +#define PIXC_ERR 0x8000000 /* Pixel Compositor Error */ +#define NFC_ERR 0x10000000 /* Nand Flash Controller Error */ +#define ATAPI_ERR 0x20000000 /* ATAPI Error */ +#define CAN1_ERR 0x40000000 /* CAN1 Error */ +#define DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */ +#define DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */ +#define DMAR0 0x80000000 /* DMAR0 Block */ +#define DMAR1 0x80000000 /* DMAR1 Block */ + +/* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */ + +#define DMA15 0x1 /* DMA Channel 15 */ +#define DMA16 0x2 /* DMA Channel 16 */ +#define DMA17 0x4 /* DMA Channel 17 */ +#define DMA22 0x8 /* DMA Channel 22 */ +#define CNT 0x10 /* Counter */ +#define KEY 0x20 /* Keypad */ +#define CAN1_RX 0x40 /* CAN1 Receive */ +#define CAN1_TX 0x80 /* CAN1 Transmit */ +#define SDH_INT_MASK0 0x100 /* SDH Mask 0 */ +#define SDH_INT_MASK1 0x200 /* SDH Mask 1 */ +#define USB_EINT 0x400 /* USB Exception */ +#define USB_INT0 0x800 /* USB Interrupt 0 */ +#define USB_INT1 0x1000 /* USB Interrupt 1 */ +#define USB_INT2 0x2000 /* USB Interrupt 2 */ +#define USB_DMAINT 0x4000 /* USB DMA */ +#define OTPSEC 0x8000 /* OTP Access Complete */ +#define TIMER0 0x400000 /* Timer 0 */ +#define TIMER1 0x800000 /* Timer 1 */ +#define TIMER2 0x1000000 /* Timer 2 */ +#define TIMER3 0x2000000 /* Timer 3 */ +#define TIMER4 0x4000000 /* Timer 4 */ +#define TIMER5 0x8000000 /* Timer 5 */ +#define TIMER6 0x10000000 /* Timer 6 */ +#define TIMER7 0x20000000 /* Timer 7 */ +#define PINT2 0x40000000 /* Pin Interrupt 2 */ +#define PINT3 0x80000000 /* Pin Interrupt 3 */ + +/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ + +#define DMAEN 0x1 /* DMA Channel Enable */ +#define WNR 0x2 /* DMA Direction */ +#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */ +#define DMA2D 0x10 /* DMA Mode */ +#define RESTART 0x20 /* Work Unit Transitions */ +#define DI_SEL 0x40 /* Data Interrupt Timing Select */ +#define DI_EN 0x80 /* Data Interrupt Enable */ + +#define NDSIZE 0xf00 /* Flex Descriptor Size */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ + +#define DMAFLOW 0xf000 /* Next Operation */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ + +#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x2 /* DMA Error Interrupt Status */ +#define DFETCH 0x4 /* DMA Descriptor Fetch */ +#define DMA_RUN 0x8 /* DMA Channel Running */ + +/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ + +#define CTYPE 0x40 /* DMA Channel Type */ +#define PMAP 0xf000 /* Peripheral Mapped To This Channel */ + +/* Bit masks for DMACx_TCPER */ + +#define DCB_TRAFFIC_PERIOD 0xf /* DCB Traffic Control Period */ +#define DEB_TRAFFIC_PERIOD 0xf0 /* DEB Traffic Control Period */ +#define DAB_TRAFFIC_PERIOD 0x700 /* DAB Traffic Control Period */ +#define MDMA_ROUND_ROBIN_PERIOD 0xf800 /* MDMA Round Robin Period */ + +/* Bit masks for DMACx_TCCNT */ + +#define DCB_TRAFFIC_COUNT 0xf /* DCB Traffic Control Count */ +#define DEB_TRAFFIC_COUNT 0xf0 /* DEB Traffic Control Count */ +#define DAB_TRAFFIC_COUNT 0x700 /* DAB Traffic Control Count */ +#define MDMA_ROUND_ROBIN_COUNT 0xf800 /* MDMA Round Robin Count */ + +/* Bit masks for DMAC1_PERIMUX */ + +#define PMUXSDH 0x1 /* Peripheral Select for DMA22 channel */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + + +/* Bit masks for EBIU_AMBCTL0 */ + +#define B0RDYEN 0x1 /* Bank 0 ARDY Enable */ +#define B0RDYPOL 0x2 /* Bank 0 ARDY Polarity */ +#define B0TT 0xc /* Bank 0 transition time */ +#define B0ST 0x30 /* Bank 0 Setup time */ +#define B0HT 0xc0 /* Bank 0 Hold time */ +#define B0RAT 0xf00 /* Bank 0 Read access time */ +#define B0WAT 0xf000 /* Bank 0 write access time */ +#define B1RDYEN 0x10000 /* Bank 1 ARDY Enable */ +#define B1RDYPOL 0x20000 /* Bank 1 ARDY Polarity */ +#define B1TT 0xc0000 /* Bank 1 transition time */ +#define B1ST 0x300000 /* Bank 1 Setup time */ +#define B1HT 0xc00000 /* Bank 1 Hold time */ +#define B1RAT 0xf000000 /* Bank 1 Read access time */ +#define B1WAT 0xf0000000 /* Bank 1 write access time */ + +/* Bit masks for EBIU_AMBCTL1 */ + +#define B2RDYEN 0x1 /* Bank 2 ARDY Enable */ +#define B2RDYPOL 0x2 /* Bank 2 ARDY Polarity */ +#define B2TT 0xc /* Bank 2 transition time */ +#define B2ST 0x30 /* Bank 2 Setup time */ +#define B2HT 0xc0 /* Bank 2 Hold time */ +#define B2RAT 0xf00 /* Bank 2 Read access time */ +#define B2WAT 0xf000 /* Bank 2 write access time */ +#define B3RDYEN 0x10000 /* Bank 3 ARDY Enable */ +#define B3RDYPOL 0x20000 /* Bank 3 ARDY Polarity */ +#define B3TT 0xc0000 /* Bank 3 transition time */ +#define B3ST 0x300000 /* Bank 3 Setup time */ +#define B3HT 0xc00000 /* Bank 3 Hold time */ +#define B3RAT 0xf000000 /* Bank 3 Read access time */ +#define B3WAT 0xf0000000 /* Bank 3 write access time */ + +/* Bit masks for EBIU_MBSCTL */ + +#define AMSB0CTL 0x3 /* Async Memory Bank 0 select */ +#define AMSB1CTL 0xc /* Async Memory Bank 1 select */ +#define AMSB2CTL 0x30 /* Async Memory Bank 2 select */ +#define AMSB3CTL 0xc0 /* Async Memory Bank 3 select */ + +/* Bit masks for EBIU_MODE */ + +#define B0MODE 0x3 /* Async Memory Bank 0 Access Mode */ +#define B1MODE 0xc /* Async Memory Bank 1 Access Mode */ +#define B2MODE 0x30 /* Async Memory Bank 2 Access Mode */ +#define B3MODE 0xc0 /* Async Memory Bank 3 Access Mode */ + +/* Bit masks for EBIU_FCTL */ + +#define TESTSETLOCK 0x1 /* Test set lock */ +#define BCLK 0x6 /* Burst clock frequency */ +#define PGWS 0x38 /* Page wait states */ +#define PGSZ 0x40 /* Page size */ +#define RDDL 0x380 /* Read data delay */ + +/* Bit masks for EBIU_ARBSTAT */ + +#define ARBSTAT 0x1 /* Arbitration status */ +#define BGSTAT 0x2 /* Bus grant status */ + +/* Bit masks for EBIU_DDRCTL0 */ + +#define TREFI 0x3fff /* Refresh Interval */ +#define TRFC 0x3c000 /* Auto-refresh command period */ +#define TRP 0x3c0000 /* Pre charge-to-active command period */ +#define TRAS 0x3c00000 /* Min Active-to-pre charge time */ +#define TRC 0x3c000000 /* Active-to-active time */ +#define DDR_TRAS(x) ((x<<22)&TRAS) /* DDR tRAS = (1~15) cycles */ +#define DDR_TRP(x) ((x<<18)&TRP) /* DDR tRP = (1~15) cycles */ +#define DDR_TRC(x) ((x<<26)&TRC) /* DDR tRC = (1~15) cycles */ +#define DDR_TRFC(x) ((x<<14)&TRFC) /* DDR tRFC = (1~15) cycles */ +#define DDR_TREFI(x) (x&TREFI) /* DDR tRFC = (1~15) cycles */ + +/* Bit masks for EBIU_DDRCTL1 */ + +#define TRCD 0xf /* Active-to-Read/write delay */ +#define TMRD 0xf0 /* Mode register set to active */ +#define TWR 0x300 /* Write Recovery time */ +#define DDRDATWIDTH 0x3000 /* DDR data width */ +#define EXTBANKS 0xc000 /* External banks */ +#define DDRDEVWIDTH 0x30000 /* DDR device width */ +#define DDRDEVSIZE 0xc0000 /* DDR device size */ +#define TWTR 0xf0000000 /* Write-to-read delay */ +#define DDR_TWTR(x) ((x<<28)&TWTR) /* DDR tWTR = (1~15) cycles */ +#define DDR_TMRD(x) ((x<<4)&TMRD) /* DDR tMRD = (1~15) cycles */ +#define DDR_TWR(x) ((x<<8)&TWR) /* DDR tWR = (1~15) cycles */ +#define DDR_TRCD(x) (x&TRCD) /* DDR tRCD = (1~15) cycles */ +#define DDR_DATWIDTH 0x2000 /* DDR data width */ +#define EXTBANK_1 0 /* 1 external bank */ +#define EXTBANK_2 0x4000 /* 2 external banks */ +#define DEVSZ_64 0x40000 /* DDR External Bank Size = 64MB */ +#define DEVSZ_128 0x80000 /* DDR External Bank Size = 128MB */ +#define DEVSZ_256 0xc0000 /* DDR External Bank Size = 256MB */ +#define DEVSZ_512 0 /* DDR External Bank Size = 512MB */ +#define DEVWD_4 0 /* DDR Device Width = 4 Bits */ +#define DEVWD_8 0x10000 /* DDR Device Width = 8 Bits */ +#define DEVWD_16 0x20000 /* DDR Device Width = 16 Bits */ + +/* Bit masks for EBIU_DDRCTL2 */ + +#define BURSTLENGTH 0x7 /* Burst length */ +#define CASLATENCY 0x70 /* CAS latency */ +#define DLLRESET 0x100 /* DLL Reset */ +#define REGE 0x1000 /* Register mode enable */ +#define CL_1_5 0x50 /* DDR CAS Latency = 1.5 cycles */ +#define CL_2 0x20 /* DDR CAS Latency = 2 cycles */ +#define CL_2_5 0x60 /* DDR CAS Latency = 2.5 cycles */ +#define CL_3 0x30 /* DDR CAS Latency = 3 cycles */ + +/* Bit masks for EBIU_DDRCTL3 */ + +#define PASR 0x7 /* Partial array self-refresh */ + +/* Bit masks for EBIU_DDRQUE */ + +#define DEB1_PFLEN 0x3 /* Pre fetch length for DEB1 accesses */ +#define DEB2_PFLEN 0xc /* Pre fetch length for DEB2 accesses */ +#define DEB3_PFLEN 0x30 /* Pre fetch length for DEB3 accesses */ +#define DEB_ARB_PRIORITY 0x700 /* Arbitration between DEB busses */ +#define DEB1_URGENT 0x1000 /* DEB1 Urgent */ +#define DEB2_URGENT 0x2000 /* DEB2 Urgent */ +#define DEB3_URGENT 0x4000 /* DEB3 Urgent */ + +/* Bit masks for EBIU_ERRMST */ + +#define DEB1_ERROR 0x1 /* DEB1 Error */ +#define DEB2_ERROR 0x2 /* DEB2 Error */ +#define DEB3_ERROR 0x4 /* DEB3 Error */ +#define CORE_ERROR 0x8 /* Core error */ +#define DEB_MERROR 0x10 /* DEB1 Error (2nd) */ +#define DEB2_MERROR 0x20 /* DEB2 Error (2nd) */ +#define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ +#define CORE_MERROR 0x80 /* Core Error (2nd) */ + +/* Bit masks for EBIU_ERRADD */ + +#define ERROR_ADDRESS 0xffffffff /* Error Address */ + +/* Bit masks for EBIU_RSTCTL */ + +#define DDRSRESET 0x1 /* DDR soft reset */ +#define PFTCHSRESET 0x4 /* DDR prefetch reset */ +#define SRREQ 0x8 /* Self-refresh request */ +#define SRACK 0x10 /* Self-refresh acknowledge */ +#define MDDRENABLE 0x20 /* Mobile DDR enable */ + +/* Bit masks for EBIU_DDRBRC0 */ + +#define BRC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC1 */ + +#define BRC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC2 */ + +#define BRC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC3 */ + +#define BRC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC4 */ + +#define BRC4 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC5 */ + +#define BRC5 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC6 */ + +#define BRC6 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC7 */ + +#define BRC7 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC0 */ + +#define BWC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC1 */ + +#define BWC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC2 */ + +#define BWC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC3 */ + +#define BWC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC4 */ + +#define BWC4 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC5 */ + +#define BWC5 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC6 */ + +#define BWC6 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC7 */ + +#define BWC7 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRACCT */ + +#define ACCT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRTACT */ + +#define TECT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRARCT */ + +#define ARCT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC0 */ + +#define GC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC1 */ + +#define GC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC2 */ + +#define GC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC3 */ + +#define GC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRMCEN */ + +#define B0WCENABLE 0x1 /* Bank 0 write count enable */ +#define B1WCENABLE 0x2 /* Bank 1 write count enable */ +#define B2WCENABLE 0x4 /* Bank 2 write count enable */ +#define B3WCENABLE 0x8 /* Bank 3 write count enable */ +#define B4WCENABLE 0x10 /* Bank 4 write count enable */ +#define B5WCENABLE 0x20 /* Bank 5 write count enable */ +#define B6WCENABLE 0x40 /* Bank 6 write count enable */ +#define B7WCENABLE 0x80 /* Bank 7 write count enable */ +#define B0RCENABLE 0x100 /* Bank 0 read count enable */ +#define B1RCENABLE 0x200 /* Bank 1 read count enable */ +#define B2RCENABLE 0x400 /* Bank 2 read count enable */ +#define B3RCENABLE 0x800 /* Bank 3 read count enable */ +#define B4RCENABLE 0x1000 /* Bank 4 read count enable */ +#define B5RCENABLE 0x2000 /* Bank 5 read count enable */ +#define B6RCENABLE 0x4000 /* Bank 6 read count enable */ +#define B7RCENABLE 0x8000 /* Bank 7 read count enable */ +#define ROWACTCENABLE 0x10000 /* DDR Row activate count enable */ +#define RWTCENABLE 0x20000 /* DDR R/W Turn around count enable */ +#define ARCENABLE 0x40000 /* DDR Auto-refresh count enable */ +#define GC0ENABLE 0x100000 /* DDR Grant count 0 enable */ +#define GC1ENABLE 0x200000 /* DDR Grant count 1 enable */ +#define GC2ENABLE 0x400000 /* DDR Grant count 2 enable */ +#define GC3ENABLE 0x800000 /* DDR Grant count 3 enable */ +#define GCCONTROL 0x3000000 /* DDR Grant Count Control */ + +/* Bit masks for EBIU_DDRMCCL */ + +#define CB0WCOUNT 0x1 /* Clear write count 0 */ +#define CB1WCOUNT 0x2 /* Clear write count 1 */ +#define CB2WCOUNT 0x4 /* Clear write count 2 */ +#define CB3WCOUNT 0x8 /* Clear write count 3 */ +#define CB4WCOUNT 0x10 /* Clear write count 4 */ +#define CB5WCOUNT 0x20 /* Clear write count 5 */ +#define CB6WCOUNT 0x40 /* Clear write count 6 */ +#define CB7WCOUNT 0x80 /* Clear write count 7 */ +#define CBRCOUNT 0x100 /* Clear read count 0 */ +#define CB1RCOUNT 0x200 /* Clear read count 1 */ +#define CB2RCOUNT 0x400 /* Clear read count 2 */ +#define CB3RCOUNT 0x800 /* Clear read count 3 */ +#define CB4RCOUNT 0x1000 /* Clear read count 4 */ +#define CB5RCOUNT 0x2000 /* Clear read count 5 */ +#define CB6RCOUNT 0x4000 /* Clear read count 6 */ +#define CB7RCOUNT 0x8000 /* Clear read count 7 */ +#define CRACOUNT 0x10000 /* Clear row activation count */ +#define CRWTACOUNT 0x20000 /* Clear R/W turn-around count */ +#define CARCOUNT 0x40000 /* Clear auto-refresh count */ +#define CG0COUNT 0x100000 /* Clear grant count 0 */ +#define CG1COUNT 0x200000 /* Clear grant count 1 */ +#define CG2COUNT 0x400000 /* Clear grant count 2 */ +#define CG3COUNT 0x800000 /* Clear grant count 3 */ + +/* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */ + +#define Px0 0x1 /* GPIO 0 */ +#define Px1 0x2 /* GPIO 1 */ +#define Px2 0x4 /* GPIO 2 */ +#define Px3 0x8 /* GPIO 3 */ +#define Px4 0x10 /* GPIO 4 */ +#define Px5 0x20 /* GPIO 5 */ +#define Px6 0x40 /* GPIO 6 */ +#define Px7 0x80 /* GPIO 7 */ +#define Px8 0x100 /* GPIO 8 */ +#define Px9 0x200 /* GPIO 9 */ +#define Px10 0x400 /* GPIO 10 */ +#define Px11 0x800 /* GPIO 11 */ +#define Px12 0x1000 /* GPIO 12 */ +#define Px13 0x2000 /* GPIO 13 */ +#define Px14 0x4000 /* GPIO 14 */ +#define Px15 0x8000 /* GPIO 15 */ + +/* Bit masks for PORTA_MUX - PORTJ_MUX */ + +#define PxM0 0x3 /* GPIO Mux 0 */ +#define PxM1 0xc /* GPIO Mux 1 */ +#define PxM2 0x30 /* GPIO Mux 2 */ +#define PxM3 0xc0 /* GPIO Mux 3 */ +#define PxM4 0x300 /* GPIO Mux 4 */ +#define PxM5 0xc00 /* GPIO Mux 5 */ +#define PxM6 0x3000 /* GPIO Mux 6 */ +#define PxM7 0xc000 /* GPIO Mux 7 */ +#define PxM8 0x30000 /* GPIO Mux 8 */ +#define PxM9 0xc0000 /* GPIO Mux 9 */ +#define PxM10 0x300000 /* GPIO Mux 10 */ +#define PxM11 0xc00000 /* GPIO Mux 11 */ +#define PxM12 0x3000000 /* GPIO Mux 12 */ +#define PxM13 0xc000000 /* GPIO Mux 13 */ +#define PxM14 0x30000000 /* GPIO Mux 14 */ +#define PxM15 0xc0000000 /* GPIO Mux 15 */ + + +/* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */ + +#define IB0 0x1 /* Interrupt Bit 0 */ +#define IB1 0x2 /* Interrupt Bit 1 */ +#define IB2 0x4 /* Interrupt Bit 2 */ +#define IB3 0x8 /* Interrupt Bit 3 */ +#define IB4 0x10 /* Interrupt Bit 4 */ +#define IB5 0x20 /* Interrupt Bit 5 */ +#define IB6 0x40 /* Interrupt Bit 6 */ +#define IB7 0x80 /* Interrupt Bit 7 */ +#define IB8 0x100 /* Interrupt Bit 8 */ +#define IB9 0x200 /* Interrupt Bit 9 */ +#define IB10 0x400 /* Interrupt Bit 10 */ +#define IB11 0x800 /* Interrupt Bit 11 */ +#define IB12 0x1000 /* Interrupt Bit 12 */ +#define IB13 0x2000 /* Interrupt Bit 13 */ +#define IB14 0x4000 /* Interrupt Bit 14 */ +#define IB15 0x8000 /* Interrupt Bit 15 */ + +/* Bit masks for TIMERx_CONFIG */ + +#define TMODE 0x3 /* Timer Mode */ +#define PULSE_HI 0x4 /* Pulse Polarity */ +#define PERIOD_CNT 0x8 /* Period Count */ +#define IRQ_ENA 0x10 /* Interrupt Request Enable */ +#define TIN_SEL 0x20 /* Timer Input Select */ +#define OUT_DIS 0x40 /* Output Pad Disable */ +#define CLK_SEL 0x80 /* Timer Clock Select */ +#define TOGGLE_HI 0x100 /* Toggle Mode */ +#define EMU_RUN 0x200 /* Emulation Behavior Select */ +#define ERR_TYP 0xc000 /* Error Type */ + +/* Bit masks for TIMER_ENABLE0 */ + +#define TIMEN0 0x1 /* Timer 0 Enable */ +#define TIMEN1 0x2 /* Timer 1 Enable */ +#define TIMEN2 0x4 /* Timer 2 Enable */ +#define TIMEN3 0x8 /* Timer 3 Enable */ +#define TIMEN4 0x10 /* Timer 4 Enable */ +#define TIMEN5 0x20 /* Timer 5 Enable */ +#define TIMEN6 0x40 /* Timer 6 Enable */ +#define TIMEN7 0x80 /* Timer 7 Enable */ + +/* Bit masks for TIMER_DISABLE0 */ + +#define TIMDIS0 0x1 /* Timer 0 Disable */ +#define TIMDIS1 0x2 /* Timer 1 Disable */ +#define TIMDIS2 0x4 /* Timer 2 Disable */ +#define TIMDIS3 0x8 /* Timer 3 Disable */ +#define TIMDIS4 0x10 /* Timer 4 Disable */ +#define TIMDIS5 0x20 /* Timer 5 Disable */ +#define TIMDIS6 0x40 /* Timer 6 Disable */ +#define TIMDIS7 0x80 /* Timer 7 Disable */ + +/* Bit masks for TIMER_STATUS0 */ + +#define TIMIL0 0x1 /* Timer 0 Interrupt */ +#define TIMIL1 0x2 /* Timer 1 Interrupt */ +#define TIMIL2 0x4 /* Timer 2 Interrupt */ +#define TIMIL3 0x8 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x10 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x20 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x40 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x80 /* Timer 3 Counter Overflow */ +#define TRUN0 0x1000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x2000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x4000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x8000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x10000 /* Timer 4 Interrupt */ +#define TIMIL5 0x20000 /* Timer 5 Interrupt */ +#define TIMIL6 0x40000 /* Timer 6 Interrupt */ +#define TIMIL7 0x80000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Bit masks for WDOG_CTL */ + +#define WDEV 0x6 /* Watchdog Event */ +#define WDEN 0xff0 /* Watchdog Enable */ +#define WDRO 0x8000 /* Watchdog Rolled Over */ + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define DEBE 0x2 /* Debounce Enable */ +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* Bit masks for RTC_STAT */ + +#define SECONDS 0x3f /* Seconds */ +#define MINUTES 0xfc0 /* Minutes */ +#define HOURS 0x1f000 /* Hours */ +#define DAY_COUNTER 0xfffe0000 /* Day Counter */ + +/* Bit masks for RTC_ICTL */ + +#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ +#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ +#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ +#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ +#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ +#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ +#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ +#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ + +/* Bit masks for RTC_ISTAT */ + +#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ +#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ +#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ +#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ +#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ +#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ +#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ +#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete */ + +/* Bit masks for RTC_SWCNT */ + +#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */ + +/* Bit masks for RTC_ALARM */ + +#define SECONDS 0x3f /* Seconds */ +#define MINUTES 0xfc0 /* Minutes */ +#define HOURS 0x1f000 /* Hours */ +#define DAY 0xfffe0000 /* Day */ + +/* Bit masks for RTC_PREN */ + +#define PREN 0x1 /* Prescaler Enable */ + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define RSTDABL 0x2 /* Reset Disable */ +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define EMUOVR 0x4000 /* Emulation Override */ +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define SECURE1 0x2 /* SECURE 1 */ +#define SECURE2 0x4 /* SECURE 2 */ +#define SECURE3 0x8 /* SECURE 3 */ + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define SECSTAT 0xe0 /* Secure Status */ + +/* Bit masks for PLL_DIV */ + +#define CSEL 0x30 /* Core Select */ +#define SSEL 0xf /* System Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +/* Bit masks for PLL_CTL */ + +#define MSEL 0x7e00 /* Multiplier Select */ +#define BYPASS 0x100 /* PLL Bypass Enable */ +#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ +#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ +#define PDWN 0x20 /* Power Down */ +#define STOPCK 0x8 /* Stop Clock */ +#define PLL_OFF 0x2 /* Disable PLL */ +#define DF 0x1 /* Divide Frequency */ + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* Bit masks for PLL_STAT */ + +#define PLL_LOCKED 0x20 /* PLL Locked Status */ +#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ +#define FULL_ON 0x2 /* Full-On Mode */ +#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ +#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ +#define CANWS 0x800 /* CAN Wake-Up Status */ +#define USBWS 0x2000 /* USB Wake-Up Status */ +#define KPADWS 0x4000 /* Keypad Wake-Up Status */ +#define ROTWS 0x8000 /* Rotary Wake-Up Status */ +#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ + +/* Bit masks for VR_CTL */ + +#define FREQ 0x3 /* Regulator Switching Frequency */ +#define GAIN 0xc /* Voltage Output Level Gain */ +#define VLEV 0xf0 /* Internal Voltage Level */ +#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ +#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ +#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ +#define GPWE 0x400 /* General-Purpose Wake-Up Enable */ +#define USBWE 0x800 /* USB Wake-Up Enable */ +#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ +#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ + +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +/* Bit masks for NFC_CTL */ + +#define WR_DLY 0xf /* Write Strobe Delay */ +#define RD_DLY 0xf0 /* Read Strobe Delay */ +#define NWIDTH 0x100 /* NAND Data Width */ +#define PG_SIZE 0x200 /* Page Size */ + +/* Bit masks for NFC_STAT */ + +#define NBUSY 0x1 /* Not Busy */ +#define WB_FULL 0x2 /* Write Buffer Full */ +#define PG_WR_STAT 0x4 /* Page Write Pending */ +#define PG_RD_STAT 0x8 /* Page Read Pending */ +#define WB_EMPTY 0x10 /* Write Buffer Empty */ + +/* Bit masks for NFC_IRQSTAT */ + +#define NBUSYIRQ 0x1 /* Not Busy IRQ */ +#define WB_OVF 0x2 /* Write Buffer Overflow */ +#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ +#define RD_RDY 0x8 /* Read Data Ready */ +#define WR_DONE 0x10 /* Page Write Done */ + +/* Bit masks for NFC_IRQMASK */ + +#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ +#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ +#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ +#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ +#define MASK_WRDONE 0x10 /* Mask Write Done */ + +/* Bit masks for NFC_RST */ + +#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ + +/* Bit masks for NFC_PGCTL */ + +#define PG_RD_START 0x1 /* Page Read Start */ +#define PG_WR_START 0x2 /* Page Write Start */ + +/* Bit masks for NFC_ECC0 */ + +#define ECC0 0x7ff /* Parity Calculation Result0 */ + +/* Bit masks for NFC_ECC1 */ + +#define ECC1 0x7ff /* Parity Calculation Result1 */ + +/* Bit masks for NFC_ECC2 */ + +#define ECC2 0x7ff /* Parity Calculation Result2 */ + +/* Bit masks for NFC_ECC3 */ + +#define ECC3 0x7ff /* Parity Calculation Result3 */ + +/* Bit masks for NFC_COUNT */ + +#define ECCCNT 0x3ff /* Transfer Count */ + +/* Bit masks for CAN0_CONTROL */ + +#define SRS 0x1 /* Software Reset */ +#define DNM 0x2 /* DeviceNet Mode */ +#define ABO 0x4 /* Auto Bus On */ +#define WBA 0x10 /* Wakeup On CAN Bus Activity */ +#define SMR 0x20 /* Sleep Mode Request */ +#define CSR 0x40 /* CAN Suspend Mode Request */ +#define CCR 0x80 /* CAN Configuration Mode Request */ + +/* Bit masks for CAN0_STATUS */ + +#define WT 0x1 /* CAN Transmit Warning Flag */ +#define WR 0x2 /* CAN Receive Warning Flag */ +#define EP 0x4 /* CAN Error Passive Mode */ +#define EBO 0x8 /* CAN Error Bus Off Mode */ +#define CSA 0x40 /* CAN Suspend Mode Acknowledge */ +#define CCA 0x80 /* CAN Configuration Mode Acknowledge */ +#define MBPTR 0x1f00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode Status */ +#define REC 0x8000 /* Receive Mode Status */ + +/* Bit masks for CAN0_DEBUG */ + +#define DEC 0x1 /* Disable Transmit/Receive Error Counters */ +#define DRI 0x2 /* Disable CANRX Input Pin */ +#define DTO 0x4 /* Disable CANTX Output Pin */ +#define DIL 0x8 /* Disable Internal Loop */ +#define MAA 0x10 /* Mode Auto-Acknowledge */ +#define MRB 0x20 /* Mode Read Back */ +#define CDE 0x8000 /* CAN Debug Mode Enable */ + +/* Bit masks for CAN0_CLOCK */ + +#define BRP 0x3ff /* CAN Bit Rate Prescaler */ + +/* Bit masks for CAN0_TIMING */ + +#define SJW 0x300 /* Synchronization Jump Width */ +#define SAM 0x80 /* Sampling */ +#define TSEG2 0x70 /* Time Segment 2 */ +#define TSEG1 0xf /* Time Segment 1 */ + +/* Bit masks for CAN0_INTR */ + +#define CANRX 0x80 /* Serial Input From Transceiver */ +#define CANTX 0x40 /* Serial Output To Transceiver */ +#define SMACK 0x8 /* Sleep Mode Acknowledge */ +#define GIRQ 0x4 /* Global Interrupt Request Status */ +#define MBTIRQ 0x2 /* Mailbox Transmit Interrupt Request */ +#define MBRIRQ 0x1 /* Mailbox Receive Interrupt Request */ + +/* Bit masks for CAN0_GIM */ + +#define EWTIM 0x1 /* Error Warning Transmit Interrupt Mask */ +#define EWRIM 0x2 /* Error Warning Receive Interrupt Mask */ +#define EPIM 0x4 /* Error Passive Interrupt Mask */ +#define BOIM 0x8 /* Bus Off Interrupt Mask */ +#define WUIM 0x10 /* Wakeup Interrupt Mask */ +#define UIAIM 0x20 /* Unimplemented Address Interrupt Mask */ +#define AAIM 0x40 /* Abort Acknowledge Interrupt Mask */ +#define RMLIM 0x80 /* Receive Message Lost Interrupt Mask */ +#define UCEIM 0x100 /* Universal Counter Exceeded Interrupt Mask */ +#define ADIM 0x400 /* Access Denied Interrupt Mask */ + +/* Bit masks for CAN0_GIS */ + +#define EWTIS 0x1 /* Error Warning Transmit Interrupt Status */ +#define EWRIS 0x2 /* Error Warning Receive Interrupt Status */ +#define EPIS 0x4 /* Error Passive Interrupt Status */ +#define BOIS 0x8 /* Bus Off Interrupt Status */ +#define WUIS 0x10 /* Wakeup Interrupt Status */ +#define UIAIS 0x20 /* Unimplemented Address Interrupt Status */ +#define AAIS 0x40 /* Abort Acknowledge Interrupt Status */ +#define RMLIS 0x80 /* Receive Message Lost Interrupt Status */ +#define UCEIS 0x100 /* Universal Counter Exceeded Interrupt Status */ +#define ADIS 0x400 /* Access Denied Interrupt Status */ + +/* Bit masks for CAN0_GIF */ + +#define EWTIF 0x1 /* Error Warning Transmit Interrupt Flag */ +#define EWRIF 0x2 /* Error Warning Receive Interrupt Flag */ +#define EPIF 0x4 /* Error Passive Interrupt Flag */ +#define BOIF 0x8 /* Bus Off Interrupt Flag */ +#define WUIF 0x10 /* Wakeup Interrupt Flag */ +#define UIAIF 0x20 /* Unimplemented Address Interrupt Flag */ +#define AAIF 0x40 /* Abort Acknowledge Interrupt Flag */ +#define RMLIF 0x80 /* Receive Message Lost Interrupt Flag */ +#define UCEIF 0x100 /* Universal Counter Exceeded Interrupt Flag */ +#define ADIF 0x400 /* Access Denied Interrupt Flag */ + +/* Bit masks for CAN0_MBTD */ + +#define TDR 0x80 /* Temporary Disable Request */ +#define TDA 0x40 /* Temporary Disable Acknowledge */ +#define TDPTR 0x1f /* Temporary Disable Pointer */ + +/* Bit masks for CAN0_UCCNF */ + +#define UCCNF 0xf /* Universal Counter Configuration */ +#define UCRC 0x20 /* Universal Counter Reload/Clear */ +#define UCCT 0x40 /* Universal Counter CAN Trigger */ +#define UCE 0x80 /* Universal Counter Enable */ + +/* Bit masks for CAN0_UCCNT */ + +#define UCCNT 0xffff /* Universal Counter Count Value */ + +/* Bit masks for CAN0_UCRC */ + +#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */ + +/* Bit masks for CAN0_CEC */ + +#define RXECNT 0xff /* Receive Error Counter */ +#define TXECNT 0xff00 /* Transmit Error Counter */ + +/* Bit masks for CAN0_ESR */ + +#define FER 0x80 /* Form Error */ +#define BEF 0x40 /* Bit Error Flag */ +#define SA0 0x20 /* Stuck At Dominant */ +#define CRCE 0x10 /* CRC Error */ +#define SER 0x8 /* Stuff Bit Error */ +#define ACKE 0x4 /* Acknowledge Error */ + +/* Bit masks for CAN0_EWR */ + +#define EWLTEC 0xff00 /* Transmit Error Warning Limit */ +#define EWLREC 0xff /* Receive Error Warning Limit */ + +/* Bit masks for CAN0_AMxx_H */ + +#define FDF 0x8000 /* Filter On Data Field */ +#define FMD 0x4000 /* Full Mask Data */ +#define AMIDE 0x2000 /* Acceptance Mask Identifier Extension */ +#define BASEID 0x1ffc /* Base Identifier */ +#define EXTID_HI 0x3 /* Extended Identifier High Bits */ + +/* Bit masks for CAN0_AMxx_L */ + +#define EXTID_LO 0xffff /* Extended Identifier Low Bits */ +#define DFM 0xffff /* Data Field Mask */ + +/* Bit masks for CAN0_MBxx_ID1 */ + +#define AME 0x8000 /* Acceptance Mask Enable */ +#define RTR 0x4000 /* Remote Transmission Request */ +#define IDE 0x2000 /* Identifier Extension */ +#define BASEID 0x1ffc /* Base Identifier */ +#define EXTID_HI 0x3 /* Extended Identifier High Bits */ + +/* Bit masks for CAN0_MBxx_ID0 */ + +#define EXTID_LO 0xffff /* Extended Identifier Low Bits */ +#define DFM 0xffff /* Data Field Mask */ + +/* Bit masks for CAN0_MBxx_TIMESTAMP */ + +#define TSV 0xffff /* Time Stamp Value */ + +/* Bit masks for CAN0_MBxx_LENGTH */ + +#define DLC 0xf /* Data Length Code */ + +/* Bit masks for CAN0_MBxx_DATA3 */ + +#define CAN_BYTE0 0xff00 /* Data Field Byte 0 */ +#define CAN_BYTE1 0xff /* Data Field Byte 1 */ + +/* Bit masks for CAN0_MBxx_DATA2 */ + +#define CAN_BYTE2 0xff00 /* Data Field Byte 2 */ +#define CAN_BYTE3 0xff /* Data Field Byte 3 */ + +/* Bit masks for CAN0_MBxx_DATA1 */ + +#define CAN_BYTE4 0xff00 /* Data Field Byte 4 */ +#define CAN_BYTE5 0xff /* Data Field Byte 5 */ + +/* Bit masks for CAN0_MBxx_DATA0 */ + +#define CAN_BYTE6 0xff00 /* Data Field Byte 6 */ +#define CAN_BYTE7 0xff /* Data Field Byte 7 */ + +/* Bit masks for CAN0_MC1 */ + +#define MC0 0x1 /* Mailbox 0 Enable */ +#define MC1 0x2 /* Mailbox 1 Enable */ +#define MC2 0x4 /* Mailbox 2 Enable */ +#define MC3 0x8 /* Mailbox 3 Enable */ +#define MC4 0x10 /* Mailbox 4 Enable */ +#define MC5 0x20 /* Mailbox 5 Enable */ +#define MC6 0x40 /* Mailbox 6 Enable */ +#define MC7 0x80 /* Mailbox 7 Enable */ +#define MC8 0x100 /* Mailbox 8 Enable */ +#define MC9 0x200 /* Mailbox 9 Enable */ +#define MC10 0x400 /* Mailbox 10 Enable */ +#define MC11 0x800 /* Mailbox 11 Enable */ +#define MC12 0x1000 /* Mailbox 12 Enable */ +#define MC13 0x2000 /* Mailbox 13 Enable */ +#define MC14 0x4000 /* Mailbox 14 Enable */ +#define MC15 0x8000 /* Mailbox 15 Enable */ + +/* Bit masks for CAN0_MC2 */ + +#define MC16 0x1 /* Mailbox 16 Enable */ +#define MC17 0x2 /* Mailbox 17 Enable */ +#define MC18 0x4 /* Mailbox 18 Enable */ +#define MC19 0x8 /* Mailbox 19 Enable */ +#define MC20 0x10 /* Mailbox 20 Enable */ +#define MC21 0x20 /* Mailbox 21 Enable */ +#define MC22 0x40 /* Mailbox 22 Enable */ +#define MC23 0x80 /* Mailbox 23 Enable */ +#define MC24 0x100 /* Mailbox 24 Enable */ +#define MC25 0x200 /* Mailbox 25 Enable */ +#define MC26 0x400 /* Mailbox 26 Enable */ +#define MC27 0x800 /* Mailbox 27 Enable */ +#define MC28 0x1000 /* Mailbox 28 Enable */ +#define MC29 0x2000 /* Mailbox 29 Enable */ +#define MC30 0x4000 /* Mailbox 30 Enable */ +#define MC31 0x8000 /* Mailbox 31 Enable */ + +/* Bit masks for CAN0_MD1 */ + +#define MD0 0x1 /* Mailbox 0 Receive Enable */ +#define MD1 0x2 /* Mailbox 1 Receive Enable */ +#define MD2 0x4 /* Mailbox 2 Receive Enable */ +#define MD3 0x8 /* Mailbox 3 Receive Enable */ +#define MD4 0x10 /* Mailbox 4 Receive Enable */ +#define MD5 0x20 /* Mailbox 5 Receive Enable */ +#define MD6 0x40 /* Mailbox 6 Receive Enable */ +#define MD7 0x80 /* Mailbox 7 Receive Enable */ +#define MD8 0x100 /* Mailbox 8 Receive Enable */ +#define MD9 0x200 /* Mailbox 9 Receive Enable */ +#define MD10 0x400 /* Mailbox 10 Receive Enable */ +#define MD11 0x800 /* Mailbox 11 Receive Enable */ +#define MD12 0x1000 /* Mailbox 12 Receive Enable */ +#define MD13 0x2000 /* Mailbox 13 Receive Enable */ +#define MD14 0x4000 /* Mailbox 14 Receive Enable */ +#define MD15 0x8000 /* Mailbox 15 Receive Enable */ + +/* Bit masks for CAN0_MD2 */ + +#define MD16 0x1 /* Mailbox 16 Receive Enable */ +#define MD17 0x2 /* Mailbox 17 Receive Enable */ +#define MD18 0x4 /* Mailbox 18 Receive Enable */ +#define MD19 0x8 /* Mailbox 19 Receive Enable */ +#define MD20 0x10 /* Mailbox 20 Receive Enable */ +#define MD21 0x20 /* Mailbox 21 Receive Enable */ +#define MD22 0x40 /* Mailbox 22 Receive Enable */ +#define MD23 0x80 /* Mailbox 23 Receive Enable */ +#define MD24 0x100 /* Mailbox 24 Receive Enable */ +#define MD25 0x200 /* Mailbox 25 Receive Enable */ +#define MD26 0x400 /* Mailbox 26 Receive Enable */ +#define MD27 0x800 /* Mailbox 27 Receive Enable */ +#define MD28 0x1000 /* Mailbox 28 Receive Enable */ +#define MD29 0x2000 /* Mailbox 29 Receive Enable */ +#define MD30 0x4000 /* Mailbox 30 Receive Enable */ +#define MD31 0x8000 /* Mailbox 31 Receive Enable */ + +/* Bit masks for CAN0_RMP1 */ + +#define RMP0 0x1 /* Mailbox 0 Receive Message Pending */ +#define RMP1 0x2 /* Mailbox 1 Receive Message Pending */ +#define RMP2 0x4 /* Mailbox 2 Receive Message Pending */ +#define RMP3 0x8 /* Mailbox 3 Receive Message Pending */ +#define RMP4 0x10 /* Mailbox 4 Receive Message Pending */ +#define RMP5 0x20 /* Mailbox 5 Receive Message Pending */ +#define RMP6 0x40 /* Mailbox 6 Receive Message Pending */ +#define RMP7 0x80 /* Mailbox 7 Receive Message Pending */ +#define RMP8 0x100 /* Mailbox 8 Receive Message Pending */ +#define RMP9 0x200 /* Mailbox 9 Receive Message Pending */ +#define RMP10 0x400 /* Mailbox 10 Receive Message Pending */ +#define RMP11 0x800 /* Mailbox 11 Receive Message Pending */ +#define RMP12 0x1000 /* Mailbox 12 Receive Message Pending */ +#define RMP13 0x2000 /* Mailbox 13 Receive Message Pending */ +#define RMP14 0x4000 /* Mailbox 14 Receive Message Pending */ +#define RMP15 0x8000 /* Mailbox 15 Receive Message Pending */ + +/* Bit masks for CAN0_RMP2 */ + +#define RMP16 0x1 /* Mailbox 16 Receive Message Pending */ +#define RMP17 0x2 /* Mailbox 17 Receive Message Pending */ +#define RMP18 0x4 /* Mailbox 18 Receive Message Pending */ +#define RMP19 0x8 /* Mailbox 19 Receive Message Pending */ +#define RMP20 0x10 /* Mailbox 20 Receive Message Pending */ +#define RMP21 0x20 /* Mailbox 21 Receive Message Pending */ +#define RMP22 0x40 /* Mailbox 22 Receive Message Pending */ +#define RMP23 0x80 /* Mailbox 23 Receive Message Pending */ +#define RMP24 0x100 /* Mailbox 24 Receive Message Pending */ +#define RMP25 0x200 /* Mailbox 25 Receive Message Pending */ +#define RMP26 0x400 /* Mailbox 26 Receive Message Pending */ +#define RMP27 0x800 /* Mailbox 27 Receive Message Pending */ +#define RMP28 0x1000 /* Mailbox 28 Receive Message Pending */ +#define RMP29 0x2000 /* Mailbox 29 Receive Message Pending */ +#define RMP30 0x4000 /* Mailbox 30 Receive Message Pending */ +#define RMP31 0x8000 /* Mailbox 31 Receive Message Pending */ + +/* Bit masks for CAN0_RML1 */ + +#define RML0 0x1 /* Mailbox 0 Receive Message Lost */ +#define RML1 0x2 /* Mailbox 1 Receive Message Lost */ +#define RML2 0x4 /* Mailbox 2 Receive Message Lost */ +#define RML3 0x8 /* Mailbox 3 Receive Message Lost */ +#define RML4 0x10 /* Mailbox 4 Receive Message Lost */ +#define RML5 0x20 /* Mailbox 5 Receive Message Lost */ +#define RML6 0x40 /* Mailbox 6 Receive Message Lost */ +#define RML7 0x80 /* Mailbox 7 Receive Message Lost */ +#define RML8 0x100 /* Mailbox 8 Receive Message Lost */ +#define RML9 0x200 /* Mailbox 9 Receive Message Lost */ +#define RML10 0x400 /* Mailbox 10 Receive Message Lost */ +#define RML11 0x800 /* Mailbox 11 Receive Message Lost */ +#define RML12 0x1000 /* Mailbox 12 Receive Message Lost */ +#define RML13 0x2000 /* Mailbox 13 Receive Message Lost */ +#define RML14 0x4000 /* Mailbox 14 Receive Message Lost */ +#define RML15 0x8000 /* Mailbox 15 Receive Message Lost */ + +/* Bit masks for CAN0_RML2 */ + +#define RML16 0x1 /* Mailbox 16 Receive Message Lost */ +#define RML17 0x2 /* Mailbox 17 Receive Message Lost */ +#define RML18 0x4 /* Mailbox 18 Receive Message Lost */ +#define RML19 0x8 /* Mailbox 19 Receive Message Lost */ +#define RML20 0x10 /* Mailbox 20 Receive Message Lost */ +#define RML21 0x20 /* Mailbox 21 Receive Message Lost */ +#define RML22 0x40 /* Mailbox 22 Receive Message Lost */ +#define RML23 0x80 /* Mailbox 23 Receive Message Lost */ +#define RML24 0x100 /* Mailbox 24 Receive Message Lost */ +#define RML25 0x200 /* Mailbox 25 Receive Message Lost */ +#define RML26 0x400 /* Mailbox 26 Receive Message Lost */ +#define RML27 0x800 /* Mailbox 27 Receive Message Lost */ +#define RML28 0x1000 /* Mailbox 28 Receive Message Lost */ +#define RML29 0x2000 /* Mailbox 29 Receive Message Lost */ +#define RML30 0x4000 /* Mailbox 30 Receive Message Lost */ +#define RML31 0x8000 /* Mailbox 31 Receive Message Lost */ + +/* Bit masks for CAN0_OPSS1 */ + +#define OPSS0 0x1 /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS1 0x2 /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS2 0x4 /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS3 0x8 /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS4 0x10 /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS5 0x20 /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS6 0x40 /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS7 0x80 /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS8 0x100 /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS9 0x200 /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS10 0x400 /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS11 0x800 /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS12 0x1000 /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS13 0x2000 /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS14 0x4000 /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS15 0x8000 /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */ + +/* Bit masks for CAN0_OPSS2 */ + +#define OPSS16 0x1 /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS17 0x2 /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS18 0x4 /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS19 0x8 /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS20 0x10 /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS21 0x20 /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS22 0x40 /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS23 0x80 /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS24 0x100 /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS25 0x200 /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS26 0x400 /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS27 0x800 /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS28 0x1000 /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS29 0x2000 /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS30 0x4000 /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */ +#define OPSS31 0x8000 /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */ + +/* Bit masks for CAN0_TRS1 */ + +#define TRS0 0x1 /* Mailbox 0 Transmit Request Set */ +#define TRS1 0x2 /* Mailbox 1 Transmit Request Set */ +#define TRS2 0x4 /* Mailbox 2 Transmit Request Set */ +#define TRS3 0x8 /* Mailbox 3 Transmit Request Set */ +#define TRS4 0x10 /* Mailbox 4 Transmit Request Set */ +#define TRS5 0x20 /* Mailbox 5 Transmit Request Set */ +#define TRS6 0x40 /* Mailbox 6 Transmit Request Set */ +#define TRS7 0x80 /* Mailbox 7 Transmit Request Set */ +#define TRS8 0x100 /* Mailbox 8 Transmit Request Set */ +#define TRS9 0x200 /* Mailbox 9 Transmit Request Set */ +#define TRS10 0x400 /* Mailbox 10 Transmit Request Set */ +#define TRS11 0x800 /* Mailbox 11 Transmit Request Set */ +#define TRS12 0x1000 /* Mailbox 12 Transmit Request Set */ +#define TRS13 0x2000 /* Mailbox 13 Transmit Request Set */ +#define TRS14 0x4000 /* Mailbox 14 Transmit Request Set */ +#define TRS15 0x8000 /* Mailbox 15 Transmit Request Set */ + +/* Bit masks for CAN0_TRS2 */ + +#define TRS16 0x1 /* Mailbox 16 Transmit Request Set */ +#define TRS17 0x2 /* Mailbox 17 Transmit Request Set */ +#define TRS18 0x4 /* Mailbox 18 Transmit Request Set */ +#define TRS19 0x8 /* Mailbox 19 Transmit Request Set */ +#define TRS20 0x10 /* Mailbox 20 Transmit Request Set */ +#define TRS21 0x20 /* Mailbox 21 Transmit Request Set */ +#define TRS22 0x40 /* Mailbox 22 Transmit Request Set */ +#define TRS23 0x80 /* Mailbox 23 Transmit Request Set */ +#define TRS24 0x100 /* Mailbox 24 Transmit Request Set */ +#define TRS25 0x200 /* Mailbox 25 Transmit Request Set */ +#define TRS26 0x400 /* Mailbox 26 Transmit Request Set */ +#define TRS27 0x800 /* Mailbox 27 Transmit Request Set */ +#define TRS28 0x1000 /* Mailbox 28 Transmit Request Set */ +#define TRS29 0x2000 /* Mailbox 29 Transmit Request Set */ +#define TRS30 0x4000 /* Mailbox 30 Transmit Request Set */ +#define TRS31 0x8000 /* Mailbox 31 Transmit Request Set */ + +/* Bit masks for CAN0_TRR1 */ + +#define TRR0 0x1 /* Mailbox 0 Transmit Request Reset */ +#define TRR1 0x2 /* Mailbox 1 Transmit Request Reset */ +#define TRR2 0x4 /* Mailbox 2 Transmit Request Reset */ +#define TRR3 0x8 /* Mailbox 3 Transmit Request Reset */ +#define TRR4 0x10 /* Mailbox 4 Transmit Request Reset */ +#define TRR5 0x20 /* Mailbox 5 Transmit Request Reset */ +#define TRR6 0x40 /* Mailbox 6 Transmit Request Reset */ +#define TRR7 0x80 /* Mailbox 7 Transmit Request Reset */ +#define TRR8 0x100 /* Mailbox 8 Transmit Request Reset */ +#define TRR9 0x200 /* Mailbox 9 Transmit Request Reset */ +#define TRR10 0x400 /* Mailbox 10 Transmit Request Reset */ +#define TRR11 0x800 /* Mailbox 11 Transmit Request Reset */ +#define TRR12 0x1000 /* Mailbox 12 Transmit Request Reset */ +#define TRR13 0x2000 /* Mailbox 13 Transmit Request Reset */ +#define TRR14 0x4000 /* Mailbox 14 Transmit Request Reset */ +#define TRR15 0x8000 /* Mailbox 15 Transmit Request Reset */ + +/* Bit masks for CAN0_TRR2 */ + +#define TRR16 0x1 /* Mailbox 16 Transmit Request Reset */ +#define TRR17 0x2 /* Mailbox 17 Transmit Request Reset */ +#define TRR18 0x4 /* Mailbox 18 Transmit Request Reset */ +#define TRR19 0x8 /* Mailbox 19 Transmit Request Reset */ +#define TRR20 0x10 /* Mailbox 20 Transmit Request Reset */ +#define TRR21 0x20 /* Mailbox 21 Transmit Request Reset */ +#define TRR22 0x40 /* Mailbox 22 Transmit Request Reset */ +#define TRR23 0x80 /* Mailbox 23 Transmit Request Reset */ +#define TRR24 0x100 /* Mailbox 24 Transmit Request Reset */ +#define TRR25 0x200 /* Mailbox 25 Transmit Request Reset */ +#define TRR26 0x400 /* Mailbox 26 Transmit Request Reset */ +#define TRR27 0x800 /* Mailbox 27 Transmit Request Reset */ +#define TRR28 0x1000 /* Mailbox 28 Transmit Request Reset */ +#define TRR29 0x2000 /* Mailbox 29 Transmit Request Reset */ +#define TRR30 0x4000 /* Mailbox 30 Transmit Request Reset */ +#define TRR31 0x8000 /* Mailbox 31 Transmit Request Reset */ + +/* Bit masks for CAN0_AA1 */ + +#define AA0 0x1 /* Mailbox 0 Abort Acknowledge */ +#define AA1 0x2 /* Mailbox 1 Abort Acknowledge */ +#define AA2 0x4 /* Mailbox 2 Abort Acknowledge */ +#define AA3 0x8 /* Mailbox 3 Abort Acknowledge */ +#define AA4 0x10 /* Mailbox 4 Abort Acknowledge */ +#define AA5 0x20 /* Mailbox 5 Abort Acknowledge */ +#define AA6 0x40 /* Mailbox 6 Abort Acknowledge */ +#define AA7 0x80 /* Mailbox 7 Abort Acknowledge */ +#define AA8 0x100 /* Mailbox 8 Abort Acknowledge */ +#define AA9 0x200 /* Mailbox 9 Abort Acknowledge */ +#define AA10 0x400 /* Mailbox 10 Abort Acknowledge */ +#define AA11 0x800 /* Mailbox 11 Abort Acknowledge */ +#define AA12 0x1000 /* Mailbox 12 Abort Acknowledge */ +#define AA13 0x2000 /* Mailbox 13 Abort Acknowledge */ +#define AA14 0x4000 /* Mailbox 14 Abort Acknowledge */ +#define AA15 0x8000 /* Mailbox 15 Abort Acknowledge */ + +/* Bit masks for CAN0_AA2 */ + +#define AA16 0x1 /* Mailbox 16 Abort Acknowledge */ +#define AA17 0x2 /* Mailbox 17 Abort Acknowledge */ +#define AA18 0x4 /* Mailbox 18 Abort Acknowledge */ +#define AA19 0x8 /* Mailbox 19 Abort Acknowledge */ +#define AA20 0x10 /* Mailbox 20 Abort Acknowledge */ +#define AA21 0x20 /* Mailbox 21 Abort Acknowledge */ +#define AA22 0x40 /* Mailbox 22 Abort Acknowledge */ +#define AA23 0x80 /* Mailbox 23 Abort Acknowledge */ +#define AA24 0x100 /* Mailbox 24 Abort Acknowledge */ +#define AA25 0x200 /* Mailbox 25 Abort Acknowledge */ +#define AA26 0x400 /* Mailbox 26 Abort Acknowledge */ +#define AA27 0x800 /* Mailbox 27 Abort Acknowledge */ +#define AA28 0x1000 /* Mailbox 28 Abort Acknowledge */ +#define AA29 0x2000 /* Mailbox 29 Abort Acknowledge */ +#define AA30 0x4000 /* Mailbox 30 Abort Acknowledge */ +#define AA31 0x8000 /* Mailbox 31 Abort Acknowledge */ + +/* Bit masks for CAN0_TA1 */ + +#define TA0 0x1 /* Mailbox 0 Transmit Acknowledge */ +#define TA1 0x2 /* Mailbox 1 Transmit Acknowledge */ +#define TA2 0x4 /* Mailbox 2 Transmit Acknowledge */ +#define TA3 0x8 /* Mailbox 3 Transmit Acknowledge */ +#define TA4 0x10 /* Mailbox 4 Transmit Acknowledge */ +#define TA5 0x20 /* Mailbox 5 Transmit Acknowledge */ +#define TA6 0x40 /* Mailbox 6 Transmit Acknowledge */ +#define TA7 0x80 /* Mailbox 7 Transmit Acknowledge */ +#define TA8 0x100 /* Mailbox 8 Transmit Acknowledge */ +#define TA9 0x200 /* Mailbox 9 Transmit Acknowledge */ +#define TA10 0x400 /* Mailbox 10 Transmit Acknowledge */ +#define TA11 0x800 /* Mailbox 11 Transmit Acknowledge */ +#define TA12 0x1000 /* Mailbox 12 Transmit Acknowledge */ +#define TA13 0x2000 /* Mailbox 13 Transmit Acknowledge */ +#define TA14 0x4000 /* Mailbox 14 Transmit Acknowledge */ +#define TA15 0x8000 /* Mailbox 15 Transmit Acknowledge */ + +/* Bit masks for CAN0_TA2 */ + +#define TA16 0x1 /* Mailbox 16 Transmit Acknowledge */ +#define TA17 0x2 /* Mailbox 17 Transmit Acknowledge */ +#define TA18 0x4 /* Mailbox 18 Transmit Acknowledge */ +#define TA19 0x8 /* Mailbox 19 Transmit Acknowledge */ +#define TA20 0x10 /* Mailbox 20 Transmit Acknowledge */ +#define TA21 0x20 /* Mailbox 21 Transmit Acknowledge */ +#define TA22 0x40 /* Mailbox 22 Transmit Acknowledge */ +#define TA23 0x80 /* Mailbox 23 Transmit Acknowledge */ +#define TA24 0x100 /* Mailbox 24 Transmit Acknowledge */ +#define TA25 0x200 /* Mailbox 25 Transmit Acknowledge */ +#define TA26 0x400 /* Mailbox 26 Transmit Acknowledge */ +#define TA27 0x800 /* Mailbox 27 Transmit Acknowledge */ +#define TA28 0x1000 /* Mailbox 28 Transmit Acknowledge */ +#define TA29 0x2000 /* Mailbox 29 Transmit Acknowledge */ +#define TA30 0x4000 /* Mailbox 30 Transmit Acknowledge */ +#define TA31 0x8000 /* Mailbox 31 Transmit Acknowledge */ + +/* Bit masks for CAN0_RFH1 */ + +#define RFH0 0x1 /* Mailbox 0 Remote Frame Handling Enable */ +#define RFH1 0x2 /* Mailbox 1 Remote Frame Handling Enable */ +#define RFH2 0x4 /* Mailbox 2 Remote Frame Handling Enable */ +#define RFH3 0x8 /* Mailbox 3 Remote Frame Handling Enable */ +#define RFH4 0x10 /* Mailbox 4 Remote Frame Handling Enable */ +#define RFH5 0x20 /* Mailbox 5 Remote Frame Handling Enable */ +#define RFH6 0x40 /* Mailbox 6 Remote Frame Handling Enable */ +#define RFH7 0x80 /* Mailbox 7 Remote Frame Handling Enable */ +#define RFH8 0x100 /* Mailbox 8 Remote Frame Handling Enable */ +#define RFH9 0x200 /* Mailbox 9 Remote Frame Handling Enable */ +#define RFH10 0x400 /* Mailbox 10 Remote Frame Handling Enable */ +#define RFH11 0x800 /* Mailbox 11 Remote Frame Handling Enable */ +#define RFH12 0x1000 /* Mailbox 12 Remote Frame Handling Enable */ +#define RFH13 0x2000 /* Mailbox 13 Remote Frame Handling Enable */ +#define RFH14 0x4000 /* Mailbox 14 Remote Frame Handling Enable */ +#define RFH15 0x8000 /* Mailbox 15 Remote Frame Handling Enable */ + +/* Bit masks for CAN0_RFH2 */ + +#define RFH16 0x1 /* Mailbox 16 Remote Frame Handling Enable */ +#define RFH17 0x2 /* Mailbox 17 Remote Frame Handling Enable */ +#define RFH18 0x4 /* Mailbox 18 Remote Frame Handling Enable */ +#define RFH19 0x8 /* Mailbox 19 Remote Frame Handling Enable */ +#define RFH20 0x10 /* Mailbox 20 Remote Frame Handling Enable */ +#define RFH21 0x20 /* Mailbox 21 Remote Frame Handling Enable */ +#define RFH22 0x40 /* Mailbox 22 Remote Frame Handling Enable */ +#define RFH23 0x80 /* Mailbox 23 Remote Frame Handling Enable */ +#define RFH24 0x100 /* Mailbox 24 Remote Frame Handling Enable */ +#define RFH25 0x200 /* Mailbox 25 Remote Frame Handling Enable */ +#define RFH26 0x400 /* Mailbox 26 Remote Frame Handling Enable */ +#define RFH27 0x800 /* Mailbox 27 Remote Frame Handling Enable */ +#define RFH28 0x1000 /* Mailbox 28 Remote Frame Handling Enable */ +#define RFH29 0x2000 /* Mailbox 29 Remote Frame Handling Enable */ +#define RFH30 0x4000 /* Mailbox 30 Remote Frame Handling Enable */ +#define RFH31 0x8000 /* Mailbox 31 Remote Frame Handling Enable */ + +/* Bit masks for CAN0_MBIM1 */ + +#define MBIM0 0x1 /* Mailbox 0 Mailbox Interrupt Mask */ +#define MBIM1 0x2 /* Mailbox 1 Mailbox Interrupt Mask */ +#define MBIM2 0x4 /* Mailbox 2 Mailbox Interrupt Mask */ +#define MBIM3 0x8 /* Mailbox 3 Mailbox Interrupt Mask */ +#define MBIM4 0x10 /* Mailbox 4 Mailbox Interrupt Mask */ +#define MBIM5 0x20 /* Mailbox 5 Mailbox Interrupt Mask */ +#define MBIM6 0x40 /* Mailbox 6 Mailbox Interrupt Mask */ +#define MBIM7 0x80 /* Mailbox 7 Mailbox Interrupt Mask */ +#define MBIM8 0x100 /* Mailbox 8 Mailbox Interrupt Mask */ +#define MBIM9 0x200 /* Mailbox 9 Mailbox Interrupt Mask */ +#define MBIM10 0x400 /* Mailbox 10 Mailbox Interrupt Mask */ +#define MBIM11 0x800 /* Mailbox 11 Mailbox Interrupt Mask */ +#define MBIM12 0x1000 /* Mailbox 12 Mailbox Interrupt Mask */ +#define MBIM13 0x2000 /* Mailbox 13 Mailbox Interrupt Mask */ +#define MBIM14 0x4000 /* Mailbox 14 Mailbox Interrupt Mask */ +#define MBIM15 0x8000 /* Mailbox 15 Mailbox Interrupt Mask */ + +/* Bit masks for CAN0_MBIM2 */ + +#define MBIM16 0x1 /* Mailbox 16 Mailbox Interrupt Mask */ +#define MBIM17 0x2 /* Mailbox 17 Mailbox Interrupt Mask */ +#define MBIM18 0x4 /* Mailbox 18 Mailbox Interrupt Mask */ +#define MBIM19 0x8 /* Mailbox 19 Mailbox Interrupt Mask */ +#define MBIM20 0x10 /* Mailbox 20 Mailbox Interrupt Mask */ +#define MBIM21 0x20 /* Mailbox 21 Mailbox Interrupt Mask */ +#define MBIM22 0x40 /* Mailbox 22 Mailbox Interrupt Mask */ +#define MBIM23 0x80 /* Mailbox 23 Mailbox Interrupt Mask */ +#define MBIM24 0x100 /* Mailbox 24 Mailbox Interrupt Mask */ +#define MBIM25 0x200 /* Mailbox 25 Mailbox Interrupt Mask */ +#define MBIM26 0x400 /* Mailbox 26 Mailbox Interrupt Mask */ +#define MBIM27 0x800 /* Mailbox 27 Mailbox Interrupt Mask */ +#define MBIM28 0x1000 /* Mailbox 28 Mailbox Interrupt Mask */ +#define MBIM29 0x2000 /* Mailbox 29 Mailbox Interrupt Mask */ +#define MBIM30 0x4000 /* Mailbox 30 Mailbox Interrupt Mask */ +#define MBIM31 0x8000 /* Mailbox 31 Mailbox Interrupt Mask */ + +/* Bit masks for CAN0_MBTIF1 */ + +#define MBTIF0 0x1 /* Mailbox 0 Mailbox Transmit Interrupt Flag */ +#define MBTIF1 0x2 /* Mailbox 1 Mailbox Transmit Interrupt Flag */ +#define MBTIF2 0x4 /* Mailbox 2 Mailbox Transmit Interrupt Flag */ +#define MBTIF3 0x8 /* Mailbox 3 Mailbox Transmit Interrupt Flag */ +#define MBTIF4 0x10 /* Mailbox 4 Mailbox Transmit Interrupt Flag */ +#define MBTIF5 0x20 /* Mailbox 5 Mailbox Transmit Interrupt Flag */ +#define MBTIF6 0x40 /* Mailbox 6 Mailbox Transmit Interrupt Flag */ +#define MBTIF7 0x80 /* Mailbox 7 Mailbox Transmit Interrupt Flag */ +#define MBTIF8 0x100 /* Mailbox 8 Mailbox Transmit Interrupt Flag */ +#define MBTIF9 0x200 /* Mailbox 9 Mailbox Transmit Interrupt Flag */ +#define MBTIF10 0x400 /* Mailbox 10 Mailbox Transmit Interrupt Flag */ +#define MBTIF11 0x800 /* Mailbox 11 Mailbox Transmit Interrupt Flag */ +#define MBTIF12 0x1000 /* Mailbox 12 Mailbox Transmit Interrupt Flag */ +#define MBTIF13 0x2000 /* Mailbox 13 Mailbox Transmit Interrupt Flag */ +#define MBTIF14 0x4000 /* Mailbox 14 Mailbox Transmit Interrupt Flag */ +#define MBTIF15 0x8000 /* Mailbox 15 Mailbox Transmit Interrupt Flag */ + +/* Bit masks for CAN0_MBTIF2 */ + +#define MBTIF16 0x1 /* Mailbox 16 Mailbox Transmit Interrupt Flag */ +#define MBTIF17 0x2 /* Mailbox 17 Mailbox Transmit Interrupt Flag */ +#define MBTIF18 0x4 /* Mailbox 18 Mailbox Transmit Interrupt Flag */ +#define MBTIF19 0x8 /* Mailbox 19 Mailbox Transmit Interrupt Flag */ +#define MBTIF20 0x10 /* Mailbox 20 Mailbox Transmit Interrupt Flag */ +#define MBTIF21 0x20 /* Mailbox 21 Mailbox Transmit Interrupt Flag */ +#define MBTIF22 0x40 /* Mailbox 22 Mailbox Transmit Interrupt Flag */ +#define MBTIF23 0x80 /* Mailbox 23 Mailbox Transmit Interrupt Flag */ +#define MBTIF24 0x100 /* Mailbox 24 Mailbox Transmit Interrupt Flag */ +#define MBTIF25 0x200 /* Mailbox 25 Mailbox Transmit Interrupt Flag */ +#define MBTIF26 0x400 /* Mailbox 26 Mailbox Transmit Interrupt Flag */ +#define MBTIF27 0x800 /* Mailbox 27 Mailbox Transmit Interrupt Flag */ +#define MBTIF28 0x1000 /* Mailbox 28 Mailbox Transmit Interrupt Flag */ +#define MBTIF29 0x2000 /* Mailbox 29 Mailbox Transmit Interrupt Flag */ +#define MBTIF30 0x4000 /* Mailbox 30 Mailbox Transmit Interrupt Flag */ +#define MBTIF31 0x8000 /* Mailbox 31 Mailbox Transmit Interrupt Flag */ + +/* Bit masks for CAN0_MBRIF1 */ + +#define MBRIF0 0x1 /* Mailbox 0 Mailbox Receive Interrupt Flag */ +#define MBRIF1 0x2 /* Mailbox 1 Mailbox Receive Interrupt Flag */ +#define MBRIF2 0x4 /* Mailbox 2 Mailbox Receive Interrupt Flag */ +#define MBRIF3 0x8 /* Mailbox 3 Mailbox Receive Interrupt Flag */ +#define MBRIF4 0x10 /* Mailbox 4 Mailbox Receive Interrupt Flag */ +#define MBRIF5 0x20 /* Mailbox 5 Mailbox Receive Interrupt Flag */ +#define MBRIF6 0x40 /* Mailbox 6 Mailbox Receive Interrupt Flag */ +#define MBRIF7 0x80 /* Mailbox 7 Mailbox Receive Interrupt Flag */ +#define MBRIF8 0x100 /* Mailbox 8 Mailbox Receive Interrupt Flag */ +#define MBRIF9 0x200 /* Mailbox 9 Mailbox Receive Interrupt Flag */ +#define MBRIF10 0x400 /* Mailbox 10 Mailbox Receive Interrupt Flag */ +#define MBRIF11 0x800 /* Mailbox 11 Mailbox Receive Interrupt Flag */ +#define MBRIF12 0x1000 /* Mailbox 12 Mailbox Receive Interrupt Flag */ +#define MBRIF13 0x2000 /* Mailbox 13 Mailbox Receive Interrupt Flag */ +#define MBRIF14 0x4000 /* Mailbox 14 Mailbox Receive Interrupt Flag */ +#define MBRIF15 0x8000 /* Mailbox 15 Mailbox Receive Interrupt Flag */ + +/* Bit masks for CAN0_MBRIF2 */ + +#define MBRIF16 0x1 /* Mailbox 16 Mailbox Receive Interrupt Flag */ +#define MBRIF17 0x2 /* Mailbox 17 Mailbox Receive Interrupt Flag */ +#define MBRIF18 0x4 /* Mailbox 18 Mailbox Receive Interrupt Flag */ +#define MBRIF19 0x8 /* Mailbox 19 Mailbox Receive Interrupt Flag */ +#define MBRIF20 0x10 /* Mailbox 20 Mailbox Receive Interrupt Flag */ +#define MBRIF21 0x20 /* Mailbox 21 Mailbox Receive Interrupt Flag */ +#define MBRIF22 0x40 /* Mailbox 22 Mailbox Receive Interrupt Flag */ +#define MBRIF23 0x80 /* Mailbox 23 Mailbox Receive Interrupt Flag */ +#define MBRIF24 0x100 /* Mailbox 24 Mailbox Receive Interrupt Flag */ +#define MBRIF25 0x200 /* Mailbox 25 Mailbox Receive Interrupt Flag */ +#define MBRIF26 0x400 /* Mailbox 26 Mailbox Receive Interrupt Flag */ +#define MBRIF27 0x800 /* Mailbox 27 Mailbox Receive Interrupt Flag */ +#define MBRIF28 0x1000 /* Mailbox 28 Mailbox Receive Interrupt Flag */ +#define MBRIF29 0x2000 /* Mailbox 29 Mailbox Receive Interrupt Flag */ +#define MBRIF30 0x4000 /* Mailbox 30 Mailbox Receive Interrupt Flag */ +#define MBRIF31 0x8000 /* Mailbox 31 Mailbox Receive Interrupt Flag */ + +/* Bit masks for EPPIx_STATUS */ + +#define CFIFO_ERR 0x1 /* Chroma FIFO Error */ +#define YFIFO_ERR 0x2 /* Luma FIFO Error */ +#define LTERR_OVR 0x4 /* Line Track Overflow */ +#define LTERR_UNDR 0x8 /* Line Track Underflow */ +#define FTERR_OVR 0x10 /* Frame Track Overflow */ +#define FTERR_UNDR 0x20 /* Frame Track Underflow */ +#define ERR_NCOR 0x40 /* Preamble Error Not Corrected */ +#define DMA1URQ 0x80 /* DMA1 Urgent Request */ +#define DMA0URQ 0x100 /* DMA0 Urgent Request */ +#define ERR_DET 0x4000 /* Preamble Error Detected */ +#define FLD 0x8000 /* Field */ + +/* Bit masks for EPPIx_CONTROL */ + +#define EPPI_EN 0x1 /* Enable */ +#define EPPI_DIR 0x2 /* Direction */ +#define XFR_TYPE 0xc /* Operating Mode */ +#define FS_CFG 0x30 /* Frame Sync Configuration */ +#define FLD_SEL 0x40 /* Field Select/Trigger */ +#define ITU_TYPE 0x80 /* ITU Interlaced or Progressive */ +#define BLANKGEN 0x100 /* ITU Output Mode with Internal Blanking Generation */ +#define ICLKGEN 0x200 /* Internal Clock Generation */ +#define IFSGEN 0x400 /* Internal Frame Sync Generation */ +#define POLC 0x1800 /* Frame Sync and Data Driving/Sampling Edges */ +#define POLS 0x6000 /* Frame Sync Polarity */ +#define DLENGTH 0x38000 /* Data Length */ +#define SKIP_EN 0x40000 /* Skip Enable */ +#define SKIP_EO 0x80000 /* Skip Even or Odd */ +#define PACKEN 0x100000 /* Packing/Unpacking Enable */ +#define SWAPEN 0x200000 /* Swap Enable */ +#define SIGN_EXT 0x400000 /* Sign Extension or Zero-filled / Data Split Format */ +#define SPLT_EVEN_ODD 0x800000 /* Split Even and Odd Data Samples */ +#define SUBSPLT_ODD 0x1000000 /* Sub-split Odd Samples */ +#define DMACFG 0x2000000 /* One or Two DMA Channels Mode */ +#define RGB_FMT_EN 0x4000000 /* RGB Formatting Enable */ +#define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */ +#define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */ + +#define DLEN_8 (0 << 15) /* 000 - 8 bits */ +#define DLEN_10 (1 << 15) /* 001 - 10 bits */ +#define DLEN_12 (2 << 15) /* 010 - 12 bits */ +#define DLEN_14 (3 << 15) /* 011 - 14 bits */ +#define DLEN_16 (4 << 15) /* 100 - 16 bits */ +#define DLEN_18 (5 << 15) /* 101 - 18 bits */ +#define DLEN_24 (6 << 15) /* 110 - 24 bits */ + + +/* Bit masks for EPPIx_FS2W_LVB */ + +#define F1VB_BD 0xff /* Vertical Blanking before Field 1 Active Data */ +#define F1VB_AD 0xff00 /* Vertical Blanking after Field 1 Active Data */ +#define F2VB_BD 0xff0000 /* Vertical Blanking before Field 2 Active Data */ +#define F2VB_AD 0xff000000 /* Vertical Blanking after Field 2 Active Data */ + +/* Bit masks for EPPIx_FS2W_LAVF */ + +#define F1_ACT 0xffff /* Number of Lines of Active Data in Field 1 */ +#define F2_ACT 0xffff0000 /* Number of Lines of Active Data in Field 2 */ + +/* Bit masks for EPPIx_CLIP */ + +#define LOW_ODD 0xff /* Lower Limit for Odd Bytes (Chroma) */ +#define HIGH_ODD 0xff00 /* Upper Limit for Odd Bytes (Chroma) */ +#define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */ +#define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */ + +/* Bit masks for SPIx_BAUD */ + +#define SPI_BAUD 0xffff /* Baud Rate */ + +/* Bit masks for SPIx_CTL */ + +#define SPE 0x4000 /* SPI Enable */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define MSTR 0x1000 /* Master Mode */ +#define CPOL 0x800 /* Clock Polarity */ +#define CPHA 0x400 /* Clock Phase */ +#define LSBF 0x200 /* LSB First */ +#define SIZE 0x100 /* Size of Words */ +#define EMISO 0x20 /* Enable MISO Output */ +#define PSSE 0x10 /* Slave-Select Enable */ +#define GM 0x8 /* Get More Data */ +#define SZ 0x4 /* Send Zero */ +#define TIMOD 0x3 /* Transfer Initiation Mode */ + +/* Bit masks for SPIx_FLG */ + +#define FLS1 0x2 /* Slave Select Enable 1 */ +#define FLS2 0x4 /* Slave Select Enable 2 */ +#define FLS3 0x8 /* Slave Select Enable 3 */ +#define FLG1 0x200 /* Slave Select Value 1 */ +#define FLG2 0x400 /* Slave Select Value 2 */ +#define FLG3 0x800 /* Slave Select Value 3 */ + +/* Bit masks for SPIx_STAT */ + +#define TXCOL 0x40 /* Transmit Collision Error */ +#define RXS 0x20 /* RDBR Data Buffer Status */ +#define RBSY 0x10 /* Receive Error */ +#define TXS 0x8 /* TDBR Data Buffer Status */ +#define TXE 0x4 /* Transmission Error */ +#define MODF 0x2 /* Mode Fault Error */ +#define SPIF 0x1 /* SPI Finished */ + +/* Bit masks for SPIx_TDBR */ + +#define TDBR 0xffff /* Transmit Data Buffer */ + +/* Bit masks for SPIx_RDBR */ + +#define RDBR 0xffff /* Receive Data Buffer */ + +/* Bit masks for SPIx_SHADOW */ + +#define SHADOW 0xffff /* RDBR Shadow */ + +/* ************************************************ */ +/* The TWI bit masks fields are from the ADSP-BF538 */ +/* and they have not been verified as the final */ +/* ones for the Moab processors ... bz 1/19/2007 */ +/* ************************************************ */ + +/* Bit masks for TWIx_CONTROL */ + +#define PRESCALE 0x7f /* Prescale Value */ +#define TWI_ENA 0x80 /* TWI Enable */ +#define SCCB 0x200 /* Serial Camera Control Bus */ + +/* Bit maskes for TWIx_CLKDIV */ + +#define CLKLOW 0xff /* Clock Low */ +#define CLKHI 0xff00 /* Clock High */ + +/* Bit maskes for TWIx_SLAVE_CTL */ + +#define SEN 0x1 /* Slave Enable */ +#define STDVAL 0x4 /* Slave Transmit Data Valid */ +#define NAK 0x8 /* Not Acknowledge */ +#define GEN 0x10 /* General Call Enable */ + +/* Bit maskes for TWIx_SLAVE_ADDR */ + +#define SADDR 0x7f /* Slave Mode Address */ + +/* Bit maskes for TWIx_SLAVE_STAT */ + +#define SDIR 0x1 /* Slave Transfer Direction */ +#define GCALL 0x2 /* General Call */ + +/* Bit maskes for TWIx_MASTER_CTL */ + +#define MEN 0x1 /* Master Mode Enable */ +#define MDIR 0x4 /* Master Transfer Direction */ +#define FAST 0x8 /* Fast Mode */ +#define STOP 0x10 /* Issue Stop Condition */ +#define RSTART 0x20 /* Repeat Start */ +#define DCNT 0x3fc0 /* Data Transfer Count */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* Bit maskes for TWIx_MASTER_ADDR */ + +#define MADDR 0x7f /* Master Mode Address */ + +/* Bit maskes for TWIx_MASTER_STAT */ + +#define MPROG 0x1 /* Master Transfer in Progress */ +#define LOSTARB 0x2 /* Lost Arbitration */ +#define ANAK 0x4 /* Address Not Acknowledged */ +#define DNAK 0x8 /* Data Not Acknowledged */ +#define BUFRDERR 0x10 /* Buffer Read Error */ +#define BUFWRERR 0x20 /* Buffer Write Error */ +#define SDASEN 0x40 /* Serial Data Sense */ +#define SCLSEN 0x80 /* Serial Clock Sense */ +#define BUSBUSY 0x100 /* Bus Busy */ + +/* Bit maskes for TWIx_FIFO_CTL */ + +#define XMTFLUSH 0x1 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x2 /* Receive Buffer Flush */ +#define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */ + +/* Bit maskes for TWIx_FIFO_STAT */ + +#define XMTSTAT 0x3 /* Transmit FIFO Status */ +#define RCVSTAT 0xc /* Receive FIFO Status */ + +/* Bit maskes for TWIx_INT_MASK */ + +#define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */ +#define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */ +#define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */ +#define SOVFM 0x8 /* Slave Overflow Interrupt Mask */ +#define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */ +#define MERRM 0x20 /* Master Transfer Error Interrupt Mask */ +#define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */ +#define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */ + +/* Bit maskes for TWIx_INT_STAT */ + +#define SINIT 0x1 /* Slave Transfer Initiated */ +#define SCOMP 0x2 /* Slave Transfer Complete */ +#define SERR 0x4 /* Slave Transfer Error */ +#define SOVF 0x8 /* Slave Overflow */ +#define MCOMP 0x10 /* Master Transfer Complete */ +#define MERR 0x20 /* Master Transfer Error */ +#define XMTSERV 0x40 /* Transmit FIFO Service */ +#define RCVSERV 0x80 /* Receive FIFO Service */ + +/* Bit maskes for TWIx_XMT_DATA8 */ + +#define XMTDATA8 0xff /* Transmit FIFO 8-Bit Data */ + +/* Bit maskes for TWIx_XMT_DATA16 */ + +#define XMTDATA16 0xffff /* Transmit FIFO 16-Bit Data */ + +/* Bit maskes for TWIx_RCV_DATA8 */ + +#define RCVDATA8 0xff /* Receive FIFO 8-Bit Data */ + +/* Bit maskes for TWIx_RCV_DATA16 */ + +#define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ + +/* Bit masks for SPORTx_TCR1 */ + +#define TCKFE 0x4000 /* Clock Falling Edge Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */ +#define TFSR 0x400 /* Transmit Frame Sync Required Select */ +#define ITFS 0x200 /* Internal Transmit Frame Sync Select */ +#define TLSBIT 0x10 /* Transmit Bit Order */ +#define TDTYPE 0xc /* Data Formatting Type Select */ +#define ITCLK 0x2 /* Internal Transmit Clock Select */ +#define TSPEN 0x1 /* Transmit Enable */ + +/* Bit masks for SPORTx_TCR2 */ + +#define TRFST 0x400 /* Left/Right Order */ +#define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */ +#define TXSE 0x100 /* TxSEC Enable */ +#define SLEN_T 0x1f /* SPORT Word Length */ + +/* Bit masks for SPORTx_RCR1 */ + +#define RCKFE 0x4000 /* Clock Falling Edge Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define RFSR 0x400 /* Receive Frame Sync Required Select */ +#define IRFS 0x200 /* Internal Receive Frame Sync Select */ +#define RLSBIT 0x10 /* Receive Bit Order */ +#define RDTYPE 0xc /* Data Formatting Type Select */ +#define IRCLK 0x2 /* Internal Receive Clock Select */ +#define RSPEN 0x1 /* Receive Enable */ + +/* Bit masks for SPORTx_RCR2 */ + +#define RRFST 0x400 /* Left/Right Order */ +#define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */ +#define RXSE 0x100 /* RxSEC Enable */ +#define SLEN_R 0x1f /* SPORT Word Length */ + +/* Bit masks for SPORTx_STAT */ + +#define TXHRE 0x40 /* Transmit Hold Register Empty */ +#define TOVF 0x20 /* Sticky Transmit Overflow Status */ +#define TUVF 0x10 /* Sticky Transmit Underflow Status */ +#define TXF 0x8 /* Transmit FIFO Full Status */ +#define ROVF 0x4 /* Sticky Receive Overflow Status */ +#define RUVF 0x2 /* Sticky Receive Underflow Status */ +#define RXNE 0x1 /* Receive FIFO Not Empty Status */ + +/* Bit masks for SPORTx_MCMC1 */ + +#define SP_WSIZE 0xf000 /* Window Size */ +#define SP_WOFF 0x3ff /* Windows Offset */ + +/* Bit masks for SPORTx_MCMC2 */ + +#define MFD 0xf000 /* Multi channel Frame Delay */ +#define FSDR 0x80 /* Frame Sync to Data Relationship */ +#define MCMEN 0x10 /* Multi channel Frame Mode Enable */ +#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */ +#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */ +#define MCCRM 0x3 /* 2X Clock Recovery Mode */ + +/* Bit masks for SPORTx_CHNL */ + +#define CUR_CHNL 0x3ff /* Current Channel Indicator */ + +/* Bit masks for UARTx_LCR */ + +#if 0 +/* conflicts with legacy one in last section */ +#define WLS 0x3 /* Word Length Select */ +#endif +#define STB 0x4 /* Stop Bits */ +#define PEN 0x8 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Sticky Parity */ +#define SB 0x40 /* Set Break */ + +/* Bit masks for UARTx_MCR */ + +#define XOFF 0x1 /* Transmitter Off */ +#define MRTS 0x2 /* Manual Request To Send */ +#define RFIT 0x4 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x8 /* Receive FIFO RTS Threshold */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define FCPOL 0x20 /* Flow Control Pin Polarity */ +#define ARTS 0x40 /* Automatic Request To Send */ +#define ACTS 0x80 /* Automatic Clear To Send */ + +/* Bit masks for UARTx_LSR */ + +#define DR 0x1 /* Data Ready */ +#define OE 0x2 /* Overrun Error */ +#define PE 0x4 /* Parity Error */ +#define FE 0x8 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* Transmitter Empty */ +#define TFI 0x80 /* Transmission Finished Indicator */ + +/* Bit masks for UARTx_MSR */ + +#define SCTS 0x1 /* Sticky CTS */ +#define CTS 0x10 /* Clear To Send */ +#define RFCS 0x20 /* Receive FIFO Count Status */ + +/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */ + +#define ERBFI 0x1 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x2 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x4 /* Enable Receive Status Interrupt */ +#define EDSSI 0x8 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +/* Bit masks for UARTx_GCTL */ + +#define UCEN 0x1 /* UART Enable */ +#define IREN 0x2 /* IrDA Mode Enable */ +#define TPOLC 0x4 /* IrDA TX Polarity Change */ +#define RPOLC 0x8 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error */ +#define FFE 0x20 /* Force Framing Error */ +#define EDBO 0x40 /* Enable Divide-by-One */ +#define EGLSI 0x80 /* Enable Global LS Interrupt */ + + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +/* BCODE bit field options (SYSCFG register) */ + +#define BCODE_WAKEUP 0x0000 /* boot according to wake-up condition */ +#define BCODE_FULLBOOT 0x0010 /* always perform full boot */ +#define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */ +#define BCODE_NOBOOT 0x0030 /* always perform full boot */ + +/* CNT_COMMAND bit field options */ + +#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_CONFIG bit field options */ + +#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ +#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ +#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ +#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ +#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ + +#define BNDMODE_COMP 0x0000 /* boundary compare mode */ +#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ +#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ +#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ + +/* TMODE in TIMERx_CONFIG bit field options */ + +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 + +/* UARTx_LCR bit field options */ + +#define WLS_5 0x0000 /* 5 data bits */ +#define WLS_6 0x0001 /* 6 data bits */ +#define WLS_7 0x0002 /* 7 data bits */ +#define WLS_8 0x0003 /* 8 data bits */ + +/* PINTx Register Bit Definitions */ + +#define PIQ0 0x00000001 +#define PIQ1 0x00000002 +#define PIQ2 0x00000004 +#define PIQ3 0x00000008 + +#define PIQ4 0x00000010 +#define PIQ5 0x00000020 +#define PIQ6 0x00000040 +#define PIQ7 0x00000080 + +#define PIQ8 0x00000100 +#define PIQ9 0x00000200 +#define PIQ10 0x00000400 +#define PIQ11 0x00000800 + +#define PIQ12 0x00001000 +#define PIQ13 0x00002000 +#define PIQ14 0x00004000 +#define PIQ15 0x00008000 + +#define PIQ16 0x00010000 +#define PIQ17 0x00020000 +#define PIQ18 0x00040000 +#define PIQ19 0x00080000 + +#define PIQ20 0x00100000 +#define PIQ21 0x00200000 +#define PIQ22 0x00400000 +#define PIQ23 0x00800000 + +#define PIQ24 0x01000000 +#define PIQ25 0x02000000 +#define PIQ26 0x04000000 +#define PIQ27 0x08000000 + +#define PIQ28 0x10000000 +#define PIQ29 0x20000000 +#define PIQ30 0x40000000 +#define PIQ31 0x80000000 + +/* PORT A Bit Definitions for the registers +PORTA, PORTA_SET, PORTA_CLEAR, +PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN, +PORTA_FER registers +*/ + +#define PA0 0x0001 +#define PA1 0x0002 +#define PA2 0x0004 +#define PA3 0x0008 +#define PA4 0x0010 +#define PA5 0x0020 +#define PA6 0x0040 +#define PA7 0x0080 +#define PA8 0x0100 +#define PA9 0x0200 +#define PA10 0x0400 +#define PA11 0x0800 +#define PA12 0x1000 +#define PA13 0x2000 +#define PA14 0x4000 +#define PA15 0x8000 + +/* PORT B Bit Definitions for the registers +PORTB, PORTB_SET, PORTB_CLEAR, +PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN, +PORTB_FER registers +*/ + +#define PB0 0x0001 +#define PB1 0x0002 +#define PB2 0x0004 +#define PB3 0x0008 +#define PB4 0x0010 +#define PB5 0x0020 +#define PB6 0x0040 +#define PB7 0x0080 +#define PB8 0x0100 +#define PB9 0x0200 +#define PB10 0x0400 +#define PB11 0x0800 +#define PB12 0x1000 +#define PB13 0x2000 +#define PB14 0x4000 + + +/* PORT C Bit Definitions for the registers +PORTC, PORTC_SET, PORTC_CLEAR, +PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN, +PORTC_FER registers +*/ + + +#define PC0 0x0001 +#define PC1 0x0002 +#define PC2 0x0004 +#define PC3 0x0008 +#define PC4 0x0010 +#define PC5 0x0020 +#define PC6 0x0040 +#define PC7 0x0080 +#define PC8 0x0100 +#define PC9 0x0200 +#define PC10 0x0400 +#define PC11 0x0800 +#define PC12 0x1000 +#define PC13 0x2000 + + +/* PORT D Bit Definitions for the registers +PORTD, PORTD_SET, PORTD_CLEAR, +PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN, +PORTD_FER registers +*/ + +#define PD0 0x0001 +#define PD1 0x0002 +#define PD2 0x0004 +#define PD3 0x0008 +#define PD4 0x0010 +#define PD5 0x0020 +#define PD6 0x0040 +#define PD7 0x0080 +#define PD8 0x0100 +#define PD9 0x0200 +#define PD10 0x0400 +#define PD11 0x0800 +#define PD12 0x1000 +#define PD13 0x2000 +#define PD14 0x4000 +#define PD15 0x8000 + +/* PORT E Bit Definitions for the registers +PORTE, PORTE_SET, PORTE_CLEAR, +PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN, +PORTE_FER registers +*/ + + +#define PE0 0x0001 +#define PE1 0x0002 +#define PE2 0x0004 +#define PE3 0x0008 +#define PE4 0x0010 +#define PE5 0x0020 +#define PE6 0x0040 +#define PE7 0x0080 +#define PE8 0x0100 +#define PE9 0x0200 +#define PE10 0x0400 +#define PE11 0x0800 +#define PE12 0x1000 +#define PE13 0x2000 +#define PE14 0x4000 +#define PE15 0x8000 + +/* PORT F Bit Definitions for the registers +PORTF, PORTF_SET, PORTF_CLEAR, +PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN, +PORTF_FER registers +*/ + + +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* PORT G Bit Definitions for the registers +PORTG, PORTG_SET, PORTG_CLEAR, +PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN, +PORTG_FER registers +*/ + + +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* PORT H Bit Definitions for the registers +PORTH, PORTH_SET, PORTH_CLEAR, +PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN, +PORTH_FER registers +*/ + + +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 + + +/* PORT I Bit Definitions for the registers +PORTI, PORTI_SET, PORTI_CLEAR, +PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN, +PORTI_FER registers +*/ + + +#define PI0 0x0001 +#define PI1 0x0002 +#define PI2 0x0004 +#define PI3 0x0008 +#define PI4 0x0010 +#define PI5 0x0020 +#define PI6 0x0040 +#define PI7 0x0080 +#define PI8 0x0100 +#define PI9 0x0200 +#define PI10 0x0400 +#define PI11 0x0800 +#define PI12 0x1000 +#define PI13 0x2000 +#define PI14 0x4000 +#define PI15 0x8000 + +/* PORT J Bit Definitions for the registers +PORTJ, PORTJ_SET, PORTJ_CLEAR, +PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN, +PORTJ_FER registers +*/ + + +#define PJ0 0x0001 +#define PJ1 0x0002 +#define PJ2 0x0004 +#define PJ3 0x0008 +#define PJ4 0x0010 +#define PJ5 0x0020 +#define PJ6 0x0040 +#define PJ7 0x0080 +#define PJ8 0x0100 +#define PJ9 0x0200 +#define PJ10 0x0400 +#define PJ11 0x0800 +#define PJ12 0x1000 +#define PJ13 0x2000 + + +/* Port Muxing Bit Fields for PORTx_MUX Registers */ + +#define MUX0 0x00000003 +#define MUX0_0 0x00000000 +#define MUX0_1 0x00000001 +#define MUX0_2 0x00000002 +#define MUX0_3 0x00000003 + +#define MUX1 0x0000000C +#define MUX1_0 0x00000000 +#define MUX1_1 0x00000004 +#define MUX1_2 0x00000008 +#define MUX1_3 0x0000000C + +#define MUX2 0x00000030 +#define MUX2_0 0x00000000 +#define MUX2_1 0x00000010 +#define MUX2_2 0x00000020 +#define MUX2_3 0x00000030 + +#define MUX3 0x000000C0 +#define MUX3_0 0x00000000 +#define MUX3_1 0x00000040 +#define MUX3_2 0x00000080 +#define MUX3_3 0x000000C0 + +#define MUX4 0x00000300 +#define MUX4_0 0x00000000 +#define MUX4_1 0x00000100 +#define MUX4_2 0x00000200 +#define MUX4_3 0x00000300 + +#define MUX5 0x00000C00 +#define MUX5_0 0x00000000 +#define MUX5_1 0x00000400 +#define MUX5_2 0x00000800 +#define MUX5_3 0x00000C00 + +#define MUX6 0x00003000 +#define MUX6_0 0x00000000 +#define MUX6_1 0x00001000 +#define MUX6_2 0x00002000 +#define MUX6_3 0x00003000 + +#define MUX7 0x0000C000 +#define MUX7_0 0x00000000 +#define MUX7_1 0x00004000 +#define MUX7_2 0x00008000 +#define MUX7_3 0x0000C000 + +#define MUX8 0x00030000 +#define MUX8_0 0x00000000 +#define MUX8_1 0x00010000 +#define MUX8_2 0x00020000 +#define MUX8_3 0x00030000 + +#define MUX9 0x000C0000 +#define MUX9_0 0x00000000 +#define MUX9_1 0x00040000 +#define MUX9_2 0x00080000 +#define MUX9_3 0x000C0000 + +#define MUX10 0x00300000 +#define MUX10_0 0x00000000 +#define MUX10_1 0x00100000 +#define MUX10_2 0x00200000 +#define MUX10_3 0x00300000 + +#define MUX11 0x00C00000 +#define MUX11_0 0x00000000 +#define MUX11_1 0x00400000 +#define MUX11_2 0x00800000 +#define MUX11_3 0x00C00000 + +#define MUX12 0x03000000 +#define MUX12_0 0x00000000 +#define MUX12_1 0x01000000 +#define MUX12_2 0x02000000 +#define MUX12_3 0x03000000 + +#define MUX13 0x0C000000 +#define MUX13_0 0x00000000 +#define MUX13_1 0x04000000 +#define MUX13_2 0x08000000 +#define MUX13_3 0x0C000000 + +#define MUX14 0x30000000 +#define MUX14_0 0x00000000 +#define MUX14_1 0x10000000 +#define MUX14_2 0x20000000 +#define MUX14_3 0x30000000 + +#define MUX15 0xC0000000 +#define MUX15_0 0x00000000 +#define MUX15_1 0x40000000 +#define MUX15_2 0x80000000 +#define MUX15_3 0xC0000000 + +#define MUX(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0) \ + ((((b15)&3) << 30) | \ + (((b14)&3) << 28) | \ + (((b13)&3) << 26) | \ + (((b12)&3) << 24) | \ + (((b11)&3) << 22) | \ + (((b10)&3) << 20) | \ + (((b9) &3) << 18) | \ + (((b8) &3) << 16) | \ + (((b7) &3) << 14) | \ + (((b6) &3) << 12) | \ + (((b5) &3) << 10) | \ + (((b4) &3) << 8) | \ + (((b3) &3) << 6) | \ + (((b2) &3) << 4) | \ + (((b1) &3) << 2) | \ + (((b0) &3))) + +/* Bit fields for PINT0_ASSIGN and PINT1_ASSIGN registers */ + +#define B0MAP 0x000000FF /* Byte 0 Lower Half Port Mapping */ +#define B0MAP_PAL 0x00000000 /* Map Port A Low to Byte 0 */ +#define B0MAP_PBL 0x00000001 /* Map Port B Low to Byte 0 */ +#define B1MAP 0x0000FF00 /* Byte 1 Upper Half Port Mapping */ +#define B1MAP_PAH 0x00000000 /* Map Port A High to Byte 1 */ +#define B1MAP_PBH 0x00000100 /* Map Port B High to Byte 1 */ +#define B2MAP 0x00FF0000 /* Byte 2 Lower Half Port Mapping */ +#define B2MAP_PAL 0x00000000 /* Map Port A Low to Byte 2 */ +#define B2MAP_PBL 0x00010000 /* Map Port B Low to Byte 2 */ +#define B3MAP 0xFF000000 /* Byte 3 Upper Half Port Mapping */ +#define B3MAP_PAH 0x00000000 /* Map Port A High to Byte 3 */ +#define B3MAP_PBH 0x01000000 /* Map Port B High to Byte 3 */ + +/* Bit fields for PINT2_ASSIGN and PINT3_ASSIGN registers */ + +#define B0MAP_PCL 0x00000000 /* Map Port C Low to Byte 0 */ +#define B0MAP_PDL 0x00000001 /* Map Port D Low to Byte 0 */ +#define B0MAP_PEL 0x00000002 /* Map Port E Low to Byte 0 */ +#define B0MAP_PFL 0x00000003 /* Map Port F Low to Byte 0 */ +#define B0MAP_PGL 0x00000004 /* Map Port G Low to Byte 0 */ +#define B0MAP_PHL 0x00000005 /* Map Port H Low to Byte 0 */ +#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */ +#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */ + +#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */ +#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */ +#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */ +#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */ +#define B1MAP_PGH 0x00000400 /* Map Port G High to Byte 1 */ +#define B1MAP_PHH 0x00000500 /* Map Port H High to Byte 1 */ +#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */ +#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */ + +#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */ +#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */ +#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */ +#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */ +#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */ +#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */ +#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */ +#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */ + +#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */ +#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */ +#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */ +#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */ +#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */ +#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */ +#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */ +#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */ + + +/* for legacy compatibility */ + +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define W1LMAX_MAX W1LMAX_MIN +#define EBIU_AMCBCTL0 EBIU_AMBCTL0 +#define EBIU_AMCBCTL1 EBIU_AMBCTL1 +#define PINT0_IRQ PINT0_REQUEST +#define PINT1_IRQ PINT1_REQUEST +#define PINT2_IRQ PINT2_REQUEST +#define PINT3_IRQ PINT3_REQUEST + +#endif /* _DEF_BF54X_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h new file mode 100644 index 00000000000..36a2ef7e784 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/dma.h @@ -0,0 +1,76 @@ +/* + * file: include/asm-blackfin/mach-bf548/dma.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define CH_SPORT0_RX 0 +#define CH_SPORT0_TX 1 +#define CH_SPORT1_RX 2 +#define CH_SPORT1_TX 3 +#define CH_SPI0 4 +#define CH_SPI1 5 +#define CH_UART0_RX 6 +#define CH_UART0_TX 7 +#define CH_UART1_RX 8 +#define CH_UART1_TX 9 +#define CH_ATAPI_RX 10 +#define CH_ATAPI_TX 11 +#define CH_EPPI0 12 +#define CH_EPPI1 13 +#define CH_EPPI2 14 +#define CH_PIXC_IMAGE 15 +#define CH_PIXC_OVERLAY 16 +#define CH_PIXC_OUTPUT 17 +#define CH_SPORT2_RX 18 +#define CH_UART2_RX 18 +#define CH_SPORT2_TX 19 +#define CH_UART2_TX 19 +#define CH_SPORT3_RX 20 +#define CH_UART3_RX 20 +#define CH_SPORT3_TX 21 +#define CH_UART3_TX 21 +#define CH_SDH 22 +#define CH_NFC 22 +#define CH_SPI2 23 + +#define CH_MEM_STREAM0_DEST 24 +#define CH_MEM_STREAM0_SRC 25 +#define CH_MEM_STREAM1_DEST 26 +#define CH_MEM_STREAM1_SRC 27 +#define CH_MEM_STREAM2_DEST 28 +#define CH_MEM_STREAM2_SRC 29 +#define CH_MEM_STREAM3_DEST 30 +#define CH_MEM_STREAM3_SRC 31 + +#define MAX_BLACKFIN_DMA_CHANNEL 32 + +#endif diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h new file mode 100644 index 00000000000..bba82dc75f1 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -0,0 +1,219 @@ +/* + * File: include/asm-blackfin/mach-bf548/gpio.h + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 /* N/A */ +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 /* N/A */ +#define GPIO_PC15 47 /* N/A */ +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 +#define GPIO_PH0 112 +#define GPIO_PH1 113 +#define GPIO_PH2 114 +#define GPIO_PH3 115 +#define GPIO_PH4 116 +#define GPIO_PH5 117 +#define GPIO_PH6 118 +#define GPIO_PH7 119 +#define GPIO_PH8 120 +#define GPIO_PH9 121 +#define GPIO_PH10 122 +#define GPIO_PH11 123 +#define GPIO_PH12 124 +#define GPIO_PH13 125 +#define GPIO_PH14 126 /* N/A */ +#define GPIO_PH15 127 /* N/A */ +#define GPIO_PI0 128 +#define GPIO_PI1 129 +#define GPIO_PI2 130 +#define GPIO_PI3 131 +#define GPIO_PI4 132 +#define GPIO_PI5 133 +#define GPIO_PI6 134 +#define GPIO_PI7 135 +#define GPIO_PI8 136 +#define GPIO_PI9 137 +#define GPIO_PI10 138 +#define GPIO_PI11 139 +#define GPIO_PI12 140 +#define GPIO_PI13 141 +#define GPIO_PI14 142 +#define GPIO_PI15 143 +#define GPIO_PJ0 144 +#define GPIO_PJ1 145 +#define GPIO_PJ2 146 +#define GPIO_PJ3 147 +#define GPIO_PJ4 148 +#define GPIO_PJ5 149 +#define GPIO_PJ6 150 +#define GPIO_PJ7 151 +#define GPIO_PJ8 152 +#define GPIO_PJ9 153 +#define GPIO_PJ10 154 +#define GPIO_PJ11 155 +#define GPIO_PJ12 156 +#define GPIO_PJ13 157 +#define GPIO_PJ14 158 /* N/A */ +#define GPIO_PJ15 159 /* N/A */ + +#define MAX_BLACKFIN_GPIOS 160 + +struct gpio_port_t { + unsigned short port_fer; + unsigned short dummy1; + unsigned short port_data; + unsigned short dummy2; + unsigned short port_set; + unsigned short dummy3; + unsigned short port_clear; + unsigned short dummy4; + unsigned short port_dir_set; + unsigned short dummy5; + unsigned short port_dir_clear; + unsigned short dummy6; + unsigned short port_inen; + unsigned short dummy7; + unsigned int port_mux; +}; + +struct gpio_port_s { + unsigned short fer; + unsigned short data; + unsigned short dir; + unsigned short inen; + unsigned int mux; +}; diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h new file mode 100644 index 00000000000..ad380d1f587 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -0,0 +1,501 @@ +/* + * file: include/asm-blackfin/mach-bf548/irq.h + * based on: include/asm-blackfin/mach-bf537/irq.h + * author: Roy Huang (roy.huang@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF548_IRQ_H_ +#define _BF548_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** +Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + +..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * + */ + +#define NR_PERI_INTS (32 * 3) + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt*/ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMAC0_ERROR BFIN_IRQ(1) /* DMAC0 Status Interrupt */ +#define IRQ_EPPI0_ERROR BFIN_IRQ(2) /* EPPI0 Error Interrupt */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */ +#define IRQ_SPI0_ERROR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */ +#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */ +#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */ +#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */ +#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */ +#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */ +#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */ +#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */ +#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */ +#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */ +#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */ +#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */ +#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */ +#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ +#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ +#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ +#define IRQ_WATCH BFIN_IRQ(23) /* Watchdog Interrupt */ +#define IRQ_DMAC1_ERROR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ +#define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ +#define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ +#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */ +#define IRQ_SPI1_ERROR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */ +#define IRQ_SPI2_ERROR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */ +#define IRQ_UART1_ERROR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */ +#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ +#define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ +#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ +#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */ +#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ +#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */ +#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ +#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */ +#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ +#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */ +#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ +#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ +#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ +#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */ +#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */ +#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */ +#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */ +#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */ +#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */ +#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */ +#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */ +#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */ +#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */ +#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */ +#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ +#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ +#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ +#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ +#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ +#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ +#define IRQ_NFC_ERROR BFIN_IRQ(60) /* NFC Error Interrupt */ +#define IRQ_ATAPI_ERROR BFIN_IRQ(61) /* ATAPI Error Interrupt */ +#define IRQ_CAN1_ERROR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */ +#define IRQ_HS_DMA_ERROR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */ +#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */ +#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */ +#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */ +#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */ +#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */ +#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */ +#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */ +#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */ +#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */ +#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */ +#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */ +#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */ +#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */ +#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */ +#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */ +#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */ +#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */ +#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */ +#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */ +#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */ +#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */ +#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */ +#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ +#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ + +#define SYS_IRQS IRQ_PINT3 + +#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) +#define IRQ_PA0 BFIN_PA_IRQ(0) +#define IRQ_PA1 BFIN_PA_IRQ(1) +#define IRQ_PA2 BFIN_PA_IRQ(2) +#define IRQ_PA3 BFIN_PA_IRQ(3) +#define IRQ_PA4 BFIN_PA_IRQ(4) +#define IRQ_PA5 BFIN_PA_IRQ(5) +#define IRQ_PA6 BFIN_PA_IRQ(6) +#define IRQ_PA7 BFIN_PA_IRQ(7) +#define IRQ_PA8 BFIN_PA_IRQ(8) +#define IRQ_PA9 BFIN_PA_IRQ(9) +#define IRQ_PA10 BFIN_PA_IRQ(10) +#define IRQ_PA11 BFIN_PA_IRQ(11) +#define IRQ_PA12 BFIN_PA_IRQ(12) +#define IRQ_PA13 BFIN_PA_IRQ(13) +#define IRQ_PA14 BFIN_PA_IRQ(14) +#define IRQ_PA15 BFIN_PA_IRQ(15) + +#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1) +#define IRQ_PB0 BFIN_PB_IRQ(0) +#define IRQ_PB1 BFIN_PB_IRQ(1) +#define IRQ_PB2 BFIN_PB_IRQ(2) +#define IRQ_PB3 BFIN_PB_IRQ(3) +#define IRQ_PB4 BFIN_PB_IRQ(4) +#define IRQ_PB5 BFIN_PB_IRQ(5) +#define IRQ_PB6 BFIN_PB_IRQ(6) +#define IRQ_PB7 BFIN_PB_IRQ(7) +#define IRQ_PB8 BFIN_PB_IRQ(8) +#define IRQ_PB9 BFIN_PB_IRQ(9) +#define IRQ_PB10 BFIN_PB_IRQ(10) +#define IRQ_PB11 BFIN_PB_IRQ(11) +#define IRQ_PB12 BFIN_PB_IRQ(12) +#define IRQ_PB13 BFIN_PB_IRQ(13) +#define IRQ_PB14 BFIN_PB_IRQ(14) +#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */ + +#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1) +#define IRQ_PC0 BFIN_PC_IRQ(0) +#define IRQ_PC1 BFIN_PC_IRQ(1) +#define IRQ_PC2 BFIN_PC_IRQ(2) +#define IRQ_PC3 BFIN_PC_IRQ(3) +#define IRQ_PC4 BFIN_PC_IRQ(4) +#define IRQ_PC5 BFIN_PC_IRQ(5) +#define IRQ_PC6 BFIN_PC_IRQ(6) +#define IRQ_PC7 BFIN_PC_IRQ(7) +#define IRQ_PC8 BFIN_PC_IRQ(8) +#define IRQ_PC9 BFIN_PC_IRQ(9) +#define IRQ_PC10 BFIN_PC_IRQ(10) +#define IRQ_PC11 BFIN_PC_IRQ(11) +#define IRQ_PC12 BFIN_PC_IRQ(12) +#define IRQ_PC13 BFIN_PC_IRQ(13) +#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */ +#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */ + +#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1) +#define IRQ_PD0 BFIN_PD_IRQ(0) +#define IRQ_PD1 BFIN_PD_IRQ(1) +#define IRQ_PD2 BFIN_PD_IRQ(2) +#define IRQ_PD3 BFIN_PD_IRQ(3) +#define IRQ_PD4 BFIN_PD_IRQ(4) +#define IRQ_PD5 BFIN_PD_IRQ(5) +#define IRQ_PD6 BFIN_PD_IRQ(6) +#define IRQ_PD7 BFIN_PD_IRQ(7) +#define IRQ_PD8 BFIN_PD_IRQ(8) +#define IRQ_PD9 BFIN_PD_IRQ(9) +#define IRQ_PD10 BFIN_PD_IRQ(10) +#define IRQ_PD11 BFIN_PD_IRQ(11) +#define IRQ_PD12 BFIN_PD_IRQ(12) +#define IRQ_PD13 BFIN_PD_IRQ(13) +#define IRQ_PD14 BFIN_PD_IRQ(14) +#define IRQ_PD15 BFIN_PD_IRQ(15) + +#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1) +#define IRQ_PE0 BFIN_PE_IRQ(0) +#define IRQ_PE1 BFIN_PE_IRQ(1) +#define IRQ_PE2 BFIN_PE_IRQ(2) +#define IRQ_PE3 BFIN_PE_IRQ(3) +#define IRQ_PE4 BFIN_PE_IRQ(4) +#define IRQ_PE5 BFIN_PE_IRQ(5) +#define IRQ_PE6 BFIN_PE_IRQ(6) +#define IRQ_PE7 BFIN_PE_IRQ(7) +#define IRQ_PE8 BFIN_PE_IRQ(8) +#define IRQ_PE9 BFIN_PE_IRQ(9) +#define IRQ_PE10 BFIN_PE_IRQ(10) +#define IRQ_PE11 BFIN_PE_IRQ(11) +#define IRQ_PE12 BFIN_PE_IRQ(12) +#define IRQ_PE13 BFIN_PE_IRQ(13) +#define IRQ_PE14 BFIN_PE_IRQ(14) +#define IRQ_PE15 BFIN_PE_IRQ(15) + +#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1) +#define IRQ_PF0 BFIN_PF_IRQ(0) +#define IRQ_PF1 BFIN_PF_IRQ(1) +#define IRQ_PF2 BFIN_PF_IRQ(2) +#define IRQ_PF3 BFIN_PF_IRQ(3) +#define IRQ_PF4 BFIN_PF_IRQ(4) +#define IRQ_PF5 BFIN_PF_IRQ(5) +#define IRQ_PF6 BFIN_PF_IRQ(6) +#define IRQ_PF7 BFIN_PF_IRQ(7) +#define IRQ_PF8 BFIN_PF_IRQ(8) +#define IRQ_PF9 BFIN_PF_IRQ(9) +#define IRQ_PF10 BFIN_PF_IRQ(10) +#define IRQ_PF11 BFIN_PF_IRQ(11) +#define IRQ_PF12 BFIN_PF_IRQ(12) +#define IRQ_PF13 BFIN_PF_IRQ(13) +#define IRQ_PF14 BFIN_PF_IRQ(14) +#define IRQ_PF15 BFIN_PF_IRQ(15) + +#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1) +#define IRQ_PG0 BFIN_PG_IRQ(0) +#define IRQ_PG1 BFIN_PG_IRQ(1) +#define IRQ_PG2 BFIN_PG_IRQ(2) +#define IRQ_PG3 BFIN_PG_IRQ(3) +#define IRQ_PG4 BFIN_PG_IRQ(4) +#define IRQ_PG5 BFIN_PG_IRQ(5) +#define IRQ_PG6 BFIN_PG_IRQ(6) +#define IRQ_PG7 BFIN_PG_IRQ(7) +#define IRQ_PG8 BFIN_PG_IRQ(8) +#define IRQ_PG9 BFIN_PG_IRQ(9) +#define IRQ_PG10 BFIN_PG_IRQ(10) +#define IRQ_PG11 BFIN_PG_IRQ(11) +#define IRQ_PG12 BFIN_PG_IRQ(12) +#define IRQ_PG13 BFIN_PG_IRQ(13) +#define IRQ_PG14 BFIN_PG_IRQ(14) +#define IRQ_PG15 BFIN_PG_IRQ(15) + +#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1) +#define IRQ_PH0 BFIN_PH_IRQ(0) +#define IRQ_PH1 BFIN_PH_IRQ(1) +#define IRQ_PH2 BFIN_PH_IRQ(2) +#define IRQ_PH3 BFIN_PH_IRQ(3) +#define IRQ_PH4 BFIN_PH_IRQ(4) +#define IRQ_PH5 BFIN_PH_IRQ(5) +#define IRQ_PH6 BFIN_PH_IRQ(6) +#define IRQ_PH7 BFIN_PH_IRQ(7) +#define IRQ_PH8 BFIN_PH_IRQ(8) +#define IRQ_PH9 BFIN_PH_IRQ(9) +#define IRQ_PH10 BFIN_PH_IRQ(10) +#define IRQ_PH11 BFIN_PH_IRQ(11) +#define IRQ_PH12 BFIN_PH_IRQ(12) +#define IRQ_PH13 BFIN_PH_IRQ(13) +#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */ +#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */ + +#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1) +#define IRQ_PI0 BFIN_PI_IRQ(0) +#define IRQ_PI1 BFIN_PI_IRQ(1) +#define IRQ_PI2 BFIN_PI_IRQ(2) +#define IRQ_PI3 BFIN_PI_IRQ(3) +#define IRQ_PI4 BFIN_PI_IRQ(4) +#define IRQ_PI5 BFIN_PI_IRQ(5) +#define IRQ_PI6 BFIN_PI_IRQ(6) +#define IRQ_PI7 BFIN_PI_IRQ(7) +#define IRQ_PI8 BFIN_PI_IRQ(8) +#define IRQ_PI9 BFIN_PI_IRQ(9) +#define IRQ_PI10 BFIN_PI_IRQ(10) +#define IRQ_PI11 BFIN_PI_IRQ(11) +#define IRQ_PI12 BFIN_PI_IRQ(12) +#define IRQ_PI13 BFIN_PI_IRQ(13) +#define IRQ_PI14 BFIN_PI_IRQ(14) +#define IRQ_PI15 BFIN_PI_IRQ(15) + +#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1) +#define IRQ_PJ0 BFIN_PJ_IRQ(0) +#define IRQ_PJ1 BFIN_PJ_IRQ(1) +#define IRQ_PJ2 BFIN_PJ_IRQ(2) +#define IRQ_PJ3 BFIN_PJ_IRQ(3) +#define IRQ_PJ4 BFIN_PJ_IRQ(4) +#define IRQ_PJ5 BFIN_PJ_IRQ(5) +#define IRQ_PJ6 BFIN_PJ_IRQ(6) +#define IRQ_PJ7 BFIN_PJ_IRQ(7) +#define IRQ_PJ8 BFIN_PJ_IRQ(8) +#define IRQ_PJ9 BFIN_PJ_IRQ(9) +#define IRQ_PJ10 BFIN_PJ_IRQ(10) +#define IRQ_PJ11 BFIN_PJ_IRQ(11) +#define IRQ_PJ12 BFIN_PJ_IRQ(12) +#define IRQ_PJ13 BFIN_PJ_IRQ(13) +#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */ +#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */ + +#define GPIO_IRQ_BASE IRQ_PA0 + +#define NR_IRQS (IRQ_PJ15+1) + +/* For compatibility reasons with existing code */ + +#define IRQ_DMAC0_ERR IRQ_DMAC0_ERROR +#define IRQ_EPPI0_ERR IRQ_EPPI0_ERROR +#define IRQ_SPORT0_ERR IRQ_SPORT0_ERROR +#define IRQ_SPORT1_ERR IRQ_SPORT1_ERROR +#define IRQ_SPI0_ERR IRQ_SPI0_ERROR +#define IRQ_UART0_ERR IRQ_UART0_ERROR +#define IRQ_DMAC1_ERR IRQ_DMAC1_ERROR +#define IRQ_SPORT2_ERR IRQ_SPORT2_ERROR +#define IRQ_SPORT3_ERR IRQ_SPORT3_ERROR +#define IRQ_SPI1_ERR IRQ_SPI1_ERROR +#define IRQ_SPI2_ERR IRQ_SPI2_ERROR +#define IRQ_UART1_ERR IRQ_UART1_ERROR +#define IRQ_UART2_ERR IRQ_UART2_ERROR +#define IRQ_CAN0_ERR IRQ_CAN0_ERROR +#define IRQ_MXVR_ERR IRQ_MXVR_ERROR +#define IRQ_EPP1_ERR IRQ_EPP1_ERROR +#define IRQ_EPP2_ERR IRQ_EPP2_ERROR +#define IRQ_UART3_ERR IRQ_UART3_ERROR +#define IRQ_HOST_ERR IRQ_HOST_ERROR +#define IRQ_PIXC_ERR IRQ_PIXC_ERROR +#define IRQ_NFC_ERR IRQ_NFC_ERROR +#define IRQ_ATAPI_ERR IRQ_ATAPI_ERROR +#define IRQ_CAN1_ERR IRQ_CAN1_ERROR +#define IRQ_HS_DMA_ERR IRQ_HS_DMA_ERROR + + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMAC0_ERR_POS 4 +#define IRQ_EPPI0_ERR_POS 8 +#define IRQ_SPORT0_ERR_POS 12 +#define IRQ_SPORT1_ERR_POS 16 +#define IRQ_SPI0_ERR_POS 20 +#define IRQ_UART0_ERR_POS 24 +#define IRQ_RTC_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_EPPI0_POS 0 +#define IRQ_SPORT0_RX_POS 4 +#define IRQ_SPORT0_TX_POS 8 +#define IRQ_SPORT1_RX_POS 12 +#define IRQ_SPORT1_TX_POS 16 +#define IRQ_SPI0_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_TIMER8_POS 0 +#define IRQ_TIMER9_POS 4 +#define IRQ_TIMER10_POS 8 +#define IRQ_PINT0_POS 12 +#define IRQ_PINT1_POS 16 +#define IRQ_MDMAS0_POS 20 +#define IRQ_MDMAS1_POS 24 +#define IRQ_WATCH_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_DMAC1_ERR_POS 0 +#define IRQ_SPORT2_ERR_POS 4 +#define IRQ_SPORT3_ERR_POS 8 +#define IRQ_MXVR_DATA_POS 12 +#define IRQ_SPI1_ERR_POS 16 +#define IRQ_SPI2_ERR_POS 20 +#define IRQ_UART1_ERR_POS 24 +#define IRQ_UART2_ERR_POS 28 + +/* IAR4 BIT FILEDS */ +#define IRQ_CAN0_ERR_POS 0 +#define IRQ_SPORT2_RX_POS 4 +#define IRQ_UART2_RX_POS 4 +#define IRQ_SPORT2_TX_POS 8 +#define IRQ_UART2_TX_POS 8 +#define IRQ_SPORT3_RX_POS 12 +#define IRQ_UART3_RX_POS 12 +#define IRQ_SPORT3_TX_POS 16 +#define IRQ_UART3_TX_POS 16 +#define IRQ_EPPI1_POS 20 +#define IRQ_EPPI2_POS 24 +#define IRQ_SPI1_POS 28 + +/* IAR5 BIT FIELDS */ +#define IRQ_SPI2_POS 0 +#define IRQ_UART1_RX_POS 4 +#define IRQ_UART1_TX_POS 8 +#define IRQ_ATAPI_RX_POS 12 +#define IRQ_ATAPI_TX_POS 16 +#define IRQ_TWI0_POS 20 +#define IRQ_TWI1_POS 24 +#define IRQ_CAN0_RX_POS 28 + +/* IAR6 BIT FIELDS */ +#define IRQ_CAN0_TX_POS 0 +#define IRQ_MDMAS2_POS 4 +#define IRQ_MDMAS3_POS 8 +#define IRQ_MXVR_ERR_POS 12 +#define IRQ_MXVR_MSG_POS 16 +#define IRQ_MXVR_PKT_POS 20 +#define IRQ_EPPI1_ERR_POS 24 +#define IRQ_EPPI2_ERR_POS 28 + +/* IAR7 BIT FIELDS */ +#define IRQ_UART3_ERR_POS 0 +#define IRQ_HOST_ERR_POS 4 +#define IRQ_PIXC_ERR_POS 12 +#define IRQ_NFC_ERR_POS 16 +#define IRQ_ATAPI_ERR_POS 20 +#define IRQ_CAN1_ERR_POS 24 +#define IRQ_HS_DMA_ERR_POS 28 + +/* IAR8 BIT FIELDS */ +#define IRQ_PIXC_IN0_POS 0 +#define IRQ_PIXC_IN1_POS 4 +#define IRQ_PIXC_OUT_POS 8 +#define IRQ_SDH_POS 12 +#define IRQ_CNT_POS 16 +#define IRQ_KEY_POS 20 +#define IRQ_CAN1_RX_POS 24 +#define IRQ_CAN1_TX_POS 28 + +/* IAR9 BIT FIELDS */ +#define IRQ_SDH_MASK0_POS 0 +#define IRQ_SDH_MASK1_POS 4 +#define IRQ_USB_INT0_POS 12 +#define IRQ_USB_INT1_POS 16 +#define IRQ_USB_INT2_POS 20 +#define IRQ_USB_DMA_POS 24 +#define IRQ_OTPSEC_POS 28 + +/* IAR10 BIT FIELDS */ +#define IRQ_TIMER0_POS 24 +#define IRQ_TIMER1_POS 28 + +/* IAR11 BIT FIELDS */ +#define IRQ_TIMER2_POS 0 +#define IRQ_TIMER3_POS 4 +#define IRQ_TIMER4_POS 8 +#define IRQ_TIMER5_POS 12 +#define IRQ_TIMER6_POS 16 +#define IRQ_TIMER7_POS 20 +#define IRQ_PINT2_POS 24 +#define IRQ_PINT3_POS 28 + +#endif /* _BF548_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h new file mode 100644 index 00000000000..ab0b863eee6 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/mem_init.h @@ -0,0 +1,255 @@ +/* + * File: include/asm-blackfin/mach-bf548/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) +#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000) +#define DDR_CLK_HZ(x) (1000*1000*1000/x) + +#if (CONFIG_MEM_MT46V32M16_6T) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(1) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_MT46V32M16_5B) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 + +#define DDR_tRCD DDR_TRCD(3) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tWR DDR_TWR(2) +#define DDR_tMRD DDR_TMRD(2) +#define DDR_tRP DDR_TRP(3) +#define DDR_tRAS DDR_TRAS(7) +#define DDR_tRC DDR_TRC(10) +#define DDR_tRFC DDR_TRFC(12) +#define DDR_tREFI DDR_TREFI(1288) +#endif + +#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) +# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." +#elif(CONFIG_SCLK_HZ <= 133333333) +# define DDR_CL CL_2 +#else +# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)." +#endif + + +#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) +#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ + | DDR_tMRD | DDR_tWR | DDR_tRCD) +#define mem_DDRCTL2 DDR_CL + + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h new file mode 100644 index 00000000000..f99f47bc3a0 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h @@ -0,0 +1,111 @@ +/* + * file: include/asm-blackfin/mach-bf548/mem_map.h + * based on: + * author: + * + * created: + * description: + * Memory MAP Common header file for blackfin BF537/6/4 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_548_H_ +#define _MEM_MAP_548_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x1000 + +/* L1 Instruction ROM */ + +#define L1_ROM_START 0xFFA14000 +#define L1_ROM_LENGTH 0x10000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF548 processors */ +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + +/* Level 2 Memory */ +#if !defined(CONFIG_BF542) +# define L2_START 0xFEB00000 +# if defined(CONFIG_BF544) +# define L2_LENGTH 0x10000 +# else +# define L2_LENGTH 0x20000 +# endif +#endif + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif/* _MEM_MAP_548_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h new file mode 100644 index 00000000000..8177a567dcd --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -0,0 +1,286 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) +#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) +#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) +#define P_SPORT2_TSCLK (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0)) +#define P_SPORT2_RFS (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0)) +#define P_SPORT2_DRSEC (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0)) +#define P_SPORT2_DRPRI (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0)) +#define P_SPORT2_RSCLK (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0)) +#define P_SPORT3_TFS (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0)) +#define P_SPORT3_DTSEC (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0)) +#define P_SPORT3_DTPRI (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0)) +#define P_SPORT3_TSCLK (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0)) +#define P_SPORT3_RFS (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0)) +#define P_SPORT3_DRSEC (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0)) +#define P_SPORT3_DRPRI (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0)) +#define P_SPORT3_RSCLK (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1)) + +#define P_TWI1_SCL (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0)) +#define P_TWI1_SDA (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0)) +#define P_UART3_RTS (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0)) +#define P_UART3_CTS (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0)) +#define P_UART2_TX (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0)) +#define P_UART2_RX (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0)) +#define P_UART3_TX (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0)) +#define P_UART3_RX (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0)) +#define P_SPI2_SS (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0)) +#define P_SPI2_SSEL1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0)) +#define P_SPI2_SSEL2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0)) +#define P_SPI2_SSEL3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0)) +#define P_SPI2_SCK (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0)) +#define P_SPI2_MOSI (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0)) +#define P_SPI2_MISO (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1)) + +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) +#define P_SD_D0 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0)) +#define P_SD_D1 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) +#define P_SD_D2 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0)) +#define P_SD_D3 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0)) +#define P_SD_CLK (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0)) +#define P_SD_CMD (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0)) +#define P_MMCLK (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1)) +#define P_MBCLK (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1)) + +#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0)) +#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0)) +#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0)) +#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0)) +#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0)) +#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0)) +#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0)) +#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0)) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0)) + +#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1)) +#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1)) +#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1)) +#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1)) +#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1)) +#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1)) +#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1)) +#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1)) +#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1)) +#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1)) +#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1)) +#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1)) +#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1)) +#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1)) +#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1)) +#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2)) +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2)) +#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2)) +#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2)) +#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2)) +#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2)) +#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2)) +#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2)) +#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2)) +#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3)) +#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3)) +#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3)) +#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3)) +#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3)) +#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3)) +#define P_KEY_ROW0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3)) +#define P_KEY_ROW1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3)) +#define P_KEY_ROW2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3)) +#define P_KEY_ROW3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3)) +#define P_KEY_COL0 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3)) +#define P_KEY_COL1 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3)) +#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) +#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) + +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0)) +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0)) +#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0)) +#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0)) +#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) +#define P_TWI0_SCL (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) +#define P_TWI0_SDA (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0)) +#define P_KEY_COL7 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1)) +#define P_KEY_ROW6 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1)) +#define P_KEY_COL6 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1)) +#define P_KEY_ROW5 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1)) +#define P_KEY_COL5 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1)) +#define P_KEY_ROW4 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1)) +#define P_KEY_COL4 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1)) +#define P_KEY_ROW7 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1)) + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) +#define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_CAN1_TX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_CAN1_RX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) +#define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_MTXONB (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2)) +#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_ATAPI_RESET (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_MTX (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_MRX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_MRXONB (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#define P_A4 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_A5 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_A6 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_A7 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_A8 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_A9 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_TMR8 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) +#define P_TMR9 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) +#define P_TMR10 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) + +#define P_A10 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0)) +#define P_A11 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0)) +#define P_A12 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0)) +#define P_A13 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0)) +#define P_A14 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0)) +#define P_A15 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0)) +#define P_A16 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0)) +#define P_A17 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0)) +#define P_A18 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0)) +#define P_A19 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0)) +#define P_A20 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0)) +#define P_A21 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0)) +#define P_A22 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0)) +#define P_A23 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0)) +#define P_A24 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0)) +#define P_A25 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0)) +#define P_NOR_CLK (P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1)) + +#define P_AMC_ARDY_NOR_WAIT (P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0)) +#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0)) +#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0)) +#define P_ATAPI_DIOR (P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0)) +#define P_ATAPI_DIOW (P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0)) +#define P_ATAPI_CS0 (P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0)) +#define P_ATAPI_CS1 (P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0)) +#define P_ATAPI_DMACK (P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0)) +#define P_ATAPI_DMARQ (P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0)) +#define P_ATAPI_INTRQ (P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0)) +#define P_ATAPI_IORDY (P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0)) +#define P_AMC_BR (P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0)) +#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0)) +#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0)) + + +#define P_NAND_D0 (P_DONTCARE) +#define P_NAND_D1 (P_DONTCARE) +#define P_NAND_D2 (P_DONTCARE) +#define P_NAND_D3 (P_DONTCARE) +#define P_NAND_D4 (P_DONTCARE) +#define P_NAND_D5 (P_DONTCARE) +#define P_NAND_D6 (P_DONTCARE) +#define P_NAND_D7 (P_DONTCARE) +#define P_NAND_WE (P_DONTCARE) +#define P_NAND_RE (P_DONTCARE) +#define P_NAND_CLE (P_DONTCARE) +#define P_NAND_ALE (P_DONTCARE) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index c7a81e34703..75ea6a90582 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -31,8 +31,8 @@ #include <linux/init.h> #include <asm/blackfin.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include <asm/mach-common/clocks.h> -#include <asm/mach/mem_init.h> +#include <asm/clocks.h> +#include <mach/mem_init.h> #endif .section .l1.text diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h new file mode 100644 index 00000000000..5c5d7d7d695 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -0,0 +1,274 @@ +/* + * File: include/asm-blackfin/mach-bf561/anomaly.h + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright (C) 2004-2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* This file shoule be up to date with: + * - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ +#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 +# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 +#endif + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Testset instructions restricted to 32-bit aligned memory locations */ +#define ANOMALY_05000120 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Signbits instruction not functional under certain conditions */ +#define ANOMALY_05000127 (1) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000149 (1) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ +#define ANOMALY_05000156 (__SILICON_REVISION__ < 4) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 5) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 5) +/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000171 (__SILICON_REVISION__ < 5) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 5) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 5) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 5) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 5) +/* IMDMA does not operate to full speed for 600MHz and higher devices */ +#define ANOMALY_05000182 (1) +/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000184 (__SILICON_REVISION__ < 5) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 5) +/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +#define ANOMALY_05000186 (__SILICON_REVISION__ < 5) +/* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000187 (1) +/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ +#define ANOMALY_05000188 (__SILICON_REVISION__ < 5) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 5) +/* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000190 (1) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 5) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 5) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 5) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 5) +/* Specific sequence that can cause DMA error or DMA stopping */ +#define ANOMALY_05000205 (__SILICON_REVISION__ < 5) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 5) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 5) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (__SILICON_REVISION__ < 5) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +#define ANOMALY_05000232 (__SILICON_REVISION__ < 5) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 5) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (__SILICON_REVISION__ < 5) +/* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000248 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) +/* Exception Not Generated for MMR Accesses in Reserved Region */ +#define ANOMALY_05000251 (__SILICON_REVISION__ < 5) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 3) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* IMDMA destination IRQ status must be read prior to using IMDMA */ +#define ANOMALY_05000266 (__SILICON_REVISION__ > 3) +/* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000267 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Data cache write back to external synchronous memory may be lost */ +#define ANOMALY_05000274 (1) +/* PPI Timing and Sampling Information Updates */ +#define ANOMALY_05000275 (__SILICON_REVISION__ > 2) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (__SILICON_REVISION__ < 5) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* A read will receive incorrect data under certain conditions */ +#define ANOMALY_05000287 (__SILICON_REVISION__ < 5) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 5) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (1) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* PF2 Output Remains Asserted After SPI Master Boot */ +#define ANOMALY_05000320 (__SILICON_REVISION__ > 3) +/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +#define ANOMALY_05000323 (1) +/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +#define ANOMALY_05000326 (__SILICON_REVISION__ > 3) +/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +#define ANOMALY_05000331 (__SILICON_REVISION__ < 5) +/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +#define ANOMALY_05000332 (__SILICON_REVISION__ < 5) +/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +#define ANOMALY_05000333 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +#define ANOMALY_05000339 (__SILICON_REVISION__ < 5) +/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ +#define ANOMALY_05000343 (__SILICON_REVISION__ < 5) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Conflicting Column Address Widths Causes SDRAM Errors */ +#define ANOMALY_05000362 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000158 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) + +#endif diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h new file mode 100644 index 00000000000..3ef9e5f3613 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/bf561.h @@ -0,0 +1,223 @@ +/* + * File: include/asm-blackfin/mach-bf561/bf561.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF561_H__ +#define __MACH_BF561_H__ + +#define SUPPORTED_REVID 0x3 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/*************************** + * Blackfin Cache setup + */ + + +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS */ +#define PLL_WAKEUP_BIT 0xFFFFFFFF +#define DMA1_ERROR_BIT 0xFFFFFF0F +#define DMA2_ERROR_BIT 0xFFFFF0FF +#define IMDMA_ERROR_BIT 0xFFFF0FFF +#define PPI1_ERROR_BIT 0xFFF0FFFF +#define PPI2_ERROR_BIT 0xFF0FFFFF +#define SPORT0_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0x0FFFFFFF +/* IAR1 BIT FIELDS */ +#define SPI_ERROR_BIT 0xFFFFFFFF +#define UART_ERROR_BIT 0xFFFFFF0F +#define RESERVED_ERROR_BIT 0xFFFFF0FF +#define DMA1_0_BIT 0xFFFF0FFF +#define DMA1_1_BIT 0xFFF0FFFF +#define DMA1_2_BIT 0xFF0FFFFF +#define DMA1_3_BIT 0xF0FFFFFF +#define DMA1_4_BIT 0x0FFFFFFF +/* IAR2 BIT FIELDS */ +#define DMA1_5_BIT 0xFFFFFFFF +#define DMA1_6_BIT 0xFFFFFF0F +#define DMA1_7_BIT 0xFFFFF0FF +#define DMA1_8_BIT 0xFFFF0FFF +#define DMA1_9_BIT 0xFFF0FFFF +#define DMA1_10_BIT 0xFF0FFFFF +#define DMA1_11_BIT 0xF0FFFFFF +#define DMA2_0_BIT 0x0FFFFFFF +/* IAR3 BIT FIELDS */ +#define DMA2_1_BIT 0xFFFFFFFF +#define DMA2_2_BIT 0xFFFFFF0F +#define DMA2_3_BIT 0xFFFFF0FF +#define DMA2_4_BIT 0xFFFF0FFF +#define DMA2_5_BIT 0xFFF0FFFF +#define DMA2_6_BIT 0xFF0FFFFF +#define DMA2_7_BIT 0xF0FFFFFF +#define DMA2_8_BIT 0x0FFFFFFF +/* IAR4 BIT FIELDS */ +#define DMA2_9_BIT 0xFFFFFFFF +#define DMA2_10_BIT 0xFFFFFF0F +#define DMA2_11_BIT 0xFFFFF0FF +#define TIMER0_BIT 0xFFFF0FFF +#define TIMER1_BIT 0xFFF0FFFF +#define TIMER2_BIT 0xFF0FFFFF +#define TIMER3_BIT 0xF0FFFFFF +#define TIMER4_BIT 0x0FFFFFFF +/* IAR5 BIT FIELDS */ +#define TIMER5_BIT 0xFFFFFFFF +#define TIMER6_BIT 0xFFFFFF0F +#define TIMER7_BIT 0xFFFFF0FF +#define TIMER8_BIT 0xFFFF0FFF +#define TIMER9_BIT 0xFFF0FFFF +#define TIMER10_BIT 0xFF0FFFFF +#define TIMER11_BIT 0xF0FFFFFF +#define PROG0_INTA_BIT 0x0FFFFFFF +/* IAR6 BIT FIELDS */ +#define PROG0_INTB_BIT 0xFFFFFFFF +#define PROG1_INTA_BIT 0xFFFFFF0F +#define PROG1_INTB_BIT 0xFFFFF0FF +#define PROG2_INTA_BIT 0xFFFF0FFF +#define PROG2_INTB_BIT 0xFFF0FFFF +#define DMA1_WRRD0_BIT 0xFF0FFFFF +#define DMA1_WRRD1_BIT 0xF0FFFFFF +#define DMA2_WRRD0_BIT 0x0FFFFFFF +/* IAR7 BIT FIELDS */ +#define DMA2_WRRD1_BIT 0xFFFFFFFF +#define IMDMA_WRRD0_BIT 0xFFFFFF0F +#define IMDMA_WRRD1_BIT 0xFFFFF0FF +#define WATCH_BIT 0xFFFF0FFF +#define RESERVED_1_BIT 0xFFF0FFFF +#define RESERVED_2_BIT 0xFF0FFFFF +#define SUPPLE_0_BIT 0xF0FFFFFF +#define SUPPLE_1_BIT 0x0FFFFFFF + +/* Miscellaneous Values */ + +/****************************** EBIU Settings ********************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#if defined(CONFIG_C_AMBEN_ALL) +#define V_AMBEN AMBEN_ALL +#elif defined(CONFIG_C_AMBEN) +#define V_AMBEN 0x0 +#elif defined(CONFIG_C_AMBEN_B0) +#define V_AMBEN AMBEN_B0 +#elif defined(CONFIG_C_AMBEN_B0_B1) +#define V_AMBEN AMBEN_B0_B1 +#elif defined(CONFIG_C_AMBEN_B0_B1_B2) +#define V_AMBEN AMBEN_B0_B1_B2 +#endif + +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif + +#ifdef CONFIG_C_B0PEN +#define V_B0PEN 0x10 +#else +#define V_B0PEN 0x00 +#endif + +#ifdef CONFIG_C_B1PEN +#define V_B1PEN 0x20 +#else +#define V_B1PEN 0x00 +#endif + +#ifdef CONFIG_C_B2PEN +#define V_B2PEN 0x40 +#else +#define V_B2PEN 0x00 +#endif + +#ifdef CONFIG_C_B3PEN +#define V_B3PEN 0x80 +#else +#define V_B3PEN 0x00 +#endif + +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002) + +#ifdef CONFIG_BF561 +#define CPU "BF561" +#define CPUID 0x027bb000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#endif /* __MACH_BF561_H__ */ diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h new file mode 100644 index 00000000000..8aa02780e64 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -0,0 +1,164 @@ +/* + * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#ifdef CONFIG_BFIN_UART0_CTSRTS +# define CONFIG_SERIAL_BFIN_CTSRTS +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif +#endif + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + unsigned int lsr; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct timer_list cts_timer; + int cts_pin; + int rts_pin; +#endif +}; + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { + { + 0xFFC00400, + IRQ_UART_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART_TX, + CH_UART_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + } +}; + +#define DRIVER_NAME "bfin-uart" + +int nr_ports = BFIN_UART_NR_PORTS; +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, DRIVER_NAME); + gpio_direction_input(uart->cts_pin); + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_input(uart->rts_pin, 0); + } +#endif +} diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h new file mode 100644 index 00000000000..9bb87e9e2e9 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h @@ -0,0 +1,125 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static int bfin_sir_hw_init(void) +{ + int ret = -ENODEV; +#ifdef CONFIG_BFIN_SIR0 + ret = peripheral_request(P_UART0_TX, DRIVER_NAME); + if (ret) + return ret; + ret = peripheral_request(P_UART0_RX, DRIVER_NAME); + if (ret) + return ret; +#endif + return ret; +} diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h new file mode 100644 index 00000000000..0ea8666e676 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h @@ -0,0 +1,87 @@ +/* + * File: include/asm-blackfin/mach-bf561/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF561_FAMILY + +#include "bf561.h" +#include "mem_map.h" +#include "defBF561.h" +#include "anomaly.h" + +#if !defined(__ASSEMBLY__) +#include "cdefBF561.h" +#endif + +#define bfin_read_FIO_FLAG_D() bfin_read_FIO0_FLAG_D() +#define bfin_write_FIO_FLAG_D(val) bfin_write_FIO0_FLAG_D(val) +#define bfin_read_FIO_DIR() bfin_read_FIO0_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_FIO0_DIR(val) +#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val) + +#define SIC_IWR0 SICA_IWR0 +#define SIC_IWR1 SICA_IWR1 +#define SIC_IAR0 SICA_IAR0 +#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0 +#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1 +#define bfin_write_SIC_IWR0 bfin_write_SICA_IWR0 +#define bfin_write_SIC_IWR1 bfin_write_SICA_IWR1 + +#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0 +#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1 +#define bfin_read_SIC_IWR0 bfin_read_SICA_IWR0 +#define bfin_read_SIC_IWR1 bfin_read_SICA_IWR1 +#define bfin_read_SIC_ISR0 bfin_read_SICA_ISR0 +#define bfin_read_SIC_ISR1 bfin_read_SICA_ISR1 + +#define bfin_read_SIC_IMASK(x) bfin_read32(SICA_IMASK0 + (x << 2)) +#define bfin_write_SIC_IMASK(x, val) bfin_write32((SICA_IMASK0 + (x << 2)), val) +#define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2)) +#define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val) + +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#endif /* _MACH_BLACKFIN_H_ */ diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h new file mode 100644 index 00000000000..c14d63402e7 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -0,0 +1,1579 @@ +/* + * File: include/asm-blackfin/mach-bf561/cdefBF561.h + * Based on: + * Author: + * + * Created: + * Description: C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF561_H +#define _CDEF_BF561_H + +#include <asm/blackfin.h> + +/* include all Core registers and bit definitions */ +#include "defBF561.h" + +/*include core specific register pointer definitions*/ +#include <asm/cdef_LPBlackfin.h> + +#include <asm/system.h> + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) + +/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ +#define bfin_read_SWRST() bfin_read_SICA_SWRST() +#define bfin_write_SWRST(val) bfin_write_SICA_SWRST(val) +#define bfin_read_SYSCR() bfin_read_SICA_SYSCR() +#define bfin_write_SYSCR(val) bfin_write_SICA_SYSCR(val) + +/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ +#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST) +#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val) +#define bfin_read_SICA_SYSCR() bfin_read16(SICA_SYSCR) +#define bfin_write_SICA_SYSCR(val) bfin_write16(SICA_SYSCR,val) +#define bfin_read_SICA_RVECT() bfin_read16(SICA_RVECT) +#define bfin_write_SICA_RVECT(val) bfin_write16(SICA_RVECT,val) +#define bfin_read_SICA_IMASK() bfin_read32(SICA_IMASK) +#define bfin_write_SICA_IMASK(val) bfin_write32(SICA_IMASK,val) +#define bfin_read_SICA_IMASK0() bfin_read32(SICA_IMASK0) +#define bfin_write_SICA_IMASK0(val) bfin_write32(SICA_IMASK0,val) +#define bfin_read_SICA_IMASK1() bfin_read32(SICA_IMASK1) +#define bfin_write_SICA_IMASK1(val) bfin_write32(SICA_IMASK1,val) +#define bfin_read_SICA_IAR0() bfin_read32(SICA_IAR0) +#define bfin_write_SICA_IAR0(val) bfin_write32(SICA_IAR0,val) +#define bfin_read_SICA_IAR1() bfin_read32(SICA_IAR1) +#define bfin_write_SICA_IAR1(val) bfin_write32(SICA_IAR1,val) +#define bfin_read_SICA_IAR2() bfin_read32(SICA_IAR2) +#define bfin_write_SICA_IAR2(val) bfin_write32(SICA_IAR2,val) +#define bfin_read_SICA_IAR3() bfin_read32(SICA_IAR3) +#define bfin_write_SICA_IAR3(val) bfin_write32(SICA_IAR3,val) +#define bfin_read_SICA_IAR4() bfin_read32(SICA_IAR4) +#define bfin_write_SICA_IAR4(val) bfin_write32(SICA_IAR4,val) +#define bfin_read_SICA_IAR5() bfin_read32(SICA_IAR5) +#define bfin_write_SICA_IAR5(val) bfin_write32(SICA_IAR5,val) +#define bfin_read_SICA_IAR6() bfin_read32(SICA_IAR6) +#define bfin_write_SICA_IAR6(val) bfin_write32(SICA_IAR6,val) +#define bfin_read_SICA_IAR7() bfin_read32(SICA_IAR7) +#define bfin_write_SICA_IAR7(val) bfin_write32(SICA_IAR7,val) +#define bfin_read_SICA_ISR0() bfin_read32(SICA_ISR0) +#define bfin_write_SICA_ISR0(val) bfin_write32(SICA_ISR0,val) +#define bfin_read_SICA_ISR1() bfin_read32(SICA_ISR1) +#define bfin_write_SICA_ISR1(val) bfin_write32(SICA_ISR1,val) +#define bfin_read_SICA_IWR0() bfin_read32(SICA_IWR0) +#define bfin_write_SICA_IWR0(val) bfin_write32(SICA_IWR0,val) +#define bfin_read_SICA_IWR1() bfin_read32(SICA_IWR1) +#define bfin_write_SICA_IWR1(val) bfin_write32(SICA_IWR1,val) + +/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ +#define bfin_read_SICB_SWRST() bfin_read16(SICB_SWRST) +#define bfin_write_SICB_SWRST(val) bfin_write16(SICB_SWRST,val) +#define bfin_read_SICB_SYSCR() bfin_read16(SICB_SYSCR) +#define bfin_write_SICB_SYSCR(val) bfin_write16(SICB_SYSCR,val) +#define bfin_read_SICB_RVECT() bfin_read16(SICB_RVECT) +#define bfin_write_SICB_RVECT(val) bfin_write16(SICB_RVECT,val) +#define bfin_read_SICB_IMASK0() bfin_read32(SICB_IMASK0) +#define bfin_write_SICB_IMASK0(val) bfin_write32(SICB_IMASK0,val) +#define bfin_read_SICB_IMASK1() bfin_read32(SICB_IMASK1) +#define bfin_write_SICB_IMASK1(val) bfin_write32(SICB_IMASK1,val) +#define bfin_read_SICB_IAR0() bfin_read32(SICB_IAR0) +#define bfin_write_SICB_IAR0(val) bfin_write32(SICB_IAR0,val) +#define bfin_read_SICB_IAR1() bfin_read32(SICB_IAR1) +#define bfin_write_SICB_IAR1(val) bfin_write32(SICB_IAR1,val) +#define bfin_read_SICB_IAR2() bfin_read32(SICB_IAR2) +#define bfin_write_SICB_IAR2(val) bfin_write32(SICB_IAR2,val) +#define bfin_read_SICB_IAR3() bfin_read32(SICB_IAR3) +#define bfin_write_SICB_IAR3(val) bfin_write32(SICB_IAR3,val) +#define bfin_read_SICB_IAR4() bfin_read32(SICB_IAR4) +#define bfin_write_SICB_IAR4(val) bfin_write32(SICB_IAR4,val) +#define bfin_read_SICB_IAR5() bfin_read32(SICB_IAR5) +#define bfin_write_SICB_IAR5(val) bfin_write32(SICB_IAR5,val) +#define bfin_read_SICB_IAR6() bfin_read32(SICB_IAR6) +#define bfin_write_SICB_IAR6(val) bfin_write32(SICB_IAR6,val) +#define bfin_read_SICB_IAR7() bfin_read32(SICB_IAR7) +#define bfin_write_SICB_IAR7(val) bfin_write32(SICB_IAR7,val) +#define bfin_read_SICB_ISR0() bfin_read32(SICB_ISR0) +#define bfin_write_SICB_ISR0(val) bfin_write32(SICB_ISR0,val) +#define bfin_read_SICB_ISR1() bfin_read32(SICB_ISR1) +#define bfin_write_SICB_ISR1(val) bfin_write32(SICB_ISR1,val) +#define bfin_read_SICB_IWR0() bfin_read32(SICB_IWR0) +#define bfin_write_SICB_IWR0(val) bfin_write32(SICB_IWR0,val) +#define bfin_read_SICB_IWR1() bfin_read32(SICB_IWR1) +#define bfin_write_SICB_IWR1(val) bfin_write32(SICB_IWR1,val) +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define bfin_read_WDOGA_CTL() bfin_read16(WDOGA_CTL) +#define bfin_write_WDOGA_CTL(val) bfin_write16(WDOGA_CTL,val) +#define bfin_read_WDOGA_CNT() bfin_read32(WDOGA_CNT) +#define bfin_write_WDOGA_CNT(val) bfin_write32(WDOGA_CNT,val) +#define bfin_read_WDOGA_STAT() bfin_read32(WDOGA_STAT) +#define bfin_write_WDOGA_STAT(val) bfin_write32(WDOGA_STAT,val) + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define bfin_read_WDOGB_CTL() bfin_read16(WDOGB_CTL) +#define bfin_write_WDOGB_CTL(val) bfin_write16(WDOGB_CTL,val) +#define bfin_read_WDOGB_CNT() bfin_read32(WDOGB_CNT) +#define bfin_write_WDOGB_CNT(val) bfin_write32(WDOGB_CNT,val) +#define bfin_read_WDOGB_STAT() bfin_read32(WDOGB_STAT) +#define bfin_write_WDOGB_STAT(val) bfin_write32(WDOGB_STAT,val) + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART_THR() bfin_read16(UART_THR) +#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) +#define bfin_read_UART_RBR() bfin_read16(UART_RBR) +#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) +#define bfin_read_UART_DLL() bfin_read16(UART_DLL) +#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) +#define bfin_read_UART_IER() bfin_read16(UART_IER) +#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) +#define bfin_read_UART_DLH() bfin_read16(UART_DLH) +#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) +#define bfin_read_UART_IIR() bfin_read16(UART_IIR) +#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) +#define bfin_read_UART_LCR() bfin_read16(UART_LCR) +#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) +#define bfin_read_UART_MCR() bfin_read16(UART_MCR) +#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) +#define bfin_read_UART_LSR() bfin_read16(UART_LSR) +#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) +#define bfin_read_UART_MSR() bfin_read16(UART_MSR) +#define bfin_write_UART_MSR(val) bfin_write16(UART_MSR,val) +#define bfin_read_UART_SCR() bfin_read16(UART_SCR) +#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) +#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) +#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val) + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define bfin_read_TMRS8_ENABLE() bfin_read16(TMRS8_ENABLE) +#define bfin_write_TMRS8_ENABLE(val) bfin_write16(TMRS8_ENABLE,val) +#define bfin_read_TMRS8_DISABLE() bfin_read16(TMRS8_DISABLE) +#define bfin_write_TMRS8_DISABLE(val) bfin_write16(TMRS8_DISABLE,val) +#define bfin_read_TMRS8_STATUS() bfin_read32(TMRS8_STATUS) +#define bfin_write_TMRS8_STATUS(val) bfin_write32(TMRS8_STATUS,val) +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG,val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER,val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD,val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH,val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG,val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER,val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD,val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH,val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG,val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER,val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD,val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH,val) +#define bfin_read_TIMER11_CONFIG() bfin_read16(TIMER11_CONFIG) +#define bfin_write_TIMER11_CONFIG(val) bfin_write16(TIMER11_CONFIG,val) +#define bfin_read_TIMER11_COUNTER() bfin_read32(TIMER11_COUNTER) +#define bfin_write_TIMER11_COUNTER(val) bfin_write32(TIMER11_COUNTER,val) +#define bfin_read_TIMER11_PERIOD() bfin_read32(TIMER11_PERIOD) +#define bfin_write_TIMER11_PERIOD(val) bfin_write32(TIMER11_PERIOD,val) +#define bfin_read_TIMER11_WIDTH() bfin_read32(TIMER11_WIDTH) +#define bfin_write_TIMER11_WIDTH(val) bfin_write32(TIMER11_WIDTH,val) +#define bfin_read_TMRS4_ENABLE() bfin_read16(TMRS4_ENABLE) +#define bfin_write_TMRS4_ENABLE(val) bfin_write16(TMRS4_ENABLE,val) +#define bfin_read_TMRS4_DISABLE() bfin_read16(TMRS4_DISABLE) +#define bfin_write_TMRS4_DISABLE(val) bfin_write16(TMRS4_DISABLE,val) +#define bfin_read_TMRS4_STATUS() bfin_read32(TMRS4_STATUS) +#define bfin_write_TMRS4_STATUS(val) bfin_write32(TMRS4_STATUS,val) + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define bfin_read_FIO0_FLAG_D() bfin_read16(FIO0_FLAG_D) +#define bfin_write_FIO0_FLAG_D(val) bfin_write16(FIO0_FLAG_D,val) +#define bfin_read_FIO0_FLAG_C() bfin_read16(FIO0_FLAG_C) +#define bfin_write_FIO0_FLAG_C(val) bfin_write16(FIO0_FLAG_C,val) +#define bfin_read_FIO0_FLAG_S() bfin_read16(FIO0_FLAG_S) +#define bfin_write_FIO0_FLAG_S(val) bfin_write16(FIO0_FLAG_S,val) +#define bfin_read_FIO0_FLAG_T() bfin_read16(FIO0_FLAG_T) +#define bfin_write_FIO0_FLAG_T(val) bfin_write16(FIO0_FLAG_T,val) +#define bfin_read_FIO0_MASKA_D() bfin_read16(FIO0_MASKA_D) +#define bfin_write_FIO0_MASKA_D(val) bfin_write16(FIO0_MASKA_D,val) +#define bfin_read_FIO0_MASKA_C() bfin_read16(FIO0_MASKA_C) +#define bfin_write_FIO0_MASKA_C(val) bfin_write16(FIO0_MASKA_C,val) +#define bfin_read_FIO0_MASKA_S() bfin_read16(FIO0_MASKA_S) +#define bfin_write_FIO0_MASKA_S(val) bfin_write16(FIO0_MASKA_S,val) +#define bfin_read_FIO0_MASKA_T() bfin_read16(FIO0_MASKA_T) +#define bfin_write_FIO0_MASKA_T(val) bfin_write16(FIO0_MASKA_T,val) +#define bfin_read_FIO0_MASKB_D() bfin_read16(FIO0_MASKB_D) +#define bfin_write_FIO0_MASKB_D(val) bfin_write16(FIO0_MASKB_D,val) +#define bfin_read_FIO0_MASKB_C() bfin_read16(FIO0_MASKB_C) +#define bfin_write_FIO0_MASKB_C(val) bfin_write16(FIO0_MASKB_C,val) +#define bfin_read_FIO0_MASKB_S() bfin_read16(FIO0_MASKB_S) +#define bfin_write_FIO0_MASKB_S(val) bfin_write16(FIO0_MASKB_S,val) +#define bfin_read_FIO0_MASKB_T() bfin_read16(FIO0_MASKB_T) +#define bfin_write_FIO0_MASKB_T(val) bfin_write16(FIO0_MASKB_T,val) +#define bfin_read_FIO0_DIR() bfin_read16(FIO0_DIR) +#define bfin_write_FIO0_DIR(val) bfin_write16(FIO0_DIR,val) +#define bfin_read_FIO0_POLAR() bfin_read16(FIO0_POLAR) +#define bfin_write_FIO0_POLAR(val) bfin_write16(FIO0_POLAR,val) +#define bfin_read_FIO0_EDGE() bfin_read16(FIO0_EDGE) +#define bfin_write_FIO0_EDGE(val) bfin_write16(FIO0_EDGE,val) +#define bfin_read_FIO0_BOTH() bfin_read16(FIO0_BOTH) +#define bfin_write_FIO0_BOTH(val) bfin_write16(FIO0_BOTH,val) +#define bfin_read_FIO0_INEN() bfin_read16(FIO0_INEN) +#define bfin_write_FIO0_INEN(val) bfin_write16(FIO0_INEN,val) +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define bfin_read_FIO1_FLAG_D() bfin_read16(FIO1_FLAG_D) +#define bfin_write_FIO1_FLAG_D(val) bfin_write16(FIO1_FLAG_D,val) +#define bfin_read_FIO1_FLAG_C() bfin_read16(FIO1_FLAG_C) +#define bfin_write_FIO1_FLAG_C(val) bfin_write16(FIO1_FLAG_C,val) +#define bfin_read_FIO1_FLAG_S() bfin_read16(FIO1_FLAG_S) +#define bfin_write_FIO1_FLAG_S(val) bfin_write16(FIO1_FLAG_S,val) +#define bfin_read_FIO1_FLAG_T() bfin_read16(FIO1_FLAG_T) +#define bfin_write_FIO1_FLAG_T(val) bfin_write16(FIO1_FLAG_T,val) +#define bfin_read_FIO1_MASKA_D() bfin_read16(FIO1_MASKA_D) +#define bfin_write_FIO1_MASKA_D(val) bfin_write16(FIO1_MASKA_D,val) +#define bfin_read_FIO1_MASKA_C() bfin_read16(FIO1_MASKA_C) +#define bfin_write_FIO1_MASKA_C(val) bfin_write16(FIO1_MASKA_C,val) +#define bfin_read_FIO1_MASKA_S() bfin_read16(FIO1_MASKA_S) +#define bfin_write_FIO1_MASKA_S(val) bfin_write16(FIO1_MASKA_S,val) +#define bfin_read_FIO1_MASKA_T() bfin_read16(FIO1_MASKA_T) +#define bfin_write_FIO1_MASKA_T(val) bfin_write16(FIO1_MASKA_T,val) +#define bfin_read_FIO1_MASKB_D() bfin_read16(FIO1_MASKB_D) +#define bfin_write_FIO1_MASKB_D(val) bfin_write16(FIO1_MASKB_D,val) +#define bfin_read_FIO1_MASKB_C() bfin_read16(FIO1_MASKB_C) +#define bfin_write_FIO1_MASKB_C(val) bfin_write16(FIO1_MASKB_C,val) +#define bfin_read_FIO1_MASKB_S() bfin_read16(FIO1_MASKB_S) +#define bfin_write_FIO1_MASKB_S(val) bfin_write16(FIO1_MASKB_S,val) +#define bfin_read_FIO1_MASKB_T() bfin_read16(FIO1_MASKB_T) +#define bfin_write_FIO1_MASKB_T(val) bfin_write16(FIO1_MASKB_T,val) +#define bfin_read_FIO1_DIR() bfin_read16(FIO1_DIR) +#define bfin_write_FIO1_DIR(val) bfin_write16(FIO1_DIR,val) +#define bfin_read_FIO1_POLAR() bfin_read16(FIO1_POLAR) +#define bfin_write_FIO1_POLAR(val) bfin_write16(FIO1_POLAR,val) +#define bfin_read_FIO1_EDGE() bfin_read16(FIO1_EDGE) +#define bfin_write_FIO1_EDGE(val) bfin_write16(FIO1_EDGE,val) +#define bfin_read_FIO1_BOTH() bfin_read16(FIO1_BOTH) +#define bfin_write_FIO1_BOTH(val) bfin_write16(FIO1_BOTH,val) +#define bfin_read_FIO1_INEN() bfin_read16(FIO1_INEN) +#define bfin_write_FIO1_INEN(val) bfin_write16(FIO1_INEN,val) +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define bfin_read_FIO2_FLAG_D() bfin_read16(FIO2_FLAG_D) +#define bfin_write_FIO2_FLAG_D(val) bfin_write16(FIO2_FLAG_D,val) +#define bfin_read_FIO2_FLAG_C() bfin_read16(FIO2_FLAG_C) +#define bfin_write_FIO2_FLAG_C(val) bfin_write16(FIO2_FLAG_C,val) +#define bfin_read_FIO2_FLAG_S() bfin_read16(FIO2_FLAG_S) +#define bfin_write_FIO2_FLAG_S(val) bfin_write16(FIO2_FLAG_S,val) +#define bfin_read_FIO2_FLAG_T() bfin_read16(FIO2_FLAG_T) +#define bfin_write_FIO2_FLAG_T(val) bfin_write16(FIO2_FLAG_T,val) +#define bfin_read_FIO2_MASKA_D() bfin_read16(FIO2_MASKA_D) +#define bfin_write_FIO2_MASKA_D(val) bfin_write16(FIO2_MASKA_D,val) +#define bfin_read_FIO2_MASKA_C() bfin_read16(FIO2_MASKA_C) +#define bfin_write_FIO2_MASKA_C(val) bfin_write16(FIO2_MASKA_C,val) +#define bfin_read_FIO2_MASKA_S() bfin_read16(FIO2_MASKA_S) +#define bfin_write_FIO2_MASKA_S(val) bfin_write16(FIO2_MASKA_S,val) +#define bfin_read_FIO2_MASKA_T() bfin_read16(FIO2_MASKA_T) +#define bfin_write_FIO2_MASKA_T(val) bfin_write16(FIO2_MASKA_T,val) +#define bfin_read_FIO2_MASKB_D() bfin_read16(FIO2_MASKB_D) +#define bfin_write_FIO2_MASKB_D(val) bfin_write16(FIO2_MASKB_D,val) +#define bfin_read_FIO2_MASKB_C() bfin_read16(FIO2_MASKB_C) +#define bfin_write_FIO2_MASKB_C(val) bfin_write16(FIO2_MASKB_C,val) +#define bfin_read_FIO2_MASKB_S() bfin_read16(FIO2_MASKB_S) +#define bfin_write_FIO2_MASKB_S(val) bfin_write16(FIO2_MASKB_S,val) +#define bfin_read_FIO2_MASKB_T() bfin_read16(FIO2_MASKB_T) +#define bfin_write_FIO2_MASKB_T(val) bfin_write16(FIO2_MASKB_T,val) +#define bfin_read_FIO2_DIR() bfin_read16(FIO2_DIR) +#define bfin_write_FIO2_DIR(val) bfin_write16(FIO2_DIR,val) +#define bfin_read_FIO2_POLAR() bfin_read16(FIO2_POLAR) +#define bfin_write_FIO2_POLAR(val) bfin_write16(FIO2_POLAR,val) +#define bfin_read_FIO2_EDGE() bfin_read16(FIO2_EDGE) +#define bfin_write_FIO2_EDGE(val) bfin_write16(FIO2_EDGE,val) +#define bfin_read_FIO2_BOTH() bfin_read16(FIO2_BOTH) +#define bfin_write_FIO2_BOTH(val) bfin_write16(FIO2_BOTH,val) +#define bfin_read_FIO2_INEN() bfin_read16(FIO2_INEN) +#define bfin_write_FIO2_INEN(val) bfin_write16(FIO2_INEN,val) +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDBCTL() bfin_read32(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write32(EBIU_SDBCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define bfin_read_PPI0_CONTROL() bfin_read16(PPI0_CONTROL) +#define bfin_write_PPI0_CONTROL(val) bfin_write16(PPI0_CONTROL,val) +#define bfin_read_PPI0_STATUS() bfin_read16(PPI0_STATUS) +#define bfin_write_PPI0_STATUS(val) bfin_write16(PPI0_STATUS,val) +#define bfin_clear_PPI0_STATUS() bfin_read_PPI0_STATUS() +#define bfin_read_PPI0_COUNT() bfin_read16(PPI0_COUNT) +#define bfin_write_PPI0_COUNT(val) bfin_write16(PPI0_COUNT,val) +#define bfin_read_PPI0_DELAY() bfin_read16(PPI0_DELAY) +#define bfin_write_PPI0_DELAY(val) bfin_write16(PPI0_DELAY,val) +#define bfin_read_PPI0_FRAME() bfin_read16(PPI0_FRAME) +#define bfin_write_PPI0_FRAME(val) bfin_write16(PPI0_FRAME,val) +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define bfin_read_PPI1_CONTROL() bfin_read16(PPI1_CONTROL) +#define bfin_write_PPI1_CONTROL(val) bfin_write16(PPI1_CONTROL,val) +#define bfin_read_PPI1_STATUS() bfin_read16(PPI1_STATUS) +#define bfin_write_PPI1_STATUS(val) bfin_write16(PPI1_STATUS,val) +#define bfin_clear_PPI1_STATUS() bfin_read_PPI1_STATUS() +#define bfin_read_PPI1_COUNT() bfin_read16(PPI1_COUNT) +#define bfin_write_PPI1_COUNT(val) bfin_write16(PPI1_COUNT,val) +#define bfin_read_PPI1_DELAY() bfin_read16(PPI1_DELAY) +#define bfin_write_PPI1_DELAY(val) bfin_write16(PPI1_DELAY,val) +#define bfin_read_PPI1_FRAME() bfin_read16(PPI1_FRAME) +#define bfin_write_PPI1_FRAME(val) bfin_write16(PPI1_FRAME,val) +/*DMA traffic control registers */ +#define bfin_read_DMA1_TC_PER() bfin_read16(DMA1_TC_PER) +#define bfin_write_DMA1_TC_PER(val) bfin_write16(DMA1_TC_PER,val) +#define bfin_read_DMA1_TC_CNT() bfin_read16(DMA1_TC_CNT) +#define bfin_write_DMA1_TC_CNT(val) bfin_write16(DMA1_TC_CNT,val) +#define bfin_read_DMA2_TC_PER() bfin_read16(DMA2_TC_PER) +#define bfin_write_DMA2_TC_PER(val) bfin_write16(DMA2_TC_PER,val) +#define bfin_read_DMA2_TC_CNT() bfin_read16(DMA2_TC_CNT) +#define bfin_write_DMA2_TC_CNT(val) bfin_write16(DMA2_TC_CNT,val) +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define bfin_read_DMA1_0_CONFIG() bfin_read16(DMA1_0_CONFIG) +#define bfin_write_DMA1_0_CONFIG(val) bfin_write16(DMA1_0_CONFIG,val) +#define bfin_read_DMA1_0_NEXT_DESC_PTR() bfin_read32(DMA1_0_NEXT_DESC_PTR) +#define bfin_write_DMA1_0_NEXT_DESC_PTR(val) bfin_write32(DMA1_0_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_0_START_ADDR() bfin_read32(DMA1_0_START_ADDR) +#define bfin_write_DMA1_0_START_ADDR(val) bfin_write32(DMA1_0_START_ADDR,val) +#define bfin_read_DMA1_0_X_COUNT() bfin_read16(DMA1_0_X_COUNT) +#define bfin_write_DMA1_0_X_COUNT(val) bfin_write16(DMA1_0_X_COUNT,val) +#define bfin_read_DMA1_0_Y_COUNT() bfin_read16(DMA1_0_Y_COUNT) +#define bfin_write_DMA1_0_Y_COUNT(val) bfin_write16(DMA1_0_Y_COUNT,val) +#define bfin_read_DMA1_0_X_MODIFY() bfin_read16(DMA1_0_X_MODIFY) +#define bfin_write_DMA1_0_X_MODIFY(val) bfin_write16(DMA1_0_X_MODIFY,val) +#define bfin_read_DMA1_0_Y_MODIFY() bfin_read16(DMA1_0_Y_MODIFY) +#define bfin_write_DMA1_0_Y_MODIFY(val) bfin_write16(DMA1_0_Y_MODIFY,val) +#define bfin_read_DMA1_0_CURR_DESC_PTR() bfin_read32(DMA1_0_CURR_DESC_PTR) +#define bfin_write_DMA1_0_CURR_DESC_PTR(val) bfin_write32(DMA1_0_CURR_DESC_PTR,val) +#define bfin_read_DMA1_0_CURR_ADDR() bfin_read32(DMA1_0_CURR_ADDR) +#define bfin_write_DMA1_0_CURR_ADDR(val) bfin_write32(DMA1_0_CURR_ADDR,val) +#define bfin_read_DMA1_0_CURR_X_COUNT() bfin_read16(DMA1_0_CURR_X_COUNT) +#define bfin_write_DMA1_0_CURR_X_COUNT(val) bfin_write16(DMA1_0_CURR_X_COUNT,val) +#define bfin_read_DMA1_0_CURR_Y_COUNT() bfin_read16(DMA1_0_CURR_Y_COUNT) +#define bfin_write_DMA1_0_CURR_Y_COUNT(val) bfin_write16(DMA1_0_CURR_Y_COUNT,val) +#define bfin_read_DMA1_0_IRQ_STATUS() bfin_read16(DMA1_0_IRQ_STATUS) +#define bfin_write_DMA1_0_IRQ_STATUS(val) bfin_write16(DMA1_0_IRQ_STATUS,val) +#define bfin_read_DMA1_0_PERIPHERAL_MAP() bfin_read16(DMA1_0_PERIPHERAL_MAP) +#define bfin_write_DMA1_0_PERIPHERAL_MAP(val) bfin_write16(DMA1_0_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_1_CONFIG() bfin_read16(DMA1_1_CONFIG) +#define bfin_write_DMA1_1_CONFIG(val) bfin_write16(DMA1_1_CONFIG,val) +#define bfin_read_DMA1_1_NEXT_DESC_PTR() bfin_read32(DMA1_1_NEXT_DESC_PTR) +#define bfin_write_DMA1_1_NEXT_DESC_PTR(val) bfin_write32(DMA1_1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_1_START_ADDR() bfin_read32(DMA1_1_START_ADDR) +#define bfin_write_DMA1_1_START_ADDR(val) bfin_write32(DMA1_1_START_ADDR,val) +#define bfin_read_DMA1_1_X_COUNT() bfin_read16(DMA1_1_X_COUNT) +#define bfin_write_DMA1_1_X_COUNT(val) bfin_write16(DMA1_1_X_COUNT,val) +#define bfin_read_DMA1_1_Y_COUNT() bfin_read16(DMA1_1_Y_COUNT) +#define bfin_write_DMA1_1_Y_COUNT(val) bfin_write16(DMA1_1_Y_COUNT,val) +#define bfin_read_DMA1_1_X_MODIFY() bfin_read16(DMA1_1_X_MODIFY) +#define bfin_write_DMA1_1_X_MODIFY(val) bfin_write16(DMA1_1_X_MODIFY,val) +#define bfin_read_DMA1_1_Y_MODIFY() bfin_read16(DMA1_1_Y_MODIFY) +#define bfin_write_DMA1_1_Y_MODIFY(val) bfin_write16(DMA1_1_Y_MODIFY,val) +#define bfin_read_DMA1_1_CURR_DESC_PTR() bfin_read32(DMA1_1_CURR_DESC_PTR) +#define bfin_write_DMA1_1_CURR_DESC_PTR(val) bfin_write32(DMA1_1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_1_CURR_ADDR() bfin_read32(DMA1_1_CURR_ADDR) +#define bfin_write_DMA1_1_CURR_ADDR(val) bfin_write32(DMA1_1_CURR_ADDR,val) +#define bfin_read_DMA1_1_CURR_X_COUNT() bfin_read16(DMA1_1_CURR_X_COUNT) +#define bfin_write_DMA1_1_CURR_X_COUNT(val) bfin_write16(DMA1_1_CURR_X_COUNT,val) +#define bfin_read_DMA1_1_CURR_Y_COUNT() bfin_read16(DMA1_1_CURR_Y_COUNT) +#define bfin_write_DMA1_1_CURR_Y_COUNT(val) bfin_write16(DMA1_1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_1_IRQ_STATUS() bfin_read16(DMA1_1_IRQ_STATUS) +#define bfin_write_DMA1_1_IRQ_STATUS(val) bfin_write16(DMA1_1_IRQ_STATUS,val) +#define bfin_read_DMA1_1_PERIPHERAL_MAP() bfin_read16(DMA1_1_PERIPHERAL_MAP) +#define bfin_write_DMA1_1_PERIPHERAL_MAP(val) bfin_write16(DMA1_1_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_2_CONFIG() bfin_read16(DMA1_2_CONFIG) +#define bfin_write_DMA1_2_CONFIG(val) bfin_write16(DMA1_2_CONFIG,val) +#define bfin_read_DMA1_2_NEXT_DESC_PTR() bfin_read32(DMA1_2_NEXT_DESC_PTR) +#define bfin_write_DMA1_2_NEXT_DESC_PTR(val) bfin_write32(DMA1_2_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_2_START_ADDR() bfin_read32(DMA1_2_START_ADDR) +#define bfin_write_DMA1_2_START_ADDR(val) bfin_write32(DMA1_2_START_ADDR,val) +#define bfin_read_DMA1_2_X_COUNT() bfin_read16(DMA1_2_X_COUNT) +#define bfin_write_DMA1_2_X_COUNT(val) bfin_write16(DMA1_2_X_COUNT,val) +#define bfin_read_DMA1_2_Y_COUNT() bfin_read16(DMA1_2_Y_COUNT) +#define bfin_write_DMA1_2_Y_COUNT(val) bfin_write16(DMA1_2_Y_COUNT,val) +#define bfin_read_DMA1_2_X_MODIFY() bfin_read16(DMA1_2_X_MODIFY) +#define bfin_write_DMA1_2_X_MODIFY(val) bfin_write16(DMA1_2_X_MODIFY,val) +#define bfin_read_DMA1_2_Y_MODIFY() bfin_read16(DMA1_2_Y_MODIFY) +#define bfin_write_DMA1_2_Y_MODIFY(val) bfin_write16(DMA1_2_Y_MODIFY,val) +#define bfin_read_DMA1_2_CURR_DESC_PTR() bfin_read32(DMA1_2_CURR_DESC_PTR) +#define bfin_write_DMA1_2_CURR_DESC_PTR(val) bfin_write32(DMA1_2_CURR_DESC_PTR,val) +#define bfin_read_DMA1_2_CURR_ADDR() bfin_read32(DMA1_2_CURR_ADDR) +#define bfin_write_DMA1_2_CURR_ADDR(val) bfin_write32(DMA1_2_CURR_ADDR,val) +#define bfin_read_DMA1_2_CURR_X_COUNT() bfin_read16(DMA1_2_CURR_X_COUNT) +#define bfin_write_DMA1_2_CURR_X_COUNT(val) bfin_write16(DMA1_2_CURR_X_COUNT,val) +#define bfin_read_DMA1_2_CURR_Y_COUNT() bfin_read16(DMA1_2_CURR_Y_COUNT) +#define bfin_write_DMA1_2_CURR_Y_COUNT(val) bfin_write16(DMA1_2_CURR_Y_COUNT,val) +#define bfin_read_DMA1_2_IRQ_STATUS() bfin_read16(DMA1_2_IRQ_STATUS) +#define bfin_write_DMA1_2_IRQ_STATUS(val) bfin_write16(DMA1_2_IRQ_STATUS,val) +#define bfin_read_DMA1_2_PERIPHERAL_MAP() bfin_read16(DMA1_2_PERIPHERAL_MAP) +#define bfin_write_DMA1_2_PERIPHERAL_MAP(val) bfin_write16(DMA1_2_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_3_CONFIG() bfin_read16(DMA1_3_CONFIG) +#define bfin_write_DMA1_3_CONFIG(val) bfin_write16(DMA1_3_CONFIG,val) +#define bfin_read_DMA1_3_NEXT_DESC_PTR() bfin_read32(DMA1_3_NEXT_DESC_PTR) +#define bfin_write_DMA1_3_NEXT_DESC_PTR(val) bfin_write32(DMA1_3_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_3_START_ADDR() bfin_read32(DMA1_3_START_ADDR) +#define bfin_write_DMA1_3_START_ADDR(val) bfin_write32(DMA1_3_START_ADDR,val) +#define bfin_read_DMA1_3_X_COUNT() bfin_read16(DMA1_3_X_COUNT) +#define bfin_write_DMA1_3_X_COUNT(val) bfin_write16(DMA1_3_X_COUNT,val) +#define bfin_read_DMA1_3_Y_COUNT() bfin_read16(DMA1_3_Y_COUNT) +#define bfin_write_DMA1_3_Y_COUNT(val) bfin_write16(DMA1_3_Y_COUNT,val) +#define bfin_read_DMA1_3_X_MODIFY() bfin_read16(DMA1_3_X_MODIFY) +#define bfin_write_DMA1_3_X_MODIFY(val) bfin_write16(DMA1_3_X_MODIFY,val) +#define bfin_read_DMA1_3_Y_MODIFY() bfin_read16(DMA1_3_Y_MODIFY) +#define bfin_write_DMA1_3_Y_MODIFY(val) bfin_write16(DMA1_3_Y_MODIFY,val) +#define bfin_read_DMA1_3_CURR_DESC_PTR() bfin_read32(DMA1_3_CURR_DESC_PTR) +#define bfin_write_DMA1_3_CURR_DESC_PTR(val) bfin_write32(DMA1_3_CURR_DESC_PTR,val) +#define bfin_read_DMA1_3_CURR_ADDR() bfin_read32(DMA1_3_CURR_ADDR) +#define bfin_write_DMA1_3_CURR_ADDR(val) bfin_write32(DMA1_3_CURR_ADDR,val) +#define bfin_read_DMA1_3_CURR_X_COUNT() bfin_read16(DMA1_3_CURR_X_COUNT) +#define bfin_write_DMA1_3_CURR_X_COUNT(val) bfin_write16(DMA1_3_CURR_X_COUNT,val) +#define bfin_read_DMA1_3_CURR_Y_COUNT() bfin_read16(DMA1_3_CURR_Y_COUNT) +#define bfin_write_DMA1_3_CURR_Y_COUNT(val) bfin_write16(DMA1_3_CURR_Y_COUNT,val) +#define bfin_read_DMA1_3_IRQ_STATUS() bfin_read16(DMA1_3_IRQ_STATUS) +#define bfin_write_DMA1_3_IRQ_STATUS(val) bfin_write16(DMA1_3_IRQ_STATUS,val) +#define bfin_read_DMA1_3_PERIPHERAL_MAP() bfin_read16(DMA1_3_PERIPHERAL_MAP) +#define bfin_write_DMA1_3_PERIPHERAL_MAP(val) bfin_write16(DMA1_3_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_4_CONFIG() bfin_read16(DMA1_4_CONFIG) +#define bfin_write_DMA1_4_CONFIG(val) bfin_write16(DMA1_4_CONFIG,val) +#define bfin_read_DMA1_4_NEXT_DESC_PTR() bfin_read32(DMA1_4_NEXT_DESC_PTR) +#define bfin_write_DMA1_4_NEXT_DESC_PTR(val) bfin_write32(DMA1_4_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_4_START_ADDR() bfin_read32(DMA1_4_START_ADDR) +#define bfin_write_DMA1_4_START_ADDR(val) bfin_write32(DMA1_4_START_ADDR,val) +#define bfin_read_DMA1_4_X_COUNT() bfin_read16(DMA1_4_X_COUNT) +#define bfin_write_DMA1_4_X_COUNT(val) bfin_write16(DMA1_4_X_COUNT,val) +#define bfin_read_DMA1_4_Y_COUNT() bfin_read16(DMA1_4_Y_COUNT) +#define bfin_write_DMA1_4_Y_COUNT(val) bfin_write16(DMA1_4_Y_COUNT,val) +#define bfin_read_DMA1_4_X_MODIFY() bfin_read16(DMA1_4_X_MODIFY) +#define bfin_write_DMA1_4_X_MODIFY(val) bfin_write16(DMA1_4_X_MODIFY,val) +#define bfin_read_DMA1_4_Y_MODIFY() bfin_read16(DMA1_4_Y_MODIFY) +#define bfin_write_DMA1_4_Y_MODIFY(val) bfin_write16(DMA1_4_Y_MODIFY,val) +#define bfin_read_DMA1_4_CURR_DESC_PTR() bfin_read32(DMA1_4_CURR_DESC_PTR) +#define bfin_write_DMA1_4_CURR_DESC_PTR(val) bfin_write32(DMA1_4_CURR_DESC_PTR,val) +#define bfin_read_DMA1_4_CURR_ADDR() bfin_read32(DMA1_4_CURR_ADDR) +#define bfin_write_DMA1_4_CURR_ADDR(val) bfin_write32(DMA1_4_CURR_ADDR,val) +#define bfin_read_DMA1_4_CURR_X_COUNT() bfin_read16(DMA1_4_CURR_X_COUNT) +#define bfin_write_DMA1_4_CURR_X_COUNT(val) bfin_write16(DMA1_4_CURR_X_COUNT,val) +#define bfin_read_DMA1_4_CURR_Y_COUNT() bfin_read16(DMA1_4_CURR_Y_COUNT) +#define bfin_write_DMA1_4_CURR_Y_COUNT(val) bfin_write16(DMA1_4_CURR_Y_COUNT,val) +#define bfin_read_DMA1_4_IRQ_STATUS() bfin_read16(DMA1_4_IRQ_STATUS) +#define bfin_write_DMA1_4_IRQ_STATUS(val) bfin_write16(DMA1_4_IRQ_STATUS,val) +#define bfin_read_DMA1_4_PERIPHERAL_MAP() bfin_read16(DMA1_4_PERIPHERAL_MAP) +#define bfin_write_DMA1_4_PERIPHERAL_MAP(val) bfin_write16(DMA1_4_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_5_CONFIG() bfin_read16(DMA1_5_CONFIG) +#define bfin_write_DMA1_5_CONFIG(val) bfin_write16(DMA1_5_CONFIG,val) +#define bfin_read_DMA1_5_NEXT_DESC_PTR() bfin_read32(DMA1_5_NEXT_DESC_PTR) +#define bfin_write_DMA1_5_NEXT_DESC_PTR(val) bfin_write32(DMA1_5_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_5_START_ADDR() bfin_read32(DMA1_5_START_ADDR) +#define bfin_write_DMA1_5_START_ADDR(val) bfin_write32(DMA1_5_START_ADDR,val) +#define bfin_read_DMA1_5_X_COUNT() bfin_read16(DMA1_5_X_COUNT) +#define bfin_write_DMA1_5_X_COUNT(val) bfin_write16(DMA1_5_X_COUNT,val) +#define bfin_read_DMA1_5_Y_COUNT() bfin_read16(DMA1_5_Y_COUNT) +#define bfin_write_DMA1_5_Y_COUNT(val) bfin_write16(DMA1_5_Y_COUNT,val) +#define bfin_read_DMA1_5_X_MODIFY() bfin_read16(DMA1_5_X_MODIFY) +#define bfin_write_DMA1_5_X_MODIFY(val) bfin_write16(DMA1_5_X_MODIFY,val) +#define bfin_read_DMA1_5_Y_MODIFY() bfin_read16(DMA1_5_Y_MODIFY) +#define bfin_write_DMA1_5_Y_MODIFY(val) bfin_write16(DMA1_5_Y_MODIFY,val) +#define bfin_read_DMA1_5_CURR_DESC_PTR() bfin_read32(DMA1_5_CURR_DESC_PTR) +#define bfin_write_DMA1_5_CURR_DESC_PTR(val) bfin_write32(DMA1_5_CURR_DESC_PTR,val) +#define bfin_read_DMA1_5_CURR_ADDR() bfin_read32(DMA1_5_CURR_ADDR) +#define bfin_write_DMA1_5_CURR_ADDR(val) bfin_write32(DMA1_5_CURR_ADDR,val) +#define bfin_read_DMA1_5_CURR_X_COUNT() bfin_read16(DMA1_5_CURR_X_COUNT) +#define bfin_write_DMA1_5_CURR_X_COUNT(val) bfin_write16(DMA1_5_CURR_X_COUNT,val) +#define bfin_read_DMA1_5_CURR_Y_COUNT() bfin_read16(DMA1_5_CURR_Y_COUNT) +#define bfin_write_DMA1_5_CURR_Y_COUNT(val) bfin_write16(DMA1_5_CURR_Y_COUNT,val) +#define bfin_read_DMA1_5_IRQ_STATUS() bfin_read16(DMA1_5_IRQ_STATUS) +#define bfin_write_DMA1_5_IRQ_STATUS(val) bfin_write16(DMA1_5_IRQ_STATUS,val) +#define bfin_read_DMA1_5_PERIPHERAL_MAP() bfin_read16(DMA1_5_PERIPHERAL_MAP) +#define bfin_write_DMA1_5_PERIPHERAL_MAP(val) bfin_write16(DMA1_5_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_6_CONFIG() bfin_read16(DMA1_6_CONFIG) +#define bfin_write_DMA1_6_CONFIG(val) bfin_write16(DMA1_6_CONFIG,val) +#define bfin_read_DMA1_6_NEXT_DESC_PTR() bfin_read32(DMA1_6_NEXT_DESC_PTR) +#define bfin_write_DMA1_6_NEXT_DESC_PTR(val) bfin_write32(DMA1_6_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_6_START_ADDR() bfin_read32(DMA1_6_START_ADDR) +#define bfin_write_DMA1_6_START_ADDR(val) bfin_write32(DMA1_6_START_ADDR,val) +#define bfin_read_DMA1_6_X_COUNT() bfin_read16(DMA1_6_X_COUNT) +#define bfin_write_DMA1_6_X_COUNT(val) bfin_write16(DMA1_6_X_COUNT,val) +#define bfin_read_DMA1_6_Y_COUNT() bfin_read16(DMA1_6_Y_COUNT) +#define bfin_write_DMA1_6_Y_COUNT(val) bfin_write16(DMA1_6_Y_COUNT,val) +#define bfin_read_DMA1_6_X_MODIFY() bfin_read16(DMA1_6_X_MODIFY) +#define bfin_write_DMA1_6_X_MODIFY(val) bfin_write16(DMA1_6_X_MODIFY,val) +#define bfin_read_DMA1_6_Y_MODIFY() bfin_read16(DMA1_6_Y_MODIFY) +#define bfin_write_DMA1_6_Y_MODIFY(val) bfin_write16(DMA1_6_Y_MODIFY,val) +#define bfin_read_DMA1_6_CURR_DESC_PTR() bfin_read32(DMA1_6_CURR_DESC_PTR) +#define bfin_write_DMA1_6_CURR_DESC_PTR(val) bfin_write32(DMA1_6_CURR_DESC_PTR,val) +#define bfin_read_DMA1_6_CURR_ADDR() bfin_read32(DMA1_6_CURR_ADDR) +#define bfin_write_DMA1_6_CURR_ADDR(val) bfin_write32(DMA1_6_CURR_ADDR,val) +#define bfin_read_DMA1_6_CURR_X_COUNT() bfin_read16(DMA1_6_CURR_X_COUNT) +#define bfin_write_DMA1_6_CURR_X_COUNT(val) bfin_write16(DMA1_6_CURR_X_COUNT,val) +#define bfin_read_DMA1_6_CURR_Y_COUNT() bfin_read16(DMA1_6_CURR_Y_COUNT) +#define bfin_write_DMA1_6_CURR_Y_COUNT(val) bfin_write16(DMA1_6_CURR_Y_COUNT,val) +#define bfin_read_DMA1_6_IRQ_STATUS() bfin_read16(DMA1_6_IRQ_STATUS) +#define bfin_write_DMA1_6_IRQ_STATUS(val) bfin_write16(DMA1_6_IRQ_STATUS,val) +#define bfin_read_DMA1_6_PERIPHERAL_MAP() bfin_read16(DMA1_6_PERIPHERAL_MAP) +#define bfin_write_DMA1_6_PERIPHERAL_MAP(val) bfin_write16(DMA1_6_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_7_CONFIG() bfin_read16(DMA1_7_CONFIG) +#define bfin_write_DMA1_7_CONFIG(val) bfin_write16(DMA1_7_CONFIG,val) +#define bfin_read_DMA1_7_NEXT_DESC_PTR() bfin_read32(DMA1_7_NEXT_DESC_PTR) +#define bfin_write_DMA1_7_NEXT_DESC_PTR(val) bfin_write32(DMA1_7_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_7_START_ADDR() bfin_read32(DMA1_7_START_ADDR) +#define bfin_write_DMA1_7_START_ADDR(val) bfin_write32(DMA1_7_START_ADDR,val) +#define bfin_read_DMA1_7_X_COUNT() bfin_read16(DMA1_7_X_COUNT) +#define bfin_write_DMA1_7_X_COUNT(val) bfin_write16(DMA1_7_X_COUNT,val) +#define bfin_read_DMA1_7_Y_COUNT() bfin_read16(DMA1_7_Y_COUNT) +#define bfin_write_DMA1_7_Y_COUNT(val) bfin_write16(DMA1_7_Y_COUNT,val) +#define bfin_read_DMA1_7_X_MODIFY() bfin_read16(DMA1_7_X_MODIFY) +#define bfin_write_DMA1_7_X_MODIFY(val) bfin_write16(DMA1_7_X_MODIFY,val) +#define bfin_read_DMA1_7_Y_MODIFY() bfin_read16(DMA1_7_Y_MODIFY) +#define bfin_write_DMA1_7_Y_MODIFY(val) bfin_write16(DMA1_7_Y_MODIFY,val) +#define bfin_read_DMA1_7_CURR_DESC_PTR() bfin_read32(DMA1_7_CURR_DESC_PTR) +#define bfin_write_DMA1_7_CURR_DESC_PTR(val) bfin_write32(DMA1_7_CURR_DESC_PTR,val) +#define bfin_read_DMA1_7_CURR_ADDR() bfin_read32(DMA1_7_CURR_ADDR) +#define bfin_write_DMA1_7_CURR_ADDR(val) bfin_write32(DMA1_7_CURR_ADDR,val) +#define bfin_read_DMA1_7_CURR_X_COUNT() bfin_read16(DMA1_7_CURR_X_COUNT) +#define bfin_write_DMA1_7_CURR_X_COUNT(val) bfin_write16(DMA1_7_CURR_X_COUNT,val) +#define bfin_read_DMA1_7_CURR_Y_COUNT() bfin_read16(DMA1_7_CURR_Y_COUNT) +#define bfin_write_DMA1_7_CURR_Y_COUNT(val) bfin_write16(DMA1_7_CURR_Y_COUNT,val) +#define bfin_read_DMA1_7_IRQ_STATUS() bfin_read16(DMA1_7_IRQ_STATUS) +#define bfin_write_DMA1_7_IRQ_STATUS(val) bfin_write16(DMA1_7_IRQ_STATUS,val) +#define bfin_read_DMA1_7_PERIPHERAL_MAP() bfin_read16(DMA1_7_PERIPHERAL_MAP) +#define bfin_write_DMA1_7_PERIPHERAL_MAP(val) bfin_write16(DMA1_7_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_8_CONFIG() bfin_read16(DMA1_8_CONFIG) +#define bfin_write_DMA1_8_CONFIG(val) bfin_write16(DMA1_8_CONFIG,val) +#define bfin_read_DMA1_8_NEXT_DESC_PTR() bfin_read32(DMA1_8_NEXT_DESC_PTR) +#define bfin_write_DMA1_8_NEXT_DESC_PTR(val) bfin_write32(DMA1_8_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_8_START_ADDR() bfin_read32(DMA1_8_START_ADDR) +#define bfin_write_DMA1_8_START_ADDR(val) bfin_write32(DMA1_8_START_ADDR,val) +#define bfin_read_DMA1_8_X_COUNT() bfin_read16(DMA1_8_X_COUNT) +#define bfin_write_DMA1_8_X_COUNT(val) bfin_write16(DMA1_8_X_COUNT,val) +#define bfin_read_DMA1_8_Y_COUNT() bfin_read16(DMA1_8_Y_COUNT) +#define bfin_write_DMA1_8_Y_COUNT(val) bfin_write16(DMA1_8_Y_COUNT,val) +#define bfin_read_DMA1_8_X_MODIFY() bfin_read16(DMA1_8_X_MODIFY) +#define bfin_write_DMA1_8_X_MODIFY(val) bfin_write16(DMA1_8_X_MODIFY,val) +#define bfin_read_DMA1_8_Y_MODIFY() bfin_read16(DMA1_8_Y_MODIFY) +#define bfin_write_DMA1_8_Y_MODIFY(val) bfin_write16(DMA1_8_Y_MODIFY,val) +#define bfin_read_DMA1_8_CURR_DESC_PTR() bfin_read32(DMA1_8_CURR_DESC_PTR) +#define bfin_write_DMA1_8_CURR_DESC_PTR(val) bfin_write32(DMA1_8_CURR_DESC_PTR,val) +#define bfin_read_DMA1_8_CURR_ADDR() bfin_read32(DMA1_8_CURR_ADDR) +#define bfin_write_DMA1_8_CURR_ADDR(val) bfin_write32(DMA1_8_CURR_ADDR,val) +#define bfin_read_DMA1_8_CURR_X_COUNT() bfin_read16(DMA1_8_CURR_X_COUNT) +#define bfin_write_DMA1_8_CURR_X_COUNT(val) bfin_write16(DMA1_8_CURR_X_COUNT,val) +#define bfin_read_DMA1_8_CURR_Y_COUNT() bfin_read16(DMA1_8_CURR_Y_COUNT) +#define bfin_write_DMA1_8_CURR_Y_COUNT(val) bfin_write16(DMA1_8_CURR_Y_COUNT,val) +#define bfin_read_DMA1_8_IRQ_STATUS() bfin_read16(DMA1_8_IRQ_STATUS) +#define bfin_write_DMA1_8_IRQ_STATUS(val) bfin_write16(DMA1_8_IRQ_STATUS,val) +#define bfin_read_DMA1_8_PERIPHERAL_MAP() bfin_read16(DMA1_8_PERIPHERAL_MAP) +#define bfin_write_DMA1_8_PERIPHERAL_MAP(val) bfin_write16(DMA1_8_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_9_CONFIG() bfin_read16(DMA1_9_CONFIG) +#define bfin_write_DMA1_9_CONFIG(val) bfin_write16(DMA1_9_CONFIG,val) +#define bfin_read_DMA1_9_NEXT_DESC_PTR() bfin_read32(DMA1_9_NEXT_DESC_PTR) +#define bfin_write_DMA1_9_NEXT_DESC_PTR(val) bfin_write32(DMA1_9_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_9_START_ADDR() bfin_read32(DMA1_9_START_ADDR) +#define bfin_write_DMA1_9_START_ADDR(val) bfin_write32(DMA1_9_START_ADDR,val) +#define bfin_read_DMA1_9_X_COUNT() bfin_read16(DMA1_9_X_COUNT) +#define bfin_write_DMA1_9_X_COUNT(val) bfin_write16(DMA1_9_X_COUNT,val) +#define bfin_read_DMA1_9_Y_COUNT() bfin_read16(DMA1_9_Y_COUNT) +#define bfin_write_DMA1_9_Y_COUNT(val) bfin_write16(DMA1_9_Y_COUNT,val) +#define bfin_read_DMA1_9_X_MODIFY() bfin_read16(DMA1_9_X_MODIFY) +#define bfin_write_DMA1_9_X_MODIFY(val) bfin_write16(DMA1_9_X_MODIFY,val) +#define bfin_read_DMA1_9_Y_MODIFY() bfin_read16(DMA1_9_Y_MODIFY) +#define bfin_write_DMA1_9_Y_MODIFY(val) bfin_write16(DMA1_9_Y_MODIFY,val) +#define bfin_read_DMA1_9_CURR_DESC_PTR() bfin_read32(DMA1_9_CURR_DESC_PTR) +#define bfin_write_DMA1_9_CURR_DESC_PTR(val) bfin_write32(DMA1_9_CURR_DESC_PTR,val) +#define bfin_read_DMA1_9_CURR_ADDR() bfin_read32(DMA1_9_CURR_ADDR) +#define bfin_write_DMA1_9_CURR_ADDR(val) bfin_write32(DMA1_9_CURR_ADDR,val) +#define bfin_read_DMA1_9_CURR_X_COUNT() bfin_read16(DMA1_9_CURR_X_COUNT) +#define bfin_write_DMA1_9_CURR_X_COUNT(val) bfin_write16(DMA1_9_CURR_X_COUNT,val) +#define bfin_read_DMA1_9_CURR_Y_COUNT() bfin_read16(DMA1_9_CURR_Y_COUNT) +#define bfin_write_DMA1_9_CURR_Y_COUNT(val) bfin_write16(DMA1_9_CURR_Y_COUNT,val) +#define bfin_read_DMA1_9_IRQ_STATUS() bfin_read16(DMA1_9_IRQ_STATUS) +#define bfin_write_DMA1_9_IRQ_STATUS(val) bfin_write16(DMA1_9_IRQ_STATUS,val) +#define bfin_read_DMA1_9_PERIPHERAL_MAP() bfin_read16(DMA1_9_PERIPHERAL_MAP) +#define bfin_write_DMA1_9_PERIPHERAL_MAP(val) bfin_write16(DMA1_9_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_10_CONFIG() bfin_read16(DMA1_10_CONFIG) +#define bfin_write_DMA1_10_CONFIG(val) bfin_write16(DMA1_10_CONFIG,val) +#define bfin_read_DMA1_10_NEXT_DESC_PTR() bfin_read32(DMA1_10_NEXT_DESC_PTR) +#define bfin_write_DMA1_10_NEXT_DESC_PTR(val) bfin_write32(DMA1_10_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_10_START_ADDR() bfin_read32(DMA1_10_START_ADDR) +#define bfin_write_DMA1_10_START_ADDR(val) bfin_write32(DMA1_10_START_ADDR,val) +#define bfin_read_DMA1_10_X_COUNT() bfin_read16(DMA1_10_X_COUNT) +#define bfin_write_DMA1_10_X_COUNT(val) bfin_write16(DMA1_10_X_COUNT,val) +#define bfin_read_DMA1_10_Y_COUNT() bfin_read16(DMA1_10_Y_COUNT) +#define bfin_write_DMA1_10_Y_COUNT(val) bfin_write16(DMA1_10_Y_COUNT,val) +#define bfin_read_DMA1_10_X_MODIFY() bfin_read16(DMA1_10_X_MODIFY) +#define bfin_write_DMA1_10_X_MODIFY(val) bfin_write16(DMA1_10_X_MODIFY,val) +#define bfin_read_DMA1_10_Y_MODIFY() bfin_read16(DMA1_10_Y_MODIFY) +#define bfin_write_DMA1_10_Y_MODIFY(val) bfin_write16(DMA1_10_Y_MODIFY,val) +#define bfin_read_DMA1_10_CURR_DESC_PTR() bfin_read32(DMA1_10_CURR_DESC_PTR) +#define bfin_write_DMA1_10_CURR_DESC_PTR(val) bfin_write32(DMA1_10_CURR_DESC_PTR,val) +#define bfin_read_DMA1_10_CURR_ADDR() bfin_read32(DMA1_10_CURR_ADDR) +#define bfin_write_DMA1_10_CURR_ADDR(val) bfin_write32(DMA1_10_CURR_ADDR,val) +#define bfin_read_DMA1_10_CURR_X_COUNT() bfin_read16(DMA1_10_CURR_X_COUNT) +#define bfin_write_DMA1_10_CURR_X_COUNT(val) bfin_write16(DMA1_10_CURR_X_COUNT,val) +#define bfin_read_DMA1_10_CURR_Y_COUNT() bfin_read16(DMA1_10_CURR_Y_COUNT) +#define bfin_write_DMA1_10_CURR_Y_COUNT(val) bfin_write16(DMA1_10_CURR_Y_COUNT,val) +#define bfin_read_DMA1_10_IRQ_STATUS() bfin_read16(DMA1_10_IRQ_STATUS) +#define bfin_write_DMA1_10_IRQ_STATUS(val) bfin_write16(DMA1_10_IRQ_STATUS,val) +#define bfin_read_DMA1_10_PERIPHERAL_MAP() bfin_read16(DMA1_10_PERIPHERAL_MAP) +#define bfin_write_DMA1_10_PERIPHERAL_MAP(val) bfin_write16(DMA1_10_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_11_CONFIG() bfin_read16(DMA1_11_CONFIG) +#define bfin_write_DMA1_11_CONFIG(val) bfin_write16(DMA1_11_CONFIG,val) +#define bfin_read_DMA1_11_NEXT_DESC_PTR() bfin_read32(DMA1_11_NEXT_DESC_PTR) +#define bfin_write_DMA1_11_NEXT_DESC_PTR(val) bfin_write32(DMA1_11_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_11_START_ADDR() bfin_read32(DMA1_11_START_ADDR) +#define bfin_write_DMA1_11_START_ADDR(val) bfin_write32(DMA1_11_START_ADDR,val) +#define bfin_read_DMA1_11_X_COUNT() bfin_read16(DMA1_11_X_COUNT) +#define bfin_write_DMA1_11_X_COUNT(val) bfin_write16(DMA1_11_X_COUNT,val) +#define bfin_read_DMA1_11_Y_COUNT() bfin_read16(DMA1_11_Y_COUNT) +#define bfin_write_DMA1_11_Y_COUNT(val) bfin_write16(DMA1_11_Y_COUNT,val) +#define bfin_read_DMA1_11_X_MODIFY() bfin_read16(DMA1_11_X_MODIFY) +#define bfin_write_DMA1_11_X_MODIFY(val) bfin_write16(DMA1_11_X_MODIFY,val) +#define bfin_read_DMA1_11_Y_MODIFY() bfin_read16(DMA1_11_Y_MODIFY) +#define bfin_write_DMA1_11_Y_MODIFY(val) bfin_write16(DMA1_11_Y_MODIFY,val) +#define bfin_read_DMA1_11_CURR_DESC_PTR() bfin_read32(DMA1_11_CURR_DESC_PTR) +#define bfin_write_DMA1_11_CURR_DESC_PTR(val) bfin_write32(DMA1_11_CURR_DESC_PTR,val) +#define bfin_read_DMA1_11_CURR_ADDR() bfin_read32(DMA1_11_CURR_ADDR) +#define bfin_write_DMA1_11_CURR_ADDR(val) bfin_write32(DMA1_11_CURR_ADDR,val) +#define bfin_read_DMA1_11_CURR_X_COUNT() bfin_read16(DMA1_11_CURR_X_COUNT) +#define bfin_write_DMA1_11_CURR_X_COUNT(val) bfin_write16(DMA1_11_CURR_X_COUNT,val) +#define bfin_read_DMA1_11_CURR_Y_COUNT() bfin_read16(DMA1_11_CURR_Y_COUNT) +#define bfin_write_DMA1_11_CURR_Y_COUNT(val) bfin_write16(DMA1_11_CURR_Y_COUNT,val) +#define bfin_read_DMA1_11_IRQ_STATUS() bfin_read16(DMA1_11_IRQ_STATUS) +#define bfin_write_DMA1_11_IRQ_STATUS(val) bfin_write16(DMA1_11_IRQ_STATUS,val) +#define bfin_read_DMA1_11_PERIPHERAL_MAP() bfin_read16(DMA1_11_PERIPHERAL_MAP) +#define bfin_write_DMA1_11_PERIPHERAL_MAP(val) bfin_write16(DMA1_11_PERIPHERAL_MAP,val) +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define bfin_read_MDMA1_D0_CONFIG() bfin_read16(MDMA1_D0_CONFIG) +#define bfin_write_MDMA1_D0_CONFIG(val) bfin_write16(MDMA1_D0_CONFIG,val) +#define bfin_read_MDMA1_D0_NEXT_DESC_PTR() bfin_read32(MDMA1_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_D0_START_ADDR() bfin_read32(MDMA1_D0_START_ADDR) +#define bfin_write_MDMA1_D0_START_ADDR(val) bfin_write32(MDMA1_D0_START_ADDR,val) +#define bfin_read_MDMA1_D0_X_COUNT() bfin_read16(MDMA1_D0_X_COUNT) +#define bfin_write_MDMA1_D0_X_COUNT(val) bfin_write16(MDMA1_D0_X_COUNT,val) +#define bfin_read_MDMA1_D0_Y_COUNT() bfin_read16(MDMA1_D0_Y_COUNT) +#define bfin_write_MDMA1_D0_Y_COUNT(val) bfin_write16(MDMA1_D0_Y_COUNT,val) +#define bfin_read_MDMA1_D0_X_MODIFY() bfin_read16(MDMA1_D0_X_MODIFY) +#define bfin_write_MDMA1_D0_X_MODIFY(val) bfin_write16(MDMA1_D0_X_MODIFY,val) +#define bfin_read_MDMA1_D0_Y_MODIFY() bfin_read16(MDMA1_D0_Y_MODIFY) +#define bfin_write_MDMA1_D0_Y_MODIFY(val) bfin_write16(MDMA1_D0_Y_MODIFY,val) +#define bfin_read_MDMA1_D0_CURR_DESC_PTR() bfin_read32(MDMA1_D0_CURR_DESC_PTR) +#define bfin_write_MDMA1_D0_CURR_DESC_PTR(val) bfin_write32(MDMA1_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_D0_CURR_ADDR() bfin_read32(MDMA1_D0_CURR_ADDR) +#define bfin_write_MDMA1_D0_CURR_ADDR(val) bfin_write32(MDMA1_D0_CURR_ADDR,val) +#define bfin_read_MDMA1_D0_CURR_X_COUNT() bfin_read16(MDMA1_D0_CURR_X_COUNT) +#define bfin_write_MDMA1_D0_CURR_X_COUNT(val) bfin_write16(MDMA1_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA1_D0_CURR_Y_COUNT() bfin_read16(MDMA1_D0_CURR_Y_COUNT) +#define bfin_write_MDMA1_D0_CURR_Y_COUNT(val) bfin_write16(MDMA1_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_D0_IRQ_STATUS() bfin_read16(MDMA1_D0_IRQ_STATUS) +#define bfin_write_MDMA1_D0_IRQ_STATUS(val) bfin_write16(MDMA1_D0_IRQ_STATUS,val) +#define bfin_read_MDMA1_D0_PERIPHERAL_MAP() bfin_read16(MDMA1_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_S0_CONFIG() bfin_read16(MDMA1_S0_CONFIG) +#define bfin_write_MDMA1_S0_CONFIG(val) bfin_write16(MDMA1_S0_CONFIG,val) +#define bfin_read_MDMA1_S0_NEXT_DESC_PTR() bfin_read32(MDMA1_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_S0_START_ADDR() bfin_read32(MDMA1_S0_START_ADDR) +#define bfin_write_MDMA1_S0_START_ADDR(val) bfin_write32(MDMA1_S0_START_ADDR,val) +#define bfin_read_MDMA1_S0_X_COUNT() bfin_read16(MDMA1_S0_X_COUNT) +#define bfin_write_MDMA1_S0_X_COUNT(val) bfin_write16(MDMA1_S0_X_COUNT,val) +#define bfin_read_MDMA1_S0_Y_COUNT() bfin_read16(MDMA1_S0_Y_COUNT) +#define bfin_write_MDMA1_S0_Y_COUNT(val) bfin_write16(MDMA1_S0_Y_COUNT,val) +#define bfin_read_MDMA1_S0_X_MODIFY() bfin_read16(MDMA1_S0_X_MODIFY) +#define bfin_write_MDMA1_S0_X_MODIFY(val) bfin_write16(MDMA1_S0_X_MODIFY,val) +#define bfin_read_MDMA1_S0_Y_MODIFY() bfin_read16(MDMA1_S0_Y_MODIFY) +#define bfin_write_MDMA1_S0_Y_MODIFY(val) bfin_write16(MDMA1_S0_Y_MODIFY,val) +#define bfin_read_MDMA1_S0_CURR_DESC_PTR() bfin_read32(MDMA1_S0_CURR_DESC_PTR) +#define bfin_write_MDMA1_S0_CURR_DESC_PTR(val) bfin_write32(MDMA1_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_S0_CURR_ADDR() bfin_read32(MDMA1_S0_CURR_ADDR) +#define bfin_write_MDMA1_S0_CURR_ADDR(val) bfin_write32(MDMA1_S0_CURR_ADDR,val) +#define bfin_read_MDMA1_S0_CURR_X_COUNT() bfin_read16(MDMA1_S0_CURR_X_COUNT) +#define bfin_write_MDMA1_S0_CURR_X_COUNT(val) bfin_write16(MDMA1_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA1_S0_CURR_Y_COUNT() bfin_read16(MDMA1_S0_CURR_Y_COUNT) +#define bfin_write_MDMA1_S0_CURR_Y_COUNT(val) bfin_write16(MDMA1_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_S0_IRQ_STATUS() bfin_read16(MDMA1_S0_IRQ_STATUS) +#define bfin_write_MDMA1_S0_IRQ_STATUS(val) bfin_write16(MDMA1_S0_IRQ_STATUS,val) +#define bfin_read_MDMA1_S0_PERIPHERAL_MAP() bfin_read16(MDMA1_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_D1_CONFIG() bfin_read16(MDMA1_D1_CONFIG) +#define bfin_write_MDMA1_D1_CONFIG(val) bfin_write16(MDMA1_D1_CONFIG,val) +#define bfin_read_MDMA1_D1_NEXT_DESC_PTR() bfin_read32(MDMA1_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_D1_START_ADDR() bfin_read32(MDMA1_D1_START_ADDR) +#define bfin_write_MDMA1_D1_START_ADDR(val) bfin_write32(MDMA1_D1_START_ADDR,val) +#define bfin_read_MDMA1_D1_X_COUNT() bfin_read16(MDMA1_D1_X_COUNT) +#define bfin_write_MDMA1_D1_X_COUNT(val) bfin_write16(MDMA1_D1_X_COUNT,val) +#define bfin_read_MDMA1_D1_Y_COUNT() bfin_read16(MDMA1_D1_Y_COUNT) +#define bfin_write_MDMA1_D1_Y_COUNT(val) bfin_write16(MDMA1_D1_Y_COUNT,val) +#define bfin_read_MDMA1_D1_X_MODIFY() bfin_read16(MDMA1_D1_X_MODIFY) +#define bfin_write_MDMA1_D1_X_MODIFY(val) bfin_write16(MDMA1_D1_X_MODIFY,val) +#define bfin_read_MDMA1_D1_Y_MODIFY() bfin_read16(MDMA1_D1_Y_MODIFY) +#define bfin_write_MDMA1_D1_Y_MODIFY(val) bfin_write16(MDMA1_D1_Y_MODIFY,val) +#define bfin_read_MDMA1_D1_CURR_DESC_PTR() bfin_read32(MDMA1_D1_CURR_DESC_PTR) +#define bfin_write_MDMA1_D1_CURR_DESC_PTR(val) bfin_write32(MDMA1_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_D1_CURR_ADDR() bfin_read32(MDMA1_D1_CURR_ADDR) +#define bfin_write_MDMA1_D1_CURR_ADDR(val) bfin_write32(MDMA1_D1_CURR_ADDR,val) +#define bfin_read_MDMA1_D1_CURR_X_COUNT() bfin_read16(MDMA1_D1_CURR_X_COUNT) +#define bfin_write_MDMA1_D1_CURR_X_COUNT(val) bfin_write16(MDMA1_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA1_D1_CURR_Y_COUNT() bfin_read16(MDMA1_D1_CURR_Y_COUNT) +#define bfin_write_MDMA1_D1_CURR_Y_COUNT(val) bfin_write16(MDMA1_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_D1_IRQ_STATUS() bfin_read16(MDMA1_D1_IRQ_STATUS) +#define bfin_write_MDMA1_D1_IRQ_STATUS(val) bfin_write16(MDMA1_D1_IRQ_STATUS,val) +#define bfin_read_MDMA1_D1_PERIPHERAL_MAP() bfin_read16(MDMA1_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D1_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_S1_CONFIG() bfin_read16(MDMA1_S1_CONFIG) +#define bfin_write_MDMA1_S1_CONFIG(val) bfin_write16(MDMA1_S1_CONFIG,val) +#define bfin_read_MDMA1_S1_NEXT_DESC_PTR() bfin_read32(MDMA1_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_S1_START_ADDR() bfin_read32(MDMA1_S1_START_ADDR) +#define bfin_write_MDMA1_S1_START_ADDR(val) bfin_write32(MDMA1_S1_START_ADDR,val) +#define bfin_read_MDMA1_S1_X_COUNT() bfin_read16(MDMA1_S1_X_COUNT) +#define bfin_write_MDMA1_S1_X_COUNT(val) bfin_write16(MDMA1_S1_X_COUNT,val) +#define bfin_read_MDMA1_S1_Y_COUNT() bfin_read16(MDMA1_S1_Y_COUNT) +#define bfin_write_MDMA1_S1_Y_COUNT(val) bfin_write16(MDMA1_S1_Y_COUNT,val) +#define bfin_read_MDMA1_S1_X_MODIFY() bfin_read16(MDMA1_S1_X_MODIFY) +#define bfin_write_MDMA1_S1_X_MODIFY(val) bfin_write16(MDMA1_S1_X_MODIFY,val) +#define bfin_read_MDMA1_S1_Y_MODIFY() bfin_read16(MDMA1_S1_Y_MODIFY) +#define bfin_write_MDMA1_S1_Y_MODIFY(val) bfin_write16(MDMA1_S1_Y_MODIFY,val) +#define bfin_read_MDMA1_S1_CURR_DESC_PTR() bfin_read32(MDMA1_S1_CURR_DESC_PTR) +#define bfin_write_MDMA1_S1_CURR_DESC_PTR(val) bfin_write32(MDMA1_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_S1_CURR_ADDR() bfin_read32(MDMA1_S1_CURR_ADDR) +#define bfin_write_MDMA1_S1_CURR_ADDR(val) bfin_write32(MDMA1_S1_CURR_ADDR,val) +#define bfin_read_MDMA1_S1_CURR_X_COUNT() bfin_read16(MDMA1_S1_CURR_X_COUNT) +#define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT) +#define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_S1_IRQ_STATUS() bfin_read16(MDMA1_S1_IRQ_STATUS) +#define bfin_write_MDMA1_S1_IRQ_STATUS(val) bfin_write16(MDMA1_S1_IRQ_STATUS,val) +#define bfin_read_MDMA1_S1_PERIPHERAL_MAP() bfin_read16(MDMA1_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S1_PERIPHERAL_MAP,val) +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define bfin_read_DMA2_0_CONFIG() bfin_read16(DMA2_0_CONFIG) +#define bfin_write_DMA2_0_CONFIG(val) bfin_write16(DMA2_0_CONFIG,val) +#define bfin_read_DMA2_0_NEXT_DESC_PTR() bfin_read32(DMA2_0_NEXT_DESC_PTR) +#define bfin_write_DMA2_0_NEXT_DESC_PTR(val) bfin_write32(DMA2_0_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_0_START_ADDR() bfin_read32(DMA2_0_START_ADDR) +#define bfin_write_DMA2_0_START_ADDR(val) bfin_write32(DMA2_0_START_ADDR,val) +#define bfin_read_DMA2_0_X_COUNT() bfin_read16(DMA2_0_X_COUNT) +#define bfin_write_DMA2_0_X_COUNT(val) bfin_write16(DMA2_0_X_COUNT,val) +#define bfin_read_DMA2_0_Y_COUNT() bfin_read16(DMA2_0_Y_COUNT) +#define bfin_write_DMA2_0_Y_COUNT(val) bfin_write16(DMA2_0_Y_COUNT,val) +#define bfin_read_DMA2_0_X_MODIFY() bfin_read16(DMA2_0_X_MODIFY) +#define bfin_write_DMA2_0_X_MODIFY(val) bfin_write16(DMA2_0_X_MODIFY,val) +#define bfin_read_DMA2_0_Y_MODIFY() bfin_read16(DMA2_0_Y_MODIFY) +#define bfin_write_DMA2_0_Y_MODIFY(val) bfin_write16(DMA2_0_Y_MODIFY,val) +#define bfin_read_DMA2_0_CURR_DESC_PTR() bfin_read32(DMA2_0_CURR_DESC_PTR) +#define bfin_write_DMA2_0_CURR_DESC_PTR(val) bfin_write32(DMA2_0_CURR_DESC_PTR,val) +#define bfin_read_DMA2_0_CURR_ADDR() bfin_read32(DMA2_0_CURR_ADDR) +#define bfin_write_DMA2_0_CURR_ADDR(val) bfin_write32(DMA2_0_CURR_ADDR,val) +#define bfin_read_DMA2_0_CURR_X_COUNT() bfin_read16(DMA2_0_CURR_X_COUNT) +#define bfin_write_DMA2_0_CURR_X_COUNT(val) bfin_write16(DMA2_0_CURR_X_COUNT,val) +#define bfin_read_DMA2_0_CURR_Y_COUNT() bfin_read16(DMA2_0_CURR_Y_COUNT) +#define bfin_write_DMA2_0_CURR_Y_COUNT(val) bfin_write16(DMA2_0_CURR_Y_COUNT,val) +#define bfin_read_DMA2_0_IRQ_STATUS() bfin_read16(DMA2_0_IRQ_STATUS) +#define bfin_write_DMA2_0_IRQ_STATUS(val) bfin_write16(DMA2_0_IRQ_STATUS,val) +#define bfin_read_DMA2_0_PERIPHERAL_MAP() bfin_read16(DMA2_0_PERIPHERAL_MAP) +#define bfin_write_DMA2_0_PERIPHERAL_MAP(val) bfin_write16(DMA2_0_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_1_CONFIG() bfin_read16(DMA2_1_CONFIG) +#define bfin_write_DMA2_1_CONFIG(val) bfin_write16(DMA2_1_CONFIG,val) +#define bfin_read_DMA2_1_NEXT_DESC_PTR() bfin_read32(DMA2_1_NEXT_DESC_PTR) +#define bfin_write_DMA2_1_NEXT_DESC_PTR(val) bfin_write32(DMA2_1_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_1_START_ADDR() bfin_read32(DMA2_1_START_ADDR) +#define bfin_write_DMA2_1_START_ADDR(val) bfin_write32(DMA2_1_START_ADDR,val) +#define bfin_read_DMA2_1_X_COUNT() bfin_read16(DMA2_1_X_COUNT) +#define bfin_write_DMA2_1_X_COUNT(val) bfin_write16(DMA2_1_X_COUNT,val) +#define bfin_read_DMA2_1_Y_COUNT() bfin_read16(DMA2_1_Y_COUNT) +#define bfin_write_DMA2_1_Y_COUNT(val) bfin_write16(DMA2_1_Y_COUNT,val) +#define bfin_read_DMA2_1_X_MODIFY() bfin_read16(DMA2_1_X_MODIFY) +#define bfin_write_DMA2_1_X_MODIFY(val) bfin_write16(DMA2_1_X_MODIFY,val) +#define bfin_read_DMA2_1_Y_MODIFY() bfin_read16(DMA2_1_Y_MODIFY) +#define bfin_write_DMA2_1_Y_MODIFY(val) bfin_write16(DMA2_1_Y_MODIFY,val) +#define bfin_read_DMA2_1_CURR_DESC_PTR() bfin_read32(DMA2_1_CURR_DESC_PTR) +#define bfin_write_DMA2_1_CURR_DESC_PTR(val) bfin_write32(DMA2_1_CURR_DESC_PTR,val) +#define bfin_read_DMA2_1_CURR_ADDR() bfin_read32(DMA2_1_CURR_ADDR) +#define bfin_write_DMA2_1_CURR_ADDR(val) bfin_write32(DMA2_1_CURR_ADDR,val) +#define bfin_read_DMA2_1_CURR_X_COUNT() bfin_read16(DMA2_1_CURR_X_COUNT) +#define bfin_write_DMA2_1_CURR_X_COUNT(val) bfin_write16(DMA2_1_CURR_X_COUNT,val) +#define bfin_read_DMA2_1_CURR_Y_COUNT() bfin_read16(DMA2_1_CURR_Y_COUNT) +#define bfin_write_DMA2_1_CURR_Y_COUNT(val) bfin_write16(DMA2_1_CURR_Y_COUNT,val) +#define bfin_read_DMA2_1_IRQ_STATUS() bfin_read16(DMA2_1_IRQ_STATUS) +#define bfin_write_DMA2_1_IRQ_STATUS(val) bfin_write16(DMA2_1_IRQ_STATUS,val) +#define bfin_read_DMA2_1_PERIPHERAL_MAP() bfin_read16(DMA2_1_PERIPHERAL_MAP) +#define bfin_write_DMA2_1_PERIPHERAL_MAP(val) bfin_write16(DMA2_1_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_2_CONFIG() bfin_read16(DMA2_2_CONFIG) +#define bfin_write_DMA2_2_CONFIG(val) bfin_write16(DMA2_2_CONFIG,val) +#define bfin_read_DMA2_2_NEXT_DESC_PTR() bfin_read32(DMA2_2_NEXT_DESC_PTR) +#define bfin_write_DMA2_2_NEXT_DESC_PTR(val) bfin_write32(DMA2_2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_2_START_ADDR() bfin_read32(DMA2_2_START_ADDR) +#define bfin_write_DMA2_2_START_ADDR(val) bfin_write32(DMA2_2_START_ADDR,val) +#define bfin_read_DMA2_2_X_COUNT() bfin_read16(DMA2_2_X_COUNT) +#define bfin_write_DMA2_2_X_COUNT(val) bfin_write16(DMA2_2_X_COUNT,val) +#define bfin_read_DMA2_2_Y_COUNT() bfin_read16(DMA2_2_Y_COUNT) +#define bfin_write_DMA2_2_Y_COUNT(val) bfin_write16(DMA2_2_Y_COUNT,val) +#define bfin_read_DMA2_2_X_MODIFY() bfin_read16(DMA2_2_X_MODIFY) +#define bfin_write_DMA2_2_X_MODIFY(val) bfin_write16(DMA2_2_X_MODIFY,val) +#define bfin_read_DMA2_2_Y_MODIFY() bfin_read16(DMA2_2_Y_MODIFY) +#define bfin_write_DMA2_2_Y_MODIFY(val) bfin_write16(DMA2_2_Y_MODIFY,val) +#define bfin_read_DMA2_2_CURR_DESC_PTR() bfin_read32(DMA2_2_CURR_DESC_PTR) +#define bfin_write_DMA2_2_CURR_DESC_PTR(val) bfin_write32(DMA2_2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_2_CURR_ADDR() bfin_read32(DMA2_2_CURR_ADDR) +#define bfin_write_DMA2_2_CURR_ADDR(val) bfin_write32(DMA2_2_CURR_ADDR,val) +#define bfin_read_DMA2_2_CURR_X_COUNT() bfin_read16(DMA2_2_CURR_X_COUNT) +#define bfin_write_DMA2_2_CURR_X_COUNT(val) bfin_write16(DMA2_2_CURR_X_COUNT,val) +#define bfin_read_DMA2_2_CURR_Y_COUNT() bfin_read16(DMA2_2_CURR_Y_COUNT) +#define bfin_write_DMA2_2_CURR_Y_COUNT(val) bfin_write16(DMA2_2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_2_IRQ_STATUS() bfin_read16(DMA2_2_IRQ_STATUS) +#define bfin_write_DMA2_2_IRQ_STATUS(val) bfin_write16(DMA2_2_IRQ_STATUS,val) +#define bfin_read_DMA2_2_PERIPHERAL_MAP() bfin_read16(DMA2_2_PERIPHERAL_MAP) +#define bfin_write_DMA2_2_PERIPHERAL_MAP(val) bfin_write16(DMA2_2_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_3_CONFIG() bfin_read16(DMA2_3_CONFIG) +#define bfin_write_DMA2_3_CONFIG(val) bfin_write16(DMA2_3_CONFIG,val) +#define bfin_read_DMA2_3_NEXT_DESC_PTR() bfin_read32(DMA2_3_NEXT_DESC_PTR) +#define bfin_write_DMA2_3_NEXT_DESC_PTR(val) bfin_write32(DMA2_3_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_3_START_ADDR() bfin_read32(DMA2_3_START_ADDR) +#define bfin_write_DMA2_3_START_ADDR(val) bfin_write32(DMA2_3_START_ADDR,val) +#define bfin_read_DMA2_3_X_COUNT() bfin_read16(DMA2_3_X_COUNT) +#define bfin_write_DMA2_3_X_COUNT(val) bfin_write16(DMA2_3_X_COUNT,val) +#define bfin_read_DMA2_3_Y_COUNT() bfin_read16(DMA2_3_Y_COUNT) +#define bfin_write_DMA2_3_Y_COUNT(val) bfin_write16(DMA2_3_Y_COUNT,val) +#define bfin_read_DMA2_3_X_MODIFY() bfin_read16(DMA2_3_X_MODIFY) +#define bfin_write_DMA2_3_X_MODIFY(val) bfin_write16(DMA2_3_X_MODIFY,val) +#define bfin_read_DMA2_3_Y_MODIFY() bfin_read16(DMA2_3_Y_MODIFY) +#define bfin_write_DMA2_3_Y_MODIFY(val) bfin_write16(DMA2_3_Y_MODIFY,val) +#define bfin_read_DMA2_3_CURR_DESC_PTR() bfin_read32(DMA2_3_CURR_DESC_PTR) +#define bfin_write_DMA2_3_CURR_DESC_PTR(val) bfin_write32(DMA2_3_CURR_DESC_PTR,val) +#define bfin_read_DMA2_3_CURR_ADDR() bfin_read32(DMA2_3_CURR_ADDR) +#define bfin_write_DMA2_3_CURR_ADDR(val) bfin_write32(DMA2_3_CURR_ADDR,val) +#define bfin_read_DMA2_3_CURR_X_COUNT() bfin_read16(DMA2_3_CURR_X_COUNT) +#define bfin_write_DMA2_3_CURR_X_COUNT(val) bfin_write16(DMA2_3_CURR_X_COUNT,val) +#define bfin_read_DMA2_3_CURR_Y_COUNT() bfin_read16(DMA2_3_CURR_Y_COUNT) +#define bfin_write_DMA2_3_CURR_Y_COUNT(val) bfin_write16(DMA2_3_CURR_Y_COUNT,val) +#define bfin_read_DMA2_3_IRQ_STATUS() bfin_read16(DMA2_3_IRQ_STATUS) +#define bfin_write_DMA2_3_IRQ_STATUS(val) bfin_write16(DMA2_3_IRQ_STATUS,val) +#define bfin_read_DMA2_3_PERIPHERAL_MAP() bfin_read16(DMA2_3_PERIPHERAL_MAP) +#define bfin_write_DMA2_3_PERIPHERAL_MAP(val) bfin_write16(DMA2_3_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_4_CONFIG() bfin_read16(DMA2_4_CONFIG) +#define bfin_write_DMA2_4_CONFIG(val) bfin_write16(DMA2_4_CONFIG,val) +#define bfin_read_DMA2_4_NEXT_DESC_PTR() bfin_read32(DMA2_4_NEXT_DESC_PTR) +#define bfin_write_DMA2_4_NEXT_DESC_PTR(val) bfin_write32(DMA2_4_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_4_START_ADDR() bfin_read32(DMA2_4_START_ADDR) +#define bfin_write_DMA2_4_START_ADDR(val) bfin_write32(DMA2_4_START_ADDR,val) +#define bfin_read_DMA2_4_X_COUNT() bfin_read16(DMA2_4_X_COUNT) +#define bfin_write_DMA2_4_X_COUNT(val) bfin_write16(DMA2_4_X_COUNT,val) +#define bfin_read_DMA2_4_Y_COUNT() bfin_read16(DMA2_4_Y_COUNT) +#define bfin_write_DMA2_4_Y_COUNT(val) bfin_write16(DMA2_4_Y_COUNT,val) +#define bfin_read_DMA2_4_X_MODIFY() bfin_read16(DMA2_4_X_MODIFY) +#define bfin_write_DMA2_4_X_MODIFY(val) bfin_write16(DMA2_4_X_MODIFY,val) +#define bfin_read_DMA2_4_Y_MODIFY() bfin_read16(DMA2_4_Y_MODIFY) +#define bfin_write_DMA2_4_Y_MODIFY(val) bfin_write16(DMA2_4_Y_MODIFY,val) +#define bfin_read_DMA2_4_CURR_DESC_PTR() bfin_read32(DMA2_4_CURR_DESC_PTR) +#define bfin_write_DMA2_4_CURR_DESC_PTR(val) bfin_write32(DMA2_4_CURR_DESC_PTR,val) +#define bfin_read_DMA2_4_CURR_ADDR() bfin_read32(DMA2_4_CURR_ADDR) +#define bfin_write_DMA2_4_CURR_ADDR(val) bfin_write32(DMA2_4_CURR_ADDR,val) +#define bfin_read_DMA2_4_CURR_X_COUNT() bfin_read16(DMA2_4_CURR_X_COUNT) +#define bfin_write_DMA2_4_CURR_X_COUNT(val) bfin_write16(DMA2_4_CURR_X_COUNT,val) +#define bfin_read_DMA2_4_CURR_Y_COUNT() bfin_read16(DMA2_4_CURR_Y_COUNT) +#define bfin_write_DMA2_4_CURR_Y_COUNT(val) bfin_write16(DMA2_4_CURR_Y_COUNT,val) +#define bfin_read_DMA2_4_IRQ_STATUS() bfin_read16(DMA2_4_IRQ_STATUS) +#define bfin_write_DMA2_4_IRQ_STATUS(val) bfin_write16(DMA2_4_IRQ_STATUS,val) +#define bfin_read_DMA2_4_PERIPHERAL_MAP() bfin_read16(DMA2_4_PERIPHERAL_MAP) +#define bfin_write_DMA2_4_PERIPHERAL_MAP(val) bfin_write16(DMA2_4_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_5_CONFIG() bfin_read16(DMA2_5_CONFIG) +#define bfin_write_DMA2_5_CONFIG(val) bfin_write16(DMA2_5_CONFIG,val) +#define bfin_read_DMA2_5_NEXT_DESC_PTR() bfin_read32(DMA2_5_NEXT_DESC_PTR) +#define bfin_write_DMA2_5_NEXT_DESC_PTR(val) bfin_write32(DMA2_5_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_5_START_ADDR() bfin_read32(DMA2_5_START_ADDR) +#define bfin_write_DMA2_5_START_ADDR(val) bfin_write32(DMA2_5_START_ADDR,val) +#define bfin_read_DMA2_5_X_COUNT() bfin_read16(DMA2_5_X_COUNT) +#define bfin_write_DMA2_5_X_COUNT(val) bfin_write16(DMA2_5_X_COUNT,val) +#define bfin_read_DMA2_5_Y_COUNT() bfin_read16(DMA2_5_Y_COUNT) +#define bfin_write_DMA2_5_Y_COUNT(val) bfin_write16(DMA2_5_Y_COUNT,val) +#define bfin_read_DMA2_5_X_MODIFY() bfin_read16(DMA2_5_X_MODIFY) +#define bfin_write_DMA2_5_X_MODIFY(val) bfin_write16(DMA2_5_X_MODIFY,val) +#define bfin_read_DMA2_5_Y_MODIFY() bfin_read16(DMA2_5_Y_MODIFY) +#define bfin_write_DMA2_5_Y_MODIFY(val) bfin_write16(DMA2_5_Y_MODIFY,val) +#define bfin_read_DMA2_5_CURR_DESC_PTR() bfin_read32(DMA2_5_CURR_DESC_PTR) +#define bfin_write_DMA2_5_CURR_DESC_PTR(val) bfin_write32(DMA2_5_CURR_DESC_PTR,val) +#define bfin_read_DMA2_5_CURR_ADDR() bfin_read32(DMA2_5_CURR_ADDR) +#define bfin_write_DMA2_5_CURR_ADDR(val) bfin_write32(DMA2_5_CURR_ADDR,val) +#define bfin_read_DMA2_5_CURR_X_COUNT() bfin_read16(DMA2_5_CURR_X_COUNT) +#define bfin_write_DMA2_5_CURR_X_COUNT(val) bfin_write16(DMA2_5_CURR_X_COUNT,val) +#define bfin_read_DMA2_5_CURR_Y_COUNT() bfin_read16(DMA2_5_CURR_Y_COUNT) +#define bfin_write_DMA2_5_CURR_Y_COUNT(val) bfin_write16(DMA2_5_CURR_Y_COUNT,val) +#define bfin_read_DMA2_5_IRQ_STATUS() bfin_read16(DMA2_5_IRQ_STATUS) +#define bfin_write_DMA2_5_IRQ_STATUS(val) bfin_write16(DMA2_5_IRQ_STATUS,val) +#define bfin_read_DMA2_5_PERIPHERAL_MAP() bfin_read16(DMA2_5_PERIPHERAL_MAP) +#define bfin_write_DMA2_5_PERIPHERAL_MAP(val) bfin_write16(DMA2_5_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_6_CONFIG() bfin_read16(DMA2_6_CONFIG) +#define bfin_write_DMA2_6_CONFIG(val) bfin_write16(DMA2_6_CONFIG,val) +#define bfin_read_DMA2_6_NEXT_DESC_PTR() bfin_read32(DMA2_6_NEXT_DESC_PTR) +#define bfin_write_DMA2_6_NEXT_DESC_PTR(val) bfin_write32(DMA2_6_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_6_START_ADDR() bfin_read32(DMA2_6_START_ADDR) +#define bfin_write_DMA2_6_START_ADDR(val) bfin_write32(DMA2_6_START_ADDR,val) +#define bfin_read_DMA2_6_X_COUNT() bfin_read16(DMA2_6_X_COUNT) +#define bfin_write_DMA2_6_X_COUNT(val) bfin_write16(DMA2_6_X_COUNT,val) +#define bfin_read_DMA2_6_Y_COUNT() bfin_read16(DMA2_6_Y_COUNT) +#define bfin_write_DMA2_6_Y_COUNT(val) bfin_write16(DMA2_6_Y_COUNT,val) +#define bfin_read_DMA2_6_X_MODIFY() bfin_read16(DMA2_6_X_MODIFY) +#define bfin_write_DMA2_6_X_MODIFY(val) bfin_write16(DMA2_6_X_MODIFY,val) +#define bfin_read_DMA2_6_Y_MODIFY() bfin_read16(DMA2_6_Y_MODIFY) +#define bfin_write_DMA2_6_Y_MODIFY(val) bfin_write16(DMA2_6_Y_MODIFY,val) +#define bfin_read_DMA2_6_CURR_DESC_PTR() bfin_read32(DMA2_6_CURR_DESC_PTR) +#define bfin_write_DMA2_6_CURR_DESC_PTR(val) bfin_write32(DMA2_6_CURR_DESC_PTR,val) +#define bfin_read_DMA2_6_CURR_ADDR() bfin_read32(DMA2_6_CURR_ADDR) +#define bfin_write_DMA2_6_CURR_ADDR(val) bfin_write32(DMA2_6_CURR_ADDR,val) +#define bfin_read_DMA2_6_CURR_X_COUNT() bfin_read16(DMA2_6_CURR_X_COUNT) +#define bfin_write_DMA2_6_CURR_X_COUNT(val) bfin_write16(DMA2_6_CURR_X_COUNT,val) +#define bfin_read_DMA2_6_CURR_Y_COUNT() bfin_read16(DMA2_6_CURR_Y_COUNT) +#define bfin_write_DMA2_6_CURR_Y_COUNT(val) bfin_write16(DMA2_6_CURR_Y_COUNT,val) +#define bfin_read_DMA2_6_IRQ_STATUS() bfin_read16(DMA2_6_IRQ_STATUS) +#define bfin_write_DMA2_6_IRQ_STATUS(val) bfin_write16(DMA2_6_IRQ_STATUS,val) +#define bfin_read_DMA2_6_PERIPHERAL_MAP() bfin_read16(DMA2_6_PERIPHERAL_MAP) +#define bfin_write_DMA2_6_PERIPHERAL_MAP(val) bfin_write16(DMA2_6_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_7_CONFIG() bfin_read16(DMA2_7_CONFIG) +#define bfin_write_DMA2_7_CONFIG(val) bfin_write16(DMA2_7_CONFIG,val) +#define bfin_read_DMA2_7_NEXT_DESC_PTR() bfin_read32(DMA2_7_NEXT_DESC_PTR) +#define bfin_write_DMA2_7_NEXT_DESC_PTR(val) bfin_write32(DMA2_7_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_7_START_ADDR() bfin_read32(DMA2_7_START_ADDR) +#define bfin_write_DMA2_7_START_ADDR(val) bfin_write32(DMA2_7_START_ADDR,val) +#define bfin_read_DMA2_7_X_COUNT() bfin_read16(DMA2_7_X_COUNT) +#define bfin_write_DMA2_7_X_COUNT(val) bfin_write16(DMA2_7_X_COUNT,val) +#define bfin_read_DMA2_7_Y_COUNT() bfin_read16(DMA2_7_Y_COUNT) +#define bfin_write_DMA2_7_Y_COUNT(val) bfin_write16(DMA2_7_Y_COUNT,val) +#define bfin_read_DMA2_7_X_MODIFY() bfin_read16(DMA2_7_X_MODIFY) +#define bfin_write_DMA2_7_X_MODIFY(val) bfin_write16(DMA2_7_X_MODIFY,val) +#define bfin_read_DMA2_7_Y_MODIFY() bfin_read16(DMA2_7_Y_MODIFY) +#define bfin_write_DMA2_7_Y_MODIFY(val) bfin_write16(DMA2_7_Y_MODIFY,val) +#define bfin_read_DMA2_7_CURR_DESC_PTR() bfin_read32(DMA2_7_CURR_DESC_PTR) +#define bfin_write_DMA2_7_CURR_DESC_PTR(val) bfin_write32(DMA2_7_CURR_DESC_PTR,val) +#define bfin_read_DMA2_7_CURR_ADDR() bfin_read32(DMA2_7_CURR_ADDR) +#define bfin_write_DMA2_7_CURR_ADDR(val) bfin_write32(DMA2_7_CURR_ADDR,val) +#define bfin_read_DMA2_7_CURR_X_COUNT() bfin_read16(DMA2_7_CURR_X_COUNT) +#define bfin_write_DMA2_7_CURR_X_COUNT(val) bfin_write16(DMA2_7_CURR_X_COUNT,val) +#define bfin_read_DMA2_7_CURR_Y_COUNT() bfin_read16(DMA2_7_CURR_Y_COUNT) +#define bfin_write_DMA2_7_CURR_Y_COUNT(val) bfin_write16(DMA2_7_CURR_Y_COUNT,val) +#define bfin_read_DMA2_7_IRQ_STATUS() bfin_read16(DMA2_7_IRQ_STATUS) +#define bfin_write_DMA2_7_IRQ_STATUS(val) bfin_write16(DMA2_7_IRQ_STATUS,val) +#define bfin_read_DMA2_7_PERIPHERAL_MAP() bfin_read16(DMA2_7_PERIPHERAL_MAP) +#define bfin_write_DMA2_7_PERIPHERAL_MAP(val) bfin_write16(DMA2_7_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_8_CONFIG() bfin_read16(DMA2_8_CONFIG) +#define bfin_write_DMA2_8_CONFIG(val) bfin_write16(DMA2_8_CONFIG,val) +#define bfin_read_DMA2_8_NEXT_DESC_PTR() bfin_read32(DMA2_8_NEXT_DESC_PTR) +#define bfin_write_DMA2_8_NEXT_DESC_PTR(val) bfin_write32(DMA2_8_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_8_START_ADDR() bfin_read32(DMA2_8_START_ADDR) +#define bfin_write_DMA2_8_START_ADDR(val) bfin_write32(DMA2_8_START_ADDR,val) +#define bfin_read_DMA2_8_X_COUNT() bfin_read16(DMA2_8_X_COUNT) +#define bfin_write_DMA2_8_X_COUNT(val) bfin_write16(DMA2_8_X_COUNT,val) +#define bfin_read_DMA2_8_Y_COUNT() bfin_read16(DMA2_8_Y_COUNT) +#define bfin_write_DMA2_8_Y_COUNT(val) bfin_write16(DMA2_8_Y_COUNT,val) +#define bfin_read_DMA2_8_X_MODIFY() bfin_read16(DMA2_8_X_MODIFY) +#define bfin_write_DMA2_8_X_MODIFY(val) bfin_write16(DMA2_8_X_MODIFY,val) +#define bfin_read_DMA2_8_Y_MODIFY() bfin_read16(DMA2_8_Y_MODIFY) +#define bfin_write_DMA2_8_Y_MODIFY(val) bfin_write16(DMA2_8_Y_MODIFY,val) +#define bfin_read_DMA2_8_CURR_DESC_PTR() bfin_read32(DMA2_8_CURR_DESC_PTR) +#define bfin_write_DMA2_8_CURR_DESC_PTR(val) bfin_write32(DMA2_8_CURR_DESC_PTR,val) +#define bfin_read_DMA2_8_CURR_ADDR() bfin_read32(DMA2_8_CURR_ADDR) +#define bfin_write_DMA2_8_CURR_ADDR(val) bfin_write32(DMA2_8_CURR_ADDR,val) +#define bfin_read_DMA2_8_CURR_X_COUNT() bfin_read16(DMA2_8_CURR_X_COUNT) +#define bfin_write_DMA2_8_CURR_X_COUNT(val) bfin_write16(DMA2_8_CURR_X_COUNT,val) +#define bfin_read_DMA2_8_CURR_Y_COUNT() bfin_read16(DMA2_8_CURR_Y_COUNT) +#define bfin_write_DMA2_8_CURR_Y_COUNT(val) bfin_write16(DMA2_8_CURR_Y_COUNT,val) +#define bfin_read_DMA2_8_IRQ_STATUS() bfin_read16(DMA2_8_IRQ_STATUS) +#define bfin_write_DMA2_8_IRQ_STATUS(val) bfin_write16(DMA2_8_IRQ_STATUS,val) +#define bfin_read_DMA2_8_PERIPHERAL_MAP() bfin_read16(DMA2_8_PERIPHERAL_MAP) +#define bfin_write_DMA2_8_PERIPHERAL_MAP(val) bfin_write16(DMA2_8_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_9_CONFIG() bfin_read16(DMA2_9_CONFIG) +#define bfin_write_DMA2_9_CONFIG(val) bfin_write16(DMA2_9_CONFIG,val) +#define bfin_read_DMA2_9_NEXT_DESC_PTR() bfin_read32(DMA2_9_NEXT_DESC_PTR) +#define bfin_write_DMA2_9_NEXT_DESC_PTR(val) bfin_write32(DMA2_9_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_9_START_ADDR() bfin_read32(DMA2_9_START_ADDR) +#define bfin_write_DMA2_9_START_ADDR(val) bfin_write32(DMA2_9_START_ADDR,val) +#define bfin_read_DMA2_9_X_COUNT() bfin_read16(DMA2_9_X_COUNT) +#define bfin_write_DMA2_9_X_COUNT(val) bfin_write16(DMA2_9_X_COUNT,val) +#define bfin_read_DMA2_9_Y_COUNT() bfin_read16(DMA2_9_Y_COUNT) +#define bfin_write_DMA2_9_Y_COUNT(val) bfin_write16(DMA2_9_Y_COUNT,val) +#define bfin_read_DMA2_9_X_MODIFY() bfin_read16(DMA2_9_X_MODIFY) +#define bfin_write_DMA2_9_X_MODIFY(val) bfin_write16(DMA2_9_X_MODIFY,val) +#define bfin_read_DMA2_9_Y_MODIFY() bfin_read16(DMA2_9_Y_MODIFY) +#define bfin_write_DMA2_9_Y_MODIFY(val) bfin_write16(DMA2_9_Y_MODIFY,val) +#define bfin_read_DMA2_9_CURR_DESC_PTR() bfin_read32(DMA2_9_CURR_DESC_PTR) +#define bfin_write_DMA2_9_CURR_DESC_PTR(val) bfin_write32(DMA2_9_CURR_DESC_PTR,val) +#define bfin_read_DMA2_9_CURR_ADDR() bfin_read32(DMA2_9_CURR_ADDR) +#define bfin_write_DMA2_9_CURR_ADDR(val) bfin_write32(DMA2_9_CURR_ADDR,val) +#define bfin_read_DMA2_9_CURR_X_COUNT() bfin_read16(DMA2_9_CURR_X_COUNT) +#define bfin_write_DMA2_9_CURR_X_COUNT(val) bfin_write16(DMA2_9_CURR_X_COUNT,val) +#define bfin_read_DMA2_9_CURR_Y_COUNT() bfin_read16(DMA2_9_CURR_Y_COUNT) +#define bfin_write_DMA2_9_CURR_Y_COUNT(val) bfin_write16(DMA2_9_CURR_Y_COUNT,val) +#define bfin_read_DMA2_9_IRQ_STATUS() bfin_read16(DMA2_9_IRQ_STATUS) +#define bfin_write_DMA2_9_IRQ_STATUS(val) bfin_write16(DMA2_9_IRQ_STATUS,val) +#define bfin_read_DMA2_9_PERIPHERAL_MAP() bfin_read16(DMA2_9_PERIPHERAL_MAP) +#define bfin_write_DMA2_9_PERIPHERAL_MAP(val) bfin_write16(DMA2_9_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_10_CONFIG() bfin_read16(DMA2_10_CONFIG) +#define bfin_write_DMA2_10_CONFIG(val) bfin_write16(DMA2_10_CONFIG,val) +#define bfin_read_DMA2_10_NEXT_DESC_PTR() bfin_read32(DMA2_10_NEXT_DESC_PTR) +#define bfin_write_DMA2_10_NEXT_DESC_PTR(val) bfin_write32(DMA2_10_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_10_START_ADDR() bfin_read32(DMA2_10_START_ADDR) +#define bfin_write_DMA2_10_START_ADDR(val) bfin_write32(DMA2_10_START_ADDR,val) +#define bfin_read_DMA2_10_X_COUNT() bfin_read16(DMA2_10_X_COUNT) +#define bfin_write_DMA2_10_X_COUNT(val) bfin_write16(DMA2_10_X_COUNT,val) +#define bfin_read_DMA2_10_Y_COUNT() bfin_read16(DMA2_10_Y_COUNT) +#define bfin_write_DMA2_10_Y_COUNT(val) bfin_write16(DMA2_10_Y_COUNT,val) +#define bfin_read_DMA2_10_X_MODIFY() bfin_read16(DMA2_10_X_MODIFY) +#define bfin_write_DMA2_10_X_MODIFY(val) bfin_write16(DMA2_10_X_MODIFY,val) +#define bfin_read_DMA2_10_Y_MODIFY() bfin_read16(DMA2_10_Y_MODIFY) +#define bfin_write_DMA2_10_Y_MODIFY(val) bfin_write16(DMA2_10_Y_MODIFY,val) +#define bfin_read_DMA2_10_CURR_DESC_PTR() bfin_read32(DMA2_10_CURR_DESC_PTR) +#define bfin_write_DMA2_10_CURR_DESC_PTR(val) bfin_write32(DMA2_10_CURR_DESC_PTR,val) +#define bfin_read_DMA2_10_CURR_ADDR() bfin_read32(DMA2_10_CURR_ADDR) +#define bfin_write_DMA2_10_CURR_ADDR(val) bfin_write32(DMA2_10_CURR_ADDR,val) +#define bfin_read_DMA2_10_CURR_X_COUNT() bfin_read16(DMA2_10_CURR_X_COUNT) +#define bfin_write_DMA2_10_CURR_X_COUNT(val) bfin_write16(DMA2_10_CURR_X_COUNT,val) +#define bfin_read_DMA2_10_CURR_Y_COUNT() bfin_read16(DMA2_10_CURR_Y_COUNT) +#define bfin_write_DMA2_10_CURR_Y_COUNT(val) bfin_write16(DMA2_10_CURR_Y_COUNT,val) +#define bfin_read_DMA2_10_IRQ_STATUS() bfin_read16(DMA2_10_IRQ_STATUS) +#define bfin_write_DMA2_10_IRQ_STATUS(val) bfin_write16(DMA2_10_IRQ_STATUS,val) +#define bfin_read_DMA2_10_PERIPHERAL_MAP() bfin_read16(DMA2_10_PERIPHERAL_MAP) +#define bfin_write_DMA2_10_PERIPHERAL_MAP(val) bfin_write16(DMA2_10_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_11_CONFIG() bfin_read16(DMA2_11_CONFIG) +#define bfin_write_DMA2_11_CONFIG(val) bfin_write16(DMA2_11_CONFIG,val) +#define bfin_read_DMA2_11_NEXT_DESC_PTR() bfin_read32(DMA2_11_NEXT_DESC_PTR) +#define bfin_write_DMA2_11_NEXT_DESC_PTR(val) bfin_write32(DMA2_11_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_11_START_ADDR() bfin_read32(DMA2_11_START_ADDR) +#define bfin_write_DMA2_11_START_ADDR(val) bfin_write32(DMA2_11_START_ADDR,val) +#define bfin_read_DMA2_11_X_COUNT() bfin_read16(DMA2_11_X_COUNT) +#define bfin_write_DMA2_11_X_COUNT(val) bfin_write16(DMA2_11_X_COUNT,val) +#define bfin_read_DMA2_11_Y_COUNT() bfin_read16(DMA2_11_Y_COUNT) +#define bfin_write_DMA2_11_Y_COUNT(val) bfin_write16(DMA2_11_Y_COUNT,val) +#define bfin_read_DMA2_11_X_MODIFY() bfin_read16(DMA2_11_X_MODIFY) +#define bfin_write_DMA2_11_X_MODIFY(val) bfin_write16(DMA2_11_X_MODIFY,val) +#define bfin_read_DMA2_11_Y_MODIFY() bfin_read16(DMA2_11_Y_MODIFY) +#define bfin_write_DMA2_11_Y_MODIFY(val) bfin_write16(DMA2_11_Y_MODIFY,val) +#define bfin_read_DMA2_11_CURR_DESC_PTR() bfin_read32(DMA2_11_CURR_DESC_PTR) +#define bfin_write_DMA2_11_CURR_DESC_PTR(val) bfin_write32(DMA2_11_CURR_DESC_PTR,val) +#define bfin_read_DMA2_11_CURR_ADDR() bfin_read32(DMA2_11_CURR_ADDR) +#define bfin_write_DMA2_11_CURR_ADDR(val) bfin_write32(DMA2_11_CURR_ADDR,val) +#define bfin_read_DMA2_11_CURR_X_COUNT() bfin_read16(DMA2_11_CURR_X_COUNT) +#define bfin_write_DMA2_11_CURR_X_COUNT(val) bfin_write16(DMA2_11_CURR_X_COUNT,val) +#define bfin_read_DMA2_11_CURR_Y_COUNT() bfin_read16(DMA2_11_CURR_Y_COUNT) +#define bfin_write_DMA2_11_CURR_Y_COUNT(val) bfin_write16(DMA2_11_CURR_Y_COUNT,val) +#define bfin_read_DMA2_11_IRQ_STATUS() bfin_read16(DMA2_11_IRQ_STATUS) +#define bfin_write_DMA2_11_IRQ_STATUS(val) bfin_write16(DMA2_11_IRQ_STATUS,val) +#define bfin_read_DMA2_11_PERIPHERAL_MAP() bfin_read16(DMA2_11_PERIPHERAL_MAP) +#define bfin_write_DMA2_11_PERIPHERAL_MAP(val) bfin_write16(DMA2_11_PERIPHERAL_MAP,val) +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define bfin_read_MDMA2_D0_CONFIG() bfin_read16(MDMA2_D0_CONFIG) +#define bfin_write_MDMA2_D0_CONFIG(val) bfin_write16(MDMA2_D0_CONFIG,val) +#define bfin_read_MDMA2_D0_NEXT_DESC_PTR() bfin_read32(MDMA2_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA2_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_D0_START_ADDR() bfin_read32(MDMA2_D0_START_ADDR) +#define bfin_write_MDMA2_D0_START_ADDR(val) bfin_write32(MDMA2_D0_START_ADDR,val) +#define bfin_read_MDMA2_D0_X_COUNT() bfin_read16(MDMA2_D0_X_COUNT) +#define bfin_write_MDMA2_D0_X_COUNT(val) bfin_write16(MDMA2_D0_X_COUNT,val) +#define bfin_read_MDMA2_D0_Y_COUNT() bfin_read16(MDMA2_D0_Y_COUNT) +#define bfin_write_MDMA2_D0_Y_COUNT(val) bfin_write16(MDMA2_D0_Y_COUNT,val) +#define bfin_read_MDMA2_D0_X_MODIFY() bfin_read16(MDMA2_D0_X_MODIFY) +#define bfin_write_MDMA2_D0_X_MODIFY(val) bfin_write16(MDMA2_D0_X_MODIFY,val) +#define bfin_read_MDMA2_D0_Y_MODIFY() bfin_read16(MDMA2_D0_Y_MODIFY) +#define bfin_write_MDMA2_D0_Y_MODIFY(val) bfin_write16(MDMA2_D0_Y_MODIFY,val) +#define bfin_read_MDMA2_D0_CURR_DESC_PTR() bfin_read32(MDMA2_D0_CURR_DESC_PTR) +#define bfin_write_MDMA2_D0_CURR_DESC_PTR(val) bfin_write32(MDMA2_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_D0_CURR_ADDR() bfin_read32(MDMA2_D0_CURR_ADDR) +#define bfin_write_MDMA2_D0_CURR_ADDR(val) bfin_write32(MDMA2_D0_CURR_ADDR,val) +#define bfin_read_MDMA2_D0_CURR_X_COUNT() bfin_read16(MDMA2_D0_CURR_X_COUNT) +#define bfin_write_MDMA2_D0_CURR_X_COUNT(val) bfin_write16(MDMA2_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA2_D0_CURR_Y_COUNT() bfin_read16(MDMA2_D0_CURR_Y_COUNT) +#define bfin_write_MDMA2_D0_CURR_Y_COUNT(val) bfin_write16(MDMA2_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_D0_IRQ_STATUS() bfin_read16(MDMA2_D0_IRQ_STATUS) +#define bfin_write_MDMA2_D0_IRQ_STATUS(val) bfin_write16(MDMA2_D0_IRQ_STATUS,val) +#define bfin_read_MDMA2_D0_PERIPHERAL_MAP() bfin_read16(MDMA2_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA2_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_S0_CONFIG() bfin_read16(MDMA2_S0_CONFIG) +#define bfin_write_MDMA2_S0_CONFIG(val) bfin_write16(MDMA2_S0_CONFIG,val) +#define bfin_read_MDMA2_S0_NEXT_DESC_PTR() bfin_read32(MDMA2_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA2_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_S0_START_ADDR() bfin_read32(MDMA2_S0_START_ADDR) +#define bfin_write_MDMA2_S0_START_ADDR(val) bfin_write32(MDMA2_S0_START_ADDR,val) +#define bfin_read_MDMA2_S0_X_COUNT() bfin_read16(MDMA2_S0_X_COUNT) +#define bfin_write_MDMA2_S0_X_COUNT(val) bfin_write16(MDMA2_S0_X_COUNT,val) +#define bfin_read_MDMA2_S0_Y_COUNT() bfin_read16(MDMA2_S0_Y_COUNT) +#define bfin_write_MDMA2_S0_Y_COUNT(val) bfin_write16(MDMA2_S0_Y_COUNT,val) +#define bfin_read_MDMA2_S0_X_MODIFY() bfin_read16(MDMA2_S0_X_MODIFY) +#define bfin_write_MDMA2_S0_X_MODIFY(val) bfin_write16(MDMA2_S0_X_MODIFY,val) +#define bfin_read_MDMA2_S0_Y_MODIFY() bfin_read16(MDMA2_S0_Y_MODIFY) +#define bfin_write_MDMA2_S0_Y_MODIFY(val) bfin_write16(MDMA2_S0_Y_MODIFY,val) +#define bfin_read_MDMA2_S0_CURR_DESC_PTR() bfin_read32(MDMA2_S0_CURR_DESC_PTR) +#define bfin_write_MDMA2_S0_CURR_DESC_PTR(val) bfin_write32(MDMA2_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_S0_CURR_ADDR() bfin_read32(MDMA2_S0_CURR_ADDR) +#define bfin_write_MDMA2_S0_CURR_ADDR(val) bfin_write32(MDMA2_S0_CURR_ADDR,val) +#define bfin_read_MDMA2_S0_CURR_X_COUNT() bfin_read16(MDMA2_S0_CURR_X_COUNT) +#define bfin_write_MDMA2_S0_CURR_X_COUNT(val) bfin_write16(MDMA2_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA2_S0_CURR_Y_COUNT() bfin_read16(MDMA2_S0_CURR_Y_COUNT) +#define bfin_write_MDMA2_S0_CURR_Y_COUNT(val) bfin_write16(MDMA2_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_S0_IRQ_STATUS() bfin_read16(MDMA2_S0_IRQ_STATUS) +#define bfin_write_MDMA2_S0_IRQ_STATUS(val) bfin_write16(MDMA2_S0_IRQ_STATUS,val) +#define bfin_read_MDMA2_S0_PERIPHERAL_MAP() bfin_read16(MDMA2_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA2_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_D1_CONFIG() bfin_read16(MDMA2_D1_CONFIG) +#define bfin_write_MDMA2_D1_CONFIG(val) bfin_write16(MDMA2_D1_CONFIG,val) +#define bfin_read_MDMA2_D1_NEXT_DESC_PTR() bfin_read32(MDMA2_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA2_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_D1_START_ADDR() bfin_read32(MDMA2_D1_START_ADDR) +#define bfin_write_MDMA2_D1_START_ADDR(val) bfin_write32(MDMA2_D1_START_ADDR,val) +#define bfin_read_MDMA2_D1_X_COUNT() bfin_read16(MDMA2_D1_X_COUNT) +#define bfin_write_MDMA2_D1_X_COUNT(val) bfin_write16(MDMA2_D1_X_COUNT,val) +#define bfin_read_MDMA2_D1_Y_COUNT() bfin_read16(MDMA2_D1_Y_COUNT) +#define bfin_write_MDMA2_D1_Y_COUNT(val) bfin_write16(MDMA2_D1_Y_COUNT,val) +#define bfin_read_MDMA2_D1_X_MODIFY() bfin_read16(MDMA2_D1_X_MODIFY) +#define bfin_write_MDMA2_D1_X_MODIFY(val) bfin_write16(MDMA2_D1_X_MODIFY,val) +#define bfin_read_MDMA2_D1_Y_MODIFY() bfin_read16(MDMA2_D1_Y_MODIFY) +#define bfin_write_MDMA2_D1_Y_MODIFY(val) bfin_write16(MDMA2_D1_Y_MODIFY,val) +#define bfin_read_MDMA2_D1_CURR_DESC_PTR() bfin_read32(MDMA2_D1_CURR_DESC_PTR) +#define bfin_write_MDMA2_D1_CURR_DESC_PTR(val) bfin_write32(MDMA2_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_D1_CURR_ADDR() bfin_read32(MDMA2_D1_CURR_ADDR) +#define bfin_write_MDMA2_D1_CURR_ADDR(val) bfin_write32(MDMA2_D1_CURR_ADDR,val) +#define bfin_read_MDMA2_D1_CURR_X_COUNT() bfin_read16(MDMA2_D1_CURR_X_COUNT) +#define bfin_write_MDMA2_D1_CURR_X_COUNT(val) bfin_write16(MDMA2_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA2_D1_CURR_Y_COUNT() bfin_read16(MDMA2_D1_CURR_Y_COUNT) +#define bfin_write_MDMA2_D1_CURR_Y_COUNT(val) bfin_write16(MDMA2_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_D1_IRQ_STATUS() bfin_read16(MDMA2_D1_IRQ_STATUS) +#define bfin_write_MDMA2_D1_IRQ_STATUS(val) bfin_write16(MDMA2_D1_IRQ_STATUS,val) +#define bfin_read_MDMA2_D1_PERIPHERAL_MAP() bfin_read16(MDMA2_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA2_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D1_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_S1_CONFIG() bfin_read16(MDMA2_S1_CONFIG) +#define bfin_write_MDMA2_S1_CONFIG(val) bfin_write16(MDMA2_S1_CONFIG,val) +#define bfin_read_MDMA2_S1_NEXT_DESC_PTR() bfin_read32(MDMA2_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA2_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_S1_START_ADDR() bfin_read32(MDMA2_S1_START_ADDR) +#define bfin_write_MDMA2_S1_START_ADDR(val) bfin_write32(MDMA2_S1_START_ADDR,val) +#define bfin_read_MDMA2_S1_X_COUNT() bfin_read16(MDMA2_S1_X_COUNT) +#define bfin_write_MDMA2_S1_X_COUNT(val) bfin_write16(MDMA2_S1_X_COUNT,val) +#define bfin_read_MDMA2_S1_Y_COUNT() bfin_read16(MDMA2_S1_Y_COUNT) +#define bfin_write_MDMA2_S1_Y_COUNT(val) bfin_write16(MDMA2_S1_Y_COUNT,val) +#define bfin_read_MDMA2_S1_X_MODIFY() bfin_read16(MDMA2_S1_X_MODIFY) +#define bfin_write_MDMA2_S1_X_MODIFY(val) bfin_write16(MDMA2_S1_X_MODIFY,val) +#define bfin_read_MDMA2_S1_Y_MODIFY() bfin_read16(MDMA2_S1_Y_MODIFY) +#define bfin_write_MDMA2_S1_Y_MODIFY(val) bfin_write16(MDMA2_S1_Y_MODIFY,val) +#define bfin_read_MDMA2_S1_CURR_DESC_PTR() bfin_read32(MDMA2_S1_CURR_DESC_PTR) +#define bfin_write_MDMA2_S1_CURR_DESC_PTR(val) bfin_write32(MDMA2_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_S1_CURR_ADDR() bfin_read32(MDMA2_S1_CURR_ADDR) +#define bfin_write_MDMA2_S1_CURR_ADDR(val) bfin_write32(MDMA2_S1_CURR_ADDR,val) +#define bfin_read_MDMA2_S1_CURR_X_COUNT() bfin_read16(MDMA2_S1_CURR_X_COUNT) +#define bfin_write_MDMA2_S1_CURR_X_COUNT(val) bfin_write16(MDMA2_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA2_S1_CURR_Y_COUNT() bfin_read16(MDMA2_S1_CURR_Y_COUNT) +#define bfin_write_MDMA2_S1_CURR_Y_COUNT(val) bfin_write16(MDMA2_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_S1_IRQ_STATUS() bfin_read16(MDMA2_S1_IRQ_STATUS) +#define bfin_write_MDMA2_S1_IRQ_STATUS(val) bfin_write16(MDMA2_S1_IRQ_STATUS,val) +#define bfin_read_MDMA2_S1_PERIPHERAL_MAP() bfin_read16(MDMA2_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA2_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S1_PERIPHERAL_MAP,val) +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define bfin_read_IMDMA_D0_CONFIG() bfin_read16(IMDMA_D0_CONFIG) +#define bfin_write_IMDMA_D0_CONFIG(val) bfin_write16(IMDMA_D0_CONFIG,val) +#define bfin_read_IMDMA_D0_NEXT_DESC_PTR() bfin_read32(IMDMA_D0_NEXT_DESC_PTR) +#define bfin_write_IMDMA_D0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_D0_START_ADDR() bfin_read32(IMDMA_D0_START_ADDR) +#define bfin_write_IMDMA_D0_START_ADDR(val) bfin_write32(IMDMA_D0_START_ADDR,val) +#define bfin_read_IMDMA_D0_X_COUNT() bfin_read16(IMDMA_D0_X_COUNT) +#define bfin_write_IMDMA_D0_X_COUNT(val) bfin_write16(IMDMA_D0_X_COUNT,val) +#define bfin_read_IMDMA_D0_Y_COUNT() bfin_read16(IMDMA_D0_Y_COUNT) +#define bfin_write_IMDMA_D0_Y_COUNT(val) bfin_write16(IMDMA_D0_Y_COUNT,val) +#define bfin_read_IMDMA_D0_X_MODIFY() bfin_read16(IMDMA_D0_X_MODIFY) +#define bfin_write_IMDMA_D0_X_MODIFY(val) bfin_write16(IMDMA_D0_X_MODIFY,val) +#define bfin_read_IMDMA_D0_Y_MODIFY() bfin_read16(IMDMA_D0_Y_MODIFY) +#define bfin_write_IMDMA_D0_Y_MODIFY(val) bfin_write16(IMDMA_D0_Y_MODIFY,val) +#define bfin_read_IMDMA_D0_CURR_DESC_PTR() bfin_read32(IMDMA_D0_CURR_DESC_PTR) +#define bfin_write_IMDMA_D0_CURR_DESC_PTR(val) bfin_write32(IMDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_D0_CURR_ADDR() bfin_read32(IMDMA_D0_CURR_ADDR) +#define bfin_write_IMDMA_D0_CURR_ADDR(val) bfin_write32(IMDMA_D0_CURR_ADDR,val) +#define bfin_read_IMDMA_D0_CURR_X_COUNT() bfin_read16(IMDMA_D0_CURR_X_COUNT) +#define bfin_write_IMDMA_D0_CURR_X_COUNT(val) bfin_write16(IMDMA_D0_CURR_X_COUNT,val) +#define bfin_read_IMDMA_D0_CURR_Y_COUNT() bfin_read16(IMDMA_D0_CURR_Y_COUNT) +#define bfin_write_IMDMA_D0_CURR_Y_COUNT(val) bfin_write16(IMDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_D0_IRQ_STATUS() bfin_read16(IMDMA_D0_IRQ_STATUS) +#define bfin_write_IMDMA_D0_IRQ_STATUS(val) bfin_write16(IMDMA_D0_IRQ_STATUS,val) +#define bfin_read_IMDMA_S0_CONFIG() bfin_read16(IMDMA_S0_CONFIG) +#define bfin_write_IMDMA_S0_CONFIG(val) bfin_write16(IMDMA_S0_CONFIG,val) +#define bfin_read_IMDMA_S0_NEXT_DESC_PTR() bfin_read32(IMDMA_S0_NEXT_DESC_PTR) +#define bfin_write_IMDMA_S0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_S0_START_ADDR() bfin_read32(IMDMA_S0_START_ADDR) +#define bfin_write_IMDMA_S0_START_ADDR(val) bfin_write32(IMDMA_S0_START_ADDR,val) +#define bfin_read_IMDMA_S0_X_COUNT() bfin_read16(IMDMA_S0_X_COUNT) +#define bfin_write_IMDMA_S0_X_COUNT(val) bfin_write16(IMDMA_S0_X_COUNT,val) +#define bfin_read_IMDMA_S0_Y_COUNT() bfin_read16(IMDMA_S0_Y_COUNT) +#define bfin_write_IMDMA_S0_Y_COUNT(val) bfin_write16(IMDMA_S0_Y_COUNT,val) +#define bfin_read_IMDMA_S0_X_MODIFY() bfin_read16(IMDMA_S0_X_MODIFY) +#define bfin_write_IMDMA_S0_X_MODIFY(val) bfin_write16(IMDMA_S0_X_MODIFY,val) +#define bfin_read_IMDMA_S0_Y_MODIFY() bfin_read16(IMDMA_S0_Y_MODIFY) +#define bfin_write_IMDMA_S0_Y_MODIFY(val) bfin_write16(IMDMA_S0_Y_MODIFY,val) +#define bfin_read_IMDMA_S0_CURR_DESC_PTR() bfin_read32(IMDMA_S0_CURR_DESC_PTR) +#define bfin_write_IMDMA_S0_CURR_DESC_PTR(val) bfin_write32(IMDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_S0_CURR_ADDR() bfin_read32(IMDMA_S0_CURR_ADDR) +#define bfin_write_IMDMA_S0_CURR_ADDR(val) bfin_write32(IMDMA_S0_CURR_ADDR,val) +#define bfin_read_IMDMA_S0_CURR_X_COUNT() bfin_read16(IMDMA_S0_CURR_X_COUNT) +#define bfin_write_IMDMA_S0_CURR_X_COUNT(val) bfin_write16(IMDMA_S0_CURR_X_COUNT,val) +#define bfin_read_IMDMA_S0_CURR_Y_COUNT() bfin_read16(IMDMA_S0_CURR_Y_COUNT) +#define bfin_write_IMDMA_S0_CURR_Y_COUNT(val) bfin_write16(IMDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_S0_IRQ_STATUS() bfin_read16(IMDMA_S0_IRQ_STATUS) +#define bfin_write_IMDMA_S0_IRQ_STATUS(val) bfin_write16(IMDMA_S0_IRQ_STATUS,val) +#define bfin_read_IMDMA_D1_CONFIG() bfin_read16(IMDMA_D1_CONFIG) +#define bfin_write_IMDMA_D1_CONFIG(val) bfin_write16(IMDMA_D1_CONFIG,val) +#define bfin_read_IMDMA_D1_NEXT_DESC_PTR() bfin_read32(IMDMA_D1_NEXT_DESC_PTR) +#define bfin_write_IMDMA_D1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_D1_START_ADDR() bfin_read32(IMDMA_D1_START_ADDR) +#define bfin_write_IMDMA_D1_START_ADDR(val) bfin_write32(IMDMA_D1_START_ADDR,val) +#define bfin_read_IMDMA_D1_X_COUNT() bfin_read16(IMDMA_D1_X_COUNT) +#define bfin_write_IMDMA_D1_X_COUNT(val) bfin_write16(IMDMA_D1_X_COUNT,val) +#define bfin_read_IMDMA_D1_Y_COUNT() bfin_read16(IMDMA_D1_Y_COUNT) +#define bfin_write_IMDMA_D1_Y_COUNT(val) bfin_write16(IMDMA_D1_Y_COUNT,val) +#define bfin_read_IMDMA_D1_X_MODIFY() bfin_read16(IMDMA_D1_X_MODIFY) +#define bfin_write_IMDMA_D1_X_MODIFY(val) bfin_write16(IMDMA_D1_X_MODIFY,val) +#define bfin_read_IMDMA_D1_Y_MODIFY() bfin_read16(IMDMA_D1_Y_MODIFY) +#define bfin_write_IMDMA_D1_Y_MODIFY(val) bfin_write16(IMDMA_D1_Y_MODIFY,val) +#define bfin_read_IMDMA_D1_CURR_DESC_PTR() bfin_read32(IMDMA_D1_CURR_DESC_PTR) +#define bfin_write_IMDMA_D1_CURR_DESC_PTR(val) bfin_write32(IMDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_D1_CURR_ADDR() bfin_read32(IMDMA_D1_CURR_ADDR) +#define bfin_write_IMDMA_D1_CURR_ADDR(val) bfin_write32(IMDMA_D1_CURR_ADDR,val) +#define bfin_read_IMDMA_D1_CURR_X_COUNT() bfin_read16(IMDMA_D1_CURR_X_COUNT) +#define bfin_write_IMDMA_D1_CURR_X_COUNT(val) bfin_write16(IMDMA_D1_CURR_X_COUNT,val) +#define bfin_read_IMDMA_D1_CURR_Y_COUNT() bfin_read16(IMDMA_D1_CURR_Y_COUNT) +#define bfin_write_IMDMA_D1_CURR_Y_COUNT(val) bfin_write16(IMDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_D1_IRQ_STATUS() bfin_read16(IMDMA_D1_IRQ_STATUS) +#define bfin_write_IMDMA_D1_IRQ_STATUS(val) bfin_write16(IMDMA_D1_IRQ_STATUS,val) +#define bfin_read_IMDMA_S1_CONFIG() bfin_read16(IMDMA_S1_CONFIG) +#define bfin_write_IMDMA_S1_CONFIG(val) bfin_write16(IMDMA_S1_CONFIG,val) +#define bfin_read_IMDMA_S1_NEXT_DESC_PTR() bfin_read32(IMDMA_S1_NEXT_DESC_PTR) +#define bfin_write_IMDMA_S1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_S1_START_ADDR() bfin_read32(IMDMA_S1_START_ADDR) +#define bfin_write_IMDMA_S1_START_ADDR(val) bfin_write32(IMDMA_S1_START_ADDR,val) +#define bfin_read_IMDMA_S1_X_COUNT() bfin_read16(IMDMA_S1_X_COUNT) +#define bfin_write_IMDMA_S1_X_COUNT(val) bfin_write16(IMDMA_S1_X_COUNT,val) +#define bfin_read_IMDMA_S1_Y_COUNT() bfin_read16(IMDMA_S1_Y_COUNT) +#define bfin_write_IMDMA_S1_Y_COUNT(val) bfin_write16(IMDMA_S1_Y_COUNT,val) +#define bfin_read_IMDMA_S1_X_MODIFY() bfin_read16(IMDMA_S1_X_MODIFY) +#define bfin_write_IMDMA_S1_X_MODIFY(val) bfin_write16(IMDMA_S1_X_MODIFY,val) +#define bfin_read_IMDMA_S1_Y_MODIFY() bfin_read16(IMDMA_S1_Y_MODIFY) +#define bfin_write_IMDMA_S1_Y_MODIFY(val) bfin_write16(IMDMA_S1_Y_MODIFY,val) +#define bfin_read_IMDMA_S1_CURR_DESC_PTR() bfin_read32(IMDMA_S1_CURR_DESC_PTR) +#define bfin_write_IMDMA_S1_CURR_DESC_PTR(val) bfin_write32(IMDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_S1_CURR_ADDR() bfin_read32(IMDMA_S1_CURR_ADDR) +#define bfin_write_IMDMA_S1_CURR_ADDR(val) bfin_write32(IMDMA_S1_CURR_ADDR,val) +#define bfin_read_IMDMA_S1_CURR_X_COUNT() bfin_read16(IMDMA_S1_CURR_X_COUNT) +#define bfin_write_IMDMA_S1_CURR_X_COUNT(val) bfin_write16(IMDMA_S1_CURR_X_COUNT,val) +#define bfin_read_IMDMA_S1_CURR_Y_COUNT() bfin_read16(IMDMA_S1_CURR_Y_COUNT) +#define bfin_write_IMDMA_S1_CURR_Y_COUNT(val) bfin_write16(IMDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_S1_IRQ_STATUS() bfin_read16(IMDMA_S1_IRQ_STATUS) +#define bfin_write_IMDMA_S1_IRQ_STATUS(val) bfin_write16(IMDMA_S1_IRQ_STATUS,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read_MDMA1_S0_CONFIG() +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA1_S0_CONFIG(val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read_MDMA1_S0_IRQ_STATUS() +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA1_S0_IRQ_STATUS(val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read_MDMA1_S0_X_MODIFY() +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA1_S0_X_MODIFY(val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read_MDMA1_S0_Y_MODIFY() +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA1_S0_Y_MODIFY(val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read_MDMA1_S0_X_COUNT() +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA1_S0_X_COUNT(val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read_MDMA1_S0_Y_COUNT() +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA1_S0_Y_COUNT(val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read_MDMA1_S0_START_ADDR() +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA1_S0_START_ADDR(val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read_MDMA1_D0_CONFIG() +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA1_D0_CONFIG(val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read_MDMA1_D0_IRQ_STATUS() +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA1_D0_IRQ_STATUS(val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read_MDMA1_D0_X_MODIFY() +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA1_D0_X_MODIFY(val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read_MDMA1_D0_Y_MODIFY() +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA1_D0_Y_MODIFY(val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read_MDMA1_D0_X_COUNT() +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA1_D0_X_COUNT(val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read_MDMA1_D0_Y_COUNT() +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA1_D0_Y_COUNT(val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA1_D0_START_ADDR() +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val) + +#endif /* _CDEF_BF561_H */ diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h new file mode 100644 index 00000000000..4eca2026bb9 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -0,0 +1,1758 @@ + +/* + * File: include/asm-blackfin/mach-bf561/defBF561.h + * Based on: + * Author: + * + * Created: + * Description: + * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF561_H +#define _DEF_BF561_H +/* +#if !defined(__ADSPBF561__) +#warning defBF561.h should only be included for BF561 chip. +#endif +*/ +/* include all Core registers and bit definitions */ +#include <asm/def_LPBlackfin.h> + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ + +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ +#define SWRST SICA_SWRST +#define SYSCR SICA_SYSCR +#define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A) +#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A) +#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A) +#define RESET_SOFTWARE (SWRST_OCCURRED) + +/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ +#define SICA_SWRST 0xFFC00100 /* Software Reset register */ +#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ +#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ +#define SICB_SWRST 0xFFC01100 /* reserved */ +#define SICB_SYSCR 0xFFC01104 /* reserved */ +#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ +#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ +#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ +#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ +#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ +#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ +#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ +#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ +#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ +#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ +#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ +#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ +#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ +#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ +#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ +#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART0_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI0_REGBASE 0xFFC00500 +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ + +#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ +#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ +#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ +#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ + +#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ +#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ +#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ +#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ + +#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ +#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ +#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ +#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ + +#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ +#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ +#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ +#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ + +#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ +#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ +#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO0_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register (mask used to directly */ +#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ +#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ +#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register (mask used to */ +#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ +#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ +#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ +#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ +#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ +#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ +#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ +#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ +#define FIO1_DIR 0xFFC01530 /* Flag Direction register */ +#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ +#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ +#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ +#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register (mask used to directly */ +#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ +#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ +#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register (mask used to */ +#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ +#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ +#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ +#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ +#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ +#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ +#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ +#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ +#define FIO2_DIR 0xFFC01730 /* Flag Direction register */ +#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ +#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ +#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ +#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ +#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ +#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ +#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ +#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ + +/*DMA traffic control registers */ +#define DMA1_TC_PER 0xFFC01B0C /* Traffic control periods */ +#define DMA1_TC_CNT 0xFFC01B10 /* Traffic control current counts */ +#define DMA2_TC_PER 0xFFC00B0C /* Traffic control periods */ +#define DMA2_TC_CNT 0xFFC00B10 /* Traffic control current counts */ + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */ +#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ +#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ +#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ +#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ +#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ +#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ +#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ +#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ +#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ +#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ +#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ +#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */ +#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ + +#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ +#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ +#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ +#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ +#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ +#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ +#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ +#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ +#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ +#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ +#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ +#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */ +#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ + +#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ +#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ +#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ +#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ +#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ +#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ +#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ +#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ +#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ +#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ +#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ +#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */ +#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ + +#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ +#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ +#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ +#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ +#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ +#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ +#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ +#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ +#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ +#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ +#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ +#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */ +#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ + +#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ +#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ +#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ +#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ +#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ +#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ +#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ +#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ +#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ +#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ +#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ +#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */ +#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ + +#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ +#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ +#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ +#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ +#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ +#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ +#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ +#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ +#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ +#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ +#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ +#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */ +#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ + +#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ +#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ +#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ +#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ +#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ +#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ +#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ +#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ +#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ +#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ +#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ +#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */ +#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ + +#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ +#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ +#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ +#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ +#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ +#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ +#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ +#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ +#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ +#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ +#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ +#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */ +#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ + +#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ +#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ +#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ +#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ +#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ +#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ +#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ +#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ +#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ +#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ +#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ +#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */ +#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ + +#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ +#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ +#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ +#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ +#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ +#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ +#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ +#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ +#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ +#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ +#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ +#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */ +#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ + +#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ +#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ +#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ +#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ +#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ +#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ +#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ +#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ +#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ +#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ +#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ +#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */ +#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */ +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA1_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */ +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA1_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */ +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA1_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */ +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */ + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */ +#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */ +#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */ +#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */ +#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */ +#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */ +#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */ +#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ +#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ +#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ +#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ +#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ +#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ +#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ +#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ +#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ +#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ +#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ +#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */ +#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ + +#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ +#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ +#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ +#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ +#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ +#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ +#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ +#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ +#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ +#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ +#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ +#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */ +#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ + +#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ +#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ +#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ +#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ +#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ +#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ +#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ +#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ +#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ +#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ +#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ +#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */ +#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ + +#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ +#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ +#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ +#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ +#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ +#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ +#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ +#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ +#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ +#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ +#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ +#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */ +#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ + +#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ +#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ +#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ +#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ +#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ +#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ +#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ +#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ +#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ +#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ +#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ +#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */ +#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define MDMA2_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */ +#define MDMA2_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA2_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA2_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */ +#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA2_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */ +#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA2_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */ +#define MDMA2_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA2_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA2_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */ +#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA2_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */ +#define MDMA2_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA2_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA2_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA2_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */ +#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA2_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */ +#define MDMA2_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */ +#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */ +#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */ +#define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */ +#define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */ +#define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */ +#define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */ +#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */ +#define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */ +#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */ +#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */ +#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */ + +#define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */ +#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */ +#define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */ +#define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */ +#define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */ +#define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */ +#define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */ +#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */ +#define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */ +#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */ +#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */ +#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */ + +#define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */ +#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */ +#define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */ +#define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */ +#define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */ +#define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */ +#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */ +#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */ +#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */ +#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */ +#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */ + +#define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */ +#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */ +#define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */ +#define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */ +#define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */ +#define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */ +#define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */ +#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */ +#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */ +#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */ +#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */ +#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */ + +/*********************************************************************************** */ +/* System MMR Register Bits */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + +/* PLL_DIV Masks */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CSEL 0x30 /* Core Select */ +#define SSEL 0xf /* System Select */ +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x0007 /* Initiates a system software reset */ +#define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */ +#define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */ +#define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */ +#define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */ +#define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x8000 /* SWRST Status */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + +/* SICu_IARv Masks */ +/* u = A or B */ +/* v = 0 to 7 */ +/* w = 0 or 1 */ + +/* Per_number = 0 to 63 */ +/* IVG_number = 7 to 15 */ +#define Peripheral_IVG(Per_number, IVG_number) \ + ((IVG_number) - 7) << (((Per_number) % 8) * 4) /* Peripheral #Per_number assigned IVG #IVG_number */ + /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */ + /* r0.h = hi(Peripheral_IVG(62, 10)); */ + +/* SICx_IMASKw Masks */ +/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +/* x = pos 0 to 31, for 32-63 use value-32 */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* ***************************** UART CONTROLLER MASKS ********************** */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* ********** SERIAL PORT MASKS ********************** */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /*RX Word Length */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ +#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* ********** DMA CONTROLLER MASKS *********************8 */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define DMAFLOW 0x00007000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 +#define TIMEN3 0x0008 +#define TIMEN4 0x0010 +#define TIMEN5 0x0020 +#define TIMEN6 0x0040 +#define TIMEN7 0x0080 +#define TIMEN8 0x0001 +#define TIMEN9 0x0002 +#define TIMEN10 0x0004 +#define TIMEN11 0x0008 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 +#define TIMEN3_P 0x03 +#define TIMEN4_P 0x04 +#define TIMEN5_P 0x05 +#define TIMEN6_P 0x06 +#define TIMEN7_P 0x07 +#define TIMEN8_P 0x00 +#define TIMEN9_P 0x01 +#define TIMEN10_P 0x02 +#define TIMEN11_P 0x03 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 +#define TIMDIS3 0x0008 +#define TIMDIS4 0x0010 +#define TIMDIS5 0x0020 +#define TIMDIS6 0x0040 +#define TIMDIS7 0x0080 +#define TIMDIS8 0x0001 +#define TIMDIS9 0x0002 +#define TIMDIS10 0x0004 +#define TIMDIS11 0x0008 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 +#define TIMDIS3_P 0x03 +#define TIMDIS4_P 0x04 +#define TIMDIS5_P 0x05 +#define TIMDIS6_P 0x06 +#define TIMDIS7_P 0x07 +#define TIMDIS8_P 0x00 +#define TIMDIS9_P 0x01 +#define TIMDIS10_P 0x02 +#define TIMDIS11_P 0x03 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x00000001 +#define TIMIL1 0x00000002 +#define TIMIL2 0x00000004 +#define TIMIL3 0x00000008 +#define TIMIL4 0x00010000 +#define TIMIL5 0x00020000 +#define TIMIL6 0x00040000 +#define TIMIL7 0x00080000 +#define TIMIL8 0x0001 +#define TIMIL9 0x0002 +#define TIMIL10 0x0004 +#define TIMIL11 0x0008 +#define TOVF_ERR0 0x00000010 +#define TOVF_ERR1 0x00000020 +#define TOVF_ERR2 0x00000040 +#define TOVF_ERR3 0x00000080 +#define TOVF_ERR4 0x00100000 +#define TOVF_ERR5 0x00200000 +#define TOVF_ERR6 0x00400000 +#define TOVF_ERR7 0x00800000 +#define TOVF_ERR8 0x0010 +#define TOVF_ERR9 0x0020 +#define TOVF_ERR10 0x0040 +#define TOVF_ERR11 0x0080 +#define TRUN0 0x00001000 +#define TRUN1 0x00002000 +#define TRUN2 0x00004000 +#define TRUN3 0x00008000 +#define TRUN4 0x10000000 +#define TRUN5 0x20000000 +#define TRUN6 0x40000000 +#define TRUN7 0x80000000 +#define TRUN8 0x1000 +#define TRUN9 0x2000 +#define TRUN10 0x4000 +#define TRUN11 0x8000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TIMIL3_P 0x03 +#define TIMIL4_P 0x10 +#define TIMIL5_P 0x11 +#define TIMIL6_P 0x12 +#define TIMIL7_P 0x13 +#define TIMIL8_P 0x00 +#define TIMIL9_P 0x01 +#define TIMIL10_P 0x02 +#define TIMIL11_P 0x03 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 +#define TOVF_ERR3_P 0x07 +#define TOVF_ERR4_P 0x14 +#define TOVF_ERR5_P 0x15 +#define TOVF_ERR6_P 0x16 +#define TOVF_ERR7_P 0x17 +#define TOVF_ERR8_P 0x04 +#define TOVF_ERR9_P 0x05 +#define TOVF_ERR10_P 0x06 +#define TOVF_ERR11_P 0x07 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E +#define TRUN3_P 0x0F +#define TRUN4_P 0x1C +#define TRUN5_P 0x1D +#define TRUN6_P 0x1E +#define TRUN7_P 0x1F +#define TRUN8_P 0x0C +#define TRUN9_P 0x0D +#define TRUN10_P 0x0E +#define TRUN11_P 0x0F + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 +#define TOVL_ERR8 TOVF_ERR8 +#define TOVL_ERR9 TOVF_ERR9 +#define TOVL_ERR10 TOVF_ERR10 +#define TOVL_ERR11 TOVF_ERR11 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P +#define TOVL_ERR3_P TOVF_ERR3_P +#define TOVL_ERR4_P TOVF_ERR4_P +#define TOVL_ERR5_P TOVF_ERR5_P +#define TOVL_ERR6_P TOVF_ERR6_P +#define TOVL_ERR7_P TOVF_ERR7_P +#define TOVL_ERR8_P TOVF_ERR8_P +#define TOVL_ERR9_P TOVF_ERR9_P +#define TOVL_ERR10_P TOVF_ERR10_P +#define TOVL_ERR11_P TOVF_ERR11_P + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ + +/* AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ +#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ + +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ +#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ +#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ +#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ +#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ + +#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ +#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ +#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ +#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ +#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ + +#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ +#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ +#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ +#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ +#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#endif /* _DEF_BF561_H */ diff --git a/arch/blackfin/mach-bf561/include/mach/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h new file mode 100644 index 00000000000..8bc46cd89a0 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/dma.h @@ -0,0 +1,35 @@ +/***************************************************************************** +* +* BF-533/2/1 Specific Declarations +* +****************************************************************************/ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 36 + +#define CH_PPI0 0 +#define CH_PPI (CH_PPI0) +#define CH_PPI1 1 +#define CH_SPORT0_RX 12 +#define CH_SPORT0_TX 13 +#define CH_SPORT1_RX 14 +#define CH_SPORT1_TX 15 +#define CH_SPI 16 +#define CH_UART_RX 17 +#define CH_UART_TX 18 +#define CH_MEM_STREAM0_DEST 24 /* TX */ +#define CH_MEM_STREAM0_SRC 25 /* RX */ +#define CH_MEM_STREAM1_DEST 26 /* TX */ +#define CH_MEM_STREAM1_SRC 27 /* RX */ +#define CH_MEM_STREAM2_DEST 28 +#define CH_MEM_STREAM2_SRC 29 +#define CH_MEM_STREAM3_DEST 30 +#define CH_MEM_STREAM3_SRC 31 +#define CH_IMEM_STREAM0_DEST 32 +#define CH_IMEM_STREAM0_SRC 33 +#define CH_IMEM_STREAM1_DEST 34 +#define CH_IMEM_STREAM1_SRC 35 + +#endif diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h new file mode 100644 index 00000000000..6698389c556 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/irq.h @@ -0,0 +1,447 @@ + +/* + * File: include/asm-blackfin/mach-bf561/irq.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BF561_IRQ_H_ +#define _BF561_IRQ_H_ + +/*********************************************************************** + * Interrupt source definitions: + Event Source Core Event Name IRQ No + (highest priority) + Emulation Events EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + PLL Wakeup Interrupt IVG7 7 + DMA1 Error (generic) IVG7 8 + DMA2 Error (generic) IVG7 9 + IMDMA Error (generic) IVG7 10 + PPI1 Error Interrupt IVG7 11 + PPI2 Error Interrupt IVG7 12 + SPORT0 Error Interrupt IVG7 13 + SPORT1 Error Interrupt IVG7 14 + SPI Error Interrupt IVG7 15 + UART Error Interrupt IVG7 16 + Reserved Interrupt IVG7 17 + + DMA1 0 Interrupt(PPI1) IVG8 18 + DMA1 1 Interrupt(PPI2) IVG8 19 + DMA1 2 Interrupt IVG8 20 + DMA1 3 Interrupt IVG8 21 + DMA1 4 Interrupt IVG8 22 + DMA1 5 Interrupt IVG8 23 + DMA1 6 Interrupt IVG8 24 + DMA1 7 Interrupt IVG8 25 + DMA1 8 Interrupt IVG8 26 + DMA1 9 Interrupt IVG8 27 + DMA1 10 Interrupt IVG8 28 + DMA1 11 Interrupt IVG8 29 + + DMA2 0 (SPORT0 RX) IVG9 30 + DMA2 1 (SPORT0 TX) IVG9 31 + DMA2 2 (SPORT1 RX) IVG9 32 + DMA2 3 (SPORT2 TX) IVG9 33 + DMA2 4 (SPI) IVG9 34 + DMA2 5 (UART RX) IVG9 35 + DMA2 6 (UART TX) IVG9 36 + DMA2 7 Interrupt IVG9 37 + DMA2 8 Interrupt IVG9 38 + DMA2 9 Interrupt IVG9 39 + DMA2 10 Interrupt IVG9 40 + DMA2 11 Interrupt IVG9 41 + + TIMER 0 Interrupt IVG10 42 + TIMER 1 Interrupt IVG10 43 + TIMER 2 Interrupt IVG10 44 + TIMER 3 Interrupt IVG10 45 + TIMER 4 Interrupt IVG10 46 + TIMER 5 Interrupt IVG10 47 + TIMER 6 Interrupt IVG10 48 + TIMER 7 Interrupt IVG10 49 + TIMER 8 Interrupt IVG10 50 + TIMER 9 Interrupt IVG10 51 + TIMER 10 Interrupt IVG10 52 + TIMER 11 Interrupt IVG10 53 + + Programmable Flags0 A (8) IVG11 54 + Programmable Flags0 B (8) IVG11 55 + Programmable Flags1 A (8) IVG11 56 + Programmable Flags1 B (8) IVG11 57 + Programmable Flags2 A (8) IVG11 58 + Programmable Flags2 B (8) IVG11 59 + + MDMA1 0 write/read INT IVG8 60 + MDMA1 1 write/read INT IVG8 61 + + MDMA2 0 write/read INT IVG9 62 + MDMA2 1 write/read INT IVG9 63 + + IMDMA 0 write/read INT IVG12 64 + IMDMA 1 write/read INT IVG12 65 + + Watch Dog Timer IVG13 66 + + Reserved interrupt IVG7 67 + Reserved interrupt IVG7 68 + Supplemental interrupt 0 IVG7 69 + supplemental interrupt 1 IVG7 70 + + Softirq IVG14 + System Call -- + (lowest priority) IVG15 + + **********************************************************************/ + +#define SYS_IRQS 71 +#define NR_PERI_INTS 64 + +/* + * The ABSTRACT IRQ definitions + * the first seven of the following are fixed, + * the rest you change if you need to. + */ +/* IVG 0-6*/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* Reset */ +#define IRQ_NMI 2 /* Non Maskable Interrupt */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* Reserved interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IVG_BASE 7 +/* IVG 7 */ +#define IRQ_PLL_WAKEUP (IVG_BASE + 0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA1_ERROR (IVG_BASE + 1) /* DMA1 Error (general) */ +#define IRQ_DMA_ERROR IRQ_DMA1_ERROR /* DMA1 Error (general) */ +#define IRQ_DMA2_ERROR (IVG_BASE + 2) /* DMA2 Error (general) */ +#define IRQ_IMDMA_ERROR (IVG_BASE + 3) /* IMDMA Error Interrupt */ +#define IRQ_PPI1_ERROR (IVG_BASE + 4) /* PPI1 Error Interrupt */ +#define IRQ_PPI_ERROR IRQ_PPI1_ERROR /* PPI1 Error Interrupt */ +#define IRQ_PPI2_ERROR (IVG_BASE + 5) /* PPI2 Error Interrupt */ +#define IRQ_SPORT0_ERROR (IVG_BASE + 6) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR (IVG_BASE + 7) /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR (IVG_BASE + 8) /* SPI Error Interrupt */ +#define IRQ_UART_ERROR (IVG_BASE + 9) /* UART Error Interrupt */ +#define IRQ_RESERVED_ERROR (IVG_BASE + 10) /* Reversed Interrupt */ +/* IVG 8 */ +#define IRQ_DMA1_0 (IVG_BASE + 11) /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI0 IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_DMA1_1 (IVG_BASE + 12) /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_PPI1 IRQ_DMA1_1 /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_DMA1_2 (IVG_BASE + 13) /* DMA1 2 Interrupt */ +#define IRQ_DMA1_3 (IVG_BASE + 14) /* DMA1 3 Interrupt */ +#define IRQ_DMA1_4 (IVG_BASE + 15) /* DMA1 4 Interrupt */ +#define IRQ_DMA1_5 (IVG_BASE + 16) /* DMA1 5 Interrupt */ +#define IRQ_DMA1_6 (IVG_BASE + 17) /* DMA1 6 Interrupt */ +#define IRQ_DMA1_7 (IVG_BASE + 18) /* DMA1 7 Interrupt */ +#define IRQ_DMA1_8 (IVG_BASE + 19) /* DMA1 8 Interrupt */ +#define IRQ_DMA1_9 (IVG_BASE + 20) /* DMA1 9 Interrupt */ +#define IRQ_DMA1_10 (IVG_BASE + 21) /* DMA1 10 Interrupt */ +#define IRQ_DMA1_11 (IVG_BASE + 22) /* DMA1 11 Interrupt */ +/* IVG 9 */ +#define IRQ_DMA2_0 (IVG_BASE + 23) /* DMA2 0 (SPORT0 RX) */ +#define IRQ_SPORT0_RX IRQ_DMA2_0 /* DMA2 0 (SPORT0 RX) */ +#define IRQ_DMA2_1 (IVG_BASE + 24) /* DMA2 1 (SPORT0 TX) */ +#define IRQ_SPORT0_TX IRQ_DMA2_1 /* DMA2 1 (SPORT0 TX) */ +#define IRQ_DMA2_2 (IVG_BASE + 25) /* DMA2 2 (SPORT1 RX) */ +#define IRQ_SPORT1_RX IRQ_DMA2_2 /* DMA2 2 (SPORT1 RX) */ +#define IRQ_DMA2_3 (IVG_BASE + 26) /* DMA2 3 (SPORT2 TX) */ +#define IRQ_SPORT1_TX IRQ_DMA2_3 /* DMA2 3 (SPORT2 TX) */ +#define IRQ_DMA2_4 (IVG_BASE + 27) /* DMA2 4 (SPI) */ +#define IRQ_SPI IRQ_DMA2_4 /* DMA2 4 (SPI) */ +#define IRQ_DMA2_5 (IVG_BASE + 28) /* DMA2 5 (UART RX) */ +#define IRQ_UART_RX IRQ_DMA2_5 /* DMA2 5 (UART RX) */ +#define IRQ_DMA2_6 (IVG_BASE + 29) /* DMA2 6 (UART TX) */ +#define IRQ_UART_TX IRQ_DMA2_6 /* DMA2 6 (UART TX) */ +#define IRQ_DMA2_7 (IVG_BASE + 30) /* DMA2 7 Interrupt */ +#define IRQ_DMA2_8 (IVG_BASE + 31) /* DMA2 8 Interrupt */ +#define IRQ_DMA2_9 (IVG_BASE + 32) /* DMA2 9 Interrupt */ +#define IRQ_DMA2_10 (IVG_BASE + 33) /* DMA2 10 Interrupt */ +#define IRQ_DMA2_11 (IVG_BASE + 34) /* DMA2 11 Interrupt */ +/* IVG 10 */ +#define IRQ_TIMER0 (IVG_BASE + 35) /* TIMER 0 Interrupt */ +#define IRQ_TIMER1 (IVG_BASE + 36) /* TIMER 1 Interrupt */ +#define IRQ_TIMER2 (IVG_BASE + 37) /* TIMER 2 Interrupt */ +#define IRQ_TIMER3 (IVG_BASE + 38) /* TIMER 3 Interrupt */ +#define IRQ_TIMER4 (IVG_BASE + 39) /* TIMER 4 Interrupt */ +#define IRQ_TIMER5 (IVG_BASE + 40) /* TIMER 5 Interrupt */ +#define IRQ_TIMER6 (IVG_BASE + 41) /* TIMER 6 Interrupt */ +#define IRQ_TIMER7 (IVG_BASE + 42) /* TIMER 7 Interrupt */ +#define IRQ_TIMER8 (IVG_BASE + 43) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 (IVG_BASE + 44) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 (IVG_BASE + 45) /* TIMER 10 Interrupt */ +#define IRQ_TIMER11 (IVG_BASE + 46) /* TIMER 11 Interrupt */ +/* IVG 11 */ +#define IRQ_PROG0_INTA (IVG_BASE + 47) /* Programmable Flags0 A (8) */ +#define IRQ_PROG_INTA IRQ_PROG0_INTA /* Programmable Flags0 A (8) */ +#define IRQ_PROG0_INTB (IVG_BASE + 48) /* Programmable Flags0 B (8) */ +#define IRQ_PROG_INTB IRQ_PROG0_INTB /* Programmable Flags0 B (8) */ +#define IRQ_PROG1_INTA (IVG_BASE + 49) /* Programmable Flags1 A (8) */ +#define IRQ_PROG1_INTB (IVG_BASE + 50) /* Programmable Flags1 B (8) */ +#define IRQ_PROG2_INTA (IVG_BASE + 51) /* Programmable Flags2 A (8) */ +#define IRQ_PROG2_INTB (IVG_BASE + 52) /* Programmable Flags2 B (8) */ +/* IVG 8 */ +#define IRQ_DMA1_WRRD0 (IVG_BASE + 53) /* MDMA1 0 write/read INT */ +#define IRQ_DMA_WRRD0 IRQ_DMA1_WRRD0 /* MDMA1 0 write/read INT */ +#define IRQ_MEM_DMA0 IRQ_DMA1_WRRD0 +#define IRQ_DMA1_WRRD1 (IVG_BASE + 54) /* MDMA1 1 write/read INT */ +#define IRQ_DMA_WRRD1 IRQ_DMA1_WRRD1 /* MDMA1 1 write/read INT */ +#define IRQ_MEM_DMA1 IRQ_DMA1_WRRD1 +/* IVG 9 */ +#define IRQ_DMA2_WRRD0 (IVG_BASE + 55) /* MDMA2 0 write/read INT */ +#define IRQ_MEM_DMA2 IRQ_DMA2_WRRD0 +#define IRQ_DMA2_WRRD1 (IVG_BASE + 56) /* MDMA2 1 write/read INT */ +#define IRQ_MEM_DMA3 IRQ_DMA2_WRRD1 +/* IVG 12 */ +#define IRQ_IMDMA_WRRD0 (IVG_BASE + 57) /* IMDMA 0 write/read INT */ +#define IRQ_IMEM_DMA0 IRQ_IMDMA_WRRD0 +#define IRQ_IMDMA_WRRD1 (IVG_BASE + 58) /* IMDMA 1 write/read INT */ +#define IRQ_IMEM_DMA1 IRQ_IMDMA_WRRD1 +/* IVG 13 */ +#define IRQ_WATCH (IVG_BASE + 59) /* Watch Dog Timer */ +/* IVG 7 */ +#define IRQ_RESERVED_1 (IVG_BASE + 60) /* Reserved interrupt */ +#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */ +#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */ +#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */ + +#define IRQ_PF0 73 +#define IRQ_PF1 74 +#define IRQ_PF2 75 +#define IRQ_PF3 76 +#define IRQ_PF4 77 +#define IRQ_PF5 78 +#define IRQ_PF6 79 +#define IRQ_PF7 80 +#define IRQ_PF8 81 +#define IRQ_PF9 82 +#define IRQ_PF10 83 +#define IRQ_PF11 84 +#define IRQ_PF12 85 +#define IRQ_PF13 86 +#define IRQ_PF14 87 +#define IRQ_PF15 88 +#define IRQ_PF16 89 +#define IRQ_PF17 90 +#define IRQ_PF18 91 +#define IRQ_PF19 92 +#define IRQ_PF20 93 +#define IRQ_PF21 94 +#define IRQ_PF22 95 +#define IRQ_PF23 96 +#define IRQ_PF24 97 +#define IRQ_PF25 98 +#define IRQ_PF26 99 +#define IRQ_PF27 100 +#define IRQ_PF28 101 +#define IRQ_PF29 102 +#define IRQ_PF30 103 +#define IRQ_PF31 104 +#define IRQ_PF32 105 +#define IRQ_PF33 106 +#define IRQ_PF34 107 +#define IRQ_PF35 108 +#define IRQ_PF36 109 +#define IRQ_PF37 110 +#define IRQ_PF38 111 +#define IRQ_PF39 112 +#define IRQ_PF40 113 +#define IRQ_PF41 114 +#define IRQ_PF42 115 +#define IRQ_PF43 116 +#define IRQ_PF44 117 +#define IRQ_PF45 118 +#define IRQ_PF46 119 +#define IRQ_PF47 120 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_IRQS (IRQ_PF47 + 1) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* + * DEFAULT PRIORITIES: + */ + +#define CONFIG_DEF_PLL_WAKEUP 7 +#define CONFIG_DEF_DMA1_ERROR 7 +#define CONFIG_DEF_DMA2_ERROR 7 +#define CONFIG_DEF_IMDMA_ERROR 7 +#define CONFIG_DEF_PPI1_ERROR 7 +#define CONFIG_DEF_PPI2_ERROR 7 +#define CONFIG_DEF_SPORT0_ERROR 7 +#define CONFIG_DEF_SPORT1_ERROR 7 +#define CONFIG_DEF_SPI_ERROR 7 +#define CONFIG_DEF_UART_ERROR 7 +#define CONFIG_DEF_RESERVED_ERROR 7 +#define CONFIG_DEF_DMA1_0 8 +#define CONFIG_DEF_DMA1_1 8 +#define CONFIG_DEF_DMA1_2 8 +#define CONFIG_DEF_DMA1_3 8 +#define CONFIG_DEF_DMA1_4 8 +#define CONFIG_DEF_DMA1_5 8 +#define CONFIG_DEF_DMA1_6 8 +#define CONFIG_DEF_DMA1_7 8 +#define CONFIG_DEF_DMA1_8 8 +#define CONFIG_DEF_DMA1_9 8 +#define CONFIG_DEF_DMA1_10 8 +#define CONFIG_DEF_DMA1_11 8 +#define CONFIG_DEF_DMA2_0 9 +#define CONFIG_DEF_DMA2_1 9 +#define CONFIG_DEF_DMA2_2 9 +#define CONFIG_DEF_DMA2_3 9 +#define CONFIG_DEF_DMA2_4 9 +#define CONFIG_DEF_DMA2_5 9 +#define CONFIG_DEF_DMA2_6 9 +#define CONFIG_DEF_DMA2_7 9 +#define CONFIG_DEF_DMA2_8 9 +#define CONFIG_DEF_DMA2_9 9 +#define CONFIG_DEF_DMA2_10 9 +#define CONFIG_DEF_DMA2_11 9 +#define CONFIG_DEF_TIMER0 10 +#define CONFIG_DEF_TIMER1 10 +#define CONFIG_DEF_TIMER2 10 +#define CONFIG_DEF_TIMER3 10 +#define CONFIG_DEF_TIMER4 10 +#define CONFIG_DEF_TIMER5 10 +#define CONFIG_DEF_TIMER6 10 +#define CONFIG_DEF_TIMER7 10 +#define CONFIG_DEF_TIMER8 10 +#define CONFIG_DEF_TIMER9 10 +#define CONFIG_DEF_TIMER10 10 +#define CONFIG_DEF_TIMER11 10 +#define CONFIG_DEF_PROG0_INTA 11 +#define CONFIG_DEF_PROG0_INTB 11 +#define CONFIG_DEF_PROG1_INTA 11 +#define CONFIG_DEF_PROG1_INTB 11 +#define CONFIG_DEF_PROG2_INTA 11 +#define CONFIG_DEF_PROG2_INTB 11 +#define CONFIG_DEF_DMA1_WRRD0 8 +#define CONFIG_DEF_DMA1_WRRD1 8 +#define CONFIG_DEF_DMA2_WRRD0 9 +#define CONFIG_DEF_DMA2_WRRD1 9 +#define CONFIG_DEF_IMDMA_WRRD0 12 +#define CONFIG_DEF_IMDMA_WRRD1 12 +#define CONFIG_DEF_WATCH 13 +#define CONFIG_DEF_RESERVED_1 7 +#define CONFIG_DEF_RESERVED_2 7 +#define CONFIG_DEF_SUPPLE_0 7 +#define CONFIG_DEF_SUPPLE_1 7 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA1_ERROR_POS 4 +#define IRQ_DMA2_ERROR_POS 8 +#define IRQ_IMDMA_ERROR_POS 12 +#define IRQ_PPI0_ERROR_POS 16 +#define IRQ_PPI1_ERROR_POS 20 +#define IRQ_SPORT0_ERROR_POS 24 +#define IRQ_SPORT1_ERROR_POS 28 +/* IAR1 BIT FIELDS */ +#define IRQ_SPI_ERROR_POS 0 +#define IRQ_UART_ERROR_POS 4 +#define IRQ_RESERVED_ERROR_POS 8 +#define IRQ_DMA1_0_POS 12 +#define IRQ_DMA1_1_POS 16 +#define IRQ_DMA1_2_POS 20 +#define IRQ_DMA1_3_POS 24 +#define IRQ_DMA1_4_POS 28 +/* IAR2 BIT FIELDS */ +#define IRQ_DMA1_5_POS 0 +#define IRQ_DMA1_6_POS 4 +#define IRQ_DMA1_7_POS 8 +#define IRQ_DMA1_8_POS 12 +#define IRQ_DMA1_9_POS 16 +#define IRQ_DMA1_10_POS 20 +#define IRQ_DMA1_11_POS 24 +#define IRQ_DMA2_0_POS 28 +/* IAR3 BIT FIELDS */ +#define IRQ_DMA2_1_POS 0 +#define IRQ_DMA2_2_POS 4 +#define IRQ_DMA2_3_POS 8 +#define IRQ_DMA2_4_POS 12 +#define IRQ_DMA2_5_POS 16 +#define IRQ_DMA2_6_POS 20 +#define IRQ_DMA2_7_POS 24 +#define IRQ_DMA2_8_POS 28 +/* IAR4 BIT FIELDS */ +#define IRQ_DMA2_9_POS 0 +#define IRQ_DMA2_10_POS 4 +#define IRQ_DMA2_11_POS 8 +#define IRQ_TIMER0_POS 12 +#define IRQ_TIMER1_POS 16 +#define IRQ_TIMER2_POS 20 +#define IRQ_TIMER3_POS 24 +#define IRQ_TIMER4_POS 28 +/* IAR5 BIT FIELDS */ +#define IRQ_TIMER5_POS 0 +#define IRQ_TIMER6_POS 4 +#define IRQ_TIMER7_POS 8 +#define IRQ_TIMER8_POS 12 +#define IRQ_TIMER9_POS 16 +#define IRQ_TIMER10_POS 20 +#define IRQ_TIMER11_POS 24 +#define IRQ_PROG0_INTA_POS 28 +/* IAR6 BIT FIELDS */ +#define IRQ_PROG0_INTB_POS 0 +#define IRQ_PROG1_INTA_POS 4 +#define IRQ_PROG1_INTB_POS 8 +#define IRQ_PROG2_INTA_POS 12 +#define IRQ_PROG2_INTB_POS 16 +#define IRQ_DMA1_WRRD0_POS 20 +#define IRQ_DMA1_WRRD1_POS 24 +#define IRQ_DMA2_WRRD0_POS 28 +/* IAR7 BIT FIELDS */ +#define IRQ_DMA2_WRRD1_POS 0 +#define IRQ_IMDMA_WRRD0_POS 4 +#define IRQ_IMDMA_WRRD1_POS 8 +#define IRQ_WDTIMER_POS 12 +#define IRQ_RESERVED_1_POS 16 +#define IRQ_RESERVED_2_POS 20 +#define IRQ_SUPPLE_0_POS 24 +#define IRQ_SUPPLE_1_POS 28 + +#endif /* _BF561_IRQ_H_ */ diff --git a/arch/blackfin/mach-bf561/include/mach/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h new file mode 100644 index 00000000000..e163260bca1 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/mem_init.h @@ -0,0 +1,295 @@ +/* + * File: include/asm-blackfin/mach-bf561/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC8M32B2B5_7) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h new file mode 100644 index 00000000000..c26d8486cc4 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h @@ -0,0 +1,78 @@ +/* + * Memory MAP + * Common header file for blackfin BF561 of processors. + */ + +#ifndef _MEM_MAP_561_H_ +#define _MEM_MAP_561_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x800 + +/* Level 1 Memory */ + +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#else +#define BFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF561 processors */ + +#ifdef CONFIG_BF561 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0x4000 + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ +#endif + +/* Level 2 Memory */ +#define L2_START 0xFEB00000 +#define L2_LENGTH 0x20000 + +/* Scratch Pad Memory */ + +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 + +#endif /* _MEM_MAP_533_H_ */ diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h new file mode 100644 index 00000000000..a6ee8206efb --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -0,0 +1,89 @@ +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) +#define P_PPI0_FS3 (P_DONTCARE) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF47)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF46)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF45)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF44)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF43)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF42)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF41)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF40)) +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) +#define P_PPI0_D4 (P_DONTCARE) +#define P_PPI0_D5 (P_DONTCARE) +#define P_PPI0_D6 (P_DONTCARE) +#define P_PPI0_D7 (P_DONTCARE) +#define P_PPI1_CLK (P_DONTCARE) +#define P_PPI1_FS1 (P_DONTCARE) +#define P_PPI1_FS2 (P_DONTCARE) +#define P_PPI1_FS3 (P_DONTCARE) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PF39)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PF38)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PF37)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PF36)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PF35)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PF34)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PF33)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PF32)) +#define P_PPI1_D0 (P_DONTCARE) +#define P_PPI1_D1 (P_DONTCARE) +#define P_PPI1_D2 (P_DONTCARE) +#define P_PPI1_D3 (P_DONTCARE) +#define P_PPI1_D4 (P_DONTCARE) +#define P_PPI1_D5 (P_DONTCARE) +#define P_PPI1_D6 (P_DONTCARE) +#define P_PPI1_D7 (P_DONTCARE) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF31)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF30)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF29)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF28)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF27)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF26)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF25)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF24)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF23)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF22)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF21)) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF20)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF19)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF18)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF17)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF16)) +#define P_SPORT0_DRPRI (P_DONTCARE) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_TMR11 (P_DONTCARE) +#define P_TMR10 (P_DONTCARE) +#define P_TMR9 (P_DONTCARE) +#define P_TMR8 (P_DONTCARE) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 5986758b275..98133b968f7 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -28,8 +28,8 @@ */ #include <asm/fixed_code.h> -#include <asm/mach/anomaly.h> -#include <asm/mach-common/clocks.h> +#include <mach/anomaly.h> +#include <asm/clocks.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 838b0b2ce9a..ad5431e2cd0 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -6,7 +6,7 @@ #include <linux/linkage.h> #include <asm/blackfin.h> -#include <asm/mach/irq.h> +#include <mach/irq.h> #include <asm/dpmc.h> .section .l1.text diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 117c01c2c6b..847c172a99e 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -43,7 +43,7 @@ #include <asm/asm-offsets.h> #include <asm/trace.h> -#include <asm/mach-common/context.S> +#include <asm/context.S> #if defined(CONFIG_BFIN_SCRATCH_REG_RETN) # define EX_SCRATCH_REG RETN diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 7f752c87fe4..b27e59d3240 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -29,7 +29,7 @@ */ #include <asm/blackfin.h> -#include <asm/mach/irq.h> +#include <mach/irq.h> #include <linux/linkage.h> #include <asm/entry.h> #include <asm/asm-offsets.h> @@ -37,7 +37,7 @@ #include <asm/traps.h> #include <asm/thread_info.h> -#include <asm/mach-common/context.S> +#include <asm/context.S> .extern _ret_from_exception diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 62f8883a5c2..5fa536727c6 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -216,7 +216,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) wakeup |= KPADWE; break; #endif -#ifdef IRQ_CNT +#ifdef CONFIG_BF54x case IRQ_CNT: wakeup |= ROTWE; break; @@ -983,7 +983,7 @@ int __init init_arch_irq(void) local_irq_disable(); -#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537) +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) /* Clear EMAC Interrupt Status bits so we can demux it later */ bfin_write_EMAC_SYSTAT(-1); #endif diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 9d2be43ac3d..4f5e887a0d9 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -335,7 +335,7 @@ static int _sram_free(const void *addr, plast->size += pavail->size; kmem_cache_free(sram_piece_cache, pavail); } else { - pavail->next = plast; + pavail->next = plast->next; plast->next = pavail; plast = pavail; } @@ -379,7 +379,7 @@ EXPORT_SYMBOL(sram_free); void *l1_data_A_sram_alloc(size_t size) { - unsigned flags; + unsigned long flags; void *addr = NULL; /* add mutex operation */ @@ -402,7 +402,7 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc); int l1_data_A_sram_free(const void *addr) { - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -425,7 +425,7 @@ EXPORT_SYMBOL(l1_data_A_sram_free); void *l1_data_B_sram_alloc(size_t size) { #if L1_DATA_B_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -450,7 +450,7 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc); int l1_data_B_sram_free(const void *addr) { #if L1_DATA_B_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -504,7 +504,7 @@ EXPORT_SYMBOL(l1_data_sram_free); void *l1_inst_sram_alloc(size_t size) { #if L1_CODE_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -529,7 +529,7 @@ EXPORT_SYMBOL(l1_inst_sram_alloc); int l1_inst_sram_free(const void *addr) { #if L1_CODE_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -551,7 +551,7 @@ EXPORT_SYMBOL(l1_inst_sram_free); /* L1 Scratchpad memory allocate function */ void *l1sram_alloc(size_t size) { - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -569,7 +569,7 @@ void *l1sram_alloc(size_t size) /* L1 Scratchpad memory allocate function */ void *l1sram_alloc_max(size_t *psize) { - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -587,7 +587,7 @@ void *l1sram_alloc_max(size_t *psize) /* L1 Scratchpad memory free function */ int l1sram_free(const void *addr) { - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -605,7 +605,7 @@ int l1sram_free(const void *addr) void *l2_sram_alloc(size_t size) { #if L2_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -641,7 +641,7 @@ EXPORT_SYMBOL(l2_sram_zalloc); int l2_sram_free(const void *addr) { #if L2_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h index 5e0c1a6bce8..2acb6b6543c 100644 --- a/arch/ia64/include/asm/elf.h +++ b/arch/ia64/include/asm/elf.h @@ -266,4 +266,19 @@ do { \ } \ } while (0) +/* + * format for entries in the Global Offset Table + */ +struct got_entry { + uint64_t val; +}; + +/* + * Layout of the Function Descriptor + */ +struct fdesc { + uint64_t ip; + uint64_t gp; +}; + #endif /* _ASM_IA64_ELF_H */ diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h index 7286e4a9fe8..1a873b36a4a 100644 --- a/arch/ia64/include/asm/sections.h +++ b/arch/ia64/include/asm/sections.h @@ -6,9 +6,14 @@ * David Mosberger-Tang <davidm@hpl.hp.com> */ +#include <linux/elf.h> +#include <linux/uaccess.h> #include <asm-generic/sections.h> extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; +#ifdef CONFIG_SMP +extern char __cpu0_per_cpu[]; +#endif extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; extern char __start___rse_patchlist[], __end___rse_patchlist[]; extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; @@ -21,5 +26,17 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b extern char __start_unwind[], __end_unwind[]; extern char __start_ivt_text[], __end_ivt_text[]; +#undef dereference_function_descriptor +static inline void *dereference_function_descriptor(void *ptr) +{ + struct fdesc *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->ip, p)) + ptr = p; + return ptr; +} + + #endif /* _ASM_IA64_SECTIONS_H */ diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h index a0d214f4311..5efecf06c9a 100644 --- a/arch/ia64/include/asm/sn/bte.h +++ b/arch/ia64/include/asm/sn/bte.h @@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long); * until the transfer is complete. In order to get the asynch * version of bte_copy, you must perform this check yourself. */ -#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ - (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ - (dest & L1_CACHE_MASK)) ? \ - bte_unaligned_copy(src, dest, len, mode) : \ +#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ + (((len & (L1_CACHE_BYTES - 1)) || \ + (src & (L1_CACHE_BYTES - 1)) || \ + (dest & (L1_CACHE_BYTES - 1))) ? \ + bte_unaligned_copy(src, dest, len, mode) : \ bte_copy(src, dest, len, mode, NULL)) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index d45f215bc8f..51b75cea701 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource, if (md->attribute & EFI_MEMORY_WP) { name = "System ROM"; flags |= IORESOURCE_READONLY; - } else { + } else if (md->attribute == EFI_MEMORY_UC) + name = "Uncached RAM"; + else name = "System RAM"; - } break; case EFI_ACPI_MEMORY_NVS: diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 8bdea8eb62e..66e491d8baa 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -367,16 +367,17 @@ start_ap: ;; #else (isAP) br.few 2f - mov r20=r19 - sub r19=r19,r18 + movl r20=__cpu0_per_cpu ;; shr.u r18=r18,3 1: - ld8 r21=[r20],8;; - st8[r19]=r21,8 + ld8 r21=[r19],8;; + st8[r20]=r21,8 adds r18=-1,r18;; cmp4.lt p7,p6=0,r18 (p7) br.cond.dptk.few 1b + mov r19=r20 + ;; 2: #endif tpa r19=r19 diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 29aad349e0c..aaa7d901521 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -135,15 +135,6 @@ static const char *reloc_name[256] = { #undef N -struct got_entry { - uint64_t val; -}; - -struct fdesc { - uint64_t ip; - uint64_t gp; -}; - /* Opaque struct for insns, to protect against derefs. */ struct insn; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c27d5b2c182..de636b21567 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -616,7 +616,9 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); +#ifndef CONFIG_IA64_HP_SIM check_sal_cache_flush(); +#endif paging_init(); } diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index bcea81e432f..d8f05e504fb 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -741,16 +741,14 @@ int __cpu_disable(void) return -EBUSY; } - cpu_clear(cpu, cpu_online_map); - if (migrate_platform_irqs(cpu)) { cpu_set(cpu, cpu_online_map); return (-EBUSY); } remove_siblinginfo(cpu); - cpu_clear(cpu, cpu_online_map); fixup_irqs(); + cpu_clear(cpu, cpu_online_map); local_flush_tlb_all(); cpu_clear(cpu, cpu_callin_map); return 0; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index de71da811cd..10a7d47e851 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -215,9 +215,6 @@ SECTIONS /* Per-cpu data: */ percpu : { } :percpu . = ALIGN(PERCPU_PAGE_SIZE); -#ifdef CONFIG_SMP - . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ -#endif __phys_per_cpu_start = .; .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { @@ -233,6 +230,11 @@ SECTIONS data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) { +#ifdef CONFIG_SMP + . = ALIGN(PERCPU_PAGE_SIZE); + __cpu0_per_cpu = .; + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif DATA_DATA *(.data1) *(.gnu.linkonce.d*) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 7a37d06376b..cd0d1a7284b 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -38,6 +38,7 @@ #include <asm/cacheflush.h> #include <asm/div64.h> #include <asm/tlb.h> +#include <asm/elf.h> #include "misc.h" #include "vti.h" @@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; - -struct fdesc{ - unsigned long ip; - unsigned long gp; -}; - static void kvm_flush_icache(unsigned long start, unsigned long len) { int l; diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index e566ff43884..0ee085efbe2 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -163,7 +163,7 @@ per_cpu_init (void) * get_zeroed_page(). */ if (first_time) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; first_time=0; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 78026aabaa7..d8c5fcd89e5 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node) for_each_possible_early_cpu(cpu) { if (cpu == 0) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; __per_cpu_offset[cpu] = (char*)cpu0_data - __per_cpu_start; } else if (node == node_cpuid[cpu].nid) { diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 529462c0157..79165122501 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) entry = find_next_zero_bit(map, mapsize, last_entry); } - if (entry > mapsize) + if (entry > mapsize) { + kfree(ca_dmamap); goto map_return; + } for (i = 0; i < entries; i++) set_bit(entry + i, map); diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index a5f864c445b..f57113f1f89 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -216,10 +216,6 @@ config MEMORY_SIZE default "01000000" if PLAT_M32104UT default "00800000" if PLAT_OAKS32R -config NOHIGHMEM - bool - default y - config ARCH_DISCONTIGMEM_ENABLE bool "Internal RAM Support" depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104 @@ -410,11 +406,7 @@ config PCI_DIRECT source "drivers/pci/Kconfig" config ISA - bool "ISA support" - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have ISA, say Y, otherwise N. + bool source "drivers/pcmcia/Kconfig" diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index d4eaa2fd181..612d35b082a 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -143,7 +143,7 @@ ret_from_intr: and3 r4, r4, #0x8000 ; check BSM bit #endif beqz r4, resume_kernel -ENTRY(resume_userspace) +resume_userspace: DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index dab7436d7bb..40180778a5c 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -29,7 +29,6 @@ __INITDATA .global _end ENTRY(stext) ENTRY(_stext) -ENTRY(startup_32) /* Setup up the stack pointer */ LDIMM (r0, spi_stack_top) LDIMM (r1, spu_stack_top) diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index d0c5b0b7da2..2aeae467009 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -22,9 +22,6 @@ #include <linux/module.h> #include <asm/uaccess.h> -atomic_t irq_err_count; -atomic_t irq_mis_count; - /* * Generic, controller-independent functions: */ @@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); } return 0; } diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c index 16bcb189a38..22624b51d4d 100644 --- a/arch/m32r/kernel/m32r_ksyms.c +++ b/arch/m32r/kernel/m32r_ksyms.c @@ -14,6 +14,7 @@ #include <asm/delay.h> #include <asm/irq.h> #include <asm/tlbflush.h> +#include <asm/pgtable.h> /* platform dependent support */ EXPORT_SYMBOL(boot_cpu_data); @@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(_inb); EXPORT_SYMBOL(_inw); diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index a689e2978b6..5be4faaf5b1 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -35,8 +35,6 @@ #include <linux/err.h> -static int hlt_counter=0; - /* * Return saved PC of a blocked thread. */ @@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* * Powermanagement idle function, if any.. */ -void (*pm_idle)(void) = NULL; -EXPORT_SYMBOL(pm_idle); +static void (*pm_idle)(void) = NULL; void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - /* * We use this is we don't have any better * idle routine.. */ -void default_idle(void) +static void default_idle(void) { /* M32R_FIXME: Please use "cpu_sleep" mode. */ cpu_relax(); @@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu, return 0; } -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - /* M32R_FIXME */ - return 1; -} - asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, struct pt_regs regs) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 7577f971ea4..929e5c9d3ad 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -84,7 +84,7 @@ void smp_send_timer(void); void smp_ipi_timer_interrupt(struct pt_regs *); void smp_local_timer_interrupt(void); -void send_IPI_allbutself(int, int); +static void send_IPI_allbutself(int, int); static void send_IPI_mask(cpumask_t, int, int); unsigned long send_IPI_mask_phys(cpumask_t, int, int); @@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void) * ---------- --- -------------------------------------------------------- * *==========================================================================*/ -void send_IPI_allbutself(int ipi_num, int try) +static void send_IPI_allbutself(int ipi_num, int try) { cpumask_t cpumask; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 994cc155635..6ea017727cc 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -34,7 +34,6 @@ #include <asm/hw_irq.h> #ifdef CONFIG_SMP -extern void send_IPI_allbutself(int, int); extern void smp_local_timer_interrupt(void); #endif @@ -188,7 +187,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -irqreturn_t timer_interrupt(int irq, void *dev_id) +static irqreturn_t timer_interrupt(int irq, void *dev_id) { #ifndef CONFIG_SMP profile_tick(CPU_PROFILING); @@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -struct irqaction irq0 = { +static struct irqaction irq0 = { .handler = timer_interrupt, .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 46159a4e644..03b14e55cd8 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -61,7 +61,7 @@ extern unsigned long eit_vector[]; ((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \ + 0xff000000UL -void set_eit_vector_entries(void) +static void set_eit_vector_entries(void) { extern void default_eit_handler(void); extern void system_call(void); @@ -121,9 +121,9 @@ void __init trap_init(void) cpu_init(); } -int kstack_depth_to_print = 24; +static int kstack_depth_to_print = 24; -void show_trace(struct task_struct *task, unsigned long *stack) +static void show_trace(struct task_struct *task, unsigned long *stack) { unsigned long addr; @@ -224,7 +224,7 @@ bad: printk("\n"); } -DEFINE_SPINLOCK(die_lock); +static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c index 59bfc34e0d9..ced549be80f 100644 --- a/arch/m32r/lib/delay.c +++ b/arch/m32r/lib/delay.c @@ -6,6 +6,7 @@ */ #include <linux/param.h> +#include <linux/module.h> #ifdef CONFIG_SMP #include <linux/sched.h> #include <asm/current.h> @@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs) { __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } +EXPORT_SYMBOL(__ndelay); diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 8a2a53b3361..bb959fbab2d 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -580,13 +580,15 @@ int atari_keyb_init(void) do { /* reset IKBD ACIA */ acia.key_ctrl = ACIA_RESET | - (atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_IKBD) ? + ACIA_RHTID : 0); (void)acia.key_ctrl; (void)acia.key_data; /* reset MIDI ACIA */ acia.mid_ctrl = ACIA_RESET | - (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_MIDI) ? + ACIA_RHTID : 0); (void)acia.mid_ctrl; (void)acia.mid_data; @@ -599,7 +601,8 @@ int atari_keyb_init(void) ACIA_RHTID : ACIA_RLTID); acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | - (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_MIDI) ? + ACIA_RHTID : 0); /* make sure the interrupt line is up */ } while ((mfp.par_dt_reg & 0x10) == 0); diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 8e2a0f5faf5..8bd61a640fc 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:00 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ZORRO_NAMES=y - -# -# Networking -# CONFIG_NET=y # @@ -183,6 +185,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -844,10 +851,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND=m @@ -861,6 +864,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -899,6 +903,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index e2d511e2a1d..c41b854c028 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:01 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -178,6 +180,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -532,7 +536,6 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_APOLLO_ELPLUS=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -738,10 +745,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -753,6 +756,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -789,6 +793,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -860,18 +866,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 6e20d656ada..654c5acb9e8 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:02 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -179,6 +181,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_FALCON_IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -782,10 +789,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND=m @@ -799,6 +802,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -806,11 +810,8 @@ CONFIG_HIDRAW=y # Character devices # CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_SCC=y -CONFIG_ATARI_SCC_DMA=y CONFIG_ATARI_MIDI=m CONFIG_ATARI_DSP56K=m -# CONFIG_SERIAL_CONSOLE is not set # # File systems @@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -840,6 +843,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index a0a9b30bb50..2e44af0fe54 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:03 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -723,6 +727,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -759,6 +764,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -830,18 +837,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=m # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 6778041de26..3570fc89b08 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:04 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -179,6 +181,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -747,10 +755,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -762,6 +766,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -796,6 +801,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -867,18 +874,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 7cd37574034..db6e8822594 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:06 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_MAC_IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_MACINTOSH_DRIVERS=y @@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -799,6 +802,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -836,6 +840,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 0747fa3984d..1a806102b99 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:07 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ZORRO_NAMES=y - -# -# Networking -# CONFIG_NET=y # @@ -190,6 +192,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_BLK_DEV_Q40IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_MACINTOSH_DRIVERS=y @@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -632,7 +635,6 @@ CONFIG_A2065=m CONFIG_HYDRA=m CONFIG_ZORRO8390=m CONFIG_APNE=m -CONFIG_APOLLO_ELPLUS=y CONFIG_MAC8390=y CONFIG_MAC89x0=m CONFIG_MACSONIC=m @@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND_PAULA=m @@ -942,6 +944,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -949,8 +952,6 @@ CONFIG_HIDRAW=y # Character devices # CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_SCC=y -CONFIG_ATARI_SCC_DMA=y CONFIG_ATARI_MIDI=m CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y @@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -992,6 +995,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e7a8246840b..cacb5aef6a3 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:08 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -722,6 +726,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -758,6 +763,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -829,18 +836,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index ab536eb172b..a183e25e348 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:09 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -723,6 +727,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -760,6 +765,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -831,18 +838,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index e05be687b50..72eaff0776b 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:10 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_Q40IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -792,10 +799,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_DMASOUND=m @@ -809,6 +812,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -843,6 +847,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 296340d2b31..cb62b96d766 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:11 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -166,6 +168,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -727,10 +732,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -776,6 +777,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -847,18 +850,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 8d3a416c92b..04b4363a705 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:12 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -177,6 +179,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -737,10 +745,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -752,6 +756,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -786,6 +791,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -857,18 +864,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4da736e2533..c930b8ceb41 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" @@ -1886,6 +1868,15 @@ config STACKTRACE_SUPPORT source "init/Kconfig" +config PROBE_INITRD_HEADER + bool "Probe initrd header created by addinitrd" + depends on BLK_DEV_INITRD + help + Probe initrd header at the last page of kernel image. + Say Y here if you are using arch/mips/boot/addinitrd.c to + add initrd or initramfs image to the kernel image. + Otherwise, say N. + menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index b485d94ce8a..e660ddd611c 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio) static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->dir = (0x01 << gpio) | (value << gpio); + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } @@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio) static int au1xxx_gpio1_direction_output(unsigned gpio, int value) { gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); return 0; } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 706f9397479..25775cb5400 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 24a2d907aa0..4a4c59f2737 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -12,6 +12,14 @@ #include <asm/smtc_ipi.h> #include <asm/time.h> +#include <asm/cevt-r4k.h> + +/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ + +#ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, struct clock_event_device *evt) @@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta, unsigned int cnt; int res; -#ifdef CONFIG_MIPS_MT_SMTC - { - unsigned long flags, vpflags; - local_irq_save(flags); - vpflags = dvpe(); -#endif cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; -#ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); - local_irq_restore(flags); - } -#endif return res; } -static void mips_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +#endif /* CONFIG_MIPS_MT_SMTC */ + +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { /* Nothing to do ... */ } -static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); -static int cp0_timer_irq_installed; +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; -/* - * Timer ack for an R4k-compatible timer of a known frequency. - */ -static void c0_timer_ack(void) -{ - write_c0_compare(read_c0_compare()); -} +#ifndef CONFIG_MIPS_MT_SMTC -/* - * Possibly handle a performance counter interrupt. - * Return true if the timer interrupt should not be checked - */ -static inline int handle_perf_irq(int r2) -{ - /* - * The performance counter overflow interrupt may be shared with the - * timer interrupt (cp0_perfcount_irq < 0). If it is and a - * performance counter has overflowed (perf_irq() == IRQ_HANDLED) - * and we can't reliably determine if a counter interrupt has also - * happened (!r2) then don't check for a timer interrupt. - */ - return (cp0_perfcount_irq < 0) && - perf_irq() == IRQ_HANDLED && - !r2; -} - -static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) { const int r2 = cpu_has_mips_r2; struct clock_event_device *cd; @@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) * interrupt. Being the paranoiacs we are we check anyway. */ if (!r2 || (read_c0_cause() & (1 << 30))) { - c0_timer_ack(); -#ifdef CONFIG_MIPS_MT_SMTC - if (cpu_data[cpu].vpe_id) - goto out; - cpu = 0; -#endif + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); } @@ -107,65 +78,16 @@ out: return IRQ_HANDLED; } -static struct irqaction c0_compare_irqaction = { +#endif /* Not CONFIG_MIPS_MT_SMTC */ + +struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, -#ifdef CONFIG_MIPS_MT_SMTC - .flags = IRQF_DISABLED, -#else .flags = IRQF_DISABLED | IRQF_PERCPU, -#endif .name = "timer", }; -#ifdef CONFIG_MIPS_MT_SMTC -DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); - -static void smtc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void mips_broadcast(cpumask_t mask) -{ - unsigned int cpu; - - for_each_cpu_mask(cpu, mask) - smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); -} - -static void setup_smtc_dummy_clockevent_device(void) -{ - //uint64_t mips_freq = mips_hpt_^frequency; - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - - cd->name = "SMTC"; - cd->features = CLOCK_EVT_FEAT_DUMMY; - - /* Calculate the min / max delta */ - cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); - cd->shift = 0; //32; - cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd); - - cd->rating = 200; - cd->irq = 17; //-1; -// if (cpu) -// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu); -// else - cd->cpumask = cpumask_of_cpu(cpu); - - cd->set_mode = smtc_set_mode; - - cd->broadcast = mips_broadcast; - - clockevents_register_device(cd); -} -#endif - -static void mips_event_handler(struct clock_event_device *dev) +void mips_event_handler(struct clock_event_device *dev) { } @@ -177,7 +99,23 @@ static int c0_compare_int_pending(void) return (read_c0_cause() >> cp0_compare_irq) & 0x100; } -static int c0_compare_int_usable(void) +/* + * Compare interrupt can be routed and latched outside the core, + * so a single execution hazard barrier may not be enough to give + * it time to clear as seen in the Cause register. 4 time the + * pipeline depth seems reasonably conservative, and empirically + * works better in configurations with high CPU/bus clock ratios. + */ + +#define compare_change_hazard() \ + do { \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + } while (0) + +int c0_compare_int_usable(void) { unsigned int delta; unsigned int cnt; @@ -187,7 +125,7 @@ static int c0_compare_int_usable(void) */ if (c0_compare_int_pending()) { write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; } @@ -196,7 +134,7 @@ static int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - irq_disable_hazard(); + compare_change_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -205,11 +143,12 @@ static int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ + compare_change_hazard(); if (!c0_compare_int_pending()) return 0; write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; @@ -219,6 +158,8 @@ static int c0_compare_int_usable(void) return 1; } +#ifndef CONFIG_MIPS_MT_SMTC + int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; @@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; -#ifdef CONFIG_MIPS_MT_SMTC - setup_smtc_dummy_clockevent_device(); - - /* - * On SMTC we only register VPE0's compare interrupt as clockevent - * device. - */ - if (cpu) - return 0; -#endif - if (!c0_compare_int_usable()) return -ENXIO; @@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void) cd->rating = 300; cd->irq = irq; -#ifdef CONFIG_MIPS_MT_SMTC - cd->cpumask = CPU_MASK_ALL; -#else cd->cpumask = cpumask_of_cpu(cpu); -#endif cd->set_next_event = mips_next_event; - cd->set_mode = mips_set_mode; + cd->set_mode = mips_set_clock_mode; cd->event_handler = mips_event_handler; clockevents_register_device(cd); @@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void) cp0_timer_irq_installed = 1; -#ifdef CONFIG_MIPS_MT_SMTC -#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq) - setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT); -#else setup_irq(irq, &c0_compare_irqaction); -#endif return 0; } + +#endif /* Not CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c new file mode 100644 index 00000000000..5162fe4b595 --- /dev/null +++ b/arch/mips/kernel/cevt-smtc.c @@ -0,0 +1,321 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> + +#include <asm/smtc_ipi.h> +#include <asm/time.h> +#include <asm/cevt-r4k.h> + +/* + * Variant clock event timer support for SMTC on MIPS 34K, 1004K + * or other MIPS MT cores. + * + * Notes on SMTC Support: + * + * SMTC has multiple microthread TCs pretending to be Linux CPUs. + * But there's only one Count/Compare pair per VPE, and Compare + * interrupts are taken opportunisitically by available TCs + * bound to the VPE with the Count register. The new timer + * framework provides for global broadcasts, but we really + * want VPE-level multicasts for best behavior. So instead + * of invoking the high-level clock-event broadcast code, + * this version of SMTC support uses the historical SMTC + * multicast mechanisms "under the hood", appearing to the + * generic clock layer as if the interrupts are per-CPU. + * + * The approach taken here is to maintain a set of NR_CPUS + * virtual timers, and track which "CPU" needs to be alerted + * at each event. + * + * It's unlikely that we'll see a MIPS MT core with more than + * 2 VPEs, but we *know* that we won't need to handle more + * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements + * is always going to be overkill, but always going to be enough. + */ + +unsigned long smtc_nexttime[NR_CPUS][NR_CPUS]; +static int smtc_nextinvpe[NR_CPUS]; + +/* + * Timestamps stored are absolute values to be programmed + * into Count register. Valid timestamps will never be zero. + * If a Zero Count value is actually calculated, it is converted + * to be a 1, which will introduce 1 or two CPU cycles of error + * roughly once every four billion events, which at 1000 HZ means + * about once every 50 days. If that's actually a problem, one + * could alternate squashing 0 to 1 and to -1. + */ + +#define MAKEVALID(x) (((x) == 0L) ? 1L : (x)) +#define ISVALID(x) ((x) != 0L) + +/* + * Time comparison is subtle, as it's really truncated + * modular arithmetic. + */ + +#define IS_SOONER(a, b, reference) \ + (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference))) + +/* + * CATCHUP_INCREMENT, used when the function falls behind the counter. + * Could be an increasing function instead of a constant; + */ + +#define CATCHUP_INCREMENT 64 + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int mtflags; + unsigned long timestamp, reference, previous; + unsigned long nextcomp = 0L; + int vpe = current_cpu_data.vpe_id; + int cpu = smp_processor_id(); + local_irq_save(flags); + mtflags = dmt(); + + /* + * Maintain the per-TC virtual timer + * and program the per-VPE shared Count register + * as appropriate here... + */ + reference = (unsigned long)read_c0_count(); + timestamp = MAKEVALID(reference + delta); + /* + * To really model the clock, we have to catch the case + * where the current next-in-VPE timestamp is the old + * timestamp for the calling CPE, but the new value is + * in fact later. In that case, we have to do a full + * scan and discover the new next-in-VPE CPU id and + * timestamp. + */ + previous = smtc_nexttime[vpe][cpu]; + if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous) + && IS_SOONER(previous, timestamp, reference)) { + int i; + int soonest = cpu; + + /* + * Update timestamp array here, so that new + * value gets considered along with those of + * other virtual CPUs on the VPE. + */ + smtc_nexttime[vpe][cpu] = timestamp; + for_each_online_cpu(i) { + if (ISVALID(smtc_nexttime[vpe][i]) + && IS_SOONER(smtc_nexttime[vpe][i], + smtc_nexttime[vpe][soonest], reference)) { + soonest = i; + } + } + smtc_nextinvpe[vpe] = soonest; + nextcomp = smtc_nexttime[vpe][soonest]; + /* + * Otherwise, we don't have to process the whole array rank, + * we just have to see if the event horizon has gotten closer. + */ + } else { + if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) || + IS_SOONER(timestamp, + smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) { + smtc_nextinvpe[vpe] = cpu; + nextcomp = timestamp; + } + /* + * Since next-in-VPE may me the same as the executing + * virtual CPU, we update the array *after* checking + * its value. + */ + smtc_nexttime[vpe][cpu] = timestamp; + } + + /* + * It may be that, in fact, we don't need to update Compare, + * but if we do, we want to make sure we didn't fall into + * a crack just behind Count. + */ + if (ISVALID(nextcomp)) { + write_c0_compare(nextcomp); + ehb(); + /* + * We never return an error, we just make sure + * that we trigger the handlers as quickly as + * we can if we fell behind. + */ + while ((nextcomp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) { + nextcomp += CATCHUP_INCREMENT; + write_c0_compare(nextcomp); + ehb(); + } + } + emt(mtflags); + local_irq_restore(flags); + return 0; +} + + +void smtc_distribute_timer(int vpe) +{ + unsigned long flags; + unsigned int mtflags; + int cpu; + struct clock_event_device *cd; + unsigned long nextstamp = 0L; + unsigned long reference; + + +repeat: + for_each_online_cpu(cpu) { + /* + * Find virtual CPUs within the current VPE who have + * unserviced timer requests whose time is now past. + */ + local_irq_save(flags); + mtflags = dmt(); + if (cpu_data[cpu].vpe_id == vpe && + ISVALID(smtc_nexttime[vpe][cpu])) { + reference = (unsigned long)read_c0_count(); + if ((smtc_nexttime[vpe][cpu] - reference) + > (unsigned long)LONG_MAX) { + smtc_nexttime[vpe][cpu] = 0L; + emt(mtflags); + local_irq_restore(flags); + /* + * We don't send IPIs to ourself. + */ + if (cpu != smp_processor_id()) { + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } else { + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + } + } else { + /* Local to VPE but Valid Time not yet reached. */ + if (!ISVALID(nextstamp) || + IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp, + reference)) { + smtc_nextinvpe[vpe] = cpu; + nextstamp = smtc_nexttime[vpe][cpu]; + } + emt(mtflags); + local_irq_restore(flags); + } + } else { + emt(mtflags); + local_irq_restore(flags); + + } + } + /* Reprogram for interrupt at next soonest timestamp for VPE */ + if (ISVALID(nextstamp)) { + write_c0_compare(nextstamp); + ehb(); + if ((nextstamp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) + goto repeat; + } +} + + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + + /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */ + handle_perf_irq(1); + + if (read_c0_cause() & (1 << 30)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + smtc_distribute_timer(cpu_data[cpu].vpe_id); + } + return IRQ_HANDLED; +} + + +int __cpuinit mips_clockevent_init(void) +{ + uint64_t mips_freq = mips_hpt_frequency; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq; + int i; + int j; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + if (cpu == 0) { + for (i = 0; i < num_possible_cpus(); i++) { + smtc_nextinvpe[i] = 0; + for (j = 0; j < num_possible_cpus(); j++) + smtc_nexttime[i][j] = 0L; + } + /* + * SMTC also can't have the usablility test + * run by secondary TCs once Compare is in use. + */ + if (!c0_compare_int_usable()) + return -ENXIO; + } + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of it's liking. + */ + irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + if (get_c0_compare_int) + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); + cd->shift = 32; + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = mips_next_event; + cd->set_mode = mips_set_clock_mode; + cd->event_handler = mips_event_handler; + + clockevents_register_device(cd); + + /* + * On SMTC we only want to do the data structure + * initialization and IRQ setup once. + */ + if (cpu) + return 0; + /* + * And we need the hwmask associated with the c0_compare + * vector to be initialized. + */ + irq_hwmask[irq] = (0x100 << cp0_compare_irq); + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); + + return 0; +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 335a6ae3d59..e621fda8ab3 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -45,18 +45,7 @@ static void r39xx_wait(void) local_irq_enable(); } -/* - * There is a race when WAIT instruction executed with interrupt - * enabled. - * But it is implementation-dependent wheter the pipelie restarts when - * a non-enabled interrupt is requested. - */ -static void r4k_wait(void) -{ - __asm__(" .set mips3 \n" - " wait \n" - " .set mips0 \n"); -} +extern void r4k_wait(void); /* * This variant is preferable as it allows testing need_resched and going to @@ -65,14 +54,18 @@ static void r4k_wait(void) * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes * using this version a gamble. */ -static void r4k_wait_irqoff(void) +void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set mips3 \n" + __asm__(" .set push \n" + " .set mips3 \n" " wait \n" - " .set mips0 \n"); + " .set pop \n"); local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); + return; } /* @@ -128,7 +121,7 @@ static int __init wait_disable(char *s) __setup("nowait", wait_disable); -static inline void check_wait(void) +void __init check_wait(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -242,7 +235,6 @@ static inline void check_errata(void) void __init check_bugs32(void) { - check_wait(); check_errata(); } diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e29598ae939..ffa331029e0 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,11 +79,6 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC -/* Detect and execute deferred IPI "interrupts" */ - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - jal deferred_smtc_ipi - LONG_S s0, TI_REGS($28) #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS @@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ +/* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index c6ada98ee04..01dcbe38fa0 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -20,6 +20,7 @@ #include <asm/stackframe.h> #include <asm/war.h> #include <asm/page.h> +#include <asm/thread_info.h> #define PANIC_PIC(msg) \ .set push; \ @@ -126,7 +127,42 @@ handle_vcei: __FINIT + .align 5 /* 32 byte rollback region */ +LEAF(r4k_wait) + .set push + .set noreorder + /* start of rollback region */ + LONG_L t0, TI_FLAGS($28) + nop + andi t0, _TIF_NEED_RESCHED + bnez t0, 1f + nop + nop + nop + .set mips3 + wait + /* end of rollback region (the region size must be power of two) */ + .set pop +1: + jr ra + END(r4k_wait) + + .macro BUILD_ROLLBACK_PROLOGUE handler + FEXPORT(rollback_\handler) + .set push + .set noat + MFC0 k0, CP0_EPC + PTR_LA k1, r4k_wait + ori k0, 0x1f /* 32 byte rollback region */ + xori k0, 0x1f + bne k0, k1, 9f + MTC0 k0, CP0_EPC +9: + .set pop + .endm + .align 5 +BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) #ifdef CONFIG_TRACE_IRQFLAGS /* @@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp) * This prototype is copied to ebase + n*IntCtl.VS and patched * to invoke the handler */ +BUILD_ROLLBACK_PROLOGUE except_vec_vi NESTED(except_vec_vi, 0, sp) SAVE_SOME SAVE_AT @@ -245,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp) and t0, a0, t1 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT - or t0, t0, t2 - mtc0 t0, CP0_TCCONTEXT + or t2, t0, t2 + mtc0 t2, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 8f6d58ede33..6e152c80cd4 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); if (remcom_in_buffer[0] == 's') - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, cpu); + atomic_set(&kgdb_cpu_doing_single_step, cpu); return 0; } diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index df4d3f2f740..dc9eb72ed9d 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh); /* * FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 +#define FPUSEFACTOR 2000 static __init int mt_fp_affinity_init(void) { diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index b16facd9ea8..22fc19bbe87 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -55,7 +55,7 @@ void __noreturn cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(1); while (!need_resched()) { -#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG +#ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); @@ -145,17 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, */ p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1); childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); - clear_tsk_thread_flag(p, TIF_USEDFPU); -#ifdef CONFIG_MIPS_MT_FPAFF +#ifdef CONFIG_MIPS_MT_SMTC /* - * FPU affinity support is cleaner if we track the - * user-visible CPU affinity from the very beginning. - * The generic cpus_allowed mask will already have - * been copied from the parent before copy_thread - * is invoked. + * SMTC restores TCStatus after Status, and the CU bits + * are aliased there. */ - p->thread.user_cpus_allowed = p->cpus_allowed; + childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1); +#endif + clear_tsk_thread_flag(p, TIF_USEDFPU); + +#ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); #endif /* CONFIG_MIPS_MT_FPAFF */ if (clone_flags & CLONE_SETTLS) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 35234b92b9a..96ffc9c6d19 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC - unsigned int irqflags; + unsigned long irqflags; unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2aae76bce29..16f8edfe5cd 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early); static unsigned long __init init_initrd(void) { unsigned long end; - u32 *initrd_header; /* * Board specific code or command line parser should have * already set up initrd_start and initrd_end. In these cases * perfom sanity checks and use them if all looks good. */ - if (initrd_start && initrd_end > initrd_start) - goto sanitize; + if (!initrd_start || initrd_end <= initrd_start) { +#ifdef CONFIG_PROBE_INITRD_HEADER + u32 *initrd_header; - /* - * See if initrd has been added to the kernel image by - * arch/mips/boot/addinitrd.c. In that case a header is - * prepended to initrd and is made up by 8 bytes. The fisrt - * word is a magic number and the second one is the size of - * initrd. Initrd start must be page aligned in any cases. - */ - initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; - if (initrd_header[0] != 0x494E5244) + /* + * See if initrd has been added to the kernel image by + * arch/mips/boot/addinitrd.c. In that case a header is + * prepended to initrd and is made up by 8 bytes. The first + * word is a magic number and the second one is the size of + * initrd. Initrd start must be page aligned in any cases. + */ + initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; + if (initrd_header[0] != 0x494E5244) + goto disable; + initrd_start = (unsigned long)(initrd_header + 2); + initrd_end = initrd_start + initrd_header[1]; +#else goto disable; - initrd_start = (unsigned long)(initrd_header + 2); - initrd_end = initrd_start + initrd_header[1]; +#endif + } -sanitize: if (initrd_start & ~PAGE_MASK) { pr_err("initrd start must be page aligned\n"); goto disable; diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a516286532a..897fb2b4751 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1,4 +1,21 @@ -/* Copyright (C) 2004 Mips Technologies, Inc */ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2004 Mips Technologies, Inc + * Copyright (C) 2008 Kevin D. Kissell + */ #include <linux/clockchips.h> #include <linux/kernel.h> @@ -21,7 +38,6 @@ #include <asm/time.h> #include <asm/addrspace.h> #include <asm/smtc.h> -#include <asm/smtc_ipi.h> #include <asm/smtc_proc.h> /* @@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; -/* - * Clock interrupt "latch" buffers, per "CPU" - */ - -static atomic_t ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate @@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -static struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; @@ -282,7 +293,7 @@ static void smtc_configure_tlb(void) * phys_cpu_present_map and the logical/physical mappings. */ -int __init mipsmt_build_cpu_map(int start_cpu_slot) +int __init smtc_build_cpu_map(int start_cpu_slot) { int i, ntcs; @@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A); - write_tc_c0_tccontext(0); + /* + * TCContext gets an offset from the base of the IPIQ array + * to be used in low-level code to detect the presence of + * an active IPI queue + */ + write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); /* In general, all TCs should have the same cpu_data indications */ @@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; + /* Multi-core SMTC hasn't been tested, but be prepared */ + cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff; } +/* + * Tweak to get Count registes in as close a sync as possible. + * Value seems good for 34K-class cores. + */ + +#define CP0_SKEW 8 -void mipsmt_prepare_cpus(void) +void smtc_prepare_cpus(int cpus) { int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu; unsigned long flags; @@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; - atomic_set(&ipi_timer_latch[i], 0); } /* cpu_data index starts at zero */ cpu = 0; cpu_data[cpu].vpe_id = 0; cpu_data[cpu].tc_id = 0; + cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff; cpu++; /* Report on boot-time options */ @@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); - write_vpe_c0_count(read_c0_count()); + write_vpe_c0_count(read_c0_count() + CP0_SKEW); + ehb(); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); @@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void) void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; - long flags; + unsigned long flags; int mtflags; LOCK_MT_PRA(); @@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - /* - * Start timer on secondary VPEs if necessary. - * plat_timer_setup has already have been invoked by init/main - * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that - * SMTC init code assigns TCs consdecutively and in ascending order - * to across available VPEs. - */ - if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && - ((read_c0_tcbind() & TCBIND_CURVPE) - != cpu_data[smp_processor_id() - 1].vpe_id)){ - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - } - local_irq_enable(); } void smtc_smp_finish(void) { + int cpu = smp_processor_id(); + + /* + * Lowest-numbered CPU per VPE starts a clock tick. + * Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and + * in ascending order across available VPEs. + */ + if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } @@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; - long flags; + unsigned long flags; int mtflags; + unsigned long tcrestart; + extern void r4k_wait_irqoff(void), __pastwait(void); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); @@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); @@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if ((tcstatus & TCSTATUS_IXMT) != 0) { /* - * Spin-waiting here can deadlock, - * so we queue the message for the target TC. + * If we're in the the irq-off version of the wait + * loop, we need to force exit from the wait and + * do a direct post of the IPI. + */ + if (cpu_wait == r4k_wait_irqoff) { + tcrestart = read_tc_c0_tcrestart(); + if (tcrestart >= (unsigned long)r4k_wait_irqoff + && tcrestart < (unsigned long)__pastwait) { + write_tc_c0_tcrestart(__pastwait); + tcstatus &= ~TCSTATUS_IXMT; + write_tc_c0_tcstatus(tcstatus); + goto postdirect; + } + } + /* + * Otherwise we queue the message for the target TC + * to pick up when he does a local_irq_restore() */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); - /* Try to reduce redundant timer interrupt messages */ - if (type == SMTC_CLOCK_TICK) { - if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ - smtc_ipi_nq(&freeIPIq, pipi); - return; - } - } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); +postdirect: post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); @@ -883,7 +913,7 @@ static void ipi_call_interrupt(void) smp_call_function_interrupt(); } -DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void ipi_decode(struct smtc_ipi *pipi) { @@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int ticks; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - ticks = atomic_read(&ipi_timer_latch[cpu]); - atomic_sub(ticks, &ipi_timer_latch[cpu]); - while (ticks) { - cd->event_handler(cd); - ticks--; - } + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); irq_exit(); break; @@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi) } } +/* + * Similar to smtc_ipi_replay(), but invoked from context restore, + * so it reuses the current exception frame rather than set up a + * new one with self_ipi. + */ + void deferred_smtc_ipi(void) { - struct smtc_ipi *pipi; - unsigned long flags; -/* DEBUG */ - int q = smp_processor_id(); + int cpu = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. + * If irq_disabled when this was called, then any IPIs queued + * after we test last will be taken on the next irq_enable/restore. + * If interrupts were enabled, then any IPIs added after the + * last test will be taken directly. */ - if (IPIQ[q].head != NULL) { - while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { - /* ipi_decode() should be called with interrupts off */ - local_irq_save(flags); + + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It may be possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + if (pipi != NULL) ipi_decode(pipi); - local_irq_restore(flags); - } + /* + * The use of the __raw_local restore isn't + * as obviously necessary here as in smtc_ipi_replay(), + * but it's more efficient, given that we're already + * running down the IPI queue. + */ + __raw_local_irq_restore(flags); } } @@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) struct smtc_ipi *pipi; unsigned long tcstatus; int sent; - long flags; + unsigned long flags; unsigned int mtflags; unsigned int vpflags; @@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) /* * SMTC-specific hacks invoked from elsewhere in the kernel. - * - * smtc_ipi_replay is called from raw_local_irq_restore which is only ever - * called with interrupts disabled. We do rely on interrupts being disabled - * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would - * result in a recursive call to raw_local_irq_restore(). */ -static void __smtc_ipi_replay(void) + /* + * smtc_ipi_replay is called from raw_local_irq_restore + */ + +void smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * and not a pseudo-pseudo interrupt. The important thing + * is to do the last check for queued message *after* the + * re-enabling of interrupts. */ - if (IPIQ[cpu].depth > 0) { - while (1) { - struct smtc_ipi_q *q = &IPIQ[cpu]; - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - spin_lock(&q->lock); - pipi = __smtc_ipi_dq(q); - spin_unlock(&q->lock); - if (!pipi) - break; + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It's just possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + /* + ** But use a raw restore here to avoid recursion. + */ + __raw_local_irq_restore(flags); + if (pipi) { self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } -void smtc_ipi_replay(void) -{ - raw_local_irq_disable(); - __smtc_ipi_replay(); -} - EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) @@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void) } } - /* - * Now that we limit outstanding timer IPIs, check for hung TC - */ - for (tc = 0; tc < NR_CPUS; tc++) { - /* Don't check ourself - we'll dequeue IPIs just below */ - if ((tc != smp_processor_id()) && - atomic_read(&ipi_timer_latch[tc]) > timerq_limit) { - if (clock_hang_reported[tc] == 0) { - pdb_msg += sprintf(pdb_msg, - "TC %d looks hung with timer latch at %d\n", - tc, atomic_read(&ipi_timer_latch[tc])); - clock_hang_reported[tc]++; - } - } - } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ - /* - * Replay any accumulated deferred IPIs. If "Instant Replay" - * is in use, there should never be any. - */ -#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY - { - unsigned long flags; - - local_irq_save(flags); - __smtc_ipi_replay(); - local_irq_restore(flags); - } -#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + smtc_ipi_replay(); } void smtc_soft_dump(void) @@ -1242,10 +1260,6 @@ void smtc_soft_dump(void) printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); - printk("Timer IPI Backlogs:\n"); - for (i=0; i < NR_CPUS; i++) { - printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i])); - } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 426cced1e9d..b602ac6eb47 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -46,6 +46,9 @@ #include <asm/types.h> #include <asm/stacktrace.h> +extern void check_wait(void); +extern asmlinkage void r4k_wait(void); +extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); @@ -373,8 +376,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs) do_exit(SIGSEGV); } -extern const struct exception_table_entry __start___dbe_table[]; -extern const struct exception_table_entry __stop___dbe_table[]; +extern struct exception_table_entry __start___dbe_table[]; +extern struct exception_table_entry __stop___dbe_table[]; __asm__( " .section __dbe_table, \"a\"\n" @@ -822,8 +825,10 @@ static void mt_ase_fp_affinity(void) if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { cpumask_t tmask; - cpus_and(tmask, current->thread.user_cpus_allowed, - mt_fpu_cpumask); + current->thread.user_cpus_allowed + = current->cpus_allowed; + cpus_and(tmask, current->cpus_allowed, + mt_fpu_cpumask); set_cpus_allowed(current, tmask); set_thread_flag(TIF_FPUBOUND); } @@ -1200,7 +1205,7 @@ void *set_except_vector(int n, void *addr) if (n == 0 && cpu_has_divec) { *(u32 *)(ebase + 0x200) = 0x08000000 | (0x03ffffff & (handler >> 2)); - flush_icache_range(ebase + 0x200, ebase + 0x204); + local_flush_icache_range(ebase + 0x200, ebase + 0x204); } return (void *)old_handler; } @@ -1251,6 +1256,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; + extern char rollback_except_vec_vi; + char *vec_start = (cpu_wait == r4k_wait) ? + &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* * We need to provide the SMTC vectored interrupt handler @@ -1258,11 +1266,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) * Status.IM bit to be masked before going there. */ extern char except_vec_vi_mori; - const int mori_offset = &except_vec_vi_mori - &except_vec_vi; + const int mori_offset = &except_vec_vi_mori - vec_start; #endif /* CONFIG_MIPS_MT_SMTC */ - const int handler_len = &except_vec_vi_end - &except_vec_vi; - const int lui_offset = &except_vec_vi_lui - &except_vec_vi; - const int ori_offset = &except_vec_vi_ori - &except_vec_vi; + const int handler_len = &except_vec_vi_end - vec_start; + const int lui_offset = &except_vec_vi_lui - vec_start; + const int ori_offset = &except_vec_vi_ori - vec_start; if (handler_len > VECTORSPACING) { /* @@ -1272,7 +1280,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) panic("VECTORSPACING too small"); } - memcpy(b, &except_vec_vi, handler_len); + memcpy(b, vec_start, handler_len); #ifdef CONFIG_MIPS_MT_SMTC BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */ @@ -1283,7 +1291,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff); w = (u32 *)(b + ori_offset); *w = (*w & 0xffff0000) | ((u32)handler & 0xffff); - flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len)); + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+handler_len)); } else { /* @@ -1295,7 +1304,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) w = (u32 *)b; *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */ *w = 0; - flush_icache_range((unsigned long)b, (unsigned long)(b+8)); + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+8)); } return (void *)old_handler; @@ -1515,7 +1525,7 @@ void __cpuinit per_cpu_trap_init(void) void __init set_handler(unsigned long offset, void *addr, unsigned long size) { memcpy((void *)(ebase + offset), addr, size); - flush_icache_range(ebase + offset, ebase + offset + size); + local_flush_icache_range(ebase + offset, ebase + offset + size); } static char panic_null_cerr[] __cpuinitdata = @@ -1552,6 +1562,10 @@ void __init trap_init(void) extern char except_vec3_generic, except_vec3_r4000; extern char except_vec4; unsigned long i; + int rollback; + + check_wait(); + rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1616,7 +1630,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, handle_int); + set_except_vector(0, rollback ? rollback_handle_int : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); @@ -1680,6 +1694,8 @@ void __init trap_init(void) signal32_init(); #endif - flush_icache_range(ebase, ebase + 0x400); + local_flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); + + sort_extable(__start___dbe_table, __stop___dbe_table); } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index b5470ceb418..afb119f3568 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -36,6 +36,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + *(.text.*) *(.fixup) *(.gnu.warning) } :text = 0 diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 8d7784122c1..edac9892c51 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -39,12 +39,14 @@ #ifdef USE_DOUBLE #define LOAD ld +#define LOAD32 lwu #define ADD daddu #define NBYTES 8 #else #define LOAD lw +#define LOAD32 lw #define ADD addu #define NBYTES 4 @@ -60,6 +62,14 @@ ADD sum, v1; \ .set pop +#define ADDC32(sum,reg) \ + .set push; \ + .set noat; \ + addu sum, reg; \ + sltu v1, sum, reg; \ + addu sum, v1; \ + .set pop + #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ LOAD _t1, (offset + UNIT(1))(src); \ @@ -132,7 +142,7 @@ LEAF(csum_partial) beqz t8, .Lqword_align andi t8, src, 0x8 - lw t0, 0x00(src) + LOAD32 t0, 0x00(src) LONG_SUBU a1, a1, 0x4 ADDC(sum, t0) PTR_ADDU src, src, 0x4 @@ -211,7 +221,7 @@ LEAF(csum_partial) LONG_SRL t8, t8, 0x2 .Lend_words: - lw t0, (src) + LOAD32 t0, (src) LONG_SUBU t8, t8, 0x1 ADDC(sum, t0) .set reorder /* DADDI_WAR */ @@ -230,6 +240,9 @@ LEAF(csum_partial) /* Still a full word to go */ ulw t1, (src) PTR_ADDIU src, 4 +#ifdef USE_DOUBLE + dsll t1, t1, 32 /* clear lower 32bit */ +#endif ADDC(sum, t1) 1: move t1, zero @@ -280,7 +293,7 @@ LEAF(csum_partial) 1: .set reorder /* Add the passed partial csum. */ - ADDC(sum, a2) + ADDC32(sum, a2) jr ra .set noreorder END(csum_partial) @@ -681,7 +694,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) .set pop 1: .set reorder - ADDC(sum, psum) + ADDC32(sum, psum) jr ra .set noreorder diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 27a5b466c85..5500c20c79a 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void) flush_cache_range = r3k_flush_cache_range; flush_cache_page = r3k_flush_cache_page; flush_icache_range = r3k_flush_icache_range; + local_flush_icache_range = r3k_flush_icache_range; flush_cache_sigtramp = r3k_flush_cache_sigtramp; local_flush_data_cache_page = local_r3k_flush_data_cache_page; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 71df3390c07..6e99665ae86 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -543,12 +543,8 @@ struct flush_icache_range_args { unsigned long end; }; -static inline void local_r4k_flush_icache_range(void *args) +static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end) { - struct flush_icache_range_args *fir_args = args; - unsigned long start = fir_args->start; - unsigned long end = fir_args->end; - if (!cpu_has_ic_fills_f_dc) { if (end - start >= dcache_size) { r4k_blast_dcache(); @@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args) protected_blast_icache_range(start, end); } +static inline void local_r4k_flush_icache_range_ipi(void *args) +{ + struct flush_icache_range_args *fir_args = args; + unsigned long start = fir_args->start; + unsigned long end = fir_args->end; + + local_r4k_flush_icache_range(start, end); +} + static void r4k_flush_icache_range(unsigned long start, unsigned long end) { struct flush_icache_range_args args; @@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1); + r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1); instruction_hazard(); } @@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void) local_flush_data_cache_page = local_r4k_flush_data_cache_page; flush_data_cache_page = r4k_flush_data_cache_page; flush_icache_range = r4k_flush_icache_range; + local_flush_icache_range = local_r4k_flush_icache_range; #if defined(CONFIG_DMA_NONCOHERENT) if (coherentio) { diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index a9f7f1f5e9b..f7c8f9ce39c 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void) flush_cache_range = (void *) tx39h_flush_icache_all; flush_cache_page = (void *) tx39h_flush_icache_all; flush_icache_range = (void *) tx39h_flush_icache_all; + local_flush_icache_range = (void *) tx39h_flush_icache_all; flush_cache_sigtramp = (void *) tx39h_flush_icache_all; local_flush_data_cache_page = (void *) tx39h_flush_icache_all; @@ -390,6 +391,7 @@ void __cpuinit tx39_cache_init(void) flush_cache_range = tx39_flush_cache_range; flush_cache_page = tx39_flush_cache_page; flush_icache_range = tx39_flush_icache_range; + local_flush_icache_range = tx39_flush_icache_range; flush_cache_sigtramp = tx39_flush_cache_sigtramp; local_flush_data_cache_page = local_tx39_flush_data_cache_page; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 034e8506f6e..1eb7c71e3d6 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); void (*flush_icache_range)(unsigned long start, unsigned long end); +void (*local_flush_icache_range)(unsigned long start, unsigned long end); void (*__flush_cache_vmap)(void); void (*__flush_cache_vunmap)(void); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 76da73a5ab3..979cf919728 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void) void __cpuinit flush_tlb_handlers(void) { - flush_icache_range((unsigned long)handle_tlbl, + local_flush_icache_range((unsigned long)handle_tlbl, (unsigned long)handle_tlbl + sizeof(handle_tlbl)); - flush_icache_range((unsigned long)handle_tlbs, + local_flush_icache_range((unsigned long)handle_tlbs, (unsigned long)handle_tlbs + sizeof(handle_tlbs)); - flush_icache_range((unsigned long)handle_tlbm, + local_flush_icache_range((unsigned long)handle_tlbm, (unsigned long)handle_tlbm + sizeof(handle_tlbm)); } diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 3b7dd722c32..cef2db8d222 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o # FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o +obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ea705e4945..f84a46a8ae6 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -84,12 +84,17 @@ static void msmtc_cpus_done(void) static void __init msmtc_smp_setup(void) { - mipsmt_build_cpu_map(0); + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + * we would appear to need an upper bound now. + */ + smp_num_siblings = smtc_build_cpu_map(0); } static void __init msmtc_prepare_cpus(unsigned int max_cpus) { - mipsmt_prepare_cpus(); + smtc_prepare_cpus(max_cpus); } struct plat_smp_ops msmtc_smp_ops = { diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37f..c8c32f417b6 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 00000000000..bea9b6cdfdb --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/ssb/ssb.h> + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82b..f97ab146101 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { + return 0; +} + +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + irq = bc->pci_int[slot]; if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); + irq = request_bridge_irq(bc); if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); + return irq; + + bc->pci_int[slot] = irq; } irq_to_bridge[irq] = bc; irq_to_slot[irq] = slot; - return irq; -} + dev->irq = irq; -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ return 0; } diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 60141235ec4..52486c4d2b0 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void) return res; /* Second HPC is missing? */ - if (!ip22_is_fullhouse() || + if (ip22_is_fullhouse() || get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) return 0; diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 0afe94c48fb..fe6bee09cec 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -53,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) txx9_ce_res[i].name = txx9_ce_res_name[i]; } + txx9_pcode = pcode; sprintf(txx9_pcode_str, "TX%x", pcode); if (base) { txx9_reg_res.start = base & 0xfffffffffULL; diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index cba36a247e3..92dd1a0ca35 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -72,6 +72,7 @@ static void irq_dispatch(unsigned int irq) cascade = irq_cascade + irq; if (cascade->get_irq != NULL) { unsigned int source_irq = irq; + int ret; desc = irq_desc + source_irq; if (desc->chip->mask_ack) desc->chip->mask_ack(source_irq); @@ -79,8 +80,9 @@ static void irq_dispatch(unsigned int irq) desc->chip->mask(source_irq); desc->chip->ack(source_irq); } - irq = cascade->get_irq(irq); - if (irq < 0) + ret = cascade->get_irq(irq); + irq = ret; + if (ret < 0) atomic_inc(&irq_err_count); else irq_dispatch(irq); diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 761c434a248..56c64ccc9c2 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -20,22 +20,8 @@ EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); atomic_t irq_err_count; /* - * MN10300 INTC controller operations + * MN10300 interrupt controller operations */ -static void mn10300_cpupic_disable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); -} - -static void mn10300_cpupic_enable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); -} - static void mn10300_cpupic_ack(unsigned int irq) { u16 tmp; @@ -60,26 +46,54 @@ static void mn10300_cpupic_mask_ack(unsigned int irq) static void mn10300_cpupic_unmask(unsigned int irq) { u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; tmp = GxICR(irq); } -static void mn10300_cpupic_end(unsigned int irq) +static void mn10300_cpupic_unmask_clear(unsigned int irq) { + /* the MN10300 PIC latches its interrupt request bit, even after the + * device has ceased to assert its interrupt line and the interrupt + * channel has been disabled in the PIC, so for level-triggered + * interrupts we need to clear the request bit when we re-enable */ u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; tmp = GxICR(irq); } -static struct irq_chip mn10300_cpu_pic = { - .name = "cpu", - .disable = mn10300_cpupic_disable, - .enable = mn10300_cpupic_enable, +/* + * MN10300 PIC level-triggered IRQ handling. + * + * The PIC has no 'ACK' function per se. It is possible to clear individual + * channel latches, but each latch relatches whether or not the channel is + * masked, so we need to clear the latch when we unmask the channel. + * + * Also for this reason, we don't supply an ack() op (it's unused anyway if + * mask_ack() is provided), and mask_ack() just masks. + */ +static struct irq_chip mn10300_cpu_pic_level = { + .name = "cpu_l", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask_clear, + .ack = NULL, + .mask = mn10300_cpupic_mask, + .mask_ack = mn10300_cpupic_mask, + .unmask = mn10300_cpupic_unmask_clear, +}; + +/* + * MN10300 PIC edge-triggered IRQ handling. + * + * We use the latch clearing function of the PIC as the 'ACK' function. + */ +static struct irq_chip mn10300_cpu_pic_edge = { + .name = "cpu_e", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask, .ack = mn10300_cpupic_ack, .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, - .end = mn10300_cpupic_end, }; /* @@ -114,7 +128,8 @@ void set_intr_level(int irq, u16 level) */ void set_intr_postackable(int irq) { - set_irq_handler(irq, handle_level_irq); + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, + handle_level_irq); } /* @@ -126,8 +141,12 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) if (irq_desc[irq].chip == &no_irq_type) - set_irq_chip_and_handler(irq, &mn10300_cpu_pic, - handle_edge_irq); + /* due to the PIC latching interrupt requests, even + * when the IRQ is disabled, IRQ_PENDING is superfluous + * and we can use handle_level_irq() for edge-triggered + * interrupts */ + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, + handle_level_irq); unit_init_IRQ(); } diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index babb7c2ac37..e4606586f94 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -1,6 +1,6 @@ /* MN10300 Low level time management * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * - Derived from arch/i386/kernel/time.c * @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/profile.h> +#include <linux/cnt32_to_63.h> #include <asm/irq.h> #include <asm/div64.h> #include <asm/processor.h> @@ -40,27 +41,54 @@ static struct irqaction timer_irq = { .name = "timer", }; +static unsigned long sched_clock_multiplier; + /* * scheduler clock - returns current time in nanosec units. */ unsigned long long sched_clock(void) { union { - unsigned long long l; - u32 w[2]; - } quot; + unsigned long long ll; + unsigned l[2]; + } tsc64, result; + unsigned long tsc, tmp; + unsigned product[3]; /* 96-bit intermediate value */ + + /* read the TSC value + */ + tsc = 0 - get_cycles(); /* get_cycles() counts down */ - quot.w[0] = mn10300_last_tsc - get_cycles(); - quot.w[1] = 1000000000; + /* expand to 64-bits. + * - sched_clock() must be called once a minute or better or the + * following will go horribly wrong - see cnt32_to_63() + */ + tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; - asm("mulu %2,%3,%0,%1" - : "=r"(quot.w[1]), "=r"(quot.w[0]) - : "0"(quot.w[1]), "1"(quot.w[0]) + /* scale the 64-bit TSC value to a nanosecond value via a 96-bit + * intermediate + */ + asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */ + "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */ + "add %3,%1 \n" + "addc 0,%2 \n" /* result in %2:%1:%0 */ + : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp) + : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier) : "cc"); - do_div(quot.l, MN10300_TSCCLK); + result.l[0] = product[1] << 16 | product[0] >> 16; + result.l[1] = product[2] << 16 | product[1] >> 16; - return quot.l; + return result.ll; +} + +/* + * initialise the scheduler clock + */ +static void __init mn10300_sched_clock_init(void) +{ + sched_clock_multiplier = + __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } /* @@ -128,4 +156,6 @@ void __init time_init(void) /* start the watchdog timer */ watchdog_go(); #endif + + mn10300_sched_clock_init(); } diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 78f092ca031..33cf25025da 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code, * If we're in an interrupt or have no user * context, we must not take the fault.. */ - if (in_interrupt() || !mm) + if (in_atomic() || !mm) goto no_context; down_read(&mm->mmap_sem); diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 14b2c817cff..70e8cb4ea26 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -51,7 +51,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 6a352414a35..72812a9439a 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -52,7 +52,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index 69ff671498e..12c04c5e558 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -104,7 +104,7 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset, buf->count -= reclen; return 0; Efault: - buffer->error = -EFAULT; + buf->error = -EFAULT; return -EFAULT; } diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index fdacdd4341c..44138c3e6ea 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -47,7 +47,9 @@ #include <linux/string.h> #include <linux/kernel.h> #include <linux/bug.h> +#include <linux/uaccess.h> +#include <asm/sections.h> #include <asm/unwind.h> #if 0 @@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod) deregister_unwind_table(mod); module_bug_cleanup(mod); } + +#ifdef CONFIG_64BIT +void *dereference_function_descriptor(void *ptr) +{ + Elf64_Fdesc *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->addr, p)) + ptr = p; + return ptr; +} +#endif diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 9155c9312c1..c6be19e9cea 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y) KBUILD_CFLAGS += -mcpu=powerpc endif +# Work around a gcc code-gen bug with -fno-omit-frame-pointer. +ifeq ($(CONFIG_FTRACE),y) +KBUILD_CFLAGS += -mno-sched-epilog +endif + cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 14174aa2407..65d1a8454d2 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -49,7 +49,7 @@ zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ +$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c @@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -image-$(CONFIG_PPC_HOLLY) += zImage.holly +image-$(CONFIG_PPC_HOLLY) += dtbImage.holly image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index f87fe7b9ced..c6e11ebeceb 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -133,61 +133,61 @@ reg = <0x00007400 0x00000400>; big-endian; }; + }; - pci@1000 { - device_type = "pci"; - compatible = "tsi109-pci", "tsi108-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x00001000 0x00001000>; - bus-range = <0x0 0x0>; - /*----------------------------------------------------+ - | PCI memory range. - | 01 denotes I/O space - | 02 denotes 32-bit memory space - +----------------------------------------------------*/ - ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 - 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; - clock-frequency = <133333332>; - interrupt-parent = <&MPIC>; + pci@c0001000 { + device_type = "pci"; + compatible = "tsi109-pci", "tsi108-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xc0001000 0x00001000>; + bus-range = <0x0 0x0>; + /*----------------------------------------------------+ + | PCI memory range. + | 01 denotes I/O space + | 02 denotes 32-bit memory space + +----------------------------------------------------*/ + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; + interrupt-parent = <&MPIC>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + /*----------------------------------------------------+ + | The INTA, INTB, INTC, INTD are shared. + +----------------------------------------------------*/ + interrupt-map = < + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + device_type = "pic-router"; + interrupt-controller; + big-endian; + clock-frequency = <0>; + #address-cells = <0>; + #interrupt-cells = <2>; interrupts = <0x17 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - /*----------------------------------------------------+ - | The INTA, INTB, INTC, INTD are shared. - +----------------------------------------------------*/ - interrupt-map = < - 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 - 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 - 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 - 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 - - 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 - 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 - 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 - 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 - - 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 - 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 - 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 - 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 - - 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 - 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 - 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 - 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 - >; - - RT0: router@1180 { - device_type = "pic-router"; - interrupt-controller; - big-endian; - clock-frequency = <0>; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x17 0x2>; - interrupt-parent = <&MPIC>; - }; + interrupt-parent = <&MPIC>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 3b3a1062cb2..584a4f184eb 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -281,7 +281,7 @@ cell-index = <0>; reg = <0x0 0x80>; interrupt-parent = <&mpic>; - interrupts = <60 2>; + interrupts = <76 2>; }; dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", @@ -289,7 +289,7 @@ cell-index = <1>; reg = <0x80 0x80>; interrupt-parent = <&mpic>; - interrupts = <61 2>; + interrupts = <77 2>; }; dma-channel@2 { compatible = "fsl,mpc8610-dma-channel", @@ -297,7 +297,7 @@ cell-index = <2>; reg = <0x100 0x80>; interrupt-parent = <&mpic>; - interrupts = <62 2>; + interrupts = <78 2>; }; dma-channel@3 { compatible = "fsl,mpc8610-dma-channel", @@ -305,7 +305,7 @@ cell-index = <3>; reg = <0x180 0x80>; interrupt-parent = <&mpic>; - interrupts = <63 2>; + interrupts = <79 2>; }; }; diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h index 2a6fa0183ac..0f5e8ff59a8 100644 --- a/arch/powerpc/include/asm/cpm2.h +++ b/arch/powerpc/include/asm/cpm2.h @@ -337,6 +337,11 @@ typedef struct scc_param { uint scc_tcrc; /* Internal */ } sccp_t; +/* Function code bits. +*/ +#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */ +#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */ + /* CPM Ethernet through SCC1. */ typedef struct scc_enet { diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 80d1f399ee5..64c6ee22eef 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -409,6 +409,13 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +/* There's actually a third entry here, but it's unused */ +struct ppc64_opd_entry +{ + unsigned long funcaddr; + unsigned long r2; +}; + #ifdef __KERNEL__ #ifdef CONFIG_SPU_BASE diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index db0b8f3b880..4597c491e9b 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -153,12 +153,10 @@ #define __S110 PAGE_SHARED_X #define __S111 PAGE_SHARED_X -#ifdef CONFIG_HUGETLB_PAGE - +#ifdef CONFIG_PPC_MM_SLICES #define HAVE_ARCH_UNMAPPED_AREA #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN - -#endif +#endif /* CONFIG_PPC_MM_SLICES */ #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 916018e425c..07956f3e784 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -2,6 +2,8 @@ #define _ASM_POWERPC_SECTIONS_H #ifdef __KERNEL__ +#include <linux/elf.h> +#include <linux/uaccess.h> #include <asm-generic/sections.h> #ifdef __powerpc64__ @@ -16,6 +18,17 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +#undef dereference_function_descriptor +static inline void *dereference_function_descriptor(void *ptr) +{ + struct ppc64_opd_entry *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->funcaddr, p)) + ptr = p; + return ptr; +} + #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 64f5948ebc9..946daea780f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -14,12 +14,13 @@ endif ifdef CONFIG_FTRACE # Do not trace early boot code -CFLAGS_REMOVE_cputable.o = -pg -CFLAGS_REMOVE_prom_init.o = -pg +CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog ifdef CONFIG_DYNAMIC_FTRACE # dynamic ftrace setup. -CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog endif endif diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 367129789cc..5af4e9b2dbe 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, unsigned int flags, unsigned int length) { char *ptr = (char *) ¤t->thread.TS_FPR(reg); - int ret; + int ret = 0; flush_vsx_to_thread(current); diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index d308a9f70f1..31982d05d81 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -34,11 +34,7 @@ #include <asm/smp.h> #ifdef CONFIG_HOTPLUG_CPU -/* this is used for software suspend, and that shuts down - * CPUs even while the system is still booting... */ -#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ - (system_state == SYSTEM_RUNNING \ - || system_state == SYSTEM_BOOTING)) +#define cpu_should_die() cpu_is_offline(smp_processor_id()) #else #define cpu_should_die() 0 #endif diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 019b02d8844..15c611de1ee 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore) stw r9,_NIP(r11) /* make it do a blr */ #ifdef CONFIG_SMP - mfspr r12,SPRN_SPRG3 + rlwinm r12,r11,0,0,31-THREAD_SHIFT lwz r11,TI_CPU(r12) /* get cpu number * 4 */ slwi r11,r11,2 #else diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S index 06304034b39..47a1a983ff8 100644 --- a/arch/powerpc/kernel/idle_e500.S +++ b/arch/powerpc/kernel/idle_e500.S @@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore) stw r9,_NIP(r11) /* make it do a blr */ #ifdef CONFIG_SMP - mfspr r12,SPRN_SPRG3 + rlwinm r12,r1,0,0,31-THREAD_SHIFT lwz r11,TI_CPU(r12) /* get cpu number * 4 */ slwi r11,r11,2 #else li r11,0 #endif + b transfer_to_handler_cont diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index b4fdf2f2743..fe8f71dd0b3 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, linux_regs->msr |= MSR_SE; #endif kgdb_single_step = 1; - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } return 0; } diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index ee6a2982d56..1af2377e499 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -22,7 +22,6 @@ #include <linux/vmalloc.h> #include <linux/bug.h> #include <asm/module.h> -#include <asm/uaccess.h> #include <asm/firmware.h> #include <asm/code-patching.h> #include <linux/sort.h> @@ -42,13 +41,6 @@ #define DEBUGP(fmt , ...) #endif -/* There's actually a third entry here, but it's unused */ -struct ppc64_opd_entry -{ - unsigned long funcaddr; - unsigned long r2; -}; - /* Like PPC32, we need little trampolines to do > 24-bit jumps (into the kernel itself). But on PPC64, these need to be used for every jump, actually, to reset r2 (TOC+0x8000). */ diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 4a8ce62fe11..9f6c1ca1739 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -66,11 +66,12 @@ SECTIONS __got2_end = .; #endif /* CONFIG_PPC32 */ - . = ALIGN(PAGE_SIZE); - _etext = .; - PROVIDE32 (etext = .); } :kernel + . = ALIGN(PAGE_SIZE); + _etext = .; + PROVIDE32 (etext = .); + /* Read-only data */ RODATA diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 14be408dfc9..8920eea3452 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -191,12 +191,17 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, ssize); unsigned long va = hpt_va(vaddr, vsid, ssize); + unsigned long tprot = prot; + + /* Make kernel text executable */ + if (in_kernel_text(vaddr)) + tprot &= ~HPTE_R_N; hash = hpt_hash(va, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); BUG_ON(!ppc_md.hpte_insert); - ret = ppc_md.hpte_insert(hpteg, va, paddr, prot, + ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot, HPTE_V_BOLTED, psize, ssize); if (ret < 0) @@ -584,7 +589,7 @@ void __init htab_initialize(void) { unsigned long table; unsigned long pteg_count; - unsigned long prot, tprot; + unsigned long prot; unsigned long base = 0, size = 0, limit; int i; @@ -660,10 +665,9 @@ void __init htab_initialize(void) for (i=0; i < lmb.memory.cnt; i++) { base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; - tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0); DBG("creating mapping for region: %lx..%lx (prot: %x)\n", - base, size, tprot); + base, size, prot); #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned @@ -680,21 +684,21 @@ void __init htab_initialize(void) unsigned long dart_table_end = dart_tablebase + 16 * MB; if (base != dart_tablebase) BUG_ON(htab_bolt_mapping(base, dart_tablebase, - __pa(base), tprot, + __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); if ((base + size) > dart_table_end) BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, base + size, __pa(dart_table_end), - tprot, + prot, mmu_linear_psize, mmu_kernel_ssize)); continue; } #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), - tprot, mmu_linear_psize, mmu_kernel_ssize)); + prot, mmu_linear_psize, mmu_kernel_ssize)); } /* diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 1c1b627ee84..67595bc380d 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx) !(tmp->flags & SPU_CREATE_NOSCHED) && (!victim || tmp->prio > victim->prio)) { victim = spu->ctx; - get_spu_context(victim); } } + if (victim) + get_spu_context(victim); mutex_unlock(&cbe_spu_info[node].list_mutex); if (victim) { @@ -727,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx) /* not a candidate for interruptible because it's called either from the scheduler thread or from spu_deactivate */ mutex_lock(&ctx->state_mutex); - __spu_schedule(spu, ctx); + if (ctx->state == SPU_STATE_SAVED) + __spu_schedule(spu, ctx); spu_release(ctx); } -static void spu_unschedule(struct spu *spu, struct spu_context *ctx) +/** + * spu_unschedule - remove a context from a spu, and possibly release it. + * @spu: The SPU to unschedule from + * @ctx: The context currently scheduled on the SPU + * @free_spu Whether to free the SPU for other contexts + * + * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the + * SPU is made available for other contexts (ie, may be returned by + * spu_get_idle). If this is zero, the caller is expected to schedule another + * context to this spu. + * + * Should be called with ctx->state_mutex held. + */ +static void spu_unschedule(struct spu *spu, struct spu_context *ctx, + int free_spu) { int node = spu->node; mutex_lock(&cbe_spu_info[node].list_mutex); cbe_spu_info[node].nr_active--; - spu->alloc_state = SPU_FREE; + if (free_spu) + spu->alloc_state = SPU_FREE; spu_unbind_context(spu, ctx); ctx->stats.invol_ctx_switch++; spu->stats.invol_ctx_switch++; @@ -837,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio) if (spu) { new = grab_runnable_context(max_prio, spu->node); if (new || force) { - spu_unschedule(spu, ctx); + spu_unschedule(spu, ctx, new == NULL); if (new) { if (new->flags & SPU_CREATE_NOSCHED) wake_up(&new->stop_wq); @@ -910,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { - spu_unschedule(spu, ctx); + spu_unschedule(spu, ctx, 0); if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_add_to_rq(ctx); } else { diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index ef74a0763ec..8c619963bec 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) int i; u8 *dummy; struct pci_bus *bus = dev->bus; + resource_size_t end = 0; + + for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) { + unsigned long flags = pci_resource_flags(dev, i); + if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM) + end = pci_resource_end(dev, i); + } for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { if ((bus->resource[i]) && (bus->resource[i]->flags & IORESOURCE_MEM)) { - dummy = ioremap(bus->resource[i]->end - 3, 0x4); + if (bus->resource[i]->end == end) + dummy = ioremap(bus->resource[i]->start, 0x4); + else + dummy = ioremap(bus->resource[i]->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 58ecdd72630..be60d64be7a 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -2,7 +2,7 @@ CFLAGS_bootx_init.o += -fPIC ifdef CONFIG_FTRACE # Do not trace early boot code -CFLAGS_REMOVE_bootx_init.o = -pg +CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog endif obj-y += pic.o setup.o time.o feature.o pci.o \ diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h index cde81fa64f8..a2be3a978d5 100644 --- a/arch/s390/kernel/compat_ptrace.h +++ b/arch/s390/kernel/compat_ptrace.h @@ -42,6 +42,7 @@ struct user_regs_struct32 u32 gprs[NUM_GPRS]; u32 acrs[NUM_ACRS]; u32 orig_gpr2; + /* nb: there's a 4-byte hole here */ s390_fp_regs fp_regs; /* * These per registers are in here so that gdb can modify them diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 2815bfe348a..c8b08289eb8 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr) */ tmp = (addr_t) task_pt_regs(child)->orig_gpr2; + } else if (addr < (addr_t) &dummy->regs.fp_regs) { + /* + * prevent reads of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + tmp = 0; + } else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) */ task_pt_regs(child)->orig_gpr2 = data; + } else if (addr < (addr_t) &dummy->regs.fp_regs) { + /* + * prevent writes of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + return 0; + } else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr) */ tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4); + } else if (addr < (addr_t) &dummy32->regs.fp_regs) { + /* + * prevent reads of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + tmp = 0; + } else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child, */ *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp; + } else if (addr < (addr_t) &dummy32->regs.fp_regs) { + /* + * prevent writess of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + return 0; + } else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ca114fe46ff..06acb1a18bb 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -169,6 +169,8 @@ void init_cpu_timer(void) static void clock_comparator_interrupt(__u16 code) { + if (S390_lowcore.clock_comparator == -1ULL) + set_clock_comparator(S390_lowcore.clock_comparator); } static void etr_timing_alert(struct etr_irq_parm *); diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index fc6ab6094df..0953cee05ef 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -1,14 +1,9 @@ /* - * arch/s390/lib/delay.c * Precise Delay Loops for S390 * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * - * Derived from "arch/i386/lib/delay.c" - * Copyright (C) 1993 Linus Torvalds - * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * Copyright IBM Corp. 1999,2008 + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Heiko Carstens <heiko.carstens@de.ibm.com>, */ #include <linux/sched.h> @@ -29,30 +24,31 @@ void __delay(unsigned long loops) asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } -/* - * Waits for 'usecs' microseconds using the TOD clock comparator. - */ -void __udelay(unsigned long usecs) +static void __udelay_disabled(unsigned long usecs) { - u64 end, time, old_cc = 0; - unsigned long flags, cr0, mask, dummy; - int irq_context; + unsigned long mask, cr0, cr0_saved; + u64 clock_saved; - irq_context = in_interrupt(); - if (!irq_context) - local_bh_disable(); - local_irq_save(flags); - if (raw_irqs_disabled_flags(flags)) { - old_cc = local_tick_disable(); - S390_lowcore.clock_comparator = -1ULL; - __ctl_store(cr0, 0, 0); - dummy = (cr0 & 0xffff00e0) | 0x00000800; - __ctl_load(dummy , 0, 0); - mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; - } else - mask = psw_kernel_bits | PSW_MASK_WAIT | - PSW_MASK_EXT | PSW_MASK_IO; + clock_saved = local_tick_disable(); + set_clock_comparator(get_clock() + ((u64) usecs << 12)); + __ctl_store(cr0_saved, 0, 0); + cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; + __ctl_load(cr0 , 0, 0); + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + trace_hardirqs_on(); + __load_psw_mask(mask); + local_irq_disable(); + __ctl_load(cr0_saved, 0, 0); + local_tick_enable(clock_saved); + set_clock_comparator(S390_lowcore.clock_comparator); +} +static void __udelay_enabled(unsigned long usecs) +{ + unsigned long mask; + u64 end, time; + + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO; end = get_clock() + ((u64) usecs << 12); do { time = end < S390_lowcore.clock_comparator ? @@ -62,13 +58,37 @@ void __udelay(unsigned long usecs) __load_psw_mask(mask); local_irq_disable(); } while (get_clock() < end); + set_clock_comparator(S390_lowcore.clock_comparator); +} - if (raw_irqs_disabled_flags(flags)) { - __ctl_load(cr0, 0, 0); - local_tick_enable(old_cc); +/* + * Waits for 'usecs' microseconds using the TOD clock comparator. + */ +void __udelay(unsigned long usecs) +{ + unsigned long flags; + + preempt_disable(); + local_irq_save(flags); + if (in_irq()) { + __udelay_disabled(usecs); + goto out; + } + if (in_softirq()) { + if (raw_irqs_disabled_flags(flags)) + __udelay_disabled(usecs); + else + __udelay_enabled(usecs); + goto out; } - if (!irq_context) + if (raw_irqs_disabled_flags(flags)) { + local_bh_disable(); + __udelay_disabled(usecs); _local_bh_enable(); - set_clock_comparator(S390_lowcore.clock_comparator); + goto out; + } + __udelay_enabled(usecs); +out: local_irq_restore(flags); + preempt_enable(); } diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 29926a9b9ce..851c870adf3 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:18:59 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 14:21:17 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -58,7 +58,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -261,9 +261,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set # # File systems @@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index c4b3e1d8950..4f8b1974f2c 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:44:41 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 14:18:17 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -270,6 +271,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support @@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set # # File systems diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h index 81b3d515fcb..5580fd47100 100644 --- a/arch/sh/include/asm/uaccess_64.h +++ b/arch/sh/include/asm/uaccess_64.h @@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); +extern long __strnlen_user(const char *__s, long __n); + #endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 04c7da96814..e640c63d581 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -2,7 +2,7 @@ * arch/sh/kernel/cpu/sh5/entry.S * * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2004 - 2008 Paul Mundt * Copyright (C) 2003, 2004 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -923,6 +923,8 @@ ret_from_exception: blink tr0, ZERO resume_kernel: + CLI() + pta restore_all, tr0 getcon KCR0, r6 @@ -939,19 +941,11 @@ need_resched: andi r7, 0xf0, r7 bne r7, ZERO, tr0 - movi ((PREEMPT_ACTIVE >> 16) & 65535), r8 - shori (PREEMPT_ACTIVE & 65535), r8 - st.l r6, TI_PRE_COUNT, r8 - - STI() - movi schedule, r7 + movi preempt_schedule_irq, r7 ori r7, 1, r7 ptabs r7, tr1 blink tr1, LINK - st.l r6, TI_PRE_COUNT, ZERO - CLI() - pta need_resched, tr1 blink tr1, ZERO #endif diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 0bc17def55a..efbb4268875 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -92,6 +92,7 @@ ENTRY(ret_from_irq) bra resume_userspace nop ENTRY(resume_kernel) + cli mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count tst r0, r0 bf noresched @@ -105,28 +106,9 @@ need_resched: and #0xf0, r0 ! interrupts off (exception path)? cmp/eq #0xf0, r0 bt noresched - - mov.l 1f, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - -#ifdef CONFIG_TRACE_IRQFLAGS mov.l 3f, r0 - jsr @r0 - nop -#endif - sti - mov.l 2f, r0 - jsr @r0 - nop - mov #0, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - cli -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 4f, r0 - jsr @r0 + jsr @r0 ! call preempt_schedule_irq nop -#endif - bra need_resched nop @@ -137,10 +119,7 @@ noresched: .align 2 1: .long PREEMPT_ACTIVE 2: .long schedule -#ifdef CONFIG_TRACE_IRQFLAGS -3: .long trace_hardirqs_on -4: .long trace_hardirqs_off -#endif +3: .long preempt_schedule_irq #endif ENTRY(resume_userspace) diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 4703dff174d..94df56b0d1f 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image) /* now call it */ rnk = (relocate_new_kernel_t) reboot_code_buffer; - (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); + (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 5922edd416d..9c6424892bd 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child) void user_disable_single_step(struct task_struct *child) { + struct pt_regs *regs = child->thread.uregs; + regs->sr &= ~SR_SSTEP; } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index a35207655e7..de832056bf1 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void) (unsigned long)(free_mem >> 20)); crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); } } #else @@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn, request_resource(res, &data_resource); request_resource(res, &bss_resource); -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - request_resource(res, &crashk_res); -#endif - add_active_range(nid, start_pfn, end_pfn); } diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 59cd2859ce9..9061b86d73f 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, version = call >> 16; /* hack for backward compatibility */ call &= 0xffff; - if (call <= SEMCTL) + if (call <= SEMTIMEDOP) switch (call) { case SEMOP: return sys_semtimedop(first, diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 895bb3f335c..64b8f7f96f9 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str) } __setup("memchunk.", memchunk_setup); -static void memchunk_cmdline_override(char *name, unsigned long *sizep) +static void __init memchunk_cmdline_override(char *name, unsigned long *sizep) { char *p = boot_command_line; int k = strlen(name); @@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep) } } -int platform_resource_setup_memory(struct platform_device *pdev, - char *name, unsigned long memsize) +int __init platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) { struct resource *r; dma_addr_t dma_handle; diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h index 7201752cf93..a8180e546a4 100644 --- a/arch/sparc/include/asm/smp_32.h +++ b/arch/sparc/include/asm/smp_32.h @@ -50,27 +50,24 @@ struct seq_file; void smp_bogo(struct seq_file *); void smp_info(struct seq_file *); -BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long) BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void) BTFIXUPDEF_BLACKBOX(hard_smp_processor_id) BTFIXUPDEF_BLACKBOX(load_current) -#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5) +#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4) -static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } +static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); } static inline void xc1(smpfunc_t func, unsigned long arg1) -{ smp_cross_call(func, arg1, 0, 0, 0, 0); } +{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); } static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) -{ smp_cross_call(func, arg1, arg2, 0, 0, 0); } +{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); } static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3) -{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); } +{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); } static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) -{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); } -static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, - unsigned long arg3, unsigned long arg4, unsigned long arg5) -{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); } +{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); } static inline int smp_call_function(void (*func)(void *info), void *info, int wait) { @@ -78,6 +75,14 @@ static inline int smp_call_function(void (*func)(void *info), void *info, int wa return 0; } +static inline int smp_call_function_single(int cpuid, void (*func) (void *info), + void *info, int wait) +{ + smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid), + (unsigned long) info, 0, 0, 0); + return 0; +} + static inline int cpu_logical_map(int cpu) { return cpu; diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index cc4c235c4f5..f58c537446a 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -70,7 +70,7 @@ struct of_bus { int *addrc, int *sizec); int (*map)(u32 *addr, const u32 *range, int na, int ns, int pna); - unsigned int (*get_flags)(const u32 *addr); + unsigned long (*get_flags)(const u32 *addr, unsigned long); }; /* @@ -130,8 +130,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range, return 0; } -static unsigned int of_bus_default_get_flags(const u32 *addr) +static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags) { + if (flags) + return flags; return IORESOURCE_MEM; } @@ -194,17 +196,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range, return 0; } -static unsigned int of_bus_pci_get_flags(const u32 *addr) +static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) { - unsigned int flags = 0; u32 w = addr[0]; + /* For PCI, we override whatever child busses may have used. */ + flags = 0; switch((w >> 24) & 0x03) { case 0x01: flags |= IORESOURCE_IO; + break; + case 0x02: /* 32 bits */ case 0x03: /* 64 bits */ flags |= IORESOURCE_MEM; + break; } if (w & 0x40000000) flags |= IORESOURCE_PREFETCH; @@ -235,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) return of_bus_default_map(addr, range, na, ns, pna); } -static unsigned int of_bus_sbus_get_flags(const u32 *addr) +static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags) { return IORESOURCE_MEM; } @@ -362,10 +368,11 @@ static void __init build_device_resources(struct of_device *op, int pna, pns; size = of_read_addr(reg + na, ns); - flags = bus->get_flags(reg); memcpy(addr, reg, na * 4); + flags = bus->get_flags(reg, 0); + /* If the immediate parent has no ranges property to apply, * just use a 1<->1 mapping. */ @@ -393,6 +400,8 @@ static void __init build_device_resources(struct of_device *op, dna, dns, pna)) break; + flags = pbus->get_flags(addr, flags); + dna = pna; dns = pns; dbus = pbus; diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c index 20699c70141..8ce6285a06d 100644 --- a/arch/sparc/kernel/ptrace.c +++ b/arch/sparc/kernel/ptrace.c @@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 38 * sizeof(u32), + .n = 38, .size = sizeof(u32), .align = sizeof(u32), .get = genregs32_get, .set = genregs32_set }, @@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 99 * sizeof(u32), + .n = 99, .size = sizeof(u32), .align = sizeof(u32), .get = fpregs32_get, .set = fpregs32_set }, diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index dfde77ff084..69596402a50 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -262,8 +262,9 @@ static struct smp_funcall { static DEFINE_SPINLOCK(cross_call_lock); /* Cross calls must be serialized, at least currently. */ -void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, - unsigned long arg3, unsigned long arg4, unsigned long arg5) +static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, + unsigned long arg2, unsigned long arg3, + unsigned long arg4) { if(smp_processors_ready) { register int high = smp_highest_cpu; @@ -278,7 +279,7 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, register unsigned long a2 asm("i2") = arg2; register unsigned long a3 asm("i3") = arg3; register unsigned long a4 asm("i4") = arg4; - register unsigned long a5 asm("i5") = arg5; + register unsigned long a5 asm("i5") = 0; __asm__ __volatile__( "std %0, [%6]\n\t" @@ -290,11 +291,10 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, /* Init receive/complete mapping, plus fire the IPI's off. */ { - cpumask_t mask; register int i; - mask = cpumask_of_cpu(hard_smp4d_processor_id()); - cpus_andnot(mask, cpu_online_map, mask); + cpu_clear(smp_processor_id(), mask); + cpus_and(mask, cpu_online_map, mask); for(i = 0; i <= high; i++) { if (cpu_isset(i, mask)) { ccall_info.processors_in[i] = 0; @@ -309,12 +309,16 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, i = 0; do { + if (!cpu_isset(i, mask)) + continue; while(!ccall_info.processors_in[i]) barrier(); } while(++i <= high); i = 0; do { + if (!cpu_isset(i, mask)) + continue; while(!ccall_info.processors_out[i]) barrier(); } while(++i <= high); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 406ac1abc83..a14a76ac7f3 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -244,9 +244,9 @@ static struct smp_funcall { static DEFINE_SPINLOCK(cross_call_lock); /* Cross calls must be serialized, at least currently. */ -static void smp4m_cross_call(smpfunc_t func, unsigned long arg1, +static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, unsigned long arg2, unsigned long arg3, - unsigned long arg4, unsigned long arg5) + unsigned long arg4) { register int ncpus = SUN4M_NCPUS; unsigned long flags; @@ -259,14 +259,14 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1, ccall_info.arg2 = arg2; ccall_info.arg3 = arg3; ccall_info.arg4 = arg4; - ccall_info.arg5 = arg5; + ccall_info.arg5 = 0; /* Init receive/complete mapping, plus fire the IPI's off. */ { - cpumask_t mask = cpu_online_map; register int i; cpu_clear(smp_processor_id(), mask); + cpus_and(mask, cpu_online_map, mask); for(i = 0; i < ncpus; i++) { if (cpu_isset(i, mask)) { ccall_info.processors_in[i] = 0; @@ -284,12 +284,16 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1, i = 0; do { + if (!cpu_isset(i, mask)) + continue; while(!ccall_info.processors_in[i]) barrier(); } while(++i < ncpus); i = 0; do { + if (!cpu_isset(i, mask)) + continue; while(!ccall_info.processors_out[i]) barrier(); } while(++i < ncpus); diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 9b6689d9d57..7495bc77468 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -7,6 +7,7 @@ #include <linux/module.h> #include <linux/sched.h> +#include <linux/linkage.h> #include <linux/ptrace.h> #include <linux/errno.h> #include <linux/kernel_stat.h> @@ -792,6 +793,8 @@ void fixup_irqs(void) } spin_unlock_irqrestore(&irq_desc[irq].lock, flags); } + + tick_ops->disable_irq(); } #endif @@ -864,7 +867,7 @@ static void kill_prom_timer(void) : "g1", "g2"); } -void init_irqwork_curcpu(void) +void notrace init_irqwork_curcpu(void) { int cpu = hard_smp_processor_id(); @@ -895,7 +898,7 @@ static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type } } -void __cpuinit sun4v_register_mondo_queues(int this_cpu) +void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu) { struct trap_per_cpu *tb = &trap_block[this_cpu]; diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index f8b50cbf4bf..100ebd52749 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -96,7 +96,7 @@ struct of_bus { int *addrc, int *sizec); int (*map)(u32 *addr, const u32 *range, int na, int ns, int pna); - unsigned int (*get_flags)(const u32 *addr); + unsigned long (*get_flags)(const u32 *addr, unsigned long); }; /* @@ -156,8 +156,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range, return 0; } -static unsigned int of_bus_default_get_flags(const u32 *addr) +static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags) { + if (flags) + return flags; return IORESOURCE_MEM; } @@ -167,7 +169,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr) static int of_bus_pci_match(struct device_node *np) { - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { const char *model = of_get_property(np, "model", NULL); if (model && !strcmp(model, "SUNW,simba")) @@ -198,7 +200,7 @@ static int of_bus_simba_match(struct device_node *np) /* Treat PCI busses lacking ranges property just like * simba. */ - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { if (!of_find_property(np, "ranges", NULL)) return 1; } @@ -249,17 +251,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range, return 0; } -static unsigned int of_bus_pci_get_flags(const u32 *addr) +static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) { - unsigned int flags = 0; u32 w = addr[0]; + /* For PCI, we override whatever child busses may have used. */ + flags = 0; switch((w >> 24) & 0x03) { case 0x01: flags |= IORESOURCE_IO; + break; + case 0x02: /* 32 bits */ case 0x03: /* 64 bits */ flags |= IORESOURCE_MEM; + break; } if (w & 0x40000000) flags |= IORESOURCE_PREFETCH; @@ -423,7 +429,7 @@ static int __init use_1to1_mapping(struct device_node *pp) * it lacks a ranges property, and this will include * cases like Simba. */ - if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex")) + if (!strcmp(pp->name, "pci")) return 0; return 1; @@ -478,10 +484,10 @@ static void __init build_device_resources(struct of_device *op, int pna, pns; size = of_read_addr(reg + na, ns); - flags = bus->get_flags(reg); - memcpy(addr, reg, na * 4); + flags = bus->get_flags(addr, 0); + if (use_1to1_mapping(pp)) { result = of_read_addr(addr, na); goto build_res; @@ -506,6 +512,8 @@ static void __init build_device_resources(struct of_device *op, dna, dns, pna)) break; + flags = pbus->get_flags(addr, flags); + dna = pna; dns = pns; dbus = pbus; @@ -706,8 +714,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op, break; } } else { - if (!strcmp(pp->type, "pci") || - !strcmp(pp->type, "pciex")) { + if (!strcmp(pp->name, "pci")) { unsigned int this_orig_irq = irq; irq = pci_irq_swizzle(dp, pp, irq); diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 55096195458..80dad76f8b8 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + if (!strcmp(node->name, "pci")) { /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index ef5fe29202c..f85b6bebb0b 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm { unsigned long csr_reg, csr, csr_error_bits; irqreturn_t ret = IRQ_NONE; - u16 stat; + u16 stat, *addr; if (is_pbm_a) { csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL; @@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm printk("%s: PCI SERR signal asserted.\n", pbm->name); ret = IRQ_HANDLED; } - pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat); + addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno, + 0, PCI_STATUS); + pci_config_read16(addr, &stat); if (stat & (PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_TARGET_ABORT | @@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm PCI_STATUS_SIG_SYSTEM_ERROR)) { printk("%s: PCI bus error, PCI_STATUS[%04x]\n", pbm->name, stat); - pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff); + pci_config_write16(addr, 0xffff); ret = IRQ_HANDLED; } return ret; @@ -744,16 +746,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm) * the second will just error out since we do not pass in * IRQF_SHARED. */ - err = request_irq(op->irqs[1], psycho_ue_intr, 0, + err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED, "PSYCHO_UE", pbm); - err = request_irq(op->irqs[2], psycho_ce_intr, 0, + err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED, "PSYCHO_CE", pbm); /* This one, however, ought not to fail. We can just warn * about it since the system can still operate properly even * if this fails. */ - err = request_irq(op->irqs[0], psycho_pcierr_intr, 0, + err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED, "PSYCHO_PCIERR", pbm); if (err) printk(KERN_WARNING "%s: Could not register PCIERR, " diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 3c048ac4e63..7151513f156 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino) return PSYCHO_IMAP_B_SLOT0 + (slot * 8); } -#define PSYCHO_IMAP_SCSI 0x1000UL -#define PSYCHO_IMAP_ETH 0x1008UL -#define PSYCHO_IMAP_BPP 0x1010UL -#define PSYCHO_IMAP_AU_REC 0x1018UL -#define PSYCHO_IMAP_AU_PLAY 0x1020UL -#define PSYCHO_IMAP_PFAIL 0x1028UL -#define PSYCHO_IMAP_KMS 0x1030UL -#define PSYCHO_IMAP_FLPY 0x1038UL -#define PSYCHO_IMAP_SHW 0x1040UL -#define PSYCHO_IMAP_KBD 0x1048UL -#define PSYCHO_IMAP_MS 0x1050UL -#define PSYCHO_IMAP_SER 0x1058UL -#define PSYCHO_IMAP_TIM0 0x1060UL -#define PSYCHO_IMAP_TIM1 0x1068UL -#define PSYCHO_IMAP_UE 0x1070UL -#define PSYCHO_IMAP_CE 0x1078UL -#define PSYCHO_IMAP_A_ERR 0x1080UL -#define PSYCHO_IMAP_B_ERR 0x1088UL -#define PSYCHO_IMAP_PMGMT 0x1090UL -#define PSYCHO_IMAP_GFX 0x1098UL -#define PSYCHO_IMAP_EUPA 0x10a0UL - -static unsigned long __psycho_onboard_imap_off[] = { -/*0x20*/ PSYCHO_IMAP_SCSI, -/*0x21*/ PSYCHO_IMAP_ETH, -/*0x22*/ PSYCHO_IMAP_BPP, -/*0x23*/ PSYCHO_IMAP_AU_REC, -/*0x24*/ PSYCHO_IMAP_AU_PLAY, -/*0x25*/ PSYCHO_IMAP_PFAIL, -/*0x26*/ PSYCHO_IMAP_KMS, -/*0x27*/ PSYCHO_IMAP_FLPY, -/*0x28*/ PSYCHO_IMAP_SHW, -/*0x29*/ PSYCHO_IMAP_KBD, -/*0x2a*/ PSYCHO_IMAP_MS, -/*0x2b*/ PSYCHO_IMAP_SER, -/*0x2c*/ PSYCHO_IMAP_TIM0, -/*0x2d*/ PSYCHO_IMAP_TIM1, -/*0x2e*/ PSYCHO_IMAP_UE, -/*0x2f*/ PSYCHO_IMAP_CE, -/*0x30*/ PSYCHO_IMAP_A_ERR, -/*0x31*/ PSYCHO_IMAP_B_ERR, -/*0x32*/ PSYCHO_IMAP_PMGMT, -/*0x33*/ PSYCHO_IMAP_GFX, -/*0x34*/ PSYCHO_IMAP_EUPA, -}; +#define PSYCHO_OBIO_IMAP_BASE 0x1000UL + #define PSYCHO_ONBOARD_IRQ_BASE 0x20 -#define PSYCHO_ONBOARD_IRQ_LAST 0x34 #define psycho_onboard_imap_offset(__ino) \ - __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE] + (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3)) #define PSYCHO_ICLR_A_SLOT0 0x1400UL #define PSYCHO_ICLR_SCSI 0x1800UL @@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp, imap_off = psycho_pcislot_imap_offset(ino); } else { /* Onboard device */ - if (ino > PSYCHO_ONBOARD_IRQ_LAST) { - prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino); - prom_halt(); - } imap_off = psycho_onboard_imap_offset(ino); } @@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2) #define SABRE_IMAP_A_SLOT0 0x0c00UL #define SABRE_IMAP_B_SLOT0 0x0c20UL -#define SABRE_IMAP_SCSI 0x1000UL -#define SABRE_IMAP_ETH 0x1008UL -#define SABRE_IMAP_BPP 0x1010UL -#define SABRE_IMAP_AU_REC 0x1018UL -#define SABRE_IMAP_AU_PLAY 0x1020UL -#define SABRE_IMAP_PFAIL 0x1028UL -#define SABRE_IMAP_KMS 0x1030UL -#define SABRE_IMAP_FLPY 0x1038UL -#define SABRE_IMAP_SHW 0x1040UL -#define SABRE_IMAP_KBD 0x1048UL -#define SABRE_IMAP_MS 0x1050UL -#define SABRE_IMAP_SER 0x1058UL -#define SABRE_IMAP_UE 0x1070UL -#define SABRE_IMAP_CE 0x1078UL -#define SABRE_IMAP_PCIERR 0x1080UL -#define SABRE_IMAP_GFX 0x1098UL -#define SABRE_IMAP_EUPA 0x10a0UL #define SABRE_ICLR_A_SLOT0 0x1400UL #define SABRE_ICLR_B_SLOT0 0x1480UL #define SABRE_ICLR_SCSI 0x1800UL @@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino) return SABRE_IMAP_B_SLOT0 + (slot * 8); } -static unsigned long __sabre_onboard_imap_off[] = { -/*0x20*/ SABRE_IMAP_SCSI, -/*0x21*/ SABRE_IMAP_ETH, -/*0x22*/ SABRE_IMAP_BPP, -/*0x23*/ SABRE_IMAP_AU_REC, -/*0x24*/ SABRE_IMAP_AU_PLAY, -/*0x25*/ SABRE_IMAP_PFAIL, -/*0x26*/ SABRE_IMAP_KMS, -/*0x27*/ SABRE_IMAP_FLPY, -/*0x28*/ SABRE_IMAP_SHW, -/*0x29*/ SABRE_IMAP_KBD, -/*0x2a*/ SABRE_IMAP_MS, -/*0x2b*/ SABRE_IMAP_SER, -/*0x2c*/ 0 /* reserved */, -/*0x2d*/ 0 /* reserved */, -/*0x2e*/ SABRE_IMAP_UE, -/*0x2f*/ SABRE_IMAP_CE, -/*0x30*/ SABRE_IMAP_PCIERR, -/*0x31*/ 0 /* reserved */, -/*0x32*/ 0 /* reserved */, -/*0x33*/ SABRE_IMAP_GFX, -/*0x34*/ SABRE_IMAP_EUPA, -}; -#define SABRE_ONBOARD_IRQ_BASE 0x20 -#define SABRE_ONBOARD_IRQ_LAST 0x30 +#define SABRE_OBIO_IMAP_BASE 0x1000UL +#define SABRE_ONBOARD_IRQ_BASE 0x20 #define sabre_onboard_imap_offset(__ino) \ - __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE] + (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3)) #define sabre_iclr_offset(ino) \ ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \ @@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp, imap_off = sabre_pcislot_imap_offset(ino); } else { /* onboard device */ - if (ino > SABRE_ONBOARD_IRQ_LAST) { - prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino); - prom_halt(); - } imap_off = sabre_onboard_imap_offset(ino); } diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index bd578cc4856..10306e476e3 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -443,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 36 * sizeof(u64), + .n = 36, .size = sizeof(u64), .align = sizeof(u64), .get = genregs64_get, .set = genregs64_set }, @@ -455,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 35 * sizeof(u64), + .n = 35, .size = sizeof(u64), .align = sizeof(u64), .get = fpregs64_get, .set = fpregs64_set }, @@ -801,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 38 * sizeof(u32), + .n = 38, .size = sizeof(u32), .align = sizeof(u32), .get = genregs32_get, .set = genregs32_set }, @@ -817,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 99 * sizeof(u32), + .n = 99, .size = sizeof(u32), .align = sizeof(u32), .get = fpregs32_get, .set = fpregs32_set }, diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 743ccad61c6..2be166c544c 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m) i, cpu_data(i).clock_tick); } -static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock); - extern void setup_sparc64_timer(void); static volatile unsigned long callin_flag = 0; @@ -120,9 +118,9 @@ void __cpuinit smp_callin(void) while (!cpu_isset(cpuid, smp_commenced_mask)) rmb(); - spin_lock(&call_lock); + ipi_call_lock(); cpu_set(cpuid, cpu_online_map); - spin_unlock(&call_lock); + ipi_call_unlock(); /* idle thread is expected to have preempt disabled */ preempt_disable(); @@ -1305,10 +1303,6 @@ int __cpu_disable(void) c->core_id = 0; c->proc_id = -1; - spin_lock(&call_lock); - cpu_clear(cpu, cpu_online_map); - spin_unlock(&call_lock); - smp_wmb(); /* Make sure no interrupts point to this cpu. */ @@ -1318,6 +1312,10 @@ int __cpu_disable(void) mdelay(1); local_irq_disable(); + ipi_call_lock(); + cpu_clear(cpu, cpu_online_map); + ipi_call_unlock(); + return 0; } diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 3d924121c79..c824df13f58 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/sched.h> +#include <linux/linkage.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/smp.h> @@ -2453,7 +2454,7 @@ struct trap_per_cpu trap_block[NR_CPUS]; /* This can get invoked before sched_init() so play it super safe * and use hard_smp_processor_id(). */ -void init_cur_cpu_trap(struct thread_info *t) +void notrace init_cur_cpu_trap(struct thread_info *t) { int cpu = hard_smp_processor_id(); struct trap_per_cpu *p = &trap_block[cpu]; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index b4aeb0f696d..a41df7bef03 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1843,7 +1843,7 @@ static int pavail_rescan_ents __initdata; * memory list again, and make sure it provides at least as much * memory as 'pavail' does. */ -static void setup_valid_addr_bitmap_from_pavail(void) +static void __init setup_valid_addr_bitmap_from_pavail(void) { int i; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ed92864d132..97f0d2b6dc0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -29,6 +29,7 @@ config X86 select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER + select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -1020,7 +1021,7 @@ config HAVE_ARCH_ALLOC_REMAP config ARCH_FLATMEM_ENABLE def_bool y - depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA + depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -1036,7 +1037,7 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SPARSEMEM_ENABLE def_bool y - depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) + depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH select SPARSEMEM_STATIC if X86_32 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 @@ -1117,10 +1118,10 @@ config MTRR You can safely say Y even if your machine doesn't have MTRRs, you'll just add about 9 KB to your kernel. - See <file:Documentation/mtrr.txt> for more information. + See <file:Documentation/x86/mtrr.txt> for more information. config MTRR_SANITIZER - bool + def_bool y prompt "MTRR cleanup support" depends on MTRR help @@ -1131,7 +1132,7 @@ config MTRR_SANITIZER The largest mtrr entry size for a continous block can be set with mtrr_chunk_size. - If unsure, say N. + If unsure, say Y. config MTRR_SANITIZER_ENABLE_DEFAULT int "MTRR cleanup enable value (0-1)" @@ -1191,7 +1192,6 @@ config IRQBALANCE config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS help This kernel feature is useful for number crunching applications that may need to compute untrusted bytecode during their @@ -1199,7 +1199,7 @@ config SECCOMP the process as file descriptors supporting the read/write syscalls, it's possible to isolate those applications in their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled and the task is only allowed to execute a few safe syscalls defined by each seccomp mode. @@ -1356,14 +1356,14 @@ config PHYSICAL_ALIGN Don't change this unless you know what you are doing. config HOTPLUG_CPU - bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG && !X86_VOYAGER ---help--- - Say Y here to experiment with turning CPUs off and on, and to - enable suspend on SMP systems. CPUs can be controlled through - /sys/devices/system/cpu. - Say N if you want to disable CPU hotplug and don't need to - suspend. + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu. + ( Note: power management support will enable this option + automatically on SMP systems. ) + Say N if you want to disable CPU hotplug. config COMPAT_VDSO def_bool y @@ -1378,6 +1378,51 @@ config COMPAT_VDSO If unsure, say Y. +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (i.e. non-embedded) + should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + help + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + default n + depends on CMDLINE_BOOL + help + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + endmenu config ARCH_ENABLE_MEMORY_HOTPLUG @@ -1773,7 +1818,7 @@ config COMPAT_FOR_U64_ALIGNMENT config SYSVIPC_COMPAT def_bool y - depends on X86_64 && COMPAT && SYSVIPC + depends on COMPAT && SYSVIPC endmenu diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2c518fbc52e..60a85768cfc 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -382,14 +382,17 @@ config X86_OOSTORE # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. # Furthermore, AMD chips prefer a totally different sequence of NOPs -# (which work on all CPUs). As a result, disallow these if we're -# compiling X86_GENERIC but not X86_64 (these NOPs do work on all -# x86-64 capable chips); the list of processors in the right-hand clause -# are the cores that benefit from this optimization. +# (which work on all CPUs). In addition, it looks like Virtual PC +# does not understand them. +# +# As a result, disallow these if we're not compiling for X86_64 (these +# NOPs do work on all x86-64 capable chips); the list of processors in +# the right-hand clause are the cores that benefit from this optimization. # config X86_P6_NOP def_bool y - depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC) + depends on X86_64 + depends on (MCORE2 || MPENTIUM4 || MPSC) config X86_TSC def_bool y @@ -415,3 +418,21 @@ config X86_MINIMUM_CPU_FAMILY config X86_DEBUGCTLMSR def_bool y depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) + +config X86_DS + bool "Debug Store support" + default y + help + Add support for Debug Store. + This allows the kernel to provide a memory buffer to the hardware + to store various profiling and tracing events. + +config X86_PTRACE_BTS + bool "ptrace interface to Branch Trace Store" + default y + depends on (X86_DS && X86_DEBUGCTLMSR) + help + Add a ptrace interface to allow collecting an execution trace + of the traced task. + This collects control flow changes in a (cyclic) buffer and allows + debuggers to fill in the gaps and show an execution trace of the debuggee. diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index ba7736cf2ec..29c5fbf0839 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -137,14 +137,15 @@ relocated: */ movl output_len(%ebx), %eax pushl %eax + # push arguments for decompress_kernel: pushl %ebp # output address movl input_len(%ebx), %eax pushl %eax # input_len leal input_data(%ebx), %eax pushl %eax # input_data leal boot_heap(%ebx), %eax - pushl %eax # heap area as third argument - pushl %esi # real mode pointer as second arg + pushl %eax # heap area + pushl %esi # real mode pointer call decompress_kernel addl $20, %esp popl %ecx diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 9fea7370647..5780d361105 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -16,7 +16,7 @@ */ #undef CONFIG_PARAVIRT #ifdef CONFIG_X86_32 -#define _ASM_DESC_H_ 1 +#define ASM_X86__DESC_H 1 #endif #ifdef CONFIG_X86_64 @@ -27,7 +27,7 @@ #include <linux/linkage.h> #include <linux/screen_info.h> #include <linux/elf.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/page.h> #include <asm/boot.h> #include <asm/bootparam.h> @@ -251,7 +251,7 @@ static void __putstr(int error, const char *s) y--; } } else { - vidmem [(x + cols * y) * 2] = c; + vidmem[(x + cols * y) * 2] = c; if (++x >= cols) { x = 0; if (++y >= lines) { @@ -277,7 +277,8 @@ static void *memset(void *s, int c, unsigned n) int i; char *ss = s; - for (i = 0; i < n; i++) ss[i] = c; + for (i = 0; i < n; i++) + ss[i] = c; return s; } @@ -287,7 +288,8 @@ static void *memcpy(void *dest, const void *src, unsigned n) const char *s = src; char *d = dest; - for (i = 0; i < n; i++) d[i] = s[i]; + for (i = 0; i < n; i++) + d[i] = s[i]; return dest; } diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index a1310c52fc0..857e492c571 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -492,7 +492,7 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) continue; } sh_symtab = sec_symtab->symtab; - sym_strtab = sec->link->strtab; + sym_strtab = sec_symtab->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { Elf32_Rel *rel; Elf32_Sym *sym; diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c index 4b9ae7c5674..4d3ff037201 100644 --- a/arch/x86/boot/cpucheck.c +++ b/arch/x86/boot/cpucheck.c @@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] = { REQUIRED_MASK0, REQUIRED_MASK1, - REQUIRED_MASK2, - REQUIRED_MASK3, + 0, /* REQUIRED_MASK2 not implemented in this file */ + 0, /* REQUIRED_MASK3 not implemented in this file */ REQUIRED_MASK4, - REQUIRED_MASK5, + 0, /* REQUIRED_MASK5 not implemented in this file */ REQUIRED_MASK6, - REQUIRED_MASK7, + 0, /* REQUIRED_MASK7 not implemented in this file */ }; #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a)) diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index af86e431acf..b993062e9a5 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -30,7 +30,6 @@ SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ /* to be loaded */ ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ -SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */ #ifndef SVGA_MODE #define SVGA_MODE ASK_VGA diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 4d73f53287b..ef9a52005ec 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:59:02 2008 +# Linux kernel version: 2.6.27-rc5 +# Wed Sep 3 17:23:09 2008 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y -CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -53,6 +53,7 @@ CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup @@ -82,6 +83,7 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_NS=y # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set @@ -105,7 +107,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -132,27 +134,35 @@ CONFIG_MARKERS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -176,25 +186,23 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_X86_RDC321X is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set -# CONFIG_M686 is not set +CONFIG_M686=y # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set @@ -213,30 +221,30 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -CONFIG_MCORE2=y +# CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set -# CONFIG_X86_GENERIC is not set +CONFIG_X86_GENERIC=y CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_XADD=y +# CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y -CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set -CONFIG_NR_CPUS=4 -# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y @@ -247,8 +255,9 @@ CONFIG_X86_IO_APIC=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set +CONFIG_X86_REBOOTFIXUPS=y +CONFIG_MICROCODE=y +CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NOHIGHMEM is not set @@ -256,32 +265,28 @@ CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - -# -# Memory hotplug is currently incompatible with Software Suspend -# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -# CONFIG_HIGHPTE is not set +CONFIG_HIGHPTE=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_X86_PAT is not set +# CONFIG_MTRR_SANITIZER is not set +CONFIG_X86_PAT=y CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y @@ -293,6 +298,7 @@ CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y +# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 @@ -312,6 +318,7 @@ CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" @@ -337,6 +344,7 @@ CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y @@ -395,8 +403,8 @@ CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y # CONFIG_PCI_GOOLPC is not set +CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y @@ -448,10 +456,6 @@ CONFIG_HOTPLUG_PCI=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y - -# -# Networking -# CONFIG_NET=y # @@ -475,7 +479,10 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y @@ -618,7 +625,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -680,28 +686,19 @@ CONFIG_FIB_RULES=y CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y # # Rate control algorithm selection # +CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -717,6 +714,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set @@ -749,6 +748,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set @@ -760,10 +760,12 @@ CONFIG_MISC_DEVICES=y # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set # CONFIG_MSI_LAPTOP is not set +# CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -802,12 +804,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=y # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -842,7 +845,7 @@ CONFIG_PATA_AMD=y # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set +CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set @@ -852,7 +855,7 @@ CONFIG_PATA_AMD=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set +CONFIG_PATA_MPIIX=y CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set @@ -871,6 +874,7 @@ CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -894,13 +898,16 @@ CONFIG_DM_ZERO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -910,7 +917,23 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -943,10 +966,10 @@ CONFIG_FORCEDETH=y CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set +CONFIG_NE2K_PCI=y # CONFIG_8139CP is not set CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set @@ -961,25 +984,24 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set +CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set +CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y # CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -# CONFIG_BNX2 is not set +CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -1019,13 +1041,14 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set -# CONFIG_IWLWIFI is not set +# CONFIG_ATH9K is not set # CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWL4965 is not set +# CONFIG_IWLAGN is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set @@ -1105,6 +1128,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set @@ -1139,12 +1163,14 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_APANEL is not set @@ -1173,6 +1199,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -1223,8 +1250,8 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_INTEL=y +CONFIG_HW_RANDOM_AMD=y CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y CONFIG_NVRAM=y @@ -1245,7 +1272,6 @@ CONFIG_NVRAM=y # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set @@ -1254,43 +1280,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1299,6 +1346,8 @@ CONFIG_I2C_I801=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set @@ -1360,8 +1409,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1372,6 +1423,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -1418,7 +1470,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1463,6 +1514,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y @@ -1470,6 +1522,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set +# CONFIG_BACKLIGHT_MBP_NVIDIA is not set # # Display device support @@ -1489,15 +1542,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1515,20 +1560,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1603,36 +1642,14 @@ CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1668,6 +1685,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1691,6 +1709,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1712,6 +1731,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y @@ -1720,7 +1740,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1733,7 +1752,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1750,6 +1768,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1759,7 +1778,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_CLEVO_MAIL is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1805,6 +1826,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1837,11 +1859,13 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y -# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=y # # File systems @@ -1920,14 +1944,27 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -2001,9 +2038,9 @@ CONFIG_NLS_UTF8=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -2033,6 +2070,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -2043,23 +2081,32 @@ CONFIG_FRAME_POINTER=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SYSPROF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set -# CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set +CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +# CONFIG_MMIOTRACE is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2071,6 +2118,7 @@ CONFIG_IO_DELAY_0X80=y CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y # # Security options @@ -2080,7 +2128,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 @@ -2141,6 +2188,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -2151,7 +2202,7 @@ CONFIG_CRYPTO_SHA1=y # Ciphers # CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_AES_586=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set @@ -2193,6 +2244,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index a4045242962..e620ea6e2a7 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:59:57 2008 +# Linux kernel version: 2.6.27-rc5 +# Wed Sep 3 17:13:39 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y -CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -53,6 +53,7 @@ CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup @@ -82,6 +83,7 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_NS=y # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set @@ -105,7 +107,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -132,25 +134,33 @@ CONFIG_MARKERS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -175,20 +185,15 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set -CONFIG_MEMTEST_BOOTPARAM=y -CONFIG_MEMTEST_BOOTPARAM_VALUE=0 +# CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -213,18 +218,16 @@ CONFIG_MEMTEST_BOOTPARAM_VALUE=0 # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -CONFIG_MCORE2=y -# CONFIG_GENERIC_CPU is not set +# CONFIG_MCORE2 is not set +CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=64 -CONFIG_X86_INTERNODE_CACHE_BYTES=64 +CONFIG_X86_L1_CACHE_BYTES=128 +CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_P6_NOP=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y @@ -234,10 +237,11 @@ CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_AMD_IOMMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y -CONFIG_NR_CPUS=4 -# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y @@ -246,7 +250,8 @@ CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_MCE is not set # CONFIG_I8K is not set -# CONFIG_MICROCODE is not set +CONFIG_MICROCODE=y +CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NUMA=y @@ -281,7 +286,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y -# CONFIG_X86_PAT is not set +# CONFIG_MTRR_SANITIZER is not set +CONFIG_X86_PAT=y CONFIG_EFI=y CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set @@ -313,6 +319,7 @@ CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" @@ -339,6 +346,7 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y @@ -437,10 +445,6 @@ CONFIG_IA32_EMULATION=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y - -# -# Networking -# CONFIG_NET=y # @@ -464,7 +468,10 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y @@ -607,7 +614,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -669,28 +675,19 @@ CONFIG_FIB_RULES=y CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y # # Rate control algorithm selection # +CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -706,6 +703,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set @@ -738,6 +737,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set @@ -748,10 +748,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set +# CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_SGI_XP is not set +# CONFIG_HP_ILO is not set +# CONFIG_SGI_GRU is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -790,12 +794,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=y # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -857,6 +862,7 @@ CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -880,13 +886,16 @@ CONFIG_DM_ZERO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -896,7 +905,23 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -940,16 +965,15 @@ CONFIG_8139TOO_PIO=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -965,6 +989,7 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -1003,13 +1028,14 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set -# CONFIG_IWLWIFI is not set +# CONFIG_ATH9K is not set # CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWL4965 is not set +# CONFIG_IWLAGN is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set @@ -1088,6 +1114,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set @@ -1122,12 +1149,14 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_APANEL is not set @@ -1155,6 +1184,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -1222,7 +1252,6 @@ CONFIG_NVRAM=y # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set @@ -1231,42 +1260,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1275,6 +1325,8 @@ CONFIG_I2C_I801=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set @@ -1335,8 +1387,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1347,6 +1401,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -1387,7 +1442,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1430,6 +1484,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y @@ -1437,6 +1492,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set +# CONFIG_BACKLIGHT_MBP_NVIDIA is not set # # Display device support @@ -1456,15 +1512,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1482,20 +1530,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1568,36 +1610,14 @@ CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1633,6 +1653,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1656,6 +1677,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1677,6 +1699,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y @@ -1685,7 +1708,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1698,7 +1720,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1715,6 +1736,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1724,7 +1746,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_CLEVO_MAIL is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1770,6 +1794,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1802,11 +1827,13 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y -# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=y # # File systems @@ -1886,14 +1913,27 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1967,9 +2007,9 @@ CONFIG_NLS_UTF8=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1998,6 +2038,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -2008,11 +2049,20 @@ CONFIG_FRAME_POINTER=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SYSPROF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set -# CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set +CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -2023,8 +2073,8 @@ CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m -CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set +# CONFIG_MMIOTRACE is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2036,6 +2086,7 @@ CONFIG_IO_DELAY_0X80=y CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y # # Security options @@ -2045,7 +2096,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 @@ -2106,6 +2156,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -2155,6 +2209,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index a0e1dbe67dc..127ec3f0721 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -85,8 +85,10 @@ static void dump_thread32(struct pt_regs *regs, struct user32 *dump) dump->regs.ax = regs->ax; dump->regs.ds = current->thread.ds; dump->regs.es = current->thread.es; - asm("movl %%fs,%0" : "=r" (fs)); dump->regs.fs = fs; - asm("movl %%gs,%0" : "=r" (gs)); dump->regs.gs = gs; + savesegment(fs, fs); + dump->regs.fs = fs; + savesegment(gs, gs); + dump->regs.gs = gs; dump->regs.orig_ax = regs->orig_ax; dump->regs.ip = regs->ip; dump->regs.cs = regs->cs; @@ -430,8 +432,9 @@ beyond_if: current->mm->start_stack = (unsigned long)create_aout_tables((char __user *)bprm->p, bprm); /* start thread */ - asm volatile("movl %0,%%fs" :: "r" (0)); \ - asm volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS)); + loadsegment(fs, 0); + loadsegment(ds, __USER32_DS); + loadsegment(es, __USER32_DS); load_gs_index(0); (regs)->ip = ex.a_entry; (regs)->sp = current->mm->start_stack; diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index 20af4c79579..f1a2ac777fa 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -206,7 +206,7 @@ struct rt_sigframe { unsigned int cur; \ unsigned short pre; \ err |= __get_user(pre, &sc->seg); \ - asm volatile("movl %%" #seg ",%0" : "=r" (cur)); \ + savesegment(seg, cur); \ pre |= mask; \ if (pre != cur) loadsegment(seg, pre); } @@ -235,7 +235,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, */ err |= __get_user(gs, &sc->gs); gs |= 3; - asm("movl %%gs,%0" : "=r" (oldgs)); + savesegment(gs, oldgs); if (gs != oldgs) load_gs_index(gs); @@ -355,14 +355,13 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, { int tmp, err = 0; - tmp = 0; - __asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp)); + savesegment(gs, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->gs); - __asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp)); + savesegment(fs, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->fs); - __asm__("movl %%ds,%0" : "=r"(tmp): "0"(tmp)); + savesegment(ds, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->ds); - __asm__("movl %%es,%0" : "=r"(tmp): "0"(tmp)); + savesegment(es, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->es); err |= __put_user((u32)regs->di, &sc->di); @@ -498,8 +497,8 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, regs->dx = 0; regs->cx = 0; - asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); - asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); + loadsegment(ds, __USER32_DS); + loadsegment(es, __USER32_DS); regs->cs = __USER32_CS; regs->ss = __USER32_DS; @@ -591,8 +590,8 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->dx = (unsigned long) &frame->info; regs->cx = (unsigned long) &frame->uc; - asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); - asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); + loadsegment(ds, __USER32_DS); + loadsegment(es, __USER32_DS); regs->cs = __USER32_CS; regs->ss = __USER32_DS; diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c index d3c64088b98..beda4232ce6 100644 --- a/arch/x86/ia32/sys_ia32.c +++ b/arch/x86/ia32/sys_ia32.c @@ -556,15 +556,6 @@ asmlinkage long sys32_rt_sigqueueinfo(int pid, int sig, return ret; } -/* These are here just in case some old ia32 binary calls it. */ -asmlinkage long sys32_pause(void) -{ - current->state = TASK_INTERRUPTIBLE; - schedule(); - return -ERESTARTNOHAND; -} - - #ifdef CONFIG_SYSCTL_SYSCALL struct sysctl_ia32 { unsigned int name; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index bfd10fd211c..e5032d7b391 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -58,7 +58,6 @@ EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 #include <asm/proto.h> -#include <asm/genapic.h> #else /* X86 */ @@ -97,8 +96,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #warning ACPI uses CMPXCHG, i486 and later hardware #endif -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - /* -------------------------------------------------------------------------- Boot-time Configuration -------------------------------------------------------------------------- */ @@ -160,6 +157,8 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size) struct acpi_mcfg_allocation *pci_mmcfg_config; int pci_mmcfg_config_num; +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) { if (!strcmp(mcfg->header.oem_id, "SGI")) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 2763cb37b55..fb04e49776b 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { extern char __vsyscall_0; const unsigned char *const *find_nop_table(void) { - return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL || - boot_cpu_data.x86 < 6 ? k8_nops : p6_nops; + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return k8_nops; } #else /* CONFIG_X86_64 */ -static const struct nop { - int cpuid; - const unsigned char *const *noptable; -} noptypes[] = { - { X86_FEATURE_K8, k8_nops }, - { X86_FEATURE_K7, k7_nops }, - { X86_FEATURE_P4, p6_nops }, - { X86_FEATURE_P3, p6_nops }, - { -1, NULL } -}; - const unsigned char *const *find_nop_table(void) { - const unsigned char *const *noptable = intel_nops; - int i; - - for (i = 0; noptypes[i].cpuid >= 0; i++) { - if (boot_cpu_has(noptypes[i].cpuid)) { - noptable = noptypes[i].noptable; - break; - } - } - return noptable; + if (boot_cpu_has(X86_FEATURE_K8)) + return k8_nops; + else if (boot_cpu_has(X86_FEATURE_K7)) + return k7_nops; + else if (boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return intel_nops; } #endif /* CONFIG_X86_64 */ @@ -241,25 +231,25 @@ static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end) continue; if (*ptr > text_end) continue; - text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */ + /* turn DS segment override prefix into lock prefix */ + text_poke(*ptr, ((unsigned char []){0xf0}), 1); }; } static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end) { u8 **ptr; - char insn[1]; if (noreplace_smp) return; - add_nops(insn, 1); for (ptr = start; ptr < end; ptr++) { if (*ptr < text) continue; if (*ptr > text_end) continue; - text_poke(*ptr, insn, 1); + /* turn lock prefix into DS segment override prefix */ + text_poke(*ptr, ((unsigned char []){0x3E}), 1); }; } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 69b4d060b21..042fdc27bc9 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -101,10 +101,10 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) */ static int iommu_completion_wait(struct amd_iommu *iommu) { - int ret, ready = 0; + int ret = 0, ready = 0; unsigned status = 0; struct iommu_cmd cmd; - unsigned long i = 0; + unsigned long flags, i = 0; memset(&cmd, 0, sizeof(cmd)); cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; @@ -112,10 +112,12 @@ static int iommu_completion_wait(struct amd_iommu *iommu) iommu->need_sync = 0; - ret = iommu_queue_command(iommu, &cmd); + spin_lock_irqsave(&iommu->lock, flags); + + ret = __iommu_queue_command(iommu, &cmd); if (ret) - return ret; + goto out; while (!ready && (i < EXIT_LOOP_COUNT)) { ++i; @@ -130,6 +132,8 @@ static int iommu_completion_wait(struct amd_iommu *iommu) if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); +out: + spin_unlock_irqrestore(&iommu->lock, flags); return 0; } @@ -140,6 +144,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu) static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) { struct iommu_cmd cmd; + int ret; BUG_ON(iommu == NULL); @@ -147,9 +152,11 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); cmd.data[0] = devid; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* @@ -159,6 +166,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, u64 address, u16 domid, int pde, int s) { struct iommu_cmd cmd; + int ret; memset(&cmd, 0, sizeof(cmd)); address &= PAGE_MASK; @@ -171,9 +179,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 44e21826db1..9a32b37ee2e 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -455,11 +455,11 @@ out: force_iommu || valid_agp || fallback_aper_force) { - printk(KERN_ERR + printk(KERN_INFO "Your BIOS doesn't leave a aperture memory hole\n"); - printk(KERN_ERR + printk(KERN_INFO "Please enable the IOMMU option in the BIOS setup\n"); - printk(KERN_ERR + printk(KERN_INFO "This costs you %d MB of RAM\n", 32 << fallback_aper_order); diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 9ee24e6bc4b..5145a6e72bb 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,12 +228,12 @@ #include <linux/suspend.h> #include <linux/kthread.h> #include <linux/jiffies.h> -#include <linux/smp_lock.h> #include <asm/system.h> #include <asm/uaccess.h> #include <asm/desc.h> #include <asm/i8253.h> +#include <asm/olpc.h> #include <asm/paravirt.h> #include <asm/reboot.h> @@ -2217,7 +2217,7 @@ static int __init apm_init(void) dmi_check_system(apm_dmi_table); - if (apm_info.bios.version == 0 || paravirt_enabled()) { + if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) { printk(KERN_INFO "apm: BIOS not found.\n"); return -ENODEV; } diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index aa89387006f..505543a75a5 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -22,7 +22,7 @@ #define __NO_STUBS 1 #undef __SYSCALL -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H #define __SYSCALL(nr, sym) [nr] = 1, static char syscalls[] = { #include <asm/unistd.h> diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c index c639bd55391..fdd585f9c53 100644 --- a/arch/x86/kernel/bios_uv.c +++ b/arch/x86/kernel/bios_uv.c @@ -25,11 +25,11 @@ x86_bios_strerror(long status) { const char *str; switch (status) { - case 0: str = "Call completed without error"; break; - case -1: str = "Not implemented"; break; - case -2: str = "Invalid argument"; break; - case -3: str = "Call completed with error"; break; - default: str = "Unknown BIOS status code"; break; + case 0: str = "Call completed without error"; break; + case -1: str = "Not implemented"; break; + case -2: str = "Invalid argument"; break; + case -3: str = "Call completed with error"; break; + default: str = "Unknown BIOS status code"; break; } return str; } diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index cae9cabc303..18514ed2610 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) if (c->x86_power & (1<<8)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); } + + /* Set MTRR capability flag if appropriate */ + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_cpu_cap(c, X86_FEATURE_K6_MTRR); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) @@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) mbytes); } - /* Set MTRR capability flag if appropriate */ - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); break; } diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index e0f45edd6a5..a0534c04d38 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -314,6 +314,16 @@ enum { EAMD3D = 1<<20, }; +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 5: + /* Emulate MTRRs using Centaur's MCR. */ + set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); + break; + } +} + static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { @@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, .c_init = init_centaur, .c_size_cache = centaur_size_cache, }; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 80ab20d4fa3..4e456bd955b 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -13,6 +13,7 @@ #include <asm/mtrr.h> #include <asm/mce.h> #include <asm/pat.h> +#include <asm/asm.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> #include <asm/apic.h> @@ -334,11 +335,24 @@ static void __init early_cpu_detect(void) get_cpu_vendor(c, 1); + early_get_cap(c); + if (c->x86_vendor != X86_VENDOR_UNKNOWN && cpu_devs[c->x86_vendor]->c_early_init) cpu_devs[c->x86_vendor]->c_early_init(c); +} - early_get_cap(c); +/* + * The NOPL instruction is supposed to exist on all CPUs with + * family >= 6; unfortunately, that's not true in practice because + * of early VIA chips and (more importantly) broken virtualizers that + * are not easy to detect. In the latter case it doesn't even *fail* + * reliably, so probing for it doesn't even work. Disable it completely + * unless we can find a reliable way to detect all the broken cases. + */ +static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) +{ + clear_cpu_cap(c, X86_FEATURE_NOPL); } static void __cpuinit generic_identify(struct cpuinfo_x86 *c) @@ -395,8 +409,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c) } init_scattered_cpuid_features(c); + detect_nopl(c); } - } static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index dd6e3f15017..305b465889b 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -18,6 +18,7 @@ #include <asm/mtrr.h> #include <asm/mce.h> #include <asm/pat.h> +#include <asm/asm.h> #include <asm/numa.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> @@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void) } } +/* + * The NOPL instruction is supposed to exist on all CPUs with + * family >= 6, unfortunately, that's not true in practice because + * of early VIA chips and (more importantly) broken virtualizers that + * are not easy to detect. Hence, probe for it based on first + * principles. + * + * Note: no 64-bit chip is known to lack these, but put the code here + * for consistency with 32 bits, and to make it utterly trivial to + * diagnose the problem should it ever surface. + */ +static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) +{ + const u32 nopl_signature = 0x888c53b1; /* Random number */ + u32 has_nopl = nopl_signature; + + clear_cpu_cap(c, X86_FEATURE_NOPL); + if (c->x86 >= 6) { + asm volatile("\n" + "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ + "2:\n" + " .section .fixup,\"ax\"\n" + "3: xor %0,%0\n" + " jmp 2b\n" + " .previous\n" + _ASM_EXTABLE(1b,3b) + : "+a" (has_nopl)); + + if (has_nopl == nopl_signature) + set_cpu_cap(c, X86_FEATURE_NOPL); + } +} + static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); void __init early_cpu_init(void) @@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86_phys_bits = eax & 0xff; } + detect_nopl(c); + if (c->x86_vendor != X86_VENDOR_UNKNOWN && cpu_devs[c->x86_vendor]->c_early_init) cpu_devs[c->x86_vendor]->c_early_init(c); @@ -394,6 +430,49 @@ static __init int setup_noclflush(char *arg) } __setup("noclflush", setup_noclflush); +struct msr_range { + unsigned min; + unsigned max; +}; + +static struct msr_range msr_range_array[] __cpuinitdata = { + { 0x00000000, 0x00000418}, + { 0xc0000000, 0xc000040b}, + { 0xc0010000, 0xc0010142}, + { 0xc0011000, 0xc001103b}, +}; + +static void __cpuinit print_cpu_msr(void) +{ + unsigned index; + u64 val; + int i; + unsigned index_min, index_max; + + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { + if (rdmsrl_amd_safe(index, &val)) + continue; + printk(KERN_INFO " MSR%08x: %016llx\n", index, val); + } + } +} + +static int show_msr __cpuinitdata; +static __init int setup_show_msr(char *arg) +{ + int num; + + get_option(&arg, &num); + + if (num > 0) + show_msr = num; + return 1; +} +__setup("show_msr=", setup_show_msr); + void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { if (c->x86_model_id[0]) @@ -403,6 +482,14 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) printk(KERN_CONT " stepping %02x\n", c->x86_mask); else printk(KERN_CONT "\n"); + +#ifdef CONFIG_SMP + if (c->cpu_index < show_msr) + print_cpu_msr(); +#else + if (show_msr) + print_cpu_msr(); +#endif } static __init int setup_disablecpuid(char *arg) @@ -493,17 +580,20 @@ void pda_init(int cpu) /* others are initialized in smpboot.c */ pda->pcurrent = &init_task; pda->irqstackptr = boot_cpu_stack; + pda->irqstackptr += IRQSTACKSIZE - 64; } else { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", cpu); + if (!pda->irqstackptr) { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", + cpu); + pda->irqstackptr += IRQSTACKSIZE - 64; + } if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) pda->nodenumber = cpu_to_node(cpu); } - - pda->irqstackptr += IRQSTACKSIZE-64; } char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + @@ -601,19 +691,22 @@ void __cpuinit cpu_init(void) /* * set up and load the per-CPU TSS */ - for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (!orig_ist->ist[0]) { static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER }; - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception stack %ld %d\n", - v, cpu); + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception " + "stack %ld %d\n", v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->x86_tss.ist[v] = + (unsigned long)estacks; } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; } t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index e710a21bb6e..898a5a2002e 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -15,13 +15,11 @@ /* * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU */ -static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; - unsigned long flags; /* we test for DEVID by checking whether CCR3 is writable */ - local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, ccr3 ^ 0x80); getCx86(0xc0); /* dummy to change bus */ @@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) *dir0 = getCx86(CX86_DIR0); *dir1 = getCx86(CX86_DIR1); } - local_irq_restore(flags); } +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +{ + unsigned long flags; + + local_irq_save(flags); + __do_cyrix_devid(dir0, dir1); + local_irq_restore(flags); +} /* * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in * order to identify the Cyrix CPU model after we're out of setup.c @@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void) local_irq_restore(flags); } +static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c) +{ + unsigned char dir0, dir0_msn, dir1 = 0; + + __do_cyrix_devid(&dir0, &dir1); + dir0_msn = dir0 >> 4; /* identifies CPU "family" */ + + switch (dir0_msn) { + case 3: /* 6x86/6x86L */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + case 5: /* 6x86MX/M II */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + } +} static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { @@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, + .c_early_init = early_init_cyrix, .c_init = init_cyrix, .c_identify = cyrix_identify, }; diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c index e43ad4ad4cb..c9017799497 100644 --- a/arch/x86/kernel/cpu/feature_names.c +++ b/arch/x86/kernel/cpu/feature_names.c @@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = { NULL, NULL, NULL, NULL, "constant_tsc", "up", NULL, "arch_perfmon", "pebs", "bts", NULL, NULL, - "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "rep_good", NULL, NULL, NULL, + "nopl", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index b75f2569b8f..f113ef4595f 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -222,10 +222,11 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_BTS); if (!(l1 & (1<<12))) set_cpu_cap(c, X86_FEATURE_PEBS); + ds_init_intel(c); } if (cpu_has_bts) - ds_init_intel(c); + ptrace_bts_init_intel(c); /* * See if we have a good local APIC by checking for buggy Pentia, diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index cb7d3b6a80e..4e8d77f01ee 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -401,12 +401,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, tmp |= ~((1<<(hi - 1)) - 1); if (tmp != mask_lo) { - static int once = 1; - - if (once) { - printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n"); - once = 0; - } + WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n"); mask_lo = tmp; } } diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 84c480bb371..4c4214690dd 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -405,9 +405,9 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset) } /* RED-PEN: base can be > 32bit */ len += seq_printf(seq, - "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n", + "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n", i, base, base >> (20 - PAGE_SHIFT), size, factor, - mtrr_attrib_to_str(type), mtrr_usage_table[i]); + mtrr_usage_table[i], mtrr_attrib_to_str(type)); } } return 0; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index b117d7f8a56..c78c04821ea 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -729,7 +729,7 @@ struct var_mtrr_range_state { mtrr_type type; }; -struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; static int __initdata debug_print; static int __init @@ -759,7 +759,8 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, /* take out UC ranges */ for (i = 0; i < num_var_ranges; i++) { type = range_state[i].type; - if (type != MTRR_TYPE_UNCACHABLE) + if (type != MTRR_TYPE_UNCACHABLE && + type != MTRR_TYPE_WRPROT) continue; size = range_state[i].size_pfn; if (!size) @@ -834,7 +835,14 @@ static int __init enable_mtrr_cleanup_setup(char *str) enable_mtrr_cleanup = 1; return 0; } -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup); + +static int __init mtrr_cleanup_debug_setup(char *str) +{ + debug_print = 1; + return 0; +} +early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup); struct var_mtrr_state { unsigned long range_startk; @@ -898,6 +906,27 @@ set_var_mtrr_all(unsigned int address_bits) } } +static unsigned long to_size_factor(unsigned long sizek, char *factorp) +{ + char factor; + unsigned long base = sizek; + + if (base & ((1<<10) - 1)) { + /* not MB alignment */ + factor = 'K'; + } else if (base & ((1<<20) - 1)){ + factor = 'M'; + base >>= 10; + } else { + factor = 'G'; + base >>= 20; + } + + *factorp = factor; + + return base; +} + static unsigned int __init range_to_mtrr(unsigned int reg, unsigned long range_startk, unsigned long range_sizek, unsigned char type) @@ -919,13 +948,21 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - if (debug_print) + if (debug_print) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + start_base = to_size_factor(range_startk, &start_factor), + size_base = to_size_factor(sizek, &size_factor), + printk(KERN_DEBUG "Setting variable MTRR %d, " - "base: %ldMB, range: %ldMB, type %s\n", - reg, range_startk >> 10, sizek >> 10, + "base: %ld%cB, range: %ld%cB, type %s\n", + reg, start_base, start_factor, + size_base, size_factor, (type == MTRR_TYPE_UNCACHABLE)?"UC": ((type == MTRR_TYPE_WRBACK)?"WB":"Other") ); + } save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; @@ -970,6 +1007,8 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + + /* no increase */ if (range0_sizek == state->range_sizek) { if (debug_print) printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", @@ -980,13 +1019,40 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, return 0; } - range0_sizek -= chunk_sizek; - if (range0_sizek && sizek) { - while (range0_basek + range0_sizek > (basek + sizek)) { - range0_sizek -= chunk_sizek; - if (!range0_sizek) - break; - } + /* only cut back, when it is not the last */ + if (sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { + if (range0_sizek >= chunk_sizek) + range0_sizek -= chunk_sizek; + else + range0_sizek = 0; + + if (!range0_sizek) + break; + } + } + +second_try: + range_basek = range0_basek + range0_sizek; + + /* one hole in the middle */ + if (range_basek > basek && range_basek <= (basek + sizek)) + second_sizek = range_basek - basek; + + if (range0_sizek > state->range_sizek) { + + /* one hole in middle or at end */ + hole_sizek = range0_sizek - state->range_sizek - second_sizek; + + /* hole size should be less than half of range0 size */ + if (hole_sizek >= (range0_sizek >> 1) && + range0_sizek >= chunk_sizek) { + range0_sizek -= chunk_sizek; + second_sizek = 0; + hole_sizek = 0; + + goto second_try; + } } if (range0_sizek) { @@ -996,50 +1062,28 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK); - - } - - range_basek = range0_basek + range0_sizek; - range_sizek = chunk_sizek; - - if (range_basek + range_sizek > basek && - range_basek + range_sizek <= (basek + sizek)) { - /* one hole */ - second_basek = basek; - second_sizek = range_basek + range_sizek - basek; } - /* if last piece, only could one hole near end */ - if ((second_basek || !basek) && - range_sizek - (state->range_sizek - range0_sizek) - second_sizek < - (chunk_sizek >> 1)) { - /* - * one hole in middle (second_sizek is 0) or at end - * (second_sizek is 0 ) - */ - hole_sizek = range_sizek - (state->range_sizek - range0_sizek) - - second_sizek; - hole_basek = range_basek + range_sizek - hole_sizek - - second_sizek; - } else { - /* fallback for big hole, or several holes */ + if (range0_sizek < state->range_sizek) { + /* need to handle left over */ range_sizek = state->range_sizek - range0_sizek; - second_basek = 0; - second_sizek = 0; + + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", + range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK); } - if (debug_print) - printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, - (range_basek + range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, - MTRR_TYPE_WRBACK); if (hole_sizek) { + hole_basek = range_basek - hole_sizek - second_sizek; if (debug_print) printk(KERN_DEBUG "hole: %016lx - %016lx\n", - hole_basek<<10, (hole_basek + hole_sizek)<<10); - state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, - MTRR_TYPE_UNCACHABLE); - + hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE); } return second_sizek; @@ -1154,11 +1198,11 @@ struct mtrr_cleanup_result { }; /* - * gran_size: 1M, 2M, ..., 2G - * chunk size: gran_size, ..., 4G - * so we need (2+13)*6 + * gran_size: 64K, 128K, 256K, 512K, 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 2G + * so we need (1+16)*8 */ -#define NUM_RESULT 90 +#define NUM_RESULT 136 #define PSHIFT (PAGE_SHIFT - 10) static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; @@ -1168,13 +1212,14 @@ static unsigned long __initdata min_loss_pfn[RANGE_NUM]; static int __init mtrr_cleanup(unsigned address_bits) { unsigned long extra_remove_base, extra_remove_size; - unsigned long i, base, size, def, dummy; + unsigned long base, size, def, dummy; mtrr_type type; int nr_range, nr_range_new; u64 chunk_size, gran_size; unsigned long range_sums, range_sums_new; int index_good; int num_reg_good; + int i; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1204,6 +1249,8 @@ static int __init mtrr_cleanup(unsigned address_bits) continue; if (!size) type = MTRR_NUM_TYPES; + if (type == MTRR_TYPE_WRPROT) + type = MTRR_TYPE_UNCACHABLE; num[type]++; } @@ -1216,23 +1263,57 @@ static int __init mtrr_cleanup(unsigned address_bits) num_var_ranges - num[MTRR_NUM_TYPES]) return 0; + /* print original var MTRRs at first, for debugging: */ + printk(KERN_DEBUG "original variable MTRRs\n"); + for (i = 0; i < num_var_ranges; i++) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + size_base = range_state[i].size_pfn << (PAGE_SHIFT - 10); + if (!size_base) + continue; + + size_base = to_size_factor(size_base, &size_factor), + start_base = range_state[i].base_pfn << (PAGE_SHIFT - 10); + start_base = to_size_factor(start_base, &start_factor), + type = range_state[i].type; + + printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n", + i, start_base, start_factor, + size_base, size_factor, + (type == MTRR_TYPE_UNCACHABLE) ? "UC" : + ((type == MTRR_TYPE_WRPROT) ? "WP" : + ((type == MTRR_TYPE_WRBACK) ? "WB" : "Other")) + ); + } + memset(range, 0, sizeof(range)); extra_remove_size = 0; - if (mtrr_tom2) { - extra_remove_base = 1 << (32 - PAGE_SHIFT); + extra_remove_base = 1 << (32 - PAGE_SHIFT); + if (mtrr_tom2) extra_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; - } nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + /* + * [0, 1M) should always be coverred by var mtrr with WB + * and fixed mtrrs should take effective before var mtrr for it + */ + nr_range = add_range_with_merge(range, nr_range, 0, + (1ULL<<(20 - PAGE_SHIFT)) - 1); + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + range_sums = sum_ranges(range, nr_range); printk(KERN_INFO "total RAM coverred: %ldM\n", range_sums >> (20 - PAGE_SHIFT)); if (mtrr_chunk_size && mtrr_gran_size) { int num_reg; + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; - debug_print = 1; + debug_print++; /* convert ranges to var ranges state */ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, mtrr_gran_size); @@ -1256,34 +1337,48 @@ static int __init mtrr_cleanup(unsigned address_bits) result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT; - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", result[i].num_reg, result[i].bad?"-":"", - result[i].lose_cover_sizek >> 10); + lose_base, lose_factor); if (!result[i].bad) { set_var_mtrr_all(address_bits); return 1; } printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " "will find optimal one\n"); - debug_print = 0; + debug_print--; memset(result, 0, sizeof(result[0])); } i = 0; memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); memset(result, 0, sizeof(result)); - for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) { - for (chunk_size = gran_size; chunk_size < (1ULL<<33); + for (gran_size = (1ULL<<16); gran_size < (1ULL<<32); gran_size <<= 1) { + char gran_factor; + unsigned long gran_base; + + if (debug_print) + gran_base = to_size_factor(gran_size >> 10, &gran_factor); + + for (chunk_size = gran_size; chunk_size < (1ULL<<32); chunk_size <<= 1) { int num_reg; - if (debug_print) - printk(KERN_INFO - "\ngran_size: %lldM chunk_size_size: %lldM\n", - gran_size >> 20, chunk_size >> 20); + if (debug_print) { + char chunk_factor; + unsigned long chunk_base; + + chunk_base = to_size_factor(chunk_size>>10, &chunk_factor), + printk(KERN_INFO "\n"); + printk(KERN_INFO "gran_size: %ld%c chunk_size: %ld%c \n", + gran_base, gran_factor, chunk_base, chunk_factor); + } if (i >= NUM_RESULT) continue; @@ -1326,12 +1421,18 @@ static int __init mtrr_cleanup(unsigned address_bits) /* print out all */ for (i = 0; i < NUM_RESULT; i++) { - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n", - result[i].num_reg, result[i].bad?"-":"", - result[i].lose_cover_sizek >> 10); + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", + result[i].num_reg, result[i].bad?"-":"", + lose_base, lose_factor); } /* try to find the optimal index */ @@ -1339,10 +1440,8 @@ static int __init mtrr_cleanup(unsigned address_bits) nr_mtrr_spare_reg = num_var_ranges - 1; num_reg_good = -1; for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { - if (!min_loss_pfn[i]) { + if (!min_loss_pfn[i]) num_reg_good = i; - break; - } } index_good = -1; @@ -1358,21 +1457,26 @@ static int __init mtrr_cleanup(unsigned address_bits) } if (index_good != -1) { + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); i = index_good; - printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", - result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n", - result[i].num_reg, - result[i].lose_cover_sizek >> 10); + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "gran_size: %ld%c \tchunk_size: %ld%c \t", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose RAM: %ld%c\n", + result[i].num_reg, lose_base, lose_factor); /* convert ranges to var ranges state */ chunk_size = result[i].chunk_sizek; chunk_size <<= 10; gran_size = result[i].gran_sizek; gran_size <<= 10; - debug_print = 1; + debug_print++; x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + debug_print--; set_var_mtrr_all(address_bits); return 1; } diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 05cc22dbd4f..6bff382094f 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -295,13 +295,19 @@ static int setup_k7_watchdog(unsigned nmi_hz) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); + /* initialize the wd struct before enabling */ wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= K7_EVNTSEL_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + return 1; } @@ -379,13 +385,19 @@ static int setup_p6_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= P6_EVNTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); + /* initialize the wd struct before enabling */ wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= P6_EVNTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + return 1; } @@ -432,6 +444,27 @@ static const struct wd_ops p6_wd_ops = { #define P4_CCCR_ENABLE (1 << 12) #define P4_CCCR_OVF (1 << 31) +#define P4_CONTROLS 18 +static unsigned int p4_controls[18] = { + MSR_P4_BPU_CCCR0, + MSR_P4_BPU_CCCR1, + MSR_P4_BPU_CCCR2, + MSR_P4_BPU_CCCR3, + MSR_P4_MS_CCCR0, + MSR_P4_MS_CCCR1, + MSR_P4_MS_CCCR2, + MSR_P4_MS_CCCR3, + MSR_P4_FLAME_CCCR0, + MSR_P4_FLAME_CCCR1, + MSR_P4_FLAME_CCCR2, + MSR_P4_FLAME_CCCR3, + MSR_P4_IQ_CCCR0, + MSR_P4_IQ_CCCR1, + MSR_P4_IQ_CCCR2, + MSR_P4_IQ_CCCR3, + MSR_P4_IQ_CCCR4, + MSR_P4_IQ_CCCR5, +}; /* * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter * CRU_ESCR0 (with any non-null event selector) through a complemented @@ -473,6 +506,26 @@ static int setup_p4_watchdog(unsigned nmi_hz) evntsel_msr = MSR_P4_CRU_ESCR0; cccr_msr = MSR_P4_IQ_CCCR0; cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + + /* + * If we're on the kdump kernel or other situation, we may + * still have other performance counter registers set to + * interrupt and they'll keep interrupting forever because + * of the P4_CCCR_OVF quirk. So we need to ACK all the + * pending interrupts and disable all the registers here, + * before reenabling the NMI delivery. Refer to p4_rearm() + * about the P4_CCCR_OVF quirk. + */ + if (reset_devices) { + unsigned int low, high; + int i; + + for (i = 0; i < P4_CONTROLS; i++) { + rdmsr(p4_controls[i], low, high); + low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF); + wrmsr(p4_controls[i], low, high); + } + } } else { /* logical cpu 1 */ perfctr_msr = MSR_P4_IQ_PERFCTR1; @@ -499,12 +552,17 @@ static int setup_p4_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); wrmsr(cccr_msr, cccr_val, 0); write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - cccr_val |= P4_CCCR_ENABLE; - wrmsr(cccr_msr, cccr_val, 0); + wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = cccr_msr; + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); return 1; } @@ -620,13 +678,17 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1); return 1; } diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 14b11b3be31..6a44d646599 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -36,7 +36,6 @@ #include <linux/smp_lock.h> #include <linux/major.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <linux/device.h> #include <linux/cpu.h> #include <linux/notifier.h> @@ -89,6 +88,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, struct cpuid_regs cmd; int cpu = iminor(file->f_path.dentry->d_inode); u64 pos = *ppos; + ssize_t bytes = 0; + int err = 0; if (count % 16) return -EINVAL; /* Invalid chunk size */ @@ -96,14 +97,19 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, for (; count; count -= 16) { cmd.eax = pos; cmd.ecx = pos >> 32; - smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); - if (copy_to_user(tmp, &cmd, 16)) - return -EFAULT; + err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); + if (err) + break; + if (copy_to_user(tmp, &cmd, 16)) { + err = -EFAULT; + break; + } tmp += 16; + bytes += 16; *ppos = ++pos; } - return tmp - buf; + return bytes ? bytes : err; } static int cpuid_open(struct inode *inode, struct file *file) diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c index 15e6c6bc4a4..e90a60ef10c 100644 --- a/arch/x86/kernel/crash_dump_64.c +++ b/arch/x86/kernel/crash_dump_64.c @@ -7,9 +7,8 @@ #include <linux/errno.h> #include <linux/crash_dump.h> - -#include <asm/uaccess.h> -#include <asm/io.h> +#include <linux/uaccess.h> +#include <linux/io.h> /** * copy_oldmem_page - copy one page from "oldmem" @@ -25,7 +24,7 @@ * in the current kernel. We stitch up a pte, similar to kmap_atomic. */ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) + size_t csize, unsigned long offset, int userbuf) { void *vaddr; @@ -33,14 +32,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, return 0; vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + if (!vaddr) + return -ENOMEM; if (userbuf) { - if (copy_to_user(buf, (vaddr + offset), csize)) { + if (copy_to_user(buf, vaddr + offset, csize)) { iounmap(vaddr); return -EFAULT; } } else - memcpy(buf, (vaddr + offset), csize); + memcpy(buf, vaddr + offset, csize); iounmap(vaddr); return csize; diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 11c11b8ec48..2b69994fd3a 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -2,26 +2,49 @@ * Debug Store support * * This provides a low-level interface to the hardware's Debug Store - * feature that is used for last branch recording (LBR) and + * feature that is used for branch trace store (BTS) and * precise-event based sampling (PEBS). * - * Different architectures use a different DS layout/pointer size. - * The below functions therefore work on a void*. + * It manages: + * - per-thread and per-cpu allocation of BTS and PEBS + * - buffer memory allocation (optional) + * - buffer overflow handling + * - buffer access * + * It assumes: + * - get_task_struct on all parameter tasks + * - current is allowed to trace parameter tasks * - * Since there is no user for PEBS, yet, only LBR (or branch - * trace store, BTS) is supported. * - * - * Copyright (C) 2007 Intel Corporation. - * Markus Metzger <markus.t.metzger@intel.com>, Dec 2007 + * Copyright (C) 2007-2008 Intel Corporation. + * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008 */ + +#ifdef CONFIG_X86_DS + #include <asm/ds.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/slab.h> +#include <linux/sched.h> +#include <linux/mm.h> + + +/* + * The configuration for a particular DS hardware implementation. + */ +struct ds_configuration { + /* the size of the DS structure in bytes */ + unsigned char sizeof_ds; + /* the size of one pointer-typed field in the DS structure in bytes; + this covers the first 8 fields related to buffer management. */ + unsigned char sizeof_field; + /* the size of a BTS/PEBS record in bytes */ + unsigned char sizeof_rec[2]; +}; +static struct ds_configuration ds_cfg; /* @@ -44,378 +67,747 @@ * (interrupt occurs when write pointer passes interrupt pointer) * - value to which counter is reset following counter overflow * - * On later architectures, the last branch recording hardware uses - * 64bit pointers even in 32bit mode. - * - * - * Branch Trace Store (BTS) records store information about control - * flow changes. They at least provide the following information: - * - source linear address - * - destination linear address + * Later architectures use 64bit pointers throughout, whereas earlier + * architectures use 32bit pointers in 32bit mode. * - * Netburst supported a predicated bit that had been dropped in later - * architectures. We do not suppor it. * + * We compute the base address for the first 8 fields based on: + * - the field size stored in the DS configuration + * - the relative field position + * - an offset giving the start of the respective region * - * In order to abstract from the actual DS and BTS layout, we describe - * the access to the relevant fields. - * Thanks to Andi Kleen for proposing this design. + * This offset is further used to index various arrays holding + * information for BTS and PEBS at the respective index. * - * The implementation, however, is not as general as it might seem. In - * order to stay somewhat simple and efficient, we assume an - * underlying unsigned type (mostly a pointer type) and we expect the - * field to be at least as big as that type. + * On later 32bit processors, we only access the lower 32bit of the + * 64bit pointer fields. The upper halves will be zeroed out. */ -/* - * A special from_ip address to indicate that the BTS record is an - * info record that needs to be interpreted or skipped. - */ -#define BTS_ESCAPE_ADDRESS (-1) +enum ds_field { + ds_buffer_base = 0, + ds_index, + ds_absolute_maximum, + ds_interrupt_threshold, +}; -/* - * A field access descriptor - */ -struct access_desc { - unsigned char offset; - unsigned char size; +enum ds_qualifier { + ds_bts = 0, + ds_pebs }; +static inline unsigned long ds_get(const unsigned char *base, + enum ds_qualifier qual, enum ds_field field) +{ + base += (ds_cfg.sizeof_field * (field + (4 * qual))); + return *(unsigned long *)base; +} + +static inline void ds_set(unsigned char *base, enum ds_qualifier qual, + enum ds_field field, unsigned long value) +{ + base += (ds_cfg.sizeof_field * (field + (4 * qual))); + (*(unsigned long *)base) = value; +} + + /* - * The configuration for a particular DS/BTS hardware implementation. + * Locking is done only for allocating BTS or PEBS resources and for + * guarding context and buffer memory allocation. + * + * Most functions require the current task to own the ds context part + * they are going to access. All the locking is done when validating + * access to the context. */ -struct ds_configuration { - /* the DS configuration */ - unsigned char sizeof_ds; - struct access_desc bts_buffer_base; - struct access_desc bts_index; - struct access_desc bts_absolute_maximum; - struct access_desc bts_interrupt_threshold; - /* the BTS configuration */ - unsigned char sizeof_bts; - struct access_desc from_ip; - struct access_desc to_ip; - /* BTS variants used to store additional information like - timestamps */ - struct access_desc info_type; - struct access_desc info_data; - unsigned long debugctl_mask; -}; +static spinlock_t ds_lock = __SPIN_LOCK_UNLOCKED(ds_lock); /* - * The global configuration used by the below accessor functions + * Validate that the current task is allowed to access the BTS/PEBS + * buffer of the parameter task. + * + * Returns 0, if access is granted; -Eerrno, otherwise. */ -static struct ds_configuration ds_cfg; +static inline int ds_validate_access(struct ds_context *context, + enum ds_qualifier qual) +{ + if (!context) + return -EPERM; + + if (context->owner[qual] == current) + return 0; + + return -EPERM; +} + /* - * Accessor functions for some DS and BTS fields using the above - * global ptrace_bts_cfg. + * We either support (system-wide) per-cpu or per-thread allocation. + * We distinguish the two based on the task_struct pointer, where a + * NULL pointer indicates per-cpu allocation for the current cpu. + * + * Allocations are use-counted. As soon as resources are allocated, + * further allocations must be of the same type (per-cpu or + * per-thread). We model this by counting allocations (i.e. the number + * of tracers of a certain type) for one type negatively: + * =0 no tracers + * >0 number of per-thread tracers + * <0 number of per-cpu tracers + * + * The below functions to get and put tracers and to check the + * allocation type require the ds_lock to be held by the caller. + * + * Tracers essentially gives the number of ds contexts for a certain + * type of allocation. */ -static inline unsigned long get_bts_buffer_base(char *base) +static long tracers; + +static inline void get_tracer(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_buffer_base.offset); + tracers += (task ? 1 : -1); } -static inline void set_bts_buffer_base(char *base, unsigned long value) + +static inline void put_tracer(struct task_struct *task) { - (*(unsigned long *)(base + ds_cfg.bts_buffer_base.offset)) = value; + tracers -= (task ? 1 : -1); } -static inline unsigned long get_bts_index(char *base) + +static inline int check_tracer(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_index.offset); + return (task ? (tracers >= 0) : (tracers <= 0)); } -static inline void set_bts_index(char *base, unsigned long value) + + +/* + * The DS context is either attached to a thread or to a cpu: + * - in the former case, the thread_struct contains a pointer to the + * attached context. + * - in the latter case, we use a static array of per-cpu context + * pointers. + * + * Contexts are use-counted. They are allocated on first access and + * deallocated when the last user puts the context. + * + * We distinguish between an allocating and a non-allocating get of a + * context: + * - the allocating get is used for requesting BTS/PEBS resources. It + * requires the caller to hold the global ds_lock. + * - the non-allocating get is used for all other cases. A + * non-existing context indicates an error. It acquires and releases + * the ds_lock itself for obtaining the context. + * + * A context and its DS configuration are allocated and deallocated + * together. A context always has a DS configuration of the + * appropriate size. + */ +static DEFINE_PER_CPU(struct ds_context *, system_context); + +#define this_system_context per_cpu(system_context, smp_processor_id()) + +/* + * Returns the pointer to the parameter task's context or to the + * system-wide context, if task is NULL. + * + * Increases the use count of the returned context, if not NULL. + */ +static inline struct ds_context *ds_get_context(struct task_struct *task) { - (*(unsigned long *)(base + ds_cfg.bts_index.offset)) = value; + struct ds_context *context; + + spin_lock(&ds_lock); + + context = (task ? task->thread.ds_ctx : this_system_context); + if (context) + context->count++; + + spin_unlock(&ds_lock); + + return context; } -static inline unsigned long get_bts_absolute_maximum(char *base) + +/* + * Same as ds_get_context, but allocates the context and it's DS + * structure, if necessary; returns NULL; if out of memory. + * + * pre: requires ds_lock to be held + */ +static inline struct ds_context *ds_alloc_context(struct task_struct *task) { - return *(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset); + struct ds_context **p_context = + (task ? &task->thread.ds_ctx : &this_system_context); + struct ds_context *context = *p_context; + + if (!context) { + context = kzalloc(sizeof(*context), GFP_KERNEL); + + if (!context) + return NULL; + + context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); + if (!context->ds) { + kfree(context); + return NULL; + } + + *p_context = context; + + context->this = p_context; + context->task = task; + + if (task) + set_tsk_thread_flag(task, TIF_DS_AREA_MSR); + + if (!task || (task == current)) + wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0); + + get_tracer(task); + } + + context->count++; + + return context; } -static inline void set_bts_absolute_maximum(char *base, unsigned long value) + +/* + * Decreases the use count of the parameter context, if not NULL. + * Deallocates the context, if the use count reaches zero. + */ +static inline void ds_put_context(struct ds_context *context) { - (*(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset)) = value; + if (!context) + return; + + spin_lock(&ds_lock); + + if (--context->count) + goto out; + + *(context->this) = NULL; + + if (context->task) + clear_tsk_thread_flag(context->task, TIF_DS_AREA_MSR); + + if (!context->task || (context->task == current)) + wrmsrl(MSR_IA32_DS_AREA, 0); + + put_tracer(context->task); + + /* free any leftover buffers from tracers that did not + * deallocate them properly. */ + kfree(context->buffer[ds_bts]); + kfree(context->buffer[ds_pebs]); + kfree(context->ds); + kfree(context); + out: + spin_unlock(&ds_lock); } -static inline unsigned long get_bts_interrupt_threshold(char *base) + + +/* + * Handle a buffer overflow + * + * task: the task whose buffers are overflowing; + * NULL for a buffer overflow on the current cpu + * context: the ds context + * qual: the buffer type + */ +static void ds_overflow(struct task_struct *task, struct ds_context *context, + enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset); + if (!context) + return; + + if (context->callback[qual]) + (*context->callback[qual])(task); + + /* todo: do some more overflow handling */ } -static inline void set_bts_interrupt_threshold(char *base, unsigned long value) + + +/* + * Allocate a non-pageable buffer of the parameter size. + * Checks the memory and the locked memory rlimit. + * + * Returns the buffer, if successful; + * NULL, if out of memory or rlimit exceeded. + * + * size: the requested buffer size in bytes + * pages (out): if not NULL, contains the number of pages reserved + */ +static inline void *ds_allocate_buffer(size_t size, unsigned int *pages) { - (*(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset)) = value; + unsigned long rlim, vm, pgsz; + void *buffer; + + pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT; + + rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; + vm = current->mm->total_vm + pgsz; + if (rlim < vm) + return NULL; + + rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; + vm = current->mm->locked_vm + pgsz; + if (rlim < vm) + return NULL; + + buffer = kzalloc(size, GFP_KERNEL); + if (!buffer) + return NULL; + + current->mm->total_vm += pgsz; + current->mm->locked_vm += pgsz; + + if (pages) + *pages = pgsz; + + return buffer; } -static inline unsigned long get_from_ip(char *base) + +static int ds_request(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl, enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.from_ip.offset); + struct ds_context *context; + unsigned long buffer, adj; + const unsigned long alignment = (1 << 3); + int error = 0; + + if (!ds_cfg.sizeof_ds) + return -EOPNOTSUPP; + + /* we require some space to do alignment adjustments below */ + if (size < (alignment + ds_cfg.sizeof_rec[qual])) + return -EINVAL; + + /* buffer overflow notification is not yet implemented */ + if (ovfl) + return -EOPNOTSUPP; + + + spin_lock(&ds_lock); + + if (!check_tracer(task)) + return -EPERM; + + error = -ENOMEM; + context = ds_alloc_context(task); + if (!context) + goto out_unlock; + + error = -EALREADY; + if (context->owner[qual] == current) + goto out_unlock; + error = -EPERM; + if (context->owner[qual] != NULL) + goto out_unlock; + context->owner[qual] = current; + + spin_unlock(&ds_lock); + + + error = -ENOMEM; + if (!base) { + base = ds_allocate_buffer(size, &context->pages[qual]); + if (!base) + goto out_release; + + context->buffer[qual] = base; + } + error = 0; + + context->callback[qual] = ovfl; + + /* adjust the buffer address and size to meet alignment + * constraints: + * - buffer is double-word aligned + * - size is multiple of record size + * + * We checked the size at the very beginning; we have enough + * space to do the adjustment. + */ + buffer = (unsigned long)base; + + adj = ALIGN(buffer, alignment) - buffer; + buffer += adj; + size -= adj; + + size /= ds_cfg.sizeof_rec[qual]; + size *= ds_cfg.sizeof_rec[qual]; + + ds_set(context->ds, qual, ds_buffer_base, buffer); + ds_set(context->ds, qual, ds_index, buffer); + ds_set(context->ds, qual, ds_absolute_maximum, buffer + size); + + if (ovfl) { + /* todo: select a suitable interrupt threshold */ + } else + ds_set(context->ds, qual, + ds_interrupt_threshold, buffer + size + 1); + + /* we keep the context until ds_release */ + return error; + + out_release: + context->owner[qual] = NULL; + ds_put_context(context); + return error; + + out_unlock: + spin_unlock(&ds_lock); + ds_put_context(context); + return error; } -static inline void set_from_ip(char *base, unsigned long value) + +int ds_request_bts(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl) { - (*(unsigned long *)(base + ds_cfg.from_ip.offset)) = value; + return ds_request(task, base, size, ovfl, ds_bts); } -static inline unsigned long get_to_ip(char *base) + +int ds_request_pebs(struct task_struct *task, void *base, size_t size, + ds_ovfl_callback_t ovfl) { - return *(unsigned long *)(base + ds_cfg.to_ip.offset); + return ds_request(task, base, size, ovfl, ds_pebs); } -static inline void set_to_ip(char *base, unsigned long value) + +static int ds_release(struct task_struct *task, enum ds_qualifier qual) { - (*(unsigned long *)(base + ds_cfg.to_ip.offset)) = value; + struct ds_context *context; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + kfree(context->buffer[qual]); + context->buffer[qual] = NULL; + + current->mm->total_vm -= context->pages[qual]; + current->mm->locked_vm -= context->pages[qual]; + context->pages[qual] = 0; + context->owner[qual] = NULL; + + /* + * we put the context twice: + * once for the ds_get_context + * once for the corresponding ds_request + */ + ds_put_context(context); + out: + ds_put_context(context); + return error; } -static inline unsigned char get_info_type(char *base) + +int ds_release_bts(struct task_struct *task) { - return *(unsigned char *)(base + ds_cfg.info_type.offset); + return ds_release(task, ds_bts); } -static inline void set_info_type(char *base, unsigned char value) + +int ds_release_pebs(struct task_struct *task) { - (*(unsigned char *)(base + ds_cfg.info_type.offset)) = value; + return ds_release(task, ds_pebs); } -static inline unsigned long get_info_data(char *base) + +static int ds_get_index(struct task_struct *task, size_t *pos, + enum ds_qualifier qual) { - return *(unsigned long *)(base + ds_cfg.info_data.offset); + struct ds_context *context; + unsigned long base, index; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + base = ds_get(context->ds, qual, ds_buffer_base); + index = ds_get(context->ds, qual, ds_index); + + error = ((index - base) / ds_cfg.sizeof_rec[qual]); + if (pos) + *pos = error; + out: + ds_put_context(context); + return error; } -static inline void set_info_data(char *base, unsigned long value) + +int ds_get_bts_index(struct task_struct *task, size_t *pos) { - (*(unsigned long *)(base + ds_cfg.info_data.offset)) = value; + return ds_get_index(task, pos, ds_bts); } +int ds_get_pebs_index(struct task_struct *task, size_t *pos) +{ + return ds_get_index(task, pos, ds_pebs); +} -int ds_allocate(void **dsp, size_t bts_size_in_bytes) +static int ds_get_end(struct task_struct *task, size_t *pos, + enum ds_qualifier qual) { - size_t bts_size_in_records; - unsigned long bts; - void *ds; + struct ds_context *context; + unsigned long base, end; + int error; + + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + + base = ds_get(context->ds, qual, ds_buffer_base); + end = ds_get(context->ds, qual, ds_absolute_maximum); + + error = ((end - base) / ds_cfg.sizeof_rec[qual]); + if (pos) + *pos = error; + out: + ds_put_context(context); + return error; +} - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; +int ds_get_bts_end(struct task_struct *task, size_t *pos) +{ + return ds_get_end(task, pos, ds_bts); +} - if (bts_size_in_bytes < 0) - return -EINVAL; +int ds_get_pebs_end(struct task_struct *task, size_t *pos) +{ + return ds_get_end(task, pos, ds_pebs); +} - bts_size_in_records = - bts_size_in_bytes / ds_cfg.sizeof_bts; - bts_size_in_bytes = - bts_size_in_records * ds_cfg.sizeof_bts; +static int ds_access(struct task_struct *task, size_t index, + const void **record, enum ds_qualifier qual) +{ + struct ds_context *context; + unsigned long base, idx; + int error; - if (bts_size_in_bytes <= 0) + if (!record) return -EINVAL; - bts = (unsigned long)kzalloc(bts_size_in_bytes, GFP_KERNEL); - - if (!bts) - return -ENOMEM; + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; - ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); + base = ds_get(context->ds, qual, ds_buffer_base); + idx = base + (index * ds_cfg.sizeof_rec[qual]); - if (!ds) { - kfree((void *)bts); - return -ENOMEM; - } - - set_bts_buffer_base(ds, bts); - set_bts_index(ds, bts); - set_bts_absolute_maximum(ds, bts + bts_size_in_bytes); - set_bts_interrupt_threshold(ds, bts + bts_size_in_bytes + 1); + error = -EINVAL; + if (idx > ds_get(context->ds, qual, ds_absolute_maximum)) + goto out; - *dsp = ds; - return 0; + *record = (const void *)idx; + error = ds_cfg.sizeof_rec[qual]; + out: + ds_put_context(context); + return error; } -int ds_free(void **dsp) +int ds_access_bts(struct task_struct *task, size_t index, const void **record) { - if (*dsp) { - kfree((void *)get_bts_buffer_base(*dsp)); - kfree(*dsp); - *dsp = NULL; - } - return 0; + return ds_access(task, index, record, ds_bts); } -int ds_get_bts_size(void *ds) +int ds_access_pebs(struct task_struct *task, size_t index, const void **record) { - int size_in_bytes; - - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; - - if (!ds) - return 0; - - size_in_bytes = - get_bts_absolute_maximum(ds) - - get_bts_buffer_base(ds); - return size_in_bytes; + return ds_access(task, index, record, ds_pebs); } -int ds_get_bts_end(void *ds) +static int ds_write(struct task_struct *task, const void *record, size_t size, + enum ds_qualifier qual, int force) { - int size_in_bytes = ds_get_bts_size(ds); - - if (size_in_bytes <= 0) - return size_in_bytes; + struct ds_context *context; + int error; - return size_in_bytes / ds_cfg.sizeof_bts; -} + if (!record) + return -EINVAL; -int ds_get_bts_index(void *ds) -{ - int index_offset_in_bytes; + error = -EPERM; + context = ds_get_context(task); + if (!context) + goto out; - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; + if (!force) { + error = ds_validate_access(context, qual); + if (error < 0) + goto out; + } - index_offset_in_bytes = - get_bts_index(ds) - - get_bts_buffer_base(ds); + error = 0; + while (size) { + unsigned long base, index, end, write_end, int_th; + unsigned long write_size, adj_write_size; + + /* + * write as much as possible without producing an + * overflow interrupt. + * + * interrupt_threshold must either be + * - bigger than absolute_maximum or + * - point to a record between buffer_base and absolute_maximum + * + * index points to a valid record. + */ + base = ds_get(context->ds, qual, ds_buffer_base); + index = ds_get(context->ds, qual, ds_index); + end = ds_get(context->ds, qual, ds_absolute_maximum); + int_th = ds_get(context->ds, qual, ds_interrupt_threshold); + + write_end = min(end, int_th); + + /* if we are already beyond the interrupt threshold, + * we fill the entire buffer */ + if (write_end <= index) + write_end = end; + + if (write_end <= index) + goto out; + + write_size = min((unsigned long) size, write_end - index); + memcpy((void *)index, record, write_size); + + record = (const char *)record + write_size; + size -= write_size; + error += write_size; + + adj_write_size = write_size / ds_cfg.sizeof_rec[qual]; + adj_write_size *= ds_cfg.sizeof_rec[qual]; + + /* zero out trailing bytes */ + memset((char *)index + write_size, 0, + adj_write_size - write_size); + index += adj_write_size; + + if (index >= end) + index = base; + ds_set(context->ds, qual, ds_index, index); + + if (index >= int_th) + ds_overflow(task, context, qual); + } - return index_offset_in_bytes / ds_cfg.sizeof_bts; + out: + ds_put_context(context); + return error; } -int ds_set_overflow(void *ds, int method) +int ds_write_bts(struct task_struct *task, const void *record, size_t size) { - switch (method) { - case DS_O_SIGNAL: - return -EOPNOTSUPP; - case DS_O_WRAP: - return 0; - default: - return -EINVAL; - } + return ds_write(task, record, size, ds_bts, /* force = */ 0); } -int ds_get_overflow(void *ds) +int ds_write_pebs(struct task_struct *task, const void *record, size_t size) { - return DS_O_WRAP; + return ds_write(task, record, size, ds_pebs, /* force = */ 0); } -int ds_clear(void *ds) +int ds_unchecked_write_bts(struct task_struct *task, + const void *record, size_t size) { - int bts_size = ds_get_bts_size(ds); - unsigned long bts_base; - - if (bts_size <= 0) - return bts_size; - - bts_base = get_bts_buffer_base(ds); - memset((void *)bts_base, 0, bts_size); - - set_bts_index(ds, bts_base); - return 0; + return ds_write(task, record, size, ds_bts, /* force = */ 1); } -int ds_read_bts(void *ds, int index, struct bts_struct *out) +int ds_unchecked_write_pebs(struct task_struct *task, + const void *record, size_t size) { - void *bts; + return ds_write(task, record, size, ds_pebs, /* force = */ 1); +} - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; +static int ds_reset_or_clear(struct task_struct *task, + enum ds_qualifier qual, int clear) +{ + struct ds_context *context; + unsigned long base, end; + int error; - if (index < 0) - return -EINVAL; + context = ds_get_context(task); + error = ds_validate_access(context, qual); + if (error < 0) + goto out; - if (index >= ds_get_bts_size(ds)) - return -EINVAL; + base = ds_get(context->ds, qual, ds_buffer_base); + end = ds_get(context->ds, qual, ds_absolute_maximum); - bts = (void *)(get_bts_buffer_base(ds) + (index * ds_cfg.sizeof_bts)); + if (clear) + memset((void *)base, 0, end - base); - memset(out, 0, sizeof(*out)); - if (get_from_ip(bts) == BTS_ESCAPE_ADDRESS) { - out->qualifier = get_info_type(bts); - out->variant.jiffies = get_info_data(bts); - } else { - out->qualifier = BTS_BRANCH; - out->variant.lbr.from_ip = get_from_ip(bts); - out->variant.lbr.to_ip = get_to_ip(bts); - } + ds_set(context->ds, qual, ds_index, base); - return sizeof(*out);; + error = 0; + out: + ds_put_context(context); + return error; } -int ds_write_bts(void *ds, const struct bts_struct *in) +int ds_reset_bts(struct task_struct *task) { - unsigned long bts; - - if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts) - return -EOPNOTSUPP; - - if (ds_get_bts_size(ds) <= 0) - return -ENXIO; + return ds_reset_or_clear(task, ds_bts, /* clear = */ 0); +} - bts = get_bts_index(ds); +int ds_reset_pebs(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_pebs, /* clear = */ 0); +} - memset((void *)bts, 0, ds_cfg.sizeof_bts); - switch (in->qualifier) { - case BTS_INVALID: - break; +int ds_clear_bts(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_bts, /* clear = */ 1); +} - case BTS_BRANCH: - set_from_ip((void *)bts, in->variant.lbr.from_ip); - set_to_ip((void *)bts, in->variant.lbr.to_ip); - break; +int ds_clear_pebs(struct task_struct *task) +{ + return ds_reset_or_clear(task, ds_pebs, /* clear = */ 1); +} - case BTS_TASK_ARRIVES: - case BTS_TASK_DEPARTS: - set_from_ip((void *)bts, BTS_ESCAPE_ADDRESS); - set_info_type((void *)bts, in->qualifier); - set_info_data((void *)bts, in->variant.jiffies); - break; +int ds_get_pebs_reset(struct task_struct *task, u64 *value) +{ + struct ds_context *context; + int error; - default: + if (!value) return -EINVAL; - } - bts = bts + ds_cfg.sizeof_bts; - if (bts >= get_bts_absolute_maximum(ds)) - bts = get_bts_buffer_base(ds); - set_bts_index(ds, bts); + context = ds_get_context(task); + error = ds_validate_access(context, ds_pebs); + if (error < 0) + goto out; - return ds_cfg.sizeof_bts; + *value = *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)); + + error = 0; + out: + ds_put_context(context); + return error; } -unsigned long ds_debugctl_mask(void) +int ds_set_pebs_reset(struct task_struct *task, u64 value) { - return ds_cfg.debugctl_mask; -} + struct ds_context *context; + int error; -#ifdef __i386__ -static const struct ds_configuration ds_cfg_netburst = { - .sizeof_ds = 9 * 4, - .bts_buffer_base = { 0, 4 }, - .bts_index = { 4, 4 }, - .bts_absolute_maximum = { 8, 4 }, - .bts_interrupt_threshold = { 12, 4 }, - .sizeof_bts = 3 * 4, - .from_ip = { 0, 4 }, - .to_ip = { 4, 4 }, - .info_type = { 4, 1 }, - .info_data = { 8, 4 }, - .debugctl_mask = (1<<2)|(1<<3) -}; + context = ds_get_context(task); + error = ds_validate_access(context, ds_pebs); + if (error < 0) + goto out; -static const struct ds_configuration ds_cfg_pentium_m = { - .sizeof_ds = 9 * 4, - .bts_buffer_base = { 0, 4 }, - .bts_index = { 4, 4 }, - .bts_absolute_maximum = { 8, 4 }, - .bts_interrupt_threshold = { 12, 4 }, - .sizeof_bts = 3 * 4, - .from_ip = { 0, 4 }, - .to_ip = { 4, 4 }, - .info_type = { 4, 1 }, - .info_data = { 8, 4 }, - .debugctl_mask = (1<<6)|(1<<7) + *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)) = value; + + error = 0; + out: + ds_put_context(context); + return error; +} + +static const struct ds_configuration ds_cfg_var = { + .sizeof_ds = sizeof(long) * 12, + .sizeof_field = sizeof(long), + .sizeof_rec[ds_bts] = sizeof(long) * 3, + .sizeof_rec[ds_pebs] = sizeof(long) * 10 }; -#endif /* _i386_ */ - -static const struct ds_configuration ds_cfg_core2 = { - .sizeof_ds = 9 * 8, - .bts_buffer_base = { 0, 8 }, - .bts_index = { 8, 8 }, - .bts_absolute_maximum = { 16, 8 }, - .bts_interrupt_threshold = { 24, 8 }, - .sizeof_bts = 3 * 8, - .from_ip = { 0, 8 }, - .to_ip = { 8, 8 }, - .info_type = { 8, 1 }, - .info_data = { 16, 8 }, - .debugctl_mask = (1<<6)|(1<<7)|(1<<9) +static const struct ds_configuration ds_cfg_64 = { + .sizeof_ds = 8 * 12, + .sizeof_field = 8, + .sizeof_rec[ds_bts] = 8 * 3, + .sizeof_rec[ds_pebs] = 8 * 10 }; static inline void @@ -429,14 +821,13 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) switch (c->x86) { case 0x6: switch (c->x86_model) { -#ifdef __i386__ case 0xD: case 0xE: /* Pentium M */ - ds_configure(&ds_cfg_pentium_m); + ds_configure(&ds_cfg_var); break; -#endif /* _i386_ */ case 0xF: /* Core2 */ - ds_configure(&ds_cfg_core2); + case 0x1C: /* Atom */ + ds_configure(&ds_cfg_64); break; default: /* sorry, don't know about them */ @@ -445,13 +836,11 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) break; case 0xF: switch (c->x86_model) { -#ifdef __i386__ case 0x0: case 0x1: case 0x2: /* Netburst */ - ds_configure(&ds_cfg_netburst); + ds_configure(&ds_cfg_var); break; -#endif /* _i386_ */ default: /* sorry, don't know about them */ break; @@ -462,3 +851,14 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) break; } } + +void ds_free(struct ds_context *context) +{ + /* This is called when the task owning the parameter context + * is dying. There should not be any user of that context left + * to disturb us, anymore. */ + unsigned long leftovers = context->count; + while (leftovers--) + ds_put_context(context); +} +#endif /* CONFIG_X86_DS */ diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 9af89078f7b..66e48aa2dd1 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p) if (!p) return -EINVAL; - if (!strcmp(p, "exactmap")) { + if (!strncmp(p, "exactmap", 8)) { #ifdef CONFIG_CRASH_DUMP /* * If we are doing a crash dump, we still need to know diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 06cc8d4254b..945a31cdd81 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -414,9 +414,11 @@ void __init efi_init(void) if (memmap.map == NULL) printk(KERN_ERR "Could not map the EFI memory map!\n"); memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); + if (memmap.desc_size != sizeof(efi_memory_desc_t)) - printk(KERN_WARNING "Kernel-defined memdesc" - "doesn't match the one from EFI!\n"); + printk(KERN_WARNING + "Kernel-defined memdesc doesn't match the one from EFI!\n"); + if (add_efi_memmap) do_add_efi_memmap(); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 89434d43960..cf3a0b2d005 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -275,9 +275,9 @@ ENTRY(native_usergs_sysret64) ENTRY(ret_from_fork) CFI_DEFAULT_STACK push kernel_eflags(%rip) - CFI_ADJUST_CFA_OFFSET 4 + CFI_ADJUST_CFA_OFFSET 8 popf # reset kernel eflags - CFI_ADJUST_CFA_OFFSET -4 + CFI_ADJUST_CFA_OFFSET -8 call schedule_tail GET_THREAD_INFO(%rcx) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx) diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 9bfc4d72fb2..d16084f9064 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -108,12 +108,11 @@ void __init x86_64_start_kernel(char * real_mode_data) } load_idt((const struct desc_ptr *)&idt_descr); - early_printk("Kernel alive\n"); + if (console_loglevel == 10) + early_printk("Kernel alive\n"); x86_64_init_pda(); - early_printk("Kernel really alive\n"); - x86_64_start_reservations(real_mode_data); } diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 59fd3b6b130..73deaffadd0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void) /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); + /* 5 usec minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = 5000; /* * Start hpet with the boot cpu mask and make it @@ -270,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode, } static int hpet_legacy_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long cnt; + u32 cnt; cnt = hpet_readl(HPET_COUNTER); - cnt += delta; + cnt += (u32) delta; hpet_writel(cnt, HPET_T0_CMP); - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; + /* + * We need to read back the CMP register to make sure that + * what we wrote hit the chip before we compare it to the + * counter. + */ + WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + + return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } /* diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c index 1c3a66a67f8..720d2607aac 100644 --- a/arch/x86/kernel/io_delay.c +++ b/arch/x86/kernel/io_delay.c @@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "30BF") } }, + { + .callback = dmi_io_delay_0xed_port, + .ident = "Presario F700", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"), + DMI_MATCH(DMI_BOARD_NAME, "30D3") + } + }, { } }; diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c index 50e5e4a31c8..19191430274 100644 --- a/arch/x86/kernel/ioport.c +++ b/arch/x86/kernel/ioport.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/thread_info.h> #include <linux/syscalls.h> +#include <asm/syscalls.h> /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ static void set_bitmap(unsigned long *bitmap, unsigned int base, diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index 3f7537b669d..f1c688e46f3 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -20,6 +20,8 @@ #ifdef CONFIG_X86_32 #include <mach_apic.h> +#include <mach_ipi.h> + /* * the following functions deal with sending IPIs between CPUs. * @@ -147,7 +149,6 @@ void send_IPI_mask_sequence(cpumask_t mask, int vector) } /* must come after the send_IPI functions above for inlining */ -#include <mach_ipi.h> static int convert_apicid_to_cpu(int apic_id) { int i; diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 1cf8c1fcc08..b71e02d42f4 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -325,7 +325,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_call_count); - seq_printf(p, " function call interrupts\n"); + seq_printf(p, " Function call interrupts\n"); seq_printf(p, "TLB: "); for_each_online_cpu(j) seq_printf(p, "%10u ", diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 1f78b238d8d..f065fe9071b 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -129,7 +129,7 @@ skip: seq_printf(p, "CAL: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_call_count); - seq_printf(p, " function call interrupts\n"); + seq_printf(p, " Function call interrupts\n"); seq_printf(p, "TLB: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index f2d43bc7551..ff7d3b0124f 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -139,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) if (PageHighMem(pg)) { data = ioremap_cache(pa_data, sizeof(*data)); if (!data) { + kfree(node); error = -ENXIO; goto err_dir; } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index f47f0eb886b..8282a213968 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -69,6 +69,9 @@ static int gdb_x86vector = -1; */ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = regs->ax; gdb_regs[GDB_BX] = regs->bx; gdb_regs[GDB_CX] = regs->cx; @@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SI] = regs->si; gdb_regs[GDB_DI] = regs->di; gdb_regs[GDB_BP] = regs->bp; - gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_PC] = regs->ip; #ifdef CONFIG_X86_32 + gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; @@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_R13] = regs->r13; gdb_regs[GDB_R14] = regs->r14; gdb_regs[GDB_R15] = regs->r15; + gdb_regs32[GDB_PS] = regs->flags; + gdb_regs32[GDB_CS] = regs->cs; + gdb_regs32[GDB_SS] = regs->ss; #endif gdb_regs[GDB_SP] = regs->sp; } @@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) */ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = 0; gdb_regs[GDB_BX] = 0; gdb_regs[GDB_CX] = 0; @@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; #else - gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); - gdb_regs[GDB_PC] = 0; + gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); + gdb_regs32[GDB_CS] = __KERNEL_CS; + gdb_regs32[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_PC] = p->thread.ip; gdb_regs[GDB_R8] = 0; gdb_regs[GDB_R9] = 0; gdb_regs[GDB_R10] = 0; @@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) */ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif regs->ax = gdb_regs[GDB_AX]; regs->bx = gdb_regs[GDB_BX]; regs->cx = gdb_regs[GDB_CX]; @@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->si = gdb_regs[GDB_SI]; regs->di = gdb_regs[GDB_DI]; regs->bp = gdb_regs[GDB_BP]; - regs->flags = gdb_regs[GDB_PS]; regs->ip = gdb_regs[GDB_PC]; #ifdef CONFIG_X86_32 + regs->flags = gdb_regs[GDB_PS]; regs->ds = gdb_regs[GDB_DS]; regs->es = gdb_regs[GDB_ES]; regs->cs = gdb_regs[GDB_CS]; @@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->r13 = gdb_regs[GDB_R13]; regs->r14 = gdb_regs[GDB_R14]; regs->r15 = gdb_regs[GDB_R15]; + regs->flags = gdb_regs32[GDB_PS]; + regs->cs = gdb_regs32[GDB_CS]; + regs->ss = gdb_regs32[GDB_SS]; #endif } @@ -378,10 +395,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; kgdb_single_step = 1; - if (kgdb_contthread) { - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } get_debugreg(dr6, 6); @@ -466,9 +481,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id() && - user_mode(regs)) - return single_step_cont(regs, args); + raw_smp_processor_id()) { + if (user_mode(regs)) + return single_step_cont(regs, args); + break; + } else if (test_thread_flag(TIF_SINGLESTEP)) + /* This means a user thread is single stepping + * a system call which should be ignored + */ + return NOTIFY_DONE; /* fall through */ default: if (user_mode(regs)) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 8b7a3cf37d2..478bca986ec 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -178,7 +178,7 @@ static void kvm_flush_tlb(void) kvm_deferred_mmu_op(&ftlb, sizeof ftlb); } -static void kvm_release_pt(u32 pfn) +static void kvm_release_pt(unsigned long pfn) { struct kvm_mmu_op_release_pt rpt = { .header.op = KVM_MMU_OP_RELEASE_PT, diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index b68e21f06f4..0ed5f939b90 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -18,6 +18,7 @@ #include <asm/ldt.h> #include <asm/desc.h> #include <asm/mmu_context.h> +#include <asm/syscalls.h> #ifdef CONFIG_SMP static void flush_ldt(void *current_mm) diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index e4393808688..2e2af5d1819 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -72,21 +72,28 @@ static ssize_t msr_read(struct file *file, char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ for (; count; count -= 8) { err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]); - if (err) - return -EIO; - if (copy_to_user(tmp, &data, 8)) - return -EFAULT; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + break; + } + if (copy_to_user(tmp, &data, 8)) { + err = -EFAULT; + break; + } tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static ssize_t msr_write(struct file *file, const char __user *buf, @@ -96,21 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ for (; count; count -= 8) { - if (copy_from_user(&data, tmp, 8)) - return -EFAULT; + if (copy_from_user(&data, tmp, 8)) { + err = -EFAULT; + break; + } err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); - if (err) - return -EIO; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + break; + } tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static int msr_open(struct inode *inode, struct file *file) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index abb78a2cc4a..2c97f07f1c2 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -299,6 +299,15 @@ void acpi_nmi_disable(void) on_each_cpu(__acpi_nmi_disable, NULL, 1); } +/* + * This function is called as soon the LAPIC NMI watchdog driver has everything + * in place and it's ready to check if the NMIs belong to the NMI watchdog + */ +void cpu_nmi_set_wd_enabled(void) +{ + __get_cpu_var(wd_enabled) = 1; +} + void setup_apic_nmi_watchdog(void *unused) { if (__get_cpu_var(wd_enabled)) @@ -311,8 +320,6 @@ void setup_apic_nmi_watchdog(void *unused) switch (nmi_watchdog) { case NMI_LOCAL_APIC: - /* enable it before to avoid race with handler */ - __get_cpu_var(wd_enabled) = 1; if (lapic_watchdog_init(nmi_hz) < 0) { __get_cpu_var(wd_enabled) = 0; return; diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c index 3e667227480..7a13fac63a1 100644 --- a/arch/x86/kernel/olpc.c +++ b/arch/x86/kernel/olpc.c @@ -190,12 +190,12 @@ EXPORT_SYMBOL_GPL(olpc_ec_cmd); static void __init platform_detect(void) { size_t propsize; - u32 rev; + __be32 rev; if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4, &propsize) || propsize != 4) { printk(KERN_ERR "ofw: getprop call failed!\n"); - rev = 0; + rev = cpu_to_be32(0); } olpc_platform_info.boardrev = be32_to_cpu(rev); } @@ -203,7 +203,7 @@ static void __init platform_detect(void) static void __init platform_detect(void) { /* stopgap until OFW support is added to the kernel */ - olpc_platform_info.boardrev = be32_to_cpu(0xc2); + olpc_platform_info.boardrev = 0xc2; } #endif diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 300da17e61c..e2f43768723 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -330,6 +330,7 @@ struct pv_cpu_ops pv_cpu_ops = { #endif .wbinvd = native_wbinvd, .read_msr = native_read_msr_safe, + .read_msr_amd = native_read_msr_amd_safe, .write_msr = native_write_msr_safe, .read_tsc = native_read_tsc, .read_pmc = native_read_pmc, diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c index 58262218781..9fe644f4861 100644 --- a/arch/x86/kernel/paravirt_patch_32.c +++ b/arch/x86/kernel/paravirt_patch_32.c @@ -23,7 +23,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf, start = start_##ops##_##x; \ end = end_##ops##_##x; \ goto patch_site - switch(type) { + switch (type) { PATCH_SITE(pv_irq_ops, irq_disable); PATCH_SITE(pv_irq_ops, irq_enable); PATCH_SITE(pv_irq_ops, restore_fl); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 87d4d6964ec..f704cb51ff8 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -82,7 +82,7 @@ void __init dma32_reserve_bootmem(void) * using 512M as goal */ align = 64ULL<<20; - size = round_up(dma32_bootmem_size, align); + size = roundup(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, 512ULL<<20); if (dma32_bootmem_ptr) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 49285f8fd4d..1a895a58253 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -82,7 +82,8 @@ AGPEXTERN __u32 *agp_gatt_table; static unsigned long next_bit; /* protected by iommu_bitmap_lock */ static int need_flush; /* global flush state. set for each gart wrap */ -static unsigned long alloc_iommu(struct device *dev, int size) +static unsigned long alloc_iommu(struct device *dev, int size, + unsigned long align_mask) { unsigned long offset, flags; unsigned long boundary_size; @@ -90,16 +91,17 @@ static unsigned long alloc_iommu(struct device *dev, int size) base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev), PAGE_SIZE) >> PAGE_SHIFT; - boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, + boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1, PAGE_SIZE) >> PAGE_SHIFT; spin_lock_irqsave(&iommu_bitmap_lock, flags); offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, next_bit, - size, base_index, boundary_size, 0); + size, base_index, boundary_size, align_mask); if (offset == -1) { need_flush = 1; offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, 0, - size, base_index, boundary_size, 0); + size, base_index, boundary_size, + align_mask); } if (offset != -1) { next_bit = offset+size; @@ -236,10 +238,10 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size) * Caller needs to check if the iommu is needed and flush. */ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, - size_t size, int dir) + size_t size, int dir, unsigned long align_mask) { unsigned long npages = iommu_num_pages(phys_mem, size); - unsigned long iommu_page = alloc_iommu(dev, npages); + unsigned long iommu_page = alloc_iommu(dev, npages, align_mask); int i; if (iommu_page == -1) { @@ -262,7 +264,11 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, static dma_addr_t gart_map_simple(struct device *dev, phys_addr_t paddr, size_t size, int dir) { - dma_addr_t map = dma_map_area(dev, paddr, size, dir); + dma_addr_t map; + unsigned long align_mask; + + align_mask = (1UL << get_order(size)) - 1; + map = dma_map_area(dev, paddr, size, dir, align_mask); flush_gart(); @@ -281,7 +287,8 @@ gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir) if (!need_iommu(dev, paddr, size)) return paddr; - bus = gart_map_simple(dev, paddr, size, dir); + bus = dma_map_area(dev, paddr, size, dir, 0); + flush_gart(); return bus; } @@ -340,7 +347,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg, unsigned long addr = sg_phys(s); if (nonforced_iommu(dev, addr, s->length)) { - addr = dma_map_area(dev, addr, s->length, dir); + addr = dma_map_area(dev, addr, s->length, dir, 0); if (addr == bad_dma_address) { if (i > 0) gart_unmap_sg(dev, sg, i, dir); @@ -362,7 +369,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start, int nelems, struct scatterlist *sout, unsigned long pages) { - unsigned long iommu_start = alloc_iommu(dev, pages); + unsigned long iommu_start = alloc_iommu(dev, pages, 0); unsigned long iommu_page = iommu_start; struct scatterlist *s; int i; @@ -626,7 +633,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info) struct pci_dev *dev; void *gatt; int i, error; - unsigned long start_pfn, end_pfn; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -672,12 +678,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info) printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", aper_base, aper_size>>10); - /* need to map that range */ - end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); - if (end_pfn > max_low_pfn_mapped) { - start_pfn = (aper_base>>PAGE_SHIFT); - init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); - } return 0; nommu: @@ -727,7 +727,8 @@ void __init gart_iommu_init(void) { struct agp_kern_info info; unsigned long iommu_start; - unsigned long aper_size; + unsigned long aper_base, aper_size; + unsigned long start_pfn, end_pfn; unsigned long scratch; long i; @@ -765,8 +766,16 @@ void __init gart_iommu_init(void) return; } + /* need to map that range */ + aper_size = info.aper_size << 20; + aper_base = info.aper_base; + end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); + if (end_pfn > max_low_pfn_mapped) { + start_pfn = (aper_base>>PAGE_SHIFT); + init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); + } + printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n"); - aper_size = info.aper_size * 1024 * 1024; iommu_size = check_iommu_size(info.aper_base, aper_size); iommu_pages = iommu_size >> PAGE_SHIFT; diff --git a/arch/x86/kernel/pcspeaker.c b/arch/x86/kernel/pcspeaker.c index bc1f2d3ea27..a311ffcaad1 100644 --- a/arch/x86/kernel/pcspeaker.c +++ b/arch/x86/kernel/pcspeaker.c @@ -1,20 +1,13 @@ #include <linux/platform_device.h> -#include <linux/errno.h> +#include <linux/err.h> #include <linux/init.h> static __init int add_pcspkr(void) { struct platform_device *pd; - int ret; - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; + pd = platform_device_register_simple("pcspkr", -1, NULL, 0); - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; + return IS_ERR(pd) ? PTR_ERR(pd) : 0; } device_initcall(add_pcspkr); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 4e09d26748c..ec7a2ba9bce 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -247,6 +247,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) return 1; } +static cpumask_t c1e_mask = CPU_MASK_NONE; +static int c1e_detected; + +void c1e_remove_cpu(int cpu) +{ + cpu_clear(cpu, c1e_mask); +} + /* * C1E aware idle routine. We check for C1E active in the interrupt * pending message MSR. If we detect C1E, then we handle it the same @@ -254,9 +262,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) */ static void c1e_idle(void) { - static cpumask_t c1e_mask = CPU_MASK_NONE; - static int c1e_detected; - if (need_resched()) return; @@ -266,8 +271,10 @@ static void c1e_idle(void) rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); if (lo & K8_INTP_C1E_ACTIVE_MASK) { c1e_detected = 1; - mark_tsc_unstable("TSC halt in C1E"); - printk(KERN_INFO "System has C1E enabled\n"); + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + mark_tsc_unstable("TSC halt in AMD C1E"); + printk(KERN_INFO "System has AMD C1E enabled\n"); + set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 3b7a1ddcc0b..205188db962 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -37,6 +37,7 @@ #include <linux/tick.h> #include <linux/percpu.h> #include <linux/prctl.h> +#include <linux/dmi.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -55,6 +56,9 @@ #include <asm/tlbflush.h> #include <asm/cpu.h> #include <asm/kdebug.h> +#include <asm/idle.h> +#include <asm/syscalls.h> +#include <asm/smp.h> asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); @@ -88,6 +92,7 @@ static void cpu_exit_clear(void) cpu_clear(cpu, cpu_callin_map); numa_remove_cpu(cpu); + c1e_remove_cpu(cpu); } /* We don't actually take CPU down, just spin without interrupts. */ @@ -159,6 +164,7 @@ void __show_registers(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; unsigned short ss, gs; + const char *board; if (user_mode_vm(regs)) { sp = regs->sp; @@ -171,11 +177,15 @@ void __show_registers(struct pt_regs *regs, int all) } printk("\n"); - printk("Pid: %d, comm: %s %s (%s %.*s)\n", + + board = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!board) + board = ""; + printk("Pid: %d, comm: %s %s (%s %.*s) %s\n", task_pid_nr(current), current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); + init_utsname()->version, board); printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, @@ -275,6 +285,14 @@ void exit_thread(void) tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; put_cpu(); } +#ifdef CONFIG_X86_DS + /* Free any DS contexts that have not been properly released. */ + if (unlikely(current->thread.ds_ctx)) { + /* we clear debugctl to make sure DS is not used. */ + update_debugctlmsr(0); + ds_free(current->thread.ds_ctx); + } +#endif /* CONFIG_X86_DS */ } void flush_thread(void) @@ -436,6 +454,35 @@ int set_tsc_mode(unsigned int val) return 0; } +#ifdef CONFIG_X86_DS +static int update_debugctl(struct thread_struct *prev, + struct thread_struct *next, unsigned long debugctl) +{ + unsigned long ds_prev = 0; + unsigned long ds_next = 0; + + if (prev->ds_ctx) + ds_prev = (unsigned long)prev->ds_ctx->ds; + if (next->ds_ctx) + ds_next = (unsigned long)next->ds_ctx->ds; + + if (ds_next != ds_prev) { + /* we clear debugctl to make sure DS + * is not in use when we change it */ + debugctl = 0; + update_debugctlmsr(0); + wrmsr(MSR_IA32_DS_AREA, ds_next, 0); + } + return debugctl; +} +#else +static int update_debugctl(struct thread_struct *prev, + struct thread_struct *next, unsigned long debugctl) +{ + return debugctl; +} +#endif /* CONFIG_X86_DS */ + static noinline void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, struct tss_struct *tss) @@ -446,14 +493,7 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, prev = &prev_p->thread; next = &next_p->thread; - debugctl = prev->debugctlmsr; - if (next->ds_area_msr != prev->ds_area_msr) { - /* we clear debugctl to make sure DS - * is not in use when we change it */ - debugctl = 0; - update_debugctlmsr(0); - wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0); - } + debugctl = update_debugctl(prev, next, prev->debugctlmsr); if (next->debugctlmsr != debugctl) update_debugctlmsr(next->debugctlmsr); @@ -477,13 +517,13 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, hard_enable_TSC(); } -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 71553b664e2..2a8ccb9238b 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -37,11 +37,11 @@ #include <linux/kdebug.h> #include <linux/tick.h> #include <linux/prctl.h> +#include <linux/uaccess.h> +#include <linux/io.h> -#include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/system.h> -#include <asm/io.h> #include <asm/processor.h> #include <asm/i387.h> #include <asm/mmu_context.h> @@ -51,6 +51,7 @@ #include <asm/proto.h> #include <asm/ia32.h> #include <asm/idle.h> +#include <asm/syscalls.h> asmlinkage extern void ret_from_fork(void); @@ -88,11 +89,13 @@ void exit_idle(void) #ifdef CONFIG_HOTPLUG_CPU DECLARE_PER_CPU(int, cpu_state); -#include <asm/nmi.h> +#include <linux/nmi.h> /* We halt the CPU with physical CPU hotplug */ static inline void play_dead(void) { idle_task_exit(); + c1e_remove_cpu(raw_smp_processor_id()); + mb(); /* Ack it */ __get_cpu_var(cpu_state) = CPU_DEAD; @@ -151,7 +154,7 @@ void cpu_idle(void) } /* Prints also some state that isn't saved in the pt_regs */ -void __show_regs(struct pt_regs * regs) +void __show_regs(struct pt_regs *regs) { unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs; unsigned long d0, d1, d2, d3, d6, d7; @@ -160,59 +163,61 @@ void __show_regs(struct pt_regs * regs) printk("\n"); print_modules(); - printk("Pid: %d, comm: %.20s %s %s %.*s\n", + printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); + printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); - printk("RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->sp, - regs->flags); - printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", + printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, + regs->sp, regs->flags); + printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->ax, regs->bx, regs->cx); - printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", + printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n", regs->dx, regs->si, regs->di); - printk("RBP: %016lx R08: %016lx R09: %016lx\n", + printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n", regs->bp, regs->r8, regs->r9); - printk("R10: %016lx R11: %016lx R12: %016lx\n", - regs->r10, regs->r11, regs->r12); - printk("R13: %016lx R14: %016lx R15: %016lx\n", - regs->r13, regs->r14, regs->r15); - - asm("movl %%ds,%0" : "=r" (ds)); - asm("movl %%cs,%0" : "=r" (cs)); - asm("movl %%es,%0" : "=r" (es)); + printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n", + regs->r10, regs->r11, regs->r12); + printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n", + regs->r13, regs->r14, regs->r15); + + asm("movl %%ds,%0" : "=r" (ds)); + asm("movl %%cs,%0" : "=r" (cs)); + asm("movl %%es,%0" : "=r" (es)); asm("movl %%fs,%0" : "=r" (fsindex)); asm("movl %%gs,%0" : "=r" (gsindex)); rdmsrl(MSR_FS_BASE, fs); - rdmsrl(MSR_GS_BASE, gs); - rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); + rdmsrl(MSR_GS_BASE, gs); + rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); cr0 = read_cr0(); cr2 = read_cr2(); cr3 = read_cr3(); cr4 = read_cr4(); - printk("FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", - fs,fsindex,gs,gsindex,shadowgs); - printk("CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); - printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); + printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", + fs, fsindex, gs, gsindex, shadowgs); + printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, + es, cr0); + printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, + cr4); get_debugreg(d0, 0); get_debugreg(d1, 1); get_debugreg(d2, 2); - printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); + printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); get_debugreg(d3, 3); get_debugreg(d6, 6); get_debugreg(d7, 7); - printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); + printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); } void show_regs(struct pt_regs *regs) { - printk("CPU %d:", smp_processor_id()); + printk(KERN_INFO "CPU %d:", smp_processor_id()); __show_regs(regs); show_trace(NULL, regs, (void *)(regs + 1), regs->bp); } @@ -238,6 +243,14 @@ void exit_thread(void) t->io_bitmap_max = 0; put_cpu(); } +#ifdef CONFIG_X86_DS + /* Free any DS contexts that have not been properly released. */ + if (unlikely(t->ds_ctx)) { + /* we clear debugctl to make sure DS is not used. */ + update_debugctlmsr(0); + ds_free(t->ds_ctx); + } +#endif /* CONFIG_X86_DS */ } void flush_thread(void) @@ -313,10 +326,10 @@ void prepare_to_copy(struct task_struct *tsk) int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, unsigned long unused, - struct task_struct * p, struct pt_regs * regs) + struct task_struct *p, struct pt_regs *regs) { int err; - struct pt_regs * childregs; + struct pt_regs *childregs; struct task_struct *me = current; childregs = ((struct pt_regs *) @@ -361,10 +374,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, if (test_thread_flag(TIF_IA32)) err = do_set_thread_area(p, -1, (struct user_desc __user *)childregs->si, 0); - else -#endif - err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); - if (err) + else +#endif + err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); + if (err) goto out; } err = 0; @@ -471,13 +484,27 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, next = &next_p->thread; debugctl = prev->debugctlmsr; - if (next->ds_area_msr != prev->ds_area_msr) { - /* we clear debugctl to make sure DS - * is not in use when we change it */ - debugctl = 0; - update_debugctlmsr(0); - wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr); + +#ifdef CONFIG_X86_DS + { + unsigned long ds_prev = 0, ds_next = 0; + + if (prev->ds_ctx) + ds_prev = (unsigned long)prev->ds_ctx->ds; + if (next->ds_ctx) + ds_next = (unsigned long)next->ds_ctx->ds; + + if (ds_next != ds_prev) { + /* + * We clear debugctl to make sure DS + * is not in use when we change it: + */ + debugctl = 0; + update_debugctlmsr(0); + wrmsrl(MSR_IA32_DS_AREA, ds_next); + } } +#endif /* CONFIG_X86_DS */ if (next->debugctlmsr != debugctl) update_debugctlmsr(next->debugctlmsr); @@ -515,13 +542,13 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); } -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ } /* @@ -543,7 +570,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) unsigned fsindex, gsindex; /* we're going to use this soon, after a few expensive things */ - if (next_p->fpu_counter>5) + if (next_p->fpu_counter > 5) prefetch(next->xstate); /* @@ -551,13 +578,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ load_sp0(tss, next); - /* + /* * Switch DS and ES. * This won't pick up thread selector changes, but I guess that is ok. */ savesegment(es, prev->es); if (unlikely(next->es | prev->es)) - loadsegment(es, next->es); + loadsegment(es, next->es); savesegment(ds, prev->ds); if (unlikely(next->ds | prev->ds)) @@ -583,7 +610,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ arch_leave_lazy_cpu_mode(); - /* + /* * Switch FS and GS. * * Segment register != 0 always requires a reload. Also @@ -592,13 +619,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ if (unlikely(fsindex | next->fsindex | prev->fs)) { loadsegment(fs, next->fsindex); - /* + /* * Check if the user used a selector != 0; if yes * clear 64bit base, since overloaded base is always * mapped to the Null selector */ if (fsindex) - prev->fs = 0; + prev->fs = 0; } /* when next process has a 64bit base use it */ if (next->fs) @@ -608,7 +635,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) if (unlikely(gsindex | next->gsindex | prev->gs)) { load_gs_index(next->gsindex); if (gsindex) - prev->gs = 0; + prev->gs = 0; } if (next->gs) wrmsrl(MSR_KERNEL_GS_BASE, next->gs); @@ -617,12 +644,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* Must be after DS reload */ unlazy_fpu(prev_p); - /* + /* * Switch the PDA and FPU contexts. */ prev->usersp = read_pda(oldrsp); write_pda(oldrsp, next->usersp); - write_pda(pcurrent, next_p); + write_pda(pcurrent, next_p); write_pda(kernelstack, (unsigned long)task_stack_page(next_p) + @@ -663,7 +690,7 @@ long sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp, struct pt_regs *regs) { long error; - char * filename; + char *filename; filename = getname(name); error = PTR_ERR(filename); @@ -721,55 +748,55 @@ asmlinkage long sys_vfork(struct pt_regs *regs) unsigned long get_wchan(struct task_struct *p) { unsigned long stack; - u64 fp,ip; + u64 fp, ip; int count = 0; - if (!p || p == current || p->state==TASK_RUNNING) - return 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; stack = (unsigned long)task_stack_page(p); if (p->thread.sp < stack || p->thread.sp > stack+THREAD_SIZE) return 0; fp = *(u64 *)(p->thread.sp); - do { + do { if (fp < (unsigned long)stack || fp > (unsigned long)stack+THREAD_SIZE) - return 0; + return 0; ip = *(u64 *)(fp+8); if (!in_sched_functions(ip)) return ip; - fp = *(u64 *)fp; - } while (count++ < 16); + fp = *(u64 *)fp; + } while (count++ < 16); return 0; } long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) -{ - int ret = 0; +{ + int ret = 0; int doit = task == current; int cpu; - switch (code) { + switch (code) { case ARCH_SET_GS: if (addr >= TASK_SIZE_OF(task)) - return -EPERM; + return -EPERM; cpu = get_cpu(); - /* handle small bases via the GDT because that's faster to + /* handle small bases via the GDT because that's faster to switch. */ - if (addr <= 0xffffffff) { - set_32bit_tls(task, GS_TLS, addr); - if (doit) { + if (addr <= 0xffffffff) { + set_32bit_tls(task, GS_TLS, addr); + if (doit) { load_TLS(&task->thread, cpu); - load_gs_index(GS_TLS_SEL); + load_gs_index(GS_TLS_SEL); } - task->thread.gsindex = GS_TLS_SEL; + task->thread.gsindex = GS_TLS_SEL; task->thread.gs = 0; - } else { + } else { task->thread.gsindex = 0; task->thread.gs = addr; if (doit) { load_gs_index(0); ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); - } + } } put_cpu(); break; @@ -823,8 +850,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) rdmsrl(MSR_KERNEL_GS_BASE, base); else base = task->thread.gs; - } - else + } else base = task->thread.gs; ret = put_user(base, (unsigned long __user *)addr); break; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index e37dccce85d..e375b658efc 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/regset.h> +#include <linux/tracehook.h> #include <linux/user.h> #include <linux/elf.h> #include <linux/security.h> @@ -69,7 +70,7 @@ static inline bool invalid_selector(u16 value) #define FLAG_MASK FLAG_MASK_32 -static long *pt_regs_access(struct pt_regs *regs, unsigned long regno) +static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno) { BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0); regno >>= 2; @@ -554,45 +555,115 @@ static int ptrace_set_debugreg(struct task_struct *child, return 0; } -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS +/* + * The configuration for a particular BTS hardware implementation. + */ +struct bts_configuration { + /* the size of a BTS record in bytes; at most BTS_MAX_RECORD_SIZE */ + unsigned char sizeof_bts; + /* the size of a field in the BTS record in bytes */ + unsigned char sizeof_field; + /* a bitmask to enable/disable BTS in DEBUGCTL MSR */ + unsigned long debugctl_mask; +}; +static struct bts_configuration bts_cfg; + +#define BTS_MAX_RECORD_SIZE (8 * 3) + + +/* + * Branch Trace Store (BTS) uses the following format. Different + * architectures vary in the size of those fields. + * - source linear address + * - destination linear address + * - flags + * + * Later architectures use 64bit pointers throughout, whereas earlier + * architectures use 32bit pointers in 32bit mode. + * + * We compute the base address for the first 8 fields based on: + * - the field size stored in the DS configuration + * - the relative field position + * + * In order to store additional information in the BTS buffer, we use + * a special source address to indicate that the record requires + * special interpretation. + * + * Netburst indicated via a bit in the flags field whether the branch + * was predicted; this is ignored. + */ + +enum bts_field { + bts_from = 0, + bts_to, + bts_flags, + + bts_escape = (unsigned long)-1, + bts_qual = bts_to, + bts_jiffies = bts_flags +}; + +static inline unsigned long bts_get(const char *base, enum bts_field field) +{ + base += (bts_cfg.sizeof_field * field); + return *(unsigned long *)base; +} -static int ptrace_bts_get_size(struct task_struct *child) +static inline void bts_set(char *base, enum bts_field field, unsigned long val) { - if (!child->thread.ds_area_msr) - return -ENXIO; + base += (bts_cfg.sizeof_field * field);; + (*(unsigned long *)base) = val; +} - return ds_get_bts_index((void *)child->thread.ds_area_msr); +/* + * Translate a BTS record from the raw format into the bts_struct format + * + * out (out): bts_struct interpretation + * raw: raw BTS record + */ +static void ptrace_bts_translate_record(struct bts_struct *out, const void *raw) +{ + memset(out, 0, sizeof(*out)); + if (bts_get(raw, bts_from) == bts_escape) { + out->qualifier = bts_get(raw, bts_qual); + out->variant.jiffies = bts_get(raw, bts_jiffies); + } else { + out->qualifier = BTS_BRANCH; + out->variant.lbr.from_ip = bts_get(raw, bts_from); + out->variant.lbr.to_ip = bts_get(raw, bts_to); + } } -static int ptrace_bts_read_record(struct task_struct *child, - long index, +static int ptrace_bts_read_record(struct task_struct *child, size_t index, struct bts_struct __user *out) { struct bts_struct ret; - int retval; - int bts_end; - int bts_index; - - if (!child->thread.ds_area_msr) - return -ENXIO; + const void *bts_record; + size_t bts_index, bts_end; + int error; - if (index < 0) - return -EINVAL; + error = ds_get_bts_end(child, &bts_end); + if (error < 0) + return error; - bts_end = ds_get_bts_end((void *)child->thread.ds_area_msr); if (bts_end <= index) return -EINVAL; + error = ds_get_bts_index(child, &bts_index); + if (error < 0) + return error; + /* translate the ptrace bts index into the ds bts index */ - bts_index = ds_get_bts_index((void *)child->thread.ds_area_msr); - bts_index -= (index + 1); - if (bts_index < 0) - bts_index += bts_end; + bts_index += bts_end - (index + 1); + if (bts_end <= bts_index) + bts_index -= bts_end; - retval = ds_read_bts((void *)child->thread.ds_area_msr, - bts_index, &ret); - if (retval < 0) - return retval; + error = ds_access_bts(child, bts_index, &bts_record); + if (error < 0) + return error; + + ptrace_bts_translate_record(&ret, bts_record); if (copy_to_user(out, &ret, sizeof(ret))) return -EFAULT; @@ -600,101 +671,106 @@ static int ptrace_bts_read_record(struct task_struct *child, return sizeof(ret); } -static int ptrace_bts_clear(struct task_struct *child) -{ - if (!child->thread.ds_area_msr) - return -ENXIO; - - return ds_clear((void *)child->thread.ds_area_msr); -} - static int ptrace_bts_drain(struct task_struct *child, long size, struct bts_struct __user *out) { - int end, i; - void *ds = (void *)child->thread.ds_area_msr; - - if (!ds) - return -ENXIO; + struct bts_struct ret; + const unsigned char *raw; + size_t end, i; + int error; - end = ds_get_bts_index(ds); - if (end <= 0) - return end; + error = ds_get_bts_index(child, &end); + if (error < 0) + return error; if (size < (end * sizeof(struct bts_struct))) return -EIO; - for (i = 0; i < end; i++, out++) { - struct bts_struct ret; - int retval; + error = ds_access_bts(child, 0, (const void **)&raw); + if (error < 0) + return error; - retval = ds_read_bts(ds, i, &ret); - if (retval < 0) - return retval; + for (i = 0; i < end; i++, out++, raw += bts_cfg.sizeof_bts) { + ptrace_bts_translate_record(&ret, raw); if (copy_to_user(out, &ret, sizeof(ret))) return -EFAULT; } - ds_clear(ds); + error = ds_clear_bts(child); + if (error < 0) + return error; return end; } +static void ptrace_bts_ovfl(struct task_struct *child) +{ + send_sig(child->thread.bts_ovfl_signal, child, 0); +} + static int ptrace_bts_config(struct task_struct *child, long cfg_size, const struct ptrace_bts_config __user *ucfg) { struct ptrace_bts_config cfg; - int bts_size, ret = 0; - void *ds; + int error = 0; + + error = -EOPNOTSUPP; + if (!bts_cfg.sizeof_bts) + goto errout; + error = -EIO; if (cfg_size < sizeof(cfg)) - return -EIO; + goto errout; + error = -EFAULT; if (copy_from_user(&cfg, ucfg, sizeof(cfg))) - return -EFAULT; + goto errout; - if ((int)cfg.size < 0) - return -EINVAL; + error = -EINVAL; + if ((cfg.flags & PTRACE_BTS_O_SIGNAL) && + !(cfg.flags & PTRACE_BTS_O_ALLOC)) + goto errout; - bts_size = 0; - ds = (void *)child->thread.ds_area_msr; - if (ds) { - bts_size = ds_get_bts_size(ds); - if (bts_size < 0) - return bts_size; - } - cfg.size = PAGE_ALIGN(cfg.size); + if (cfg.flags & PTRACE_BTS_O_ALLOC) { + ds_ovfl_callback_t ovfl = NULL; + unsigned int sig = 0; + + /* we ignore the error in case we were not tracing child */ + (void)ds_release_bts(child); - if (bts_size != cfg.size) { - ret = ptrace_bts_realloc(child, cfg.size, - cfg.flags & PTRACE_BTS_O_CUT_SIZE); - if (ret < 0) + if (cfg.flags & PTRACE_BTS_O_SIGNAL) { + if (!cfg.signal) + goto errout; + + sig = cfg.signal; + ovfl = ptrace_bts_ovfl; + } + + error = ds_request_bts(child, /* base = */ NULL, cfg.size, ovfl); + if (error < 0) goto errout; - ds = (void *)child->thread.ds_area_msr; + child->thread.bts_ovfl_signal = sig; } - if (cfg.flags & PTRACE_BTS_O_SIGNAL) - ret = ds_set_overflow(ds, DS_O_SIGNAL); - else - ret = ds_set_overflow(ds, DS_O_WRAP); - if (ret < 0) + error = -EINVAL; + if (!child->thread.ds_ctx && cfg.flags) goto errout; if (cfg.flags & PTRACE_BTS_O_TRACE) - child->thread.debugctlmsr |= ds_debugctl_mask(); + child->thread.debugctlmsr |= bts_cfg.debugctl_mask; else - child->thread.debugctlmsr &= ~ds_debugctl_mask(); + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; if (cfg.flags & PTRACE_BTS_O_SCHED) set_tsk_thread_flag(child, TIF_BTS_TRACE_TS); else clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); - ret = sizeof(cfg); + error = sizeof(cfg); out: if (child->thread.debugctlmsr) @@ -702,10 +778,10 @@ out: else clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); - return ret; + return error; errout: - child->thread.debugctlmsr &= ~ds_debugctl_mask(); + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); goto out; } @@ -714,29 +790,40 @@ static int ptrace_bts_status(struct task_struct *child, long cfg_size, struct ptrace_bts_config __user *ucfg) { - void *ds = (void *)child->thread.ds_area_msr; struct ptrace_bts_config cfg; + size_t end; + const void *base, *max; + int error; if (cfg_size < sizeof(cfg)) return -EIO; - memset(&cfg, 0, sizeof(cfg)); + error = ds_get_bts_end(child, &end); + if (error < 0) + return error; - if (ds) { - cfg.size = ds_get_bts_size(ds); + error = ds_access_bts(child, /* index = */ 0, &base); + if (error < 0) + return error; - if (ds_get_overflow(ds) == DS_O_SIGNAL) - cfg.flags |= PTRACE_BTS_O_SIGNAL; + error = ds_access_bts(child, /* index = */ end, &max); + if (error < 0) + return error; - if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) && - child->thread.debugctlmsr & ds_debugctl_mask()) - cfg.flags |= PTRACE_BTS_O_TRACE; + memset(&cfg, 0, sizeof(cfg)); + cfg.size = (max - base); + cfg.signal = child->thread.bts_ovfl_signal; + cfg.bts_size = sizeof(struct bts_struct); - if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS)) - cfg.flags |= PTRACE_BTS_O_SCHED; - } + if (cfg.signal) + cfg.flags |= PTRACE_BTS_O_SIGNAL; - cfg.bts_size = sizeof(struct bts_struct); + if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) && + child->thread.debugctlmsr & bts_cfg.debugctl_mask) + cfg.flags |= PTRACE_BTS_O_TRACE; + + if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS)) + cfg.flags |= PTRACE_BTS_O_SCHED; if (copy_to_user(ucfg, &cfg, sizeof(cfg))) return -EFAULT; @@ -744,89 +831,38 @@ static int ptrace_bts_status(struct task_struct *child, return sizeof(cfg); } - static int ptrace_bts_write_record(struct task_struct *child, const struct bts_struct *in) { - int retval; + unsigned char bts_record[BTS_MAX_RECORD_SIZE]; - if (!child->thread.ds_area_msr) - return -ENXIO; + BUG_ON(BTS_MAX_RECORD_SIZE < bts_cfg.sizeof_bts); - retval = ds_write_bts((void *)child->thread.ds_area_msr, in); - if (retval) - return retval; + memset(bts_record, 0, bts_cfg.sizeof_bts); + switch (in->qualifier) { + case BTS_INVALID: + break; - return sizeof(*in); -} + case BTS_BRANCH: + bts_set(bts_record, bts_from, in->variant.lbr.from_ip); + bts_set(bts_record, bts_to, in->variant.lbr.to_ip); + break; -static int ptrace_bts_realloc(struct task_struct *child, - int size, int reduce_size) -{ - unsigned long rlim, vm; - int ret, old_size; + case BTS_TASK_ARRIVES: + case BTS_TASK_DEPARTS: + bts_set(bts_record, bts_from, bts_escape); + bts_set(bts_record, bts_qual, in->qualifier); + bts_set(bts_record, bts_jiffies, in->variant.jiffies); + break; - if (size < 0) + default: return -EINVAL; - - old_size = ds_get_bts_size((void *)child->thread.ds_area_msr); - if (old_size < 0) - return old_size; - - ret = ds_free((void **)&child->thread.ds_area_msr); - if (ret < 0) - goto out; - - size >>= PAGE_SHIFT; - old_size >>= PAGE_SHIFT; - - current->mm->total_vm -= old_size; - current->mm->locked_vm -= old_size; - - if (size == 0) - goto out; - - rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT; - vm = current->mm->total_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->total_vm; - if (size <= 0) - goto out; - } - - rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT; - vm = current->mm->locked_vm + size; - if (rlim < vm) { - ret = -ENOMEM; - - if (!reduce_size) - goto out; - - size = rlim - current->mm->locked_vm; - if (size <= 0) - goto out; } - ret = ds_allocate((void **)&child->thread.ds_area_msr, - size << PAGE_SHIFT); - if (ret < 0) - goto out; - - current->mm->total_vm += size; - current->mm->locked_vm += size; - -out: - if (child->thread.ds_area_msr) - set_tsk_thread_flag(child, TIF_DS_AREA_MSR); - else - clear_tsk_thread_flag(child, TIF_DS_AREA_MSR); - - return ret; + /* The writing task will be the switched-to task on a context + * switch. It needs to write into the switched-from task's BTS + * buffer. */ + return ds_unchecked_write_bts(child, bts_record, bts_cfg.sizeof_bts); } void ptrace_bts_take_timestamp(struct task_struct *tsk, @@ -839,7 +875,66 @@ void ptrace_bts_take_timestamp(struct task_struct *tsk, ptrace_bts_write_record(tsk, &rec); } -#endif /* X86_BTS */ + +static const struct bts_configuration bts_cfg_netburst = { + .sizeof_bts = sizeof(long) * 3, + .sizeof_field = sizeof(long), + .debugctl_mask = (1<<2)|(1<<3)|(1<<5) +}; + +static const struct bts_configuration bts_cfg_pentium_m = { + .sizeof_bts = sizeof(long) * 3, + .sizeof_field = sizeof(long), + .debugctl_mask = (1<<6)|(1<<7) +}; + +static const struct bts_configuration bts_cfg_core2 = { + .sizeof_bts = 8 * 3, + .sizeof_field = 8, + .debugctl_mask = (1<<6)|(1<<7)|(1<<9) +}; + +static inline void bts_configure(const struct bts_configuration *cfg) +{ + bts_cfg = *cfg; +} + +void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 0x6: + switch (c->x86_model) { + case 0xD: + case 0xE: /* Pentium M */ + bts_configure(&bts_cfg_pentium_m); + break; + case 0xF: /* Core2 */ + case 0x1C: /* Atom */ + bts_configure(&bts_cfg_core2); + break; + default: + /* sorry, don't know about them */ + break; + } + break; + case 0xF: + switch (c->x86_model) { + case 0x0: + case 0x1: + case 0x2: /* Netburst */ + bts_configure(&bts_cfg_netburst); + break; + default: + /* sorry, don't know about them */ + break; + } + break; + default: + /* sorry, don't know about them */ + break; + } +} +#endif /* CONFIG_X86_PTRACE_BTS */ /* * Called by kernel/ptrace.c when detaching.. @@ -852,15 +947,15 @@ void ptrace_disable(struct task_struct *child) #ifdef TIF_SYSCALL_EMU clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); #endif - if (child->thread.ds_area_msr) { -#ifdef X86_BTS - ptrace_bts_realloc(child, 0, 0); -#endif - child->thread.debugctlmsr &= ~ds_debugctl_mask(); - if (!child->thread.debugctlmsr) - clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); - clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); - } +#ifdef CONFIG_X86_PTRACE_BTS + (void)ds_release_bts(child); + + child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask; + if (!child->thread.debugctlmsr) + clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); + + clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS); +#endif /* CONFIG_X86_PTRACE_BTS */ } #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION @@ -980,7 +1075,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) /* * These bits need more cooking - not enabled yet: */ -#ifdef X86_BTS +#ifdef CONFIG_X86_PTRACE_BTS case PTRACE_BTS_CONFIG: ret = ptrace_bts_config (child, data, (struct ptrace_bts_config __user *)addr); @@ -992,7 +1087,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_BTS_SIZE: - ret = ptrace_bts_get_size(child); + ret = ds_get_bts_index(child, /* pos = */ NULL); break; case PTRACE_BTS_GET: @@ -1001,14 +1096,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; case PTRACE_BTS_CLEAR: - ret = ptrace_bts_clear(child); + ret = ds_clear_bts(child); break; case PTRACE_BTS_DRAIN: ret = ptrace_bts_drain (child, data, (struct bts_struct __user *) addr); break; -#endif +#endif /* CONFIG_X86_PTRACE_BTS */ default: ret = ptrace_request(child, request, addr, data); @@ -1375,30 +1470,6 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) force_sig_info(SIGTRAP, &info, tsk); } -static void syscall_trace(struct pt_regs *regs) -{ - if (!(current->ptrace & PT_PTRACED)) - return; - -#if 0 - printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n", - current->comm, - regs->ip, regs->sp, regs->ax, regs->orig_ax, __builtin_return_address(0), - current_thread_info()->flags, current->ptrace); -#endif - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} #ifdef CONFIG_X86_32 # define IS_IA32 1 @@ -1432,8 +1503,9 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) ret = -1L; - if (ret || test_thread_flag(TIF_SYSCALL_TRACE)) - syscall_trace(regs); + if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) && + tracehook_report_syscall_entry(regs)) + ret = -1L; if (unlikely(current->audit_context)) { if (IS_IA32) @@ -1459,7 +1531,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); if (test_thread_flag(TIF_SYSCALL_TRACE)) - syscall_trace(regs); + tracehook_report_syscall_exit(regs, 0); /* * If TIF_SYSCALL_EMU is set, we only get here because of @@ -1475,6 +1547,6 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs) * system call instruction. */ if (test_thread_flag(TIF_SINGLESTEP) && - (current->ptrace & PT_PTRACED)) + tracehook_consider_fatal_signal(current, SIGTRAP, SIG_DFL)) send_sigtrap(current, regs, 0); } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 724adfc63cb..f4c93f1cfc1 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -29,7 +29,11 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; static int reboot_mode; -enum reboot_type reboot_type = BOOT_KBD; +/* + * Keyboard reset and triple fault may result in INIT, not RESET, which + * doesn't work when we're in vmx root mode. Try ACPI first. + */ +enum reboot_type reboot_type = BOOT_ACPI; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 362d4e7f2d3..141efab5240 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -223,6 +223,9 @@ unsigned long saved_video_mode; #define RAMDISK_LOAD_FLAG 0x4000 static char __initdata command_line[COMMAND_LINE_SIZE]; +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) struct edd edd; @@ -665,11 +668,28 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + /* append boot loader cmdline to builtin */ + strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + } +#endif +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; parse_early_param(); +#ifdef CONFIG_X86_64 + check_efer(); +#endif + #if defined(CONFIG_VMI) && defined(CONFIG_X86_32) /* * Must be before kernel pagetables are setup @@ -738,7 +758,6 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; - check_efer(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 76e305e064f..0e67f72d931 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -162,9 +162,16 @@ void __init setup_per_cpu_areas(void) printk(KERN_INFO "cpu %d has no node %d or node-local memory\n", cpu, node); + if (ptr) + printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n", + cpu, __pa(ptr)); } - else + else { ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); + if (ptr) + printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n", + cpu, node, __pa(ptr)); + } #endif per_cpu_offset(cpu) = ptr - __per_cpu_start; memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); diff --git a/arch/x86/kernel/sigframe.h b/arch/x86/kernel/sigframe.h index 72bbb519d2d..8b4956e800a 100644 --- a/arch/x86/kernel/sigframe.h +++ b/arch/x86/kernel/sigframe.h @@ -24,4 +24,9 @@ struct rt_sigframe { struct ucontext uc; struct siginfo info; }; + +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs); +int ia32_setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs); #endif diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c index 6fb5bcdd893..2a2435d3037 100644 --- a/arch/x86/kernel/signal_32.c +++ b/arch/x86/kernel/signal_32.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/sched.h> #include <linux/wait.h> +#include <linux/tracehook.h> #include <linux/elf.h> #include <linux/smp.h> #include <linux/mm.h> @@ -26,6 +27,7 @@ #include <asm/uaccess.h> #include <asm/i387.h> #include <asm/vdso.h> +#include <asm/syscalls.h> #include "sigframe.h" @@ -558,8 +560,6 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * handler too. */ regs->flags &= ~X86_EFLAGS_TF; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); @@ -568,6 +568,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + tracehook_signal_handler(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); + return 0; } @@ -661,5 +664,10 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs); + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + clear_thread_flag(TIF_IRET); } diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index ca316b5b742..694aa888bb1 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -15,17 +15,21 @@ #include <linux/errno.h> #include <linux/wait.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/unistd.h> #include <linux/stddef.h> #include <linux/personality.h> #include <linux/compiler.h> +#include <linux/uaccess.h> + #include <asm/processor.h> #include <asm/ucontext.h> -#include <asm/uaccess.h> #include <asm/i387.h> #include <asm/proto.h> #include <asm/ia32_unistd.h> #include <asm/mce.h> +#include <asm/syscall.h> +#include <asm/syscalls.h> #include "sigframe.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -41,11 +45,6 @@ # define FIX_EFLAGS __FIX_EFLAGS #endif -int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs); -int ia32_setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs * regs); - asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) @@ -128,7 +127,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; -#define COPY(x) err |= __get_user(regs->x, &sc->x) +#define COPY(x) (err |= __get_user(regs->x, &sc->x)) COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); COPY(dx); COPY(cx); COPY(ip); @@ -158,7 +157,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, } { - struct _fpstate __user * buf; + struct _fpstate __user *buf; err |= __get_user(buf, &sc->fpstate); if (buf) { @@ -198,7 +197,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) current->blocked = set; recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax)) goto badframe; @@ -208,16 +207,17 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) return ax; badframe: - signal_fault(regs,frame,"sigreturn"); + signal_fault(regs, frame, "sigreturn"); return 0; -} +} /* * Set up a signal frame. */ static inline int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me) +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask, struct task_struct *me) { int err = 0; @@ -273,35 +273,35 @@ get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) } static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs) + sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; - struct _fpstate __user *fp = NULL; + struct _fpstate __user *fp = NULL; int err = 0; struct task_struct *me = current; if (used_math()) { - fp = get_stack(ka, regs, sizeof(struct _fpstate)); + fp = get_stack(ka, regs, sizeof(struct _fpstate)); frame = (void __user *)round_down( (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) goto give_sigsegv; - if (save_i387(fp) < 0) - err |= -1; + if (save_i387(fp) < 0) + err |= -1; } else frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; - if (ka->sa.sa_flags & SA_SIGINFO) { + if (ka->sa.sa_flags & SA_SIGINFO) { err |= copy_siginfo_to_user(&frame->info, info); if (err) goto give_sigsegv; } - + /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); @@ -311,9 +311,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me); err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); - if (sizeof(*set) == 16) { + if (sizeof(*set) == 16) { __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); - __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); + __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); } else err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); @@ -324,7 +324,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); } else { /* could use a vstub here */ - goto give_sigsegv; + goto give_sigsegv; } if (err) @@ -332,7 +332,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up registers for signal handler */ regs->di = sig; - /* In case the signal handler was declared without prototypes */ + /* In case the signal handler was declared without prototypes */ regs->ax = 0; /* This also works for non SA_SIGINFO handlers because they expect the @@ -355,37 +355,8 @@ give_sigsegv: } /* - * Return -1L or the syscall number that @regs is executing. - */ -static long current_syscall(struct pt_regs *regs) -{ - /* - * We always sign-extend a -1 value being set here, - * so this is always either -1L or a syscall number. - */ - return regs->orig_ax; -} - -/* - * Return a value that is -EFOO if the system call in @regs->orig_ax - * returned an error. This only works for @regs from @current. - */ -static long current_syscall_ret(struct pt_regs *regs) -{ -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) - /* - * Sign-extend the value so (int)-EFOO becomes (long)-EFOO - * and will match correctly in comparisons. - */ - return (int) regs->ax; -#endif - return regs->ax; -} - -/* * OK, we're invoking a handler - */ + */ static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, @@ -394,9 +365,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, int ret; /* Are we from a system call? */ - if (current_syscall(regs) >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* If so, check system call restarting.. */ - switch (current_syscall_ret(regs)) { + switch (syscall_get_error(current, regs)) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: regs->ax = -EINTR; @@ -429,7 +400,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); else ret = ia32_setup_frame(sig, ka, oldset, regs); - } else + } else #endif ret = setup_rt_frame(sig, ka, info, oldset, regs); @@ -453,15 +424,16 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * handler too. */ regs->flags &= ~X86_EFLAGS_TF; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); + sigaddset(¤t->blocked, sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + + tracehook_signal_handler(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return ret; @@ -518,9 +490,9 @@ static void do_signal(struct pt_regs *regs) } /* Did we come from a system call? */ - if (current_syscall(regs) >= 0) { + if (syscall_get_nr(current, regs) >= 0) { /* Restart the system call - no handlers present */ - switch (current_syscall_ret(regs)) { + switch (syscall_get_error(current, regs)) { case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: @@ -558,17 +530,23 @@ void do_notify_resume(struct pt_regs *regs, void *unused, /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } } void signal_fault(struct pt_regs *regs, void __user *frame, char *where) -{ - struct task_struct *me = current; +{ + struct task_struct *me = current; if (show_unhandled_signals && printk_ratelimit()) { printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", - me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax); + me->comm, me->pid, where, frame, regs->ip, + regs->sp, regs->orig_ax); print_vma_addr(" in ", regs->ip); printk("\n"); } - force_sig(SIGSEGV, me); -} + force_sig(SIGSEGV, me); +} diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 7985c5b3f91..45531e3ba19 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -88,7 +88,7 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) #define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) #else -struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; +static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; #define get_idle_for_cpu(x) (idle_thread_array[(x)]) #define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p)) #endif @@ -129,7 +129,7 @@ static int boot_cpu_logical_apicid; static cpumask_t cpu_sibling_setup_map; /* Set if we find a B stepping CPU */ -int __cpuinitdata smp_b_stepping; +static int __cpuinitdata smp_b_stepping; #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) @@ -1313,16 +1313,13 @@ __init void prefill_possible_map(void) if (!num_processors) num_processors = 1; -#ifdef CONFIG_HOTPLUG_CPU if (additional_cpus == -1) { if (disabled_cpus > 0) additional_cpus = disabled_cpus; else additional_cpus = 0; } -#else - additional_cpus = 0; -#endif + possible = num_processors + additional_cpus; if (possible > NR_CPUS) possible = NR_CPUS; diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index 7066cb855a6..1884a8d12bf 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -22,6 +22,8 @@ #include <linux/uaccess.h> #include <linux/unistd.h> +#include <asm/syscalls.h> + asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 3b360ef3381..6bc211accf0 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -13,15 +13,17 @@ #include <linux/utsname.h> #include <linux/personality.h> #include <linux/random.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/ia32.h> +#include <asm/syscalls.h> -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off) +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long off) { long error; - struct file * file; + struct file *file; error = -EINVAL; if (off & ~PAGE_MASK) @@ -56,9 +58,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin, unmapped base down for this case. This can give conflicts with the heap, but we assume that glibc malloc knows how to fall back to mmap. Give it 1GB - of playground for now. -AK */ - *begin = 0x40000000; - *end = 0x80000000; + of playground for now. -AK */ + *begin = 0x40000000; + *end = 0x80000000; if (current->flags & PF_RANDOMIZE) { new_begin = randomize_range(*begin, *begin + 0x02000000, 0); if (new_begin) @@ -66,9 +68,9 @@ static void find_start_end(unsigned long flags, unsigned long *begin, } } else { *begin = TASK_UNMAPPED_BASE; - *end = TASK_SIZE; + *end = TASK_SIZE; } -} +} unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, @@ -78,11 +80,11 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct vm_area_struct *vma; unsigned long start_addr; unsigned long begin, end; - + if (flags & MAP_FIXED) return addr; - find_start_end(flags, &begin, &end); + find_start_end(flags, &begin, &end); if (len > end) return -ENOMEM; @@ -96,12 +98,12 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, } if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32)) && len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; + mm->cached_hole_size = 0; mm->free_area_cache = begin; } addr = mm->free_area_cache; - if (addr < begin) - addr = begin; + if (addr < begin) + addr = begin; start_addr = addr; full_search: @@ -127,7 +129,7 @@ full_search: return addr; } if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; } @@ -177,7 +179,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr-len); if (!vma || addr <= vma->vm_start) /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); + return mm->free_area_cache = addr-len; } if (mm->mmap_base < len) @@ -194,7 +196,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, vma = find_vma(mm, addr); if (!vma || addr+len <= vma->vm_start) /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + return mm->free_area_cache = addr; /* remember the largest hole we saw so far */ if (addr + mm->cached_hole_size < vma->vm_start) @@ -224,13 +226,13 @@ bottomup: } -asmlinkage long sys_uname(struct new_utsname __user * name) +asmlinkage long sys_uname(struct new_utsname __user *name) { int err; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - if (personality(current->personality) == PER_LINUX32) - err |= copy_to_user(&name->machine, "i686", 5); + if (personality(current->personality) == PER_LINUX32) + err |= copy_to_user(&name->machine, "i686", 5); return err ? -EFAULT : 0; } diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c index 170d43c1748..3d1be4f0fac 100644 --- a/arch/x86/kernel/syscall_64.c +++ b/arch/x86/kernel/syscall_64.c @@ -8,12 +8,12 @@ #define __NO_STUBS #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H #include <asm/unistd_64.h> #undef __SYSCALL #define __SYSCALL(nr, sym) [nr] = sym, -#undef _ASM_X86_64_UNISTD_H_ +#undef ASM_X86__UNISTD_64_H typedef void (*sys_call_ptr_t)(void); diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index ffe3c664afc..bbecf8b6bf9 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -36,6 +36,7 @@ #include <asm/arch_hooks.h> #include <asm/hpet.h> #include <asm/time.h> +#include <asm/timer.h> #include "do_timer.h" diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c index ab6bf375a30..6bb7b8579e7 100644 --- a/arch/x86/kernel/tls.c +++ b/arch/x86/kernel/tls.c @@ -10,6 +10,7 @@ #include <asm/ldt.h> #include <asm/processor.h> #include <asm/proto.h> +#include <asm/syscalls.h> #include "tls.h" diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 513caaca711..7a31f104bef 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -32,6 +32,8 @@ #include <linux/bug.h> #include <linux/nmi.h> #include <linux/mm.h> +#include <linux/smp.h> +#include <linux/io.h> #if defined(CONFIG_EDAC) #include <linux/edac.h> @@ -45,9 +47,6 @@ #include <asm/unwind.h> #include <asm/desc.h> #include <asm/i387.h> -#include <asm/nmi.h> -#include <asm/smp.h> -#include <asm/io.h> #include <asm/pgalloc.h> #include <asm/proto.h> #include <asm/pda.h> @@ -85,7 +84,8 @@ static inline void preempt_conditional_cli(struct pt_regs *regs) void printk_address(unsigned long address, int reliable) { - printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address); + printk(" [<%016lx>] %s%pS\n", + address, reliable ? "" : "? ", (void *) address); } static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, @@ -98,7 +98,8 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, [STACKFAULT_STACK - 1] = "#SS", [MCE_STACK - 1] = "#MC", #if DEBUG_STKSZ > EXCEPTION_STKSZ - [N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" + [N_EXCEPTION_STACKS ... + N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" #endif }; unsigned k; @@ -163,7 +164,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, } /* - * x86-64 can have up to three kernel stacks: + * x86-64 can have up to three kernel stacks: * process stack * interrupt stack * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack @@ -219,7 +220,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, const struct stacktrace_ops *ops, void *data) { const unsigned cpu = get_cpu(); - unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr; + unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr; unsigned used = 0; struct thread_info *tinfo; @@ -237,7 +238,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, if (!bp) { if (task == current) { /* Grab bp right from our regs */ - asm("movq %%rbp, %0" : "=r" (bp) :); + asm("movq %%rbp, %0" : "=r" (bp) : ); } else { /* bp is the last reg pushed by switch_to */ bp = *(unsigned long *) task->thread.sp; @@ -339,9 +340,8 @@ static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, char *log_lvl) { - printk("\nCall Trace:\n"); + printk("Call Trace:\n"); dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); - printk("\n"); } void show_trace(struct task_struct *task, struct pt_regs *regs, @@ -357,11 +357,15 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack; int i; const int cpu = smp_processor_id(); - unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); - unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); + unsigned long *irqstack_end = + (unsigned long *) (cpu_pda(cpu)->irqstackptr); + unsigned long *irqstack = + (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); - // debugging aid: "show_stack(NULL, NULL);" prints the - // back trace for this cpu. + /* + * debugging aid: "show_stack(NULL, NULL);" prints the + * back trace for this cpu. + */ if (sp == NULL) { if (task) @@ -386,6 +390,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, printk(" %016lx", *stack++); touch_nmi_watchdog(); } + printk("\n"); show_trace_log_lvl(task, regs, sp, bp, log_lvl); } @@ -404,7 +409,7 @@ void dump_stack(void) #ifdef CONFIG_FRAME_POINTER if (!bp) - asm("movq %%rbp, %0" : "=r" (bp):); + asm("movq %%rbp, %0" : "=r" (bp) : ); #endif printk("Pid: %d, comm: %.20s %s %s %.*s\n", @@ -414,7 +419,6 @@ void dump_stack(void) init_utsname()->version); show_trace(NULL, NULL, &stack, bp); } - EXPORT_SYMBOL(dump_stack); void show_registers(struct pt_regs *regs) @@ -443,7 +447,6 @@ void show_registers(struct pt_regs *regs) printk("Stack: "); show_stack_log_lvl(NULL, regs, (unsigned long *)sp, regs->bp, ""); - printk("\n"); printk(KERN_EMERG "Code: "); @@ -493,7 +496,7 @@ unsigned __kprobes long oops_begin(void) raw_local_irq_save(flags); cpu = smp_processor_id(); if (!__raw_spin_trylock(&die_lock)) { - if (cpu == die_owner) + if (cpu == die_owner) /* nested oops. should stop eventually */; else __raw_spin_lock(&die_lock); @@ -638,7 +641,7 @@ kernel_trap: } #define DO_ERROR(trapnr, signr, str, name) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ +asmlinkage void do_##name(struct pt_regs *regs, long error_code) \ { \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ @@ -648,7 +651,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ } #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ +asmlinkage void do_##name(struct pt_regs *regs, long error_code) \ { \ siginfo_t info; \ info.si_signo = signr; \ @@ -683,7 +686,7 @@ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) preempt_conditional_cli(regs); } -asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) +asmlinkage void do_double_fault(struct pt_regs *regs, long error_code) { static const char str[] = "double fault"; struct task_struct *tsk = current; @@ -778,9 +781,10 @@ io_check_error(unsigned char reason, struct pt_regs *regs) } static notrace __kprobes void -unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +unknown_nmi_error(unsigned char reason, struct pt_regs *regs) { - if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == + NOTIFY_STOP) return; printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", reason); @@ -882,7 +886,7 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) else if (user_mode(eregs)) regs = task_pt_regs(current); /* Exception from kernel and interrupts are enabled. Move to - kernel process stack. */ + kernel process stack. */ else if (eregs->flags & X86_EFLAGS_IF) regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs)); if (eregs != regs) @@ -891,7 +895,7 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) } /* runs on IST stack. */ -asmlinkage void __kprobes do_debug(struct pt_regs * regs, +asmlinkage void __kprobes do_debug(struct pt_regs *regs, unsigned long error_code) { struct task_struct *tsk = current; @@ -1035,7 +1039,7 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs) asmlinkage void bad_intr(void) { - printk("bad interrupt"); + printk("bad interrupt"); } asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) @@ -1047,7 +1051,7 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) conditional_sti(regs); if (!user_mode(regs) && - kernel_math_error(regs, "kernel simd math error", 19)) + kernel_math_error(regs, "kernel simd math error", 19)) return; /* @@ -1092,7 +1096,7 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) force_sig_info(SIGFPE, &info, task); } -asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs) +asmlinkage void do_spurious_interrupt_bug(struct pt_regs *regs) { } @@ -1149,8 +1153,10 @@ void __init trap_init(void) set_intr_gate(0, ÷_error); set_intr_gate_ist(1, &debug, DEBUG_STACK); set_intr_gate_ist(2, &nmi, NMI_STACK); - set_system_gate_ist(3, &int3, DEBUG_STACK); /* int3 can be called from all */ - set_system_gate(4, &overflow); /* int4 can be called from all */ + /* int3 can be called from all */ + set_system_gate_ist(3, &int3, DEBUG_STACK); + /* int4 can be called from all */ + set_system_gate(4, &overflow); set_intr_gate(5, &bounds); set_intr_gate(6, &invalid_op); set_intr_gate(7, &device_not_available); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 8e786b0d665..161bb850fc4 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -104,7 +104,7 @@ __setup("notsc", notsc_setup); /* * Read TSC and the reference counters. Take care of SMI disturbance */ -static u64 tsc_read_refs(u64 *pm, u64 *hpet) +static u64 tsc_read_refs(u64 *p, int hpet) { u64 t1, t2; int i; @@ -112,9 +112,9 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet) for (i = 0; i < MAX_RETRIES; i++) { t1 = get_cycles(); if (hpet) - *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; + *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; else - *pm = acpi_pm_read_early(); + *p = acpi_pm_read_early(); t2 = get_cycles(); if ((t2 - t1) < SMI_TRESHOLD) return t2; @@ -122,80 +122,390 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet) return ULLONG_MAX; } -/** - * native_calibrate_tsc - calibrate the tsc on boot +/* + * Calculate the TSC frequency from HPET reference */ -unsigned long native_calibrate_tsc(void) +static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2) { - unsigned long flags; - u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2; - int hpet = is_hpet_enabled(); - unsigned int tsc_khz_val = 0; + u64 tmp; - local_irq_save(flags); + if (hpet2 < hpet1) + hpet2 += 0x100000000ULL; + hpet2 -= hpet1; + tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); + do_div(tmp, 1000000); + do_div(deltatsc, tmp); + + return (unsigned long) deltatsc; +} + +/* + * Calculate the TSC frequency from PMTimer reference + */ +static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2) +{ + u64 tmp; - tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); + if (!pm1 && !pm2) + return ULONG_MAX; + if (pm2 < pm1) + pm2 += (u64)ACPI_PM_OVRRUN; + pm2 -= pm1; + tmp = pm2 * 1000000000LL; + do_div(tmp, PMTMR_TICKS_PER_SEC); + do_div(deltatsc, tmp); + + return (unsigned long) deltatsc; +} + +#define CAL_MS 10 +#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS)) +#define CAL_PIT_LOOPS 1000 + +#define CAL2_MS 50 +#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS)) +#define CAL2_PIT_LOOPS 5000 + + +/* + * Try to calibrate the TSC against the Programmable + * Interrupt Timer and return the frequency of the TSC + * in kHz. + * + * Return ULONG_MAX on failure to calibrate. + */ +static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin) +{ + u64 tsc, t1, t2, delta; + unsigned long tscmin, tscmax; + int pitcnt; + + /* Set the Gate high, disable speaker */ outb((inb(0x61) & ~0x02) | 0x01, 0x61); + /* + * Setup CTC channel 2* for mode 0, (interrupt on terminal + * count mode), binary count. Set the latch register to 50ms + * (LSB then MSB) to begin countdown. + */ outb(0xb0, 0x43); - outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); - tr1 = get_cycles(); - while ((inb(0x61) & 0x20) == 0); - tr2 = get_cycles(); + outb(latch & 0xff, 0x42); + outb(latch >> 8, 0x42); + + tsc = t1 = t2 = get_cycles(); + + pitcnt = 0; + tscmax = 0; + tscmin = ULONG_MAX; + while ((inb(0x61) & 0x20) == 0) { + t2 = get_cycles(); + delta = t2 - tsc; + tsc = t2; + if ((unsigned long) delta < tscmin) + tscmin = (unsigned int) delta; + if ((unsigned long) delta > tscmax) + tscmax = (unsigned int) delta; + pitcnt++; + } + + /* + * Sanity checks: + * + * If we were not able to read the PIT more than loopmin + * times, then we have been hit by a massive SMI + * + * If the maximum is 10 times larger than the minimum, + * then we got hit by an SMI as well. + */ + if (pitcnt < loopmin || tscmax > 10 * tscmin) + return ULONG_MAX; - tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); + /* Calculate the PIT value */ + delta = t2 - t1; + do_div(delta, ms); + return delta; +} +/* + * This reads the current MSB of the PIT counter, and + * checks if we are running on sufficiently fast and + * non-virtualized hardware. + * + * Our expectations are: + * + * - the PIT is running at roughly 1.19MHz + * + * - each IO is going to take about 1us on real hardware, + * but we allow it to be much faster (by a factor of 10) or + * _slightly_ slower (ie we allow up to a 2us read+counter + * update - anything else implies a unacceptably slow CPU + * or PIT for the fast calibration to work. + * + * - with 256 PIT ticks to read the value, we have 214us to + * see the same MSB (and overhead like doing a single TSC + * read per MSB value etc). + * + * - We're doing 2 reads per loop (LSB, MSB), and we expect + * them each to take about a microsecond on real hardware. + * So we expect a count value of around 100. But we'll be + * generous, and accept anything over 50. + * + * - if the PIT is stuck, and we see *many* more reads, we + * return early (and the next caller of pit_expect_msb() + * then consider it a failure when they don't see the + * next expected value). + * + * These expectations mean that we know that we have seen the + * transition from one expected value to another with a fairly + * high accuracy, and we didn't miss any events. We can thus + * use the TSC value at the transitions to calculate a pretty + * good value for the TSC frequencty. + */ +static inline int pit_expect_msb(unsigned char val) +{ + int count = 0; + + for (count = 0; count < 50000; count++) { + /* Ignore LSB */ + inb(0x42); + if (inb(0x42) != val) + break; + } + return count > 50; +} + +/* + * How many MSB values do we want to see? We aim for a + * 15ms calibration, which assuming a 2us counter read + * error should give us roughly 150 ppm precision for + * the calibration. + */ +#define QUICK_PIT_MS 15 +#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256) + +static unsigned long quick_pit_calibrate(void) +{ + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Counter 2, mode 0 (one-shot), binary count + * + * NOTE! Mode 2 decrements by two (and then the + * output is flipped each time, giving the same + * final output frequency as a decrement-by-one), + * so mode 0 is much better when looking at the + * individual counts. + */ + outb(0xb0, 0x43); + + /* Start at 0xffff */ + outb(0xff, 0x42); + outb(0xff, 0x42); + + if (pit_expect_msb(0xff)) { + int i; + u64 t1, t2, delta; + unsigned char expect = 0xfe; + + t1 = get_cycles(); + for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) { + if (!pit_expect_msb(expect)) + goto failed; + } + t2 = get_cycles(); + + /* + * Make sure we can rely on the second TSC timestamp: + */ + if (!pit_expect_msb(expect)) + goto failed; + + /* + * Ok, if we get here, then we've seen the + * MSB of the PIT decrement QUICK_PIT_ITERATIONS + * times, and each MSB had many hits, so we never + * had any sudden jumps. + * + * As a result, we can depend on there not being + * any odd delays anywhere, and the TSC reads are + * reliable. + * + * kHz = ticks / time-in-seconds / 1000; + * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000 + * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000) + */ + delta = (t2 - t1)*PIT_TICK_RATE; + do_div(delta, QUICK_PIT_ITERATIONS*256*1000); + printk("Fast TSC calibration using PIT\n"); + return delta; + } +failed: + return 0; +} + +/** + * native_calibrate_tsc - calibrate the tsc on boot + */ +unsigned long native_calibrate_tsc(void) +{ + u64 tsc1, tsc2, delta, ref1, ref2; + unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; + unsigned long flags, latch, ms, fast_calibrate; + int hpet = is_hpet_enabled(), i, loopmin; + + local_irq_save(flags); + fast_calibrate = quick_pit_calibrate(); local_irq_restore(flags); + if (fast_calibrate) + return fast_calibrate; /* - * Preset the result with the raw and inaccurate PIT - * calibration value + * Run 5 calibration loops to get the lowest frequency value + * (the best estimate). We use two different calibration modes + * here: + * + * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and + * load a timeout of 50ms. We read the time right after we + * started the timer and wait until the PIT count down reaches + * zero. In each wait loop iteration we read the TSC and check + * the delta to the previous read. We keep track of the min + * and max values of that delta. The delta is mostly defined + * by the IO time of the PIT access, so we can detect when a + * SMI/SMM disturbance happend between the two reads. If the + * maximum time is significantly larger than the minimum time, + * then we discard the result and have another try. + * + * 2) Reference counter. If available we use the HPET or the + * PMTIMER as a reference to check the sanity of that value. + * We use separate TSC readouts and check inside of the + * reference read for a SMI/SMM disturbance. We dicard + * disturbed values here as well. We do that around the PIT + * calibration delay loop as we have to wait for a certain + * amount of time anyway. */ - delta = (tr2 - tr1); - do_div(delta, 50); - tsc_khz_val = delta; - - /* hpet or pmtimer available ? */ - if (!hpet && !pm1 && !pm2) { - printk(KERN_INFO "TSC calibrated against PIT\n"); - goto out; + + /* Preset PIT loop values */ + latch = CAL_LATCH; + ms = CAL_MS; + loopmin = CAL_PIT_LOOPS; + + for (i = 0; i < 3; i++) { + unsigned long tsc_pit_khz; + + /* + * Read the start value and the reference count of + * hpet/pmtimer when available. Then do the PIT + * calibration, which will take at least 50ms, and + * read the end value. + */ + local_irq_save(flags); + tsc1 = tsc_read_refs(&ref1, hpet); + tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin); + tsc2 = tsc_read_refs(&ref2, hpet); + local_irq_restore(flags); + + /* Pick the lowest PIT TSC calibration so far */ + tsc_pit_min = min(tsc_pit_min, tsc_pit_khz); + + /* hpet or pmtimer available ? */ + if (!hpet && !ref1 && !ref2) + continue; + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) + continue; + + tsc2 = (tsc2 - tsc1) * 1000000LL; + if (hpet) + tsc2 = calc_hpet_ref(tsc2, ref1, ref2); + else + tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2); + + tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2); + + /* Check the reference deviation */ + delta = ((u64) tsc_pit_min) * 100; + do_div(delta, tsc_ref_min); + + /* + * If both calibration results are inside a 10% window + * then we can be sure, that the calibration + * succeeded. We break out of the loop right away. We + * use the reference value, as it is more precise. + */ + if (delta >= 90 && delta <= 110) { + printk(KERN_INFO + "TSC: PIT calibration matches %s. %d loops\n", + hpet ? "HPET" : "PMTIMER", i + 1); + return tsc_ref_min; + } + + /* + * Check whether PIT failed more than once. This + * happens in virtualized environments. We need to + * give the virtual PC a slightly longer timeframe for + * the HPET/PMTIMER to make the result precise. + */ + if (i == 1 && tsc_pit_min == ULONG_MAX) { + latch = CAL2_LATCH; + ms = CAL2_MS; + loopmin = CAL2_PIT_LOOPS; + } } - /* Check, whether the sampling was disturbed by an SMI */ - if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) { - printk(KERN_WARNING "TSC calibration disturbed by SMI, " - "using PIT calibration result\n"); - goto out; + /* + * Now check the results. + */ + if (tsc_pit_min == ULONG_MAX) { + /* PIT gave no useful value */ + printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n"); + + /* We don't have an alternative source, disable TSC */ + if (!hpet && !ref1 && !ref2) { + printk("TSC: No reference (HPET/PMTIMER) available\n"); + return 0; + } + + /* The alternative source failed as well, disable TSC */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration " + "failed.\n"); + return 0; + } + + /* Use the alternative source */ + printk(KERN_INFO "TSC: using %s reference calibration\n", + hpet ? "HPET" : "PMTIMER"); + + return tsc_ref_min; } - tsc2 = (tsc2 - tsc1) * 1000000LL; - - if (hpet) { - printk(KERN_INFO "TSC calibrated against HPET\n"); - if (hpet2 < hpet1) - hpet2 += 0x100000000ULL; - hpet2 -= hpet1; - tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); - do_div(tsc1, 1000000); - } else { - printk(KERN_INFO "TSC calibrated against PM_TIMER\n"); - if (pm2 < pm1) - pm2 += (u64)ACPI_PM_OVRRUN; - pm2 -= pm1; - tsc1 = pm2 * 1000000000LL; - do_div(tsc1, PMTMR_TICKS_PER_SEC); + /* We don't have an alternative source, use the PIT calibration value */ + if (!hpet && !ref1 && !ref2) { + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; } - do_div(tsc2, tsc1); - tsc_khz_val = tsc2; + /* The alternative source failed, use the PIT calibration value */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. " + "Using PIT calibration\n"); + return tsc_pit_min; + } -out: - return tsc_khz_val; + /* + * The calibration values differ too much. In doubt, we use + * the PIT value as we know that there are PMTIMERs around + * running at double speed. At least we let the user know: + */ + printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n", + hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min); + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; } - #ifdef CONFIG_X86_32 /* Only called from the Powernow K7 cpu freq driver */ int recalibrate_cpu_khz(void) diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c index 594ef47f0a6..61a97e616f7 100644 --- a/arch/x86/kernel/visws_quirks.c +++ b/arch/x86/kernel/visws_quirks.c @@ -25,45 +25,31 @@ #include <asm/visws/cobalt.h> #include <asm/visws/piix4.h> #include <asm/arch_hooks.h> +#include <asm/io_apic.h> #include <asm/fixmap.h> #include <asm/reboot.h> #include <asm/setup.h> #include <asm/e820.h> -#include <asm/smp.h> #include <asm/io.h> #include <mach_ipi.h> #include "mach_apic.h" -#include <linux/init.h> -#include <linux/smp.h> - #include <linux/kernel_stat.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/apic.h> #include <asm/i8259.h> #include <asm/irq_vectors.h> -#include <asm/visws/cobalt.h> #include <asm/visws/lithium.h> -#include <asm/visws/piix4.h> #include <linux/sched.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/pci.h> #include <linux/pci_ids.h> extern int no_broadcast; -#include <asm/io.h> #include <asm/apic.h> -#include <asm/arch_hooks.h> -#include <asm/visws/cobalt.h> -#include <asm/visws/lithium.h> char visws_board_type = -1; char visws_board_rev = -1; diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c index 38f566fa27d..4eeb5cf9720 100644 --- a/arch/x86/kernel/vm86_32.c +++ b/arch/x86/kernel/vm86_32.c @@ -46,6 +46,7 @@ #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/irq.h> +#include <asm/syscalls.h> /* * Known problems: diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 6ca515d6db5..8c9ad02af5a 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, @@ -393,13 +393,13 @@ static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type) } #endif -static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn) { vmi_set_page_type(pfn, VMI_PAGE_L1); vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); } -static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn) +static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn) { /* * This call comes in very early, before mem_map is setup. @@ -410,20 +410,20 @@ static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn) vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); } -static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count) { vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); vmi_check_page_type(clonepfn, VMI_PAGE_L2); vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); } -static void vmi_release_pte(u32 pfn) +static void vmi_release_pte(unsigned long pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L1); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); } -static void vmi_release_pmd(u32 pfn) +static void vmi_release_pmd(unsigned long pfn) { vmi_ops.release_page(pfn, VMI_PAGE_L2); vmi_set_page_type(pfn, VMI_PAGE_NORMAL); diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index 0c029e8959c..7766d36983f 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -61,7 +61,7 @@ static void vsmp_irq_enable(void) native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); } -static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf, +static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { switch (type) { diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 0bfe2bd305e..3da2508eb22 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -711,6 +711,10 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) u64 *spte; int young = 0; + /* always return old for EPT */ + if (!shadow_accessed_mask) + return 0; + spte = rmap_next(kvm, rmapp, NULL); while (spte) { int _young; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index e2ee264740c..8233b86c778 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -62,6 +62,7 @@ static int npt = 1; module_param(npt, int, S_IRUGO); static void kvm_reput_irq(struct vcpu_svm *svm); +static void svm_flush_tlb(struct kvm_vcpu *vcpu); static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu) { @@ -878,6 +879,10 @@ set: static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE; + unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4; + + if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE)) + force_new_asid(vcpu); vcpu->arch.cr4 = cr4; if (!npt_enabled) @@ -1027,6 +1032,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code, (u32)fault_address, (u32)(fault_address >> 32), handler); + /* + * FIXME: Tis shouldn't be necessary here, but there is a flush + * missing in the MMU code. Until we find this bug, flush the + * complete TLB here on an NPF + */ + if (npt_enabled) + svm_flush_tlb(&svm->vcpu); if (event_injection) kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2a69773e3b2..7041cc52b56 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3301,8 +3301,7 @@ static int __init vmx_init(void) kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | VMX_EPT_WRITABLE_MASK | VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); - kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, - VMX_EPT_FAKE_DIRTY_MASK, 0ull, + kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull, VMX_EPT_EXECUTABLE_MASK); kvm_enable_tdp(); } else diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 425a13436b3..23e8373507a 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -370,8 +370,6 @@ enum vmcs_field { #define VMX_EPT_READABLE_MASK 0x1ull #define VMX_EPT_WRITABLE_MASK 0x2ull #define VMX_EPT_EXECUTABLE_MASK 0x4ull -#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62) -#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63) #define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c index d5a2b39f882..321cf720dbb 100644 --- a/arch/x86/lib/msr-on-cpu.c +++ b/arch/x86/lib/msr-on-cpu.c @@ -16,36 +16,46 @@ static void __rdmsr_on_cpu(void *info) rdmsr(rv->msr_no, rv->l, rv->h); } -static void __rdmsr_safe_on_cpu(void *info) +static void __wrmsr_on_cpu(void *info) { struct msr_info *rv = info; - rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h); + wrmsr(rv->msr_no, rv->l, rv->h); } -static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe) +int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) { - int err = 0; + int err; struct msr_info rv; rv.msr_no = msr_no; - if (safe) { - smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); - err = rv.err; - } else { - smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); - } + err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); *l = rv.l; *h = rv.h; return err; } -static void __wrmsr_on_cpu(void *info) +int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) +{ + int err; + struct msr_info rv; + + rv.msr_no = msr_no; + rv.l = l; + rv.h = h; + err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); + + return err; +} + +/* These "safe" variants are slower and should be used when the target MSR + may not actually exist. */ +static void __rdmsr_safe_on_cpu(void *info) { struct msr_info *rv = info; - wrmsr(rv->msr_no, rv->l, rv->h); + rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h); } static void __wrmsr_safe_on_cpu(void *info) @@ -55,44 +65,30 @@ static void __wrmsr_safe_on_cpu(void *info) rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h); } -static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe) +int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) { - int err = 0; + int err; struct msr_info rv; rv.msr_no = msr_no; - rv.l = l; - rv.h = h; - if (safe) { - smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); - err = rv.err; - } else { - smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); - } - - return err; -} - -void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) -{ - _wrmsr_on_cpu(cpu, msr_no, l, h, 0); -} + err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); + *l = rv.l; + *h = rv.h; -void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) -{ - _rdmsr_on_cpu(cpu, msr_no, l, h, 0); + return err ? err : rv.err; } -/* These "safe" variants are slower and should be used when the target MSR - may not actually exist. */ int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) { - return _wrmsr_on_cpu(cpu, msr_no, l, h, 1); -} + int err; + struct msr_info rv; -int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) -{ - return _rdmsr_on_cpu(cpu, msr_no, l, h, 1); + rv.msr_no = msr_no; + rv.l = l; + rv.h = h; + err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); + + return err ? err : rv.err; } EXPORT_SYMBOL(rdmsr_on_cpu); diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c index 94972e7c094..82004d2bf05 100644 --- a/arch/x86/lib/string_32.c +++ b/arch/x86/lib/string_32.c @@ -22,7 +22,7 @@ char *strcpy(char *dest, const char *src) "testb %%al,%%al\n\t" "jne 1b" : "=&S" (d0), "=&D" (d1), "=&a" (d2) - :"0" (src), "1" (dest) : "memory"); + : "0" (src), "1" (dest) : "memory"); return dest; } EXPORT_SYMBOL(strcpy); @@ -42,7 +42,7 @@ char *strncpy(char *dest, const char *src, size_t count) "stosb\n" "2:" : "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3) - :"0" (src), "1" (dest), "2" (count) : "memory"); + : "0" (src), "1" (dest), "2" (count) : "memory"); return dest; } EXPORT_SYMBOL(strncpy); @@ -60,7 +60,7 @@ char *strcat(char *dest, const char *src) "testb %%al,%%al\n\t" "jne 1b" : "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3) - : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu): "memory"); + : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu) : "memory"); return dest; } EXPORT_SYMBOL(strcat); @@ -105,9 +105,9 @@ int strcmp(const char *cs, const char *ct) "2:\tsbbl %%eax,%%eax\n\t" "orb $1,%%al\n" "3:" - :"=a" (res), "=&S" (d0), "=&D" (d1) - :"1" (cs), "2" (ct) - :"memory"); + : "=a" (res), "=&S" (d0), "=&D" (d1) + : "1" (cs), "2" (ct) + : "memory"); return res; } EXPORT_SYMBOL(strcmp); @@ -130,9 +130,9 @@ int strncmp(const char *cs, const char *ct, size_t count) "3:\tsbbl %%eax,%%eax\n\t" "orb $1,%%al\n" "4:" - :"=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2) - :"1" (cs), "2" (ct), "3" (count) - :"memory"); + : "=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2) + : "1" (cs), "2" (ct), "3" (count) + : "memory"); return res; } EXPORT_SYMBOL(strncmp); @@ -152,9 +152,9 @@ char *strchr(const char *s, int c) "movl $1,%1\n" "2:\tmovl %1,%0\n\t" "decl %0" - :"=a" (res), "=&S" (d0) - :"1" (s), "0" (c) - :"memory"); + : "=a" (res), "=&S" (d0) + : "1" (s), "0" (c) + : "memory"); return res; } EXPORT_SYMBOL(strchr); @@ -169,9 +169,9 @@ size_t strlen(const char *s) "scasb\n\t" "notl %0\n\t" "decl %0" - :"=c" (res), "=&D" (d0) - :"1" (s), "a" (0), "0" (0xffffffffu) - :"memory"); + : "=c" (res), "=&D" (d0) + : "1" (s), "a" (0), "0" (0xffffffffu) + : "memory"); return res; } EXPORT_SYMBOL(strlen); @@ -189,9 +189,9 @@ void *memchr(const void *cs, int c, size_t count) "je 1f\n\t" "movl $1,%0\n" "1:\tdecl %0" - :"=D" (res), "=&c" (d0) - :"a" (c), "0" (cs), "1" (count) - :"memory"); + : "=D" (res), "=&c" (d0) + : "a" (c), "0" (cs), "1" (count) + : "memory"); return res; } EXPORT_SYMBOL(memchr); @@ -228,9 +228,9 @@ size_t strnlen(const char *s, size_t count) "cmpl $-1,%1\n\t" "jne 1b\n" "3:\tsubl %2,%0" - :"=a" (res), "=&d" (d0) - :"c" (s), "1" (count) - :"memory"); + : "=a" (res), "=&d" (d0) + : "c" (s), "1" (count) + : "memory"); return res; } EXPORT_SYMBOL(strnlen); diff --git a/arch/x86/lib/strstr_32.c b/arch/x86/lib/strstr_32.c index 42e8a50303f..8e2d55f754b 100644 --- a/arch/x86/lib/strstr_32.c +++ b/arch/x86/lib/strstr_32.c @@ -23,9 +23,9 @@ __asm__ __volatile__( "jne 1b\n\t" "xorl %%eax,%%eax\n\t" "2:" - :"=a" (__res), "=&c" (d0), "=&S" (d1) - :"0" (0), "1" (0xffffffff), "2" (cs), "g" (ct) - :"dx", "di"); + : "=a" (__res), "=&c" (d0), "=&S" (d1) + : "0" (0), "1" (0xffffffff), "2" (cs), "g" (ct) + : "dx", "di"); return __res; } diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 3d317836be9..3f2cf11f201 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -10,13 +10,15 @@ #include <asm/e820.h> #include <asm/setup.h> +#include <mach_ipi.h> + #ifdef CONFIG_HOTPLUG_CPU #define DEFAULT_SEND_IPI (1) #else #define DEFAULT_SEND_IPI (0) #endif -int no_broadcast=DEFAULT_SEND_IPI; +int no_broadcast = DEFAULT_SEND_IPI; /** * pre_intr_init_hook - initialisation prior to setting up interrupt vectors diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 62fa440678d..847c164725f 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -328,7 +328,7 @@ void __init initmem_init(unsigned long start_pfn, get_memcfg_numa(); - kva_pages = round_up(calculate_numa_remap_pages(), PTRS_PER_PTE); + kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE); kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE); do { diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index a20d1fa64b4..e7277cbcfb4 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st, * we have now. "break" is either changing perms, levels or * address space marker. */ - prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK); - cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK); + prot = pgprot_val(new_prot) & PTE_FLAGS_MASK; + cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK; if (!st->level) { /* First entry */ diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 455f3fe67b4..8f92cac4e6d 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -35,6 +35,7 @@ #include <asm/tlbflush.h> #include <asm/proto.h> #include <asm-generic/sections.h> +#include <asm/traps.h> /* * Page fault error code bits @@ -357,8 +358,6 @@ static int is_errata100(struct pt_regs *regs, unsigned long address) return 0; } -void do_invalid_op(struct pt_regs *, unsigned long); - static int is_f00f_bug(struct pt_regs *regs, unsigned long address) { #ifdef CONFIG_X86_F00F_BUG diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index d37f29376b0..6b9a9358b33 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -47,6 +47,7 @@ #include <asm/paravirt.h> #include <asm/setup.h> #include <asm/cacheflush.h> +#include <asm/smp.h> unsigned int __VMALLOC_RESERVE = 128 << 20; @@ -458,11 +459,7 @@ static void __init pagetable_init(void) { pgd_t *pgd_base = swapper_pg_dir; - paravirt_pagetable_setup_start(pgd_base); - permanent_kmaps_init(pgd_base); - - paravirt_pagetable_setup_done(pgd_base); } #ifdef CONFIG_ACPI_SLEEP diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index d3746efb060..770536ebf7e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -225,7 +225,7 @@ void __init init_extra_mapping_uc(unsigned long phys, unsigned long size) void __init cleanup_highmap(void) { unsigned long vaddr = __START_KERNEL_map; - unsigned long end = round_up((unsigned long)_end, PMD_SIZE) - 1; + unsigned long end = roundup((unsigned long)_end, PMD_SIZE) - 1; pmd_t *pmd = level2_kernel_pgt; pmd_t *last_pmd = pmd + PTRS_PER_PMD; @@ -451,14 +451,14 @@ static void __init find_early_table_space(unsigned long end) unsigned long puds, pmds, ptes, tables, start; puds = (end + PUD_SIZE - 1) >> PUD_SHIFT; - tables = round_up(puds * sizeof(pud_t), PAGE_SIZE); + tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); if (direct_gbpages) { unsigned long extra; extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT); pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT; } else pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT; - tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE); + tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE); if (cpu_has_pse) { unsigned long extra; @@ -466,7 +466,7 @@ static void __init find_early_table_space(unsigned long end) ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; } else ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT; - tables += round_up(ptes * sizeof(pte_t), PAGE_SIZE); + tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE); /* * RED-PEN putting page tables only on node 0 could diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index d4b6e6a29ae..cac6da54203 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -421,7 +421,7 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr) return; } -int __initdata early_ioremap_debug; +static int __initdata early_ioremap_debug; static int __init early_ioremap_debug_setup(char *str) { @@ -547,7 +547,7 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx) } -int __initdata early_ioremap_nested; +static int __initdata early_ioremap_nested; static int __init check_early_ioremap_leak(void) { diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index a4dd793d600..cebcbf152d4 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -79,7 +79,7 @@ static int __init allocate_cachealigned_memnodemap(void) return 0; addr = 0x8000; - nodemap_size = round_up(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES); + nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES); nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT, nodemap_size, L1_CACHE_BYTES); if (nodemap_addr == -1UL) { @@ -176,10 +176,10 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size; unsigned long bootmap_start, nodedata_phys; void *bootmap; - const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE); + const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); int nid; - start = round_up(start, ZONE_ALIGN); + start = roundup(start, ZONE_ALIGN); printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid, start, end); @@ -210,9 +210,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn); nid = phys_to_nid(nodedata_phys); if (nid == nodeid) - bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE); + bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE); else - bootmap_start = round_up(start, PAGE_SIZE); + bootmap_start = roundup(start, PAGE_SIZE); /* * SMP_CACHE_BYTES could be enough, but init_bootmem_node like * to use that to align to PAGE_SIZE diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 43e2f8483e4..898fad617ab 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -84,7 +84,7 @@ static inline unsigned long highmap_start_pfn(void) static inline unsigned long highmap_end_pfn(void) { - return __pa(round_up((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT; + return __pa(roundup((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT; } #endif @@ -906,11 +906,13 @@ int set_memory_ro(unsigned long addr, int numpages) { return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_RW)); } +EXPORT_SYMBOL_GPL(set_memory_ro); int set_memory_rw(unsigned long addr, int numpages) { return change_page_attr_set(addr, numpages, __pgprot(_PAGE_RW)); } +EXPORT_SYMBOL_GPL(set_memory_rw); int set_memory_np(unsigned long addr, int numpages) { diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index d50302774fe..86f2ffc43c3 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -63,10 +63,8 @@ static inline void pgd_list_del(pgd_t *pgd) #define UNSHARED_PTRS_PER_PGD \ (SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD) -static void pgd_ctor(void *p) +static void pgd_ctor(pgd_t *pgd) { - pgd_t *pgd = p; - /* If the pgd points to a shared pagetable level (either the ptes in non-PAE, or shared PMD in PAE), then just copy the references from swapper_pg_dir. */ @@ -87,7 +85,7 @@ static void pgd_ctor(void *p) pgd_list_add(pgd); } -static void pgd_dtor(void *pgd) +static void pgd_dtor(pgd_t *pgd) { unsigned long flags; /* can be called from interrupt context */ diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index cab0abbd1eb..0951db9ee51 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -123,7 +123,8 @@ static int __init parse_vmalloc(char *arg) if (!arg) return -EINVAL; - __VMALLOC_RESERVE = memparse(arg, &arg); + /* Add VMALLOC_OFFSET to the parsed value due to vm area guard hole*/ + __VMALLOC_RESERVE = memparse(arg, &arg) + VMALLOC_OFFSET; return 0; } early_param("vmalloc", parse_vmalloc); diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 0227694f7da..8a5f1614a3d 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -295,10 +295,12 @@ static void nmi_cpu_shutdown(void *dummy) static void nmi_shutdown(void) { - struct op_msrs *msrs = &get_cpu_var(cpu_msrs); + struct op_msrs *msrs; + nmi_enabled = 0; on_each_cpu(nmi_cpu_shutdown, NULL, 1); unregister_die_notifier(&profile_exceptions_nb); + msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); free_msrs(); put_cpu_var(cpu_msrs); diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c index 56b4757a1f4..43ac5af338d 100644 --- a/arch/x86/oprofile/op_model_p4.c +++ b/arch/x86/oprofile/op_model_p4.c @@ -10,11 +10,12 @@ #include <linux/oprofile.h> #include <linux/smp.h> +#include <linux/ptrace.h> +#include <linux/nmi.h> #include <asm/msr.h> -#include <asm/ptrace.h> #include <asm/fixmap.h> #include <asm/apic.h> -#include <asm/nmi.h> + #include "op_x86_model.h" #include "op_counter.h" @@ -40,7 +41,7 @@ static unsigned int num_controls = NUM_CONTROLS_NON_HT; static inline void setup_num_counters(void) { #ifdef CONFIG_SMP - if (smp_num_siblings == 2){ + if (smp_num_siblings == 2) { num_counters = NUM_COUNTERS_HT2; num_controls = NUM_CONTROLS_HT2; } @@ -86,7 +87,7 @@ struct p4_event_binding { #define CTR_FLAME_2 (1 << 6) #define CTR_IQ_5 (1 << 7) -static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = { +static struct p4_counter_binding p4_counters[NUM_COUNTERS_NON_HT] = { { CTR_BPU_0, MSR_P4_BPU_PERFCTR0, MSR_P4_BPU_CCCR0 }, { CTR_MS_0, MSR_P4_MS_PERFCTR0, MSR_P4_MS_CCCR0 }, { CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 }, @@ -97,32 +98,32 @@ static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = { { CTR_IQ_5, MSR_P4_IQ_PERFCTR5, MSR_P4_IQ_CCCR5 } }; -#define NUM_UNUSED_CCCRS NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT +#define NUM_UNUSED_CCCRS (NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT) /* p4 event codes in libop/op_event.h are indices into this table. */ static struct p4_event_binding p4_events[NUM_EVENTS] = { - + { /* BRANCH_RETIRED */ - 0x05, 0x06, + 0x05, 0x06, { {CTR_IQ_4, MSR_P4_CRU_ESCR2}, {CTR_IQ_5, MSR_P4_CRU_ESCR3} } }, - + { /* MISPRED_BRANCH_RETIRED */ - 0x04, 0x03, + 0x04, 0x03, { { CTR_IQ_4, MSR_P4_CRU_ESCR0}, { CTR_IQ_5, MSR_P4_CRU_ESCR1} } }, - + { /* TC_DELIVER_MODE */ 0x01, 0x01, - { { CTR_MS_0, MSR_P4_TC_ESCR0}, + { { CTR_MS_0, MSR_P4_TC_ESCR0}, { CTR_MS_2, MSR_P4_TC_ESCR1} } }, - + { /* BPU_FETCH_REQUEST */ - 0x00, 0x03, + 0x00, 0x03, { { CTR_BPU_0, MSR_P4_BPU_ESCR0}, { CTR_BPU_2, MSR_P4_BPU_ESCR1} } }, @@ -146,7 +147,7 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { }, { /* LOAD_PORT_REPLAY */ - 0x02, 0x04, + 0x02, 0x04, { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0}, { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} } }, @@ -170,43 +171,43 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { }, { /* BSQ_CACHE_REFERENCE */ - 0x07, 0x0c, + 0x07, 0x0c, { { CTR_BPU_0, MSR_P4_BSU_ESCR0}, { CTR_BPU_2, MSR_P4_BSU_ESCR1} } }, { /* IOQ_ALLOCATION */ - 0x06, 0x03, + 0x06, 0x03, { { CTR_BPU_0, MSR_P4_FSB_ESCR0}, { 0, 0 } } }, { /* IOQ_ACTIVE_ENTRIES */ - 0x06, 0x1a, + 0x06, 0x1a, { { CTR_BPU_2, MSR_P4_FSB_ESCR1}, { 0, 0 } } }, { /* FSB_DATA_ACTIVITY */ - 0x06, 0x17, + 0x06, 0x17, { { CTR_BPU_0, MSR_P4_FSB_ESCR0}, { CTR_BPU_2, MSR_P4_FSB_ESCR1} } }, { /* BSQ_ALLOCATION */ - 0x07, 0x05, + 0x07, 0x05, { { CTR_BPU_0, MSR_P4_BSU_ESCR0}, { 0, 0 } } }, { /* BSQ_ACTIVE_ENTRIES */ 0x07, 0x06, - { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */}, + { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */}, { 0, 0 } } }, { /* X87_ASSIST */ - 0x05, 0x03, + 0x05, 0x03, { { CTR_IQ_4, MSR_P4_CRU_ESCR2}, { CTR_IQ_5, MSR_P4_CRU_ESCR3} } }, @@ -216,21 +217,21 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, - + { /* PACKED_SP_UOP */ - 0x01, 0x08, + 0x01, 0x08, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, - + { /* PACKED_DP_UOP */ - 0x01, 0x0c, + 0x01, 0x0c, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, { /* SCALAR_SP_UOP */ - 0x01, 0x0a, + 0x01, 0x0a, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, @@ -242,31 +243,31 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { }, { /* 64BIT_MMX_UOP */ - 0x01, 0x02, + 0x01, 0x02, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, - + { /* 128BIT_MMX_UOP */ - 0x01, 0x1a, + 0x01, 0x1a, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, { /* X87_FP_UOP */ - 0x01, 0x04, + 0x01, 0x04, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, - + { /* X87_SIMD_MOVES_UOP */ - 0x01, 0x2e, + 0x01, 0x2e, { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0}, { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} } }, - + { /* MACHINE_CLEAR */ - 0x05, 0x02, + 0x05, 0x02, { { CTR_IQ_4, MSR_P4_CRU_ESCR2}, { CTR_IQ_5, MSR_P4_CRU_ESCR3} } }, @@ -276,9 +277,9 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { { { CTR_BPU_0, MSR_P4_FSB_ESCR0}, { CTR_BPU_2, MSR_P4_FSB_ESCR1} } }, - + { /* TC_MS_XFER */ - 0x00, 0x05, + 0x00, 0x05, { { CTR_MS_0, MSR_P4_MS_ESCR0}, { CTR_MS_2, MSR_P4_MS_ESCR1} } }, @@ -308,7 +309,7 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { }, { /* INSTR_RETIRED */ - 0x04, 0x02, + 0x04, 0x02, { { CTR_IQ_4, MSR_P4_CRU_ESCR0}, { CTR_IQ_5, MSR_P4_CRU_ESCR1} } }, @@ -319,14 +320,14 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { { CTR_IQ_5, MSR_P4_CRU_ESCR1} } }, - { /* UOP_TYPE */ - 0x02, 0x02, + { /* UOP_TYPE */ + 0x02, 0x02, { { CTR_IQ_4, MSR_P4_RAT_ESCR0}, { CTR_IQ_5, MSR_P4_RAT_ESCR1} } }, { /* RETIRED_MISPRED_BRANCH_TYPE */ - 0x02, 0x05, + 0x02, 0x05, { { CTR_MS_0, MSR_P4_TBPU_ESCR0}, { CTR_MS_2, MSR_P4_TBPU_ESCR1} } }, @@ -349,8 +350,8 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { #define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1)) #define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25)) #define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9)) -#define ESCR_READ(escr,high,ev,i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0) -#define ESCR_WRITE(escr,high,ev,i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0) +#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0) +#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0) #define CCCR_RESERVED_BITS 0x38030FFF #define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS) @@ -360,15 +361,15 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = { #define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27)) #define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12)) #define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12)) -#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0) -#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0) +#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0) +#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0) #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31)) #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31))) -#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) -#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) -#define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0) -#define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0) +#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) +#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) +#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0) +#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0) #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000)) @@ -380,7 +381,7 @@ static unsigned int get_stagger(void) #ifdef CONFIG_SMP int cpu = smp_processor_id(); return (cpu != first_cpu(per_cpu(cpu_sibling_map, cpu))); -#endif +#endif return 0; } @@ -395,25 +396,23 @@ static unsigned long reset_value[NUM_COUNTERS_NON_HT]; static void p4_fill_in_addresses(struct op_msrs * const msrs) { - unsigned int i; + unsigned int i; unsigned int addr, cccraddr, stag; setup_num_counters(); stag = get_stagger(); /* initialize some registers */ - for (i = 0; i < num_counters; ++i) { + for (i = 0; i < num_counters; ++i) msrs->counters[i].addr = 0; - } - for (i = 0; i < num_controls; ++i) { + for (i = 0; i < num_controls; ++i) msrs->controls[i].addr = 0; - } - + /* the counter & cccr registers we pay attention to */ for (i = 0; i < num_counters; ++i) { addr = p4_counters[VIRT_CTR(stag, i)].counter_address; cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address; - if (reserve_perfctr_nmi(addr)){ + if (reserve_perfctr_nmi(addr)) { msrs->counters[i].addr = addr; msrs->controls[i].addr = cccraddr; } @@ -447,22 +446,22 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs) if (reserve_evntsel_nmi(addr)) msrs->controls[i].addr = addr; } - + for (addr = MSR_P4_MS_ESCR0 + stag; - addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) { + addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) { if (reserve_evntsel_nmi(addr)) msrs->controls[i].addr = addr; } - + for (addr = MSR_P4_IX_ESCR0 + stag; - addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) { + addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) { if (reserve_evntsel_nmi(addr)) msrs->controls[i].addr = addr; } /* there are 2 remaining non-contiguously located ESCRs */ - if (num_counters == NUM_COUNTERS_NON_HT) { + if (num_counters == NUM_COUNTERS_NON_HT) { /* standard non-HT CPUs handle both remaining ESCRs*/ if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) msrs->controls[i++].addr = MSR_P4_CRU_ESCR5; @@ -498,20 +497,20 @@ static void pmc_setup_one_p4_counter(unsigned int ctr) unsigned int stag; stag = get_stagger(); - + /* convert from counter *number* to counter *bit* */ counter_bit = 1 << VIRT_CTR(stag, ctr); - + /* find our event binding structure. */ if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) { - printk(KERN_ERR - "oprofile: P4 event code 0x%lx out of range\n", + printk(KERN_ERR + "oprofile: P4 event code 0x%lx out of range\n", counter_config[ctr].event); return; } - + ev = &(p4_events[counter_config[ctr].event - 1]); - + for (i = 0; i < maxbind; i++) { if (ev->bindings[i].virt_counter & counter_bit) { @@ -526,25 +525,24 @@ static void pmc_setup_one_p4_counter(unsigned int ctr) ESCR_SET_OS_1(escr, counter_config[ctr].kernel); } ESCR_SET_EVENT_SELECT(escr, ev->event_select); - ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask); + ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask); ESCR_WRITE(escr, high, ev, i); - + /* modify CCCR */ CCCR_READ(cccr, high, VIRT_CTR(stag, ctr)); CCCR_CLEAR(cccr); CCCR_SET_REQUIRED_BITS(cccr); CCCR_SET_ESCR_SELECT(cccr, ev->escr_select); - if (stag == 0) { + if (stag == 0) CCCR_SET_PMI_OVF_0(cccr); - } else { + else CCCR_SET_PMI_OVF_1(cccr); - } CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr)); return; } } - printk(KERN_ERR + printk(KERN_ERR "oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n", counter_config[ctr].event, stag, ctr); } @@ -559,14 +557,14 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs) stag = get_stagger(); rdmsr(MSR_IA32_MISC_ENABLE, low, high); - if (! MISC_PMC_ENABLED_P(low)) { + if (!MISC_PMC_ENABLED_P(low)) { printk(KERN_ERR "oprofile: P4 PMC not available\n"); return; } /* clear the cccrs we will use */ for (i = 0 ; i < num_counters ; i++) { - if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + if (unlikely(!CTRL_IS_RESERVED(msrs, i))) continue; rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high); CCCR_CLEAR(low); @@ -576,14 +574,14 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs) /* clear all escrs (including those outside our concern) */ for (i = num_counters; i < num_controls; i++) { - if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + if (unlikely(!CTRL_IS_RESERVED(msrs, i))) continue; wrmsr(msrs->controls[i].addr, 0, 0); } /* setup all counters */ for (i = 0 ; i < num_counters ; ++i) { - if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs,i))) { + if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) { reset_value[i] = counter_config[i].count; pmc_setup_one_p4_counter(i); CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i)); @@ -603,11 +601,11 @@ static int p4_check_ctrs(struct pt_regs * const regs, stag = get_stagger(); for (i = 0; i < num_counters; ++i) { - - if (!reset_value[i]) + + if (!reset_value[i]) continue; - /* + /* * there is some eccentricity in the hardware which * requires that we perform 2 extra corrections: * @@ -616,24 +614,24 @@ static int p4_check_ctrs(struct pt_regs * const regs, * * - write the counter back twice to ensure it gets * updated properly. - * + * * the former seems to be related to extra NMIs happening * during the current NMI; the latter is reported as errata * N15 in intel doc 249199-029, pentium 4 specification * update, though their suggested work-around does not * appear to solve the problem. */ - + real = VIRT_CTR(stag, i); CCCR_READ(low, high, real); - CTR_READ(ctr, high, real); + CTR_READ(ctr, high, real); if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) { oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], real); + CTR_WRITE(reset_value[i], real); CCCR_CLEAR_OVF(low); CCCR_WRITE(low, high, real); - CTR_WRITE(reset_value[i], real); + CTR_WRITE(reset_value[i], real); } } @@ -683,15 +681,16 @@ static void p4_shutdown(struct op_msrs const * const msrs) int i; for (i = 0 ; i < num_counters ; ++i) { - if (CTR_IS_RESERVED(msrs,i)) + if (CTR_IS_RESERVED(msrs, i)) release_perfctr_nmi(msrs->counters[i].addr); } - /* some of the control registers are specially reserved in + /* + * some of the control registers are specially reserved in * conjunction with the counter registers (hence the starting offset). * This saves a few bits. */ for (i = num_counters ; i < num_controls ; ++i) { - if (CTRL_IS_RESERVED(msrs,i)) + if (CTRL_IS_RESERVED(msrs, i)) release_evntsel_nmi(msrs->controls[i].addr); } } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 6a0fca78c36..22e057665e5 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -580,7 +580,7 @@ static int __cpuinit amd_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { int cpu = (long)hcpu; - switch(action) { + switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index d765da91384..8791fc55e71 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -31,11 +31,8 @@ #include <linux/ioport.h> #include <linux/errno.h> #include <linux/bootmem.h> -#include <linux/acpi.h> #include <asm/pat.h> -#include <asm/hpet.h> -#include <asm/io_apic.h> #include "pci.h" @@ -80,77 +77,6 @@ pcibios_align_resource(void *data, struct resource *res, } EXPORT_SYMBOL(pcibios_align_resource); -static int check_res_with_valid(struct pci_dev *dev, struct resource *res) -{ - unsigned long base; - unsigned long size; - int i; - - base = res->start; - size = (res->start == 0 && res->end == res->start) ? 0 : - (res->end - res->start + 1); - - if (!base || !size) - return 0; - -#ifdef CONFIG_HPET_TIMER - /* for hpet */ - if (base == hpet_address && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } -#endif - -#ifdef CONFIG_X86_IO_APIC - for (i = 0; i < nr_ioapics; i++) { - unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr; - - if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } - } -#endif - -#ifdef CONFIG_PCI_MMCONFIG - for (i = 0; i < pci_mmcfg_config_num; i++) { - unsigned long addr; - - addr = pci_mmcfg_config[i].address; - if (base == addr && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } - } -#endif - - return 0; -} - -static int check_platform(struct pci_dev *dev, struct resource *res) -{ - struct resource *root = NULL; - - /* - * forcibly insert it into the - * resource tree - */ - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - else if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - - if (root && check_res_with_valid(dev, res)) { - insert_resource(root, res); - - return 1; - } - - return 0; -} /* * Handle resources of PCI devices. If the world were perfect, we could * just allocate all the resource regions and do nothing more. It isn't. @@ -202,10 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { - if (check_platform(dev, r)) - continue; - dev_err(&dev->dev, "BAR %d: can't " - "allocate resource\n", idx); + dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -240,17 +163,13 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - dev_dbg(&dev->dev, "resource %#08llx-%#08llx " - "(f=%lx, d=%d, p=%d)\n", + dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n", (unsigned long long) r->start, (unsigned long long) r->end, r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - if (check_platform(dev, r)) - continue; - dev_err(&dev->dev, "BAR %d: can't " - "allocate resource\n", idx); + dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 8e077185e18..006599db0dc 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -1043,35 +1043,44 @@ static void __init pcibios_fixup_irqs(void) if (io_apic_assign_pci_irqs) { int irq; - if (pin) { - /* - * interrupt pins are numbered starting - * from 1 - */ - pin--; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin); - /* - * Busses behind bridges are typically not listed in the MP-table. - * In this case we have to look up the IRQ based on the parent bus, - * parent slot, and pin number. The SMP code detects such bridged - * busses itself so we should get into this branch reliably. - */ - if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev *bridge = dev->bus->self; - - pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin); - if (irq >= 0) - dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n", - pci_name(bridge), - 'A' + pin, irq); - } - if (irq >= 0) { - dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq); - dev->irq = irq; - } + if (!pin) + continue; + + /* + * interrupt pins are numbered starting from 1 + */ + pin--; + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), pin); + /* + * Busses behind bridges are typically not listed in the + * MP-table. In this case we have to look up the IRQ + * based on the parent bus, parent slot, and pin number. + * The SMP code detects such bridged busses itself so we + * should get into this branch reliably. + */ + if (irq < 0 && dev->bus->parent) { + /* go back to the bridge */ + struct pci_dev *bridge = dev->bus->self; + int bus; + + pin = (pin + PCI_SLOT(dev->devfn)) % 4; + bus = bridge->bus->number; + irq = IO_APIC_get_PCI_irq_vector(bus, + PCI_SLOT(bridge->devfn), pin); + if (irq >= 0) + dev_warn(&dev->dev, + "using bridge %s INT %c to " + "get IRQ %d\n", + pci_name(bridge), + 'A' + pin, irq); + } + if (irq >= 0) { + dev_info(&dev->dev, + "PCI->APIC IRQ transform: INT %c " + "-> IRQ %d\n", + 'A' + pin, irq); + dev->irq = irq; } } #endif diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S index 4fc7e872c85..d1e9b53f9d3 100644 --- a/arch/x86/power/hibernate_asm_32.S +++ b/arch/x86/power/hibernate_asm_32.S @@ -1,5 +1,3 @@ -.text - /* * This may not use any stack, nor any variable that is not "NoSave": * @@ -12,17 +10,18 @@ #include <asm/segment.h> #include <asm/page.h> #include <asm/asm-offsets.h> +#include <asm/processor-flags.h> - .text +.text ENTRY(swsusp_arch_suspend) - movl %esp, saved_context_esp movl %ebx, saved_context_ebx movl %ebp, saved_context_ebp movl %esi, saved_context_esi movl %edi, saved_context_edi - pushfl ; popl saved_context_eflags + pushfl + popl saved_context_eflags call swsusp_save ret @@ -59,7 +58,7 @@ done: movl mmu_cr4_features, %ecx jecxz 1f # cr4 Pentium and higher, skip if zero movl %ecx, %edx - andl $~(1<<7), %edx; # PGE + andl $~(X86_CR4_PGE), %edx movl %edx, %cr4; # turn off PGE 1: movl %cr3, %eax; # flush TLB @@ -74,7 +73,8 @@ done: movl saved_context_esi, %esi movl saved_context_edi, %edi - pushl saved_context_eflags ; popfl + pushl saved_context_eflags + popfl xorl %eax, %eax diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 9ff6e3cbf08..7dcd321a050 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -812,7 +812,7 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high) /* Early in boot, while setting up the initial pagetable, assume everything is pinned. */ -static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn) +static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) { #ifdef CONFIG_FLATMEM BUG_ON(mem_map); /* should only be used early */ @@ -822,7 +822,7 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn) /* Early release_pte assumes that all pts are pinned, since there's only init_mm and anything attached to that is pinned. */ -static void xen_release_pte_init(u32 pfn) +static void xen_release_pte_init(unsigned long pfn) { make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } @@ -838,7 +838,7 @@ static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) /* This needs to make sure the new pte page is pinned iff its being attached to a pinned pagetable. */ -static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) +static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level) { struct page *page = pfn_to_page(pfn); @@ -856,12 +856,12 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) } } -static void xen_alloc_pte(struct mm_struct *mm, u32 pfn) +static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn) { xen_alloc_ptpage(mm, pfn, PT_PTE); } -static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn) +static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn) { xen_alloc_ptpage(mm, pfn, PT_PMD); } @@ -909,7 +909,7 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd) } /* This should never happen until we're OK to use struct page */ -static void xen_release_ptpage(u32 pfn, unsigned level) +static void xen_release_ptpage(unsigned long pfn, unsigned level) { struct page *page = pfn_to_page(pfn); @@ -923,23 +923,23 @@ static void xen_release_ptpage(u32 pfn, unsigned level) } } -static void xen_release_pte(u32 pfn) +static void xen_release_pte(unsigned long pfn) { xen_release_ptpage(pfn, PT_PTE); } -static void xen_release_pmd(u32 pfn) +static void xen_release_pmd(unsigned long pfn) { xen_release_ptpage(pfn, PT_PMD); } #if PAGETABLE_LEVELS == 4 -static void xen_alloc_pud(struct mm_struct *mm, u32 pfn) +static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn) { xen_alloc_ptpage(mm, pfn, PT_PUD); } -static void xen_release_pud(u32 pfn) +static void xen_release_pud(unsigned long pfn) { xen_release_ptpage(pfn, PT_PUD); } @@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .ptep_modify_prot_commit = __ptep_modify_prot_commit, .pte_val = xen_pte_val, - .pte_flags = native_pte_val, + .pte_flags = native_pte_flags, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b6acc3a0af4..d6790108388 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -42,7 +42,7 @@ char * __init xen_memory_setup(void) e820.nr_map = 0; - e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM); + e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM); /* * Even though this is normal, usable memory under Xen, reserve |