diff options
Diffstat (limited to 'arch/arm')
44 files changed, 341 insertions, 222 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 233a222752c..4f8760d7b7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -688,6 +688,7 @@ config ARCH_DAVINCI select HAVE_IDE select COMMON_CLKDEV select GENERIC_ALLOCATOR + select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's DaVinci platform. diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a9b650dcc17..077ecf4fecd 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM355 EVM", .ccdc = "DM355 CCDC", diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 289fe1b7d25..b476395d2cd 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; -#ifdef CONFIG_KEYBOARD_DAVINCI +static int dm365evm_keyscan_enable(struct device *dev) +{ + return davinci_cfg_reg(DM365_KEYSCAN); +} + static unsigned short dm365evm_keymap[] = { KEY_KP2, KEY_LEFT, @@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = { }; static struct davinci_ks_platform_data dm365evm_ks_data = { + .device_enable = dm365evm_keyscan_enable, .keymap = dm365evm_keymap, .keymapsize = ARRAY_SIZE(dm365evm_keymap), .rep = 1, @@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = { .interval = 0x2, .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, }; -#endif static int cpld_mmc_get_cd(int module) { @@ -511,10 +515,7 @@ static __init void dm365_evm_init(void) dm365_init_asp(&dm365_evm_snd_data); dm365_init_rtc(); - -#ifdef CONFIG_KEYBOARD_DAVINCI dm365_init_ks(&dm365evm_ks_data); -#endif } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index fd0398bc6db..e9612cf727b 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = { static struct vpfe_config vpfe_cfg = { .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .i2c_adapter_id = 1, .sub_devs = vpfe_sub_devs, .card_name = "DM6446 EVM", .ccdc = "DM6446 CCDC", diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 52b287cf3a4..37311d1830e 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) return 0; } +/* + * Faking this allows us to to work with suspend functions of + * generic drivers which call {enable|disable}_irq_wake for + * wake up interrupt sources (eg RTC on DA850). + */ +static int cp_intc_set_wake(unsigned int irq, unsigned int on) +{ + return 0; +} + static struct irq_chip cp_intc_irq_chip = { .name = "cp_intc", .ack = cp_intc_ack_irq, .mask = cp_intc_mask_irq, .unmask = cp_intc_unmask_irq, .set_type = cp_intc_set_irq_type, + .set_wake = cp_intc_set_wake, }; void __init cp_intc_init(void __iomem *base, unsigned short num_irq, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index dd2d32c4ce8..a5105f03fd8 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = { int da8xx_register_rtc(void) { + int ret; + /* Unlock the rtc's registers */ __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); - return platform_device_register(&da8xx_rtc_device); + ret = platform_device_register(&da8xx_rtc_device); + if (!ret) + /* Atleast on DA850, RTC is a wakeup source */ + device_init_wakeup(&da8xx_rtc_device.dev, true); + + return ret; } static struct resource da8xx_cpuidle_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 2ec619ec165..f53735cb922 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata) void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) { - davinci_cfg_reg(DM365_KEYSCAN); dm365_ks_device.dev.platform_data = pdata; platform_device_register(&dm365_ks_device); } diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 8f49b2b1260..b22dec4abf7 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -24,8 +24,6 @@ #include "common.h" -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ GPIO47_UART2_RXD, diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c index 03dbbdc9895..8bcc1a5b882 100644 --- a/arch/arm/mach-mx2/mxt_td60.c +++ b/arch/arm/mach-mx2/mxt_td60.c @@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = { PE9_PF_UART3_RXD, PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, - /* UART3 */ - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, - /* UART4 */ - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS, - /* UART5 */ - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS, /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = { .flags = IMXUART_HAVE_RTSCTS, }, { .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); - mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); - mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index ef26951a527..6e838b85771 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL); +DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) }; int __init mx25_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 63511de3a55..9fdeea1c083 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -419,3 +419,22 @@ int __init mxc_register_gpios(void) return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } +static struct resource mx25_fec_resources[] = { + { + .start = MX25_FEC_BASE_ADDR, + .end = MX25_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_FEC, + .end = MX25_INT_FEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_fec_resources), + .resource = mx25_fec_resources, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index fe6bf88ad1d..fe5420fcd11 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device; extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; +extern struct platform_device mx25_fec_device; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index d23ae571c03..921bc99ea23 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -18,10 +18,11 @@ #include <linux/types.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/smsc911x.h> +#include <linux/fec.h> #include <linux/platform_device.h> #include <mach/hardware.h> @@ -35,16 +36,57 @@ #include <mach/mx25.h> #include <mach/mxc_nand.h> #include "devices.h" -#include <mach/iomux-v3.h> +#include <mach/iomux.h> static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct pad_desc mx25pdk_pads[] = { + MX25_PAD_FEC_MDC__FEC_MDC, + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_TDATA0__FEC_TDATA0, + MX25_PAD_FEC_TDATA1__FEC_TDATA1, + MX25_PAD_FEC_TX_EN__FEC_TX_EN, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ + MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ +}; + +static struct fec_platform_data mx25_fec_pdata = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +#define FEC_ENABLE_GPIO 35 +#define FEC_RESET_B_GPIO 104 + +static void __init mx25pdk_fec_reset(void) +{ + gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); + gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); + + gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ + gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ + udelay(2); + + /* turn on PHY power and lift reset */ + gpio_set_value(FEC_ENABLE_GPIO, 1); + gpio_set_value(FEC_RESET_B_GPIO, 1); +} + static void __init mx25pdk_init(void) { + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, + ARRAY_SIZE(mx25pdk_pads)); + mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); + + mx25pdk_fec_reset(); + mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); } static void __init mx25pdk_timer_init(void) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index ea8ed109a7c..28294416b0a 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -49,6 +49,7 @@ config MACH_PCM037_EET config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -63,7 +64,7 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - select MXC_ULPI + select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index bedf5b8d976..6858a4f9806 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), .length = AIPS2_SIZE, .type = MT_DEVICE_NONSHARED + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED }, }; diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 0497c152be1..3e7bafa2ddb 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -494,11 +494,6 @@ static void mxc_init_i2c(void) */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE / 2, diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index def6b673659..789b20d1730 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { * USB */ +#if defined(CONFIG_USB_ULPI) #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; +#endif /* * NOR flash @@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE, @@ -261,11 +258,13 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_spi_device1, &spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); +#if defined(CONFIG_USB_ULPI) /* USB */ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 8fc624f141c..438428eaf76 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 85184a35e67..1f44b9ccbb0 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void) usbh1_pdata.otg = otg; - return mxc_register_device(&mx31_usbh1, &usbh1_pdata); + return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } /* diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index b7052914593..cfd605d078e 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; +#if defined(CONFIG_USB_ULPI) + #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) static int moboard_usbh2_hw_init(struct platform_device *pdev) @@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void) usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - return mxc_register_device(&mx31_usbh2, &usbh2_pdata); + return mxc_register_device(&mxc_usbh2, &usbh2_pdata); } +#else +static inline int moboard_usbh2_init(void) { return 0; } +#endif static struct gpio_led mx31moboard_leds[] = { diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index 0f7a2f06bc2..18715f1aa7e 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void) */ static struct map_desc mx31pdk_io_desc[] __initdata = { { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED, - }, { .virtual = CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS5_BASE_ADDR), .length = CS5_SIZE, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 6cbaabedf38..5be396917c9 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on) return 0; } -static struct i2c_board_info pcm037_i2c_2_devices[] = { +static struct i2c_board_info pcm037_i2c_camera[] = { { I2C_BOARD_INFO("mt9t031", 0x5d), + }, { + I2C_BOARD_INFO("mt9v022", 0x48), }, }; -static struct soc_camera_link iclink = { +static struct soc_camera_link iclink_mt9v022 = { + .bus_id = 0, /* Must match with the camera ID */ + .board_info = &pcm037_i2c_camera[1], + .i2c_adapter_id = 2, + .module_name = "mt9v022", +}; + +static struct soc_camera_link iclink_mt9t031 = { .bus_id = 0, /* Must match with the camera ID */ .power = pcm037_camera_power, - .board_info = &pcm037_i2c_2_devices[0], + .board_info = &pcm037_i2c_camera[0], .i2c_adapter_id = 2, .module_name = "mt9t031", }; @@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = { } }; -static struct platform_device pcm037_camera = { +static struct platform_device pcm037_mt9t031 = { .name = "soc-camera-pdrv", .id = 0, .dev = { - .platform_data = &iclink, + .platform_data = &iclink_mt9t031, + }, +}; + +static struct platform_device pcm037_mt9v022 = { + .name = "soc-camera-pdrv", + .id = 1, + .dev = { + .platform_data = &iclink_mt9v022, }, }; @@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size) static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, - &pcm037_camera, + &pcm037_mt9t031, + &pcm037_mt9v022, }; static struct ipu_platform_data mx3_ipu_data = { @@ -599,7 +617,7 @@ static void __init mxc_board_init(void) if (!ret) gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); else - iclink.power = NULL; + iclink_mt9t031.power = NULL; if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) mxc_register_device(&mx3_camera, &camera_pdata); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8a0837ea029..dee92182749 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,8 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx + select CPU_PXA300 + select CPU_PXA310 select PXA_SSP config MACH_TAVOREVB diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index bf6785adccf..9edf645368d 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -8,13 +8,6 @@ /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - extern int gpio_eth_irq; extern int gpio_debug_led1; extern int gpio_debug_led2; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index f28c1715b91..fa527b258d6 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { GPIO7_MMC1_CLK, GPIO8_MMC1_CMD, GPIO15_GPIO, /* card detect */ + + /* UART3 */ + GPIO107_UART3_CTS, + GPIO108_UART3_RTS, + GPIO109_UART3_TXD, + GPIO110_UART3_RXD, }; static struct resource smc91x_resources[] = { diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index e5eeb3a62d0..c2b938a4d5c 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = { .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, - .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT, + .gpio_card_detect = POODLE_GPIO_nSD_DETECT, .gpio_card_ro = POODLE_GPIO_nSD_WP, .gpio_power = -1, }; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 5b986a8bd9e..75f2a37f945 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/apm-emulation.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -626,8 +627,27 @@ static void zeus_power_off(void) pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); } -int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, - unsigned ngpio, void *context) +#ifdef CONFIG_APM_EMULATION +static void zeus_get_power_status(struct apm_power_info *info) +{ + /* Power supply is always present */ + info->ac_line_status = APM_AC_ONLINE; + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT; +} + +static inline void zeus_setup_apm(void) +{ + apm_get_power_status = zeus_get_power_status; +} +#else +static inline void zeus_setup_apm(void) +{ +} +#endif + +static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *context) { int i; u8 pcb_info = 0; @@ -726,9 +746,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = { GPIO99_GPIO, /* CF RDY */ }; +/* + * DM9k MSCx settings: SRAM, 16 bits + * 17 cycles delay first access + * 5 cycles delay next access + * 13 cycles recovery time + * faster device + */ +#define DM9K_MSC_VALUE 0xe4c9 + static void __init zeus_init(void) { - u16 dm9000_msc = 0xe279; + u16 dm9000_msc = DM9K_MSC_VALUE; system_rev = __raw_readw(ZEUS_CPLD_VERSION); pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f)); @@ -738,6 +767,7 @@ static void __init zeus_init(void) MSC1 = (MSC1 & 0xffff0000) | dm9000_msc; pm_power_off = zeus_power_off; + zeus_setup_apm(); pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index b66e9e2d06e..2b4043c04d0 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -36,9 +36,6 @@ #include "devices.h" #include "generic.h" -#define MAX_SLOTS 3 -struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; - int gpio_eth_irq; int gpio_debug_led1; int gpio_debug_led2; @@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {} #endif #if defined(CONFIG_MMC) -static int zylonite_mci_ro(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); -} - -static int zylonite_mci_init(struct device *dev, - irq_handler_t zylonite_detect_int, - void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int err, cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - /* - * setup GPIO for Zylonite MMC controller - */ - err = gpio_request(gpio_cd, "mmc card detect"); - if (err) - goto err_request_cd; - gpio_direction_input(gpio_cd); - - err = gpio_request(gpio_wp, "mmc write protect"); - if (err) - goto err_request_wp; - gpio_direction_input(gpio_wp); - - err = request_irq(cd_irq, zylonite_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - printk(KERN_ERR "%s: MMC/SD/SDIO: " - "can't request card detect IRQ\n", __func__); - goto err_request_irq; - } - - return 0; - -err_request_irq: - gpio_free(gpio_wp); -err_request_wp: - gpio_free(gpio_cd); -err_request_cd: - return err; -} - -static void zylonite_mci_exit(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - free_irq(cd_irq, data); - gpio_free(gpio_cd); - gpio_free(gpio_wp); -} - static struct pxamci_platform_data zylonite_mci_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = zylonite_mci_init, - .exit = zylonite_mci_exit, - .get_ro = zylonite_mci_ro, - .gpio_card_detect = -1, - .gpio_card_ro = -1, + .gpio_card_detect = EXT_GPIO(0), + .gpio_card_ro = EXT_GPIO(2), .gpio_power = -1, }; static struct pxamci_platform_data zylonite_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(1), + .gpio_card_ro = EXT_GPIO(3), + .gpio_power = -1, +}; + +static struct pxamci_platform_data zylonite_mci3_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(30), + .gpio_card_ro = EXT_GPIO(31), + .gpio_power = -1, }; static void __init zylonite_init_mmc(void) @@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void) pxa_set_mci_info(&zylonite_mci_platform_data); pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); if (cpu_is_pxa310()) - pxa3xx_set_mci3_info(&zylonite_mci_platform_data); + pxa3xx_set_mci3_info(&zylonite_mci3_platform_data); } #else static inline void zylonite_init_mmc(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 84095440a87..3aa73b3e33f 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO22_I2C_SDA, /* GPIO */ - GPIO18_GPIO, /* GPIO Expander #0 INT_N */ - GPIO19_GPIO, /* GPIO Expander #1 INT_N */ + GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { @@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void) /* detect LCD panel */ zylonite_detect_lcd_panel(); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); - zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); @@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); - - /* MMC card detect & write protect for controller 2 */ - zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); - zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } /* GPIOs for Debug LEDs */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 60d08f23f5e..9942bac4cf7 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void) gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2); gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); - zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h new file mode 100644 index 00000000000..dc361700d69 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/ts.h @@ -0,0 +1,21 @@ +/* linux/include/asm/arch-s3c2410/ts.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4c79ac8a6c3..97162fdd059 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -279,6 +279,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "SmartMedia", .nr_chips = 1, .nr_map = smartmedia_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -293,6 +294,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, }, @@ -300,6 +302,7 @@ static struct s3c2410_nand_set __initdata bast_nand_sets[] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), .partitions = bast_default_nand_part, } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 49053254c98..1e34abe1a19 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,6 +46,7 @@ #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> +#include <mach/ts.h> #include <plat/udc.h> #include <plat/iic.h> @@ -140,6 +141,11 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { .vbus_pin_inverted = 1, }; +static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; /** * Set lcd on or off @@ -265,6 +271,7 @@ static struct platform_device h1940_lcd_powerdev = { }; static struct platform_device *h1940_devices[] __initdata = { + &s3c_device_ts, &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -305,6 +312,7 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); s3c24xx_udc_set_platdata(&h1940_udc_cfg); + s3c24xx_ts_set_platdata(&h1940_ts_cfg); s3c_i2c0_set_platdata(NULL); s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 015dfb2a80d..f35371db33f 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -208,6 +208,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "External", .nr_chips = 1, .nr_map = external_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, @@ -222,6 +223,7 @@ static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, + .options = NAND_SCAN_SILENT_NODEV, .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), .partitions = osiris_default_nand_part, }, diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h index 94064006685..ce228bdc66d 100644 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ b/arch/arm/mach-w90x900/include/mach/system.h @@ -15,7 +15,15 @@ * */ +#include <linux/io.h> #include <asm/proc-fns.h> +#include <mach/map.h> +#include <mach/regs-timer.h> + +#define WTCR (TMR_BA + 0x1C) +#define WTCLK (1 << 10) +#define WTE (1 << 7) +#define WTRE (1 << 1) static void arch_idle(void) { @@ -23,6 +31,11 @@ static void arch_idle(void) static void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + if (mode == 's') { + /* Jump into ROM at address 0 */ + cpu_reset(0); + } else { + __raw_writel(WTE | WTRE | WTCLK, WTCR); + } } diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index 4128af870b4..b80f769bc13 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -42,7 +42,10 @@ #define TICKS_PER_SEC 100 #define PRESCALE 0x63 /* Divider = prescale + 1 */ -unsigned int timer0_load; +#define TDR_SHIFT 24 +#define TDR_MASK ((1 << TDR_SHIFT) - 1) + +static unsigned int timer0_load; static void nuc900_clockevent_setmode(enum clock_event_mode mode, struct clock_event_device *clk) @@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt, static struct clock_event_device nuc900_clockevent_device = { .name = "nuc900-timer0", .shift = 32, - .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = nuc900_clockevent_setmode, .set_next_event = nuc900_clockevent_setnextevent, .rating = 300, @@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = { .handler = nuc900_timer0_interrupt, }; -static void __init nuc900_clockevents_init(unsigned int rate) +static void __init nuc900_clockevents_init(void) { + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer0"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR0); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); + + timer0_load = (rate / TICKS_PER_SEC); + + __raw_writel(RESETINT, REG_TISR); + setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); + nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, nuc900_clockevent_device.shift); nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, @@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate) static cycle_t nuc900_get_cycles(struct clocksource *cs) { - return ~__raw_readl(REG_TDR1); + return (~__raw_readl(REG_TDR1)) & TDR_MASK; } static struct clocksource clocksource_nuc900 = { .name = "nuc900-timer1", .rating = 200, .read = nuc900_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, + .mask = CLOCKSOURCE_MASK(TDR_SHIFT), + .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init nuc900_clocksource_init(unsigned int rate) +static void __init nuc900_clocksource_init(void) { unsigned int val; + unsigned int rate; + struct clk *clk = clk_get(NULL, "timer1"); + + BUG_ON(IS_ERR(clk)); + + __raw_writel(0x00, REG_TCSR1); + + clk_enable(clk); + rate = clk_get_rate(clk) / (PRESCALE + 1); __raw_writel(0xffffffff, REG_TICR1); val = __raw_readl(REG_TCSR1); - val |= (COUNTEN | PERIOD); + val |= (COUNTEN | PERIOD | PRESCALE); __raw_writel(val, REG_TCSR1); clocksource_nuc900.mult = @@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate) static void __init nuc900_timer_init(void) { - struct clk *ck_ext = clk_get(NULL, "ext"); - unsigned int rate; - - BUG_ON(IS_ERR(ck_ext)); - - rate = clk_get_rate(ck_ext); - clk_put(ck_ext); - rate = rate / (PRESCALE + 0x01); - - /* set a known state */ - __raw_writel(0x00, REG_TCSR0); - __raw_writel(0x00, REG_TCSR1); - __raw_writel(RESETINT, REG_TISR); - timer0_load = (rate / TICKS_PER_SEC); - - setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); - - nuc900_clocksource_init(rate); - nuc900_clockevents_init(rate); + nuc900_clocksource_init(); + nuc900_clockevents_init(); } struct sys_timer nuc900_timer = { diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index a26a605b73b..0cb1848bd87 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range) asid r3, r3 @ mask ASID orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT - vma_vm_flags r2, r2 @ get vma->vm_flags 1: #ifdef CONFIG_SMP mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 810c47f56e7..9af494f0ab3 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -58,19 +58,19 @@ #define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL) +#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL) #define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL) +#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL) #define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL) +#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL) #define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL) +#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL) #define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) @@ -80,11 +80,11 @@ #define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL) +#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL) #define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL) +#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) @@ -112,7 +112,7 @@ #define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) #define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) @@ -229,28 +229,28 @@ #define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL) +#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) #define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL) +#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) #define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL) +#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) #define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL) +#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) #define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL) +#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL) +#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) #define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) @@ -265,7 +265,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL) +#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) #define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) @@ -354,19 +354,19 @@ #define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL) +#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) @@ -377,11 +377,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL) +#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) @@ -410,7 +410,7 @@ #define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) @@ -418,23 +418,23 @@ #define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) #define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL) +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL) +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) #define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 91e73814480..854e2dc5848 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -41,4 +41,8 @@ #define UART1_BASE_ADDR 0x43f90000 #define UART2_BASE_ADDR 0x43f94000 +#define MX25_FEC_BASE_ADDR 0x50038000 + +#define MX25_INT_FEC 57 + #endif /* __MACH_MX25_H__ */ diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index a9eabdcfa16..51dc5c8106c 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); kfree(pwm); diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index e771e77dcd5..84808ccda70 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -114,7 +114,7 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) for (i = 0; i < npd->nr_sets; i++) { ret = s3c_nand_copy_set(to); - if (!ret) { + if (ret) { printk(KERN_ERR "%s: failed to copy set %d\n", __func__, i); return; @@ -122,6 +122,8 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) to++; } } + + s3c_device_nand.dev.platform_data = npd; } EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 932cbbbb427..c1c20b02391 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -31,6 +31,7 @@ extern struct platform_device s3c64xx_device_iisv4; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; +extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index f52a92ce8dd..7f686a31e67 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -37,6 +37,8 @@ #include <plat/cpu.h> #include <plat/regs-spi.h> +#include <mach/ts.h> + /* Serial port registrations */ static struct resource s3c2410_uart0_resource[] = { @@ -182,6 +184,22 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } } +/* Touchscreen */ +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, +}; +EXPORT_SYMBOL(s3c_device_ts); + +static struct s3c2410_ts_mach_info s3c2410ts_info; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info)); + s3c_device_ts.dev.platform_data = &s3c2410ts_info; +} +EXPORT_SYMBOL(s3c24xx_ts_set_platdata); + /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 1364317d421..12623a474b5 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -70,6 +70,7 @@ void __init s3c244x_map_io(void) s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c0.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; + s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } |